面试外贸主管简历怎么写通用20篇

文书主题的表达

1、文书主题是指文书所要阐述的基本观点和﹙B)

A.中心内容 B、 中心思想 C 、主要观点 D、 中心论点

2、文书主题的表达要求不包括﹙D )

A、 正确 B 、务实 C、 集中 D 、分散

3、文书主题通常由﹙A )心思想两方面内容组成

A、 行文目的 B、 行文方式 C、 行文语言 D、 行文结构

4、在标题中表现主题是文书主题的常用表现方式。F

5、一篇文书只能有一个中心思想。T

6、下面关于文书主题特点的表述不正确的是﹙D )

A、酝酿过程短暂 B、大都由行文目的和中心思想构成

C、表现形式直接了当 D、酝酿过程长久

补偿贸易设备进口合同

编号：________________

本合同由下列双方于_______年_______月_______日签订

____________________________________

____________________________________

（以下称卖方）

____________________________________

____________________________________

（以下称买方）

买方向卖方订购下列商品，条件如下：

1、商品的规格：

2、数量：

3、价格：

4、支付条件：

5、包装：

6、_____：

7、交货：

（1）交货时间

（2）目的港

8、单证：

9、检验：

10、技术规格说明：

11、本合同服从后面所附的一般条款。该条款为本合同不可分割的一部分。

一般条款

1、财产权转移

货物的财产权以交货为转移。

2、保证

（a）如果货物发现缺陷，买方必须在到货后三十天内以书面形式通知卖方。

（b）卖方保证货物品质规格符合卖方的规格说明。

3、不可抗力

由于不可抗力及其他超过买卖双方控制能力范围的原因造成不能完成合同义务，买方和卖方均不予负责。

4、赔偿

5、合同的取消

如果卖方没有或不能遵守合同，没有或不能履行义务，买方有下列权利：

（b）买方行使本合同第五条所赋予的权力并不损害或影响其他行动权利和获得由此产生的应得的赔偿金的权利。

6、专利权的侵犯

7、_____

任何时候，双方对本条款或由本条款组成的合同发生任何争议，应由

_________________________________庭并按其_____规则进行_____。_____地点在

____________________________。

8、本合同一式二份，双方各执一份为证。

卖方：买方：

（签字）（签字）

________________________________?________________________________

合同编号：____________________

本协议于_______年_______月_______日在_______签订，协议双方为： 甲方

名称：______________________________________________________________________ 地址：______________________________________________________________________ 乙方

名称：______________________________________________________________________ 地址：______________________________________________________________________

甲乙双方一致同意按下列条款签订本协议。

第一条 定义

1. 产品：本协议中所称“产品”，系指由甲方制造并以其商标销售的 (产品名称)和随时经双方以书面同意的其他商品。

2. 地区：本协议中所称“地区”，系指_______国________。 3. 商标：本协议中所称“商标”系指 (商标全称)。

第二条 委任及法律关系

1. 委任：在协议有效期内，甲方委任乙方作为其代理，以便在“地区”获致“产品”的订单。乙方愿意接受并承担此项委托。

2. 法律关系：本协议给予乙方的权利和权力只限于给予一般代理的权利和权力，本协议不产生其他任何关系，或给予乙方以代表甲方或使甲方受其他任何协议约束的任何权利，特别是，本协议并不构成或委派乙方为甲方的代表，雇员或合伙人。双方明确和理解并同意，在任何情况下，乙方可能遭受的任何损失，不论部分或全部，甲方均不承担责任。

3. 指示：乙方应严格遵守甲方随时发来的指示。由于乙方超越或违背甲方指示而造成的任何索赔、债务和责任，乙方应设法保护甲方利益并赔偿甲方因此而遭受的损失。

第三条 甲方的责任

1. 广告资料：甲方应按实际成本向乙方提供合理数量的“产品”样品、样本、价目表、广告宣传用的小册子及其他有关“产品”推销的辅助资料。

2. 支持推销：甲方应尽力支持乙方开展“产品”的推销;甲方不主动向乙方代理“地区”的其他客户发盘。

3. 转介客户：除本协议另有规定外，如“地区”其他客户直接向甲方询价或定购，甲方应

将该客户转介乙方联系。

4. 价格：甲方提供乙方的“产品”价格资料，应尽可能保持稳定，如有变动应及时通知乙方，以利推销。

5. 优惠条款：甲方提供乙方获致订单的条款是最优惠的。今后如甲方向其他客户销售“产品”而提供比本协议更有利条件时，甲方应立即以书面通知乙方，并向乙方提供比此项更有利的条件。

6. 保证：甲方担保凡根据本协议出售的“产品”如经证实在出售时质量低劣，并经甲方认可，则甲方应予免费修复或者调换的保证，以“产品”在出售后未经变更或者未经不正确使用为限。除上述保证外，甲、乙双方均同意不提供任何其他保证。

第四条 乙方的责任

1. 推销：乙方应积极地促进“产品”的推销，获取订单，并保持一个有相当规模和足够能力的推销机构，以利“产品”在“地区”的业务顺利开展和壮大。

2. 禁止竞争：乙方除得到甲方书面同意外，不应制造、购买、获取订单，或协助推销与本协议“产品”相同或者类似的其他国家商品，或者将本协议内“产品”转销其他国家或者地区。

3. 最低销售额：在本协议有效期内的第一个12个月内，乙方从“地区”客户获得的“产品”订单，总金额应不少于________元。以后每12个月递增50%。

4. 费用：在本协议有效期内，乙方应承担在“地区”推销和获取“产品”订单的全部费用，如电报费、旅费和其他费用，本协议另有规定者除外。

5. “产品”价格与条件：乙方保证按照甲方在本协议有效期内随时规定的价格和条件进行推销。在获取订单时，乙方应充分告知客户，甲方的销售确认书或合同内的一般条款以及任何订单均须甲方确认接受后方为有效。乙方收到的“产品”订单，应立即转给甲方以便予以确认或者拒绝。

6. 督促履约：乙方应督促客户严格按照销售确认书或合同的各项条款履约，例如及时开立信用证等。

7. 市场情况报道：乙方应负责每月(或者每季)向甲方提供书面的有关“产品”的市场报道，包括市场上同类产品的销售情况、价格、包装、推销方式、广告资料、客户的反应和意见等。如市场情况发生重大变化时，乙方应及时以电报通知甲方。

第五条 佣金

1. 佣金率及支付方式：凡经乙方获得并经甲方确认的订单，甲方在收妥每笔交易全部货款后，将按发票净售价_______%付给乙方佣金。为了结算方便，佣金每月(季)汇付一次。

2. 计算基础：上述“发票净售价”系指甲方开出的“产品”发票上的总金额(或毛售价)减去下列费用后的金额，但以这些费用业经包括在毛售价之内者为限： (1) 关税及货物税; (2) 包装、运费和保险费; (3) 商业折扣和数量折扣; (4) 退货的货款; (5) 延期付款利息; (6) 乙方佣金。

3. 甲方直接成交的业务：凡乙方“地区”的客户，虽已了解甲、乙双方的贸易关系，或者经甲方转介与乙方，但仍坚持与甲方直接交易，则甲方有权与之成交，保留______%佣金予乙方，并将此项交易作为本协议第四条第3款最低销售额的一部分。

如乙方“地区”的客户在中国访问期间(包括参加在中国举办的各种交易会)与甲方达成“产品”的交易，目的港为乙方代理“地区”者，甲方有权接受其订单，且不为乙方保留佣金，亦不计入上述最低销售额。

4. 超额佣金：如乙方在本协议有效期内积极推销“产品“，并超额完成年度最低销售额(按实际出运金额计算)，甲方对超额部分除支付规定的佣金外，应另付乙方奖励佣金： (1) 超额50%时，奖励佣金为_____%;

(2) 超额100%时，奖励佣金为______%。奖励佣金在年度终了时由甲方结算后一次汇

付给乙方。

第六条 协议有效期

本协议有效期为_______年，期满自动失效。如双方同意延续本协议，任何一方应在期满_______天前用书面通知对方以便相互书面确认。

第七条 协议的终止

1. 终止：协议双方应认真负责地执行各项条款。在下列情况下，任何一方得以书面通知另一方立即终止本协议或者取消其中某一部分：

(1) 如一方未能履行本协议的任何一项义务，而此项违约在接到另一方书面要求纠正的

通知后_______天内仍未能加以纠正;

(2) 如一方自动或被迫申请宣告破产，自动或者被迫申请改组、清理、解散; (3) 如发生违反本协议第八条有关商标使用或者注册的情况;

(4) 如发生本协议第九条不可抗力事由，一方在超过______天期限后仍无法履行其义务

时。

2. 终止的影响：本协议的终止并不解除双方按照本协议规定业已产生但未了结的任何债务。凡在本协议终止前由于一方违约致使另一方遭受的损失，另一方仍有权提出索赔。

第八条 商标

甲方目前拥有和使用的商标、图案及其他标记，均属甲方产权，未经甲方特别以书面同意，乙方均不得直接地或间接地、全部或者部分地使用或注册。即便甲方特别以书面同意乙方按某种方式使用，但在本协议期满或者终止时，此种使用应随即停止并取消。

第九条 由于水灾、火灾、地震、政府禁令等不可抗力事件致使任何一方不能履行或不能完全履行本协议的义务和责任时，遭受不可抗力的一方必须在事故发生_______天内书面通知另一方，说明不能履行合同的全部义务或部分义务或需要延期履行合同的理由，并提供有关证明文件，根据情况得以全部或部分免除责任或延期履行。

第十条 争议的解决

双方当事人在履行本合同过程中发生争议时，应当协商解决;协商不能解决的由鞍山仲裁委员会仲裁。

第十一条 转让

本协议任何一方未经征得另一方书面同意之前，不得将本协议规定的任何权利义务转让给第三者。任何转让，未经另一方书面明确同意，均属无效。

第十二条 协议生效及其他

本协议自双方签字之日起立即生效。本协议如有未尽事宜须补充或者修改时，应以书面提出并经双方正式授权的代表签署后方能生效。

本协议及附件以中文、_______两国文字缮就，共有正本____份，副本____份，签署后双方各执正副本各_____份，均具有同等法律效力。

本协议不适用双方政府之间的贸易或者甲方与乙方政府之间达成的交易，亦不适用于易货贸易或者投标交易。

甲方：_________________________________(公章) 法定代表人：___________________________(签字) (或授权委托人)

________年_____月_____日 乙方：_________________________________(公章)

法定代表人：___________________________(签字) (或授权委托人)

________年_____月_____日

大家下午好!

我是来自上海交通大学市场营销专业的。我喜欢读书看报，因为它能丰富我的知识;我喜欢跑步，因为它可以磨砺我的意志，我到底是个什么样的人呢?我是一个活泼开朗、热情、执着、有坚强意志的人。既然今天竞聘的是营销经理一职，我想谈谈自己对营销的理解。营销不等同于推销，但推销是营销的重要组成部分。要想做好营销工作，首先就要做好自我推销。让一个陌生人信任自己是有一定难度的，但只有客户相信可以，才会相信自己的产品，才能更好的将产品推入市场。我想“做人，做事，做生意”大概就是这个意思吧!我觉得作为一名营销经理，除了应该具备一定的营销知识外，还应具有良好的沟通、协调能力，能够吃苦耐劳，具有良好的团队合作精神，讲究职业道德。身为班长的我，在三年的时间里，组织了班级各种各样的活动。通过组织这些活动，提高了自己的组织协调能力，加强了团队合作意识。同时也让我充分认识到，个人的能力毕竟很有限，只有通过团队合作，集思广益，取长补短，才能更好的完成工作。如果这次我有幸竞聘上营销经理，我想打造一个平台，让自己的同事在一种轻松却不失严谨的氛围中工作，大家相互合作，具有良好的团队精神。同时我认为，营销也是一种服务。既然是一种服务，就应该做到让大家满意，用热情和真心去做。激情，工作中不可或缺的要素，是推动我们在工作中不断创新，全身心投入工作的动力。激情加上挑战自我的意识，我相信我能胜任这份工作。“诚信是我们合作的基础，双赢是我们共同的目标!”我愿与文化一起发展，一起创造辉煌的历史。

代理进口合同

委托代理进口协议的签订意味着授权于人，下面是由中国人才网整理的代理进口合同，欢迎阅读!

代理进口合同一

合同编号：

签约日期：

签约地点：

委托人：(以下称“甲方”)

住址：

法定代表人：电话：传真：邮编：电子信箱：

受托人：(以下称“乙方”)

住址

法定代表人：

电话：传真：邮编：电子信箱：

甲、乙双方经友好协商，就甲方委托乙方代理进口本合同项下货物一事达成一致，兹同意按照下述条款签订本合同：

甲方委托乙方代理进口下述货物(以下称“货物”)：

货物名称规格数量品牌/商标其它

二、委托项目：

1、甲方委托乙方以乙方名义与(以下称“外商”)签订进口合同(以下称“进口合同”)，向其购买上述货物。

2、乙方向外商购买上述全部货物的总价为(不含税款及代理费)。

3、进口合同中对货物的质量要求应为：

技术标准(标准制订人、标准名称、标准代号/编号等)：

特别约定：

三、乙方义务：

1、根据本合同的有关规定，以自己的名义与外商签订进口合同。

2、按照进口合同的规定，办理货物在中国境外的运输、保险事宜。

3、办理货物的进口报关、对外付汇手续。

4、按照本合同第六条的规定向甲方交付货物。

5、本合同规定的其它义务。

四、甲方义务：

1、按照本合同第五条的规定，及时将购买货物所需全部资金、相关税费及代理费付至甲方帐户。

2、按照本合同第六条的规定，及时提取货物。

3、应乙方要求，参加由乙方组织的有关货物技术标准、质量要求等方面的对外谈判及有关活动;必要时，负责编制合同附件。

4、检验货物并及时对货物质量问题提出异议。

5、本合同规定的其它义务。

五、付款条件：

1、甲方应于前凭乙方书面通知，将进口合同所规定的全部货款汇入乙方帐户;甲方支付人民币的，折算汇率为：。

2、甲方应于前，凭乙方书面通知及海关出具的有关单据，将因进口货物而应向海关缴纳的税款汇入乙方帐户。

3、甲方应于前，向乙方支付代理费，代理费金额为本合同第二条所规定的进口合同总价的%。

六、货物交付：

1、货物进口批文由方负责办理。

2、乙方应于货物预计到达中国口岸前日内，书面通知甲方有关情况;并于货物到达中国口岸后立即通知甲方。

3、甲方应在乙方发出到货通知后日内赴交货地点收货。

4、货物在中国境内的法定商检由方负责，费用由方承担。

5、乙方应在将货物交给甲方，货物自进关口岸至的运输及保险由方负责，费用由方承担。

七、对外索赔：

如外商在履行进口合同时有违约行为，甲方决定向外商提起仲裁或诉讼的，应当书面通知乙方并提供所需费用及协助，由此而产生的损失或利益由甲方承担或享有。如甲方未及时书面通知乙方并提供所需费用及协助，乙方无义务对外商提起任何仲裁或诉讼。

八、违约责任：

、如甲方未按照本合同第五条的规定及时支付有关款项，应向乙方支付滞纳金，金额为逾期支付部分的万分之五/每天;逾期超过十五天的，乙方有权解除本合同并要求甲方赔偿因此而遭受的一切损失。

在甲方按照本合同第五条的规定支付全部款项前，乙方有权留置全部货物。

2、如甲方未能按照本合同第六条的规定及时提取货物，应承担延迟提货期间发生的货物仓储费及其它费用;逾期超过十五天不提货的，乙方有权解除合同并处置未提取货物。

九、争议处理：

凡因执行本合同发生纠纷的，双方应协商解决;协商不成的，任何一方均可向人民法院提起诉讼。

十、其它：

1、本合同自甲、乙双方代表人签字并盖章之日起生效。

2、本合同一式二份，甲、乙双方各执一份，效力均等。

3、本合同未明确规定的事项，按照《中华人民共和国合同法》及《关于对外贸易代理制的暂行规定》(对外经济贸易部1991年8月29日发布)的规定执行。

十一、特约条款(如本合同其它条款与本款的规定发生冲突，以本条的规定为准)：

委托人：

代表人签字：

盖章：

受托人：

代表人签字：

盖章：

代理进口合同二

委托人：(以下简称甲方)

法定代表人：

地址：邮编：

电话：传真：

代理人：(以下简称乙方)

法定代表人：

地址：邮编：

电话：传真：

甲、乙双方经友好协商，就进口项目事宜,根据国家现行的法律、法规和政策之规定，于年月日在北京签订协议条款如下，以资信守。

一、甲方委托乙方作为其进口项目的代理人，乙方接受甲方委托，代理甲方对外签订和执行该项目进口合同。

二、甲方委托乙方代理进口项目。详细情况如下：

卖方：

地址：

电话：传真：

商品名称及规格：

单价：

数量：

总价：

价格条款：

付款方式及付款时间：

交货时间及运输方式：

制造商及原产地：

[如上述情况不足以详尽说明，可设附件]

三、甲方义务：

1.负责按规定办理

□进口证明，□进口登记表，□免税证明，□进口许可证，□进口所需的卫生或食品部门的有关文件，□。

2.甲方对外所做的承诺或约定必须符合国家现行的法律、法规和政策的规定，并承担有关责任。同时，负责确保所进商品和商品进价的真实性。如因甲方原因造成到货通关时发生问题，其责任和直接损失，以及乙方按甲方委托要求履行合同过程中所产生的风险和损失都由甲方承担。

3.本协议签订后，甲方于年月日将货款总额的%计人民币元给付乙方，支付方式为。

4.甲方须在货到港前个工作日内，将进口税款(关税、增值税)和乙方进口代理手续费(为合同金额的%)等款项给付乙方。如因款项未到，而造成滞报金、滞纳金及仓储费等一切费用，由甲方承担;如货到15天后，甲方仍未支付上述款项，乙方有权对所到货物行使留置权。

5.通关提货后，

□货存乙方仓库内。甲方提货时需按商品进价向乙方支付相应货款，直至向乙方付清合同全部货款为止。甲方未付清全部货款前，货物所有权属乙方。到货超过个月，如甲方仍未付清货款，乙方有权单方面处置货物。

□到货确须运至甲方处的，甲方须在本协议签订前，向乙方提供银行保函[或向乙方办理有关资产/有价证券的抵押/质押手续，或向乙方提供乙方所接受的企业的担保]。远期信用证到期承付前个工作日内，甲方向乙方付清应付未付的货款(货款总额的%)计人民币元和银行费用计人民币元。如甲方逾期未付或拒绝支付上述款项，乙方有权向出具保函的银行追索所欠款项[或按法律程序处置抵押物/质押物，或向担保企业追索所欠款项]。

[6.所进商品为法检商品，甲方负责办理有关手续。]

四、乙方义务：

1.乙方负责按规定办理：□进口证明，□进口登记表，□进口许可证等进口批文。

2.乙方负责按本协议“二、”款内容对外签约，确保合同内容的真实性和合法性。

3.乙方负责按合同要求对外开立信用证。

4.乙方负责办理购付汇和核销手续，汇率为付款当日银行卖出价。

5.乙方负责按规定自理报关或委托经海关批准注册的报关行报关;如海关验货，乙方应在海关验货前日内及时通知甲方。

6.乙方负责按实际支出与甲方结算(多退少补)，并向甲方开具结算单据。

五、在合同规定的索赔期内，如发现数量和质量问题，由甲方请有关部门出具商检证明并及时与乙方联系，由乙方对外提出索赔。甲乙双方须积极配合。国外供货商或保险公司赔付后，乙方立即将赔付金额拨付甲方。

六、[对于甲方对外协商确定的、且须对外预付%货款的合同，甲方应对外方资信情况负责，并承担乙方按合同规定对外预付货款的风险。]

七、乙方依据本协议对外签订进口合同后，甲方不得要求乙方更改进口合同内容，除非要求更改的部分并不增加乙方风险，且乙方和国外供货商都同意。如因甲方拒绝履行本协议项下的义务，而导致乙方不能履行对外的进口合同，由此而产生的一切损失由甲方全部承担。

八、如甲、乙双方任何一方单方违约，违约方应向守约方偿付协议进口总额%的违约金。如违约方给守约方造成的损失超过违约金数额的，违约方应就其不足部分对守约方进行赔偿。

甲乙双方在此特别约定，如果甲方违反本协议中其对乙方支付义务的任何规定，则甲方就其逾期未付金额，每逾期一日，应向乙方支付相当于该等逾期未付金额万分之x(0.0x%)的违约金。

九、甲乙双方同意，在执行本代理协议过程中所发生的一切争议首先通过友好协商解决，协商不成的，任何一方均可诉诸人民法院解决，本代理协议的管辖法院是乙方所在地人民法院。

十、本协议未尽事宜，甲乙双方应根据国家有关规定另行协商并签补充协议。补充协议为本协议不可分割的组成部分。

十一、本协议一式二份，甲已双方各执一份。

十二、本协议自双方签字盖章之日起生效。

甲方(盖章)：乙方(盖章)：

授权代表签字授权代表签字

关于项目经理施工的合同范本

甲方：有限责任公司

乙方：

为了全面履行施工合同，加强对工程项目的管理，提高企业经济效益，双方本着公开、公平、平等、自愿、诚实信用的原则，达成如下协议：

一、甲方的职责和权限

1、甲方的职责

(1)负责组织施工合同“交底”和施工组织方案的审定以及建设单位、地方社会环境资源的联系衔接;

(2)负责项目运转所需资金的筹措及其他风险控制;

(3)协助乙方组织竣工验收、竣工决算和评优申报;

(4)负责组织项目管理期间和终结时的考核审计;兑现项目承包人经济收益(包括薪金)或实施经济赔偿处罚;

(5)协助乙方选聘项目管理人员，组建项目经理部，配置其他生产要素;

(6)根据项目需求及乙方请求对外签订劳务分包合同、材料设备购置合同、机械材料租赁合同等。

2、甲方的权限

(1)有权对乙方的施工管理工作进行指导、检查、监督、协调;

(2)除建设单位指定外，有权将项目的安装和装饰装修工程分包给集团公司所属专业公司;

(3)乙方违法、不执行国家标准不按规范进行管理施工、违反集团承包管理办法的情况下，甲方有权进行纠正，责令停工整改、予以经济处罚、终止承包合同、调整承包人。

二、乙方的职责和权限

1、乙方的职责

(1)代表企业实施项目管理，遵守国家法律法规，执行强制性标准，执行企业相关管理制度，积极维护企业合法权益;对所施工的项目自开工准备至竣工验收，实施全过程、全面管理;

(2)根据国家规范组织编制项目管理实施计划;

(3)组织实施施工现场的生产要素的配置和管理;

(4)组织制定和实施项目经理部各项管理制度;

(5)在企业授权范围内负责与建设单位、监理单位、地方政府相关部门、企业管理层的工作联系和协调，负责劳务分包、协作单位的管理;

(6)解决施工现场和项目经理部出现的问题，发现和处理突发事件;

(7)负责竣工验收和竣工结算，提供和准备相关技术经济资料;

(8)协助企业进行项目的检查、鉴定和评优、评奖申报;

(9)负责员工的管理教育、企业文化和精神文明建设;

(10)接受上级和地方建设行政主管部门的检查监督，认真落实整改意见，提高管理水平;接受本企业的检查监督和考核审计;

(11)处理项目经理部善后工作和工程质量保修服务，完成清收工程款等债权债务的清理和移交;

(12)按照甲方的要求报送完成各种指标的情况;

(13)按分公司规定及时足额交纳职工的各种保险及住房公积金等费用。

2、乙方的权限

(1)代表甲方实施项目管理，全面履约施工合同，遵守国家法律法规，执行强制性标准、规范和甲方相关管理制度;

(2)根据甲方的授权，组建项目经理部，主持项目经理部全面工作;

(3)确定项目经理部组织架构，选择聘用管理人员和生产工人，少数关键岗位的管理人员按规定程序可外聘;确定管理人员职责、权限，并组织考核奖惩;

(4)有权在甲方确定的合格分承包方名单中选择劳务队伍，但必须报发包方备案;

(5)甲方授权的范围内自行组织物资采购;

(6)按照集团公司资金管理办法，决定其项目资金的使用;

(7)按照以收定支、效率优先的原则决定项目经理部人员薪酬分配(参照局对项目薪酬分配管理办法)

(8)根据企业授权，协调处理与项目有关的内外部事项，重点跟踪后续工程项目和参与其他项目的经营活动。

三、合同纠纷的解决方式

1、双方在履行承包合同产生纠纷时，首先应协商解决;

2、双方协商解决不成时，依据集团公司工程项目责任承包管理办法，进行调解;

四、合同的成立与生效

1、本合同自甲乙双方签章之日起成立、生效;

五、其他

1、本合同的附件是合同的组成部分，与本合同具有同等效力;

2、本合同未尽事宜，双方另行协商，所订协议与本合同具有同等效力;

3、本合同一式四份，双方各执二份。

甲方： 乙方：

法定代表人： 法定代表人：

日期： 日期：

时光飞逝，不知不觉已经在大学生活和学习了3年，这3年也是我人生的一大转折点，我于20xx年以优异的成绩考入XX职业技术学院。4年的校园生活，使我自身的综合素质、修养、为人处事能力以及交际能力等都有了质的飞跃;让我懂得了除学习以外的个人处事能力的重要性和交际能力的必要性。大学生活与社会生活是相互映射，所以大学阶段的个人综合素质与 能力的培养、提高;才是我们作为当代大学生的主题。

除此之外，课余时间我经常利用网络带来的便利，关注最新科学技术动态;尤其是有关本专业的知识。使自己始终紧跟世界最新发展潮流和时代的步伐。因此我学习熟练掌握Windows、Office等软件的操作和安装系统，熟悉网页设计;一直以“一专多能，全面发展”来严格要求自己，勤奋拼搏、刻苦好学。踏实并系统地学习所开的课程知识，并取得了优异成绩。

在校期间，我虚心求学、刻苦认真、吃苦耐劳，工作兢兢业业，及时总结;注重理论联系实际，培养自己的自学能力以及分析、解决问题的能力。在丰富多彩的大学生活中，为了扩大知识面和培养自己的业余爱好;积极参加校内外的实践活动，重视团队合作精神;作为系学生会干部的我，有较强的组织、宣传、管理和应变能力;有高度的责任心和良好的人际关系。在出色地完成上级交予的任务外，还在校内组织和开展一些有意义的活动中，能有力地组织同学及调动同学们的积极性;从中也锻炼和提高了自己的组织和领导能力。表现出较强的与人密切合作的能力和良好 的环境适应能力;并且深受同学们和老师以及领导的认可。

在日常生活中以积极的态度和与同学们的相处极为融洽，受到同学们的欢迎;同时自身的交际能力随之增强，作为一名有志青年，我坚决拥护中国共产党的领导;坚 持四项基本原则。认真学习马列主义、毛泽东思想、邓小平理论和全面贯彻“三个代表”的重要思想，并且已向党组织靠拢。

4年的学习生涯是我人生路上的一小段，并且通过系统化、理论化的学习;学到了很多的知识，更重要的是如何以较快速度掌握一种新事物的能力，思想成熟了很多，性格更坚毅了。如今我有信心接受任何新的挑战和考验。

各位考官好：

我是__医学院临床医学系的一名即将毕业的本科生，在贵医院招贤纳粹之际，鉴于扎实医学基础知识、熟练的操作技术、出色的社会工作能力及较强的自学提高能力，我有信心自己能够很快胜任临床相关工作。

四年大学的临床理论学习形成了我严谨的学习态度、严密的思维方式，培养了良好的学习习惯，一年的临床实习工作经历更提高了我分析问题解决问题的能力。

尤其是在实习过程中实习医院给我提供了许多动手实践机会，使我对临床各科室的常见病能够做出正确的诊断和的处理。

强烈的责任感、浓厚的学习兴趣，动手能力强、接受能力快，并且能够出色的完成各项工作任务，使我赢得了上级医师的一致好评，更使我信心百倍，成为我今后工作生活中的知本。

丰富的社会工作经验不仅开阔了我的视野，更形成了我沉稳果断、热忱高效的工作作风。在小学、初中、高中，一直到大学各阶段中，我曾任班长，学习委员等，成功地组织了无数次班集体校内外活动，工作得到同学的认可与老师的好评，我所在的班级多次被评为优秀班集体，本人也多次赢得了优秀共青团员工作积极分子等荣誉称号。

我相信有了这些工作经历，我一定能够协调各种关系、处理好日常工作中遇到的问题。

本协议各方当事人

甲方（委托方）：______________ 合同编号：__________________

法定代表人：__________________ 签订地址：__________________

乙方（代理方）：______________ 签订日期：____年____月____日

法定代表人：__________________

按照《民法典》的有关规定，甲乙双方本着互惠互利的原则和相互合作与支持的宗旨，就甲方委托乙方为进口货物运输代理等事宜，经友好协商达成如下协议。

一、甲方责任和义务

1.甲方最少在货物抵达前（船到港前三天、航班到港前24小时）通知乙方货物到达情况和提供有关文件，包括：海洋提单、空运提单、货物资料、报关和报检报验文件等，以便乙方安排换单和提前审核有关文件。

2.甲方委托乙方代理申报的进口货物，必须按照中华人民共和国海关、商品检验检验以及相关部门对于国家进口货物的有关规定，如实申报。

二、乙方责任和义务

1.乙方应及时、合理安排甲方所委托进口货物的的换单、申报、运输等事宜。

2.乙方应及时通知甲方有关报关进度、预计送货时间，以便甲方合理安排仓库装卸。

3.乙方应积极协助甲方解决在报关过程中出现的各种问题和状况，包括文件的提供、解释、说明等工作。

4.乙方应以最快的速度完成清关工作，并按甲方的指示将货物送到指定地点。

三、乙方的免责

1.由于甲方或下列原因导致货物申报时间的延迟，而造成未能及时清关或货物疏港等，由甲方承担所产生的风险、责任及费用，而乙方不予承担：

（1）因买卖双方原因导致提单不能在船公司正常换取（如未电放、海运费用未结清等）；

（2）由于甲方未能及时提供进口报关所需的全部资料；

（3）因甲方所提供的报关资料失实，而导致的延迟；

（4）在清关过程中由于海关等相关部门要求，需要补充或修改有关单证及相关说明资料，而甲方未能及时提供；

（5）遇到法定节假日或有关部门不能正常办公；

（6）因港口要求和规定而必须输港的货物；

（7）其它甲方及不可抗拒原因。

2.由于非乙方原因造成滞箱费、污箱费、修箱费等费用和责任，由甲方承担，乙方尽量协助甲方协商解决。

四、费用结算

1.按照海关的有关规定，甲方应自行向海关缴付货物进口关税及增值税，特殊情况可以委托乙方代缴，但乙方不予以垫付。

2.甲方应自行交付到付运费（海运费和THC、空运费），特殊情况可以委托乙方代付，但乙方不予以垫付。

3.非乙方原因产生的特殊费用和责任，乙方不予以承担。

4.乙方在货物完成清关、运输后_____天内传单票应收费用明细给甲方，甲方应及时确认并回传。

5.结算方式：经甲乙双方协定，甲方应在送货后_____天内将所有费用支付给乙方，有关税单、报关单等文件按先付款，后退单的方式办理。

6.如因各种原因乙方无法收到甲方应付之费用，则乙方有权暂扣甲方委托乙方所管理的货物或属于甲方的业务文件，所造成的风险、责任及费用，乙方不予承担。

7.附《进口货物运输费用报价》

五、纠纷的解决

本协议项下所产生的任何纠纷或争议，双方应本着友好协商、互惠互利的原则协商解决，如协商不成，双方同意提交管辖地海事法院审理。

六、 通知

1.甲乙双方银行账户、所在地址、电话及电子邮箱发生变更，应及时以书面形式通知对方；否则，由未通知方承担由此而引起的相关责任。

2.本协议要求或允许的通知或通讯，不论以何种方式传递均自被通知一方实际收到时生效。

3.前款中的“实际收到”是指通知或通讯内容到达被通讯人(在本协议中列明的住所)的法定地址。采用数据电文形式通知或通讯的，是指该数据电文进入被通讯人的收件系统。

七、保密

一方对因履行本协议而获知的另一方的商业机密负有保密义务，不得向有关其他第三方泄露，且该义务不受本协议履行终止或解除的限制。但中国现行法律、法规另有规定的或经另一方书面同意的除外。

八、违约责任

除本协议规定的免责事由外，当事人一方如不履行本协议义务或履行本协议义务不符合约定而给对方造成损失的，应对损失进行赔偿（包括各种因之产生的费用、开支、额外责任，以及合同履行后所可以获得的直接利益）；但遭受损失方必须提供相关损失的证明，且不得超过违约方订立合同时预见到或应当预见到的因违约行为所可能造成的损失。

九、不可抗力

任何一方因有不可抗力致使全部或部分不能履行本协议或迟延履行本协议，应自不可抗力事件发生之日起三日内，将事件情况以书面形式通知另一方，并自事件发生之日起三十日内，向另一方提交导致其全部或部分不能履行或迟延履行的证明。

经书面通知之后，本协议内受影响之条款可在不能履行期间及受影响之范围内中止履行。但任何一方迟延履行后发生不可抗力的，不能免除其责任。

十、补充与变更

本协议可根据各方意见进行书面修改或补充，由此形成的补充协议，与协议具有相同法律效力。

十一、附则

本合同一式两份，双方各执一份，自双方签字盖章之日起生效，有效期一年。期满前一个月内双方不提出异议，视为合同自动顺延。即使本协议终止后，双方均不能免除在本协议有效期内的经营活动中所产生的经济与法律责任。

甲方（盖章）：____________________ 乙方（盖章）：____________________

授权代理人：（签字）______________ 授权代理人：（签字）______________

单位地址：________________________ 单位地址：________________________

邮政编码：________________________ 邮政编码：________________________

联系电话：________________________ 联系电话：________________________

传真：____________________________ 传真：____________________________

电子信箱：________________________ 电子信箱：________________________

开户银行：________________________ 开户银行：________________________

账号：____________________________ 账号：____________________________

尊敬的各位面试官：

你们好!

我叫某某某，毕业于某某某卫校，专业学习护理。非常荣幸有机会站在这里进行应聘自我介绍。

虽然我的学习成绩不是非常好，但我却在学习的过程中收获了很多。首先是我端正了学习态度。在我考进卫校时，本来想解放一下自己的，但是很快我就明白了，卫校的学习是更需要努力认真的。看到周围的同学们拼命的学习，开始了卫校的学习旅程，觉得自己落后了。卫校的学习不象初中那样是填鸭式的，而是老师把课讲完，然后自己去看，去理解。这个时候自习能力和自制能力是很重要的。长期自习以来我知道了要想学好只埋头苦学是不行的，要学会“方法”，做事情的方法。古人云：“授之以鱼不如授之以渔”我来这里的目的就是要学会“渔”，做什么都勤于思考，遇到不懂的地方能勤于请教。在学习时，以“独立思考”作为自己的座右铭，时刻不忘警戒。在学习知识这段时间里，我更与老师建立了浓厚的师生情谊。老师们的谆谆教导，使我体会了学习的乐趣。我与身边许多同学，也建立了良好的学习关系，互帮互助，克服难关。

学习护理单有理论是不行的，还要有良好的护理技术。所以在上实践课的时候我都会争取机会多操作几次，加上卫校本来就少学生可给学生用的空间可不少。所以我可以再趁放学时间多练习一下。

在卫校的第三年是我们到医院实习的时间，基本上一年都是待在医院里学习。再这里我熟练我的护理操作技术，把理论和实践结合在一起，在带教老师的指导下用我全副的耐心和爱心护理病人，使病人得到良好的照顾，早日康复。到医院实习认识到许多也是学习护理的同学，也就增加了与其他同学交流和向其学习的机会，锻炼了自己的交际能力，学到别人的长处，认清自己的短处。所以我喜欢实习。虽然有时会感到累些，但乐此不彼。

我个人认为自己最大的缺点就是喜欢一心两用甚至多用。急功近利，喜欢一口气学许多东西，但是贪多嚼不烂，即使最后都能学会，也已经搞得自己很疲劳。如今想想，这样其实并不好，正所谓，贵在精而不在广。如果我一段时期内专注于一种学问，不求博但求精，相信一定能更深刻的理解并掌握这门知识。自从我发现自己有这个缺点和问题后，我常常警戒自己，步入社会后也不能一心两用。

通过三年的卫校生活，我学到了很多知识，更重要的是掌握了护理操作技术。思想变成熟了许多，性格更坚毅了。认识了许多同学和老师，建立起友谊，并在与他们的交往中提升了自身素质，认清了自身的一些短处并尽力改正。

我的自我介绍完毕，谢谢!

合同编号：__________________

签订时间：__________________

签订地点：__________________

甲方：______________________

乙方：______________________

甲乙双方本着平等互利、友好协作的原则，经协商，就甲方与乙方联合经营出口业务达成如下协议：

一、甲方责任

1.甲方与乙方联合经营出口________产品，具体品名、规格、数量及价格等以出口合同为准。

2.协助乙方对外索赔，由此产生的费用由乙方承担。

3.提供本协议每一票出口货物所需出口相关单证。

4.负责向银行办理交单议付手续和收结汇。甲方在收到结汇水单、出口核销单、报关单及乙方提供的增值税发票(经国税局认定为真实有效的增值税发票)后三个工作日内，按结算比率(详见结算表)将款项(扣除银行和甲方代垫费用)付至乙方工厂;如汇率变化，按新汇率执行。若外汇货款到帐发生在每月的1—10日期间，则货款先按1美元：____元人民币付给乙方，余款延至每月10日后付给乙方。

5.负责办理外汇核销手续。

二、乙方责任

2.乙方对货物的质量、数量、包装、交货期负责，因货物质量、数量、包装、交货期以及不可抗力等原因造成的损失由乙方承担。

3.负责联系境外客户，通知境外客户将外汇货款支付到甲方指定的银行帐户，或开立以甲方为受益人的即期不可撤消信用证。所有因外商索赔，外商违约或者其他原因造成本协议外销合同未能履行、延迟履行、部分履行或履行不符合约定条件，使甲方未能按时收汇核销或无法收汇核销，乙方承担由此产生的一切经济损失和法律责任。

4.乙方异地自理报关的，应接受甲方监督管理，并提前5天将出货计划和需要领取的单证传真给甲方。所领取的单证应在30天内归还甲方，乙方应保证合法、安全地使用甲方提供的单证，如发生单证丢失、使用不当和延误等情况，所引起的一切后果和经济损失由乙方承担

5.乙方应遵守国家法律、法规和各项规定，乙方对甲方在授权范围内依本协议所做的

一切行为承担法律责任。若乙方在执行本协议过程中因假冒_____、假冒产地或_____侵权等违法_____导致甲方经济和声誉损失，乙方负全部责任。

6.乙方必须在报关出口后60天内提供与本协议项下每批货物的出口报关单相符的，由供货工厂开具的增值税发票，承担增值税发票不合法、不准确、不正确而导致甲方无法退税或造成骗税行为的经济损失和法律责任。如乙方提供的增值税发票、关单、核销单系伪造或有其他与税务局等国家管理机关要求不符之处，甲方有权拒付相当于应退税款的余款。

7、乙方应督促境外客户按时付汇，保证甲方能在报关出口后3个月内收回外汇。若无法按时收汇核销而导致无法退税的，乙方应承担由此产生的一切经济损失和法律责任。

8.若由于乙方原因导致无法退税的，乙方仍需安排外汇到帐，且必须开具普通商业发票给甲方，同时甲方向乙方收取出口报关金额1%的手续费;若乙方无法安排外汇到帐或无法开具普通商业发票给甲方，由此产生的一切经济损失和法律责任均由乙方承担。

三、货款结算：

1.甲方应付乙方货款以净收汇按以下结算比价表计算：

出口退税率____结算及开票比价(美元:人民币)____%

2.乙方应按开票比价足额开具增值税发票，开票不足的应退税款由乙方承担。

3.甲方付给工厂的货款应通过银行汇付，收款人必须与开票单位相一致。

四、信用证审证条款：甲方收到信用证后翻译并传真给乙方，由乙方决定是否接受，经书面确认后传真给甲方。

五、如遇国家汇率有较大幅度变动或国家调整退税率，甲乙双方另行商定补充协议，其补充协议与本协议具有同等法律效力。

六、签约期限从____年____月____日至____年____月____日。

七、本协议未尽事宜，由甲乙双方友好协商解决。若发生纠纷，依据《_____》的有关规定在合同签约地管辖法院诉讼解决。

八、本协议正本一式二份，双方签字盖章后生效，甲乙双方各执一份，具同等法律效力。

甲方：________________

代表(签字)：________

甲方(盖章)：________

乙方：________________

乙方(盖章)：________

应届生外贸实习报告范文3000字

毕业实习是一个学生从校园走入社会的第一步，这是很关键的一步，关系到以后能不能有积极的工作态度和敬业态度等。通过三个月的实习生活，我发现了自己有很多不足的地方。

一、实习目的

理论上：业理论与实际结合的重要方式，是提高政治水平、文化业务素质和动手能力的重要环节，只有通过实习才能更好的为将来的工作提供更好的基础，才能将自己在学校学到的知识更好的运用到工作上去，才能更好巩固好学到的知识。实习可以提供更多的动手能力的机会，是进入社会的第一步。通过深入企业，了解皮具生产的工艺和皮具的国际市场，，以及加深理解所学的知识，进一步提高认识能力、分析能力、解决问题的能力，为今后走向社会做好思想准备和业务准备，增强毕业后的就业、择业竞争力。

为了逐渐掌握怎样把学校学到的知识运用到实际工作中，让自己慢慢变的学会与别人相处，出去学生的浮躁和稚嫩，真正的接触这个社会，体会社会的人情冷暖，为日后的工作生活做更好的铺垫。

广东苹果实业有限公司是国内领先的皮具、成衣odm企业，主要生产中、高档真皮、牛仔及休闲服饰，自主完成产品研发，公司每年拨出5%的营业额作为新产品开发的经典，现在已有3个研发中心，人数达到80多人。在香港、广交会、日本、德国、意大利、迪拜等展销会上，都有亮丽的表现，成为公司皮具odm战略发展的强劲动力。

公司中有限资源，充分挖掘出自身的r&d及成本优势，通过与世界顶级品牌及买家的合作，达到世界一流皮具制造水平。通过充分掌握市场的动脉与全球流行趋势变化，苹果在思考任何设计创新概念时，永远先以客户需求为出发点，为odm&obm客户量身订做适合他的需求又符合时尚的产品与服务。

在追求新的奋斗目标进程中，苹果公司将一如既往地坚持“诚信为本”的企业文化，满足和超越客户的需求，并早日成为国际时尚产品界最具设计创新能力的企业。

二、实习任务

主要内容：在三个月的时间内掌握皮具整个过程的生产工艺，具体从皮具生产所需的物料，包括皮料、五金。还有裁床、车间、包装、计价、生产排产和掌握企业外贸跟单员的工作流程及操作。

三、实习步骤与内容：

在苹果公司实习的三个月来，我学到了很多在学校学不到的东西。在这期间我主要到工厂实习，了解和学习皮具生产工艺。到目前为止基本了解手袋生产的工艺。以及了解外贸跟单员的工作流程及操作。

实习的主要内容总结为：

工厂：

(1) 到仓库学习皮料五金：了解五金的收发、名称、质量的要求。皮料的收发、名称、质量要求以及所需的辅料。

(2) 裁床：了解/掌握开皮料技能、油边要点、重点掌握铲皮技能和压唛流程。还有了解皮料的损耗。

(3) 车间：车面和台面均需实习，掌握每一个工序的重要环节以及难易程度，掌握整个手袋生产的流程运作，对于车不同产品的难度在哪里。车位和台面的现场操作。

4) 计价：了解皮具的核算和损耗来对手袋计价。

(5) 生产排产：了解如何排产

(6) 板房：了解和掌握手袋的台面、纸格、设计

(7) qc、包装：了解包的质量检查、包装流程

(8) 物料包装资料：物料采购控制、计划、包装资料的订购等

(9) 外发：由于本厂资源人力有限，所以需要外发到其他的工厂加工，所以要了解外发的流程、核对物料等。

外贸部：外贸跟单员的工作流程及操作：

1.下达生产通知书。

跟单员接到客户订单后，应将其转化为生产通知单。通知单要明确客户所订产品的名称，规格型号，数量，包装要求，交货期等。

2.分析生产能力

生产通知单下达后，要分析企业的生产能力。能否按期，按质地交货。如不能应采取什么措施?要不要外包?

3.制定生产计划：

生产计划的制定及实施关系着生产管理及交货的成败。跟单员要协助生管人员将订单及时转化为生产通知单。

4.跟踪生产进度

(1) 生产进度控制流程;

(2) 生产进度控制作业程序;

(3) 生产进度控制重点;

a.实际进度与计划进度发生差异，要找原因。通常有下列原因： ①.原计划错误; ②.机器设备有故障; ③.材料没跟上; ④.不良率和报废率过高; ⑤.临时工作或特急订单的影响; ⑥.前制程延误的累积;⑦.员工工作情绪低落，缺勤或流动率高。

(4) 跟踪生产进度的表单：有：生产日报表，生产进度表，生产进度控制表，生产异常处理表，生产线进度跟踪表。

5.交期延误：

如是工厂原因，要通知客户，取得同意后方可出货。如不同意，一是协商，我们可承担部分费用将货出去。二就只好取消订单了。

如快递原因，要先告知客户，再催促快递公司，让他们尽快将货物送到客户手中。

6.有关订单的更改问题：

客户对已下的订单因市场变化会有更改，有数量上的，(或增加，或减少)。有规格上的。(产品描述，鞋图等)。有交期的变更。(或提前，或推迟)。接到客户要求变更，首先要看改什么?能否接受?如我们的货已生产的差不多了，已收尾，就不可能再更改了。如还没安排，问题不大。如已安排了部份，要进行协商。比如数量要减，我们已按原数量采购了材料，通用的问题不大。但如是专用的，客户要承担部份费用。对交期：如要提前，我们要根据实际情况说。如要推迟，时间短，问题不大，但如要延迟很长，那仓储费，损耗费要承担。

五、实习心得和体会

对于刚毕业的学生大部分是从底层做起的，所以要到工厂实习的事实并没有让我意外。三个月的跟单员实习生活与我想象中的工作有些差距，在实习的过程中，既有收获的喜悦，也有一些遗憾。也许是实习日子较短而我也并非跟单专业的关系，对这方面工作的认识仅仅停留在表面，常常在看人做，听人讲如何做，有些工作流程还没能够亲身感受和处理，所以还未能领会其精髓。但是通过实习，加深了我对不同跟单工作、跟单知识的理解，丰富了我的实际管理知识，使我对跟单员工作有了一定认识，同时提升了将所学知识运用到实际中去的能力。 跟单这个岗位是一份繁琐和辛苦的工作，工作量大，并且重复性工作多，对跟单人员的要求也很高，需要掌握产品知识、生产加工知识、单证知识、国际贸易实务，还需具备较强的综合分析能力、应变能力、协调能力、沟通能力，对英语的水平要求更高，不仅要会写，而且口语要过关，否则与客户的沟通就存在问题。所以我在实习期间也没有放松自己英语的学习。

通过在职的三个多月里，每一位同事都会耐心的跟我讲解业务知识，无私分享他(她)们的工作经验。在出现错误的时候，领导和同事都是本着体谅和教育的原则，避免伤害自尊心。但是相对于工厂里的部门相对冷漠一点，可能与他们平时工作的性质有关，他们很少会主动教我，一般是要靠自己多问多想的。有些甚至不理睬你，这种情况要有足够厚的脸皮才能找到你想要的。这一点真是需要我很大的勇气啊。鉴于我强大的学习欲望，和优异的内部环境、外部环境，我在逐渐的进步，已经融入了这个团队，融入了苹果的企业文化，但是在工作上和自身能力上还有很多需要改进的地方，我深感自己的不足，我会在以后的工作学习中更加努力，取长补短，虚心求教。相信自己会在以后的未来工作中更加得心应手，表现更加优异!不管是在什么地方任职，都会努力做得出色!

进口合同(样式一)

（3）金额为合同总价的形式发票一式六份。

（4）即期汇票一式二份。

（5）商业发票一式六份。

上述单据卖方应于本合同生效日起三十天内提交。

4.2.2 合同总的＿＿％，计＿＿（大写：＿＿），在卖按本合同第五章规定交货时，买方在收到卖方提交的下列单据经审核无误后不迟于三十天，将每批交货总价的＿＿％支付给卖方：

（1）全套清洁无疵、空白抬头、空白背书并注明“运费到付通知目的港中国对外贸易运输公司”的海运提单正本三份，副本三份；

（2）商业发票一式六份；

（3）即期汇票一式二份；

（4）详细装箱单一式六份；

（5）质量合格证一式六份。

4.2.3 合同总价的＿＿％，计＿＿（大写：＿＿），在买方收到下列单据经审核无误后不迟于三十天支付给卖方：

（1）商业发票一式六份。

（2）双方代表按本合同第九章规定签署的合同工厂交接验收证书的影印本一份。

（3）即期汇票一式二份。

4.2.4 合同总的＿＿％，计＿＿（大写：＿＿）。在按本合同第十章规定“合同工厂”保证期满后，买方在收到卖方提交的下列单据经审核无误后不迟于三十天即支付给卖方：

（1）商品发票一式六份；

（2）双方代表按本合同第十章规定签署的合同工厂保证期结束的确认书影印本一份；

（3）即期汇票一式二份。

4.2.5 合同总价的＿＿％，计＿＿（大写：＿＿）。买方应自＿＿日起，于＿＿年内，每＿＿个月为一期，平均分期按下列办法支付给卖方。

4.2.5.1 卖方应开立分＿＿期支付具有下述内容的远期汇票共＿＿份，每份正副本各一份于＿＿时提交买方：

（1）票面金额为合同总的＿＿％，另加第＿＿章＿＿条规定的延期付款的利息，计（大写：＿＿）；

（2）以＿＿日期为出票日，到期日分别为自出票日满＿＿个月；

（3）以买方为付款人；

（4）带有利息条款。利息按年息＿＿％计算自出票日起算至到期日止。具体金额如下：

票期 本金 利息 本利合计

第一期

第二期

……

合计

4.2.5.2 买方收到汇票后，于＿＿时即对上述分＿＿期支付的汇票正本承兑，并交北京中国银行背书保证后送交卖方。

4.2.5.3 卖方收到汇票后应在各期汇票到期日前，分别将汇票正本提交北京中国银行，由北京中国银行提请买方于汇票到期日后一天支付给卖方。

4.3 按本合同第＿＿章和第＿＿章规定，如果卖方应支付赔款或/和罚款等有关款项时，买方在按本章第4.2.2条，4.2.3条4.2.4条规定支付货款时有权从货款中扣除。

4.4 买方支付本章第4.2.1条所规定的货款时，应向卖方提交中国银行出具的以卖方为受益人金额为合同总价＿＿％和延期付款的利息的保证函（保证函格式详见本合同附件八）。

4.5 买卖双方因履行本合同所发生的银行费用，在中国发生的，均由买方负担，在中国以外发生的，均由卖方负担。

（注：方案二各项条款适用于延期付款的情况）

第五章 交货与交货条件

5.1 卖方应于本合同生效日后＿＿个月内分＿＿批将本“合同工厂”的“设备”交付完毕。

共17页，当前第6页1234567891011121314151617

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

委托办理进出口货物报关合同

合同编号：_________

委托方：_________?（以下简称“甲方”）

法定代表人：_________

地址：_________

邮编：_________

经办人：_________

电话：_________

传真：_________

受托方：_________?（以下简称“乙方”）

法定代表人：_________

地址：_________

邮编：_________

经办人：_________

电话：_________

传真：_________

甲乙双方本着自愿平等、公平合理的原则，经友好协商，就甲方委托乙方办理进出口货物报关事宜，双方一致同意订立以下合同条款，以供双方共同遵照执行：

一、甲方委托乙方办理的进出口货物的具体明细，由甲方另以书面的方式提供给乙方，并应在货物装船前_________?日、装飞机前_________日、船舶抵港前_________日或飞机抵港前_________?日前将以下材料或信息提供给乙方：

1.合同；

2.发票；

3.装箱单；

4.提单、空运单或其他运输单证；

5.提货单；

6.货物的hs编码；

7.贸易性质；

8.手册，批件，如进出口许可证，配额证，免税表，证明等；

9.报关要求及注意事项；

10.报关所需的其他资料。

二、乙方作为甲方的报关代理人，应在甲方的授权范围内进行活动，认真履行职责，维护甲方的合法权益。乙方在代理权限内的任何责任和费用都应由甲方承担。乙方只对因自身的过失与疏忽给甲方造成的直接损失负有责任。

三、甲方需要变更有关报关等事项的，应在报关前提出，并应出具书面的变更通知书。报关后有正当理由需要更改的，甲方应书面委托乙方协助办理。由于变更引起的一切费用和后果由甲方承担。

四、甲方必须保证报关货物不属于国家禁止或者限制进出境的物品。否则，甲方应对由此产生的一切后果承担责任和费用，并对由此给乙方造成的损失负赔偿责任。

五、甲方应保证申报的内容均真实、准确、无欺诈，且与报关单上的内容一致。如委托的内容与报关单有出入，以报关单为准，甲方应承担由于委托内容与报关单不一致而产生的一切责任，并对由此给乙方造成的损失负赔偿责任。

六、甲方有权对乙方的报关行为进行监督，有权要求乙方对于报关进展情况及时汇报。乙方应及时向甲方报告货物的报关、报检及报验等信息。

八、甲方如对海关开征的税额款有异议，应按《海关法》的规定办理，先缴纳后申请减免，手续费自负。乙方应积极协助甲方办理退税手续，手续费由甲方承担。

九、乙方应收取的具体每票业务的报关、报检和报验等费用标准和结算方式，详见《报价及结算单》，《报价及结算单》为本合同的附件，是本合同不可分割的一部分。《报价及结算单》中的内容甲、乙双方可根据情况进行变更，变更经双方书面确认后方可生效。变更生效前所发生的业务，仍按原《报价及结算单》的标准执行。若单票业务的委托书中的费用标准与《报价及结算单》不一致的，按该票委托书中的标准处理本票业务。对于《报价及结算单》和委托书中均没有约定的乙方应_____项目，双方另行协商处理。

十、甲方应按合同的约定履行付款义务，每逾期一天，应向乙方支付未付部分万分之五的违约金。若甲方指定第三方付款的，如第三方拒付、少付、延期付款的，甲方仍有付款义务并承担违约责任。

十一、对于甲方委托乙方代付海关关税、海关监管手续费、代征增值税的业务，甲方应在乙方指定的期限内将该税费付至乙方指定的帐户，最后据实结算，多退少补。其他费用如报关滞报金、船公司、航空公司及货代调单费等按实际发生额收取，甲、乙双方另行结算。

十二、在甲方未按照合同约定支付乙方费用时，乙方有权滞留相应的运输单据或货物，由此产生的所有损失和责任由甲方承担。

十三、由于海关、卫生检疫、动植检部门的审核、查验等原因造成乙方报关、报检、报验等延误的，所产生的疏港费、集装箱超期使用费及其他额外费用均由甲方承担，与乙方无关。

十四、由于海关的原因致使货物被扣押或者报关滞后的，乙方应积极协助甲方同海关进行交涉，由此产生的损失和费用由甲方承担。

十五、如因甲乙双方的过失致使合同不能履行，给双方造成了实际损失，应根据实际情况，由双方分别承担各自的责任。

十七、本合同项下发生的任何纠纷或者争议，双方首先就友好协商解决。协商不成的，提交上海_____委员会根据该会的_____规则进行_____。_____裁决是终局的，对双方都有约束力。

十八、本合同的订立、效力、解释、履行、争议的解决均适用中华人民共和国法律。

十九、本合同经甲.乙双方签字盖章之日起生效，合同有效期为一年。本合同期满之日前，甲、乙双方如无异议，则自动延长一年。任何一方均可在期满前提出终止合同，但应以书面方式通知另一方。

二十、经甲、乙双方协商一致，可对本合同进行修改和补充，修改及补充的内容经双方签字盖章后作为本合同的组成部分。

二十一、本合同一式两份，甲、乙双方各执一份，两份具有同等法律效力。

甲方：_________（盖章）乙方：_________（盖章）

代表：_________（签字）代表：_________（签字）

_____年____月____日_________年____月____日

附件：

一、报价及结算单；

二、双方的营业执照复印件；

三、受托方（乙方）的海关、检验检疫注册证书复印件

求职面试后如何写一封感谢信2016

一封言语恳切、表述恰当的感谢信可以帮助你得到下一步被考察甚至是获得最终录用的机会。

1.感谢信概述

①感谢信的定义

求职者向给予自己面试机会或者在求职方面支持帮助过自己的公司或个人表示感谢，作用是以求得录用单位录用或进一步考察的机会的专用性文书。

②感谢信的作用

表达谢意，传递感情;

自我营销，争取机会;

再次向企业展示自身的特质和能力。

③感谢信的重要性

加深审阅人员的印象，帮助回忆起自身的能力和表现;

建立审阅人员对自身的好感。

2.感谢信的撰写内容

①称谓

尊敬的先生/女士:

②自我介绍

我是，于××时间参加了第×场面试第×组的人员。

③表示感谢

能够有幸参加这次面试，有幸得到面试官的点评，有这样的机会已经是对自身的认可。

④陈述收获

参加此次面试学到了什么，在面试过程中面试官的点提。

⑤自荐补充(可选)

企业更看重哪方面的能力，有些能力其实是具备的，但由于某种原因，并未完全展示出来，愿意进一步自荐。

⑥客套收尾

再次表示感谢，并表示对到贵公司工作的期望。

⑦署名和日期

3.感谢信重点部分的撰写方式

①陈述收获部分

面试问题收获;

工作内容收获。

②自荐补充(可选)部分

适当使用;

表述原则。

4.感谢信的撰写原则

内容简洁原则(一定要简洁精炼);

谦虚有度原则(不要过分的放低自身的姿态，是应聘而不是乞求;不要过分的赞扬公司或面试官;表明就业兴趣和自身能力与岗位要求的匹配)。

面试感谢信范文

尊敬的经理:

您好!

我是来自**大学的，是参加昨天早上面试的第三个学生。非常感谢贵公司能够给予我这次宝贵的面试机会，能够和您交谈我感到非常的荣幸和开心。

通过此次面试，我从您那里学到了很多有用的知识，收获了不少有益的建议......

我非常期望自己能够得到进一步面试的机会，同时我应聘的职位也是我梦想中的岗位。我相信我已经为下次面试做好了充分的准备。再次感谢您在此次面试中颇具价值的经验分享。

期待能够早日与您再次相见。

*年**月**日

尊敬的各位考官：

我欲应聘贵校数学教师一职，下面介绍一下我的基本情况。

我叫，毕业于xx学校。我开朗自信，是一个不轻易服输的女孩。大多数人认为应届生缺乏教学经验，不过萨特也说，经验不可复制。一个教师的教学经验完全是一步步走出来的，正如学习游泳的过程便是游泳一样，教学的过程便是教学。四年来，由于家庭经济缘故，我勤工俭学，半工半读(曾带家教三年，给各种培训机构代课，并且将教学过程中所遇到的问题总结分析，写了许多教学方法探讨以及论文)，教过各类科目，如高等数学，中学数学，物理，统计学，乃至政治，历史。

关于专业知识这一点，曾在培训班当过高等数学的代课老师，并且在20xx年9月是用《数学是什么》(R.柯朗著，著名的数学科普书籍，包括中等数学大部分范围和少量微积分)为一高中学生讲授四十余天，期间穿插讲授康德哲学和认识论，学生接受良好，并且真正从账房先生式的数学学习模式中摆脱，几年来，我教过的学生都接受了我的一条信念：教师不是教授知识，而是教会你自己学习。

希望贵校领导可以给我一个努力的机会，我热爱教育事业，并将其视为实现人生价值的途径，四年来所做的一切就是为了做一个不平庸的教育工作者，而非教书匠，陶行知曾言：教育是艺术，艺术不是固定模式下的工业产品，艺术要激情和灵感并行，全身心投入事业。一旦学生懂得治学的道理，教师才算功德圆满，否则仅是知识贩子而已。

我的自我介绍完毕，谢谢大家。

受托方：(以下简称甲方)

地址：

电话：

传真：

联系人：

委托方：(以下简称乙方)

地址：

电话：

传真：

联系人：

委托方与受托方根据国家法律之规定，本着平等互利、协商一致的原则，同意订立进口代理合同，条款如下：

一、委托方授权受托方按以下条件代理其进口下列商品。

(1)质量要求：由委托方自行与外商商定，如出现质量问题受托方不承担责任。

(2)包装要求：适用于国际长途海陆运输包装。

(3)价格成交条款：

(4)交货日期及地点：约在合同签订后个月内启运港分批装运,受托方于货物通关后直接在进口口岸交货于委托方，运输及相关费用保险由委托方负责。受托方可协助委托方安排最终货物目的地的有关运输事宜。

(5)货物采购事项由委托方与外商具体协商，受托方仅负责货物进口报关手续及对外商付款手续。

(6)代理手续费：代理手续费为该合同货值的%(合同货值美元___%___人民币汇率)，汇率按人民银行公布的付款前一日的人民币汇率中间价计算。

二、货款及代理费的支付方式：

(1)对外付款方式：%货款T/T，%L/CATSIGHT(即期信用证);委托方与受托方签订本合同后15天内，委托方需支付本合同金额的%折合人民币汇至受托方账户，并由受托方在收到外商对应的%货款金额的银行保函后以电汇形式付至委托方指定外商处，同时受托方对外开出%合同货款金额的即期不可撤销信用证至委托方指定外商;委托方与外商所签署的合同关于%信用证分期付款条件如下：

第一期：外商提供的第一笔对应合同总金额%的发票及证明议付信用证项下%的合同总金额货款(预计时间为委托方与外商签订合同后天内);

第二期：外商提供的第二笔对应合同总金额%的发票及证明议付信用证项下%的合同总金额货款(预计时间为委托方与外商签订合同后天内);

第三期：外商提供的第三笔对应合同总金额%的发票及证明议付信用证项下%的合同总金额货款(预计时间为委托方与外商签订合同后天内);

第四期：外商提供的第四笔对应合同总金额%的发票及证明议付信用证项下%的合同总金额货款(预计时间为委托方与外商签订合同后天内);

第五期：外商提供整批货物的全套以受托方为收货人的提单、保险单、发票、装箱单等资料议付信用证项下%的合同总金额货款(预计时间为委托方与外商签订合同后个月内;委托方应当在开证前支付受托方%合同货款的保证金，受托方收取%开证保证金后对外开出合同金额85%的即期信用证至外商，对应每期信用证承兑付款至少天以前委托方将信用证每期对外付款的等值金额付至受托方，受托方收取的%保证金于信用证最终两单付款中抵减信用证付款金额;如委托方于信用证承兑前未支付完全额货款至受托方，委托方可按未支付款项总额的%/每天向受托方支付利息，如委托方在信用证承兑后20天内仍未支付完毕余额货款，则受托方有权处置进口货物，并且委托方需承担受托方因此而造成的任何相关损失以及责任。货款结算汇率以信用证付款当天银行美金卖出价计算，届时多退少补;如信用证到单承兑存在不符点，委托方需要以书面形式要求受托方予以承兑支付或者拒付该信用证货款，如承兑期限到达时受托方仍未收到委托方书面形式的决定，则视为委托方同意予以承兑支付;

(2)受托方代理费于进口货物全部清关、天津新港起运后3个工作日内收取(受托方根据委托方来款情况及指示开具增值税发票至委托方)。

三、其他：供应上述货品的外商系委托方自行联系确定，其资信情况由委托方负责。如该外商在交货时间和交货质量、数量上发生问题，受托方不承担责任。如海关对货物的商品编号、价格等有异议，委托方须配合提供相关资料，并按海关最后决议支付相关款项。

四、通关环节的有关费用(进口报关费、码头费、商检费、查验费、仓储费、运输费等)由委托方根据海关开给委托方的发票金额实报实销。

五、争议解决：凡因本合同的履行而发生的或与之相关的一切争议，应通过友好协商解决，如协商不成，任何一方均有权向合同签约地法院提起诉讼。

六、合同一式四份，双方各持两份，自双方盖章之日起生效。

甲方(公章)：_________

法定代表人(签字)：_________

_________年____月____日

乙方(公章)：_________

法定代表人(签字)：_________

_________年____月____日

我叫，是一个性格开朗、自信，不轻易服输的人。生活中我喜欢与人交往，通过与各种朋友相处，学习到了很多自身缺乏的优点。在学习上我积极认真，努力掌握专业知识，现在已经具有相关的办公室事务管理、文书拟写与处理公共关系策划与活动组织等能力。在校期间我曾担任系团委、学生会组织部部长，在工作中具有高度的责任感，能出色的完成本职工作，并协助别的同学，有很好的组织能力及团队协作精神。大学的学习、工作与生活使我树立了正确的人生观、价值观，形成了热情上进的性格和诚实、守信，有责任心的人生信条。面对社会的种种挑战，虽然我的经验和某些方面的技能水平不足，但相信在今后的学习、生活、工作中我会越做越好，以不懈奋斗的意念，愈战愈强的精神和忠实肯干的作风实现自我人生价值。

Morning， sir ! My name is ， it is really a great honor to have this opportunity for a interview， I would like to answer whatever you may raise， and i hope i can make a good performance today， eventually enroll in this prestigious university in september. now i will introduce myself briefly，i am years old，born in*province ，northeast of china，and i am curruently a senior student at uni.my major is packaging engineering.and i will receive my bachelor degree after my graduation in june.

in the past 4 years，i spend most of my time on study，i have passed CET4/6 with a ease. and i have acquired basic knowledge of packaging and publishing both in theory and in practice. besides， i have attendseveral packaging exhibition hold in Beijing， this is our advantage study here， i have taken a tour to some big factory and company. through these i have a deeply understanding of domestic packaging industry. compared to developed countries such as us， unfortunately， although we have made extraordinary progress since 1978，our packaging industry are still underdeveloped， mess， unstable， the situation of employees in this field are awkard. but i have full confidence in a bright future if only our economy can keep the growth pace still.

i guess you maybe interested in the reason itch to law， and what is my plan during graduate study life， i would like to tell you that pursue law is one of my lifelong goal，i like my major packaging and i wont give up，if i can pursue my master degree here i will combine law with my former education. i will work hard in thesefields ，patent ，trademark， copyright， on the base of my years study in department of p&p， my character? i cannot describe it well， but i know i am optimistic and confident. sometimes i prefer to stay alone， reading， listening to music， but i am not lonely， i like to chat with my classmates， almost talk everything ，my favorite pastime is valleyball，playing cards or surf online. through college life，i learn how to balance between study and entertainment. by the way， i was a actor of our amazing drama club. i had a few glorious memory on stage. that is my pride.

甲方: 住址：

乙方: 住址： 担保人： 地址：

甲方将富迪牌皮卡车转让于乙方。现订立车辆转让协议如下:

第一条:因双方交易车辆为旧机动车车辆，故双方签定协议时均对车身及发动机工作状况表示认同。

第二条: 价格：经双方协商该车的转让价为人民币￥48000元(大写：肆万捌仟圆整。

第三条: 权利义务：

1.甲方向乙方转让车辆时提供车辆证件;说明该车的现状。

2.乙方在购车时应认真检查甲方所提供的车辆证件、手续是否齐全。并且应对所购车辆的功能及外观进行认真检查、确认。乙方在购买该车后甲方概不负责车辆的维修以及相关规费的缴纳(注：该车辆登记证乙方付清款后方可拿证，该证乙方向甲方买车所欠的费用作抵押)。

第四条: 车辆过户：车辆必须在 年 月 日前过户，过户费用由 方承担。由甲、乙双方到车管所办理车辆过户手续，甲方协助办理。如果不过户，乙方要承担一切法律责任及后果。从卖车之日起发生的所有的一切责任由乙方负责。

第五条：售后责任：自合同签定之日起，车辆发生的一切纠纷均由乙方负责，甲方概不负责。在此之前甲方的所有债权、债务由甲方负责。

第六条 结算方式及期限：乙方将车辆验收合格后，按照第二条规定车辆价格，乙方首付甲方叁万圆人民币(￥：30000元)，剩余壹万捌仟圆(￥18000元)在农历20xx年12月15日前一次性付清给甲方。如有违约由担保人负责(或甲方有权扣押甲方所出售给乙方的车辆)。

第七条: 合同文本：本合同一式二份，双方各执一份。

第八条: 合同效力：本合同经买卖双方签字盖章后生效。

第九条: 违约责任：按(民法典)参照执行;解决合同纠纷的方式：双方友好协商，协商不成时任何一方可向所在地仲裁或向所在地人民法院起诉。

甲方： 乙方：

身份证号码： 身份证号码：

联系电话： 联系电话：

担保人：

身份证号码：

联系电话：

签定时间： 年 月 日