玻璃制品出口好做吗(热门20篇)

一般货物出口合同格式

合同号：

日 期：

订单号：

买方：

卖方：

买卖双方签订本合同并同意按下列条款进行交易：

（1）品名及规格

（2）数量

（3）单价

（4）金额

合计

允许溢短装＿＿＿＿＿％

（5）包装：

（6）装运口岸：

（7）目的口岸：

（8）装船标记：

（9）装运期限：收到可以转船及分批装运之信用证＿＿＿＿＿天内装出。

（10）付款条件：开给我方100％保兑的不可撤回即期付款之信用证，并

须注明可在装运日期后15天内议付有效。

（11）保险：按发票110％保全险及战争险。

由客户自理。

（12）买方须于＿＿＿年＿＿＿月＿＿＿日前开出本批交易信用证，否则，

售方有权：不经通知取消本合同，或接受买方对本约未执行的全部或一部，或对因

此遭受的损失提出索赔。

（13）单据：卖方应向议付银行提供已装船清洁提单、发票、中国商品检验

局或工厂出具的品质证明、中国商品检验局出具的数量/重量签定书；如果本合同

按CIF条件，应再提供可转让的保险单或保险凭证。

（14）凡以CIF条件成交的业务，保额为发票价值的110％，投保险别

以本售货合同中所开列的为限，买方如要求增加保额或保险范围，应于装船前经售

方同意，因此而增加的保险费由买方负责。

（15）质量、数量索赔：如交货质量不符，买方须于货物到达目的港30日

内提出索赔；数量索赔须于货物到达目的港15日内提出。对由于保险公司、船公

司和其它转运单位或邮政部门造成的损失卖方不承担责任。

（16）本合同内所述全部或部份商品，如因人力不可抗拒的原因，以致不能

履约或延迟交货，售方概不负责。

（17）仲裁：凡因执行本合同或与本合同有关事故所发生的一切争执，应由

双方通过友好方式协商解决。如果不能取得协议时，则在中国国际经济贸易仲裁委

员会根据该仲裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的，对双方具有同

等约束力。仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。仲裁也可在双

方同意的第三国进行。

（18）买方在开给售方的信用证上请填注本确认书号码。

（19）其它条款：

卖方： 买方：

贷款人：___________________________

法定地址：_________________________

借款人：___________________________

法定地址：_________________________

贷款人和借款就借款人以信用证为抵押向贷款人申请外汇贷款一事共同协商签订合同如下：

1.双方同意以下定义

1.1?信用证：由_________________银行开出通过________________通知编号为________________的______________信用证。

1.2?债务：指借款人在本合同项下应付的贷款本金、利息及与此有关费用。

2.贷款金额、币种和用途

2.1?本合同贷款金额的最高额为（大写）___________________________，（币种）_____________________。

2.2?本合同项下贷款限于借款人正常生产经营所需流动资金。

3.期限

3.1?本合同项下的贷款期限从合同签订日起_______________个月。

4.利息与费用

4.1?本合同项下的贷款利率为___________________________。

4.2?贷款从第一笔提款日起息，利息以一年360天为基础，根据实际经过的天数计算。

4.3?贷款的结息日为每季第三个月的20日和贷款到期日。

4.4?借款人到期应付利息由贷款人主动从借款人开立在贷款人处的存款账户内扣收。

5.信用证的抵押和还款

5.1?本合同签订之日起，借款人将1.1条款下的信用证正本抵押给贷款人并由贷款人保管，作为贷款的还款保证。

5.2?在提交单据后，借款人保证叙做出口押汇并授权贷款人将押汇收入直接用于归还贷款。

6.陈述与保证

借款人在此作如下陈述与保证。

6.1?借款人是从事商务经营和有民事行为能力的经济法人，按中华人民共和国法律登记、注册，具有执行、履行所有民事行为的能力。

6.2?本合同的制定、签署、执行符合借款人所在地的法律、法规、条令、制度。借款人已办妥所有签署本合同的合法有效的手续。

6.3?保证根据出口信用证条款的要求按时发运货物，履行信用证规定的各项义务。

6.4?保证及时将抵押信用证规定的出口单据向贷款人提交议付。

6.5?按时支付利息和归还贷款。

6.6?保证按本合同2.2条款规定的用途使用贷款。

7.违约

下列事件属于违约

7.1?借款人未按信用证规定的日期内运出商品。

7.2?借款人在本合同第6条中所做的陈述与保证不真实或不履行。

7.3?借款人将抵押信用证项下的单据向别的金融机构议付。

7.4?借款人擅自改变贷款用途，挪用贷款。

7.5?借款人发生或将要发生_____、重组破产。

7.6?借款人违反本合同其他条款。

8.违约的处理

8.2?在这种情况下，贷款人有权采取以下部分或全部措施：

A.对违约金额处以20%～50%的罚息。

B.宣布部分或全部贷款到期，主动从借款人账户中扣还贷款及其他费用。

C.冻结借款人在贷款人处的存款户，如借款人的债务没有得到全部清偿，贷款人保留进一步追偿的权利。

9.其他

9.1?本合同在贷款人和借款人签字盖章后生效，有效期至借款人在本合同项下全部债务清偿后为止。

9.2?本合同受中华人民共和国法律管辖。

9.3?本合同中文正本一式2份，签约双方各执1份。

贷款人：______________（公章）

授权人：______________（签字）

借款人：______________（公章）

授权人：______________（签字）

签订日期：____________________

刚到公司，前两个月比较茫然，但我一心想着把工作做好，进入工作状态。初来乍到，学习是非常重要的，当然外贸部优秀的同事给了我不少帮助，从熟悉产品到开发新客户，一步步走来，过程虽然艰辛，但结果总是给人鼓舞。通过一系列的培训，产品知识，到电话营销，我知道了作为一个外贸业务员如何开始工作，进入状态，取得订单。开始的两个月，没有任何平台，这是公司对我的考验，也是我自己对自己的考验。就如野外拓展中的"空中抓杠"，只有克服自我，才能真正的成功。到第二个月，从网上大海捞针，到最后重点客户培养，最终出了样品单，虽然金额不多，但是却给了我信心。总结这一单，最重要的是客户积累，培养重点。这一点要得益于平时戴总让我们做客户档案，分析客户，并保持和客户联系的状态。只有这样才清楚自己目前客户的联系状态，进而掌握订单的状态。

2.从二月份拿到阿里账号，我工作上了一个新的台阶。这里想感谢公司给我这样一个可利用的优质平台，让我客户资源很快上升，并学会如何处理询盘，跟踪客户，并达成订单。三月份太阳能热水器客户开始积累，并取得南非客户的样品单，目前对方还在测试阶段，订单大概要8月份才能确定。总结这一单，并没有什么诀窍可言，最重要的是跟紧客户。虽然只是几百美金的样品单，但是在这个客户身上花了很大心血，记得2月底至3月份每天晚上都会和客户聊天聊到很晚，一般是客户提醒我该休息了，我才下线.正因为如此，客户才如期参观工厂，并顺利下样品单。总而言之，跟客户的感情是需要长期培养，关系好了，机会自然就多了。

3.4月和5月，我个人的业务都处于低谷期，太阳能电池板的样品单出了4个，热水器出了一个样品单。这段时间，可以说还是处于摸索状态，出单心急，所以每碰到一个客户，我都会花大量的时间和精力对付，也许是白费心思，但觉得是值得的，因为经过这段过程，我能够更好的判断客户的心理状态，判断客户下单的可能性有几成，哪些客户是优质客户。6月份下单的美国affordable solar也是这段时间培养出来的，时间虽然很长，但是最终我看准了这个客户，而且认定是优质客户，终于经过2个多月时间，定金顺利到账。总结这段时间我的付出，当然很多是不值得的，比如有些客户是考察市场，观望行情，这样的客户可以不用花太多的精力，这样的客户不仅难缠，而且很麻烦，问题一大堆，你要不停为他搜集信息，解答问题，到最后，他也不会下单，然后消失。像这样的客户要等他的订单，估计要一年或者两年时间。而美国客户，他问题也很多，根据我的判断，他有单，所以我会很耐心，很细致为他一一解答;因为他有单，我几乎每周都会打电话询问情况，并记录对方的进展，到最后的程度是，对方一接到我电话，听到我的声音，就知道我是浙江华锦的tracy，这个时侯，我就肯定，这个客户下单，一定会下给我。当然结果也是这样的。

4.6月份，询盘很少，新客户的开发也就比较少，有两三个客户可能会下样品单。同时，跟老客户保持着紧密联系，尤其是出过样品单的客户。可以说，经过半年，我工作进入状态了，老客户差不多积累起来了，只是需要维护好，让样品单客户尽快翻单。同时，客户订单下了之后，配合其他部门，将客户要求反馈给采购部，生产部，以确保订单准时并无差错，赢得客户!

上半年的工作总结大致如综上所述，虽然上半年总的销售额并不理想，主要是因为我客户资源有限，很多客户还处于培养阶段，而下单的客户也都是样品单，样品单金额一般都比较低，这就导致销售额比较低。对于下半年的工作我很有信心，也希望公司对我有信心。

会上我也给自己定了目标，这个目标是要用行动去实现的，而不是空谈。下半年总目标是12万美金。很难细化，每个月能做多少，但是我相信，如果样品单客户维护好，继续翻单，这个任务并不难，甚至可以做得更好。

1、负责阿里巴巴平台的推广(服装方向)，发布产品，关键词的优化及P4P推广等，增加曝光量，点击率，询盘数量;

2、负责公司阿里巴巴平台的销售(服装方向)，处理客户的咨询、报价，与客户沟通、了解客户需求，处理客户投诉，规划客户服务方案;

3、与客户谈判，达成订单的签定及货款的处理;

4、负责及时跟进货品的发货动向、交付跟进等相关事项;

5、负责相关市场信息的收集，销售数据整理;

6、利用国内外各类展会和网络平台，开拓市场，开发客户;

7、定期或不定期进行回访客户，维护良好的客户关系，挖掘客户新需求;

8、负责客户档案、质量跟踪记录等售后服务信息的整理、归档;

9、完成公司安排的其他临时关工作。

时光飞逝，一转眼我从学校步入社会实习工作已经有两三个月的时间了，在工作中，我本着严以律己的思想，认真对待和做好每一项工作。与工作相关的事上，不懂则虚心向同事请教，不断的提高和充实自己，同事也提高自己的工作效率。作为一个应届毕业生，初来公司，曾经很担心不知该怎么与人共处，该如何做好工作;但是公司宽松融洽的工作氛围、团结向上的精神，让我很快完成了从学生到职员的转变。

两三个月，虽说不长也不短，在这段时间里我学到了不少。刚开始的一周，许多事情都是云里雾里，自己也很迷茫，但随着同事的指导，我渐渐步入正轨，一开始就是按着指示做事，自己思考较少，后来随着事情多了起来，开始懂得如何好好安排自己的工作，做好计划，按着计划一步一步来完成工作。为自己列一个计划来行事用许多好处，一来起到统筹规划的作用，二来按部就班的做事，才能把事情做到井井有条，同时也提醒着自己当天的事要当天完成，提高了工作效率。

每天上班的第一件事就是查看邮件，看看有没有客人的最新回复或询盘，如果有新询盘第一时间反馈给采购，让采购及时报价以便在尽快的时间内回复给客人。若是客人的回复，则继续跟进，回复客人的邮件。跟进询盘时，根据客人的需求向客人发送产品照片推荐产品。

在开发客人这一工作上，我在一个多月的时间内接到了第一张订单，能接到这张订单，我要非常感谢我的同事们对我的帮助，没有他们耐心细心的指导和帮助，单凭我一人在没有实践经验的情况下是无法做到的。都说外贸是长跑，有些人跑了很久仍无法跑出成绩。而我在一个多月的时间内小有成绩，这笔订单着实鼓舞着我再接再厉，长跑仍未结束，还需要不骄不躁，沉得住气，静下心来，好好对待每一位客人，认真回复好每一封邮件。对每一位客人及时进行总结，在开发客人时或订单进行时要处于主动位置，带领着客人朝我们预期的路线走，而不是被动的等待客人指定要做什么。

初入职场，许多不懂的事情仍需前辈指导;各种经历也让我不断成熟，在处理各种问题时考虑得更全面，避免不必要的失误发生。同时我也认识到自己还有许多不足之处，深知自己还有许多需要努力学习的地方。我会在日后的工作中继续学习，与同事同行不断交流和总结经验。

合同号码：

签约日期：

买方： 卖方：

本合同由买卖双方缔结，用中、英文字写成，两种文体具有同等效力，按照下述条款，卖方同意售出买方同意购进以下商品：

「章名」 第一部分

1.商品名称及规格

2.生产国别及制造厂商

3.单价(包装费用包括在内)

4.数量

5.总值

6.包装(适合海洋运输)

7.保险(除非另有协议，保险均由买方负责)

8.装船时间

9.装运口岸

10.目的口岸

11.装运唛头，卖方负责在每件货物上用牢固的不褪色的颜料明显地刷印或标明下述唛头，以及目的口岸、件号、毛重和净重、尺码和其它买方要求的标记。如系危险及/或有毒货物，卖方负责保证在每件货物上明显地标明货物的性质说明及习惯上被接受的标记。

12.付款条件：买方于货物装船时间前一个月通过______银行开出以卖方为抬头的不可撤销信用证，卖方在货物装船启运后凭本合同交货条款第18条A款所列单据在开证银行议付贷款。上述信用证有效期将在装船后15天截止。

13.其它条件：除非经买方同意和接受，本合同其它一切有关事项均按第二部分交货条款之规定办理，该交货条款为本合同不可分的部分，本合同如有任何附加条款将自动地优先执行附加条款，如附加条款与本合同条款有抵触，则以附加条款为准。

第二部分

14.FOB/FAS条件

14.1.本合同项下货物的装运舱位由买方或买方的运输代理人___________租订。

14.2.在FOB条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期装上买方所指定的船只。 14.3.在FAS条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期交到买方所指定船只的吊杆下。

14.4.货物装运日前10-15天，买方应以电报或电传通知卖方合同号、船只预计到港日期、装运数量及船运代理人的名称。以便卖方经与该船运代理人联系及安排货物的装运。卖方应将联系结果通过电报或电传及时报告买方。如买方因故需要变更船只或者船只比预先通知卖方的日期提前或推迟到达装运港口，买方或其船运代理人应及时通知卖方。卖方亦应与买方的运输代理或买方保持密切联系。 14.5.如买方所订船只到达装运港后，卖方不能在买方所通知的装船时间内将货物装上船只或将货物交到吊杆之下，卖方应负担买方的一切费用和损失，如空舱费、滞期费及由此而引起的及/或遭受的买方的一切损失。

14.6.如船只撤换或延期或退关等而未及时通知卖方停止交货，在装港发生的栈租及保险费损失的计算，应以代理通知之装船日期(如货物晚于代理通知之装船日期抵达装港，应以货物抵港日期)为准，在港口免费堆存期满后第十六天起由买方负担，人力不可抗拒的情况除外。上述费用均凭原始单据经买方核实后支付。但卖方仍应在装载货船到达装港后立即将货物装船，交负担费用及风险。

15.C&F条件

15.1.卖方在本合同第8条规定的时间之内应将货物装上由装运港到中国口岸的直达船。未经买方事先许可，不得转船。货物不得由悬挂中国港口当局所不能接受的国家旗帜的船装载。

15.2.卖方所租船只应适航和适货。卖方租船时应慎重和认真地选择承运人及船只。买方不接受非保赔协会成员的船只。

15.3.卖方所租载货船只应在正常合理时间内驶达目的港。不得无故绕行或迟延。

15.4.卖方所租载货船只船龄不得超过 年。对超过 年船龄的船只其超船龄额外保险费应由卖方负担。买方不接受船龄超过二十年的船只。

15.5.一次装运数量超过一千吨的货载或其它少于一千吨但买方指明的货载，卖方应在装船日前至少10天用电传或电报通知买方合同号、商品名称、数量、船名、船龄、船籍、船只主要规范、预计装货日、预计到达目的港时间、船公司名称、电传和电报挂号。

15.6.一次装运一千吨以上货载或其它少于一千吨但买方指明的货载，其船长应在该船抵达目的港前7天和24小时分别用电传或电报通知买方预计抵港时间、合同号、商品名称及数量。

15.7.如果货物由班轮装运，载货船只必须是______船级社最高船级或船级协会条款规定的相同级别的船级，船只状况应保持至提单有效期终了时止，以装船日为准船龄不得超过 年。超过 年船龄的船只，卖方应负担超船龄外保险费。买方绝不接受超过 年船龄的船只。

15.8.对于散件货，如果卖方未经买方事前同意而装入集装箱，卖方应负责向买方支付赔偿金，由双方在适当时间商定具体金额。

15.9.卖方应和载运货物的船只保持密切联系，并以最快的手段通知买方船只在途中发生的一切事故，如因卖方未及时通知买方而造成买方的一切损失卖方应负责赔偿。

16.CIF条件 在CIF条件下，除本合同第15条C&F条件适用之外卖方负责货物的保险，但不允许有免赔率。

17.装船通知 货物装船完毕后48小时内，卖方应即以电报或电传通知买方合同号、商品名称、所装重量(毛/净)或数量、发票价值、船名、装运口岸、开船日期及预计到达目的港时间。如因卖方未及时用电报或电传给买方以上述装船通知而使买方不能及时保险，卖方负责赔偿买方由此而引起的一切损害及/或损失。

18.装船单据

18.A.卖方凭下列单据向付款银行议付货款：

18.A.1.填写通知目的口岸的__________运输公司的空白抬头、空白背书的全套已装运洋轮的清洁提单(如系C&F/CIF条款则注明“运费已付”，如系FOB/FAS条款则注明“运费待收”)。

18.A.2.由信用证受益人签名出具的发票5份，注明合同号、信用证号、商品名称、详细规格及装船唛头标记。 1

8.A.3.两份由信用证受益人出具的装箱单及/或重量单，注明每件货物的毛重和净重及/或尺码。

18.A.4.由制造商及/或装运口岸的合格、独立的公证行签发的品质检验证书及数量或重量证书各两份，必须注明货物的全部规格与信用证规定相符。

18.A.5.本交货条件第17条规定的装船通知电报或电传副本一份。

18.A.6.证明上述单据的副本已按合同要求寄出的书信一封。

18.A.7.运货船只的国籍已经买主批准的书信一封。

18.A.8.如系卖方保险需提供投保不少于发票价值110%的一切险和战争险的保险单。

18.B.不接受影印、自动或电脑处理、或复印的任何正本单据，除非这些单据印有清晰的“正本”字样，并经发证单位授权的领导人手签证明。

18.C.联运提单、迟期提单、简式提单不能接受。

18.D.受益人指定的第三者为装船者不能接受，除非该第三者提单由装船者背书转受益人，再由受赠人背书后方可接受。

18.E.信用证开立日期之前出具的单据不能接受。

18.F.对于C&F/CIF货载，不接受租船提单，除非受益人提供租船合同、船长或大副收据、装船命令、货物配载图及或买方在信用证内所要求提供的其它单据副本各一份。

18.G.卖方须将提单、发票及装箱单各两份副本随船带交目的口岸的买方收货代理人_______________。

18.H.载运货船启碇后，卖方须立即航空邮寄全套单据副本一份给买方，三份给目的口岸的对外贸易运输公司分公司。

18.I.卖方应负责赔偿买方因卖方失寄或迟寄上述单据而使买方遭受的一切损失。

18.J.中华人民共和国境外的银行费用由卖方负担。

19.合同所订货物如用空运，则本合同有关海运的一切条款均按空运条款执行。

20.危险品说明书 凡属危险品及/或有毒，卖方必须提供其危险或有毒性能、运输、仓储和装卸注意事项以及防治、急救、消防方法的说明书，卖方应将此项说明书各三份随同其他装船单据航空邮寄给买方及目的口岸的____________________运输公司。

21.检验和索赔 货物在目的口岸卸毕60天内(如果用集装箱装运则在开箱后60天)经中国进出口商品检验局复验，如发现品质、数量或重量以及其它任何方面与本合同规定不符，除属于保险公司或船行负责者外，买方有权凭上述检验局出具的检验证书向卖方提出退货或索赔。因退货或索赔引起的一切费用包括检验费、利息及损失均由卖方负担。在此情况下，凡货物适于抽样及寄送时如卖方要求，买方可将样品寄交卖方。

外贸出口合同

18仲裁：

在履行协议过程中，如产生争议，双方应友好协商解决。若通过友好协商未能达成协议，则提交中国国际贸易促进委员会对外贸易仲裁委员会，根据该会仲裁程序暂行规定进行仲裁。该委员会决定是终局的，对双方均有约束力。仲裁费用，除另有规定外，由败诉一方负担。

arbitration

all disputes arising from the execution of this agreement shall be settled through friendly consultations. in case no settlement can be reached, the case in dispute shall then be submitted to the foreign trad arbitration commission of the china council for the promotion of international trade for arbitration in accordance with its provisional rules of procedure. the decesion made by this commission shall be regarded as final and binding upon both parties. arbitration fees shall be borne by the losing party, unless otherwise awarded.

19备注：remark：

卖方： sellers： 买方：buyers：

签字：signature： 签字： signature：

共2页，当前第2页12

进口货物合同

合同编号：

签约日期：

签约地点：深圳电子科技大厦

委托人： (以下称“甲方”)

住址：

法定代表人：

电话： 传真：

邮编： 电子信箱：

受托人：深圳中电投资股份有限公司(以下称“乙方”)

住址：深圳市深南中路2070号电子科技大厦a座

法定代表人：陈旭

电话： 传真：

邮编：518031 电子信箱：

甲、乙双方经友好协商，就甲方委托乙方代理进口本合同项下货物一事达成一致，兹同意按照下述条款签订本合同：

甲方委托乙方代理进口下述货物(以下称“货物”)：

货物名称 规 格 数 量 品牌/商标其 它

二、委托项目：

1、甲方委托乙方以乙方名义与 (以下称“外商”)签订进口合同(以下称“进口合同”)，向其购买上述货物。

2、乙方向外商购买上述全部货物的总价为 (不含税款及代理费)。

3、进口合同中对货物的质量要求应为：

技术标准(标准制订人、标准名称、标准代号/编号等)：

特别约定：

三、乙方义务：

1、根据本合同的有关规定，以自己的名义与外商签订进口合同。

2、按照进口合同的规定，办理货物在中国境外的运输、保险事宜。

3、办理货物的进口报关、对外付汇手续。

4、按照本合同第六条的规定向甲方交付货物。

5、本合同规定的其它义务。

四、甲方义务：

1、按照本合同第五条的规定，及时将购买货物所需全部资金、相关税费及代理费付至甲方账户。

2、按照本合同第六条的规定，及时提取货物。

3、应乙方要求，参加由乙方组织的有关货物技术标准、质量要求等方面的对外谈判及有关活动;必要时，负责编制合同附件。

4、检验货物并及时对货物质量问题提出异议。

5、本合同规定的其它义务。

五、付款条件：

1、甲方应于 前凭乙方书面通知，将进口合同所规定的全部货款汇入乙方账户;甲方支付人民币的，折算汇率为： 。

2、甲方应于 前，凭乙方书面通知及海关出具的有关单据，将因进口货物而应向海关缴纳的税款汇入乙方账户。

3、甲方应于 前，向乙方支付代理费，代理费金额为本合同第二条所规定的进口合同总价的 %。

六、货物交付：

1、货物进口批文由 方负责办理。

2、乙方应于货物预计到达中国口岸前 日内，书面通知甲方有关情况;并于货物到达中国口岸后立即通知甲方。

3、甲方应在乙方发出到货通知后 日内赴交货地点收货。

4、货物在中国境内的法定商检由 方负责，费用由 方承担。

5、乙方应在 将货物交给甲方，货物自进关口岸至 的运输及保险由 方负责，费用由 方承担。

七、对外索赔：

如外商在履行进口合同时有违约行为，甲方决定向外商提起仲裁或诉讼的，应当书面通知乙方并提供所需费用及协助，由此而产生的损失或利益由甲方承担或享有。如甲方未及时书面通知乙方并提供所需费用及协助，乙方无义务对外商提起任何仲裁或诉讼。

八、违约责任：

1、如甲方未按照本合同第五条的规定及时支付有关款项，应向乙方支付滞纳金，金额为逾期支付部分的万分之五/每天;逾期超过十五天的，乙方有权解除本合同并要求甲方赔偿因此而遭受的一切损失。

在甲方按照本合同第五条的规定支付全部款项前，乙方有权留置全部货物。

2、如甲方未能按照本合同第六条的规定及时提取货物，应承担延迟提货期间发生的货物仓储费及其它费用;逾期超过十五天不提货的，乙方有权解除合同并处置未提取货物。

九、争议处理：

凡因执行本合同发生纠纷的，双方应协商解决;协商不成的，任何一方均可向人民法院提起诉讼。

十、其它：

1、本合同自甲、乙双方代表人签字并盖章之日起生效。

2、本合同一式二份，甲、乙双方各执一份，效力均等。

3、本合同未明确规定的事项，按照《民法典》的规定执行。

十一、特约条款(如本合同其它条款与本款的规定发生冲突，以本条的规定为准)：

委托人：

代表人签字：

盖章：

受托人：深圳中电投资股份有限公司

代表人签字：

盖章：

委托进口代理合同

合同编号：

签约日期：

签约地点：

委托人：____________________（以下称“甲方”）

住址：

法定代表人：

电话：?传真：

邮编：?电子信箱：

受托人：____________________（以下称“乙方”）

住址：

法定代表人：

电话：?传真：

邮编：电子信箱：

甲、乙双方经友好协商，就甲方委托乙方代理进口本合同项下货物一事达成一致，兹同意按照下述条款签订本合同：

一、甲方委托乙方代理进口下述货物（以下称“货物”）：?货物名称规格数量品牌/_____?其它?

二、委托项目：

3、进口合同中对货物的质量要求应为：

技术标准（标准制订人、标准名称、标准代号/编号等）：

特别约定：

三、乙方义务：

1、根据本合同的有关规定，以自己的名义与外商签订进口合同。

2、按照进口合同的规定，办理货物在中国境外的运输、_____事宜。

3、办理货物的进口报关、对外付汇手续。

4、按照本合同第六条的规定向甲方交付货物。

5、本合同规定的其它义务。

四、甲方义务：

1、按照本合同第五条的规定，及时将购买货物所需全部资金、相关税费及代理费付至甲方账户。

2、按照本合同第六条的规定，及时提取货物。

3、应乙方要求，参加由乙方组织的有关货物技术标准、质量要求等方面的对外谈判及有关活动；必要时，负责编制合同附件。

4、检验货物并及时对货物质量问题提出异议。

5、本合同规定的其它义务。

五、付款条件：

1、甲方应于_________________前，凭乙方书面通知，将进口合同所规定的全部货款汇入乙方账户；甲方支付人民币的，折算汇率为：_________________。

2、甲方应于_________________前，凭乙方书面通知及海关出具的有关单据，将因进口货物而应向海关缴纳的税款汇入乙方账户。

3、甲方应于_________________前，向乙方支付代理费，代理费金额为本合同第二条所规定的进口合同总价的_________________%。

六、货物交付：

1、货物进口批文由_________________方负责办理。

2、乙方应于货物预计到达中国口岸前_________________日内，书面通知甲方有关情况；并于货物到达中国口岸后立即通知甲方。

3、甲方应在乙方发出到货通知后_________________日内赴交货地点收货。

4、货物在中国境内的法定商检由_________________方负责，费用由_________________方承担。

5、乙方应在_________________将货物交给甲方，货物自进关口岸至_________________的运输及_____由_________________方负责，费用由_________________方承担。

七、对外索赔：

如外商在履行进口合同时有违约行为，甲方决定向外商提起_____或诉讼的，应当书面通知乙方并提供所需费用及协助，由此而产生的损失或利益由甲方承担或享有。如甲方未及时书面通知乙方并提供所需费用及协助，乙方无义务对外商提起任何_____或诉讼。

八、违约责任：

1、如甲方未按照本合同第五条的规定及时支付有关款项，应向乙方支付滞纳金，金额为逾期支付部分的万分之五/每天；逾期超过十五天的，乙方有权解除本合同并要求甲方赔偿因此而遭受的一切损失。

在甲方按照本合同第五条的规定支付全部款项前，乙方有权留置全部货物。

2、如甲方未能按照本合同第六条的规定及时提取货物，应承担延迟提货期间发生的货物仓储费及其它费用；逾期超过十五天不提货的，乙方有权解除合同并处置未提取货物。

九、争议处理：

凡因执行本合同发生纠纷的，双方应协商解决；协商不成的，任何一方均可向人民法院提起诉讼。

十、其它：

1、本合同自甲、乙双方代表人签字并盖章之日起生效。

2、本合同一式二份，甲、乙双方各执一份，效力均等。

3、本合同未明确规定的事项，按照《_____》及《关于对外贸易代理制的暂行规定》（对外经济贸易部_______年_______月_______日发布）的规定执行。

十一、特约条款（如本合同其它条款与本款的规定发生冲突，以本条的规定为准）：

委托人：

代表人签字：

盖章：

受托人：

代表人签字：

盖章：

入学申请书的应用范围

入学申请书的使用通常有以下一些情况：  原先不在该学校学习，后来因为搬家等情况必须离开原学校，后转入该校学习的，则需向该学校提出入学申请。  一些休学在家的学生，由于休学时间已满，而欲回校学习的，需写出入学申请书，请求批准。  一些面向社会招生的各类学校，在招收新学生时，要求学生要提出入学申请，校方批准后方可进校学习的。  欲到国外求学的人员，要先向有关学校写出入学申请，经校方核准后，才能准备有关到国外求学事宜。    以上所列这些只是大体上的一种归纳。读者还须根据一些具体情况，确定自己写入学申请的运用场合。

卖方：________________________

地址：_______________________

电话：__________传真：__________

电子邮箱：_____________________

买方： ______________________

地址： ______________________

电话：_________传真：_____________

电子邮箱： ______________________

买卖双方经协商同意按下列条款成交：

1.货物名称、规格和质量：

2、数量：

3、单价及价格条款 ：

(除非另有规定，“FOB”、“CFR”和“ CIF”均应依照国际商会制定的《20__年国际贸易术语解释通则》(INCOTERMS 20__)办理。)

4、总价 ：

5、允许溢短装： ___%.

6、装运期限：

收到可以转船及分批装运之信用证___天内装运。

7、付款条件：

买方须于____ 前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后_____天在中国到期，并必 须注明允许分批装运和转船。

买方未在规定的时间内开出信用证，卖方有权发出通知取消本合同，或接受 买方对本合同未执行的全部或部份，或对因此遭受的损失提出索赔。

8、包装：

9、保险：

按发票金额的___%投保_____险，由____负责投保。

10、品质/数量异议：

如买方提出索赔，凡属品质异议须于货到目的口岸之日起30天内提出，凡属 数量异议

须于货到目的口岸之日起15天内提出，对所装货物所提任何异议于保险 公司、轮船公司、其他有关运输机构或邮递机构所负责者，卖方不负任何责任。

11、由于发生人力不可抗拒的原因，致使本合约不能履行，部分或全部商品 延误交货，卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不 能克服的客观情况。

12、仲裁：

因凡本合同引起的或与本合同有关的任何争议，如果协商不能解决，应提 交中国国际经济贸易仲裁委员会深圳分会。按照申请仲裁时该会当时施行的仲裁 规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。

13、通知：

所有通知用___文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后___日内书面通知另一方。

14、本合同为中英文两种文本，两种文本具有同等效力。本合同一式 _____ 份。自双方签字之日起生效。

卖方签字(盖章)： 买方签字(盖章)：

这个寒假，为了自己毕业后能更好的投入工作，也为了开阔自己的眼界，提高自己的能力，我匆匆离开家乡，来到了远在新疆的纺织公司，从奎屯、石河子、五家渠我们学习了很多在学校在书中学不到的东西。

在这里，我们学习到了一切从实际出发，对待每一件事都做到专一性的行事原则，我很庆幸自己当初的选择，我相信在这里我们能够一展所长，走好未来的路。公司的生产车间给人舒适的感觉：宽敞明亮，每个生产区之间、每台设备之间都隔开一定间隔，并装有“简易空调”，保障了工人的基本权益。为公司的每位员工提供了贴心的环境，也为每位员工提供了良好的福利。能够在这样的公司里工作我感到信心十足。

在工厂，我们学习并详细了解了从下订单——原棉检验——配棉——拌花——清花——梳棉——并条——粗纱——细沙——络筒——品质检验——交单等所有工序，理论与实践相结合让我们所学的知识更加系统充实。而所有工序中，品质检验是全厂最最核心、要求最高的部分。品质检验与车间生产关系更表现为：车间生产过程中每到一个阶段都需要品质检验。而公司将很大精力放在了这上面，对质量要求很高，可见在其竞争策略中，产品质量居于首位。由于华孚不必担心供应链、库存管理和产品销售问题，所以他有大量精力投放在品质检验上，只要在成本许可范围内，将质量做到最好，就不需要担心其他问题了。

在这次实习中，有一点我感受很深。在学校，理论的学习很多，而且是多方面的，几乎是面面俱到;而在实际工作中，可能会遇到书本上没学到的，又可能是书本上的知识一点都用不上的情况。或许工作中运用到的只是很简单的问题，只要套公式似的就能完成一项任务。因此，在平时我们要学习更多的知识层面去应付各种工作上的问题。毕竟，即将毕业的我们马上就要走向社会、走向工作岗位。只懂得纸上谈兵是远远不及的，以后的人生旅途是漫长的，要锻炼自己成为一名合格的、对社会有用的人才，我们就要不断地学习，努力地向上，只要你去努力，只要你伸出你那随时可以伸出的手，周围的机会就会随时可能属于你。

入学申请书范文

入学申请书尊敬的校领导：你们好。    我是我校×级会计二班的学生夏秋叶。我在去年的一次体育课上，由于不慎摔了一跤，造成了左腿骨折。经过一年的治疗和调养，现已基本痊愈，为了不耽误下学期的课程学习，现特提出申请，请求复学。    去年住院以后，由于不能上课，就向学校提出了休学申请。当时我的辅导员张治业老师跑前跑后，所有的休学手续都是他给办的，因此有些具体复学的手续我还不太清楚。上周，我曾给张老师打电话，但办公室的老师告诉我张老师已经调往别的单位了。我也不好再麻烦张老师。我开始休学的时间是6月7日，再有20天正好就是整一年。由于学校进入6月份，临近期末，各方面工作较多较忙，又快放暑假了，因此为了能在学校放假前将所有的入学手续办妥，我就向学校教务处的王老师作了咨询。王老师给了我很多帮助，我已填好了有关的一些表格。    在家修养这一年中，我从未放弃过自己的课本学习。出院不久，我就让家人把我所有的专业书籍从学校拿了回来，每天给自己制定了具体的学习计划。专业外语，我每天几乎都在读。班上同学来我家时，我就会把看不懂的地方拿出来，向他们求教。这一年来，我还读了不少提高个人修养方面的书，读了一些中外名著。因此，一年来我虽未在校学习，但却并未停止学习。因此，我希望领导考虑能否让我重新跟原班学习。我知道这种提法有些过分，但我请学校找有关的老师考试一下，再做决定。若我各方面知识确实不让人满意，我将无怨无悔重新学起。此致衷心的谢意学生夏秋叶×年×月×日

入学申请书范文评析

入学申请书刊授大学尊敬的先生、女士：你们好。    我是居住在英国伦敦的一名华人。我从一个在上海的朋友那里得知你们在国内举办“刊授大学”的消息，颇感兴趣，所以不惜隔着千山万水，写信申请。     我很小便跟随父母移居英国，每天在学校学习的当然是英文。但是我不能因居住在另一国家而忘记祖国的语言。试想，身为一个中国人而不懂自己国家的语言是一件多么羞耻的事！所以，我坚持不断地每星期六到伦敦开办的中文学校学习。由于多年来的刻苦学习，我的中文水平已大有提高，但是非常可惜，这所学校并没有设置较深的中文课程，所教的无非是些基础和补习性质的中文课，所以我只好在空闲的时间自修。我酷爱祖国悠久的文化、历史、语言，这促使我想深入学习并了解有关中国文学的各方面知识。但在英国，这个条件非常差，无法满足我这强烈的愿望。现在，我的这位朋友跟我谈及了有关你们在国内举办的“刊授大学”，我便请他设法替我申请。我已阅读了大量的中文书籍、刊物，中国的许多文学名著我都看过，每天还阅读中文报纸。    在英国，虽然有无数的函授学校，但所授的大多是商业、科技等专业，文科的专业非常少，更不要说中国语言文学专业了。我知道我申请入学会带给先生、女士们很多麻烦，但我相信你们会谅解我求知心切，多么希望能够跟随“刊授大学”学习！你们若想从各个方面了解我，只要来信告知，我会尽我所能答复你们的一切问题。    请接受我衷心的谢意！学生周玉娣 ×年×月×日于伦敦评析：    这是一篇希望学习中国语言文学的伦敦华人写的入学申请书。申请书先写自己久居英国，听到“刊授大学”的消息后的喜悦心情，进而，作者又写了自己希望学习中文的原因和动机。    全文以一个在外华人的真实感受写出自己渴求学习祖国语言的急切心情。文章在流畅朴实的叙述中寄寓了一个中国人崇高的爱国之心。情真意切，令人动心。就全文来讲，作者申请的目的、理由是明确而具体的，语言的准确运用显示着作者较好的文字功底，文章不长不短 ，适可而止。对有些问题的询问方式，态度谦和，兼顾礼仪，于轻松的行文中，让我们感到作者的真诚。

五个月的实习生活，看似很长，但是一眨眼的功夫就过去了。从刚开始的不谙世事，到此刻的得心应手。刚入公司，一切都显得那么陌生，做什么事情心里都没有底气，不能放开去做。有很多新的东西需要自己去学习和适应。此刻想想人在社会上就是需要适应不断的变化，适者生存，自己只有去适应社会，社会却不会去适应你。只有适应了这种高节奏的生活才能做出效率，作出成绩。作为公司肯定不会需要一个不会创造效益的人。经过几个月的磨练和适应，此刻的我对工作已经得心应手。每一天都会实现安排好当天的工作，把工作按照轻重缓急分配好，能把一天的工作完美的结束就是我这一天的成功了。完美的结束一天的工作只是我此刻的目标，以后我会给自己树立更高的目标，只有在不断追求完美的过程中，自己才能变得更加完美。

十年寒窗寂寞伴，一朝成名幸福随。

十年寒窗无人闻，一朝成名天下知。

十年磨剑为一博，六月试锋现真我。

时间紧，任务重，真投入，出佳绩。

事不避难，知难不难。

事不三思终有悔，人能百忍自无忧。

树信心振足精神，比成绩不甘落后。

谁英雄睡好汉，80天后看一看。

提高文明素质，严肃考风考纪。

天道酬勤，宁静致远。

听听激动，想想感动，不如马上行动。

同学们，相信自己，我能行！

团结拼搏，求实进取。

为了梦想，我们不懈努力。

惟理想点亮生命的精彩。

文明考试，公平竞争。

文学来自勤奋，高分源自拼搏。

我自信我成功。

惜时、专心、苦读，踏出拼搏之路。

细节决定成败，细心赢得未来。

先做该做的事，再做喜欢的事。

现在决定未来，知识改变命运。

小事成就大事，细节成就完美。

心态决定命运，自信走向成功。

心中有理想再累也快乐

信心比黄金更重要。

行胜于言，超越自我，知识启迪智慧。

胸有成竹进考场，先易后难答试题。

学海无涯勤可渡，书山万仞志能攀。

学以载道，诚信为本。

严谨治学，诚信为人。

严肃考试纪律，杜绝考试作弊。

要争就能赢，要拼才能赢。

一个勤奋学习的人才是力量无边的人。

一人诚信一人立，天下诚信天下兴。

一生之苦今日吃，三年之乐来日享。

易题不丢失半分，难题不放弃努力。

应知学问难，在乎点滴勤。

用心看卷，专心答题，细心复查。

优化考试环境，提高考试质量

与诚信携手同行，与舞弊挥手作别。

与其明日后悔，不如今天努力。

真正的勇敢，都包含谦虚。

只要精神不滑坡，办法总比困难多。

志不坚者智不达，言不信者行不果。

志存高远，心系天下。

志在千里，壮心不已。

仔细审题，答题规范，书写工整。

自信人生二百年，会当水击三千里。

自信是成功的第一秘诀。

遵守考场纪律，维护知识尊严。

遵循生活规律，保持良好心态。

做到心胸豁达，不为小事所累。

尊敬的公司领导:

您好!

首先感谢公司对我的培养,长期以来对我的关心和照顾,使我得到了家庭般的温暖。和大家在一起的日子里，让我学到了很多知识，学会了很多为人处事的原则。

认真回顾过去的这一年，我在xx公司学到了很多东西，无论是专业技能还是为人处事方面都有很大的提高，我也非常热爱我的这份工作。此外，我也非常感谢我的同事们，感谢他们一直以来对我的帮助和关怀，以及大家在一起的那份和睦，那份团结一致。

现由于个人原因(家庭原因/身体原因等等)不能在公司继续工作了，请领导给予批准!

此致

敬礼

申请人：

*年*月*日

外贸业务员提前转正申请报告

篇一

尊敬的公司领导：

我于20xx年9月11日进公司，根据公司的需要，目前担任市场专员一职，负责业务方面的工作。本人工作认真、细心且具有较强的责任心和进取心，勤勉不懈，极富工作热情;性格开朗，乐于与他人沟通，具有良好和熟练的沟通技巧，有很强的团队协作能力;责任感强，确实完成领导交付的工作，和公司同事之间能够通力合作，关系相处融洽而和睦，配合各部分负责人成功地完成各项工作。

两个多月来，我在公司领导和同事们的热心帮助及关爱下取得了很大的进步，在今后的工作计划和学习计划中，我会进一步严格要求自己，虚心向其他领导、同事学习，我相信凭着自己高度的责任心和自信心，争取在各方面取得更大的进步。这段时间我归纳起来几点：第一：针对公司太阳能和空气能的产品本人已摸清摸透，这不仅对产品一个了解，更主要的让广大客户更好的了解我们公司产品。

第二：对公司分划的市场做了更多的了解，让我们的产品更好的进入新的市场，使我们的产品更具市场竞争力。

第三：把领导分配的任务尽自己的努力去完成，使公司的效益达到化，创造更多的财富值。

第四：不管什么时候，一直严格要求自己把公司的利益放在第一位，争取在各方面取得更大的进步。

根据公司规章制度，试用职员在试用期满两个月合格后，即可被录用成为公司正式员工。因此，我特向公司申请：希望公司领导能根据我的工作能力、态度及表现给出合格评价，使我能够定期转为正式员工，与公司共同成长、发展。

来到这里工作，我的收获莫过于在敬业精神、思想境界,还是在业务素质、工作能力上都得到了很大的进步与进步，也激励我在工作中不断前进与完善。我明白了企业的美好明天要靠大家的努力往创造，相信在全体员工的共同努力下，企业的美好明天更辉煌。在以后的工作中我将更加努力上进，希望上级领导批准转正。

此致

敬礼

申请人：

20xx年x月x日

篇二

尊敬的领导：

您好!我叫，于*年*月*日进入公司，根据公司的需要，目前担任外贸业务员一职，负责工作。本人工作认真、细心且具有较强的责任心和进取心，勤勉不懈，极富工作热情;性格开朗，乐于与他人沟通，具有良好和熟练的沟通技巧，有很强的团队协作能力;责任感强，确实完成领导交付的工作，和公司同第一范文网，全国公务员共同天地事之间能够通力合作，关系相处融洽而和睦，配合各部门负责人成功地完成各项工作;积极学习新知识、技能，注重自身发展和进步。我自*年*月工作以来，一直从事外贸业务员工作，因此，我对公司这个岗位的工作可以说驾轻就熟，并且我在很短的时间内熟悉了公司以及有关工作的基本情况，马上进入工作。现将工作情况简要总结如下：

在本部门的工作中，我勤奋工作，获得了本部门领导和同事的认同。当然，在工作中我也出现了一些小的差错和问题，部门领导也及时给我指出，促进了我工作的成熟性。

在公司的领导下，我会更加严格要求自己，在作好本职工作的同时，积极团结同事，搞好大家之间的关系。在工作中，要不断的学习与积累，不断的提出问题，解决问题，不断完善自我，使工作能够更快、更好的完成。我相信我一定会做好工作，成为优秀员工中的一份子，不辜负领导对我的期望。

公司给了我这样一个发挥的舞台，我就要珍惜这次机会，为公司的发展竭尽全力。在此我提出转正申请，希望自己能成为公司的正式员工，恳请领导予以批准。

此致

敬礼!

申请人：

时间：20xx年**月**日

篇三

申请人：

职务：外贸业务/跟单员

入职日期：20xx年9月XX日

申请日期：20xx年12月XX日

尊敬的您好!

我于20xx年9月XX日成为XX公司的一名试用员工，担任外贸业务/跟单员一职务已将近3个月，根据公司的规章制度，现申请转为公司正式员工。

首先非常感谢您当初给予我一个工作机会，这三个月来我学到了很多，感悟了很多。我认为这是一份非常棒的工作，每天忙碌的工作使我的日子过得很充实，我学得很快，进步得更快，能够兼任越来越多的工作任务。现对我这三个月来的工作做如下总结：

1.能够独立处理船务相关工作：虽然在我以前的工作中未曾接触过船务相关工作，而我也不是学这方面的专业，但是以我积极好学和严谨细致的工作态度，我较快掌握了船务基本流程，遇到不懂的问题我虚心向同事请教，现能够独立跟进订单，目前已在跟进8张订单。

2.对公司产品电磁炉有了基本的认识：通过走进工厂生产车间，参加广交会，跟进开发事宜和自主学习等途径，我对电磁炉的工作原理、规格、生产流程、部件构成、包装信息、产品特性和认证等有了基本的认识。我认为只有对自家的产品了解越深，才能更好地跟进产品开发事宜和生产订单;在与客户洽谈业务时才能掌握主动权，展示公司实力，得到客户的信任;作为工厂与客户之间的沟通桥梁，能够与工厂或客户工程师讨论技术相关问题，帮助解决产品开发阶段和生产阶段所产生的各种问题。因为我是理工科背景的，所以对产品知识学得很快，我对电磁炉也怀有浓厚的兴趣，为了更好地了解电磁炉的工作原理，我还特意翻看高中的物理书和大学的电工学课本，重温电池感应原理和电路元器件等物理知识。

3.能够独立缮写英文邮件，与客户无障碍交流;逐渐参与客户交流会议，接触到更多的客户，学习业务谈判技巧和与客处事之道;能够缮写开发信，开发新客户，希望将来能在业务开发方面有更大的提高;

3.遵守公司规章制度，上班不迟到不早退;对工作认真负责，自愿加班完成当天工作任务，享受忙碌的工作节奏;与同事相处融洽，配合他们完成各项工作，逐渐融入这个工作团队中。

在工作了3个月，我渐渐喜欢上这份工作，我觉得目前这就是我想要的一种工作状态，以下是我希望继续留在本公司发展的因素：

1.我热爱家电行业，并致力于在这个行业发展下去;

2.我喜欢忙碌的工作，生活过得充实，能学得更多更快，有满足感;

3.我喜欢外贸行业，喜欢和别人用英语交流，在本公司有不少与外国人交流的机会;

4.在本公司能够学习到较全面的外贸知识，有权力决策和独立处理事务，而不仅仅follow别人的指令;

5.是一位非常棒的上司，她教会我如何独立处理各种事情,从她身上我可以学到很多，她的耐心教导和严格要求使我进步非常快,我希望能继续向她学习，成为一名出色的业务;

6.良好的工作环境，同事们待我都很好，公司内部没有矛盾和恶性竞争;

7.本公司老员工比较多，证明公司管理方面做得比较好，能吸引员工长期为公司服务，我相信我也能渐渐发现富多的好，愿意在本公司长期发展。

而我身上也有如下这些优势，能让本公司相信，我是一名优秀的员工，致力于为公司创造的利益：

1.我对工作认真、主动、负责，能够同时处理多项工作任务，对于较琐碎的工作能够做到有条不絮，细心，不出差错;

2.我的学习能力强，喜欢学习新知识，喜欢思考，善于总结，能快速掌握工作上的事务，独立开展各项工作;

3.我的理工科背景使我能够快速理解产品技术相关知识，有较强的逻辑思维，有较强的能力跟进产品开发事宜;

4.因为我是学设计专业的，我可以兼任设计工作，具备良好的审美能力，能熟练运用各类设计软件，尤其擅长三维设计，等于多聘请了一个设计师;

5.我尊重服从上司，待人友善，与同事配合默契，乐于与他人沟通，具有良好的沟通技巧，有很强的团队协作能力;

6.我能够认识自己的不足，并且不断完善自我，通过自我学习不断提升各方面的能力;

7.我致力于做好每一件事情，你可以认为这是追求完美，但这就是我对待事情的态度;

8.自我约束能力强，做事有毅力，一旦定了目标，必定争取到最后。

能到本公司工作与发展，我感受到自己的幸运，也更加迫切希望以一名正式员工的身份继续在这里工作。在以后的工作中我会一如既往，对人：与人为善;对工作，力求完美，不断提升自己的业务水平和综合素质，以期为公司创造更大的利益。

在此我提出转正申请，希望能成为富多的一名正式员工，转正之后，我会更加努力工作，并且为接下来的工作制定以下计划：

1.加倍熟悉跟单工作，不断累积经验，争取零出错;

2.提高业务开发能力，提高商务谈判能力，争取更多订单;

3.增加对产品的熟悉程度，具备较强的能力跟进开发事宜和技术相关问题;

4.提高英语口语能力，能够流利地和外国客户交流，会考虑参加一些培训课程;

5.兼任设计等更多工作任务，成为本公司一名出色的员工!

以上请予以批准转正申请，谢谢!

申请人：

20xx年12月XX日

作为一名合格的大学生，社会实习是必经的过程，不管什么专业，都能在实习中获得自己以后从事的工作岗位所必需的技能。

时间过的飞快，为期一个月的实习结束了，在这段时间里，实习充实了我的学习生活，我学到了许多书本上无法体验的知识。通过实习，我感触颇多，得到许多新的认识，对许多问题多了深一层次的思考。回想起这两个月的生活，一个人在新的环境里，应付新的人际关系，本来就是挺辛苦的事，再加上工作的繁忙和紧张的生活节奏，这两个月来真可以用艰辛来形容了。还好这一切我都挺了过来，相反这些困难让我更加的了解自己、坚定信心，也让我从中得到了深刻的认识。以后我就是社会上的一份子了，责任也将越来越重。

实习，顾名思义，在实践中学习。在经过一段时间的学习之后，或者说当学习告一段落的时候，我们需要了解，自己的所学需要或应当如何应用在实践之中，因为任何知识都源于实践，归于实践，所以，要将所学付诸实践，来检验所学。然而，我们当然不希望实习仅止于此，那就太狭隘了。

我的实习，其实是工作。在这两个月中，有太多太多的感触，一时竟不知道从何说起。在此次实习中，我感悟颇多：

(1)坚持学以致用

我的工作是在公司的商务部见习外贸业务。

外贸业务员，算是与专业对口工作的不二选择了，而且我们曾于大三进行过TMT模拟实习，对外贸流程有一定的了解。然而经过在商务部一段时间的工作，我渐渐明白有时实际要比理论简单直接的多，但大多数情况下实际操作还是比理论要复杂、间接，通常是我在别人的实际操作中领会到了自己所学理论的重点及要旨。值得庆幸的是在两个月的时间里，公司的同事领导给予了我热情的指导和帮助，而我也虚心向他们请教学习，在理论运用于实践的同时，也在实践中更加深刻地理解了以前没有理解透彻的知识。

(2)加强英语及专业知识的学习

对于外贸人员而言，不仅要掌握够硬的专业知识，而且还必须会用英语与外商交流、谈判及写传真、书信。如果专业英语知识掌握不好，就很难胜任工作，甚至会影响业务的顺利进行。因此，在实习中要求我们加强英语的学习，掌握外贸专业术语基础。

(3)要有坚持不懈的精神

作为在校生，我们不管到哪家公司，一开始都不会给我们布置过多的工作任务，一般都是先让我们熟悉公司的工作环境，在这段时间里很多人会觉得很无聊，没事可做，便会产生离开的念头。在这个时候我们一定要坚持，不能轻易放弃。

再者，在外工作不比在家里或者学校，做的不好挨批是正常的事，承受能力差的同学很容易放弃。这时我们要直面问题，如果是自己的失误，一定要改正错误，吸取经验，争取不再犯;如果不是自己的责任也不要和上司顶嘴，领导有比我们更大的压力，他工作不顺心总要找个方式释放。走上社会，要学着“宰相肚里能撑船”，成大事者心中必能纳百川。

我只身一人在外工作，刚开始的几天觉得工作无聊，再加上想家的情绪“作祟”，真的有过放弃的念头，但是转念一想，我已经把行李带过来了，绝不能就这样回去，不能做一个逃兵，于是我坚持下来了，一个月，两个月……通过了这段时间的磨练，再加上四年远离家乡的大学生活，我的独立性越来越强。我相信，以后不管走到哪里，我能很快地适应新的环境，这对于我自身是一项难能可贵的技能。

(4)要虚心学习，不耻下问

在工作过程中，我们肯定会碰到很多的问题，有很多是我们所不懂的，不懂的东西我们就要虚心向同事请教。同时，我们也不要怕犯错。每一个人都有犯错的时候，工作中第一次做错了不要紧，重要的是知错能改。如此循序渐进，一定能够得到实质上的提高。

(5)要确立明确的目标，并端正自己的态度

平时，我们不管做什么事，都要明确自己的目标，到公司工作以后，要知道自己能否胜任这份工作，关键是看你自己对待工作的态度，态度对了，即使自己以前没学过的知识也可以在工作中逐渐的掌握。因此，要树立正确的目标，在实现目标的过程中一定要多看别人怎样做，多听别人怎样说，多想自己应该怎样做，然后自己亲自动手去多做。只有这样我们才能把事情做好。

通过本次的实习，我还发现自己专业知识中很多的不足，并为今后的学习指明了方向，同时也会为将来的工作打下一个良好的基础。在学校的TMT模拟实习中，我每次填单总是填不完整，抱着“反正不是真正的贸易，做错也没关系”的态度，时常不认真对待单据，经过这次的训练，我已经可以独立正确熟练地填制一些进出口常用单据。

经过两个月的工作，我的英语技能、制单操作和函电写作水平得到了提高。这次的实习让我懂得只有通过刻苦的学习，加强对业务知识的熟练掌握程度，在现实的工作中才会得心应手，应对自如。

在实际操作中，我深刻体会到，国际贸易的中间环节多，涉及面广，除交易双方当事人外，还涉及商检、运输、保险、金融、车站、港口和海关等部门等。

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

空运货物出口运输合同范本

甲方：

地址：

邮政编码：

电话：

传真：

乙方：

地址：

邮政编码：

电话：

传真：

经过平等、友好协商，甲、乙双方就空运货物出口运输事宜，于年月日签订如下协议：

(一) 委托事项

甲方接受乙方委托，承接乙方委托的空运出口运输业务。乙方指定甲方作为其代理人，代为安排提货、办理出口报关和出口商品检验检疫等事务。

(二) 乙方应在每票货物出运之前五个工作日以书面形式(包括信函、传真、电报、电传)向甲方提交《出口运输委托书》(简称“委托书”或“托单”)。

“委托书”应包括但不限于以下内容：

托运人(shipper)名称、姓名、地址、联系方式;

收货人(consignee)名称、姓名、地址、联系方式;

通知方名称、姓名、地址、联系方式;

航班号、日期、始发港、目的港;

货物品名、件数、重量、体积、声明价值;

运费及其它费用的标准和支付方式;

托运人的签名、盖章、日期。

乙方提交的委托书没有签名盖章缺乏上述部分或全部内容的，乙方应按照甲方要求进行补正，否则甲方有权拒绝接受委托。

(三) 乙方委托甲方代为办理货物出口报关和出口商品检验检疫等事务的，应及时向甲方提供办理上述事务所需的文件和单证。乙方应对其提供的文件和单证的真实性、合法性和完整性负责。

(四) 乙方在向甲方发出委托后要求撤消或变更委托事项、委托内容的，应采用书面形式并得到甲方的认可，乙方应补偿甲方由此付出的额外费用。

(五) 接收货物 如果甲方在收货时发现乙方的货物表面状况(包括外包装)不良，甲方有权拒绝接收货物。如果乙方不能在甲方要求的时间内对货物及其包装进行改良，甲方有权停止为乙方出运货物。由于甲方原因未能在乙方指定时间内将货物按排出港，乙方有授向甲方提出损失索赔。

(六) 对货物的要求

乙方不应在其托运的货物中夹带禁止运输、限制运输物品和危险物品。有关对禁止运输、限制运输物品和危险物品的规定以国际公约、相关国家法律法规规章、行业协会等的明文规定为准。如乙方谎报货物品名，夹带上述物品，乙方应对由此而造成的甲方的全部损失承担赔偿责任。

(七) 乙方应向甲方支付与货物运输有关的所有运杂费用。

乙方应在货物起飞后30天内将相应款项支付给甲方。

(八) 本协议有关的任何事务，适用中华人民共和国法律、法规及相关国际公约的规定。

(九) 协议的修改和补充

对本协议的修改和补充应采用书面形式，并得到双方的书面确认。修改和补充从双方书面确认之日起生效。

(十) 本协议自双方盖章之日起生效。本协议的有效期至年月日止。

(十一) 本协议以传真形式签订确认，同具法律效力。

(十二) 签约地：

甲方：

日期： 年月 日

乙方：

日期： 年月 日