入职英文自我介绍模板(经典20篇)

Good morning, my name is , is University of Fashion Design and Engineering 20 session of the graduates. It is an honor to have the opportunity to introduce myself here. During the school, I master the system of clothing design, garment structure technology and clothing management theory and practical ability, familiar with the basic theory and basic knowledge of clothing subject, by clothing design and garment structure technology basic training.In order to be able to I learned a lot of books not on the clothing expertise, improve the overall quality, so I am on the clothing materials, clothing technology, and so on, so I have a lot of experience, Clothing pattern making an eye-opener, so I mastered a lot of knowledge, which is more determined to dry clothing I am a strong interest in this industry. I will continue to enrich themselves, so that their efforts to become the apparel industry professionals. During the university I served as the Minister of the student union, exercise my hard-working and pragmatic, eclectic habits, to strengthen my sense of professionalism, responsibility, and cultivate my good at unity, the courage to innovate.

I always focus on the organization, communication, collaboration, innovation and other comprehensive capacity-building, and actively participate in student work and collective activities, in the process, a comprehensive exercise of my thinking ability, innovation, problem solving, problem solving and problem solving. The ability to communicate, training my hard-working, not afraid of difficult scientific spirit, and enrich my expertise. I am cheerful, good at communication, team spirit; new knowledge of new things have the ability, innovative spirit, willing to accept the challenge. I like the design of clothing, clothing design in the hope that this vast world expose their talent, but also look forward to your company with a broad and powerful stage of a show of talent. I am confident that I am competent to work in your company. If you are hired by your organization, I will be in their own positions on the practical work for your companys development and contribution to my talent and wisdom.

y name is ... i was 19 years old.i am a senior high school student.i am good at surfing online.my hobby is widespread,such as reading,listening to music, playing basketball.i am young，bright，energetic with strong study-ambition.i have good presentation skills and positive active mind essential.my future is to be a teacher.i hope i can make more children acquire knowledge .

good morning,my name is karies.Its a great honur to have the opportunity for this interview. I would like to answer whatever you may raise,and I hope I could make a good performance today.Now I will introduce myself briefly.

Doctor Jocob Chen once said" Aim high ,vertical launch ,fly fast,complete your mission with style." Now given the chance,I will try my best to make it.

Good afternoon (morning), professors：

It is my great pleasure to be here. My name is mingmingzhou , graduated fromComputer Science Department of Wuhan niversity.During my four-year study in the university as an under-graduate student, I have built up a solid foundation of professional knowledge, as well as a rich experience of social activities. I am a determined person, always willing to achieve higher goals.

Whats more, I am good at analysis, with a strong sense of cooperation. All of these led me to the success of passing the first round of the entrance examination to the Masters degree. Personally, I am very humorous and easy-going, enjoying a goodrelationship among my classmates. In my spare time, I like to read books regarding how to be myself and how to deal with problems. Music and movies are my favorite entertainments. As for my sportinterest, I could not deny my greatest interest is football. Playing this game brings me a lot of glory, happiness and passion.

All in all, Wuhan University, with a highly qualified faculty and strong academic environment is the university I have long admired. I believe that I am a very qualified applicant for admission into your Master of IT program and can contribute to the enrichment or diversity of your university.

Elder sister, my name is , I think I was a lively and cheerful, sunny boy positive. My motto is: simple life, practical work, to do their best. What is the simple life?

Is easy, communication with the people to be polite and friendly, but also keep a smile, with a sincere heart. What is the practical work? Is the treatment of learning and work, have to be out laughing and smiling face, conscientious, strict in demands, for what they are doing to take their share of responsibility. And what is called best? That is the last person to form their own the style, then this Style provides a reference for others to learn and live by themselves and others

Of course, I also have their own shortcomings and deficiencies, such as lack of social experience, not enough work experience, and this is the main reason why I want to join in this department, hope the skills take quite high on their own, to broaden its scope of communication, but also a strength of their own community contributions.

Distinguished leadership, hello. My name is , I come from Shanghai. This is a graduate of Nanjing University of Technology, School of information management and information system professional. Before graduation, I have worked in Shanghai Xingda Network Limited, and your company is the same industry.

I am cheerful, good at smiling, sociable, good working attitude. Good at writing, familiar with computer system and all kinds of office software, application software, has the advantages of simple programming ability. I believe that all this will be my greatest wealth. I work in a long time will notice that your company, your company is undoubtedly the best * * industry the (you know, honor or achievements fill). At the same time I understand that this is a young and energetic team. I am very eager to for one of them.

If I am lucky enough to be employed, I will think that the company will create the best interests for its own best interests and not for the price. I will do everything in good faith and work hard with my colleagues. I will work hard and strengthen my studies and make progress!

I am a very outgoing girl(boy), I like reading、playing games and listening to music, of course, I also like to make friends with all the people in the school, I hope I will be your best friends in the sckooe life.

My name is . Im nine years old. Im in class three, grade eight, Experimental Primary School

I was a tall, white skin, have a glossy black hair, two eyebrows, a pair of big eyes, others are my eyes can speak.

I am a lively and lovely little boy, my character is very outgoing, I see strangers, take the initiative to greet him, let alone acquaintances

My hobby is widespread, reading "playing computer, playing, watching TV, I love reading, my shelves are full of my love of the book, a story King ,

I am a diligent child, I always do my own thing, not let my father and mother go to help, the yard is dirty, I always go clean

I have a weakness is doing homework very careless, this shortcoming I must try hard to correct, please look at my actual action!

20xx I graduated from the Polytechnic of Chifeng Business English, specializing in intensive courses, extensive reading, commercial law, WTO and so on. During the school obtain a Certificate IV in English, Mandarin II B certificates, Teacher Certification, Inner Mongolia Autonomous Region in June 20xx won the best graduate certificate and graduate certificate good colonel.Internship internship primary school English teachers who, after graduation when the information officer in the company, as long as the job is answering, and after-sales service and advice.I mixed introverted extrovert, enthusiastic, adaptable, can work independently but also value the team spirit, the work of their choice have great enthusiasm, will own most of the efforts by the best! Hope that companies can be considered, thank you!

各位领导、同事：

你们好!

我是_的新人_x，很高兴、也很荣幸能跟大家在“_公司”一起工作、学习。

我是_大学计算机学院_级毕业生，修的是信息安全专业。学校里面教的东西很多很杂，学到的东西也“博而不专”。语言方面，掌握比较熟练的是c/c++，当然，在编程方面和各位前辈们比起来，那简直就是菜鸟。所以在以后的工作中还要向各位前辈同事学习、请教，望给予指点。在犯错误的时候，也请前辈们批评指出，“新人”不是逃避责任的借口，我会牢记这句话的。

在兴趣爱好方面，作为学计算机的学生，时喜欢打些竞技类游戏。

体育运动方面，喜欢游泳，为了尽可能享受学生的优惠，在临毕业的时候还赶紧办了张游泳卡;也喜欢打乒乓球，之前每天都看到同事下班后在公司的乒乓球室打球，想去呢，但有点不好意思。

以上是我的自我介绍。

谢谢大家。

各位老师、同学，大家好，我叫-。幼年时曾作过许多色彩斑斓的梦，当个播音员、或者当一名电视节目主持人是我最大的梦想。

于是，我利用一切机会学播音，练演讲，说相声，打快板，表演舞蹈，主持节目。我参加爸爸所在部队的春节文艺晚会，我表演的快板书绕口令受到战士们的热烈欢迎。我深深的知道，作一名合格的播音员或者电视节目主持人是一件十分不容易的事情，成长的道路上会有成功的喜悦，但更多的是失败的沮丧;会有收获的幸福，但更多的是耕耘的艰辛。但我有勇气、有决心去应对这一切。于是，这天，我站在了同学们中间。我和在座的同学们一样，渴望展翅高飞，渴望将来有更大的发展空间，有施展才华的更广阔的天地。我想，有耕耘就会有收获。

未来的四年里，由各位老师的倾情传授，我们必须会有一个无限完美的未来。

Hello! Traffic bank of China is one of the five largest commercial banks, the development of fast, high quality staff, good service attitude, these deeply attracted me, I hope you can become a member of them.

I am a somewhat quiet but optimistic girl, love to see the book in my spare time, listen to music or write essays under his perception of life. Running, playing badminton is my favorite sport everyday. I am a do anything love strict demands on themselves, do something serious, not hi. Procrastination in college, I have to study hard, study hard, and with the help of our teachers have achieved excellent results, has won the university scholarship system. Through the study of professional knowledge, to have a deeper understanding of accounting, and more inclined to engage in financial accounting and related work.

In addition, I also actively participate in various activities. In various activities, cultivate their own management ability and team spirit, can quickly integrate into the team, strong adaptability and fast learning ability, and the establishment of a high sense of responsibility. Practice participation, in addition to let me have the ability exercise outside, also let me understand many Weirenchushi truth. People can not only do the things you want to do, but must do their own thing, on the road of life, continuous efforts, constantly struggle, always abide by the "not all perfect, but worthy" principle.

As a senior graduates, although no work experience, but I believe that as long as there is a high degree of responsibility for their work, and can hold a modest positive attitude to study hard, brave to face every challenge, no matter what is God helps those who help themselves, do not. If I was you hired, I will do our best to work hard, do not live up to your expectations.

First, the ideological and political aspects: always adhere to Marxism-Leninism, Mao Zedong Thought, Deng Xiaoping Theory and the important thought of "Three Represents" to guide their actions. Love the motherland, love the people, always for the interests of the people as their relentless pursuit of life, and always maintain the Communist Party of the noble feelings and good character.

Second, the learning areas: conscientiously study the legal knowledge and related work and business knowledge, combined with the actual characteristics of their work focus on learning "the Peoples Republic of China Public Security Administration Punishment Law", "Criminal Law", "public security organs for administrative cases" In accordance with the relevant laws and regulations, and in combination with their own in the document writing and document processing, computer knowledge deficiencies, targeted study of document writing and document processing and computer knowledge, through learning, to further enhance the legal awareness , Legal concepts and improve their ability to work.

Third, in the work, conscientiously collect the information, comprehensive and accurate understanding of the various aspects of the work of the situation, analysis of the main problems, summarize the work experience, timely reporting to the leadership, so that the leadership as comprehensive and accurate To understand and grasp the recent work of the actual situation, to solve the problem to make scientific and correct decision-making.

Fourth, the life: thrift, love public property, strict self-discipline, honesty and trustworthiness, helping others, respect for leadership, unity of colleagues, always maintain a good image of the peoples police.

In the future, I must study hard, work hard, do a qualified civil servants, for building a moderately prosperous society and building a harmonious society to make its own contribution!

Good morning teachers and classmates,im glad to be here for self-introdution.My name is and i come from grade seven class .I have a family of four,my mother ,farther ,brother and me.we are getting along with each other ,i usually help my mother do house work when my farther is out of home and i am a deligted person and willing to help others while in trouble.

I like watching TV and playing basketball with my partners in part time .I also need others encuragement while i dont pass eaxminaion .so i fee that we should help each other.Thank for giving me a chance of makng a speech.

I have a solid knowledge of the accounting profession, to complete the daily business of Independent Accounts, profit and loss carry-forward, cost accounting, the tax is levied, afterwards, reimbursement, etc., we learned professional courses have achieved excellent results, and for two consecutive He was awarded scholarships for outstanding students; know how to do manual and computerized bookkeeping accounts, computer skills, familiar with the dish, the UF, office, VFP, network design, software industry operations; Western good level, with some English conversation, reading ability to obtain CET certificate; I am strong social skills, interpersonal relations, and to adapt, learning ability, serious and responsible, honest and trustworthy, warm and generous, have good moral character; for many years so I have a tenure of cadres strong work, organization, management and communication skills. I am willing to do everything to the Companys own development and work hard!

本人具有扎实的会计专业知识，能独立完成企业的日常账务处理、结转损益、核算成本、计缴税款、算账、报账等工作，所学的专业课程均取得优异的成绩，并连续两年获得优秀学生奖学金;懂得手工做账和电算化记账，电脑操作熟练，熟悉金碟、用友、office、VFP、网业设计等软件操作;外语水平较好，具有一定的英语对话、阅读能力，取得大学英语四级证书;本人社交能力强，人际关系好，适应、学习能力强，对工作认真负责、为人诚实守信、热情大方，具有良好的道德品质;多年的任职干部让我具备了很强的工作、组织、管理和沟通能力。我愿意竭尽自己的才能为本公司的发展而努力工作!

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

英文简历自我评价范文3篇

用英文做一个简历上的自我评价，本文是第一范文网小编为大家整理的英文简历的自我评价范文，仅供参考。

英文简历自我评价范文精选：

突出专业知识：

顺利完成专业课程学习，熟练掌握专业理论知识和实验技能，具有很强的动手能力，善于学习新知识和适应新环境。英语口语流利，具有良好的英语阅读、写作能力;普通话标准。

Completed all the courses in the specialized field, obtaining good command of theoretic knowledge and experimental and DIY skill; Very adaptable and Good at leaning.Fluent in oral English , with fairly good of reading and writing ability; Speaking authentic Mandarin-Chinese.

突出技能要求：

具有良好的计算机技能，熟悉各类Windows操作系统以及Office系列办公软件，可使用C语言和FORTRAN语言进行编程，对于AUTOCAD、PHOTOSHOP、 CORELDRAW 、DREAMWAVER也有一定的了解和使用经验。

Good command of Computer skills: familiar with different versions of Windows OS and Office application software, able to program with C and Fortran languages, obtained some experience and understanding about other widely-used software like Autocad, Photoshop, Coreldraw and Dreamweaver.

突出性格能力：

有很强的领悟力和理解力，思维开阔、敏捷，能够很快适应不同环境。

Strong perception & intellect; with widen and swift thinking; able to be quickly adapted to different environmenet.

勤奋，踏实，有责任心，对自己的工作尽职尽责。

Diligent; with sureness; responsible; everytime fulfil my duties to my own work.

思想活跃、创新与变格精神尤佳。

Being active; creative and innonative is a plus.

做事认真、专注，有计划、有条理，较强的分析能力，追求完美。

Conscientiously, absorbedly work in a planned and order way; with good analytical capability, pursue the perfection.

形象良好，性格温和、稳重，亲和力强，善于与人相处。

Good image; temperate, calm and steady personality; strong affinity; good at getting along with people.

有耐心，对压力和挫折有承受力。

Patient; have holding capacity to pressure and setback.

英文简历自我评价范文大全：

Mature，dynamic and honest.

思想成熟、精明能干、为人诚实。

Excellent ability of systematical management.

有极强的系统管理能力。

Ability to work independent1y，mature and resourcefu1.

能够独立工作、思想成熟、应变能力强。

A person with ability plus flexibility should app1y.

需要有能力及适应力强的人。

A stable personality and high sense of responsibility are desirable.

个性稳重、具高度责任感。

Work well with a multi-cultural and diverse work force.

能够在不同文化和工作人员的背景下出色地工作。

Bright，aggressive applicants.

反应快、有进取心的应聘者。

Ambitious attitude essential.

有雄心壮志。

Initiative，independent and good communication skill.

积极主动、独立工作能力强，并有良好的交际技能。

Willing to work under pressure with leardership quality.

愿意在压力下工作，并具领导素质。

Willing to assume responsibilities.

应聘者须勇于挑重担。

Mature，self-motivated and strong interpersonal skills.

思想成熟、上进心强，并具极丰富的人际关系技巧。

Energetic，fashion-minded person.

精力旺盛、思想新潮。

With a pleasant mature attitude.

开朗成熟。

Strong determination to succeed.

有获得成功的坚定决心。

Strong leadership skills.

有极强的领导艺术。

Ability to work well with others.

能够同他人一道很好地工作。

Highly-motivated and reliable person with excellent health and pleasant personality.

上进心强又可靠者，并且身体健康、性格开朗。

The ability to initiate and operate independently.

有创业能力，并能独立地从业。

Strong leadership skill while possessing a great team spirit.

有很高的领导艺术和很强的集体精神。

Be highly organized and effecient.

工作很有条理，办事效率高。

Willing to learn and progress.

肯学习进取。

Good presentation skills.

有良好的表达能力。

Positive active mind essential.

有积极、灵活的头脑。

Ability to deal with personnel at all levels effectively。

善于同各种人员打交道。

Have positive work attitude and be willing and able to work diligently without supervision。

有积极的工作态度，愿意和能够在没有监督的情况下勤奋地工作。 Young，bright，energetic with strong career-ambition.

年轻、聪明、精力充沛，并有很强的事业心。

Good people management and communication skills. Team player.

有良好的人员管理和交际能力。能在集体中发挥带头作用。

Able to work under high pressure and time limitation.

能够在高压力下和时间限制下进行工作。

Be elegant and with nice personality.

举止优雅、个人性格好。

With good managerial skills and organizational capabilities.

有良好的管理艺术和组织能力。

The main qualities required are preparedness to work hard, ability to learn, ambition and good health.

主要必备素质是吃苦耐劳精神好、学习能力优、事业心强和身体棒。 Having good and extensive social connections.

具有良好而广泛的社会关系。

Being active, creative and innonative is a plus.

思想活跃、有首创和革新精神尤佳。

With good analytical capability.

To do a mechanic, to deal with their work to understand a clear, familiar and skilled in their own work. Have all the machines and equipment to understand, but also have the ability to respond to failure, deal with the equipment may occur at any time failure. To meet the needs of the production schedule, our unit of equipment, although the new equipment, but also frequent failures, such as machine washing machine, no major problems, minor problems in the maintenance process, and gradually improve the machine cleaning Machine awareness, so that small problems can be dealt with quickly, as well as liquid sandblasting machine, in use, there is always a failure to plug the nozzle, so that can not work, broken through the brain, after operator description Cause of the failure, my analysis, the glass beads used in diameter than in the past, and the specifications are not uniform, resulting in a blocked nozzle, after a bold improvement, increasing the nozzle aperture, the liquid blasting machine is normal work ,

The tunnel cleaning machine, always produces the transmission chain does not move, before the adjustment of friction, you can, but once, how to adjust the friction, does not work, after analysis, that the friction coefficient is not enough, Found, and sure enough inside the oil, after careful cleaning, remove the oil, everything is normal, and so a series of maintenance work, we must understand the principle of equipment in order to good maintenance, which is my years of experience in maintenance , I do not understand, I have to try to study, once understood, they suddenly realized, looks complicated, as long as understand, it will be simple, I not only bear the equipment maintenance work, but also completed a lot of tooling Production, for example, several engine-based experimental bench design, mobile engine racks, and so on dozens of pieces, this year we re-manufacturing engine varieties increased a lot, not before these test benches, the workshop down

The task, we immediately accept, and actively to complete, from conception, to the leadership through the design intent, and then cutting the welding, production, and so on, until the engine is placed, commissioning, delivery, each engine model Of the experiment to go through our first course, like the troops did not move for the first horse, when the civil servants of the various engines in the production of my bench to test, I feel very honored, thank the leadership to me Such a platform, but also feel the work of their labor and excitement, but also for the development of our manufacturing pride, but these will make me work harder, modest and prudent to learn from others, as far as possible to improve their ability to work , So that their own positions in the play to the greatest effect, faster and more efficient to complete their own work, but also enable us to get the maximum benefit units, so that my work and the harvest of workers can achieve a balance , So I am more motivated, more confident work.

And other colleagues of interpersonal relationships is also important, because a persons ability is limited, the success of each thing is by the collective wisdom, and colleagues together is the successful completion of leadership to the work of the premise, which It is not just work, but also in daily life. So it is not only personal but also a duty to work together. I have a good relationship with my colleagues. I often help each other because I only have one mechanic. There is a power maintenance workers, a good relationship, and I work with all my colleagues, I have great respect at work, mutual cooperation, is to improve a lot of efficiency, for example, in the oil depot anti-theft window, the test station Door, in the production of sandblasting between the asbestos roof when the rain, give sandblasting between the welding air pressure pipe, we collectively work together, mutual cooperation, active, so that the task is completed very quickly, and this is the power of unity , To play the power of everyone in order to make work progress faster. I deeply understand.

In the repair of the old and waste conservation, but also everywhere carefully, in the production of rain roof, with the waste angle, in the welding air pressure pipe, the use of the waste plant threading pipe,

Dear Sir or Madam,

Having heard that there is a need for students of English major in your company, Id like to render my services for the post you are offering.I am a 23-year-old undergraduate expecting to graduate by July 20xx from the Department of English, Central South University, with a bachelor degree majoring in English.

In the past three years, I have participated in several activities concerning the application of English. In July 20xx I used to work as an office assistant in an Import Export Company for two weeks, during which I have done some translation and reception work that enabled me to learn a great deal which couldnt be taught in class. Whats more, June 20xx saw my translation efforts made for the tender materials of English version of some construction companies. I think my education and previous experiences will enable me to offer helpful services.

The enclosed resume will tell you more about my details, and my references, to whom I can refer you as to my personality and ability, is available upon request. I shall be pleased to come to your office for a personal interview at any time that is convenient to you.

Yours faithfully

Respect leadership:

How do you do! Please will bother. Im a just from hubei economy academy graduate students. I am very honored to have the opportunity to present you my personal information. In all the society, in order to find the accord with their professional and interested in work, to achieve their life value, and to all the leaders as a self recommendation.

We will own the brief introduction is as follows:

I am a learning hotel management professional college students, I love my professional and for its input the enormous enthusiasm and energy. In the four years of college life, I learn from the content includes theoretical knowledge to the professional skills of learning knowledge. . Through to these knowledge learning, I have this field of knowledge has a certain degree of understanding and master, and has a certain practical operation ability and technology

In the school study, both the basic theory knowledge, or practical operation skills, I took the excellent results. In the school besides study, I also take an active part in social practice activities. Once in 20xx to participate in the school of a program under which officials social practice activities. Has been awarded excellent activists in May 20xx to October once went to France to study western food culture and French high star hotel practice, so that I can master more standard and system of the western food service. Can the use of fluent in French and guests communication.

I sincerely hope to be able to your hotel to realize my dream, to your hotel give my a power. At the same time also hope to be able to your hotel and the unity and cooperation among the elite. Believe that can make the hotel later career progresses day by day. If I am lucky enough to add to the hotel, I would certainly work hard of do my job.

Good afternoon! Professors ：

I am honored to introduce myself. My name is 30 years old, born in city, province. In year 20xx and 20xx, I received my Bachelor degree and Master degree in i University. I major in .

After my graduation, I got a job in . In the past three years, I was involved in several research projects, such as 。Owning to my hard work, I was rewarded the Excellent Prize in the successive three years.

However, with time going on, the more I experienced, the clearer I realized that I am really interested in the exchange process of . I find that the similar and complicated problems rise in my study subject, so I’m eager to cognize more about this field and I hope I can study further in this University .

So I am standing here now. I am really excited. I believe what I am doing is a right thing.

Thank you!

为什么考

I am interested in . I find that the similar and complicated problems rise in my study subject, so I’m eager to cognize more about this field and I hope I can study further in this University .

介绍你的学习计划

Firstly, I hope I can form systematic view of . Secondly, I wish to find a way to solve the complicated problem in my study subject.

如何毕业并发表论文

Firstly, I will work harder than before. I believe I am industrious man and “Time is money”. Secondly, my dissertation can rely on my study subject, they have similarity, so time can be saved.

Finally, I will read enough English papers to finish my SCI paper.

1, familiar with the terminal sales process and store the daily maintenance and management, good at customer development and maintenance.

2, three years of sales experience and more than a year of architectural design experience and the University of the building structure of the study, so I have to communicate with the construction side and after-sales technical support have more advantages.

3, in addition to the daily sales work, I can skillfully use Photoshop and cad software for drawing, as well as the overall program with the production.

I have received formal professional education, has a good professional knowledge and cultural qualities, honest, honest, high integrity; positive, decisive, strong psychological quality, strong entrepreneurial spirit and a high sense of responsibility; With a strong organization, coordination, communication skills and team spirit; through more than a year in the education and training institutions, responsible for market development, etc., and so on, the company has a strong sense of responsibility, Writing, calligraphy and so on, love sports, dance, like to play feathers, ping-pong, and so on, and so on, so that they can play, basketball!