当兵英文翻译热门20篇

1, familiar with the sales process and store the terminal daily maintenance and management, good customer development and maintenance.

2, three years of work experience in architectural design and sales experience as well as learning more than one year of university structures, let me in communication with the construction side and after-sale technical support for many more advantages.

3, in addition to daily sales work, I can skillfully use Photoshop software and cad drawing, and the production of the overall program mix.

4, very much hope that engaged in real estate sales.

I became the companys trial employees in the year 20xx, the next month that trial period expires positive, the work of this period of time, led by the company under the leadership of colleagues with their help in their work, study and other aspects Have achieved good results, will now own a few months of work, learning to do about the summary,

As a new employee, the first to the company, have been very worried about how I do not know how to coexist, how to do a good job; but the company relaxed and harmonious working atmosphere, united and progressive corporate culture, so I quickly completed from students to staff change.

In the rotation internship, I have in the manufacturing department workshop visit nearly a month time. The various positions and production processes in the shop are all I have never had before, and my expertise is also a big difference; but the leadership of various departments and colleagues, patient guidance, so I am in a short period of time familiar with the production sector as a whole Operation process, the companys products and production positions with a better understanding.

In the work of this department, I have been strict demands on themselves, in a timely manner to do a good job in the leadership layout of each task, and take the initiative to share the worry for the leadership; professional and non-professional issues do not understand the humbly ask colleagues to learn and constantly improve themselves , In its place, to seek their jobs, do their best. Of course, the beginning of the workplace, inevitably there are some small difference between the small and the wrong to lead the correction; but the lesson of the matter, the funeral of the division, these experiences make me continue to mature, in dealing with various issues to consider more comprehensive, to prevent similar mistakes happened. Here, I would like to specifically thank the leadership of the department and my colleagues for my induction guide and help, for their work in my omission and inadequate reminder and inadequate correction, especially in the departure procedures for vouchers, personnel table optimization, the Class document number filing electronic filing and other aspects of the recommendations and guidance, but also urged me to have the time required for personnel positions in the careful thought and sense of responsibility

After six months, I have been able to independently deal with the basic staff procedures such as induction, transfer, transfer, transfer, contract renewal, reward and punishment, separation and so on, organize the filing of employee contracts, assist in providing employee insurance documents andList, processing daily employee documentation reimbursement, and assisting in the provision of personnel-related information and data required by the various departments of the company Staff self-evaluation Self-evaluation Self-evaluation. In the past two months to participate in the colleges and universities in the 20xx campus recruitment, learn and refer to the colleagues and leaders in the recruitment interview in the experience and skills, and gradually improve their knowledge in the lack of talent. Of course, I have a lot of problems, to deal with problems in terms of experience to be improved, the department also needs to further enhance the ability to collaborate, need to continue to learn to improve their operational capacity.

This is my first job, which I learned a lot of the past six months, sentiment a lot; see the rapid development of the company, I am deeply proud and proud, and more urgent hope to a formal staff identity Work here, to achieve their goals, reflect their value in life, and the company grow together. Here I put forward, ask the leadership to give me to continue to exercise their own, to achieve the ideal opportunity. I will use modest attitude and full of enthusiasm to do my own work, create value for the company, with the company to look forward to a better future!

Has a strong user research, market analysis, the Chinese users of social form, way of life has a wealth of understanding and unique views on the color, material feel delicate and sensitive, with color, material, surface treatment research and trend analysis Ability to understand the color of contemporary China has a deep understanding and their own point of view; be able to accurately grasp the social culture, fashion trends, the Chinese modern society and traditional cultural backgrounds have a careful study and profound understanding of the design work is full of enthusiasm, Strong design capability, design a wide range of products.

Familiar with all kinds of office software and PS, CORELDRAW, CAD, 3dmax, and so on. We have a lot of experience in the design field, such as design, pottery, painting, cartoon, etc. , Maya and other professional painting tools, a strong learning and hands-on ability; a strong plane three-dimensional thinking, a strong three-dimensional sense of consciousness, color-sensitive to strong control; design style changeable, innovative, creative Innovation ability; and have good oral communication skills, can adapt to foreign travel.

个人的英文年终工作总结范文

The end of the year is often a time of many events -- wrapping up business for the year while also wrapping holiday presents. This article presents something you can give to yourself -- something that you can get done during the holiday lull or over some vacation days -- a quick and easy process for examining what youve accomplished in your career this year and where you want to go with it next year.

Of course, you may have already done at least some preliminary work on reviewing the year -- especially if your employer hands out year-end bonuses or conducts year-end performance reviews -- and if so, thats a good place to start your year-end review.

But unlike your on-the-job performance review, the purpose of this article is to suggest you consider conducting an even more important assessment -- taking stock of your career. Now is the perfect time to review where you are, where youve been, and where you want to go.

Before you begin your assessment, take a moment to ask yourself the most important question: Am I happy and fulfilled by my job and career? No matter how successful youve been in the past 11 months, if you are fundamentally unhappy with your work, spend the vast majority of

Dont rush your review. Consider using a weekend or one or more of your vacation days to reflect on your career. You dont need to -- and probably shouldnt -- complete all six steps in one sitting. Break it up over several days if you like.

Step One: Review Career Goals. Did you set any goals for your career this year -- formally or informally? Most people have some idea of what they want to accomplish next in their careers, such as getting a promotion and/or raise or perhaps achieving better work/life balance. Setting some goals is an important activity because goals help provide the focus you need to move your career forward -- and to avoid distractions or activities that may slow your career progress (or worse, devalue you). So, if you had any goals for this year, answer these questions:

* Did I achieve my career goals?

* Am I satisfied with what I did relative to my goals?

* Did anything happen to change my goals over the course of the year?

* How should I modify my goals for next year?

Step Two: Review Your Career Year. What have you done this year? This step is about documenting your career progression and identifying key achievements. Thinking about all youve done over the past 11 months or so, ask yourself these questions:

* What have I accomplished?

* What new skills have I acquired?

* What have I learned?

* What opportunities were gained and lost?

* How am I better today than I was at the beginning of the year?

Step Three: Develop Your Career Synopsis. Where are you in your career? Review all aspects of your career and examine where you stand at this juncture. Some questions to ask yourself:

* Am I where I should be in my career?

* What has helped or hindered my progression?

* Am I happy with my current employer?

* What are my strengths and weakness?

Step Four: Envision Your Future. Whats your next career step? Take some time to plan for next year (and perhaps beyond), picturing the path you want your career to take. Again, here are some questions to help you:

* What do I want to be doing more of in my career?

* What do I want to be doing less of in my career?

* Whats the next step in my career?

* When should I be taking this next step?

* Whats my ideal/ultimate career dream?

Step Five: Action Steps for Your Future. How will you get to that future career? Make a list of what you need to do -- career goals for the coming year -- to get to where you want to be next in your career. These might be things such as building your network, gaining additional experiences, changing employers, strengthening your career brand, or pursuing additional training/education/certifications. Questions to ask yourself:

* What do I need to prepare myself for this next step?

* Do I need to find a new employer to make the next step?

* How do I position myself for this next step?

Step Six: Share Your Career Vision. Are your career goals and action plans feasible? Schedule a meeting with your mentors and to get reactions to your plan, as well as advice for achieving it.

Final Thoughts

Once youve completed these six steps, you should not only know yourself and your career better, but have some specific goals and action steps to help you progress along a career plan.

Another benefit from completing this year-end review is that the results from part of the analysis should assist you in updating your resume if you have not been keeping it current as the year progressed. Even if you are extremely happy with your employer, it makes sense to have a current resume for that once-in-a-lifetime opportunity, or worse, if your employer decides its time to downsize the workforce.

As an accountant, in all aspects of business are careful about, patience, enthusiasm. Since the work, due to their continuous efforts, in all respects have made great progress. Work is also a successful completion, and now the individual identification is as follows:

First, have good work skills

Cashier external units more settlement, is an image window; internal is a service window, internal staff reimbursement is frequent, is a masters. So I have to do is not confused, tickets on the spot error-free, inventory cash fast and accurate, not only to grasp the financial policy, dry up the work also handy, have strong operational capacity, plans, computer, Money everything is accurate, busy and not chaos.

Second, the sense of innovation

In the eyes of many people is a major invention of innovation is what, it is not true, as long as the actual work from the start, to improve the actual work, to promote practical work to a new level, is innovation. I have this spirit. I work for the staff reimbursement of travel expenses reimbursement and the original invoice paste sheet, are made through my reasonable proposals after the improvement of the voucher paper size selection, the original document paste single filling format, the original paste single Requirements of the content design, font layout requirements, the back of the original paste paste the attention of managers, not only to improve the work, more importantly, is to put the accounting file binding and management.

Third, there is a responsible attitude

1, the strict implementation of cash management and settlement system, regular checks to the accounting cash and accounts and found that the amount of cash does not match, so that timely treatment.

2, the timely recovery of the companys income, out of receipts, cash withdrawals in time to the bank, never sit cash.

3, according to the basis for providing accounting, teaching staff wages and other timely payment of funds to be paid. I am hard working, willing to endure hardship, willing to sacrifice. This year, due to the overall relocation and standardization of the basis of accounting rectification work, the intensity and difficulty of financial work has increased. In addition to complete the reimbursement work, I also take care of Coreys back office work and other business. In order to complete the task according to the quality and quantity, I do not care about personal gains and losses, not pay, sacrifice personal interests, often work overtime. In work to develop willing to endure hardship, willing to sacrifice the spirit of the work can always be hard working, conscientious. In the completion of the task of reimbursement, taking into account the back office, do a good job budget, the management of labor camp deposits, excellent work to complete the task, played a role in advanced and role models.

Hello,everyone! My name is , ⅹ years old .is the student of grade 5 class 2. I learn outstanding achievement, the vice Presidents class.

I like English so my English is very good.I also like playing badminton, because it can exercise. I like to eat fruit, because there are nutritious.Thanks!

good morning, dear professors:

it’s my honor to introduce myself. my name is , i am from county province, december i was born in a poor family, and my parents are farmers, i love and respect them very much. we were delight with my becoming a fresh man in september 1997. luckily, i was permitted to be a graduate student after 4 years colorful life on campus. i received my bachelor degree 20xx in institute of science and technology, then a master degree 20xx in university of science and technology. for those 7 years my major was die design. before i received my master degree, i had done the subject of . for the past 3 years, i have been in college, where i have been and still am a teacher. i teach students machine design etc. i have published more than 10 first-author papers.

that’s all, thanks!

As an international trade specialized student, i know the importance of english in english learning, so i have been high-standard requirements themselves. through their own efforts, to passed cet band 4 and again to points passed cet6. in spoken english i have been in the exercise myself, and reached a certain level. in addition, i also laid a japanese primary basic. not only in english, as the rest of course also study hard. in six semester four times won the scholarship, and once passed the national computer rank examination (level 2).

Moreover i took an active part in social practice activities, and to exercise their professional skills, increase their professional knowledge, and has achieved good results. through a series of stratified activities, i also gradually grasp the people contacts and communication skills, learning how to make ourselves in a harmonious interpersonal relationships. through studies i deeply realize the theory instruction practice meaning, and really in the code yourself. in learning and activities of remaining i also actively enrich himself, reading, rich knowledge, and grasped certain of the computer application skills enough to handle the job requirement.

Believe after three years study the lives of hone, already will i hammer become a moral decently, strong-willed, high ideals and soaring aspirations, has the enterprising spirit and team cooperation spirit of excellent college students. believe i have knowledge and competence can completely fit for any difficult work, environment of hard did not prevent completed i finish work. if i am lucky to become a member of your company, i will put all the youth and enthusiasm exert into work, obtain due grades for the development of the company, and contribute their efforts.

dear mr. chamberlaine:

hello!

i am a 04 session of hubei medical college senior students, immediately facing the graduate work is about to embark on, which will have a bearing on my future, so i did a careful selection, your hospital has always been my first employment goals, so i decided to submit this self-recom#mendation and sincere leadership, as the hospital to express their determination! thank you to continue to read my self-recom#mendation !

as before admitted to the universities to determine their own goals in life to be a "white angel" , so do so as soon as i started to learn medical knowledge, the four-year period in school, i not only com#pleted the outstanding achievements the university of courses, but also other medical knowledge often expo, including nursing, pathology, or microbiology, bacteriology, surgery .... in a series of professional medical knowledge, in order to enrich themselves to faster access to social role, i also participated in a school sponsored organizations have served as chairman of the student experience as i set foot on these jobs provided an important experience, i believe i can unite colleague, and leadership, the patient ... live in harmony!

because i am a fresh graduate, i am well aware that their knowledge remains in the realm of theory, which is why i am even more urgent need for your hospital can give me the opportunity to practice, i have to play their professional for patients the most serious medical services, for your contribution to the development of the hospital my light and heat!

June 16, 20xx

Dear Tom,

I just can’t tell you how sorry I was to learn of your accident. Your family tells me that your are progressing nicely, and that you’ll be out of the hospital in about ten days, I’m certainly relieved to know that!

In the next day or so you’ll receive a little package from Margaret and me. I hope you like it, and that it will help to pass the time more pleasantly.

With every good wish for your swift recovery.

Sincerely,

Bob

[译文]

亲爱的汤姆：

知道您受到意外伤害时，我简直难以形容我心中是多么难过。您的家人告诉我，您恢复得很好，再有十天左右的时间就可以出院了。听到这一情况后，我心中感到很宽慰。

在一两天内，您会收到玛格丽特和我寄给您的一小包东西，我希望您喜欢它，并希望它能帮助您更愉快地消遣时光。

衷心祝愿您尽快地恢复健康!

您真诚的

鲍勃

20xx年6月16日

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

.安慰友人考试落榜(To Those Who Could not Pass the Entrance Examination)

June 29, 20__

Dear Bill,

What shocking news to me when I was told by Mr. Lewis that you could not pass the entrance examination. This means you have to wait for another year to attend the next entrance examination. I quite understand how you feel now. Still you have many more chances to try. So I hope that you will not take this to heart, and will get ready to try again. I am sure you will easily succeed next

Yours,

Elizabeth

June 29, 20xx

Dear Bill,

What shocking news to me when I was told by Mr. Lewis that you could not pass the entrance examination. This means you have to wait for another year to attend the next entrance examination. I quite understand how you feel now. Still you have many more chances to try. So I hope that you will not take this to heart, and will get ready to try again. I am sure you will easily succeed next time.

Yours,

Elizabeth

[译文]

亲爱的比尔：

我在刘易斯先生那里获悉你入学考试落榜，深感惋惜。这意味着你要等待明年再考了。我很能理解你目前的心境。但你仍有很多机会，所以希望你别太往心里去，做好下次考试的准备。我深信你明年一定能获得成功。

你的

伊丽莎白

20xx年6月29日

Dear interviewer, Hello, my name is, the law is like a secret weapon in the world is much safer. In the four years of graduate study, I study the constitutional jurisprudence, legal history, Chinese, administrative law and administrative litigation law, civil law, commercial law, intellectual property law, economic law. The criminal law, civil law, criminal law, international law, international law, international economic law, master the basic theory of law and basic knowledge, understand and grasp the main laws and regulations of the state, the spirit of the law and the legal value behind the understanding and grasp of the rule of law, and the use of legal theory, method and thinking of problem analysis, solution the problem.

Book knowledge is limited, I actively participated in many social practice and community work, engaged in a large organization to plan the party, to answer the phone secretarial work, accumulated a lot of experience from success to failure. I think the actual operation ability and organization ability of cooperative learning is more important.

In the usual practice, I learned a lot, especially some books to school work experience, although there have been previous success and failures, from which I get is a lot of work principle and work experience for me now, things have become mature. In the past work, I work conscientiously, have team spirit and good communication skills.

As a graduate, maybe my knowledge is limited, perhaps I was too young, the lack of practical experience, I may not like other people in some areas to work freely, but the young means of enthusiasm and vitality. I dont have much experience, does not mean I can not. Because there is no experience, but more can let me focus on one thing, and not susceptible to outside interference, to maintain their own ideas, maintain their own sense of accomplishment. This will have more power, will be a big harvest. I am confident of their own abilities and learning work in learning and life after graduation to overcome all kinds of difficulties, to realize the value of life with the goal of Standard.

The classmates, teacher Wang, hello!

My name is Cheng Hao, 9 year old, 1.36 meters tall and weighing 30 kg, on the third grade.

I was a lively and cheerful boy, I love sports, running, high jump, long jump, play is my strength, and I also participated in the Taekwondo training, now has a red belt, the coach often praised me a good play, I am also very proud.

I also love to learn not only book knowledge, good master, and often read some books, fairy tales, classical masterpiece, social science, celebrity stories, historical stories. I especially love weapon books, aircraft, tanks, I love the submachine gun. Im ready to learn, invented a super the plane, to defend the country.

I also love painting, music, Sax also played well.

I am hardworking children at home to help my mother do housework, I also recently learned fried egg.

I also love playing with my classmates, all together, I am very happy, I have difficulty who are willing to help. Everyone I am a sensible boy.

班级的英文口号

班级口号不仅代表了班级精神、班级气象，通常还起着激励学生刻苦学习的作用，因此，班级口号越来越普及，不过英文版的班级口号仍然能脱颖而出。下面小编为大家提供了英文版班级口号，欢迎阅读!

1. To conquer self does not concede, college entrance examination field show their skills

战胜自我不服输，高考场上显身手

2. Civilized and polite and diligent, seize every minute to do the best

文明有礼刻苦勤奋，只争朝夕做到最好

3. Learn to live to learn, to challenge themselves until success

学会生活学会学习，挑战自我直到成功

4. Be the master of study

做学习的主人

5. Fly my English dream

放飞我的英语梦想

6. Do our best, enjoy ourselves

做最好的自己

7. More English, more fun

多些英语，多些快乐

8. Promise little, but do much

少许愿，多行动

9. Where there is a will, there is a way

有志者,事竟成

10. If you think you can, you can

相信自己能行

11. The more noble, the more humble

人越高尚，越谦虚

12. Time lost cannot be won again

时光流逝，不可复得

13. Time past cannot be called back again

时间不能倒流

14. Tomorrow never comes

我生待明日，万事成蹉跎

15. Nothing seek, nothing find

没有追求就没有收获

16. One never loses anything by politeness

讲礼貌不吃亏

17. Impossible is nothing Just do it!

一切皆有可能

18. Happy English, happy life

快乐英语，快乐生活

19. To do the most, to show the best

尽力做，秀最佳

20. English paradise, our world

英语乐园，你我的世界

21. Never say die Never give up

永不言败，永不放弃

22. Don’t be shy, just have a try

不要胆怯，勇于尝试

23. Study English happily Learn English easily

开心学习，轻松掌握

24. The more you speak, the better youll be!

说得越多，变得更好

25. There is no royal road to learning

书山有路勤为径，学海无涯苦作舟

26. The greatest talkers are always least doers

语言的巨人总是行动的矮子

27. Self confident, unremitting self-improvement

自重自信，自强不息

28. Creating the best class, do your best

创最好的班级，做最好的自己

29. Hard music school, unity and hard work

勤奋乐学，团结拼搏

30. Unity of tension, hard work ahead

团结紧张，拼搏进取

31. I believe my self-discipline, do not give up to succeed

我自律我自信，不放弃能成功

32. Assertive discipline, truth-seeking and innovation

自信自律，求实创新

33. A clean conscience confidence bravery, perseverance invincible youth

良心无愧信心无畏，恒心无敌青春无悔

34. With diligence and persistence, change the old

用勤劳坚持，换春华秋实

35. Grasp now, battle today

把握现在，决战今天

36. Struggle to create miracles, struggling to write brilliant

拼搏创造奇迹，奋斗书写辉煌

37. I am confident I am, I tried my success

我自信我出色，我努力我成功

38. Line and color, draw the most glorious life

用线条和色彩，绘人生最辉煌

39. Class Rong L, class shame my shame

班荣我荣,班耻我耻

40. Luck favors the prepared mind

机遇偏爱有准备的头脑

41. The success like the struggle of the people

成功垂青奋斗之人

42. If winter es , can spring be far behind?

冬天来了,春天还会远吗?

43. Dare and the world always yields

大胆挑战,世界总会让步

44. To pull together in times of trouble, split the waves move

同舟共济，劈浪向前

45. Nothing is difficult to the man who will try

世上无难事，只要肯登攀

46. Speak English, sing English We are happy

说英语，唱英语，大家都快乐

47. Happy English, happy life I believe I can do!

快乐英语，快乐生活我一定行

48. Everybody speak English, the world will be nicer

大家都来说英语，世界将更美好

49. Nothing in the world is difficult for one who sets his mind to it

世上无难事，只怕有心人

50. Rigorousness replaces loose, action instead of desire

51. Time is money

时间就是金钱

52. Truth never grows old

真理永存

53. No pains,no gains

没有付出,没有收获

严谨代替松散，行动代替愿望

My name is Zhao Yiqi, a horse. Im eight years old. Im in Renmin Road Primary School. Im a third-grade student. Look, I have black hair, bright eyes and a pair of dexterous hands.

I like reading. I have read many books, such as The Story of the Puppet, The Diary of the Smiling Cat, The 100,000 Why, and so on. From the books, I have learned a lot of knowledge.

I am a child who likes to laugh. I always have a smile on my face when something happens. I laugh at anyone who says the wrong thing in class, and I laugh endlessly at anyone who tells a joke during class. I read and laughed, watching TV and laughed. Once I saw a sketch of Zhao Benshan. I couldnt help laughing, and my stomach ached.

I love to play, too. After class, I play games with my classmates. After school, I play along the roadside. On weekends, I play in the fields. On holidays, I play at my grandmas house. Once, I ran out to play in the morning and came back at noon. My mother said, "You are so funny!"

This is me. Do you know me?

翻译服务合同(口译)

甲方：

乙方：______翻译

甲乙双方经友好协商，就乙方为甲方提供 语口译服务达成协议如下：

1.期限

口译服务时间为 年  月 日 到  年 月 日，共 天。服务天数从乙方翻译人员与甲方人员见面的当天起（包含），到乙方翻译人员与甲方人员分手的当天为止（包含）。不足一天，也按一天计算。

2.服务地点及具体内容

3.口译费

每天人民币  元，共计人民币  元。

4.付款

签订本合同之后，乙方提供口译服务之前，甲方需向乙方预付人民币  元，余款完成口译任务后立即支付。

5.质量保证

乙方保证派遣人员符合口译要求，能为甲方提供圆满服务。

6.其它

本合同一式两份，甲乙双方各执一份。

甲方（盖章）：

代表签字：

乙方（盖章）：

代表签字：

日期：  年 月  日

国际专利许可合同(附英文)

5.2.2.甲方受训人员在协议期间分两批，320人日以内〔翻译除外）赴乙方接受培训。

5.2.3.首批培训时间为合同生效后的第三至第四个月，甲方派技术人员4人，翻译1人到乙方工厂接受为期160人日（每周5天工作日）的培训。内容为合同产品的设计和制造工艺。

5.2.4.第二批培训人员的培训时间为合同生效后的第八至第九个月。甲方派技术人员4人，翻译1人到乙方工厂接受为期160人日（每周5天工作日）的培训，培训内容为合同产品的设计、加工工艺、装配工艺和机器的调试。

5.2.5.甲方负担受训人员的旅费。在乙方受训期间的膳宿费及驻地和工厂之间的交通工具由乙方负责提供。

第六条 技术资料

6.以乙方应按本合同附件二规定的内容和时间，在＿＿＿＿交付技术资料。

6.2.＿＿＿＿的邮戳日期，为技术资料的实际交付日期。甲方将带有到达印戳日期的空运提单影印本1份寄给乙方。

6.3在每批技术资料发运后24小时内，乙方应将合同号、空运提单号、空运报单日期、资料项目、件数、重量、航班号和预计抵达日期用电报或电传通知甲方。同时将空运提单和技术资料详细清单各一式2份寄给甲方。

6.4.若技术资料在空运中丢失、损坏、短缺，乙方应在收到甲方书面通知后30天内，免费外寄或重寄给甲方。在甲方收到技术资料后60天内，如果没有以书面形式提出资料不全或增补要求，则视为甲方验收。

6.5.技术资料采用英文，计量单位以公制表示。

第七条 考核与验收

7.1.合同产品的第一台样机，由甲、乙双方组成的联合考核小组，按附件七规定的时间和内容进行考核。如果符合附件一规定的技术要求，即可验收，并由双方代表签署合同产品考核 验收合格证书一式4份，双方各执两份。

7.2.如果合同产品的技术性能达不到规定的技术标准，双方应友好协商，共同研究，分析原因，采取措施，消除缺陷，进行第二次性能考核。考核合格后，双方签署考核合格证书。

7.3.如果第一次考核不合格是乙方责任，乙方应自费再次派遣技术人员进特第二次考核。

7.4.经过第二次考核仍不能合格验收，若责任在于乙方，刚乙方须赔偿甲方遭受的直接损失。并采取措施艄除缺陷，进行第三次考核。

7.5.经过第三次考核仍不合格，如系乙方责任，则甲方有权终止合同，并接第九条的规定处理。若系甲方责任，则由双方协商合同进一步执行的问题。

第八条 技术改进

8.1.乙方提供的技术资料，如有不适合甲方生产条件的（如设计标准、原材料、外购配件及共他生产设备等一，乙方有责任帮助甲方修改技术资料，闪加以确认。在不影响合同产品性能情况下，应采用中国产的原材料、配套元器件和设备。

8.2.在合同有效期内，双方对合同产品的任何改进和创新，都免费将改进或创新的技术资料提供给对方。

8.3.改进或创新的技术所有权属于改进或创新一方，另一方不得对其申请专利或将其转让给第三者。

第九条 保证和索赔

9.1.乙方保证所提供的技术资料是乙方经过实际使用的最新技术资料，并保证向甲方及时提供任何改进和发明的技术资料。

9.2.乙方保证所提供的技术资料是完整的、正确的、清晰的，并保证按时交付。

共21页，当前第3页123456789101112131415161718192021

翻译合作合同

甲方：_________

乙方：_________

双方经平等协商，一致达成如下协议。

第1条 定义

本合同有关用语的含义如下：

甲方：_________

乙方：_________

用户：指接受或可能接受服务的任何用户。

信息：指乙方按本合同向甲方提供并许可使用译文。

第2条 业务内容及价格

甲方要求乙方将委托之文件翻译为_________（语种）。

翻译：甲方应向乙方支付劳务费用，由_________翻译为_________（语种），收费标准为译后的每千中文字符数（电脑统计，不计空格为准）_________元人民币；其他语种翻译另议。

支付时间：_____________________

第3条 提供译文

（1）乙方同意按甲方书面要求之日期完成其委托翻译之任务。

（2）乙方应将译文于_________交给甲方。

（3）乙方按照乙方制定的质量翻译标准进行翻译作业，此质量翻译标准为鉴定译文品质之唯一标准。

（4）乙方有义务在甲方书面或电子邮件通知后对译文所出现的错误进行及时免费修改。

（5）乙方将提供甲方一份电子翻译文件和书面翻译文件，并盖乙方翻译章。

第4条 许可使用译文

乙方许可甲方利用译文制作成各式文档公开登载和展示。

乙方与甲方协商后决定是否标注译文的作者。

第5条 免责

甲方的用户可以免费使用译文，并可对译文进行复制或修改编译。用户或第三方以任何方式对译文进行使用、修改、演绎、下载或转载，乙方的所有者均不对包括许可方在内的任何人承担任何责任。

第6条 陈述与保证

双方保证其具有签订和履行本合同的权利和能力。

甲方保证译文由甲方的用户使用。

甲方保证译文的著作权人（如甲方不是信息的著作权人）同意其签订和履行本合同并不要求乙方的所有者支付任何费用，乙方可要求许可方就此提供译文的著作权人签署的文件。

乙方保证其向甲方提供的译文的及时性、完整性、合法性、真实性和准确性。

甲方保证乙方使用其译文的信息不构成对第三方任何权利的侵犯，同时甲方保证其签订，履行本合同不构成对第三方的违约或对第三方任何权利的侵犯，亦不会使乙方的所有者对任何第三方承担任何责任。

因甲方提供译文造成的对任何第三方的侵权，包括但不限于侵犯第三方的著作权，由甲方负责解决。

第7条 期限

本合同有效期为_________，即自_______年______月______日起至_______年______月______日止。合同到期后自行终止。

第8条 违约责任

任何一方不履行，不完全履行，不适当，不及时履行本合同，另外一方有权要求对方按约定履行本合同或解除本合同，并要求对方赔偿相应的损失。

任何一方由于不可抗力导致不能履行，不能完全履行本合同，就受不可抗力影响部分不承担违约责任，但法律另有规定的除外，受不可抗力影响的一方应及时通知对方，以减轻可能给对方造成的损失，并应当在合理期限内提供相关证明。

第9条 保密

未经甲方许可，乙方不得向第三方泄露本合同的条款的任何内容以及本合同的签订和履行情况，以及通过签订和履行本合同而获知的对方及对方关联公司的任何信息。

乙方按照甲方的要求提供保密措施。

共2页，当前第1页12

国际专利许可合同(附英文译本)

6.2 the date stamped by the air transportation ageney at_________，shll be takenas the actual date of delivery paryt a shall send to party b a photostat copy of theairconsignment note shwing the stampde date of arrival.

6.3 within twenty-four hours after the despatch of each lot of the technical documente，party b shal1 notify party a by cable or telex of the contract number， number and dateof the air consignment note， items of the documents， number of pieces， airmail toparty a two copies of each of the air consignment note and detaikled list of thetechnical documents.

6.4 if the technical documents are foumd lost， damaged or mutilated during airtrans-portation， party b shall supply party a free of charge with a second lot ofdocuments within thechortest possible time but not later than thirty days after it hasreceived from party a the writtennotice. within sixty days after party a has receivedthe documents from party b，if party a does not declare the shortage and request tocover the same， it is considered asa-cepted.

6.5 the technical documents shall be in english and based on metric system ofmeasure-ments.article 7 verification and acceptance

7.1 the verification test on the first samplemachine of the contracted&nbs p;product shallbe carried out by the joint group consisting of party as and party bs representativesaccordingto the schedule and contents stipulated in appendix 7 to the contract. lf theperformance of the contracted product is in conformity with the technical specificationsstipulated in ap-pendix 1， such testshall be considersd as qualified and therepresentatives of both parties shll sign the inspection and testing certificate for theproper performance of the contracted product in quadruplicate， 2copies for each party.

7.2 if the verification test demonstrates that the performance of the contractedprod-uct isnot in conformity with prescribed technical specifications， both partiesshall， throughamicable negotiations，make a joint study of and analyse the cause andtake measures to e-liminate the defects and carry out asecond test. when the second testdemonstuates tha the performance is qualified， both parties shall sign a testingcertificate for the proper perfot- mance

7.3 if party b is responsible for the failure of the first test， party b shall sendat ist own expense technical ersonnel for the second test.

7.4 if the second test fails again and the failure is attributed to party b， party bshallindemnify party a for any losses sustained and shall take effective measures toeliminate thedefects and carry out a third test.

共13页，当前第9页12345678910111213