英文自我介绍3句话【优秀20篇】

Good afternoon and nice o see you at this sunny afternoon.

I am very glad to be here for interview.

My name is YYX . I come from DLUFL and my major is english special lised in business.

Computer, books, films and climbing moutains are my favourite.

I have been a class president for nearly 4 years, and I also have been an interpreter at Dalian Garment Fair for twice.

I think all these exprience and my responsibility, creating thinking and passion would make me qualify for this job.

And whats more, my laptop computer is HP, so I have a better way to recgonize HP.

I believe that it would be a challenge and a chance for me to be a HP man.

Thats all ,Thank you so much!

hello!i am a college university graduates, benefited from strong school learning, innovation atmosphere, melting of which i became a versatile personnel.i am honest and trustworthy, tranquil.preferred college, contemporary literature, zhang ailing, zhang xiaoxian, baby anne, etc. some of my favorite writers, and their collected works fro id also seen enough.university for four years so i thought and knowledge, have been further psychological growth.

teacher professional learning in my school and teacher skills through professional training, testing, practice live ammunition when they give the students a dozen years on the courts language lessons, or feel good verbal ability.however, since i think my writing skills more than verbal skills.since the sixth grade, there had been the habit of keeping a diary, and occasionally there is the delight, i would write a small article in practice your pen,

i am in serious hard work in learning, professional knowledge in the mastered the basis of this, not forgetting to expand their knowledge, curricular knowledge on a broad and a relatively wide range.i am still learning the importance of english, and constantly strive to expand vocabulary, english communication ability and has made substantial progress.meanwhile, in order to enhance their overall quality, i actively participate in various activities, these experiences made me realize the importance of unity and cooperation, but also learned a lot socially expertise to improve the experience, this will join me in the future the community will play an importanteffect.

i also love poetry readings, and my thesis project topic is "on the" third generation "the pursuit of poetry," read by nearly one year to collect data and specific writing, that makes me the last time at the university ofpioneer of modern understanding of poetry is more comprehensive.overall, i think i was fully in line from your company clerk recruitment network requirements - "good writing, expression, and appreciation of the article."possible, now i do not have much experience, but i was young, learning ability, and are willing to study hard, i fully believe that you can work this job!so, in this, i look forward to your company give me a platform to show their talent, i would be grateful, and the development of building blocks for your company!

I am careful in the work of rigorous, practical work hard, have a strong sense of responsibility and initiative. And closely with the higher level and colleagues successfully completed the companys other work and tasks.Work in a team spirit, focus on teamwork. Have the ability to work independently. In the quality of skills can continue to learn new knowledge, new skills, pay attention to their own development, to ensure the competence of the current work.

I am passionate about management, dedication to the cause of work in large enterprises for many years, received a good education and training, accumulated a wealth of experience with outstanding personal leadership charm, to form a cohesive team, good at training the teams business knowledge and teamwork;

Have a strong organizational management and coordination, collective sense of honor strong, full of team spirit. Good written expression, verbal expression, comprehensive analysis, understanding, good communication and coordination of interpersonal relationships, full of responsibility and initiative, sincere man, quick thinking.

hello erery one,i called jane,i am born in 1995,Im verygald to know everybodyhere.Im a new member here,so there must be a lot of things that I dont know.If you can help me ,I will be very happy.I think I will be your goodcolleague soon.

people often said me is a easy-going girl,so i hope i can made many friend in this class,i think friend can help each other,and can share happness and sorrow,so if you have a friend,you shold be patient and more honest.

for myself,i like surf the internet ,becouse study it is too hardly and boring,so it can make me to relax,i also enjoy listen to music,especially

classcial music,i am relly like realing,it can get me more and more smart.In my spare time, I like to read novels. I think reading could enlargemy knowledge

in the future,i will try mybest to do erery thing,so i can not hate all touble ,i will thank for it ,it is can help me grow up errly.

我叫，19xx年6月1日出生，17岁，来自西安，我有着直爽的性格，但又不失稳重，不远千里来到怀化这座城市求学。

来到中专学习的事实和我的理想有很大的出入，难免有些郁闷，但在一段时间后，我认清了事实，很看计算机应用专业。"21世纪是电脑的世纪."这句话一点都不假，随着电脑的展，它为21世纪插上了腾飞的翅膀.后来在不断的培养兴趣过程中，我开始对电脑产生兴趣，今后的三年,我将在不断的学习进步中度过的。

“十年磨砺锋利出，宝剑只待君来识”。再苦再累，我都愿意一试，“吃得苦中苦，方为人上人”，在以后的学习生活中，我一定会是一位尽自己的努 力、过一个充实而又意义的中专生活。

各位考官好!

我是某大学的应届毕业生，虽然不是来自一流的名牌大学，但本人时刻以高素质的人才要求来锻炼自己，充分展示自己的个性，发挥自己的潜能。过硬的专业技能是我自信的基础，大学里的科研经历是我未来发展的基础。

大学里，丰富多彩的社会生活和井然有序而又紧张的学习气氛，使我得到多方面不同程度的锻炼和考验;正直和努力是我做人的原则;沉着和冷静是我遇事的态度;爱好广泛使我非常充实;众多的朋友使我倍感富有!我拥有很强的事业心和责任感，使我能够面对任何困难和挑战。我将利用所学知识与自身努力去迎接新的挑战，实现自身价值。

当今社会，方兴未艾的知识经济，入世后的体制改革，狒狒扬扬的网络狂飙共同编织了我们这个时代的生活背景，贵公司的业绩与良好的形象将我深深的吸引，而当年自信的我，有着一份激情，也有着一种稳重，"严于律己，宽予带人"是我的信条。"给我一个起点，我就能撬起地球"是我的格言，真诚肯干是我的准则，只要您给我一个机会，一个舞台，您的信任与我的实力将为我们创造共同的成功。

I am cheerful, stable, energetic, warm and sincere: to be serious and responsible to the work, good at communication, coordination, strong organizational skills and team spirit; lively and cheerful, optimistic, caring and good at teaching and teaching; , Diligent in learning can continue to improve their own ability and overall quality. In the future work, I will be full of energy, assiduously study the spirit to work hard and steadily improve their ability to work with the simultaneous development of enterprises. The insurance industry has made me grow very fast.

I have many years of sales and management experience, sales channels, to develop a strong ability. Strong sense of teamwork and strong sense of responsibility, team sense, and for many years of training to make their minds high and pragmatic, full of vitality and benevolence, and the spirit of self- Aggressive and rigorous.

Hi, Good afternoon everyone

name is .And I am from No. Overseas Chinese Middle School of .It is really a great honor to have this opportunity for an interview . I would like to answer whatever you may raise , and I hope I can make a good performance today .Now let me introduce myself briefly .

I am years old . I graduated from “ University”in . And then I got a higher degree in“ university ” in . I have worked for years since I graduated from the university .And I have been a headteacher for years .

Being a teacher is tired but excited . Having taught for so many years , I think I am experienced in teaching field . I have ever got much honor in teaching , but still I think I need a new environment to challenge myself .

I am open—minded , quickly thoughs and skillful in searching for information on internet . I can operate computer well . In my spare time, I have broad interests .Such as reading ,surfing the internet ,enjoying music ,writing some articles on my blog and even chatting with foreign friends online if possible .

我叫，是医学院专业的学生，在学校学习了丰富的知识，注重实践能力的培养，获得了医学学士学位。

本人工作方面：做事勤奋诚恳，自信上进，喜欢交往，致学以用。在学习方面：专业基础扎实，虚心，好学钻研，努力提高自身素质，善于接受新鲜事物，善于学习新兴技术和新的方法。心理方面：自我调节能力较好，有耐受。个人亲和力较好，善于沟通和交流。

对于医学，我有着深厚的感情。学医五年，我被这一门学科深深地迷住了，细读医理，不禁酣畅雀跃，精研医案，往往拍案叫绝，掩卷沉思，常感豁然开朗之妙，临床印证，时有立竿见影之功。

在追求知识的同时，我努力完善自己的人格。在别人眼中，我工作勤恳，为人坦诚，思想活跃，吃苦耐劳，维护集体利益，有敬业精神，与人为善，尊重他人。我深深懂得有高尚的道德观和完美人格的重要性，我也深信自己能做得更好。

临床医学是一个高尚的专业，需要我们加倍努力去探索和发展，我深知：只有拥有一技之长，精通自己的专业技能，才能在社会立足。在大学里我全身心的投入对这个专业的学习中。真诚的希望贵单位能给我一个施展自己才华的舞台，我将继续努力，全身心的投入到工作中，让自己不断成长，提高自己的能力，争取能为单位做贡献。

hello,everyone. (大家好)

very glad to be here.(非常高兴能来到这里给大家发言)

my name is ###, and i am years old.(我的名字是###，今年××岁了)

now i am a ___school student.(我现在是一名……学生)

my favourite subject is English . and i like sports very much . (我最喜欢的科目是英语，而且我很喜欢运动)

English brings lots of fun . and sports makse me happy .(英语带给我很多乐趣，而且运动使我快乐)

i like this sentence:“ nothing is impossible。”(我最喜欢的一句话就是：一切皆有可能。)

so i always try my best to do everything well,and never give up easily.(所以我每一次总是尽力做好每一件事情，从来都不轻易说放弃)

so this is me ,i hope to make friends with you all.(这就是我，我希望和大家都能成为朋友。)

thank you for listening!(谢谢大家的聆听!)

Since July 21 joined Road Equity Investment Fund Management Co., Ltd., with the leadership and colleagues in the companys teaching, training and help, making me in the ideological, work, study all aspects have been improved to varying degrees. Some of the previous work experience and school-related exercise in the work I have engaged in this now have some help, but many things need to re-understand and experience. Learning and practice can produce results of mutual integration, which are inseparable from the patient leadership unit of instruction and intangible body and mind, which I sincerely express my gratitude. Now my probation period since the relevant work summary is as follows:

1. Reimbursement: in strict accordance with the requirements of the financial system, handling expenses reimbursement matters, handling cash, online banking, check the receipt and payment business, so that the cash Nissin statements, reimbursement accurate, and special circumstances, special treatment.

2. Software accounting: timely registration in the financial software, cash, bank accounts, accurate receipt and payment, and regular checks with bank accounts.

3. Statement: according to the weekly capital statements, according to the needs of the preparation of balance sheet.

4. Cash, bills, check and document management: cash and notes management properly, perfect, notes and documents received in time registration, so that evidence to follow.

5. Payroll: the monthly payment of wages in a timely manner and accurate.

6. Banks matters: the daily banking business, mainly including the use of reserve funds, bank account opening, financial products to purchase, the public private money receipt and payment, the end of the month and the beginning of bank statements print, bulk card, credit card And so on with the bank docking matters.

7. Fixed asset management: do software card entry timely, accurate, when the physical inventory inventory, and regular inventory.

8. Financial-related system modification, layout, according to the companys financial system documentation, the production of financial expenses reimbursement process (visio diagram) and the corresponding PPT.

9. According to the business center needs, leadership requirements, collect and organize the financial analysis of the data required to produce the appropriate chart and formatting.

10. Timely and efficient completion of the leadership of the other tasks, to help other departments do the relevant financial work.

After three months of probation, I learned a lot at work. Financial cashier work seems to be simple, but it needs to do a lot of careful and patience, but also need to be cautious. For each sum of money for reimbursement, carefully, strictly in accordance with the companys financial system, and in accordance with the procedures for the implementation, in case of special circumstances are special treatment to ensure the normal operation of the company. To make cashier work can not use the "easy" to describe, it is the first line of financial work, financial revenue and expenditure of the juncture in the companys management plays an important role. As a qualified cashier, must have the following basic requirements: First, learn, understand and master the policies and regulations and company system, and constantly improve their level of business and knowledge and skills. Then, cashier personnel to abide by the good professional ethics. Second, the cashier must have a strong sense of security, cash, notes, all kinds of seals, it is necessary to have the internal custody of the division of responsibility, but also to contain each other.Finally, good communication skills, especially for others to explain or convey the relevant financial matters, good communication and expression can reduce the number of unnecessary unnecessary misunderstanding, greatly improve efficiency. Of course, in many ways, due to their professional knowledge, ability limitations, there are still some deficiencies in the future work in addition to abide by the above basic four points, I will continue to study hard to improve their professional skills, To adapt to the changing social environment and future work carried out by the company, with the times.

These are my three months of this work I have some experience and summary. In the future work and study I will make unremitting efforts to do their own work, and the road with the companys development in sync. At the same time actively assist others, the common development for the company. I sincerely thank the company leaders and colleagues for their support and concern in their work and life. I also earnestly ask the leaders of the company to give me a chance to continue to exercise and realize the ideal. I will use modest attitude and full of enthusiasm to do my own work, create value for the company at the same time, so that their own towards a higher level.

How are you, I call __.This year is 22 years old.Graduate from __college.Theprofession is a calculator multimedia.I am one is bright, optimism,there is the person of responsibility.A fondness for plays basketball, computer,listen to music, etc..Thankful your company gives me this the opportunity of thepersonal interview!

I am an accountant professional graduates, four years of professional learning makes me a solid grasp of the professional knowledge, proficient in word, Excel, U8 and ERP UF financial software management system.

I am a stable personality, patient who is diligent, hard-working, positive attitude. Accounting professional learning but also cultivate my careful, rigorous learning attitude. The school and the relationship between teachers and students is good, full of team spirit, strong logical thinking ability and strong sense of responsibility, and in future work will continue. It is because of this personality, I love the accounting work very much.

In practice, financial software lesson, we modify the input data, customer and employee business processing, vouchers, and report the production output has done a lot of practice. By accounting simulation practice, understanding from the collection of original documents, check vouchers, registration books, to the whole process of making statements. I firmly choose the accounting profession through professional learning, I think it is very suitable for the job, and hope for the success of accounting occupation career!

I was admitted to junior accountant and certified public accountants at present, hope to enrich the accounting professional knowledge, and strive to become a qualified accountant. I hope to find a financial work, can let me to learn the full play, improve the ability of business accounting, as a contribution to a force. The financial situation of extreme enthusiasm and persevere the spirit is the biggest factor I have the confidence to do accounting work.

Respected leaders:

I sincerely recommend myself to you! My name is . I am a graduate of Putian College in 20xx. I sincerely recommend myself to you with a sincere heart and dedicated pursuit of career.

Integrity and hard work are the principles of my life; calmness and calmness are my attitude when things happen; extensive hobbies enrich me; many friends make me feel rich! I have a strong sense of career and responsibility so that I can cope with any difficulties and challenges.

As a graduating student, my lack of experience may make you hesitate, but please believe that my energy and efforts will make up for this temporary shortage. Maybe I am not the best, but I am definitely the hardest. I believe: hard work must be able to win brilliant! Thank you!

Good afternoon and nice to see you at this sunny afternoon.

I am very glad to be here for interview.

My name is YYX . I come from DLUFL and my major is english special lised in business. Computer, books, films and climbing moutains are my favourite.

I have been a class president for nearly 4 years, and I also have been an interpreter at Dalian Garment Fair for twice.

I think all these exprience and my responsibility, creating thinking and passion would make me qualify for this job.

And whats more, my laptop computer is HP, so I have a better way to recgonize HP. I believe that it would be a challenge and a chance for me to be a HP man.

Thats all ,Thank you so much!

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

Familiar with the installation and maintenance of the software Familiar with the computer hardware assembly and maintenance, familiar with windows, xp, sever operating system installation and configuration and maintenance of a good foundation of computer knowledge and network technology, network equipment, LAN and networking technology have a certain understanding There are network security, network management and network maintenance of the basics. Understand the construction of the site familiar with the site editor and management to understand the optimization of the site know how to promote the site and site security. Understand the general network security software installation and use.

Proficient in linux server, windows server server configuration and management, network security management, sql server database series of operation and management, familiar with c language, c, delphi, java language, Cisco and Ruijie network equipment configuration and maintenance. In November to participate in the national soft test and access to "network engineer" intermediate title.

Strong self-learning ability, a high degree of responsibility, a strong plasticity, love of work, love life, honest and trustworthy, and people are good, filial piety, caring for others. Not pleased, not to have compassion. In the face of setbacks, convinced: born I will be useful. As long as 1% of the hope, we must pay 100% effort. Sincerely hope that my join for your units to bring considerable benefits.

years is approaching, review the past years, a sense of almost thousands. During the period to seriously abide by the rules and regulations of the company, love plants such as love home, but also in the work of constantly demanding their own, with the production of the process work, carefully completed the task of leading the layout. Diligent and enterprising, to be creative, to continuously improve their own work efficiency, work problems can be found in time to report to the leadership and to find a solution. In order to make greater contributions to the development of the company.

Forklift is the indispensable tool for production, as a forklift driver, must adhere to the post, serving the production of the work. Forklift with the class every day must be used with the packaging class to receive bags, finished packaging storage placed; with the use of handyman with additives, from the use of oil raw materials, empty oil drums finishing.

First, the work results

1, in line with the packaging class to receive the work of the bag, 20 minutes per shift to work in advance to help with the work of the packaging.

2, the production peak season, seven packaging lines at the same time boot, forklift task overload operation, the two forklift drivers must be division of labor, it takes more than an hour to return to the packaging mouth to help packaging finished product storage work. In the meantime, another forklift driver with seven production lines need to work in the library, it must have a more skilled professional skills and flexible thinking ability to complete the task in an orderly manner. In such a tense working environment, I can not disrupt, in strict accordance with the warehousing requirements of finished products placed in the work.

3, in the use of additives, with the mixed with a good job, a clear position of additives placed to help the correct use of good handyman, including the variety, quantity, in strict accordance with the laborers with a single recipients associated with the requisition process.

4, fork grease must be clear that the use of phospholipids and fish oil situation, in strict accordance with the warehouse managers logo fork with, if the warehouse manager failed to do a good sign, must first communicate with the warehouse manager to do a good job marking, eliminate the use of errors Or can not be used on a first-in-first-out basis. And fork to the workshop before the use of varieties, regional requirements placed, and in the pumping process in strict accordance with the requirements of the fork with the fork into the corresponding oil pool, no personal reasons affect the production, to ensure the smooth development of production. Before get off work, assist the handyman to store the empty oil bucket into the oil bucket area and keep the sanitation of the production area.

After completing nearly a month of induction training for new employees, I have a general understanding of the production technology of the position, and also have a certain theoretical basis. For theoretical knowledge and practice for the purpose of the combination, the company arranged for us to trainee, the trainee for a period of six months, has in the gas chemical industry, water treatment area, air division of the study area, this stage of our learning The process plays a vital role, during this time we can to the site close observation of equipment, and equipment operation, and some even directly on some equipment, valves to operate.

In the process of internship, when I encounter problems, I will take the problem back, first look at the manual, find information, try to answer their own, and after the discussion and exchange of master and team; if you can not ask the team master or craftsman, The study of the main production unit of the work area, so I have a preliminary understanding of as a whole; especially this can take part in overhaul, recognizing that this is a rare learning opportunities, their understanding of the production plant And process familiarity will be of great help; therefore, seize this opportunity, followed by maintenance group, in the "more to see, ask, remember, think more" learning attitude to the scene to learn, in this The process of their own gas gasification section of the gasification furnace, washing tower main device has a preliminary understanding of the Texaco process burner, venturi tube and other important parts of the equipment with a general understanding of the same time, Overhaul and overhaul of the car during the work process, the process of driving the oven has a rough understanding of the process. In the water treatment area, through the on-site study, and contact the gas chemical industry area, the recycling of water recycling, the preparation of desalination water and desalination water in the gasification section of the use of a certain understanding of the same time, recognizing the coal chemical industry Enterprise water recycling is very important.

Study in the air separation area, air separation plant as a gasification section of the upstream section, has a very important significance, not only to ensure that the gasification section of low nitrogen gas consumption, but also for the gasification section to provide adequate oxygen. At the same time, in the practice process, their air separation process of the process have a certain understanding of the air separation of the main device also has a certain understanding.

In the internship of six months, he also saw some of their own shortcomings, in the process of their own are constantly learning, thinking and working hard to improve; for example, their knowledge in the business accumulation is not enough, For many professional problems but also helpless; and some business-related knowledge is also very little know, so that can not better serve the learning of professional knowledge, which is their most important problem encountered, and the problem in the future very long There will be a period of time, but also the main problem; their theory and practice of dialectical guiding relationship is not enough understanding of the theoretical knowledge of the flexible use and flexibility to be improved; practical experience is not enough rich, which will serve as their future work Improve and enhance the focus.

University life is about to end, full of excitement and pride at the crossroads of life, ready to meet the future opportunities and challenges. Looking back on campus life and social practice, here it is necessary to summarize.

In ideology, positive progress, love the motherland, love the people, support the leadership of the Chinese Communist Party. Further in-depth study of the partys knowledge, the partys true policy, the system more profound understanding. Understand the first person, after learning the truth; in the school decided to submit the application form to join the party, and in the party school graduation was named "outstanding students", the glorious became a member of the Communist Party.

In the study, while trying to learn specialized courses, also selected the "computer programming", "psychology", "literary appreciation", "Japanese", "economic management" and a series of courses. At the same time pay attention to the computer, English and other learning, has passed the computer two, English forty-six examination. Can easily read the foreign literature. Through four years of undergraduate study, I have made great progress in all aspects, but there are still many shortcomings, to be further improved.

Knowledge is power, with the rapid development of society, the things learned in the University has been far from meeting the needs of society, in order to enrich themselves and improve themselves. I am enthusiastic, enterprising entrepreneurial spirit, during the school, and actively participate in social practice, and various cultural and sports activities, cultivate a certain degree of organizational and social skills, can quickly adapt to a variety of environments. Mastered a solid theoretical knowledge and business skills, with a certain amount of practical ability.

In life, frugal, positive, optimistic; in learning, hard-working, practical. In addition, I also pay attention to physical exercise, so I have a healthy body, strong physique; At the same time pay attention to communication with students and teachers, has a strong team spirit and strong organizational skills.

Familiar with the basic knowledge of clothing production, understand the theory of human structure, the clothing fabric, accessories have sufficient understanding of the nature, proficient in garment production process and technology, cost structure. Familiar with the clothing business orders orders single process, production scheduling process, the production process, inspection procedures standards. Hands-deep skills, work enthusiasm, passionate, helpful, strong communication skills, with innovative thinking, a team spirit and can withstand greater work pressure.

Self-confidence, honesty, seriousness, rigorous, like learning, love of creation. Art skills solid, good at Flash, 3Dmax, AI, Photoshop, has many years of animation experience, can quickly adapt to new things, has a good aesthetic ability, a unique creative style. He was responsible for many web pages, animation, game projects, familiar with the two-dimensional animation and three-dimensional animation of the production process, both design and management capabilities.