货物出口的基本流程热门20篇

海运进口货物清关及运输协议

甲方：_________

地址：_________

乙方：_________

地址：_________

_________（以下简称甲方）与_________（以下简称乙方）就海运进口货物的清关及运输事宜，经双方友好协商，达成协议如下：

一、甲方的责任与义务

1.甲方需在货物到达海港前（近洋船抵港2日内），向乙方提供进出口货物完整真实的相关文件（加盖公司印章）。

2.甲方应保证在接到乙方提供的关税，增值税税单正本或副本后，24小时内提供限额支票。

3.若由于甲方不能提供进出口货物单拒或用以缴纳进口关税及增值税的限额支票而产生的相关费用，如滞报金，滞箱费，港口费，滞纳金，转栈费等经甲方确认后由甲方承担。

二、乙方的责任和义务

1.乙方将负责甲方的换单，报关，纳税，海关验货，商检，卫检，动植检，陆运等所有清关及运输手续。

2.在单据齐全，税款及时到位的情况下，乙方负责在货物到港后的5个工作日（最迟不超过7个工作日）内送货到甲方指定地点。

3.由以下原因造成的延迟提货，不追究乙方责任：

（1）海关对货物申报有异议，甲方未及时提供相关资料配合乙方申报。

（2）海关在货物检验中提出问题，未及时解决。

（3）货物已通关放行，因甲方原因不能接受而延迟提货（甲方书面认可）。

4.乙方需将所有问题的文件及时通知甲方，由于乙方未及时通知甲方而造成的损失由乙方承担。

5.乙方应在货物运到甲方厂区或指定地点的其他地点前24小时通知甲方，以便甲方安排卸货。

6.乙方应保证货物在陆运途中的安全。如所运输的货物为有害化学品或危险品，需采取相应的措施，以保证不因意外事故而对环境造成危害；如因运输原因对货物造成的损坏或因运输不当而产生的其他不良影响，甲方有权向乙方提出索赔。

7.乙方需在提货后7日内向甲方提供报关单原件并返还甲方提供的相关政府批文。

三、_____标准

1.集装箱货物_____标准：

（1）20英尺集装箱，包干费_________元；40英尺集装箱，包干费_________元。（以上包干费包括：港杂费，商检费，动植物检，卫检费，回空费，陆运费，报关费，劳务费，通关费，普通换单费。以上包干费不包括：海运提单换单费，海关验货摆箱费，特殊货物熏蒸费，消毒费，洗箱费，非乙方责任造成的修箱费，转栈费，滞箱费，滞报金。）

2.拼箱货物_____标准：

（1）每票货物包干费_________元。（包括：报关费，劳务费，通道费，录入费，三检提货手续费，仓储费，陆运费）

（2）换单费实报实销。

四、结算方式

乙方应于每月_________日前将本月帐目清单（如实报实销则提供发票）送交甲方，甲接到帐目清单核对无误后通知乙方开据正式发票，发票开据后十日内付款。

五、未尽事宜双方本着互惠互利的原则友好协商解决。

六、本协议自甲乙双方签字之日起生效，有效期_________个月。

七、本协议一式两份，甲乙双方各持一份。

甲方（盖章）：_________乙方（盖章）：_________

代表（签字）：_________代表（签字）：_________

_________年____月____日_________年____月____日

供方：____________________________________

需方：____________________________________

为保护供需双方的合法权益，根据《合同法》，经协商一致同意签订本合同。

一、品名、规格、产地、质量标准、包装要求、计量单位、数量、单价、金额及数量。

合计金额：(大写)

二、交(提)货方式及地点：

三、运输费用承担：

四、验收方式：

五、结算方式及付款方式：

六、其他约定事项：

八、甲、乙双方在履行合同的过程中发生争议，应当协商解决，协商不成，双方选择当地人民法院诉讼解决。

九、本合同一式两份，双方各执一份。未尽事宜，双方协商签定补充协议书，该补充协议书与本合同具有同等法律效力。

供方(盖章)：________________________需方(盖章)：________________________

法定代表人：__________________________法定代表人：__________________________

委托代理人：__________________________委托代理人：__________________________

帐号：_______________________________帐号：_______________________________

开户行：__________________________开户行：__________________________

进口货物代理运输协议书

甲方：_________

法定地址：_________

工商执照号：_________

乙方：_________

法定地址：_________

工商执照号：_________

按照《中华人民共和国民法典》的有关规定，甲乙双方本着互惠互利的原则和相互合作与支持的宗旨，就甲方委托乙方为进口货物运输代理等事宜，经友好协商达成如下协议。

第一条 甲方责任和义务

1.甲方最少在货物抵达前(船到港前三天、航班到港前24小时)通知乙方货物到达情况和提供有关文件，包括：海洋提单、空运提单、货物资料、报关和报检报验文件等，以便乙方安排换单和提前审核有关文件。

2.甲方委托乙方代理申报的进口货物，必须按照中华人民共和国海关、商品检验检验以及相关部门对于国家进口货物的有关规定，如实申报。

3.由于甲方或下列原因导致货物申报时间的延迟，而造成未能及时清关或货物疏港等，由甲方承担所产生的风险、责任及费用，而乙方不予承担：

(1)因买卖双方原因导致提单不能在船公司正常换取(如未电放、海运费用未结清等);

(2)由于甲方未能及时提供进口报关所需的全部资料;

(3)因甲方所提供的报关资料失实，而导致的延迟;

(4)在清关过程中由于海关等相关部门要求，需要补充或修改有关单证及相关说明资料，而甲方未能及时提供;

(5)遇到法定节假日或有关部门不能正常办公;

(6)因港口要求和规定而必须输港的货物;

(7)其它甲方及不可抗拒原因。

4.由于非乙方原因造成滞箱费、污箱费、修箱费等费用和责任，由甲方承担，乙方尽量协助甲方协商解决。

第二条 乙方责任和义务

1.乙方应及时、合理安排甲方所委托进口货物的的换单、申报、运输等事宜。

2.乙方应及时通知甲方有关报关进度、预计送货时间，以便甲方合理安排仓库装卸。

3.乙方应积极协助甲方解决在报关过程中出现的各种问题和状况，包括文件的提供、解释、说明等工作。

4.乙方应以最快的速度完成清关工作，并按甲方的指示将货物送到指定地点。

第三条 费用结算

1.按照海关的有关规定，甲方应自行向海关缴付货物进口关税及增值税，特殊情况可以委托乙方代缴，但乙方不予以垫付。

2.甲方应自行交付到付运费(海运费和thc、空运费)，特殊情况可以委托乙方代付，但乙方不予以垫付。

3.非乙方原因产生的特殊费用和责任，乙方不予以承担。

4.乙方在货物完成清关、运输后7天内传单票应收费用明细给甲方，甲方应及时确认并回传。

5.结算方式：经甲乙双方协定，甲方应在送货后_________天内将所有费用支付给乙方，有关税单、报关单等文件按以下_________方式办理：a.先付款，后退单;b.后付款，先退单。

6.如因各种原因乙方无法收到甲方应付之费用，则乙方有权暂扣甲方委托乙方所管理的货物或属于甲方的业务文件，所造成的风险、责任及费用，乙方不予承担。

7.附《进口货物运输费用报价》

第四条 其它

1.本协议项下所产生的任何纠纷或争议，双方应本着友好协商、互惠互利的原则协商解决，如协商不成，双方同意提交管辖地海事法院审理。

2.甲乙双方银行账户、所在地址、电话及电子邮箱发生变更，应及时以书面形式通知对方;否则，由未通知方承担由此而引起的相关责任。

3.本合同一式两份，双方各执一份，自双方签字盖章之日起生效，有效期一年。期满前一个月内双方不提出异议，视为合同自动顺延。即使本协议终止后，双方均不能免除在本协议有效期内的经营活动中所产生的经济与法律责任。

甲方(盖章)：_________乙方(盖章)：_________

代表人(签字)：_________ 代表人(签字)：_________

_________年____月____日_________年____月____日

签订地点：_________签订地点：_________

海运出口货物订舱合同

合同编号：_________

甲方：(托运人)

法定代表人：

法定地址：邮编:

经办人：联系电话：传真:

银行帐户：

乙方：中国外运公司(承运人)

法定代表人：

法定地址：邮编:

经办人：联系电话：传真:

银行帐户：

甲乙双方经过友好协商，就办理甲方货物海运出口订舱事宜达成如下合同：

1、乙方同意接受甲方的委托办理甲方有关货物的海运出口订舱事宜(具体货物品名、数量、装卸港等以甲方提交的订舱单为准)。

2、甲方按照乙方提供的格式订舱单如实地填写货物的品名、数量、质量、装卸港口等内容。对于填写错误而导致的损失或者责任，由甲方自行承担。

3，乙方应及时向甲方提供船期预报以及截止接单日期。上述船期预报不构成双方对船舶驶

离装货港和抵达卸货港具体的时间约定，仅作为甲乙双方办理海运订舱事宜的参考。

4、甲方应根据船期预报，在截止接单日之前将订舱单送达乙方。对于超过截止接单日甲方要求加载的货物，乙方应积极配合甲方的要求，但是对于确实无法力口载的货物，乙方不承担任何责任。

5、甲方的货物包装应适合海洋运输或者货物的特殊属性，包装外面应注明搬运、储存、防护等标识，具体的包装标准参见____。甲方如果对货物的储存、防护或者出口运输有特殊要求，应在订舱单上注明。在甲方货物包装明显不适应海洋运输或者货物特殊属性时，乙方对于货物在运输过程中的灭失或损坏不负责任。

对于货物本身以及货物包装不当造成的第三方的损失，仍应由甲方承担。

6、乙方在接到甲方的订舱单后，应立即办理配载等手续。除甲方能证明乙方在配载上有过错外，乙方不承担任何责任。如果货物未能如期配载，乙方应及时将有关情况通知甲方。

7、乙方接到甲方的订舱单后，甲方要求变更订舱单所列事项的，应在货物装船--天前向乙方出具书面更改单，注明日期并力口盖甲方印章。因变更订舱事项所引起的各项费用，由甲方全部承担。

船舶在开航前，甲方要求解除订舱的，参照《海商法》的有关规定办理。

8、对于预付运费条款下的出口货物，乙方在配舱回单上应标注运费基价。甲方应于货物发运前，按照运费单价及货物数量向乙方指定的帐户支付运费。如标注的运费单价有误，甲方应在船舶开航前向乙方提出更正，否则视为接受乙方所标注的运费基价。

9、对于其他 运费条款下的出口货物，乙方在在配舱回单上应标注运费基价和运费支付的最后期限。甲方应于上述期限届满前，按照运费单价及货物数量向乙方指定的帐户支付运费。如标注的运费单价有误，甲方应于上述期限届满前向乙方提出更正，否则视为接受乙方所标注的运费基价。

10、甲方应在运费支付期限届满之前，将运费支付至乙方指定的帐户。对于逾期支付的款项，甲方应应按每日万分之五的比例向乙方支付违约金。

11、港杂费等其他费用，甲方应在收到乙方转来的帐单后五个工作日之内支付至乙方指定的帐户。对于逾期支付的款项，甲方应按每日万分之五的比例向乙方支付违约金。

12、对于预付运费条款下的出口货物，在甲方耒结清所有费用之前，乙方也有权滞留相应的运输单据，由此产生的所有损失和责任由甲方承担。甲乙双方对此另有约定的，从其约定。

13、乙方在办理甲方货物出口运输的过程中应尽心尽责，对于因乙方的过失而导致甲方遭受的损失和发生的费用承担责任，以上损失不包括货物因延迟等原因造成的经济损失。在任何情况下，乙方的赔偿责任都不应超出每件_____元人民币或每公斤____元人民币的责任限额，两者以较低的限额为准。

14、如货物的灭失或者损坏是由于《海商法》第五十一条所列明的原因造成的，乙方不承担任何责任。

15、本合同项下发生的任何纠纷或者争议，应提交海事法院审理。

或者本合同项下发生的任何纠纷或者争议，应提交中国海事仲裁委员会，根据该会的仲裁规则进行仲裁。

仲裁裁决是终局的，对双方都有约束力。

(注：上述两条款，只能选择一项，请各单位自行决定。)

本合同的订立、效力、解释、履行、争议的解决均适用中华人民共和国法律。

16、本合同从甲乙双方签字盖章之日起生效，合同有效期为一天，合同期满之日前，甲乙双方可以协商将合同延长____天。合同期满前，如果双方中任何一方欲终止合同，需以书面的形式通知另一方。

17、本合同经双方协商一致可以进行修改和补充，修改及引、充的内容经双方签字盖章后，视为本合同的一部分。本合同正本一式_____份。

甲方：乙方：

签字盖章签字盖章

年月日

一.纪律方面：

进一步贯彻小组管理模式，充分发挥好小组长的作用。为达到这个目标。首先我要选拔、培养和使用班干部。选拔培养班级的积极分子，物色班干部，组成班委会，让学生初步学习自己管理自己。在工作过程中不断指出他们的不足，给予及时培养和教育。班干部定期轮换，让更多的学生有得到锻炼的机会，同时也培养了学生既能当领导，又能被领导的适应能力。同时还要培养良好的班风。一个优秀的班集体还应该有良好的班风，正确的舆论。这种班风、舆论对学生有很大的教育作用。为此，在本学期我把培养良好的班风放在了班级工作的首位。而培养班风要以正确的舆论做起。班上有了正确的舆论，坏事在班上就得不到支持，就会很快被制止，学风、班风就可以达到巩固的目的。

二.学习方面：

在本学期中，在学习上我要把工夫下在平时。通过平时的观察与检查学生的书面作业，了解学生的学习态度和进度，并积极与各任课教师沟通。当学生出现较大的进步要及时鼓励与表扬;当学生的成绩出现较大的退步时，要及时调查原因，帮助他赶上去。尽最大努力的调动每一位学生的学习积极性，使班级形成良好的“你追我赶”的学习氛围。并开展互帮互助，使班级两极分化现象减少。

三.生活方面：

在日常生活中，我要多与学生交流，多关心一下学生，利用班会课与思想品德课与学生交谈，通过召开中下生座谈会、召开班干部会议等方式来了解学生情况，增加师生感情消除学生与教师之间的隔膜。而我在组织学生开展集体活动的同时，还要注意对学生进行个别教育工作。班集体中总有一些比较特殊的学生，他们或是学习差，或是性格孤僻，或是顽皮捣蛋。本学期我必须做好这些特殊学生的教育工作。使每个学生都能深切的感受到我对他们的爱。

做为一名班主任，我还是一个新手，在工作中仍有许多的不足。但当我写下这篇计划时，我是下定了决心要好好干这一学期的班主任工作。最后写给自己一句话：记住，工作是做给你自己的!加油!你是最棒的!

财产保险基本险条款

(三)按照重置价值确定。重置价值即重新购置或重建某项财产所需支付的全部费用。

(四)按其他方式确定。可以依据公估价或评估后的市价由被保险人确定。

固定资产的保险价值是按出险时重置价值确定。

第十一条 流动资产(存货)的保险金额由被保险人按最近12个月任意月份的帐面余额确定或由被保险人自行确定。

流动资产的保险价值是出险时帐面余额。

本条规定了流动资产(存货)保险金额与保险价值的确定方式。最近12个月任意月份的帐面余额是指从投保月份往前倒推12个月的其中任意一个月的流动资产帐面余额，被保险人可以依据最近12个月任意月份的帐面余额确定流动资产(存货)保险金额。流动资产(存货)的帐面余额应当按取得时的实际成本核算。

流动资产的保险价值是按出险时帐面余额确定。

第十二条 帐外财产和代保管财产可以由被保险人自行估价或按重置价值确定。

帐外财产和代保管财产的保险价值是出险时重置价值或帐面余额。

本条规定了帐外财产和代保管财产保险金额与保险价值的确定方式。被保险人可自行估价或按重置价值确定，帐外财产和代保管财产应在保险单上分项列明。

帐外财产和代保管财产的保险价值是按出险时重置价值或帐面余额确定。

赔偿处理

第十三条 保险标的发生保险责任范围内的损失，保险人按照保险金额与保险价值的比例承担赔偿责任，按以下方式计算赔偿金额：

(一)全部损失

保险金额等于或高于保险价值时，其赔偿金额以不超过保险价值为限；保险金额低于保险价值时，按保险金额赔偿。

(二)部分损失

保险金额等于或高于保险价值时，其赔偿金额按实际损失计算；保险金额低于保险价值时，其赔偿金额按保险金额与保险价值比例计算。

(三)若本保险单所载财产不止一项时，应分项按照本条款规定处理。

本条规定了保险标的在发生保险事故后的赔偿处理方法。

(一)固定资产

1.全部损失

受损财产的保险金额等于或高于出险时重置价值时，其赔偿金额以不超过出险时重置价值为限；受损财产的保险金额低于出险时重置价值时，其赔款不得超过该项财产的保险金额。

2.部分损失

受损保险标的的保险金额等于或高于出险时重置价值，按实际损失计算赔偿金额；受损财产的保险金额低于出险时重置价值，应根据实际损失或恢复原状所需修复费用乘保险金额与出险时重置价值的比例计算赔偿金额。

保险金额 实际损失或受损财产

赔款=--------------×

出险时重置价值 恢复原状所需修复费用

(二)流动资产(存货)

1.全部损失

受损财产的保险金额等于或高于出险时帐面余额时，其赔偿金额以不超过出险时帐面余额为限；受损财产的保险金额低于出险时帐面余额时，其赔款不得超过到该项财产的保险金额。

2.部分损失

受损保险标的的保险额等于或高于帐面余额，按实际损失计算赔偿金额；受损财产的保险金额低于帐面余额，应根据实际损失或恢复原状所需修复费用乘保险金额与出险时帐面余额的比例计算赔偿金额。

保险金额 实际损失或受损财产

赔款=----------------×

共9页，当前第6页123456789

____有限公司

章 程

第一章 总 则

第一条 依据《中华人民共和国公司法》(以下简称《公司法》)及有关法律、法规的规定，设立泸州周世才食品有限公司(以下简称公司)，特制定本章程。

第二条 本章程中的各项条款与法律、法规、规章不符的，以法律、法规、规章的规定为准。

第二章 公司名称和住所

第三条 公司名称：

第四条 公司住所：

第三章 公司经营范围

第五条 公司经营范围：(以上范围以工商部门核定的为准)

第四章 公司认缴注册资本及股东的姓名(名称)、

出资方式、认缴出资额及出资期限

第六条 公司注册资本实行认缴制，公司认缴注册资本叁万元，股东按期足额缴纳本章程中规定的各自所认缴的出资额。公司成立后，向股东签发出资证明书。出资证明书载明公司名称、公司成立时间、公司注册资本、股东姓名或者名称、认缴出资额和出资日期、出资证明书编号及核发日期并由公司盖章。出自证明书遗失的，应立即向公司申报注销，经公司法定代表人审核后予以补发。公司应设置股东名册，记载股东的姓名、住所、出资额及出资证明书编号等内容。

第七条 股东姓名(名称)、身份证号、缴纳出资期限、认缴注册资本金额、出资方式一览表：

(一)股东以其认缴的出资额为限对公司承担责任。

(二)股东应当按期足额缴纳各自所认缴的出资额，股东不按照规定缴纳出资的，除应当向公司足额缴纳外，还应当向已按期足额缴纳出资的股东承担违约责任。

(三)股东滥用股东权利给公司或者其他股东造成损失的，应当依法承担赔偿责任。股东滥用公司法人独立地位和股东有限责任，逃避债务，严重损害公司债权人利益的，应当对公司债务承担连带责任。

第五章 公司的机构及其产生办法、职权、议事规则

第八条 股东会由全体股东组成，是公司的权力机构，行使下列职权：

(一) 决定公司的经营方针和投资计划;

(二) 选举和更换执行董事，决定有关执行董事的报酬事项;

(三) 选举和更换由股东代表出任的监事，决定监事的报酬事项;

(四) 审议批准执行董事的报告;

(五) 审议批准监事的报告;

(六) 审议批准公司的年度财务预算方案、决算方案;

(七) 审议批准公司的利润分配方案和弥补亏损的方案;

(八) 对公司增加或者减少注册资本作出决议;

(九) 对股东向股东以外的人转让出资作出决议;

(十) 对公司合并、分立、解散、清算或者变更公司形式等事项作出决议; (十一) 修改公司章程;

(十二) 聘任或解聘公司经理。

(十三) 公司章程规定的其他职权。

第九条 股东会的首次会议由出资最多的股东召集和主持。

第十条 股东会会议由股东按照出资比例行使表决权。

第十一条 股东会会议分为定期会议和临时会议。

召开股东会会议，应当于会议召开十五日以前通知全体股东。

定期会议按季度定时召开一次。代表十分之一以上表决权的股东，监事提议召开临时会议的，应当召开临时会议。

股东出席股东会议也可书面委托他人参加股东会议，行使委托书中载明的权利。 第十二条 股东会会议由执行董事召集并主持;执行董事不能履行或者不履行召集股东会会议职责的，有监事召集和主持;监事不召集合主持的，代表十分之一以上表决权的股东

可以自行召集和主持。

第十三条 股东会会议作出修改公司章程、增加或者减少注册资本决议，以及公司合并、分立、解散或者变更公司形式的决议，必须经代表三分之二以上表决权的股东通过。

第十四条 公司不设董事会，设执行董事一人，由股东选举产生。执行董事任期3年，任期届满，可连选连任。执行董事在任期届满前，股东会不得无故解除其职务。

第十五条 执行董事对股东会负责，行使下列职权：

(一) 负责召集股东会，并向股东会议报告工作;

(二) 执行股东会的决议;

(三) 审定公司的经营计划和投资方案;

(四) 制订公司的年度财务预算方案、决算方案;

(五) 制订公司的利润分配方案和弥补亏损方案;

(六) 制订公司增加或者减少注册资本以及发行公司债券的方案;

(七) 制订公司合并、分立、变更公司形式、解散的方案;

(八) 决定公司内部管理机构的设置;

(九) 决定聘任或者解聘公司经理及其报酬事项，并根据经理的提名决定聘任或者解聘公司副经理、财务负责人及其报酬事项。

(十) 制定公司的基本管理制度;

(十一) 在发生战争、特大自然灾害等紧急情况下，对公司事务行使特别裁决权和处置权，但这类裁决权和处置权须符合公司利益，并在事后向股东会报告。

第十六条 公司可设经理，由股东会聘任或解聘。经理对股东会负责，行使下列职权：

(一) 主持公司的生产经营管理工作;

(二) 组织实施公司年度经营计划和投资方案;

(三) 拟定公司内部管理机构设置方案;

(四) 拟定公司的基本管理制度;

(五) 制定公司的具体规章;

(六) 提请聘任或者解聘公司副经理，财务负责人;

(七) 聘任或者解聘除应由股东会决定聘任或者解聘以外的负责管理人员;经理列席股东会会议。

(八) 股东会授予的其他职权。

第十七条 公司不设监事会，设监事一人，由公司股东会选举产生。监事对股东会负责，

监事任期每届三年，任期届满，可连选连任。

第十八条 监事行使下列职权：

(一)检查公司财务;

(二)对执行董事、高级管理人员执行公司职务的行为进行监督，对违反法律、行政法规、公司章程或者股东会决议的执行董事、高级管理人员提出罢免的建议;

(三)当执行董事、高级管理人员的行为损害公司的利益时，要求执行董事、高级管理人员予以纠正;

(四)提议召开临时股东会会议，在执行董事不履行《公司法》规定的召集和主持股东会会议职责时召集和主持股东会会议;

(五)向股东会会议提出提案;

(六)依照《公司法》第一百五十二条的规定，对执行董事、高级管理人员提起诉讼。

(七)公司章程规定的其他职权。

第六章 公司的法定代表人

第十九条 执行董事为公司的法定代表人，任期三年，由股东会选举产生，任期届满，可连选连任。

第二十条 法定代表人行使以下职权：

(一) 召集和主持股东会议;

(二) 检查股东会议的落实情况，并向股东会报告;

(三) 代表公司签署有关文件;

(四) 在发生战争、特大自然灾害等紧急情况下，对公司事务行使特别裁决权和处置权，但这类裁决权和处置权须符合公司利益，并在事后向股东会报告;

(五) 公司章程规定的其他职权。

第七章 股东会会议认为需要规定的其他事项

第二十一条 股东之间可以相互转让其部分或全部出资。

第二十二条 股东向股东以外的人转让股权，应当经其他股东过半数同意。股东应就其股权转让事项书面通知其他股东征求同意，其他股东自接到书面通知之日起满三十日未答复的，视为同意转让。其他股东半数以上不同意转让的，不同意的股东应当购买该转让的股权;不购买的，视为同意转让。

经股东同意转让的股权，在同等条件下，其他股东有优先购买权。两个以上股东主张行使优先购买权的，协商确定各自的购买比例;协商不成的，按照转让时各自的出资比例行使

优先购买权。

第二十三条 公司的营业期限30年，自公司营业执照签发之日起计算。

第二十四条 有下列情形之一的，公司清算组应当自公司清算结束之日起30日内向原公司登记机关申请注销登记：

(一) 公司被依法宣告破产;

(二) 公司章程规定的营业期限届满或者公司章程规定的其他解散事由出现，但公司通过修改公司章程而存续的除外;

(三) 股东会决议解散;

(四) 依法被吊销营业执照、责令关闭或者被撤销;

(五) 人民法院依法予以解散;

(六) 法律、行政法规规定的其他解散情形。

第八章 附 则

第二十五条 公司登记事项以公司登记机关核定的为准。

第二十六条 公司章程经股东签字后生效。

第二十七条 本章程一式叁份，并报公司登记机关一份。

全体股东签字：

年 月 日

最新外贸业务员实习报告

为了使我们能将书本上学习到的理论知识和实践相结合，更一步学习和巩固进出口业务工作的基本知识和基本技能，学校为我们2017级国际经济与贸易专业的学生开设了外贸业务实习这门课程。我觉得这是一门实操性很强的课程，通过学习，让我更熟悉进出口的业务流程和填单制单等的具体工作，为我将来从事与国际经济与贸易相关的工作打下坚实的基础。与此同时，我也反省自己，深刻认识到自己的不足。

我们这次的外贸业务实习主要是利用对外经济贸易大学开发的世格软件simtrade外贸实习平台和外贸单证教学系统进行的。sintrade外贸实习平台主要是利用 simtrade 提供的各项资源，做好交易前的准备工作，学会运用网络资源宣传企业及产品，像发广告和信息等，然后通过邮件系统进行业务磋商，掌握往来函电的书写技巧，同时，还要掌握不同贸易术语在海运、保险方面的差异。在询盘、发盘、还盘、接受环节的磋商过程中，灵活使用贸易术语cif、cfr、fob与结算方式l/c、t/t、d/p、d/a，正确核算成本、费用与利润，以争取较好的成交价格，并根据磋商内容，正确使用贸易术语与结算方式签订外销合同。所以，我们需要熟悉四种主要贸易术语l/c、t/t、d/p、d/a的进出口业务流程，根据磋商内容做好备货工作，正确签订国内买卖合同。接着就是我较为薄弱的一个环节，正确填写各种单据 ，包括出口业务中的报检、报关、议付单据，进口业务中的信用证开证申请。因为这是我第一次正真的填单，刚开始对于开证、审证、审单要点都不是很熟悉，需要对着操作指南一步步来。心里想，如果现在真的是去工作，我这样的工作效率肯定是不合格的，所以要趁现在这个实习的机会，多熟悉各个环节，尽可能尽善尽美。simtrade外贸实习平台是系统自动评分，评分标准包括基本资料、单据制作、财务状况、库存状况、供求信息、邮件管理、业务能力等七项，所以我们在模拟进行业务时，需要多找不同的交易对象和不同的产品，另外 4 种成交方式和 3 种价格术语要搭配使用，当然，你的利润越高，你的分数也会有相应的增长，所以在整个交易过程中，我必须合理利用各种方式控制成本以达到利润最大化。sintrade外贸实习平台是分角色的，老师要求我们担当出口商、进口商和工厂三个角色并完成相应的任务，出口商和进口商需要完成至少5 笔以上出口业务，l/c、d/p、d/a、t/t各1笔，工厂需要完成至少4 笔以上业务。虽然这只是一个模拟的操作平台，却仍然让我感觉很真实，让我体会到国际贸易中不同当事人的不同地位、面临的具体工作与互动关系。而另一个实习的平台外贸单证教学系统则是让我们更熟悉各种邮件和单证的填写，老师也会按照完成的情况打出相应分数并会给出正确的参考样本，将这些正确的参考样本收集下来就成了我积累的知识财富。

通过实习，我对国际贸易实务各个环节又有了更深的印象，确实，实际操作和平时理论知识的学习感觉是有差异的。你不去实践还不知道原来自己对于进出口的业务流程是如此不熟悉，自己原本还觉得还行啊!教我们国际结算的詹老师常说：“纵向的流程，横向的技能。”这次实习还真是感受到它存在的真理性。如果流程你都不熟悉，你怎么知道自己应该做什么，难道实际工作中还要拿着操作流程指导吗?我还有一个薄弱项就是进出口预算表的填写，因为实习中的数据告诉我，我计算的准确率是从来没有百分之百正确过，某些部分的计算和实际结果是有差别的。外贸业务讲究单证相符，如果一个地方算错，接下来的各种单据的制作就会跟着出错，所以作为将来可能从事外贸的我们需要有足够的耐心和细心。

经过这次外贸业务的实习，我更加认识到自己的优缺点，同时，也重新评估了自己的实际能力，更熟悉外贸实务的具体操作，并进一步巩固、 深化已学过的理论知识，提高了综合运用所学知识发现问题、解决问题的能力，真正做到理论与实际相结合，为将来自己从事与国际经济与贸易相关的工作打下更坚实的基础。

国际货物贸易合同范本3篇

国际贸易是一张由合同组成的网,一项最普通的国际贸易,一般也会涉及到货物买卖、货物运输及信用证等合同。在这些合同中,买卖合同可以说是整个交易的中心。以下是第一范文网小编为大家精心准备的3篇国际货物贸易合同范本。欢迎参考阅读!

国际货物贸易合同范本一

合同编号：__________________

卖方：________________________________

地址：________________________________

电报挂号：____________________________

买方：________________________________

地址：________________________________

电报挂号：____________________________

日期：________________________________

签约地点：____________________________

兹经卖买双方同意成交下列商品订立条款如下：

1.商品：__________________

2.规格：__________________

3.数量：__________________

4.单价：__________________

5.总价：______U.S.D.(大写：__________)

6.包装：__________________

7.装运期：________收到信用证后________天

8.装运口岸和目的地：从____经____至____。

9.保险：________________________

10.付款条件：______________________

(1)买方须于____年____月____日前将保兑的、不可撤销的、可转让、可分割的即期信用证开到卖方。信用证议付有效期延至上列装运期后，____天在____到期。

(2)买方须于签约后即付定金__________%。

11.装船标记及交货条件：货运标记由卖方指定。

12.注意：开立信用证时请注明合同编号号码。

13.备注：____________________

卖方：______________________

买方：______________________

注：格式合同亦称标准合同(Standard Contract)。在国际贸易买卖中，由一个国际组织或外贸商业组织或律师事务所根据买卖合同应具有的基本内容而拟定的固定条文，即成固定格式的空白标准合同。经双方当事人签字后，才能成为有效的合同，对双方当事人都有法律的约束力。

国际货物贸易合同范本二

合同编号

日 期：

中国化工进出口总公司(以下简称卖方)和株式会社(以下简称买方)双方经过友好协商，同意按照以下两部分条款签订本合同：

第一部分

一、商品品名：胜利原油

二、数量：吨

(换算原油重量按 gb1884-80方法进行)

三、规格：指标项目 试验方法

①密度：克/立方厘米 p20°c最高0.920 gb 1884-80

②含硫：重% 最高0.9 gb 387-64

③含水：重% 最高1.0 gb 260-77

四、价格：本合同各交货期的具体价格原则上与86xoil25j号合同，同一交货期有效的价格一致。

五、交货期：

一九八六年第1季度 吨

第2季度 吨

第3季度 吨

第4季度 吨

上述各季度的装船月份由买方选定，但应在各季度前月15日以前通知卖方。

六、装船口岸：中国青岛港。

七、目的口岸：日本国港口。

八、付款条件：买方应于货物装船前十天，按本合同第二部分第三条①款双方商定的装船数量及期限，通过双方同意的银行开出以中国化工进出口公司山东省分公司为受益人的，不可撤销的可转让的，可分割的美元信用证。该信用证凭受益人出具的以开证行为付款人的汇票以及本合同第一部分第九条所规定的各项单据，自提单日起三十天(包括提单日在内)，由开证行将货款电汇中国银行。信用证金额应按双方商定的交货数量增开5%。信用证上须证明租船提单可以接受。

九、单据：

①卖方在货物启运后，应向议付银行提供下列单据作为议付货款的依据：

a)发票四份;

b)清洁装船提单正本二份;

c)由商品检验局出具的质量检验证书，重量鉴定证书及产地证明书各一份。

②卖方须将上述单据中的清洁装船提单副本二份，随船带交目的港买方指定的收货人。其余单据副本二份航寄买方。

十、附注：

①本合同第一部分各条款尚未规定的事项，应按本合同不可分割的第二部分的各条款以及由双方随时协商后决定的条款履行。

②本合同的执行由 商事株式会社开立信用证。

③本合同项下的数量双方应努力执行，但如买方或卖方在接货或供货方面有困难时，双方对本合同的履行均可不承担责任。

④本合同第一部分以中日两国文字书就正本一式两份，买卖双方各持一份为证。两种文本具有同等效力。

卖 方：中国化工进出口总公司

买 方：

地 址：北京西郊二里沟 地 址：

电报挂号：sinochem beijing 电报挂号：

电 传：22243 chemi 电 传：

22553 chemi

第二部分

一、总则：本部分条款与第一部分条款在本合同中是不可分割的两部分。

二、交货条件：

①货物所有权及风险的转移，以装港岸上输油臂与油轮集输油管连接点作为分界线，货物通过该连接点时，由卖方转移到买方，卖方交货责任即告终止。

②买方所派油轮，禁止在中华人民共和国沿海水域排放油类或油性混合物。油轮进港后，应根据港口当局的规定把压舱污水排放在处理池内，费用由买方负担。

③买方所派油轮在装货港，应遵守当地行政当局所规定的有关油轮作业安全规则。

④买方所派油轮载重吨不得超过六万吨，满载最大吃水不得超过12.5米。油轮长度不得大于230米。如买方所派油轮不符合上述规定时，必须事先征得卖方同意，否则由此所造成的港口当局拒绝油轮靠栈桥，或发生空舱及与此有关的损失均由买方负担。

⑤由于卖方的原因，如在装货港需要移泊或用油驳装货时，其费用由卖方负担。但由于买方的原因，如需要移泊或用油驳装货时，其费用由买方负担，由于人力不可抗拒的原因，为了确保油轮的安全，装船移泊费用由买方自理。

⑥每批装船数量允许增减5%，由买方选择。

三、装船通知：

① 买方应在装船月15天前电告卖方派船计划，包括船名，预抵装港日期，装运数量。卖方接到买方派船计划后，应在五天内电复买方接受或可以接受的预抵装港日期和装运数量。买卖双方对油轮预抵装港日期或装运数量的意见不一致时，双方协商安排一个都可以接受的日期，装运数量，或者安排另外一些油轮来接货。双方商妥的油轮预抵装港的日期叫做“确认日期”。

②买方应按双方商妥的“确认日期”派油轮抵达装港。卖方应及时装货。如买卖双方因特殊原因要求更改“确认日期”或装运数量时，对方根据储罐，泊位和供货或接货的可能以及油轮安排的可能，应在两天内电复可以接受或不可接受。如油轮在“确认日期”以前或以后抵达装港，卖方应做出最大努力尽快装货。

③买方在本条①款通知派船计划时，已列明预抵装港日期及装运数量，但注明船名待定时，买方应最迟在确认日期十天前将船名电告卖方。

④双方商妥“确认日期”的油轮，允许买方按同一“确认日期”，同一装运数量和装货港口可以接受的船型另派油轮代替。但买方最迟应在“确认日期”前五天将代替油轮的船名等有关情况通知卖方。

⑤买方在油轮抵达装港前五天电告卖方(包括装港卖方分公司)及装港中国外轮代理公司预报船名，船籍，预抵装港日期，装运数量，买方应指示船长在油轮抵达装港前48小时和24小时及6小时向卖方(包括装港卖方分公司)及装港中国外轮代理公司报告预抵装港的时间。

⑥装船完毕后，卖方应在24小时内以电报通知买方：合同号，品名，密度(注明换算温度)，含硫量%，含水量%，船名，收货人，装运数量，发票单价，总值，提单日，离泊时间。

四、装货定额：

①油轮抵达装港后，具备装货条件时，船长通过装港外轮代理公司应在办公时间内以书面或vhf电话向装港卖方或外轮代理公司提出备装通知书并同时确认。装船作业开始时间按以下规定计算。

按“确认日期”抵装港的油轮，以确认备装通知书六小时后开始起算。但如在确认备装通知书后不到六小时装油时，以开装时间起算。

在“确认日期”前一天办公完毕时间(从5月1日至9月30日：18：00，从10月1日至4月30日：17：00时)前抵装港的油轮，在办完入港手续后，如有条件提前装油者，以开装时间起算，没有条件装油者，则以确认日上午八时起算。

在“确认日期”前一天从办公完毕时间至24：00时抵装港的油轮，在办完入港手续后，如有条件提前装油者，以开装时间起算，如没有条件者，则以确认日下午二时起算。在“确认日期”以后抵装港的油轮，以开装时间起算。

②自起算装船作业时间开始，卖方应在36小时内将整船货物装完，除大风雷雨天气及港务当局另有规定外，应日夜连续装货。

③由于下列情况耗费的时间，均不计算在装货作业时间以内：

(一)由于大风，雷雨等恶劣天气而不能进行作业的时间。

(二)港务当局由于安全原因不准靠栈桥而在港内停留的时间及港务当局禁止装船的时间。

(三)排放压舱污水至验舱完毕的时间。

④以拆卸输油管线完毕时间作为装货作业的完毕时间。

⑤因码头装货设备故障而发生的滞期费按本部分第五条第①项所规定的运费率的50%计算。

五、滞期费：

①卖方若未能按本部分第四条②款所规定的装货定额时间装货完毕，则卖方应向买方交付滞期费,滞期费应以双方确认的装船数量作为它的船型,每日滞期费应以worldscale 所规定的基数(以提单日期为准)乘相应的afra运费率计算。

②油轮在装货港口的动态，以装港外轮代理公司编制的并经船长签字确认的装货时间事实记录为准，卖方应在装货后三十天内向买方提供装货时间事实记录一份。

③买方向卖方提出的滞期费，经卖方审核属实后，应以美元现汇支付。

④ 如果买方向卖方提出滞期索赔，须在船抵目的港后60天内提出。

六、商品检验：

①重量的鉴定由装船口岸国家商检局出具的重量鉴定证书为准。提单数量应根据重量鉴定证书填写。重量鉴定证书及提单所列数量作为买卖双方交货数量的依据。

② 品质的检验：由装船口岸国家商检局按 syb20xx-59 石油产品试样法取样，混合后分装三份作为卖方所交货物的标准样品。

上述三份样品之中的一份将交给油轮船长。其余二份均交中华人民共和国国家进出口商品检验局，一份供化验用，一份装货后保存六十天。

国家商检局经化验后所出具的品质证书作为卖方所交货物的品质依据。

七、投保油污责任险：

①买方所派油轮应加入基于1969年《国际油污民事责任公约(clc)》第七条的金额保证(p & i club保险)以及tovalop协定。

②由买方所派油轮，当在装港遇事故而发生油类和油类混合物的污染或有发生这类污染的可能性时，船东或船长应迅速采取清除措施，防止油污而造成的损失，或为避免油污损失进一步扩大所采取合理而有效的措施。但船东或船长不采取上述措施时，卖方在通知船东或船长之后，可以采取合理的必要的措施进行清除工作和减轻油污可能造成的损失。卖方应随时将所要采取的措施和后果告诉船东或船长，如时间允许，应在采取措施前，将拟采取的措施告诉船东或船长。卖方采取的上述措施可以认为是按船东或船长委托进行的。在这种场合，对于被委托者采取的措施，委托者有权按实际情况向对方提出异议或者通知其停止工作。委托人提出通知后，被委托者则应无权再继续进行工作。

③卖方或船东船长采取的上述措施均不得与1969年《国际油污损害民事责任公约(clc)》及tovalop协定的规定相抵触。

八、人力不可抗拒：如因人力不可抗拒的事故不能按时交货时，卖方可以延期交货或部分延期交货或取消合同，但卖方应向买方提交由中国国际贸易促进委员会开具的发生事故情由的证明文件。如因人力不可抗拒的事故不能按时接货时，买方可以延期接货或部分延期交货或取消合同，但买方应向卖方提交由日本国际商事仲裁协会签发的证明文件。

九、罚款：如买方除本部分第八条规定以外未按合同规定执行，以致本合同全部或一部分不能按期执行，而使卖方遭受损失时，买方应承付罚金，罚金分别为合同总值或未能执行部分总值的1%。如卖方除本部分第八条规定以外未能全部或一部分履约交货而使买方遭受时损失，卖方应承付罚金，罚金分别为合同总值或未能履行部分总值的1%。

十、仲裁：因执行合同所发生的或者与本合同有关的一切争议，首先应由签订合同双方友好协商解决。如经协商后尚不能解决，应提交仲裁，不向法院申诉。仲裁在被告所在国进行。 在中国，在中国国际贸易促进委员会对外贸易仲裁委员会根据该委员会的仲裁程序规则进行仲裁。在日本，由日本国际商事仲裁协会根据该协会的仲裁程序规则进行仲裁。仲裁裁决是终局裁决，签订合同双方都应执行。

十一、本合同第二部分以中，日两国文字书就，两种文本具有同等效力。

国际货物贸易合同范本三

__年__月__日__为卖方和__为买方。双方同意买卖__，其条款如下：

1.合同货物：____

2.产 地：____

3.数 量：____

5.合同价格：____fob____

6.包 装：____

7.付款条件：签订合同后买方于7个银行日内开出以卖方为受益人的、经确认的、不可撤销的、可分割、可转让的、不得分批装运的、无追索权的信用证。

8.装船：从卖方收到买方信用证日期算起，45天内予以装船。若发生买方所订船舶未按时到达装货，按本合同规定，卖方有权向买方索赔损毁/耽搁费，按总金额__%计算为限。因此，买方需向卖方提供银行保证。

9.保证金：卖方收到买方信用证的14个银行日内，向买方寄出__%的保证金或银行保函。若卖方不执行合同，其保证金买方予以没收。

10.应附的单据：卖方向买方提供：

(1)全套清洁提货单;

(2)一式四份经签字的商业发票;

(3)原产地证明书;

(4)装箱单;

(5)为出口____所需的其他主要单据。

11.装船通知：卖方在规定的装货时间，至少14天前用电报方式将装船条件告知买方。买方或其代理人将装货船估计到达装货港的时间告知卖方。

12.其他条款：质量、数量和重量的检验可于装货港一次进行。若要求提供所需的其它证件，其办理手续费、领事签证费应买方负担。

13.装船时间：当日13：00或次日8：00装船。

14.装货效率：每一个晴天工作日，除星期日，节假日外，每舱口进货为__立方吨。

15.延期费/慢装卸罚款：对于____载重吨船来说，每天____u.s.d.。

16.不可抗力：签约双方的任何一方由于台风，地震和双方同意的不可抗力事故而影响合同执行时，则延迟合同的期限应相当于出事故所影响的时间。

买方：____ 卖方：____

证人：____ 证人：____

日期：____ 日期：____

使用说明

一、本公约为示范文本。

二、在前期物业管理期间，由建设单位根据本示范文本制订业主公约，并在物业销售前向物业买受人明示;物业买受人与建设单位签订物业买卖合同时应当对遵守业主公约作出书面承诺;业主大会成立后，由业主大会根据本示范文本制订或修改业主公约。

三、使用者可在示范文本条文之外增加认为有必要补充的内容。

第一条 为维护本物业管理区域全体业主、非业主使用人在物业管理活动中的合法权益，维护公共环境卫生和正常秩序，保障物业的安全与合理使用，建设管理有序、服务完善、环境优美、文明和谐的新型社区，根据有关法律法规制定本公约。

第二条 本物业的基本情况

(一)物业名称：

(二)坐落位置(附图)：

(三)物业总建筑面积：

(四)物业类型：

(五)土地宗地号：

(六)物业及配套设施的产权清单：

第三条 本公约对本物业管理区域全体业主和非业主使用人均具有约束力。物业的所有权人发生变更时，公约的效力及于物业的继受人。

第四条 全体业主一致同意在业主大会成立前，由建设单位聘请的物业管理公司根据物业管理服务合同对本物业进行物业管理服务。

第五条 业主在物业管理活动中依照有关法律、法规的规定和本公约的约定，享有相应的权利，履行相应的义务。

业主转让或出租物业时，应将本公约向受让人或承租人明示，并应将物业转让或出租情况书面告知物业管理企业。

第六条 本物业管理区域应按照有关法规的规定成立业主大会，选举产生业主委员会。

第七条 本物业管理区域的业主大会应当制定《业主大会和业主委员会议事规则》。

第八条 业主应参加业主大会会议，协助业主大会、业主委员会、物业管理企业以及相关单位在物业管理方面的工作。

第九条 业主同意按照有利于物业使用、安全以及公平、合理的原则，正确处理供水、排水、通行、通风、采光、维修、装饰装修、环境卫生、环境保护、房屋外观等方面的关系。

第十条 业主、非业主使用人应当按照规划部门批准的用途使用物业，不得擅自改变物业的使用功能。

第十一条 业主对物业专有部分的使用、维修、养护行为不得妨碍其他业主的合法权益和业主的共同利益。

第十二条 业主装饰装修物业时应遵守以下约定：

(一)应当事先告知物业管理企业，并与物业管理企业签订装饰装修管理协议。

(二)应在指定地点放置装饰装修材料及垃圾，不得擅自占用共用部位和公共场所。

(三)业主装修时应严格遵守装修施工时间(上午 时至 时，下午 时至 时)，已有业主入住的，晚间 时至次日上午 时，中午 时至 时以及节假日，不得从事敲、凿、锯、钻等产生严重噪声的施工。

(四)按规定可以安装防盗网的，应按照统一的标准制作安装，以保持物业区域外观统一。

(五)业主应遵守装修管理协议，因违反装饰装修管理协议而影响物业用电、用水、供气、通讯、有线电视等使用功能的，应承担相应责任。

(六)因装饰装修房屋影响共用部位、共用设施、设备的安全使用以及侵害相邻业主合法权益的，业主应及时恢复原状并承担相应的赔偿责任。

第十三条 物业在使用中存在安全隐患，已经或者即将危及公共利益及他人利益的，责任人应当及时应急维修;责任人不履行或者无法履行应急维修义务的，物业管理企业可在社区工作站(社区居民委员会)、业主委员会有关人员到场见证下进入物业内部应急维修;维修所需的费用由责任人承担。

第十四条 因维修养护物业需要进入相关业主的物业专用部分时，业主或物业管理企业应事先告知相关业主，相关业主应给予必要的配合。

相关业主阻挠维修养护造成物业损坏及其他损失的，应负责修复并承担赔偿责任。

第十五条 业主应当按设计预留的位置安装空调，未预留设计位置的，应按物业管理企业指定的位置安装，并按要求做好噪音及冷凝水的处理。

第十六条 业主及非业主使用人使用电梯应遵守本物业区域的电梯使用的有关规定。损坏电梯设备的，应承担相应的赔偿责任。

第十七条 物业区域的车辆行使、停放应遵守本区域停车场使用规定和使用协议。

第十八条 依照有关规定饲养犬只的，在犬只外出时应为犬只戴防护口罩、佩束犬链，并由成年人牵领、看管，即时清除犬只排出的粪便。

第十九条 本物业管理区域禁止下列行为：

(一)擅自改变房屋的结构和外貌;

(二)擅自占用或损坏公共楼梯、扶栏、走道、地下室、平台、外墙、屋面等共用部位，擅自移动或损坏共用设施、设备;

(三)擅自在天井、庭院、平台、屋顶、绿地、道路等共用部位、共用场地搭建(构)筑物;

(四)擅自摆设摊点;

(五)侵占或损坏道路、绿地、花卉树木、艺术景观及文体休闲设施;

(六)乱抛垃圾杂物和高空抛物;

(七)违反有关规定堆放易燃、易爆、剧毒、放射性物品，排放有毒有害物质;

(八)室内不得制造超标准噪声，包括大音量播放电视、音响，举行喧闹的聚会、舞会，机器设备噪声等;

(九)违反规定在物业管理共用部位和相关场所悬挂、张贴和乱涂乱画;

(十)违反有关规定饲养家禽、家畜及宠物;

(十一) ;

(十二)法律、法规禁止的其他行为。

第二十条 业主应按照有关规定交纳、使用和管理维修基(资)金。

第二十一条 业主利用物业共用部位、共用设施设备设置广告或进行其他经营活动的，应当征得有关业主、业主大会的同意，并按照规定向物业管理企业办理有关手续。

按照前款规定获取的收益，按下列第 种方式处理：

(一)纳入管理费;

(二)纳入维修基(资)金;

(三) ;

(四) 。

第二十二条 业主未按规定交付物业管理服务费的，物业管理公司应当督促其限期交付，业主逾期仍不交付的，业主委员会或其委托的物业管理企业可以在物业管理区域内公布物业管理服务费收交情况，并注明欠交费用的业主姓名、楼座房号进行催缴;仍不交付的，物业管理企业可以依法向人民法院提起诉讼。

业主与非业主使用人约定由非业主使用人交纳物业管理服务费用的，从其约定，业主负连带交纳责任。

第二十三条 全体业主同意在物业管理服务活动中授予物业管理企业以下权利：

(一)根据有关法律法规、本公约和物业管理服务合同，制定必要的规章制度，并督促业主和非业主使用人遵守、执行;

(二)采取批评、规劝、警告等方式制止业主和非业主使用人违反本公约的行为;

(三)在物业管理区域内公布不遵守公约及相关法律法规的业主、非业主使用人的姓名及违约事实;

(四) 。

第二十四条 其他补充条款

(一) 。

(二) 。

(三) 。

第二十五条 建设单位依法制订的业主公约自本物业的第一个买受人签字后生效( 年 月 日)。

业主大会对公约进行修改的，修改后的公约经业主大会通过之日起生效。

附件：(略)

立合同者：_________________*百货商店(以下简称甲方)，向*纺厂(以下简称乙方)。

为了繁荣市场，保证*的供应，经双方协商，签订本合同，以资共同遵守。

一、由甲方向乙方订购一等品毛华达呢20__米，每米单价45元。

二、分两批于八、九月的每月15日前交货，由乙方运至甲方所在地，运费由乙方负责。

三、付款办法采取银行托付。货款在签合同时预付40%，其余60%待交货完毕后一周内付清，均通过银行转帐付款。

四、质量标准。如果质量不合议定标准，按部颁标准验后重新估价，乙方除赔偿损失外，还应付给甲方损失总值的千分之三的罚金。

五、双方按规定日期交付货物或货款，逾期不履行合同。且每延期一天，违约方须按货款总额的千分之一计算罚金付给对方。

六、合同由向阳市工商行政管理局鉴证后生效，一式三份，甲乙双方和鉴证机关各执一份。

甲方(盖章)：_______________乙方(签字)：_______________

________年________月________日________年________月________日

国内水路、铁路货物运输保险合同

第十一条 被保险人向保险人申请索赔时，必须提供下列有关单证：

1. 保险凭证、运单（货票）提货单、发货票；

2.承运部门签发的货运记录、普通记录、交接验收记录、鉴定书；

3.收货单位的入库记录、检验报告、损失清单及救护货物所支付的直接费用的单据。

保险人在接到上述索赔单证后，应当根据保险责任范围，迅速核定应否赔偿。赔偿金额一经保险人与被保险人达成协议后，应在10天内赔付。

第十二条 货物发生保险责任范围内的损失时，按货价确定保险金额的，保险人根据实际损失按起运地货价计算赔偿；按货价加运杂费确定保险金额的，保险人根据实际损失按起运地货价加运杂费计算。但最高赔偿金额以保险金额为限。

第十三条 如果被保险人投保不足，保险金额低于货价时，保险人对其损失金额及支付的施救保险费用按保险金额与货价的比例计算赔偿。保险人对货物损失的赔偿金额，以及因施救或保护货物所支付的直接、合理的费用，应分别计算，并各以不超过保险金额为限。

第十四条 货物发生保险责任范围内的损失，如果根据法律规定或者有关约定，应当由承运人或其他第三者负责赔偿一部或全部的，被保险人应首先向承运人或其他第三者索赔。如被保险人提出要求，保险人也可以先予赔偿，但被保险人应签发权益转让书给保险人，并协助保险人向责任方追偿。

第十五条 保险货物遭受损失后的残值，应充分利用，经双方协商，可作价折归被保险人，并在赔款中扣除。

第十六条 被保险人从获悉或应当获悉货物遭受损失的次日起，如果经过180天不向保险人申请赔偿，不提出必要的单证，或者不领取应得的赔款，则视为自愿放弃权益。

第十七条 被保险人与保险人发生争议时，应当实事求是，协商解决，双方不能达成协议时，按下列第＿＿＿＿＿种方式解决：

（一）提交＿＿＿＿＿＿＿＿＿＿＿仲裁委员会仲裁；

（二）依法向人民法院起诉。

国内货物运输险投保单

编号：＿＿＿＿＿＿＿

我处下列货物拟向你处投保国内货物运输险：

┏━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┓

┃被保险人 ┃

┠───────────┬──────┬──┬────────┬──────┨

┃标记或发票号码 │保险货物名称│件数│提单或通知单号次│保险金额 ┃

┠───────────┼──────┼──┼────────┼──────┨

┃ │ │ │ │ ┃

┠─────────┬─┴──────┼──┴────────┼────┬─┨

┃运输工具（及转载工│ │约于 年 月 日 启运│赔款偿付│ ┃

┃具） │ │ │地点 │ ┃

┠─────────┼────────┼─────┬─────┴────┴─┨

共3页，当前第2页123

运输是把产品从生产地运往消费地的活动，因此从整个社会生产过程来说，运输是在流通领域内继续的生产过程，并在其中完成。以下是小编为大家整理的包车运输合同模板精选3篇，供大家参考学习。

包车运输合同模板1

甲 方： 乙 方：

执照号码： 身份证号：

公司地址： 户口地址：

公司电话： 现住地址：

负 责 人： 联系电话：

甲乙双方本着互惠互利、平等自愿的原则，经友好协商，就有关乙方承包甲方车辆开展经营车辆运输业务事宜达成如下内容：

第一条：承包方式

一.乙方自愿承包甲方的车辆用以开展运输业务，甲方提供自有车辆一部供乙方使用，乙方按甲方的调度安排运送货物，双方按约定的比例分成;

二.在本合同期限内,车辆所有权属于甲方,乙方根据本合同之规定仅享有车辆使用权;

三.乙方一次性向甲方缴纳履约保证金人民币30000元，该保证金将在本合同解除或终止之日起7个工作日内经甲方结算之后无息退还给乙方;

四.乙方承接超过500公里的长途运输任务时，必须配备副班驾驶员一名，乙方负责自行聘请副班驾驶员并承担其劳务费，为其购买相关社保和人身意外险;

五.乙方及乙方聘请的副班驾驶员必须服从甲方的领导和管理调度，严格遵守交通法则，操作规程和甲方制订的各项规章制度、劳动纪律、驾驶员考评制度等。

第二条 车辆资料、交接与收回

一、 车辆资料：

车辆牌号： 拖架车牌： 厂牌型号： 车架号： 发动机号：

二、车辆的交接与收回

1、甲乙双方交接车辆时，应仔细检查车辆及相关证件，由双方相关人员共同在车辆交接单上签字确认，并对车辆、随车工具附件及证件的相关价值予以确认。

2、乙方交回车辆时，应按规定的内容完整地交回车辆、随车工具和相关证件，如有损坏或遗失应照价赔偿。

3、双方在进行交接前，应由交车方对车辆进行一次全面二级保养与维护。

4、双方在交接车辆前，必须对全车轮胎进行估价，并按双方认可的价值进行结算。

第三条：费用分担

一.甲方承担：

1.车辆固定的成本费用：养路费、运管费、车船税、车辆保险费、物流责任险费用、二级维护卡盖章费、综合检费、年检费、海关本年审费、G安装及服务费等。

2.正常的二级维护(车辆行驶里程每满16000公里，按照公司标准在指定修理厂进行强制保养一次);发动机、后桥首次大修以30万公里为标准里程(超过30万公里由公司承担;未达到30万公里发生大修，不足部分按公里数折算维修费由司机个人承担);

第二次大修以20万公里为标准里程(20万公里以后由公司承担，未达20万公里由司机承担不足部分的维修费);离合器修理以10万公里为标准里程(10万公里以后由公司承担，未达10万公里由司机承担不足部分的维修费)。

3.轮胎更换以10万公里为标准里程，(如使用不当，不足10万公里进行更换的由司机承担费用)。

二.乙方承担:

1、除上述甲方承担的费用以外，车辆营运过程中产生的其它费用(包括油费、路桥费、异常修理费等均由乙方承担)。

2、因违反交通规则而被抄牌等发生的罚款由乙方承担。

三.如乙方发生交通事故，按照交警部门或保险公司出具的责任认定书，保险公司赔付后不足部份加处理事故产生的一切费用按以下标准划分承担(乙方聘请的驾驶员发生交通事故由乙方承担)：

1.认定乙方为全责：甲方不承担责任，乙方承担100%;

2.认定乙方为主责：甲方承担20%，乙方承担80%;

3.认定乙方为平责：甲方承担50%，乙方承担50%;

4.认定乙方为次责：甲方承担70%，乙方承担30%;

5.认定乙方为无责：乙方无需承担责任。

第四条：结算方式

一.分成比例：以一个结算期内乙方完成的运输业务总的运费收入为基准，甲方占 3025%，乙方占 7075%。结算期为30天，每月15-____日之间结算上一个月的业务提成。

二.运价：承包期内采用不固定运价方式，以甲方公布的运价为准，以运价公布时间为结算起止时间，如乙方不认同甲方运价，在15个工作日内必须书面提出异议，经甲方同意可终止承包合同。

三.油补：公司跟据市场油价波动，临时公布油补方式和标准，结算时间以公布油补和停止油补通知时间为准。

四.甲方于乙方出车时，提供适当出车费给乙方(以公司规定出车款金额为准)，乙方每次任务完成后____日内向甲方提供承运业务所填写的托运单，并同时附带承运该业务的相关票据;甲方根据乙方所提供的托运单和相关票据，核对无误后编制乙方上月业务结算表提供给乙方签字确认。如乙方未能在规定日期内提供相关托运单及票据，则该月业务结算将顺延30天进行，如乙方对上月业务结算表有异议，必须在三个月内提出，超过三个月公司将不给予处理。

五.未经甲方同意，乙方在承运过程中，不能为甲方代垫支付任何费用。如有特殊情况，乙方可在征得甲方口头同意后代为垫付相关费用，但必须在垫付费用之日起5个工作日之内向甲方提供该费用的合法票据，并同时取得甲方相关人员的书面确认;超过上述期限，甲方不再负担该费用。

第五条：特别约定

一.甲乙双方需共同遵守法律、法规和交通规则，不得从事走私、偷税漏税等不法行为，否则一切后果由违约一方承担。如乙方因违法、违规而导致车辆被扣，造成不能按照甲方统一安排完成运输任务，乙方应赔偿甲方损失每日人民币500元整;

二.乙方不得以任何理由拒绝执行甲方指派或安排的运输任务，否则甲方有权立即终止与乙方的合同。

三.乙方未经甲方许可，不得擅自在甲方分配或安排的业务以外承接其它运输业务一经发现，甲方有权随时终止与乙方的合同并向乙方追讨赔偿，赔偿金额为当时市场运价的3倍，不足人民币5000元的，按5000元计算;

四.一切因乙方使用不当、违规操作导致的车辆损坏，其维修费用由乙方承担，

车辆维修时必须到甲方指定维修厂进行维修，否则甲方有权立即终止与乙方的合同;

五.如车辆在运输途中有任何事故，乙方必须及时通知甲方，根据甲方指示作相应处置，不得擅自行事如果由于乙方逾时通知甲方或擅自行事而造成直接经济损失，乙方需承担向甲方赔偿责任;

六.因乙方违反交通规则而被抄牌或罚款由乙方承担。乙方必须服从甲方运管、车管、财务、行政等管理部门的管理。

七.乙方手机必须24小时开机，以确保甲方随时可以联络到乙方，如有违反按驾驶员考核规定执行。乙方必须按时到达指定地点装卸货，要确保货物到达时完整无损交予收货人并点算清楚，同时按甲方规定及时交回货物签收单。

八.甲乙双方均须持有有效的证件。

九.乙方应妥善保管车辆证件，如有遗失，补办费用全部由乙方承担。

十.商业秘密保护：乙方对于因与甲方签订或履行本合同过程中，所有直接或间接获悉的甲方机密商业信息，包括但不限于甲方客户及交易的情况、甲方运输价格、甲方运输供应商情况、甲方与运输供应商的合作模式及其他营业秘密等均有保密义务。本合同因期满、解除或终止________年后，乙方保密义务自行消除。乙方违反本条保密义务时，应赔偿甲方因此所受的一切直接经济损失，甲方认为必要时，得请求乙方签署保密合同，乙方不得拒绝。

第六条：违约和违约处理

一 .甲方出现下列任何一种情况均构成违约：

1 .不能按时结算运费;

2 .违反国家法律、法规，违反本合同规定的其它条款和义务。

二 .如甲方违约，应承担违约责任并赔偿因违约而给乙方造成的直接经济损失。

甲方应按下列规定承担违约责任：

1 .不能按时结算运费，每逾期一天按未结运费的0 . 1 %收取滞纳金，并承担相应的法律责任;

2 .违反国家法律、法规，违反本合同规定的其它条款和义务，承担相应的法律和经济责任并赔偿因违约而给乙方造成的直接经济损失。

三 .乙方出现下列任何一种情况均构成违约：

1 .未按期缴纳本合同规定的各种费用;

2 .无正当事由提前解除合同;

3 .违反本合同规定的其它条款和义务。

四 .如乙方违约，应承担违约责任，并赔偿因违约而给甲方造成的直接经济损失，应按下列规定承担违约责任：

1 .未按期缴纳本合同规定的各种费用，每逾期一天按未缴纳税费的2%支付滞纳金，并承担相应的法律责任;

2 .无正当事由提前解除合同，应补偿按正常履约计可保证实现的年营业额未完成部分给甲方，并支付相当于按正常履约计可实现的年营业额20%的违约金;

3. 违反本合同

第五条规定的按其具体规定执行;

4 .对于乙方因违约责任而负担的赔偿金、违约金等，甲方可从应付乙方的运费中抵扣，不足部分从乙方缴纳的保证金中抵扣。

第六条：合同的变更和解除

一 .发生下列情形之一时，本合同允许变更和解除：

1 .由于地震、洪水、塌方、暴风雪等不可抗力使本合作合同无法继续履行;

2.由于本合同当事人一方的非主观原因，在本合同约定的时限内确实无法履行本合作合同;

3 .本合同当事人违约，使继续履行成为不可能或不必要;

4 .由于国家海关总署等部门关于进出口货物转关运输监管办法的重大调整使本合同的履行成为不可能或不必要;

5 .由于国家海关总署等部门对于保税区及保税货物监管政策的重大调整使本合同的履行成为不可能或不必要;

6 .由于国家主管部门对于进出口货物铁路运输方式的重大决策或改革使本合同的履行成为不可能或不必要;

7 .由于国家对公路货物运输规定作重大的调整，使本合同当事人一方履行本合同可能造成巨大损失的;

8 .经本合同当事人双方协商同意解除或变更。

二 .本合同所指不可抗力事件是指签约当时无法预见，发生当时无法避免并不能克服的事件。

三.合同一方因不可抗力不能履行合同时，应当及时通知对方，以减轻可能给对方造成的损失，并应当在事故发生后15个工作日内向对方提供事故发生地有关政府部门出具的事故证明报告，在政府部门不便出具有关事故的证明时，可提供事故发生后全国或当地主要政府报刊关于事故发生的详细报道资料。

四 .变更或解除合同，应当以书面形式(包括电子邮件)提出或答复。

第八条：争议的解决方式

一 .本合同履行期间，甲乙双方所发生的损害、债务及赔偿金额等全部责任在本合同结束后将继续有效，直到最终了结。

二 .对本合同发生的争议，甲乙双方应友好协商解决。协商不成，双方均可向____市人民法院提请诉讼。

第九条：合同生效及其他事项

二 .本合同有效期为________年，自________年____月____日起生效，至________年____月日止，届时双方若无异议并予以书面确认，可顺延。合同正本一式两份，双方各执一份。

三.本合同未尽事宜，双方将另行商定。

甲方： 乙方：

签章： 签章：

日期：____日期：

包车运输合同模板2

订立合同双方：

__县__乡__村，以下简称甲方;

__县__乡__村__村民，以下简称乙方。

为了调动机动车辆驾驶员的积极性，加强驾驶员爱护车辆的责任心，充分发挥机动车辆的作用，更好地为发展工副业和农业生产服务，增加集体和个人的收入，经社员代表会议认真讨论和甲乙双方充分协商，特签订本合同，供双方共同遵守。

第一条 承包机动车辆的型号、吨位及机械状况

第二条 承包期限

承包期限为________年，即从________年____月____日起至________年____月____日止。

第三条 上交承包费的数量、时间及办法

乙方在承包期内共向甲方上交承包费__元，其中，________年上交__元，________年上交__元，________年上交__元，……。每年分__次上交，以现金支付，甲方收费后即出具收据。

第四条 甲方的权利义务

1.甲方应将承包机动车辆完好地交给乙方，并随车交付下列工具给乙方使用：

2.根据县XX公司分配给农村机动车辆的燃料指标，合理分配给乙方购买。

3.甲方有权督促乙方履行合同规定的义务。

第五条 乙方的权利义务

1.按时按量完成承包费的交纳任务，负担车辆的维修费，配件、燃料、养路费、税金及车检费、保险费。

2.爱护车辆，适时维修和保养车辆，保证车辆设备和车容完好，能够正常运转。

3.遵守交通规则和机动车辆操作规程，严禁违章驾驶和酒后行车，保证行车安全，乙方应负担因乙方的责任造成的他人生命和财产损失。

4.乙方在经营运输中不得违反国家的政策和法律。乙方应对与

第三方之间的经济合同负独立责任。

5.乙方完成每年上交甲方的承包费用后，超收部分归自己，甲方不得另派加收费项目。

6.合同期满，乙方应将机动车辆检修后，交甲方检验接收，并随交修车工具。

第六条 甲方的违约责任

1.甲方交给乙方的机动车辆如有损坏，应承担一切修理费用，并赔偿乙方因此所受的损失。甲方提交的工具如与合同规定的种类、数量不符，应按所欠工具的价格补偿乙方。

2.甲方如果克扣乙方应得的燃料指标，每克扣一公升，应向乙方

偿付违约金__元。

第七条 乙方的违约责任

1.如不按时按量完成向甲方上交承包费的任务，每拖欠一天，应按照银行关于拖延付费的规定向甲方偿付违约金。

2.如不按时交付车辆修理费、配件、燃料、养路费、车检费及税金，乙方应承担有关单位的经济制裁。乙方如不按时向保险公司投保，甲方可代为投保，然后凭保险费收据要求乙方付款。

3.乙方如因交通事故或意外事故造成车损人伤(亡)，应从保险金额中支付赔偿。

第八条 不可抗力

如因不可抗力的原因造成乙方不能正常开展营运，经有关部门证实后，甲方应据实酌情减少乙方的承包费。

第九条 其它

本合同自承包开始之日起生效，合同期满自然失效。在合同执行期间，甲乙双方的任何一方均不得擅自改变或解除合同。如甲方代表人发生变更，亦不得变更合同。合同中如有未尽事宜，应由甲乙双方共同协商作出补充规定。补充条款具有与本合同同等的效力。

本合同正本一式二份，甲乙双方各执一份，合同副本一式__份，交乡政府、(如经公证或鉴证，应送公证或鉴证机关)……等单位各留存一份。

甲方：__县__乡__村__(公章)

代表人：__(盖章)

乙方：__县__乡__村__村民__(盖章)

________年____月____日订

包车运输合同模板3

甲方：

乙方：

甲乙现有货车苏 由乙方承包运输，现双方协商同意签订以下条约。

一、乙方要遵守交通法规，不闯红灯、不超速、禁止酒后驾车，不违规操作，确保车辆反光灯、反光标牌及牌照清理整洁，如有违规造成处罚后果由乙方全部承担。

二、 乙方对车辆要做到定期定点检修、定期换油，按时检审，不留任何故障隐患，维修费和油费由乙方实用实报，如有虚假十倍处罚并终止合同。

三、工作量：乙方确保厂里石灰按时运输到码头，上班和休息时间不固定，根据厂里生产情况由厂里安排，不得迟到或早退而影响厂里生产，如乙方有特殊情况需要休息，由乙方自行找驾驶员代替，费用由乙方支付。乙方承包运输固定指标为每月车，每超出一车由甲方支付乙方费用 元，多超多得。

四、 乙方完成固定运输指标，甲方支付乙方每月承包费 元，其他补助费每月 元。付款方式为每月支付元。余款合同期满全部结清。如乙方全年出色完成指标，甲方根据业绩给予乙方相应奖励并续签下年合同。

五、 本协议一式二份，双方各执一份，签字生效，未尽事宜，双方协商解决。

甲方： 乙方：

年____月____日

包车运输合同模板精选

货物出口合同（一）

编号：_______________________

签约地点：________________________________

日期：____________________________________

卖方 ：___________________________________

地址：____________________________________

电话：____________________________________

传真：____________________________________

电子邮箱 ：_______________________________

买方： ___________________________________

地址：____________________________________

电话：____________________________________

传真：____________________________________

电子邮箱 ：_______________________________

买卖双方经协商同意按下列条款成交：

1.货物名称、规格和质量 ：________________________________________

2.数量： ______________________________

3.单价及价格条款 ：______________________________

（除非另有规定，“fob”、“cfr”和“ cif”均应依照国际商会制定的《XX年国际贸易术语解释通则》（incoterms ）办理。）

4.总价：______________________________

5.允许溢短装： ______%.

6.装运期限

收到可以转船及分批装运之信用证______天内装运。

7.付款条件

买方须于_______前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后_____天在中国到期，并必 须注明允许分批装运和转船。

买方未在规定的时间内开出信用证，卖方有权发出通知取消本合同，或接受 买方对本合同未执行的全部或部份，或对因此遭受的损失提出索赔。

8.包装：________________________________________

9.保险：

按发票金额的______%投保__________险，由________负责投保。

10.品质/数量异议

如买方提出索赔，凡属品质异议须于货到目的口岸之日起30天内提出，凡属 数量异议须于货到目的口岸之日起15天内提出，对所装货物所提任何异议于保险 公司、轮船公司、其他有关运输机构或邮递机构所负责者，卖方不负任何责任。

11.由于发生人力不可抗拒的原因，致使本合约不能履行，部分或全部商品 延误交货，卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不 能克服的客观情况。

12.仲裁

因凡本合同引起的或与本合同有关的任何争议，如果协商不能解决，应提 交中国国际经济贸易仲裁委员会深圳分会。按照申请仲裁时该会当时施行的仲裁 规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。

13.通知

所有通知用______文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后______日内书面通知另一方。

14.本合同为中英文两种文本，两种文本具有同等效力。本合同一式 _____ 份。自双方签字（盖章）之日起生效。

卖方签字：________________

买方签字：________________

进口合同(样式一)

6.4 对裸装货物应以金属标签注明上述有关内容。装在甲板上的大件货物，应带有足够的货物支架或包装垫木。

6.5 每件包装箱内，应附有详细装箱单和质量合格证各一式二份，有关设备的技术文件一式二份。需要组装的设备部件附详细装配图一式二份。

6.6 卖方交付的技术资料，应具有适合于长途运输、多次搬运、防潮和防雨的包装，每包技术资料的封面上应注明下述内容：

（1）合同号：

（2）收货人；

（3）目的地；

（4）唛头标记；

（5）毛重（公斤）；

（6）箱号/件号。

每一包资料内应附有技术资料的详细清单一式二份，标明技术资料的序号、代号、名称和页数。

6.7 凡由于卖方对货物包装不善，保管不良，致使货物遭到损坏或丢失时，卖方均应按本合同第十章的规定负责修理、更换或赔偿。

第七章 设计与设计联络

7.1 为使本“合同工厂”的建设工作顺利进行，买卖双方应按照本合同附件和本章的规定进行设计和设计联络。

设计联络会议内容、时间、地点和参加人员，详见附件＿＿。

7.2 卖方承担的设计工作范围详见本合同附件＿＿。卖方提交“技术资料”的要求、内容、份数和交付日期详见本合同附件＿＿。

7.3 买方承担的设计范围详见本合同附件＿＿。买方向卖方提供的技术资料见本合同附件＿＿。卖方依此做为本“合同工厂”设计的依据。

7.4 本合同生效之日起＿＿个月内卖方应将有关的标准、规范及其清单航空邮寄给买方。买方将对卖方提交的上述标准和规范提出意见，经双方讨论商定后予以更换，并作为卖方进行设计的依据。

7.5 卖方在初步设计全部资料寄达北京后＿＿个星期内，应自费派遣技术人员来华解释设计，买方应协助办理入境签证和居留手续。在解释设计期间，买方有权提出改进意见，卖方对此应予充分考虑。初步设计经审核后双方签订协议书，该协议书即作为最终设计的依据。

7.6 买方在收到卖方提供的最终设计全部资料后＿＿天内，应予确认。

7.7 买方在本“合同工厂”设计过程中，认为有必要时，有权自费派遣技术人员到卖方的有关设计单位和制造厂了解与本“合同工厂”有关的数据和技术资料。卖方应协助办理入境证和居留手续，并免费提供所有与设计有关的技术资料和工作的方便条件。

7.8 在执行本合同期间，买方提出与“合同工厂”有关设计和技术问题时，卖方应予及时答复，并免费提供有关资料。

第八章 标准与检验

8.1 卖方供应本合同工厂的“设备”的制造、选材、检验和试验，应按卖方国家和/或公司现行标准规范进行。

本合同生效后＿＿个月内，卖方应将上述公司标准和规范一式六份和国家标准一式二份航寄买方。买方可就上述任何公司标准和规范提出意见。经双方讨论商定后予以更换并作为检验和试验的依据。

8.2 卖方对其供应的全部“设备”应进行检验和试验，并向买方提交由制造厂或卖方出具的质量合格证和检验记录，以此作为本合同规定的质量保证的证明书。“设备”检验和试验的费用均由卖方负担。

8.3 买方有权自费派遣检验人员到卖方国家会同卖方检验人员一起到制造厂车间对“设备”的制造和质量进行检验和试验。卖方应在设备进行装配和检验前三个月将检验日期通知买方，买方应在收到通知后一个月内将检验人员的名单通知卖方，以便卖方协助办理入境手续。主要设备的装配和检验应有买方人员在场，买方还应有权参加其他“设备”的检验和参加卖方及有关制造厂召开的有关“设备”的质量会议。

共17页，当前第9页1234567891011121314151617

进出口清关运输代理办理合同

委托方：编号：

贸易代理方：

运输报关代理方：

双方依照《中华人民共和国民法典》，达成协议如下：

一、委托代理项目：

代收代付货款并办理进出口清关运输并将货物送至委托方所在地

二、收付汇总金额：

预计每年约万美金

三、委托方与贸易代理方合作事项：

3.1 贸易代理方开户行：

开户行：

账号：

户名：

3.2贸易代理方服务事项：负责办理对外收付、购汇、结算和外汇核销;

3.3委托方需支付贸易代理方的费用：

3.3.1进出口货款：进口外汇金额相应的人民币金额，或者收国外收货人付的外币货款。

3.3.2进出口代理手续费：

按照每个合同进口金额相应人民币1%收取代理手续费，最低收费1000元。按照每个合同出口金额相应人民币2%收取代理手续费，最低收费20__元(包含退税服务)，如果不办理退税服务，按照每个合同出口金额相应人民币1%收取代理手续费，最低收费1000元。同一合同分批付收款的，加收300元服务费。

3.3.3. 银行财务费：按照银行实际收费计算。

四、委托方与运输报关代理方合作事项：

4.1 运输报关代理方开户行：

开户行：

账号：

户名：国际货物运输代理有限公司

4.2运输报关代理方服务事项

办理运输(如需)、投保(如需)、货物到港后，出港前负责货物清关、并将货物送至委托方指定的的地点。

4.3委托方需支付运输报关代理方的费用：

4.3.1国际运保费：货物由出口地到进口地港口或机场发生运输和货物保险费用(如果投保)(外商支付运保费的无此项)，如果货物已经运到进口地港口或机场，证明委托方已经接受以上运输报关代理方报价，并且委托运输报关代理方办理的此次运输

4.3.2进口税款：货物进口报关须缴纳的相关税款(免税商品无此项)，此款项委托方直接支付给海关/中央金库，或支付给运输报关代理方国际货物运输代理有限公司，国际货物运输代理有限公司再转交给海关/中央金库。

4.3.3 进出口杂费：

1)进出口清关费用：预计每票货物人民币1500元右。此费用直接支付给运输报关代理方：国际货物运输代理有限公司

2)其他：如国内运输、保险费等，此费用直接支付给运输报关代理方：国际货物运输代理有限公司。

五、财务结算：

1.进口业务，在国外卖方要求付款时，委托方应及时向上述第3.3.1项中的“进出口货款”(按实际的银行牌价预算)，银行财务费(预算额)及进口代理手续费，支付到代理方指定账户。代理方完成对外付款工作后及时向委托方开具进口结算发票(美元汇率为结算当日银行牌价汇率)并交付委托方。

2.出口业务，国外买方付款代理方后，代理方应及时向上述第五项中的“进出口货款”(按实际的银行牌价预算)，支付到委托方指定账户。并处理退税相关事宜。

3.在货物进口到达北京机场或其他口岸海关之前，委托方应按代理方的付款指示将国际运保费(预算额)，进口税款(预算额)，进口杂费(预算额)及时支付到上述代理方指定的账户，以便代理方及时办理进口清关事宜。

4.代理方将上述第3.2条和第4.2条规定的代理事项全部处理完毕后，根据进口项目发生的实际税、费向委托方提供相应的凭证，并与委托方做财务结算。

六、责任划分：

1.鉴于代理方与委托方之间系委托合同关系，外贸合同(由委托方、代理方和国外卖/买方三方签署)对国外卖/买方和委托方均有约束力。在外贸合同的执行过程中，如发生争议和纠纷，代理方应协助委托方和国外卖/买方商议解决，如不能达成一致，可通过仲裁或诉讼方式解决，但代理方对于货物质量等超出本委托代理项目外的服务和问题，不承担任何责任!

2.代理方在完成其代理事宜过程中，需要由委托方提供的材料及文件，委托方应及时向代理方提供并保证提供材料的真实和有效性。若委托方未能及时按照上述第六项的规定向代理方支付相应款项或未能向代理方提供真实有效的材料和文件而造成的额外费用(如清关不及时的罚款或其他滞纳金等)或其他法律责任，由委托方自身承担。若因代理方自身原因造成的额外费用、损失或其他连带法律责任，由代理方自身承担。

3.在本协议的有效期内，未经委托方书面同意，代理方应：

(1)除委托事项外，不得为委托方代理其他事项或以委托方名义允诺或解决其他事项;

(2)对委托方提供的资料文件等所有信息应采取合理适当的保密措施，未经委托方书面许可不得作代理事项之外的用途。

七、效力：

本协议的任何修改或中止或解除，均须经三方同意并签署书面意见，方为有效。凡因履行本协议发生的一切争议，三方应通过友好协商解决，如协商不成，则向代理方所在地法院提请诉讼，代理方所在地得法院享有排他性的管辖权。诉讼费用及律师费用由败诉一方承担

1.本协议有效期为双方签字盖章之日起一年，到期如三方均未提出异议，本协议可自动延期一年，或三方以本协议为范本签订新的委托代理协议。

八、本协议一式三份，三方各保留一份，自三方授权代表签字、盖章之日起生效。

委托方(盖章)贸易代理方(盖章)

代表：(签字)代表：(签字)

地址：地址：

传真：传真：

电话：电话：

签字日期：年月日签字日期：年月日

运输报关代理方(盖章)

代表：(签字)

地址：

传真：

电话：

签字日期：年月日

签约地点：________________________________

日期：____________________________________

卖方：___________________________________

地址：____________________________________

电话：____________________________________

传真：____________________________________

电子邮箱：_______________________________

买方：___________________________________

地址：____________________________________

电话：____________________________________

传真：____________________________________

电子邮箱：_______________________________

买卖双方经协商同意按下列条款成交：

1.货物名称、规格和质量：________________________________________

2.数量：______________________________

3.单价及价格条款：______________________________

（除非另有规定，“fob”、“cfr”和“cif”均应依照国际商会制定的《20__年国际贸易术语解释通则》（incoterms20__）办理。）

4.总价：______________________________

5.允许溢短装：______%.

6.装运期限

收到可以转船及分批装运之信用证______天内装运。

7.付款条件

买方须于_______前将保兑的

出口销售合同范文

编 号(No.) ：_____________

签约地点(Signed at) ：________

日 期(Date) ：_____________

卖方(Seller) ：________________________

地址(Address) ：_______________________

电话(Tel) ：__________传真(Fax) ：__________

电子邮箱(E-mail) ：_____________________

买方(Buyer) ： ______________________

地址(Address) ： ______________________

电话(Tel) ：：_________传真(Fax) ：_____________

电子邮箱(E-mail) ： ______________________

买卖双方经协商同意按下列条款成交：

The undersigned Seller and Buyer have agreed to close the following transactions according to the terms and conditions set forth as below：

1. 货物名称、规格和质量 (Name， Specifications and Quality of Commodity)：

2. 数量(Quantity)：

3. 单价及价格条款 (Unit Price and Terms of Delivery) ：

(除非另有规定，“FOB”、“CFR”和“ CIF”均应依照国际商会制定的《20xx年国际贸易术语解释通则》(INCOTERMS 20xx)办理，

出口销售合同。) The terms FOB，CFR，or CIF shall be subject to the International Rules for the Interpretation of Trade Terms (INCOTERMS 20xx) provided by International Chamber of Commerce (ICC) unless otherwise stipulated herein.)

4. 总价 (Total Amount)：

5. 允许溢短装(More or Less)： ___%.

6. 装运期限(Time of Shipment)：

收到可以转船及分批装运之信用证___天内装运。

Within _____ days after receipt of L/C allowing transhipment and partial shipment.

7. 付款条件(Terms of Payment)：

买方须于____ 前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后_____天在中国到期，并必 须注明允许分批装运和转船。

By Confirmed， Irrevocable， Transferable and Divisible L/C to be available by sight draft to reach the Seller before ______ and to remain valid for negotiation in China until ______after the Time of Shipment. The L/C must specify that transshipment and partial shipments are allowed.

买方未在规定的时间内开出信用证，卖方有权发出通知取消本合同，或接受 买方对本合同未执行的全部或部份，或对因此遭受的损失提出索赔。

The Buyer shall establish a Letter of Credit before the above-stipulated time， failing which， the Seller shall have the right to rescind this Contract upon the arrival of the notice at Buyer or to accept whole or part of this Contract non fulfilled by the Buyer， or to lodge a claim for the direct losses sustained， if any.

8. 包装(Packing)：

9. 保险(Insurance)：

按发票金额的___%投保_____险，由____负责投保。

Covering _____ Risks for______110% of Invoice Value to be effected by the ____________.

10. 品质/数量异议 (Quality/Quantity discrepancy)：

如买方提出索赔，凡属品质异议须于货到目的口岸之日起30天内提出，凡属 数量异议须于货到目的口岸之日起15天内提出，对所装货物所提任何异议于保险 公司、轮船公司、其他有关运输机构或邮递机构所负责者，卖方不负任何责任，

In case of quality discrepancy， claim should be filed by the Buyer within 30 days after the arrival of the goods at port of destination， while for quantity discrepancy， claim should be filed by the Buyer within 15 days after the arrival of the goods at port of destination. It is understood that the Seller shall not be liable for any discrepancy of the goods shipped due to causes for which the Insurance Company， Shipping Company， other Transportation Organization /or Post Office are liable.

11. 由于发生人力不可抗拒的原因，致使本合约不能履行，部分或全部商品 延误交货，卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不 能克服的客观情况。

The Seller shall not be held responsible for failure or delay in delivery of the entire lot or a portion of the goods under this Sales Contract in consequence of any Force Majeure incidents which might occur. Force Majeure as referred to in this contract means unforeseeable， unavoidable and insurmountable objective conditions.

12. 仲裁(Arbitration)：

因凡本合同引起的或与本合同有关的任何争议，如果协商不能解决，应提 交中国国际经济贸易仲裁委员会深圳分会。按照申请仲裁时该会当时施行的仲裁 规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。

Any dispute arising from or in connection with the Sales Contract shall be settled through friendly negotiation. In case no settlement can be reached， the dispute shall then be submitted to China International Economic and Trade Arbitration Commission (CIETAC) ，Shenzhe Commission for arbitration in accordance with its rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties.

13. 通知(Notices)：

所有通知用___文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后___日内书面通知另一方。

All notice shall be written in _____ and served to both parties by fax/e-mail /courier according to the following addresses. If any changes of the addresses occur， one party shall inform the other party of the change of address within ____ days after the change.

14. 本合同为中英文两种文本，两种文本具有同等效力。本合同一式 _____ 份。自双方签字(盖章)之日起生效。

This Contract is executed in two counterparts each in Chinese and English， each of which shall be deemed equally authentic. This Contract is in _____ copies effective since being signed/sealed by both parties.

The Seller： The Buyer：

卖方签字： 买方签字：

进口合同范本【英文版】

在进口合同中，大多数是使用F.O.B.价格条件成交，只有少数零星进口商品使用C.I.F.条件，支付条件绝大多数是使用信用证方式。进口合同格式一般由我方备制，一式二份，经我方签章后，递交对方签回一份，留档备查。

进口合同范本【英文版】

买方：__________________________

The Buyer:________________________

地址： __________________________

Address: _________________________

电话(Tel):___________ 传真(Fax):__________

电子邮箱(E-mail):______________________

卖方：___________________________

The Seller:_________________________

地址：___________________________

Address: __________________________

电话(Tel):_________ 传真(Fax):___________

电子邮箱(E-mail):______________________

买卖双方同意按照下列条款签订本合同：

The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below:

1. 货物名称、规格和质量(Name, Specifications and Quality of Commodity)：

2. 数量(Quantity)：

允许____的溢短装(___% more or less allowed)

3. 单价(Unit Price)：

4. 总值(Total Amount)：

5. 交货条件(Terms of Delivery) FOB/CFR/CIF_______

6. 原产地国与制造商 (Country of Origin and Manufacturers):

7. 包装及标准(Packing)：

货物应具有防潮、防锈蚀、防震并适合于远洋运输的包装，由于货物包装不良而造成的货物残损、灭失应由卖方负责。卖方应在每个包装箱上用不褪色的颜色标明尺码、包装箱号码、毛重、净重及“此端向上”、“防潮”、“小心轻放”等标记。

The packing of the goods shall be preventive from dampness, rust, moisture, erosion and shock, and shall be suitable for ocean transportation/ multiple transportation. The Seller shall be liable for any damage and loss of the goods attributable to the inadequate or improper packing. The measurement, gross weight, net weight and the cautions such as "Do not stack up side down", "Keep away from moisture", "Handle with care" shall be stenciled on the surface of each package with fadeless pigment.

8. 唛头(Shipping Marks)：

9. 装运期限(Time of Shipment)：

10. 装运口岸(Port of Loading)：

11. 目的口岸(Port of Destination)：

12. 保险(Insurance)：

由____按发票金额110%投保_____险和_____附加险。

Insurance shall be covered by the ________ for 110% of the invoice value against _______ Risks and __________ Additional Risks.

13. 付款条件(Terms of Payment)：

(1) 信用证方式：买方应在装运期前/合同生效后__日，开出以卖方为受益人的不可撤销的议付信用证，信用证在装船完毕后__日内到期。

Letter of Credit: The Buyer shall, ______ days prior to the time of shipment /after this Contract comes into effect, open an irrevocable Letter of Credit in favor of the Seller. The Letter of Credit shall expire ____ days after the completion of loading of the shipment as stipulated.

(2) 付款交单：货物发运后，卖方出具以买方为付款人的付款跟单汇票，按即期付款交单(D/P)方式，通过卖方银行及_____银行向买方转交单证，换取货物。

Documents against payment: After shipment, the Seller shall draw a sight bill of exchange on the Buyer and deliver the documents through Sellers bank and ______ Bank to the Buyer against payment, i.e D/P. The Buyer shall effect the payment immediately upon the first presentation of the bill(s) of exchange.

(3) 承兑交单：货物发运后，卖方出具以买方为付款人的付款跟单汇票，付款期限为____后__日，按即期承兑交单(D/A__日)方式，通过卖方银行及______银行，经买方承兑后，向买方转交单证，买方在汇票期限到期时支付货款。

Documents against Acceptance: After shipment, the Seller shall draw a sight bill of exchange, payable_____ days after the Buyers delivers the document through Seller’s bank and _________Bank to the Buyer against acceptance (D/A ___ days). The Buyer shall make the payment on date of the bill of exchange.

(4) 货到付款：买方在收到货物后__天内将全部货款支付卖方(不适用于FOB、CRF、CIF术语)。

Cash on delivery (COD): The Buyer shall pay to the Seller total amount within ______ days after the receipt of the goods (This clause is not applied to the Terms of FOB, CFR, CIF).

14. 单据(Documents Required)：

卖方应将下列单据提交银行议付/托收：

The Seller shall present the following documents required to the bank for negotiation/collection:

(1) 标明通知收货人/受货代理人的全套清洁的、已装船的、空白抬头、空白背书并注明运费已付/到付的海运/联运/陆运提单。

Full set of clean on board Ocean/Combined Transportation/Land Bills of Lading and blank endorsed marked freight prepaid/ to collect;

(2) 标有合同编号、信用证号(信用证支付条件下)及装运唛头的商业发票一式__份;

Signed commercial invoice in ______copies indicating Contract No., L/C No. (Terms of L/C) and shipping marks;

(3) 由______出具的装箱或重量单一式__份;

Packing list/weight memo in ______ copies issued by__;

(4) 由______出具的质量证明书一式__份;

Certificate of Quality in _______ copies issued by____;

(5) 由______出具的数量证明书一式__份;

Certificate of Quantity in ___ copies issued by____;

(6) 保险单正本一式__份(CIF 交货条件);

Insurance policy/certificate in ___ copies (Terms of CIF);

(7)____签发的产地证一式__份;

Certificate of Origin in ___ copies issued by____;

(8) 装运通知(Shipping advice): 卖方应在交运后_____小时内以特快专递方式邮寄给买方上述第__项单据副本一式一套。

The Seller shall, within ____ hours after shipment effected, send by courier each copy of the above-mentioned documents No. __.

15. 装运条款(Terms of Shipment)：

(1) FOB交货方式

卖方应在合同规定的装运日期前30天，以____方式通知买方合同号、品名、数量、金额、包装件、毛重、尺码及装运港可装日期，以便买方安排租船/订舱。装运船只按期到达装运港后，如卖方不能按时装船，发生的空船费或滞期费由卖方负担。在货物越过船弦并脱离吊钩以前一切费用和风险由卖方负担。

The Seller shall, 30 days before the shipment date specified in the Contract, advise the Buyer by _______ of the Contract No., commodity, quantity, amount, packages, gross weight, measurement, and the date of shipment in order that the Buyer can charter a vessel/book shipping space. In the event of the Sellers failure to effect loading when the vessel arrives duly at the loading port, all expenses including dead freight and/or demurrage charges thus incurred shall be for the Sellers account.

(2) CIF或CFR交货方式

卖方须按时在装运期限内将货物由装运港装船至目的港。在CFR术语下，卖方应在装船前2天以____方式通知买方合同号、品名、发票价值及开船日期，以便买方安排保险。

The Seller shall ship the goods duly within the shipping duration from the port of loading to the port of destination. Under CFR terms, the Seller shall advise the Buyer by _________ of the Contract No., commodity, invoice value and the date of dispatch two days before the shipment for the Buyer to arrange insurance in time.

16. 装运通知(Shipping Advice)：

一俟装载完毕，卖方应在__小时内以____方式通知买方合同编号、品名、已发运数量、发票总金额、毛重、船名/车/机号及启程日期等。

The Seller shall, immediately upon the completion of the loading of the goods, advise the Buyer of the Contract No., names of commodity, loading quantity, invoice values, gross weight, name of vessel and shipment date by _________ within ________hours.

17. 质量保证(Quality Guarantee)：

货物品质规格必须符合本合同及质量保证书之规定，品质保证期为货到目的港__个月内。在保证期限内，因制造厂商在设计制造过程中的缺陷造成的货物损害应由卖方负责赔偿。

The Seller shall guarantee that the commodity must be in conformity with the quatity, specifications and quantity specified in this Contract and Letter of Quality Guarantee. The guarantee period shall be ______ months after the arrival of the goods at the port of destination, and during the period the Seller shall be responsible for the damage due to the defects in designing and manufacturing of the manufacturer.

18. 检验(Inspection) (以下两项任选一项)：

(1)卖方须在装运前__日委托______检验机构对本合同之货物进行检验并出具检验证书，货到目的港后，由买方委托________检验机构进行检验。

The Seller shall have the goods inspected by ______ days before the shipment and have the Inspection Certificate issued by____. The Buyer may have the goods reinspected by ________ after the goods誥rrival at the destination.

(2) 发货前，制造厂应对货物的质量、规格、性能和数量/重量作精密全面的检验，出具检验证明书，并说明检验的技术数据和结论。货到目的港后，买方将申请中国商品检验局(以下简称商检局)对货物的规格和数量/重量进行检验，如发现货物残损或规格、数量与合同规定不符，除保险公司或轮船公司的责任外，买方得在货物到达目的港后__日内凭商检局出具的检验证书向卖方索赔或拒收该货。在保证期内，如货物由于设计或制造上的缺陷而发生损坏或品质和性能与合同规定不符时，买方将委托中国商检局进行检验。

The manufacturers shall, before delivery, make a precise and comprehensive inspection of the goods with regard to its quality, specifications, performance and quantity/weight, and issue inspection certificates certifying the technical data and conclusion of the inspection. After arrival of the goods at the port of destination, the Buyer shall apply to China Commodity Inspection Bureau (hereinafter referred to as CCIB) for a further inspection as to the specifications and quantity/weight of the goods. If damages of the goods are found, or the specifications and/or quantity are not in conformity with the stipulations in this Contract, except when the responsibilities lies with Insurance Company or Shipping Company, the Buyer shall, within _____ days after arrival of the goods at the port of destination, claim against the Seller, or reject the goods according to the inspection certificate issued by CCIB. In case of damage of the goods incurred due to the design or manufacture defects and/or in case the quality and performance are not in conformity with the Contract, the Buyer shall, during the guarantee period, request CCIB to make a survey.

19. 索赔(Claim)：

买方凭其委托的检验机构出具的检验证明书向卖方提出索赔(包括换货)，由此引起的全部费用应由卖方负担。若卖方收到上述索赔后______天未予答复，则认为卖方已接受买方索赔。

The buyer shall make a claim against the Seller (including replacement of the goods) by the further inspection certificate and all the expenses incurred therefrom shall be borne by the Seller. The claims mentioned above shall be regarded as being accepted if the Seller fail to reply within ______days after the Seller received the Buyers claim.

20. 迟交货与罚款(Late delivery and Penalty):

除合同第21条不可抗力原因外，如卖方不能按合同规定的时间交货，买方应同意在卖方支付罚款的条件下延期交货。罚款可由议付银行在议付货款时扣除，罚款率按每__天收__%，不足__天时以__天计算。但罚款不得超过迟交货物总价的____%。如卖方延期交货超过合同规定__天时，买方有权撤销合同，此时，卖方仍应不迟延地按上述规定向买方支付罚款。

买方有权对因此遭受的其它损失向卖方提出索赔。

Should the Seller fail to make delivery on time as stipulated in the Contract, with the exception of Force Majeure causes specified in Clause 21 of this Contract, the Buyer shall agree to postpone the delivery on the condition that the Seller agree to pay a penalty which shall be deducted by the paying bank from the payment under negotiation. The rate of penalty is charged at______% for every ______ days, odd days less than _____days should be counted as ______ days. But the penalty, however, shall not exceed_______% of the total value of the goods involved in the delayed delivery. In case the Seller fail to make delivery ______ days later than the time of shipment stipulated in the Contract, the Buyer shall have the right to cancel the Contract and the Seller, in spite of the cancellation, shall nevertheless pay the aforesaid penalty to the Buyer without delay.

The buyer shall have the right to lodge a claim against the Seller for the losses sustained if any.

21. 不可抗力(Force Majeure)：

凡在制造或装船运输过程中，因不可抗力致使卖方不能或推迟交货时，卖方不负责任。在发生上述情况时，卖方应立即通知买方，并在__天内，给买方特快专递一份由当地民间商会签发的事故证明书。在此情况下，卖方仍有责任采取一切必要措施加快交货。如事故延续__天以上，买方有权撤销合同。

The Seller shall not be responsible for the delay of shipment or non-delivery of the goods due to Force Majeure, which might occur during the process of manufacturing or in the course of loading or transit. The Seller shall advise the Buyer immediately of the occurrence mentioned above and within_____ days thereafter the Seller shall send a notice by courier to the Buyer for their acceptance of a certificate of the accident issued by the local chamber of commerce under whose jurisdiction the accident occurs as evidence thereof. Under such circumstances the Seller, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. In case the accident lasts for more than _____ days the Buyer shall have the right to cancel the Contract.

22. 争议的解决 (Arbitration):

凡因本合同引起的或与本合同有关的任何争议应协商解决。若协商不成，应提交中国国际经济贸易仲裁委员会深圳分会，按照申请仲裁时该会现行有效的仲裁规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。

Any dispute arising from or in connection with the Contract shall be settled through friendly negotiation. In case no settlement is reached, the dispute shall be submitted to China International Economic and Trade Arbitration Commission (CIETAC),Shenzhen Commission for arbitration in accordance with its rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties.

23. 通知(Notices):

所有通知用____文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后__日内书面通知另一方。

All notice shall be written in _____ and served to both parties by fax/courier according to the following addresses. If any changes of the addresses occur, one party shall inform the other party of the change of address within ____days after the change.

24. 本合同使用的FOB、CFR、CIF术语系根据国际商会《2019年国际贸易 术语解释通则》。

The terms FOB、CFR、CIF in the Contract are based on INCOTERMS 2019 of the International Chamber of Commerce.

25. 附加条款 (Additional clause)：

本合同上述条款与本附加条款抵触时，以本附加条款为准。

Conflicts between Contract clause hereabove and this additional clause, if any, it is subject to this additional clause.

26. 本合同用中英文两种文字写成，两种文字具有同等效力。本合同共__ 份，自双方代表签字(盖章)之日起生效。

This Contract is executed in two counterparts each in Chinese and English, each of which shall deemed equally authentic. This Contract is in ______ copies, effective since being signed/sealed by both parties.

Representative of the Buyer

(Authorized signature):

卖方代表(签字)：

Representative of the Seller

我单位现 (A逐票、B长期)委托贵公司代理 等通关事宜。（A、报关查验B、垫缴税款C、办理海关证明联D、审批手册E、核销手册F、申办减免税手续G、其他 ）详见《委托报关协议》。

我单位保证遵守《海关法》和国家有关法规，保证所提供的情况真实、完整、单货相符。否则，愿承担相关法律责任。

本委托书有效期自签字之日起至 年 月 日止。

委托方（盖章）：

法定代表人或其授权签署《代理报关委托书》的人（签字）

年 月 日

委 托 报 关 协 议

为明确委托报关具体事项和各自责任，双方经平等协商签定协议如下：

委托方

被委托方

主要货物名称

*报关单编码

No.

HS编码

□□□□□□□□□□

收到单证日期

年 月 日

进出口日期

年 月 日

收到单证情况

合同□

发票□

提单号

装箱清单□

提（运）单□

贸易方式

加工贸易手册□

许可证件□

原产地/货源地

其他

传真电话

报关收费

人民币： 元

其他要求：

承诺说明：

背面所列通用条款是本协议不可分割的一部分，对本协议的签署构成了对背面通用条款的同意。

背面所列通用条款是本协议不可分割的一部分，对本协议的签署构成了对背面通用条款的同意。

委托方业务签章：

经办人签章：

联系电话： 年 月 日

被委托方业务签章：

经办报关员签章：

联系电话： 年 月 日

（白联：海关留存、黄联：被委托方留存、红联：委托方留存） 中国报关协会监制

委托报关协议通用条款

委托方责任 委托方应及时提供报关报检所须的全部单证，并对单证的真实性、准确性和完整性负责。

委托方负责在报关企业办结海关手续后，及时、履约支付代理报关费用，支付垫支费用，以及因委托方责任产生的滞报金、滞纳金和海关等执法单位依法处以的各种罚款。

负责按照海关要求将货物运抵指定场所。

负责与被委托方报关员一同协助海关进行查验，回答海关的询问，配合相关调查，并承担产生的相关费用。

在被委托方无法做到报关前提取货样的情况下，承担单货相符的责任。

被委托方责任

负责解答委托方有关向海关申报的疑问。

负责对委托方提供的货物情况和单证的真实性、完整性进行“合理审查”，审查内容包括：（一）证明进出口货物实际情况的资料，包括进出口货物的品名、规格、用途、产地、贸易方式等；（二）有关进出口货物的合同、发票、运输单据、装箱单等商业单据；（三）进出口所需的许可证件及随附单证；（四）海关要求的加工贸易（纸质或电子数据的）及其其他进出口单证。

因确定货物的品名、归类等原因，经海关批准，可以看货或提取货样。

在接到委托方交付齐备的随附单证后，负责依据委托方提供的单证，按照《中华人民共和国海关进出口报关单填制规范》认真填制报关单，承担“单单相符”的责任，在海关规定和本委托报关协议中约定的时间内报关，办理海关手续。

负责及时通知委托方共同协助海关进行查验，并配合海关开展相关调查。

负责支付因报关企业的责任给委托方造成的直接经济损失，所产生的滞报金、滞纳金和海关等执法单位依法处以的各种罚款。

负责在本委托书约定的时间内将办结海关手续的有关委托内容的单证、文件交还委托方或其指定的人员（详见《委托报关协议》“其他要求”栏）。

赔偿原则 被委托方不承担因不可抗力给委托方造成损失的责任。因其他过失造成的损失，由双方自行约定或按国家有关法律法规的规定办理。由此造成的风险，委托方可以投保方式自行规避。

不承担的责任 签约双方各自不承担因另外一方原因造成的直接经济损失，以及滞报金、滞纳金和相关罚款。

收费原则 一般货物报关收费原则上按当地《报关行业收费指导价格》规定执行。特殊商品可由双方另行商定。

法律强制 本《委托报关协议》的任一条款与《海关法》及有关法律、法规不一致时，应以法律、法规为准。但不影响《委托报关协议》其他条款的有效。

协商解决事项 变更、中止本协议或双方发生争议时，按照《民法典》有关规定及程序处理。因签约双方以外的原因产生的问题或报关业务需要修改协议条款，应协商订立补充协议。

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)