委托代理进口协议书7篇 协议范本怎么写【精选20篇】

文字作品委托代理合同

甲方（代理方）：____________________________________

乙方（被代理方）：__________________________________

为发展我国文艺事业，繁荣文化市场，甲、乙双方经充分协商，于_______年______月______日达成如下协议。

一、代理事项

文字作品的推介策划、包装；为文字作品的交易寻找购买方，提供并报告签约机会、宣传媒介；与潜在购买方就交易事项进行洽谈，直至促成交易代为签订合同。

本合同所称文字作品，是指本合同第二条所列，且尚处于文字状态的各种文艺作品。

二、文字作品名称、种类、状态

名称：_______________________________________________________________；

种类：□ 电视剧 □ 电视电影 □ 电影 ，集数：_____________________；

状态：□ 创意 □ 故事大纲 □ 分集梗概 □ 剧本 □ 小说及其它体裁文学本

版权保护中心登记号：_________________________________________________。

三、合同的有效期限

本合同有效期为_______年，即自_______年______月______日起，至_______年______月______日止。

四、甲、乙双方的权利与义务

4.1 乙方应保证其交由甲方代理的文字作品不含有侵犯任何人著作权、名誉权、隐私权等任何违法内容，如因之而引起纠纷者，由乙方负责处理，若因之给甲方造成损失者，乙方应予赔偿，赔偿额包括但不限于律师费；

4.2 乙方应当保证，甲方为本合同项下文字作品于本合同第一条所约定的事项在全球范围内的唯一代理人，在任何情况下，乙方均不得自行或允许其他第三方从事与甲方所代理事项相同或相类似的事项，如乙方需就本合同项下文字作品与任何第三方进行交易洽谈，应事先书面通知甲方，洽谈的结果视为甲方的工作成果；

4.3 本合同生效的同时，乙方应向甲方出具足以使甲方能够代表乙方就本合同项下文字作品的交易对外洽谈、签约的授权委托书

4.4 甲方有责任为本合同项下文字作品尽力争取相对实力雄厚的购买方和最大化的交易价格；

4.5 甲方有责任为乙方争取各种适合本合同项下文字作品的交易机会，将针对本合同项下文字作品所进行的工作及时回馈给乙方

4.6 甲方不应以任何方式要求乙方对文字作品进行违背国家法律、法规和社会公共道德的修改；

4.7 甲、乙双方在任何场合下，必须维护对方形象，不得以任何形式指责、诋毁、中伤对方；

4.8 为了乙方的利益，甲方可将本合同项下所享有的权利部分或全部转托第三方行使，但甲方转托第三方行使后，乙方所享有的权利不应低于本合同的约定，受转托的第三人应得的报酬由甲方承担；

4.9 甲方必须在乙方文字作品的交易价款全部到账后七日内向乙方支付其应得的部分；

4.10 甲、乙双方的联系方式为本合同落款处的各种方式的任意一种。任何一方联系方式的变化均应及时通知对方。本合同有效期内，乙方不得以任何理由回避或拒绝与甲方的联系，根据甲方要求，无正当理由，乙方不得拒绝参加与本合同项下文字作品意向购买方的接触、商谈；

4.11 本合同期满，如果乙方就本合同第一条规定的事项继续对外委托的，在同等条件下，甲方享有优先签约权。

共2页，当前第1页12

代理操盘协议（一）

甲方（委托方）：_________________________

乙方（代理方）：_________________________

丙方（监管方）：_________________________

本着平等互利、优势互补原则，经过三方共同协商，达成代理操盘协议如下：

1.甲方出资_________元人民币作为本金，投入国内证券交易市场。委托乙方代理操盘，委托丙方代理监管。除非实际亏损超过____％，不得中途抽资。

2.本金为甲方所有，年投资收益的____％为甲方所有，____％为乙方所有。

3.乙方在代理操盘期间负责实盘操作，按照中期波段进行操作，选择合适的交易时间和交易品种，决定下单金额和数量。

4.乙方以保证金_________元承担投资风险的____％。保证金存入甲方资金帐户，所有权属于乙方。

5.丙方协助甲方开设资金帐户，负责对该帐户的监管；确保帐户资金的安全。

6.丙方不承担投资风险、不分享投资收益。

7.在代理期间一旦出现亏损，丙方有责任立即向甲方通报详细的亏损情况，并有权在亏损超过____％时强制平仓。

8.丙方负责按季度结算，年度清算及收益分配。结算内容包括：股票市值、现金、盈亏；清算内容包括：股票市值、现金、盈亏、甲方收益、乙方收益。收益分配包括：将收益按上述规定支付给甲乙各方。

9.代理期限为_______年，自______年_____月_____日起，至______年_____月_____日止。本协议签章日起生效。一式三份，甲、乙、丙三方各执一份。

10.在代理操盘协议生效期间，若出现协议中未提及的问题，三方协商解决。

甲方（签字）：_________

_________年____月____日

乙方（签字）：_________

_________年____月____日

丙方（盖章）：_________

代表人（签字）：_______

_________年____月____日

甲方： 签定时间：

乙方： 签定地点：

甲乙双方经友好协商，甲方委托乙方代理记帐事宜：

一、代理记帐范围

1、根据甲方提供的原始凭证和其他资料，乙方代理甲方进行一般的建帐，建制和记帐、算帐、报帐、办理客户各项纳税事宜。

做好各类纳税报表，凭证及帐册，每年年底之前做好各类综合报表，年鉴报表等各种财务所需帐目凭证，保证甲方正常营业，并顺利通过税务审计。

2、乙方在每月2号之前派专人到甲方所在地收取作帐资料，办理会计核算业务，甲方向乙方提供完整、真实的作帐资料，以便乙方能及时作帐。

乙方每月8日前为甲方作完纳税报表及帐册凭证并到税务部门报税，同时通知甲方立即交纳足额的税款到纳税账户，若甲方没有及时交纳税款所引发的损失乙方不负责任。

乙方有义务提供给甲方财务方面咨询及合理化建议并对代理甲方业务过程中知悉的商业秘密保密。

3、由于甲方提供的作帐材料不完整、不真实等导致乙方作帐的错误引发的损失，乙方不负责任。

4、对于甲方以前的帐务，乙方不负责任。

5、乙方在申报期及时为甲方申报，因乙方作帐出现问题和误时申报造成的损失由乙方负责并承担由此所造成的一切损失。

6、在代理期间如甲方遇到查帐或审计，乙方应予以配合，就代理所采用的会计政策等作出解释。

二、记帐资料交接

1、乙方派专人收取甲方记帐资料，每次收取记帐资料履行相应的交接手续;

2、本协议终止后乙方必须向甲方指定的帐册接续人办理交接手续以保_帐务的延续、完整。

三、违约责任：

1、乙方在作帐过程中造成的作帐错误、作帐资料丢失等原因，为甲方带来损失由乙方负责并承担由此所造成的一切损失，甲方有终止本协议的权利并不视为违约。

2、甲乙双方在协议签定之日起，甲方随时可终止合同，甲方不提出终止合同，本合同长期有效。

四、代理记账费用及结算

1、甲方每月按人民币 元支付给乙方作帐费用：。

2、结算方法：一季度一付，预付。

3、每年1月另需支付 元帐本材料费。

4、甲方需乙方代买__等其他事项所产生的费用实报实销。

五、其 他

1、本协议双方中任何一方对本协议内容需变更或解除，须提前用书面形式通知另一方。

2、在本协议执行期间，甲方有权派指定人员对代理甲方的帐务查帐。

对甲方指派人员提出的疑问作出解释。

3、本协议双未尽事宜，双方应在互惠互利的原则下协商解决。

4、本协议一式二份，双方各执一份。

甲方： 乙方：

代表： 代表：

年月日

进口合同(样式一)

4.工作联系工作制度

（1）卖方在技术人员来华前两个月应将其姓名、性别、出生年月日、国籍、专业、职务、经历、工作单位、懂何种外语等通知买方，以便买方协助办理签证手续。

卖方技术人员来华前七天，应用电报或电传将其姓名、解切启程日期、班机号、抵达日期、行李件数和重量等通知买方。

（2）卖方技术人员到达本合同工厂后，由双方总代表协商确定卖方技术人员的工作安排和月度的工作计划。卖方技术人员应按双方商定的工作计划在买方的统一安排下进行工作。工作计划需要修改时，应经双方总代表协商确定。

（3）卖方技术人员每周工作四十八小时，（每周工作六天，每天工作八小时）作息时间应按合同现场的规定进行。

卖方技术人员如需加班时，需事前经双方总代表协商同意。正常工作日八小时以外的额外工作及星期天、节假日的工作都算加班。但卖方技术人员在投料试车、考核期间在每周四十八小时内的倒班不算加班。加班后应尽量在短期内安排倒休，每加班六小时倒休一天。如不能倒休的，可按每加班一小时考勤1.5小时，每小时按日技术服务费的八分之一支付加班费。加班费按本附件三5条规定支付。

（4）卖方技术人员在华工作期限，自抵达合同现场之日起至离开合同现场之日止计算。

（5）卖方技术人员每天工作的实际时数，有薪节假日和加班时数，按日记载在“记时卡”中，“记时卡”一式二份，由双方总代表签字，作为支付卖方技术人员日技术服务费和加班费的依据。

（6）工作进度、每天完成的主要工作、发生的问题或责任事故以及解决的办法应用中、英文记载在“工作日志”中，每天由双方总代表签字一式两份，买卖双方各执一份。

5.卖方技术人员的休假

（1）卖方技术人员在华连续工作六个月以上者，可携带夫人和两名十五岁以下的子女来华，其费用均由卖方负担。

（2）卖方技术人员在华连续工作十二个月并带家属者，每九个月可以回国无薪休假15天。

卖方技术人员在华连续工作六个月不带家属者，每六个月可以回国无薪休假15天。

上述卖方技术人员的休假所产生一切费用均由卖方负担。休假时间以不影响现场工作为前提，由双方总代表协商确定。15天假期自卖方技术人员离开合同工厂之日起至回到合同工厂现场之日止。

卖方同意在卖方人员休假期间不减轻其对合同工厂承担的义务。

6.卖方技术人员及其家属在中国居留期间，应遵守中华人民共和国的法令以及合同工厂的规章制度。

7.卖方技术人员应根据“中华人民共和国个人所得税法”交纳个人所得税。

8.买方的责任和义务。

（1）买方应为卖方技术人员在现场配备为执行合同工厂的任务所需要的一定数量的翻译人员。

（2）买方应协助卖方技术人员及其家属办理入出中国国境和在中国居留期间的手续，费用由卖方自理。

（3）买方应为卖方技术人员及其家属在中国居留期间的安全采取必要措施。

（4）买方为卖方技术人员免费提供办公室和必要的工作用具及劳动保护用品和提供从住宿地点到本合同现场的上、下班交通工具。

（5）买方为卖方技术人员免费提供在中国的医疗（镶牙、配眼镜、滋补营养品的费用除外）。

共17页，当前第16页1234567891011121314151617

独家销售代理协议

有关双方在平等互利发展贸易的基础上签订本协议并达成条款如下：

1.有关当事人：

供货人：中国＿＿＿＿＿＿＿进出口公司（以下简称甲方）

代理人：＿＿＿＿＿＿＿公司（以下简称乙方）

2.商品及数量：

甲方委任乙方为某商品的独家销售代理人。乙方保证在协议期间销售上述商品不少于（某某数量或金额）。

3.地区：

以某地区为限。

4.订单的确认：

协议商品的有关数量、价格和装船期，应在逐笔交易中确认，其细节详见甲方销货确认书。

5.付款：

在订单确认后，乙方应于有关销货确认书规定的时间内，安排开立以甲方为受益人的、百分之百金额的、不可撤销的即期信用证。并于开证后立即通知甲方以便甲方准备装运。

6.佣金：

甲方于收妥货款后，按每批货物发票价值的百分之＿＿＿＿＿＿向乙方汇付佣金。

7.市场情况报告：

乙方有义务每三个月向甲方寄送一次详细的报告，反映当地的市场情况和消费者意见。乙方还应随时将其他供货人所报同样商品的样品，连同其价格、销售情况、广告资料等寄给甲方参考。

8.广告宣传费用：

乙方应负担协议期间在上述地区的一切广告宣传费用。所有用作广告宣传的草稿和绘图必须送交甲方取得事前同意。

9.协议有效期：

本协议经有关双方签字后保持有效＿＿＿＿＿年，从某日期起到某日期止。如果一方需要延长协议，必须在满期前一个月书面通知另一方。如果一方未能履行协议条款，另一方有权终止本协议。

10.仲裁：

凡执行协议引起的一切争议，应通过双方协商解决。如协商不成，应提交北京中国国际经济贸易仲裁委员会，按其仲裁程序暂行规定则进行仲裁。该委员会的裁决是终局的，并约束双方。

11.其他条款：

（1）甲方不应向上述地区的其他客户供应协议商品。如有任何直接询盘均要转介乙方。但是，如有任何客户坚持要与甲方直接交易，甲方有权直接成交。在后一情况下，甲方应送给乙方销货确认书副本一份，并按该笔交易发票净值的百分之＿＿＿＿＿为乙方保留佣金。

（2）如果乙方未能在＿＿＿＿＿月内向甲方寄送至少某某数量或金额的订单，则甲方不再受本协议的约束。

（3）对于双方政府间的交易，甲方有权按其政府授权直接成交而不受本协议的约束。乙方不应干涉这种直接交易，也不应对此提出索赔或佣金的要求。

（4）其他条款应以双方签订的正式销货确认书为准。

本协议共写成一式四份，每方各执两份。

甲方（供货人）：＿＿＿＿＿＿＿＿ 乙方（代理人）：＿＿＿＿＿＿

代表：＿＿＿＿＿＿＿＿（签字） 代表：＿＿＿＿＿＿＿＿＿（签字）

＿＿＿＿＿年＿＿＿＿月＿＿＿＿＿日在＿＿＿＿＿＿＿签字

甲方：___________

乙方：___________

兹由甲方委托乙方代理记账，经双方代表协商，达成以下协议;

一、业务范围 乙方接受甲方委托，对甲方即日起的经济业务进行代理记账。

二、甲方的责任与义务 甲方的责任是：建立健全企业管理制度;依法经营，保证财产的安全完整;保证原始凭证的真实、合法、准确、完整;按照有关规定及时足额缴纳各项税费。

甲方的义务是：

(1)对本单位发生的经济业务，必须填制或取得符合国家统一会计制度规定的原始凭证

(2)配备专人负责现金和银行存款的收付，保管好所有往来单据，并定期与乙方提供的账面数额相核对;

(3)指定专人做好会计凭证传递过程中的登记和保管工作;

(4)负责向乙方提供原始凭证授权签字人名单;

(5)及时向乙方提供会计核算所需要的全部有经手人及授权签字人签批的原始资料和其他有关资料，并对账务处理的真实性和完整性负责;

三、乙方的责任和义务 乙方的责任是：按照会计准则、会计制度和其他会计法规要求为甲方代理记账，保证账务处理的真实性、合理性和合法性。

乙方的义务是：

(1)根据《中华人民共和国会计法》及国家统一会计制度的规定，开展代理记账业务;

(2)根据甲方的经营特点，指导甲方设计相应的会计制度;

(3)设计会计凭证传递程序，做好凭证签收工作，指导甲方妥善保管会计档案，并在合同终止时办理会计工作交接手续;

(4)按照有关规定审核甲方提供的原始凭证、填制记账凭证，登记会计账册，及时编制会计报表;

(5)办理甲方各项纳税事宜。

代理记账的定义 《会计法》第36条明确规定：“不具备设置条件的应当委托经批准设立从事会计代理记账业务的中介机构代理记账。”

代理记账是指将本企业的会计核算、记账、报税等一系列的工作全部委托给专业记账公司完成，本企业只设立出纳人员，负责日常货币收支业务和财产保管等工作。

甲方： ___________

乙方： ___________

____年____月____日

抗体委托加工合同

甲方（制备方）：____________

地址：______________________

开户银行：__________________

行号：______________________

账号：______________________

电话：______________________

传真机：____________________

乙方（委托方）： ___________

地址：______________________

开户银行：__________________

联系人：____________________

电话： _____________________

传真机：____________________

账号：______________________

委托项目

数量

价格(元)

技术要求

交货期

见合同附表

见合同附表

说明 ：

1.甲方为乙方提供委托加工服务时,甲方完全按照双方商定的各项技术指标要求，数量，期限进行操作，具体细节详见附表。

2.甲乙双方协商定价，并在签订合同后乙方应向甲方付合同金额总数的______预付款，甲方方可进行生产。乙方因故中止或终止本合约，预付款作为违约金不再退还乙方。对遗留物品及阶段性成果，甲方有权自由处置，乙方不得干涉；但在合同中止时，双方也可另行商定处置方式。

3.甲方在产品加工完成后，乙方将余款结清，同时甲方将产品交付乙方。

4.合同履行过程中，因乙方提供的抗原出现问题而影响实验工作的正常进行时，由乙方负责承担相应责任和各种损失，对因此给甲方造成的损失并给予经济补偿。

5.甲方保证按合同约定及时安排实验，并保质保量完成。因甲方原因不能完成时，甲方应退还乙方定金，双方另有约定的除外。

甲方：________________

（单位盖章）

经手人：______________

______年_____月_____日

乙方：________________

（单位盖章）

经手人：______________

______年_____月_____日

委托方: (以下简称甲方)

受托方:北京同立钧成知识产权代理有限公司 (以下简称乙方)

鉴於甲方欲就其 向中国专利局申请 专利权;

鉴於乙方为国家知识产权局指定的涉外专利代理机构,拥有专业的专利代理人,有丰富的专利代理经验,可提供专业的专利申请代理服务;

甲方经充分了解後,与乙方经友好协商就上述专利申请之委托代理达成如下协定:

第1条 合同内容

1.1 甲方委托乙方就甲方拥有的 向中国专利局申请 专利,包括 ;

1.2 乙方指派 负责上述专利的代理工作;

1.3 甲方授权乙方全权处理本合同申请案的上述事宜.

第2条 甲方权利义务

2.1 甲方权利

2.1.1 甲方有权要求乙方在约定的期限内完成专利申请初稿交甲方核查,并有权及时了解上述专利申请的进程及相关情况;

2.1.2 在乙方违约时,甲方有权要求乙方承担本合同约定的违约责任.

2.2 甲方义务

2.2.1 甲方应无保留地向专利代理人全面陈述该项专利申请案的技术内容,提供详细的技术交底书,相关附图和有关的资料及证明;或由甲方的技术人员向代理人详细介绍申请专案的技术内容,并交付必要的文字资料和图式;

2.2.2 甲方应指定专人与乙方联系,并及时交接有关文件,如有人员或通讯位址变更应及时通知乙方;

2.2.3 专利申请过程中,甲方应在接到乙方有关专利申请书面通知後,应在该书面通知所述期限内,及时给乙方进一步作业的书面指示;

2.2.4 甲方同意按双方约定的代理费标准以及支付方式支付基本代理费及超权代理费;官费部分按中国专利局标准支付给乙方,由乙方代缴.

第3条 乙方权利义务

3.1 乙方权利

3.1.1 乙方有权要求甲方在约定的期限内支付相关代理费用;

3.1.2 在甲方违约时,乙方有权要求甲方承担本合同约定的违约责任;

3.2 乙方义务

3.2.1 乙方应按照本合同约定的期限和内容,为甲方提供专利代理服务;

3.3.2 乙方指定的代理人员变更的,应取得甲方同意,并及时通知甲方;

3.3.3 乙方代理人的尽快完成初稿撰写,自甲方依本合同第4.1条支付基本代理费之日起,发明专利申请应於10-15个工作日内完成,返给甲方审阅;实用新型专利申请应於7-9个工作日内完成,返给甲方审阅;外观设计专利申请应於1-2个工作日内完成,返给甲方审阅.(注:甲乙方技术讨论时间,照相制图时间不计在内).

3.3.4 乙方应及时向甲方通告专利申请过程中事务的处理意见,或及时徵求甲方意见;

3.3.5 乙方在完成代理递件後,应将申请档副本及核对帐单及时交与甲方;专利局档应及时转交甲方.

第4条 代理费用

4.1 本合同乙方的基本代理费用为 ( ),甲方于合同签订後五日内支付;

4.2 专利申请权利要求超项的,独立权利要求每超权一项甲方应向乙方另行支付500超权代理费;从属权利要求超过十项的,每超权一项,甲方应向乙另行支付200元超权代理费;

4.3 专利局收取的官方费用为 ( ),甲方于本合同签订後 日内支付,由乙方根据缴费期限向国家专利局代缴;

4.4 甲方支付基本代理费後,乙方开始作业;乙方完成正式稿後,提交专利局前,甲方在2日内支付请款单列明的所有费用.

第5条 合同终止

5.1 本合同签订後,因甲方原因导致申请案中途停止的,本合同终止,乙方所收代理费不予退还;

5.2 在合同有效期内,甲方可解除与乙方的代理关系,本合同终止, 乙方所收代理费不予退还,乙方协助甲方向中国专利局办理解除委托手续;

5.3 在本合同有效期内,因甲方未提交详尽的技术资料或甲方技术方案的原因导致专利申请中途停止的,本合同终止,乙方所收代理费不予退还;

5.4 本合同有效期内,因乙方故意或者重大过失导致甲方专利申请无法继续进行的,本合同终止,乙方所收代理费用应予退还;

5.5 乙方完成本合同代理义务,本合同终止.

第6条 保密条款

6.1 甲方须将需保密的具体要求和内容向乙方提出特别声明,并记录在案.甲方提供的技术资讯,须标明

6.2 乙方在专利档撰写完毕後,应将甲方事先标明保密注明交回的资料交回甲方.

6.3 乙方对甲方提供所有资料,除用於甲方专利申请外,不得用於其他任何用途.

6.4 乙方保密义务自取得发明专利的公开日或实用新型专利的公告日起解除.

第7条 法律责任

7.1 甲方应按照专利申请的要求,向乙方提供完整,详细的技术资料,否则造成公开不充分的,乙方不承担法律责任;

7.2 在专利申请审批期间发生发明人,申请利纠纷时,应按专利法及相关规定先自行协商或经有关部门调解解决,因此而发生的专利审批时限的延误,终止,甲方自行承担法律责任;

7.3 因甲方原因如甲方未指定人员,通讯位址变更,未及时给予工作指示等,造成档转寄受阻或延误期限,乙方不承担法律责任.

7.4 因乙方过错导致乙方代理甲方提出的专利申请被驳回或者被视为撤回的,如可弥补,乙方应义务弥补;如不可弥补,乙方退回该申请案的基本代理费;

7.5因乙方故意导致发生本条第7.4款情形的,乙方应赔偿由此给甲方造成的直接经济损失;

7.6 如甲方有确切证据证明乙方恶意违约行为,甲方有权解除委托代理协定,并有权向乙方追索代理费用.

第8条 其他

8.1 本合同专利申请,授权後案件甲方委托乙方进行期限管理的,双方另行签署委托协定;

8.2 本合同未尽事宜,双方可签订补充协议.如在合同期间发生争议,双方应协商解决,协商不能解决的,双方均可提请北京市贸易仲裁委员会仲裁;

8.3 本合同一式两份,甲乙双方各执一份,具有同样法律效力.

8.4 本合同自双方签章日生效,有效期为两年,有效期限届满前两个月内,双方可另行协商续签事宜.

甲 方 : (签章) 乙 方: 北京同立钧成知识产权代理有限公司

代表人:(签字) 代表人:(签字)

签署日期 年 月 日 签署日期 年 月 日

委托方(甲方)：地址 电话：

受托方(乙方)： 地址： 电话：

甲方聘请乙方作为专项债权管理顾问，以合法的方式向甲方之债务人催收逾期欠款，根据《中华人民共和国合同法》及相关法律，经双方协商，特订立本合同，以资共同遵守执行。

第一条、 代理内容

1、乙方接受甲方的委托向欠款人(身份证号：) 进行欠款催收。

2、应乙方要求甲方同意乙方可根据案情需要，在经甲方书面同意的前提下转委托第三方催收，但接受转委托第三方的行为及因此产生的经济、法律责任由乙方自行承担。

第二条、 催收范围

1、甲方向乙方提供书面资料包括：

2、根据本条第一项的书面资料，甲乙双方确定向债务人主张的欠款数额为人民币(大写)元整，在此债权的基础之上，甲方允许乙方在免除债务人人民币(大写)元整(小写元整)债务的范围内与债务人协商处理。

第三条、 代理费用

1、 代理佣金费用按乙方收回的实际金额，并根据债务逾期时间按一定的比例计算支付乙方(含债务本金、利息、违约金、损害赔偿金及其他相关费用)。根据本案的实际情况，本次代理佣金费用为实际回收欠款金额的%，大写百分之结付乙方。

2、甲乙双方协商确定，欠款人、担保人将全部债务款项以下列第种方式向甲方支付。 ①、欠款人、担保人将全部债务款项直接汇入甲方所指定的银行账户，汇兑费用由欠款人或甲方承担;

②、欠款人、担保人将全部债务款项以现金方式交付乙方，再由乙方转交甲方。

3、 该笔业务一周内未经乙方催收而主动还款或其他非乙方的原因而偿还欠款，则该金额从所确定的债务总额中扣除。如欠款人非乙方原因偿还欠款应出具书面说明，否则其还款仍应认定为乙方催收的结果，并计算支付代理费用。

4、 在每个案件结案后甲方应根据乙方实际催缴的欠款金额结算代理费用，在回款进入甲方帐户后10个工作日内，向乙方支付全部代理费用。

5、 甲方支付人民币￥(大写元整)，作为本案前期费用。用于本案的调查取证及差旅等相关费用。该笔费用在成功回款后可在结算时在代理费用中抵扣，该笔费用追款失利也不退还甲方。

第四条、 代理期间

乙方在签定本代理合同后即开始进行实际催收工作，代理期限为个月，即年月日至年月日。

第五条、 甲方的权利与义务

1、 甲方应客观、全面、详尽地向乙方陈述案件事实，如实提供与案件有关的所有材料。

2、甲方应依合法约定时间支付代理费用及前期费用。

3、甲方有权随时检查、监督乙方代理业务的办理进度、办理质量。

4、甲方有权向乙方了解有关本案的调查材料代理意见，有权要求乙方提供与案件有关的材料。

5、甲方明确告知乙方在催收债务的过程中只得采用合法的方式，因乙方催收处理方式导致乙方与欠款人之间的法律纠纷及法律责任，与甲方无关，由乙方自行承担与解决。

第六条、 乙方的权利与义务

1、乙方应依法履行代理职责，维护甲方的合法权益，维护甲方社会和市场信誉。未经过甲方的书面同意，乙方不得擅自减免欠款人部分或全部欠款(债务本金、利息、违约金、损害赔偿金等相关费用)。

2、除甲方有一定明确方向的建议需求外，乙方还应就受委托事务执行相关的业务问题向甲方进行尽可能全面与详尽的告知。乙方应就提醒通知的各个适当步骤予以建议，就可预见及可避免的不利情况予以防止。

3、乙方不得与欠款人串通(包括但不限于私自接受欠款人宴请送礼)，损害甲方的利益。

4、乙方应建立业务联系制度、结案报告制度，定期向甲方报告催收情况。

5、本合同结案或合同期满时，不论实际回收金额的多少，乙方都应向甲方书面提供结论性报告。

第七条、 合同的解除

1、甲方隐瞒重要事实不提供或不如实提供有关材料的，乙方有权书面通知甲方解除本合同,但由于非甲方原因致使客户产生或将要产生实质性的严重后果如信息不完整、不真实、不准确的，甲方对此不承担有关责任。

2、乙方处理受托事务违法，并对甲方产生或将要产生实质性的严重不利影响的，甲方有权提出解除合同，并要求乙方赔偿甲方因此产生的损失。

3、无论何种理由，协议一方决定提前解除委托代理合同时，均提前一个月书面通知对方，通过书面协议解除本合同。

第八条、 保密责任

甲、乙双方在代理过程中知悉的对方的商业和客户资料，以及协议一方要求保密的其他任何事实和材料，乙方向甲方提供的提醒的通知的报告、记录及意见等材料，双方都负有保密义务，未经对方事先书面同意，不得向第三方泄露，如有违反应赔偿给对方造成的实际损失，法律、法规另有规定或上述应保密的材料或信息非因对方的原因被公开的情形除外。

第九条、 争议解决方式

如本合同发生争议，由甲、乙双方协商解决。协商不成，通过甲方所在地人民法院诉讼解决。

第十条、免责条件

乙方在催收过程中因人力不可抗拒因素如(战争、自然灾害、车祸等)导致欠款无法追回的，乙方不承担责任。

第十一条、合同期限

本合同一式贰份，甲乙双方各执壹份，具有同等的法律效力，本合同自甲乙双方签名及盖章后生效，代理期限届满时自动失效，若代理期限届满，代理事项尚未处理完毕，如甲乙双方认为必要，甲乙双方可另行签订合同。

委托方(甲方)：身份证号：

受托方(乙方)： 身份证号：

年月日

甲方：财政部

乙方：代理银行 根据中华人民共和国财政部与……(贷款国政府主管机构名称)签署的贷款协定(或会谈纪要)，(贷款国名称)同意向中国政府提供(贷款金额和币种)的政府贷款用于(项目名称)。

(省级财政部门名称，以下简称借款人)根据《关于外国政府贷款转贷管理的暂行规定》(财债字〔1999〕230号)确定该项目为第一类贷款项目。根据借款人的推荐，财政部(以下简称甲方)审核同意该项目由……(代理银行名称，以下简称乙方)负责外国政府贷款的财务代理工作。

经协商，甲乙双方达成协议如下：

一、乙方根据甲方提供或乙方与贷款国金融机构为该项目签署的对外金融协议中规定的贷款条件(包括贷款金额、贷款利率、贷款期限及还款方式等)将贷款转贷给借款人。乙方不对项目进行评估，不承担贷款还本付息风险。

二、甲方委托乙方办理以下业务：

(一)要求借款人及时提交下列文件：

1.甲方关于同意该项目利用外国政府贷款的批复;

2.省级以上计划部门或经贸部门对项目可行性研究报告的批复和/或利用外资方案的批复;

3.代理银行要求的其他文件(由银行列明具体内容)。

(二)审查借款人提交的有关文件。在审查文件时，如果发现问题而无法办理转贷时，应及时报告甲方。

(三)代表甲方与借款人签订转贷协议。在转贷协议签订之前，乙方应将转贷协议草本报甲方确认，并在转贷协议签订后将副本报送甲方备案。

(四)建立必备的项目档案。

(五)根据借款人或借款人委托的采购公司提交的申请，按对外金融协议和转贷协议的规定办理贷款项下提款手续，并根据贷款机构或外方银行的提款回单，负责贷款的账务记录并通知借款人。

(六)按转贷协议的约定通知借款人偿还本息及支付费用。

(七)按对外金融协议的要求，办理贷款本息及费用的对外支付。

(八)受甲方委托对项目实施进行财务监督。

(九)如借款人未能按转贷协议的约定按时如数偿付到期的全部债务，乙方应进行催收，并应及时将催收情况报告甲方。

(十)负责贷款项目的统计工作，向财政部和国家外汇管理局报送项目统计资料。

(十一)受甲方委托，代表甲方与国外贷款机构或外方银行就项目执行、债务管理、统计数据等问题进行业务联系。

(十二)甲方委托的其他有关事项。

三、甲乙双方应就项目的执行情况定期交换意见。

四、乙方按甲方《关于印发〈外国政府贷款转贷手续费收取办法(试行)〉的通知》中的有关规定(财债字〔20__〕74号)收取转贷业务费。

五、如借款人未能有效履行还款责任而导致不能按期还本付息付费时，乙方应先行予以垫付。乙方应将对外垫付的本息、罚息及按国家规定可收取的有关费用的明细清单在下一个年度1月15日前上报甲方，并抄送借款人。甲方对乙方提交的清单审核无误后，将采取财政扣款措施，按照实际发生额(包括本息、罚息和国家规定的可收取的有关费用)以相同币种或按实际拨付日银行外汇卖出价折算成的人民币在同一财政年度内拨付乙方。

六、乙方对外垫款所需的外汇将按甲方与国家外汇管理局的有关规定办理。

七、甲方如未在上述第五条限定的本财政年度以内拨付垫付资金，按违约支付额以发生时银行活期存款利率按日支付违约金。

八、对协议执行过程中发生的争议，甲乙双方应协商解决。

九、本协议经双方签字盖章后生效，有效期截止到该项目对外金融协议及转贷协议执行完毕。

十、在本协议有效期内，如需对本协议进行修改或者补充，需经甲乙双方协商一致后，签订修改或补充的书面协议。修改或者补充的书面协议，与本协议具有同等效力，若与本协议有不同之处，以修改协议为准。

十一、本协议于 年 月 日在北京签署。本协议正本两份，副本一份。正本由甲乙双方各执一份，副本由借款人持有。

甲方：财政部 乙方：代理银行

(授权代表) (授权代表)

赣州市产权交易委托合同

赣州市产权交易中心制

合同使用须知

一、本合同文本是根据《中华人民共和国合同法》和湖北省、赣州市产权交易管理的有关规定制定的示范文本。本合同适用于出让、受让委托。本合同条款均为提示性条款，供双方当事人约定时选择采用。

二、为更好地维护合同各方当事人的权益，当事人签订合同时应当慎重，力求具体、严密。拟订具体条款时，需约定的必须填写，无须约定的用“本合同不涉及此条款”表示。

三、当事人应本着诚实信用的原则，向其他当事人披露与订立合同有关的一切事项，保证合同条款真实，积极履行合同义务，对合同签订、履行的法律后果承担完全责任。

四、“代理业务”内容一般包括：

（适用出让委托时选择） （适用受让委托时选择）

1.制作交易申请书； 1.寻找交易目标；制作收购意向申请书；

2.寻找受让方； 2.根据交易目标制作投资分析；

3.制订谈判方案并参与谈判； 3.制订谈判方案并参与谈判；

4.制作有关法律文书（合同等）并参与合同签订；4.制作有关法律文书（合同等）并参与合同签订；

5.办理交易市场合同审核的有关手续； 5.办理交易市场合同审核的有关手续；

6.参与财产的交割； 6.参与财产的交割；

7.办理权证变更等手续； 7.办理权证变更等手续；

8.有关法律、法规、政策咨询； 8.有关法律、法规、政策咨询；

9.其他。 9.其他。

五、委托标的，可以是专利和非专利技术，商标权，非上市国有、集体全资企业整体或部分产权，非上市国有、集体控股或参股企业国有及集体产权，上市公司控股或参股企业国有及集体产权，科技成果和以科技成果、风险投资所形成的产权，合法的其他类型所有制企业产权，以及依法可转让的其他各类产权。

六、委托标的的交易方式，可以是竞价拍卖，招标转让，协议转让，招募法，有偿兼并，融资租赁，以及其他合法方式等。

七、提交的文件，出让方应当提供营业执照或其他资格证明、税务登记证、自然人的身份证明、准予转让产权的有效决议或代行出资人权利的上级主管部门批文等资料；受让方应当提供营业执照或其他资格证明、税务登记证、同意受让产权的有效决议或主管部门批文、资信证明等资料。

八、权证变更过程中所发生的费用，包括但不限于应支付房产、税务、工商等有关部门的权证变更费用。

九、合同涉及的当事人是自然人的，请填写姓名及身份证号码。

合同当事人

委托方：______________________

住所：________________________    电话：________________________

法定代表人：__________________    职务：________________________

受托方：______________________

住所：________________________    电话：________________________

法定代表人：__________________    职务：________________________

共3页，当前第1页123

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

甲方：

乙方：

经甲乙双方友好协商，就甲方(花园城项目)将 车位、商铺、别墅交付以及客户开放日活动委托乙方进行策划、执行事宜，双方经友好协商，达成如下一致协议：

第一条：委托事项

甲方委托乙方对 客户开放日及交付 活动进行策划、物料采购安装、活动执行等事宜，具体委托事项为：

1、方案策划

乙方应对本次活动进行策划，并向甲方提交策划方案，同时提交相关物料及活动清单。

2、物料采购

乙方提供的策划方案及物料清单经甲方书面认可后，乙方负责相关物料及设施的采购。

3、活动执行

物料及相关设施采购完毕后，乙方应在甲方指定的时间内进行现场摆放、安装、布置，并按合同约定进行相关活动安排等，最终完成本次任务。

4、其他为实现合同目的的事项。

第二条：合同价款及支付方式

1、本合同总价款共计人民币(大写)柒万贰仟捌佰元整(￥72800.00 )，

该价款为包干价，包括了乙方完成全部委托事项所需的策划费、物料采购费用、运输费、安装费、人工费、安装费、税金等全部费用。除非甲方对合同附件清单中项目做出调整而导致合同总价款相应增加或减少外，该合同价款不因其他因素而调整。

2、付款方式

本合同签订后，乙方按照甲方要求完成活动执行方面的工作，活动结束后，经甲方确认合格，乙方开局活动服务费发票给甲方，甲方需于合同签订日起)，顺延90个工作日内向乙方一次性结清活动费用72800.00元，大写 柒万贰仟捌佰元整。如逾期，按本合同《第四条款·第二节》执行违约责任。

3、付款前，乙方应向甲方开具等额有效发票，否则，甲方有权拒绝付款。

4、乙方指定收款账号如下：

开户名称：

账 号：

开户银行：

第三条：双方的权利和义务

(一)甲方的权利和义务：

1、甲方有权根据本合同所约定的内容及标准，在不影响乙方工作的前提下检查乙方提供的服务质量，如乙方提供的服务质量不符合本合同的约定，甲方有权要求乙方在指定时间内做出补充或修正。

2、甲方必须依据本合同规定，按时足额向乙方支付服务款项。

3、合同执行过程中，甲方如需变更项目计划，应提前7个工作日以书面形式告知乙方，由于变更所产生的费用及损失由甲方承担，并同意乙方将执行周期予以合理顺延。

(二)乙方的权利和义务：

1、乙方必须按合同约定的服务内容及标准向甲方提供相关服务，对于不符合合同约定的物料、演出、表演等，甲方有权扣减该部分费用。

2、乙方有权要求甲方按其规定提供相关资质证明、产品说明及政府主管部门的审批文件等相关证明材料，甲方拒不提供的，乙方有权拒绝为其执行相关工作，且不承担因前述材料的真实性、有效性及由此造成的任何经济损失。

3、乙方有权要求甲方按时足额支付项目费用。

4、乙方应负责本次活动安全、顺利完成，负责保障自身工作人员、表演人员的人身、财产安全，对因乙方(含乙方表演人员)原因造成的任何人身、财产损失均由乙方负责。

第四条：违约责任

1、乙方应按合同约定时间完成各阶段受托事项，否则，一旦延迟，甲方有权立即单方解除本合同，合同解除后，乙方无权向甲方索取物料、人工等相关支出费用。但甲方书面同意延迟或因甲方原因导致延迟的，乙方不承担违约责任，并应支付乙方相应的经济损失。

2、如甲方未能在本合同约定时间内支付款项，每延迟一天，甲方须向乙方承担迟延支付费用万分之五作为违约金，并将执行周期予以相应顺延。

3、上述违约责任尚不足以弥补守约方直接经济损失的，应补足直接经济损失。

第五条：知识产权

在本合同执行过程中而产生的广告作品著作权甲方所有，即由甲方委托乙方设计制作的广告作品著作权(包括且不限于背景板、喷绘布等)归甲方所有。

第六条：保密

1、双方为执行本协议提供给对方的任何技术产品或资料，除非提供方明确说明其为公知技术的外，均构成提供方的商业秘密;

2、双方同意不得使第三人接触或向第三人揭露上述商业秘密，也不得为本协议之外的任何其它目的利用该商业秘密。双方承诺，本保密义务延及其员工，任何一方员工违法本保密义务的，该方同样应承担全部法律责任。

第七条：免责声明

出现下列情况导致本合同不能履行的，乙方不承担任何责任：

1、由于不可抗力(包括瘟疫、地震、台风、洪水、火灾、战争、罢工、政府禁令以及双方均不可预见、不能控制的事情或情况)导致本协议不能履行的。

2、甲方不正当使用项目产品导致自身及他方损失的。

第八条：争议解决

执行本合同过程中发生争议，应友好协商解决，协商不成的，任何一方可到合同签订地法院提起诉讼。

第九条：其他

1、双方任何通知、文件应以书面形式，并向本合同首页载明地址通过专人或邮递送达，于对方签收或寄出之日起3个工作日(无论对方签收与否)即视为送达。通过传真送达的，传送成功的，即视为送达。

2、本合同以甲乙双方签字盖章之日起为合同生效日。

3、本合同壹式 三 份，甲方执 两 份，乙方执 一 份，具有同等法律效力。

4、本合同执行过程中，所有附件和补充协议等一经甲乙双方签字即成为本合同的有效组成部分，与本合同具有同等法律效力。

5、未尽事宜，双方另行协商。

甲方(盖章)： 乙方(盖章)：

委托代理人： 委托代理人：

签字日期： 年 月 日 签字日期： 年 月 日

证券交易委托代理协议书（二）

第十二条 甲方若已经在其他证券公司办理指定交易，甲方必须在向原指定证券公司办理撤销指定交易后，方可向乙方重新申请办理指定交易。乙方和________银行对甲方因在原指定处办理有关手续不妥而影响在乙方处的正常交易所可能遭致的损失不承担任何责任

第十三条 乙方默认甲方参加每次新股配售，且不承担因申报成功或认购成功而引起的任何责任。

第十四条 甲方承诺其用于接驳_________的电脑系统是安全可靠的，对于因甲方电脑系统故障、感染病毒以及被非法入侵等原因而给甲方造成的损失，乙方和_________银行不承担任何责任。

第十五条 甲方若遗失储蓄卡及对应活期储蓄存折，应按照_________银行的规定办理挂失手续；若股东代码卡遗失，还需向证券登记公司等相关机构办理挂失。在挂失手续生效前产生的损失由甲方承担，乙方和_________银行不承担任何责任。

第十六条 乙方按照法律、法规规定的形式和期限保存甲方的委托记录和交易资料。

第十七条 因地震、台风、火灾、水灾、战争、罢工及其他不可抗力原因导致的甲方损失，乙方和______银行不承担任何赔偿责任

第十八条 乙方按甲方的委托指令向交易所申报，但委托在有效期内因非乙方或非_________银行原因未能成交而造成的甲方损失由甲方自行承担，乙方和_________银行不承担任何责任。

第十九条 因政策重大变化造成的甲方经济损失，由甲方承担，乙方和_________银行不承担任何责任。

第二十条 因不可预测和不可控制的因素以及其他意外原因，致使系统故障、设备故障、通讯故障、停电及出现其他突发事故，给甲方造成损失的，乙方和_________银行不承担任何责任。

第二十一条 乙方及其工作人员提供的所有咨询服务，仅作为投资参考，甲方应以自己的独立判断进行投资。甲方通过乙方进行的任何证券投资所产生的风险和利益，全部由甲方承担，乙方和_________银行不承担任何责任。

第二十二条 因甲方未履行交易交收责任或由于系统故障原因造成甲方透支买入股票的，乙方享有对甲方托管在乙方证券的留置权。甲方在经催告后仍不按照乙方或_________银行通知履行义务或予以赔偿的，乙方和_________银行有权处置与甲方债务相当的证券和资金。当甲方的全部证券和资金不足以抵偿其债务时，乙方和_________银行对甲方保留追索权。

第二十三条 乙方对本协议条款有修改和解释权。若需补充或修改协议条款，则须将新内容以公告形式告知甲方，甲方若有异议应在公告后30天内到原开户点办理相应手续，否则视为甲方接受新内容，并将公告的内容作为本协议不可分割的一部分。

第二十四条 《_________证券交易规定》的修改一经公布即为有效，无须另行通知。

第二十五条 协议双方如有争议，应尽可能通过协商、调解解决。协商、调解不成，双方同意向乙方所在地人民法院提起诉讼。

第二十六条 本协议未尽事宜，由双方协商解决。

第二十七条 本协议一式两份，双方各执一份，具有同等法律效力。本协议自甲、乙双方签字并盖章后生效，在甲方办理_________销户手续后终止。

甲方（盖章）：______________

共3页，当前第2页123

甲方(委托方)：________________

证件类型及编码：_______________

住所：_______________________

电话：_______________________

乙方(受托方)：________________

统一社会信用代码：_________________

住所：_______________________

电话：_______________________

传真：_______________________

甲方因与_________纠纷案，委托乙方参与该案的一审诉讼，为甲方提供相关法律服务。根据《中华人民共和国律师法》、《中华人民共和国民法典》及相关法律、法规之规定，经甲乙双方充分协商，达成下列条款，以资共同遵照履行。

第一条 乙方接受甲方的委托，指派乙方专职律师_________、_________、_________代理该案。

第二条 乙方的代理权限为

1.代为调查、收集案件有关证据;

2.代为申请法庭组成人员回避;

3.代为向法庭陈述案件事实，代为参加法庭辩论及调解，代为变更、放弃诉讼请求，代为提起反诉;

4.代为接受法律文书。

第三条 参照_________市律师收费的有关规定，双方约定，甲方向乙方交纳律师费人民币_________(大写_________)元人民币，自合同签订之日起____日内一次付清。除上诉律师费外，乙方依代理合同办理甲方委托事务而实际支出之必要费用(包括差旅费、住宿费、工本费、通讯费、政府费用及其他必须支出之费用)，由甲方予以实报实销。

甲方按乙方要求将费用划至乙方指定账户：账户名：______________，账户号：____________________，开户银行：___________________。

第四条 甲方应按时支付律师费及相关费用。

第五条 乙方承办律师必须严守律师职业道德，维护甲方委托之当事人的合法权益。

第六条 乙方接受委托后，如发现甲方不履行上述义务或对乙方工作不配合，乙方有权单方解除委托合同，所收预付费用不退，并依其工作时间收取其他律师费用。

第七条 如乙方承办律师不按约定提供法律服务，损害甲方权益的，甲方有权单方解除合同，乙方所收之预付费用如数退还。

第八条 甲方非因第七条原因解除委托合同的，乙方仍有权要求甲方支付不足费用。乙方非因第六条原因解除委托合同的，甲方亦有权要求乙方退还所交之预付费用。

第九条 本合同自甲、乙双方签字盖章之日起生效，非依约定或协商，任何一方不得擅自变更或解除本合同。

第十条 争议的处理

1.本协议的制定、解释及其在执行过程中出现的、或与本协议有关的纠纷之解决，受中华人民共和国现行有效的法律的约束。

2.本合同在履行过程中发生的争议，由双方当事人协商解决，也可由有关部门调解;协商或调解不成的，按下列第____种方式解决(只能选择一种)：

(1)提交________仲裁委员会仲裁;

(2)依法向________人民法院起诉。

第十一条 本合同一式_________份，甲方执_________份，乙方执_________份，具同等法律效力。

甲方(签章)：________________乙方(签章)： _______________

法定代表人(签章)：__________法定代表人(签章)：__________

委托代理人(签章)：__________委托代理人(签章)：__________

_________年_______月_______日_________年_______月_______日

独家销售代理协议

甲乙双方在平等互利、共同发展的基础上签订本协议，并达成条款如下：

1.合同当事人：

供货人：_________公司（以下简称甲方）

代理人：_________公司（以下简称乙方）

2.商品及数量：

甲方委任乙方为_________商品的独家销售代理人。乙方保证在协议期间销售上述商品不少于_________（数量或金额）。

3.销售地区：

以_________地区为限。

4.订单的确认：

协议商品的有关数量、价格和运输期，应在逐笔交易中确认，其细节详见甲方销货确认书。

5.付款：（选择下列方式）

（1）在订单确认后，乙方应于有关销货确认书规定的时间内，安排开立以甲方为受益人的、百分之百金额的，不可撤销的即期信用证，并于开证后立即通知甲方以便由_________方准备装运。

（2）_________。

6.佣金：

甲方于收妥货款后，按每批货物发票价值的百分之_________向乙方汇付佣金。

7.市场情况报告：

乙方有义务每三个月向甲方寄送一次详细的报告，反映当地的市场情况和消费者意见。乙方还应随时将其他供货人所报同样商品的样品，连同其价格、销售情况、广告资料等寄给甲方参考。

8.广告宣传费用：

乙方应负担协议期间在上述地区的一切广告宣传费用。所有用作广告宣传的和必须送交甲方取得事前同意。

9.协议有效期：

本协议经有关双方签字后保持有效_________年，从_________年_________月_________日起至_________年_________月_________日止，如果一方需要，延长协议必须在满期前一个月书面通知另一方。如果一方未能履行协议条款，另一方有权终止本协议。

10.仲裁：

凡因本合同或与本合同有关的一切争议，应通过双方协商解决。如协商不成，应提交中国国际经济贸易仲裁委员，按其仲裁规则在深圳进行仲裁。仲裁裁决是终局的，对双方均有约束力。

11.其他条款：

（1）甲方不应向上述地区的其他客户供应协议商品，如有任何直接询盘均要转给乙方。但是，如有任何客户坚持要与甲方直接交易，甲方有权直接成交。在后一情况下，甲方应送乙方销货确认书副本一份，并按该笔交易标的净值的百分之_________为乙方保留佣金。

（2）乙方未能在_________月之内向甲方寄送至少_________（数量或金额）的订单，则甲方不再受本协议的约束。

〖您正浏览的文章由第一＇范文网www.diYifanwen.com整理，版权归原作者、原出处所有。〗

（3）对于双方政府间的交易，甲方有权按其政府授权直接成交而不受本协议的约束。乙方不应干涉这种直接交易，也不应对此提出索赔或佣金的要求。

（4）其他条款应以双方签订的正式销售货确认书为准。

本协议一式四份，双方各执两份。

甲方（供货人）（盖章）：_________ 乙方（代理人）（盖章）：_________

代表（签字）：_________ 代表（签字）：_________

_________年____月____日 _________年____月____日

签订地点：_________ 签订地点：_________

设备销售代理协议书

甲方：_____技术有限公司

乙方：

为保证_____技术有限公司生产经营的医疗废弃物集中处理系统，医疗垃圾处理设备，工业废弃物处理设备，工业区废弃物集中处理系统，工业危险废弃物处理系统，城市生活垃圾集中处理系统，各类垃圾前分选系统，建筑废弃物综合再利用系统，航空废弃物处理系统，高危险废弃物处理系统，化工、制药工业废弃物处理系统，特种废弃物焚化系统，废液、废溶剂专用焚化系统，污泥、废渣专用焚化系统顺利推广、销售，本着公平、双赢的原则，经甲、乙双方友好协商，达成如下协议：

一、乙方负责代理项目及价格：

1.代理项目：

甲方正式授予乙方代理_____技术有限公司项目设备销售的代理权，负责该项目的销售工作。

2.乙方代理的设备型号为________设备价格（大写）：_____________________

配置见附件。

二、设备销售货款支付方式：

1.设备销售货款支付方式：

（1）付款时间：合同签订后的三个工作日内支付合同总金额的 60 %，货到交货地点三个工作日内支付合同总金额的 30 %，设备安装调试完毕三个工作日内付清合同总金额的 10 %。

（2）付款方式：最终用户需将设备销售款直接打入甲方指定账户。当甲方收到货款90%后，甲方在一周内按约定价格支付乙方的佣金，乙方提供代理酬金发票。

（3）甲方开户行：中国建设银行 北京前门支行，账号： 。

三、甲、乙双方权利与责任

1、甲方在技术上全力配合乙方工作，但在项目运作的整个周期内所产生的费用均由乙方负责；

2、按公司提供的价格出售的设备，项目代理有40%的利益，在公司提供的价格上打折后出售的设备，打折部分由代理商自行承担。

3、如甲方没有按时、足额收到设备销售款，甲方有权延缓支付乙方相应佣金，乙方有义务负责对购买设备方的销售款进行追缴。

4、乙方在负责甲方授权项目销售、推广过程中产生的一切债务、债权和一切经济纠纷均与甲方无关，由乙方独立承担其全部相关法律责任；

5、乙方在负责甲方授权项目销售过程中，不得有做出不利于正当市场竞争的行为，不得做出不利于甲方对外形象及甲方利益的行为，否则，甲方有权随时终止协议约定内容。

6、乙方必须遵守总公司的《技术保密协定》、《知识产权保护合同》及《项目代理协议》等相应协议的所有条款。

7、本协议所签内容未经甲方同意，乙方不得转让他方；

四、签署相关协议

甲、乙双方必须签署"ceco商标及知识产权保护协定"和"ceco知识产权保护合同"，上述两协议必须与本协议同时签署方能生效且与本协议具有同等法律效力。

五、协议期限及签署地点

1、协议期限：本协议签字盖章之日生效，有效期壹年，此前所签协议作废；

2、本协议的签订地点：北京市建内大街7号光华长安大厦2座11层。

六、协议的中止

1、乙方在代理期间，做出任何违反甲方管理规定或有损甲方形象和利益的行为，甲方有权单方面中止与乙方签订的本代理协议；

2、乙方不得有擅自出售、抵押、许可、泄漏甲方知识产权的行为，否则甲方有权单方面中止与乙方签订的本代理协议同时追究乙方的法律责任；

共2页，当前第1页12

委托设计协议书

协议编号：___________

甲方：_____________________________

乙方：_____________________________

现就甲方所委托的_________设计事项，乙方接受设计委托，就委托设计事项，双方经协商一致，并依据《中华人民共和国合同法》，签订本协议，双方承诺信守执行：

一、委托事项

_______________________________________________________

二、付款方式

1.甲方需在协议签订之日起两个工作日内将委托设计总费用的_______％付给乙方，原则上，乙方收到甲方的款项后作为设计的开始时间。

2.设计完成后，甲方需在三天内签名或盖章确认（以传真方式确认同样有效），确认后甲方应即付清设计费用的全部余款。

三、设计的时间根据本协议附件1的设计套餐内容和相对应的工作方式，甲方选定委托设计形式，按照甲方所选，乙方应在_____个工作日内，遵照甲方对委托设计所提出的意向和理念设计出初稿并交于甲方审定，在甲方审定意见基础上，乙方应在_______工作日内完成终稿设计（由甲方原因耽误的时间，完稿时间应顺延）。

四、知识产权约定

1.乙方对设计完成的作品享有著作权，甲方在将委托设计的所有费用结算给乙方后，乙方所设计的作品的著作权将自动转给甲方。

2.甲方在余款未付清之前对该作品不享有任何权利，甲方在余款未付清之前如擅自使用或者修改使用乙方设计的作品而导致的侵权，乙方有权依据《中华人民共和国著作权法》追究其法律责任。

3.未被甲方采用的设计方案，知识产权仍归乙方。

五、双方的权利义务

甲方义务：

1.甲方按照协议约定支付相关费用；

2.甲方有义务提供有关企业资料或其他有关资料给乙方；

甲方权利：

1.在乙方设计初稿之前，甲方有权对乙方的设计提出建议和思路，以使乙方设计的作品更符合甲方企业文化内涵。

2.在乙方设计初稿之后、和在按甲方选定的委托设计形式中规定的设计流程中，甲方有权对乙方所设计的作品提出修改意见；

乙方义务：

1.乙方需 按照甲方的要求进行作品设计。

2.乙方需按照协议约定按时交付设计作品。

乙方权利：

1.乙方有权要求甲方提供有关企业资料供乙方设计参考；

2.乙方有权要求甲方按照协议约定支付相应款项；

3.乙方有权要求甲方在未付清款项之前不得使用该设计作品。

六、违约责任

1.甲方在乙方已开始展开委托设计、但设计作品初稿完成之前单方面终止协议的，所预付的费用无权要求退回；甲方在乙方委托设计作品初稿完成后单方面终止协议的，应当支付全额的设计费用。

2.乙方如无正当理由提前终止协议，所收取的费用应当全部退回给甲方。

七、不可抗力因素

甲乙任何一方由于不可抗力，不能履行协议时，由双方协商解决，确实无法调节，则由仲裁机关或根据合同法办理。

八、协议生效

本协议需由甲乙双方签字盖章，以双方最后签字日期为生效日；

本协议一式两份，甲乙双方各持对方签字（盖章）协议一份，均具有同等法律效力；

本协议附件具有同等效应；协议未尽事宜，由甲乙双方协商解决。

甲方（盖章）：_____________ 乙方（盖章）：____________

共2页，当前第1页12

甲方： 乙方：

地址： 地址：

邮编： 邮编：

甲方与乙方本着互惠互利的合作原则，共同开发A&M品牌系列产品的湖南销售市场，同意乙方在经授权的地区代理销售A&M品牌系列产品，特此签订以下协议：

1、甲方拥有“A&M”品牌系列产品的经营权。

2、甲方现授予乙方为 地区的(总分)代理商，进入商场营销、开设专卖店、承揽团体工作服，甲方按协议维护乙方的经营代理权;乙方在经营过程中所发生的债权债务与甲方无关，乙方在经营过程中如发生违法违规，乙方承担一切责任，也与甲方无关。

3、乙方同时需向甲方先交付 元的提货保证金，并取得区域代理资格。协议签订后，如乙方三个月内尚未履行合同进行代理开业，甲方有权扣没提货保证金，同时甲方不再保留乙方的代理权。如乙方无违约行为，提货保证金在合同期满甲方退还给乙方。

4、区域代理授权成立后，甲方为乙方提供零售、经营、专卖等有效的授权文书，指定经营证书及相关的品牌宣传品、店面设计方案等，然后开展正常的代理经营。乙方在甲方授权地销售“A&M”品牌系列产品之营业执照及其它相关证件手续，概由乙方自行解决，费用由乙方承担。

5、甲方授权予乙方后，乙方须专业经营，不可将授权商品销售至授权地区以外，进行跨区域经营;亦不可将授权商品销售予有可能将该商品销售至非授权地区的第三者。

6、甲方认定乙方的代理能力、信誉和经济实力等出现问题，有确定乙方代理资格与否的权限。其情形具体如下：

A.超越代理区域、跨地区经营，或擅自转让代理权的。

B.经营不善，未能完成约定的计划经营指标(批发进货数)。

C.违法违规经营，对A&M品牌造成损害的。

D.私自组织货源，经销假冒A&M品牌的。

E.泄露A&M品牌的各种商务机密，经认定造成损害的。

F.由于经营工作能力和工作信誉等原因，无法再承担代理工作的。

甲方在收回代理权后，乙方除B点所述外的一切有关经济情况和责任全部自负。如B点所述状况发生，甲方对乙方所库存的货品的 % 以原代理批发价收回(乙方定制产品，甲方处理批发产品，影响甲方第二次销售的产品除外)。

7、甲方与乙方确定的年度销售指标为 万元(代理批发价)。其中包括计划完成销售：商场( 个专厅)等商业零售预计 万元、开设专卖店( 间)销售预计 万元，合计商业零售 万元。若乙方6个月内未完成合同销售汇款指标 的 %，甲方有权提前取消乙方的代理权。

8、乙方完成年度指标后，甲方同意对完成零售指标的代理业绩按相应的比例设定奖金，奖励给乙方，奖励在年度核算后兑付，同时乙方预留奖金中的 %作为第二年度的代理货款，如乙方违约，甲方扣没此预留费用。乙方被取消代理资格、未完成销售指标及其它违约情况等，都不得享受年度奖励奖金。

奖励比例如下：

完成销售 万元以上、 万元以下为 %

完成销售 万元以上、 万元以下为 %

完成销售 万元以上、 万元以下为 %

以此类推，每增加 万元的销售，奖励系数将增加 个百分点，但最高奖励比例为 %。

9、乙方以买断方式代理销售，所需产品进货需带款提货。甲方以公司的批发价(不含税价)供货，甲方建议乙方确定相应的零售价，并以当地同类品牌产品的市场基价作参考进行销售。

10、产品质量按甲方对消费购买所承诺的规定办理或参照国家有关消费者保护法等规定。

11、销售产品的换货：允许部分产品拆套销售，遇断码，号型不全不齐，甲方负责以确定的日期调换(一般确定在农历12月30日、公历4月30日前，两次调换)，但甲方处理批发的产品、乙方定制产品、影响甲方第二次销售的产品除外。甲方允许乙方按到款额(汇至甲方的货款)10%的比例进行隔季产品换货。销售中如发现产品确属甲方特殊生产制作原因的，不列入换货率之中，甲方当予调换。所有换货之产品，乙方须事前申报甲方，待甲方书面确认后尚可发回换货之产品。

12、甲方提供乙方的广告费用，按乙方汇甲方货款的 %比例支援(考虑乙方市场开拓，甲方亦可考虑提前投入广告宣传，但费用计入乙方的广告费总额内)。广告投入前，乙方须提前通报甲方，经甲方同意后签订合同，与发票一起供甲方备案。

13、乙方如进行授权区域内之大型商场销售甲方授权产品，需设立专厅其装潢费及专卖店装修费用由乙方自行负担。

14、乙方在授权区域内，有义务协同配合甲方维护甲方所拥有的品牌，防范抵御各种有损品牌形象的不法行为，及时向甲方反馈市场动态。品牌维权之法律费用由法律行动发起者负责，甲方当全力支持。

16、本协议有效日期为 年 月 日至 年 月 日。未经甲方事先书面同意，乙方于任何情况下，不能将本约所赋予之权利全部或部分转让予第三人。

17、本协议一式四份，双方各执两份，共同遵守约定，任何方的违约，都将承担法律责任，承担由此引起的一切经济损失责任，并补偿给对方。

18、本合同未尽事宜，由甲乙双方协商解决。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

合同编号：

需货方： (以下简称甲方) 供货方：  (以下简称乙方)

甲乙双方本着以诚为本、互惠互利的原则，经双方协商一致，根据《中华人民共和国经济法》的规定，订立合同如下：

第一条、产品使用项目：

第二条、产品：

第三条、供货日期：从 年 月 日起至本工程竣工完成日止。期间送货以甲方通知为准(需提前三天通知)。

第四条、质量要求：乙方在甲方用货前提供货物样品，由乙方提供产品合格证，并提供检测报告给甲方存档，乙方供给甲方同样质量的产品。乙方必须保证原材料为合格产品。

第五条、货款及费用等付款及结算办法：

1、交货方式：所有货物由乙方送往甲乙双方共同约定的交货地点，所需运输费用由乙方承担，并由甲方负责卸车。

2、交货地点：

3、结算方式：

第六条 经济责任

(一)乙方应负的经济责任

1、产品品种、规格、质量不符合本合同规定时，甲方同意利用者，按质论价。不能利用的，乙方应负责包退、包换。由于上述原因延误交货时间，每逾期一日，乙方应按逾期交货部分货款总值的万分之三计算向需方偿付逾期交货的违约金。

2、乙方示按本合同规定的产品数量交货时，少交的部分，甲方如果需要，应照数补交。如甲方需要而乙方不能交货，则乙方应付给甲方不能交货部分货款总值的5%的罚金。

(二)甲方应负的经济责任

1、乙方供货无误的前提下，如甲方中途退货或使用其它同类产品，甲方应赔偿本合同总金额5%给共方作为违约金。

2、甲方如未按规定日期向供方付款，每延期一天，应按延期付款总额每日百分之一计算付给乙方，作为延期罚金。

第七条 产品价格如须调整，必须经双方协商后方能变更。

第八条 如甲方须变更产品品种、规格、质量、包装时，应提前 天与供方协商。 第九条 本合同所订一切条款，任何一方不得擅自变更或修改。如一方单独变更、修改本合同，对方有权拒绝生产或收货，并要求单独变更、修改合同的一方赔偿一切损失。

第十条 任何一方如确因不可抗力的原因，不能履行本合同时，应及时向对方通知不能履行或须延期履行、部分履行合同的理由。在取得对方同意后，本合同可以不履行或延期履行或部分履行，并免予承担违约责任。

第十一条 本合同在执行中如发生争议或纠纷，甲、乙双方应协商解决，如协商不成，甲乙双方均可向合同签订地人民法院提起诉讼。

第十二条本合同自双方签章之日起生效，到乙方将全部订货送齐经甲方验收无误，并按本合同规定将货款结算以后作废。

第十三条本合同在执行期间，如有未尽事宜，由甲乙双方协商另行签订补充协议，补充协议与本合同有同等效力。

第十四条本合同一式 贰 份，由甲、乙双方各执 壹 份。

甲 方： (盖章) 经 办 人： 电 话： 开户银行： 账 号：

年月日

乙方： (盖章)负 责 人： 电 话： 开户银行： 账 号：

年月日：

房屋出租委托代理合同【最新范本】

委托合同是指受托人为委托人办理委托事务，委托人支付约定报酬或不支付报酬的合同。

1.委托人应当预付处理委托事务的费用。受托人为处理委托事务垫付的必要费用，委托人应当偿还该费用及其利息。受托人完成委托事务的，委托人应当向其支付报酬。

2.有偿的委托合同，因受托人的过错给委托人造成损失的，委托人可以要求赔偿损失。无偿的委托合同，因受托人的故意或者重大过失给委托人造成损失的，委托人可以要求赔偿损失。受托人超越权限给委托人造成损失的，应当赔偿损失。

3.委托人经受托人同意，可以在受托人之外委托第三人处理委托事务。因此给受托人造成损失的，受托人可以向委托人要求赔偿损失。

4.受托人完成委托事务的，委托人应当向其支付报酬。因不可归责于受托人的事由，委托合同解除或者委托事务不能完成的，委托人应当向受托人支付相应的报酬。当事人另有约定的，按照其约定。

5.受托人应当亲自处理委托事务。经委托人同意，受托人可以转委托。转委托经同意的，委托人可以就委托事务直接指示转委托的第三人，受托人仅就第三人的选任及其对第三人的指示承担责任。转委托未经同意的，受托人应当对转委托的第三人的行为承担责任，但在紧急情况下受托人为维护委托人的利益需要转委托的除外。

6.委托人或者受托人可以随时解除委托合同。因解除合同给对方造成损失的，除不可归责于该当事人的事由以外，应当赔偿损失。

房屋出租委托代理合同【最新范本】

委托人(甲方)：__________证件类型及编号：____________________

租赁代理机构(乙方)：__________备案证明编号：__________________

依据《中华人民共和国合同法》及有关法律、法规的规定，甲乙双方在平等、自愿的基础上，就房屋出租委托代理的有关事宜达成协议如下：

第一条 房屋基本情况

(一)房屋坐落于______市______区(县)_________街道办事处(乡镇)_____________________________________，建筑面积______平方米。

(二)房屋权属状况：甲方持有(□房屋所有权证/□公有住房租赁合同/□房屋买卖合同/□其他房屋来源证明文件)，房屋所有权证书编号：_____________________或房屋来源证明名称：______________________，房屋所有权人(公有住房承租人、购房人)姓名或名称：_______________房屋(□是/□否)已设定抵押(出租房屋信息登记表见附件一)。

第二条 房屋租赁用途

租赁用途：_________;如租赁用途为居住的，居住人数不得多于____人。

第三条 出租代理权限及期限

(一)乙方出租代理权限为：□代甲方出租房屋并办理与承租人之间的洽商、联络、签约事宜;□代甲方办理与房屋租赁有关的备案、登记手续;□代甲方向承租人收取租金;□代甲方向税务部门缴纳税费;□监督承租人按照房屋租赁合同的约定履行义务;_____________________

(二)出租代理期自_____年_____月_____日至_____年_____月_____日，共计_____年_____个月。出租代理期限可延长 (□日/□月)。

(三)甲方应于_____年_____月_____日前将房屋交付给乙方，《房屋交割清单》见附件二。

(四)出租委托代理期限届满或本合同终止后，乙方应将房屋交回。

第四条 租金

(一)租金标准：_____元/(□月/□季/□半年/□年)，租金总计：人民币__________元整(￥：_______________)。

(二)租金收取方式：甲方在____________银行开设账户，账号为___________________;乙方在____________银行开设房屋租赁代理租金专用账户(该账户信息可通过房地产中介行业协会网站和建设网查询)，账号为：________________________，乙方通过该账户收取租金并按约定划入甲方账户。

(三)乙方将各期租金划入甲方账户的日期:___________ ，___________， _______________________________________________________________。

第五条 佣金及相关服务费用

甲方向乙方支付的费用标准、计算方式及关于装修、家具电器等有关费用约定见附件三。

第六条 押金

甲方交付房屋时，乙方(□是/□否)向甲方垫付押金，金额为人民币_______________元整(￥：_______________)。出租委托代理期限届满或合同解除后，押金除抵扣应由乙方或承租方承担的费用、租金及违约赔偿责任外，剩余部分应如数返还乙方。

第七条 其他费用

出租委托代理期限内，甲方不承担与房屋有关的下列费用_____________：

(1)水费(2)电费(3)电话费(4)电视收视费(5)供暖费(6)燃气费(7)物业管理费(8)房屋租赁税费(9)卫生费(10)上网费(11)车位费(12)室内设施维修费(13)其他费用__________________。本合同中未列明的与房屋有关的其他费用均由甲方承担。如乙方或承租人垫付了应由甲方支付的费用，甲方应根据相关缴费凭据返还相应费用。

第八条 房屋及附属设施的维护

(一)出租委托代理期限内房屋及其附属物品、设备设施的维修责任：甲方负责________________________;乙方负责_______________________。

(二)甲方(□是/□否)允许乙方或承租方对房屋进行装修、装饰或添置新物。对房屋进行装修、装饰或添置新物的具体事宜见附件三。

第九条 转委托

出租代理期限内，未经甲方书面许可，乙方不得将代理事宜全部或部分转委托给他人。

第十条 合同的解除

(一)经甲乙双方协商一致，可以终止本合同。

(二)出现任何不可抗力的情形导致本合同无法继续履行的，本合同自行解除。

(三)甲方有下列情形之一的，乙方有权单方解除合同：

1、迟延交付房屋达________日的。

2、交付的房屋严重不符合合同约定或影响承租人安全、健康的。

3、不承担约定的维修义务致使乙方无法出租房屋的。

4、____________________________________________________________。

(四)乙方有下列情形之一的，甲方有权单方解除合同：

1、未按约定划付租金达________日以上的。

2、擅自改变房屋用途的。

3、擅自拆改变动或损坏房屋主体结构的。

4、保管不当或不合理使用导致附属物品、设备设施损坏并拒不赔偿的。

5、利用房屋从事违法活动、损害公共利益或者妨碍他人正常工作、生活的。

6、放任承租方的上述行为的。

7、____________________________________________________________。

(五)其他法定的合同解除情形。

第十一条 违约责任

(一)出租代理期内甲方或乙方需提前终止合同的，应提前________日通知对方，并按月租金的 ________%支付违约金。

(二)甲方有第十条第三款情形之一的，应按月租金的________%向乙方支付违约金。

(三)乙方有第十条第四款情形之一的，应按月租金的________%向甲方支付违约金，甲方并可要求乙方将房屋恢复原状或赔偿相应损失。因乙方前述行为导致甲方被有关行政机关处罚的，甲方可向乙方追偿。

(四)________________________________________________________。

第十二条 合同争议的解决办法

本合同项下发生的争议，由双方当事人协商解决;协商不成的，依法向有管辖权的人民法院起诉，或按照另行达成的仲裁条款或仲裁协议申请仲裁。

第十三条 其他约定事项

_______________________________________________________________

_______________________________________________________________

_______________________________________________________________。

第十四条 合同生效

本合同经甲乙双方签字盖章后生效。本合同(及附件)一式________份，其中甲方执_______份，乙方执_______份，______________执_______份。

本合同生效后，甲乙双方对合同内容的变更或补充应采取书面形式，作为本合同的附件。附件与本合同具有同等的法律效力。

委托人(甲方)签章： 租赁代理机构(乙方)签章：

联系电话： 联系电话：

委托代理人： 备案证明编号：

经纪人签字：

资格注册证书编号：

年 月 日 年 月 日