面试外贸主管简历怎么写精选20篇

经理您好!我叫，是个性格开朗的女孩。由于家庭的原因，让我养成了能吃苦耐劳的习惯，我愿意到基层去锻炼自己。在校期间我工作认真负责，一直是老师眼中的好学生。

作为一个工科类的大专生，尤其是女生，我深知自己的不足，不过我的动手能力相对较强，从小理科一直占优势的我头脑灵活，思维敏捷。虽然我仅有一年的相关工作经验，但我相信自己可以胜任此份工作。望您能给我一个展示自己的机会，也给贵公司一个机会。我会好好努力的。

化工进出口贸易合同

合同号码： 86

日 期：

中国化工进出口总公司（以下简称卖方）和株式会社（以下简称买方）双方经

过友好协商，同意按照以下两部分条款签订本合同：

第 一 部 分

一， 商品品名：胜利原油

二， 数 量：吨

（换算原油重量按 gb1884-80方法进行）

三， 规 格： 指 标 项 目 试 验 方 法

① 密度：克/立方厘米 p20°c最高0.920 gb1884-80

② 含硫：重％ 最高0.9 gb 387-64

③ 含水：重％ 最高1.0 gb 260-77

四， 价 格：本合同各交货期的具体价格原则上与86xoil25j号合同，同一交

货期有效的价格一致.

五， 交 货 期：一九八六年第1季度 吨

第2季度 吨

第3季度 吨

第4季度 吨

上述各季度的装船月份由买方选定，但应在各季度前月15日以前通知卖方.

六， 装船口岸：中国青岛港.

七， 目的口岸：日本国港口.

八， 付款条件：买方应于货物装船前十天，按本合同第二部分第三条①款双方商

定的装船数量及期限，通过双方同意的银行开出以中国化工进出口公司山东省分公

司为受益人的，不可撤销的可转让的，可分割的美元信用证.该信用证凭受益人出

具的以开证行为付款人的汇票以及本合同第一部分第九条所规定的各项单据，自提

单日起三十天（包括提单日在内）， 由开证行将货款电汇中国银行. 信用证金额

应按双方商定的交货数量增开5％.信用证上须证明租船提单可以接受.

九， 单 据：①卖方在货物启运后，应向议付银行提供下列单据作为议付货款

的依据：

a） 发票四份；

b） 清洁装船提单正本二份；

c） 由商品检验局出具的质量检验证书，重量鉴定证书及产地证明书各一份.

② 卖方须将上述单据中的清洁装船提单副本二份，随船带交目的港买方

指定的收货人.其余单据副本二份航寄买方.

十， 附 注： ①本合同第一部分各条款尚未规定的事项，应按本合同不可分割

的第二部分的各条款以及由双方随时协商后决定的条款履行.

② 本合同的执行由 商事株式会社开立信用证.

③ 本合同项下的数量双方应努力执行，但如买方或卖方在接货或供货方面有困难

时，双方对本合同的履行均可不承担责任.

④ 本合同第一部分以中日两国文字书就正本一式两份，买卖双方各持一份为证.

两种文本具有同等效力.

卖 方：中国化工进出口总公司 买 方：

地 址：北京西郊二里沟 地 址：

电报挂号：sinochem beijing 电报挂号：

电 传：22243 chemi 电 传：

22553 chemi

第 二 部 分

一， 总 则：本部分条款与第一部分条款在本合同中是不可分割的两部分.

二， 交货条件：①货物所有权及风险的转移，以装港岸上输油臂与油轮集输油管

连接点作为分界线，货物通过该连接点时，由卖方转移到买方，卖方交货责任即告

终止.

② 买方所派油轮，禁止在中华人民共和国沿海水域排放油类或油性混合物.油轮

进港后，应根据港口当局的规定把压舱污水排放在处理池内，费用由买方负担.

③ 买方所派油轮在装货港，应遵守当地行政当局所规定的有关油轮作业安全规则.

④ 买方所派油轮载重吨不得超过六万吨，满载最大吃水不得超过125米.油

轮长度不得大于230米.如买方所派油轮不符合上述规定时，必须事先征得卖方

同意，否则由此所造成的港口当局拒绝油轮靠栈桥，或发生空舱及与此有关的损失

均由买方负担.

⑤ 由于卖方的原因，如在装货港需要移泊或用油驳装货时，其费用由卖方负担.

但由于买方的原因，如需要移泊或用油驳装货时， 其费用由买方负担， 由于人力

不可抗拒的原因，为了确保油轮的安全，装船移泊费用由买方自理.

⑥ 每批装船数量允许增减5％，由买方选择.

三， 装船通知：

① 买方应在装船月15天前电告卖方派船计划，包括船名，预抵装港日期，装运

数量.卖方接到买方派船计划后，应在五天内电复买方接受或可以接受的预抵装港

日期和装运数量.买卖双方对油轮预抵装港日期或装运数量的意见不一致时，双方

协商安排一个都可以接受的日期，装运数量，或者安排另外一些油轮来接货.双方

商妥的油轮预抵装港的日期叫做“确认日期”.

② 买方应按双方商妥的“确认日期”派油轮抵达装港.卖方应及时装货.如买卖

双方因特殊原因要求更改“确认日期”或装运数量时， 对方根据储罐， 泊位和供

货或接货的可能以及油轮安排的可能，应在两天内电复可以接受或不可接受.如油

轮在“确认日期”以前或以后抵达装港，卖方应做出最大努力尽快装货.

③ 买方在本条①款通知派船计划时，已列明预抵装港日期及装运数量，但注明船

名待定时，买方应最迟在确认日期十天前将船名电告卖方.

④ 双方商妥“确认日期”的油轮，允许买方按同一“确认日期”，同一装运数量

和装货港口可以接受的船型另派油轮代替.但买方最迟应在“确认日期”前五天将

代替油轮的船名等有关情况通知卖方.

⑤ 买方在油轮抵达装港前五天电告卖方（包括装港卖方分公司）及装港中国外轮

代理公司预报船名，船籍，预抵装港日期，装运数量，买方应指示船长在油轮抵达

装港前48小时和24小时及6小时向卖方（包括装港卖方分公司）及装港中国外

轮代理公司报告预抵装港的时间.

⑥ 装船完毕后，卖方应在24小时内以电报通知买方：合同号，品名，密度（注

明换算温度），含硫量％，含水量％，船名，收货人，装运数量，发票单价，总值，

提单日，离泊时间.

四， 装货定额：

① 油轮抵达装港后，具备装货条件时，船长通过装港外轮代理公司应在办公时间

内以书面或vhf电话向装港卖方或外轮代理公司提出备装通知书并同时确认.装

船作业开始时间按以下规定计算.

按“确认日期”抵装港的油轮，以确认备装通知书六小时后开始起算.但如在

确认备装通知书后不到六小时装油时，以开装时间起算.

在“确认日期”前一天办公完毕时间（从5月1日至9月30日：18：00，

从10月1日至4月30日：17：00时）前抵装港的油轮，在办完入港手续

后，如有条件提前装油者，以开装时间起算，没有条件装油者，则以确认日上午八

时起算.

在“确认日期”前一天从办公完毕时间至24：00时抵装港的油轮，在办完

入港手续后，如有条件提前装油者，以开装时间起算，如没有条件者，则以确认日

下午二时起算.在“确认日期”以后抵装港的油轮，以开装时间起算.

② 自起算装船作业时间开始，卖方应在36小时内将整船货物装完，除大风雷雨

天气及港务当局另有规定外，应日夜连续装货.

③ 由于下列情况耗费的时间，均不计算在装货作业时间以内：

（一） 由于大风，雷雨等恶劣天气而不能进行作业的时间.

（二） 港务当局由于安全原因不准靠栈桥而在港内停留的时间及港务当局禁止装

船的时间.

（三） 排放压舱污水至验舱完毕的时间.

④ 以拆卸输油管线完毕时间作为装货作业的完毕时间.

⑤ 因码头装货设备故障而发生的滞期费按本部分第五条第①项所规定的运费率的

50％计算.

五， 滞期费：

① 卖方若未能按本部分第四条②款所规定的装货定额时间装货完毕，则卖方应向

买方交付滞期费,滞期费应以双方确认的装船数量作为它的船型,每日滞期费应以

worldscale 所规定的基数（以提单日期为准）乘相应的 afra 运费率计算.

② 油轮在装货港口的动态，以装港外轮代理公司编制的并经船长签字确认的装货

时间事实记录为准，卖方应在装货后三十天内向买方提供装货时间事实记录一份.

③ 买方向卖方提出的滞期费，经卖方审核属实后，应以美元现汇支付.

④ 如果买方向卖方提出滞期索赔，须在船抵目的港后60天内提出.

六， 商品检验：

① 重量的鉴定由装船口岸国家商检局出具的重量鉴定证书为准.提单数量应根据

重量鉴定证书填写.重量鉴定证书及提单所列数量作为买卖双方交货数量的依据.

② 品质的检验：由装船口岸国家商检局按 syb-59 石油产品试样法取样，混

合后分装三份作为卖方所交货物的标准样品.

上述三份样品之中的一份将交给油轮船长.其余二份均交中华人民共和国国家

进出口商品检验局，一份供化验用，一份装货后保存六十天.

国家商检局经化验后所出具的品质证书作为卖方所交货物的品质依据.

七， 投保油污责任险：

① 买方所派油轮应加入基于1969年《国际油污民事责任公约（clc）》第

七条的金额保证（p & i club保险）以及tovalop协定.

② 由买方所派油轮，当在装港遇事故而发生油类和油类混合物的污染或有发生这

类污染的可能性时，船东或船长应迅速采取清除措施，防止油污而造成的损失，或

为避免油污损失进一步扩大所采取合理而有效的措施.但船东或船长不采取上述措

施时，卖方在通知船东或船长之后，可以采取合理的必要的措施进行清除工作和减

轻油污可能造成的损失.卖方应随时将所要采取的措施和后果告诉船东或船长，如

时间允许，应在采取措施前，将拟采取的措施告诉船东或船长.卖方采取的上述措

施可以认为是按船东或船长委托进行的.在这种场合，对于被委托者采取的措施，

委托者有权按实际情况向对方提出异议或者通知其停止工作.委托人提出通知后，

被委托者则应无权再继续进行工作.

③ 卖方或船东船长采取的上述措施均不得与1969年《国际油污损害民事责任

公约（clc）》及tovalop协定的规定相抵触.

八， 人力不可抗拒：如因人力不可抗拒的事故不能按时交货时，卖方可以延期交

货或部分延期交货或取消合同，但卖方应向买方提交由中国国际贸易促进委员会开

具的发生事故情由的证明文件.如因人力不可抗拒的事故不能按时接货时，买方可

以延期接货或部分延期交货或取消合同，但买方应向卖方提交由日本国际商事仲裁

协会签发的证明文件.

九， 罚款：如买方除本部分第八条规定以外未按合同规定执行，以致本合同全部

或一部分不能按期执行，而使卖方遭受损失时，买方应承付罚金，罚金分别为合同

总值或未能执行部分总值的1％.如卖方除本部分第八条规定以外未能全部或一部

分履约交货而使买方遭受时损失，卖方应承付罚金，罚金分别为合同总值或未能履

行部分总值的1％.

十， 仲裁：因执行合同所发生的或者与本合同有关的一切争议，首先应由签订合

同双方友好协商解决.如经协商后尚不能解决，应提交仲裁，不向法院申诉.仲裁

在被告所在国进行. 在中国，在中国国际贸易促进委员会对外贸易仲裁委员会根据

该委员会的仲裁程序规则进行仲裁.在日本，由日本国际商事仲裁协会根据该协会

的仲裁程序规则进行仲裁.仲裁裁决是终局裁决，签订合同双方都应执行.

十一， 本合同第二部分以中，日两国文字书就，两种文本具有同等效力.

尊敬的各位面试官：

你们好!

我叫，毕业于卫校，专业学习护理。非常荣幸有机会站在这里进行应聘自我介绍。

虽然我的学习成绩不是非常好，但我却在学习的过程中收获了很多。首先是我端正了学习态度。在我考进卫校时，本来想解放一下自己的，但是很快我就明白了，卫校的学习是更需要努力认真的。看到周围的同学们拼命的学习，开始了卫校的学习旅程，觉得自己落后了。卫校的学习不象初中那样是填鸭式的，而是老师把课讲完，然后自己去看，去理解。这个时候自习能力和自制能力是很重要的。长期自习以来我知道了要想学好只埋头苦学是不行的，要学会“方法”，做事情的方法。古人云：“授之以鱼不如授之以渔”我来这里的目的就是要学会“渔”，做什么都勤于思考，遇到不懂的地方能勤于请教。在学习时，以“独立思考”作为自己的座右铭，时刻不忘警戒。在学习知识这段时间里，我更与老师建立了浓厚的师生情谊。老师们的谆谆教导，使我体会了学习的乐趣。我与身边许多同学，也建立了良好的学习关系，互帮互助，克服难关。

学习护理单有理论是不行的，还要有良好的护理技术。所以在上实践课的时候我都会争取机会多操作几次，加上卫校本来就少学生可给学生用的空间可不少。所以我可以再趁放学时间多练习一下。

在卫校的第三年是我们到医院实习的时间，基本上一年都是待在医院里学习。再这里我熟练我的护理操作技术，把理论和实践结合在一起，在带教老师的指导下用我全副的耐心和爱心护理病人，使病人得到良好的照顾，早日康复。到医院实习认识到许多也是学习护理的同学，也就增加了与其他同学交流和向其学习的机会，锻炼了自己的交际能力，学到别人的长处，认清自己的短处。所以我喜欢实习。虽然有时会感到累些，但乐此不彼。

我个人认为自己最大的缺点就是喜欢一心两用甚至多用。急功近利，喜欢一口气学许多东西，但是贪多嚼不烂，即使最后都能学会，也已经搞得自己很疲劳。如今想想，这样其实并不好，正所谓，贵在精而不在广。如果我一段时期内专注于一种学问，不求博但求精，相信一定能更深刻的理解并掌握这门知识。自从我发现自己有这个缺点和问题后，我常常警戒自己，步入社会后也不能一心两用。

通过三年的卫校生活，我学到了很多知识，更重要的是掌握了护理操作技术。思想变成熟了许多，性格更坚毅了。认识了许多同学和老师，建立起友谊，并在与他们的交往中提升了自身素质，认清了自身的一些短处并尽力改正。

我的自我介绍完毕，谢谢!

合同双方当事人：

出卖人：________公司，法定代表人：______联系电话：

买受人：______

根据买受人和卖受人在平等、自愿、协商一致的基础上就买卖达成如下协议：

第一条：具体项目出卖金额明细如下

出让人______以出卖方式给买受人______，将属于______位于____________公司，以现金交易形式出让给买受人______，其中所含买卖项目明细如下：

公司土地

公司地块土地面积为____亩，价格______万元/亩，合计：____亩______万元=______万元。

交通用具

1、______轿车__辆：价格____万元/辆，合计金额为：____万元____辆=______万元;

2、______轿车__辆：价格____万元/辆，合计金额为：____万元____辆=____万元;

3、____货车两辆：价格____万元/辆，合计金额为：____万元____辆=______万元;

厂房、办公室合计______万;

燃料____万元;

机械________万元。

以上五项总合计__________万元。

第二条：付款方式及期限

买受人须按以下方式按期付款：

付款方式按总价50%付出，应本人周转经济不到位，现在__年__月__日已付人民币______万元整给卖受人______，在50%剩余款到__年__月__日包括车辆______万一次付清______万元，总价剩余款在__年__月__日付清______万元。

第三条：买受人逾期付款的违约责任

买受人如未按本合同规定的时间付款给卖受人，买受人已付给卖受人所有的款，卖受人有权一律不予退款给买受人，并同时收回本公司的一切财产。

买受人符合本合同约定的付款日期，到时卖受人______按卖公司手续办理全交给买受人______名下。

关于公司所有员工由买受人______处理，包括过户费用一切由买受人______承担。

卖受人：

买受人：

证明人：

年月日

委托办理进出口货物报关合同

合同编号：_________

委托方：_________?（以下简称“甲方”）

法定代表人：_________

地址：_________

邮编：_________

经办人：_________

电话：_________

传真：_________

受托方：_________?（以下简称“乙方”）

法定代表人：_________

地址：_________

邮编：_________

经办人：_________

电话：_________

传真：_________

甲乙双方本着自愿平等、公平合理的原则，经友好协商，就甲方委托乙方办理进出口货物报关事宜，双方一致同意订立以下合同条款，以供双方共同遵照执行：

一、甲方委托乙方办理的进出口货物的具体明细，由甲方另以书面的方式提供给乙方，并应在货物装船前_________?日、装飞机前_________日、船舶抵港前_________日或飞机抵港前_________?日前将以下材料或信息提供给乙方：

1.合同；

2.发票；

3.装箱单；

4.提单、空运单或其他运输单证；

5.提货单；

6.货物的hs编码；

7.贸易性质；

8.手册，批件，如进出口许可证，配额证，免税表，证明等；

9.报关要求及注意事项；

10.报关所需的其他资料。

二、乙方作为甲方的报关代理人，应在甲方的授权范围内进行活动，认真履行职责，维护甲方的合法权益。乙方在代理权限内的任何责任和费用都应由甲方承担。乙方只对因自身的过失与疏忽给甲方造成的直接损失负有责任。

三、甲方需要变更有关报关等事项的，应在报关前提出，并应出具书面的变更通知书。报关后有正当理由需要更改的，甲方应书面委托乙方协助办理。由于变更引起的一切费用和后果由甲方承担。

四、甲方必须保证报关货物不属于国家禁止或者限制进出境的物品。否则，甲方应对由此产生的一切后果承担责任和费用，并对由此给乙方造成的损失负赔偿责任。

五、甲方应保证申报的内容均真实、准确、无欺诈，且与报关单上的内容一致。如委托的内容与报关单有出入，以报关单为准，甲方应承担由于委托内容与报关单不一致而产生的一切责任，并对由此给乙方造成的损失负赔偿责任。

六、甲方有权对乙方的报关行为进行监督，有权要求乙方对于报关进展情况及时汇报。乙方应及时向甲方报告货物的报关、报检及报验等信息。

八、甲方如对海关开征的税额款有异议，应按《海关法》的规定办理，先缴纳后申请减免，手续费自负。乙方应积极协助甲方办理退税手续，手续费由甲方承担。

九、乙方应收取的具体每票业务的报关、报检和报验等费用标准和结算方式，详见《报价及结算单》，《报价及结算单》为本合同的附件，是本合同不可分割的一部分。《报价及结算单》中的内容甲、乙双方可根据情况进行变更，变更经双方书面确认后方可生效。变更生效前所发生的业务，仍按原《报价及结算单》的标准执行。若单票业务的委托书中的费用标准与《报价及结算单》不一致的，按该票委托书中的标准处理本票业务。对于《报价及结算单》和委托书中均没有约定的乙方应_____项目，双方另行协商处理。

十、甲方应按合同的约定履行付款义务，每逾期一天，应向乙方支付未付部分万分之五的违约金。若甲方指定第三方付款的，如第三方拒付、少付、延期付款的，甲方仍有付款义务并承担违约责任。

十一、对于甲方委托乙方代付海关关税、海关监管手续费、代征增值税的业务，甲方应在乙方指定的期限内将该税费付至乙方指定的帐户，最后据实结算，多退少补。其他费用如报关滞报金、船公司、航空公司及货代调单费等按实际发生额收取，甲、乙双方另行结算。

十二、在甲方未按照合同约定支付乙方费用时，乙方有权滞留相应的运输单据或货物，由此产生的所有损失和责任由甲方承担。

十三、由于海关、卫生检疫、动植检部门的审核、查验等原因造成乙方报关、报检、报验等延误的，所产生的疏港费、集装箱超期使用费及其他额外费用均由甲方承担，与乙方无关。

十四、由于海关的原因致使货物被扣押或者报关滞后的，乙方应积极协助甲方同海关进行交涉，由此产生的损失和费用由甲方承担。

十五、如因甲乙双方的过失致使合同不能履行，给双方造成了实际损失，应根据实际情况，由双方分别承担各自的责任。

十七、本合同项下发生的任何纠纷或者争议，双方首先就友好协商解决。协商不成的，提交上海_____委员会根据该会的_____规则进行_____。_____裁决是终局的，对双方都有约束力。

十八、本合同的订立、效力、解释、履行、争议的解决均适用中华人民共和国法律。

十九、本合同经甲.乙双方签字盖章之日起生效，合同有效期为一年。本合同期满之日前，甲、乙双方如无异议，则自动延长一年。任何一方均可在期满前提出终止合同，但应以书面方式通知另一方。

二十、经甲、乙双方协商一致，可对本合同进行修改和补充，修改及补充的内容经双方签字盖章后作为本合同的组成部分。

二十一、本合同一式两份，甲、乙双方各执一份，两份具有同等法律效力。

甲方：_________（盖章）乙方：_________（盖章）

代表：_________（签字）代表：_________（签字）

_____年____月____日_________年____月____日

附件：

一、报价及结算单；

二、双方的营业执照复印件；

三、受托方（乙方）的海关、检验检疫注册证书复印件

I am willing to work in the civil class, hoping to through their own efforts, can learn their own experience, I have a strong sense of self-confidence, self-confidence, a strong sense of initiative and learning heart; work hot pillow positive, careful, hard-working; Knowledge is applied to the work and more knowledge can be learned through work

Be able to work hard, be hard-working, have a strong ability to express and communication skills, good at working with people, team spirit, can quickly adapt to a variety of environments, studious, able to recognize their own strengths and weaknesses to correct and constantly improve themselves.

Extrovert, able to use the computer, summer in the restaurant, sales department and other internship experience, can quickly integrate into society.

Able to complete their own things, speaking and listening ability is very confident. Have a keen insight into things; be able to communicate well with people, with team spirit; responsible for the work will pay all the energy and enthusiasm to develop well-planned, and strive to achieve in the shortest possible time; like challenges, A shorter time to adapt to high-pressure work. Because they love Japanese, the university has filled in the Japanese major, hoping to engage in Japanese-related work.

大学应届毕业生求职面试自我介绍

我虽然缺少工作经验和社会阅历，但我工作认真，对工作提出实实在在的要求，能够按部就班，从不马虎。接下来，小编在这给大家带来大学应届毕业生求职面试自我介绍，欢迎大家借鉴参考!

大学应届毕业生求职面试自我介绍1

各位考官好：

今天能够参加这场招聘会的面试，能有机会向各位考官介绍我自己，我感到非常荣幸。

我叫今年XX岁。希望通过这次面试能够展示自我，提高自我。我的最高学历是大学本科。我平时喜欢看书和上网浏览信息。我的性格比较开朗，随和。能关心周围的任何事，和亲人朋友能够和睦相处，并且对生活充满了信心。我以前在X单位实习过，所以有一定的实践经验。在外地求学的四年中，我养成了坚强的性格，这种性格使我克服了学习和生活中的一些困难，积极进取。

如果我有机会被录用的话，我一定能够在工作中得到锻炼并实现自身的价值，争当人民公仆，做合格的员工。同时，我也认识到，人和工作的关系是建立在自我认知的基础上的，我认为我有能力也有信心做好这份工作。

公务员是一个神圣而高尚的职业，它追求的是公共利益的最大化，它存在的根本目的是为人民服务，为国家服务。雷锋说过：人的生命是有限的，而为人民服务是无限的，我要把有限的生命投入到无限的为人民服务当中去。这也是我对公务员认知的最好诠释。

俗话说：航船不能没有方向，人生不能没有理想，而我愿成为中国共产党领导下的一名优秀国家公务员，认真学习“三个代表”，“八荣八耻”，全心全意的为人民服务。所以，这份工作能够实现我的社会理想和人生价值，希望大家能够认可我，给我这个机会!

大学应届毕业生求职面试自我介绍2

我是xx学院临床医学院临床专业xx级本科学生，将于xx年7月毕业。在即将叩响社会这扇大门时，我怀着无比的真诚和高度责任感把我的人生向您靠拢。五年的大学生活使我树立了正确的人生观，价值观，形成了热情、上进、不屈不挠的性格和诚实、守信、有责任心、有爱心的人生信条。五年，厚积薄发的五年，给我的“轻叩柴扉”留下一个自信而又响亮的声音。

以上是我的求职面试自我介绍。在即将走向社会之时，诚望贵单位全面考察我的情况，若能蒙您垂青，我将深感荣幸，并在日后工作中，不懈拼搏之劲，不失进取之心，克尽己能，为贵单位事业奉献自己的一份力量。

相信在您们的支持下，我会和您所领导的单位一样，直挂云帆济沧海，乘风破浪会有时!

大学应届毕业生求职面试自我介绍3

您好，我叫，来自xx大学xx学院，我的专业是国际经济与贸易。主要课程有：国际经济学、国际贸易实务、国际金融、国际投资、国际商务谈判、国际商务函电、国际结算、国际市场营销、财经英语，剑桥商务英语、货币银行学、财政学、财务管理学、会计学、证券投资学、国际物流管理、管理学、报关综合实务等。此外，还学了高等数学、大学英语等课程。

我性格开朗，善于与人沟通，喜欢交际，而且适应能力、自学能力都很强，而且我有很强的上进心，有不服输的精神。能吃苦耐劳，知难而进迎难而上。

我的工作经历有：

xx年5月在促销牛奶。因为促销地点是在小区，使我有机会面对不同年龄阶段的顾客，有老年人，有中年妇女，甚至还有小孩，促销过程中，我知道什么叫做耐心，什么叫做积极主动，几天下来，销量都很不错，得到公司的好评。

xx年10月在xx市通讯xx店促销手机，由于工作突出，得到奖金嘉奖。

xx年暑假在化妆品经营店兼职，由于培训中表现突出，还被派跟从领导去做促销，而且还负责带领大家学健美操。促销活动中，我还负责上台表演。整个做兼职的过程中都得到领导及员工的认可。

xx年7月，去xx企业实习，实习过程中，有报关部、报检部、贸易进出口部、仓储部、船代部等部门代表来给我们培训，使我对这方面有更深的了解，而且还有机会到各部门去实践，理论联系实际，我熟悉了各种贸易单证及银行各个单证的填写。

xx年9月，开学期间在各个学校促销联通手机卡，不能说我促销能力很好，可从第一天赚到35元到后面一天能赚到200元，从中可以看出我个人的适应能力及改变自我、提高自我能力很强。

xx年3月，在xx县边贸局实习。实习过程中，我主要协助领导整理统计靖西县各个贸易公司的进出口贸易情况，而且还负责在电脑上画表格填制表格。

我不敢保证我一定能做得最好，但是，只要能给我一个机会，我相信以我个人的能力以及我拥有的毅力，我相信我不会让公司失望，不会让公司的领导失望!

过去的成绩也只能代表过去，并不能预视未来，今天以及未来的成就才是我所期待的，相信也才是公司各个领导所期待的!

大学应届毕业生求职面试自我介绍4

各位面试官：

大家好!

我是xx大学广告设计专业的应届毕业生。大学期间曾经在暑假期间在广告公司实习，能够很好得配合其他员工的工作，认真踏实，对工作是绝对的认真负责;对于不懂不熟之事肯付出努力不断学习与练习，不怕吃苦;期间还独立完成一次项目，受到公司同事和领导的好评。

对于自己有较清醒的认识，不会夸大其词，自吹自擂，能恪守以大局为重的原则，愿意服从集体利益的需要!

请领导给予一次机会，我会用实力来证明自己!谢谢!

大学应届毕业生求职面试自我介绍5

尊敬的领导：

您好!

我毕业于x学院财务管理专业，大学本科学历，大学期间学习了财务、会计相关知识，如财务会计、财务管理、成本会计、统计学、税法、经济法等相关课程。

大学期间曾经获得国家励志奖学金、校级二等奖学金等荣誉，熟悉财务相关知识，考取了会计资格证、初级会计资格、证券从业资格五科、市场营销经理助理等证书，希望可以学以致用，实践与理论相结合。

我具有较强的学习能力和吃苦耐劳的特性，可以很快地融入新环境，希望可以得到一份适合自己的工作。

我会认真对待自己的工作，尽力做到不断进步。谢谢!

各位考官,上午好!

通过考试,今天,我以优秀的成绩顺利进入了面试.对于我来说,这次工作机会显患上尤为珍贵.

我叫*,本年27岁.*年7月我从*学院*系毕业.我叫,来自广西南宁,20xx年毕业于广西银行学校金融专业.毕业后在工商银行南宁支行工作1年,后又在南宁市商业银行工作过一年的时间.人往高处走,水往低处流.前两份工作因没有太大的发展潜力,故我辞去工作,以谋求更好,更有发展前途的工作.

今天,我想通过此次考试重新走上银行岗位的愿望是那样迫切!我家共有三姊妹,两个姐姐在外做工,为了照顾已经上了年纪的怙恃,我一直留在她们身边.我曾经开过铺子,先是谋划工艺品,后又谋划服装.但不论生意做患上如何驾轻就熟,当一名银行职员终是我心神驰之并愿倾尽终生一生没世心血去寻求的事业.

我曾经屡次到场考试,但都因为各种原故而未能使成为事实胡想,但我违地里刻意,只要有机会,我就一直考下去,直到抱负使成为事实为止.如今的我,历经糊口的磨练,比起我的竞争对于手在年龄上我已经再也不有优势,但是我比她们更多了一份对于工作的责任心、耐心以及对于单元的诚心,更多了一份成熟以及自傲.

银行职员这个生业是神圣而伟大的,他要求我不仅要有丰富的专业常识,还要有高尚的情操.因此,在书时,我就十分注重自身的周全成长,广泛地培养本身的兴趣爱好,并学有专长,做到有专业以及专长(历数本身的专长),倘使,我通过了面试,成为众多银行职员步队中的成员,我将不停起劲学习,起劲工作,我认为我可以很好的胜认贵行一职.谢谢!

订立合同各方：___________

培训单位：___________ 学院(或学校)，以下简称甲方;

委托培训单位：___________ ，以下简称乙方;

学生：___________ ，以下简称丙方。

为了开辟人才培训的渠道，加速智力开发，保证受培人员的质量，明确培训各方的责任，为社会主义现代化建设提供更多更好的人才，经甲、乙、丙三方协商一致，特订立本合同，以便共同遵守。

第一条 甲方对丙方的授课内容，应按照教育部对同类本科生(或大专、中专生)所规定(部属学校按其系统的有关规定)的科目、学时安排，不得降低对丙方的要求。甲方对丙方在校期间的德、智、体发展情况，应于每学期末向乙方作一次详细介绍。

第二条 甲方如发现丙方有违反校纪校规的行为，应及时与乙方取得联系，共同研究处理办法，丙方在期末思想品德评为"差"等、学期内有三门功课不及格，一年之内有两门功课补考不及格者，甲方有权劝其退学或取消其学籍。

第三条 甲方负责丙方奖学金的评定和发放。奖学金每学期评定一次、分一、二、三等，具体评定和发放方法、标准，按甲方的统一规定办理。

第四条 乙方承担丙方在校学习期间的全部学费和奖学金费。学费每人每学期 _______元，奖学金每人每学期 _______元，其它费用每人每学期 _______元。丙方的以上费用，乙方应于每学期学生报到时直接汇到甲方，或由丙方带交给甲方。

第五条 乙方应按规定发给丙方工资(标准工资加地区生活费补贴，不发奖金)和其它福利待遇，丙方如在甲方食宿，乙方按规定每天补助丙方生活费 _______元(如国家有新规定，按新规定执行)，向甲方支付丙方的寄宿费和代伙费。两方节假日回家的来回路费，乙方按规定给予报销。丙方如不在甲方食宿，其家离甲方两公里以上，乙方应按国家规定按月发给交通费补贴。

第六条 乙方要加强对丙方的管理和教育，要经常了解丙方的学习和思想品德状况，如发现丙方有问题，应及时配合甲方教育和处理。

第七条 丙方学习结束，经甲方考核、考试合格准予毕业后，乙方应根据丙方所学专业和甲方提供的丙方德、智、体发展情况，合理安排其工作。

第八条 丙方必须自觉接受甲方和乙方的教育和管理，努力学习，遵纪守法，从德、智、体三方面全面发展，争当"三好学生"。丙方如违反校规校纪，要自觉接受甲方和乙方的处理。丙方如中途退学，或被甲方劝其退学或取消学籍的，应承担向甲方交付的各项费用，丙方如不交付，乙方有责任代丙方交付。

第九条 丙方学习结束经考核、考试合格准予丝业后，必须到乙方单位工作，一般在 内不得调出调离乙方单位。丙方如因特殊情况必须调出，必须符合上级的有关规定，经乙方同意后，方可办理调离手续。丙方如毕业后不回乙方单位工作，或回乙方单位工作不到 要求调离工作的，应向乙方偿付丙方在校期间乙方支付的各类费用和工资。

本合同自甲、乙、丙三方签字之日起生效，于丙方学习期满毕业后自行失效。

甲、乙、丙三方均不得擅自修改或解除合同。合同中如有未尽事宜，须经三方共同协商，作出补充规定。补充规定与本合同具有同等效力，但不得与本合同内容抵触。

本合同正本一式三份，甲、乙、丙三方各执一份;合同副本一式 份，交 _______市教育局......等单位各留存一份。

学院或学校(甲方)：___________ (公章)

代表人：___________ (盖章)

电 话：___________

银行账户：___________

乙方：___________ (公章)

代表人：___________ (盖章)

职务：___________

电话：___________

银行账户：___________

丙方：___________ (盖章)

单位职工或干部。

应聘总经理助理工作计划范文

总经理：

您好!

很荣幸能成为公司的一员。能为银盾做一些力所能及的工作，我深感荣幸。

从面试至今，来公司上班已将近一周了，感谢您对我的赏识，以及在百忙之中抽出一天宝贵的休息时间陪我去生产一线，使我对企业情况有更深一步的全方面了解。

结合一周以来我对公司的了解，针对公司现状提出以下几点，仅供参考：

1、公司一周时间没有开展过一次例会，老板工作忙、累，员工感觉不到，没有为其分忧解难的意识(缺乏团队凝聚力，员工不知道老板想什么，老板不知道员工做什么，工作任务有待明确，工作进度有待监督)

2、上班时间部分员工工作激情不高，没有对本职工作钻研及做精的概念，自身学习能力不够强，处于一种被动状态(建议完善制度、制订奖罚制度，激发员工工作积极性);

3、员工数字意识不够强，缺乏竞争意识(第一时间提供不出与本岗位相关的文件数据;建议后期针对不同的岗位在保证工作的前提下，开展岗位学习培训和岗位关键数据的规范化工作)

4、生产车间：

①厂长基本掌握了车间所有技术及全部事物的处理能力(人员储备不足、规划缺乏合理性;避免因厂长的离职使公司生产系统进入瘫痪状态;只发展提高一个人的能力是有限的，尤其是技术性人才的培养)

②车间半成品积压情况严重(底座两万多、筒八千多。造成场地的不足和生产工人把多数精力集中在半成品的堆放上，未能全部投入到生产，物料把控不够严格)

③车间布局及规划的合理性，建议与厂长沟通后做具体的调整

④仓库呆滞物料多，物料堆放混乱(建议消耗库存，减少原材料积压造成的成本积压和资源的时效性折扣，造成无谓的成本浪费;建议仓库管理实施分类堆放，制作物料标识卡明确物料名称、规格型号及数量)

⑤厂区6s的执行不够到位(整理、整顿、清洁、清扫、素养以及技术型员工的培养不够到位，车间现场有烟头安全问题值得深思。建议健全惩罚制度及监管力度同时要求厂长多做此方面的宣讲)

⑥生产技术工艺工序标准的制定与维护比较缺乏，建议制订完善针对上述现象，本人制订了一份相应的阶段性个人工作规划如下：一、生产周期流程梳理、组织架构搭建及确立

二、人员岗位定编及岗位职责梳理

三、erp系统搭建并完成阶段性试运行(包括软件厂家的选择、协议的签订、根据物料及现有情况实地调试)

四、根据现有情况制订人员招聘计划

五、针对不同岗位情况制定出相关人员的岗前培训工作

六、主抓生产产量产能，全力提高生产效率

八、在日产量保证的前提下主抓生产品质

七、结合实际情况制定厂区奖惩制度

八、在生产配置齐全，产能与下单计划相协调的前提下，主推erp系统。

九、制定公司管理制度、部门制度及监督意见并做前期宣讲

十、公司制度推行与维护

十一、公司制度修改与完善

最终达到：

① 公司各工序运营顺畅，生产环节勤沟通并保证能根据订单生产，达到依订单交期按时完成销售订单生产确保发货;

② 各部门以数据报表形式把前一日部门关键数据在规定时间内向总经理汇报，必要时由部门长监督员工制作日工作计划及工作总结，erp系统运行维护正常，数据管理完善;

③ 至少每周开一次会议议题为：上周工作总结和下周工作计划的明确包括一些难点和问题的反馈;

④ 各部门人员配置齐全择优提拔，各尽其责公司正常运转，并在业务上有新方向的拓展战计划;

⑤ 销售能主动开发新客户维护老客户;

⑥ 建立健全公司资料库、数据库信息：供应商信息、客户信息、技术资料、人事档案及人才的培养方针。

上述内容只是一个简短的概述，根据我以前工作的长期实践经验，我有信心把上述计划结合公司现在的情况实践并执行，并不断地完善，甚至于完美。为了公司的20xx年在各方面都有所突破，希望能得到您的支持与信任，以便更好的开展后续工作。

给我一个舞台送您一场好戏，期待您的回复!

尊敬的领导：

您好!

我毕业于x学院财务管理专业，大学本科学历，大学期间学习了财务、会计相关知识，如财务会计、财务管理、成本会计、统计学、税法、经济法等相关课程。

大学期间曾经获得国家励志奖学金、校级二等奖学金等荣誉，熟悉财务相关知识，考取了会计资格证、初级会计资格、证券从业资格五科、市场营销经理助理等证书，希望可以学以致用，实践与理论相结合。

我具有较强的学习能力和吃苦耐劳的特性，可以很快地融入新环境，希望可以得到一份适合自己的工作。

我会认真对待自己的工作，尽力做到不断进步。谢谢!

尊敬的面试官：

大家早上好!

我是来自某某交通大学市场营销专业的某某某。我喜欢读书看报，因为它能丰富我的知识;我喜欢跑步，因为它可以磨砺我的意志，我到底是个什么样的人呢?我是一个活泼开朗、热情、执着、有坚强意志的人。既然今天竞聘的是营销经理一职，我想谈谈自己对营销的理解。

营销不等同于推销，但推销是营销的重要组成部分。要想做好营销工作，首先就要做好自我推销。让一个陌生人信任自己是有一定难度的，但只有客户相信可以，才会相信自己的产品，才能更好的将产品推入市场。我想“做人，做事，做生意”大概就是这个意思吧!

我觉得作为一名营销经理，除了应该具备一定的营销知识外，还应具有良好的沟通、协调能力，能够吃苦耐劳，具有良好的团队合作精神，讲究职业道德。身为班长的我，在三年的时间里，组织了班级各种各样的活动。通过组织这些活动，提高了自己的组织协调能力，加强了团队合作意识。

同时也让我充分认识到，个人的能力毕竟很有限，只有通过团队合作，集思广益，取长补短，才能更好的完成工作。如果这次我有幸竞聘上营销经理，我想打造一个平台，让自己的同事在一种轻松却不失严谨的氛围中工作，大家相互合作，具有良好的团队精神。

各位老师：

早上好!

非常荣幸能参加这次面试，我是×××号考生，报考的(de)职位是×××，希望通过这次面试能向各位老师学到更多东西。

我来自美丽的(de)海滨城市××，今年24岁，是××大学××专业本科的(de)应届毕业生。闽南的(de)山水哺育我长大，我的(de)血液里流淌着闽南人特有活泼开朗的(de)性格和爱拼才会赢的(de)打拼精神。带着这种精神，在校期间我刻苦学习，不负众望分别获得01-20xx年度二等奖学金，03-20xx年度和04-20xx年度三等奖学金，用实际努力报答父母和师长的(de)养育之恩。

除了学习之外，我还积极参加各种社会实践活动。我曾担任班级的(de)宣传委员，组织了几次班级和学院的(de)公益活动：如青年志愿者助残活动，向孤儿院儿童献爱心活动等。组织这些活动以及和活动中和成员的(de)相处让我学到了很多东西，对培养自己的(de)能力和人际关系的(de)处理有很大的(de)好处，为我更快的(de)走向社会提供了良好的(de)平台。

此外，计算机和篮球是我业余最大的(de)爱好，我计算机过了国家2级，除熟悉日常电脑操作和维护外，还自学了网站设计等，并自己设计了个人主页。我是班级的(de)篮球队主力，我觉的(de)篮球不仅可以强身健体还可以培养一个人的(de)团队精神。

回顾自己大学四年的(de)工作学习生活，感触很深，但觉的(de)收获还是颇丰的(de)。掌握了专业知识，培养了自己各方面的(de)能力，这些对今后的(de)工作都将产生重要的(de)帮助。除此之外，也应该看到我的(de)一些缺点，如有时候做事情比较急于求成，在工作中实际经验不足等等。但“金无足赤，人无完人”每个人都不可避免的(de)存在他的(de)缺点，有缺点并不可怕，关键的(de)是如何看待自己的(de)缺点，只有正视它的(de)存在，通过不断的(de)努力学习才能改正自己的(de)缺点。今后我将更严格要求自己，努力工作，刻苦学习，发扬优点，改正缺点，开拓前进。

这次我选择这个职位除了专业对口以外，我觉的(de)我也十分喜欢这个职位，相信它能让我充分实现我的(de)社会理想和体现自身的(de)价值。我认为我有能力也有信心做好这份工作希望大家能够认可我,给我这个机会!

卖 方：____________________________________

地 址： 邮编：____________ 电话：____________

法定代表人：____________ 职务：____________

乙 方：____________________________________

地 址： 邮编：____________ 电话：____________

法定代表人：____________ 职务：____________

经卖买双方友好协商一致同意成交下列商品，订立条款如下，共同遵守：

1.商品：________________________

2.规格：________________________

3.数量：________________________

4.单价：________________________

5.总价：U.S.D(大写：)________________________

6.包装：________________________

7.装运期：________________收到信用证后____ 天。

8.装运口岸和目的地：从____________经____________至____________.

9.保险：________________________

10.付款条件：________________________

(1)买方须于 年 月 日前将保兑的、不可撤销的、可转让、可分割的即期信用证开到卖方。信用证议付有效期延至上列装运期后____ 天在____________到期。

(2)买方须于签约后即付定金________%。

11.装船标记及交货条件：货运标记由卖方指定。

12.注意：开立信用证时请注明合同编号号码。

卖方：

代表：____________

买方：

代表：____________

签订日期： 年 月 日

我是一名毕业于x大学的应届毕业生，在学习上，有着扎实的专业基础，勤奋好学，态度端正，通过国家英语4级及计算机2级。在工作上，认真负责，有较强的组织能力，自己常参加各种学生工作来培养自己的工作能力。工作踏实，任劳任怨，责任心强，积极配合上级的任务。在生活上，养成良好的生活习惯。注重扩张自己的兴趣与爱好，锻炼自己的沟通和组织能力。希望尽自己最大努力为公司创造最大利益。

自学能力很强,在校自学了很多计算机知识,能熟练组装计算机，懂得计算机的维护，熟练操纵windows、office办公软件，熟悉interne资源。会auto cad photoshop等软件;会用c语言编写一般程序。

专业知识扎实，有积极的工作态度，能够独立工作，又极赋团队精神，同时具有良好的文化素质;赋有进取心，有良好的职员治理和沟通协调能力。

建筑项目经理聘用合同范本

建筑项目经理聘用合同范本

甲方: (以下简称甲方)

法定分代表人：

地址：

乙方: (以下简称甲方)

身份证：

住址：

甲方聘用乙方为建筑施工地现场项目经理，为确保建筑工程目标的顺利实施，明确责任，双方签约如下：

一、工作范围:

乙方在甲方授权负责的 工程项目施工管理，并有义务配合甲方竞争相应的工程项目，甲方可根据工程需要调配乙方的施工项目，

二、工程期限:

以甲方与建筑单位签订的建筑工程合同期限为准，聘用工作期限为一年，当工期超过一年时，本合同自动顺延至工程完工，超过聘用期限的薪酬按月平均工资乘以超过聘用期限的月数予以计算，或者双方对超过聘用期限的工资另签协议。

三、工作要求:

建筑工程的工程合格率、工程优秀率以甲方与建筑单位签订的建筑工程合同为准。重大伤亡事故为零。

四、工作形式:

1.甲方授权乙方,以甲方与建筑单位签订的建筑工程合同为依据,由乙方负责该项目工程的全部施工生产管理事宜。乙方无权向建筑单位提款及改变资金去向。乙方无权代表甲方购材料。

2.乙方的工资计算、发放:

乙方实行年薪制，年薪为 万元人民币，工资的发放时间是与建筑单位签订的合同履行结束后。

五、风险抵押金:

介于甲、乙双方系有亲属关系的中间人介绍，甲方对乙方比较信赖，甲方不要求乙方直接缴纳风险抵押金，而是从工资中扣除 万元作为风险抵押金，合同终止时,如不发生违约事项,本金一次性发放给本人。

六、甲乙双方的权利、责任和义务:

1.甲方的权利、责任和义务:

1)要向乙方传达贯彻工程施工地的政策、法律、法规，引导和规范施工队走上法制化、规范化轨道,保证经营者合法权益,支持乙方依法在甲方授权范围内的经营自主权。

2)按规定交齐平帐票据后由甲方为乙方开据发货票。

3)设工程监督员参加乙方项目工程和施工生产的决策,并经常深入施工现场检查工程进度和质量。

4)督促检查乙方执行甲方各项规章制度情况。

5)甲方各部门要积极为乙方施工生产服务。乙方对甲方人员的推、拖、卡、要行为乙方有权予以抵制并向总经理报告。

2.乙方的权利、责任和义务:

1)为确保工程项目工期从 到 如期竣工各计划明细(进度计划、劳动力计划、用料计划、质量计划、安全目标)报公司及在办公室上墙;

2) 确保工程项目安全目标达到无隐患(随检随查，人身安全，电源设备，防火安全，高空作业)确保生产安全，人身安全事故控制值为零;

3) 确保对内与公司领导、对外与各有关单位沟通及时到位(“及时”是第一时间，“沟通到位”是重在解决问题);

4) 确保工程项目现场文明施工(不随地乱扔杂物、乱堆乱放，做到工完场清)树立公司形象;

5) 工程施工中发生的增项增量及技术变更、签证，要及时收集、整理并向公司汇报。施工前，签证最迟时间不允许超过3天，超过3天视为工作不到位，在工程结束后要按其程度扣工资的10%;

6) 现场施工合理用料，减少用料损失率，根据使用材料不同，材料损耗率控制在2%——5%，超出部分由项目经理负责;

7)因项目经理个人失误和人为虚假论证造成的损失，项目经理负连带责任。

七、奖惩规定

1、采用新技术、新工艺、新方法施工，有创新或具有示范效应，视具体情况或创造的经济效益，给予项目经理奖励 元;

2对超额完成计划，增加公司经济收益的项目经理，给予奖励 元人民币;

3、由于自身管理等原因，被建设单位投诉一次，给予项目经理 元的处罚;

4、出现的突发事件，项目经理未能及时果断处理，造成企业重大损失或因管理不善或决策失误，严重损害企业信誉度或造成企业巨大经济损失的，将给予项目经理 元人民币的处罚;

八、违约责任。

违约一方给另一方造成的经济损失,应由违约一方赔偿另一方。双方都有责任的,各自责任范围内的承担。乙方在施工过程中违约甲方可以扣取风险抵押金、责令乙方整顿、停工直至解除合同。

九、争议的解决

1)甲乙双方本着友好的原则进行协商解决。

2)可直接向濮阳市华龙区人民法院进行诉讼。

十、本合同经双方签字后生效，合同未尽事宜双方可协商解决，也可签订补充协议，补充协议是本合同的组成部分，与本合同具有同等的法律效力。

十一、本合同与上级文件有抵触时按上级文件执行。

十二、其它事项。

本合同一式两份甲乙双方各一份。甲方与建筑单位的合同由甲方保存。乙方可留复印件以备查阅。

甲方: 乙方:

联系方式: 联系方式:

年 月 日 年 月 日

国际秘书节是每年四月的最后一个完整的星期的周三。20xx年,亚商在线首次将“秘书节”引进中国。

一、秘书工作的内容 一般秘书的工作内容，在我国政府机关与企事业单位，一般秘书的工作内容概括起来就是既要执行政务，又要处理事务。秘书三办：办事、办文、办会

定义：秘书是在授权范围内，辅助领导实施综合管理和处理日常事务的专业人员。

二、秘书的职业特征[两性三化] 1.服务的直接性 2.服务的稳定性 3.知识化 4.年轻化 5.女性化 三、秘书工作的要求 “三个服务” 1.为领导服务。2.为职能部门服务。3.为员工服务。 ----现代秘书 四、秘书工作的特征 ：辅助性、综合性、服务性、机要性 五、秘书工作的作用：助手作用、参谋作用、协调作用、枢纽作用、公共关系作用

第二节 秘书的素养

一、秘书的知识结构 知识结构，是指人们所学的知识在头脑中的有机联结与组合，也是一个人知识层次的构成的情况。知识结构是一个开放的、不断更新的体系，即对内可以自我调节、对外可以不断适应的体系。 秘书所应具备四方面知识的纵横结合，结构可用罗马字母“Ⅱ”来表示。秘书的知识结构应当具备专与博的兼容性.基础知识、专业知识、行业知识和相关知识

二、秘书的能力 写作能力、口头表达能力、听知能力、阅读概括能力、社交活动能力、协调能力、观察分析能力、应变能力、使用先进办公器械的能力、预测能力

三、秘书的职业道德----“忠诚保密” 我国秘书职业道德的基本传统 以“忠、信、义”为灵魂，中国传统的秘书在具体职业行为中就常常表现为甘为幕后，甘当无名英雄，把辅佐对象的事业当作自己的事业。“鞠躬尽瘁，死而后已”，成为他们职业生涯的真实写照。 现代秘书职业道德的基本内容 ：

1.忠于职守，爱岗敬业

2.恪守信用，严守机密 职业秘书保守秘密既是一个职业伦理和职业道德范畴的问题，同时也是一个遵纪守法的问题。

3.遵纪守法，廉洁奉公

四、秘书的心理素质 (一)秘书的心理 1.广泛的兴趣 2.坚韧的意志 3.稳定的情绪 4.缜密的思维 5.非凡的记忆 秘书的心理障碍 1.自卑心理 2.高傲心理 3.盲从心理 (二)秘书心理素质的培育 1.气质与职业：胆汁质、多血质、粘液质、抑郁质。 2.气质与性格: 3.秘书的性格：开朗 敏捷 稳健 坚毅 幽默 自制

五、秘书的智商IQ和情商EQ

秘书的智商 秘书的情商，情商是指人在情绪、情感、意志、受挫力等方面的心理品质。 (一)自我意识 (二)自我激励 (三)情绪控制 (四)人际交往 (五)对挫折的承受力 IQ决定录用 EQ决定提升。

尊敬的面试官：

大家好!

我叫，来自xx市，现在就读于xx大学，专业是化学工程与工艺，出身xx山区的我从小养成了勤劳务实，不怕吃苦的习惯，在大学的三年中，我掌握了扎实的理论知识，并培养了较强的实践能力，我的大部分学习时间都是在图书馆中度过的，养成了自学的好习惯，学习期间获得三等奖学金和计算机等级证书，在大一时，先后加入了环保协会，青年志愿者协会，在几次活动中使我得到锻炼，并利用周末时间做家教和电脑促销员，使自己得到工作经验的同时也补给了生活费.生活自理能力比较强，这次来到这里面试，希望大家给我一个机会，让我能与大家一起共创辉煌!谢谢!

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

尊敬的领导：

挚地向您推荐自己!我叫李连青，是莆田学院小学教育专业20xx届即将毕业的一名专科生，我怀着一颗赤诚的心和对事业的执着追求，真诚地向您推荐自己。

正直和努力是我做人的原则;沉着和冷静是我遇事的态度;爱好广泛使我非常充实;众多的朋友使我倍感富有!我很强的事业心和责任感使我能够面对任何困难和挑战。

作为一名即将毕业的学生，我的经验不足或许让您犹豫不决，但请您相信我的干劲与努力将弥补这暂时的不足，也许我不是最好的，但我绝对是最努力的。我相信：用心一定能赢得精彩!

我是某某学校某某专业某某年级学生，毕业将至，又一个新开始即将来到，等待着我继续努力奋斗、迎接挑战。时光飞梭，将带着童年的梦想、青年的理想离开学校，走上工作岗位。大学四年是我思想、知识结构及心理、生长成熟的四年。惠于理工大学的浓厚学习、创新氛围，熔融其中四年使我成为一名复合型人才。

在大学四年是我思想、知识结构及心理、生长成熟的四年。

在大学期间，我认真学习专业技能，掌握了较强的专业知识，并把理论知识运用到实践中去，获得某某年某某月暑期“三下乡”社会实践活动论文一等奖和某某年某某月湘潭市第四届大学生科技创新竞赛一等奖。此外，我还加入了院学生联合会和学生通讯社。在院学生会期间，表现突出，由干事被选拔为院社团联合会管理部副部长，后来，转而做学生通讯社负责人，作为新校区学生通讯社的负责人，负责新校区学生通讯社的组建工作。在院党委宣传部的指导下，经过南北校区同事的团结努力，从无到有，成功地组建了新校区学生通讯社，并在接下来的一年中，又成功地组织了三校区学生通讯社记者培训工作，三校区学生通讯社辩论赛。在此期间，由于工作努力，表现突出，被院党委宣传部评为“优秀学生干部”。

大学三年级，我以优异的成绩与表现，光荣地加入了中国共产党。加入这个先进的团体，是我人生的一次升华。在保先教育中，我更是严格要求自己，带领身边同学，一起进步。曾获精神文明先进个人称号。在参加义务献血后，让我更加懂得珍惜生命，热爱生活。假期中，我根据专业特长，在电脑公司参加社会实践，这对我的经验积累起到了极其重要的作用。考取了机动车驾驶执照(C型)。对即将步入社会的我，充满了信心。“长风破浪会有时，直挂云帆济沧海”，怀着饱满的热情、坚韧的性格、勤奋的态度，等待着我的是机遇与挑战!抓住这个机会，为单位尽自己绵薄之力。