0自由出口技术合同登记证书精选9篇
发布于2024-11-14 21:28，全文约 70487 字
篇1：技术转让和设备、材料进口合同_合同范本
技术转让和设备、材料进口合同
中国_____________产品进出口公司和上海______________产品生产厂（以下简称中方）与英国_____________广播有限公司（以下简投资人）和德国_____________贸易有限公司（以下简称alp）签订本合同，其条款如下：
第一条 技术转让
（1）中方为在上海生产投资人的甲型和乙型产品而引进必需的技术。这些产品以下简称为产品。
（2）投资人应中方要求按本合同提供其拥有的制造产品所需的技术和资料。
（3）产品的名称规格详见附件一。
（4）投资人应向中方提供制造产品所需的贸易秘密、制造技术和专有技术方面的资料。
投资人向中方提供的资料详见附件二。
第二条 设备规划
（1）中方必须按照投资人的建议准备产品生产设施。
（2）为了帮助在上海准备生产设施，投资人应提供援助，包括供应下列资料：
①生产线计划。
②生产劳动力安排计划。
③设备布局计划。
④基础设施计划，如水电供应、空调、运输、通讯等。
⑤设备安装操作计划。
⑥生产管理计划。
⑦推销计划。
上述资料应于本合同生效后60天内由投资人提供中方。
（3）生产线必须按照附于本合同的生产细目表，即附件三。
（4）中方应自行准备生产计划，但必要时可要求投资人给予合作。
第三条 许可费的支付
（1）投资人向中方转让技术的许可费如下：
①中方向投资人购买产品生产权应交入门费____________美元。
②每件出售的产品应向投资人交付售价3％的提成费。
（2）一切付款应按照本合同及本条款的有关约定事项办理。
（3）一切付款应通过中国银行办理。
（4）支付方式采用不可撤销的即期信用证，用美元支付。
（5）中方应在本合同生效后一个月内，开立不可撤销的信用证向投资人支付入门费。
（6）投资人应在收到上述信用证后30天内提供合同规定的一切技术资料。
（7）中方每次向投资人订购合同规定的材料时，应在信用证的金额中加上3％的提成费；也可在支付货款时，为提成费另开一份信用证。
（8）中方负责在中国发生的一切费用；投资人负责在国外发生的一切费用。
第四条 销售
（1）投资人应帮助中方兴趣办展销会、研讨会、广告宣传等，以推销中方生产的产品。但费用应由中方负担。
（2）在开展广告宣传等活动中，中方如有需要可以使用投资人的广告标识。但投资人既不参与中方的盈亏，也不对此承担责任。
第五条 质量控制
（1）在上海制造产品的质量必须按照投资人的质量控制标准进行鉴定。
（2）上海制造产品的质量检验，在开始阶段应由双方工程是由联合进行，其细节详见附件四。
（3）上海制造产品的质量检验必要时应进行两次。如果第二次检验未能达到规格指标而且原因又是在投资人方面，则投资人应自费解决存在的问题。
（4）如果品质检验合格，双方工程是由应签署品质检验证明书一式两份，每方各执一份。
第六条 设备交货
（1）中方应向投资人购买生产产品所需的设备。
（2）生产产品所需设备的品名、规格详见附件五。
（3）中方投资人购买设备的价格细节由双方商定，并另签设备购买合同。
共4页，当前第1页1234
篇2：技术转让和设备、材料进口合同_合同范本
技术转让和设备、材料进口合同
中国_________产品进出口公司和_________产品生产厂（以下简称中方）与_________国_________公司（以下简投资人）和_________国_________有限公司（以下简称第三方）签订本合同，其条款如下：
第一条 技术转让
（1）中方为在_________生产投资人的甲型和乙型产品而引进必需的技术。这些产品以下简称为产品。
（2）投资人应中方要求按本合同提供其拥有的制造产品所需的技术和资料。
（3）产品的名称规格详见附件一。
（4）投资人应向中方提供制造产品所需的贸易秘密、制造技术和专有技术方面的资料。
（5）投资人向中方提供的资料详见附件二。
第二条 设备规划
（1）中方必须按照投资人的建议准备产品生产设施。
（2）为了帮助在_________准备生产设施，投资人应提供援助，包括供应下列资料：
a.生产线计划。
b.生产劳动力安排计划。
c.设备布局计划。
d.基础设施计划，如水电供应、空调、运输、通讯等。
e.设备安装操作计划。
f.生产管理计划。
g.推销计划。
上述资料应于本合同生效后_________天内由投资人提供中方。
（3）生产线必须按照附于本合同的生产细目表，即附件三。
（4）中方应自行准备生产计划，但必要时可要求投资人给予合作。
第三条 许可费的支付
（1）投资人向中方转让技术的许可费如下：
a.中方向投资人购买产品生产权应交入门费_________元。
b.每件出售的产品应向投资人交付售价_________%的提成费。
（2）一切付款应按照本合同及本条款的有关约定事项办理。
（3）一切付款应通过中国银行办理。
（4）支付方式采用不可撤销的即期信用证，用美元支付。
（5）中方应在本合同生效后_________天内，开立不可撤销的信用证向投资人支付入门费。
（6）投资人应在收到上述信用证后_________天内提供合同规定的一切技术资料。
（7）中方每次向投资人订购合同规定的材料时，应在信用证的金额中加上_________%的提成费；也可在支付货款时，为提成费另开一份信用证。
（8）中方负责在中国发生的一切费用；投资人负责在国外发生的一切费用。
第四条 销售
（1）投资人应帮助中方兴趣办展销会、研讨会、广告宣传等，以推销中方生产的产品。但费用应由中方负担。
（2）在开展广告宣传等活动中，中方如有需要可以使用投资人的广告标识。但投资人既不参与中方的盈亏，也不对此承担责任。
第五条 质量控制
（1）在_________制造产品的质量必须按照投资人的质量控制标准进行鉴定。
（2）_________制造产品的质量检验，在开始阶段应由双方工程是由联合进行，其细节详见附件四。
（3）_________制造产品的质量检验必要时应进行两次。如果第二次检验未能达到规格指标而且原因又是在投资人方面，则投资人应自费解决存在的问题。
（4）如果品质检验合格，双方工程是由应签署品质检验证明书一式_________份，每方各执_________份。
第六条 设备交货
（1）中方应向投资人购买生产产品所需的设备。
（2）生产产品所需设备的品名、规格详见附件五。
（3）中方投资人购买设备的价格细节由双方商定，并另签设备购买合同。
（4）投资人运交的设备应该是新型的、未用过的。
（5）投资人向中方运交设备的价款应以不可撤销的即期信用证按cif中国口岸条件用美元支付。
（6）投资人应按本合同的交货计划表运交设备。
（7）投资人应按合同的规定，向中方提供与设备有关的技术资料。
（8）设备正式交货日期为提单的日期。投资人应将提单号码、装船日期、装箱单、抵达日期等及时通知中方。同时，投资人还应将上述资料单据副本寄给中方。
（9）合同规定的设备和技术资料如有遗失，中方得要求投资人补交。
（10）投资人运交设备应使用坚固的包装，能以经受长途运输。
（11）投资人的装箱单应写明：
a.合同号码；b.收货人姓名；c.目的港；d.装船唛头；e.重量；f.箱号；g.收货人标记。
（12）投资人应将装货内容清单的副本放入包装内。
第七条 接收设备
（1）中方应准备设施和场地以接收和保管投资人运来的设备。
（2）投资人应在中方提出对运到的设备进行安装和试车的要求后三周内派出工程师。中方应为此事向投资人提供翻译之类的必要帮助。
（3）投资人的工程师应为安装试车任务停留两周。
（4）运交设备的验收工作，应由双方工程师和中国检验官员一起进行，详细规则见附件六。
（5）如果初次检验不合格，应进行第二次检验。如果第二次检验仍不合格，则投资人应在_________个月内自费调换有关设备。但是中方应该认识和接受这一点，即换货所需的时间长短要看所换的设备而定。
（6）如果检验合格，双方应签署检验证明书一式_________份，每方各执_________份。
（7）投资人派行往中方安装调试的工程师的居留费用均由投资人负担。
第八条 设备操作和保养的培训
（1）投资人在派遣工程到中方安装调试设备时，应兴举办关于设备操作和保养的培训。中方应为此事对投资人提供诸如翻译之类的帮助。
（2）培训的时间，包括前款所讲的安装调试在内不得超过_________天。
（3）培训主要用英文进行，也用_________作为辅助语言。中方如有需要应自费准备汉英翻译员。
（4）在中方进行设备操作保养培训的工程师的居留费用均由投资人负担。
第九条 对运交设备的保证
（1）按照国际习惯标准，运交设备的保证期为8个月，从中方完成验收工作起算。
（2）如果在保证期内发现运交的设备有缺点，投资人必须按中方的要求，及时适当解决。
（3）在上述情况下，该缺点经鉴定是由中方操作经验不足、搬运不当或某一物品的消耗所致，则投资人应要求中方支付实际运输费用。
（4）投资人应向中方提供与运交设备有关的最大限度的服务。
（5）保证期以后的设备保养需要向中方收取费用。但投资人应努力提供最大的合作和收取最低的费用。
第十条 物资的采购
（1）中方应按本合同的规定向投资人采购生产产品所需的材料。
（2）投资人应按本合同的规定向中方运交所需的材料。
（3）投资人应力求以尽可能低的价格供应这些材料。
（4）中方采购材料的实际详细品名，另以购买合同规定。
（5）投资人应该供应最新的材料，并保证质量。
（6）中方应提前_________个月向投资人送交月度生产计划和月度材料采购数量，以便材料的交货能以得到保证。
（7）投资人应尽力按照交货计划运交中方采购的材料；但是，中方应当理解和接受这样的事实，即由于市场供求不平衡等不能预见和不可避免的原因会使投资人无法按计划交货。
（8）中方对投资人运交材料的付款，必须采用不可撤销的信用证，以美元支付。
第十一条 材料的出口方法
（1）材料正式交货日期为提单的日期。投资人应将提单号码、装船日期、装箱单、抵达日期等及时通知中方。同时，投资人还应将上述资料单据副本寄给中方。
（2）投资人运交中方的材料如有任何遗失或缺点，应由投资人自费办妥。
（3）投资人运交材料应使用坚固的包装，能以经受长途运输。
（4）投资人的装箱单应写明：
a.合同号；b.收货人姓名；c.目的港；d.装船唛头；e.重量；f.箱号；g.收货人标记。
（5）投资人应将装货内容清单的副本放入包装内。
第十二条 接收材料
（1）中方应准备设施和场地以接收和保管投资人运交的材料。
（2）投资人应在材料经过品质检验之后发运。
（3）中方必须对运交的材料验收，如有缺陷或遗失，应及时通知投资人。如果投资人承认通知合理，应自费换货。但是，中方应当认识和接受这一点，即换货需要一段合理的时间。
（4）在上述情况下，该缺点经鉴定是由于中方的错误操作所致，投资人应要求中方支付一切实际费用。
（5）如果运交材料的坏遗失是由于存放或搬运不当所致，投资人应在收到中方通知后及时换货；但是，有关费用应由中方负担。
第十三条 培训中方的工程师
（1）投资人应接待_________名中方工程师，并提供_________个月的技术培训。
（2）投资人对中方工程师为此在_________国居留期间供给膳宿，但中_________之间的来回旅费除外。
（3）派出受训的中方工程师应懂得实用的英语，具有电子工程学的基础知识。
（4）教学主要用英语进行，但以_________为辅助语言。投资人应按中方要求准备一名汉英译员，费用由中方负担。
（5）投资人应立即编写教育计划并提前通知中方。有关技术教育计划项目详见附件七。
（6）第三方应同时派遣一名工程师去照料上述培训事宜。
第十四条 派遣投资人的工程师
（1）投资人应两次派遣多名工程师去中方，第一次派_________名去_________个月，以实施这项转让计划。第二次派_________名去_________个月，以达到产品生产指标。
（2）投资人派往中方的工程师主要用英语进行工作，但也以汉语为辅助语方。中方必要时应自费准备一名汉英翻译员。
（3）中方应负担投资人的工程师为此而在中国国内居留和旅行的各种费用，但中德之间的旅费除外。
（4）在投资人派遣工程师的任务完成以后，中方如有必要仍可要求投资人继续给予技术支持。但投资人应要求中方为这样增加的合作支付费用。合作的条款由双方将来讨论约定。
（5）中方要求投资人技术服务的细节，见附件八。
第十五条 将来的技术合作
（1）投资人应为将来的发展与中方进行合作，包括高分辩能力显示等在内。
（2）上述技术合的条款，包括它的费用，应由中方、投资人、第三方三方面商定并另签合同。
第十六条 第三方的作用
（1）第三方负责中方和投资人之间的信息传递、交往媒介等，并对中方提供必要的援助。
（2）第三方应为此适当向中方收取报酬。
第十七条 第三方的责任
（1）第三方应作为中方与投资人之间的桥梁。
（2）第三方应协助中方用展销会、研讨会、技术培训等办法在中国销售产品。
（3）第三方应在产品品质合格时考虑把这些产品销往欧洲和非洲（南非除外）。
（4）第三方应在中方派遣工程师到欧洲进行产品开发时，向他们提供免费使用的设施和工具。但中方应负担他们在欧洲的一切费用。
第十八条 仲裁
（1）中方和投资人应以合作的态度解决合同争端。如解决不成，则以仲裁方式最终解决。
（2）仲裁应在_________进行。
（3）中方和投资人都应受最终裁决的约束。
（4）仲裁费由败诉方负担。
（5）本合同如有某些问题仍在仲裁之中应该分开予以执行。
第十九条 税款
在合同有效期间，中国的税款由中方负责；欧洲的税款由投资人和第三方负责。
第二十条 合同的生效
（1）不可预见的问题不应影响本合同的执行。
（2）中方、投资人、第三方三方应向各自的政府申请允许有关商品的进口和出口。最后一方获知得批准之日即为本合同生效之日。三方应尽最大努力争取在_________天内取得批准。
第二十一条 合同的撤销
（1）如果在合同生效后_________个月没有见到效果，三方保留撤销本合同的权利。
（2）本合同从生效之日起有效_________年，期满后可以延长_________年。
第二十二条 使用的文字
本合同用中文和英文写成，两种文本具有同等效力。
第二十三条 合同附件
（1）如要修改合同，有关三方面应同意签订正式修改文件成为本合同的一部分。
（2）所有附件均属有效，并应成为本合同的一部分。
中方（盖章）：_________ 投资人（盖章）：_________
代表人（签字）：_________ 代表人（签字）：_________
_________年____月____日 _________年____月____日
第三方（盖章）：_________
代表人（签字）：_________
_________年____月____日
篇3：技术进口企业经营合同
技术进口企业经营合同
甲方：______ 乙方：______
中国技术进口总公司和__________国__________公司根据《中华人民共和国中外合资经营企业法》和中国的其它有关法规，本着平等互利的原则，通过友好协商同意在中华人民共和国__________省__________市共同投资，联合经营__________公司。
第一章合营公司的组成
1.1合营各方为：
中国技术进口总公司(以下简称甲方)在中国__________注册登记，其法定地址在中国__________省_______市________街______号;法定代表：姓名__________职务__________国籍__________。
__________国__________公司(以下简称乙方)在__________国__________地登记注册，其法定地址在__________国__________地;法定代表：姓名__________职务__________国籍__________。(如合营为多方者，可称丙，丁....方)
1.2合营公司的中文名称为：____________________外文名称为：____________________
合营公司的法定地址在合营公司根据业务需要，经有关当局批准后，可在国外或其它地方设立分支机构或办事处。
1.3合营公司是在中国境内设立的合资经营有限公司，是中国的法人、公司的一切经营活动必须遵守中国的法律，法令和条例的规定。
第二章营业范围与服务内容
2.1营业范围：
合营公司将承担下列各类项目的工程承包或咨询服务：
煤矿，冶金，石油，交通运输，水力发电，火力发电，核电站，水利，通讯，及上述各类项目的附属项目等。
2.2服务内容：
合营公司在其营业范围内，将为客户提供下列各类服务：
2.2.1工矿企业工程项目的新建，改建，扩建和技术改造，发展规划设计。
2.2.2初步可行性分析
2.2.3可行性研究
2.2.4项目评价
2.2.5选择土建施工部门
2.2.6土建工程的施工监督
2.2.7培训技术人员，管理人员
2.2.8技术转让
2.2.9董事会批准的其它服务项目
(注：可根据具体情况订立)
2.3合营公司将根据上述服务范围，类别及公司营业计划，寻求承担中国国内或国外项目。
第三章投资总额及资本转让
3.1合营公司的注册资本为__________元(人民币或双方商定的一种外币)
其中甲方出资__________元。占注册资本__________%
乙方出资__________元。占注册资本__________%
3.2甲乙双方将以下列方式作为出资
甲方：现金__________元，专有技术使用费__________元。共__________元。
乙方：现金__________元。机械设备__________元。专有技术使用费__________元，其他__________元。共__________元。
3.3合营各方在合营公司获得营业执照后__________天内，分期缴足投资资金，其应付金额和期限规定如下：....
任何一方对其出资额逾期缴付或欠缴按14.3条办理。
3.4.1注册资本的增加转让或以其它方式处置，均经董事会通过。并报原审批机关办理登记手续。
3.4.2合营一方向第三者转让全部或部分出资额，需经公司他方同意，公司他方有权优先购买其转让的股份，公司一方向第三者转让出资额的条件.不得比向公司他方转让出资额的条件优惠。
第四章利润分配和亏损负担
4.1合营公司利润在按中国税法纳税完了以后，由董事会决定扣除公司的储备基金，企业基金和职工福利基金后，合营各方按出资比例分享利润或分担亏损或风险。
4.2合营公司的资产负债，仅以公司注册资本为限。
第五章合营期限，终止合同及财产清算
5.1合营公司在领取营业执照后，即可以法人身份开始营业，合营期限为__________年，合营期满合营合同自行终止。
5.2如合营各方一致同意，延长合营期限，应在合营公司期满前6个月，向有关机构提出延长合营期限
的申请，每次延长以_____年为限。
5.3合营公司期限届满或提前解散时，董事会应指定一个清算委员会，清算委员会可包括或由全体董事组成，并按照中国的有关财务会制度订立公司清算计划。妥善进行清算，合营公司的全部财产资金用于偿还公司债务，履行赔偿义务支付清算费用后，所余全部财产均应依双在注册资本中所占的投资比例进行分配。
第六章合营各方的义务
6.1甲方责任：
6.1.1按照3.3条的规定，按时提供应分摊的资本。
6.1.2协助合营公司在中国注册并取得营业执照。
6.1.3按照合营公司的营业计划.为合营公司提供国内外工程项目。
6.1.4协助合营公司在当地招收有经验的和合格的经营管理人员，工程技术人员及工人。
6.1.5协助合营公司的外籍工作人员办理入境签证，工作许可证等手续。
6.1.6负责办理合营公司委托的其它事宜。
6.2乙方责任
6.2.1按照3.3条的规定提供应分摊的资本。
6.2.2按照11.1条及附件的规定，提供适用及先进的技术.乙方应尽最大努力取得所需要的出口许可证(详见附件)。
6.2.3按照合同规定.向合营公司提供有经验的合格的技术人员及高级管理人员。
协助合营公司聘请国外有关高级工程技术及管理人员。
6.2.4培训合营公司的技术人员，管理人员及其他工作人员。
6.2.5按照合营公司的营业计划，寻找国外有关工程项目。
6.2.6办理合营公司委托的其它事宜。
6.3免责范围：
合营各方除按合同规定享受权利，承担义务外，对于因合营公司的行为引起或与合营公司行为有关的任何间接或直接发生的损失或损害，双方均不向对方负责。
第七章董事会
7.1合营公司设立董事会。董事会为合营公司的最高权力机构。董事会由______名董事组成。其中甲方______名;乙方______名;董事长由甲方委派;设副董事长__________名.由__________方委派。
7.2董事长，副董事长及董事的任期为四年，任期期满后，如获继续委派可以连任。
任何一方可以随时更换自己委派的董事长，副董事长或董事，但必须书面通知合营的另一方。
7.3董事会的职权，决议程序及董事会的召开均按合营章程的规定执行。
第八章经营管理机构
8.1合营公司实行董事会领导下的总经理负责制，设总经理一名由________方推荐，副总经理_______名。由甲方推荐________名，乙方推荐__________名。正副总经理任期为__________年。
8.2总经理的职责是负责执行董事会的决议，组织和领导合营公司的经营管理工作，副总经理根据合营章程的.规定，协助总经理工作。合营公司将根据本公司的业务需要下设部门经理。负责部门业务的日常工作。并对总经理和副总经理负责。
8.3正副总经理由合营公司董事会任命和免职。正副总经理不得兼任其它公司和企业的总经理和副总经理的职务。各部门经理由总经理任命。
第九章财务会计制度
9.1合营公司的财务会计制度应根据中华人民共和国有关法律和财会规定。结合本公司的实际情况加以制定。合营公司注册登记后，应及时到当地财务部门和税务机关备案。
合营公司在中国银行开立人民币和外汇帐户，也可以在经批准和指定的国外其它银行开立帐户。
9.2合营公司的财务会计制度，应采用日历年制，自公历每年一月一日起至十二月三十一日止，为一个会计年度，公司会计采用国际通用的权责发生制和借贷记帐法记帐。一切记帐凭证，单据，报表，帐簿必须用中文书写，(也可以同时用甲乙双方同一种外国文字书写)。
9.3合营公司设总会计师，副总会计师各一名，总会计师的职权和责任按合营公司章程的规定执行，总会计师由_____方推荐。副总会计师由______方推荐，总会计师副总会计师均由董事会任命，
第十章劳动管理
10.1合营公司职工的雇佣，辞退，工资，福利，劳动保护，劳动保险及劳动纪律等事宜，均按《中华人民共和国中外合资经营企业劳动管理规定》和董事会与合营公司工会签订的劳动合同办理，劳动合同订立后.即报当地劳动管理部门备案。
10.2甲乙双方推荐及聘用的高级管理人员，高级工程技术人员的工资及福利待遇等问题由董事会讨论决定。
第十一章技术和服务的提供
11.1合营双方长期合作的一个重要目的，是由双方向合营公司提供先进和适用的技术和优质服务，推动合营公司业务，使其在国内获得卓越显著的经济效益，在国际市场上获得较强的竞争能力，技术和服务的提供将与公司从事的项目相结合，并支持项目的实施，公司还将根据具体情况制订培训计划，使其公司有关职员能成功地运用这些先进技术.技术和服务的提供方式，具体内容，费用标准等详见附件_____。
11.2合营公司与合营双方
签订的有关技术或服务协议，其期限为__________年，协议期满后.合营公司仍有权使用这些技术。
第十二章纳税
12.1合营公司按照中华人民共和国有关税法规定交纳各种税金。
12.2合营公司的职工按照《中华人民共和国个人所得税法》交纳各种税金。
第十三章保险
13.1合营公司的各项保险均向中国人民保险公司投保，由公司经理向董事会提出公司的保险计划，经董事会讨论决定后，以合营公司的名义办理投保手续。
第十四章违约责任
14.1合营一方因不履行合同或履行合同义务不符合约定条件，造成合营另一方损失时，受损失一方有权要求赔偿损失或采取其它补救措施.补救措施采取后尚不能完全弥补另一方所遭到的损失的，另一方仍有权要求赔偿损失。
14.2合营一方因违反合同而承担的赔偿责任，应相当于另一方因此而遭到的损失，并支付一定数额的违约金，其违约金的计算方法如下....
14.3合营一方未按期支付合同规定的应付金额，合营公司有权收取迟延支付金额的利息.从逾期第一个月起。
上述逾期的利息以各自出资的货币支付。
第十五章不可抗力
15.1合营双方因不可抗力事件(地震，台风，水灾，火灾，战争及其它不能预见并对其发生和后果不能防止或避免的不可抗力事故)以致造成受事件直接影响的一方迟延履行或无法履行本合同，在符合下列全部规定的情况下不作为违约处理。
15.1.1不可抗力事件是阻止、阻碍、迟延受事件影响一方履行合同的直接原因。
15.1.2受事件影响的一方在该事件发生的情况下，已经采取了所有能够实施的合理措施。
15.1.3受事件影响的一方。在遭受事件时，已立即通知合营他方。并在十五天以内，以书面形式提供事故情况，及处理结果和迟延履行或无法履行本合同的理由.并由该事故发生地的合法公证机关出具证明。
15.2一旦事件影响已克服或处理结束.受事件影响的一方必须立即通知合营他方。
第十六章争议的解决
16.1合同发生争议时，合营各方应尽可能通过协商或第三者调解解决，当事人不愿协商解决的，可以提交中国仲裁机构或双方同意的其它仲裁机构仲裁。在中国仲裁应遵守中国仲裁机构的仲裁程序，在其它机构仲裁应遵守该机构的仲裁程序。
16.2仲裁裁决是终局裁决，对双方都有约束力。
仲裁费用由败诉方负担或由仲裁裁定。
第十七章适用法律
17.1本合同的订立，效力，解释，履行和争议的解决均受中华人民共和国法律管辖。
第十八章合同的变更与解除
18.1经合营各方协商同意后，可以变更或修改合同，合营各方必须就此签订书面协议方能有效。
合营任何一方未征得合营他方的书面同意，不能将本合同章程和合同附件规定的权利和义务转让给第三者，违反上述规定以任何方式转让的合同均属无效。
前两款所述变更情况，按中国法律或行政规定，应由国家批准成立的合营合同，应经原审批机关批准方能有效。
18.2有下列情形之一的，合营一方有权通知他方解除合同。
18.2.1企业发生严重亏损，无力继续经营;
18.2.2另一方违反合同，以致严重影响订立合同时所期望的经济效益。
18.2.3另一方在约定期限内没有履行合同，在被允许迟延履行的合理期限内仍未履行合同。
18.2.4发生不可抗力事件.致使合同的全部义务不能履行;
18.2.5合同约定的解除合同的条件已经出现。
18.3有下列情况之一的合同即告解除。
18.3.1仲裁机构裁决或法院判决终止合同;
18.3.2双方商定同意解除合同.
18.4在合营合同解除时，双方有义务完成合营公司正在进行的项目。
第十九章合同生效及其它
19.1按本合同原则订立的如下附件，包括章程，协议，附件等均为本合同的组成部分.本合同条款与附件条款发生矛盾时，应以本合同条款为准。
19.2本合同经双方法定代表签字后，须经__________批准方能生效。
19.3本合同于__________年_______月_______日由甲、乙双方的授权代表在地签字。
代表签字：________________甲方见证人：(签字)______________ 年______月_____日
代表签字：________________乙方见证人：(签字)______________ 年______月_____日
篇4：技术进出口合同范本_合同范本
技术进出口合同范本
技术进出口合同范本
根据《中华人民共和国技术进出口管理条例》，现公布修订后的《技术进出口合同登记管理办法》，自公布之日起30日后施行，
技术进出口合同登记管理办法》(原对外贸易经济合作部XX年第17号令)同时废止。
部 长
二〇xx年x月x日
技术进出口合同登记管理办法
第一条 为规范自由进出术的管理，建立技术进出口信息管理制度，促进我国技术进出口的发展，根据《中华人民共和国技术进出口管理条例》，特制定本办法。
第二条 技术进出口合同包括专利权转让合同、专利申请权转让合同、专利实施许可合同、技术秘密许可合同、技术服务合同和含有技术进出口的其他合同。
第三条 商务主管部门是技术进出口合同的登记管理部门。
自由进出技术合同自依法成立时生效。
第四条 商务部负责对《政府核准的投资项目目录》和政府投资项目中由国务院或国务院投资主管部门核准或审批的项目项下的技术进口合同进行登记管理。
第五条 各省、自治区、直辖市和计划单列市商务主管部门负责对本办法第四条以外的自由进出技术合同进行登记管理。中央管理企业的自由进出技术合同，按属地原则到各省、自治区、直辖市和计划单列市商务主管部门办理登记。各省、自治区、直辖市和计划单列市商务主管部门可授权下一级商务主管部门对自由进出技术合同进行登记管理。
第六条 技术进出口经营者应在合同生效后60天内办理合同登记手续，支付方式为提成的合同除外。
第七条 支付方式为提成的合同，技术进出口经营者应在首次提成基准金额形成后60天内，履行合同登记手续，并在以后每次提成基准金额形成后，办理合同变更手续。技术进出口经营者在办理登记和变更手续时，应提供提成基准金额的相关证明文件。
第八条 国家对自由进出技术合同实行网上在线登记管理。技术进出口经营者应登陆商务部政府网站上的“技术进出口合同信息管理系统”进行合同登记，并持技术进(出)口合同登记申请书、技术进(出)口合同副本(包括中文译本)和签约双方法律地位的证明文件，到商务主管部门履行登记手续。商务主管部门在收到上述文件起3个工作日内，对合同登记内容进行核对，并向技术进出口经营者颁发《技术进口合同登记证》或《技术出口合同登记证》。
第九条 对申请文件不符合《中华人民共和国技术进出口管理条例》第十八条、第四十条规定要求或登记记录与合同内容不一致的，商务主管部门应当在收到申请文件的3个工作日内通知技术进出口经营者补正、修改，并在收到补正的申请文件起3个工作日内，对合同登记的内容进行核对，颁发《技术进口合同登记证》或《技术出口合同登记证》。
第十条 自由进出技术合同登记的主要内容为：
(一)合同号
(二)合同名称
(三)技术供方
(四)技术受方
(五)技术使用方
(六)合同概况
(七)合同金额
(八)支付方式
(九)合同有效期
第十一条 国家对自由进出技术合同号实行标准代码管理。技术进出口经营者编制技术进出口合同号应符合下述规则：
(一)合同号总长度为17位。
(二)前9位为固定号：第1—2位表示制合同的年份(年代后2位)、第3—4位表示进口或出口国别地区(国标2位代码)、第5—6位表示进出口企业所在地区(国标2位代码)、第7位表示技术进出口合同标识(进口y，出口e)、第8—9位表示进出技术的行业分类(国标2位代码)。后8位为企业自定义。例：01usbje01tic001。
第十二条 已登记的自由进出术合同若变更本办法第十条规定合同登记内容的，技术进出口经营者应当办理合同登记变更手续。
办理合同变更手续时，技术进出口经营者应登录“技术进出口合同信息管理系统”，填写合同数据变更记录表，持合同变更协议和合同数据变更记录表，到商务主管部门办理手续。商务主管部门自收到完备的变更申请材料之日起3日内办理合同变更手续。
按本办法第七条办理变更手续的，应持变更申请和合同数据变更记录表办理。
第十三条 经登记的自由进出技术合同在执行过程中因故中止或解除，技术进出口经营者应当持技术进出口合同登记证等材料及时向商务主管部门备案。
第十四条 技术进出口合同登记证遗失，进出口经营者应公开挂失。凭挂失证明、补办申请和相关部门证明到商务主管部门办理补发手续。
第十五条 各级商务主管部门应加强对技术进出口合同登记管理部门和人员的管理，建立健全合同登记岗位责任制，加强业务培训和考核。
第十六条 中外合资、中外合作和外资企业成立时作为资本入股并作为合资章程附件的技术进口合同按外商投资企业有关法律规定办理相关手续。
第十七条 商务部负责对全国技术进出口情况进行统计并定期发布统计数据。各级商务主管部门负责对本行政区域内的技术进出口情况进行统计。
第十八条 本办法自公布之日起30日后施行。XX年1月1日起施行的《技术进出口合同登记管理办法》(对外贸易经济合作部XX年第17号令)同时废止。
篇5：技术转让和设备、材料进口合同
一、合同名称：
二、签约时间与地点
本许可证合同于 年 月 日在中国 签订。
三、合同当事人及法定地址
公司(以下简称受方)为一方， 公司(以下简称供方)为另一方，同意就下列条款签订本合同(以下称本合同)。
(双方法定地址以及电报、电传号)
四、鉴于条款 鉴于供方拥有设计、制造、安装 产品的专有技术，供方是该项技术的合法所有者，愿将该技术转让给受方。
五、合同所涉及的关键名词的定义
本合同所用下述用语的定义是：
专有技术 系指为制造 产品所需的，为供方所掌握的一切知识、经验和技能，包括技术资料和不能形成文字的各种经验和技能。
技术资料系指上述专有技术的全部文字资料(或扼要指明资料的范围)。
合同产品系指受方根据本合同使用供方所转让的专有技术制造和销售的产品。
净销售价系指销售合同产品的发票金额扣除产品税、交易折扣以及因退货、拒收所引起的退款剩余的价款。
合同期限系指本合同生效日起算至第十年为止的期限。
六、合同范围与内容
1.供方同意受方在中国设计、制造、使用和销售合同产品的专用技术(或专利技术)。
在该地区受方享有利用该技术独占性制造产品和销售产品的权利(或这是一项非独占的许可证)。
2.供方负责向受方提供 技术的研究报告、设计、计算、产品图纸、制造工艺、质量控制、试验、安装、调试、运行、维修等一切技术数据、资料(详见附件×)和经验，以便受方能实施制造产品(产品的型号、规格、技术参数详见附件×)。
3.供方负责自费派遣技术人员赴受方进行技术指导和参加 的性能考核(详见附件×)。
4.供方负责接受受方有关人员自费赴供方进行培训，使受方人员能掌握合同规定的上述技术(详见附件×)。
5.在合同有效期限内，受方在合同产品上有权使用属于供方所有的 商标(或牌号)。
6.供方有责任(或同意)以最优惠的价格向受方提供为制造合同产品所必需的设备、测试仪器、原材料及零部件(或供方有责任帮助受方为实施制造合同产品所需的配套件，从第三方取得有关技术许可证，或者与第三方进行合作生产)。
七、价格或许可证使用费
1.根据本合同规定，供方向受方提供的技术和技术服务等，受方应向供方支付的合同总价为 万美元，其中：技术使用费 元;资料费 元;技术服务费 元。上述价格为固定价格。
2.受方有义务对根据许可证转让的技术支付下列费用;
(1)入门费 美元。
(2)受方在合同有效期内应向供方支付常年提成费，其提成率为合同产品净销售价的3%。
八、技术资料的交付
1.供方应按本合同附件 的规定向受方提供技术资料。
2.供方用空运把技术资料送达中国 机场。
该机场在收到技术资料而在空运提单上加盖的印戳日期为技术资料的实际交付日期。
受方将带有到达印戳日期的空运提单影印本一份寄送供方。
3.在技术资料发运后的24小时(或48小时)内，供方应将合同号、空运提单号与日期、资料项号、件数、重量、航班号用电报或电传通知受方，并将空运提单正本一份、副本两份和技术资料装箱清单三份航空邮寄给受方。
4.如受方收到技术资料后发现不符本合同附件×的规定，包括在空运中丢失或损坏，应在30天内通知供方，说明所缺或损坏的资料，供方应在收到通知后立即(或30天内)免费补寄或重寄给受方。
如果受方在收到技术资料后60天内没有提出资料不足或损坏的书面通知，即视为受方对技术资料验收。
5.技术资料使用文字为英文(或其它文字)，计量单位为米制，技术资料所适用的标准为 工业标准。
6.技术资料的包装要适应长途运输与搬运、防雨、防潮，每箱上应以英文标明下述内容：合同号(许可证合同编号LIS85001)、收货人(中国技术进出口公司 分公司)，目的地(中国 市机场)、毛重( 公斤)、箱号(或件号)以及运输标志等。
九、交换改进技术及对技术资料的修改
1.供方在合同有效期内改进和发展的技术资料，应免费提供受方。
受方改进和发展的技术也应按对等原则提供给供方，但改进和发展的技术所有权属于受方，对方不得去申请专利或转让给第三方。
双方交换技术资料，均不附加任何限制。
2.供方提供的技术资料，如有不适合于受方生产条件的，供方有责任协助受方修改技术资料，并加以确认。
十、性能考核和验收
1.在合同产品首批生产后，由双方根据本合同附件×的规定，共同进行产品性能考核。
2.经考核合同产品的性能符合本合同技术文件规定的技术指标，即通过验收，双方签署合同产品性能考核合格证明书一式四份。
每方各执二份。
3.如经考核，合同产品性能不符本合同技术文件规定的技术指标时，双方应共同研究，分析原因，澄清责任。
如责任在供方，供方应自负费用，采取措施，消除缺陷，缺陷消除后进行第二次考核。
如第二次考核后仍不合格，供方应继续采取措施，消除缺陷，并进行第三次试验。
如第三次考核有不合格时，受方有权终止本合同。
如果考核不合格责任在于受方，受方在供方协助下，采取措施，消除缺陷，并进行第二次或第三次试验。
如第三次考核仍不合格时，则由双方协商如何再执行合同的问题。
供方协助受方消除缺陷派遣技术人员的交通和食宿费用由受方负担。
十一、保证与索赔
1.供方保证按本合同附件×的规定提供给受方的技术资料是供方掌握的最新资料，并保证向受方及时提供任何发展和改进的技术资料。
2.供方保证所提供的资料是正确的、完整的、清晰的和可靠的，与供方生产使用的技术资料完全一样。
3.供方应按本合同规定日期交付技术资料，如果未按时交付资料，按下述比例向受方支付罚款。
(1)拖延一至四周，每周为本合同总价格(或技术使用费)的0.5%;
(2)拖延五至八周，为本合同总价格(或技术使用费)的1%;
(3)拖延八周以上，为本合同总价格(或技术使用费)的1.5%。
4.供方向受方支付罚款并不解除供方继续交付技术资料的义务。
5.如果供方迟交技术资料超过六个月，受方有权终止本合同，此时供方应将受方已支付的金额，并按年利 %的利息，一并退还给受方。
6.如果合同产品考核验收三次仍不合格时，受方除有权终止本合同外，受方还有权收回已付给供方的全部金额，并加年利 %的利息。
如果产品只有部分性能指标达不到合同的规定时，受方减少支付合同总价的 %。
7.供方保证合同转让中的一切权利，包括制造、使用、销售以及其它有关技术的合法性，并保证不受第三方的指控。
如发生第三方指控侵权，供方应负责与第三方交涉，并承担法律上和经济上的一切责任。
十二、税收
1.凡因执行本合同有关的一切税款，在受方国内的由受方负担。
在受方以外的则均由供方负担。
2.供方因履行本合同而在中国境内取得的许可证使用费的收入，必须按中国税法(或按 国与 国的税收协定)纳税。
十三、仲裁
1.因执行本合同所发生的或与本合同有关的一切争议，应通过双方友好协商解决。
如协商仍不能解决时，应提交仲裁解决。
2.仲裁地点在瑞典的斯德哥尔摩，由斯德哥尔摩商会仲裁院根据该院的仲裁规则进行仲裁(或仲裁在被诉方的国家进行。
如在中国由中国国际经济贸易仲裁委员会按该会仲裁程序暂行规则进行仲裁。
如在 国则由 仲裁协会按该会的仲裁规则进行仲裁)。
3.仲裁裁决是终局的，对双方均有约束力。
4.仲裁费用，除仲裁另有规定外，由败诉方负担。
5.在仲裁过程中，除进行仲裁的部分外，本合同的其它部分应继续执行。
十四、不可抗力
1.本合同的任何一方，由于战争、严重水灾、水灾、台风以及地震等不可抗力的事故，致使本合同不能执行时，可延迟履行本合同，延迟的期限相当于事故影响的期限。
2.发生不可抗力事故后，受不可抗力影响的一方，应在十五天内以航空挂号信将有关当局出具的证明文件提交给另一方确认。
3.如不可抗力事故持续一百二十天以上，双方应通过友好协商解决继续执行本合同的问题。
十五、合同的生效、期限、终止及其它
1.本合同由双方代表于 年 月 日在 市签字。
签字后由各方分别向本国政府有关当局申请批准，争取在六十天内获得批准，以最后批准的日期为合同生效日期。
如签字后六个月仍得不到批准，双方有权撤销本合同。
2.本合同从生效日起 年内有效，有效期满后合同自动失效。
如合同期满前三个月内，经一方提出，另一方同意后可延长 年。
3.本合同期满时，债务人对债权人未了债务应继续予以支付。
4.本合同条款的任何修改、补充，须经双方协商同意后授权代表签署书面文件，作为本合同的组成部分。
5.本合同附件一至附件 ，为本合同的组成部分，与合同正文具有同等效力。
6.本合同用中文和 文两种文字写成，正本四份，具有同等效力，双方各执一式两份。
受方：
代表 (签字)：
供方：
代表 (签字)：
年 月 日
篇6：技术转让和设备、材料进口合同_合同范本
技术转让和设备、材料进口合同
中国产品进出口公司和上海产品生产厂（以下简称中方）与英国广播有限公司（以下简投资人）和德国贸易有限公司（以下简称apl）签订本合同，其条款如下：
第一条 技术转让
（1）中方为在上海生产投资人的甲型和乙型产品而引进必需的技术。这些产品以下简称为产品。
（2）投资人应中方要求按本合同提供其拥有的制造产品所需的技术和资料。
（3）产品的名称规格详见附件一。
（4）投资人应向中方提供制造产品所需的贸易秘密、制造技术和专有技术方面的资料。
投资人向中方提供的资料详见附件二。
第二条 设备规划
（1）中方必须按照投资人的建议准备产品生产设施。
（2）为了帮助在上海准备生产设施，投资人应提供援助，包括供应下列资料：
①生产线计划。
②生产劳动力安排计划。
③设备布局计划。
④基础设施计划，如水电供应、空调、运输、通讯等。
⑤设备安装操作计划。
⑥生产管理计划。
⑦推销计划。
上述资料应于本合同生效后60天内由投资人提供中方。
（3）生产线必须按照附于本合同的生产细目表，即附件三。
（4）中方应自行准备生产计划，但必要时可要求投资人给予合作。
第三条 许可费的支付
（1）投资人向中方转让技术的许可费如下：
①中方向投资人购买产品生产权应交入门费＿＿＿＿＿＿美元。
②每件出售的产品应向投资人交付售价3％的提成费。
（2）一切付款应按照本合同及本条款的有关约定事项办理。
（3）一切付款应通过中国银行办理。
（4）支付方式采用不可撤销的即期信用证，用美元支付。
（5）中方应在本合同生效后一个月内，开立不可撤销的信用证向投资人支付入门费。
（6）投资人应在收到上述信用证后30天内提供合同规定的一切技术资料。
（7）中方每次向投资人订购合同规定的材料时，应在信用证的金额中加上3％的提成费；也可在支付货款时，为提成费另开一份信用证。
（8）中方负责在中国发生的一切费用；投资人负责在国外发生的一切费用。
第四条 销售
（1）投资人应帮助中方兴趣办展销会、研讨会、广告宣传等，以推销中方生产的产品。但费用应由中方负担。
（2）在开展广告宣传等活动中，中方如有需要可以使用投资人的广告标识。但投资人既不参与中方的盈亏，也不对此承担责任。
第五条 质量控制
（1）在上海制造产品的质量必须按照投资人的质量控制标准进行鉴定。
（2）上海制造产品的质量检验，在开始阶段应由双方工程是由联合进行，其细节详见附件四。
（3）上海制造产品的质量检验必要时应进行两次。如果第二次检验未能达到规格指标而且原因又是在投资人方面，则投资人应自费解决存在的问题。
（4）如果品质检验合格，双方工程是由应签署品质检验证明书一式两份，每方各执一份。
第六条 设备交货
（1）中方应向投资人购买生产产品所需的设备。
（2）生产产品所需设备的品名、规格详见附件五。
（3）中方投资人购买设备的价格细节由双方商定，并另签设备购买合同。
（4）投资人运交的设备应该是新型的、未用过的。
（5）投资人向中方运交设备的价款应以不可撤销的即期信用证按cif中国口岸条件用美元支付。
共4页，当前第1页1234
篇7：技术出口合同范本_合同范本
技术出口合同范本
Contract for Equipment Sales and Technology Licensing
Contract No. ____________________
This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).
Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:
Article 1 Definitions
1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.
1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.
1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.
1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.
1.5 “Destination Airport” refers to _____________Airport.
1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.
1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.
1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.
1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.
1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.
1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.
1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.
1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.
1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.
1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.
1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.
1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.
1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.
1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.
Article 2 Scope of the Contract
2.1 The Seller’s Obligation
2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.
2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.
2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.
2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.
2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.
2.2 The Buyer’s Obligation
2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.
2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.
2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.
2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.
2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.
2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.
Article 3 Grant of License
3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.
3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.
3.4 Territory
3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.
3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.
Article 4 Price
4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.
4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).
The breakdown price is as follows:
The price for Equipment is __________(say _______________________ only).
Fee for design is __________(say _______________________ only).
Fee for Technical Documentations is __________(say _______________________ only).
License fee is __________________(Say: _________________ only)
4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).
4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.
4.2.3 The above price is fixed and firm.
4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.
4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.
Article 5 Payment
5.1 Down Payment
Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.
5.2 [Option One: Payment by Sight L/C]
The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).
5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) Bill of Lading in one (1) original and ___ ( ) copies;
(b) Commercial Invoice in one (1) original and ___ ( ) copies;
(c) Packing list in one (1) original and ___ ( ) copies;
(d) Certificate of Origin in one (1) original and ___ ( ) copies;
(e) Insurance Policy in one (1) original and ___ ( ) copies;
5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;
(b)One ( 1 ) copy of commercial invoice.
5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;
b) One (1) copy of Commercial Invoice.
5.2 [Option Two: Payment under a L/G]
The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.
5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.
Article 6 Delivery of Equipment and Technical Documentation
6.1 The Delivery of the Equipment
6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.
6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.
Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.
6.1.3 The port of shipment is ____, while the port of destination is ____.
6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.
6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.
6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:
(a) Contract number
(b) Name of the vessel and loading port
(c) Name of the Equipment shipped
(d) Number and date of Bill of Lading
(e) Total volume
(f) Total gross and net weight
(g) Total number of packages/cases
6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:
(a) Bill of Lading
(b) Commercial Invoice
(c) Packing List
(d) Certificate of Origin
(e) Insurance Policy.
6.2 The Late Delivery of the Equipment
6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:
(a) From the first week to the fourth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per
week
(b) From the fifth week to the eighth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per week
(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of
the value of the delayed portion of the Equipment per week
6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.
6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.
6.3 The Delivery of the Technical Documentation
6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.
6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.
6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.
6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.
Article 7 Packing and Marking
7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.
7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:
(a) Destination
(b) Consignee
(c) Contract number
(d) Shipping mark
(e) Gross/net weight (kg)
(f) Case/ bale number
(g) Dimensions: L x W x H (cm)
7.3 Each package shall contain one (1) copy of packing list.
7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.
7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.
(a) Destination
(b) Consignee
(c) Contract number
(d) Gross/net weight (kg)
(e) Item number
(f) Dimensions: L x W x H (cm)
Article 8 Technical Service and Technical Training
8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.
8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.
8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.
8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.
Article 9 Standards and Inspection
9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.
9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.
9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.
The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.
9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.
In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.
9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.
9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.
If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.
Article 10 Design and Design Liaison
10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.
10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.
10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.
Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance
11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.
11.2 Chief Representatives
11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.
11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.
11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.
11.3 Erection and Test Run
11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.
11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.
11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.
11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.
11.4 Commissioning and Performance Test
11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.
If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.
11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.
11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.
11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.
11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.
11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.
11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.
11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.
11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.
The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.
11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.
11.5 Acceptance
11.5.1 Acceptance shall occur in respect of the Equipment when :
(a) Performance Test has been successfully completed as per the Article 11.4.6.; or
(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or
(c) The Seller has paid the liquidated damages as per Article 11.4.9; or
(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or
(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.
11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.
11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.
11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.
11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.
Article 12 Guarantee and Warranty
12.1 The Seller guarantees that:
(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;
(b) The Technical Documentation shall be complete, clear and correct.
12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.
12.3 Defect of the Equipment
12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.
The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.
12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.
12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.
12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.
12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.
12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:
(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or
(b) Alteration, modification or repair without the Seller’s prior written consent; or
(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or
(d) Normal wear and tear.
12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.
12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.
12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.
12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.
12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.
Article 13 Intellectual Property Right
13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.
13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.
13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.
13.4 Registration of the Contract and Maintenance of Patent
13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.
13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.
13.5 Improvement and Grant-back
13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.
13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.
13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.
Article 14 Confidentiality
14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.
14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.
14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.
14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.
14.5 This Article 14 shall survive the expiration or termination of the Contract.
14.6 The confidential obligation shall not apply to the information which:
A. now or hereafter enters the public domain; or
B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or
C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.
Article 15 Taxes and Duties
15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.
15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.
15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.
15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.
Article 16 Force Majeure
16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.
16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.
16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.
Article 17 Applicable Law and Settlement of Disputes
17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.
17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.
17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.
17.4 The arbitral award shall be final and binding upon both parties.
17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.
Article 18 Effectiveness, Term and Termination of the Contract
(a) The Seller and the Buyer sign the Contract;
(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);
(c) The Seller receives the Down Payment;
(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.
18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.
18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.
18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.
(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.
(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.
(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.
18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party
A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
B. fails to perform its confidentiality obligation under the Contract; or
C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.
18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if
A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or
B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or
C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.
18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,
The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.
All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.
All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.
In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.
The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.
E. Termination of the Contract shall not release either party from its confidential obligations under the Contract
Article 19 Miscellaneous
19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).
19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.
19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.
If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.
19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.
19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.
The Buyer:
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
The Seller :
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.
The Buyer:
The Seller:
By:______________________[Signature]
Name: [printed name]
By:_______________________ [Signature]
Name: [printed name]
Title:
Title:
Appendices
Appendix 1 Specifications and Guarantee Indices (Omitted)
篇8：技术转让和设备、材料进口合同_合同范本
技术转让和设备、材料进口合同
中国_____________产品进出口公司和上海______________产品生产厂(以下简称中方)与英国_____________广播有限公司(以下简投资人)和德国_____________贸易有限公司(以下简称alp)签订本合同，其条款如下：
第一条 技术转让
(1)中方为在上海生产投资人的甲型和乙型产品而引进必需的技术。这些产品以下简称为产品。
(2)投资人应中方要求按本合同提供其拥有的制造产品所需的技术和资料。
(3)产品的名称规格详见附件一。
(4)投资人应向中方提供制造产品所需的贸易秘密、制造技术和专有技术方面的资料。
投资人向中方提供的资料详见附件二。
第二条 设备规划
(1)中方必须按照投资人的建议准备产品生产设施。
(2)为了帮助在上海准备生产设施，投资人应提供援助，包括供应下列资料：
①生产线计划。
②生产劳动力安排计划。
③设备布局计划。
④基础设施计划，如水电供应、空调、运输、通讯等。
⑤设备安装操作计划。
⑥生产管理计划。
⑦推销计划。
上述资料应于本合同生效后60天内由投资人提供中方。
(3)生产线必须按照附于本合同的生产细目表，即附件三。
(4)中方应自行准备生产计划，但必要时可要求投资人给予合作。
第三条 许可费的支付
(1)投资人向中方转让技术的许可费如下：
①中方向投资人购买产品生产权应交入门费____________美元。
②每件出售的产品应向投资人交付售价3%的提成费。
(2)一切付款应按照本合同及本条款的有关约定事项办理。
(3)一切付款应通过中国银行办理。
(4)支付方式采用不可撤销的即期信用证，用美元支付。
(5)中方应在本合同生效后一个月内，开立不可撤销的信用证向投资人支付入门费。
(6)投资人应在收到上述信用证后30天内提供合同规定的一切技术资料。
(7)中方每次向投资人订购合同规定的材料时，应在信用证的金额中加上3%的提成费;也可在支付货款时，为提成费另开一份信用证。
(8)中方负责在中国发生的一切费用;投资人负责在国外发生的一切费用。
第四条 销售
(1)投资人应帮助中方兴趣办展销会、研讨会、广告宣传等，以推销中方生产的产品。但费用应由中方负担。
(2)在开展广告宣传等活动中，中方如有需要可以使用投资人的广告标识。但投资人既不参与中方的盈亏，也不对此承担责任。
第五条 质量控制
(1)在上海制造产品的质量必须按照投资人的质量控制标准进行鉴定。
(2)上海制造产品的质量检验，在开始阶段应由双方工程是由联合进行，其细节详见附件四。
(3)上海制造产品的质量检验必要时应进行两次。如果第二次检验未能达到规格指标而且原因又是在投资人方面，则投资人应自费解决存在的问题。
(4)如果品质检验合格，双方工程是由应签署品质检验证明书一式两份，每方各执一份。
第六条 设备交货
(1)中方应向投资人购买生产产品所需的设备。
(2)生产产品所需设备的品名、规格详见附件五。
(3)中方投资人购买设备的价格细节由双方商定，并另签设备购买合同。
中方：(签字)_________________
投资人：(签字)_______________
alp：(签字)__________________
篇9：技术合同认定、登记的流程及相关优惠政策_合同范本
技术合同认定、登记的流程及相关优惠政策
为了贯彻落实《中共中央、国务院关于加强技术创新，发展高科技，实现产业化的决定》精神，加速科技成果转化，保障国家有关促进科技成果转化政策的实施，加强技术市场管理，科技部、财政部和国家税务总局共同制定了《技术合同认定登记管理办法》，以下是第一范文网小编今天要与大家分享的：技术合同认定、登记的流程以及相关优惠政策。内容仅供参考，欢迎阅读!
技术合同认定、登记的流程及优惠政策
一、 技术合同种类
(一)技术合同的概念
技术合同是当事人就技术开发、转让、咨询或者服务订立的确定相互之间权利与义务的合同。
(二)技术合同的种类
技术合同:
服务合同。
技术开发合同：委托开发、合作开发、科技成果转化。
技术转让合同：专利权转让、专利申请权转让、专利实施许可、技术秘密转让。
技术服务合同：技术服务、技术培训、技术中介。
二、办理技术合同登记的流程
(一)进行技术合同登记
1、技术合同要享受优惠政策必须进行技术合同登记。
2、登记机构为技术合同登记站。
3、技术合同生效后一年内必须登记。
4、技术合同实行网上登记，其网址：
5、具体登记流程如下：
⑴ 注册：首次申请认定登记的用户须先注册。携带机构代码证书，事业单位法人证书或企业法人营业执照等身份证明材料，到当地技术 1 技术开发合同、技术转让合同、技术咨询合同、技术
市场办公室进行注册，登记员给予“用户名ID”和“密码PW”。
⑵ 填写：卖方登录系统，选择“合同申请”，打开一张新的登记表，填写完毕并按“提交”，就完成了一份合同的网上申报
⑶ 报送：网上申报，申请单位须在30日内将合同文本及及相关附件送到选定的合同登记站进行认定登记(或通过邮寄报送)，合同登记员对照合同文本进行审核。
⑷ 认定登记：登记人员自收到合同文本之日起30日内完成技术合同的认定登记工作，对不符合登记条件的合同不予登记并做记录。
(二)办理技术合同登记所需材料
A、用户注册：机构证代码，事业单位法人证书或企业法人营业执照等原件和复印件一份;
B、合同三份，其中原件至少一份，且复印件须注明与原件相符，并加盖单位公章。
三、 办理技术合同登记后可以享受的优惠政策
办理技术合同登记后，如果符合国家技术开发、转让、咨询或服务方面的优惠政策，可以减免营业税、所得税、增值税，或成本抵扣。具体办法如下：
(一)营业税：单位和个人从事技术转让、技术开发业务和与之相关的技术咨询、技术服务取得的收入，免征营业税。(财税[1999]273号)
与技术转让 、技术开发相关的技术咨询、技术服务业务是指转让方(或受托方)根据技术转让或开发合同的规定，为帮助受让方(或委托方)掌握所转让(或委托开发)的技术，而提供的技术咨询、技术服务。且这部分技术咨询、服务的价款与技术转让(或开发)的价款是开在同一张发票上的。
从事与技术开发、技术转让相关的技术中介服务收入，经有关部门认定，可视同技术开发、技术转让 收入对待，享受有关营业税优惠政策。
(二)所得税：企业所得税法第二十七条第(四)项所称符合条件的技术转让所得免征、减征企业所得税，是指一个纳税年度内，居民企业技术转让所得不超过500万元的部分，免征企业所得税;超过500万元的部分，减半征收企业所得税。
(三)技术开发费抵扣：允许企业按当年实际发生的技术开发费用的150%抵扣当年应纳税所得额。实际发生的技术开发费用当年抵扣不足部分，可按税法规定在5年内结转抵扣。企业提取的职工教育经费在计税工资总额2.5%以内的，可在企业所得税前扣除。
(四)技术开发费抵扣明细：对上述企业在一个纳税年度实际发生的下列技术开发费项目，包括新产品设计费，工艺规程制定费，设备调整费，原材料和半成品的试制费，技术图书资料费，未纳入国家计划的中间实验费，研究机构人员的工资，用于研究开发的仪器、设备的折旧，委托其他单位和个人进行科研试制的费用，与新产品的试制和技术研究直接相关的其他费用，在按规定实行100%扣除基础上，允许再按当年实际发生额的50%在企业所得税税前加计扣除。
企业年度实际发生的技术开发费当年不足抵扣的部分，可在以后年度企业所得税应纳税所得额中结转抵扣，抵扣的期限最长不得超过五年.
(五)成本抵扣：
1、设备折旧
企业用于研究开发的仪器和设备，单位价值在30万元以下的，可一次或分次摊入管理费，其中达到固定资产标准的应单独管理，但不提取折旧;单位价值在30万元以上的，可采取适当缩短固定资产折旧年限或加速折旧的政策。
2、奖酬金
经认定登记的技术合同，属于职务技术成果的，卖方应当从技术交易的净收入中提取不低于百分之二十的资金，奖励该项成果的完成人
(六)增值税：
1、嵌入式软件(在生产过程中已经嵌入在计算机硬件、机器设备中并随同一并销售，构成计算机硬件、机器设备的组成部分并且不能准确单独核算软件成本的软件产品)不属于财政部、国家税务总局《关于鼓励软件产业和集成电路产业发展有关税收政策问题的通知))(财税[20xx]25号)规定的享受增值税优惠政策的软件产品。 (财税[20xx]165号)
2、纳税人销售软件产品并随同销售一并收取的软件安装费、维护费、培训费等收入，应按照增值税混合销售的有关规定征收增值税，并可享受软件产品增值税即征即退政策。
对软件产品交付使用后，按期或按次收取的维护、技术服务费、培训费等不征收增值税。 (财税[20xx]165号)
3、纳税人受托开发软件产品，著作权属于受托方的征收增值税，
著作权属于委托方或属于双方共同拥有的不征收增值税。(财税
[20xx]165号)
4、对经过国家版权局注册登记，在销售时一并转让著作权、所有权的计算机软件征收营业税，不征收增值税。(财税字[1999]273号)