外贸开发信怎么写【热门20篇】

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

出口独家代理协议

本协议于_________年_________月_________日在中国_________由有关双方在平等互利基础上达成，按双方同意的下列条件发展业务关系： 1.协议双方

甲方：_________

地址：_________

电话：_________

传真：_________

乙方：_________

地址：_________

电话：_________

传真：_________

2.委任

甲方指定乙方为其独家代理，为第三条所列商品从第四条所列区域的顾客中招揽订单，乙方接受上述委任。

3.代理商品

_________。

4.代理区域

仅限于_________

5.最低业务量

乙方同意，在本协议有效期内从上述代理区域内的顾客处招揽的上述商品的订单价值不低于_________美元。

6.价格与支付

每一笔交易的货物价格应由乙方与买主通过谈判确定，并须经甲方最后确认。

付款使用保兑的、不可撤销的信用证，由买方开出，以甲方为受益人。信用证须在装运日期前15天到达甲方。

7.独家代理权

基于本协议授予的独家代理权，甲方不得直接或间接地通过乙方以外的渠道向_________顾客销售或出口第三条所列商品，乙方不得在_________经销、分销或促销与上述商品相竞争或类似的产品，也不得招揽或接受以到_________以外地区销售为目的的订单，在本协议有效期内，甲方应将其收到的来自_________其他商家的有关代理产品的询价或订单转交给乙方。

8.商情报告

为使甲方充分了解现行市场情况，乙方承担至少每季度一次或在必要时随时向甲方提供市场报告，内容包括与本协议代理商品的进口与销售有关的地方规章的变动、当地市场发展趋势以及买方对甲方按协议供应的货物的品质、包装、价格等方面的意见。乙方还承担向甲方提供其他供应商类似商品的报价和广告资料。

9.广告及费用

乙方负担本协议有效期内在新加坡销售代理商品做广告宣传的一切费用，并向甲方提交所用于广告的声像资料，供甲方事先核准。

10.佣金

对乙方直接获取并经甲方确认接受的订单，甲方按净发票售价向乙方支付5％的佣金。 佣金在甲方收到每笔订单的全部货款后才会支付。

11.政府部门间的交易

在甲、乙双方政府部门之间达成的交易不受本协议条款的限制，此类交易的金额也不应计入第五条规定的最低业务量。

12.工业产权

在本协议有效期内，为销售有关洗衣机，乙方可以使用甲方拥有的商标，并承认使用于或包含于_________中的任何专利商标、版权或其他工业产权为甲方独家拥有。 一旦发现侵权，乙方应立即通知甲方并协助甲方采取措施保护甲方权益。

13.协议有效期

本协议经有关双方如期签署后生效，有效期为_________年，从_________年_________月_________日至_________年_________月_________日。除非作出相反通知，本协议期满后将延长_________个月。

14.协议的终止

在本协议有效期内，如果一方被发现违背协议条款，另一方有权终止协议。

15.不可抗力

由于水灾、火灾、地震、干旱、战争或协议一方无法预见、控制、避免和克服的其他事件导致不能或暂时不能全部或部分履行本协议，该方不负责任。但是，受不可抗力事件影响的一方须尽快将发生的事件通知另一方，并在不可抗力事件发生15天内将有关机构出具的不可抗力事件的证明寄交对方。

共3页，当前第1页123

今年以来，贵州省三都水族自治县深入贯彻落实党的十九大精神，主动谋划，开拓创新，抓实抓牢党建工作,提升服务水平。通过夯基础、补短板,建强基层组织堡垒,努力提升各级党组织的组织力、战斗力、凝聚力和号召力，发挥示范带动作用，进一步聚焦聚力脱贫攻坚，为全县经济社会跨越发展提供了坚强的组织保障。

创新思路优化基层党组织建设

着力开展后进村党组织集中整顿。突出问题导向，以提升农村基层党组织组织力为重点，对照8项指标、14项负面清单，对全县86个农村党组织进行精准识别排查，逐村分析研判。共排查9个村为后进村，并按照“一村一策”制定整顿方案落实整改，解决党组织引领不强的问题。

进一步选优配强村级党组织书记。围绕“德、能、勤、绩、廉”等方面的情况，对全县村级党组织书记作用发挥情况进行分析研判，对作用发挥不好、不胜任的坚决予以调整更换，加强村级党组织书记队伍建设，解决作用发挥不好的问题。

强化第一书记管理。选派390名驻村干部和78名第一书记入驻78个贫困村开展驻村工作，出台《三都水族自治县农村党组织第一书记管理办法》，实行县委组织部、派出单位、镇(街道)、派驻村四级联动管理，加强对第一书记日常服务、管理、考核、督查、问责，解决帮扶力度不大的问题。

党建引领提升为民服务水平

建强易地扶贫搬迁党组织。突出党建引领，运用“123456工作法”，按照建强“一个支部”，抓住党员示范和能人带动“两个关键”，组建搬迁动员专班、社区建设专班、助民增收专班“三个专班”，运用算账法、现身法、体验法、渐进法“四个方法”，落实场所建设、机构设置、制度完善、监督管理、经费保障“五个到位”，提供思想引导服务、就学服务、就业服务、就医服务、培训服务、帮带服务“六个服务”，扎实抓好6个移民安置点社区党组织建设，确保为移民群众服务到位。

实行“清单式”服务。以7个村作为试点，探索农村组织“清单式”服务，编制村级组织为民服务清单、服务事项流程图，明确服务主体、服务范围、服务标准、服务时限、服务质量等，建立公开透明、操作规范、简便高效、监督有力的村级组织权力规范运行机制，切实加强和规范村级组织工作建设，全面提高村级事务工作水平，解决服务群众“最后一公里”问题。

夯实基础增强脱贫攻坚战斗力

加大干部培训力度。20xx年以来，邀请名师到县内授课，举办2期全县村党组织书记和村(社区)委会主任脱贫攻坚轮训班，完成416名村级干部集中培训;举办全县第一书记和驻村干部轮战驻村决胜脱贫攻坚岗前专题培训班、县级党务干部培训班、党建宣传信息培训班，解决村级干部能力不足的问题。

大力实施干部下沉。出台《三都水族自治县脱贫攻坚责任包保调整方案》，采取以岗定责方式，对全县脱贫攻坚责任包保进行优化调整，全县3900多名干部包保贫困户31873户，做到贫困户干部包保全覆盖。同时下发《三都水族自治县干部下沉工作方案》，以行政村、村民小组(自然寨)以及农户为单位，划分三级网格管理体系，实现了县、乡、村三级干部目标、任务、责任的层层压实，解决脱贫攻坚责任压得不实的问题。

优化选人用人渠道。按照政治素质好、致富能力强、带富能力强“一好双强”村级干部选用标准，面向社会公开招聘村级后备干部98人，为年轻人提供可以施展才能的广阔空间，为基层党组织建设注入新的活力，进一步配齐建强村级干部队伍，解决村级干部选用渠道单一、农村能人少、无人可用的问题。

货物出口合同（英文版）

合约编号：＿＿＿＿＿＿＿＿

contractno.＿＿＿＿＿＿＿

售货合约

salescontract

－－－－－－－

买方：＿＿＿＿＿

日期：＿＿＿＿年＿＿月＿＿日

buyers:＿＿＿＿＿ cate:＿＿＿＿＿

卖方：＿＿＿＿ 中国＿＿＿进出口公司＿＿＿省分公司

sellers:chinanationalmetals&mineralsimport& exportcorporation

,____branch

双方同意按下列条款由买方购进卖方售出下列商品：

thebuyersagreetobuyandthesellersagreetosellthefollowing

goodsontermsandconditionssetforthbelow:

──────────────┬───────┬──────┬──────

（1）货物名称及规格，包装及│（2）数量 │（3）单价 │（4）总价

装运唛头 │ │ │

nameorcommodityandspeci- │qoantity │unitprice │total

ficationspackingandshpp- │ │ │amount

ingmarks │ │ │

──────────────┼───────┼──────┼──────

（装运数量允许有 ％的增减）│ │ │

（shipmentqoantity %more │ │ │

orlessallowd │ │ │

──────────────┴───────┴──────┴──────

（5）装运期限

timeofshipment:

（6）装运口岸

portsofloading

（7）目的口岸

portofdestination:

（8）保险：投保＿＿＿险，由＿＿＿按发票金额＿＿＿％，投保

tnsurance:covering risksfor____%ofinvoicevaluetobeeffected

bythe

（9）付款条件：＿＿＿……

termsofpayment:＿＿＿凭保兑的，不可撤消的，可转让的，可分割的即期付款信用证，信用证以中

国五金矿产进出口公司＿＿分公司为受益人并允许分批装运和转船。

byconfirmedirrevocable,transferableanddivisibleletterofcredit

infavourofchinanationalmetals&mineralsimport& exportcorporation

___branchpayableatsightallowingpartialshipmentsandtranshipment.

该信用证必须在＿＿＿前开到卖方，信用证的有效期应为装船期后15天，在上述装运口岸到期，

否则卖方有权取消本售货合约并保留因此而发生的一切损失的索赔权。

注意：开立信用证时，请在证内注明本售货确认书号码 chinanationaltextiesimportand

exportcorporation

important:whenestablishingl/c,please

indicatethemumberofthissalescofr shantungbranch

mationinthel/c.

买方（thebuyers）：＿＿＿＿＿

卖方（thesellers）：＿＿＿＿＿

请在本合同签字后寄回一份存档

pleasesignandreturnonecopyforoutfile.

“我志愿加入中国共产党，拥护党的纲领，遵守党的章程……随时准备为党和人民牺牲一切，永不叛党。”吴门桥街道“亲水吴门”党群服务中心是苏州首批“海棠花红”先锋阵地，现在服务中心里面气氛庄严，几排年过花甲的老党员列着整齐的队伍，面对着党旗庄严地举起右手，重温入党誓词。虽然声音有点沙哑，有些还带着浓浓的乡音，但是看到他们坚毅的眼神和庄重的表情，依然能感受到他们内心的热血沸腾、激情澎湃，仿佛回到了几十年前正式入党的那一刻。

这是吴门桥街道南二社区党支部为60岁以上老党员过集体政治生日的一幕。作为本次重温誓词的领誓人，南二社区党支部的老党员王建栋显得有点激动：“以前党组织办活动都是在社区的会议室里开展，今年开始街道党群服务中心里给我们布置了专门的场所。在这里，党组织为我们过政治生日，组织大家一起重温入党誓词，这样的仪式教育，既让我感受到了党组织的关怀，又让我想起了作为一名党员的荣誉和责任。”

在“海棠花红”先锋阵地群建设中，苏州在县级市(区)、镇(街道)、村(社区)三级党群服务中心全面打造“政治信仰空间”，突出鲜明时代感，增强历史厚重感，通过设置庄严肃穆的环境氛围，精心设计党旗、党徽、入党誓词等党建元素，综合设置党建成就和党史知识展示，创新运用现代声光电技术提升展示和教育效果，使党员在场馆内能强烈感受到神圣的红色氛围。依托“政治信仰空间”，大力开展党员仪式教育，针对新党员入党宣誓、党员接转党组织关系、日常组织生活、重大节日纪念、党员政治生日等多种场景，规范设置仪式教育流程，创新运用现代化的方式手段和直抵人心的教育形式，使党员在其中感受精神洗礼、荡涤心灵，形成个体自觉、集体记忆。

进口合同(样式一)

（3）金额为合同总价的形式发票一式六份。

（4）即期汇票一式二份。

（5）商业发票一式六份。

上述单据卖方应于本合同生效日起三十天内提交。

4.2.2 合同总的＿＿％，计＿＿（大写：＿＿），在卖按本合同第五章规定交货时，买方在收到卖方提交的下列单据经审核无误后不迟于三十天，将每批交货总价的＿＿％支付给卖方：

（1）全套清洁无疵、空白抬头、空白背书并注明“运费到付通知目的港中国对外贸易运输公司”的海运提单正本三份，副本三份；

（2）商业发票一式六份；

（3）即期汇票一式二份；

（4）详细装箱单一式六份；

（5）质量合格证一式六份。

4.2.3 合同总价的＿＿％，计＿＿（大写：＿＿），在买方收到下列单据经审核无误后不迟于三十天支付给卖方：

（1）商业发票一式六份。

（2）双方代表按本合同第九章规定签署的合同工厂交接验收证书的影印本一份。

（3）即期汇票一式二份。

4.2.4 合同总的＿＿％，计＿＿（大写：＿＿）。在按本合同第十章规定“合同工厂”保证期满后，买方在收到卖方提交的下列单据经审核无误后不迟于三十天即支付给卖方：

（1）商品发票一式六份；

（2）双方代表按本合同第十章规定签署的合同工厂保证期结束的确认书影印本一份；

（3）即期汇票一式二份。

4.2.5 合同总价的＿＿％，计＿＿（大写：＿＿）。买方应自＿＿日起，于＿＿年内，每＿＿个月为一期，平均分期按下列办法支付给卖方。

4.2.5.1 卖方应开立分＿＿期支付具有下述内容的远期汇票共＿＿份，每份正副本各一份于＿＿时提交买方：

（1）票面金额为合同总的＿＿％，另加第＿＿章＿＿条规定的延期付款的利息，计（大写：＿＿）；

（2）以＿＿日期为出票日，到期日分别为自出票日满＿＿个月；

（3）以买方为付款人；

（4）带有利息条款。利息按年息＿＿％计算自出票日起算至到期日止。具体金额如下：

票期 本金 利息 本利合计

第一期

第二期

……

合计

4.2.5.2 买方收到汇票后，于＿＿时即对上述分＿＿期支付的汇票正本承兑，并交北京中国银行背书保证后送交卖方。

4.2.5.3 卖方收到汇票后应在各期汇票到期日前，分别将汇票正本提交北京中国银行，由北京中国银行提请买方于汇票到期日后一天支付给卖方。

4.3 按本合同第＿＿章和第＿＿章规定，如果卖方应支付赔款或/和罚款等有关款项时，买方在按本章第4.2.2条，4.2.3条4.2.4条规定支付货款时有权从货款中扣除。

4.4 买方支付本章第4.2.1条所规定的货款时，应向卖方提交中国银行出具的以卖方为受益人金额为合同总价＿＿％和延期付款的利息的保证函（保证函格式详见本合同附件八）。

4.5 买卖双方因履行本合同所发生的银行费用，在中国发生的，均由买方负担，在中国以外发生的，均由卖方负担。

（注：方案二各项条款适用于延期付款的情况）

第五章 交货与交货条件

5.1 卖方应于本合同生效日后＿＿个月内分＿＿批将本“合同工厂”的“设备”交付完毕。

共17页，当前第6页1234567891011121314151617

本合同由ABC公司，主营业所在中国_(以下称甲方)，与XYZ公司，主营业所在美国_(以下称乙方)于19_年X月X日在中国_签署

兹证明

鉴于乙方拥有现用于制造钢丝绳的机器设备，并愿意将机器设备卖给甲方

鉴于乙方同意购买甲方用已方提供的机器设备生的产钢丝绳，以补偿其机器设备的价

鉴于甲方向意向乙方出售钢丝绳，以偿还乙方的机器设备价款;

因此，考虑到本协议所述的前提和约定，甲、乙双方物此立约：

1.购买协议

甲方同意从乙方按一下列条款购买下述商品：

1. 1商品、规格及其生产能力：

商品：

规格：

生产能力：

1.2 数量：2台。

1.3 价格：

港FOB价：

单价： 总价：

1.4 支付：

机器设备价款以甲方的产品--钢丝绳偿还，全部价款在边疆三年内平均三次付清，自_日开始支付。

1.5 装运：

装运期： 装运港：

目的港： 装运唛头：

1.6 保险：

由甲方保险。

1.7 检验：

1.8 保证：

乙方保证其机器设备从未用这，性能先进，质量好，并保证该机器能生产_规格钢丝绳，产量每小时_米。

2. 销售协议

甲方以钢丝黾偿还购买乙方机器设备的价款。

2.1 商品及规格：

商品：钢丝绳。

规格：

2.2 数量：

铡丝绳每年_米。

2.3 价格：

钢丝绳的价格按交货时国际市场CIF价确定

2.4 装运：

每年两次装运，一次在六月，另一次在十二月，每次货价为_。

装运港：

目的港：

法语运唛头：

2. 5包装：

木卷轴装。

2.6支付：

凭以甲方为受益人的保兑的，不可撤销的即期信用证，允许转船。信用证必须于装运日期前15天到达甲方，有效期不少于90天。

信用证要与本合同完全一致，否则，乙对迟装负责;而且，甲方有机就其中的损失向乙方提出索赔。修改信用证的费用由乙方承担。

2. 7保验：

甲方保险，投保水渍险和战争险，投保金额为发票金额加10%

2.8 检验：

甲方出具的品技检验证书为最后依据。若货到后乙方发现质量与上述规定不符，乙方在货到目的港后45天内通知甲方，双方协商解决有争义的问题。

3. 不可抗力

若因不可抗力事故，甲方或乙方对未交或迟交本合同项下的部分或全部货物不负责任。

4. 仲裁

有关或执行本合同的一切争议应该友好协商解决。若达不成协议，有关争议案则提交_仲裁。仲裁决定为终局的，并对双方均具有约束力。

5. 适用法律

本合同的签订，解释和履行以中华人民共和国法律为准。

6. 正本条款

本合同以英文书写，正本两份，每方各持一份。

7. 有效期

甲方： 乙方：

1、负责玻璃瓶外发加工采购合同的下单、跟单;

2、根据客户订单要求，安排供应商打样、确认最后的签样;

3、熟悉玻璃瓶后加工工艺【抛光/喷涂/丝印/高温丝印/烫金银/电镀】，对采购订单的要求和交期进行掌控，确保生产顺利进行;

4、对每日应到物料及时跟进与确认，做好物料账目记录和核查，协助来货的质检，对出现来料异常等问题及时与供应商协商;

5、严格执行采购订单的交货日期和交货要求，把关采购质量、数量、成本;

6、月底与供应商对账，完成清款工作;

7、定期配合仓库对采购物料进行盘点;

8、做好外发物料在外厂仓库之间中转的出库和入货单据录入工作;

9、上级安排的其他临时性工作。

甲方 县 养殖有限公司。

法定代表人 ，执行董事。 乙方 县 乡 村 村民小组。

负责人 为发展林业生产，培育和合理使用林木资源，加快荒山绿化，发挥森林蓄水保土、调节气候、改善环境作用，促进鲁山经济发展，根据上级开发荒山精神，经甲乙双方充分协商，特订立本合同，以便双方共同遵守。

一、乙方将自己所有的坐落在 的荒山 亩发包给甲方从业种植等农业生产经营，地块南北长 米，东西长 米，四至为南至 ，北至 ，东至 ，西至(大 沟、小 沟堰滩的栗子树 亩除外，土地示意图见本合同书附件一)。

二、承包期限为 年，自 年 月 日起至 年 月 日止。

三、承包费用为每亩每年 元，共计 元(大写： )。

四、合同签字当日甲方向乙方预付 年承包费用 元(含其中一次性补偿毁掉原荒山杂树款)，以后每年12月31日前付清当年承包款项。

五、对本合同条款，乙方已于 年 月 日召集村民代表会议讨论，获得村民代表会议全票通过(村民代表会议决议见本合同书附件二)。乙方依据该决议并根据该次村民代表会议的授权与甲方签订本合同书。

六、甲方在开发承包荒山期间，在同等条件下优先使用乙方所属村民，报酬由甲方承担。

七、甲方因植树需架设管道从河中取水，乙方不得干涉及收取任何款项，发生纠纷由乙方负责解决。

八、甲方在荒山承包荒山期间，所规划树木株距之间原先种植的树木，可随时采伐;行距之间原先种植的树木在新栽树木成活率达到60%以上后再采伐，所采伐树木由甲方自行处理。

九、乙方人员在采摘大南沟、小南沟堰滩栗子时，不得破坏甲方承包范围内的树木，造成损失的由乙方承担赔偿责任。

十、甲方取得土地承包经营权后，只能用于国家法律、法规和政策允许的农业用途;在法律、法规和政策允许范围内，甲方拥有原承包荒山范围内的一切使用权，乙方不得干涉。

十一、乙方同意甲方在不违反国家法律、行政法规强制性规定的前提下，可以自主采取转包、转让、出租等方式实现土地承包经营权流转。土地承包经营权流转取得的收入全部归甲方享有，乙方不得对此主张任何权利。

十二、在本合同有效期间，甲乙任何一方不经对方书面同意，不得擅自变更或解除本合同。

十三、本合同履行期间，不因下列情形发生改变，甲乙双方仍应按本合同书约定内容履行各自义务：

1、甲方或乙方的负责人、经办人变更;

2、甲乙双方名称改变;

3、乙方分离为两个或两个以上的村民委员会，或者乙方与其他村民委员会合并为一个村民委员会。

十四、本合同书未尽事宜，由甲乙双方友好协商予以补充;补充合同视为本合同书的有机组成部分。

十五、如因本合同发生纠纷，由甲乙双方友好协商予以解决;协商不成或者不愿协商的，任何一方均可向甲方住所地人民法院提起诉讼。

十六、本合同书自双方当事人签章之日起生效。

十七、本合同书一式两份，甲乙双方各持一份。

甲方 县 养殖有限公司(盖章)

法定代表人(签章)

乙方 县 乡 村 村民小组(签章)

负责人(签章)

年 月 日

委托方(甲方)：__________

受托方(乙方)：__________

按照《中华人民共和国合同法》的有关规定，甲乙双方本着互惠互利的原则和相互合作与支持的宗旨，就甲方委托乙方为货物运输代理等事宜，经友好协商达成如下协议。

第一条 甲方责任和义务

1甲方最少在货物抵达前__________(船到港前三天、航班到港前24小时)通知乙方货物到达情况和提供有关文件，有关文件包括：海洋提单、空运提单、货物资料、报关和报检报验文件等，以便乙方安排换单和提前审核有关文件。

2.甲方委托乙方代理申报的进口货物，必须按照中华人民共和国海关、商品检验检疫及相关部门对于国家进口货物的有关规定，如实申报。

3.甲方根据乙方要求，负责提供下列全部或部分单据和文件：报关委托书、报检委托书;手册;正本提单、发票、箱单、合同;报关所需要进口许可证如系危险品，应提供相关文件;其他与进出口货运有关的单据和文件。

4.由于甲方或下列原因导致货物申报时间的延迟，而造成未能及时清关或货物疏港等，由甲方承担所产生的风险、责任及费用，而乙方不予承担：

(1)因买卖双方原因导致提单不能在公司正常换取(如海运费用未结清等);

(2)由于甲方未能及时提供进口报关所需的全部资料;

(3)因甲方所提供的报关资料失实，而导致的延迟;

(4)在清关过程中由于海关等相关部门要求，需要补充或修改有关单证及相关说明资料，而甲方未能及时提供;

(5)遇到法定节假日或有关部门不能正常办公;

(6)因港口要求和规定而必须输港的货物;

(7)其他甲方及不可抗拒原因。

5.由于非乙方原因造成滞箱费、污箱费、修箱费等费用和责任，由甲方承担，乙方尽量协助甲方协商解决。

第二条 乙方责任和义务

1.乙方应及时、合理安排甲方所委托进口货物的换单、申报、运输等事宜。

2.乙方应及时通知甲方有关报关进度、预计送货时间，以便甲方合理安排仓库装卸。

3.乙方应积极协助甲方解决在报关过程中出现的各种问题和状况，包括文件的提供、解释、说明等工作。

4.乙方应以最快的速度完成清关工作，并按甲方的指示将货物送到指定地点。

第三条 费用结算

1.按照海关的有关规定，甲方应自行向海关缴付货物进口关税及增值税，特殊情况可以委托乙方代缴，但乙方不予以垫付。

2.甲方应自行交付到付运费(海运费和THC、空运费)，特殊情况可以委托乙方代付，但乙方不予以垫付。若由于甲方不能提供进出口货物单据或用以缴纳进口关税及增值税的限额支票而产生的相关费用，如滞报金、滞箱费、港口费、滞纳金、转栈费等经甲方确认后由甲方。

3.如因各种原因乙方无法收到甲方应付之费用，则乙方有权暂扣甲方委托乙方所管理的货物或属于甲方的业务文件，所造成的风险、责任及费用，乙方不予承担。

4.非甲方原因产生的特殊费用和责任，甲方不予以承担。

5.附《进口货物运输费用报价》。

第四条 结算方式

乙方应于每月__________日前将本月账目清单(如实报实销则提供发票)送交甲方，甲接到账目清单核对无误后通知乙方开具正式发票，发票开具后__________日内付款。

第五条 货物灭损

甲方未办理货物申明价值的，由于承运人或乙方的原因造成货物灭损的，按货物实际损失赔偿，但赔偿额最高按灭损货物毛重每公斤人民币__________元(国内航线)/国际__________美元(US$)(国际航线)计算。

第六条 检验

运输过程中，允许托运单上甲方记载的货物件数、重量、体积与实际托运的货物存在略微差异。货物准确的件数、重量、体积以乙方接收货物时乙方的检验为准。如果甲方对乙方的检验结果存在异议，可书面向乙方申请双方联合检验。如果联合检验的结果

第七条 担保

为了顺利执行本协议，按时结清账目，乙方应以人民币__________元或每张货运单__________元提供保证金或等值的房地产抵押等甲方认为满意的担保。

第八条 转让

本协议所规定的乙方的权利和其他职责，未经甲方的书面同意，乙方不得将其全部或部分转让，或者授权给任何第三方。

第九条 违约责任

1.乙方未依本协议向甲方支付费用，或支付费用不完整的，乙方必须从支付期满__________日起，按应付款向甲方每日支付__________元违约金。

2.乙方无正当理由__________天不履行某一个月的全部费用或所欠费用超过全部应付费用的时，甲方可以解除协议并按上款要求违约金。

3.甲乙双方违反本协议造成对方损失的，按违约时的实际损失赔偿对方。

第十条 抵消

依据法律或本协议约定乙方应支付甲方的违约金或其他款项将被视为甲方的可向乙方主张的债权，对该债权的实现双方同意甲方可以主张从甲方应支付乙方的本协议下的款项或其他甲方应支付乙方的款项中直接扣除直至抵消完毕，不足的部分乙方当然同意予以补足。甲方没有从应支付乙方的款项中扣除的并不应该视为甲方对主张该违约金或款项的放弃。

第十一条 解除

1.甲方未及时、全面、正确履行合同约定之义务的，乙方将书面催告甲方予以正确履行，甲方在乙方催告后__________日内仍不能整改到位的，乙方将有权解除合同。但该合同解除的权利乙方在__________日内未向甲方主张的，则该权利消灭。

2.若合同一方不能清偿到期债务或因其他原因进入破产程序，则另一方取得在书面通知对方后即解除合同的权利。甲方因进入经营困难的境地，使履行合同成为一种不可能或一种沉重的负担，则乙方应许可甲方有权解除合同。

3.为对等之目的，乙方未及时、全面、正确履行合同约定之义务的，甲方将书面催告乙方予以正确履行，乙方在甲方催告后__________日内仍不能整改到位的，甲方将有

4.合同解除后甲方提供给乙方的相关单据和文件乙方应当及时返还甲方，不得未经甲方同意擅自留存、复制。

5.尽管有上述之约定，在合同解除后若乙方尚有甲方的业务正在进行的，乙方仍应当妥善予以完成，由此发生的费用甲方当然将按照本协议的收费标准向乙方支付相关费用。若因乙方违反本款的约定导致甲方受有损失的，则乙方应当负责赔偿。

第十二条 声明及保证

甲方：

1.甲方为一家依法设立并合法存续的企业，有权签署并有能力履行本合同。

2.甲方签署和履行本合同所需的一切手续均已办妥并合法有效。

3.在签署本合同时，任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对甲方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.甲方为签署本合同所需的内部授权程序均已完成，本合同的签署人是甲方的法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

乙方：

1.乙方为一家依法设立并合法存续的企业，有权签署并有能力履行本合同。

2.乙方签署和履行本合同所需的一切手续均已办妥并合法有效。

3.在签署本合同时，任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对乙方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.乙方为签署本合同所需的内部授权程序均已完成，本合同的签署人是乙方的法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

第十三条 保密

双方保证对从另一方取得且无法自公开渠道获得的商业秘密(技术信息、经营信息及其他商业秘密)予以保密。未经该商业秘密的原提供方同意，一方不得向任何第三方泄露该商业秘密的全部或部分内容。但法律、法规另有规定或双方另有约定的除外。保密期限为__________年。

一方违反上述保密义务的，应承担相应的违约责任并赔偿由此造成的损失。

第十四条 不可抗力

本合同所称不可抗力是指不能预见、不能克服、不能避免并对一方当事人造成重大影响的客观事件，包括但不限于自然灾害如洪水、地震、火灾和风暴等以及社会事件如

如因不可抗力事件的发生导致合同无法履行时，遇不可抗力的一方应立即将事故情况书面告知另一方，并应在__________天内，提供事故详情及合同不能履行或者需要延期履行的书面资料，双方认可后协商终止合同或暂时延迟合同的履行。

第十五条 通知

1.根据本合同需要发出的全部通知以及双方的文件往来及与本合同有关的通知和要求等，必须用书面形式，可釆用__________(书信、传真、电报、当面送交等方式)传递。以上方式无法送达的，方可釆取公告送达的方式。

2.各方通讯地址如下:__________。

3.一方变更通知或通讯地址，应自变更之日起__________日内，以书面形式通知对方;否则，由未通知方承担由此而引起的相应责任。

第十六条 争议的处理

1.本合同受__________国法律管辖并按其进行解释。

2.本合同在履行过程中发生的争议，由双方当事人协商解决，也可由有关部门调解;协商或调解不成的，按下列第__________种方式解决：

(1)提交__________仲裁委员会仲裁;

(2)依法向人民法院起诉。

第十七条 解释

本合同的理解与解释应依据合同目的和文本原义进行，本合同的标题仅是为了阅读方便而设，不应影响本合同的解释。

第十八条 补充与附件

本合同未尽事宜，依照有关法律、法规执行，法律、法规未作规定的，甲乙双方可以达成书面补充协议。本合同的附件和补充合同均为本合同不可分割的组成部分，与本合同具有同等的法律效力。

第十九条 合同效力

本合同自双方或双方法定代表人或其授权代表人签字并加盖公章之日起生效。有效期为______年，自___年___月____日至___年___月___日。本合同正本一式__________份，双方各执__________份，具有同等法律效力;合同副本__________份，送__________留存一份。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

项目名称：

委托方(甲方)：

受托方(乙方)： 签订时间：

签订地点：

有效期限： 年 月 日- 年 月 日

中华人民共和国科学技术部印制

填 写 说 明

一、 本合同为中华人民共和国科学技术部印制的技术开发(委托) 合同示范文本，各技术合同登记机构可推介技术合同当事人参照使用。

二、 本合同书适用于一方当事人委托另一方当事人进行新技术、新 产品、新工艺、新材料或者新品种及其系统的研究开发所订立的技术开 发合同。

三、 签约一方为多个当事人的，可按各自在合同关系中的作用等， 在“委托方”、“受托方”项下(增页)分别排列为共同委托人或共同受 托人。

四、 本合同书未尽事项，可由当事人附页另行约定，并可作为本合 同的组成部分。

五、 当事人使用本合同书时约定无需填写的条款，应在该条款处注 明“无”等字样。

技术开发(委托)合同

委托方(甲方)：

住所地：

法定代表人：

项目联系人：

联系方式：

通讯地址：

电话：

电子信箱：

受托方(乙方)：

住所地：

法定代表人：

项目联系人：

通讯地址：

电话：

电子信箱：

范本 委托方:,以下简称甲方; 法定代表人或负责人:__; 研究开发方:_,以下简称乙方; 法定代表人或负责人:。 依据《民法典》的有关规定,经双方当事人协商一致,签订本合同。

1.项目名称:__。 (注:本参考格式适用于新技术、新产品、新材料、新工艺及其系统的研究开发活动。)

2.本技术开发项目在国内外的现状、水平及发展趋势:_。

3.本研究开发成果应达到的技术水平___。

4.甲方的主要义务:

(1)向乙方支付约定的项目投资(包括研究开发经费和报告。合同约定研究开发经费的一定比例作为科研补贴的,可以不单列报酬) 项目投资总额为____。 其中:设备费;材料费__; 能源费__;试验费__; 试制费__;安装费__; 调式费__;文件编制费;

(2)按照如下方式分期支付上述项目投资:__。 (注:当事人通常可以选择下列支付方式:

①实报实销的方式;

②一次总算,分期支付,包干使用的方式;

③研究开发经费提成费的方式)。

(3)在合同生效后____日内向乙方提供下列技术背景资料和原始数据:

(4)甲方应向乙方提供如下的协助事项_。

(5)甲方应当及时进行如下事项接受研究开发成果。 (注:如果合同中有专门的约定,委托方还有义务向研究开发方提供下列协助;提供研究开发样品、模具、根据应用目的和工艺可能提出明确的技术经济指标,对样品进行加工、测试;对工艺装备的安装、调试和维修,以及组织成果技术鉴定等等。)

5.乙方的主要义务:

(1)认真制定和实施研究开发计划。 本研究开发项目的计划和速度(分阶段解决的主要技术问题、达到的目标和完成的时间)如下:。 本研究开发项目所采用的主研究、试验方法和技术路线(包括工艺流程)如下:_。

(2)合理使用研究开发经费。乙方对研究开发经费的使用,应专款专用,不得挪作他用。

(3)__年____月____日前在地向甲方交付约定的研究开发成果(注:当事人可以约定采取下列一种或者几种方式提交研究开发成果);

①产品设计、工艺规程、材料配方和其他图纸、论文、报告等技术文件;

②磁带、磁盘、计算机软件;

③动物、植物新品种、微生物菌种;

④成套技术设施。

(4)提供下列必要的技术指导和技术服务工作_。 注:如果合同中有专门的约定,研究开发方还有义务向委托方提供下列协作事项:提供技术咨询服务(如市场预测、价值工程、可行性论证等);对委托方人员进行技术培训;提供有关新的技术发展状况的情报资料;协助制定有关操作、工艺规程;提出技术开发总结报告或组织成果技术鉴定;此外,在不妨碍自己研究开发的正常工作的情况下,有义务接受委托方对自己履行合同和经费使用情况的检查。 当事人双方除应履行上述各自主要义务外,还可以约定在合同的订立和履行过程中承担相互不断地通报合同履行情况的义务。尤其是那些对合同的订立或履行有妨碍的情况,如遇到情报交流上的障碍、技术风险以及研究开发经费超支或盈余等等)。

6.甲方的违约责任:

(1)甲方迟延支付研究开发经费,造成研究开发工作停滞、延误的,乙方不承担责任。甲方应当支付数额为投资总额___%的违约金。逾期一定期限不支付研究开发经费或者报酬的,乙方有权解除合同,甲方应当返还技术资料或者有关技术成果补交应付的报酬,支付数额为项目投资总额____%的违约金。

(2)甲方未按照合同约定提供技术资料、原始数据和协作事项或者所提供的技术资料、原始数据和协作事项有重大缺陷,导致研究开发工作停滞、延迟、失败的, 甲方应当承担责任,但乙方发现甲方所提供的资料和数据有明显错误而没有通知甲方复核更正和补充的,应当承担相应的责任。甲方逾期二个月不提供技术资料、原始数据和协作事项的,乙方有权解除合同,甲方应当支付数额为项目投资总额___%的违约金。

(3)甲方逾期二个月不接受工作成果的,乙方有权向合同外第三方转让或变卖工作成果。

7.乙方的违约责任:

(1)乙方未按计划实施研究开发工作的,甲方有权要求其实施研究开发计划并采取补救措施。乙方逾期二个月不实施研究开发计划的,甲方有权解除合同。乙方应当支付数额为项目投资总额___%的违约金。

(2)甲方将研究开发经费用于履行合同以外的目的,甲方有权制止并要求其退还相应的经费用于研究开发工作。因此造成研究开发工作停滞、延误或者失败的,乙方应当支付数额为项目投资总额____%的违约金并赔偿损失经甲方催告后,逾期二个月未退还经费用于研究开发工作的,甲方有权解除合同。乙方应当支付违约金或者赔偿因此给委托方所造成的损失。

(3)研究开发成果部分或者全部不附合合同约定条件的,乙方应当返还部分或者全部研究开发经费,支付数额为项目投资总额___%的违约金。

8.研究开发成果的归属和分享: 履行本合同所完成的研究开发成果的专利权归方所有。 注

(1):取得专利权的一方通常应允许另一方实施该项专利并可以优先受让该专利权。) 注

(2):如果双方当事人没有就该研究开发成果申请专利的意图,双方可以对该非专利技术成果的使用权和转让权作出约定;如果合同没有约定,视双方都有使用和转让的39;权利,但是,根据法律规定,研究开发方在将技术成果交付委托方之前,不得向第三方转让。) 注

(3):如果当事人依据互利有偿的原则,运用工业产权规范中常见的普通许可、排它许可、独占许可等方法,就可以比较圆满地体现出权限与投资之间的关系。即:

①委托方向研究开发方支付了部分研究开发经费和报酬的,可对技术成果(包括专利技术和非专利技术,下同)享有普通实施权;研究开发方自己保留使用权和向第三方转让的权利。

②委托方向研究开发方支付了全部的研究开发经费和报酬的,可对技术成果享有优先实施权;研究开发方在约定的期限或范围内,自己可保留使用权,但不得向第三方转让该成果。

③委托方除了向研究开发方支付了全部的研究开发经费和报酬外,还支付了约定的独占费用的,则可在合同规定范围内对研究开发成果享有安全的使用权和转让权(独占权);研究开发方自己不得使用亦不得向第三方转让该技术成果。 注

(4):委托方如果有意获得该技术成果完整的专利申请权或专利权,也可以根据协商一致、平等有偿原则与研究开发方另外订立专利申请权或专利转让合同。

9.保密条款: 本合同有效期内,双方当事人应对下列技术资料承担保密义务____本合同期满后__年内,双方当事人应对下列技术资料承担保密义务___。

10.技术风险的承担: 在履行本合同中,因出现无法克服的技术困难,导致研究开发失败或部分失败的,由此造成的风险损失由____方负担。 当事人一方发现前款所列可能导致研究开发失败或部分失败的情形时,应当及时通知另一方并采取措施减少损失。没有及时通知并采取适当措施,致使损失扩大的,应就扩大的损失承担责任。 1

1.验收的标准和方法:。 1

2.合同争议和解决办法如下:__。 1

3.有关名词和术语的解释:__。 本合同自双方当事人签字盖章之日起生效。 甲方负责人(或授权代表) 乙方负责人(或授权代表) 签名:(盖章) 签名:_(盖章) 签字时间:_ 签字时间:___ 签字地点:_ 签字地点:___ 开户银行:_ 开户银行: 帐号:___ 帐号:___ 甲方担保人(名称):___ 甲方担保人(名称):____ 地址:____ 地址:____

房地产联合开发协议

甲方：_________

地址：_________

邮码：_________

电话：_________

法定代表人：_________

职务：_________

乙方：_________

地址：_________

邮码：_________

电话：_________

法定代表人：_________

职务：_________

根据《中华人民共和国合同法》及其他有关法律、法规之规定，为明确责任，恪守信用，特签订本合同，共同遵守。

第一条 项目内容及规模

总投资及资金筹措：总投资_________万元（其中：征地费_________万元，开发费_________万元，建筑安装费_________万元）。投入资金规模_________万元，甲方出资_________万元，分_________次出资，每次出资_________万元，预收款_________万元；乙方出资_________万元，分_________次出资，每次出资_________万元。

第二条 合作及经营方式

合作方式：_________

各方负责：

甲方：_________

乙方：_________

经营方式：_________

第三条 资金偿还及占用费

资金占用费按月利率_________‰计付，并于每季末的前_________天内付给出资方。资金的偿还按如下时间及金额执行_________。

最后一次还款时，资金占用费随本金一起还清。

第四条 财务管理

1.成本核算范围：_________

2.决算编制：_________

3.财产清偿：_________

4.利润分配：_________

第五条 违约责任：_________

第六条 其他

1.该项目资金在_________行开户管理。

2._________方经济责任由_________担保。保证方有权检查督促_________方履行合同，保证方同意当_________方不履行合同时，由保证方连带承担经济责任。

3._________方愿以_________作抵押品，另附明细清单作为本合同的附件。_________方不履行合同时，_________方对抵押品享有处分权和优先受偿权。

第七条 本合同正本一式_________份，甲方执_________份，乙方_________份。合同副本_________份，报送_________等有关单位各存1份。双方代表签字后生效。

本合同附件有_________与本合同有同等效力。

第八条 本合同的修改、补充须经甲乙双方签订变更合同协议书，并须保证方同意作为合同的补充部分。

甲方（盖章）：_________              乙方（盖章）：_________

法人代表（签字）：_________          法人代表（签字）：_________

_________年____月____日              _________年____月____日

甲方：(委托人)___________________

法定代表人：_______________________

法定地址 ：________________________

邮编：_____________________________

经办人：___________________________

联系电话：_________________________

传真：_____________________________

银行账户 ：________________________

乙方：(代理人)___________________

法定代表人：_______________________

法定地址 ：________________________

邮编：_____________________________

经办人：___________________________

联系电话：_________________________

传真：_____________________________

银行账户 ：________________________

甲乙双方经过友好协商，就办理甲方货物海运进口转运事宜达成如下合同：

1.乙方接受甲方的委托，在港口为其代办下列海运进口货物的交接、国内转运业务。

货物基本情况如下：

货物来源：________________________

货卸码头：________________________

进口日期：________ 船名：________ 提单号码：________ 唛头：________

合同号码：________ 货物：________ 名称：________ 集装箱数量：___________

包装：________ 数量：________ 毛重：________ 体积：________

2.代理运输方式为，自________至到站(专用线)/港，交收货人________________________(全称)。

3.甲方同意支付与上述货物运输有关的港口费、舱底卸货费、定额费、劳务费、验箱费、滞箱费、特殊换单费等。

4.甲方对于货物运输的特殊要求如下：________________________ 。

5.甲方在对外签订进出口贸易合同时，应明确规定提单通知人为乙方，并将编制的货物装船标志告知乙方。

6.甲方应在船抵港日天前，将下列报关必须的单证文件送达乙方：

(1)提单及其他航运单证;

(2)商业发票

(3)装箱单

(4)进口贸易合同

(5)进口免税表/许可证/手册/证明;

(6)报关委托书

(7)海关、铁路部门或港务局临时或特殊要求的其他文件。

甲方应保证所提供的报关单证无讹，且单单一致和单货一致，因单据问题造成的一切后果由甲方承担。

7.甲方委托乙方代为报关、报验时，须办理相应的委托手续，并出具书面的授权委托书。

8.货物体积、重量、件数与托运单不符的或货物溢短装、残损时，转运用铁路运输时，以铁路部门记载的货物状况为佳;转运用公路运输时，以公路部门出具的公路运单上记载的货物状况为准;并以此作为收费依据。

9.由于甲方未及时付清运费及其他相关费用或提供单据不及时而造成货物运输延迟或者被乙方留置所产生的损失由甲方自行承担。

10.当发生以下情况时，乙方对于货物灭失或者损坏不承担任何责任：

(1)天灾，包括自然灾害，例如但不限于雷电、台风、地震、洪水等，以及意外事故，例如但不限于火灾、爆炸、由于偶然因素造成的运输工具的碰撞等;

(2)战争或者武装冲突;

(3)抢劫、盗窃等人为因素造成的货物灭失或者损坏;

(4)政府或者主管部门的行为、检疫限制或者司法扣押;

(5)罢工、停工或者乙方雇佣的工人劳动受到限制;

(6)甲方的过失造成的货物灭失或者损坏;

(7)货物的自然特性或者固有缺陷;

(8)货物包装不良或者标志欠缺、不清;

(9)非由于乙方或者乙方的受雇人、代理人的过失造成的其他原因导致的货物灭失或者损坏，对于第6款免除责任以外的原因，乙方不负举证责任。

11.乙方接受甲方委托后要迅速办理各项委托事宜。乙方应及时向甲方提供运输信息，及时传递应返回的运输单证。乙方对于其过失而导致甲方遭受的直接损失和发生的费用承担责任。以上损失不包括货物因延迟等原因造成的经济损失。在任何情况下，乙方的赔偿责任都不应超出每件元人民币或每公斤元人民币的责任限额，两者以较低的限额为准。

12.凡保险责任只到卸货港口(库、场)或者集装箱拆箱后的货物，乙方为维护甲方的利益可代为办理加保手续，其费用由甲方承担。如甲方不同意在港口办理保险，则应在合同中注明或者在货物抵港前书面通知乙方。

13.双方可以约定代理费用的支付方式，或港口费用实报实销加上代理费用;或采用统一代运包干费率。

代理费率：

(1)散货：________________

(2)集装箱：标准箱 非标准箱

(3)大件咨询费：________________

(4)每件提单起码费用：________________

(5)保险费：________________

(6)其他费用：________________

14.不属于代理人代垫费用范围的海关关税、检验费、国内运输保险费、运费等费用一律向委托人实报实销。

15.为了甲方利益，无须经甲方特别授权乙方可以代为支付运费、关税等费用。甲方应在收到乙方帐单之日起7天内向乙方支付上述费用。逾期不付，按每日万分之五支付违约金。同时乙方保留通过留置货物或滞留单据来获得相关补偿的权利。

16.甲方在船抵港前将代运预算费用汇入乙方账户，多退少补。

17.合同双方可以依据《民法典》的有关规定解除合同。

18.本合同项下发生的任何纠纷或者争议，应提交中国海事仲裁委员会，根据该会的仲裁规则进行仲裁。仲裁裁决是终局的，对双方都有约束力。

本合同的订立、效力、解释、履行、争议的解决均适用中华人民共和国法律。

19.本合同从甲乙双方签字盖章之日起生效，合同有效期为一天，合同期满之日前，甲乙双方可以协商将合同延长____天。合同期满前，如果双方中任何一方欲终止合同，需以书面的形式通知另一方。

20.本合同经双方协商一致可以进行修改和补充，修改及补充的内容经双方签字盖章后，视为本合同的一部分。本合同正本一式__份。

甲方：________________

签字盖章：____________

_______年____月_____日

乙方：________________

签字盖章：____________

_______年____月_____日

2017年技术开发合同模板

项目名称:______________

委托方:

(甲方)________________

研究开发方:

(乙方)______________

签订地点: 省 市(县)

签订日期: 年 月 日

有效期限: 年 月 日至 年 月 日

填写说明

一、“合同登记编号”的填写方法:

合同登记编号为十四位,左起第一、二位为公历年代号,第三、四位为省、自治区、直辖市编码,第五、六位为地、市编码,第七、八位为合同登记点编号,第九至十四位为合同登记序号,以上编号不足位的补零,各地区编码按gb2260-84规定填写。(合同登记序号由各地区自行决定)

二、技术开发合同是指当事人之间就新技术、新产品、新工艺和新材料及其系统的研究开发所订立的合同,技术开发合同包括委托开发合同和合作开发合同。

三、计划内项目应填写国务院部委、省、自治区、直辖市、计划单列市、地、市(县)级计划,不属于上述计划的项目此栏划(/)表示。

四、标的技术的内容、形式:

包括开发项目应达到的技术经济指标、开发目的、使用范围及效益情况、成果提交方式及数量。

提交开发成果可采取下列形式:

1.产品设计、工艺规程、材料配方和其他图纸、论文、报告等技术文件;

2.磁盘、磁带、计算机软件;

3.动物或植物新品种、微生物菌种;

4.样品、样机;

5.成套技术设备。

五、研究开发计划:

包括当事人各方实施开发项目的阶段进度,各个阶段要解决的技术问题,达到的目标和完成的期限等。

六、技术情报和资料的保密:

包括当事人各方情报和资料保密义务的内容、期限和泄漏技术秘密应承担的责任。

双方可以约定,不论本合同是否变更、解除、终止,本条款均有效。

七、其它:

合同如果是通过中介机构介绍签订的,应将中介合同作为本合同的附件。如果双方当事人约定定金财产抵押及担保的,应将给付定金、财产抵押及担保手续的复印件作为本合同的附件。

八、委托代理人签订本合同书时,应出具委托证书。

九、本合同书中,凡是当事人约定认为无需填写的条款,在该条款填写的空白处划(/)表示。

依据《中华人民共和国技术合同法》的规定,合同双方就_____________项目的技术开发(该项目属 计划※),经协商一致,签订本合同。

一、※标的技术的内容、形式和要求:

二、应达到的技术指标和参数:

三、※研究开发计划:

四、研究开发经费、报酬及其支付或结算方式:

(一)研究开发经费是指完成本项研究开发工作所需的成本;报酬是指本项目开发成果的使用费和研究开发人员的科研补贴。

本项目研究开发经费及报酬: 元

其中:甲方提供 元,乙方提供 元。

如开发成本实报实销,双方约定如下:

(二)经费和报酬支付方式及时限(采用以下第 种方式):

①一次总付: 元,时间:

②分期支付: 元,时间:

元,时间:

③按利润 %提成,期限:

④按销售额 %提成,期限:

⑤其它方式:

五、利用研究开发经费购置的设备、器材、资料的财产权属:

六、履行的期限、地点和方式:

本合同自 年 月 日至 年 月 日在

(地点)履行。

本合同的履行方式:

七、※技术情报和资料的保密:

八、技术协作和技术指导的内容:

九、风险责任的承担:

在履行本合同的过程中,确因在现有水平和条件下难以克服的技术困难,导致研究开发部分或全部失败所造成的损失,风险责任由 承担。

(1.乙方;2.双方;3.双方另行商定)

经约定,风险责任甲方承担 %

乙方承担 %

本项目风险责任确认的方式为:

十、技术成果的归属和分享:

(一)专利申请权:

(二)非专利技术成果的使用权、转让权:

十一、验收的标准和方式:

研究开发所完成的技术成果,达到了本合同第二条所列技术指标,按 标准,采用 方式验收,由 方出具技术项目验收证明。

十二、违约金或者损失赔偿额的计算方法:

违反本合同约定,违约方应当按技术术合同法第二十九条、第三十一条和技术合同法实施条例第四十二条,第四十三条规定承担违约责任。

(一)违反本合同第 条约定, 方应当承担违约责任,承担方式和违约金额如下:

(二)违反本合同第 条约定, 方应当承担违约责任,承担方式和违约金额如下:

(三)

十三、争议的解决办法:

在本合同履行过程发生争议,双方应当协商解决,也可以请求 进行调解。

双方不愿协商、调解解决或者协商、调解不成的,双方商定,采用以下第 种方式解决。

(一)因本合同所发生的任何争议,申请 仲裁委员会仲裁;

(二)按司法程序解决。

十四、名词和术语的解释:

十五、※其它(含中介方的权利、义务、服务费及其支付方式、定金、财产抵押、担保等上述条款未尽事宜):①

┌─┬──────┬─────────────────────────┐

│ │名称(或姓名)│ (签章) │

│ ├──────┼─────┬─────────────┬─────┤

│ │法定代表人 │(签章) │ 委托代理人 │(签章) │

│ ├──────┼─────┴─────────────┴─────┤

│委│ 联系人 │ (签章) │

│托├──────┼─────────────────────────┤

│方│ 住所 │ │

│ │(通讯地址)│ │

│甲├──────┼─────────────┬────┬──────┤

│ │ 电话 │ │电挂 │ │

│方├──────┼─────────────┴────┴──────┤

│ │开户银行 │ │

│ ├──────┼─────────────┬────┬──────┤

│ │ 帐号 │ │邮政编码│ │

├─┼──────┼─────────────┴────┴──────┤

│ │名称(或姓名)│ (签章) │

│ ├──────┼─────┬─────────────┬─────┤

│ │法定代表人 │(签章) │ 委托代理人 │(签章) │

│研├──────┼─────┴─────────────┴─────┤

│究│联系人 │ (签章) │

│开├──────┼─────────────────────────┤

│发│ 住所 │ │

│方│(通讯地址) │ │

│乙├──────┼─────────────┬────┬──────┤

│方│ 电话 │ │电挂 │ │

│ ├──────┼─────────────┴────┴──────┤

│ │开户银行 │ │

│ ├──────┼─────────────┬────┬──────┤

│ │ 帐号 │ │邮政编码│ │

├─┼──────┼─────────────┴────┴──────┤

│ │单位名称 │ (公章) 年 月 日 │

│中├──────┼────┬───────────────┬────┤

│ │法定代理人 │(签章)│ 委托代理人 │( 签章) │

│ ├──────┼────┴───────────────┴────┤

│ │联系人 │ (签章) │

│介├──────┼─────────────────────────┤

│ │住 所 │ │

│ │(通讯地址) │ │

│ ├──────┼──────────────┬────┬─────┤

│ │ 电话 │ │电话 │ │

│方├──────┼──────────────┴────┴─────┤

│ │开户银行 │ │

│ ├──────┼──────────────┬────┬─────┤

│ │ 帐号 │ │邮政编码│ │

└─┴──────┴──────────────┴────┴─────┘

印花税票粘贴处

────────

┌──────────────────────────────────┐

│登记机关审查登记栏: │

│ │

│ 技术合同登记机关(专用章) │

│ 经办人 (签章) 年 月 日 │

└──────────────────────────────────┘

注:①本合同书标有※号的条款按填写说明填写。

出口销售合同范文

编 号(No.) ：_____________

签约地点(Signed at) ：________

日 期(Date) ：_____________

卖方(Seller) ：________________________

地址(Address) ：_______________________

电话(Tel) ：__________传真(Fax) ：__________

电子邮箱(E-mail) ：_____________________

买方(Buyer) ： ______________________

地址(Address) ： ______________________

电话(Tel) ：：_________传真(Fax) ：_____________

电子邮箱(E-mail) ： ______________________

买卖双方经协商同意按下列条款成交：

The undersigned Seller and Buyer have agreed to close the following transactions according to the terms and conditions set forth as below：

1. 货物名称、规格和质量 (Name， Specifications and Quality of Commodity)：

2. 数量(Quantity)：

3. 单价及价格条款 (Unit Price and Terms of Delivery) ：

(除非另有规定，“FOB”、“CFR”和“ CIF”均应依照国际商会制定的《20xx年国际贸易术语解释通则》(INCOTERMS 20xx)办理，

出口销售合同。) The terms FOB，CFR，or CIF shall be subject to the International Rules for the Interpretation of Trade Terms (INCOTERMS 20xx) provided by International Chamber of Commerce (ICC) unless otherwise stipulated herein.)

4. 总价 (Total Amount)：

5. 允许溢短装(More or Less)： ___%.

6. 装运期限(Time of Shipment)：

收到可以转船及分批装运之信用证___天内装运。

Within _____ days after receipt of L/C allowing transhipment and partial shipment.

7. 付款条件(Terms of Payment)：

买方须于____ 前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后_____天在中国到期，并必 须注明允许分批装运和转船。

By Confirmed， Irrevocable， Transferable and Divisible L/C to be available by sight draft to reach the Seller before ______ and to remain valid for negotiation in China until ______after the Time of Shipment. The L/C must specify that transshipment and partial shipments are allowed.

买方未在规定的时间内开出信用证，卖方有权发出通知取消本合同，或接受 买方对本合同未执行的全部或部份，或对因此遭受的损失提出索赔。

The Buyer shall establish a Letter of Credit before the above-stipulated time， failing which， the Seller shall have the right to rescind this Contract upon the arrival of the notice at Buyer or to accept whole or part of this Contract non fulfilled by the Buyer， or to lodge a claim for the direct losses sustained， if any.

8. 包装(Packing)：

9. 保险(Insurance)：

按发票金额的___%投保_____险，由____负责投保。

Covering _____ Risks for______110% of Invoice Value to be effected by the ____________.

10. 品质/数量异议 (Quality/Quantity discrepancy)：

如买方提出索赔，凡属品质异议须于货到目的口岸之日起30天内提出，凡属 数量异议须于货到目的口岸之日起15天内提出，对所装货物所提任何异议于保险 公司、轮船公司、其他有关运输机构或邮递机构所负责者，卖方不负任何责任，

In case of quality discrepancy， claim should be filed by the Buyer within 30 days after the arrival of the goods at port of destination， while for quantity discrepancy， claim should be filed by the Buyer within 15 days after the arrival of the goods at port of destination. It is understood that the Seller shall not be liable for any discrepancy of the goods shipped due to causes for which the Insurance Company， Shipping Company， other Transportation Organization /or Post Office are liable.

11. 由于发生人力不可抗拒的原因，致使本合约不能履行，部分或全部商品 延误交货，卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不 能克服的客观情况。

The Seller shall not be held responsible for failure or delay in delivery of the entire lot or a portion of the goods under this Sales Contract in consequence of any Force Majeure incidents which might occur. Force Majeure as referred to in this contract means unforeseeable， unavoidable and insurmountable objective conditions.

12. 仲裁(Arbitration)：

因凡本合同引起的或与本合同有关的任何争议，如果协商不能解决，应提 交中国国际经济贸易仲裁委员会深圳分会。按照申请仲裁时该会当时施行的仲裁 规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。

Any dispute arising from or in connection with the Sales Contract shall be settled through friendly negotiation. In case no settlement can be reached， the dispute shall then be submitted to China International Economic and Trade Arbitration Commission (CIETAC) ，Shenzhe Commission for arbitration in accordance with its rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties.

13. 通知(Notices)：

所有通知用___文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后___日内书面通知另一方。

All notice shall be written in _____ and served to both parties by fax/e-mail /courier according to the following addresses. If any changes of the addresses occur， one party shall inform the other party of the change of address within ____ days after the change.

14. 本合同为中英文两种文本，两种文本具有同等效力。本合同一式 _____ 份。自双方签字(盖章)之日起生效。

This Contract is executed in two counterparts each in Chinese and English， each of which shall be deemed equally authentic. This Contract is in _____ copies effective since being signed/sealed by both parties.

The Seller： The Buyer：

卖方签字： 买方签字：

甲方：

法定代表人：

地址：

电话：

邮箱：

乙方：

地址：

电话：

邮箱：

因乙方现为甲方提供游戏开发服务，已经（或将要）知悉甲方的商业秘密。为了明确乙方的保密义务，有效保护甲方的商业秘密，防止该商业秘密被公开披露或以任何形式泄漏，根据《_____》、《中华人民共和国反不正当竞争法》、《中华人民共和国_____》及_____有关部委的规定，甲、乙双方本着平等、自愿、公平和诚实信用的原则签订本保密协议。

一、商业秘密

1、本协议所称商业秘密包括：技术信息、专有技术、经营信息和甲方公司中列为绝密、机密级的各项文件。乙方对此商业秘密承担保密义务。本协议之签订可认为甲方已对公司的商业秘密采取了合理的保密措施。

2、技术信息指甲方拥有或获得的一切技术信息，包括但是不限于有关开发和产品销售的技术方案、软件开发设计文档、软件源代码、软件加密算法、软件加密器材、数据库、实验结果、技术数据、以及其它技术文档、涉及商业秘密的业务函电等一切有关的信息。

3、专有技术指甲方拥有的有关生产和产品销售的技术知识、信息、技术资料、制作工艺、制作方法、经验、方法或其组合，并且未在任何地方公开过其完整形式的、未作为工业产权来保护的其他技术。

4、经营信息指有关商业活动的市场行销策略、货源情报、定价政策、不公开的财务资料、合同、交易相对人资料、客户名单等销售和经营信息。

5、甲方依照法律规定（如在缔约过程中知悉其他相对人的商业秘密）和在有关协议的约定（如技术合同）中对外承担保密义务的事项，也属本保密协议所称的商业秘密。

6、乙方主张由其本人享有知识产权的，应当及时向甲方申明。经甲方核实，由乙方享有知识产权，甲方不得在未经乙方明确授权的前提下利用这些成果进行生产、经营，亦不得自由向第三方转让。

二、保密义务人

1、乙方为本协议所称的保密义务人。保密义务人是指为甲方提供相关服务而知悉甲方商业秘密，并且在甲方领取报酬或工资的人员。

2、甲方向保密义务人支付的报酬或工资中已包含保密费，此处不再重复支付。

3、保密义务人同意为甲方公司利益尽最佳努力，在履行职务期间不组织、参加或计划组织、参加任何竞争企业，或从事任何不正当使用公司商业秘密的行为。

三、保密义务人的保密义务

1、保密义务人对其因身份、职务、职业或技术关系而知悉的公司商业秘密应严格保守，保证不被披露或使用，包括意外或过失。即使这些信息甚至可能是全部地由保密义务人本人因工作而构思或取得的。

2、在服务关系存续期间，乙方未经甲方许可，不得以竞争为目的、或出于私利、或为第三人谋利、或为故意加害于公司，擅自披露、使用商业秘密、制造再现商业秘密的器材、取走与商业秘密有关的物件；不得刺探与本职工作或本身业务无关的商业秘密；不得直接或间接地向公司内部、外部的无关人员泄露；不得向不承担保密义务的任何第三人披露甲方的商业秘密；不得允许（出借、赠与、出租、转让等处分甲方商业秘密的行为皆属于“允许”）或协助不承担保密义务的任何第三人使用甲方的商业秘密；不得复制或公开包含公司商业秘密的文件或文件副本；对因工作所保管、接触的有关本公司或公司客户的文件应妥善对待，未经许可不得超出工作范围使用。

3、如果发现商业秘密被泄露或者自己过失泄露商业秘密，应当采取有效措施防止泄密进一步扩大，并及时向甲方报告。

4、服务关系结束后，公司保密义务人应将与工作有关的技术资料、源代码、工作相关工具、客户名单等交还公司。

5、鉴于保密义务人在职期间，获得或制作的商业秘密（包括技术秘密和经营秘密）对公司在竞争中的巨大价值，在劳动合同关系存续期间和终止之后，保密义务人均承认公司因投资、支付劳动报酬而对这些商业秘密的所有权，因此保密义务人同意甲方按下列方式执行：

（1）保密义务人因各种原因离开公司，自离开公司之日起____年内不得自营或为公司的竞争者提供服务，不得从事与其在公司生产、研究、开发、经营、销售有关的相关工作（包括受雇他人或自行从事），并对其所获取的商业秘密严加保守，不得以任何理由或借口予以泄露。甲方按《中华人民共和国_____》的规定向乙方支付补偿金。

（2）乙方应提前____个月向甲方提出解除劳动合同的申请。在此期间，甲方有权调动乙方的劳动岗位。乙方如违反本项规定的，应承担本协议规定的违约责任。

四、保密义务的终止

1、公司授权同意披露或使用商业秘密。

2、有关的信息、技术等已进入公共领域。

3、乙方是否在职、劳动合同是否履行完毕，均不影响其保密义务的承担。

五、违约责任

1、保密义务人违反协议中的保密义务，应承担违约责任，如有违约行为须向甲方支付违约金_________元（人民币大写____________）。

2、乙方如将商业秘密泄露给第三人或使用商业秘密使公司遭受损失的，乙方应对甲方进行赔偿，其赔偿数额不少于由于其违反义务所给甲方带来的损失。

3、前款所述损失赔偿按照如下方式计算：

（1）损失赔偿为甲方因乙方的违约或侵权行为所受到的实际经济损失，计算方法是：因乙方的违约及侵权行为导致甲方的产品销售数量下降，其销售数量减少的总数乘以每件产品利润所得之积。

（3）甲方因调查乙方的违约或侵权行为而支付的合理费用，如_____、公证费、取证费等，应当包含在损失赔偿额之内。

（4）因乙方的违约或侵权行为侵犯了甲方的商业秘密权利的，甲方可以选择根据本协议要求乙方承担违约责任，或者根据国家有关法律、法规要求乙方承担侵权责任。

4、因乙方恶意泄露商业秘密给公司造成严重后果的，公司将通过法律手段追究其侵权责任，直至追究其刑事责任。

六、争议的解决方法

因执行本协议而发生纠纷的，可以由双方协商解决或共同委托双方信任的第三方调解。协商、调解不成，或者一方不愿意协商、调解的，将提交_______________委员会_____。

七、其他

1、在签署本协议前，双方已经详细审阅了协议的内容，并完全了解协议各条款的法律含义。

2、本协议自双方签字或盖章后生效。

3、本协议的任何修改必须经过双方的书面同意。

4、本协议壹式两份，甲乙双方各执壹份。

甲方（盖章）：

法定代表人（签字）：

签约日期：_________年_________月_________日

乙方（签字）：

签约日期：_________年_________月_________日

中国深圳对外贸易货物进口合同

（6）insurance policy / certificate in_________copies .

（7）certificate of origin in _________ copies issued by_________.

（8）hipping advice：_________

in addition ， the sellers shall， within _________ hours after shipment effected ， send each copy of the above-mentioned documents no. _________directly to the buyers by courier service.

13、shipment

fob

the sellers shall ， 30 days before the shipment date specified in the contract advise the buyers by cable / telex /fax of the contract no. ， commodity ， quantity ， amount ， packages ， gross weight ， measurement ， and the date of shipment in order that the buyers can charter a vessel / book shipping space . in the event of the sellers failure to effect loading when the vessel arrives duly at the loading port ， all expenses including dead freight and / or demurrage charges thus incurred shall be for sellers account.

cif或cfr

the sellers shall ship the goods duly within the shipping duration from the port of shipment to the port of destination . under cfr terms ， the sellers shall advise the buyers by cable/fax/telex of the contract no. ， commodity ， invoice value and the date of despatch two days before the shipment for the buyers to arrange insurance in time.

ddu

the sellers shall ship the goods duly within the shipping duration from the port of the port of destination.

_________

14、hipping advice ：

the sellers shall immediately upon the completion of the loading of the goods ， advise buyers of the contract no.， names of commodity ， loading quantity ， invoice values ， gross weight ， name of vessel and shipment date by tlx/fax/cable within_________hours .

15、quality guarantee ：

the sellers shall guarantee that the commodity must be in conformity with the quality and specifications specified in this contract and letter of quality guarantee .the guarantee period shall be_________ months after the arrival of the goods at the port of destination ， and during the period the sellers shall be responsible for the damage due to the defects in designing and manufacturing of the manufacturer.

16、goods inspection ：

the sellers shall have the goods inspected by _________inspection authority _________ days before the shipment and issued the inspection certificate . the buyers shall have the goods reinspected by $$$inspection authority after the goods arrival at the destination.

17、claims：

the buyers shall lodge claims against the sellers based on the inspection certificate issued by china _________ inspection authority _________ days after the arrival of the goods at the destination ， if the goods are found to be damaged ， missing or the specifications ， quantity， and quality not in conformity with those specified in this contract and letter of quality guarantee . in case the claim period above specified is not in conformity with the quality guarantee period， during the quality guarantee period， the buyers have rights to lodge claims against the sellers concerning the quality guarantee.

共6页，当前第5页123456

卖方：____________买方：____________

地址：____________地址：____________

邮编：____________邮编：____________

电话：____________电话：____________

传真：____________传真：____________

E-mail：____________E-mail：____________

买卖双方本着公平、自愿、互惠互利的原则，根据《中华人民共和国民法典》，经协商一致签订本合同。此合同经买卖双方共同制订，买方愿意购入、卖方愿意售出下述进口货物，谨此签约。

1.本合同项下的合同金额、交货地点(即交货港口)、交货期限(即交货时间)以及货物品种、数量、单价、包装等内容见《新连锁商品进口供货清单》(见附件1，简称《供货清单》)，为本合同不可分割部分，买方签字后生效)。

2.包装：

卖方应对本合同所售货物进行适当完全的包装，以适于长距离的远洋或内陆运输，能够很好地保护货物，防止潮湿、湿气、震动、生锈、粗暴处理。

3.装运标志：

卖方须在每个运输包装物上标明本合同的合同编号，并标出包装号码、体积、毛重、净重，以及“本面向上”、“小心轻放”、“切勿受潮”等装运标志。

4.供货履约担保：

(1)中国XX公司(即担保人)提供的以本合同为主合同的“供货履约担保”，买方与卖方签订本合同之日同时与卖方、担保人签订《新连锁商品进口交易履约供货担保条款》(见附件2)，并由担保人通过买方当地国家XX局储汇局下属的业务服务网点(简称订购代办营业机构)向买方转交由担保人出具的《新连锁商品进口交易履约供货担保承保通知单》(见附件3，简称《供货担保承保通知单》)。

(2)买方支付的货款由____________订购代办营业机构代收后汇入担保人和卖方指定的账户，3个工作日内卖方委托担保人向买方开具《新连锁商品进口交易履约供货担保单》(见附件4，简称《供货担保单》)，该担保单以传真和邮寄方式由担保人送达给买方。

(3)买方若因贸易融资原因需要将基于本合同项下的由担保人向买方出具的《供货担保单》项下的《供货清单》中的赔款款项转让给他人，买方在向卖方提交本合同时，须以书面方式向卖方和担保人提交申请书并由卖方和担保人进行确认，申请书应注明该赔款款项受让人的详细资料，包括：公司全称、通讯地址、电话、传真、开户名称、开户行、账号。

5.商品检测及货物交割：

(1)买卖双方指定境外卖方所在国(地区)当地的瑞士____________集团下属营业机构(简称____________)对上述货物进行品种和数量检测，并由其出具品种和数量检测报告。

____________中国营业机构联系方式如下：

(2)双方确认上述货物的承运人为中____________公司(简称承运人)，买方承担从境外卖方装运港将货物运至买方指定目的港的运费、保险费。

承运人联系方式如下：

(3)卖方备妥上述货物后，卖方须在不迟于每批货物交货期限前10日以传真方式向买方提交____________出具的检测报告及《新连锁进口商品检测报告通知单及回执》(见附件5，简称《检测报告通知单》)由买方确认。

(4)如买方对卖方以传真方式提交出具的品种和数量的检测报告内容无异议，须在收到卖方《检测报告通知单》传真件24小时之内，向卖方传真签章后的《检测报告通知单》和《装运通知单》(见附件6);如买方对检测报告的内容有异议，须在收到卖方《检测报告通知单》传真件24小时之内，向卖方传真签章后的《检测报告通知单》，按本合同“7.违约处理”规定处理。

(5)买卖双方以承运人签发的提单上载明的交货时间和装运地点为货物实际交货时间和交货地点，该实际交货时间应在本合同规定的最迟一批货物交货期限内;如因买方或承运人的原因造成交货时间或交货地点的变化，买方应以书面方式通知卖方变更后的货物交货时间和交货地点。

(6)因为买方没有在规定期限内给予卖方《装运通知单》或者因为上述(5)中买方或承运人的原因，造成交货延迟，卖方均不承担违约责任。

(7)如买方所购商品需要国家有关部门进口批文和许可证，卖方可协助买方办理，所需费用由买方承担。

(8)买卖双方同意由承运人为买方提供国际运输、进口报关报检(中国商检机构规定的进口商检)、国内配送的全程物流服务;进口所需费用(包括国际运费、保险费、报关、商检、国内运费等费用)由买方承担，具体支付方式由买方与承运人另行商定。

(9)货物进口关税及增值税应由买方在接到卖方书面通知后向卖方支付，卖方在货物完成进口通关后按实际发生多退少补，并按实际收取的货款、进口关税及增值税的总额向买方提供增值税发票。

(10)如买方没有按承运人及卖方的要求交纳上述货物进口所需费用、进口关税及增值税，视为买方自动放弃货物，卖方不承担由此产生的任何经济和法律责任。

6.货款支付：

(1)货物总值详见附件1《供货清单》。

(2)自本合同签字之日，买方将《供货清单》项下的100%货款交纳给订购代办营业机构，买方须在交款单上填写《供货清单》编号以及担保人指定的卖方货款账户(见以下(3))后，领取《供货担保承保通知单》。

(3)卖方货款账户

开户行：____________

供货方开户名称：____________

帐号：____________

7.违约处理：如卖方未按本合同中约定的期限、地点、品种或数量向买方供货，买方可以按照《新连锁商品进口交易履约供货担保条款》的规定向卖方和担保人书面提出索赔。

8.质量异议：买方若对所购货物的质量提出异议，应向卖方提交相关索赔文件，包括：索赔书，____________集团下属的____________公司出具的相关商品质量检测报告。

9.退货：卖方如要求退回有异议部分货物并承担相关费用，买方须委托中____________公司将该部分货物运至卖方指定港口。

10.不可抗力：卖方如因洪水等自然灾害、战争、罢工等不可抗力原因不能按期交货或不能交货时，经双方协商本合同可以延迟履行;如双方决定终止执行本合同，卖方须在交货期限后15日内全额退回买方已支付的货款及利息(期间存款利息按企业活期存款利率计算)。

11.争议：买卖双方在本合同执行过程中如有争议，双方友好协商解决;如争议无法协商解决，则由北京在北京进行仲裁。

12.有效：

(1)本合同自买卖双方签章之日起生效，本合同的附件与本合同不可分割，具备同等法律效力。

(2)如买方支付的货款在本合同签订之日起3个工作日内没有存入____________订购代办营业机构指定的账户，本合同自动失效。

(3)任何对本合同内容的变更，须经买方、卖方和担保人三方共同认可。

附件(略)。

卖方(签章)：____________买方(签章)：____________

日期：____________日期：____________

进口合同(样式一)

8.4 买方检验人员若发现“设备”有缺陷和/或不符合本合同规定的规格时，有权提出意见，卖方应充分考虑并自费采取必要措施排除缺陷，当缺陷排除后，应再次检验和试验，由此引起的费用均由卖方负担。

8.5 买方检验人员在卖方国家和制造厂的检验不代替“设备”运抵买方合同工厂现场的开箱检验，亦不能免除卖方按本合同第十章规定的保证责任。买方人员不签署任何证明文件。

8.6 卖方应免费为买方人员提供方便的工作条件，如必需的技术文件、图纸、检验工具和仪器等。

8.7 如买方不能在本章规定的期限内派出人员参加上述检验工作时，卖方将自行检验。

8.8 卖方供应的全部“设备”的开箱检验应在合同工厂现场进行，卖方有权自费派遣他们的检验人员到合同工厂现场参加此项检验，买方应在检验前一个月将开箱日检验期通知卖方，并为卖方检验人员提供工作的方便。

在双方会同开箱检验中如发现“设备”有短少、缺陷、损坏或包装与本合同规定不符合或质量标准与本合同8.1条和10.1条规定不符时，应作详细记录，并由双方代表签字。如属卖方责任，此记录即为买方向卖方要求换货、修理或补齐的有效证明。

8.9 如不属买方原因，卖方检验人员不能参加开箱检验时，买方有权自行开箱检验。如发现本合同7.8条所述问题系属卖方责任时，应委托中国商品检验局出具证明，以此作为买方向卖方要求换货、修理或补齐的有效证明。

卖方接到买方索赔证书后，应立即无偿换货、补发短缺部分或降低货价，并负担由此产生的到安装现场的换货费用、风险以及买方的检验费用。如卖方对索赔有异议时，应在接到买方索赔证书后两个星期内提出异议，双方另行协商；逾期，索赔即作成立。

卖方换货和/或补交货物的时间，不迟于卖方收到买方索赔证书后＿＿个月。

8.10 在开箱检验中，由于买方的原因，发现“设备”有损坏，通知卖方后，卖方应尽快补发、更换，其费用由买方负担。

8.11 上述检验并不能解除卖方对第九章、第十章所承担的责任。

8.12 在检验中，如发现卖方提供的检验所需的标准仍不完整或提供的不及时，经与卖方协商，买方有权按照买方国家现行标准进行检验。

第九章 安装、试车和验收

9.1 “安装”系指合同工厂全部设备、材料的装配、就位和联接等安装工作。“试车”系指机器和/或设备的单独或联动的试运转。

“投料试生产”系指合同工厂投入原料和公用工程以试生产。

“考核”系指检验本合同附件＿＿所规定的各项保证数值而进行的试验。

“验收”系指如果考核结果表明，本合同附件＿＿所规定的各项保证指标能够全部达到，则合同工厂即为买方所验收。

9.2 合同工厂的安装将在买方负责组织下和在卖方负责技术指导下进行，卖方有权对其进行详细设计有关的所有“设备”的安装以及界区接点的安装进行技术指导。

合同工厂的试车、投料试生产和考核应在买方组织安排下和卖方技术指导下进行。在安装工作开始前二个月，双方各自授权一名代表处理合同工厂从安装到验收期有关合同工厂的全部技术工作。具体工作应由双方代表友好协商安排。双方代表应充分合作，使合同工厂在本合同生效日后＿＿个月内建设完毕。

共17页，当前第10页1234567891011121314151617

暑假结束了，带着不一样的心情将要迈向我的大三生活。回顾刚刚过去的暑假，收获颇多，感触多多……

首先我要做一下自我“检讨”，不得不承认自己缺乏一定“韧”性、耐力。起先在一家食品加工厂车间实习，每天工作十二多个小时，食宿条件都远非想象，再加从未接触过这么多的工作量，工作了两天，我退却了。我可以为自己找到一些很好的理由，但这不能掩盖暴露出来的缺点，不过，即便仅体验了两天，我也从中领悟到一些以前不曾体会到的东西。枯燥无味的机械工作把我弄得身心疲惫，每天工作结束躺在床上，连思考的精力都快没了，进一步体会到生活的艰辛。看到比自己年龄小的小妹妹们为了生计坚持工作，我感激自己拥有的一切，更加怀念在学校学习的生活，真正意识得到那是一种幸福。我告诫自己，要利用好学习的机会，努力发展自己，为将来的腾飞积聚力量。

还好，接着我有幸找到一家机械制造公司，并在商贸部得到一个实习职位，与我的专业很相符，因此，我倍加珍惜这个机会，理论联系实际，想在这里多学习点东西。起先我负责协助管理公司网站、发布产品信息，对产品稍作了解后，开始熟悉外贸流程。由于实习时间较短，不能充分了解产品，只能学习一下外贸方面的大概知识。不过，这与只学习理论知识是完全不一样的体会，毕竟很多东西是无法从书本中学到的，亲身体验，感受是不一样的。从寻找客户到洽谈，到合同以及备货、后续工作，每一个过程都有细节，都有技巧。像寻找客户，也是贸易的基础，不能漫无目的地寻找、大海捞针地碰运气，而要找有意向购求自己产品的客户。这里，我学会了用网络商务平台与客户接触，只有这样，才能更快、更有成效地找到自己的客户;再者，开发客户需要有耐心，这是我从老职工那里学到的，用他的话说要“厚脸皮”、“穷追不舍”，遗憾的是，时间太短，没法进车间细致了解产品，也就不好向客户介绍，尤其是涉及到机械的专业知识，我更是一窍不通。从这一点也可看出，以后对从事的工作要先进行了解，最好进入自己略知一二的行业。现在的外贸与以往略有不同，互联网的普遍应用和发展，便捷了对外贸易活动，电子商务已成为一种普遍的趋势，进而催生一股在家工作的新潮流。但是我觉得最重要的还是对产品的充分了解，唯有如此，回复客户询盘时才能得心应手，不至于让对方感觉自己是行外人，因为大多客户都愿意与专业人士做生意。因此，这也可看作是做外贸的基础。还有就是当国外客户到本部参观时，很多中小企业不另聘翻译人员，这时，外贸业务员就要做好两者的沟通桥梁，既要把本公司的产品优势推荐给外国客户，又要把客户的建设性、改善性意见传播给本部，特别是技术人员，以便日后对产品的改进。时间较短，对单据方面接触的不是太多，日后的课程学习中我会更加用心。

其实，不管从事什么行业，就职于那个公司，最基础的都相同。在这里，我学到的一些业务之外的知识将使我受益匪浅，对于以后的工作大有裨益。在一个办公室里工作，工作环境很重要，这就要求尽力营造和谐的氛围，学会沟通、交流，这确实是一门学问。其次，工作中要勤快一些，特别是作为后生，要多做一些事情，诸如打扫卫生、打水等杂务。既养成好习惯，也赢得了别人的好评，这让我想起一句俗语“吃亏是福”。我们一直强调活到老、学到老，经过这段时间的实习，我发现自己需要学习的东西确实太多了，刚进公司我就提醒自己，要利用好这个机会多学习学习，不懂就要问。其实，好问多问并不丢人，相反不懂装懂才是真傻，当然，问问题也并不是什么都问，一些能自己解决的最好还是靠自己，还有一点就是很重要的问题要记下来，不要下次遇到再反复问，那不是好问而是不用心学习。总之，在社会、在公司不要把自己太“当回事”，要低调做人、高调做事。只有俯下身子、贴身实际，才能看得更清、学得更多、做得更好。因为每一个人都有值得学习的地方，每一方面都值得学习，更何况涉世未深的我们。以后的工作、生活，光凭书本上的知识是万万不够的，生活处处皆学问，用心工作、用心生活，才能做得更好。

还有一点就是对待工作、生活要有激情，做外贸可能还好些，工作有时就是枯燥无味，并且这种情绪很容易感染。其实关键还是在于心态，改变不了工作环境，可以改善自己心境。努力为自己的生活增添点乐趣，所以，工作之余听听音乐、散散步也是有道理的。

这次社会实践的体会就先写这么多，相信：用心做事才能把事情做好。“输入”越多，“输出”的才更有分量!