0

技术指导属于哪个部门最新20篇

浏览

3480

范文

1000

技术转让和合作生产合同_合同范本

范文类型:合同协议,适用行业岗位:技术,生产,全文共 5005 字

+ 加入清单

技术转让合作生产合同

以中华人民共和国总公司和厂为一方(以下简称甲方)以公司为另一方(以下简称乙方)双方通过友好协商于年月日在北京签订技术转让及合作生产合同,合同条件如下第一章定义1.“合同产品”系指本合同附件1所规定的立式弯板机。2.“考核产品”:系指根据乙方提供的技术资料,并按附件5规定进行考核验收的由甲方制造的第一台合同产品。第二章合同内容及范围1.由乙方向甲方转让合同产品的设计、制造、销售、安装和维修使用的技术,合同产品的规格和技术参数详见本合同附件1。2.乙方负责向甲方提供合同产品全部有关技术和技术资料(以下简称资料),其具体内容和交付时间详见本合同附件2及附件3。3.乙方授与甲方在中国制造和销售合同产品的权利。前四台合同产品只在中国国内销售。在此以后甲方制造的合同产品可销往下列国家:,如合同产品按政府间经济贸易协议规定销往其他国家或由中国承包商在中国购买,随承包工程出口,则不受上述规定的限制。4.在合同期间,如甲方需要,乙方有义务以优惠价格向甲方提供制造合同产品所需的部件及原材料,双方将通过协商另签合同。第一台及其后诸台合同产品的分工详见附件1。5.乙方负责图纸及资料的转化并在乙方工厂及其有关协作工厂培训甲方人员。乙方应尽最大努力使甲方人员掌握合同产品的技术(具体内容见本合同附件3)。6.乙方有义务派遣技术人员到甲方工厂进行技术服务(详见本合同附件4)。7.乙方同意向甲方提供所需的专用工具、夹具及设备和检测合同产品所需的技术资料(详见本合同附件2)。8.在合同有效期内,乙方同意甲方有权在其合同产品上标注甲乙双方联合商标或“按公司许可证制造”字样。第三章价格1.鉴于乙方按本合同第二章1、2、3、4、5、6、7、8所尽的义务,甲方同意向乙方支付英镑的入门费(大写英镑)。2.合同期内,如甲方要求乙方提供其他规格产品的全部资料,则甲方应为每一规格的资料向乙方支付英镑(大写英镑)。乙方应向中方交付所得税。3.甲方应就每台出售的合同产品向乙方支付提成费,前五年为合同产品净销售价的8%,后五年为合同产品净销售价的6%。乙方应向中方交付所得税。净销售价:销售价扣除运费、税费、包装费、储存费、保险费、安装费,并减去向乙方购买零部件的费用(包括运费、关税等)。第四章支付条件1.甲方向乙方支付的本合同费用均以英镑信汇(m/t)支付。(如需电汇,电汇费用由乙方负担)。甲方通过北京中国银行和英国银行支付。所有在中国发生的银行费用由甲方负担,在中国以外发生的银行费用由乙方负担。2.本合同第三章1所规定的入门费按下述办法和比例由甲方向乙方支付:(1)入门费的10%(百分之壹拾),计英镑(大写英镑)于甲方收到乙方下列正确无误的单据之日起,不迟于30天向乙方支付:①英国政府有关~出具的有效出口许可证影印本一份,或同样的有关~出具的不需要出口许可证的证明文件一份。②金额为入门费总数的形式发票一式四份。③即期汇票正副本各一份。④由英国银行出具的,以甲方为受益人的,金额为英镑(大写英镑)的不可撤销的保证函正副本各一份(保证函格式见本合同附件6)。(2)入门费20%(面分之贰拾)计英镑(大写英镑)于乙方发出本合同附件3第3.2.1条所规定的临时资料3个月后,并于甲方收到乙方下列正确无误的单据之日起,不迟于30天向乙方支付:①四份商业发票②即期汇票正、副本各一份③两份资料空运提单及附件2及附件3第3.2.1条规定的临时资料交付已毕的证书的影印件。(3)入门费40%(百分之肆拾)计英镑(大写英镑)于甲方收到附件3第3、6条所规定的资料起,如乙方提供下列正确无误的文件,则不迟于30天,向乙方支付:①四份商业发票②即期汇票正、副本各一份③两份资料空运提单及附件3、6条规定的资料交付已毕的证书的影印件。(4)入门费15%(百分之壹拾伍)计英镑(大写英镑)于附件3第3.8.2条规定的甲方培训人员按本合同附件3接受培训完毕之后,从收到乙方下列正确无误的文件之日起,不迟于30天,向乙方支付:①四份商业发票②即期汇票正、副本各一份。③两份由甲、乙双方签署的关于附件3第3.8.2条规定的甲方培训人员已按本合同之规定接受培训完毕的证书的影印件。(5)入门费15%(百分之壹拾伍)计:英镑(大写英镑)于甲方收到乙方下列正确无误的文件之日起,不迟于30天,向乙方支付:①四份商业发票②即期汇票正、副本各一份③两份由甲乙双方签署的第一台合同产品在甲方工厂考核检验后的质量性能试验合格证书的影印件。如果不是因为乙方的失误,即使届时没能签署第一台合同产品的质量性能试验合格证书,从甲方收到乙方提供的第一台合同产品的硬件后,不晚于24个日,甲方应向乙方支付该款。3.执行了本合同第7章第2条的内容并在甲方售出合同产品之后,甲方应按下列条款开始向乙方支付提成费。(1)甲方应从每年的12月31日起,15天之内,通知乙方过去的一年里的总销售量。(2)从甲方收到乙方下列正确无误的文件之日起30天之内,由甲方向乙方支付提成费:①四份相应的该期内提成费金额的计算资料②四份商业发票③两份即期汇票第五章文件交付1.乙方应按本合同附件2规定的交付时间及本合同附件2和附件3所规定的内容将资料交付到北京机常2.北京机场空运单的印戳日期为资料的实际交付日期,甲方应将盖有到达印戳日期的空运提单影印各一份分别寄给乙方和北京中国银行。3.每批资料发运后24小时内,乙方应将合同号、空运提单号、空运提单各日期、资料名称、件数、重量、班机号和预计抵达北京日期用电报或电传通知甲方,同时将空运提单和技术资料详细清单一式两份寄给甲方。4.如果技术资料短缺或空运中丢失,损坏,乙方应在收到甲方书面通知后的45天内,再次免费补寄给甲方。5.交付资料应具有适合长途运输、多次搬运、防雨和防潮的坚固包装。6.每包技术资料的包装封面上,应用英文标明下述内容:(1)合同号;(2)收货人;公司(3)目的地;(4)唛头;(5)重量(公斤);(6)箱号/件号;(7)收货人代号;(8)离岸港口。7.包装箱内应有详细的技术资料清单一

式两份,标有技术资料的内容、名称及数量。第六章技术资料的修改及改进1.乙方提供的技术资料如不适合甲方的实际生产条件(如设计标准、材料、工艺装备等),乙方有责任帮助甲方修改技术资料并在培训和技术服务期间予以确认。2.在合同有效期内和合同规定的范围内,任一方对合同产品所作的任何改进与发展,都应免费提供给对方。第七章考核和验收1.为了验证乙方技术资料的正确性和可靠性,合同产品考核试验应有乙方技术人员参加,双方人员在甲方工厂共同进行。考核方法见合同附件5。2.经考核,如合同产品的性能符合本合同附件5规定,即通过验收,双方联合签署合同产品的考核证书一式四份,每方各持两份。3.经考核,如合同产品的技术性能达不到合同规定的技术性能,双方应通过友好协商,共同研究分析原因,在采取措施消除缺陷后,进行第二次性能考核。合格后,按本章第2条规定,双方签署考核证书。4.如第一次考核不合格系乙方的责任,则参加第二次考核的乙方技术人员的费用及更换和修复缺陷件的费用由乙方承担。如系甲方责任,上述费用由甲方承担。5.如经过第二次考核仍不能验收合格且又系乙方责任,乙方应采取有效措施,消除缺陷,进行第三次试验,费用由乙方承担。6.经过三次考核不合格,如系乙方责任,则甲方有权终止合同,并按第8章第6条处理。如系甲方责任,则双方应在考核证书上签字,但乙方仍有义务帮助甲方考核成功。第八章保证及索赔1.乙方保证所提供的技术资料是乙方使用的最新技术资料,并在合同有效期内向甲方提供有关合同产品的任何改进和发展的技术资料。2.乙方保证(根据附件2)所提供的技术资料是完整的、正确的、清晰的,并保证及时交付。3.如果乙提供的技术资料不符合本章第2条的规定,乙方必须在收到甲方书面通知后45天内,免费将所缺的技术资料或正确、清晰的技术资料寄给甲方。4.如乙方因第12章第1条以外的原因未能在本合同规定的时期内交付附件2所指的技术资料,甲方应书面通知乙方。如乙方在一周之内仍未能交付资料,则应向甲方支付违约罚金,每拖延一周支付第三章第1条价格的0.25%违约罚金的总额不得超过第三章第1条价格的5%。5.乙方向甲方支付第8章第4条规定的违约罚金不能免除乙方向甲方继续交付技术资料的责任。6.按第7章规定,由于乙方的责任,产品考核三次不合格时,则按以下办法处理:①若产品不合格以致甲方不能投产,甲方提出终止合同时,乙方必须将甲方已经支付的钱部金额,并加以年利×%(百分之)的利息,一并退还甲方。②若产品不合格只有部分性能指标达不到合同的规定,甲方仍可投产的,乙方应按以下规定赔款:(略)。第九章侵权和保密1.乙方保证它是本合同规定提供的技术的合法所有者,并有权向甲方转让。如果发生第三方指控侵权,乙方应负责与第三方交涉并承担由此产生的一切法律和经济责任。2.甲方同意对乙方提供的技术予以保密。如果上述技术内容之部分或全部被乙方或第三方公布,而且甲方获得了已公布的证据,则甲方不再承担保密义务。3.合同终止后,甲方仍有权使用乙方提供的技术,即甲方有权继续设计、制造使用、销售和出口合同产品。第十章税收1.凡因履行本合同而发生在甲方国家以外的一切税费,均由乙方承担。2.中国政府根据《中华人民共和国外国企业所得税法》和《中华人民共和国个人所得税法》对乙方课征有关执行本合同的一切税费,由乙方支付。上述所得税将由甲方从本合同规定的支付中予以扣除,并代乙方向税务~缴纳,甲方应向乙方提供税务~出具的税收单据一份。3.中国政府根据现行税法对甲方课征有关履行本合同的各项税费,由甲方支付。第十一章仲裁1.因执行本合同所发生的或与本合同有关的一切争议,双方应通过友好协商解决。如协商仍不能达成协议时,则应提交仲裁解决。2.钟裁地点在瑞典的斯德哥尔摩,按斯德哥尔摩商会仲裁院仲裁程序进行仲裁。3.仲裁裁决是终局裁决,对双方均有约束力。4.仲裁费用由败诉方承担。5.除了在仲裁过程中进行仲裁的部分外,合同应继续执行。第十二章不可抗力1.签约双方中的任何一方,由于战争、严重水灾、火灾、台风、地震和其他双方同意的不可抗力事故而影响合同执行时,则延长履行合同的期限,应相当于事故所影响的时间。2.责任方应尽快将发生不可抗力事故的情况用电传或电报通知双方,并于14天内以航空挂号信将有关~出具的证明文件提交给另一方确认。3.如不可抗力事故的延续时间超过120天时,双方应通过友好协商尽快解决继续执行合同的问题。第十三章合同生效终止及其他1.本合同由双方代表于年月日签订。合同签字后,各方应分别向本国政府~申请批准。以最后一方的批准日期为本合同生效日期。双方应尽最大努力在60天内获得批准,用电传通知对方并用信件确认。如从签订合同之日起,6个月内合同未能生效,则本合同对甲、乙双方均无约束力。2.从合同生效日算起,本合同有效期为10年。3.本合同的任何终止,不影响双方发生的债权和债务,债务人应继续偿付未了债务,直至偿清债权人的全部债务为止。4.本合同用中、英文写成,一式四份,每种文字双方各执两份。5.本合同附件1至附件7为本合同不可分割的组成部分,与合同正文有同等效力。6.对本合同条款的任何修改及补充,需由双方代表签署书面文件,此文件作为本合同不可分割的组成部分,与合同有同等效力。7.为执行合同而发生的双方间的通讯均用英文进行。正式通知以挂号信航寄,一式四份。第十四章法定地址甲方:公司地址:电传:电话:乙方:公司地址:电传:电话:甲方代表乙方代表附件1合同产品的技术规范和合作生产的分工1.1甲、乙双方同意合作生产的第一台合同产品是乙方设计的3000吨3.6米立式弯板机。1.1.13000吨立式弯板机的技术规范:立式弯板机可以进行下列在机器工作能力范围以内的工作:冷弯、热弯、钢板矫直、折边及锥形件弯制。弯板机的能力包括下列特别的弯曲要求:厚度:(mm)756060130外径(mm)1250612012202260板高(mm)3600220022002300屈服强度kg/平方毫米35605025(板材提升到机器中心高度)还将提供一台微型计算机,配有

共3页,当前第1页123

展开阅读全文

更多相似范文

篇1:技术咨询协议书公司

范文类型:合同协议,适用行业岗位:技术,企业,全文共 563 字

+ 加入清单

技术咨询协议书(公司)

委托方:_________(公章)(甲方)

顾问方:_________(公章)(乙方)

中介方:_________(公章)

合同登记机关:_________(公章)

签订日期:__________________年________月________日

合同有效期限:__________________年________月________日至_________年________月_________日

一、具体咨询内容:_________

二、委托方应提供给顾问方的文件、提供文件的期限以及其他委托方应予协作的事项:_________

三、对顾问方完成的技术报告的具体要求:_________

四、技术情报和资料的保密:_________

五、顾问方完成技术报告的时间期限:_________

六、验收、评价方法:_________

七、报酬及其支付方式、支付时间:_________

八、违约责任:_________

九、争议的解决办法:_________

委托方(公章)

负责人:_________

地址

电话

帐号

开户银行

签订日期:

顾问方(公章)

负责人:_________

地址

电话

帐号

开户银行

签订日期:

中介(公章)

负责人:_________

地址

电话

帐号

开户银行

鉴证单位意见:_________

(公章)负责人:_________

签订日期:

展开阅读全文

篇2:研究技术开发项目合作合同

范文类型:合同协议,适用行业岗位:技术,全文共 2054 字

+ 加入清单

委托单位(甲方):________

承担单位(乙方):________

受委托管理单位(丙方):________

一、________研究技术开发计划自筹项目下达后,由________自治区科学技术厅(甲方)、项目承担单位(乙方)及受委托管理单位(丙方)三方共同协商,签订《________研究与技术开发计划项目合同》并共同遵照执行。

合同签订各方必须具备法人资格。

二、本合同蓝本作为________研究与技术开发计划经费自筹项目(不含软科学项目)的合同统一格式。

必要时可对条款作增、删或增加附件。

三、合同编号由________自治区科技厅发展计划处统一编制。

四、正式合同用4纸,单面打印

第一条 签订合同依据

________号文件下达的________研究与技术开发计划项目“________”,由________(乙方)承担。

(甲方)委托________(丙方)管理该项目。

为保证该项目的完成,依据中华人民共和国有关法律及________研究与技术开发计划项目管理的有关规定,经甲、乙、丙三方共同协商,达成以下协议。

第二条 项目研究开发的内容及要求

1、项目研究开发的总体目标、主要内容、工艺技术路线及要求解决的技术关键和问题

2、项目的考核指标(项目要求达到的技术指标、经济指标和预期效益)

3、项目的研究、开发、试验地点及规模

4、计划进度安排(分年度、分课题)

5、本项目应于______年____月前完成,并提供如下成果:

(1)鉴定验收所需的整套资料;

(2)______________________。

第三条 甲方的权利及责任

1、甲方可以根据科技发展与市场变化情况调整或终结项目,符合鉴定验收条件的组织或委托有关部门(单位)主持鉴定验收。

2、甲方可以委托有关部门或单位对本项目实施情况进行调查了解。

3、对不履行合同的乙方,甲方2年内不受理其科技项目申请和科技成果报奖。

第四条 乙方的权利及责任

1、乙方负责项目研究开发的全过程,为项目的实施提供人、财、物等条件,并执行第二条规定。

乙方分工:(乙方不是1个单位时要写明各单位的分工情况)

协作单位分工:(有协作单位时要注明协作单位的分工情况)

2、为保证项目任务的完成,乙方成立项目课题组,确定主要研究、开发人员及分工如下:

姓名:________

性别:________

出生年月:______年____月

职称:________

从事专业:________

工作单位:________

研究开发中的责任分工:________

3、乙方负责落实项目全部经费(______万元),来源如下(提供资金的部门、单位和金额):________________________________________________

4、乙方应主动配合丙方(或甲方委托的其他部门、单位)对项目实施情况进行调查了解等相关工作。

5、乙方在项目终结之前执行年度情况报告制度,即在每年12月20日前向甲方和丙方书面报告项目实施情况;并按甲方要求填报有关项目统计报表。

6、乙方按本合同第二条规定的内容和指标完成任务后,须同时向甲方和丙方提交本合同第二条第5款规定的项目整套资料。

7、乙方拥有本项目技术成果的所有权,并对项目技术资料负有保密责任,不得散失,不得泄密。

第五条 丙方的权利及责任

丙方根据甲方的要求,对本项目实施进行管理,负责全程跟踪、协调项目的实施,定期将项目执行情况反馈甲方,按照甲方委托要求主持项目的鉴定验收工作。

第六条 共同条款

1、在合同有效期内,本合同条款及内容的任何变更、修改或增删,须经甲、乙、丙三方协商同意。

2、合同履行过程中若发生争议,签约各方应当协商或调解解决,如协商或调解不成,按有关法律的规定处理。

3、本合同自甲、乙、丙三方代表签字盖章之日起生效。

有效期至甲方同意项目终结之日终止。

在合同有效期内,签约各方均负有法律责任。

4、本合同一式____份,其中分存甲方2份,乙方____份,丙方____份。

签订合同各方:

甲方:________

法人代表(或受委托人):________

项目管理负责人:________

签章日期:______年____月____日

乙方:________

法人代码:________

法人代表(或受委托人):________

项目负责人:________

签章日期:______年____月____日

丙方:________

项目管理负责人:________

签章日期:______年____月____日

签订合同各方联系人及联系地址:

甲方联系人:________

电话:________

传真:________

邮编:________

地址:________

-(电子信箱):________

乙方联系人:________

电话:________

传真:________

邮编:________

地址:________

-(电子信箱):________

丙方联系人:________

电话:________

传真:________

邮编:________

地址:________

-(电子信箱):________

展开阅读全文

篇3:技术咨询合同参考样本_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 3239 字

+ 加入清单

技术咨询合同参考样本

合同编号:

项目名称:

委托方(甲方):

受托方(乙方):

签订时间:

签订地点:

有效期限:

中华人民共和国科学技术部制

填写说明

一、本合同为中华人民共和国科学技术部制定的技术咨询合同示范文本。

二、本合同书适用于一方当事人(受托方)为另一方(委托方)就特定技术项目提供可行性论证、技术预测、专题技术调查、分析评价报告所订立的合同。

三、签约一方为多个当事人的,可按各自在合同关系中的作用等,在“委托方”、“受托方”项下(增页)分别排列为共同委托人或共同受托人。

四、本合同书未尽事项,可由当事人附页另行约定,并作为本合同的组成部分。

五、当事人使用本合同书时约定无需填写的条款,应在该条款处注明“无”等字样。

委托方(甲方):

住 所 地:

法定代表人:

项目联系人:

联系方式

通讯地址:

电 话:

传 真:

电子信箱:

受托方(乙方):

住 所 地:

法定代表人:

项目联系人:

联系方式

通讯地址:

电 话:

传 真:

电子信箱:

本合同甲方委托乙方就 项目进行技术咨询,并支付咨询报酬。双方经过平等协商,在真实、充分地表达各自意愿的基础上,根据《中华人民共和国合同法》的规定,达成如下协议,并由双方共同恪守。

第一条 乙方进行技术咨询的内容、要求和方式:

1.咨询内容:

2.咨询要求:

3.咨询方式:

第二条 乙方应当按照下列进度要求进行本合同项目的技术咨询工作:

第三条 为保证乙方有效进行技术咨询工作,甲方应当向乙方提供下列协作事项:

1.提供技术资料:

(1) ;

(2) ;

(3) ;

(4) 。

2.提供工作条件:

(1) ;

(2) ;

(3) ;

(4) 。

3.其他:

甲方提供上述协作事项的时间及方式:

第四条 甲方向乙方支付技术咨询报酬及支付方式为:

1.技术咨询报酬总额为:

2.技术咨询报酬由甲方 (一次或分期)支付乙方。

具体支付方式和时间如下:

(1)

(2)

(3)

乙方开户银行名称、地址和帐号为:

开户银行:

地址:

帐号:

第五条 双方确定因履行本合同应遵守的保密义务如下:

甲方:

1.保密内容(包括技术信息和经营信息):

2.涉密人员范围:

3.保密期限:

4.泄密责任:

乙方:

1.保密内容(包括技术信息和经营信息):

2.涉密人员范围:

3.保密期限:

4.泄密责任:

第六条 本合同的变更必须由双方协商一致,并以书面形式确定。但有下列情形之一的,一方可以向另一方提出变更合同权利与义务的请求,另一方应当在日内予以答复;逾期未予答复的,视为同意:

1. ;

2. ;

3. ;

4. 。

第七条 双方确定,按以下标准和方式对乙方提交的技术咨询工作成果进行验收:

1.乙方提交技术咨询工作成果的形式:

2.技术咨询工作成果的验收标准:

3.技术咨询工作成果的验收方法:

4.验收的时间和地点:

第八条 双方确定,按以下约定承担各自的违约责任:

1. 方违反本合同第 条约定,应当(支付违约金或损失赔偿额的计算方法)。

2. 方违反本合同第 条约定,应当(支付违约金或损失赔偿额的计算方法)。

3. 方违反本合同第 条约定,应当(支付违约金或损失赔偿额的计算方法)。

4. 方违反本合同第 条约定,应当(支付违约金或损失赔偿额的计算方法)。

第九条 双方确定,甲方按照乙方符合本合同约定标准和方式完成的技术咨询工作成果作出决策并予以实施所造成的损失,按以下第 种方式处理:

1.乙方不承担责任。

2.乙方承担部分责任。具体承担方式为:

3.乙方承担全部责任。

第十条 双方确定:

1.在本合同有效期内,甲方利用乙方提交的技术咨询工作成果所完成的新的技术成果,归 (甲、双)方所有。

2.在本合同有效期内,乙方利用甲方提供的技术资料和工作条件所完成的新的技术成果,归 (乙、双)方所有。

第十一条 双方确定,在本合同有效期内,甲方指定

为甲方项目联系人,乙方指定 为乙方项目联系人。项目联系人承担以下责任:

1. ;

2. ;

3. 。

一方变更项目联系人的,应当及时以书面形式通知另一方。未及时通知并影响本合同履行或造成损失的,应承担相应的责任。

第十二条 双方确定,出现下列情形,致使本合同的履行成为不必要或不可能的,可以解除本合同:

1.发生不可抗力;

2. ;

3. 。

第十三条 双方因履行本合同而发生的争议,应协商、调解解决。协商、调解不成的,确定按以下第种方式处理:

1.提交 仲裁委员会仲裁;

2.依法向人民法院起诉。

第十四条 双方确定:本合同及相关附件中所涉及的有关名词和技术术语,其定义和解释如下:

1. ;

2. ;

3. ;

4. ;

5. ;

第十五条 与履行本合同有关的下列技术文件,经双方以 方式确认后,为本合同的组成部分:

1. ;

2. ;

3. ;

4. 。

第十六条 双方约定本合同其他相关事项为:

第十七条 本合同一式份,具有同等法律效力。

第十八条 本合同经双方签字盖章后生效。 甲方: (盖章)

法定代表人/委托代理人: (签名)

年 月 日 乙方: (盖章)

法定代表人/委托代理人: (签名)

年 月 日 项目负责人: (签字)

年 月 日 印花税票粘贴处:

(以下由技术合同登记机构填写)

技术合同登记证书

登记号*

根据《技术合同认定登记管理办法》和《江苏省技术合同登记管理办法》的有关规定,经审查,贵单位签订的合同属于《中华人民共和国合同法》所称的技术合同,合同协议金额为人民币 元,其中,技术交易额为人民币 元,现予登记。

请在协议本登记证书之日起30日内,向 科技行政部门申请认定。

登记机构: (签章)

主审登记员编号: (签名及签章)

复核登记员编号: (签名及签章)

登记证书签发人: (签名及签章)

*登记证书号码应当按照1999年5月国家科技部全国技术市场统计调查方案确定的编码方式编号

展开阅读全文

篇4:污水技术合同格式

范文类型:合同协议,适用行业岗位:技术,全文共 419 字

+ 加入清单

甲方:____________煤电开发有限公司

乙方:

设计院:____________设计研究院

____________煤电开发有限公司(以下简称甲方)经招标委托______公司(以下简称乙方)为甲方设计制造____________矿井设备。____________矿井由____________设计院(以下简称设计院)设计。经甲方、乙方、设计院三方协商达成如下技术协议。

一、主要技术要求

1、____________矿井设备按照设计院提供的技术规格书来设计制作,分为_______。

2、适用型号:

3、主要技术特性:

4、配置:

5、结构尺寸:

二、其它有关要求

1、乙方应向甲方提供_______设备总图及_______设备安装图各一份。

2、乙方应向甲方提_____品合格证及_______报告,煤安标志及发货清单。

3、产品加工完毕后,由甲方到乙方进行验收(或约定中间验收),合格后方可出厂。

4、本协议一式六份,甲方、乙方、设计院各两份,签字生效。

展开阅读全文

篇5:技术出口合同范本_合同范本

范文类型:合同协议,适用行业岗位:技术,外贸,全文共 49001 字

+ 加入清单

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run, Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract,the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

展开阅读全文

篇6:兼职技术顾问聘用协议书_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 1412 字

+ 加入清单

兼职技术顾问聘用协议书

甲方:

乙方:

甲、乙双方根据平等、自愿、协商一致的原则,就甲方聘用乙方担任兼职技术顾问一事达成如下协议,并订立本协议,双方共同信守。

一、聘用岗位及职责

甲方聘用乙方担任本公司的兼职技术顾问,负责公司的产品设计、技术开发和研制、技术革新和改进、技术的保密和管理、技术指导和咨询服务等。

二、聘用期及工作时间

聘胜时间总计为期三年,自20xx年11月01日开始起算至 20xx年 10月31 日止。合同期满,双方协商重新签订。

乙方的工作时间为弹性工作时间,但需保持通讯畅通。甲方提前三天召集乙方开会,乙方无特殊原因,须按时出席。

三、聘用报酬及工作费用、社会保险

乙方的报酬为每月的月薪 5000 元(人民币),由甲方在次月的15日前支付。如因工作需要,而发生的差旅费、招待费等,按甲方的有关规定执行。

乙方作为公司专利的主创人,应享受专利带来的收益。由乙方主创专利的收益额不超过1000万元的部分,按1%进行提成;1000-5000万元的部分,按0.5%进行提成;超过5000万元的部分,按0.25%进行提成。以上专利收益的提成均为税后。

鉴于乙方是兼职工作的原因,甲方不为乙方办理社会保险。

四、技术成果及归属

乙方主要为甲方提供和研制等技术咨询。乙方在甲方兼职期间,因履行职务或者主要是利用甲方的物质技术条件、业务信息等产生的发明创造、作品、计算

机软件、技术秘密或其他商业秘密信息,有关的知识产权均属于甲方所有。甲方可以在业务范围内充分自由的利用这些发明创造、作品、计算机软件、技术秘密或其他商业秘密信息,用于申请权利保护、生产经营或者向第三方转让。乙方应当按甲方的要求,提供一切必要的信息和采取一切必要的行动,包括申请、注册、登记等,协助甲方取得和行使有关的知识产权。乙方在离职后无权在继续使用该技术或转让该技术。

五、保密责任

1、乙方兼职职期间的保密义务,乙方除了履行职务的需要之外,承诺承担下列保密义务:

(1)乙方在兼职期间,必须遵守甲方规定的任何成文或不成文的保密规章、制度,履行与其工作岗位相应的保密职责;

(2)未经甲方同意不得刺探与本职工作或本身业务无关的商业秘密;

(3)未经甲方同意不得以泄露、告知、公布、发布、出版、传授、转让或者其他任何方式使任何第三方(包括按照保密制度规定不得知悉该项秘密的甲方其他成员)知悉属于甲方或者属于他人但甲方承诺有保密义务的技术秘密或其他商业秘密信息;

(4)乙方承诺,在甲方兼职期间,非经甲方事先同意,不在与甲方生产、经营同类产品或提供同类服务的其他企业、事业单位、社会团体等担任任何职务,包括股东、合伙人、董事、监事、经理、职员、代理人、顾问等,并不自营与甲方类似的产品或服务,不为他人类似经营提供任何建议;

2、乙方离职之后的保密义务

双方同意,乙方离职之后仍对其在甲方兼职期间接触、知悉的属于甲方或者虽属于第三方但甲方承诺有保密义务的技术秘密和其他商业秘密信息,承担如同兼职期间一样的保密义务和不擅自使用有关秘密信息的义务,而无论乙方因何种原因离职;

七、违约责任

甲乙双方任何一方违反本协议之约定造成对方损失的,应该按照损失的大小承担违约赔偿责任。

八、争议的解决

本协议经双方签盖公章后生效。因履行本合发生的争议,由争议双方协商解决,

协商不成的,提交深圳市仲裁委员会,依该仲裁委员会的仲裁规则仲裁。

九 、本合同一式两份,具有同等法律效力,甲乙双方各执一份。

甲方: 乙方:

(签章)

展开阅读全文

篇7:技术员员工手册

范文类型:员工手册,适用行业岗位:技术,职员,全文共 2488 字

+ 加入清单

甲方(聘用单位):

地址:

性质:

法定代表人(委托代理人):

乙方(被聘用者):

性别:

家庭住址:

出生年月:

身份证号码:

经甲、乙双方平等协商,自愿签订本合同。

一、聘用岗位及职务

甲方因工作需要,聘用乙方在技术岗位工作,并聘任技术负责人职务。

二、聘用合同期限

(一)本合同自_______年_______月_______日至_______年_______月_______日止,期限为年。试用期自________年____月____日至________年____月____日止,期限为____个月。

(二)本合同自________年____月____日至合同中约定之解除或终止合同的条件出现时止。

三、工作职责、内容和工作条件

(一)乙方的工作职责:全面负责站内技术管理工作。

(二)具体工作内容及要求:保持站内设备正常运行及设备保养工作。

(三)乙方工作时间遵照国家有关规定执行,甲方因工作需要,经与乙方协商同意,可延长工作时间,但不得超过国家劳动法律、法规的规定。

(四)乙方必须按照甲方对本岗位任务和职责的要求,完成规定的数质量指标或工作任务。

(五)甲方根据国家有关规定,按乙方岗位要求提供必需的工作条件和_____设施,保障乙方的安全与健康。

(六)甲方负责对乙方进行职业道德、业务技术、安全作业的教育和培训;乙方在工作过程中必须严格遵守工作规程,有权拒绝执行甲方违规指挥,有权提出批评、检举和控告。

四、工作报酬

(一)甲方根据国家的有关规定和乙方完成工作任务的情况按月核发乙方应得的工资、奖金及各种津补贴。

(二)甲方确需乙方加班时,按国家规定支付给乙方加班费。

五、工作纪律

(一)甲方根据国家法律、法规的有关规定制定工作纪律和规章制度,乙方自觉遵守甲方的工作纪律和规章制度,服从甲方管理。

(二)甲方应切实加强单位内部的岗位责任制,建立健全各项考核制度,做到职权清楚、责任明确、考核严格、奖惩分明。

六、社会_____和福利待遇

(一)甲方依照国家法律、法规和政策规定,为乙方及时足额向社会_____部门缴纳社会_____费。社会_____费中的个人负担部分由甲方按国家规定从乙方月工资中扣除后代缴,由社会_____经办部门按规定记入缴费本人个人账户。经双方协商,也可以由乙方按规定自行缴纳。

(二)乙方患职业病或因工负伤、患病或非因工负伤、以及女工孕期、产假和哺乳期间的待遇,按国家和省有关规定执行。乙方医疗期满或痊愈后,不能从事原工作被解除聘用合同时,由甲方按国家和省的有关规定发给乙方医疗补助费。

(三)乙方因工或因病死亡丧葬补助费,供养直系亲属的抚恤费、救济费、医疗费等按国家和省有关规定执行。

(四)甲方保障乙方依法享受公休假日、婚丧假、带薪年休假等。

七、聘用合同的终止、解除、续订和变更

(一)本合同期限届满,即行终止。

(二)本合同双方约定的终止条件出现,即行终止。

(三)本合同经甲、乙双方协商一致,可以解除。

(四)乙方有下列情形之一的,甲方可以解除聘用合同:

1、在试用期被证明不符合聘用条件。

2、严重违反劳动纪律或者甲方规章制度。

3、连续____年考核不合格。

4、严重失职、_____,营私舞弊,对甲方利益造成重大损害。

5、被依法追究刑事责任或劳动教养责任。

(五)有下列情形之一的,甲方可以与乙方解除聘用合同,但应提前____日书面通知乙方:

1、乙方患病或非因工负伤,医疗期满后,不能从事原工作也不能从事甲方另行安排的适当工作。

2、乙方不能胜任工作,经培训或调整岗位后仍不能胜任工作。

3、本合同订立时所依据的客观情况发生重大变化,致使原聘用合同无法履行,经甲、乙双方协商不能就变更合同达成协议。

4、乙方不能履行聘用合同。

(六)甲方经营发生严重困难,确需裁员时,可依法定程序裁员。

(七)乙方有下列情形之一,甲方不得依本条(五)、(六)项规定解除合同:

1、乙方患职业病或因工负伤并被确认丧失或部分丧失劳动能力。

2、患病或负伤,在法定医疗期内。

3、女职工在孕期、产期、哺乳期内。

4、国家法律、行政法规规定的其它情形。

(八)乙方解除本合同,应提前____日书面通知甲方。

(九)有下列情形之一,乙方可随时通知甲方解除合同:

1、试用期内。

2、甲方以暴力、_____或非法限制人身自由的手段强迫劳动。

3、甲方未按合同约定支付劳动报酬或提供劳动条件。

4、国家法律、行政法规规定的其他情形。

(十)从事_____工作,或曾从事_____工作,在规定的保密期内,按国家有关规定,不得解除聘用合同。承担专业技术工作或管理工作的受聘人员,如提前解除或终止聘用合同,可能给单位代理技术项目终止、引发知识产权纠纷、技术泄密造成较大经济损失的,在聘用合同解除或终止的条件未具备时,不得提前解除或终止聘用合同。

(十一)甲方依据本条第(三)、(五)、(六)项解除合同时依法给予经济补偿金。

(十二)经甲、乙双方协商同意,可以续延本合同期限,办理续订手续。

(十三)甲方因生产经营状况发生变化,经与乙方协商同意,可变更合同有关条款内容,办理合同变更手续。

(十四)乙方被依法开除、劳动教养、判刑的,本合同自行解除。

(十五)本合同依法订立后,不因承办人或法定代表人变动而解除。

八、违反合同的责任

(一)由于当事人一方的过错,造成合同不能完全履行,由有过错的一方承担违约责任;如属双方的责任,根据实际情况,由双方分别承担各自应付的违约责任。

(二)当事人由于不可抗拒的原因不能履行合同的,应及时向对方通报不能履行或者需要延期履行部分合同的理由。在取得有关证明后,允许延期履行、部分履行或者不履行,并可根据情况部分或者全部免于承担违约责任。

(三)当事人一方违反合同,应承担违约责任,向对方支付违约金____元;给对方造成严重经济损失的,应根据责任大小及后果追究经济赔偿责任。

(四)其它违约责任:

九、本合同一式____份,甲、乙双方各执____份,本合同约定事项违背国家法律法规、或涂改、或未经合法授权代签无效。

甲方(盖章):

法定代表人(签字):

签署时间:________年____月____日

乙方(签字):

签署时间:________年____月____日

展开阅读全文

篇8:空压机采购技术合同

范文类型:合同协议,适用行业岗位:采购,技术,全文共 614 字

+ 加入清单

甲方:

乙方:

甲方在承建的成都市生态水隧道施工中,租赁乙方的空压机1台在隧道施工中使用,双方本着平等互利的原则,经双方充分协商,特签订本合同,双方共同遵守。

一、租赁内容:

乙方将自有的空压机1台出租给甲方使用,空压机的日常保养和维修及操作员由乙方负责,甲方只负责机油。

二、租赁单价:

空压机在工地施工租赁单价为每个月人民币10000元,不足一个月按每月30天平均折算。空压机进场费及安装费由甲方负责,租赁时间为期一年,如果租赁期不满6个月的,那么租赁费按10个月算,出场费并由甲方支付。

三、租赁时间

自空压机进场之日起开始,但甲方至少保证租赁6个月,空压机退场之日结束,按月计算,不足一个月按天计算。

四、甲方责任:

空压机退场之前,甲方将空压机租金全部支付给乙方。乙方空压机在正常使用过程中因意外原因或不可抗力原因损坏的,由甲方负责修复赔偿。

五、乙方责任:

乙方必须安排专职人员负责空压机的`日常保养和维修,所产生的一切费用自行承担,并保证空压机在租赁期间的正常使用。乙方有责任保护好空压机。如果因乙方原因或空压机自身零部件损坏不能正常使用,乙方应负责由此产生的一切责任。乙方保养负责人及操作人员必须服从甲方的安排,确保空压机正常使用。六、违约责任:

甲乙双方方必须遵守自己的权力和义务,按合同条款履行和执行,如有哪方违约。双方有权按《中国人民民法典》到法院起诉。

本协议一式二份,双方各执一份,望双方共同遵守。

甲方:  乙方:

日期:  日期:

展开阅读全文

篇9:煤矿技术员安全保证书

范文类型:保证书,适用行业岗位:煤矿,技术,全文共 200 字

+ 加入清单

尊敬的_________:

作为一名煤矿技术员,为了安全生产,我保证做到:

1、认真学习党的安全生产方针政策,遵守相关法律、法规执行矿井安全生产有关规定、制度、标准及各项规章制度。

2、从安全技术上指导煤层开采、顶板管理、巷道布置、设备造型、使用和维护,井巷维修支护选材和质量管理工作,组织好新工作面的验收、回采工作。

致此

敬礼!

_________

_________年_________月_________日

展开阅读全文

篇10:专有技术转让协议合同书

范文类型:合同协议,适用行业岗位:技术,全文共 2482 字

+ 加入清单

第一条 合同性质

签订本合同的双方为:

甲方:美国卡洛驰责任有限公司

地址:美国 科罗拉多州,尼沃特

授权代表:陈琪,职务:销售经理

身份证号码:___________

乙方:小灵猫哈特发热鞋有限公司

地址:中国,广州国际贸易中心,站西路26号

法定代表人:陈西,职务:销售经理

身份证号码:__________

第二条 定 义

本合同及附件中所引用的技术名词含义分别阐述并明确如下:

2.1. “产品”指合同附件所列的产品。

2.2. “专利”系指登记获有专利权的和经登记获有实用型专利权的 本合同附件所列明的须经申请的专利技术。

2.3. “技术”系指为满足生产、使用、保养及销售该产品所需的技术,并为 乙方目前所持有的或将来能获得的并有权向第三方公开的技术数据、配方、生产 程序、图纸、说明书、手册目录及信息等。

2.4. “商标”系指合同附件所列明的商标为准。

2.5. 乙方保证:按双方协定时间提供的技术信息应是准确的、完整的和清晰 的,并且由乙方提供的实用技术是最先进的;合营公司按乙方的要求,在正确的 应用其技术的状况下,合营公司的产品应达到国际(或国内)的先进水平。

2.6 有效日期

该合同有效期自20xx年1月1日至20xx年1月1日。

第三条 专利和商标的使用

3.1. 按合同的规定生产、使用和销售该产品外,不经乙方同意,甲方公司不 得使用其专利、技术和商标。

3.2. 事先未得到书面同意,甲方公司不得对所生产的产品进行修改。甲方公司生产的产品与乙方生产的产品质量应相同。乙方有权采取任何必要的措施确保 甲方公司的产品达到规定的质量水平。

3.3. 合营公司按照双方的议定,在销售产品上须标志商标时,应标明该产品 是按乙方的许可制造。

第四条 第三方伪造及侵权

甲方公司若发现有任何伪造的产品、或侵犯专利或商标时,应立即通知乙方。 虽然,仅乙方独家拥有对第三方伪造的产品、侵犯专利或商标的行为采取追究甚至是诉讼(或采取其他行动)的权利,但乙方对甲方公司就上述有关情况而提出的各种建议,应给予充分考虑。为此,乙方可以甲方公司名义作原告或双方联合作原告,合营公司对此不应无理由的予以拒绝,但须先取得甲方公司的书面同意。

第五条 递交程序说明书

5.1 按合同规定,乙方应向甲方提交完整的技术程序说明书包括:设计、计算、图纸、生产工艺、质量控制、测试、安装调整、操作和维护方法。所提供协议

涉及的产品的必须与小灵猫公司的产品相同。

5.2 按合同规定,乙方必须保证技术文件的递交不受任何第三方任何指控。

第六条 技术培训

6.1. 按合同规定,乙方应向甲方公司提供技术培训,以提高公司雇员的技术水平。

6.2. 乙方同意向合营公司选拔的雇员按下述技术范围提供培训:C10103 小灵猫产 品的制造、发展、销售和使用;加工生产及有关工厂实习。

6.3. 乙方不提供与制造、销售或维修保养该产品无直接关系的任何事宜的培训,亦不提供乙方对第三方承担有保密义务项目的培训。

6.4. 培训人数和内容、地点、期限及其他有关培训事宜由如下合营公司与乙方商定。

6.5. Crocs公司若需要乙方派遣指导人员、技术专家及有关管理人员至Crocs公 司对公司人员进行培训,Crocs公司应支付聘请人员从受雇地至合营公司的全部差旅费及在Crocs公司期间的住宿、膳食及生活津贴费用。

6.6. 按本合同规定,合营公司属下的雇员凡参加并完成由乙方提供的培训计划者,自培训完结后3年内,不得向合营公司提出辞职。

第七条 提成费

7.1. 在本合同及其附件生效后3天内,合营公司应支付售出该产品的总 销售额1%的提成费。其提成费应根据该产品的数量计算。

7.2. 按合同附件规定的提成费应从得到该项技术之日起执行1年以后,每 年递减0.1%。

第八条保 密

合营公司承认并同意在合同期内由乙方提供的技术系属秘密。合营公司及其 全体雇员和工作人员应按合同列明的目的使用其技术。在未得到乙方事先书面同意,不得向任何第三者公开或透露此技术。自签署合同至终止合同,该项技术的保密期限为20xx年。

第九条 仲 裁

9.1. 凡因本合同引起的或与本合同有关的任何争议,均应提交中国国际经济贸易仲裁委员会,按照申请仲裁时该会现行有效的仲裁规则在深圳进行仲裁,仲裁裁决是终局的,对双方均有约束力。仲裁适用中华人民共和国法律。

9.2 除非另有规定,仲裁不得影响合同双方继续履行合同所规定的义务。

第十条 不可抗力

10.1. 双方遇有无法控制的事件或情况应视为不可抗力事件,但不限于火灾、 风灾、水灾、地震、爆炸、战争、叛乱、暴动、传染病及瘟疫。若遭受不可抗力 事件的一方导致另一方不能履行合同规定的义务时,应将履行合同的时间延长, 延长至与发生不可抗力事件所延误的时间相等。

10.2. 遭受不可抗力事件影响的一方立即用电话或传真将发生不可抗力的事 件通知另一方,并于15天内用航空挂号

信将有权证明的机构出具的发生不可抗力 事件的证明书寄给另一方。若因不可抗力引起的延误时间超过60天时,双方应通 过友好协商进一步解决履行合同事宜。

第十一条 合同文字和工作语言

11.1.本合同及附件中、英文书就,两种文字均具有同等法律效力,中英文 不一致的,以中文为准。

11.2 合营公司的重要文件,一律用中、英文书就,两种文字均具有同等法律效力。双方同意用英语和汉语为工作语言。

第十二条 其 他

12.1. 本合同中的标题,仅为醒目参考用,不影响本合同的意义和解释。

12.2. 合同的中、英文本各一式两份,每种文本双方各持 份。

12.3. 甲、乙方及合营公司之间的通讯来往均以中、英文为准。

12.4. 按本同规定任何一方发出的通知或通讯,应以书面文字为准并按对方 所列的上述地址寄出后 天,视为有效送达。

甲 方(签章):_________ 乙方(签章):________________

授权代表(签字):________ 授权代表(签字):_______________

___ 年___ 月___日于______ 年___月 ___日___于______

展开阅读全文

篇11:技术咨询合同书

范文类型:合同协议,适用行业岗位:技术,全文共 1055 字

+ 加入清单

项目名称:____________________________

委托方(甲方):___________________________

顾问方(乙方):____________________________

依据《中华人民共和国民法典》的规定,合同双方就________项目的技术咨询,(该项目属____计划),经协商一致,签订本合同。

一、咨询的内容、形式和要求:

二、履行期限、地点和方式:本合同自____年__月__日至____年__月__日在________(地点)履行。本合同的履行方式:

三、委托方的协作事项:在合同生效后________(时间)内,委托方应向顾问方提供下列资料和工作条件;其他:

四、技术情报和资料的保密:

五、验收、评价方法:咨询报告达到本合同第一项所列的要求,采用方验收,由方出具技术咨询验收证明。评价方法:

六、报酬及其支付方式:

(一)本项目报酬(咨询经费):____________元。顾问方进行调查研究、分析论证、试验测定的经费为____元,由____方负担。此项经费如包含在咨询经费中则不再单列

(二)支付方式(采用以下第____种方式)

①一次支付:________元,时间:________________

②分期支付:________元,时间:____________________________元,时间:________________

③其他方式:

七、违约金或者损失赔偿额的计算法:违反本合同约定,违约方应当按_________________________________规定,承担违约责任。

(一)违反本合同第____条约定,____方应当承担违约责任,承担方式和违约金额如下:

(二)违反本合同第____条约定,____方应当承担违约责任,承担方式违约金额如下:

八、争议的解决办法:在合同履行过程中发生争议,双方应当协商解决,也可以请求________进行调解。双方不愿协商、调解解决或者协商、调解不成的,双方商定,采用以下第种方式解决。

1.由仲裁委员会仲裁;2.向人民法院起诉。

九、其他(含中介方权利、义务、服务费及其支付方式等上述条款未尽事宜):

十、本合同有效期限:____年____月____日至____年____月____日

甲方:____________________ 乙方:____________________

代表人:________________ 代表人:________________

____年____月____日____年____月____日

展开阅读全文

篇12:专利和专有技术使用许可合同

范文类型:合同协议,适用行业岗位:技术,全文共 5213 字

+ 加入清单

专利专有技术使用许可合同

许可人:_________

被许可人:_________

鉴于:_________获_____批准,对其资产进行了资产重组(以下简称“重组”),并作为发起人,依据中国法律于_________年_________月_________日,成立了_________公司。_________向_________公司注入重组前属于_________及其下属企业或单位的主营业务,包括石油、天然气的勘探和开发、炼油、化工、管道运输、产品销售、有关科研机构以及相关的资产、负债和所有者权益(以下统称“核心业务”)。_________及其相关下属企业或单位拥有用于核心业务的专利及专有技术,并愿意将该等专利及专有技术许可给_________公司使用,且_________公司有意使用该等专利及专有技术。

据此,双方协议如下:

第1条 许可人

本合同许可人是_________及其全权代表的相关下属企业或单位,其中包括_________本身,以及向_________发出关于代表其签署本合同等事宜的“授权委托书”的_________的全资子公司及其所控制的企业或单位。

第2条 专利和专有技术

2.1 本合同项下的专利是指截止至本合同生效时,

(a)许可人在中华人民共和国境内外与核心业务有关的,已获得专利权授予的由被许可人无偿使用的附件一所列之专利,(以下简称“无偿使用的自有专利”);

(b)许可人在中华人民共和国境内外与核心业务有关的,已获得专利权授予的由被许可人有偿使用的专利(以下简称“有偿使用的自有专利”);

(c)许可人和其他共有人在中华人民共和国境内外共同拥有的与核心业务有关的附件二所列之专利,(以下简称“共有专利”)。自有专利和共有专利以下统称为“许可专利”。

2.2 许可专利内容是指专利证书、说明书、权利要求书及附图等专利文件所涉及的全部技术内容。

2.3 本合同项下的专有技术是指截止至本合同生效时,许可人已经拥有的与核心业务有关的附件三所列的专有技术(以下统称“许可专有技术”)。

第3条 许可

3.1 对无偿使用的自有专利及许可专有技术,许可人允许被许可人及其全资子公司和控股子公司自行继续无偿使用。

3.2 对有偿使用的自有专利,许可人允许被许可人及其全资子公司和控股子公司在重组前的使用范围内继续有偿使用,但须符合双方另行签定且有效的《产品和服务互供总协议》的规定。

3.5 被许可人根据本合同的规定对本合同附件所列之外的许可专利及许可专有技术的使用是非排他性的使用。

第4条 期限

4.1 被许可人可以使用任何一个或多个许可专利及许可专有技术直至该许可专利期限后满或该许可专有技术变成公开信息而不受法律保护或直至双方达成协议的终止使用日期。

第5条 专利和专有技术资料的提交及后续服务的提供

5.1 许可人应自合同生效之日起应被许可人不时之要求将许可专利和许可专有技术资料提交予被许可人。

5.2 许可专利和许可专有技术实施的后续服务应保证许可专利及许可专有技术的有效实施,具体应视不同情况而定。需许可人提供技术人员予以指导的,许可人应予以充分合作,并安排专人负责有关指导工作。

第6条 维护费用

对于无偿使用的专利、专有技术,被许可人须于每年12月31日之前向许可人支付该年度许可人按照法律、法规的规定为维系该等许可专利及许可专有技术的有效性而已经实际支出的费用。但是,被许可人不需向许可人支付按照本合同的规定被许可人已经停止使用的本合同项下一个或多个许可专利及许可专有技术的维系费用。

第7条 双方的权利和义务

7.1 许可人的权利:

(a)有权在自身范围内制造、使用、销售与许可专利及许可专有技术有关的产品,或者使用许可专利方法及许可专有技术。

(b)有权取得被许可人对许可专利及许可专有技术改进部分的使用权,但应补偿被许可人因该等改进而合理支出的费用。

(c)有权获得许可专利及许可专有技术所申请的各级发明和科技奖励。

(d)有权要求被许可人依本合同约定支付本合同第6条规定的费用。

7.2 许可人的义务:

(a)许可人允许第三方使用或向第三方转让许可专利及许可专有技术,应遵守本合同3.4条、3.5条的规定。

(b)根据本合同第2条及第5条的规定,提供全部技术资料和技术服务。

(c)按时向有关机关交纳有关维系许可专利申请和许可专利权的有效性的费用。

(d)对被许可人在实施过程中有关的技术及其经营秘密承担保密义务。本条规定的保密义务在本合同终止后继续有效。

(e)根据被许可人要求或专利权保护需要,向国家有关机构就有关许可专利申请保护。

(f)承诺并保证本合同项下许可专利及许可专有技术许可的合法性。如果有第三方因本合同向被许可人提出权利请求或诉讼时,许可人有义务赔偿被许可人因此而致的一切损失及费用支出。

(g)根据3.3条规定,承诺取得共有专利的其他共有人的同意。

(h)本合同签订后,许可人负责依法向专利管理机关办理本合同备案存查手续。

7.3 被许可人的权利:

(a)有权在本合同规定的范围内制造、使用和销售与许可专利及许可专有技术有关的产品,或者使用许可专利方法及许可专有技术。

(b)有权获得实施和使用许可专利及许可专有技术所必要的全部技术资料和技术服务。

(c)有权得到许可人对许可专利及许可专有技术改进部分的使用权,但应补偿许可人因该等改进而合理支出的费用。

(d)有权对许可专利及许可专有技术进行改进,由被许可人_____进行的改进,其改进部分归被许可人所有。

(e)就许可专利及许可专有技术实施后取得的成果,有申请各级发明和科技奖励的权利。

(f)有权就许可专利产品及许可专有技术产品参加各级名优产品的评比,所获得的荣誉和物质利益归被许可人所有。

7.4 被许可人的义务:

(a)被许可人与第三人就许可专利及许可专有技术再签订使用许可合同应事先通知许可人,并获得许可人同意,且应遵守本合同3.4条、3.5条的规定。

(b)如发生许可专利及许可专有技术侵权事宜,许可人负责向有关部门投诉或起诉,被许可人应当协助查明。

(c)被许可人对本合同项下的许可专有技术和提交的资料承担保密义务。本条规定的保密义务在本合同终止后继续有效。

(d)承担生产、销售许可专利产品应缴纳的各种税款。

(e)按本合同第6条规定向许可人支付有关费用。

第8条 双方进一步的保证

许可人和被许可人有义务采取进一步的其他必要的行动,包括签署其他有关的协议或合同或文件,以确保本合同宗旨和规定内容的实现。

第9条 合同的变更和终止

9.1 对本合同的任何变更,须经双方同意,并以书面形式作出方可生效。

9.2 本合同按下列方式终止:

(a)本合同期限后满,或

(b)本合同有效期限内双方达成终止协议,或

(c)本合同任何一方因地震、风暴、水灾、战争等不可抗力丧失继续履行本合同的能力,或

(d)根据法律、法规的规定,或有管辖权的法院或_____机构所做出的终止本合同的判决、裁定或决定而终止本合同。

9.3 无论9.1和9.2条如何规定,每年12月31日之前,被许可人有权按其生产经营需要,决定终止使用本合同项下一个或多个许可专利及许可专有技术,并须在该日之前书面通知许可人该等终止。一俟被许可人按前款规定终止使用该等专利及专有技术,则被许可人从下一个年度起对该等专利及专有技术不再支付本合同第6条所规定之费用。

第10条 违约责任

任何一方违约,另一方可以要求或采纳本合同和法律所允许的补救措施,包括但不限于实际履行和补偿经济损失。

第11条 双方的陈述和保证

11.1 许可人的陈述和保证:

(a)许可人是依法成立的企业,具有_____的法人资格,现持有有效的营业执照。

(b)许可人一直依法从事经营活动,并未从事任何超出法律规定的营业范围的活动。

(c)许可人为签署本合同所需的一切政府审批(如需要)以及内部授权程序都已获得或完成,签署本合同的是许可人的有效授权代表,并且本合同一经签署即构成对许可人有约束力的责任。

(d)许可人签署本合同或履行其在本合同项下的义务并不违反其订立的任何其他协议或其公司章程,亦不违反任何法律、法规或规定。

11.2 被许可人的陈述和保证:

(a)被许可人是依法成立的股份制企业,具有_____的法人资格,现持有有效的营业执照。

(b)被许可人一直依法从事经营活动,并未从事任何超出法律规定的营业范围的活动。

(c)被许可人为签署本合同所需的内部程序都已完成,签署本合同的是被许可人的有效授代表,并且本合同一经签署即构成对被许可人有约束力的责任。

(d)被许可人签署本合同或履行其在本合同项下的义务并不违反其订立的任何其他协议或其公司章程,亦不违反任何法律、法规或规定。

第12条 不可抗力

12.1 如果本合同任何一方因受不可抗力事件(不可抗力事件指受影响一方不能合理控制的,无法预料或即使可预料到也不可避免且无法克服,并于本合同签订日之后出现的,使该方对本合同全部或部分的履行在客观上成为不可能或不实际的任何事件。此等事件包括但不限于水灾、火灾、旱灾、台风、地震、及其它自然灾害、交通意外、_____、骚动、_____及战争(不论曾否宣战)以及政府部门的作为及_____)影响而未能履行其在本合同下的全部或部分义务,该义务的履行在不可抗力事件妨碍其履行期间应予中止。

12.2 声称受到不可抗力事件影响的一方应尽可能在最短的时间内通过书面形式将不可抗力事件的发生通知另一方,并在该不可抗力事件发生后十五日内以手递或挂号空邮向另一方提供关于此种不可抗力事件及其持续时间的适当证据。声称不可抗力事件导致其对本合同的履行在客观上成为不可能或不实际的一方,有责任尽一切合理的努力消除或减轻此等不可抗力事件的影响。

12.3 不可抗力事件发生时,双方应立即通过友好协商决定如何执行本合同。不可抗力事件或其影响终止或消除后,双方须立即恢复履行各自在本合同项下的各项义务。如不可抗力及其影响无法终止或消除而致使合同任何一方丧失继续履行合同的能力,则适用本合同9.2(c)关于合同终止的规定。

第13条 其他规定

13.1 除本合同另有规定外,未经另一方书面同意,任何一方不得转让其在本合同项下的全部或部分权利或义务。

13.2 本合同及其附件构成双方全部协议,并取代双方以前就该等事项而达成之全部口头或书面的协议、合约、理解和通信。

13.3 本合同任何一条款成为非法、无效或不可强制执行并不影响本合同其它条款的效力及可强制执行性。

13.4 本合同或其附件的修订仅可经书面协议并经双方授权代表签字且须经双方采取适当的法人行动批准而作出。

13.5 除非另有规定,一方未行使或延迟行使其在本合同项下的权利、权力或_____并不构成对这些权利、权力或_____的放弃,而单一或部分行使这些权利、权力或_____并不排斥任何其它权利、权力或_____的行使。

13.6 本合同附件是本合同不可分割的组成部分,并与本合同具有同等约束力,如同已被纳入本合同。

第14条 通讯

一方根据本合同规定作出的通知或其它通讯应采用书面形式并以中文书写,并可经专人手递或挂号邮务发至以下规定的另一方地址,或传真至另一方规定的传真号码,通知被视为已有效作出的日期应按以下的规定确定:

(a)经专人交付的通知应在专人交付之日被视为有效。

(b)以挂号邮务寄出的通知应在付邮(以邮戳日期为准)后第7天(若最后一天是星期日或法定节假日,则顺延至下一个工作日)被视为有效。

(c)以传真形式发出的通知应被视作于传真完毕的时间作出,唯发件人应出示真机就其所发出的文件而打印的报告以证明有关文件已经完满地传给对方。

(d)许可人地址:_________;被许可人地址:_________。

第15条 适用法律和争议的解决

15.1 本合同应适用中华人民共和国法律并应根据中华人民共和国法律解释。

15.2 凡因本合同引起的或与本合同有关的任何争议,由双方协商解决。若协商不成,任何一方均可将该等争议提交______________委员会,按照申请_____时该_____委员会有效的_____规则进行_____。_____裁决是终局的,对双方均有约束力。

第16条 附则

16.1 本合同以中文书写。

16.2 本合同正本一式_________份。本合同在双方授权代表签署并加盖公章后生效,且其效力追溯至_________年_________月_________日,各份合同具有同等效力。

许可人(盖章):_________    被许可人(盖章):_________

法定代表人(签字):_________   法定代表人(签字):________

__________年____月____日    _________年____月____日

签订地点:_________     签订地点:_________

附件

一、无偿使用的自有专利清单(略)

二、共有专利清单(略)

三、专有技术清单(略)

展开阅读全文

篇13:专利技术转让电子合同

范文类型:合同协议,适用行业岗位:技术,全文共 943 字

+ 加入清单

甲方(受让方):身份证或营业执照号码:住址:电话:乙方(转让方):身份证或营业执照号码:住址:电话:

鉴于:

本合同签约各方就本合同所述内容经过平等协商,在真实、充分地表达各自意愿的基础上,根据《中华人民共和国合同法》和《中华人民共和国专利法》之规定,达成如下协议,由签约各方共同恪守。

第一条签约方

甲方(甲方):

乙方(乙方):

第二条合同性质

本合同属于专利权转让合同。

第三条签约时间和地点

本合同由上述签约方于年月日在签订。

第四条项目名称(获得专利权的发明/实用新型/外观设计名称全称):

第五条技术状况

1、本合同转让的专利权属于:(发明/实用新型/外观设计)

2、专利权人:

3、发明人/设计人:

4、专利授权日:

5、专利号:

6、专利有效期限:

7、专利年费已交至______年。

第六条申请专利使用情况

1、乙方保证上述第五条技术内容的真实性、其转让的专利权的合法有效性。

2、乙方对本合同生效后专利权被撤消、宣告无效不承担法律责任。

第七条专利实施情况

1、乙方自行实施专利技术的情况(时间、范围、方式):

2、乙方许可他人实施专利技术的状况(时间、范围、方式):

第八条原专利实施许可的履行

1、甲方应当在本合同生效后,保证原专利实施合同的履行,并接受原专利实施许可合同中乙方的权利与义务。

2、乙方保证已经将本专利权的转让告知原实施许可合同的当事人。

第九条专利技术资料

1、资料内容:

2、交付时间:

3、交付地点:

4、交付方式:

第十条费用及支付方式

1、本合同费用总额为元(大写:)。

2、本合同费用,按以下第种方式支付:

(1)一次总付,支付的时间和方式:

(2)分期支付,支付的时间和方式:

第十一条违约责任

任何签约方违反本合同的任何一条,按以下第______种方式承担违约责任:

1、支付元(大写:)违约金;

2、按合同总标的%支付违约金;

3、按实际损失支付赔偿金;

第十二条争议解决方式

1、签约各方因履行合同发生争议,应协商解决;

2、协商解决不成,签约方同意采用以下第种方式解决纠纷。

(1)申请由_____________仲裁委员会仲裁;

(2)向有管辖权的人民法院起诉。

第十三条合同生效

本合同一式份,经双方签字盖章后生效,由负责办理专利权转让合同的登记和公告事宜。

甲方签字或盖章:

乙方签字或盖章:

合同签订地点:

合同签订时间:

展开阅读全文

篇14:国际技术服务合同_合同范本

范文类型:合同协议,适用行业岗位:技术,服务,全文共 1976 字

+ 加入清单

国际技术服务合同(1)

国际技术服务合同

在___注册成立的___公司(以下简称甲方)和中国___公司(以下简称)、于___年___月___日签订本技术服务合同:

第一条

1. 应甲方邀请,乙方同意派遣___名工程师组成的中国技术服务组。于___年___月___日赴___(甲方国名)的___(市)(或某工地);

2. 在___(甲方国名),受甲方邀请的乙方中国技术服务人员应有准备,并且愿意同___甲方的___公司共同工作。

第二条

乙方人员在___(甲方国名)期间,应服从甲方国家的法律,受甲方的管理规章制度约束。

第三条

1.(1)甲方负责向乙方人员支付乙方提出的每个每月___(币别)的免税技术服务费。

(2)上述免税技术服务费的___%应以美元(或英镑)支付。

(3)本条(1)款提及的技术服务费自乙方人员到达___(甲方国名)之日起开始计算。

2.(1)在甲方服务期间,乙主人员在工作或业余的全部时间内,应保证行为端正。

(2)甲方对乙方人员在甲方服务期间的犯罪行为不承担责任。

第四条

甲方负担乙方人员往返中国和___(甲方国名)的国际旅费和第人不超过20公斤的超重行李费,并负责安排机票。

第五条

1. 第三条1(1)款中所提的技术服务费的___%应以___币(即甲方的国币)支付给在___的中国技术服务组,其余___%应由甲方按银行当日公布的况率折成美元(或英镑)。

2. 所折成的美元(或英镑)应电汇___(如伦敦)中国银行转汇北京(或其它中国城市)中国银行营业部___公司(即乙方公司)___号帐户。

3. 甲方应以书面形式将汇款情况通知中国驻甲方国大使馆经参处。

第六条

甲、忆双方执行合同期间,甲方同意:

1. 为乙方技术服务组人员免费提供设备齐全的住宿;

2. 为乙方技术服务组人员免费提供交通工具;

3. 免费提供乙方必要的充分的劳保用品;

4. 为乙方技术人员免费提供人寿保险;

5. 为乙技术服务人员免费提供足够的办公设施和用品;

6. 在指定的医院或诊所为技术服务组人员提供免费医疗,但不包括镶牙、配镜和性病的治疗。

7. 乙方技术服务组人员因公出差,应按照甲方人员待遇,发给出差补助费,以___币(甲方国币)支付给乙方技术服务。

第七条

合同期间,乙方技术人员享受中___(甲方国名)两国的全部公共假日。

第八条

1. 乙方人员第年享受三十天的休假,工资照发(从开始工作之日起算起工作十一个月,第十二个月为休假)。休假期间工资应全部以美无(或英镑)支付。

2. 乙方技术人员每年应得___元(甲方国币)的奖金,奖金的___%以美元(或英镑)支付。

3. 在甲方服务期间,甲方为乙方技术人员回国休假提供往返经济舱机票。

第十条

在合同期间内,乙技术人员由于家庭不幸和/或其它原因,可请紧急事假十天。

1. 准予乙方人员事假时,甲方不负责:

(1) 乙方事假人员旅费;

(2) 本合同第三条1(1)款中所规定的技术服务费;

(3) 因乙方人员事假期满后不能返回___(甲方国名)而换人时所需费用。

3.(1)在合同期间内,由于甲方或所在国原因,致使乙方人员不能工作时,甲方同意:向乙技术人员支付双方同意的技术服务费(见第三条1(1)款);

(2)因甲方原因终止合同、甲方违反合同或阻挠合同履行时,甲方同意:

a、 按合同规定费用,向乙方人员支付三个月的技术服务费(见第三条1(1)款):

b、 执行本合同第四条的规定。

第十一条

1. 乙方技术人员因身体不好或工伤,在两个月内不能痊俞时,乙方同意:

(1) 从中国另行派人替换上述人员;

(2) 承担替换人员从中国到___(甲方国名)的旅费。

(3) 甲方同意承担因病或工伤返回中国人员因工伤致残或死亡,甲方同意:

2、在合同期间内,技术服务组人员工伤致残或死亡,甲方同意:

(1) 处理事故,工伤或死亡的一切善后事宜;

(2) 负担所产生的费用;

(3) 按___(甲方国名)现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。

第十二条

本合同未尺事宜,由双方通过友好协商解决。

双方对本合同的解释如有不同意见,发生分歧和争执,或由本合同产后或与本合同有关的其它事项,应根据___(甲方国名)的现行法律,提交双方均能接受的唯一仲裁解决。

第十三条

本合同的执行从___年___月___日开始,有效期限共___年,此为经一阶段___年合同期满后,双方应进一步商定延续合同期限和与之有关的条件。

第十四条

本合同共两份,分别用中、___文写成,双方各执一份。两种文本具有同等效力,并对双方均有约束力。

甲乙双方于上述日期签字盖章为证。

甲方签字人:______

甲方公司名称:______

见证人姓名:______

地址:______

职务:______

签名:______

乙方签字人:______

乙方公司名称:______

见证人姓名:______

地址:______

职务:______

签名:______

展开阅读全文

篇15:技术合同:技术服务协议_合同范本

范文类型:合同协议,适用行业岗位:技术,服务,全文共 1981 字

+ 加入清单

技术合同:技术服务协议

委托方(以下称甲方):_________

法定代表人或负责人:_________

服务方(以下称乙方):_________

法定代表人或负责人:_________

甲乙双方为携手合作,促进发展,满足利益,明确责任,依据中华人民共和国有关法律之相关规定,本着诚实信用、互惠互利原则,结合双方实际,协商一致,特签订本合同,以求共同恪守:

第一条 项目名称_________。

第二条 服务内容、方式和要求

1.服务内容:_________。

2.方式:_________。

3.要求:_________。

第三条 工作条件:_________。

第四条 报酬及其支付方式:

1.本项目报酬(服务费或培训费):_________元。

服务方完成专业技术工作,解决技术问题需要的经费,由_________方负担。

2.本项目中介方活动经费为:_________元,由_________方负担。中介方的报酬为:_________元,由_________方支付。

3.支付方式为如下第_________种:

(1)合同生效后_________日内向乙方支付报酬总额的_________%;

(2)合同履行完成后(验收合格之日起)_________日内甲方向乙方支付全部报酬余额。

(3)其它方式:_________。

第五条 声明及保证

甲方:

1.甲方为一家依法设立并合法存续的企业,有权签署并有能力履行本合同。

2.甲方签署和履行本合同所需的一切手续均已办妥并合法有效。

3.在签署本合同时,任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对甲方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.甲方为签署本合同所需的内部授权程序均已完成,本合同的签署人是甲方的法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

乙方:

1.乙方为一家依法设立并合法存续的企业,有权签署并有能力履行本合同。

2.乙方签署和履行本合同所需的一切手续均已办妥并合法有效。

3.在签署本合同时,任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对乙方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.乙方为签署本合同所需的内部授权程序均已完成,本合同的签署人是乙方的法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

第六条 甲方的主要义务

1.在合同生效后_________日内向乙方提供下列技术资料、数据、材料、样品:

_________。

2.在接到乙方关于要求改进或更换不符合合同约定的技术资料、数据、材料、样品的通知后_________天内及时做出答复;

3.按约向乙方支付报酬,乙方开户银行帐户为_________。

4.协助乙方完成下列配合事项:

_________。

第七条 乙方的主要义务

1.在_________年_________月_________日前完成技术服务工作;

2.依照下列技术经济指标完成技术服务工作:_________;

3.发现甲方提供的技术资料、数据、样品、材料或工作条件不符合合同约定时,应在合同生效后_________天内通知委托方改进或者更换;

4.应对甲方交给的技术资料、样品等妥善保管;在合同履行过程中,如发现继续工作对材料、样品或设备等有损坏危险时,应中止工作,并及时通知委托方;工作完成后应归还上述技术资料、样品,不得擅自存留复制品。

第八条 保密条款

双方保证对从另一方取得且无法自公开渠道获得的商业秘密(技术信息、经营信息及其他商业秘密)予以保密。未经该商业秘密的原提供方同意,一方不得向任何第三方泄露该商业秘密的全部或部分内容。但法律、法规另有规定或双方另有约定的除外。保密期限为_________年。

一方违反上述保密义务的,应承担相应的违约责任并赔偿由此造成的损失。

第九条 技术成果收益归属

在履行本合同中,乙方利用甲方提供的技术资料和工作条件完成的新的技术成果,属于乙方所有。(注:当事人还可以有其他不同的约定)

第十条 甲方的违约责任

1.甲方未按照合同约定提供有关技术资料、数据、样品和工作条件,影响工作质量和进度的,应当如数支付报酬。逾期二个月不提供约定的物质技术条件,乙方有权解除合同,甲方应当支付数额为报酬总额_________%的违约金。

2.甲方迟延支付报酬,应当支付数额为报酬总额_________%的违约金,逾期二个月不支付报酬或者违约金的,应当交还工作成果,补交报酬,支付数额为报酬总额_________%的违约金。

3.甲方迟延接受工作成果的,应支付数额为报酬总额_________%的违约金和保管费。逾期二个月不领取工作成果的,乙方有权变卖、处理工作成果,从获得的收益中扣除报酬、违约金和保管费后,剩余部分返还甲方,所获得的收益不足抵偿报酬、违约金和保管费的,有权请求甲方赔偿损失。

共3页,当前第1页123

展开阅读全文

篇16:技术指导进村述职小结_述职报告_网

范文类型:工作总结,汇报报告,适用行业岗位:技术,全文共 1311 字

+ 加入清单

技术指导进村述职小结

局认真贯彻落实《农业机械化促进法》结合部门职能,按照我市XX年“技术指导进村”工作计划。以服务“三农”为宗旨,以促进灾后农业增效、农民增收为中心,以科技创新为动力,大力实施“兴机富民”按照“分类培训、服务产业、注重实效、创新机制”原则,紧紧围绕灾后重建、新农村建设和农机化发展人才需求,进一步解放思想,拓展思路,整合资源,狠抓农业机械实用技术培训和农机科技的宣传普及,将农业机械化相关知识作为农民培训项目的重要内容。通过推广运用先进、适用的农业机械,积极培养农业机械化专业技术人才。通过一年来的工作,技术指导”进村工程取得了一定成效,现总结如下:

一、工作成效

其中培训拖拉机驾驶员人、农机管理人员人,全年共完成农民培训人。农机安全教育培训人、农机法律法规及新技术等各类培训人。培训工作取得了七个方面的实效:一是通过对基层农机管理干部和专业技术人员的培训,使大家认清了形势,看到发展农机化面临的机遇,增强了搞好农机化工作的信心,把握了工作重点、着眼点、着力点及奋斗目标,掌握了农机化管理相关业务知识和农机化新技术,提高了服务农机化工作的本领。二是围绕水稻机械化育插秧、高性能联合收割机、浅旋播种机等农机化新技术的推广,培训了一批新型农机具操作手,使农机操作人员队伍不断壮大。三是通过举办农机化新技术培训和新机具现场演示活动,为农机科技项目实施和各类示范点建设提供了技术支撑。四是通过对农机维修网点从业人员的岗位技能培训及农机服务组织和农机大户经营管理知识、农机作业标准的培训,使农机社会化服务质量明显改善。五是通过开展多种形式的科技宣传和服务活动,使广大农民对农机化促进法等法规和农机购置补贴政策、农机化新技术、新机具有进一步的解,激发了农民购置使用农机具的热情,全市新增农机具台(套)六是通过开展农机职业技能培训,促进了农村劳动力的转移和就业。七是通过对拖拉机手开展相关法律、法规、机械常识和操作技能的培训,使全市拖拉机手的驾驶技术和作业水平有了进一步提高。全市新取得驾驶拖拉机及联合收割机资格证的人员达到270名。

二、主要做法

(一)加强组织领导

由副局长任组长,成立了市农机局农民培训工作领导小组。党组成员任副组长,成员由监理所长、副所长、科教科科长、管理科长建等组成,由农机监理所负责日常工作的组织协调。

(二)落实工作责任。建设新农村。推动地方农机化事业发展的重要抓手。对此,局领导认识十分明确,局把农机培训列为考核各镇(街道办)农机化工作的一项重点内容,年初分解下达了培训任务,全市农机工作会上作了重点安排部署,局领导和主管科室人员经常深入督促检查和指导农机培训工作,协调解决培训问题,切实推行主要领导负总责,分管领导亲自抓,培训机构抓落实的工作责任制,从而保证了农机培训工作的顺利开展。

(三)制定培训方案。切合实际地制定了培训实施方案。把农民培训工作与目标考核挂钩,极大地调动了培训工作人员的工作积极性。全体培训小组工作人员克服种种困难,深入到各镇村进行现场讲解、实地培训。今年共办农机安全培训班期,培训人员人,办农机管理人员培训班期,培训人,办拖拉机驾驶员培训班期,培训人。

共2页,当前第1页12

展开阅读全文

篇17:技术专利权质押担保合同书

范文类型:合同协议,适用行业岗位:技术,全文共 2379 字

+ 加入清单

出质人(全体专利权人):

质权人:

代理人:

一.质押担保方式之一。专利权质押是指债务人或者拥有专利的第三人将其专利权移交全权人占有,以此作为债务的担保,当债务人不能如期履行债务时,债权人有权依法以该专利要求折价或者以拍卖、变卖该专利权的价款优先受偿。其中,债务人或者第三人为出质人,债权人为质权人,用以质押的专利权为质物。

二.出质人与质权人应当订立书面专利权质押合同(以下简称质押合同),并向中国专利局办理出质登记。质押合同自登记之日起生效。

三.当事人向中国专利局提交(寄交或面交)以下文件并按规定缴纳登记费。

(1)质押合同登记申请表。

该表格由中国专利局统一印制。当事人应认真填写,并签名盖章。

(2)主合同和质押合同

主合同是指经济合同,质押合同是主合同的从合同,可以单独订立,也可以是主合同中的担保条款,内容应包括按《专利权合同登记管理暂行办法》中规定的有关条款。

(3)出质人的合法身份证明。

出质人的身份证明材料应与其在专利申请文件中的记载保持一致。如果一项专利有两个以上的共同专利权人,则出质人应为全体专利权人,并出具全体同意出质的书面证明。

出质人为全民所有制单位时,应得到上级主管部门批准:中国单位或个人向境外出质专利权时,须经国务院主管部门批准。办理登记时应出具批准文件。

(4)委托书及代理人的身份证明。

代理人受委托办理登记时,要出具委托书及其身份证明,作为具体承办的联系人应出具本单位的授权委托书及其个人身份证明、企业营业执照副本。

(5)专利权的有效证明

指用作质物的所有专利的专利证书复印件,专利年费收据复印件等其他证明专利有效文件。

(6)专利权出质前的实施及许可情况。

包括实施规模、经济效益、许可次数、许可合同等。

(7)其他有关材料,如公证书、评估材料等。

四.专利权质押合同的主要条款:

(1)前言

当事人签订本合同的主要目的、基本情况。

(2)出质人、质权人及代理人、联系人的姓名(名称)、通讯地址。

联系人系指出质人、质权人自己办理登记具体承办人,代理人系指受出质人、质权人的委托代办登记的人员。地址应确保通讯无误。

(3)被担保的主债权种类

指质押担保的主债权性质及债务基本情况,属于何种法律上的原因产生的债权,如金钱债权、特定物给予债权等,应与主合同保持一致。

(4)专利件数、名称、专利号、申请日、颁证日。

本款要求的内容应与专利证书的记载相同。

若用作质物的专利不止一件,应分别填写清楚。

(5)债务人履行债务的期限

指债务清偿债务的时间,在这期间,当事人依法享有相应的权利和义务。根据《中华人民共和国民法典》,质权与其担保的债权同时存在,但质物(专利权)的有效期可能短于债务期限,所以履行债务的期限应在专利有效时间内,可称为质押期限。据此期限可以明确质权人开始实现质权的时间,以保障当事人的合法权益。

(6)质押担保的范围

可以是以下几种费用的全部或其中几项:主债权及利息、违约金、损害赔偿金、质物保管费用、实现质权(变卖、拍卖或折价等)费用、专利年费、处理专利纠纷费用、转让或许可他人实施时可能产生的违约金、赔偿金、向第三人提存收益所需的保管费等。

(7)质押的金额

指被担保的主债权以金钱来衡量的数量,不属于金钱债权的,应注明债权标的数量和价款,以明确实现质权时就质物优先清偿的债务数额。

(8)质押金支付方式

以已往债务,不需约定支付方式;对因借贷、预付款等形成的未来债务,质押金的支付时间、地点、次数等由当事人约定。

(9)以质押期间进行专利权转让或实施许可的约定

指是否可以转让或许可,若可以转让或许可对相应收益的保管、处置所做的约定等。

(10)质押期间维持专利权有效的约定。

专利年费由谁交纳;

出现专利纠纷时,一般以出质人负责处理为宜,也可由当事人另行约定;

专利权被撤销或被宣告无效时的处理,包括应诉及补救责任由哪方承担,一旦专利权被撤销或宣告无效,各方相应的对策等。质权人有妥善保管质物的义务,但是考虑到专利事务的特点,当事人可慎重约定。

(11)违约及索赔

当事人违反以上约定给另一方造成损失时,对方相应的索赔办法。

(12)争议的解决办法

在合同执行过程中产生争议时,当事人是协商解决或者约定以其他方式解决。

(13)质押期满债务的清偿方式

质押期满,若债务不能得以清偿时,质权人可以与质权人协议以质物折价,也可以依法拍卖、变卖,以所得款项用以清偿债务,但不得约定质物自动移转为质权人所有。

(14)当事人认为需要约定的其他事项

对质押期间质物所值明显减少时,或其他异常情况下如何处理等。

(15)合同签订日期,当事人签名、盖章

五.登记变更

(1)对质押期间的专利著录项目作变更时,当事人应出具书面同意变更的协议和原《专利权质押合同登记通知书》,经质押合同登记管理部门审核批准后,著录项目变更程序才能继续进行。

(2)变更质押合同内容的,当事人应出具书面协议、原登记通知书,填写《专利权质押合同登记变更申请表》,报质押合同登记管理部门审批。

六.需要补正的,当事人应按补正通知书的要求进行补正。

七.对出现下列情况之一的质押合同,将不予登记。

(1)专利权人身份证明于专利文档的记载不符;

(2)专利权存在纠纷或已终止;

(3)质押期限超过专利有效期;

(4)合同约定债务未受清偿时,质物自动归质权人所有;

(5)其它原因。

八.需要办理登记注销的情况:

(1)专利权因故丧失;

(2)主合同无效、导致质押合同无效;

(3)质押期满;

(4)其他原因;

九.质押合同自登记注销之日起失效。

(1)当事人提交原登记通知书、书面协议及其他证明材料;

(2)经专利局审核后,发出《专利权质押合同登记注销通知书》;

(3)质押期限届满后15日内当事人不主动办理注销登记的,该合同登记将被自动注销。登记注销日以届满日为准。

十.期满债务未履行完毕的,当事人可依约或依法处置质物。

出质人(全体专利权人):

质权人:

代理人:

时间:

展开阅读全文

篇18:技术开发合作合同_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 2172 字

+ 加入清单

技术开发合作合同

合同编号:_________

项目名称:_________

甲方:_________

住所:_________

法定代表人:_________

项目联系人:_________

联系方式:_________

通讯地址:_________

电话:_________

传真:_________

电子信箱:_________

乙方:_________

住所:_________

法定代表人:_________

项目联系人:_________

联系方式:_________

通讯地址:_________

电话:_________

传真:_________

电子信箱:_________

丙方:_________

住所:_________

法定代表人:_________

项目联系人:_________

联系方式:_________

通讯地址:_________

电话:_________

传真:_________

电子信箱:_________

本合同合作各方就共同参与研究开发_________项目事项,经过平等协商,在真实、充分地表达各自意愿的基础上,根据《中华人民共和国合同法》的规定,达成如下协议,并由合作各方共同恪守。

第一条 本合同合作研究开发项目的要求如下:

1.技术目标:_________

2.技术内容:_________

3.技术方法和路线:_________

第二条 本合同合作各方在研究开发项目中,分工承担如下工作:

甲方:

1.研究开发内容:_________

2.工作进度:_________

3.研究开发期限:_________

4.研究开发地点:_________

乙方:

1.研究开发内容:

2.工作进度:_________

3.研究开发期限:_________

4.研究开发地点:_________

丙方:

1.研究开发内容:_________

2.工作进度:_________

3.研究开发期限:_________

4.研究开发地点:_________

第三条 为确保本合同的全面履行,合作各方确定,采取以下方式对研究开发工作进行组织管理和协调:_________

第四条 合作各方确定,各自为本合同项目的研究开发工作提供以下技术资料和条件:

甲方:_________

乙方:_________

丙方:_________

本合同履行完毕后,上述技术资料和条件按以下方式处理:_________

第五条 合作各方确定,按如下方式提供或支付本合同项目的研究开发经费及其他投资:

甲方:

1.提供或支付方式:_________

2.支付或折算为技术投资的金额:_________

3.使用方式:_________

乙方:

1.提供或支付方式:_________

2.支付或折算为技术投资的金额:_________

3.使用方式:_________

丙方:

1.提供或支付方式:_________

2.支付或折算为技术投资的金额:_________

3.使用方式:_________

第六条 以提供技术为投资的合作方应保证其所提供技术不侵犯任何第三人的合法权益。如发生第三人指控合作一方或多方因实施该项技术而侵权的,提供技术方应当_________。

第七条 本合同的变更必须由合作各方协商一致,并以书面形式确定。但有下列情形之一的,合作一方或多方可以向其他合作方提出变更合同权利与义务的请求,其他合作方应当在_________日内予以答复;逾期未予答复的,视为同意:

1._________;

2._________;

_________

第八条 未经其他合作方同意,合作一方或多方不得将本合同项目部分或全部研究开发工作转让给第三人承担。但有下列情况之一的,合作一方或多方可以不经其他合作方同意,将本合同项目部分或全部研究开发工作转让给第三人承担:

1._________;

2._________;

_________

合作一方或多方可以转让的具体内容包括:_________

第九条 在本合同履行中,因出现在现有技术水平和条件下难以克服的技术困难,导致研究开发失败或部分失败,并造成合作一方或多方损失的,合作各方约定按以下方式承担风险损失: _________。

1.本合同项目在现有技术水平条件下具有足够的难度;

2.乙方在主观上无过错且经认定研究开发失败为合理的失败。

合作各方确定,本合同项目的技术风险按_________方式认定。认定技术风险的基本内容应当包括技术风险的存在、范围、程度及损失大小等。认定技术风险的基本条件是:

一方发现技术风险存在并有可能致使研究开发失败或部分失败的情形时,应当在_________日内通知其他合作方并采取适当措施减少损失。逾期未通知并未采取适当措施而致使损失扩大的,应当就扩大的损失承担赔偿责任。

第十条 在本合同履行过程中,因作为研究开发标的的技术已经由他人公开(包括以专利权方式公开),合作一方或多方应在_________日内通知其他合作方解除合同。逾期未通知并致使其他合作方产生损失的,其他合作方有权要求予以赔偿。

第十一条 合作各方确定因履行本合同应遵守的保密义务如下:

甲方:

1.保密内容(包括技术信息和经营信息):_________

2.涉密人员范围:_________

3.保密期限:_________

4.泄密责任:_________

乙方:

1.保密内容(包括技术信息和经营信息):_________

共3页,当前第1页123

展开阅读全文

篇19:技术研发与市场营运业务协议

范文类型:合同协议,适用行业岗位:技术,营销,营运,全文共 868 字

+ 加入清单

技术研发与市场营运业务协议

甲方:法定代表人:

乙方:法定代表人:

《根据中华人民共和国民法典》的有关规定,经甲,乙双方友好协商,本着长期平等合作,互利互惠的原则,为实现技术研发与市场营运的直接联,创造良好的经济效益和社会效益,达成以下协议:

一、合作宗旨:

促进科学技术产业化的发展,充分利用甲方广泛的市场资源优势和发挥乙方科研平台能力,实现技术研发与市场营运的直接联盟。

二、合作范围:

1多媒体软件,硬件的开发

2it产品的市场营销

3网络工程

4网络营运

三、合作方式及条件:

1甲方以现有的市场营销网络及社会资源为基础,更进一步的开发市场潜力,逐步形成一个规范化,全国性的营销网络。

2甲方根据社会需求,收集和承接企业应用软,硬件的开发项目。

3乙方利用强大的技术开发力量,开发甲方新承接或者甲,乙双方共同确立的项目。

4乙方应配合甲方做好技术咨询及在开拓业务进程中提供技术支持。

四、权力义务

1属于甲、乙双方共同策划,共同开发的项目,其所有权属于甲,乙双方共同拥有。

2属于乙方单方承接的开发项目,其所有权属于乙方拥有。

3在双方合作过程中,甲,乙双方无权干涉对方企业内部管理。

4双方应以诚信为本,互相交流和切磋业务动作状况,以便互相促进。

五利益分配

1属于双方共同开发的系列产品,由双方协商市场价,按税后利益的%比例分成,此分成比例可每半年调节一次,根据合作情况协商调整。

2属于乙方单方开发的产品,甲方如有兴趣合作,可在双方协商后,另外确定合作方式和分成方式。

六。

共同开发项目的成果归属与分享

1一方转让其有专利权的,另一方可以优先受让其共有的专利权

2合作各方中,单方声明放弃专利申请权的,可由另一方单独申请

3开发项目被授予专利以后,放弃专利申请权的一方可以免费取得该项专利的普通实施许可,该许可不得撤消。

4一方不同意申请专利的,另一方不得单方申请专利

5在特殊情况下,当事人各方还可以在合同中规定对技术成果权的分享份额以及各自享有的专利申请权,将对在技术开发的各主要阶段产生的研究开发成果,约定各自独立享有的权利。

七、保密条款

甲方:

法定代表人:

乙方:

法定代表人:

展开阅读全文

篇20:设备技术合同范文_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 2224 字

+ 加入清单

设备技术合同范文

合同是双方利益的保证,本文为大家准备合同范本,欢迎大家阅读借鉴,希望对大家有帮助。

项 目 名 称:________________________________

委 托 方(甲方)____________________________

研究开发方(乙方)____________________________

填 写 说 明

一、“合同登记编号”的填写方法:

合同登记编号为十四位,左起第一、二位为公历年代号,第三、四位为省、自治区、直辖市编码,第五、六位为地、市编码,第七、八位为合同登记点编号,第九至十四位为合同登记序号,以上编号不足位的补零。各地区编码按gb2260-84规定填写。

二、技术开发合同是指当事人之间就新技术、新工艺和新工艺的新材料及其系统的研究开发所订立的合同。技术开发合同包括委托开发合同的合作开发合同。

三、计划内项目应填写国务院部委、省、自治区、直辖市、计划单列市、地、市(县)级计划,不属于上述计划的项目此栏划(/)表示。

四、标的技术的内容、形式:

包括开发项目应达到的技术经济指标、开发目的、使用范围及效益情况、成果提方式及数量。

提交开发成果可采取下列形式:

1.产品设计、工艺规程、材料配方和其他图纸、论文、报告等技术文件;

2.磁盘、磁带、计算机软件;

3.动物或植物新品种、微生物菌种;

4.样品、样机;

5.成套技术设备。

五、研究开发计划:

包括当事人各方实施开发项目的阶段进度,各个阶段要解决的技术问题,达到的目标和完成的期限等。

六、技术情报资料的保密:

包括当事人各方情报和资料保密义务的内容、期限和泄漏技术秘密应承担的责任。

双方可以约定,不论本合同是否变更、解除、终止,本条款均有效。

七、其他:

合同如果是通过中介机构介绍签订的,应将中介合同作为本合同的附件。如果双方当事人约定定金、财产抵押及担保的,应将给付定金、财产抵押及担保手续的复印件作为本合同的附件。

八、委托代理人签订本合同书时,应出具委托证书。

九、本合同书中,凡是当事人约定认为无需填写的条款,在该条款填写的空白处划(/)表示。

(正文)

依据《中华人民共和国合同法》的规定,合同双方就__________________________________ 项目的技术开发(该项目属____________计划),________经协商一致,签订本合同。

一、标的技术的内容、形式和要求:

二、应达到的技术指标和参数:

三、研究开发计划:

四、研究开发经费、报酬及其支付或结算方式:

(一)研究开发经费是指完成本项研究开发工作所需的成本;报酬是指本项目开发成果的使用费和研究开发人员的科研补贴。

本项目研究开发经费及报酬:________________ 元

其中:甲方提供____元,乙方提供____元。

如开发成本实报实销,双方约定如下:

(二)经费和报酬支付方式及时限(采用以下____种方式)

①一次总付:____________元,时间:________________

②分期支付:____________元,时间:________________

____________元,时间:________________

③按利润________%提成,期限:________________

④按销售额____ %提成,期限:________________

⑤其他方式:

五、利用研究开发经费购置的设备、器材、资料的财产权属:

六、履行的期限、地点和方式:

本合同自____年____月____日至____年____月____日在____________(地点)履行。

本合同的履行方式:

七、技术情报和资料的保密:

八、技术协作和技术指导的内容:

九、风险责任的承担:

在履行本合同的过程中,确因在现有水平和条件下难以克服的技术困难,导致研究开发部分或全部失败所造成的损失,风险责任由________承担。(1、乙方;2、双方;3、双方另行商定)经约定,风险责任甲方承担____ %________________乙方承担____ %

本项目风险责任确认的方式为:

十、技术成果的归属和分享:

(一)专利申请权:

(二)非专利技术成果的使用权、转让权:

十一、验收的标准和方式:

研究开发所完成的成果,达到了本合同第二条所列技术指标,按____标准,采用________方式验收,由________方出具技术项目验收证明。

十二、违约金或者损失赔偿额的计算方法:

违反本合同约定,违约方应当按《中华人民共和国合同法》规定承担违约责任。

(一)违反本合同第____条约定,________方应当承担违约责任,承担方式和违约金额如下:

(二)违反本合同第____条约定,________方应当承担违约责任,承担方式和违约金额如下:

十三、争议的解决方法:

在本合同履行过程发生争议,双方应当协商解决,也可以请求________进行调解。

双方不愿协商、调解解决或者协商、调解不成的,双方商定,采用以下第(____)种方式解决。

1.提交____ 仲裁委员会仲裁;

2.向____ 人民法院起诉。

十四、名词和术语的解释:

十五、本合同有效期限:____年____月____日至____年____月____日

甲方:____________________ 乙方:____________________

代表人:________ 代表人:________

____年____月____日 _____年____月____日

展开阅读全文