技术出股份怎么算(通用20篇)

本合同于____年____月____日在________签订.

甲方为:中国_________公司

合同工厂:中国______厂(以下简称甲方)

乙方为：_____国____公司(以下简称乙方)

第一章合同内容

1.1乙方同意向甲方提供制造______合同产品的书面及非书面专有技术。用该项技术所生产的合同产品的品种,规格,技术性能等详见本合同附件一(略)。

1.2乙方负责向甲方提供制造,使用和销售合同产品的专有技术和其它所有有关技术资料。技术资料的内容及有关事项详见本合同附件二(略)。

1.3乙方负责安排甲方技术人员在乙方工厂进行培训,乙方应采取有效措施使甲方人员掌握制造合同产品的技术,具体内容见本合同附件三(略)。

1.4乙方派称职的技术人员赴甲方合同工厂进行技术服务.具体要求详见本合同附件四(略)。

1.5乙方同意在甲方需要时,以最优惠的价格向甲方提供合同产品的备件。届时双方另签协议。

1.6乙方有责任对本合同项目甲方需要的关键设备提供有关咨询。

1.7乙方应向甲方提供合同产品的样机,铸件和备件,具体内容详见本合同附件五(略)。

1.8甲方销售合同产品和使用乙方商标的规定,见本合同第八章。

第二章定义

2.1合同产品指本合同附件一中所列的全部产品。

2.2蓝图指乙方制造合同产品目前所使用的总图,制造图样,材料规范及零件目录等的复制件。

2.3技术资料是指为生产合同产品所必须具有的乙方目前正用于生产合同产品的全部专有技术和其它有关设计图纸,技术文件等。

2.4标准指为制造合同产品向甲方提供的技术资料中,由乙方采用和制定的标准。

2.5入门费指由于乙方根据本合同第一章1.2条,1.3条,1.4条,1.6条,1.7条规定的内容以技术资料转让的形式向甲方提供合同产品的设计和制造技术,甲方向乙方支付的费用。

2.6提成费指在本合同有效期内,由于乙方所给予甲方连续的技术咨询和援助,以及甲方在合同有效期内连续使用乙方的商标和专有技术,甲方向乙方支付的费用。

2.7合同有效期指本合同开始生效的时间到本合同14.3条规定的本合同终止时间的期间。

第三章价格

3.1按本合同第一章规定的内容,甲方向乙方支付的合同费用规定如下: 3.1.1入门费为_____美元(大写)这是指合同产品有关的资料转让费和技术培训费,包括技术资料在交付前的一切费用。入门费为固定价格。

3.1.2合同产品考核验收合格后,甲方每销售一台合同产品的提成费为基价的______%。甲方向乙方购买的零件不计入提成费。

3.1.3计算提成费的基价应是甲方生产合同产品当年十二月三十一日有效的,乙方在_____国______市公布和使用的每台目录价格的_______%。

3.2乙方同意返销甲方生产的合同产品.返销产品的金额为甲方支付乙方全部提成费的______%。返销的产品应达到乙方提供的技术性能标准。每次返销的产品品种,规格,数量,交货期由双方通过友好协商确定。返销产品价格按3.1.3条规定的提成基价计算,即目录价格的______%。

第四章支付和支付条件

4.1本合同项下的一切费用,甲方和乙方均以美元支付。甲方支付给乙方的款项应通过_____中国银行和_____国____银行办理。如果乙方和甲方偿还金额,则此款项应通过_____银行和_____中国银行办理。所有发生在中国银行的费用,由甲方负担.发生在中国以外的银行费用由乙方负担。

4.2本合同第三章规定的合同费用,甲方按下列办法和时间向乙方支付:

4.2.1甲方收到下列单据,并审查无误后___天内向乙方支付入门费___美元(大写)。

(a)由乙方出具保证函.在乙方不能按照合同规定交付技术资料,保证偿还___美元。

(b)即期汇票正,副本各一份。

(c)应支付金额为入门费总价的形式发票正本一份,副本三份。

(d)乙方出具的第一阶段产品的技术资料,样机,铸件和备件交付完毕的证明信正,副本各一份。

4.2.2甲方收到乙方交付第二阶段产品的下列单据,并审查无误后____天内向乙方支付_____美元(大写)。

(a)即期汇票正,副本各一份。

(b)商业发票正本一份,副本三份。

(c)空运提单正本一份,副本三份。

(d)乙方出具的第二阶段产品的技术资料,样机,附件五规定的____已交付完毕的证明信副件各一份。

4.2.3合同产品第一批样机验收合格后,甲方收到乙方下列单据,并审查无误后____天内,向乙方支付____美元(大写)。

甲方：

乙方：

时间：

甲方：

乙方：

双方经过平等协商，在真实、充分地表达各自意愿的基础上，根据《中华人民共和国民法典》的规定，达成如下协议，并由双方共同恪守。

一、服务内容

1、技术服务的目标

保证甲方使用的__________________能够正常稳定的运行。

2、技术服务的内容

自生效之日起，在技术服务期限内，乙方保证甲方能正常使用____________系统(不包含新业务对应的开发、文档提供、人员培训、数据整理和上线工作)，包括：协助排除系统使用故障、系统的修复，系统使用咨询，定期巡检与回访，系统性能优化建议。

3、对现有软件的功能性修改以及新业务对应的开发、文档提供、数据整理和上线工作等.

4、技术服务方式

(1)、8×5小时电话或者支持;

(2)、远程技术支持;

(3)、现场技术支持：需甲方提供差旅费。

5、技术服务期限：__年_月__日到__年__月__日。

二、乙方服务工作

1、对于简单的问题(故障不影响甲方系统正常使用的情况下)，在2个工作日内，提供电话和支持并解决问题。

2、对于影响甲方系统正常使用的问题，即时响应并应在8小时内解决问题或提供可直接解决问题的书面技术方案。

3、乙方在技术服务期内每两个月与甲方一起通过电话会议的方式讨论有关系统运行的情况。

4、乙方如果有软件升级的补丁，及时通知甲方软件升级信息(非二次开发部分)，如甲方有需求，乙方提供升级补丁，并协助甲方更新完成。

5、如果甲方系统遇到了需要乙方现场解决的问题，差旅费由甲方支付，按照甲方同级员工标准(甲方负担乙方派出人员的往返机票与住宿)。

6、乙方有权拒绝甲方提出的本合同规定范围之外的服务请求。

7、乙方不承担因甲方进行非法操作、感染病毒、硬件出现故障等原因所导致的数据混乱、丢失的责任。

8、在本合同生效日以前属于乙方尚未解决的系统问题，由乙方继续完成，不受本合同约束。

三、为保证乙方有效进行技术服务工作，甲方应当向乙方提供下列工作条件和协作事项：

1、提出准确的服务请求，提供有关的背景资料、技术数据等。

甲方应通过电话或是书面方式向乙方通报系统运行中的问题。

2、积极配合乙方提出的配合请求，提供必须的工具软件，提供其他工作、生活条件。

3、允许乙方拔号访问软件正在运转的设备，享有与甲方员工同样的接触设备的权利。

4、负责监督，控制及管理软件的使用。

负责实施信息保护及建立备用设施以防止软件或设备出现错误或发生故障。

5、应记录并及时将有关软件的错误或故障报告给乙方。

应该在收到乙方的解决办法后的合理时间内采取必要的措施纠正这些错误或故障。

6、保存一份所有的当前程序和数据的备份。

7、约束其员工正确使用和应用软件。

8、甲方应指定熟悉软件操作的人员作为和乙方之间有关服务请求登记和报告的联系人。

9、提供符合要求的网络和设备以确保可以正常进行远程技术支持。

四、报酬及支付方式

1、技术服务费总额为：_______________元(大写：人民币_______________________整)

2、支付方式

合同签定后一周内付清全款。

五、保密义务

1、保密内容(包括技术信息和经营信息)

(1)、双方都有责任对对方提供的技术情报、资料数据及商业秘密保密，不得向第三方泄露。

(2)、未经对方同意，任何一方不得以任何形式公开合同内容。

(3)、双方在未征得对方同意的情况下，不得向第三方泄露在项目中接触到的需要保密的情报和资料。

(4)、任何一方未征得对方同意，不得为任何其他目的而自行使用或允许他人使用从对方获得的信息(信息指包括但不限于所有的报告、摘录、纪要、文件、计划、报表、复印件等)。

2、涉密人员范围

双方应对参与项目的工作人员严格要求，遵守保密协议，不得将相关资料泄露给第三方。

3、保密期限

合同期间及合同终止后五年内。

4、泄密责任

任何一方违反保密义务的，需向对方支付合同总额10%的违约金，不足以弥补对方损失的，应当另行赔偿。

六、本合同的变更必须由双方协商一致，并以书面形式确定。

但有下列情形之一的，一方可以向另一方提出变更合同权利与义务的请求，另一方应当在五日内予以答复;逾期未予答复的，视为同意：

1、一方发生解散、破产、吊销情况的。

2、一方发生合并、分立情况的。

七、违约责任

甲方：

1、逾期支付服务费用，每逾期一周，应向乙方支付应付款1%的违约金，违约金不超过合同总额的15%。

甲方逾期付款达2(二)个月，乙方有权单方面解除本合同，甲方除承担本合同约定的付款义务外，还需向乙方支付合同总额20%(百分之二十)的违约金。

乙方：

1、乙方提供服务不符合合同约定，负责返工或提供补救措施。

乙方因本合同履行所承担的责任累计不超过本合同技术服务费总额的15%。

2.下列情况下造成服务不符合约定的，乙方不承担违约责任：

(1)、设备使用过程中因设备自身的问题而造成的故障。

(2)、甲方服务范围外的其它设备出现故障而导致的系统故障。

(3)、第三方操作系统、数据库平台缺陷。

(4)、甲方操作人员安装软件不正确或使用软件时违反操作规程。

(5)、甲方在服务器上安装与业务无关的其他软件、上网下载软件、玩电脑游戏等，使系统感染病毒、或破坏系统。

(6)、甲方人员擅自变更设备配置。

(7)、不可抗力造成的系统故障。

八、双方确定，在本合同有效期内，甲方指定____________为甲方项目联系人，乙方指定____________为乙方项目联系人。

项目联系人承担以下责任：

1、甲方的项目联系人负责将问题及时反馈给乙方的项目联系人。

2、乙方的项目联系人负责将接收到的问题及时指定分配给相关的技术人员，并督促其在规定的时间内解决。

一方变更项目联系人时，应当及时以书面形式通知另一方。

未及时通知并影响本合同履行或造成损失的，应承担相应的责任。

九、双方确定，出现下列情形，致使本合同的履行成为不必要或不能的，可以解除本合同：

1、发生不可抗力。

2、因一方违约使合同不能继续履行或没有必要继续履行。

十、权利说明

甲方理解并同意在未持有乙方出具的有效授权委托书(加盖乙方公章并有乙方法定代表人签字或签章，但甲方仅对此作形式审查，且不负责对公章或签字的真伪进行判断或鉴别)或者双方之间按照本合同规定的生效条件已经存在生效的书面合同的约定，乙方任何业务经办人员无论以口头形式或书面形式作出的任何业务承诺、任何行为(包括但不限于未经乙方授权以乙方名义、以乙方业务员名义发出业务订单，接收、验收或确认任何工作成果)，都不能代表乙方，该种行为完全是其个人行为，甲方同意由此发生的所有法律后果都由其个人承担，无权向乙方主张任何权利。

十一、争议解决办法

双方因履行本合同而发生争议，应协商、调解解决。

协商、调解不成的，向原告所在地法院起诉。

十二、其他事项

1、本合同一式四份，甲乙双方各持二份。

具有同等法律效力。

2、本合同经双方签字盖章后生效。

甲方：_________________________

地址：_________________________

联系电话：_________________________

身份证号码：_________________________

签订时间：___________

签订地点：___________

乙方：_________________________

地址：_________________________

联系电话：_________________________

身份证号码：_________________________

签订时间：___________

签订地点：___________

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

国家正规农业技术转让协议

合同登记编号

项目名称：_______________________________________

受让人(甲方)：___________________________________

让与人(乙方)：___________________________________

签订地点：________省________市(县)

签订日期：____年____月____日

有效期限：____年____月____日至____年____月____日

依据《中华人民共和国民法典》的规定，合同双方就________(该项目属计划)转让，经协商一致，签订本合同。

一、非专利技术的内容、要求和工业化开发程度：

二、技术情报和资料及其提交期限、地点和方式：

乙方自合同生效之日起____天内，在______(地点)，以______方式，向甲方提供下列技术资料：

三、本项目技术秘密、范围和保密期限：

四、使用非专利技术的范围：

甲方：

乙方：

五、验收标准和方法：

甲方使用该项技术，试生产后，达到了本合同第一条所列技术指标，按______标准，采用______方式验收，由甲方出具技术项目验收证明。

六、经费及其支付方式：

(一)成交总额：______元。

其中技术交易额(技术使用费)：______元。

(二)支付方式(采用以下第____种方式)：

①一次总付：______元，时间：______

②分期支付：______元，时间：______

______元，时间：______

③按利润______%支付，期限：______

④按销售额______%支付，期限：______

⑤其他方式：________________________

七、违约金或者损失赔偿额的计算方法：

违反本合同约定，违约方应当按《中华人民共和国民法典》第三百五十一条、第三百五十二条规定承担违约责任。

(一)违反本合同第____条约定，____方应当承担违约责任，承担方式和违约金额如下：

(二)违反本合同第____条约定，____方应当承担违约责任，承担方式和违约金额如下：

八、技术指导的内容(含地点、方式及费用)：

九、后续改进的提供与分享：

本合同所称的后续改进，是指在本合同的有效期内，任何一方或者双方对合同标的的技术成果所作的革新和改进。双方约定，本合同标的的技术成果后续改进由____方完成，后续改进成果于____方。

十、争议的解决办法：

在合同履行过程中发生争议，双方应当协商解决，也可以请求________进行调解。

双方不愿协商、调解解决或者协商、调解不成的，双方商定，采用以下第____种方式解决。

(一)因本合同所发生的任何争议，申请________仲裁委员会仲裁；

(二)依法向人民法院起诉。

十一、名词和术语的解释：

十二、其他(含中介方的权利、义务、服务费及其支付方式、定金、财产抵押、担保等上述条款未尽事宜)：

填写说明

一、“合同登记编号”的填写方式：

合同登记编号为十四位，左起第一、二位为公历年代号，第三、四位为省、自治区、直辖市编码，第五、六位为地、市编码，第七、八位为合同登记点编号，第九至十四位为合同登记序号，以上编号不足位的补零，各地区编码按GB2260—84规定填写。(合同登记序号由各地区自行决定)

二、技术转让合同是指当事人就专利权转让、专利申请权转让、专利实施许可、非专利技术的转让所订立的合同。本合同书适用于非专利技术转让合同，专利权转让合同、专利申请权转让合同、专利实施许可合同采用专利技术合同本文书签订。

三、计划内项目应填写国务院部委、省、自治区、直辖市、计划单列市或地、市(县)级计划，不属于上述计划的项目此栏划(/)表示。

四、技术秘密的范围和保密期限：

是指各方承担技术保密义务的内容、保密的地域范围和保密的起止时间、泄漏技术秘密应承担的责任。

五、使用非专利技术的范围：

是指使用非专利技术的地域范围和具体方式。

六、其他：

合同如果是通过中介机构介绍签订的，应将中介合同作为本合同的附件。如双方当事人约定定金、财产抵押及担保的，应将给付定金、财产抵押及担保手续的复印件作为本合同的附件。

七、委托代理人签订本合同书时，应出具委托证书。

八、本合同书中，凡是当事人约定无需填写的条款，在该条款填写的空白处划(/)表示。

甲方：经办人：电话：

乙方：电话：

转让方（甲方）：身份证号码：受让方（乙方）：身份证号码：风险提示：

为了防止股东资格丧失的法律风险，受让方必须考察转让方股东资格的相关证明。在实践中，必须审查：公司章程、出资证明、股份证书、股票、股东名册以及注册登记、公司股权的转让协议、公司设立后的授权资本或者新增资本的认购协议、隐名投资者与显名投资者有关股权信托或代为持有的协议等，这些均可作为证明股东资格的证据。在不同的法律关系和事实情形下，各形式的证据可以发挥不同程度的证明力。如何查看和保存证据，请咨询专业律师。甲乙双方经过友好协商，就甲方持有的有限责任公司股权转让给乙方持有的相关事宜，达成如下协议，以资信守：

1、转让方（甲方）转让给受让方（乙方）有限公司的______%股权，受让方同意接受。

2、由甲方在本协议签署前办理或提供本次股权转让所需的原公司股东同意本次股权转让的决议等文件。

3、股权转让价格及支付方式、支付期限：转让价格：______________元；支付方式：_________________；支付期限：________年____月____日。

4、本协议生效且乙方按照本协议约定支付股权转让对价后即可获得股东身份。

5、乙方按照本协议约定支付股权转让对价后立即依法办理公司股东、股权、章程修改等相关变更登记手续，甲方应给与积极协助或配合，变更登记所需费用由乙方承担。风险提示：

由于股权转让过程长、事项繁杂，很多企业都没有及时办理工商变更登记手续，其隐藏的风险也是巨大的。律师提醒，在办完股权转让的同时，必须及时办好相应的工商变更登记手续，以防患未然。实践中，一方反悔的情况非常多，反悔出现的时间点也千差万别，所以要约定好各环节双方的义务。

6、受让方受让上述股权后，由新股东会对原公司成立时订立的章程、协议等有关文件进行相应修改和完善，并办理变更登记手续。

7、股权转让前及转让后公司的债权债务由公司依法承担，如果依法追及到股东承担赔偿责任或连带责任的，由新股东承担相应责任。转让方的个人债权债务的仍由其享有或承担。

8、股权转让后，受让方按其在公司股权比例享受股东权益并承担股东义务；转让方的股东身份及股东权益丧失。

9、违约责任：如协议一方不履行或严重违反本协议的任何条款，违约方须赔偿守约方的一切经济损失。除协议另有规定外，守约方亦有权要求解除本协议及向违约方索取赔偿守约方因此蒙受的一切经济损失。

10、本协议变更或解除：发生下列情况之一时，可变更或解除本协议，但甲乙双方需签订变更或解除协议书。

（1）由于不可抗力或由于一方当事人虽无过失但无法防止的外因，致使本协议无法履行。

（2）一方当事人丧失实际履约能力。

（3）由于一方违约，严重影响了另一方的经济利益，使合同履行成为不必要。

（4）因情况发生变化，当事人双方经过协商同意。

（5）合同中约定的其它变更或解除协议的情况出现。1

1、争议解决约定：甲乙双方因履行本协议所发生的或与本协议有关的一切争议，应当友好协商解决。如协商不成，任何一方均有权按下列第种方式解决：

（1）将争议提交______仲裁委员会仲裁，按照提交仲裁时该会现行有效的仲裁规则进行仲裁。仲裁裁决是终局的，对甲乙双方均有约束力。

（2）各自向所在地人民法院起诉。1

2、本协议正本一式____份，立约人各执____份，公司存档____份，报工商机关备案登记_____份。1

3、本协议自将以双方签字之日起生效。甲方：________年____月____日乙方：________年____月____日

转让方(甲方)：_____________

身份证号：_________________

受让方(乙方)：_____________

身份证号：_________________

甲、乙双方经友好协商，就幼儿园转让事宜达成以下协议：

第一条：转让标的

经(房东)同意甲方将自己位于____________________的幼儿园(转让给乙方使用，建筑面积为平方米。(详见附件一)

第二条：承租权的变更

该幼儿园的所有权证号码为____________，产权人为____________。(房东)与甲方签订了租赁合同，租期到____年____月____日止，租期为____年，年租为________元人民币，现甲方已缴纳10年房租，本协议生效后15日内，甲方应当协助乙方与房主达成协议，并保证乙方同等享有甲方在原有房屋租赁合同中所享有的权利与义务。如乙方未能与房主达成协议，本协议无效。

第三条：附属设施的归属

幼儿园现有装修、装饰、设备(详见附件三)在甲方收到乙方转让金后全部无偿归乙方使用，租赁期满后不动产归房主所有，动产无偿归乙方(动产与不动产的划分按租赁合同执行)。

第四条：转让补偿金

乙方在________年____月____日前一次性向甲方支付顶手费(转让费)共计人民币大写元，上述费用已包括甲方交给房主预交10年房租的剩余部分、第三条所述的装修装饰设备及其他相关费用。甲方不得再向乙方索取任何其他费用.

第五条：相关证照的办理和续展及债权债务的承担

该幼儿园已由甲方办理相应许可证，为县级一类幼儿园，甲方保证向乙方提供的幼儿园的一切信息的真实性。租期内甲方继续以(你的名义，或者甲方的名义)名义办理许可证、税务登记等相关手续，但相关费用及由乙方经营引起的债权债务全部由乙方负责，与甲方无关。乙方接手经营前该幼儿园及许可证上所载企业所欠一切债务由甲方负责偿还，与乙方无关。

第六条：已入托幼儿的服务

乙方应保证达到甲方向已入托的名儿童的一切服务承诺。妥善处理好因经营权变更所带来的相应问题，如所产生的问题发生在本协议生效前，甲方应承担由此产生的相关费用。

第七条：员工

幼儿园原有员工除乙方同意接收留用的之外，由甲方负责安置补偿。

第八条：不可抗力

如因自然灾害等不可抗因素导致乙方经营受损的与甲方无关。

第九条：保密责任

任何一方对因幼儿园转让而获知的另一方的商业机密负有保密义务，如使用教材、教学方法、招生规定及价格等不得向有关其他第三方泄露，但中国现行法律、法规另有规定的或经另一方书面同意的除外。

第十条：违约责任

(这条你可以根据实际情况，对逾期支付转让金、逾期没有与房主达成协议的相关违约责任自行设立。)

第十一条：争议的解决

11.1未尽事宜，双方应本着互谅互让、诚实信用的原则进行友好协商，并签订书面的补充协议，补充协议与本协议有同等法律效力。

11.2如协商不成，任何一方可向有管辖权的人民法院(建议写一个你人头比较熟的法院)提起诉讼。

第十二条：协议的生效

本协议一式2份，甲、乙各持一份，自双方签字之日起生效。

附件：

一、幼儿园建筑图

二、原房屋租赁合同

三、甲方转让给乙方的一切设施清单

甲方：____________乙方：____________

设立股份有限公司出资合同

合同编号：____________

甲方：________________________

法定住址：____________________

法定代表人：__________________

职务：________________________

委托代理人：__________________

身份证号码：__________________

通讯地址：____________________

邮政编码：____________________

联系人：______________________

电话：________________________

传真：________________________

帐号：________________________

电子信箱：____________________

乙方：________________________

法定住址：____________________

法定代表人：__________________

职务：________________________

委托代理人：__________________

身份证号码：__________________

通讯地址：____________________

邮政编码：____________________

联系人：______________________

电话：________________________

传真：________________________

帐号：________________________

电子信箱：____________________

丙方：________________________

法定住址：____________________

法定代表人：__________________

职务：________________________

委托代理人：__________________

身份证号码：__________________

通讯地址：____________________

邮政编码：____________________

联系人：______________________

电话：________________________

电挂：________________________

传真：________________________

帐号：________________________

电子信箱：____________________

遵照《中华人民共和国公司法》和其他有关法律、法规，根据平等互利的原则，经甲乙丙各发起人友好协商，决定设立“_________股份有限公司”（以下简称公司），特签订本协议书。

第一条 公司概况

1.申请设立的有限责任公司名称拟定为“_________股份有限公司”，并有不同字号的备选名称若干，公司名称以公司登记机关核准的为准。

2.公司住所拟设在_________市_________区_________路_________号_________楼（房）。

3.本公司的组织形式为：股份有限公司。公司具有独立的法人资格。

4.责任承担：本公司采取募集设立方式，各股东以其所认购股份为限对公司承担有限责任，公司以其全部资产对公司债务承担责任。

第二条 公司宗旨与经营范围

本公司的经营宗旨为：________________________________________。

本公司的经营范围为：主营_______________，兼营_______________。

第三条 股权结构

1.公司采取募集设立方式，募集的对象为法人、社会公众。

2.公司发起人认购的股份占股份总额的_________％，其余股份向社会公开募集。

3.公司股东以登记注册时的认股人为准。

4.公司全部资本为人民币_________元。

5.公司的全部资本分为等额股份。公司股份以股票形式出现，股票是公司签发的有价证券。股份公司成立后拟在国内二级市场发行约_________万股，具体数额届时由股东大会决议确定。

共5页，当前第1页12345

合同编号:__________

发包方:__________

分包方:__________

无损检测技术服务合同

发包方: __________(以下简称甲方)

分包方:__________ (以下简称乙方)

根据《中华人民共和国民法典》、《建筑安装工程承包合同条款》和城乡建设部《建筑安装工程分包实施办法》及有关规定，参照GF-91-0201《建设工程施工合同示范文本》，结合分包工程的具体情况，经双方协商一致，签订本合同，以资共同遵守。

第一条 工程概况

一、 工程名称：工艺管道无损检测工程

二、 工程地点：广东省江门市新会区

三、 工程范围：工艺管道无损检测工程

四、 工程期限：预定20__年1月至20__年2月(按照实际工程进度)。

第二条 合同总价、承包方式和结算

一、 分包工程暂定总价20000.00元，最终结算金额根据实际工程量及合同单价结算。

二、 分包工程的承包方式：包工包料。

三、 分包工程价款结算方式：

1.结算单价：

序号收费项目规格计价单位综合单价(元)

2、X射线检测 张

3、每次台班费 趟

4、说明：每趟检测最低收费20__元，即：每趟检测时按照单价及实际工程量计算，合价

低于20__元时收费20__元，超过20__元时按照合同单价及实际工程量计算。

5、以上结算价格均已包含各种税金，提供增值税普通发票，税率6%。

6、工程进展中需要其他检测方法或项目时，结算单价双方另行商议。

7、乙方应按发生的实际有效探伤数量交甲方办理现场签证，并以此为结算依据，由于乙方原因造成无损探伤失效、报废等，其全部损失由乙方承担，由于甲方原因造成无效探伤时，甲方应按结算单价支付乙方检测费用。

8、工程全部完工后，乙方一次性收到全部检测费用后提供正式检测报告一式两份。

9、检测费用应支付到本合同约定账户。

第三条 双方责任

一、 甲方责任：

1、 全面负责工程进度、工程质量、施工技术等管理工作;

2、 根据有关施工规范及设计要求，编制有关无损检测技术要求;

3、 统一领取工程技术文件和施工图纸，按时供给乙方;

4、 严格按照有关要求及图纸，书面委托、现场点口并用白色油漆笔做好唯一标识，确保图纸焊口编号、检测委托、底片及检测报告完全吻合，不弄虚作假;

5、 通过委托形式已经检测过的焊口不再重新变更焊口检测，如果确实需要变更的，则应签证计算原先检测过的底片数量以及变更后的焊口底片数量;

6、 甲方委派工程管理员为无损检测专责工程师，专门负责甲乙双方的协调工作;

7、 按照合同要求及时支付工程款项。

二、 乙方责任：

1、 严格遵守甲方各项规章制度，积极配合甲方施工，确保进度，服从甲方指挥和监督，严格按有关标准和规范施工;并应符合《承压设备无损检测》JB/T47013.2-20__的要求，具体如下表：

JB/T47013.2-20__AB级检测一次透照次数一览表

序号管径透照方法拍片张数周长一次透照胶片规格备注

1Ф530双壁单影101664.2 240×80

2Ф508双壁单影10 240×80

3Ф480双壁单影101507.2 240×80

4Ф426双壁单影81337.6 240×80

5Ф406双壁单影8 240×80

6Ф377双壁单影81184 240×80

7Ф325双壁单影81020.5 150×80

8Ф273双壁单影7857.2 150×80

9Ф219双壁单影6688 150×80

10Ф159双壁单影6499.3 150×80

11Ф133双壁单影6418 150×80

12Ф108双壁单影6339 150×80

13Ф89及以椭圆成像2 150×80

14Ф89及以垂直透照3 150×80

如有特殊情况需要增加拍片张数，需三方(甲方、乙方、监理)确认后再实施。

2、 做好施工原始记录，竣工后向甲方提交一式二份完整的检测报告,底片一式一份;

3、 乙方对探伤检测结果要承担技术责任，负责向甲方有关技术人员、技术部门解释并接受监督;

4、 乙方接到甲方作业通知后12小时内必须回应，接受委托后在甲方规定的工期内完成，并及时向甲方反馈检测结果;

5、 乙方在施工期间由自身所造成的任何安全事故及由此造成的损失由乙方承担;

6、 乙方应严格按射线检验安全操作规程进行操作，做好防护工作;

7、 严禁弄虚作假行为，对检测结果的真实性、有效性、准确性负责;

8、 及时向甲方提供承包工程的计划、统计、技术、质量等有关资料;

9、 及时办理工程签证及结算工作;

10、乙方委派_x001f_ 同志为现场代表，负责该项目全面工作。

第四条 工程质量和检查验收

一、双方必须严格按照施工图纸和要求及有关规范、规程，精心组织施工，保证工程质量。已经检测过的焊口必须达到全部合格，质量优良。

二、隐蔽工程甲方应提前48小时书面通知乙方负责人，并通知建设单位现场负责人到现场检查验收，验收合格后方可隐蔽。

三、工程竣工后，乙方按甲方要求整理检测报告一式二份，并书面发出竣工通知书，由甲方组织验收。分包工程竣工验收达到合格后，由甲乙双方在验收书上签字，作为乙方向甲方交工的证件。

四、工程验收合格后，乙方方可撤离。

第五条 安全、文明施工

一、甲方对乙方分包的工程必须提出明确的安全要求，并进行监督检查。

二、乙方必须认真贯彻各种安全施工的规章制度，认真执行甲方《外来施工单位安全管理制度》,严格遵守安全操作规程，施工中如因违反上述规定而发生的伤亡事故，其责任由乙方自负。其他事故，分清责任，由责任方负责。

三、严格执行建设单位及甲方的各项安全制度规定。

四、分包工程范围的区域保卫工作由甲方负责。

五、乙方施工人员要遵守国家的法律、法规，严格遵守甲方的各种规章制度，做到文明施工，工完料净，保持现场整洁。如违反现场管理制度和有不法行为，甲方有权采取必要措施，乙方应承担法律责任，并负责赔偿经济损失。

第六条 违约责任

一、乙方分包的工程项目，不得再行分包和转包，否则甲方有权终止合同

二、合同签订后，除合同有规定以外，不经双方协商同意，任何一方不得随意变更或解除。如乙方不经甲方同意，单方解除合同时，应由乙方赔偿甲方因影响施工计划安排造成的经济损失;如甲方中途解除合同，应赔偿乙方因此造成的经济损失。

三、由于乙方的原因，使工程逾期竣工，每逾期一天，乙方应偿付给甲方按承包工程总价1‰的违约金。

四、由于甲方原因不能按时支付工程款项的，每逾期一天，甲方应偿付给乙方按分包工程总价1‰的违约金。

第七条 附则

一、本合同履行过程中发生争执时，甲乙双方首先应积极协商解决，协商不成时，可按下列方式解决：

1、提请南宁市仲裁委员会仲裁;

2、向南宁市人民法院提起诉讼。

二、合同签订后，如具备条件，乙方必须在甲方规定的时间内完成编制施工技术方案，并送甲方审核。

三、合同未尽事宜，双方协商解决。

第九条 合同书及附件

一、本合同正本壹式二份，甲乙方各壹份。

二、本合同经双方签字盖章后生效，分包工程竣工验收合格、结清工程款、保修期满后自动失效。

三、合同附件是本合同的组成部分，与合同具有同等的法律效力。

发 包 方： 分 包 方：南宁特标检测科技有限公司

法人授权代表：_______ 法人授权代表：_______

经办人：_______ 经办人：_______

开户行：__________ 开户行：__________

账号：__________ 账号：__________

合同签订日期：__________

合同签订地点：__________

甲方：___________餐饮管理有限公司

法人代表：

乙方：

身份证号：

住址：

为提高员工的基本素质及专业的服务技能，甲方已于________年____月____日支付专项培训费用请高级专业技术培训人员为乙方进行了为其____月的专业技术综合培训。

基于上述事实，为明确培训结束后甲、乙双方的责任义务，甲乙双方在平等互惠、协商一致的基础上确认如下条款：

第一条：培训服务事项

甲方根据企业发展的需要，出资送乙方参加培训，乙方参加培训结束后，回到甲方单位按照甲方安排的岗位工作服务。

第二条：培训时间与方式

(一)培训时间：________年____月____日至________年____月____日;

(二)培训方式：

第三条：培训项目与内容：

________岗位技术培训项目。

培训内容为：

________

第四条：培训要求

乙方在培训结束时，达到下列要求：

取得培训机构颁发的合格证、相关证书等;

乙方受训后获得的相关资格证书由培训机构直接交甲方，由甲方代为保管,待乙方协议服务满年限后交付乙方。

因其他原因乙方控制该证书、合格证的，应在培训结束后________日交乙方保管，否则视为严重违反单位规章制度的行为。

第五条：培训费用

(一)费用项目及标准

1、培训期内甲方已经为乙方支付的培训费用项目包括：培训费、工资、往返交通费(先由乙方垫付，培训结束在餐厅工作满3个月凭车票由甲方全额支付)、住宿费。

按甲方与培训单位约定伙食由培训单位免费提供。

上述费用已经从甲方的员工专项培训经费列支。

2、费用支付标准：

(1)培训费：________元;

(2)工资：________元/月;

合计________元;

(3)交通费：________元;

(不含培训期市内交通费)

(4)住宿费：________元;

甲方总计支付乙方培训费用(以上1-4项)总计：________元。

第六条：甲方责任与义务

1、为乙方提供工作条件;

2、为乙方向其他员工传授技能创造条件;

第七条：乙方责任与义务

1、按照培训的时间、地点、内容认真参加培训。

受训期间虚心学习，吸收所需知识技能，保证完成培训目标和学习任务，取得相关学习证件证明材料。

2、培训完毕后应尽所学之经验、知识、技能服务于公司，并应将所学传授给甲方公司同仁。

乙方怠于履行该义务或履行义务不尽力的，视为严重违反单位的规章制度。

因培训所取得的相关资料留由甲方存档，属甲方所有。

乙方应在培训结束后_____日交给甲方，否则视为严重违反单位规章制度的行为。

乙方利用所学取得的科研成果、专利、著作应以甲方名义取得知识产权，乙方不得向外出售、泄漏、转让该知识产权涉及的商业、技术秘密。

如有泄漏甲方商业、技术秘密者，在承担经济损失的同时，愿承担法律责任。

3、培训结束后回到甲方参加工作，服从甲方分配，服务期限达到____年以上。

第八条：违约责任

发生下列情况时，乙方承担的经济责任：

1、如在培训期间自行提出中止培训，向甲方赔偿甲方总计支付乙方培训费用的____倍罚款，总计____元。

2、在培训结束时，未能完成培训目标任务，未取得相应证书证明材料，乙方向甲方赔偿全部培训成本费用(全部培训成本费用包括甲方出资全部培训费用和因乙方参加培训不能为甲方提供服务所损失的机会成本);

总计____元

3、在培训期内违反了甲方和培训单位的管理和规定，按甲方和培训单位奖惩规定执行;

4、在培训期内损坏甲方形象和利益，造成了一定经济损失，乙方补偿甲方全部经济损失;

5、培训期结束后回到甲方工作后(自受训结束之日起计算)，非因不可抗因素导致乙方不能履行协议时，乙方在甲方工作未达到协议约定的工作年限(即至________年____月____日)，乙方按照下列标准进行赔偿后，甲方可以同意其服务期内的辞职请求：如____月内辞职应向应甲方交纳公司负担培训费用100%;

如____月内辞职应向应甲方交纳公司负担培训费用70%;

如____月内辞职应向应甲方交纳公司负担培训费用50%;

如____月内辞职应向应甲方交纳公司负担培训费用30%;

____月后则可免交培训费用。

乙方辞职未获批准后擅自离开单位、请假到期不按时上班被视为擅自离职、

乙方擅自离职、乙方因民法典第39条的情形存在被甲方解除合同的，乙方也应按照本款上述的规定进行赔偿。

第九条：法律效力

本协议经双方签字，具有法律效力。

第十条：附则

(一)未尽事宜双方可另作约定

(二)当双方发生争议不能协商处理时，由当地劳动仲裁部门或人民法院处理;

(三)本协议一式二份，甲、乙双方各执一份。

(四)甲方公司的培训制度作为本合同的组成部分，与本合同具有同等效力。

甲方的规章制度与本合同冲突的，按照本合同处理;

本合同未约定的地方，按照规章制度处理。

第十二条：说明

签订本合同前，乙方经甲方提示，已经充分的阅读了该协议，知悉签订本协议的法律后果，协议中的内容，应乙方要求，甲方已经做了解释与说明。

甲乙双方签订本合同是自愿的无欺诈、胁迫等导致意思不实的情况存在。

甲方：

法人代表(授权代理人)：

签字日期：

乙方：

签字日期：

2022国际专利技术许可合同

国、 市， 公司(以下简称“受让方”)为一方， 国 市 公司(以下简称“出让方”)为另一方;

鉴于出让方是 技术的专利权持有者;

鉴于出让方有权，并且也同意将 专利技术的使用权、制造权和产品的销售权授予受让方;

鉴于受让方希望利用出让方的专利技术制造和销售产品;

双方授权代表通过友好协商，同意就以下条款签订本合同。

第一条定义

1.“专利技术”是指本合同附件一中所列的技术，该技术已于 年 月 日经中国专利局批准，获得了专利权，其专利编号为 .

2.“出让方”是指 国 市 公司，或者该公司的法人代表、代理和财产继承者。

3.“受让方”是指 国 公司，或者该公司的法人代表、代理和财产继承者。

4.“合同产品”是指合同附件二中所列的产品。

5.“合同工厂”是指生产合同产品的工厂，该工厂在 省 市，名称 工厂。

6.“净销售价”是指合同产品的销售发票价格扣除包装费、运输费、保险费、佣金、商业折扣、税费、外购件等费用后的余额。

7.“专利资料”是指本合同附件一中所列的有关资料。

8.“合同生效日”是指本合同双方有关当局的最后一方的批准日期。

第二条合同范围

1.受让方同意从出让方取得，出让方同意向受让方授予合同产品的设计、制造和销售的权利。产品的名称、型号、规格和技术参数详见本合同附件二。

2.出让方授予受让方在 国设计制造合同产品、使用、销售和出口合同产品的许可权，这种权利是非独占性的，是不可转让的权利。

3.出让方负责向受让方提供合同产品的专利资料，包括专利的名称、内容、申请情况和专利编号等，具体的资料详见本合同附件一。

4.在合同的执行中，如果受让方需要出让方提供技术服务或一部分生产所需的零部件或原材料时，出让方有义务以最优惠的价格向受让方提供，届时双方另行协商签订合同。

5.出让方同意受让方使用其商标的权利，在合同产品上可以采用双方的联合商标或者标明“根据出让方的许可制造”的字样。

第三条合同价格

1.按照第二条规定的内容和范围，本合同采用提成方式计算价格，计价的货币为美元。

2.本合同提成费的计算时间从合同生效之日后的第 个月开始，按日历年度计算，每年的12月31日为提成费的结算日。

3.提成费按当年度合同产品的销售后的净销售价格计算，提成率为 %，合同产品未销售出去的不应计算提成费。

4.在提成费结算日后10天之内受让方应以书面通知的形式向出让方提交上一年度合同产品的销售数量、净销售额和应支付的提成费，净销售额和提成费的具体计算方法详见本合同附件三。

5.出让方如需查核受让方的帐目时，应在接到受让方根据第

3、4款规定开出的书面通知后10天之内通知受让方，具体的查帐内容和程序详见本合同附件四。

第四条支付条件

1.本合同第三条中规定的提成费，受让方将通过 银行(此处为受让方的业务银行)和 银行(此处为出让方的业务银行)支付给出让方，支付中使用的货币为美元。

2.出让方在收到受让方按第三条第3、4款的规定发出的书面通知后应立即开具有关的单据，受让方在收到出让方出具的下列单据后30天内，经审核无误，即支付提成费给出让方：

a、提成费计算单一式四份;

b、商业发票一式四份;

c、即期汇票一式二份。

3.按本合同规定，如出让方需要向受让方支付罚款或赔偿时，受让方有权从上述支付中直接扣除。

第五条资料的交付和改进

1.出让方应按本合同附件二的规定向受让方提供专利资料的名称、内容，以及出让方向 专利局申请专利的有关情况。

2.出让方应在签订合同的同时，将第五条第1项中规定的专利资料交付给受让方。

(注：由于专利资料都是现成的，因此要求出让方要签约时提交。)

3.在合同有效期内，双方对合同产品涉及的技术如有改进和发展，应相互免费将改进和发展的技术资料提供给对方使用。

4.改进和发展技术，其所有权属于改进和发展一方，另一方不得利用这些技术资料去申请专利和转让给第三方。

第六条侵权和保证

1.出让方保证是本合同一切专利技术和专利资料的合法持有者，并且有权向受让方转让，如果在合同执行过程中一旦发生第三方指控侵权时，则由出让方负责与第三方交涉，并承担由此引起的一切法律和经济上的责任。

2.出让方保证本合同中涉及的专利在合同执行期间是有效的和合法的。

如果由于出让方的原因导致专利提前失效时，出让方应将专利失效后受让方支付的费用偿付给受让方，并按 %的年息加计利息，与本金一起偿付给受让方。

3.在合同有效期间，出让方应按照受让方所在国专利局的有关规定按时缴纳专利维持费，以保持专利的有效性。

4.在合同执行期间，如果本合同涉及的专利的法律性质发生了变化，出让方应立即将此情况以书面形式告之受让方，然后双方再协商本合同的执行问题。

第七条税费

1. 国政府根据其现行税法征收受让方有关执行本合同的一切税费由受让方负担。

2. 国政府根据其现行税法征收出让方与执行本合同有关的一切税费由出让方负担。

第八条争议的解决

1.因执行本合同所发生的或与本合同有关的一切争议，双方应通过友好协商解决。

2.如双方通过协商不能达成协议时，则应提交 国的仲裁机构或 国的有关法院解决。

如果是诉诸仲裁，则由 国 仲裁委员会按该会的仲裁程序暂行规则进行仲裁;如果是通过诉讼，则由受让方所在地的法院根据该国的有关法律进行审理。

3.仲裁裁决或法院的判决是终局决定，对双方均有约束力。

4.仲裁费或诉讼费由败诉方负担。

5.在争议的处理过程中，除正在进行仲裁或诉讼的部分外，合同的其他部分将继续执行。

第九条合同生效和其他

1.本合同由双方授权代表 年 月 日在 签字。

各方应分别向其有关当局申请批准，以最后一方的批准日期为本合同的生效日期。

双方应尽最大努力争取在90天内获得合同的批准，然后用电传通知对方，并用信件确认。

2.本合同自签字之日起6个月如仍不能生效，双方均有权取消合同，一旦本合同被取消，受让方应将第五条中规定的专利资料退还给出让方。

3.本合同的有效期从合同生效日算起共 年，有效斯满后本合同自动失效。

4.本合同失效后，如果合同中涉及的专利仍然有效时，受让方不得继续使用此专利，如需继续使用，则应与出让方续签合同;本合同失效后，如果合同中涉及的专利也随之失效时，受让方可以继续使用此专利而不需要向出让方支付任何费用。

5.本合同期满时，双方发出的未了债权和债务不受合同期满的影响，应继续履行各自的责任。

6.在合同执行中，对其条款的任何变更、修改和增减，都须经双方协商同意并签署书面文件，作为合同的组成部分，与合同具有同等效力。

7.本合同由第一条至第九条和附件一至附件四组成，合同的正文和附件是不可分割的部分，具有同等法律效力。

8.本合同用英文书就，双方各持两份。

在合同有效期内，双方通过以英文进行，正式通知应以书面形式，航空挂号邮寄，一式两份。双方的法定地址如下：

受让方：

地址： 邮码： 电话：

电传：

代表(签字)：

年 月 日

出让方 公司

地址： 邮码： 电话：

电传：

代表(签字)：

年 月 日

信息技术咨询服务合同

技术咨询合同在技术领域内具有自己特定的调整对象，即合同当事人在完成一定的技术项目的可行性论证、技术预测、专题技术调查、分析评价报告等科学研究活动中产生的民事法律关系。

下面是小编整理的信息技术咨询服务合同，希望能给大家带来帮助!

甲方：

乙方：

根据《合同法》等有关法律、法规的规定，就乙方为甲方提供教育信息咨询事宜，双方在平等互惠、协商一致的基础上达成如下条款，以共同遵守。

一、服务项目

甲方为乙方提供就下列项目的教育信息咨询服务：对公司的员工进行教育分析、学习规划、择校问题及高效率完成得出诊结论分析，指出解决路向并为其提供相关的教育信息咨询服务。

二、项目完成期限及收费

1、以上服务项目收费标准为人民币31800元于签约后一次性支付。

2、甲方应在本合同生效日壹周内开始实施教育信息咨询服务，并在壹年内完成所有的咨询服务。

三、甲方乙方的基本义务

(一)乙方的基本义务

1、与甲方诚信合作，为甲方开展工作提供便利，向甲方提供与服务事项相关的情况和资料。

2、如有关的情况和事实发生变化，应及时告知甲方。

3、按照约定支付服务费。

4、向甲方提出的要求不应与法律及会计职业道德和职业纪律规定相冲突。

(二)甲方的基本义务

1、必须遵守职业道德和执业纪律。

2、应当勤勉尽职，依法在合同约定范围内维护乙方的最大利益。

3、应当及时向乙方发表顾问意见;按时完成提交项目报告。

4、对乙方的商业秘密或个人隐私应当保守秘密。

四、生效、违约处理及其他约定事项

1、本合同在签约并成功付费后生效。

2、双方之间发生争议的，应当进行协商或由第三方调解。

3、本合同未尽事宜，甲乙双方应持积极态度友好协商解决。

4、本合同一式贰份，甲乙双方各执壹份，效力相同。

甲方(盖章)：乙方(盖章)：

年月日年月日

甲方：__________________

乙方：__________________，入职时间：____________，性别：______，出生年月：____________，学历：____________，所属部门：____________，身份证号码：____________，联系方式：____________。

为提高乙方的基本素质及职业技能，甲方鼓励并支持乙方参加职业培训。为确保乙方圆满完成培训学业，并按时返回甲方工作，经甲乙双方协商，订立如下协议:

1、甲方同意乙方赴____________学习___________课程， 学习期自_________年_________月_________日起至_________年_________月_________日，实计为期____________。

2、乙方应在甲方指定或与甲方约定的学校及课程学习。如需要变更，应事先通知甲方，并得到甲方的批准，否则以旷工论处。

3、乙方在学习期间，计入在职员工，按连续工龄累计，享有国家规定的在职员工所有合法权益。

4、学习培训期间的工资视情况按原工资办法的____________支付。在晋级或工资办法修订时，乙方作为在编人员处理。社会保险原则上按有关规定作为在编人员处理。若在培训学习期间，乙方接受甲方交付的调查或安排出差，差旅费按公司规定的标准支付。

5、乙方学习期间患有不能继续学业的疾病时，应接受甲方指令，终止学习，返回甲方，待身体康复后继续参加相关培训课程。

6、乙方在学习期间，必须每隔____________天向甲方书面报告一次学习情况，并附学校考勤、成绩单等方面的记录。

7、乙方应自觉遵守培训校方的各项规定与要求。凡因违规违纪而受到校方处分的，视同在甲方内的违纪，甲方将按规章制度处理。

8、乙方在培训学习期间的学费、书费、调研费、实习费、考试费、住宿费、来回往返甲方的交通费(需有事招回)并入培训费用，乙方考试合格后，由甲方全额报销。

9、乙方如在培训学习期间辞职，应向甲方支付由甲方缴纳的全部培训学习费用的双倍的违约金，不足____________元的按____________元计算。

10、培训学习结束后，乙方应为甲方继续服务____________年，从培训结束之日起算。该服务期约定视作劳动合同期限。在服务期内，乙方以任何理由解除劳动合同的，乙方应赔偿甲方培训费用，具体支付方法是:按服务期限等分培训费，以乙方已履行的合同期限递减支付，服务期限不足-年的按实际月份计算。服务期满解除的可免交培训费用;因严重违反规章制度被甲方解除劳动合同的，亦照此办理。

11、在服务期内乙方以任何理由违反服务期约定解除劳动合同的，乙方应支付甲方违约金___________元; 因严重违反规章制度被甲方解除劳动合同的，亦照此办理。

12、培训学习结束后，乙方应于培训结束之日起____________日内向甲方报到。乙方逾期不向甲方报到，视作乙方解除劳动合同，按本协议第____________条、第____________条处理。

13、乙方在学习期间成绩优异，有杰出表现，甲方将视情况给予口头奖励。

14、甲、乙双方在履行本合同时，如发生争议应本着协商的原则解决，协商不成任何一方均可向劳动争议仲裁部门]提起仲裁或向人民法院提起诉讼。

15、本合同作为劳动合同的一部分，与劳动合同具有同等法律效力。

16、本协议一式两份，甲、乙双方各执一份，双方签字盖章生效。

甲方签章：__________________

乙方签章：__________________

_________年_________月_________日

_________年_________月_________日

转让方(个人)(以下简称甲方)

身份证号码：

姓名：

受让方(个人)(以下简称乙方)

身份证号码：

姓名：

甲方系_______广场店股东，出资额为_______元整(_______万元)，占公司总股份的100%(以下简称合同股份)，甲方自愿将其经营的_______广场店30%的股权转让给乙方，乙方愿意受让。

现甲、乙双方根据《中华人民共和国公司法》和《中华人民共和国民法典》的规定，经协商一致，就转让股权事宜，达成如下协议：

一、合同股份的转让及价格

甲方同意将合同股份转让给乙方。

乙方承诺以现金受让合同股份。

经甲、乙双方协商，合同股份100%股份，股份收购总价款为_______万元整(_______万元)，现甲方将其占_______广场店30%的股权以_______万元整_______万元)转让乙方。

二、付款期限

自本合同签署之日起，于_______年_______月_______日之前，乙方向甲方一次性支付股份转让款。

三、交割期

甲、乙双确定，本合同自签署之日起日内为交割期。

在交割期内，双方依据本合同及有关法律法规的规定办理合同股份过户手续。

四、甲方保证对其拟转让给乙方的股权拥有完全处理权，保证该股权没有设定质押，保证股权未被查封，并免遭第三人追索，否则甲方应当承担由此引起的一切经济和法律责任。

五、有关合营盈亏(含债券债务)的分担

1、本协议生效后，乙方按受让股权的比例分享利润，分担相应的风险和亏损。

2、如因甲方在签订本协议书时未如实告知乙方有关合营公司在股权转让前所负债务，致使乙方在成为合营股东后遭受损失的，乙方有权向甲方追偿。

六、生效

本合同自双方签字盖章并经_______广场店股东会出具股权出资证明通过。

七、违约责任

一方违约，致使本合同不能履行，应当向守约方支付合同总价款10%的违约金。

八、争议的解决

由本合同引起的或与本合同有关的任何争议，由双方协商解决，无法协商解决时，提交企业所在地有管辖权的人民法院依法裁决。

九、本协议一式四份，甲、乙双方方各执二份。

转让方(甲方)：_______

受让方(乙方)：_______

_______年_______月_______日

技术转让合同范本

第九章 保证

9.1 乙方保证其提供的技术资料是在合同生效时乙方使用的最新技术资料，并与乙方拥有的技术资料完全一致。在合同期间，“合同产品”设计变化的技术通知书和技术改进、发展资料，乙方将及时地送至甲方。

9.2 乙方保证其提供的技术资料是完整的、清晰的、可靠的，并按第五章的规定按时交付。有关定义如下：

9.2.1 “完整”系指乙方提供的资料是本合同附件中规定的全部资料，并与乙方自己工厂目前使用的资料完全一致。

9.2.2 “可靠”系指甲方按技术资料制造的合同产品应符合乙方按本合同提供的合同产品技术规范。

9.2.3 “清晰”系指资料中的图样、曲线、术语符号等容易看清。

9.3 如果乙方提供的技术资料不符合9.2条的规定时，乙方必须在收到甲方书面通知书后＿＿＿＿天内免费将所缺的资料，或清晰、可靠的资料寄给甲方。

9.4 当乙方不能按本合同第五章或9.3条规定的时间交付资料，则乙方应按下列比例向甲方支付罚款； 迟交＿＿＿＿至＿＿＿＿周，每整周罚款为入门费总价的＿＿＿＿％。 迟交＿＿＿＿至＿＿＿＿周，每整周罚款为入门费总价的＿＿＿＿％。 迟交超过＿＿＿＿周以上，每整，周罚款为入门费总价的＿＿＿＿％。 9.5 若发生9.4条事项，乙方支付给甲方的罚款总数不超过＿＿＿＿美 元（大写：＿＿＿＿美元）。 9.6 乙方支付给甲方的9.4条中规定的罚款，应以迟交的整周数进行计算。

9.7 乙方支付给甲方的罚款后，并不解除乙方继续交付上述资料的义务。

9.8 按第七章的规定，由于乙方的责任，产品考核经三次不合格时，则按以下办法处理： 9.8.1 若考核产品不合格以致甲方不能投产，则修改合同，采取有效措施将不合格的产品从合同中删除。乙方应退还甲方已经支付的那部分金额。这部分退还金额仅限于合同产品总的范围中不合格产品所占部分。并加年利＿＿＿＿％的利息。

9.8.2 如果根据9.8.1条修改合同，则甲方放弃只涉及不合格的那部分产品和零件的制造权，甲方将退回有助于制造这些不合格产品的全部文件，不可复制或销毁。 第十章 许可证和专有技术

10.1 乙方唯自己是根据本合同规定向甲方提供许可证和专有技术的合法者，并能够合法地向甲方转让上述许可证和专有技术而无任何第三者的指控。 如果第三方提出侵权的控诉，则乙方应与第三方处理此控诉并负责法律和经济责任。

10.2 与本合同有关的完整的＿＿＿＿国专利清单列入附件二，本合同生效一个月内，乙方将向甲方提供专利影印本一式二份。但不给予＿＿＿＿国专利许可证或不应包括此许可证。

10.3 本合同终止后，甲方仍有权使用乙方提供的许可证和专有技术，而不承担任何义务和责任。合同终止后，使用＿＿＿＿商标的权利也将终止。

10.4 双方都应履行本合同，不应以任何方式向任何第三方透露和公布双方提供的任何技术资料或商业情报。

共7页，当前第5页1234567

甲方： 乙方： 根据《中华人民共和国民法典》及其他相关法律法规的规定，就以下指定土地使用权的受让事宜，为明确甲乙双方的权利义务关系，在平等、自愿的基础上，经双方协商一致，订立以下条款，以资双方共同遵守。

第一条 指定土地概况 土地座落： 国有土地使用权证编号为： 土地面积： ㎡。

第二条 委托事项 甲方在实地考察土地并接受土地证相关参数后，就上述土地使用权的受让事宜，乙方接受甲方的委托，为其提供居间服务，并协助甲方完成对该土地使用权的受让。

第三条 甲、乙双方的权利义务及居间费用事宜

1. 在上述土地使用权的受让过程中，乙方协助甲方做好土地使用权转让合同的签订、转让款的支付、土地使用权属变更登记等事项。

2.土地使用权转让依法应履行的审批手续等各项事宜，由买卖双方各自完成，与乙方无关;依法应缴纳的各种税费，由买卖双方根据国家有关规定各自缴纳，与乙方无关。

3. 在签订买卖双方土地交易合同当日，甲方有义务按约定的标准及方式向乙方支付居间服务费;乙方有权按该标准及方式收取居间服务费。

4.支付方式：在签订买卖双方土地交易合同当日，甲方将乙方应收取的上述居间服务费人民币 元(大写： 整)无条件划付到乙方指定的专用银行帐户(开户行： ;账号： ;开户姓名： )。

5.履行本协议所支出的各项合理费用，由甲、乙双方自行承担。

第四条 违约责任 若甲方未履行本协议

第三条第3款和第4款的约定，因此给乙方造成损失的，甲方应赔偿乙方所有损失。

第五条 其他事宜

1.上述土地使用权的转让是否具备法定转让条件，以及因此而可能产生的法律风险，依法应由甲方自行评估、认定及承担，与乙方无关。

2.对于土地使用权转让合同的履行情况、违约责任等，除货款的支付及土地使用权属变更登记事项外，与乙方无关，应由该合同的双方当事人各自承担相关法律责任。 若因不可归责于乙方的事由，致使不能按照转让合同约定办理土地使用权属变更登记手续的，责任不在乙方，应由有过错方承担相关责任。

3. 甲、乙双方应当保守在履行本协议过程中获知的属于对方、以及转让合同双方当事人的商业秘密。

4. 若履行本协议过程中发生争议，由甲、乙双方协商解决。协商不成，任何一方均有权向人民法院提起诉讼。

5. 本协议自甲、乙双方签字盖章之日起生效。

6. 本协议一式两份，甲方和乙方各持一份，两份均具有同等法律效力。 甲方(盖章)：__________________

乙方：_________________________ 代表人(签字)：________________

身份证号码：____________________ ________年____月____日

________年____月____日

委托方：(以下简称甲方)

法定代表人：

居间方：(以下简称乙方)

居间方受委托方委托，双方就居间方向委托方提供有关居间介绍服务等事项，经双方协商，达成如下协议：

一、居间方将中银路城建设工程有限责任公司黄果树旅游文化商品博览底价交易中心工程项目部之建设居间服务介绍给委托方施工。

二、委托方必须出示有关建设施工资质，具备该项目建设施工条件。

三、居间方在委托方具备该项目建设施工的条件下，居间方提供准确信息介绍服务委托方将该项目承包。

四、居间信息服务费：委托方按该项目施工土石方每立方支付三角居间信息服务费给居间方。

付款方式：委托方承包该项目建设施工合同时，委托方必须支付居间方信息服务费贰万元委托方进场施工十天后，委托方须支付居间信息服务费贰万元，余款按委托方土石方施工进度支付给居间方。

五、违约责任按《中华人民共和国合同法》有关条款执行。 本协议一式两份，双方各执一份。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

甲方：__________________________

乙方：__________________________

为共同做好学生的实习工作，明确实习学生与实习单位的责任与义务，根据国家有关法律、法规，本着平等自愿的原则，经甲乙双方协商一致，签订本合同。

一、实习期限及工作时间

乙方_________到甲方实习，实习时间自_________年_______月_______日起至_________年_______月_______日止。

甲方应根据相关法律法规及本单位规章制度，合理安排实习学生的实习工作时间。

二、实习岗位

甲方根据乙方的实际情况和工作需要，安排实习学生到_________部门，从事_________工作。

实习期间，甲方应安排技术人员与管理人员对实习学生进行业务培训、技术指导和日常管理，实习学生应自觉遵守劳动纪律，认真实习。

三、实习工资

1.依照按劳取酬的原则，按甲方现行制度确定实习学生的实习工资，月工资人民币______元。

四、实习期间应遵守以下规定

1.实习学生应遵守国家的法律法规;遵守甲方的实习规章及其它各项规章制度。如违反国家法规和企业的规章制度，甲方可以根据情节轻重给予必要的处分或终止实习。

2.因实习学生造成实习基地财物损失的，按甲方规定处理。

3.乙方如有事请假，应按工作单位规定提前请假。如无故缺勤，作旷工处理。

4.节假日及实习以外的时间由乙方自由支配，乙方的一切个人行为、后果责任自负。

五、培训

1、甲方负责乙方实习前的有关培训，以帮助乙方进入用工单位顺利实习。

2、甲方对乙方有进行职业道德、安全生产和安排上岗前培训的义务。如需乙方从事特种作业，应经过专门培训再上岗。

六、劳动保护

1.甲方需为实习学生提供符合国家规定的安全卫生的工作环境，保证其在人身安全不受危害的环境条件下工作。

2.因学生在实习期间已在学校购买了意外及疾病保险，实习期间乙方发生意外或疾病的，由乙方向学校及投保单位索赔损失，不需甲方承担责任和损失。根据法律规定，乙方实习期间，甲方也不需要为乙方缴纳社会保险。

七、合同解除

1、乙方在本合同履行期间可以在说明原因的情况下向甲方提出终止实习合同，但必须提前30天通知甲方。

2、乙方离职时，需依甲方的规定办妥移交手续。

3、乙方离职手续未经核准前不得擅自离岗，否则按旷工处理。

4、实习期间，甲方如发现实习学生不符合实习要求或不适宜甲方安排工作等情况的，可以向乙方提出终止实习，在为实习学生履行实习工资支付手续后，解除本合同。

5、乙方离职后甲方不再承担任何责任。

八、乙方在已阅读甲方的《劳动合同》的前提下签署此协议。

九、法律效力

本合同正本一式两份，双方各执一份，经甲乙双方签字、盖章之日起生效。

甲方：________________乙方：________________

甲方代表：________________身份证号码：________________

____________年________月________日________年________月________日

技术合同：关于进口直流电机电刷国产化协议书

_________(下称甲方)和_________(下称乙方)，双方经协商签定如下协议：

一、目的与要求

1.通过双方合作，努力使甲方的电刷完成国产化，用性能优良，价格适中的国产电刷取代进口电刷：

2.通过甲方电刷国产化工作，以提高乙方电刷制造技术水平;

3.乙方提供的国产化电刷的技术性能必须达到或接过国外同类电刷的技术水平，并保证今后长期供货时各批量性能保持稳定与试用样品一致，确保甲方的生产能顺利运转。

二、国产化内容

1.先从轧管厂连轧机用1400kw直流电机，限动芯棒用384kw电机电刷开始;

2.在上述电机电刷国产化完全成功后将陆续向甲方所有其他进口电机推广。

三、国产化进程

1.在此协议签订之前甲方已对乙方的设备能力，技术水平和管理水平进行了调研，认为有能力承担进口电刷国产化的研制工作;

2.甲方对乙方提供的试用电刷在1400kw电机(1号下位)进行试用考核，在各种工况下能满足运行需要，并将乙方提供的384kw电机复合电刷装机试用;

3.甲方将在_________年_________季度向乙订制一批国产化电刷做为扩大试用;

4.经三个月考核期，若各项指标均能满足甲方使用条件，则甲方向乙出具试用签定材料并批量订货。

四、双方职责与工作

1.甲方向乙方提供电刷国产化所需要的有关电机，电刷，工况条件，技术参数，电刷实样等供乙方参考，分析和测绘;

2.甲方向乙方提供的电刷试样装机试用，并及时将使用情况反馈乙方;

3.甲方向乙方提供电刷国产化过程中的现场技术服务与调研所需要的条件并积极配合;

4.乙方应调研资汇编成册，将电刷制图编号一同归档并提供甲方一份，以作备案;

5.乙方负责国产化电刷的分析，选型，试制全部工作，并按甲方的要求研制相应使用的电刷;

6.乙方应提供国产试用电刷的技术性能数据与该进口电刷的有关技术性能数据，提交甲方参考;

7.乙方将提供现场技术服务，积极配合甲方安全顺利的搞好国产化工作;

8.双方均持严谨的科学态度进行合作，对在国产化中现反复应以谅解的态度直协商解决，确保电刷国产化顺利进行。

五、费用：甲方不另行向乙方去付研制费，但对国产化成功的电刷按优质的精神在订货价格上予以体现。

六、约束

1.不得向第三方提供双方在国产化过程中的有关试制情况，文件，技术资料;

2.待国产化电刷成功之后，甲方尽快地向乙方定点订货，推广电刷国产化的成果;

3.乙方保证长期批量产品与试制产品质量一致，不得有质量的波动，并将甲方作为重点售后技术服务对象，提供长期技术服务，以保证国产化电刷的稳定使用。

七、本协议未尽事宜由友好协商解决。

八、本协议一式肆份，双方各保留贰份，盖章签字后生效。

甲方(盖章)：_________ 乙方(盖章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

签订地点：_________ 签订地点：_________

技术顾问聘用合同模板

甲方 :

乙方:

甲、乙双方依据《中华人民共和国合同法》相关规定，就甲方聘用乙方一事达成协议内容如下，并订立本合同，以兹双方共同信守。

一、聘用岗位。

甲方聘用乙方担任本公司的技术总顾问，全权负责公司的 技术开发和研制、技术革新和改进、技术的保密和管理、技术指导和咨询服务等。

二、聘用时间。

时间总计为 年，自 年  月  日开始起算至年  月日止。合同每年一签，每年期满双方重新

签订。

三、聘用报酬。

乙方的报酬由两部分构成，一是年薪  元，支付方式：每月支付元，剩下的在年底一次性支付。第二部分是技术开发成果奖励，按照每提供或研制开发一项符合市场推广标准的技术，在根据该技术成果进行生产销售  个月后，确能够带来经济效益的，一次性从每年销售利润中支付乙方万之奖励。

四、技术成果及归属。

乙方主要为甲方提供和研制  等技术或配方。乙方在甲方任职期间，因履行职务或者主要是利用甲方的物质技术条件、业务信息等产生的发明创造，有关的知识产权均属于甲方所有。甲方可以在业务范围内充分自由的利用、生产经营或者向第三方转让。乙方在离职后无权再继续使用该技术或转让该技术。

五、技术成果的标准要求及开发时间、验收。

试验阶段自 年月日至  年  月  日， 年  月至  月  日为试生产阶段。

六、保密责任。

1、乙方任职期间的保密义务。

乙方除了履行职务的需要之外，承诺下列保密义务：

(1)乙方在任职期间，必须遵守甲方规定的保密规章、制度，履行与其工作岗位相应的保密职责；

(2)未经甲方同意不得泄露、告知、转让或者其他任何

方式使任何第三方知悉属于甲方或者属于他人但甲方承诺有保密义务的技术秘密或其他商业秘密信息；

(3)乙方承诺，在甲方任职期间，非经甲方事先同意，

不再与甲方生产、经营同类产品或提供同类服务的其他企业、事业单位、社会团体等担任任何职务，不为他人类似经营提供任何建议；

2、乙方离职之后的保密义务。

双方同意，乙方离职之后仍对其在甲方任职期间接触、知悉的属于甲方或者虽属于第三方但甲方承诺有保密义务的技术秘密和其他商业秘密信息，承担如同任职期间一样的保密义务和不擅自使用有关秘密信息的义务，而无论乙方因何种原因离职；

七、乙方在任职期间应该遵守公司的管理制度或财务制度。乙方在岗位上的食宿由甲方负责人提供，因公出差费用由公司负担。

八、违约责任

甲乙双方任何一方违反本合同之约定造成对方损失的，应该按照损失的大小承担违约赔偿责任。

九、争议的解决

本合同经双方签字公章后生效。因履行本合同发生的争议，双方协商解决，协商不成的，通过仲裁或法律途径解决。

十 、本合同一式份,具有同等法律效力,甲乙双方各执一份。

甲方：乙方：

（签章）（签章）

签订日期：年  月  日

出卖人：

买受人：

签订地点：

签订时间： 年 月 日

第一条 标的、数量、价款及交(提)货时间

化肥 名称 商标 或品牌 规格 生产 厂家 计量 单位 数量 单价 金额 合计合计 合计人民币金额(大写)：

第二条 质量标准： 按国家标准执行

第三条 产品质量异议期限： 买受人收到出卖人的货物后，如对所收货 物的产品质量有异议，在收到货物后七日内向出卖人书面提出，否则买受人 所接收的出卖人全部产品视为合格产品。在上述期限内，如买受人提出书面 质量异议，出卖人派人核实，如确有质量问题，出卖人将不合格产品调换成 合格产品。

第四条 包装标准： 内塑外编

第五条 运输方式和到达站(港)及费用负担： 铁路运输，到(新) 局 哈密站，站前费用由出卖人承担;货物到站后，买受人负责接货，费用由买 受人承担。

第六条 合理损耗标准及计算方法： 按铁路部门有关规定执行

第七条 结算方式： 先货后款， 买受人于 20xx 年 6 月 30 日前一次性向出卖人付清上述货物的全部货款，将货款汇入出卖人指定账户。

第八条 违约责仸： 非因不可抗力，仸何一方不能按照本合同的规定履 行合同则构成违约，未违约方有权向违约方要求损害赔偿。

第九条 担保方式(也可另立担保合同)： 担保人担保

第十条 合同争议的解决方式： 本合同履行过程中发生争议，双方友好 协商解决，协商不成的，仸何一方可向出卖人所在地的人民法院起诉。

第十一条 本合同自 双方法定代表人或其授权代表人签字、盖章之日 起生效。

第十二条 ： 本合同一式两仹，双方各执一仹，具有同等法律效力。

出卖人 出卖人(章)：

住所：

法定代表人 (章或签字)：

居民身仹证号码：

委托代理人：

电话：

传真：

开户银行：

账号：

邮政编码：

买受人

买受人(章)：

住所：

法定代表人 (章或签字)：

居民身仹证号码：

委托代理人：

电话：

传真：

开户银行：

账号：

邮政编码：

担保人：

担保人：

身仹证号码(附身仹证 复印件)：