计算机网络技术相关知识热门20篇

2019技术转移合同范本

2019技术转移合同范本

项 目 名 称：____________________

受让方(甲方)：____________________

转让方(乙方)：____________________

依据《中华人民共和国合同法》的规定，合同双方就__________________转让(该项目属____计划)，经协商一致，签订本合同。

第一条 转让的技术成果名称 (如果属于专利技术应写明专利号)

主要内容 技术指标

技术水平 (应写明该技术成果属于国际领先还是国内或者行业领先，并附权威机构的认定书或者项目鉴定、验收证书)

第二条 转让方应向受让方提交的技术成果资料清单：

提交上述技术成果资料的期限

提交上述技术成果资料的地点和方式：

第三条 转让的技术成果的秘密的范围 密级 保密期限 受让方的保密责任和义务 转让方的保密责任和义务

第四条 使用转让技术的范围：

受让方：

转让方：

第五条 验收标准和方法：

受让方使用该项技术，试生产________后，达到了本合同第一条所列技术指标，按____ 标准，采用________方式验收，由____方出具技术项目验收证明。

第六条 技术转让费总额及其支付方式：

一、技术转让费总额：_________________元。

二、支付方式：(采用以下第 种方式)：

1. 一次总付：_____________元，时间：___________________

2. 分期支付：

第一次支付____________元，时间：_______________

第二次支付 元，时间：____________

第三次支付 元，时间：____________

3. 按利润________ %提成，期限：____________

4. 按销售额________%提成，期限：____________

5. 其他方式：________________

第七条 违约金或者损失赔偿额的计算方法：

一、违反本合同第____条约定，____方应当承担违约责任，承担方式和违约金额如下：

二、违反本合同第____条约定，____方应当承担违约责任，承担方式和违约金额如下：

三、__________________________________________________

第八条 技术指导的内容(含地点、方式及费用)：_

第九条 后续改进的提供与分享：(本合同所称的后续改进，是指在本合同有效期内，任何一方或者双方对合同标的技术成果所作的革新和改进)。双方约定，本合同标的技术成果后续改进由 方完成，后续改进成果属于____方。

第十条 争议的解决方法：

在合同履行过程中发生争议，双方应当协商解决，也可以请求________进行调解。

当事人不愿协商、调解解决或者协商、调解不成的，双方商定，采用以下第____种方式解决。

一、向 (甲方总部所在地)仲裁委员会提请仲裁

二、向 (甲方总部所在地)有管辖权的人民法院提起诉讼。

第十一条 名词和术语的解释：________________________________________________________________________________________________________________

第十二条 其他(含中介方的权利、义务、服务费及其支付方式、定金、财产抵押、担保等上述条款未尽事宜)：

第十三条 本合同有效期限：___年___月__日至___年___月__日

第十四条 本合同一式 份，甲乙双方和有关批准部门各执一份。

甲 方： 乙 方：

法定代表人： 法定代表人：

或 或

委托代理人： 委托代理人：

地 址： 地 址：

开户银行： 开户银行：

甲方：____________________单位地址：__________________________

乙方：_____________________联系电话：__________________________公民身份号码：____________________居住住址：_________________________户籍地址_________紧急状态联系人：_______________联系电话：_________________________

双方根据《中华人民共和国劳动法》、《民法典》以及有关法律、法规、行政规章和甲方依法制定的规章制度，遵循自愿、平等、协商一致的原则，一致同意订立本劳动合同，双方共同信守合同所列各条款，并确认合同为解决争议时的依据。

一、合同类型与期限

第一条 甲、乙双方选择以固定期限形式签定本合同。

合同期限：______年，即自_____年_____月_____日起至_____年_____月_____日止。

二、工作内容和工作地点

第二条 甲方安排乙方在_____部门从事工作，具体的岗位职责，工作要求按甲方的有关规定执行，甲方可以根据本企业依法制定的规章制度对乙方工作岗位进行调整。

乙方工作地点为：_____________________________，甲方可以根据本企业依法制定的规章制度变更乙方工作地点。

第三条 乙方同意并承诺认真履行岗位职责，完成工作任务，遵守甲方的劳动纪律和规章制度，维护甲方的正当权益，服从甲方的管理。

三、工作时间和休息休假

第四条 甲方安排乙方执行标准工时工作制，甲方可以根据本企业依法制定的规章制度调整乙方执行的工时制度。

第五条 乙方享有在法定假期和企业规定的假期休息的权力。如甲方因工作需要安排乙方临时加班的，乙方应当理解和服从。甲方安排乙方加班，应符合法律、法规的规定，并给予相应的报酬或安排补休，具体按照国家规定和甲方依法制定的相关规章制度执行。

甲方：_______________

乙方：__________

_________年_________月_________日

甲乙双方为携手合作，促进发展，满足利益，明确责任，依据中华人民共和国有关法律之相关规定，本着诚实信用，互惠互利原则，结合双方实际，协商一致，特签订本合同，以求共同恪守：

第一条：服务内容、方式和要求：

第二条：工作条件和协作事项：

第三条：履行期限、地点和方式：

第四条：验收标准和方法：

技术服务或者技术培训按_______标准，采用______方式验收，由_____方出具服务或者培训项目验收证明。

本合同服务项目的保证期为______。在保证期内发现服务质量缺陷的，服务方应当负责返工或者采取补救措施。但因委托方使用、保管不当引起的问题除外。

第五条：报酬及其支付方式：

本项目报酬：元。

服务方完成专业技术工作，解决技术问题需要的经费，由方负担。

本项目中介方活动经费为：元，由方负担。中介方的报酬为：元，由方支付。

支付方式：

1、一次总付：元，时间

2、分期支付：元，时间

3、其它方式：元，时间

第六条：违约金或者损失赔偿额的计算方法：

违反本合同约定，违约方应当按《民法典》规定，承担违约责任。

技术违反本合同约定，违约方应当按《民法典》规定，承担违约责任。

技术中介违反本合同约定，违约方应按《民法典》规定，承担违约责任。

违反本合同第条约定，方应当承担违约责任，承担方式和违约金额如下：

第七条、争议的解决办法：

在本合同履行过程中发生争议，双方应当协商解决，也可以请求进行调解。

当事人不愿协商、调解解决或者协商、调解不成的，双方商定，采用以下第种方式解决。

因本合同所发生的任何争议，申请仲裁委员会仲裁;

按司法程序解决。

第八条：其它：

甲方：乙方：

_____年_____月_____日

项目技术咨询合同范本

技术咨询合同具有以下特征：

1、技术咨询合同在技术领域内具有自己特定的调整对象，即合同当事人在完成一定的技术项目的可行性论证、技术预测、专题技术调查、分析评价报告等科学研究活动中产生的民事法律关系。

2、履行技术咨询合同的目的在于：受托方为委托方进行科学研究、技术开发、成果推广、技术改造、工程建设、科技管理等项目提出建议、意见和方案，供委托方在决策时参考，从而使用科学技术的决策和选择真正建立在科学化的基础之上。

3、技术咨询合同有其特殊的风险责任承担原则，即因实施咨询报告而造成的风险损失，除合同另有约定外，受托方不承担赔偿责任。

项目技术咨询合同范本

甲方：________

乙方：________

经上述双方当事人协商一致，签订本合同。

第一条 项目名称：_______

第二条 委托方的主要义务

⒈自本合同生效后____日内，向顾问方提供下列背景资料： __________

⒉向顾问方支付报酬共_____元;分期支付。具体方式如下_____________

第三条 顾问方的主要义务

⒈在____年__月__日前完成咨询报告或解答委托方提出的问题;

⒉保证提出咨询报告符合下列要求：________。

第四条 保密条款

本合同有效期内，双方当事人应对下列技术资料承担保密义务：_____。

本合同期满后____年内，双方当事人应对下列技术资料承担保密义务：______。

第五条 验收标准和方式条款

对顾问方提供的咨询报告，按以下标准验收：_________。

具体验收方式如下：__________.

第六条 委托方的违约责任

⒈委托方迟延提供合同约定的技术资料，或者所提供的数据，资料有严重缺陷，影响工作速度和质量的，应当如数支付报酬，并支付数额为_____的违约金。

⒉委托方逾期2个月不提供或者补充有关技术资料和数据，导致顾问无法开展工作的，顾问方有权解除合同。委托方应当支付数额为____的违约金。

⒊委托方迟延支付报酬，应支付数额为____的违约金委托方不支付报酬，应当退还咨询报告和意见，补交报酬，支付数额为_____的违约金。

第七条 顾问方的违约责任

⒈顾问方迟延提交咨询报告和意见的，应当支付数额为____的违约金;

⒉顾问方提交的咨询报告不符合合同约定条件的，应当减收或免收报酬;不提交咨询报告和意见，或者所提交的咨询报告和意见水平低劣，无参考价值的，应当返还报酬，支付数额为_____的违约金;

⒊顾问方在接到委托方提交的技术资料和数据之日起超过2个月不进行调查论证的，委托方有权解除合同，顾问方应当支付数额为____的违约金。

第八条 有关技术成果归属条款

在履行本合同过程中，顾问方利用委托方提供的技术资料和工作条件所完成的新的技术成果，除合同另有约定外，属于顾问方;委托方利用顾问方的工作成果所完成的新的技术成果，除合同另有约定外，属于委托方。对新的技术成果享有所有权(或者持有权)的一方当事人，可依法享有就该技术成果取得的精神权利(如获得奖金、奖章、荣誉证书的权利)、经济权利(如专利权、非专利技术的转让权，使用权等)和其他利益。

第九条 咨询报告的实施风险责任条款

委托方有实施顾问方提供的经过验收合格的咨询报告和意见过程中出现的不良后果和经济损失,由委托方承担责任。

第十条 本合同争议的解决办法：____________。

第十一条 名词和术语的解释：_________。

本合同自双方当事人签字、盖章后生效。

顾问方负责人(或授权代表) 委托方负责人(或授权代表)

签名：_________(盖章) 签名：_______(盖章)

签字时间：_________ 签字时间：________

签字地点：_________ 签字地点：________

开户银行：_________ 开户银行：________

帐号：___________ 帐号：__________

顾问方担保人(名称)：___ 委托方担保人(名称)：__

地址：___________ 地址：__________

负责人(或授权代表) 负责人(或授权代表)

签字：__________(盖章) 签字：_______(盖章)

签字时间：_________ 签字时间：________

签字地点：_________ 签字地点:________

开户银行：_________ 开户银行：________

帐号：___________ 帐号：__________

甲方：提供单位______________

乙方：接入单位______________

中国教育和科研计算机网（CERNET）是国家教育委员会直接领导管理的全国性教育和科研计算机网络，其目的是利用先进实用的计算机技术和网络通信技术，实现校园网间计算机连网、信息资源共享并与国际学术计算机网络互连，其服务对象主要是我国的教育和科研机构。中国教育和科研计算机网的所有接入单位必须与相应的网络提供单位签署本项协议，并报上一级网络备案。

第一条 总则

（一）中国教育和科研计算机网接入单位的所有工作人员和用户必须遵守执行《中华人民共和国计算机信息网络国际联网管理暂行规定》和国家有关法律法规，严格执行安全保密制度，并对所提供的信息负责。

（二）中国教育和科研计算机网的所有工作人员和用户必须对所提供的信息负责。不得利用计算机连网从事危害国家安全、泄露国家秘密等犯罪活动，不得制作、查阅复制和传播有碍社会治安和有伤风化的信息。

（三）在中国教育和科研计算机网上不允许进行任何干扰网络用户，破坏网络服务和破坏网络设备的活动，这些活动包括（但并不局限于）在网络上发布不真实的信息、散布计算机病毒、使用网络进入未经授权使用的计算机、不以真实身份使用网络资源等。

（四）中国教育和科研计算机网在各级管理机构设立网络安全员，负责相应的网络安全和信息安全工作。

（五）中国教育和科研计算机网的各级网络管理机构定期对相应的网络用户进行有关的信息安全和网络安全教育。

（六）中国教育和科研计算机网责成各级管理单位根据国家有关规定对于上网信息进行审查。凡涉及国家机密的信息严禁上网。

（七）中国教育和科研计算机网的所有用户有义务向网络安全员和有关部门报告违法犯罪行为和有害信息。

（八）中国教育和科研计算机网的有关工作人员和用户必须接受并配合国家有关部门依法进行的监督检查。

第二条 接入管理

（一）接入中国教育和科研计算机网的连网单位和用户必须遵守中国教育和科研计算机网制定的规定和制度，按时缴纳有关费用。

（二）中国教育和科研计算机网的接入单位和用户不允许与其它互连单位私自连网。

（三）与中国教育和科研计算机网中止连网的接入单位和用户单位必须把相应的IP地址退还中国教育和科研计算机网。

（四）中国教育和科研计算机网的接入单位必须严格执行《中国教育和科研计算机网管理办法》的规定，不允许发展授权范围以外的任何用户。

（五）中国教育和科研计算机网的接入单位必须成立管理机构对于网络进行严格管理必须设立网络安全员，负责相应的网络安全和信息安全工作，保存网络运的有关记录。网络安全员要指导系统管理员和用户对于各自负责的网络系统、计算机系统和上网资源进行管理。

（六）中国教育和科研计算机网的所有接入网络必须与中国教育和科研计算机网或上一级接入网络签署本协议并与自己的所有个人用户签署《中国教育和科研计算机网用户守则》。各级网络管理机构必须保留相应的协议和守则备查。

第三条 信息管理

（一）中国教育和科研计算机网的接入单位必须定期对相应的网络用户进行有关信息安全和网络安全的检查和教育。

（二）中国教育和科研计算机网的接入单位和用户必须对于自己的上网信息负责。涉及国家机密的信息严禁上网。

（三）中国教育和科研计算机网的接入单位和用户有义务向上一级网络和有关部门报告网络上的违法犯罪行为和有害信息。

（四）中国教育和科研计算机网的接入单位和用户必须遵守知识产权的有关法律法规。

第四条 惩罚条例中国教育和科研计算机网对违反本条例的接入单位和用户进行警告、停止网络连接直至诉诸法律。本单位作为中国教育和科研计算机网的接入单位同意遵守上述条款，如违反本协议，愿意接受处罚并承担法律责任。

甲方：_________________

盖章：_________________

负责人签字：___________

日期：_________________

联系地址：_____________

邮编：_________________

电话：_________________

传真：_________________

电子邮件：_____________

乙方：_________________

单位名称：_____________

盖章：_________________

单位负责人签字：_______

网络中心主任签字：_____

日期：_________________

通信地址：_____________

邮编：_________________

电话：_________________

传真：_________________

电子邮件：_____________

网络名称：_____________

IP地址范围：___________

域名：__________.

连网方式：_____________

连网日期：_____________

甲 方： (以下简称“甲方”)

乙 方： (以下简称“乙方”)

甲、乙双方本着互利互惠的原则，就甲方单位“用友软件系统”的维护服务事宜，经充分协商，决定订立本协议。具体服务项目及范围见甲方所购“用友软件”配置清单，协议期间由乙方提供日常服务。

第一条 定义：

1.1 “维护”是指乙方为甲方提供基于许可软件的技术指导和解决产品故障等服务工作的总称。

1.3 “现场”是指乙方根据许可合同许可甲方使用许可软件的场所。 “现场维护”是指乙方根据甲方提出的技术问题派遣技术人员到甲方现场处解决问题的过程。现场维护的技术问题包括：(1)由于许可软件产品故障导致的死机、数据错误;(2)由于环境原因导致的系统显示错误、数据错误、运行效率降低等问题。

1.4 “远程维护”是指乙方根据甲方提出的技术问题通过电话或互联网向甲方提供问题解答和技术指导的过程。

1.6 “软件更版”是指由于许可软件出现故障而对许可软件进行优化、换代的过程。 “技术支持”是指乙方为了保障许可软件和系统正常运行，在服务时间内通过话或互联网向甲方提供的援助或技术指导。包括(1)澄清许可软件的功能和特点;

(2)文档资料的澄清;(3)许可软件的操作指导;(4)通过电话和/或互联网确认、分析和纠正错误。

1.7 “热线支持”是指乙方客户服务中心服务人员通过电话向甲方提供技术问题解答的过程。

1.8 “响应时间”是指从乙方接到甲方服务请求之后，到与甲方进行沟通并对甲方做出服务承诺的时间。

第二条 提供维护与技术支持

“服务时间”是指乙方工作时间，每天8:30至17:30。

2.1 在甲方向乙方支付了相应的服务费以后，乙方将根据本合同的约定向甲方提供许可软件的维护与技术支持服务。乙方提供的该等维护服务为标准维护服务(具体内容见本合同附件一)，除本合同另有明确约定以外，本合同所称维护服务服务仅指标准维护服务。

2.2 本合同附件一反映了本合同生效时乙方提供维护与技术支持的服务政策。乙方将

在其允许甲方访问的技术支持网站上发布最新的维护与技术支持政策，以便通知甲方任何服务政策的改变。所有改变(如有)将在当时的维护与技术支持合同期限届满之后才生效。在续签维护与技术支持合同之前，甲方有义务审查乙方当时有效的维护与技术支持政策。

第三条 合同期限

3.1

3.2 本合同有效期限为 年 月 日 至 年 月 日。 本合同有效期限届满，如果甲方需要乙方继续提供有关许可软件的维护与技术支持服务，应提前一个月通知乙方续签维护与技术支持服务合同。

第四条 服务费及支付方式

4.1本服务项目服务费为：人民币(大写) 壹万捌仟陆佰壹拾元整 元(小写： 元整)。

2、支付方式

全合同签订后五个工作日内，甲方向乙方支付合同全款;

第五条 服务范围

5.1 乙方向甲方提供维护与技术支持服务的范围包括：

5.1.1 由于系统数据库或许可软件发生严重故障或在关键处理时期内主应用程序出现故障而使甲方的现场系统停滞并且不能用许可软件处理数据。

5.1.2 许可软件发生问题而导致甲方主要业务受到严重干扰并且无法轻易解决(暂时性地)的问题。

5.1.3 许可软件发生非关键性问题，并且甲方能继续运行系统和/或进行操作。

5.1.4 所有有关许可软件的使用和实施的问题和要求。

5.2 本合同不包括许可软件的升级服务，升级服务按北京用友软件股份有限公司的统一规定执行。

5.3 甲方如果要求乙方超出本合同及其附件约定的范围提供维护与技术支持服务，甲方应与乙方另行协商签署相关协议，并向乙方支付相应的服务费用。

5.4 用友产品清单：

第六条 响应时间

乙方在接到甲方通过电话、信函、传真、电子邮件、网上提交等方式提出关于许可软件的服务请求后，应在24小时之内给予响应并提供服务。

第七条 甲方责任：

为方便乙方根据本合同的约定提供服务，甲方应：

7.1 确保有专人负责许可软件的使用和管理，并建立相关制度，以确保许可软件运行环境(包括计算机、打印机及相关硬件设备)的安全，为许可软件正常运行提供保障。

7.2

7.3 定期做好系统数据备份，并对备份数据进行妥善保管。 在许可软件使用过程中发现许可软件出现异常，应及时与乙方取得联系，并记当前故障现象，便于乙方做出诊断。

7.4 在乙方进行维护与技术支持时，根据乙方要求，指定配合工作的员工，提供必要的设备。

7.5在乙方服务人员维护与技术支持完成时，配合检查许可软件系统运行是否正常。

第八条 保密条款

双方同意严格按照本合同的规定使用对方的保密信息，未经对方的事先书面许可，不得向第三方，或允许向第三方直接或间接地透露保密信息。

第九条 责任限制与违约责任

9.1 责任限制

9.1.1 除本合同的明确约定以外，乙方不对维护与技术支持服务做其他任何明示的或者暗示的保证或承诺。

9.1.2 乙方承诺根据本合同的约定及时向甲方提供服务，但是对于因不可抗力因素导致的延误而给甲方造成的损失不承担任何责任。

9.1.3 甲方违反本合同第七条的约定，导致乙方无法提供或无法按合同约定的期限提供服务，乙方不承担任何责任。

第十条 适用法律及争议解决

11.1 本合同适用法律为：《中华人民共和国合同法》、《中华人民共和国著作权法》、《中华人民共和国计算机软件保护条例》等中国相关法律、法规。

11.2 凡由本合同引起的或与解释或执行本合同有关的任何争议，双方应首先通过友好协商或调解解决。协商或调解不成，双方同意采取下列第 2 种方式解决：

11.2.1 向 仲裁委员会申请仲裁，仲裁应依据该仲裁委员会当时的仲裁规则进行;仲裁裁决是终局的，对双方都有约束力;仲裁费用应由败诉方承担，除非仲裁裁决另有裁定。

11.2.2 向有管辖权的人民法院起诉。

第十一条

12.1 本合同生效后，无论甲方或乙方的名称、组织形式、企业性质、经营范围、注册资本、投资者等发生任何变更，甲方或乙方应继续或要求其权利义务的继承人恪 其他守并履行其在本合同项下之相关义务。

12.2 因地震、台风、洪水、海啸、火灾、战争、暴乱、罢工及其他不可抗力因素导致

本合同不能履行或不能完全履行时，根据不可抗力事由对履行本合同影响的程度，由双方协商解除本合同，或者部分免除本合同的履行义务，或者延期履行本合同。 12.3 本合同由以下附件组成，附件为本合同不可分割的部分，与本合同具有同等法律

效力。

附件一：《标准运行维护服务内容》

本合同自双方授权代表签字并加盖公章生效;一式执 壹 份，具有同等法律效力。

(签章页)

甲方： 乙方：

代表人:____________ 代表人:____________

______年_____月______日

技术转让合同范本

第七章 质量验收试验

7.1 为了验证按乙方提供的技术资料制造的合同产品可靠性，由甲、乙双方共同在合同工厂对考核的合同产品的技术性能和要求进行考核验收。如果需要，也可以在乙方工厂进行试验或重做。甲方可派指定的人员验证重复试验，乙方负责重复试验和乙方人员的费用，甲方负责甲方参加重复试验的人员和翻译的费用。具体办法见本合同附件七。

7.2 考核试验产品的技术性能应符合乙方提供的本合同中的标准规定，即 通过鉴定。甲、乙双方签署“合同产品考核验收合格证明”一式四份，每方各执二 份。

7.3 如考核试验产品的技术性能达不到附件规定的技术参数，双方应友好 协商，共同研究分析原因，采取措施，消除缺陷后进行第二次考核验收。

7.4 如考核试验产品不合格是乙方的责任，则乙方派人参加第二次考核验收的一切费用，由乙方负担。如系甲方责任，该费用由甲方负担。

7.5 若考验试验产品第二次试验仍不合格时，如系乙方的责任，乙方应赔偿甲方遭受的直接损失，并采取措施消除缺陷，参加第三次考核，费用由乙方负担。 如系甲方责任，该费用由甲方负担。 7.6 若考核试验产品第三次考核试验不合格时，双方应讨论执行合同的问题，如系乙方责任，则按合同9.8.a条规定，甲方有权修正合同。如系甲方责任，则由双方共同协商进一步的执行问题。乙方将根据甲方的要求，为改进不合格的样机提供技术咨询。

第八章 “合同产品”的出口和商标

8.1 甲方生产的“合同产品”可在中华人民共和国国内销售，可根据下列条件出口到其它国家； 8.1.1 甲方应首先与乙方协商，要求在乙方的销售/分配网所在地区安排销售（销售、分配网包括乙方子公司和代理商）。 出口销售的数量和项目将通过友好协商决定，若无法安排，则甲方可以自由出口，但是，甲方必须在完成交易后一周内，将项目、数量和购买商名称通知乙方。 8.1.2 在乙方销售/分配网不包括的地区，甲方可以自由销售。

8.2 对于甲方把“合同产品”装在中国的主机上出售到任何国家（包括在乙方销售/分配网所在地国家）的权利，乙方不得干涉。为维修中国出口的主机，甲方可以自由销售作为配件的“合同产品”。 8.3 在合同期间，甲方可以在“合同产品”上使用乙方使用的商标和标上甲方的商标，并注上“中华人民共和国＿＿＿＿厂制造”。商标许可证应由甲方和＿＿＿＿公司单独签订。

8.4 当使用商标时，甲方生产的“合同产品”必须符合本合同项下甲乙方提供的标准。在必要的时候，每年乙方可进行一次抽样试验。在抽样试验结果不符合乙方提供的标准时，乙方应建议甲方改进不合格的“合同产品”并在＿＿＿＿个月内再次进行试验。若结果仍不符合，则乙方就可中止甲方使用其商标的权利。甲方可以再次提交另外的样品给乙方进行试验。再次抽样试验，结果符合乙方提供的标准时，乙方将再次给予甲方使用其商标的权利。

共7页，当前第4页1234567

国际工程技术咨询服务合同

编号：_________

签订日期：_________年_________月_________日

中国_________公司（以下简称“甲方”）为一方，_________国_________公司（以下简称“乙方”）为一方，双方就工程的技术咨询服务，授权双方代表按下列条款签订本协议书：

一、甲方请乙方就工程提供技术咨询服务，乙方愿意提供这样的服务。

二、乙方向甲方提供的技术咨询服务范围如下：

1.坝基岩体稳定、变形及基础处理措施。

2.大坝下游的防洪防冲和岸坡保护问题。

3.库岸滑坡涌浪问题及岸坡变形观测技术。

三、乙方的责任如下：

1.乙方应于_________年_________月内派遣_________名身体健康、能够胜任工作的专家来中国进行_________天的技术咨询服务，派出技术咨询专家的名单应事先征得甲方同意。

2.乙方专家应到现场考察，并正确、全面地解答甲方人员提出的咨询问题，在离开中国前，向甲方提出咨询报告初稿，并在离开中国后一个月内提出正式咨询报告一式_________份，报告内容应包括附件一所列内容，并用英文书就。

3.乙方的专家在中国进行技术咨询服务的时间为_________个日历日（包括_________个旅途日和_________个周末日），每周工作六天，每天工作八小时。

4.专家在中国工作期间应遵守中国的法律和工作地区的有关规定。

5.乙方将正式的技术咨询报告给甲方寄出后，应以电传通知甲方如下内容：报告寄出日期、邮单号。

6.技术咨询报告如在邮寄途中丢失，乙方接到甲方通知后立即免费补寄。

四、甲方的责任范围：

1.考虑到本协议第二、三条所规定的乙方所提供的咨询服务，甲方支付给乙方一笔总费用，其金额为_________美元（大写_________美元整）。

2.为乙方3名专家提供在中国境内食、宿及工作需要的交通。

3.提供工作必须的技术资料、图纸和技术文件。

4.提供在中国工作所需的翻译人员。

5.协助办理专家出入中国签证和在中国居留、旅行手续并提供方便。

五、费用的支付

1.本协议书的费用以美元支付。

2.本协议总金额25％，计_________美元，在乙方派出的专家到_________后，甲方凭收到下列单据，经审核无误后3天内通过_________银行和_________银行向乙方支付。

a._________公司北京办事处出具的以甲方为受益人金额为协议总金额25％计_________（美元）不可撤销的保证函正副本各一份（保证函格式见本合同第二号附件）。

b.商业发票正本一份、复印本五份。

3.本协议总金额75％，计_________美元在乙方完成技术咨询服务并提交正式的技术咨询报告后，甲方凭收到下列单据，经审核无误后不迟于_________天通过_________银行和_________银行向乙方支付。

a.商业发票正本一式六份。

b.即期汇票一式两份。

c.邮寄正式技术咨询报告的邮单或空运单一式两份。

六、凡在中国以外所发生的一切银行费用由乙方承担。在中国发生的一切银行费用由甲方承担。

七、双方应对互相提供的一切资料给予保密，未经对方书面同意不得向第三者透露。

八、税费

1.中国政府根据现行税法对甲方课征有关执行本协议的一切税费，由甲方支付。

共2页，当前第1页12

政府计算机采购合同

合同编号：

供货商：

采购单位：

为了保护供需各方合法权益，根据《中华人民共和国政府采购法》、《中华人民共和国合同法》、《______省政府采购协议供货制实施办法（试行）》等相关法律法规并严格遵循“关于做好第3期全省计算机、打印机协议供货有关事宜的通知”（招标编号：zzcga-gk-004）招标文件、中标供应商投标文件、“______省政府采购供货协议”的相关规定和采购〔〕6号“关于做好XX年第3期计算机、打印机政府采购协议供货有关事宜的通知”、“政府采购协议供货承诺书”中的相关承诺和“______市计算机政府采购协议供货补充协议”，签订本合同，并共同遵守。

一、合同采购的产品所需资金来源构成为：

预算内（ ）；预算外（ ）；自筹（ ）。

付款方式为：会计核算中心支付（ ）。

以上按实际情况打“√”确认，涂改无效。

二、计算机品牌、型号、规格和主要配置、单价、数量、金额

┌───┬────┬──────┬───┬───┬───┬────┬────┬───┬───┐

│序号 │计算机品│型号规格和主│基准价│ 数量 │县协议│县协议采│标配显示│显示器│ 小计 │

│ │牌 │要配置 │ │ │优惠率│ 购价格 │ 器规格 │ 差价 │ │

├───┼────┼──────┼───┼───┼───┼────┼────┼───┼───┤

│1 │ │ │ │ │ │ │ │ │ │

├───┼────┼──────┼───┼───┼───┼────┼────┼───┼───┤

│2 │ │ │ │ │ │ │ │ │ │

├───┼────┼──────┼───┼───┼───┼────┼────┼───┼───┤

│3 │ │ │ │ │ │ │ │ │ │

├───┴────┴──────┴───┴───┴───┴────┴────┴───┴───┤

│合计：人民币（大写） │

└─────────────────────────────────────────────┘

注：1.本次招标确定的协议供货价格是根据采购单位购买的数量确定不同的协议价格。若单次采购金额大于等于人民币20万元时，采购单位必须按有关规定报政府采购监督管理部门重新确定采购方式。

2.协议供货总价=数量×基准价（1-根据购买数量的适用优惠率）

三、保修期：

上述产品的保修期为（ ）月；免费更换时间为交货后（ ）月

故障响应时间为： （ ）小时内；故障排除时间为： （ ）小时内；

备品备件提供时间为：（ ）小时内。

四、交（提）货时间、地点、方式：供货商于 年 月 日前将货物送至以下指定地点交由需方指定收货人：

1.货商应在交货前向需方提供交货计划；

2.运输、保险和装卸的费用由供货商承担。

共2页，当前第1页12

甲方：_________

乙方：_________

甲、乙双方本着互利互惠的原则，就甲方单位计算机的维护服务问题，经充分协商，决定订立本协议，

一、合作的内容

甲方自愿将本单位的_________台计算机（含键盘、鼠标、显示器）交给乙方维护，具体配置见配置。乙方提供上门服务。合同期为_________年。甲方共有台式计算机_________台给乙方维护，共需要维护费用￥_________元（RMB）/年；在合同期内，甲方如果新增电脑，维护费用每台￥_________元（RMB）/年。该款项自合同签署后，甲方每（月/季度）_________日付清商议服务款项给乙方。每月甲方需付给乙方服务费￥_________元（RMB），大写￥_________元（RMB）。该合同总计甲方需付给乙方服务费￥_________元（RMB），大写￥_________元（RMB）。

二、上门服务项目

乙方提供上门服务的项目包括：

1.电脑各类故障检修无法启动，不能进入系统，运行速度减慢，常死机，电子邮件设置等，操作系统重装；

2.系统软件安装WIN98、WIN2K、WINXP等，操作系统的补丁升级，系统主板BIOS升级；

3.工具软件安装及维护Office20xx、Acdsee、金山词霸等市面常用软件；

4.增加及更换电脑板卡及部件CPU、主板、内存、显卡、声卡、电源；

5.电脑升级给客户最佳的升级方案，用最少的花费做到最好的性能；

6.各类硬件驱动程序安装各类显卡、声卡、Modem；

7.查杀电脑病毒，各类电脑病毒（分区病毒、文件病毒、邮件病毒）查杀，但在这种情况下，乙方不能够确保原有数据的完全恢复；

8.数据备份光盘或硬盘备份（所需的备份介质由客户提供）。

三、协议细则

1.甲方_________台台式计算机中，在厂商保修期内的有_________台，已经过保修期的有_________台。甲方损坏的计算机仍在厂家保修期内，乙方可提供软件及检测服务（不开机箱），若检测结果是硬件损坏，乙方可送至厂家维修站保修或更换，但甲方必须提供详细地址、联络方式和计算机的保修证明，乙方不保证保修成功及所需时间。维修站点在城区内不另收服务费，在城区外需加收相应的交通费。

2.甲方损坏的电脑部件不在厂家保修期内，乙方可为甲方修理。如果修理时间超过五个工作日，乙方可以应甲方要求提供替用配件给甲方免费使用至部件修理完成。

3.对于已经使用时间已经达到或超过_________年的计算机若出现故障，甲方如仍需要修理的，修理更换的坏件成本费用需要甲方另外负担，乙方不收取其他费用

4.在保修期内的每台计算机每年按_________元人民币收费，保修期外的每台计算机每年按_________元人民币收费。若有机算机的过保时间刚好跨度本合同的时间范围的，按照保修器内的计算机收费。

5.乙方为甲方提供服务时，会配合甲方数据信息的安全使用，并严格保守甲方的一切商业秘密。但乙方不承担由于维修造成的信息丢失，包括甲方重要的数据、资料丢失等。甲方应当自行先备份数据、资料。乙方可以为甲方代做备份，但不对备份甲方资料、数据的完整性承担责任。

6.在协议签订后，乙方有权记录电脑的特征（如编号等）和在电脑上做标记用以识别电脑，在确认甲方电脑的型号和编号以后，甲方电脑管理者签字确认。

7.乙方工作需要甲方的配合的情况乙方工程师在甲方计算机进行维护时，甲方应尽可能配合工作，如提供计算机的驱动程序（在有的情况下），乙方工程师需要现场查阅网上资料时，在不涉及甲方网络安全和其它特殊考虑的前提下，甲方应当配合。在做重大的改动（如重装操作系统）时，乙方工程师会询问甲方有无重要的数据需要备份，甲方应当配合。

8.乙方工程师上门维修时，如甲方不满意该工程师的服务，可投诉至甲方技术支持中心，投诉电话：_________，乙方将在24小时内处理投诉，并把结果反馈给乙方。

9.乙方人员不得利用假、坏计算机配件，来提出让甲方维修或更换的申请，一旦甲方发现此种情况，有权作出自我保护，停止该计算机配件的维护，并向乙方管理层提出申诉。

四、软件说明

乙方在维护甲方电脑时，为其安装的任何软件，版权均由甲方负责，乙方不提供任何软件的版权。甲方如需安装正版软件可以委托乙方代购。如甲方需要查杀电脑病毒服务，必须安装正版的杀毒软件。在保证甲方用户正常功能和保护数据的前提下，乙方工程师有权决定解决问题的方案。

五、服务响应时间

乙方接到甲方报障时，承诺从报障时后60分钟内安排工程师上门，如果报障地点离乙方超过5千米，响应时间为90分钟，具体时间由甲方和乙方约定。上门前乙方进行电话确认。乙方工作时间为每周一至周六9：30－18：00，如甲方要求加急服务或晚上服务，则甲方每次需付￥_________元（RMB）的士费。

下列情况，甲方可以将主机交给上门工程师搬回乙方维护，承诺在48小时内预约送回：

1.甲方不希望上门工程师在现场操作。

2.故障情况在现场无法解决。

3.故障情况解决所需的时间较长而甲方不能相陪。

六、合同执行

1.本合同执行过程中。甲乙双方如需要修改、增删本合同条款内容，应在双方都认可的情况下加入本合同附件。附件具有同等法律效力。

2.双方合同执行中如有争议，应友好协商解决，协商不成按照中华人民共和国有关法律提交当地法院解决。

本合同一式二份，甲乙双方各执一份，具同等法律效力。合同自双方签字盖章后生效。

七、合同的解除

自_________年_________月_________日至_________年_________月_________日止，合同到期自行解除。如果甲方续签合同，则另签合同。若乙方与甲方之间有难以解决的矛盾，经双方协商难以调解的，甲方可以要求解除和约，但甲方必须付清已经服务的次数所需的费用。

甲方（盖章）：_________    乙方（盖章）：_________

负责人（签字）：_________    负责人（签字）：_________

_________年____月____日    _________年____月____日

甲方：_________

乙方：_________

为发展广播电视事业，提高_________市广播电视台电视节目制作质量，甲方购买乙方_________电视节目编辑系统设备一套。甲乙双方本着友好合作的原则，经双方友好协商达成如下协议：

一、“非线性编辑工作站”实现功能

1.非线性编辑系统提供dv口、s端子、视频复合口的采集、输出，支持分量输出

2.一般非线性编辑系统支持的相关编辑、字幕、特技功能

3.dv格式的avi、mpeg文件的混编功能

4.消除电脑系统的2g和4g文件大小限制

5.实现图文字幕混排功能

6.支持视频多文件格式输出(avi、mpeg、wvm等)

7.在编辑线上实时录音功能(注：音频卡为选购件)

8.支持cool3d软件输出的视频文件实时编辑功能。

说明：因没有视频卡，本机没有从录像机采集和回录、回放功能，不提供编辑时从电视监看功能。

二、系统设备配置、系统相关软件：

系统设备配置及相关软件：

三、交货期

合同签定之日起_________个工作日以内。

四、运输包装和交货地点

产品须配有完整正规的外包装和相关的技术说明书，并由乙方送货上门。

五、验收标准

甲方依照本合同和乙方提供的”系统建设方案”的有关条款进行验收，且要求全部产品符合国家有关技术和质量的法规要求。合同签定之日起乙方_________天内完成设备安装调试，_________天内培训完毕;系统安装调试完毕并投入运行后3天内为系统免费试运行期，运行期后甲方应在3天内组织人员验收，否则视为验收合格。

六、付款方式、商品产权

1.全部货款分期付清。签定本合约时，甲方支付合同款贰万伍仟元(第一期);乙方在_________交货、安装调试完毕并验收，余款项三个月内付清。

2.乙方按合同提供的商品，在甲方未付清全部货款前，商品产权归乙方所有;在甲方付清全部货款后，商品产权归甲方所有。

七、服务标准

1.乙方负责系统的安装调试，并负责对甲方技术培训和指导。

2.乙方对所提供的设备一年内免费上门保修(如操作失误或人为损坏及不可抗因素造成的直接经济损失不在免费保修范围内)，对编制的软件提供备份盘并免费维护一年。

3.维修期内，乙方提供免费服务，系统如有故障，乙方先通过互联网进行远程维护，若不能解决问题，乙方须在48小时内上门处理，保修期外乙方收取工本费，乙方负责对系统终生维护。

4.乙方设备交货前一周内，甲方应备好电脑系统工作的机房。

八、违约责任

1.甲乙双方签订合同后，乙方在收到甲方的预付款的五个工作日内，必须依时将设备运到乙方所在地。否则，甲方有权拒绝支付合同款每天5%的货款。

2.甲方在乙方设备验收合格后，必须按合同规定支付货款，若不按合同支付货款，甲方要按违约金额每天1%作为合同违约金补偿给乙方。

九、合同生效

1.合同一式_________份，甲乙双方各执_________份，每份具有同等法律效力。

2.本合同自签字盖章之日起生效，未尽事宜双方可协商解决。

甲方：_________(盖章) 乙方：_________(盖章)

法人代表：_________(签字) 法人代表：_________(签字)

地址：_________ 地址：_________

电话：_________ 电话：_________

传真：_________ 传真：_________

账户名称：_________ 账户名称：_________

开户行：_________ 开户行：_________

_________年____月____日 _________年____月____日

章程修正案

根据《中华人民共和国公司法》及公司章程的有关规定，对公司章程修正如下：

一、原公司章程第六条公司注册资本：_________________人民币__________万元。公司注册资本分期到资，首期货币出资人民币__________万元于公司成立前到资，其余货币出资人民币__________万元，于公司成立之日起两年内缴纳。

现修正如下：

公司注册资本：人民币__________万元。

公司注册资本分期到资，并于变更登记前全部缴足。

二、原公司章程第九条公司实收资本：人民币__________万元。

现修正如下：

公司实收资本：_________________人民币__________万元。

三、原公司章程第十二条股东的出资方式、出资额和出资时间股东__________：_________________认缴注册资本__________万元，实缴__________万元，持有公司__________%的股权，以货币出资，所认缴注册资本已全部缴足。

股东__________：_________________认缴注册资本__________万元，实缴__________万元，持有公司__________%的股权，以货币出资，所认缴注册资本已全部缴足。

股东__________有限公司：_________________认缴注册资本__________万元，实缴__________万元，持有公司__________%的股权，以货币出资，所认缴注册资本已全部缴足。

现修正如下：

股东的出资方式、出资额和出资时间股东

__________：_________________认缴注册资本__________万元，实缴__________万元，持有公司__________%的股权，以货币出资，所认缴注册资本已全部缴足。

股东__________：_________________认缴注册资本__________万元，实缴__________万元，持有公司__________%的股权，以货币出资，所认缴注册资本已全部缴足。

股东__________有限公司：_________________认缴注册资本__________万元，实缴__________万元，持有公司__________%的股权，以货币出资，所认缴注册资本已全部缴足。

四、其他条款不变。

_______________有限公司法定代表人：_________________(签字)

__________年__________月__________日

委托方(以下称甲方)： 业务负责人： 服务方(以下称乙方)： 业务负责人： 甲乙双方就甲方的计算机维修、维护及技术支持等相关事宜，协商一致，订立本合同。以下为各项条款。

第一条 项目名称：计算机维护及计算机技术支持。

第二条 甲方的义务：

1、甲方应在本合同签订____日内为乙方提供下列资料： 本合同所涉及的全部设备软、硬件配置清单和所处位置清单。本清单将成为本合同附件之一部分。 甲方电脑机房负责人员的姓名和联系方式等背景资料。 在乙方人员提供现场服务时，应派员协助乙方工作。

2、提供正版系统软件和正版应用软件。

第三条 乙方的主要义务：

1、严格按照合同约定的上门服务方式进行服务，确保计算机正常运行。

2、在接到甲方关于要求改进或更换不符合相关合同约定的.配件、技术资料及更改维修、维护方案的通知后____日内做出答复。

3、对甲方计算机机内数据承担保密义务。

4、依照甲方规定的技术指标完成服务工作。

第四条 乙方的服务方式：

1、根据甲方要求乙方对甲方的设备(见清单)维修、维护，更换配件等提供上门服务。

2、为

第二条

第二款甲方所列之联系人提供远程技术支持，时间为___：___-___：___，除春节假期外，全年提供服务。

3、成本如遇甲方有重大活动、展会或紧急情况时，乙方可应甲方要求，及时安排工程师到达设备现场，协助工作，并提供技术支持、咨询维护等方面的服务。特殊展会局网组建服务费另计。

4、根据甲方要求，为甲方提出系统改进及软硬件的升级方案。

第五条 乙方的服务内容：

1、软件方面：对甲方现有软件进行维护，包括操作系统及应用程序的安装和调试。

2、硬件方面：对所有硬件部分定期检查和维护，对所有计算机进行常规检测以尽可能发现潜在故障并排除。

3、零部件的更换：提供更换服务。为使新增之硬件设备仍包含在本合同标的范围内，乙方负责提供所有新增之硬件设备，但价格不得高于市场价。

4、软件的升级，提供升级服务。为使新增之软件仍包含在本合同所标范围内，乙方可以负责提供所有新增之正版软件，但价格不得高于市场价。

5、局域网的维护，网络的病毒防护和安全管理。

第六条 服务费计算标准及支付方式

1、乙方对甲方的计算机设备(见设备清单)进行维护维修工作，服务期限自________年____月____日至________年____月____日，计算机(终端)数量：___台。甲方应支付给乙方每月服务费___元，年共计___元人民币。

2、乙方每月为甲方提供固定时间两次上门日常维护三次随叫随到应急服务。如超出每次上门收上门费___元。

第七条 免责条款： 如发生不可抗力或甲方未按照乙方要求造成的数据丢失、硬件损坏，乙方不承担责任。

第八条 合同争议的解决方法： 双方对本合同的解释如有不同意见，发生分歧和争执，或由本合同产生或与本合同有关的其它事项，应本着互谅的原则协商解决，协商不成可根据现行法律，提交双方均能接受的人民法院解决。 本合同共两份，双方各执一份。两份文本具有同等效力，并对双方均有约束力。 甲方： 代表签字： 乙方： 代表签字： 签订日期

信息技术咨询服务合同

技术咨询合同在技术领域内具有自己特定的调整对象，即合同当事人在完成一定的技术项目的可行性论证、技术预测、专题技术调查、分析评价报告等科学研究活动中产生的民事法律关系。

下面是小编整理的信息技术咨询服务合同，希望能给大家带来帮助!

甲方：

乙方：

根据《合同法》等有关法律、法规的规定，就乙方为甲方提供教育信息咨询事宜，双方在平等互惠、协商一致的基础上达成如下条款，以共同遵守。

一、服务项目

甲方为乙方提供就下列项目的教育信息咨询服务：对公司的员工进行教育分析、学习规划、择校问题及高效率完成得出诊结论分析，指出解决路向并为其提供相关的教育信息咨询服务。

二、项目完成期限及收费

1、以上服务项目收费标准为人民币31800元于签约后一次性支付。

2、甲方应在本合同生效日壹周内开始实施教育信息咨询服务，并在壹年内完成所有的咨询服务。

三、甲方乙方的基本义务

(一)乙方的基本义务

1、与甲方诚信合作，为甲方开展工作提供便利，向甲方提供与服务事项相关的情况和资料。

2、如有关的情况和事实发生变化，应及时告知甲方。

3、按照约定支付服务费。

4、向甲方提出的要求不应与法律及会计职业道德和职业纪律规定相冲突。

(二)甲方的基本义务

1、必须遵守职业道德和执业纪律。

2、应当勤勉尽职，依法在合同约定范围内维护乙方的最大利益。

3、应当及时向乙方发表顾问意见;按时完成提交项目报告。

4、对乙方的商业秘密或个人隐私应当保守秘密。

四、生效、违约处理及其他约定事项

1、本合同在签约并成功付费后生效。

2、双方之间发生争议的，应当进行协商或由第三方调解。

3、本合同未尽事宜，甲乙双方应持积极态度友好协商解决。

4、本合同一式贰份，甲乙双方各执壹份，效力相同。

甲方(盖章)：乙方(盖章)：

年月日年月日

第一条 合同性质

签订本合同的双方为：

甲方：美国卡洛驰责任有限公司

地址：美国 科罗拉多州，尼沃特

授权代表：陈琪，职务：销售经理

身份证号码：___________

乙方：小灵猫哈特发热鞋有限公司

地址：中国，广州国际贸易中心，站西路26号

法定代表人：陈西，职务：销售经理

身份证号码：__________

第二条 定 义

本合同及附件中所引用的技术名词含义分别阐述并明确如下：

2.1. “产品”指合同附件所列的产品。

2.2. “专利”系指登记获有专利权的和经登记获有实用型专利权的 本合同附件所列明的须经申请的专利技术。

2.3. “技术”系指为满足生产、使用、保养及销售该产品所需的技术，并为 乙方目前所持有的或将来能获得的并有权向第三方公开的技术数据、配方、生产 程序、图纸、说明书、手册目录及信息等。

2.4. “商标”系指合同附件所列明的商标为准。

2.5. 乙方保证：按双方协定时间提供的技术信息应是准确的、完整的和清晰 的，并且由乙方提供的实用技术是最先进的;合营公司按乙方的要求，在正确的 应用其技术的状况下，合营公司的产品应达到国际(或国内)的先进水平。

2.6 有效日期

该合同有效期自20xx年1月1日至20xx年1月1日。

第三条 专利和商标的使用

3.1. 按合同的规定生产、使用和销售该产品外，不经乙方同意，甲方公司不 得使用其专利、技术和商标。

3.2. 事先未得到书面同意，甲方公司不得对所生产的产品进行修改。甲方公司生产的产品与乙方生产的产品质量应相同。乙方有权采取任何必要的措施确保 甲方公司的产品达到规定的质量水平。

3.3. 合营公司按照双方的议定，在销售产品上须标志商标时，应标明该产品 是按乙方的许可制造。

第四条 第三方伪造及侵权

甲方公司若发现有任何伪造的产品、或侵犯专利或商标时，应立即通知乙方。 虽然，仅乙方独家拥有对第三方伪造的产品、侵犯专利或商标的行为采取追究甚至是诉讼(或采取其他行动)的权利，但乙方对甲方公司就上述有关情况而提出的各种建议，应给予充分考虑。为此，乙方可以甲方公司名义作原告或双方联合作原告，合营公司对此不应无理由的予以拒绝，但须先取得甲方公司的书面同意。

第五条 递交程序说明书

5.1 按合同规定，乙方应向甲方提交完整的技术程序说明书包括：设计、计算、图纸、生产工艺、质量控制、测试、安装调整、操作和维护方法。所提供协议

涉及的产品的必须与小灵猫公司的产品相同。

5.2 按合同规定，乙方必须保证技术文件的递交不受任何第三方任何指控。

第六条 技术培训

6.1. 按合同规定，乙方应向甲方公司提供技术培训，以提高公司雇员的技术水平。

6.2. 乙方同意向合营公司选拔的雇员按下述技术范围提供培训：C10103 小灵猫产 品的制造、发展、销售和使用;加工生产及有关工厂实习。

6.3. 乙方不提供与制造、销售或维修保养该产品无直接关系的任何事宜的培训，亦不提供乙方对第三方承担有保密义务项目的培训。

6.4. 培训人数和内容、地点、期限及其他有关培训事宜由如下合营公司与乙方商定。

6.5. Crocs公司若需要乙方派遣指导人员、技术专家及有关管理人员至Crocs公 司对公司人员进行培训，Crocs公司应支付聘请人员从受雇地至合营公司的全部差旅费及在Crocs公司期间的住宿、膳食及生活津贴费用。

6.6. 按本合同规定，合营公司属下的雇员凡参加并完成由乙方提供的培训计划者，自培训完结后3年内，不得向合营公司提出辞职。

第七条 提成费

7.1. 在本合同及其附件生效后3天内，合营公司应支付售出该产品的总 销售额1%的提成费。其提成费应根据该产品的数量计算。

7.2. 按合同附件规定的提成费应从得到该项技术之日起执行1年以后，每 年递减0.1%。

第八条保 密

合营公司承认并同意在合同期内由乙方提供的技术系属秘密。合营公司及其 全体雇员和工作人员应按合同列明的目的使用其技术。在未得到乙方事先书面同意，不得向任何第三者公开或透露此技术。自签署合同至终止合同，该项技术的保密期限为20xx年。

第九条 仲 裁

9.1. 凡因本合同引起的或与本合同有关的任何争议，均应提交中国国际经济贸易仲裁委员会，按照申请仲裁时该会现行有效的仲裁规则在深圳进行仲裁，仲裁裁决是终局的，对双方均有约束力。仲裁适用中华人民共和国法律。

9.2 除非另有规定，仲裁不得影响合同双方继续履行合同所规定的义务。

第十条 不可抗力

10.1. 双方遇有无法控制的事件或情况应视为不可抗力事件，但不限于火灾、 风灾、水灾、地震、爆炸、战争、叛乱、暴动、传染病及瘟疫。若遭受不可抗力 事件的一方导致另一方不能履行合同规定的义务时，应将履行合同的时间延长， 延长至与发生不可抗力事件所延误的时间相等。

10.2. 遭受不可抗力事件影响的一方立即用电话或传真将发生不可抗力的事 件通知另一方，并于15天内用航空挂号

信将有权证明的机构出具的发生不可抗力 事件的证明书寄给另一方。若因不可抗力引起的延误时间超过60天时，双方应通 过友好协商进一步解决履行合同事宜。

第十一条 合同文字和工作语言

11.1.本合同及附件中、英文书就，两种文字均具有同等法律效力，中英文 不一致的，以中文为准。

11.2 合营公司的重要文件，一律用中、英文书就，两种文字均具有同等法律效力。双方同意用英语和汉语为工作语言。

第十二条 其 他

12.1. 本合同中的标题，仅为醒目参考用，不影响本合同的意义和解释。

12.2. 合同的中、英文本各一式两份，每种文本双方各持 份。

12.3. 甲、乙方及合营公司之间的通讯来往均以中、英文为准。

12.4. 按本同规定任何一方发出的通知或通讯，应以书面文字为准并按对方 所列的上述地址寄出后 天，视为有效送达。

甲 方(签章)：_________ 乙方(签章)：________________

授权代表(签字)：________ 授权代表(签字)：_______________

___ 年___ 月___日于______ 年___月 ___日___于______

甲方：__________

乙方：__________

第一条

1.应甲方邀请，乙方同意派遣名工程师组成的中国技术服务组，于__________年__________月__________日赴约;

2.在受甲方邀请的乙方中国技术服务人员应有准备，并且愿意同甲方的公司共同工作。

第二条

乙方人员在期间，应服从甲方国家的法律，受甲方的管理规章制度约束。

第三条

1.甲方负责向乙方人员支付乙方提出的每人每月的免税技术服务费。

上述免税技术服务费的__________%应以美元支付。

本条款提及的技术服务费自乙方人员到达之日起开始计算。

2.在甲方服务期间，乙方人员在工作或业余的全部时间内，应保证行为端正。

甲方对乙方人员在甲方服务期间的犯罪行为不承担责任。

第四条

甲方负担乙方人员往返中国和的国际旅费和每人不超过20公斤的超重行李费，并负责安排机票。

第五条

1.第三条1款中所提的技术服务费的__________%应以币支付给在的中国服务组，其余__________%应由甲方按银行当日公布的兑率折成美元。

2.所折成的美元应电汇中国银行转汇北京中国银行营业部公司号账号。

3.甲方应以书面形式将汇票情况通知中国驻甲方国大使馆经参处。

第六条

甲、乙双方执行合同期间，甲方同意：

1.为乙方技术服务组人员提供设备齐全的住宿;

2.为乙方技术服务组人员提供交通工具;

3.提供乙方必要和充分的劳保用品;

4.为乙方技术人员提供人寿保险;

5.为乙方技术服务人员提供足够的办公设施和用品;

6.在指定的医院或诊所为技术服务组人员提供医疗，但不包括镶牙、配镜和性病的治疗。

7.乙方技术服务组人员因公出差，应按照甲方人员待遇，发给出差补助费，以币支付给乙方技术服务组。

第七条

合同期间，乙方技术人员享受中、两国的全部公共假日。

第八条

1.乙方人员每年享受三十天的休假，工资照发。休假间工资应全部以美元支付。

2.乙方技术人员每年应得元的奖金，奖金的__________%以美元支付。

3.在甲方服务期间，甲方为乙方技术人员回国休假提供往返经济舱机票。

第九条

甲方还同意为乙方人员办理移民手续，其中包括：

1.办理出入境签证;

2.为乙方人员办理合同规定雇用期间的长期居住许可;

3.承担本条1和2款所产生的费用。

第十条

在合同期间内，乙方技术人员由于家庭不幸或其它原因，可请紧急事假十天。

1.准予乙方人员事假时，甲方不负责：

乙方事假人员旅费;

本合同第三条1款中所规定的技术服务费;

因乙方人员事假期满后不能返回而换人时所需费用。

2.乙方应负责：

从国内另行换人，替换不能返回甲方服务的技术人员;

承担换人所需的全部费用。

因乙方人员事假期满后不能返回而换人时所产生的费用。

3.在合同期间内，由于甲方或所在国原因，致使乙方人员不能工作时，甲方同意：向乙方技术人员支付双方同意的技术服务费款;

因甲方原因终止合同、甲方违反合同或阻挠合同履行时，甲方同意。

第十一条

1.乙方技术人员因身体不好或工伤，在两个月内不能痊愈时，乙方同意：

从中国另行派人替换上述人员;

承担替换人员从中国到的旅费。

甲方同意承担因病或工伤返回中国人员的旅费。

2.在合同期间内，技术服务组人员因工伤致残或死亡，甲方同意：

处理事故、工伤或死亡的一切善后事宜;

负担所产生的费用;

按现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。

第十二条

本合同未尽事宜，由双方通过友好协商解决。

双方对本合同的解释如有不同意见，发生分歧和争执，或由本合同产生或与本合同有关的其它事项，应根据的现行法律，提交双方均能接受的唯一仲裁人解决。

第十三条

本合同的执行从__________年__________月__________日开始，有效期限共__________年，此为第一阶段。

__________年合同期满后，双方应进一步商定延续合同期限和与之有关的条件。

第十四条

本合同共两份，分别用中、文写成，双方各执一份。两种文本具有同等效力，并对双方均有约束力。

甲乙双方于上述日期签字盖章为证。

甲方签字人：__________

乙方签字人：__________

时间：__________

甲方：

乙方：

甲乙双方本着互相信任、真诚合作的原则，经双方友好协商，就乙方为甲方提供技术支持服务达成一致意见，特签订本合同。

一、合同适用说明

本合同适用于首次购买乙方软件产品及需要乙方技术服务的用户。甲乙双方签订本合同，表明甲方接受乙方所提供的标准服务;否则，视甲方主动放弃乙方所提供的服务。

二、服务内容

2.1乙方提供的服务内容：

产品标准培训：乙方负责承担甲方所产品的标准培训。热线支持：指乙服务人员通过电话向用户提供技术问题解答的过程。现场维护：指乙方派遣技术人员到用户现场处解决问题的过程。功能改进：指根据甲方要求对软件功能进行和改动。

2.2乙方的服务承诺：

乙方接到甲方通过电话，信函，传真，电子邮件等方式提出关于软件的服务请求后，在当日内给予响应并提供服务。

乙方提供给甲方的服务，必须按照合同规定的服务内容进行。

三、甲方责任

1.甲方应确保有专人对软件的使用和管理负责。

2.甲方应建立相关制度，以确保软件运行环境的安全，为软件正常运行提供保障。

3.甲方定期做好系统数据备份，并对备份数据进行妥善保管。

4.甲方在应用过程中发现软件出现异常，应及时与乙方取得联系，并记录当前故障现象，便于乙方作出诊断。

5.甲方在乙方服务人员服务完成后，配合检查软件系统运行是否正常。

四、收费办法和合同期限

年服务费为。

在甲方支付全款后个工作日，乙方提供等额增值税专用发票。

合同有效期:自年月日至2年月日止，期满合同自动中止。

合同合同满后，双方协商，甲方可要求乙方继续提供软件运行维护服务，但双方必须重新签署新的服务合同。

五、争议处理

甲乙双方如对协议条款规定的理解有异议，或者对与有关的事项发生争议，双方应本着友好合作的精神进行协商。协商不能解决的，依照《中华人民共和国民法典》，任何一方可向原告方所在地的人民法院起诉。

六、其他

本合同未尽事宜，由甲乙双方协商后产生书面文件，作为本合同的补充条款，具备与本合同同等法律效力。

对本合同内容的任何修改和变更需用书面形式，并经双方签字确认后生效。

本合同一式两份，为双方唯一的正式协议，其他任何方案，口头说明及与本项目有关的信函、传真、邮件等，均以本合同为准。

甲方：_________乙方：_________

法定代表人：_________法定代表人：_________

_________年____月____日_________年____月____日

编号：______________________

甲方：______________________

乙方：______________________

签订日期：_________________

北京市劳动和社会保障局监制

根据《中华人民共和国劳动法》、《中华人民共和国劳动合同法》和有关法律、法规，甲乙双方经平等自愿、协商一致签订本合同，共同遵守本合同所列条款。

一、劳动合同双方当事人基本情况

第一条甲方

法定代表人：________________

注册地址：________________

经营地址：________________

第二条乙方

性别：________________

户籍类型：________________(非农业、农业)

居民身份证号码：________________

在甲方工作起始时间______年______月______日

家庭住址：________________

在京居住地址：________________

户口所在地省(市)______区(县)街道(乡镇)

二、劳动合同期限

第三条本合同为无固定期限劳动合同。

本合同于______年______月______日生效，其中试用期至______年______月______日止。

三、工作内容和工作地点

第四条乙方同意根据甲方工作需要，担任_______岗位(工种)工作。

第五条根据甲方的_______岗位(工种)作业特点，乙方的工作区域或工作地点为

第六条乙方工作应达到标准。

四、工作时间和休息休假

第七条甲方安排乙方执行工时制度。

执行标准工时制度的，乙方每天工作时间不超过8小时，每周工作不超过40小时。每周休息日为

甲方安排乙方执行综合计算工时工作制度或者不定时工作制度的，应当事先取得劳动行政部门特殊工时制度的行政许可决定。

第八条甲方对乙方实行的休假制度有

五、劳动报酬

第九条甲方每______月______日前以货币形式支付乙方工资，月工资为____________元或按执行。

乙方在试用期期间的工资为____________元。

甲乙双方对工资的其他约定

第十条甲方生产工作任务不足使乙方待工的，甲方支付乙方的月生活费为____________元或按执行。

六、社会保险及其他保险福利待遇

第十一条甲乙双方按国家和北京市的规定参加社会保险。甲方为乙方办理有关社会保险手续，并承担相应社会保险义务。

第十二条乙方患病或非因工负伤的医疗待遇按国家、北京市有关规定执行。甲方按支付乙方病假工资。

第十三条乙方患职业病或因工负伤的待遇按国家和北京市的有关规定执行。

第十四条甲方为乙方提供以下福利待遇

七、劳动保护、劳动条件和职业危害防护

第十五条甲方根据生产岗位的需要，按照国家有关劳动安全、卫生的规定为乙方配备必要的安全防护措施，发放必要的劳动保护用品。

第十六条甲方根据国家有关法律、法规，建立安全生产制度;乙方应当严格遵守甲方的劳动安全制度，严禁违章作业，防止劳动过程中的事故，减少职业危害。

第十七条甲方应当建立、健全职业病防治责任制度，加强对职业病防治的管理，提高职业病防治水平。

八、劳动合同的解除、终止和经济补偿

第十八条甲乙双方解除、终止劳动合同应当依照《中华人民共和国劳动合同法》和国家及北京市有关规定执行。

第十九条甲方应当在解除或者终止本合同时，为乙方出具解除或者终止劳动合同的证明，并在十五日内为乙方办理档案和社会保险关系转移手续。

第二十条乙方应当按照双方约定，办理工作交接。应当支付经济补偿的，在办结工作交接时支付。

九、当事人约定的其他内容

第二十一条甲乙双方约定本合同增加以下内容：

十、劳动争议处理及其它

第二十二条双方因履行本合同发生争议，当事人可以向甲方劳动争议调解委员会申请调解;调解不成的，可以向劳动争议仲裁委员会申请仲裁。

当事人一方也可以直接向劳动争议仲裁委员会申请仲裁。

第二十三条本合同的附件如下

第二十四条本合同未尽事宜或与今后国家、北京市有关规定相悖的，按有关规定执行。

第二十五条本合同一式两份，甲乙双方各执一份。

甲方(公章)____________乙方(签字或盖章)____________

法定代表人____________

签订日期：_____________

劳动合同变更书

经甲乙双方协商一致，对本合同做以下变更：______________________

甲方(公章)____________乙方(签字或盖章)______

法定代表人____________

______年______月______日

甲方：______________________

乙方：______________________

签订日期：__________________

甲方：__________________________

乙方：__________________________

为共同做好学生的实习工作，明确实习学生与实习单位的责任与义务，根据国家有关法律、法规，本着平等自愿的原则，经甲乙双方协商一致，签订本合同。

一、实习期限及工作时间

乙方_________到甲方实习，实习时间自_________年_______月_______日起至_________年_______月_______日止。

甲方应根据相关法律法规及本单位规章制度，合理安排实习学生的实习工作时间。

二、实习岗位

甲方根据乙方的实际情况和工作需要，安排实习学生到_________部门，从事_________工作。

实习期间，甲方应安排技术人员与管理人员对实习学生进行业务培训、技术指导和日常管理，实习学生应自觉遵守劳动纪律，认真实习。

三、实习工资

1.依照按劳取酬的原则，按甲方现行制度确定实习学生的实习工资，月工资人民币______元。

四、实习期间应遵守以下规定

1.实习学生应遵守国家的法律法规;遵守甲方的实习规章及其它各项规章制度。如违反国家法规和企业的规章制度，甲方可以根据情节轻重给予必要的处分或终止实习。

2.因实习学生造成实习基地财物损失的，按甲方规定处理。

3.乙方如有事请假，应按工作单位规定提前请假。如无故缺勤，作旷工处理。

4.节假日及实习以外的时间由乙方自由支配，乙方的一切个人行为、后果责任自负。

五、培训

1、甲方负责乙方实习前的有关培训，以帮助乙方进入用工单位顺利实习。

2、甲方对乙方有进行职业道德、安全生产和安排上岗前培训的义务。如需乙方从事特种作业，应经过专门培训再上岗。

六、劳动保护

1.甲方需为实习学生提供符合国家规定的安全卫生的工作环境，保证其在人身安全不受危害的环境条件下工作。

2.因学生在实习期间已在学校购买了意外及疾病保险，实习期间乙方发生意外或疾病的，由乙方向学校及投保单位索赔损失，不需甲方承担责任和损失。根据法律规定，乙方实习期间，甲方也不需要为乙方缴纳社会保险。

七、合同解除

1、乙方在本合同履行期间可以在说明原因的情况下向甲方提出终止实习合同，但必须提前30天通知甲方。

2、乙方离职时，需依甲方的规定办妥移交手续。

3、乙方离职手续未经核准前不得擅自离岗，否则按旷工处理。

4、实习期间，甲方如发现实习学生不符合实习要求或不适宜甲方安排工作等情况的，可以向乙方提出终止实习，在为实习学生履行实习工资支付手续后，解除本合同。

5、乙方离职后甲方不再承担任何责任。

八、乙方在已阅读甲方的《劳动合同》的前提下签署此协议。

九、法律效力

本合同正本一式两份，双方各执一份，经甲乙双方签字、盖章之日起生效。

甲方：________________乙方：________________

甲方代表：________________身份证号码：________________

____________年________月________日________年________月________日

甲方因业务工作需要，聘请乙方担任经济和法律顾问。经双方协商，特订立本合同。

一、乙方接受甲方聘请，指派_______________担任甲方常年经济和法律顾问。

二、法律顾问的工作方式

经济、法律顾问应每月与甲方联系_____次。甲方遇有急需解决的事宜，可随时与乙方联系。

三、法律顾问的工作范围

1 经济和法律咨询，就甲方决策、经营、管理中的重大事项提供法律意见和建议;

2 应甲方要求草拟、审查、修改法律事务文书;

3. 指导或代理甲方参与经济、贸易、科技等项目考察、论证、商务谈判、签约;

4. 代理甲方参与调解、仲裁和诉讼活动;标的数额3万元以上的，应另订委托合同，乙方按规定收费;

5 帮助甲方健全合同管理制度，提高决策、经营和管理水平，为甲方培养合同和其他法律人才。

四、顾问费

为每年________元

支付方式按照双方当事约定的方式。

五、本合同有效期_________年。自双方签订之日起生效。合同期满，甲方需继续聘请法律顾问，经双方协商同意可续订合同。解除合同，须经双方协商同意。

六、本合同一式_______份，双方各持______份。

甲方(盖章)__________

法定代表人：__________

乙方(盖章)__________

法定代表人：__________

______年______月____日

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)