面试外贸主管简历怎么写(精彩20篇)

尊敬的招聘主管：

您好!

挚地向您推荐自己!我叫，是一名即将毕业的专科生，我怀着一颗赤诚的心和对事业的执著追求，真诚地向您推荐自己。

正直和努力是我做人的原则;沉着和冷静是我遇事的态度;爱好广泛使我非常充实;众多的朋友使我倍感富有!我很强的事业心和责任感使我能够面对任何困难和挑战。

作为一名即将毕业的学生，我的经验不足或许让您犹豫不决，但请您相信我的干劲与努力将弥补这暂时的不足，也许我不是最好的，但我绝对是最努力的。我相信：用心一定能赢得精彩!

我的自我介绍完毕，谢谢!

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

应聘者成功应对性格面试官八大秘诀

孙子兵法曰：“知己知彼，百战不殆。”倘若掌握了以下八种招式，你将如天马行空一般驰骋于各种职场之中。 一般来讲，你的“假想敌”——面试官分为以下几种表现形式： 1.性格外向型：充满活力；善谈；肢体语言丰富；赋有感染力；表里如一，想到什么就说什么。 2.性格内向型：外表冷竣，不喜形于色；不善言谈；几乎无任何肢体语言；喜欢沉思默想，而后出言表达。 3.性格感应型：语言简洁精炼，直述其意；无想象力，求实际，重事实。 4.性格直觉型：谈话高深莫测；喜用修辞和成语；无论其谈吐和表情都给人以模糊，含混的感觉。 5.貌如思想家型：富有严密的逻辑思维能力；善用分析和推理；性格墩厚。 6.敏感试探型：友好，温和；善解人意，富有同情心；善用外交手腕，处事圆滑。 7.貌如审判官型：非常严肃和冷静；具有决定性和组织的权威之感；凌驾于你的IQ和EQ之上，任意判断，独断专行。 8、貌如观察家型：喜顽皮，善用游戏等方式测试候选人；好奇心强；想法随意，大有天马行空之式。 “来而不往非礼也” 一般说来，你也可以有以下八种招式晓之以情，还之以礼： 1.顺从倾听式：(针对第一种性格外向型“假想敌”) 随他们去说，你只要做个好听众，面带微笑，频频点头，心领神会；时而温和平静，时而大笑，时而作惊讶状，时而作陶醉状，一言以蔽之要变化多端。 2.温和提问式：(针对第二种性格内向型“假想敌”) 时而提问，时而倾听；不要打断他的谈话，要有耐心，给他时间去沉思默想。 3.直截了当式：(针对第三种性格感应型“假想敌”) 直接切入正题；问一句答一句，有理有据，不要夸夸其谈；直接阐述你的实际工作经验，最好引述一两例成功案例。 4.假装领悟式：(针对第四种性格直觉型“假想敌”) 尽力保持谈话不要间断，亦可以引用成语和典故；要表现出你的创造性和古灵精怪的思维；强调你已经领悟了他高深莫测的寓意。 5.以毒攻毒式：(针对第五种貌如思想家型“假想敌”) 回答问题时，你也要逻辑严密；与他的观点和立身之道保持一致；表现出你也是公正无私、墩厚之人。 6.善解人意式：(针对第六种敏感试探型“假想敌”) 要温和，平稳；表现出你的热情助人行为，以及你的通情达理和为他人着想的美德；表现出你是如何协调组织和善于沟通不同人之间关系的能力； 7.被驯服式：(针对第七种貌如审判官型“假想敌”) 要有充分准备，作乖乖状且随机应变；谦虚谨慎，多向他征求意见；服从组织安排，要有“党叫干啥就干啥”的精神。 8.期待响应式：(针对第八种貌如观察家型“假想敌”) 要热情响应他的任何提议，积极参与协助对你的各种测试；时刻期待着回答他对你提出的各种问题，但要有选择性地回答；不要勉强做出评价和表达自己的意思。

技术进口企业经营合同

甲方：______ 乙方：______

中国技术进口总公司和__________国__________公司根据《中华人民共和国中外合资经营企业法》和中国的其它有关法规，本着平等互利的原则，通过友好协商同意在中华人民共和国__________省__________市共同投资，联合经营__________公司。

第一章合营公司的组成

1.1合营各方为：

中国技术进口总公司(以下简称甲方)在中国__________注册登记，其法定地址在中国__________省_______市________街______号;法定代表：姓名__________职务__________国籍__________。

__________国__________公司(以下简称乙方)在__________国__________地登记注册，其法定地址在__________国__________地;法定代表：姓名__________职务__________国籍__________。(如合营为多方者，可称丙，丁....方)

1.2合营公司的中文名称为：____________________外文名称为：____________________

合营公司的法定地址在合营公司根据业务需要，经有关当局批准后，可在国外或其它地方设立分支机构或办事处。

1.3合营公司是在中国境内设立的合资经营有限公司，是中国的法人、公司的一切经营活动必须遵守中国的法律，法令和条例的规定。

第二章营业范围与服务内容

2.1营业范围：

合营公司将承担下列各类项目的工程承包或咨询服务：

煤矿，冶金，石油，交通运输，水力发电，火力发电，核电站，水利，通讯，及上述各类项目的附属项目等。

2.2服务内容：

合营公司在其营业范围内，将为客户提供下列各类服务：

2.2.1工矿企业工程项目的新建，改建，扩建和技术改造，发展规划设计。

2.2.2初步可行性分析

2.2.3可行性研究

2.2.4项目评价

2.2.5选择土建施工部门

2.2.6土建工程的施工监督

2.2.7培训技术人员，管理人员

2.2.8技术转让

2.2.9董事会批准的其它服务项目

(注：可根据具体情况订立)

2.3合营公司将根据上述服务范围，类别及公司营业计划，寻求承担中国国内或国外项目。

第三章投资总额及资本转让

3.1合营公司的注册资本为__________元(人民币或双方商定的一种外币)

其中甲方出资__________元。占注册资本__________%

乙方出资__________元。占注册资本__________%

3.2甲乙双方将以下列方式作为出资

甲方：现金__________元，专有技术使用费__________元。共__________元。

乙方：现金__________元。机械设备__________元。专有技术使用费__________元，其他__________元。共__________元。

3.3合营各方在合营公司获得营业执照后__________天内，分期缴足投资资金，其应付金额和期限规定如下：....

任何一方对其出资额逾期缴付或欠缴按14.3条办理。

3.4.1注册资本的增加转让或以其它方式处置，均经董事会通过。并报原审批机关办理登记手续。

3.4.2合营一方向第三者转让全部或部分出资额，需经公司他方同意，公司他方有权优先购买其转让的股份，公司一方向第三者转让出资额的条件.不得比向公司他方转让出资额的条件优惠。

第四章利润分配和亏损负担

4.1合营公司利润在按中国税法纳税完了以后，由董事会决定扣除公司的储备基金，企业基金和职工福利基金后，合营各方按出资比例分享利润或分担亏损或风险。

4.2合营公司的资产负债，仅以公司注册资本为限。

第五章合营期限，终止合同及财产清算

5.1合营公司在领取营业执照后，即可以法人身份开始营业，合营期限为__________年，合营期满合营合同自行终止。

5.2如合营各方一致同意，延长合营期限，应在合营公司期满前6个月，向有关机构提出延长合营期限

的申请，每次延长以_____年为限。

5.3合营公司期限届满或提前解散时，董事会应指定一个清算委员会，清算委员会可包括或由全体董事组成，并按照中国的有关财务会制度订立公司清算计划。妥善进行清算，合营公司的全部财产资金用于偿还公司债务，履行赔偿义务支付清算费用后，所余全部财产均应依双在注册资本中所占的投资比例进行分配。

第六章合营各方的义务

6.1甲方责任：

6.1.1按照3.3条的规定，按时提供应分摊的资本。

6.1.2协助合营公司在中国注册并取得营业执照。

6.1.3按照合营公司的营业计划.为合营公司提供国内外工程项目。

6.1.4协助合营公司在当地招收有经验的和合格的经营管理人员，工程技术人员及工人。

6.1.5协助合营公司的外籍工作人员办理入境签证，工作许可证等手续。

6.1.6负责办理合营公司委托的其它事宜。

6.2乙方责任

6.2.1按照3.3条的规定提供应分摊的资本。

6.2.2按照11.1条及附件的规定，提供适用及先进的技术.乙方应尽最大努力取得所需要的出口许可证(详见附件)。

6.2.3按照合同规定.向合营公司提供有经验的合格的技术人员及高级管理人员。

协助合营公司聘请国外有关高级工程技术及管理人员。

6.2.4培训合营公司的技术人员，管理人员及其他工作人员。

6.2.5按照合营公司的营业计划，寻找国外有关工程项目。

6.2.6办理合营公司委托的其它事宜。

6.3免责范围：

合营各方除按合同规定享受权利，承担义务外，对于因合营公司的行为引起或与合营公司行为有关的任何间接或直接发生的损失或损害，双方均不向对方负责。

第七章董事会

7.1合营公司设立董事会。董事会为合营公司的最高权力机构。董事会由______名董事组成。其中甲方______名;乙方______名;董事长由甲方委派;设副董事长__________名.由__________方委派。

7.2董事长，副董事长及董事的任期为四年，任期期满后，如获继续委派可以连任。

任何一方可以随时更换自己委派的董事长，副董事长或董事，但必须书面通知合营的另一方。

7.3董事会的职权，决议程序及董事会的召开均按合营章程的规定执行。

第八章经营管理机构

8.1合营公司实行董事会领导下的总经理负责制，设总经理一名由________方推荐，副总经理_______名。由甲方推荐________名，乙方推荐__________名。正副总经理任期为__________年。

8.2总经理的职责是负责执行董事会的决议，组织和领导合营公司的经营管理工作，副总经理根据合营章程的.规定，协助总经理工作。合营公司将根据本公司的业务需要下设部门经理。负责部门业务的日常工作。并对总经理和副总经理负责。

8.3正副总经理由合营公司董事会任命和免职。正副总经理不得兼任其它公司和企业的总经理和副总经理的职务。各部门经理由总经理任命。

第九章财务会计制度

9.1合营公司的财务会计制度应根据中华人民共和国有关法律和财会规定。结合本公司的实际情况加以制定。合营公司注册登记后，应及时到当地财务部门和税务机关备案。

合营公司在中国银行开立人民币和外汇帐户，也可以在经批准和指定的国外其它银行开立帐户。

9.2合营公司的财务会计制度，应采用日历年制，自公历每年一月一日起至十二月三十一日止，为一个会计年度，公司会计采用国际通用的权责发生制和借贷记帐法记帐。一切记帐凭证，单据，报表，帐簿必须用中文书写，(也可以同时用甲乙双方同一种外国文字书写)。

9.3合营公司设总会计师，副总会计师各一名，总会计师的职权和责任按合营公司章程的规定执行，总会计师由_____方推荐。副总会计师由______方推荐，总会计师副总会计师均由董事会任命，

第十章劳动管理

10.1合营公司职工的雇佣，辞退，工资，福利，劳动保护，劳动保险及劳动纪律等事宜，均按《中华人民共和国中外合资经营企业劳动管理规定》和董事会与合营公司工会签订的劳动合同办理，劳动合同订立后.即报当地劳动管理部门备案。

10.2甲乙双方推荐及聘用的高级管理人员，高级工程技术人员的工资及福利待遇等问题由董事会讨论决定。

第十一章技术和服务的提供

11.1合营双方长期合作的一个重要目的，是由双方向合营公司提供先进和适用的技术和优质服务，推动合营公司业务，使其在国内获得卓越显著的经济效益，在国际市场上获得较强的竞争能力，技术和服务的提供将与公司从事的项目相结合，并支持项目的实施，公司还将根据具体情况制订培训计划，使其公司有关职员能成功地运用这些先进技术.技术和服务的提供方式，具体内容，费用标准等详见附件_____。

11.2合营公司与合营双方

签订的有关技术或服务协议，其期限为__________年，协议期满后.合营公司仍有权使用这些技术。

第十二章纳税

12.1合营公司按照中华人民共和国有关税法规定交纳各种税金。

12.2合营公司的职工按照《中华人民共和国个人所得税法》交纳各种税金。

第十三章保险

13.1合营公司的各项保险均向中国人民保险公司投保，由公司经理向董事会提出公司的保险计划，经董事会讨论决定后，以合营公司的名义办理投保手续。

第十四章违约责任

14.1合营一方因不履行合同或履行合同义务不符合约定条件，造成合营另一方损失时，受损失一方有权要求赔偿损失或采取其它补救措施.补救措施采取后尚不能完全弥补另一方所遭到的损失的，另一方仍有权要求赔偿损失。

14.2合营一方因违反合同而承担的赔偿责任，应相当于另一方因此而遭到的损失，并支付一定数额的违约金，其违约金的计算方法如下....

14.3合营一方未按期支付合同规定的应付金额，合营公司有权收取迟延支付金额的利息.从逾期第一个月起。

上述逾期的利息以各自出资的货币支付。

第十五章不可抗力

15.1合营双方因不可抗力事件(地震，台风，水灾，火灾，战争及其它不能预见并对其发生和后果不能防止或避免的不可抗力事故)以致造成受事件直接影响的一方迟延履行或无法履行本合同，在符合下列全部规定的情况下不作为违约处理。

15.1.1不可抗力事件是阻止、阻碍、迟延受事件影响一方履行合同的直接原因。

15.1.2受事件影响的一方在该事件发生的情况下，已经采取了所有能够实施的合理措施。

15.1.3受事件影响的一方。在遭受事件时，已立即通知合营他方。并在十五天以内，以书面形式提供事故情况，及处理结果和迟延履行或无法履行本合同的理由.并由该事故发生地的合法公证机关出具证明。

15.2一旦事件影响已克服或处理结束.受事件影响的一方必须立即通知合营他方。

第十六章争议的解决

16.1合同发生争议时，合营各方应尽可能通过协商或第三者调解解决，当事人不愿协商解决的，可以提交中国仲裁机构或双方同意的其它仲裁机构仲裁。在中国仲裁应遵守中国仲裁机构的仲裁程序，在其它机构仲裁应遵守该机构的仲裁程序。

16.2仲裁裁决是终局裁决，对双方都有约束力。

仲裁费用由败诉方负担或由仲裁裁定。

第十七章适用法律

17.1本合同的订立，效力，解释，履行和争议的解决均受中华人民共和国法律管辖。

第十八章合同的变更与解除

18.1经合营各方协商同意后，可以变更或修改合同，合营各方必须就此签订书面协议方能有效。

合营任何一方未征得合营他方的书面同意，不能将本合同章程和合同附件规定的权利和义务转让给第三者，违反上述规定以任何方式转让的合同均属无效。

前两款所述变更情况，按中国法律或行政规定，应由国家批准成立的合营合同，应经原审批机关批准方能有效。

18.2有下列情形之一的，合营一方有权通知他方解除合同。

18.2.1企业发生严重亏损，无力继续经营;

18.2.2另一方违反合同，以致严重影响订立合同时所期望的经济效益。

18.2.3另一方在约定期限内没有履行合同，在被允许迟延履行的合理期限内仍未履行合同。

18.2.4发生不可抗力事件.致使合同的全部义务不能履行;

18.2.5合同约定的解除合同的条件已经出现。

18.3有下列情况之一的合同即告解除。

18.3.1仲裁机构裁决或法院判决终止合同;

18.3.2双方商定同意解除合同.

18.4在合营合同解除时，双方有义务完成合营公司正在进行的项目。

第十九章合同生效及其它

19.1按本合同原则订立的如下附件，包括章程，协议，附件等均为本合同的组成部分.本合同条款与附件条款发生矛盾时，应以本合同条款为准。

19.2本合同经双方法定代表签字后，须经__________批准方能生效。

19.3本合同于__________年_______月_______日由甲、乙双方的授权代表在地签字。

代表签字：________________甲方见证人：(签字)______________ 年______月_____日

代表签字：________________乙方见证人：(签字)______________ 年______月_____日

于____年___月___日，_______先生________，___有限公司，_______先生_______________公司，鉴于售方同意出售，购方同意购买________________，其合同货物的质量、性能、数量经双方确认，并签署本合同，其条款如下：

1.商标

2.数量：___________________________

3.原产地：__________________________

4.价格：________________________..

5.装船：第一次装船应于接到信用证后30天至45天内予以办理。从第一次装船，递增至终了，应在12个月内完成。

6.优惠期限：为了履行合同，若最后一次装船时发生延迟，售方提出凭证，购方可向售方提供30天的优惠期限。

7.保险：由购方办理。

8.包装：用新牛皮纸袋装，每袋为_______公斤;或用木箱装，每箱为_________公斤。予以免费包装。

9.付款条件：签订合同后5天内购方通过开证行开出以售方为受益人，经确认的，全金额100%的，不可撤销的，可分割的，可转让的，允许分期装船的信用证，见票即付并出示下列证件：

全套售方商业发票;

全套清洁、不记名、背书提单;

质量、重量检验证明。

10.装船通知：购方至少在装货船到达装货港的7天前，将装货船到达的时间用电传通知售方。

11.保证金：

通知银行收到购方开具的不可撤销信用证时，售方必须开具信用证_____%金额的保证金。

合同货物装船和交货后，保证金将原数退回给售方。若出于任何原因，本合同规定的第12条除外，发生无法交货按数量比例将保证金作为违约予以没收支付给购方。

若由于购方违约或购方不按照本合同第9条规定的时间内，开具以售方为受益人的信用证，必须按保证金相同的金额付给售方。

开具的信用证必须满足合同所规定的条款内容。信用证所列条件应准确、公道，售方并能予以承兑。通知银行收到信用证后，通知银行应给开证银行提供保证金。

12.不可抗力：售方或购方均不承担由于不可抗力的任何原因所造成的无法交货或违约，不可抗力的任何原因包括战争、封锁、冲突、叛乱、罢工、雇主停工、内乱、骚动、政府对进出口的限制、暴动、严重火灾或水灾或被人们所不能控制的自然因素。

交货或装船时间可能出现延迟，购方或售方应提出证明予以说明实情。

13.仲裁：因执行本合同所发生的一切争执和分歧，双方应通过友好协商方式解决。若经协商不能达成协议时，则提交仲裁解决。仲裁地点在__________________由___________________仲裁委员会仲裁，按其法规裁决。仲裁委员会的裁决是终局裁决，对双方均有约束力。仲裁费用应由败诉方承担。除进行仲裁的那部分外，在仲裁进行的同时，双方将继续执行合同的其余部分。

14.货币贬值：若美元货币发生法定贬值，售方保留按贬值比率对合同价格予以调整的核定权力。

15.有效期限：本合同签字后，在7天内购方不能开出以售方为受益人的信用证，本合同将自动失效。但购方仍然对第11条中第__项规定的内容负责，支付予以补偿。

本合同一式两份，经双方认真审阅并遵守其规定的全部条款，在见证人出席下经双方签字。

售方：___________________

购方：___________________

见证人：___

各位考官早上好。我是郑州师范学院数学系x届数学教育专业的一名毕业生，名叫，很高兴能有机会在此向各位考官学习!

广西师范学院数学系是我们学院最悠久、教学质量最优异的系别，在此学习环境下，使我的知识能力受益匪浅。 在学好专业课的同时，我勤练教师基本技能，有较好的教学语言表达能力，掌握了教育学和心理学的许多知识，在假期从事的家教工作中加以运用。在实习期间，我思索激励教法、课件制作和教具选择，在课堂上取得了学生主动要学的效果，得到了校领导和指导老师的好评。

我出生于教师家庭， 对父辈循循善诱的引导深受感染;对父辈们的殷殷嘱咐，使我踏踏实实、勤勤恳恳做人;对所受到的学校教育，让我用科学的理论知识的专业技能干好每一件事;坦诚、踏实的性格，让我在工作中与领导、同事相处融洽，较好的完成了各项任务。

我期望：有一个合适的平台，用我的热情和智慧去全力开拓、耕耘。

我希望：能到贵学校任职，为贵校的发展出一份力，相信我的付出也正是您的英明选择!

我坚信：只要不断地在社会这个大熔炉中学习，用“心”去面对一切，必然能不断战胜自己、超越自己，逐步走向成功!

代理出口协议

协议编号：__________

甲方：___（委托方）

地址：_____________

电话：_____________

传真：_____________

邮编：_____________

电子信箱：_________

乙方：___（受托方）

地址：_____________

电话：_____________

??传真：_____________

??邮编：_____________

电子信箱：_________

签约时间：_________

签约地点：_________

甲、乙双方本着互惠互利、共同开拓出口渠道、在营销上发挥各自优势的原则，就甲方委托乙方出口其产品给甲方指定的境外客户（以下简称外商）一事，经友好协商达成一致，兹同意按照下述条款签订本协议书：

一、总则

本协议为建立甲、乙双方间法律关系的总协议，甲、乙双方将就每一批实际出口的货物签订具体的《收购合同》；双方所签订的每一份《收购合同》均自动受本协议约束，如有冲突，以本协议规定的为准。

二、代理事项

1.甲方委托乙方代理出口其产品， 有关产品的具体数量、质量、规格、价格、付款方式、交货期、目的港和保险等条件，由甲方与外商自行协定并且直接对外商负责。因出口货物的质量、数量、包装、交货期等问题而引起的责任和损失均由甲方负责，乙方不承担任何责任。

2.甲方负责根据其与外商商定的交货期安排生产，并于货物报关出口前三个工作日向乙方提供真实、准确的出口产品的品名、规格、数量、金额、装箱情况等资料，并提供《商检换证凭单》，以便乙方按此资料向海关申报及履行相关手续。若因甲方所提供的材料与实际出口货物情况不符，而造成海关扣柜或处罚时，由此造成的延误船期和延期交货的责任和损失由甲方承担，甲方应赔偿乙方因此而遭受的海关处罚及其带来相应损失。如有其他特殊情况，由甲乙双方共同协商处理，承担各自责任及费用。

3.甲方负责安排远洋运输（费用由甲方承担）租船订仓事宜，并及时将船公司提柜纸传真给乙方，并告知该船的截关日期；乙方负责根据甲方提柜纸安排提柜和由甲方工厂至深圳码头的拖车，并承担此段的拖车费用；乙方负责向海关申报货物出口，并办理有关出口报关的一切手续，并承担相应的报关费用及其他相关费用。乙方负责在出口货物装柜后按照实际装柜情况填制《收购合同》，并由甲乙双方签字确认后盖章生效。

4.乙方在收到甲方提供的装箱资料后，应及时对甲方的出口业务免费制作全套单证。并安排报关出口。若非客观原因造成出口耽误而引起客户索赔，乙方应负责由此而发生的一切衍生之费用。

三、退税

1.退税由乙方办理。

2.甲方应在货物出口报关后三日内向乙方交付涵盖相关《收购合同》项下全部货物的、合法有效的增值发票及《税收（出口专用）缴款书》。在此之前，乙方无义务向甲方支付相关《收购合同》中规定的税款。如甲方在货物出口报关后三十日内未能将上述票据交付给乙方，或甲方所交付的票据未能通过退税主管机关的审查，则甲方无权依据《收购合同》要求乙方支付《收购合同》规定的税款；乙方已经向甲方支付税款的，甲方应予退回。

四、支付方式

1.定金支付方式：

（1）乙方在收到外商支付的定金后三个工作日内，将相应外汇款项按照_________的汇率折算成人民币支付给甲方。

共2页，当前第1页12

我是*学院工程管理系建筑工程造价专业的学生。大学期间，我以优秀成绩，多次获得校综合，国家励志奖学金，并多次被评为优秀学生荣誉称号，以满足专业知识。

在造价专业上，我学习了《工程造价计价与控制》、《工程经济学》、《市政工程计量与计价》、《建筑工程计量与计价》、《安装工程计量与计价》、《合同管理与招投标》、《建筑审计》等专业课程。熟练操作并应用晨曦计价软件、华平钢筋计算软件和CAD建筑绘图软件。

在校时经常做专业课程设计，并到工地现场进行一星期的现场观摩实习，跟着高级工程师黄工学习以及实践，掌握了经纬仪在工地上的应用，混凝土试块的检验，钢筋的绑扎以及熟悉配筋图，了解一些应办理施工签证的情况等等。在学校学习的理论知识与实践结合起来，更加全方面地掌握专业技能。学习之余，我参加了大量的社会实践活动，从而锻炼了自己吃苦耐劳，一丝不苟的工作做风. 现代社会需要的是理论和实践相结合的复合型人才。我会通过不断的学习来完善自己，在实践中证明自己。为实现自己的人生价值而奋斗，为贵公司的发展贡献力量。

国际秘书节是每年四月的最后一个完整的星期的周三。20xx年,亚商在线首次将“秘书节”引进中国。

一、秘书工作的内容 一般秘书的工作内容，在我国政府机关与企事业单位，一般秘书的工作内容概括起来就是既要执行政务，又要处理事务。秘书三办：办事、办文、办会

定义：秘书是在授权范围内，辅助领导实施综合管理和处理日常事务的专业人员。

二、秘书的职业特征[两性三化] 1.服务的直接性 2.服务的稳定性 3.知识化 4.年轻化 5.女性化 三、秘书工作的要求 “三个服务” 1.为领导服务。2.为职能部门服务。3.为员工服务。 ----现代秘书 四、秘书工作的特征 ：辅助性、综合性、服务性、机要性 五、秘书工作的作用：助手作用、参谋作用、协调作用、枢纽作用、公共关系作用

第二节 秘书的素养

一、秘书的知识结构 知识结构，是指人们所学的知识在头脑中的有机联结与组合，也是一个人知识层次的构成的情况。知识结构是一个开放的、不断更新的体系，即对内可以自我调节、对外可以不断适应的体系。 秘书所应具备四方面知识的纵横结合，结构可用罗马字母“Ⅱ”来表示。秘书的知识结构应当具备专与博的兼容性.基础知识、专业知识、行业知识和相关知识

二、秘书的能力 写作能力、口头表达能力、听知能力、阅读概括能力、社交活动能力、协调能力、观察分析能力、应变能力、使用先进办公器械的能力、预测能力

三、秘书的职业道德----“忠诚保密” 我国秘书职业道德的基本传统 以“忠、信、义”为灵魂，中国传统的秘书在具体职业行为中就常常表现为甘为幕后，甘当无名英雄，把辅佐对象的事业当作自己的事业。“鞠躬尽瘁，死而后已”，成为他们职业生涯的真实写照。 现代秘书职业道德的基本内容 ：

1.忠于职守，爱岗敬业

2.恪守信用，严守机密 职业秘书保守秘密既是一个职业伦理和职业道德范畴的问题，同时也是一个遵纪守法的问题。

3.遵纪守法，廉洁奉公

四、秘书的心理素质 (一)秘书的心理 1.广泛的兴趣 2.坚韧的意志 3.稳定的情绪 4.缜密的思维 5.非凡的记忆 秘书的心理障碍 1.自卑心理 2.高傲心理 3.盲从心理 (二)秘书心理素质的培育 1.气质与职业：胆汁质、多血质、粘液质、抑郁质。 2.气质与性格: 3.秘书的性格：开朗 敏捷 稳健 坚毅 幽默 自制

五、秘书的智商IQ和情商EQ

秘书的智商 秘书的情商，情商是指人在情绪、情感、意志、受挫力等方面的心理品质。 (一)自我意识 (二)自我激励 (三)情绪控制 (四)人际交往 (五)对挫折的承受力 IQ决定录用 EQ决定提升。

面试官您好，很感谢贵公司给我这次面试机会，我感到很荣幸。我是工业工程职业技术学院xx届计算机网络专业应届毕业生。平时我喜欢运动，性格活泼开朗，能关心身边的人和事，和亲人朋友融洽相处，能做到理解和原谅，我对生活充满信心。

大学四年里，我对计算机产生了浓厚的兴趣，喜欢计算机编程，大2时候还在院计算机网络中心做过一年计算机维护工作，这更增加我的信心。

我的专长是数据库开发,我希望能从事这方面的工作.我曾开发过多个系统，基中有：成绩管理系统、人事档案管理系统、工资管理系统等等。

作为一名应届毕业生，我所拥有的是年轻和知识。年轻也许意味着欠缺经验，但是年轻也意味着热情和活力，我自信能凭自己的能力和学识在毕业以后的工作和生活中克服各种困难，不断实现自我的人生价值和追求的目标。谢谢!

小额贷款公司总经理聘用合同范例

甲方：（以下简称甲方）

乙方：（以下简称乙方）

甲乙双方根据《中华人民共和国劳动法》等法律、法规、规章的规定，在平等自愿、协商一致的基础上，同意订立本合同，共同遵守本合同所列条款。

第一条 合同期限和工作内容

1、本合同有效期：自 月 日至201  月日止。合同期满聘用关系自然终止。

2、聘用合同期满前个月，经双方协商同意，可以续订聘用合同。任何一方认为不再续订合同的，应在合同期满前 个月通知对方。

3、根据甲方工作需要，乙方同意从事方协商同意，可以变更工作岗位。

（一）岗位职务名称： 有限公司总经理

（二）直接上级：董事长

（三）直接下级：行政部、生产部、质量部、销售部、技术部、仓储部。

第二条 权利与义务

1、 总经理权利

（1）、人事权：可经随时任命和撤换公司除财务部经理之外的任何干部的权利，主导人事方面的所有工作。财务部经理的任免权归董事长所有，总经理有提议权。

（2）、财务权：可独立审批 元之内的财务支出，并初审所有的财务开支，由财务部经理最终批复。上述额度以外的财务支出由董事长书面批准

（3）、日常事务的决策权：所有部门（财务部除外）主管只能向总经理汇报工作并从总经理这里接受工作指示。董事长必须充分的尊重总经理的权利。

2、总经理义务：

（1）、在董事长的领导下开展工作，对公司全面经营业绩负责。建立公司规章制度，并要带头遵守。建立完善各项人事制度、行政制度。建立良好的企业文化，营造恪守制度、和谐相处、互学互助的良好氛围。

（2）、建立营销体系，控制应收账款的额度，优化库存商品。制定年度、季度、月度销售目标，协助各部门经理制定年度、季度、月度工作计划，并监督、辅导执行，负责公司月度、季度、年度总结工总会议的召开。

（3）、明确总经理岗位职责，确保对公司的有效管理。加强生产经营质量管理，不断提高供公司管理素质，进行技术革新、技术改造，不断提高公司的技术素质。使员工收入逐年增长，福利条件不断改善。每月定期向董事会进行述职，上交述职报告。

（4）、公司重大投资及对外加工合作、贴牌等须向董事会报告，经董事会同意，董事长签字后才能实施。

第三条 工作条件和劳动关系

1、 工作时间和休息休假：

（1）、乙方实行不定时工作制，平均每周休息二天；

（2）、乙方在合同期内享受国家规定的各项休息、休假的权利；

2、劳动报酬：

（1）、乙方基本工资为元人民币/月，试用期 个月领取月工资  元，转正后自第个月起领取元，余额年底达到销售回款目标  万后付给，若未达到此目标，不再领取余额。电话费实报实销。

（2）、年底奖励：年底甲方按公司实现的财务利润总额的 %奖励乙方。

（3）、乙方基本工资增长办法：乙方基本工资以上年基本工资为基础，按销售回款增长率的%增长，增长部分在年底兑现。但年增长率不得超过%。

（4）、电话费实报实销不变。

3、车旅费报销

开车出差过路费、加油费实报实销；乘车出差车票实报，每日补助住宿元，当天能回不报住宿费；需宴请客户另计开支。

第四条 工作纪律和奖罚

1、 乙方应遵守国家的法律、法规。应遵守甲方规定的各项规章制度和劳动纪律，依法行政。

2、 乙方如违反甲方的规章制度、劳动纪律，甲方按市府和单位的有关规定给予处罚。

第五条 聘用合同的变更、终止和解除

1、 聘用合同依法签订后，合同双方必须全面履行合同规定的义务，任何一方不得擅自变更

合同。确需变更时，双方应协商一致，并按原签订程序变更合同。双方未达成一致意见的，原合同继续有效。

2、 聘用合同期满或或者双方约定的合同终止条件出现时，聘用合同即自行终止。在聘用合

同期满一个月前，经双方协商同意，可以续订聘用合同。

3、 甲方单位合同被撤销，聘用合同自行终止。

4、 经聘用合同双方当事人协商一致，聘用合同可以解除。

5、 乙方有下列情况之一的，甲方可以解除聘用合同。

（1）在试用期内被证明不符合聘用条件的；

（2）严重违反工作纪律或聘用单位规章制度的；

（3）故意不完成工作任务，给公司造成严重损失的；

（4）严重失职，营私舞弊，对甲方单位利益造成重大损害的；

（5）被依法追究刑事责任的。

6、有下列情况之一的，甲方可以解除聘用合同，但应提前

（1）乙方患病或因工负伤医疗期满后，不能从事原工作，也不愿从事甲方另行安排适当

工作的；

（2）乙方不能胜任工作，经过培训或者调整工作岗位，仍不能胜任工作的；

（3）聘用合同订立时所依据的客观情况发生重大变化，致使已签订的聘用合同无法履行，

经当事人协商不能就变更聘用合同达成协议的；

（4）乙方不履行聘用合同的。

7、有下列情形之一的，甲方不能终止或解除聘用合同

（1）乙方患病或负伤在规定的医疗期内的；

（2）法律、法规规定的其他情形。

8、甲方未按照聘用合同约定支付报酬或者提供工作条件，乙方可以通知聘用单位解除聘用

合同。

9、乙方要求解除聘用合同，应当提前

第六条 违反和解除聘用合同的经历补偿

1、 经聘用合同当事人协商一致，由甲方解除聘用合同的，甲方应根据乙方在本单位工作年限，每满一年发给相当于一个月工资的经济补偿，最多不超过十二个月。

2、 乙方不能胜任工作，经过培训或者调整工作岗位仍不能胜任工作，由甲方解除聘用合同的，甲方应按照其在本单位工作年限，工作时间满一年，发给相当于一个月工资的经济补偿，最多不超过十二个月。

3、 聘用合同订立时所依据的客观情况发生重大变化，致使已签订的合同无法履行，经当事人协商不能就变更合同达成协议，由甲方解除聘用合同的，甲方按受聘人员在本单位工作年限，工作时间每满一年发给相当一个月工资的经济补偿。

4、 甲方单位被撤销的，甲方应在被撤销前按乙方在本单位工作年限支付经济补偿金。工作时间每满一年，发给相当于一个月工资的经济补偿。（经济补偿金的工资计算数为乙方被解除聘用合同的上一年月平均工资）。

5、 聘用合同履行期满，乙方要求解除聘用合同的，应按不满聘用合同规定的期限，支付当月基本工资作为违约金给甲方。

6、 乙方因“用人单位未按照聘用合同的约定支付报酬”而通知甲方解除聘用合同的，甲方应按合同约定结算聘用合同的同时支付欠发的工作报酬。

第七条 其他事项

1、甲乙双方因实施聘用合同发生人事争议，按法律规定，先在甲方所在地申请仲裁，对仲裁裁决不服，可向甲方所在地人民法院提起诉讼。

2、本合同一式三份，甲方两份，乙方一份，经甲、乙双方签字后生效。

3、本合同条款如与国家法律、法规相抵触时，以国家法律、法规为准。

甲方：（盖章）乙方：（签字）

法定代表人：（签名） 住址 :地址：  身份证：

电话：  电话：

年月日 年月日

出口信用证抵押外汇贷款合同样本下载

借款人：_________

法定地址：_________

贷款人：_________

法定地址：_________

贷款人和借款人就借款人以信用证为抵押向贷款人申请外汇贷款一事共同协商签订合同如下：

第一条 双方同意以下定义

1.信用证：由银行开出通过通知编号为_________的信用证。

2.债务：指借款人在本合同项下应付的贷款本金、利息及与此有关费用。

第二条 贷款金额和用途

1.本合同贷款金额的最高额为_________

2.本合同项下贷款限于借款人正常生产经营所需流动资金。

第三条 期限

本合同项下的贷期限从合同签订日起_________个月。

第四条 利息与费用

1.本合同项下的贷款利率为_________。

2.贷款从第一笔提款日起息，利息以1年360天为基础，根据实际占用的天数计算。

3.贷款的结息日为每季第三个月的20日和贷款到期日。

4.借款人到期应付利息由贷款人主动从借款人开立在贷款人处的存款帐户内扣收。

第五条 信用证的抵押和还款

1.本合同签订之日起，借款人将第一条款第一点下的信用证正本抵押给贷款人并由贷款人保管，作为贷款的还款保证。

2.在提交单据后，借款人保证叙做出口押汇并授权贷款人将押汇收入直接用于归还贷款。

第六条 陈述与保证

借款人在此作如下陈述与保证：

(1)借款人是从事商务经营和有民事行为能力的经济法人，按中华人民共和国法律登记、注册，具有执行、履行所有民事行为的能力。

(2)本合同的制定、签署、执行符合借款人所在地的法律、法规、条令、制度。借款人已办妥所有签署本合同的合法有效的手续。

(3)保证根据出口信用证条款的要求按时发运货物，履行信用证规定的各项义务。

(4)保证及时将抵押信用证规定的出口单据向贷款人提交议付。

(5)按时支付利息和归还贷款。

(6)保证按本合同第二条第2条款规定的用途使用贷款。

第七条 违约

下列事件属于违约：

(1)借款人未按信用证规定的日期出运商品。

(2)借款人在本合同第六条款中所做的陈述与保证不真实或不履行。

(3)借款人将抵押信用证项下的单据向其他金融机构议付。

(4)借款人擅自改变贷款用途，挪用贷款。

(5)借款人发生或将要发生解体、重组或破产。

(6)借款人违反本合同其他条款。

第八条 违约的处理

1.在上述一项或数项违约事件发生后，借款人必须在收到贷款人发出的违约通知后的7天内采取积极有效的措施，消除和弥补因借款人违约所造成的或可能造成的损失。

2.在这种情况下，贷款人有权采取以下部分或全部措施：

(1)对违约金额处以_________%的罚息。

(2)宣布部分或全部贷款到期，主动从借款人帐户中扣还贷款及其他费用。

(3)冻结借款人在贷款人处的存款户，如借款人的债务没有得到全部清偿，贷款人保留进一步追偿的权利。

(4)采取任何其他足以维持贷款人在本合同项下权益的措施。

上述措施的采取并不影响贷款人在本合同项下的任何权利，对此，借款人无条件放弃抗辩权。

第九条 其他

1.本合同在贷款人和借款人签字盖章后生效，有效期至借款人在本合同项下全部债务清偿后止。

2.本合同受中华人民共和国法律管辖。

3.本合同中文正本一式两份，签约双方各执一份。

借款人(盖章)：_________

贷款人(盖章)：_________

法人代表或授权人(签字)：_________ 法人代表或授权人(签字)：_________

_________年____月____日

_________年____月____日

签订地点：_________

签订地点：_________

我是某某某学院工程管理系建筑工程造价专业的学生。大学期间，我以优秀成绩，多次获得校综合，国家励志奖学金，并多次被评为优秀学生荣誉称号，以满足专业知识。

在造价专业上，我学习了《工程造价计价与控制》、《工程经济学》、《市政工程计量与计价》、《建筑工程计量与计价》、《安装工程计量与计价》、《合同管理与招投标》、《建筑审计》等专业课程。熟练操作并应用晨曦计价软件、华平钢筋计算软件和CAD建筑绘图软件。

在校时经常做专业课程设计，并到工地现场进行一星期的现场观摩实习，跟着高级工程师黄工学习以及实践，掌握了经纬仪在工地上的应用，混凝土试块的检验，钢筋的绑扎以及熟悉配筋图，了解一些应办理施工签证的情况等等。在学校学习的理论知识与实践结合起来，更加全方面地掌握专业技能。学习之余，我参加了大量的社会实践活动，从而锻炼了自己吃苦耐劳，一丝不苟的工作做风. 现代社会需要的是理论和实践相结合的复合型人才。我会通过不断的学习来完善自己，在实践中证明自己。为实现自己的人生价值而奋斗，为贵公司的发展贡献力量。

我叫，毕业于x大学酒店管理专业。我是一个工作认真负责、积极主动、善于团队工作的人;思维严谨;拥有丰富的酒店管理工作经验，任职期间组织过各项大型接待、美食节活动，管理宴会销售及组织大型宴会是本人工作强项之一。具有高星级酒店餐饮领域的全面管理能力、协调能力、运作能力和创新能力;有高星级酒店筹建直至酒店正常运作之良好开拓经验;熟悉各类酒店系统管理软件的运用。对餐饮财务管理和成本监控有较强的工作能力!能根据企业的实际情况，统筹制定实用有效的餐饮管理和内部控制制度，从而使企业管理走向制度化、规范化和现代化。

甲 乙 方： 签订日期：月

根据《中华人民共和国劳动法》、《中华人民共和国劳动合同法》、

《宁夏回族自治区劳动合同条例》等法律法规和规章的规定，甲乙双方遵循合法、公平、平等自愿、协商一致、诚实信用的原则订立本合同，共同遵守本合同所列条款。

一、劳动合同双方当事人基本情况

第一条 甲方 石嘴山市德瑞食府

法定代表人(主要负责人)徐正玉

注册地址 石嘴山市大武口区青山南路305号

经营地址 石嘴山市大武口区青山南路305号

联系电话 0952-5811818

第二条 乙方 性别

户籍类型(非农业、农业)

身份证号码

家庭住址 邮政编码

户籍所在地

联系电话

二、劳动合同期限

第三条 本合同期限经甲乙双方协商一致，确定本合同期限为：

固定期限：即从20xx年1月1日起至20xx年12月31日止。

三、工作岗位和工作地点

第四条 甲方根据工作岗位的实际需要，安排乙方担任石嘴山市德瑞食府总经理 岗位工作。

第五条 乙方的工作区域或工作地点为石嘴山市德瑞食府。

第六条 乙方应按照确定的工作内容、工作标准和工作要求，认真履行岗位职责，按时完成工作任务，遵守甲方依法制定的规章制度。

四.权利义务

第七条 (一)甲方由董事会行使下列职权：

1、公司的经营方针和投资计划;

2、制订公司的年度财务预算方案、决算方案;

3、制订公司的利润分配方案和弥补亏损方案;

4、决定公司内部管理机构的设置，决定公司的基本管理制度;

5、监督乙方的工作

(二)乙方：

1、对甲方的生产经营管理负全面责任，行使一切生产经营管理职权，并接受甲方董事会的监督。保证甲方安全生产，长效管理，保值增值。

2、遵守法律法规和财务会计制度，拟订公司内部管理机构设置方案，拟订公司的基本管理制度;

3、不得改变甲方的法定代表人、名称和经营范围，如确实需要改动，应经董事会同意;

4、对甲方的财产无处分权，包括但不限于转让、转移、抵押、质押、出租、赠与等;

5、聘用经营期间，若以甲方的名义贷款，须经甲方董事会同意;

6、不得以甲方名义对外提供任何形式的担保;

7、应于每月5日前据实向甲方董事会报送甲方的财务报表;

8、聘任或者解聘除应由董事会聘任或者解聘以外的负责管理人员;

9、公司章程和董事会授予的其他职权。

五、工作纪律和保密要求

第八条 工作纪律和保密要求

1、乙方应严格遵守国家的法律法规，遵守甲方制定的各项规章制度;

2、不得从事与公司相竞争或损害公司利益的活动;

3、不得利用职权收取贿赂或者谋求其他非法报酬;

4、乙方不得将甲方的秘密(包括技术秘密和商业秘密)擅自公开或出让。

5、乙方离开聘用单位一年内，不得非法使用甲方的秘密资料，不得侵犯甲方的经济权益，否则追究侵权责任

六、工作时间和休息休假

第九条 甲、乙双方同意乙方的工作时间为不定时工作制，即经劳动行政部门审批，乙方所在岗位实行不定时工作制，每周至少休息一天。

第十条 在合同期内，甲方依法保证乙方享受国家和自治区规定的法定节假日、生育假、探亲假、婚丧假、工休假等带薪假期。

七、劳动报酬

第十一条 (一)报酬的计算

1、乙方受聘期间的报酬构成为：月薪+提成+年终红利;

2、乙方在合同期内的月薪为：人民币8,000.00元;

3、提成办法：当乙方完成下列目标任务时：

(1)营业额净额达到90.00万元;

(2)综合毛利率不低于50.00%;综合毛利率=(营业额净额-营业成本)/营业额净额*100

(3)应收账款回收周期不超过90天;

按照下列办法计提提成报酬：

当营业额净额达到90.00元时，营业额净额每增加1.00万元，按增加额部分的2%计提提成报酬。

4、年终红利：年终红利按年利润总额的2%派发干股红利。

利润总额=营业收入-折扣-营业成本-税金及附加-固定经营费用(固定资产折旧+装修费用摊销+房租，全年共计145.00万元)-变动经营费用-管理费用-财务费用

5、处罚办法：

(1)综合毛利率低于50.00%时，每低于一个百分点，扣提成报酬200.00元;

(2)应收账款回收周期超过90天，按超过回收周期应收账款的1%扣提成报酬。

6、提成报酬实施时间：

本合同第十一条第三款、第五款自20xx年5月起开始实施。

第十二条 (二)报酬的发放

1、薪金发放时间为：每月15日发放上月月薪金;每月30日发放上月提成薪金。

2、薪金的发放方式：甲方通过银行转帐的形式将乙方薪金转入乙方帐户内或现金支付。

八、福利待遇

第十三条 乙方在合同期内，患职业病或因工负伤、休息休假、患病、生育、死亡等待遇，以及医疗期、孕期、产期、哺乳期的期限及待遇，按国家、自治区及统筹地区的有关规定执行。

九.劳动保护、劳动条件和职业危害防护

第十四条 甲方根据国家有关法律、法规，建立安全生产制度。 乙方应当严格遵守甲方依法制定的劳动安全制度，严禁违章作业，防止劳动过程中的事故，减少职业危害。

第十五条 甲方根据生产岗位的需要，按照国家有关劳动安全、卫生的规定为乙方配备必要的安全防护措施，发放必要的劳动保护用品。安排乙方从事有职业危害作业的，应定期为乙方进行健康检查。

第十六条 如甲方违章指挥、强令冒险作业危及人身安全的，乙方有权拒绝，并可以随时解除本劳动合同。对甲方及其管理人员漠视乙方安全和健康的行为，乙方有权要求改正并向有关部门检举、控告。

第十七条 甲方应当建立、健全职业病防治责任制度，加强对职业病防治的管理，提高职业病防治水平。

十、劳动合同的履行、变更、解除、终止和经济补偿

第十八条 甲乙双方按照本合同的约定，依法全面履行各自的义务。

第十九条 除因乙方有胜任工作，甲方可以依法适当调整其工作内容外，变更劳动合同，双方应当协商一致，签订变更劳动合同补充条款作为本合同附件。

用人单位变更名称、法定代表人、主要负责人或者投资人等事项，不影响劳动合同的履行。

用人单位发生合并或者分立或者分立等情况，原劳动合同继续有效，劳动合同由承继其权利和义务的用人单位继续履行。

第二十条 甲乙双方解除、终止本合同，应当按照《劳动合同法》的有关规定进行。

第二十一条 甲乙双方解除、终止本合同，符合《劳动合同法》第四十六条规定应当支付经济补偿的，甲方应依法向乙方支付经济补偿。

第二十二条 甲方违法解除或者终止本合同，乙方要求继续履行本合同，甲方应当继续履行;乙方不要求继续履行本合同或者本合同已经不能继续履行的，甲方应当依照经济补偿金的两倍向乙方支付赔偿金。

乙方违法解除劳动合同，给甲方造成损失的，应当承担赔偿责任。 第二十三条 甲方应当在解除或者终止本合同时，为乙方出具解除或者终止劳动合同的证明，并在十五日内为乙方办理档案和社会保险关系转移手续。

乙方应当按照双方约定，办理工作交接。应当支付经济补偿的，在办结工作交接时支付。

第二十四条 乙方违反本合同约定，经甲方指出后十日内不纠正的，或者甲方董事会认为乙方不能胜任工作而决议不再聘用乙方的，甲方有权单方解除合同，并不承担任何责任。

第二十五条 合同到期或者提前解除后，甲方有权对于乙方经营管理期间的甲方资产进行清产核资，清产核资由中国注册会计师的验证;双方办理移交手续。

十一、当事人约定的其他内容

第二十六条 甲方陈述和保证如下：

1、其是一家依法设立并有效存续的独资公司;

2、其有权进行本合同规定的行为，并已采取所有必要的公司行为授权签订和履行本合同;

3、本合同自签订之日起对其构成有约束力的义务

第二十七条 乙方陈述和保证如下：

1、其保证所提供的个人资料内容的真实性;

2、其具有签订本合同的行为能力和履行合同义务的能力，并且其与甲方签订本合同的行为不会导致甲方因此承担任何对第三方的责任;

3、乙方保证其不具有以下任何一项不适合担任总经理职务的情形：

(1)无民事行为能力或者限制民事行为能力。

(2)因犯有贪污，贿赂，侵占财产，挪用财产罪或者破坏社会经济秩序罪，被判处刑罚，执行期满

十二、劳动争议处理及其他

第二十八条 双方因履行本合同发生劳动争议，可协商解决;不愿协商或协商不成的，可以从争议发生之日起三十日内向甲方劳动争议调解委员会申请调解或从争议发生之际日起六十日内向当地劳动争议仲裁委员会申请仲裁，对仲裁裁决不服的可向当地人民法院提起诉讼。

第二十九条 本合同未尽事宜，按国家及自治区有关法律、法规、规章执行。国家没有规定的，通过双方平等协商解决。

第三十条 本合同一式两份，甲乙双方各执一份。

甲方(公章) 乙方(签字或盖章)

法定代表人(主要负责人)

(签字或盖章) 签订日期： 年 月 日

甲方：

乙方： 性别： 年龄： 籍贯：

身份证号码： 联系电话：

一、合同条件：

1;凡自愿在本酒店工作，年满18岁以上，具有初中以上文化程度，身体健康的公民，经面试合格者。

2;签订本合同前须岗前培训合格，试用期为1个月。

3;凡签订本合同之员工须遵纪守法，无犯罪前科。

二、工资待遇及福利：

1;工资标准为既定标准，根据岗位的不同及个人表现享有岗位补贴，工龄补贴及奖金。

2;每月享有带薪休息日。

3;员工签订合同以后酒店将为其缴纳养老保险金，不愿缴纳养老保险的员工酒店将资补贴的形式发放给个人。

三、合同终止及辞职：

1; 合同期满后，员工可续签合同，不签合同视为原合同的延续。合同期满后要求解除合同者应提前一个月通知酒店，否则视为违约。

2 ;凡经考核不适应本岗位工作者，酒店有权终止其合同。离店时，可结清工资。

3; 工作期间，屡次违返酒店规章制度，造成恶劣影响者将给予开除处理并终止合同;工资奖金一并扣除。

4;酒店员工当保守酒店的各项商业机密;如有泄漏当追究当事人的法律责任。

本合同一式两份，一经签订即生法律效力。双方签字盖章生效，如有违反，均可依法起诉。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

讲明白：

几乎所有公司对新进人员都有试用期。工资要讲清楚：试用期x元，过了适用期后加xx元。不然有些公司在你过了试用期后也不加工资，要等试用期满后半年或一年才“统一”调工资。那等于你的试用期过后就没工资加了，要等统一调整。对你不公平。 别人面试时多聆听：如果有人在你前面面试时，你要多注意听用人单位面试考官提问的内容及透露出的用人单位的基本信息，了解他们关心的重点问题(如文凭、经验、能力等)并提早做出相应的回答对策、对照自己有没有相关资格或能力。掌握他们能提供的条件和福利与别人进行比较或与自己的要求比较是否可接受。

g：面试时如何回答用人单位提出的问题? 以下是用人单位常问的一些问题，你要做相应的准备!

1) 可不可以简单介绍一下你自己? 这个题目是任何一个用人单位都会问的.(可能有些单位会问:你有何优点,缺点,能力等).你要基本上将个人简历上所写的学历,工作经验及实习经验,能力等方面口头方式讲述给用人单位,特别要突出重点:能力,学历,经验.

2) 为何会来我们公司应聘? 你为了表明应征原因及工作意愿，回答时答案最好是能与该公司的产品及企业相关的，最好不要回答因为将来有发展性、因为安定等答案，要表现出有充分研究过企业的样子。

3)你对我们公司有了解吗?这是公司想测试你对公司的兴趣及进公司工作的意愿有多少的问题，如果回答“完全不了解”，那就没有必要再说下去了，最好要稍稍记住公司简介内容及徵聘人事的广告内容，最好的回答就是“因为对该公司的点相当有兴趣所以才来应徵”。

4)对我们公司有何印象? 因为还没进入公司上班，所以主考官也不会太为难你，只要说出在其他公司所没有的感受就可以了，或者说出面试当天的印象也可以。

5)选择这份工作的动机? 这是想知道你对这份工作的热忱及理解度，并筛选因一时兴起而来应徵的人，如果是无经验者，可以强调“就算职种不同，也希望有机会发挥之前的经验”。

6)你认为这份工作最重要的是什么? 叙述工作特性的同时，也要加上自己的看法，如果是有工作经验的人，最好说明自己的基本心态。

7)你认为这个业界的现况怎样? 没必要陈述独创的见解，能传递正确意见便已经足够，如果是异业转行，就不光只是阐述市场的动向更要加上自己的见解才好。

8)如果进入公司的话，想做什么样的工作? 这是招募很多职种的公司最有可能问到的问题，面试者如果不论外勤或内勤都回答“可以”的话，反而会让人怀疑工作态度;如果这家公司只招募一个职种还是被问到这个问题时，是为了确认你有无犹豫，你只要清楚的叙述自己想做的事就可以了，如“现在想在工作方面冲刺，将来则希望能在aa方面努力”等，朝自己想要的目标陈述即可。

9)有取得什么资格吗? 虽然没有强调工作需要某种资格，也有可能被问到这样的问题，往后考虑分发地或能否在新事业发展，这句话都能派上用场，其他或许是想知道你对何事感到兴趣。

10)将来想从事何种职务? 这是针对是否有工作目标及生涯计划，或者在社会上经过一段历练而提出的问题，想试探是否具有经营志向还是职业意图。 11)请告知你的工作观? 常被问到“你的观是什么?”时，可别把它想得太复杂，可回答“为何而工作”、“从工作方面得到了什么”“*年后想变成怎样”等的话。

12)可不可以接受加班? 这是针对“工作热忱”而问的，当然无理的加班不一定就是好的，最好回答“在自己责任范围内，不能算是加班”较有利。

13)你的优点是什么 “你对自己最满意的地方是那里?”与“请做一段自我介绍”意义是相同的，不光是说话内容，连礼貌也都会列入评分项目内，最好加入“朋友曾这样说”等周围的人对自己的看法。

14)现在最热衷的是什么? 可以简述你的兴趣，及这个兴趣带给你个性或能力的正面效果。

15)你希望待遇多少? 常被问到希望待遇时，最好能诚实回答，考虑年龄、经验及能力等客观条件来决定，对某些企业而言，这也是评论你的能力及经验的参考要素，一般要求比前一工作薪水高出百分之十是合理范围。

16) 如果我们公司暂时没办法达到你要求的水平? 你可能要问清楚用人单位的目前能提供的水平，在不相差太大的基础上还是要接受他的目前水平为好。

17)希望工作地点在哪里? 这是有数个分公司及营业场所的企业会问到的问题，有依当事人要求而安排分发他的企业，如果有希望的工作地点，可据实说出来，如:现在虽然希望在营业场所工作，但也可有“将来还是希望能到总公司服务”之类的要求。有些公司在关外有工厂,关内是公司的业务联系点.其实不要特别注重在哪工作,首要的你还是要得到这个机会.

18)何时可以到职? 大多数企业会关心就职时间，最好是回答“如果被录用的话，到职日可按公司规定上班”，但如果还未辞去上一个工作、上班时间又太近，似乎有些强人所难，因为交接至少要一个月的时间，应进一步说明原因，录取公司应该会通融的。

19)除了本公司外，还应征了哪些公司? 很奇怪，这是相当多公司会问的问题，其用意是要概略知道应征者的求职志向，所以这并非绝对是负面答案，就算不便说出公司名称，也应回答“销售同种产品的公司”，如果应征的其他公司是不同业界，容易让人产生无法信任的感觉。

20) 我们为什么要雇请你呢? 有时面试有这么一个问题。话虽简单，可是难度颇高。主要是测试你的沉静与自信。给一个简短、有礼貌的回答："我能做好我要做得事情，我相信自己，我想得到这份工作"。根据自己的实际情况，好好想想吧，看怎么说才具有最高说服力。

21) 你认为自己最大的弱点是什么? 绝对不要自作聪明的回答"我最大的缺点是过于追求完美"，有的人以为这样回答会比较出色，但事实上，他已经岌岌可危了。 22)你最喜欢的大学课程是什么?为什么? 说和你要应聘的职位相关的课程吧，表现一下自己的热诚没有什么坏处。

23)你为什么来应聘这份工作?(或为什么你想到这里来工作?) "我来应聘是因为我相信自己能为公司做出贡献，我在这个领域的经验很少人比得上，而且我的适应能力使我确信我能把职责带上一个新的台阶"应聘者为了表明应征原因及工作意愿，回答时答案最好是能与应征公司的产品及企业相关的，最好不要回答：因为将来有发展性、因为安定等答案，要表现出有充分研究过企业的样子。

24)除了工资，还有什么福利最吸引你? 尽可能诚实，如果你做足了功课，你就知道他们会提供什么，回答尽可能和他们提供的相配。如果你觉得自己该得到更多，也可以多要一点。

25)你为什么辞职?(为什么离开前面那家公司) 千万不要回答:主管对我不好,老板太小气了,公司倒闭了,工作无聊之类的原因,这会让你也失去这个机会的. 你可以适当地作如下回答: 公司要搬到地方, 我想找个更能充分发挥我能力和经验的公司,我想找一份更具挑战性的工作. h:面试时如何向用人单位提出你关心的问题? 如何谈薪酬?这个问题一直是求职和招聘双方洽谈的焦点话题，同时也是个敏感话题。求职者是否可以与面试官大大方方谈薪酬呢?当被问及薪酬问题，该如何回答呢? 举个例：在某场招聘会上，一家公司的招聘官和求职者正进行对话。 “听了你的介绍，觉得你各方面条件和我们的职位要求还是比较符合的。最后我想请问一下，你对薪资的要求是多少?”招聘官问。 求职者支支吾吾了半晌，最后说：“薪资不是我的首要考虑因素，我更看重的是贵公司的发展前景。” “那么好，我们下周一会通知你来公司面试。” 一周后，公司通知复试，复试顺利通过后，面试官让应聘者签约，并告知薪资数目。而此时应聘者表示，公司开出的薪资太低，出乎自己预料，不能接受，最后双方不欢而散。那么这个问题出在哪呢? 很多公司的招聘官都遇到过上述问题。在首次面谈时，很多求职者都诚恳地表示“薪酬不是最主要的，最看好公司的发展，看好公司的培训、晋升机会”，然而等到准备签约时，求职者又会对公司提供的薪酬表示不满，导致双方招聘、求职成本的浪费，让求职者及招聘公司都很苦恼。如今的求职者，特别是大学应届毕业生似乎有个普遍的误解，认为一个优秀的求职者不应该看重金钱，而应更看重事业前途。因此被问及薪酬时都闪烁其辞，但一到真正签约，就因为不得不考虑实际问题而退缩了。 求职者对于“薪酬问题”应该直言不讳。薪酬是求职目标中很关键的一部分，谈薪是求职过程中的重要步骤，完全不需回避。不妨大胆说出你的期望薪酬，当然，这需要恰当的时机。面试一开始便开门见山讨论薪酬不够明智，但可以在被问及时如实回答。若面试官始终没有提到薪酬问题，也可以在对自己成功应聘较有把握的情况下，选个恰当的时机询问。 当然，也不排除有些面试官询问薪酬是“另有目的”。比如他想要了解你是看重薪酬还是企业的发展机会和工作平台，因为一味看重薪酬的人比较容易跳槽。对此，你可以这样回答：“我比较看重该职位的发展和晋升机会，薪资多少并不重要，重要的是我的工作能力和专业知识是不是贵公司所需要的，我是否能为公司赢取更大的利益。”然后顺势将话题由薪金转到展示你以往突出的工作成绩、自身良好的综合素质以及你能为公司做贡献的专业领域上来。

大家好!

大学四年是我一生的重要阶段，是学习专业知识及提高各方面能力为以后安身立命的重要阶段。从跨入大学的校门的那一刻起，我就把这一信念作为人生的又一座右铭。珍贵的四年大学生活已接近尾声，此时回顾自己走过的路，也更是为了看清将来要走的路。个人认为这个世界上并不存在完美的人，每个人都有自己的优点缺点，但关键是能否正视并利用它们。四年来，我不断的自我反省，归纳了一些自己的优缺点。

诚实、热情、性格坚毅是我的优点。我认为诚信是立身之本， 是我今后立身处世的根本。我应该继续保持，并不断以此鞭策自己奋发向上。

我这个人有个特点，就是不喜欢虎头蛇尾。做事从来都是有始有终，就算再难的事也全力以赴，追求最好的结果。在学习知识的同时，我更懂得了，考虑问题应周到，不某全局者，不足谋一时。这在我的毕业论文设计中充分展示了出来。

我个人认为自己最大的缺点就是喜欢一心两用甚至多用。急功近利，喜欢一口气学许多东西，但是贪多嚼不烂，即使最后都能学会，也已经搞得自己很疲劳。如今想想，这样其实并不好，正所谓贵在精而不在广。如果我一段时期内专注于一种学问，不求博但求精，相信一定能更深刻的理解并掌握这门知识。自从我发现自己有这个缺点和问题后，我常常警戒自己，步入社会后也不能一心多用。

通过四年的大学生活，学到了很多知识，更重要的是有了较快掌握一种新事物的能力。思想变成熟了许多，性格更坚毅了。认识了许多同学和老师，建立起友谊，并在与他们的交往中提升了自身素质，认清了自身的一些短处并尽力改正。社会实践能力也有很大提高，为将来走向社会奠定基础。

四年的大学生活是我人生这条线上的一小段，是闪闪发光的一段，它包含了汗水和收获，为我划平人生的线起着至关重要的作用。 就在将要踏出校门的这一刻，我回想起许多在学校发生得事情，有悲有喜、有忧有乐。在这里我的人生作出了又一次得感慨，时间是稍纵即逝的，有机会去实现自己价值的时候，尽量使自己活得更充实、更有意义，付出是显见的，收获总(大一新生自我介绍)是潜见的，但是只要肯去为目标奋斗，收获绝对远远大于付出!

破产姐妹

上映年份：20xx.9.19

《破产姐妹》这部美剧相信很多人都在追。一个破产落魄的千金小姐，一个小饭店里面的女服务员。两个命运不一样，但是有这同样遭遇的两个女孩(一样穷)因为这样那样的巧合住在一起，并且还一起工作。千金大小姐与饭店女服务员经历了互相看不顺眼，到后来达成合作协议。一次偶然的机会，Caroline偶然发现Max有一手烤纸杯蛋糕的绝活，立刻有了一个让两人都摆脱现状的主意筹集到足够的启动资金，她们就能创办自己的烤蛋糕生意。为此，两姐妹开始了梦想的赚钱之旅。

尊敬的各位考官、各位评委老师：

你们好，能参加今天的面试，并向各位考官和评委老师学习，我很高兴。同时通过这次面试也可以把我自己展现给大家，希望你们能记住我，下面我简单介绍我的基本情况。

我叫，今年xx岁。毕业于。我性格活泼开朗，大方热情，乐于助人，平时喜欢阅读、看书和上网流览信息。我曾经在xx学校参加过教学实习，在实习期间我严格按照正式老师的标准来要求自己，进行语文教学和班级管理。我深入学生，和他们相处融洽，和他们一起布置文明教室，开主题班会，组织大家开展篮球赛，参与诗歌朗诵比赛等，学习了语文教学的各种知识，掌握了一定的中学语文教学技巧，也对班主任工作和学生工作有了一定的认识，找到了自己的管理班级的一套方法。同时，在实习当中，身边教师无私奉献的精神和天真、求知若渴的学生们勤奋的学习态度深深地感染了我，我也深深体会到了作为一名 人类灵魂的工程师的乐趣和重要意义，更加坚定了自己做一名教师的决心，成为一名教师也成了我的愿望。

如果，我通过了面试，成为该校教师队伍中的成员，我将继续虚心学习，努力工作，发挥自身所长，为教育事业贡献自己的一份力量，决不辜负 人类灵魂的工程师 这个光荣的称号。谢谢!!!

各位面试官：

大家好!

我是xx大学信息电子系计算机硬件专业的一名应届毕业生，衷心感谢您抽出宝贵时间审阅我的简历。我专长是承接网络工程。DIY组装电脑。软件安装及其维护。还有就是本人还对网络建站，用dreamweaver，通过，PHP+MYSQL做网站网页有专业的特长。又由于我在电脑城附近兼职工作过一年，对一些产品的价格渠道有必须的了解，所以本人能够为公司的采购带给方便及优惠。

在三年的学习生活中，我牢固地掌握了计算机硬件与电子专业的基础知识，精通数电与模电，熟练Office办公软件和Protel99se，对计算机组装与维护把握深刻，并在各种实践中获得了必须的实际运用潜力。并利用课余时间进行了汉语言文学自学考试。在自考期间不但提高了文学功底，而且培养了我坚强的意志。课余时间我还广泛阅读各方面书籍，用心参加各种群众活动和社会实践活动，扩展了知识面，培养了团队精神，增强了组织交际潜力，提升了综合素质。

我虽然缺少工作经验和社会阅历，但我工作认真，对工作提出实实在在的要求，能够按部就班，从不马虎。所以得到老板的赞扬。本人也有过门店管理经验。虽然不长，但是在管理中也得到了深刻的认识。个性是人员交往，处理一些特发事件都有独特的见解，所以我对自己很有信心。