0代理进口合同_合同范本
代理进口合同（二）
合同编号：_________
签约地点：_______________市
甲方：_________________大学
乙方：_____________________
?
依照《中华人民共和国合同法》，根据____________大学采购______________项目（项目编号：_____________）的谈判（招标）文件和乙方报价（投标）文件及《成交通知书》（《中标通知书》），甲乙双方就本项目子包标的物采购事项签订本合同， 以兹信守：
一、乙方代理甲方进口下表所列货物（下称：货物）
货物名称及规格
型号
产地及厂家
计量
单位
数量
单价rmb
金额rmb
合计人民币金额(大写): 万 仟 佰 拾 元 角 分（￥______元）
二、由乙方负责办理与本合同货物进口相关的全部事项；甲方提供因进口本合同货物免缴海关关税所需的文件资料，并协助乙方办理进口货物的海关免税手续。
三、甲方向乙方支付本合同货物价款为合同总金额：人民币__________________（￥________元），其中包含货物的价款及其进口有关各项手续费款以及清关、包装、运输、保险、交货到甲方指定地点和商检报验等费用。
四、付款方式
1.首期货款：本合同签字生效之日起在甲方收到乙方通知和收款凭证资料的10个工作日内，甲方首期按合同总金额的百分之九十五价款￥______元 付给乙方；乙方应即时开出期限为90天的全额l/c；乙方并须在本合同货物交货时一倂向甲方交付全额的合法有效的完税或免税发票凭证；
2.末期付款：剩余的百分之五货款￥______元，甲方在验收合格之日起一年后凭质保证明及乙方的通知和发票凭证资料支付给乙方。
3.具备条件的乙方，也可以不采用本条款前述的支付方式，而另行选择采用下述由银行出具《质量服务担保函》的方式，进行合同价款的支付结算：乙方在货物安装调试完毕交由甲方验收合格签章确认交付使用之日起的十五个工作日内，向甲方提供银行出具的合法有效《质量服务担保函》（该担保函文中须保证所担保事项的有效期为壹周年，并担保按合同总价的百分之五价款须在合同货物设备经甲方正常使用壹周年之后，甲方在该担保函文中签章确认对所担保的质量技术及服务事项均履行完成无误后，银行方可据此退还担保价款给乙方；否则，银行保证按该担保函文所担保的价款款额全数无条件即时转划给甲方收用）文书，甲方收到并确认乙方提交的该担保函文为合法有效的担保文件及完整的发票凭证资料后，在十五个工作日内递交结算凭证资料给______市财政国库支付执行机构办理财政国库集中支付手续，并由其向乙方核拨合同总价百分之百的全额价款进行结算。
五、交货时间与地点：在乙方收到甲方首期货款后的60个日历天内交货到甲方指定的校区地点。
六、本合同货物到货后的5个工作日内由甲方进行货物外观和数量的验收，并在10个工作日内完成质量验收；乙方负责报验商检，甲方予以协助；如发现货物的数量、品种、质量与本合同所规定的不符时，乙方须在本合同规定的交货期限（即l/c兑付期限）到期前的10天内，向甲方提供商检部门出具的检验文件，以便甲方协助乙方对外索赔，索赔费用由乙方及其联合体成交供应商承担。
共2页，当前第1页12
更多相似范文
篇1：货物进口报关代理合同
委托代理协议
甲方：
乙方：
甲乙双方本着互惠互利的原则，经友好协商，依据中华人民共和国合同法的相关规定达成如下协议：
一、 甲方责任：
1. 甲方负责及时向乙方提供进口货物报关、报验及提货所需的全套资料，以便乙方办理货物通关手续;
2. 甲方负责提前通知乙方货物的流向、数量;
3. 甲方负责及时支付乙方的代理包干费及实报实销的费用;
4. 如甲方需要乙方代办国内铁路或水路运输，需传真确认到货地点、收货人、件数等;
5. 甲方及时审核乙方开立的费用发票，在无误的情况下及时向乙方支付。
二、 乙方责任：
1. 乙方接受甲方的委托，作为甲方的港口货运代理人，代甲方办理报关、报检和接卸仓储工作;
2.乙方接到甲方的有关单据并根据甲方提供的船名从速办理报关、报检及发运、仓储工作，如因乙方的懈怠影响货物通关、装运等工作，乙方承担相应的压箱费、堆存费、滞港费等相关费用;
3. 在货物接卸期间，对第三方原因产生的溢短残损乙方应及时以书面形式通知甲方并协助甲方办理有关索赔事宜;
4. 乙方负责在海关结关后十五个工作日内将海关核退的进口付汇报关单及关税、增值税税单正本邮寄给甲方，若有延误，造成的损失由乙方承担。
三、 费用标准
1. 40英尺标准集装箱
1) 如应甲方要求，乙方只负责接货到港区提货为止，乙方负责掏箱、装车。甲方支付乙方一次性包干费：1100元/40尺。
2) 甲方指定仓库交货：港口至天津地区：包干费 1500元/40尺。港口至塘沽地区：包干费1200元/40尺。以上费用不包括关税，增值税，商检费。THC费用实报实销。
2.散货
港区提货：
1) 舱底交货：一次性包干费35元/吨+舱底交货费(实单转)。
2) 船边交货：一次性包干费35元/吨。
运至甲方指定仓库运费：
1) 港口至天津地区：22元/吨。
2) 港口至塘沽地区：10元/吨。
铁路运费、铁路装车费根据乙方提供的铁路货运单据实报实销。 以上费用不包括关税，增值税，商检费。
3. 仓储费用:每天0.13元/空干吨，入库费6元/空干吨，出库费10元/空干吨，由提货方承担。出库时乙方凭甲方出库单并向甲方电话确认后方可放货。乙方负责妥善保管入库货物，严格做到按集装箱号存放，并做好防火、防盗、防雨，严禁不盖篷布存放。仓储费用每月结算一次，乙方将费用明细表及发票邮寄于甲方，甲方接到发票审核无误后将款项及时支付给乙方。
四、 其它条款
1. 乙方提供费用发生的票据抬头均按“绥芬河市三都纸业有限责任公司”开立，如有特殊要求的，甲方以书面形式传真乙方为准。
2. 本协议一式两份，甲乙双方各执一份，双方签字盖章后生效。未经更改的传真件同具法律效力。
3. 本协议未尽事宜及违约责任按《中华人民共和国经济合同法》有关规定执行。
篇2：出口销售合同
出口销售合同范本（1）
卖方：地址：邮码：电话：法定代表人：职务：
买方：地址：邮码：电话：法定代表人：职务：
卖方与买方在平等、互利基础上，经双方协商一致同意按下列条款履行，并严格信守。
第一条货物名称、规格、包装及质量
第二条数量、单价、总值
卖方有权在3％以内多装或少装。
上述价格内包括给买方佣金____％按fob值计算。
第三条装运期限
第四条装运口岸
第五条目的口岸
第六条保险：由卖方按发票金额__％投保。
第七条付款条件：买方应通过买卖双方同意的银行，开立以卖方为受益人的、不可撤销的、可转让和可分割的、允许分批装运和转船的信用证。该信用证凭装运单据在________国的____银行见单即付。
该信用证必须在____前开出。信用证有效期为装船后15天在________国到期。
第八条单据：卖方应向银行提供已装船清洁提单、发票、装箱单/重量单；如果本合同按cif条件，应再提供可转让的保险单或保险凭证。
第九条装运条件
1.载运船只由卖方安排，允许分批装运并允许转船。
2.卖方于货物装船后，应将合同号码、品名、数量、船只、装船日期以电报通知买方。
第十条品质和数量/重量的异议与索赔：货到目的口岸后，买方如发现货物品质及/或数量/重量与合同规定不符，除属于保险公司及/或船公司的责任外，买方可以凭双方同意的检验机构出具的检验证明向卖方提出异议。品质异议须于货到目的口岸之日起30天内提出，数量/重量异议须于货到目的口岸之日起15天内提出，卖方应于收到异议后30天内答复买方。
第十一条不可抗力
由于不可抗力使卖方不能在本合同规定期限内交货或者不能交货，卖方不负责任。但卖方必须立即电报通知买方。如果买方提出要求，卖方应以挂号函向买方提供由有关机构出具的事故的证明文件。
第十二条争议解决途径
因执行本合同有关事项所发生的一切争执，应由双方通过友好方式协商解决。如果不能取得协议时，则在被告国家根据被告国家仲裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的，对双方具有同等的约束力，仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。
卖方：____________(盖章)
代表人：____________
买方：____________(盖章)
代表人：____________
____年__月__日订立
出口销售合同范本（2）
卖方：地址：邮码：电话：法定代表人：职务：
买方：地址：邮码：电话：法定代表人：职务：
卖方与买方在平等、互利基础上，经双方协商一致同意按下列条款履行，并严格信守。
第一条货物名称、规格、包装及质量
第二条数量、单价、总值
卖方有权在3%以内多装或少装。
上述价格内包括给买方佣金____%按fob值计算。
第三条装运期限
第四条装运口岸
第五条目的口岸
第六条保险：由卖方按发票金额__%投保。
第七条付款条件：买方应通过买卖双方同意的银行，开立以卖方为受益人的、不可撤销的、可转让和可分割的、允许分批装运和转船的信用证。该信用证凭装运单据在________国的____银行见单即付。
该信用证必须在____前开出。信用证有效期为装船后15天在________国到期。
第八条单据：卖方应向银行提供已装船清洁提单、发票、装箱单/重量单;如果本合同按cif条件，应再提供可转让的保险单或保险凭证。
第九条装运条件
1.载运船只由卖方安排，允许分批装运并允许转船。
2.卖方于货物装船后，应将合同号码、品名、数量、船只、装船日期以电报通知买方。
第十条品质和数量/重量的异议与索赔：货到目的口岸后，买方如发现货物品质及/或数量/重量与合同规定不符，除属于保险公司及/或船公司的责任外，买方可以凭双方同意的检验机构出具的检验证明向卖方提出异议。品质异议须于货到目的口岸之日起30天内提出，数量/重量异议须于货到目的口岸之日起15天内提出，卖方应于收到异议后30天内答复买方。出口销售合同范本由精品信息网整理！
第十一条不可抗力
由于不可抗力使卖方不能在本合同规定期限内交货或者不能交货，卖方不负责任。但卖方必须立即电报通知买方。如果买方提出要求，卖方应以挂号函向买方提供由有关机构出具的事故的证明文件。
第十二条争议解决途径
因执行本合同有关事项所发生的一切争执，应由双方通过友好方式协商解决。如果不能取得协议时，则在被告国家根据被告国家仲裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的，对双方具有同等的约束力，仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。
卖方：____________(盖章)
代表人：____________
买方：____________(盖章)
代表人：____________
____年__月__日订立
篇3：空运出口运输协议
甲方：
乙方：
为了保证我方承接的渣场复耕土收集工程按时保质，安全顺利的完成，甲方将租用乙方挖机及运输车进行4#支洞渣场复耕土开挖、收集、运输的施工。经双方协商，达成以下协议：望双方共同遵守执行：
一、工程任务：
1. 4#支洞渣场复耕土开挖、收集、运输。
二、挖机租用方式及运输车运输单价计算方式、运距
1. 挖机及运输车辆由乙方提供。
2：挖机以小时计算，挖机正常工作时间为计价的有效时间。每天挖机正常工作时间由双方签字确认。租用单价为每小时人民币：贰佰壹拾元整 (油料由甲方提供)。
3：运输车按每车实际方量计算，运输单价为每立方人民币： 叁元整 (包括车辆所需所有费用)。运距在渣场500米以内由甲方指定地点卸碴。
三、甲方的权利及义务
从进场即日起乙方必须保证出碴车辆及挖机的正常使用，不能因车辆不足、车辆以及挖机故障影响工程进度。
四、乙方的权利及义务
1：乙方的车辆、挖机及人员在施工中必须遵守甲方一切正常规定不得违规，否则后果自负。
3：乙方不得因故中途提出毁约，否则乙方赔偿甲方损失。
4：完成甲方交给的其它工作。未定事议甲乙双方协商解决。本合同一式两份，自双方签字之日起生效。
甲方(公章)：_________ 乙方(公章)：_________
法定代表人(签字)：_________ 法定代表人(签字)：_________
_________年____月____日 _________年____月____日
篇4：货物进口合同Purchase Con_合同范本
合同编号（Contract No.） ：＿＿＿＿＿＿＿
签订日期（Date） ：＿＿＿＿＿＿＿＿＿＿＿
签订地点（Signed at） ：＿＿＿＿＿＿＿＿＿
买方：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
The Buyer：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
地址： ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
Address： ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
电话（Tel）：___＿＿＿＿＿＿＿＿ 传真（Fax）：＿＿＿＿＿＿＿＿＿＿
电子邮箱（E-mail）：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
卖方：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
The Seller：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
地址：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
Address： ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿_＿
电话（Tel）：_＿＿＿＿＿＿＿＿ 传真（Fax）：＿＿＿＿＿＿＿＿＿＿＿
电子邮箱（E-mail）：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿
买卖双方同意按照下列条款签订本合同：
The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below：
1.货物名称、规格和质量（Name， Specifications and Quality of Commodity）：
2. 数量（Quantity）：
允许＿＿＿＿的溢短装（＿＿＿% more or less allowed）
3. 单价（Unit Price）：
4. 总值（Total Amount）：
5. 交货条件（Terms of Delivery） FOB/CFR/CIF＿＿＿＿＿＿＿
6. 原产地国与制造商 （Country of Origin and Manufacturers）：
7. 包装及标准（Packing）：
货物应具有防潮、防锈蚀、防震并适合于远洋运输的包装，由于货物包装不良而造成的货物残损、灭失应由卖方负责。卖方应在每个包装箱上用不褪色的颜色标明尺码、包装箱号码、毛重、净重及“此端向上”、“防潮”、“小心轻放”等标记。
The packing of the goods shall be preventive from dampness， rust， moisture， erosion and shock， and shall be suitable for ocean transportation/ multiple transportation. The Seller shall be liable for any damage and loss of the goods attributable to the inadequate or improper packing. The measurement， gross weight， net weight and the cautions such as “Do not stack up side down”， “Keep away from moisture”， “Handle with care” shall be stenciled on the surface of each package with fadeless pigment.
8. 唛头（Shipping Marks）：
9. 装运期限（Time of Shipment）：
10. 装运口岸（Port of Loading）：
11. 目的口岸（Port of Destination）：
12. 保险（Insurance）：
由＿＿＿＿按发票金额110%投保＿＿＿＿＿险和＿＿＿＿＿附加险。
Insurance shall be covered by the ________ for 110% of the invoice value against _______ Risks and __________ Additional Risks.
13. 付款条件（Terms of Payment）：
（1） 信用证方式：买方应在装运期前/合同生效后＿＿日，开出以卖方为受益人的不可撤销的议付信用证，信用证在装船完毕后＿＿日内到期。
Letter of Credit： The Buyer shall， ______ days prior to the time of shipment /after this Contract comes into effect， open an irrevocable Letter of Credit in favor of the Seller. The Letter of Credit shall expire ____ days after the completion of loading of the shipment as stipulated.
（2） 付款交单：货物发运后，卖方出具以买方为付款人的付款跟单汇票，按即期付款交单（D/P）方式，通过卖方银行及＿＿＿＿＿银行向买方转交单证，换取货物。
Documents against payment： After shipment， the Seller shall draw a sight bill of exchange on the Buyer and deliver the documents through Sellers bank and ______ Bank to the Buyer against payment， i.e D/P. The Buyer shall effect the payment immediately upon the first presentation of the bill（s） of exchange.
（3） 承兑交单：货物发运后，卖方出具以买方为付款人的付款跟单汇票，付款期限为＿＿＿＿后＿＿日，按即期承兑交单（D/A＿＿日）方式，通过卖方银行及＿＿＿＿＿＿银行，经买方承兑后，向买方转交单证，买方在汇票期限到期时支付货款。
Documents against Acceptance： After shipment， the Seller shall draw a sight bill of exchange， payable_____ days after the Buyers delivers the document through Sellers，ank and _________Bank to the Buyer against acceptance （D/A___ days）。 The Buyer shall make the payment on date of the bill of exchange.
（4） 货到付款：买方在收到货物后＿＿天内将全部货款支付卖方（不适用于 FOB、CRF、CIF术语）。
Cash on delivery （COD）： The Buyer shall pay to the Seller total amount within ______ days after the receipt of the goods （This clause is not applied to the Terms of FOB， CFR， CIF）。
14. 单据（Documents Required）：
卖方应将下列单据提交银行议付/托收：
The Seller shall present the following documents required to the bank for negotiation/collection：
（1） 标明通知收货人/受货代理人的全套清洁的、已装船的、空白抬头、空白背书并注明运费已付/到付的海运/联运/陆运提单。
Full set of clean on board Ocean/Combined Transportation/Land Bills of Lading and blank endorsed marked freight prepaid/ to collect；
（2） 标有合同编号、信用证号（信用证支付条件下）及装运唛头的商业发票一式＿＿份；
Signed commercial invoice in ______copies indicating Contract No.， L/C No. （Terms of L/C） and shipping marks；
（3） 由＿＿＿＿＿＿出具的装箱或重量单一式＿＿份；
Packing list/weight memo in ______ copies issued by＿＿；
（4） 由＿＿＿＿＿＿出具的质量证明书一式＿＿份；
Certificate of Quality in _______ copies issued by＿＿＿＿；
（5） 由＿＿＿＿＿＿出具的数量证明书一式＿＿份；
Certificate of Quantity in ___ copies issued by＿＿＿＿；
（6） 保险单正本一式＿＿份（CIF 交货条件）；
Insurance policy/certificate in ___ copies （Terms of CIF）；
（7）＿＿＿＿签发的产地证一式＿＿份；
Certificate of Origin in ___ copies issued by＿＿＿＿；
（8） 装运通知（Shipping advice）： 卖方应在交运后_____ 小时内以特快专递方式邮寄给买方上述第＿＿项单据副本一式一套。
The Seller shall， within ____ hours after shipment effected， send by courier each copy of the above-mentioned documents No. ＿＿。
15. 装运条款（Terms of Shipment）：
（1） FOB交货方式
卖方应在合同规定的装运日期前30天，以＿＿＿＿方式通知买方合同号、品名、数量、金额、包装件、毛重、尺码及装运港可装日期，以便买方安排租船/订舱。装运船只按期到达装运港后，如卖方不能按时装船，发生的空船费或滞期费由卖方负担。在货物越过船弦并脱离吊钩以前一切费用和风险由卖方负担。
The Seller shall， 30 days before the shipment date specified in the Contract， advise the Buyer by _______ of the Contract No.， commodity， quantity， amount， packages， gross weight， measurement， and the date of shipment in order that the Buyer can charter a vessel/book shipping space. In the event of the Seller‘s failure to effect loading when the vessel arrives duly at the loading port， all expenses including dead freight and/or demurrage charges thus incurred shall be for the Seller’s account.
（2） CIF或CFR交货方式
卖方须按时在装运期限内将货物由装运港装船至目的港。在CFR术语下，卖方应在装船前2天以＿＿＿＿方式通知买方合同号、品名、发票价值及开船日期，以便买方安排保险。
The Seller shall ship the goods duly within the shipping duration from the port of loading to the port of destination. Under CFR terms， the Seller shall advise the Buyer by _________ of the Contract No.， commodity， invoice value and the date of dispatch two days before the shipment for the Buyer to arrange insurance in time.
16. 装运通知（Shipping Advice）：
一俟装载完毕，卖方应在＿＿小时内以＿＿＿＿方式通知买方合同编号、品名、已发运数量、发票总金额、毛重、船名/车/机号及启程日期等。
The Seller shall， immediately upon the completion of the loading of the goods， advise the Buyer of the Contract No.， names of commodity， loading quantity， invoice values， gross weight， name of vessel and shipment date by_________ within________hours.
17. 质量保证（Quality Guarantee）：
货物品质规格必须符合本合同及质量保证书之规定，品质保证期为货到目的港＿＿个月内。在保证期限内，因制造厂商在设计制造过程中的缺陷造成的货物损害应由卖方负责赔偿。
The Seller shall guarantee that the commodity must be in conformity with the quatity， specifications and quantity specified in this Contract and Letter of Quality Guarantee. The guarantee period shall be______months after the arrival of the goods at the port of destination， and during the period the Seller shall be responsible for the damage due to the defects in designing and manufacturing of the manufacturer.
18. 检验（Inspection）（以下两项任选一项）：
（1）卖方须在装运前＿＿日委托＿＿＿＿＿＿检验机构对本合同之货物进行检验并出具检验证书，货到目的港后，由买方委托＿＿＿＿＿＿＿＿检验机构进 行检验。
The Seller shall have the goods inspected by ______ days before the shipment and have the Inspection Certificate issued by____. The Buyer may have the goods reinspected by ________ after the goods，rrival at the destination.
（2） 发货前，制造厂应对货物的质量、规格、性能和数量/重量作精密全面 的检验，出具检验证明书，并说明检验的技术数据和结论。货到目的港后，买方将申请中国商品检验局（以下简称商检局）对货物的规格和数量/重量进行检验，如发现货物残损或规格、数量与合同规定不符，除保险公司或轮船公司的责任外，买方得在货物到达目的港后＿＿日内凭商检局出具的检验证书向卖方索赔或拒收该货。在保证期内，如货物由于设计或制造上的缺陷而发生损坏或品质和性能与合同规定不符时，买方将委托中国商检局进行检验。
The manufacturers shall， before delivery， make a precise and comprehensive inspection of the goods with regard to its quality， specifications， performance and quantity/weight， and issue inspection certificates certifying the technical data and conclusion of the inspection. After arrival of the goods at the port of destination， the Buyer shall apply to China Commodity Inspection Bureau （hereinafter referred to as CCIB） for a further inspection as to the specifications and quantity/weight of the goods. If damages of the goods are found， or the specifications and/or quantity are not in conformity with the stipulations in this Contract， except when the responsibilities lies with Insurance Company or Shipping Company， the Buyer shall， within _____ days after arrival of the goods at the port of destination， claim against the Seller， or reject the goods according to the inspection certificate issued by CCIB. In case of damage of the goods incurred due to the design or manufacture defects and/or in case the quality and performance are not in conformity with the Contract， the Buyer shall， during the guarantee period， request CCIB to make a survey.
19. 索赔（Claim）：
买方凭其委托的检验机构出具的检验证明书向卖方提出索赔（包括换货），由此引起的全部费用应由卖方负担。若卖方收到上述索赔后______天未予答复，则认为卖方已接受买方索赔。
The buyer shall make a claim against the Seller （including replacement of the goods） by the further inspection certificate and all the expenses incurred therefrom shall be borne by the Seller. The claims mentioned above shall be regarded as being accepted if the Seller fail to reply within ______days after the Seller received the Buyer‘s claim.
20. 迟交货与罚款（Late delivery and Penalty）：
除合同第21条不可抗力原因外，如卖方不能按合同规定的时间交货，买方应同意在卖方支付罚款的条件下延期交货。罚款可由议付银行在议付货款时扣除，罚款率按每＿＿天收＿＿%，不足＿＿天时以＿＿天计算。但罚款不得超过迟交 货物总价的____ %.如卖方延期交货超过合同规定＿＿天时，买方有权撤销合同，此时，卖方仍应不迟延地按上述规定向买方支付罚款。
买方有权对因此遭受的其它损失向卖方提出索赔。
Should the Seller fail to make delivery on time as stipulated in the Contract， with the exception of Force Majeure causes specified in Clause 21 of this Contract， the Buyer shall agree to postpone the delivery on the condition that the Seller agree to pay a penalty which shall be deducted by the paying bank from the payment under negotiation. The rate of penalty is charged at______% for every ______ days， odd days less than _____days should be counted as ______ days. But the penalty， however， shall not exceed_______% of the total value of the goods involved in the delayed delivery. In case the Seller fail to make delivery ______ days later than the time of shipment stipulated in the Contract， the Buyer shall have the right to cancel the Contract and the Seller， in spite of the cancellation， shall nevertheless pay the aforesaid penalty to the Buyer without delay.
The buyer shall have the right to lodge a claim against the Seller for the losses sustained if any.
21. 不可抗力（Force Majeure）：
凡在制造或装船运输过程中，因不可抗力致使卖方不能或推迟交货时，卖方不负责任。在发生上述情况时，卖方应立即通知买方，并在＿＿天内，给买方特快专递一份由当地民间商会签发的事故证明书。在此情况下，卖方仍有责任采取一切必要措施加快交货。如事故延续＿＿天以上，买方有权撤销合同。
The Seller shall not be responsible for the delay of shipment or non-delivery of the goods due to Force Majeure， which might occur during the process of manufacturing or in the course of loading or transit. The Seller shall advise the Buyer immediately of the occurrence mentioned above and within_____ days thereafter the Seller shall send a notice by courier to the Buyer for their acceptance of a certificate of the accident issued by the local chamber of commerce under whose jurisdiction the accident occurs as evidence thereof. Under such circumstances the Seller， however， are still under the obligation to take all necessary measures to hasten the delivery of the goods. In case the accident lasts for more than _____ days the Buyer shall have the right to cancel the Contract.
22. 争议的解决 （Arbitration）：
凡因本合同引起的或与本合同有关的任何争议应协商解决。若协商不成，应提交中国国际经济贸易仲裁委员会深圳分会，按照申请时该会当时施行的仲裁规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。
Any dispute arising from or in connection with the Contract shall be settled through friendly negotiation. In case no settlement is reached， the dispute shall be submitted to China International Economic and Trade Arbitration Commission （CIETAC），Shenzhen Commission， for arbitration in accordance with its rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties.
23. 通知（Notices）：
所有通知用＿＿＿＿文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后＿＿日内书面通知另一方。
All notice shall be written in _____ and served to both parties by fax/courier according to the following addresses. If any changes of the addresses occur， one party shall inform the other party of the change of address within ____days after the change.
24.本合同使用的FOB、CFR、CIF术语系根据国际商会《2000年国际贸易术语解释通则》。
The terms FOB、CFR、CIF in the Contract are based on INCOTERMS 2000 of the International Chamber of Commerce.
25. 附加条款 （Additional clause）：
本合同上述条款与本附加条款抵触时，以本附加条款为准。
Conflicts between Contract clause hereabove and this additional clause， if any， it is subject to this additional clause.
26. 本合同用中英文两种文字写成，两种文字具有同等效力。本合同共＿＿份，自双方代表签字（盖章）之日起生效。
This Contract is executed in two counterparts each in Chinese and English， each of which shall deemed equally authentic. This Contract is in ______ copies， effective since being signed/sealed by both parties.
买方代表（签字）：________________________
Representative of the Buyer
（Authorized signature）：___________________
卖方代表（签字）：_________________________
Representative of the Seller
（Authorized signature）：____________________
篇5：外贸业务员年终总结_业务员工作总结_网
年终总结是对一年内所有工作加以总结，分析和研究，肯定成绩，找出问题，得出经验教训，摸索事物的发展规律，用于指导下一阶段工作的一种书面文体。以下是小编整理的关于外贸业务员年终总结，供大家参考借鉴!
外贸业务员年终总结一
转眼间，我的20xx年外贸业务员生涯已经接近尾声，在新一年来临之际，回想自己一年20xx年外贸业务员多所走过的路，所经历的事，有过喜悦，有过兴奋，有过苦恼，有过忧郁，有过怀疑，苦辣酸甜都经历了和在经历着，没有太多的感慨，没有太多的惊喜，多了一份镇定，从容的心态。在这20xx年 外贸业务 即将结束，新的工作阶段就要开始的时候，有很多事情需要坐下来认真的思考一下，需要很好的进行总结和回顾。总结过去20xx年外贸业务 员工作中的经验教训，为下一阶段工作更好的展开做好充分的心理准备。
20xx年一年来，我作为一名 外贸业务员，一直负责外贸的单证及货款回收的工作。具体外贸工作如下：
一、跟货代联系订舱。
1，制作托书，托书上注明出运港，目的港，品名，件数，毛重。
2，索要进仓地址(送货通知)
二、制作银行交单所需 单证 (L/C)和客人所需 单证 (T/T)。
1，根据合同制作商业发票和装箱单。
2，和货代确认提单 。
3，到商检局做产地证。
4，根据信用证 要求制作所需单证。
三、银行交单。
如果可以押汇，准备押汇合同，申请书，出口合同，待银行审核 信用证 无误后办理相应的押汇手续。
四、 核销 。
核销单使用和收回时一定要做好登记，以防丢失。要及时做单证收齐，检查是否有到期未收回的 核销 单和漏开的出口商业发票。
跟单是一个看似简单的工作，其实在工作中对每一个环节都必须保持仔细，仔细，再仔细的的工作态度，因为如果我们在工作中出现的每一个失误都会带来非常多的麻烦和损失，例如我们在确认产地证， 提单 的时候出现失误，就会给公司带来一些不必要的损失，如果我们在做跟单时出现数字上的错误，那么带来的损失将是不可估量的。所以在我们今后的工作中一定要做到认真，细致。
为更好的做好跟单工作我认为要从以下几个方面入手：
1)在确认单证方面。我们一定要了解到单证对客户的重要性，可能在我们看来一个不起眼的错误到了我们客户那里将是一个非常的麻烦，甚至直接影响到客户的正常提货，所以也必须做到准确无误。
如：确认 提单 时需注意：出运港，目的港，客人的名称地址，通知人，发货人，件数，毛重(不要显示成了净重)，体积，逐字核对。
提单确认好后，待货物 报关 放行，装船开航后。让 货代 寄提单。需要付款买单的，先让他们开具发票，传真过来，凭传真件付款，寄单。
2)在做箱单方面。在我们得到产地证的时候我们就可以做箱单，做好以后先放好，在给客户寄单证以前每天检查几遍，这样可以非常有效的减免失误率。
3)对货款及单证，货物的跟踪。我们每发走一批货，寄走一套单证都要及时的跟踪直到收到客户的货款，才算是完成了这一票的跟踪。
跟单是一份细致的工作，由不得半点马虎，一点点的差错可能就会给公司带来较大的损失，在具体的工作过程中，作为一个新的销售跟单，我也曾犯过低级的错误，有些失误完全是可以避免的。
跟单的工作需要细心，还需要稳重，要做到这些，一是要从基本功上多下工夫，对业务熟练掌握;二是要主动培养自己严谨细致的习惯，无论面对什么样的事情，先要做到平心静气，不急不躁;三是要主动的与销售经理，与各个部门的同事沟通，做到不耻下问，不懂就问，有疑问就问;四是要有锲而不舍的精神，跟单在一开始可能是一件新奇的工作，时间长了可能会产生厌烦的情绪，这是需要避免的，无论从事什么性质的工作，都是在发挥自己的作用，只有坚持不懈才能不断进步。我想只有这样，才能把跟单这份工作做好，才能不断的提高自己的能力，从而为更进一步的发展打下良好的基础。
外贸业务员年终总结二
时间飞逝，不知不觉来到公司已经半年了，就快到过年的时候了。记得刚来的时候，由于经验的缺乏，是即兴奋又担心。最初是抱着学习和锻炼的态度来到这里的。半年下来，觉得自己学到了很多，也进步了很多，在生活和工作上都有了一个全新的体验。虽然没有什么大的贡献，但也算经历了一段不平凡的考验。在此，当然首先非常感谢公司给我这个机会，让我在工作中不断地学习，不断地进步，慢慢提升自身的素质，同时也非常感谢大家在这段时间对我的帮助。
走出学校，步入社会工作后，发现一切都比在学校的时候正规化，每天要准时上下班，每天要对着电脑坐一整天，现在的业务员离不开电脑，起先有点不适应，但慢慢地状态也就调整过来了。首先，先总结一下我半年来的工作情况。这半年来我主要是做以下这些事，最主要的当然还是负责网络发布这一块。记得刚来时不懂得如何发布，经过这段时间的发布，慢慢地有了新的体会，知道如何提升自己公司产品的曝光率。当然也会每天及时地更新我们公司的产品信息，并不定期地将一些新的产品发布到网站上去，充实我们的产品信息。半年下来，虽然并没有什么实质性的客户，但也会在一些免费网站上收到一些询盘，可见功夫并没有白费。因此以后还是会继续努力维护这些B2B网站。其次是对产品的了解。记得刚来时经常会下到生产车间了解设备，为此主管也为了让我们尽快对产品有一个大致的了解，让我们每周了解一台设备，彼此之间互相交流。现在我对公司的主营产品已经有了一个比较全面的了解。当然我们知道这还远远不够，我今后一定要努力去了解更多的产品，特别是其他厂家的。除此之外，平常我也会处理一些询盘。主管会将一些在阿里巴巴网站收到的询盘分配给我处理。当然我也会及时处理，对信件及时作出回复，但大部份都杳无音信，可能大部分人都经历过相同的事情。很多发出去的信件都得不到回复，即使部分报了价，但最终成交的可能性也微乎及微。即使是这样，也要对每份询盘做出及时回复以给客户留一个好印象。都说做业务员要有耐心，要有恒心，大概就是体现在这里吧。半年下来，虽然还未接到单子，但总体而言对外(内)贸流程也有了一定的了解。客户询盘——报价——得到订单，签订合同——公司内部下单投料——生产部生产设备——发货——调试——售后服务，每一个环节都至关重要。
当然半年下来也有令人担心的地方，就是公司整体制度比较混乱。我基本了解了公司的工作流程，也明白了公司的发展方向，这让我了解到工作并不是一个人的事，团结的力量是很大的。公司最主要的部门是销售部和生产部。这两个部门的协作是非常重要的，倘若这两个部门脱节了，就什么事也办不成了。我们知道只有销售部接到单子了，生产部才会有活做。而与此同时也只有生产部按时交出设备，才有可能带来下一次的合作。其实作为一家公司，首先经营的是人才，其次是诚信，然后就是产品。来到豪特的时间说长不长，说短也不短。但在这半年里，还是发生了很多事，楼下的钳工换了一批又一批，包括仓管、技术人员都换过，人员流动频繁，可能是员工们都缺乏一种归属感。还有就拿新产品鞋套机来说，自从上了这个产品后波折不断，如不能按时交货，客户来了多次却看不到能正常运行的设备。都说成交并非是销售工作的结束，而是下次销售活动的开始。但我们的现状却是接一个单子就失去一个客户。说到底原因在于诚信，我们知道诚信是公司经营的理念，与其说经营产品，倒不如说是经营诚信，每个公司都是靠着诚信保持着自己已有的客户群并扩大自身的影响力。还有就是产品质量也至关重要。出去的设备只有具备高质量，客户才会信赖我们，所以今后在产品质量方面一定要把好关。
在公司的这段时间我也特别感谢大家对我的照顾及帮助，当然要特别感谢的是主管。记得刚来时真的是很多东西都不懂。都说新人是需要人带的，我可能算是幸运的一个，因为有经验丰富的主管带着。记得刚开始什么都不懂，不懂得如何收发传真，不懂得如何在B2B上发布信息，不懂得如何对一些询盘函做出正确的回复。这段时间在主管的悉心指导下真的学会了很多，除此之外平常大家也会教我一些做人做事的道理，这些是在学校里是学不到。当然以后的路还很长，要学的还很多，我会继续向大家好好地学习。
外贸业务员年终总结三
伴随着新年钟声的临近，我们依依惜别了任务繁重、硕果累累的20xx年，满怀热情的迎来了光明灿烂、充满希望的20xx年。在这年终之际，现对来公司九个月的时间里所作的工作汇报如下：
一.完成了100P圆筒、100P彩虹、60P共91个集装箱的出口到美国，14个托盘的100P彩虹出口到日本，10个托盘的60P和100彩虹到中国台湾，及2400套圆筒和600套60P(REPLACEMENT)到美国。
主要负责
1.签订合同后，催客户开信用证，并与收到后审核，有问题并通知及时修改。
2.按制定的出货计划及相关要求与货贷联系租船订舱。
3.与客户确认相关得出货资料后，整理单据，办理木托熏蒸。并准备熏蒸证书。
4.协调好生产部门，按客户不同的包装要求，安排拖车发货。
5.核算出相关的出口数据，制作单据，委托办理出口报关。
6.根据信用证要求，制作并准备相应的出口单据，去银行办理交单议付，有时办押汇。
7.登记相关的出口资料，并按客户要求，每周提供装箱图片、箱封号、船名航次等资料。
8.将资料整理归档，并随时与银行核对每笔货款得到帐情况。并将每月的出口资料提供给财务。
此项工作繁琐且重复率高(自七月份起，几乎每周重复一次)，占去了近80%的精力。期间因工作时间短，经验不足，也犯过不少错误：
1.拖车订晚了，害同事及工人加班装集装箱。
2.与车间及其他部门配合、协调不够好。打件时缠绕膜的包装方式出现错误，检查工作没做好。
3.车间加班不及时，常被叔叔点名。
通过这段时间的努力，使我个人的耐心、细心程度及对工作的合理安排得到了锻炼，学会了在繁忙之中找条理，危难之中找希望。
二.与客户进行日常的邮件联系。
主要负责与韩国BEST SELECTION 公司联系关于此出口美国货物的细节内容，一般通过邮件来回确认。包括三种货物的包装、结算、出货期、产品质量、木托干湿度、法兰克福展位、新样品及相关产品的变动等等内容，其中大部分是协助王总来完成。
期间曾因业务经验少有过失误：在事情紧急、误解了韩国意思的情况下，与美国客户直接联系。结果给客户造成误解，给王总带来麻烦。
通过这项工作，使我原本欠缺的英语写作及口语得到了很大的提高，并学到了好多与客户交流的技巧及业务上的知识。但离一个成功国际贸易业务员的标准还差得很远，在今后工作中，定会多多注意，加以改善。
三.新产品的开发，为客户备样。
将王总与客户的谈判结果(有时旁听并记录)及产品要求、变化等内容传达给采购及生产部门，并负责监督并随时向领导汇报工作进度。按双方协商及客户要求，准备样品并负责发到美国或韩国。按不同要求，为客户提供图片、报价等，通过邮件反复确认。协助销售为B.S. 整理库存样品并报价;给B.S.准备从日本带回的新样品; 给 MORRIS 准备美国展会样品并报价等。
通过对此业务的接触，使我对公司的产品有了更好地了解，但距离还差得很远。这对于业务员来讲是一大缺陷，希望公司以后有时间能定期为新员工组织学习和培训，以便于工作起来更顺手。
四.与韩国HAN KOOK SHARP订遥控铅芯;催GOODFELA 生产并尽快发货;订EMICRO的细太空，并与收到货后，对于出现的质量问题进行邮件联系。由于出口美国货物的任务加重，后来都转给小毕负责。
五.处理日常工作，服从公司领导安排。
联系法兰克福展位的装修及邀请函的办理;为领导办理迁证准备资料;与车队、熏蒸、货贷、报关行、快递等搞好关系并与之定期结算费用;服从领导日常安排的各项工作;协助行政部制定部门职责;联系复印机维修，电脑维护等等日常工作。
总体说来，对于领导交给的各项任务都已比较顺利、较好的完成了。
展望邻近的20xx年，我会更加努力、认真负责的去对待每一个业务，也力争赢的机会去寻求更多的客户，争取更多的订单，完善进出口部门的工作。相信自己会完成新的任务，能迎接新的挑战。
篇6：进口合同范本_合同范本
进口合同范本
下面是由应届毕业生合同范本介绍的一份进口合同
买 方：____________ 地址：________________ 电话：____________
法定代表人：____________ 职务：________________ 国籍：____________
卖 方：____________ 地址：________________ 电话：____________
法定代表人：____________ 职务：________________ 国籍：____________
买卖双方在平等、互利原则上，经充分协商一致，由买方购进，卖方出售下列货物，并按下列条款履行：
第一条 货物名称、规格、生产国别、制造工厂、包装及唛头。
每件货物上用不褪色的涂料标明货号、毛重、净重、编号、尺码、目的口岸，并标明下列唛头
第二条 数量、单价、总值。
第三条 装运期限：
每月交货数量必须一次交清，不得分批装运。
第四条 装运口岸：
第五条 目的口岸：
第六条 付款条件：买方在收到卖方关于预计装船日期及准备装船的数量的通知后，应于装运前20天通过________银行开立以卖方为受益人的不可撤消的信用证。该信用证凭即期汇款票及本合同规定的单据在开证行付款。
第七条 单据：各项单据均须使用与本合同相一致的文字，以便买方审核查对：
A.填写通知目的口岸对外贸易运输公司的空白抬头、空白背书的全套已装船的清洁提单(如本合同为FOB价格条件时，提单应注明“运费到付”或“运费按租船合同办理”字样;如本合同为CFR价格条件时，提单应注明“运费已付”字样)。
B发票：注明合同号、唛头、载货船名及信用证号;如果分批装运，须注明分批号。
C.装箱单及/或重量单：注明合同号及唛头，并逐件列明毛重、净重和货号。
D.制造工厂的品质及数量/重量证明书。
品质证明书内应列入根据合同规定的标准按货号进行化学成分、机械性能及其他各种试验的实际试验结果。数量/重量证明书应按货号列明重量。
单证
份数
寄送 A
B
C
D
E
F
送交方议付银行 3
4
3
3
1
1
送交议付银行(副本)
1
空邮目的岸外运公司(副本)
2
2
2
2
E.按本合同规定的装运通知电报抄本。
F.按本合同规定的航行证明书(如本合同为CFR价格条件时，需要此项证明书;如本合同为FOB价格条件时，则不需此项证明书)。
第八条 装运条件：
A.离岸价条款：
(a)装运本合同货物的船只，由买方或卖方运输代理人________租船公司租订舱位。卖方负担货物的一切费用风险到货装到船面为止。
(b)卖方必须在合同规定的交货期限30天前，将合同号码、货物名称、数量、装运口岸及预计货物运达装运口岸日期，以电报通知买方以便买方安排舱位。并同时通知买方在装货港的船舶代理，若在规定期限内买方未接到前述通知，即作为卖方同意在合同规定期内任何日期交货，并由买方主动租订舱位。
(c)买方应在船只受载期12天前将船名、预计受载日期、装载数量、合同号码、船舶代理人，以电报通知卖方，卖方应联系船舶代理人配合，按期备货装船。如买方因故需要变更船只或更改船期时，买方或船舶代理人应及时通知卖方。
(d)买方所租船只按期到达装运口岸后，如卖方不能按时备货装船，买方因而遭受的一切损失包括空舱费、延期费及/或罚款等由卖方负担。如船只不能于船舶代理人所确定的受载期内到达，在港口免费堆存期满后第16天起发生的仓库租费、保险费由买方负担，但卖方仍负有载货船只到达装运口岸后立即将货物装船之义务并负担费用及风险，前述各种损失均凭原始单据核实支付。
B.成本加运费价条款：
卖方负责将合同所列货物由装运口岸装班轮到达目的口岸，中途不得转船。货物不得用悬挂买方不能接受的国家的旗帜的船只装运。载货船只在驶抵本合同规定的口岸前不得停靠________或________附近地区。
第九条 装运通知：卖方在货物装船后，立即将合同号、品名、件数、毛重、发票金额、载货船名及装船日期以电报通知买方。
第十条 保险：自装船起由买方自理，但卖方应按本合同规定通知买方。如卖方未能按此办理，买方因而遭受的一切损失全由卖方负担。
第十一条 检验和索赔：货卸目的口岸，买方有权申请____ 国商品检验局进行检验。如发现货物的品质及/或数量/重量与合同或发票不符，除属于保险公司及/或船公司的责任外，买方有权在货卸目的口岸后90天内，根据____ 商品检验局出具的证明书向卖方提出索赔，因索赔所发生的一切费用(包括检验费用)均由卖方负担。FOB价格条件时，买方有权同时索赔短重部分的运费。
第十二条 不可抗力：由于人力不可抗拒事故，使卖方不能在合同规定期限内交货或者不能交货，卖方不负责任。但卖方必须立即以电报通知买方，并以挂号函向买方提出有关政府机关或者商会所出具的证明，以证明事故的存在。由于人力不可抗拒事故致使交货延期一个月以上时，买方有权撤消合同，卖方不能取得出口许可证，不得作为不可抗力。
第十三条 延期交货及罚款：除不可抗拒原因外，如卖方不能如期交货，买方有权撤销该部分的合同，或经买方同意在卖方缴纳罚款的条件下延期交货。买方可同意给予卖方15天的优惠期。罚款率为每10天按货款总额的1%。不足10天者按10天计算。罚款自第16天起计算，最多不超过延期货款总额的5%。
第十四条 仲裁：一切因执行本合同或与本合同有关的争执，应由双方通过友好方式协商解决。如经协商不能得到解决时，应提交中国国际经济贸易仲裁委员会，按照该仲裁委员会仲裁程序进行仲裁。仲裁委员会的裁决为终局裁决。对双方均有约束力，仲裁费用除仲裁委员会另有决定外，由败诉一方负担。
第十五条 本合同于____年____月____日于____国____市用____文签署，正本一式两份，买卖双方各持一份。
买 方：________ (盖章)
代表人：________
卖 方：________ (盖章)
篇7：海运空运出口运输代理服务协议书
甲方：
地址：
电话：
传真：
联系人：
乙方：
地址：
电话：传真：
联系人：
甲、乙双方经友好协商，本着平等互利的原则就货物出口运输代理服务达成如下委托协议：
一、服务内容
乙方委托甲方将货物自国内口岸出口运往世界各地港口，业务范围包括：出口舱位洽订，代办仓储报关，代办陆路集装箱运输，签发提单及其他相关业务。
二、服务要求
甲方接受委托后，依照乙方具体要求(以乙方书面/电子托运单为准)及时快捷、稳妥将货物运抵乙方指定的目的港。
三、费用结算与付款
海运费及其他有关费用根据订舱委托书上(托运单)约定的价格或者其他书面资料来计算，如果在办理货物出口运输过程中发生额外的费用，应该由乙方承担，具体金额以甲方开具的额外费用通知单为准。
据实际发生的费用情况，双方约定按次、按期结算费用：包括运费、附加费、代垫费用以及额外费用。
双方确认费用后乙方需按约定的时间将费用汇至甲方指定之银行账户，甲方为乙方开具税务发票
四、违约责任
甲方必须按乙方的委托要求代理货物出口业务，在办理委托运输过程中产生任何意外情况需及时通知乙方，乙方必须按约定的付款方式与期限支付费用，否则甲方有权扣押货物及提单直至收妥费用为止。
五、合同期限
本合同自签订之日起一年内有效，合同期满后双方无异议，则续约，否则合同终止。
六、其他约定
本合同一式两份，甲乙双方各执一份，自签订之日起生效，未尽事宜，双方本着真诚合作的精神，通过友好协商解决。
甲方：乙方：
签订日期:签订日期:
篇8：货物进口合同样式二_合同范本
合同编号：＿＿＿＿＿
甲方：＿＿＿＿＿公司（以下简称供方），由＿＿＿＿＿代表。
乙方：＿＿＿＿＿公司（以下简称购方），由＿＿＿＿＿代表。
目录
第一条 合同标的
第二条 技术资料
第三条 供货条件－－包装和标记
第四条 设备质量
第五条 合同价格和支付条件
第六条 保证
第七条 不可抗力
第八条 仲裁
第九条 通知
第十条 语言
第十一条 其他条件
附件1
设备技术说明书
甲方＿＿＿（供方）与乙方＿＿＿＿（购方）达成如下协议：
第一条 合同标的
供方同意出售，购方同意购买＿＿＿＿。（详见本合同附件1，该附件为本合同不可分割的一部分）。
第二条 技术资料
供方应向购方提供设备使用及维修技术资料一份，购方负有对该技术资料保密之义务。
第三条 供货条件－－包装和标记
供方应在设备全额信用证开立之后的＿＿个月内用密封集装箱或其他包皮包装从＿＿＿＿发运设备。
供方有权从任何对其方便的港口发运设备。
供方应把设备运至商定的独联体东海岸＿＿＿港。
自设备从船舷运抵独联体远东港口时起灭失和（或）损坏的风险由供方转移到购方。
供方承担设备运输的一切费用及运抵港口前的保险费。
设备从独联体港口继续运到安装地的一切费用由购方承担。
发货前＿＿天内供方应向购方通知发运情况，明确交通工具的种类和名称、计划发运日期及其他有关信息。
购方应支付履行海关手续的所有费用和一切与设备运入独联体境内有关的开支。
设备和技术资料用密封集装箱或其他包皮装运并附具包装清单，标记使用英语刷写。
发货单证包：
（1）发货帐单（三份）
（2）海运提单
（3）装箱单
（4）保险单
第四条 设备质量
按本合同所供设备的质量应符合生产厂家的技术条件。如生产厂家有保证书，应用保证书加以确认。
第五条 合同价格和支付条件
所供设备的总额为＿＿＿美元（cif价）。购方应在合同签订后的＿＿天内开立以供方为受益人的不可撤销的保兑信用证。该信用证在开立时起的＿＿天内有效。
开证行应为独联体外经银行或日本、南韩、西欧、美国、加拿大的某家银行。
一切与在开证行开立信用证有关的费用由购方承担，而一切与议付行收取信用证有关的费用由供方承担。
支付在向议付行提交下列单据后进行：
（1）发货帐单（3份）
（2）海运提单
（3）装箱单
（4）保险单
第六条 保证
供方保证所供设备在投入使用日起的＿＿个月内，但不超过发货日起的＿＿月内正常工作。
第七条 不可抗力
在发生不可抗力情况致使合同一方不能全部或部分履行本合同的义务时，按此种不可抗力情况存在的时间推迟履行合同义务。
不可抗力情况是指双方不能预见或预测的由于非常事件而出现的情况，即：影响履行所承担义务的火灾、风暴、地震和其他自然现象，以及战争、任何性质的军事行动，各国政府的封锁与制裁等。
因不可抗力情况而不能履行义务的一方，应在不可抗力情况发生和停止的20天内书面通知另一方关于其发生和停止的情况。收信人所在国邮局在收到通知函日加盖的日期作为得悉该信息的日期。
共2页，当前第1页12
篇9：对外贸易代理合同
代理方（以下简称甲方）：
联系方式：
地址：
委托方（以下简称乙方）：
联系方式：
地址：
为了发挥各自优势，共同做好出口工作，本着“诚实、信用”的原则，甲、乙双方经过友好协商达成协议如下：
一、合作形式
1、乙方以其拥有的出口客户和渠道与甲方进行出口业务合作，乙方承诺其拥有的出口客户和渠道没有侵犯第三者的权益，进行的出口业务内容合法，无欺诈等行为，否则乙方承担最终的全部法律责任。
2、合作期间，乙方作为甲方的业务办事处或业务部对外从事出口业务并承担规定的义务。
3、合作期间，乙方以甲方名义从事出口业务必须遵循本协议的有关规定。
4、合作期间，甲方应对乙方的客户资料进行必要的保密，不得利用乙方的客户资源开展与乙方业务相关的业务。
5、甲方负责报关、报验、制单结汇等工作。
二、出口指标和相关考核
1、期限：_______年_______月至_______年_______月。
2、乙方承诺完成年出口任务_______万美元。甲方按出口金额每美元收取代理费_______元人民币；或按等值的代理费进行买断，买断比例为1美元：______人民币，采取买断式，乙方必须提供足额的增值税发票和专用缴款书。
三、基本规定
1、甲方的权利和义务
（1）按照甲方的标准合同格式负责对外出口合同的签订。
（2）按照甲方标准合同格式与有关的供货单位签订代理出口合同。
（3）负责报关、报验、投保、结汇以及有关文件的申领（应由乙方提供的文件除外）等工作，要求及时、准确。
（4）按照本协议的有关规定及时向乙方分配其应得的利润。
2、乙方的权利和义务
（1）按照本协议业务操作的有关规定负责对外的磋商。
（2）按照出口合同的有关规定负责出口货物的质量监督和把关工作，督促有关供货单位按时、按质交货并对有关供货方的质量承担担保连带责任。
（3）及时向甲方提供与出口业务有关的文件或单据。
（4）负责出口货物的安全收汇并对延迟收汇和不能收汇以及不能按时收汇核销承担全部的责任。
（5）乙方应负责出口收汇核销单和出口退税文件的按时收回和交接工作。
（6）乙方应负责逾期账款的催收工作并承担国外客户的理赔工作。
（7）按照本协议的有关规定及时从甲方得到应分配的利润。
3、业务操作的具体规定
（1）由乙方具体负责出口业务的磋商和成交工作，对外签订出口合同须以甲方名义并使用甲方的标准出口合同格式。
（2）出口合同的卖方或信用证的受益人是：________________________公司。
（4）合作期间，甲方先行预付部分资金或垫付费用及预先垫付的退税等应按实收取财务利息,?预先垫付的退税利息按照财务利息/月息_________?_______个月收取。
（5）甲方应认真制作有关的出运、报关、报验和结汇单据，做到“准确、完整、无误”；同时，应积极协作乙方及时申领和寄送有关文件。
（6）货物须担保出运或单据须担保结汇，乙方须及时和客户联系并向甲方提供客户同意货物担保出运或接受单据不符并担保付款的书面文件。
（7）合作期间，在货物按期、按质出运的情况下甲方应按照代理合同约定的付款时间及时与有关供货单位进行结算。
货款的结算时间如下：收到国外货款日后_____个工作日内（节假日例外）；货款结算必须符合下列条件：
①?货物必须已经出运。
②?货款结算的基本文件必须齐全，货款结算的基本文件包括：出口发票、增值税发票、专用缴款书、提单副本。
③?有关票据内容必须真实、有效（包括票据表面完整）。
④?结算的数量、金额必须与出运的货物完全一致。
⑤?在代理出口或T/T付款条件下，货款必须已经收汇。
货款的支付：增值税发票、专用缴款书须符合开票资料的要求，有关开票资料将另行通知；如因业务需要，应开具发票企业的要求，须将货款付给其他企业的，必须有开具发票的企业填写代付委托书，并加盖企业公章；货款支付时，如受款单位与甲方存在欠款的，应按实扣回。
（8）每笔出口贸易如有客户佣金部分，应在收到全部货款后及时支付给客户。
（9）乙方应承担有关业务项下产生的费用如：结汇费用、国外运费、_____费、内陆费用、核销费、邮电费用、集港费用、银行利息等。
4、利益结算与分配：乙方的利润和甲方代理费每笔结清并在该笔业务完全操作完成后（如安全结汇、费用清楚、单证票据齐全、退税核销文件按期退回等）_____天进行分配；利润分配时如乙方以前的业务中存在逾期账款、库存或存在其他损失，应按实计入费用并在利润分配时从其利润中扣减；利润分配时乙方应提供必要的合法有效的票据。
四、违约责任
1、未经甲方同意，如乙方违约跨区代理销售，一经确认，首先罚违约金人民币______万元，然后再将实际损失的额赔偿给甲方。
2、自乙方代理资格生效之日至代理资格失效之日内，甲方不得再到乙方代理区域内进行销售，如有违反，首先罚违约金人民币___万元，然后再将实际损失数额赔偿给乙方。
五、争议的解决
如在协议期内如发生分歧，应先友好协商，协商不成可诉至_____人民法院解决。
六、附则
1、在甲方未设立产品总代理地区，为扩大销售量，乙方书面申请经甲方同意后，可向该地区销售代理产品。
2、在合同签订后，合同可到公证处公证，公证费由提出方承担。
3、签订本协议时，乙双方应提供企业营业执照，法人身份证明及法人授权委证书，企业有关资质证明。
4、未尽事宜，双方可另行商议。本协议一式贰份，甲、乙双方各执一份，具同等法律效力，双方签字盖章后可生效。
甲方（签章）：
签订日期：______年______月______日
签约地点：
乙方（签章）：
签订日期：______年______月______日
签约地点：
篇10：农产品质量安全工作总结
农产品质量安全关系到人民群众的身体健康和生命安全，关系到经济发展和社会稳定，是人民群众最关心、最直接、最现实的利益问题。今年以来，在上级主管部门的指导和县委县政府的正确领导下，我局坚决贯彻落实党中央和省州有关农产品质量安全的各项政策，同时加大农产品质量安全监管的工作力度，狠抓农产品质量安全责任制的落实，强化日常监督管理。这一年，经过上下各方的共同努力，各项工作有序开展、进展顺利，取得了一定成效。
一、高度重视，加强领导
20xx年，我局对农产品质量安全工作高度重视，多次召开农产品质量安全会议，研究部署农产品质量安全监管工作，明确职责，把农产品质量安全监管责任落到实处，加大对农产品质量安全的检测力度，严抓农资市场的监管，认真做好本县农产品质量安全宣传与教育培训工作，确保在源头、生产环节和市场等方面做好农产品质量安全整顿工作。
二、具体工作开展情况
一是加大宣传力度，通过宣传车、横幅标语、印发资料等方式，在全县全方位地进行农产品质量安全宣传，教育全县生产经营者、流通者及消费者要进一步认识明确农产品质量安全的重要性和必要性，大家同心协力抓好菜篮子，建好菜园子，管好菜摊子。二是县农业局以农业技术推广工作为中心，结合农技、植保、科教、经作等各业务站组成培训队伍赴各个乡镇对农民进行农药安全使用知识培训，县农业局印发了限禁用农药清单，分发给广大菜农果农，教育他们要增强农产品质量安全意识和责任，自觉加强农产品质量管理，确保生产放心果菜。三是对农资经营商进行规范经营农药知识培训，要求农药经营者要严格按照有关规定经营农药尤其是限用农药，对农民负责，对社会负责。
(一)农产品质量安全方面
1、加强法律、法规宣传，开展农药专项整治，加强农产品生产的投入品管理，确保农产品安全生产，共计发放宣传资料20xx份，出动车辆26台次、执法人员318人次分别对全县64家农药经营户进行了抽查。
2、做好农产品生产田间指导，要求农户在生产过程中严禁使用国家明令禁止的高毒高残留农药，严格农药使用安全剂量、严格安全周期，保证农产品安全进入市场。
3、对全县取得农业部“三品一标”证书的农民专业合作社及企业加强管理，引导督促农民专业合作社依法建立农产品质量安全生产档案，鼓励生产经营散户自觉建立生产档案。
4、对甘洛县三个大型水果蔬菜农贸市场及新市坝镇、田坝镇、两河乡、坪坝乡、海棠镇等季节性大量上市的蔬菜、水果等进行抽检，全年抽检样品14批次，共计检测样品223个(其中基地检测抽样27个，市场抽检样品195个，无公害产品抽样1个)，检测合格率为100%。
5、为加强我县农产品质量安全工作，保障广大消费者食用农产品安全，20xx年启动实施了农产品质量安全检验检测体系建设工程，20xx年中央预算内投资300万元(其中中央投资240万元，地方配套60万元)用于项目建设，包括636平方米实验室改扩建和87台套仪器采购。目前实验室改扩建基建工程已基本完工，待验收。
(二)农资市场监管方面
1、在大春生产期间由县农业局牵头，联合县工商局、县物价局、县公安局、县质检局四家单位对县城内的农资市场进行了为期18天的联合执法大检查，大清理。以种子、农药、肥料等三类农资为重点，集中治理存在的突出问题，取缔无证无照经营单位，查处违反《种子法》规定的不法种子，共检查农药经营户64户次、种子经营户70户次，发放农产品质量安全法律法规等宣传资料20xx份，保证农资市场的安全。
2、我局积极组织农业执法队伍开展农资打假和监管工作。今年以来，累计下乡执法人员156人次，检查农资经营门市80多个，抽检农药标签70个，发放种子、农药宣传资料1000余份。执法宣传车在县城区和各乡镇开展种子、农药安全宣传活动。
三、存在的问题
(一)农产品质量安全方面的问题
1、源头监管和生产过程控制难度大
农产品质量安全管理尚处在起步阶段，生产者质量安全意识还较薄弱，在生产环节，农产品生产经营单位大多为分散式的单位和个体，规模化程度还较低，农业生产者质量安
全意识不强，由于长期受传统生产观念的影响，生产者缺少社会监督和自我约束限制，科学施肥、用药及标准化生产规程很难在生产上完全实施。
2、检测机构基础薄弱
农业部门检测检验机构由于起步较晚，基础薄弱，与农业大市的地位不相符合，不能满足农产品生产全程质量安全监管和全面提升农产品质量安全水平的需要。
(二)农资市场方面的问题
1、农资经营环节不规范，虽经多次农资打假整顿，一些不法商贩和生产者仍然违规使用禁药，这种分散农资经营体制问题给农产品质量安全源头治理以及生产过程控制带来极大的困难。同时，农药、种子、兽药等生产资料的标签不规范，商品名多、杂、乱，包装简陋，也很难分辨出其主要成分和用途，农民无所适从，很难为农产品质量安全追溯和责任追究提供依据。
2、执法队是农业部门非常重要的农业执法工作单位，随着农业监督执法工作的不断深入和细化，执法人员进行执法检查的频率越来越高，但都是着便装开展工作，显得随便、管理混乱，不够整洁、整齐，而且缺乏取证设备，最大的尴尬是便装执法有时不被行政相对人认可，没有制服、没有工号，管理相对人很难感受到按章办事的严肃性，在一定程度上影响了执法工作的开展。
今年，通过农产品质量安全的宣传、教育、监督、检查等一系列活动，广大人民群众的农产品质量安全意识有了进一步的提高，一大批隐患得到了有效的整治，确保了今年无农产品生产安全事故的发生。然而，我们也清醒地看到，我县的农产品质量安全工作还存在着相当多的薄弱环节，人民群众的农产品质量安全意识有待进一步提高，这些都有待于我们在今后的工作中进一步努力，共同去解决。
总之，保障农产品安全，是一项长期的保证民生健康的基础性工作。同时，又是以农业部门为主，其它有关部门协调配合，全民参与的安全行动，需要上下同心，齐抓共管，合力推动。只有人人重视农产品安全，人人监督农产品安全，人人做到农产品安全，不安全的因素也就没有了生存的土壤和温床。
篇11：操作工工作总结
化工操作工年终总结在工厂当车间组长已经不短的时间了，在这段时间了，我学到了很多。有如何管理车间员工，处理好与员工的关系以及和上级的关系，如何激励员工加大生产，提高他们的积极性，这是我学到最大的感受了。
一年也要过去了，在年终的时候写出自己的心理感受和总结，用来给明年我以激励和鼓舞，我相信我能够做到最好。
一、对设备进行技术改造。
1、分别对一、二、三、六车间的部分设备根据实际情况进行了改造，降低了工人劳动强度，提高了产品质量，节约了生产成本。
2、通过公司组织处出学习，对生产工艺进行改进，将新的生产工艺配方成功应用于生产，降低了生产成本。
二、班组的建设与管理得到加强。
1、充分利用例会和车间班前班后会，将公司第二次创业的精神认真传达，使车间员工真正领会到公司的发展要求、前景和目标，筑建员工以厂为家的思想。
2、加强了班组培训学习。车间班组长的责任直接影响车间的工作质量，因此，在XX年的班组建设中重点加强了班组长的培训与学习，使他们真正发挥技术骨干和模范带头作用。
三、现场管理得到改善。
1、制定了现场管理制度，并在生产过程中认真执行，宣传贯彻“5s”活动，并认真组织实施，使现场管理得到大的改善。
2、将东厂所有积压余料进行消化，避免了原材物料的浪费，节约了生产成本，改善了现常
四、生产、技术管理得到加强。积极配合质量管理部门对车间质量的检查力度，并强化生产技术的管理力度，使产品质量一次抽检合格率大大提高，水分超标现象减少，产品板结现象得到较好控制。
五、狠抓安全管理不放松。
1、加强了对班组安全检查力度，完善了岗位责任制，发现问题及时通报并限期整改，使安全隐患大大降低，确保了XX年的安全生产。
2、充分利用周二安全例会时间，认真分析一周来的安全生产情况，将车间发生的安全事故认真分析总结，吸取经验，杜绝类似事故的再次发生。
20xx年虽然取得了一定的成绩，但仍存在着很多问题和不足，主要表现如下方面：
一、安全方面：安全管理有好多没有到位，这主要表现在以下几点：
1、安全管理力度不够。安全作制度不健全，安全培训不到位，检查不到位，有好多时候，由于我们的工作当中劳动量比较大，工人的体力消耗比较大，为此在生产安全检查过程中，发现的安全隐患没有严肃的指出或者没有按照安全管理制度进行处罚，现在想来是完全不对的，在安全事故没有发生以前，就应该不讲情面，只有这样，才能彻底消灭安全隐患。为此，我想在今后的工作中，对存在人情面子的安全隐患没有指出或处理的，我们将严肃处罚当班安全责任人。
2、安全标志仍不够健全。到目前为止，东西两个厂子，我自己简单的找了找，发现像高空作业、高温作业、高压作业安全标志没有设立，准备限期解决。
3、安全隐患整改及时不彻底。由于存在侥幸心理，有些安全隐患的整改工作存在应付现象，并且还认为这样会降低一些生产成本，这样在有些安全隐患的整改中没有彻底整改，我想在今后的工作中，不论要付出多少，只要是安全隐患，只要是不符合安全管理规定的，就要坚决不折不扣的进行整改，并安排整改责任人限期整改。对整改不彻底的，严肃处理整改责任人。
4、违章操作的几乎没有处理过。在工作过程中，有好多操作没有严格按照操作规程操作，但是当时又没有发生安全事故，所以大多只是口头批评，而没有严肃处理。现在想来，这是安全隐患的重中之重。象前段时间一名操作工违章操作，作业完成后，直接从2米高的地方跳下，造成足跟撕裂。因此在今后的工作中，凡是出现的任何违章操作的，一律停工休息。
二、生产、成本方面：因简单追求产量，使有时个别班组为了当班的自身的利益，出现了：
1、技术岗位的培训欠缺。现在看来技术岗位的培训确实太少了，如果能经常进行技术岗位的培训，使同一工种的技术人员的技术水平都在不断的提高，那么我们的产量一定会提高，产品的生产成本就一定会下降。我们已经采取了一项措施就是定期召开技术研讨会，要求大家在会上畅所欲言，把自己在生产过程中发现的问题和方法都说出来，是问题的，大家讨论解决，是经验的，大家共同吸龋我想还要让他们这些技术人员从文化方面、技术方面从外面吸取更新的知识，来进一步提高技术人员的思想素质和技术水平。
2、管理不到位，有跑冒漏现象，成本考核制度不健全，落实责任不到位。加大管理力度，建立成本考核制度，量化考核。
3、交接班不协调。比如个别班组以清理现尝准备交接为由，采取应付投料的方法，造成下个班次的产量降低。这一点对我作为管理者来说确实是个头痛的事，目前解决的办法就是首先尽可能的提高班组长的思想素质，并要求他们要考虑整体利益，其次就是硬性规定处理现场的时间，以保证交-班工作的正常进行。对于发现有明显故意应付投料的班组，严厉处罚班组长，或者扣减当班的产量。
4、设备带病工作。个别班组在生产过程中，为了尽可能的提高产量，在设备出现故障隐患时，没有及时进行修理，结果既缩短了设备使用寿命，又加大了设备维修资金的投入，把设备的维修时间转移到了下一个班次，并延长了维修时间。凡是已经发现设备有简单的小故障应该停车检修而没有停车的，加大处罚班组长和维修工的力度，同时我们在今后的工作中要进一步建立完善的管理制度，我在想能不能把技术工(维修工)分出几个档次，这可以通过考核或者评审的办法进行分档，这样如果发现维修工人不处理当班设备故障的，进行降低技术工档次的处罚。
虽然我们车间问题不小，可是我相信，只要我们只要安全生产，不会出现任何问题的。现在全球金融危机的情况下，大量制造业企业倒闭，关门，我们厂也面临着如此的困境，所以我们更要加强生产，提高效率，使我们厂在金融危机的影响下做到最小，我相信我们能够度过难关的。
篇12：农产品售卖合同书
买受人(甲方)：签订地点：
卖出人(乙方)：签订时间：
为适应农业产业结构调整，促进农业和农村经济的发展，提高农民和企业的经济效益，发展“订单农业”，根据《中华人民共和国民法典》，经甲、乙双方协商一致，订立本合同，以便共同遵守。
第一条订单标的(品种、等级、质量)序号产品名称品种等级质量要
第二条标的交售日期、数量及价格
1、出卖人在年月以前(或月旬内)，向买受人交售公斤。
2、所售农产品最低价格(保护价)元/公斤，市场行情上涨超过%时，由收购单位按市场价格进行收购。
3、买、卖双方的任何一方如需提前或延期交货与提货，均应事先通知对方，双方另行达成新的协议。
第三条产品包装农产品的包装，由买卖双方协商包装办法。
第四条交货方式、验收、结算方式
1、实行送货到收购点，货物由买受人当面验收。
2、货款由买受人支付给出卖人，现金结算，钱货两清。不得打白条或代扣其他税费。
第五条违约责任
1、买受人在合同履行中退货的，应偿付出卖人退货部分货款总值(5～25%)的违约金。
2、买受人无故拒收农产品，应向出卖人偿付被拒收货物总值(5～25%)的违约金。
3、买受人未按合同规定收购农产品，应按少收部分的总值(5～30%)支付的违约金。
4、出卖人交货数量少于合同规定的，按少交数量价值(5～25%)违约金。
5、出卖人在交售农产品掺杂使假，以次充好，买受人有权拒收，出卖人同时承担(5～25%)违约金。
6、出卖人包装不符合规定的，买受人有权要求出卖人重新包装，损失由出卖人承担。
第六条不可抗力1、买、卖双方的任何一方由于不可抗力的原因不能履行或不能完全履行合同时，应尽快向双方通报理由，在提供相应证明后，可根据情况部分或全部免予承担违约责任，出卖人如果由于不可抗力造成产品质量不符合同规定的，不承担违约责任。
2、农产品因受气候影响早熟或晚熟的交货期经双方协商，可适当提前或推迟。
第七条合同的变更与解除
、执行议定价格时，遇国家政策进行重大调整，其调价幅度高于或者低于议定价格的15%，甲、乙双方中的任何一方可以请求变更合同或解除合同。
2、买、卖双方的任何一方，请求变更或解除合同时，应及时书面通知对方，未达成协议前，原合同仍然有效。当事人一方收到另一方要求变更和解除合同建议后，应在十日内作出答复，逾期不答复视为拒绝。
3、合同期满，买、卖双方可根据对下一年供应的预测，重新签订合同。
第八条合同争议的解决方式本合同在履行过程中发生的争议，由双方当事人协商解决;也可由当地工商行政管理部门调解;协商或调解不成的，按下列第种方式解决：
(一)提交仲裁委员会仲裁;(二)依法向人民法院起诉。
第九条本合同生效。
第十条其他约定事项：
第十一条本合同一式三份，双方各执一份，交机关备案一份。
买受人(甲方)：负责人：住所：联系电话：
出卖人(乙方)：居民身份证号码：住所：
年月日
篇13：技术出口合同范本_合同范本
Contract for Equipment Sales and Technology Licensing
Contract No. ____________________
This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).
Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:
Article 1 Definitions
1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.
1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.
1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.
1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.
1.5 “Destination Airport” refers to _____________Airport.
1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.
1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.
1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.
1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.
1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.
1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.
1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.
1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.
1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.
1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.
1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.
1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.
1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.
1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.
Article 2 Scope of the Contract
2.1 The Seller’s Obligation
2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.
2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.
2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.
2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.
2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.
2.2 The Buyer’s Obligation
2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.
2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.
2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.
2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.
2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.
2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.
Article 3 Grant of License
3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.
3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.
3.4 Territory
3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.
3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.
Article 4 Price
4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.
4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).
The breakdown price is as follows:
The price for Equipment is __________(say _______________________ only).
Fee for design is __________(say _______________________ only).
Fee for Technical Documentations is __________(say _______________________ only).
License fee is __________________(Say: _________________ only)
4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).
4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.
4.2.3 The above price is fixed and firm.
4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.
4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.
Article 5 Payment
5.1 Down Payment
Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.
5.2 [Option One: Payment by Sight L/C]
The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).
5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) Bill of Lading in one (1) original and ___ ( ) copies;
(b) Commercial Invoice in one (1) original and ___ ( ) copies;
(c) Packing list in one (1) original and ___ ( ) copies;
(d) Certificate of Origin in one (1) original and ___ ( ) copies;
(e) Insurance Policy in one (1) original and ___ ( ) copies;
5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;
(b)One ( 1 ) copy of commercial invoice.
5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;
b) One (1) copy of Commercial Invoice.
5.2 [Option Two: Payment under a L/G]
The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.
5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.
Article 6 Delivery of Equipment and Technical Documentation
6.1 The Delivery of the Equipment
6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.
6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.
Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.
6.1.3 The port of shipment is ____, while the port of destination is ____.
6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.
6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.
6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:
(a) Contract number
(b) Name of the vessel and loading port
(c) Name of the Equipment shipped
(d) Number and date of Bill of Lading
(e) Total volume
(f) Total gross and net weight
(g) Total number of packages/cases
6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:
(a) Bill of Lading
(b) Commercial Invoice
(c) Packing List
(d) Certificate of Origin
(e) Insurance Policy.
6.2 The Late Delivery of the Equipment
6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:
(a) From the first week to the fourth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per
week
(b) From the fifth week to the eighth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per week
(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of
the value of the delayed portion of the Equipment per week
6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.
6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.
6.3 The Delivery of the Technical Documentation
6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.
6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.
6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.
6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.
Article 7 Packing and Marking
7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.
7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:
(a) Destination
(b) Consignee
(c) Contract number
(d) Shipping mark
(e) Gross/net weight (kg)
(f) Case/ bale number
(g) Dimensions: L x W x H (cm)
7.3 Each package shall contain one (1) copy of packing list.
7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.
7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.
(a) Destination
(b) Consignee
(c) Contract number
(d) Gross/net weight (kg)
(e) Item number
(f) Dimensions: L x W x H (cm)
Article 8 Technical Service and Technical Training
8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.
8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.
8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.
8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.
Article 9 Standards and Inspection
9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.
9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.
9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.
The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.
9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.
In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.
9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.
9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.
If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.
Article 10 Design and Design Liaison
10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.
10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.
10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.
Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance
11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.
11.2 Chief Representatives
11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.
11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.
11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.
11.3 Erection and Test Run
11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.
11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.
11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.
11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.
11.4 Commissioning and Performance Test
11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.
If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.
11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.
11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.
11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.
11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.
11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.
11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.
11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.
11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.
The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.
11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.
11.5 Acceptance
11.5.1 Acceptance shall occur in respect of the Equipment when :
(a) Performance Test has been successfully completed as per the Article 11.4.6.; or
(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or
(c) The Seller has paid the liquidated damages as per Article 11.4.9; or
(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or
(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.
11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.
11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.
11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.
11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.
Article 12 Guarantee and Warranty
12.1 The Seller guarantees that:
(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;
(b) The Technical Documentation shall be complete, clear and correct.
12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.
12.3 Defect of the Equipment
12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.
The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.
12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.
12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.
12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.
12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.
12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:
(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or
(b) Alteration, modification or repair without the Seller’s prior written consent; or
(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or
(d) Normal wear and tear.
12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.
12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.
12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.
12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.
12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.
Article 13 Intellectual Property Right
13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.
13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.
13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.
13.4 Registration of the Contract and Maintenance of Patent
13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.
13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.
13.5 Improvement and Grant-back
13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.
13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.
13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.
Article 14 Confidentiality
14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.
14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.
14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.
14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.
14.5 This Article 14 shall survive the expiration or termination of the Contract.
14.6 The confidential obligation shall not apply to the information which:
A. now or hereafter enters the public domain; or
B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or
C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.
Article 15 Taxes and Duties
15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.
15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.
15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.
15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.
Article 16 Force Majeure
16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.
16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.
16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.
Article 17 Applicable Law and Settlement of Disputes
17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.
17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.
17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.
17.4 The arbitral award shall be final and binding upon both parties.
17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.
Article 18 Effectiveness, Term and Termination of the Contract
(a) The Seller and the Buyer sign the Contract;
(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);
(c) The Seller receives the Down Payment;
(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.
18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.
18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.
18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.
(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.
(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.
(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.
18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party
A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
B. fails to perform its confidentiality obligation under the Contract; or
C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.
18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if
A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or
B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or
C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.
18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,
The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.
All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.
All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.
In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.
The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.
E. Termination of the Contract shall not release either party from its confidential obligations under the Contract
Article 19 Miscellaneous
19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).
19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.
19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.
If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.
19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.
19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.
The Buyer:
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
The Seller :
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.
The Buyer:
The Seller:
By:______________________[Signature]
Name: [printed name]
By:_______________________ [Signature]
Name: [printed name]
Title:
Title:
Appendices
Appendix 1 Specifications and Guarantee Indices (Omitted)
篇14：技术转让和设备、材料进口合同_合同范本
中国产品进出口公司和上海产品生产厂（以下简称中方）与英国广播有限公司（以下简投资人）和德国贸易有限公司（以下简称apl）签订本合同，其条款如下：
第一条 技术转让
（1）中方为在上海生产投资人的甲型和乙型产品而引进必需的技术。这些产品以下简称为产品。
（2）投资人应中方要求按本合同提供其拥有的制造产品所需的技术和资料。
（3）产品的名称规格详见附件一。
（4）投资人应向中方提供制造产品所需的贸易秘密、制造技术和专有技术方面的资料。
投资人向中方提供的资料详见附件二。
第二条 设备规划
（1）中方必须按照投资人的建议准备产品生产设施。
（2）为了帮助在上海准备生产设施，投资人应提供援助，包括供应下列资料：
①生产线计划。
②生产劳动力安排计划。
③设备布局计划。
④基础设施计划，如水电供应、空调、运输、通讯等。
⑤设备安装操作计划。
⑥生产管理计划。
⑦推销计划。
上述资料应于本合同生效后60天内由投资人提供中方。
（3）生产线必须按照附于本合同的生产细目表，即附件三。
（4）中方应自行准备生产计划，但必要时可要求投资人给予合作。
第三条 许可费的支付
（1）投资人向中方转让技术的许可费如下：
①中方向投资人购买产品生产权应交入门费＿＿＿＿＿＿美元。
②每件出售的产品应向投资人交付售价3％的提成费。
（2）一切付款应按照本合同及本条款的有关约定事项办理。
（3）一切付款应通过中国银行办理。
（4）支付方式采用不可撤销的即期信用证，用美元支付。
（5）中方应在本合同生效后一个月内，开立不可撤销的信用证向投资人支付入门费。
（6）投资人应在收到上述信用证后30天内提供合同规定的一切技术资料。
（7）中方每次向投资人订购合同规定的材料时，应在信用证的金额中加上3％的提成费；也可在支付货款时，为提成费另开一份信用证。
（8）中方负责在中国发生的一切费用；投资人负责在国外发生的一切费用。
第四条 销售
（1）投资人应帮助中方兴趣办展销会、研讨会、广告宣传等，以推销中方生产的产品。但费用应由中方负担。
（2）在开展广告宣传等活动中，中方如有需要可以使用投资人的广告标识。但投资人既不参与中方的盈亏，也不对此承担责任。
第五条 质量控制
（1）在上海制造产品的质量必须按照投资人的质量控制标准进行鉴定。
（2）上海制造产品的质量检验，在开始阶段应由双方工程是由联合进行，其细节详见附件四。
（3）上海制造产品的质量检验必要时应进行两次。如果第二次检验未能达到规格指标而且原因又是在投资人方面，则投资人应自费解决存在的问题。
（4）如果品质检验合格，双方工程是由应签署品质检验证明书一式两份，每方各执一份。
第六条 设备交货
（1）中方应向投资人购买生产产品所需的设备。
（2）生产产品所需设备的品名、规格详见附件五。
（3）中方投资人购买设备的价格细节由双方商定，并另签设备购买合同。
（4）投资人运交的设备应该是新型的、未用过的。
（5）投资人向中方运交设备的价款应以不可撤销的即期信用证按cif中国口岸条件用美元支付。
共4页，当前第1页1234
篇15：进口合同样式二[页2]_合同范本
进口合同(样式二)
如果买方船只按时到达装运港，而卖方不能按规定的时间备妥货物以待装船，则由此而产生的空舱费及滞期费应由卖方负担。
15.3 在fob、cfr和cif条件下，卖方在货物装船完毕后应立即以电传/传真向买方及买方指定的代理人发出装船通知。装船通知应包括合同号、货物名称、数量、净重、毛重、包装尺码、发票金额、提单号码、启航期和预计到达的目的港的日期。如货物系危险品或易燃品，也应注明危规号。
15.4 在运载船只启航之后＿＿＿＿个工作日内，卖方应将本合同第14条中列举的单证的副本（各一份）航空邮寄给买方。
15.5 可以/不得转船。
15.6 可以/不得分运。
15.7 卖方有权在＿＿＿＿％数量内溢装或短装。
16.检验和索赔条款：
16.1 在货物运抵最终目的地的港后，买方有权向货物检验机构申请对货物进行检验。检验机构为中华人民共和国＿＿＿＿进出口商品检验局。
16.2 买方在货物到达最终目的地目的港卸货完毕之日起90日内，如发现货物之质量、规格、数量、重量、包装、安全或卫生条件与合同规定的不符，应在上述期限内向卖方发出索赔通知，并凭借上款规定的检验机构所发具的检验证书向卖方索赔。除由保险公司或航运公司应承担的责任外，卖方须就该索赔要求进行赔偿。
16.3 卖方应在收到于上述期限内由检验机构出具的检验证书以及索赔要求之后15日内回复买方。
16.4 买方有权就第16条和第17条所述货物缺陷所造成的损失向卖方要求索赔。
17.品质保证：
卖方保证其所提供的全部货物均符合本合同的规定，并且是全新和未使用过的。货物的质量保证期为自货物到达目的地之日目的港卸货完毕之日起12个月。在质量保证期内，凡因设计、制造工艺和所有材料而产生的缺陷，卖方应自负费用进行修理或更换货物或部件。
18.不可抗力：
任何一方对由于下列原因而导致不能或暂时不能履行全部或部分合同义务的，不负责任：水灾、火灾、地震、干旱、战争或其他任何在签约时卖方不能预料、无法控制且不能避免和克服的事件。但受不可抗力影响的一方，应尽快地将所发生的事件通知对方，并应在事件发生后15天内将有关机构出具的不可抗力事件的证明寄交对方。如果不可抗力事件之影响超过120天，双方应协商合同继续履行或终止履行的事宜。
19.仲裁：
因履行本合同所发生的一切争议，双方应友好协商解决。如协商仍不能解决争议，则应将争议提交中国国际经济贸易仲裁委员会（北京），依据其仲裁规则仲裁。仲裁裁决是终局的，对双方都有拘束力。仲裁费应由败诉一方承担，但仲裁委员会另有裁定的除外。在仲裁期间，除仲裁部分之外的其他合同条款应继续履行。
20.特殊条款：
本合同由双方代表签字后生效，一式两份，双方各执一份。
卖方： 买方：
授权代表：（签字） 授权代表：（签字）
共2页，当前第2页12
篇16：FDA进口预申报委托协议_合同范本
FDA进口预申报委托协议
甲方：______________________________
乙方：______________________________
鉴于甲方产品需（或准备）向美国出口，并希望乙方为其提供向fda进口预申报等相关服务。 乙方作为美国fda进口预申报代理机构，愿意根据fda的要求及本合同的约定，帮助甲方完成其在fda的进口预申报等工作。 为此，根据《中华人民共和国合同法》之规定，合同双方就fda进口预申报一事协商一致，签订本合同。
一、 委托事项
甲方同意接受《办理fda进口预申报合同补充条款》（见附件a），委托乙方在美国办理fda进口预申报事宜。乙方接受甲方的上述委托，乙方在办理fda事务业务时，仅作为甲方的代理，注册的所有结（后）果由甲方享有和承担。
二、 甲方在申请fda进口预申报应提交以下资料
1.《fda进口预申报申请表》中文（或英文）一份；
2.fda新增加的要求需提交的其他文件、资料。
三、 工作流程和办理注册期限：
1.工作流程：a.甲方提交“二”中所列资料；b.乙方审核合格后及时向fda申报；c. 将结果通报甲方。
2. 办理进口预申报期限：在甲方所提交的所有资料完整、签订《fda进口预申报委托代理协议》和付清款项后，自受理之日起____个工作日内完成，并立刻通知甲方。
四、 服务费用
进口预申报的费用：采取年费、季费或按次付费方式：
1.年费方式：出口货物全年发运申报包干服务费为_______美元。一年内负责通报______次，多于_____次的每多申报一次收费____美元。
2.季费方式：每季度（_______个月）申报包干服务费为_______美元。每季度内负责通报____次，多于____次的每多申报一次收费_______美元。
3.按次付费方式：每次委托申报费用为_______美元。
上述预付金额如用人民币支付，按付款当日官方汇率换算。
五、费用支付
按年度付费方式：fda进口预申报年度代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户一次性支付上述代理费。
按季度付费方式：fda进口预申报季度代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户一次性支付上述代理费。
按次付费方式：fda进口预申报每次代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户预付上述代理费。
如甲方迟纳服务费用，乙方将不对其申报文档进行处理，直到款到为止。由此造成的损失，由甲方自行负责。
六、 合同组成部分
本合同附件a本合同的组成部分。本合同自签字之日起生效，有效期一年。正本一式二份，双方各执一份，具有同等法律效力。
甲方（公章）：_____________ 乙方（公章）：_____________
委托代理人（签章）：_______ 委托代理人（签章）：_______
联系电话：_________________ 联系电话：?_______________
地址：_____________________ 地址：_____________________
邮编：_____________________ 邮编：_____________________
电子邮件：_________________ 电子邮件：_________________
公司帐号：_________________
共2页，当前第1页12
篇17：外贸代理合同_合同范本
本协议双方为了发展贸易，在平等互利的基础上，按下列条件签定本协议。
this agreement is entered into between the parties concerned on the basis of equality and mutual benefit to develop business on terms and conditions mutually agreed upon as follows:
1 订约人：
contracting parties：
供货人：
supplier： ( hereinafter called " party a ")
销售代理人：
agent：( hereinafter called " party b ")
甲方委托乙方为销售代理人，推销下列商品。
party a hereby appoints party b to act as his selling agent to sell the commodity mentioned below.
2 商品及数量或金额
commodity and quantity or amount
双方约定，乙方在协议有效期内，承销不少于_____的上述商品。
it is mutually agreed that party b shall undertake to sell not less than _____ of the aforesaid commodity in the duration of this agreement.
3 经销地区 只限在_____销售。
territory in_____only.
4 定单的确认
关于协议所规定的上述商品的每笔交易，其数量、价格及装运条件等须经甲方确认，并签定销售确认书，对交易做具体规定。
confirmation of orders
the quantities, prices and shipment of the commodities stated in this agreement shall be confirmed for each transaction, the particulars of which are to be specified in the sales confirmation signed by the two parties hereto.
5 付款
订单确认后，乙方须按照有关确认书所规定的时间开立以甲方为受益人的保兑的、不可撤消的即期信用证。乙方开出信用证后，应立即通知甲方，以便甲方准备交货。
payment
after confirmation of the order, party b shall arrange to open a confirmed, irrevocable l/c a vailable by draft at sight in favour of party a within the time stipulated in the relevant s/c. party b shall also notify pary a immediately after l/c is opened, so that party a can get prepared for delivery.
6 佣金
在本协议期满时，乙方完成了第二款所规定的数额，甲方当按装运货物所受到的全部发票金额付给乙方_____%的佣金。
commission
upon the expiration of the agreement and party bs fullfilment of the total turnover mentioned in article 2, party a shall pay to party b_____% commission on the basis of the aggregate amount of the invoice value already paid by party b of the shipments effected.
7 市场情况报告
乙方每三个月向甲方提供一次有关当时市场情况和用户意见的详细报告。同时，乙方应随时向甲方提供其它供应商所给的类似商品的样品及其价格、销售情况和广告资料。
reports on market conditions
party b shall forward once every three months to party a detailed reports on current market conditions and of consumers comments. meanwhile, party b shall, from time to time, send to party a samples of similiar commodities offered by other suppliers, together with their prices, sales informaiton and advertising materials.
共3页，当前第1页123
篇18：新员工入职介绍信流程_介绍信_网
新员工入职介绍信怎么写
1、称谓
对于明确个体直接称呼名字，对于全部个体就写“新员工”吧，
称呼写在第一行，顶格书写，之后用冒号，另起一行，写上问候语“您好!”。
2、正文
正文要另起一行，空两格开始写新员工入职通知的内容。正文内容要包括入职时间、部门、职位;报到流程;报到资料等。
3、结尾
另起一行，空两格，写表示祝贺的话。如：祝贺您成为我们的新同事，希望在此有一个美好的未来!
4、署名和日期
右下方署名某某公司人事部和发布日期。
5、提示
一般是员工须知，告诉新员工一些注意事项。
6、回执
表明员工入职到岗位的回复。
范例：
新员工入职介绍信(书面版)
：
你好!
我们很荣幸地通知您于______年____月____日(周___)到我公司______(部门) 部(小部门)入职，担任______一职。祝贺您即将成为我们公司的一员!
请在上班第一天携带个人资料(毕业证复印件、身份证复印件)交给 部门助理 (分机 )，在助理协助下详细填写好《员工登记表》办理入职手续。
员工须知：在入职到岗后请您仔细阅读公司各项规章制度并请严格遵照执行，对于因个人原因未能及时依据公司各项制度执行而引起的一切损失由员工本人承担全部责任，期待您成为我们的新同事!祝您在公司有一个美好的未来!
某某有限公司人事部
20xx年X月X日
················································································································································································································································································································
《新员工入职介绍信》回执：
尊敬的：
您好!
我入职到岗后会仔细阅读并严格执行公司规章制度，对于因个人原因未能及时依据公司各项制度执行而引起的一切损失由本人承担全部责任。
新员工签收：
日期：
新员工入职介绍信(电子版)
：
你好!
欢迎你成为扬子江大家庭中的一员!为了做好你的入职工作，现将XX年报到事宜通知如下，请仔细阅读。
一、报到安排
1、报到时间：7月8、9日8：00—17：00;
2、报到地点：泰州市高港区扬子江南路1号扬子江药业集团总部华虹公寓;
3、报到人员：集团总部新员工(包括江苏海慈生物药业有限公司和江苏医药经营有限公司新员工，详见附件一《新员工名单》)，其他子公司新员工的报到按照各子公司人力资源部的报到通知执行。
二、报到流程
1、请你根据指示牌到达集团总部华虹公寓报到处;
2、签到、领取培训材料等资料;
3、办理餐卡和住宿手续等;
4、X月X日~X日，早晨空腹，准备体检。
三、友情提示
1、乘坐火车的同学，可在网上查询最新火车时刻表，乘坐相应的火车到泰州站或南京站;乘坐汽车的同学，可以在当地的汽车站坐相应班次车到泰州客运中心(南站)。
2、接站与接待安排
公司将会于X月X、X日8：00—17：00在泰州火车站和泰州客运中心(南站)安排专人接站：
火车站接站联系人：刘， 联系电话：1XX5286XX37。
客运中心(南站)接站联系人：高X，联系电话：1XX7568XX01。
集团总部接待时间：X月X、X日8：00-21：00，联系人：王大炮，联系电话：159X18968。
3、个人乘车报到
篇19：对外贸易合同范本_合同范本
contract
对外贸易合同范本
no.:
date:
the buyers:
address :
tel: fax:
买方：
地址：
the sellers:
address:
tel: fax:
this contract is made by and between the buyers and the sellers, whereby the buyers agree to buy and the sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below:
买方与卖方就以下条款达成协议：
1. commodity:
item no.
description
名称及规格
unit
单位
qty
数量
unit price
单价
amount
总价
cip xi’an airport
total value cip xi’an airport usd
say u.s. dollars only.
2. country and manufacturers:
原产国及造商：
3. packing:制
to be packed in standard airway packing. the sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the packing.
包装：标准空运包装。如果由于不适当的包装而导致的货物损坏和由此产生的费用，卖方应对此负完全的责任。
4. shipping mark:
the sellers shall mark on each package with fadeless paint the package number, gross weight, net weight, measurement and the wordings: "keep away from moisture" "handle with care" "this side up" etc. and the shipping mark:
唛头：卖方应用不褪色的颜料在每个箱子外部
刷上箱号、毛重、净重、尺寸，并注明“防潮”、
“小心轻放”、“此面向上”等，唛头为:
5. time of shipment(装运期)：within days after receipt of l/c
6. port of shipment(装运港)：
7. port of destination(目的港)： , china
8. insurance(保险)：to be covered by sellers for 110% invoice value against all risks.
9. payment(付款方式)the buyer open an irrevocable 100% l/c at sight in favor of seller
信用证付款：买方给卖方开出100%不可撤销即期信用证。
银行资料：
10. documents:
1. full set of air waybill in original showing “freight prepaid” and consigned to applicant. 空运提单一套
2. invoice in three copies. 发票一式叁份
3. packing list in three copies issued by the sellers. 装箱单一式叁份
4. certificate of quality issued by the sellers. 制造厂家出具的质量证明书
5. insurance policy. 保险单一份
6. certificate of origin issued by the sellers. 原产地证书
7. manufacturer’s certified copy of fax dispatched to the applicant within 24 hours after shipment advising
flight no., b/l no., shipment date, quantity, gross weight, net weight, and value of shipment.
制造厂家通知开证申请人有关货物装运的详细资料传真复印件壹份
8. the seller’s certificate and waybill certifying that extra documents have been dispatched according
to the contract terms by express airmail.
卖方有关另外用特快邮寄壹套单据给开证申请人的证明书及邮寄底单.
9. certificate of no wooden packing or certificate of fumigation.非木包装声明或熏蒸证.
in addition, the sellers shall, within three days after shipment, send by express airmail one extra sets of
the aforesaid documents directly to the buyers.
另外，卖方应于货物发运后三天内，用特快专递寄送一套上述的单据给买方。
11. shipment:
the sellers shall ship the goods within the shipment time from the port of shipment to the destination. transshipment is allowed. partial shipment is not allowed.
运输：卖方应于交货期内将合同货物从装货港运到目的港，不许分批，允许转运。
12. shipping advice:
the sellers shall, immediately upon the completion of the loading of the goods, advise by fax the buyers of the contract no., commodity, quantity, invoiced value, gross weight, name of vessel and date of delivery etc. in case due to the sellers not having faxed in time, all losses caused shall be borne by the sellers.
装运通知：卖方应于装货后，立即用传真将有关合同号、货物、数量、发票价值、毛重、运输工具名称、交货日期、货物预计抵达日等资料通知买方。如果由于卖方未能通知买方而造成的所有损失均由卖方承担。
13. guarantee of quality:
the sellers guarantee that the commodity hereof is made of the best materials with first class workmanship, brand new and unused, and complies in all respects with the quality and specification stipulated in this contract. the guarantee period shall be 12 months counting from the date of signing the acceptance report of this machine at the end-users site.
质量保证：卖方保证合同货物采用最好的材料、精湛的做工、全新、未使用过、质量和技术规格均符合合同的要求。质保期为最终用户签定验收报告后12个月内。
14. claims:
within 90 days after the arrival of the goods at destination, should the quality, specification, or quantity be found in unconformity with the stipulations of the contract except those claims for which the insurance company or not the owners of the vessel are liable, the buyers shall, on the strength of the inspection certificate issued by the state administration for entry-exit inspection and quarantine of p.r.c. or the site inspection report issued by the seller’s engineer, have the right to claim for replacement with new goods, or for compensation, and all expenses (such as inspection charges, freight for returning the goods and for sending the replacement, insurance premium, storage and loading and unloading charges etc.) shall be borne by the sellers. as regards quality, the sellers shall guarantee that if within 12 months from the date of signing the acceptance report of this machine, damages occur in the course of operation by reason of inferior quality, bad workmanship or the use of inferior materials, the buyers shall immediately notify the sellers in writing and put forward a claim supported by inspection certificate issued by the state administration for entry-exit inspection and quarantine of p.r.c. .the certificate so issued shall be accepted as the base of a claim. the sellers, in accordance with the buyers claim shall be responsible for the immediate elimination of the defect(s), complete or partial replacement of the commodity or shall devaluate the commodity according to the state of defect(s), . if the sellers fail to answer the buyers within one month after receipt of the aforesaid claim, the claim shall be reckoned as having been accepted by the sellers.
索赔：货物抵达目的地后90天内，如果质量、技术规格或数量发现与合同的规定不符(除过保险公司和运输公司的责任所负)，买方应该依据中华人民共和国出入境检验检疫局的检验报告或者是卖方的调试人员在安装调试时出具的报告，有权要求替换或补偿，所有的费用(包括商检费、替补件来回的运费、保险费、仓储费、货物装货卸货费等)均由卖方承担。卖方的质量保证为签定关于此批货物的验收报告后12个月内;由于货物内在的质量、差的做工、选材不当而造成操作中的货物损坏，买方应立即书面通知卖方，并同时随附中国商检局出具的检验报告作为索赔依据。卖方在接到买方的索赔后，有责任立即解决相应的质量问题、全部或部分地替换货物或根据货物损坏的程度进行折价; 如果卖方在收到买方的上述索赔后一个月内未能作出答复，则视为索赔已为卖方所接受。
15. force majeure:
the sellers shall not be held responsible for the delay in shipment or non-delivery of the goods due to force majeure, which might occur during the process of manufacturing or in the course of loading or transit. the sellers shall advise the buyers immediately of the occurrence mentioned above and within fourteen days thereafter, the sellers shall send by airmail to the buyers for their acceptance a certificate of the accident issued by the competent government authorities where the accident occurs as evidence thereof. under such circumstances the sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. in case the accident lasts for more than 10 weeks, the buyers shall have the right to cancel the contract.
不可抗力：对于制造或装船运输过程中可能产生的不可抗力而造成的迟交货或不能交货，卖方可以不承担责任。卖方应立即在不可抗力产生的十四日内将有关情况通知买方，并且卖方应用航空邮件将有关政府当局部门出具的证明不可抗力产生的文件寄送给买方。在此情况下，卖方仍应尽最大努力采取各种措施促使货物的发运。如果事故持续十周，买方有权取消该合同。
16. late delivery and penalty:
should the sellers fail to make delivery on time as stipulated in the contract, with exception of force majeure causes specified in clause 15 of this contract. the buyers shall agree to postpone the delivery on condition that the sellers agree to pay a penalty which shall be deducted by the paying bank from the payment. the penalty, however, shall not exceed 5% of the total value of the goods involved in the late delivery. the rate of penalty is charged at 0.5% for every seven days. odd days less than seven days should be counted as seven days. in case the sellers fail to make delivery ten weeks later than the time of shipment stipulated in the contract, the buyers shall have the right to cancel the contract and the sellers, in spite the cancellation, shall still pay the aforesaid penalty to the buyers without delay.
迟交货和罚金：如果卖方未能按合同规定及时交货(除了本合同15条款所言的不可抗力)，买方同意在卖方付罚金的前提下迟交货。罚金的金额不超过迟交货的合同货物部分的价值的5%，罚金按每7日0.5%计算，少于7日的增加天数按7日计。如果卖方未能于合同规定的交货期之后的十周内发运，买方有权取消该合同，除此之外，卖方仍要将有关罚金不加拖延地付给买方。
17. arbitration:
any dispute arising from or in connection with this contract shall be submitted to china international economic and trade arbitration commission for arbitration which shall be conducted in accordance with the commissions arbitration rules in effect at the time of applying for arbitration. the arbitral award is final and binding upon both partied. arbitration fee shall be borne by the losing party.
仲裁：与此合同有关的争议应通过友好协商解决。如果协商无法解决，提交中国国际经济贸易仲裁委员会进行仲裁。按照申请仲裁时该会现行有效的仲裁规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。仲裁费用由败诉方承担。
18.bank charges: all bank charges outside china will be on the account of the sellers.
银行费用：所有中国之外的银行费用均由卖方承担。
19.other: this contract signed in three copies, the seller holds one copy and the buyer hold two copies.
其它：本合同一式叁份，卖方执壹份, 买方执贰份。
the buyers the sellers
篇20：2024外贸业务员个人工作计划_业务员工作计划_网
每一个业务员的工作都是不简单的，工作计划就是为了降低难度。下面是小编整理的关于外贸业务员的个人工作计划，欢迎阅读。
个人的工作计划(一)
很荣幸能有机会加入XX集团。虽入职时间较短，仍深深地感受到我司井然有序的管理秩序及我们部门充满朝气的团队氛围。在这个岗位上，我明*临的机遇和挑战都是巨大的，外贸业务知识及经验的积累都需要自身不断的努力和学习。
在新的一年里，我对自己的工作情况计划如下：
首先，学习外贸知识、产品知识。对一名刚从英语系毕业一年半的外贸新手来说，我的外贸知识还有待于加强，需要在往后的工作中进一步积累。此外，刚刚接触这个行业，对产品的认知我几乎是一片空白。因此，学习是我新年计划中的首要环节和重要任务。我会以一种积极的态度虚心向领导及各位同事请教。在我的个人观念里，态度决定成败，希望自己的努力会得到大家的肯定。
其次，学习缮制单据。在熟悉整套外贸流程理论知识之余，锻炼自己的实际操作能力。因为此前一年多的工作经验都只是局限于业务方面，重点在与客户的沟通上。单据的制作以及出口流程中跟银行、商检、海关、贸促会等相关部门的接触，都是我面临的新的工作。由此，我也体会到自己以前掌握的工作环节并不全面、完整。现在能从最基本的出口单证做起，对我来说是一个不可多得的学习机会。
第三，如有机会接触公司业务，我希望能尽快熟悉自己跟的每一个客户，总结并分析他们的新特点，以一颗热忱的心为客户服务，为公司创利!
第四，积极开拓新业务，充分利用网络资源为公司寻找目标客户。及时更新我司在阿里巴巴等相关网站上发布的供求信息，并持之以恒地跟踪，相信长久的付出总会有一定的成效。
第五，协助领导及同事做好两届展会及其它国外展会的前期准备工作。在展会结束后，协助参展人员做好后续的客户跟踪服务，以此巩固展会成果。
另有几条小小的建议：
一、因经理在业务洽谈方面会经常与客户进行电话沟通。为此提议是否可在电脑上安装Skype软件，申请一个Skype帐号，并向客户积极推荐这一网上及时沟通工具。其通话质量与手机差不多，还可节省双方的国际长途电话费用。
二、部门内部多开展一些活动，在活动中增强整个团队的凝聚力。
三、对新人多开设外贸知识及业务知识的内部培训课程。
最后，再次感谢领导对我的信任。相信在这个优秀的团队中，我将受益不少。同时，我也期待自身的不断完善能为公司的发展贡献一份力量!
个人的工作计划(二)
新的一年，制定良好且有效的工作计划对于今后的发展起着很重要的作用，既不浪费时光和精力，同时也能改善自身的一些不足，提高自我对客户的沟通潜力，促使工作开展顺利。
增强职责感，增强服务意识，增强团队意识。用心主动把工作做到点上，落到实处。明确自我的工作职责，遇到问题要及时分析问题，解决问题，服从上级的安排。
在此我订立了工作计划，以便自我在新的一年里有更大的进步和成绩。
一.产品市场分析
1。广告光源一向是外贸的主推方向，灯帘、灯条、灯管、模组、超薄灯箱都比较有优势，很多的产品的价格已经比之前的低了很多。今后还需要多做一些产品优势的比较文档，产品案例分许与应用，让客户更加了解我们的产品。
2。商业照明灯具由于价格比较高，很多国外客户基本不能理解。但还是需要更多的了解产品，多做优势比较文档，寻找优质高端客户。
3。高端产品就需要寻找优质客户。目标客户定位在美国、迪拜、日本等国家。用心运用不一样的搜索引擎寻找客户，不能只依靠阿里巴巴，。
二.对日后工作的安排
1。在开发客户这方面，可适当的改变策略，增加在免费平台上和商业网站上发布供应信息;参加一些展会;尝试用国外的本地搜索引擎。以寻找目标市场的商业网站、行业协会网站、商会网站及产品专业网站为方向，了解并联系目标市场知名度高销售网络庞大的进口商。
2。在和客户沟通这方面，很重要的一点是确保带给给客户的信息是正确并能到达的的。当客户没下单前，了解客户的性质(是中间商还是最终使用者)，到达知己知彼。在客户下单后，需及时向客户汇报交期，询问是否仍有询价。
3。发货后，可在客户收到货一周后追踪产品的质量反馈，如有问题，首先要明确自我对于这个事件的态度，同时要及时帮客户解决问题，
4。在追踪客户这方面，适时发邮件向客户问候并询问是否有采购计划，每次追踪问候都需不一样，换个方式问。备忘客户的一些重大节日和生日，在这些有纪念好处的日子里送上自我的一份祝福，给客户心底留下一个亲切的印象。
三.20xx销售目标
明年的销售目标最基本的是做到月月有进帐的单子，争取2~3个大订单，向年销售额60万进军。根据自我制定的任务，把任务根据具体状况分解到每个季度、每月、每周、每日，在不断归纳总结吸取教训的基础上提高销售业绩。
1。年销售目标：60万。
2。月销售目标：5万。
①现有已成交客户8个，争取明年争取更多的订单，保证成交量在10万以上;
②优化网站，收更多的询盘，用心跟进客户，争取成交量在10万以上;
③搜索引擎营销，比如，等国际搜索引擎上的搜索，争取成交量在10万以上;④国际展会、交流会，提前做好宣传资料及产品报价资料的详尽文件图片，寻找更多的客户;⑤重点参考之前成功案例分析有效的营销途径和方式方法。
四.明年对自我有以下要求
1。做好每一天的工作记录，避免遗忘重要事项。做好客户的跟踪，对客户的联系进度及时记录，对以往与客户相互间发送的技术及报价资料要归类整理好，以便随时联系。与外贸的同事一齐总结，周一小结，每月一大结，看看有哪些工作上的失误，及时改正下次不要再犯。2。接触客户之前要多查、了解顾客所在的公司的主要产品，不要千篇一律的回复邮件。以便决定客户的需要和问题，然后针对顾客的需要和问题，提出建设性的意见。如提出能够增加顾客销售量或能够使顾客节省费用、增加利润的方法。向客户做出建设性意见，会更有利于赢得客户的好感，这样能够给客户留下良好的印象，有利于长期接触。了解市场需求，客户需求，争取“按照客户需要带给定制服务”
3。对客户不能有隐瞒和欺骗，这样才会有长远的客户。在有些问题上你和客户是一致的。对所有客户的工作态度都要一样，但不能太低三下气。给客户一好印象，为公司树立更好的形象。客户遇到问题，不能置之不理必须要尽全力帮忙他们解决。要先做人再做生意，先卖信誉后卖产品，让客户相信我们的工作实力，才能更好的完成任务。
以上就是我这一年的工作计划，工作中总会有各种各样的困难，我会向领导请示，向同事探讨，共同努力克服。要有好业绩就得加强业务学习，开拓视野，丰富知识，不断学习行业新知识，新产品，为客户带来实用的资讯，更好为客户服务。
个人的工作计划(三)
现在我已经在公司担任业务员有四年的时间了。可以说我是公司数得着的老业务员之一，也是对公司的发展有一定贡献了。现在20xx年将结束，我想在岁末的时候就我一年的工作做一下总结，也对自己的工作提前写下了20xx年业务员工作计划范文，让自己在假期中能够安稳的度过，也让自己能够及时的认识到当前的形势，希望不会让自己失望!
转眼间又要进入新的一年20xx了，新的一年是一个充满挑战、机遇与压力开始的一年，也是我非常重要的一年。出来工作已过个年头，家庭、生活和工作压力驱使我要努力工作和认真学习。在此，我订立了本年度工作计划，以便使自己在新的一年里有更大的进步和成绩。
一、熟悉公司新的规章制度和业务开展工作。公司在不断改革，订立了新的规定，特别在诉讼业务方面安排了专业法律事务人员协助。作为公司一名老业务人员，必须以身作责，在遵守公司规定的同时全力开展业务工作。
在第一季度，以诉讼业务开拓为主。针对现有的老客户资源做诉讼业务开发，把可能有诉讼需求的客户全部开发一遍，有意向合作的客户安排法律事务专员见面洽谈。期间，至少促成两件诉讼业务，代理费用达万元以上(每件万元)。做诉讼业务开发的同时，不能丢掉该等客户交办的各类业务，与该等客户保持经常性联系，及时报告该等客户交办业务的进展情况。
在第二季度的时候，以商标、专利业务为主。通过到专业市场、参加专业展销会、上网、电话、陌生人拜访等多种业务开发方式开发客户，加紧联络老客户感情，组成一个循环有业务作的客户群体。以至于达到4.万元以上代理费(每月不低于 1.万元代理费)。在大力开拓市场的同时，不能丢掉该等客户交办的各类业务，与该等客户保持经常性联系，及时报告该等客户交办业务的进展情况。
第三季度的“十一”“中秋”双节，带来的无限商机，给后半年带来一个良好的开端。并且，随着我对高端业务专业知识与综合能力的相对提高，对规模较大的企业符合了《中国驰名商标》或者《xx省著名商标》条件的客户，做一次有针对性的开发，有意向合作的客户可以安排业务经理见面洽谈，争取签订一件《xx省著名商标》，承办费用达7.万元以上。做驰名商标与著名商标业务开发的同时，不能丢掉该等客户交办的各类业务，与该等客户保持经常性联系，及时报告该等交办业务的进展情况。
第四季度就是年底了，这个时候要全力维护老客户交办的业务情况。首先，要逐步了解老客户中有潜力开发的客户资源，找出有漏洞的地方，有针对性的做可行性建议，力争为客户公司的知识产权保护做到最全面，代理费用每月至少达万元以上。
二、制订学习计划。学习，对于业务人员来说至关重要，因为它直接关系到一个业务人员与时俱进的步伐和业务方面的生命力。我会适时的根据需要调整我的学习方向来补充新的能量。专业知识、综合能力、都是我要掌握的内容。知己知彼，方能百战不殆，在这方面还希望业务经理给与我支持。
三、增强责任感、增强服务意识、增强团队意识。积极主动地把工作做到点上、落到实处。我将尽我最大的能力减轻领导的压力。
以上，是我对20xx年的个人工作计划，可能还很不成熟，希望领导指正。火车跑的快还靠车头带，我希望得到公司领导、部门领导的正确引导和帮助。展望 20xx年，我会更加努力、认真负责的去对待每一个业务，也力争赢的机会去寻求的客户，争取的单，完善业务开展工作。相信自己会完成新的任务，能迎接20xx年新的挑战。
20xx年，我有着的期待，相信自己一定能够在20xx年取得更大的进步，自己就是这样一年一年的走过来的，从一个什么都不懂的毛头小伙到现在很有深度的资深公司业务员，我的成长充满了曲折，不过在今后的工作中，我还是需要继续不断的努力，相信自己在 20xx年一定走的更远!
个人的工作计划(四)
转眼间又到了新的一年。20xx，又是一个充满挑战、机遇与压力并存的一年。应对竞争激烈而又现实的社会，生活和工作压力驱使我要努力工作和认真学习。让自我成为一个有真正实力的人!
在此我订立了工作计划，以便自我在新的一年里又更大的进步和成绩。
一：熟悉公司的规章制度和工程管理的开展，熟悉自我工作岗位的业务流程。
二：增强职责感、增强服务意识、增强团队意识。用心主动地把工作做到点上、落到实处。我将尽我最大的潜力减轻领导的压力。明确自我的工作职责，遇到问题时要及时的去分析问题，解决问题，服从上级的安排。
三：公司在不断的改革，订立了新的规定，作为公司的一员，务必以身作则，遵守公司的规定。
如何开展工作：
1。以寻找目标市场的商业网站、行业协会网站、商会网站及产品专业网站为方向，了解并联系目标市场知名度高销售网络庞大的进口商。
2。基于目前手头联系的较多的客户，打算先从其着手，了解的途径主要按照上述说明的方向。透过谷歌和百度等网络搜索引擎找到相关网站网址。
3。准确明白其他国家一些大采购商的联系方式后，接下来就是如何将他们开发成为我们的客户了。
4。认真对待收到的每封询盘，及时处理并跟进客户。必要时做好相应笔记。在一些免费的b2b平台上，发布产品信息，推广我们的产品。
同时在与客户沟通的过程中，挖掘他们国家同行业进口的信息。至于能收获多少，看沟通方式和客户的意愿等因素了。
5。对已经下单的客户，制作客户维护跟进表，详细记录跟进信息，了解产品使用反馈信息，掌握变动。
6。对意向客户，多多持续联系，有计划有区别的发送邮件，并电话联系。7。对意向不明确的客户，按照开发信模板，每两天发一封邮件。8。每周五做好工作总结
以上是我针对20xx年的工作计划和发展方向，我会更加努力、认真负责的去对待本岗位的工作，期望透过自我的努力和他人的协助能够成功的达成计划并突破，取得更好的成绩并提高自我。
个人的工作计划(五)
此刻我已经在公司担任业务员有四年的时光了。能够说我是公司数得着的老业务员之一，也是对公司的发展有必须贡献了。此刻20xx年将结束，我想在岁末的时候就我一年的工作做一下总结，也对自我的工作提前写下了20xx年业务员工作计划范文，让自我在假期中能够安稳的度过，也让自我能够及时的认识到当前的形势，期望不会让自我失望!
转眼间又要进入新的一年20xx年了，新的一年是一个充满挑战、机遇与压力开始的一年，也是我十分重要的一年。出来工作已过个年头，家庭、生活和工作压力驱使我要努力工作和认真学习。在此，我订立了本年度工作计划，以便使自我在新的一年里有更大的进步和成绩。
一、熟悉公司新的规章制度和业务开展工作。公司在不断改革，订立了新的规定，个性在诉讼业务方面安排了专业法律事务人员协助。作为公司一名老业务人员，务必以身作责，在遵守公司规定的同时全力开展业务工作。
在第一季度，以诉讼业务开拓为主。针对现有的老客户资源做诉讼业务开发，把可能有诉讼需求的客户全部开发一遍，有意向合作的客户安排法律事务专员见面洽谈。期间，至少促成两件诉讼业务，代理费用达万元以上(每件万元)。做诉讼业务开发的同时，不能丢掉该等客户交办的各类业务，与该等客户持续经常性联系，及时报告该等客户交办业务的进展状况。[由整理]
在第二季度的时候，以商标、专利业务为主。透过到专业市场、参加专业展销会、上网、电话、陌生人拜访等多种业务开发方式开发客户，加紧联络老客户感情，组成一个循环有业务作的客户群体。以至于到达4。万元以上代理费(每月不低于1。万元代理费)。在大力开拓市场的同时，不能丢掉该等客户交办的各类业务，与该等客户持续经常性联系，及时报告该等客户交办业务的进展状况。
第三季度的十一中秋双节，带来的无限商机，给后半年带来一个良好的开端。并且，随着我对高端业务专业知识与综合潜力的相对提高，对规模较大的企业贴合了《中国驰名商标》或者《广东省著名商标》条件的客户，做一次有针对性的开发，有意向合作的客户能够安排业务经理见面洽谈，争取签订一件《广东省著名商标》，承办费用达7。万元以上。做驰名商标与著名商标业务开发的同时，不能丢掉该等客户交办的各类业务，与该等客户持续经常性联系，及时报告该等交办业务的进展状况。
第四季度就是年底了，这个时候要全力维护老客户交办的业务状况。首先，要逐步了解老客户中有潜力开发的客户资源，找出有漏洞的地方，有针对性的做可行性推荐，力争为客户公司的知识产权保护做到最全面，代理费用每月至少达万元以上。
二、制订学习计划。学习，对于业务人员来说至关重要，因为它直接关系到一个业务人员与时俱进的步伐和业务方面的生命力。我会适时的根据需要调整我的学习方向来补充新的能量。专业知识、综合潜力、都是我要掌握的资料。知己知彼，方能百战不殆，在这方面还期望业务经理给与我支持。
三、增强职责感、增强服务意识、增强团队意识。用心主动地把工作做到点上、落到实处。我将尽我最大的潜力减轻领导的压力。
以上，是我对20xx年的个人工作计划，可能还很不成熟，期望领导指正。火车跑的快还靠车头带，我期望得到公司领导、部门领导的正确引导和帮忙。展望20xx年，我会更加努力、认真负责的去对待每一个业务，也力争赢的机会去寻求的客户，争取的单，完善业务开展工作。相信自我会完成新的任务，能迎接20xx年新的挑战。
20xx年，我有着的期盼，相信自我必须能够在20xx年取得更大的进步，自我就是这样一年一年的走过来的，从一个什么都不懂的毛头小伙到此刻很有深度的资深公司业务员，我的成长充满了曲折，但是在今后的工作中，我还是需要继续不断的努力，相信自我在20xx年必须走的更远!