蟹爪兰养殖技术要点(经典20篇)

中国茶业协作网是由中国茶叶流通协会指导，北京义元商贸中心承办的以推进茶业发展，引导茶叶消费，传播茶文化为宗旨的组织。中茶网为茶业界各企业、各单位，各业界人士服务。

中国茶业协作网（以下简称甲方）与要求服务的各单位或各界人士（以下简称乙方）就各项服务范围共同遵守以下协议：

一、服务内容

1.甲方在中茶网主页上开辟以下服务栏目：

知名茶庄、产销名企、精品展销厅、网员俱乐部、茶业人才市场、茶叶批发市场、茶业艺苑、绿色茶园、经贸动态、市场导航、科技动态、信息咨询、供求热线等内容。

2.甲方负责为乙方提供下列一项至多项形式的服务：（参照《中茶网价目表》）

（1）刊登广告 （2）介绍产品 （3）展销产品  （4）组织贸易洽谈 （5）提供信息 （6）市场信息 （7）其它各种活动

3.甲方在《中国茶叶--精品导购》上进行的服务项目：同以上1，2条。

二、服务方式

a.乙方要求甲方就某项服务内容进行服务，必须向甲方交纳一定的服务费（具体价格参照《中茶网价目表）后，有权享有甲方提供范围内的各项服务，甲方不得无故解除对乙方的服务，否则，甲方必须承担对乙方一定数额的赔偿金。

b.服务的具体内容由乙方提供、甲方制作，甲方有权酌情修改，但需征得乙方同意。

三、交款方式

a.乙方对以下网络项目感兴趣，要求甲方为之服务，按《中茶网价目表》交费，具体如下（可选择一至多项）：

1._______________________服务项目，交纳_____________元服务费；

2._______________________服务项目，交纳_____________元服务费；

3._______________________服务项目，交纳_____________元服务费；

4._______________________服务项目，交纳_____________元服务费；

5._______________________服务项目，交纳_____________元服务费；

6._______________________服务项目，交纳_____________元服务费；

7._______________________服务项目，交纳_____________元服务费；

8._______________________服务项目，交纳_____________元服务费；

9._______________________服务项目，交纳_____________元服务费；

10.______________________服务项目，交纳_____________元服务费；

若同时选择多项，则可适当优惠_____%--_____%，具体价格由双方商议。

乙方共选择 ___________项，共交纳 ___________元。

b.若乙方需在《中国茶叶--精品导购》上要求甲方进行某种项目服务，则应另加收该项在 《中茶网价目表》上相应价格的____%作为甲方的服务费。

乙方选择_______（a，b）项， 总共交纳_________元。

c.乙方选择下列第 ________项作为向甲方的具体交款形式：

1.现金 2.现金支票 3.转帐支票

四、服务时间：从______年_____月_____日始，至______年_____月_____日止。

五、违规责任

1.甲方因特殊原因变更办公地址或服务内容时，需提前半个月通知乙方；

2.乙方可以在网络上查看《中茶网》内容，检查甲方承诺的服务内容是否与《中茶网技术服务合同》规定的相符，若有不符，乙方有权追究甲方的违约责任。

3.甲方若变更其服务项目，例如增加或删减内容，因其中有与乙方要求的相违背或有损害乙方利益的， 应提前半个月通知乙方，双方可以协商解决。若无法协商解决，可向当地仲裁委员会申请仲裁。

4.乙方不得复制、仿照甲方网页内容，不得以任何方式在任何地方对甲方侵权；没有得到甲方允许或授权下，不得以任何理由私自建立茶叶网站，不得再以中茶网名义发表任何作品和以任何借口招收网员等。

以上各条希望双方共同遵守，如若双方有任何一方违约，则违约方必需向对方赔偿一定数额的违约金。

六、争议解决方法：在合同履行过程中发生争议，双方应当协商解决，也可以请求________进行调解；当事人不愿协商、调解解决或协商、调解解决不成的，双方商定，采用以下第_______种方式解决。

1.因本合同所发生任何争议，申请辖区仲裁委员会仲裁；

2.向辖区人民法院起诉。

七、本合同有效期限：______年_____月_____日至 ______年_____月_____日。

八、本合同一式三份：甲、乙方各一份，第三份交由甲方网络部存档。

甲方：____________________

代表人：__________________

________年______月______日

乙方：____________________

代表人：__________________

委托代理人：______________

________年______月______日

甲方：_____________________

乙方：_____________________

甲乙双方为携手合作，促进发展，满足利益，明确责任，依据中华人民共和国有关法律之相关规定，本着诚实信用，互惠互利原则，结合双方实际，协商一致，特签订本合同，以求共同恪守：

第一条：服务内容、方式和要求：

_____________________(属技术培训合同应当填写培训内容和要求、培训计划、进度;属技术中介合同应当填写中介内容和要求)

第二条：工作条件和协作事项：_____________________

第三条：履行期限、地点和方式：_____________________

第四条：验收标准和方法：

技术服务或者技术培训按 _______标准，采用______方式验收，由_____方出具服务或者培训项目验收证明。

本合同服务项目的保证期为______。在保证期内发现服务质量缺陷的，服务方应当负责返工或者采取补救措施。但因委托方使用、保管不当引起的问题除外。

第五条：报酬及其支付方式： 本项目报酬(服务费或培训费)： _______________元。 服务方完成专业技术工作，解决技术问题需要的经费，由 _______________方负担。 本项目中介方活动经费为：_______________ 元，由_______________ 方负担。中介方的报酬为：_______________元，由 _______________方支付。 支付方式(按以下第 _______________种方式)：

1、一次总付：_______________元，时间_______________

2、分期支付：_______________元，时间_______________

3、其它方式：_______________元，时间_______________

第六条：违约金或者损失赔偿额的计算方法

第七条、争议的解决办法

在本合同履行过程中发生争议，双方应当协商解决，也可以请求_______________进行调解。

当事人不愿协商、调解解决或者协商、调解不成的，双方商定，采用以下第_______________种方式解决。

1、因本合同所发生的任何争议，申请_______________仲裁委员会仲裁;

2、按司法程序解决。

甲方签约：_____________________

乙方签约：_____________________

签约日期：_____________________

甲方(养殖场)：

法人代表：

乙方(聘用兽医)：

一、聘用岗位和期限：甲方聘用乙方从事兽医技术员的工作。聘用期限一年，从 年 月 日起至 年 月 日止。

二、甲方职责和义务

1、甲方要在学习和工作上关心乙方，并负责乙方参加省、市业务部门组织相关技术培训的费用。

2、工作补贴：聘用期内甲方给予每月  元的工作补贴，每年发放一次。

三、乙方职责和义务

1、负责研究和指导责任规模场的畜牧业产业发展、动物重大疫病防控、畜产品质量安全监管和养殖场畜牧兽医服务等工作，并督促落实相关政策措施。

2、宣传《动物防疫法》、《农产品质量安全法》、《兽药管理条例》、《饲料和饲料添加剂管理条例》等法律法规和加强动物疫病防控等相关方针、政策、措施。并做好场内畜牧兽医技术员的培训工作。

4、指导规模场建立健全畜禽养殖档案和防疫制度，完善动物重大疫病防治、饲料兽药使用情况等记录记载。重点是围绕动物疫病的免疫、消毒工作，摸清防疫工作中存在的问题，并及时解决。

5、责任规模场内一旦发生动物重大疫情或畜产品质量安全等突发事件，应立即赶赴现场，督促和指导养殖场按应急预案规定进行及时处置，并查明原因。

四、落实好安全保障措施：乙方在工作期间，做好自我保障措施，确保安全，如发生意外事故，均由乙方自身负责，甲方不承担任何法律和经济责任。

五、本协议一式三份，本养殖场执两份，聘用人员执一份。

甲方： (盖章) 乙方(签名盖章)：

公正机关(代表)签名：

协议订立日期： 年 月 日

种植技术服务合同样本

甲方：_________

乙方：_________

本农产品种植技术服务合同由上列各方于_________年_________月_________日在_________订立(本合同适用于_________地区引种_________株以上、建立成规模种植基地_________亩以上的客户)。

双方经协商一致，达成农产品种植技术服务合同，合同如下：

第一条 甲方向乙方提供二年嫁接种苗共_________株、其中_________株、_________株、_________株，单价_________元，总价_________元，_________提货。

第二条 甲方每年举办三次技术班，乙方可选派_________人免费参加。培训内容包括：栽种、育苗、剪枝、病虫害防治、田间管理、加工等。食宿、交通由乙方自理。

第三条 甲方设专家热线，由著名专家免费提供技术咨询。

第四条 乙方有重大技术难题，甲方可派专家现场免费指导解决。差旅费由乙方承担。

第五条 技术服务费：每亩_________元/年。年技术服务费合同签订时即付。合同期限：_________年，自_________年_________月_________日至_________年_________月_________日。

第六条 陈述和保证

6.1 甲方的陈述和保证。甲方向各方陈述和保证如下：

(1)品种纯正;

(2)苗株平均80公分;

(3)检疫手续齐全;

(4)均系二年生秋季嫁接种苗;

(5)按技术规范种植，成活率80%以上;

(6)包三年挂果、五年盛果。

(7)其是一家依法设立并有效存续的有限责任公司;

(8)其有权进行本合同规定的交易，并已采取所有必要的公司行为授权签订和履行本合同;

(9)本合同自签定之日起对其构成有约束力的义务。

6.2 乙方的陈述和保证。乙方向各方陈述和保证如下：

(1)其是一家依法设立并有效存续的有限责任公司;

(2)其有权进行本合同规定的交易，并已采取所有必要的公司行为授权签订和履行本合同;

(3)本合同自签定之日起对其构成有约束力的义务。

第七条 违约责任

7.1 甲方的责任

(1)如甲方未能履行保证义务，乙方有权要求索赔。不符前四项，由甲方按种苗价的一倍予以补偿;不符第五项，由甲方按缺苗实数补齐_________%额(乙方以死苗株为据)。不符第五项，如确因甲方过错，甲方每亩一次性赔偿_________元。

(2)如果甲方违反其在本合同中所作的陈述、保证或其他义务，而使乙方遭受损失，则乙方有权要求甲方予以赔偿。

7.2 乙方的责任

(1)如果乙方违反本合同未支付服务费，则按逾期天数每天罚款_________元给甲方。但无论如何，罚款金额不超过应付技术服务费金额的_________%;

(2)如果乙方违反其在本合同中所作的陈述、保证或其他义务，而使甲方遭受损失，则甲方有权要求乙方予以赔偿。

第八条 保密

一方对因本次农产品种植技术服务而获知的另一方的商业机密负有保密义务，不得向有关其他第三方泄露，但中国现行法律、法规另有规定的或经另一方书面同意的除外。

第九条 补充与变更

本合同可根据各方意见进行书面修改或补充，由此形成的补充协议，与合同具有相同法律效力。

第十条 不可抗力

任何一方因有不可抗力致使全部或部分不能履行本合同或迟延履行本合同，应自不可抗力事件发生之日起三日内，将事件情况以书面形式通知另一方，并自事件发生之日起三十日内，向另一方提交导致其全部或部分不能履行或迟延履行的证明。

第十一条 争议的解决

本合同适用中华人民共和国有关法律，受中华人民共和国法律管辖。

本合同各方当事人对本合同有关条款的解释或履行发生争议时，应通过友好协商的方式予以解决。如果经协商未达成书面协议，则任何一方当事人均有权向有管辖权的人民法院提起诉讼。

第十二条 生效条件

本合同自双方的法定代表人或其授权代理人在本合同上签字并加盖公章之日起生效。各方应在合同正本上加盖骑缝章。

本合同一式_________份，具有相同法律效力。各方当事人各执_________份，其他用于履行相关法律手续。

甲方(盖章)：_________ 乙方(盖章)：_________

代表人(签字)：_________ 代表人(签字)：_________

甲方技术代表(签字)：_________ 乙方技术代表(签字)：_________

出租方：_______________________

承租方：_______________________

根据《中华人民共和国民法典》及相关法律规定，为了明确甲、乙双方的权利、义务，经双方平等协商，签订本合同。

一、甲方将位于____市____路____号的____亩土地的使用权及地上建筑物、构筑物、附着物等出租给乙方使用。

二、乙方承租本宗土地务必进行合法经营，否则甲方有权收回土地使用权，终止合同。

三、乙方不得擅自转租本宗土地的使用权，如需进行转租应征得甲方书面同意，否则甲方有权收回土地使用权，终止合同。

四、甲方应保证本宗土地上的水、电、暖等基本设施完整，并帮忙乙方协调同水、电、暖的带给方的有关事宜，但具体收费事宜由乙与水电暖的带给方协商，所有费用由乙方承担。

五、乙方在租用期间，不得随意改变本宗土地状况和地上的建筑物、构筑物、附着物及水、电、暖管网等设施，如确需改动或扩增设备应事先征得甲方书面同意后方可实施，对有关设施进行改动或扩增设备时如需办理相关手续，由乙方办理，甲方根据实际状况给予协助，所需费用有乙方承担，否则，乙方应恢复原状，并赔偿由此给甲方造成的损失。

六、乙方租用期间，有关市容环境卫生、门前三包等费用由乙方承担。国家行政收费，按有关规定由甲、乙双方各自负担。

七、乙方在租赁期间因生产经营所发生的所有事故及造成他人损害的，由乙方承担职责，与甲方无关。

八、合同约定的租赁期限界满或双方协商一致解除合同后10日内，乙方应向甲方办理交接手续，交接时乙方应保证工作人员撤离、将属于自己的设备腾清，并将租赁范围内的垃圾杂物等清理干净。

九、租赁期限为____年，从____年____月____日至____年____月____日。

十、经甲乙双方商定，租金的交纳采取按年支付先付后用的方式，年租金为____元，由乙方于每年____月____日交纳给甲方。如逾期交纳租金30日以内，乙方除应补交所欠租金外还应向甲方支付年租金日千分之二的违约金;如逾期超过30日，甲方有权解除合同，乙方应甲方支付年租金百分之____的违约金。

十一、甲方向乙方收取约定租金以外的费用，乙方有权拒付。

十二、在租赁期限内，因不可抗拒的原因或者因城市规划建设，致使双方解除合同，由此造成的经济损失双方互不承担职责。

十三、争议解决方式：

十四、双方协商一致可另行签订补充协议，补充协议与本合同具有同等法律效力。

十五、本合同自双方签字盖章后生效。

十六、本合同一式四份，双方各执两份，具有同等法律效力。

甲方_______________________乙方_______________________

____年____月____日____年____月____日

甲方：______

乙方：______

根据中华人民共和国《著作权法》、《广告法》、《电影管理条例》及广发办字(20__)1519号文件精神，双方本着友好合作的原则，经协商一致，达成本协议如下条款：

一、基本条款

1. 影片名称：______

2. 出品单位：______

3. 使用范围：______

4. 技术服务时间：本协议提供影片给电影数字中心的日期由 ______年 ______月

日起至 ______年______ 月______ 日止。如需延长，双方可以书面形式续签协议。

二、结算方法

1. 乙方按场次向上述使用范围的数字电影放映单位出售影片放映权，每场 ______元，其中乙方按每场 ______元收取技术服务费，其余场次费用归甲方所有。

2. 乙方应于该片在数字电影交易服务平台发布之日起，每季度向甲方结清相应场次的版权费。

三、责任和义务

(一)、甲方责任和义务

1. 甲方委托的影片须拥有《电影片公映许可证》，且拥有该片著作权或发行权，并不会侵犯任何第三方影片权利人。如乙方在制作和开展业务过程中发生牵扯第三方影片权利人投诉等事宜，由甲方出面解决并承担相关法律及经济责任。

2. 甲方应向乙方提供影片宣传品，并在影片数字电影交易服务平台()上添加影片资料、发行档期及发行影片单场标价。

3. 甲方提供的影片，如果乙方未收到版权方提供给广电总局电影局的高清数字母版，甲方应派专人负责联络、提供该影片的高清数字母版。甲方提供的高清数字母版应与该片电影局审查通过的发行版一致;若不一致，甲方承担由此产生的相关责任。

4. 甲方有权了解影片发行版的制作进度。

(二)、乙方责任和义务

1. 乙方负责组织相关人员进行影片发行版制作，并负责审查影片的技术制作质量。如果制作影片发行版的高清数字母版是甲方提供的，乙方应在制作完成影片发行版后及时将影片的高清数字母版归还甲方。

2. 影片制作完成后，由乙方通知甲方将影片发布在数字电影交易服务平台，并在乙方信息网站()上对该片进行宣传。

3. 乙方保证维护影片版权，不得向本协议约定运营范围以外的单位或个人出借、出租、出售、串映影片，不准侵权复制、转制本协议约定范围以外的其它载体。违反上述约定，乙方必须承担相应的法律责任。

4. 乙方根据国家广电总局相关文件实现技术服务，因国家政策调整，乙方有权调整技术服务内容，调整后须将变更内容以书面形式通知甲方。

四、在本协议约定的期限内，甲、乙双方都应严格履行协议，不得随意撤销、变更、修改或终止协议。如有违反，违约方要赔偿守约方的经济损失并承担由此引起的一切法律责任。影片发行期间如遇国家级有关部门对影片的修改、删剪、暂停发行、撤销发行等行政命令，甲、乙方双方均应遵守。

五、甲、乙任何一方由于不可抗力或国家政策调整造成不能履行或不能完全履行协议的，双方互不承担法律责任。

六、本协议未尽事宜，另行商定补充文件。

七、本协议自签字之日起生效，本协议正式文本壹式贰份，甲、乙双方各执壹份，均具有同等法律效力。

甲 方：______

乙 方：______

签约时间： ______年 ______月______ 日

发包人(甲方)：_______________

承包人(乙方)：_______________

根据《中华人民共和国民法典》及有关法律、法规的规定，甲、乙双方在平等、自愿、等价有偿、公平、诚实信用的基础上，经友好协商，就甲方委托乙方承担地质勘探工作达成一致意见，特签订本合同，以资信守。

第一条 工程概况

1、工程名称：_______________

2、工程地点：_______________

第二条 承包范围

乙方根据甲方要求进行(_____________________)地块的地质的详细勘探工作。

第三条 承包方式

1、本工程由乙方总承包，包工包料、包工期、包质量、包提供勘探技术报告

2、结算办法：_______________工程完工时，双方按实验收结算。钻探深度按合同要求在现场实量。乙方在每一钻孔按第五条要求完成前四小时应通知甲方或委派的工程监理到现场以核对工程量(包括入岩深度和钻孔X度)并报甲方办理签证。勘探工程的结算以每一钻孔签证的工程量为统计依据，未经确认和签证的工程量甲方不予结算。甲方现场签证人员为甲方技术人员。

第四条 工期

总工期为____天，乙方应在______年_____月_____日开工，至_______年____月___日之前向甲方提交勘探技术报告，实际开工以双方现场代表签字为准。如遇不可抗力的因素，经双方现场代表签证，工期相应顺延。

第五条 技术要求和验收标准

1、本工程的详步勘探要求按国家规范和甲方初施工图设计要求所需资料的技术要求进行，其质量标准应符合国家现行勘探、设计规程、规范和标准，地质报告应满足单体设计及支护土方工程的要求，物理试验成果报告应齐全、准确。

2、在具备"三通一平"的施工场地，乙方应按钻探点布置的要求，布技术孔

个，具体钻孔数量由甲方核准。

3、钻孔X度要求：_______________取土孔孔X_____米，或孔X大于____米。超出上述要求部分的不予结算，如特殊原因需加深超钻的，须经甲方书面确认。

4、钻探机械要求：_______________钻机(柴油发电) _ __台。

第六条 工程造价及付款方式

(一)本工程价格按照招投标中标的价格进行结算，计元/米，乙方提交勘探技术报告经甲方审定后，以甲方确认的工程量按实结算，实际工程量以甲乙双方共同签证为准。

(二)付款方式

1、乙方完成钻探工作后**日内应向甲方提供准确的勘探技术报告，经甲方审定并结算后______工作日内，甲方向乙方支付实际结算工程款的_______%;

2、实际结算工程款的5%作为保修金，在本工程土方及桩基基础工程完成后，若实际情况与乙方提供的勘探技术报告内容相符，甲方一次性向乙方付清;若不相符，则甲方有权扣除相应的保修金。但若在本地质勘探工程完成后的一年内

本工程土方及桩基基础工程不开工的，甲方一次性向乙方付清保修金。

3、以上付款，甲方如以六个月的承兑汇票支付，若甲方或乙方提出按支票方式支付的，则需扣除银行同期贷款利息。支付以上款项时，乙方须先提供国内有效的相应的等值发票，若乙方不能提供发票的，甲方有权代扣代缴税金。

4、若甲方需在本合同约定的标的或工作量以外委托乙方完成一定工程或工作量，应以正式书面形式将具体工作范围、价款、完成时间、付款进度等主要内容通知乙方。若无正式书面委托，甲方不予结算。

第七条 双方义务

(一)甲方义务

1、 甲方应按合同约定支付合同款项。

2、 提供地下障碍物资料(不包括地质情况)，如因资料不准确造成事故的，由甲方负责。现场如遇障碍物影响施工，经甲方同意后可调整孔位。

3、 提供施工场地及现场施工用水(费用由乙方承担)，如因施工场地与第三者产生矛盾时负责及时解决。

4、 因甲方原因造成的工程延误，工期顺延。

5、 向乙方提供开展勘探设计所需的有关基础资料，并对提供的时间与资料的可靠性负责。

(二) 乙方义务

1、 乙方应为具有独立法人资格的工程地质类甲级企业。

2、 应按甲方提出的要求进行工作。提供有关勘探的成果，为基础设计及支护设计提供依据。

3、 提交工程勘探技术报告一式伍份，对所提交的报告及有关技术数据负责，并负责办理规划局审查事宜。

4、委派 作为现场代表，须持有与工程项目相适应的资格证书。负责处理并协调施工过程中发生的有关事宜。如现场代表变更，应事先征得甲方同意。

5、乙方开工前，应将施工负责人员报甲方确认、备案，如乙方更换施工负责人时，应当事先征得甲方同意。

6、乙方在向甲方提交勘探技术报告后5日内应向甲方提供付款通知书及相关资料。如乙方未按时提供导致相关手续不能及时办理的，甲方可不支付款项。

第八条 违约责任

1、除不可抗力的自然及社会原因外，甲乙双方应严格遵守本合同的条款，否则，违约方须承担违约责任。

3、甲方不按时提供有关的资料、文件，从而影响乙方正常的工作的，工期相应顺延。

4、乙方不按时进场开工，视为乙方违约。在甲方书面通知后的* 日内仍不进场施工的，甲方有权单方解除合同，按合同终止和解除条款执行。

5、乙方未按合同工期完成工作的，视为乙方违约。每逾期一日，按工程预算造价的3‰向甲方支付违约金。甲方有权直接在甲方应付未付款中扣除，违约金不足以弥补甲方损失的，甲方可继续向乙方追偿。

6、工程验收未达到约定的勘探技术要求和验收标准的，视为乙方违约。甲方可要求乙方无偿返工，直至符合约定，由此而延误工期的，按本条第五款执行。

7、乙方擅自中途更换施工负责人员，视为乙方违约，甲方有权中止合同，由此而产生的一切经济损失由乙方负责。

8、如乙方现场代表不配合甲方工作或不能胜任工作时，甲方有权要求乙方更换代表，乙方应在甲方要求更换之日起五天内更换，否则视为违约，造成的工程停工等责任由乙方承担。

9、乙方出现违约，甲方有权解除合同，乙方所有人员必须在一个工作日内撤离施工现场。

第九条 转让条款

未经合同其他方书面同意，任何一方不得全部或部分转让其在本合同项下的权利和义务。

第十条 合同终止和解除

(一)有下列情形之一的，合同权利义务终止：_______________

1、本合同因已按约定履行完毕而自然终止;

2、本合同经各方协商一致而终止;

3、本合同因一方违约或因一方有不正当竞争行为或因一方擅自转让本合同项下的权利义务而终止;

4、法律法规规定终止的其他情形。

(二)因违约而终止本合同

1、由于乙方违约造成本合同不能履行或不能完全履行，如果甲方认为本合同已无必要继续履行或乙方在收到甲方要求其纠正违约的通知后仍不纠正其违约行为，则甲方有权向乙方发出解除本合同的书面通知，该通知自送达乙方时生效，乙方除承担本合同约定的违约责任外，另须按工程预算总造价的20%向甲方支付违约金，并赔偿由此给甲方造成的损失。

2、由于甲方违约造成本合同不能履行或不能完全履行，如果甲方在收到乙方要求其纠正违约的通知后仍不纠正其违约行为，则乙方有权向甲方发出解除本合同的书面通知，该通知自送达甲方时生效，甲方应向乙方支付双方确认已完成工作量的款项，并按本合同约定承担违约责任。

3、守约方依据本款规定解除本合同，并不影响其追究违约方的违约责任的权利。

4、甲方依据本款第1项的规定解除本合同，甲方可以按其认为适当的条件和方式寻求救急(例如寻找本合同之外的第三方履行本合同项下的义务)，乙方应承担甲方因此而发生的额外费用。

第十一条 保密条款

1、未经合同其他方书面同意，任何一方对本合同和各方相互提供的资料、信息(包括但不限于商业秘密、技术资料、图纸、数据、以及与业务有关的客户的信息及其他信息等)负保密责任，并不得向任何人披露上述资料和信息，但正常履行本合同项下义务的除外。

2、任何一方泄密导致合同其他方遭受损失的，泄密方应按工程预算总造价的20%向合同其他方支付违约金，违约金不足以赔偿合同其他方损失的，应按合同其他方的实际损失赔偿。

3、本保密条款具有独立性，不受本合同的终止或解除的影响。

第十二条 不可抗力条款

由于不能预见、不能避免和不能克服的自然原因或社会原因，致使本合同不能履行或者不能完全履行时，遇到上述不可抗力事件的一方，应立即书面通知合同其他方，并应在不可抗力事件发生后十五天内，向合同其他方提供经不可抗力事件发生地区公证机构出具的证明合同不能履行或需要延期履行、部分履行的有效证明文件。由合同各方按事件对履行合同影响的程度协商决定是否解除合同、或者部分免除履行合同的责任、或者延期履行合同。

第十三条 适用法律条款

本合同的订立、效力、解释、履行和争议的解决均适用中华人民共和国法律法规。

第十四条 争议的解决

凡因执行本合同所发生的或与本合同有关的一切争议，合同各方应通过友好协商解决;如果协商不能解决，任何一方均可向工程所在地有管辖权的人民法院起诉。

第十五条 其它

1、本合同未尽事宜，由甲乙双方友好协商，另签订补充协议。补充协议与本合同具同等法律效力。

2、本合同一式四份，甲、乙双方各执两份，均具同等法律效力。

3、本合同自双方签字盖章后生效。

4、其它约定：_______________

甲方：_______________ 乙方：_______________

地址：_______________ 地址：_______________

邮箱：_______________ 邮箱：_______________

法定代表人 法定代表人

(或授权签约人)：_______________ (或授权签约人)：_______________

联系电话：_______________ 联系电话：_______________

附件1：

廉洁 协 议

甲方：_______________

乙方：_______________

为了在工程建设中保持廉洁自律的工作作风，防止各种不正当行为的发生，结合工程建设的特点，甲乙双方订立协议如下：_______________

一、甲乙双方应当自觉遵守国家、地方法律法规以及本协议的约定，在建设工程承发包，合同的订立、履行过程中廉洁自律。

二、甲方及其工作人员不得以任何形式向乙方索要和收受回扣等好处费。

三、甲方工作人员应当保持与乙方的正常业务交往，不得接受乙方的礼金、有价证券和贵重物品，不得在乙方报销任何应由其个人支付的费用。

四、甲方工作人员不得参加可能对公正开展业务有影响的宴请和娱乐活动。如甲方工作人员确因实际情况须参加宴请、进行娱乐活动的，须事先按行政隶属关系上一级批准。

五、甲方工作人员不得要求或者接受乙方为其住房装修、婚丧嫁娶、家属和子女的工作安排以及出国等提供方便。

六、乙方不得接受甲方工作人员介绍的家属或者亲友从事与甲方工程有关的材料设备供应、工程分包等经济活动。

七、乙方应当通过正常途径开展相关业务，不得为获取某些不正当利益而向甲方工作人员赠送礼金、有价证券和贵重物品等，或给甲方工作人员报销其个人费用，或邀请甲方工作人员外出旅游和进入营业性娱乐场所，或为甲方工作人员住房装修、婚丧嫁娶、家属和子女的工作安排以及出国等提供方便。

八、乙方不得为谋取私利与甲方工作人员就工程承包、工程费用、材料设备供应、工程量变动、工程验收、工程质量问题处理等进行私下商谈或者私下达成协议。

九、乙方如发现甲方工作人员有违反上述协议者，应向甲方举报。甲方不得找任何借口对乙方进行报复。甲方对举报属实和严格遵守廉洁协议的乙方，在同等条件下给予承接后续工程的优先邀请投标权。

十、甲方发现乙方有违反本协议或者采用不正当的手段行贿甲方工作人员，甲方根据具体情节和造成的后果追究乙方工程合同造价1~5%的违约金。由此给甲方造成的损失均由乙方承担。甲方有权按合同终止和解除条款执行。

十一、本廉洁协议作为 本 合同的附件，与合同具有同等法律效力，自双方签字盖章后生效。

十二、本协议一式 4 份，甲、乙双方各执 2份。

甲方：_______________ 乙方：_______________

法定代表人 法定代表人

(或授权签约人)：_______________ (或授权签约人)：_______________

签约日期：_______________ 签约日期：_______________

1.乙方人员在国工作期间，由甲方按本合同的规定向乙方人员支付每月的工资。

2.凡工作不满1个月的乙方人员，按下列公式计算：不满1个月工资月的工资＝×工作天数（包括周日和官方假日）30天

3.上述工资应以乙方人员到达国之日起到离开国之日止计算。

4.乙方于每月末将乙方人员该月的工资，包括加班费，列具清单提交甲方，甲方于清单开出之日起天内按清单所列金额的

以美元支付，并按当天牌价电汇给中国银行乙方帐户，并按国银行的规定负担其手续费。同时书面通知中国驻国大使馆经济参赞处。

5.甲方将乙方人员月工资和加班费的以国

货币支付并汇给中国驻国大使馆经济参赞处在

银行帐户。

最新农业技术服务合同

甲方：_________

乙方：_________

为了发展农村商品生产，提高_________生产的技术水平，提高经济效益，经甲乙双方充分协商，特签订本合同，以便双方共同遵守。

一、应甲方邀请，乙方到甲方居住地传授_________生产的技术，合同期限为_________年_________月，即从_________年_________月_________日起至_________年_________月_________日止。

二、至合同期满，乙方保证甲方达到如下技术水平：_________。

三、甲方负责提供乙方传授_________生产技术所必需的资金_________元，提供生产设备_________，保障_________原料的及时供应.甲方应严格服从乙方的技术指导。

四、在合同执行期间，甲方每月付给乙方报酬_________元，按月结算(或合同期届满统一结算)。乙方的食宿由甲方负责安排，费用由_________方负担。

五、合同期届满，如乙方的传授指导没有达到合同规定的技术要求，除退回甲方付给的报酬，赔偿甲方的一切损失外，还应向甲方偿付违约金_________元。如乙方中止执行合同，除应赔偿甲方的一切费用支出外，应向甲方偿付违约金_________元。如甲方不按合同规定的时间付给乙方报酬，迟付一日，应按迟付金额的_________%偿付给乙方违约金.如甲方中止执行合同，应付给乙方合同期内的全部报酬。

六、合同生效后，任何一方不得任意变更或解除合同，合同中如有未尽事宜，须经甲乙双方共同协商，作出补充规定，补充规定与本合同具有同等效力。

七、如遇人力不可抗拒的灾害造成合同无法履行时，由双方协商解决。

八、其他：_________。

本合同正本一式两份，甲乙双方各执一份。(如经过公证)_________各留存一份。

甲方(签章)：_________ 乙方(签章)：_________

_________年____月____日 _________年____月____日

技术合同：产品技术转让合同

项目名称：_________

转让单位(甲方)：_________

受让单位(乙方)：_________

为了保障技术商品合理转让，有偿付诸应用，促使新产品早日试制并投放市场，提高经济效益，甲乙双方根据自愿互利的原则协商一致，特订立本合同，以便双方共同遵守。

一、甲方将_________技术转让给乙方，乙方使用该项技术生产_________产品。

二、甲方转让技术应达到的主要技术经济指标和经济效益。

1.该项技术的参数，所生产产品的数量、质量指标，最低或正常的生产能力，单项规格、公差等_________。

2.经济效益_________。

三、国内外运用该项技术的情况和经济效益

_________。

四、甲方的义务

1.甲方应于_________年_________月_________日以前，将_________技术的资料和设备、配件等(可用表格列出)交付乙方。

2.甲方负责在_________年_________月_________日派出技术人员_________名到乙方单位，指导乙方安装设备和产品试制工作，并派员参与产品的鉴定工作。

3.甲方在合同执行期间对转让给乙方的技术如有后续改进，应及时转让给乙方(双方协商互不相告技术后续改进内容者除外)。

4.甲方转让给乙方的技术，应对第三方保密，不得扩散或转让(双方协商同意甲方另行转让者除外)。

五、乙方的义务

1.双方协商议定，技术转让费按下列第_________项办法支付：

(1)乙方向甲方交付技术转让费共_________元，一次总算支付。

(2)乙方向甲方支付技术转让费，按甲方转让技术实施后新增销售额或利润的_________%提成。

(3)双方按商定的其它办法计算和支付技术转让费用。(如双方商定有预交定金条款，应专条规定定金的金额和交付时间。)

2.在设备安装和产品试制过程中，乙方应服从甲方技术人员的指导。乙方应为甲方派出的技术人员提供工作和生活方便。

3.乙方对甲方转让的_________技术不得向第三方扩散和转让(双方商定同意乙方转让者除外)。乙方对甲方转让的技术如有后续改进，应告之甲方改进内容(双方协商互不相告者除外)。(如双方商定乙方向甲方支付一定入门费，则应在合同中立专条规定入门费的金额，交付时间等。)

六、转让技术的验收标准与验收方式

1.验收标准_________。

2.验收方式_________。

七、甲方的违约责任

1.甲方如不按合同规定的时间，数量及质量向乙方交付技术资料、设备和配件，应向乙方偿付相当于技术转让费_________%的违约金。如甲方迟延交付技术资料、设备及配件，致使乙方接受甲方转让的_________技术已成为不必要时，乙方可以提出解除合同。

2.甲方如不按合同规定的时间、数量及规格派出技术员，应承担乙方因此所受的损失。

3.甲方如擅自将向乙方转让的技术又扩散，转让给第三方，应按技术转让费的_________%向乙方偿付违约金。

4.甲方转让给乙方的技术如有纰漏，应及时更正和完善;如仍达不到合同规定的经济技术指标，应按技术转让费的_________%向乙方偿付违约金，并应赔偿乙方因此所受的损失。

八、乙方的违约责任

1.乙方如不按合同规定的时间、数量向甲方支付技术转让费，应按银行关于延期付款的规定向甲方偿付违约金。

2.乙方如擅自将甲方转让的技术扩散或转让给第三方，应按技术转让费的_________%向甲方偿付违约金。

3.乙方如果在合同规定的时间内未将甲方转让的技术付诸生产，除应向甲方支付转让费外，不得干预甲方另将技术转让给第三方。

九、不可抗力

甲乙双方如因不可抗力的原因不能履行合同，经有关部门证实后，不以违约论，但必须及时告知对方有关情况。

十、其它

1.本合同从_________年_________月_________日起生效，合同期为_________年零_________个月。甲乙双方在合同期间不得随意更改或废除合同。

2.在合同中如有未尽事宜，应由双方协商，作出补充规定。补充规定与本合同具有同等效力。

3.合同执行中如发生纠纷，双方属于同一系统的，由上级主管部门解决，不属同一系统的，或经主管部门调解不成的，任一方当事人可以提请合同仲裁机关仲裁或法院审理。

4.本合同正本一式二份，甲乙双方各执一份;合同付本一式_________份，交_________等单位各留存一份。

5._________。

甲方(盖章)：_________ 乙方(盖章)：_________

代表人(签字)：_________ 代表人(签字)：_________

技术负责人(签字)：_________ 技术负责人(签字)：_________

开户银行：_________ 开户银行：_________

共2页，当前第1页12

科研技术出资协议书

（以下简称甲方）与              （以下简称乙方）根据《合同》的基本原则就合营公司生产                    的专利技术，经友好协商，达成以下协议：

第一章、技术的内容和范围：

1-1 乙方同意甲方以制造                   的专利技作为其股份投入合营公司，甲方提供之技术必须达到《合同》第四章中规定的生产经营目的、规模。该技术包括产品技术、制造工艺、测试方法、材料配方、质量标准，人员培训。

1-2 甲方保证将本协议1-1中规定之技术全部转让给合营公司，并保证提供之技术是甲方同类技术中最先进的，设备的选型及性能质量是优良的，并符合工艺操作和实际使用的要求，该设备的选择能够符合合营公司的经营目的和生产规模.

1-3 合营公司有权使用甲方提供的                   专利和商标,在任何国家、地区销售合营公司的产品，不另需支付费用。

第二章、价格：

2-1  专利技术指乙方拥有独占专利权的专利技术，包括制造         产品所需要的设计、制造的专利技术。乙方同意甲方以专利技术作价     万美元，占合营公司注册资本的   %。如在《合同》中规定的合营期限内专利有效期截止，乙方同意以现汇补足其应缴出资额。

2-2 上述专利技术等作价出资部分不包括购买制造产品的设备及运输、仓储、税金等技术作价投资以外的内容。

第三章、技术投入和投入的条件

3-1  乙方同意从甲方取得，甲方同意向乙方转让《合同》产品的设计、制造专利技术。

3-2  乙方承认甲方在中国设计和制造《合同》产品，以及使用、销售和出口这些产品的权利，为不可转让的权利。

3-3  甲方有义务向乙方提供《合同》产品的专利技术。专利技术清单详见本协议附件1。

3-4  如果乙方需要，甲方有义务以最优惠的价格向乙方提供协议产品的零配件或材料等。届时甲、乙双方另协商签定合同。

第四章、技术的改进

4-1  甲方提供的技术资料，如有不适合于甲方生产条件的（如设计标准、材料、工艺装备及其它生产条件等），甲方有义务协助乙方修改技术资料并提交给合营公司，不另收费用。

4-2  在技术转让的有效期内，甲方和乙方在协议规定的范围内的任何改进和发展，都相互免费将改进、发展的技术资料提交给对方使用。

4-3  改进和发展的技术，所有权属于改进、发展的一方，对方不得去申请专利或转让给第三方。

4-4  合营公司对技术的改进归甲、乙双方共有，任何单方面不得单独使用；合营公司改进技术由合营公司申请专利。

第五章、考核和验收

5-1  甲方保证所交付的技术资料、图纸清晰完整、正确，能满足合营公司的设计、安装、运行和维修的要求，达到《合同》中规定的经营目的和生产规模。

5-2  为了验证甲方技术资料的正确性、可靠性，由甲、乙双方技术人员一起在甲方共同进行产品考核验收。考核验收细则见附件2。

5-3  经考核，《合同》产品符合技术资料规定的技术参数，即通过验收。甲、乙双方签署产品考核验收合格证书一式四份，甲、乙双方各执两份。

第六章、保密与侵权

6-1  甲方保证拥有本协议规定提供的                    专利技术合法所有权，并有权向合营公司转让；如果发生第三者指控侵权，甲方应负责与第三者交涉，并承担由此产生的一切法律和经济责任。

6-2  乙方同意对甲方提供的技术予以保密，如果上述技术内容的一部分或全部被第三方公布，而且合营公司获得了已公布的证据，则合营公司不再承担保密义务，并认为该技术已经失效，甲方也应以现汇如数补足注册资本之差额。保密的期限不能超过合营期限。

第七章、安装、调试和人员培训

7-1  乙方有义务接受、安排甲方技术人员和管理人员赴合营工厂进行设备安装调试、技术和管理培训。

共2页，当前第1页12

售后技术支持合约

甲方：(委托方)：

乙方：(受托方)：

根据《民法典》甲乙双方经友好协商在平等、互利、合作的基础上，就甲方委托乙方进行物联网相关技术支持事宜达成以下共识：

一、工作内容

乙方对甲方所经营的业务提供物联网方面的技术支撑和业务方面的规划。

二、甲乙双方的权利和义务

为保证问题能快速、及时、准确得到解决，甲方需提供相关的技术资料、文件、人员，配合乙方。

三、合同期限

本合同有效期自年月日至年月日止，合同到期后自动失效，任何一方如需延长时间，双方在期满后另议。

四、责任条款

甲乙双方有义务完成此合同所规定的各项内容，如果发生争议，双方应本着平等、互谅的精神友好协商解决。如果协商不成，双方同意通过法律途径解决。

五、未尽事宜

双方未尽事宜另签补充协议，补充协议与本协议具有同等法律效力。

六、合同生效

本合同自甲、乙双方签字、盖章后生效

本合同一式贰份，甲、乙双方各执壹份，具有同等法律效力。

甲方(公章)：_________乙方(公章)：_________

法定代表人(签字)：_________法定代表人(签字)：_________

_________年____月____日_________年____月____日

甲方(客户)： 地址： 电话： 乙方： 地址： 电话： 根据《民法典》等有关法律、法规的规定，就乙方为甲方提供企业管理咨询事宜，双方在平等互惠、协商一致的基础上达成如下条款，以共同遵守。

一、服务项目 甲方聘请乙方就下列项目为甲方提供管理咨询服务：

1、企业诊断咨询; 对企业的现状、经营状态、运营问题和效率进行系统诊断;得出诊断结论分析，指出解决路向。

2、企业发展战略咨询; 提供企业战略分析、选择、规划、保障体系设计、执行、评估等服务; 提供战略管理的理念、知识、方法和工具，培训相应的知识和能力;

3、人力资源管理咨询; 提供企业人力资源管理诊断及有效性分析、企业人力资源管理系统设计; 提供企业人力资源规划(数量、结构、能力提升)、职务分析与职务评价; 提供素质模型潜能评价体系建设、任职资格标准体系建立; 提供绩效考核体系设计、薪酬体系设计; 提供企业内外部培训项目分析及实施效果评价;

二、项目完成期限及收费

1、以上单项服务项目收费标准为人民币元项，三项合计优惠价为人民币元(含税)。于签约后一次性支付。

2、乙方应在本合同生效日壹周内开始实施咨询服务，并在________年内完成所有的咨询服务。

三、甲方乙方的基本义务

(一)甲方的基本义务

1、与乙方诚信合作，为乙方开展工作提供便利，向乙方提供与服务事项相关的情况和资料。

2、如有关的情况和事实发生变化，应及时告知乙方。

3、按照约定支付服务费。

4、向乙方提出的要求不应与法律及会计职业道德和职业纪律规定相冲突。

(二)乙方的基本义务

1、必须遵守职业道德和执业纪律。

2、应当勤勉尽职，依法在合同约定范围内维护甲方的最大利益。

3、应当及时向甲方发表顾问意见;按时完成提交项目报告。

4、对甲方的商业秘密或个人隐私应当保守秘密。

四、生效、违约处理及其他约定事项

1、本合同在签约并成功付费后生效。

2、双方之间发生争议的，应当进行协商或由第三方调解，在无法通过协商和调解方式的情况下，任何一方均可向人民法院起诉。

3、本合同未尽事宜，甲乙双方应持积极态度友好协商解决。

4、本合同一式贰份，甲乙双方各执壹份，效力相同。 甲方(盖章)：乙方(盖章)： 代表受权人(签字)：代表受权人(签字)：________年____月____日________年____月____日

委托方(甲方)：____________

承接方(乙方)：____________

经甲、乙双方友好协商，甲方决定委托乙方承担建筑设计咨询工作。为了保证工作顺利进行，根据国家有关规定，特签订本合同(包括本合同附件和所有补充合同)，以便共同遵守。

一. 甲方需设计、咨询服务项目地址为，建筑面积平米现正式委托乙方进行建筑节能方案咨询及设计工作。

二. 付款方式

1)后乙方向甲方支付设计费总额的30%人民币315000.00元，人民币大写叁拾壹万伍仟元整。其它70%节能方案设计咨询服务费人民币735000.00元，人民币大写柒拾叁万伍仟元整，该项目节能验收合格后____日内付完全部费用。

2)因甲方不能及时支付设计、咨询服务费，乙方有权停止设计、咨询服务工作。乙方延迟支付设计、咨询服务费每日支付总款额10% 的滞纳金。

3)以上款项不含税，甲方如需开工程发票应向乙方另行支付设计、咨询服务费总额的17%。

三. 乙方义务

1)乙方收到设计、咨询服务费定金第____日跟据甲方提供的原始建筑图纸及现场照片展开设计、咨询服务工作。甲乙双方约定，本阶段设计方案应于本合同签订之日起日内完成。

2)乙方负责对原节能设计(外墙内保温)部份，与原设计单位进行协调达到验收条件。

3)乙方需对甲方项目信息保密，因乙方泄密造成甲方损失，一切费用由乙方承担。

四. 甲方义务

1)对该项目外墙玻璃部份与当地职能部门协调达到验收条件。

2)对该项目办公楼外墙内保温进行施工达到验收条件。

3)甲方负责节能验收过程中全部费用。

4)甲方需对乙方设计、咨询服务工作信息保密，因甲方泄密造成乙方损失，一切费用由甲方承担。

五. 设计、咨询服务合同经双方签字盖章认可后，甲方应按以上程序支付设计、咨询服务费。在合同履行期间，甲方要求终止或解除合同，设计人未开始设计工作的，不退还甲方已付的定金;已开始设计工作的，甲乙双方应根据设计人已进行的实际工作量，不足一半时，按该阶段设计费的一半支付;超过一半时，按该阶段设计费的全部支付。

六. 如乙方未能于双方约定完成设计咨询服务工作，双方约定甲方根据乙方延迟设计咨询服务工作总额的3‰日扣除乙方设计、咨询服务费。

七.本合同中如有未尽事宜，由双方协商解决。

八.本合同一式两份，甲方执贰份，乙方执壹份。

九. 甲方可以通过银行汇款 将上述各款项于指定的期限内支付到乙方下列账户：____________账户名称：____________账户号码：____________银行名称：________________________

甲方：____________

乙方：____________

日期：____________

技术转让合同书

项目名称：_____________________

签订时间：_____________________

签订地点：_____________________

有效期限：_____________________

受让方(甲方)：_______________

住所地：_______________________

法定代表人：___________________

项目联系人：___________________

联系方式：_____________________

通讯地址：_____________________

电话：_________________________

传真：_________________________

电子信箱：_____________________

让与方(乙方)：_______________

住所地：_______________________

法定代表人：___________________

项目联系人：___________________

联系方式：_____________________

通讯地址：_____________________

电话：_________________________

传真：_________________________

电子信箱：_____________________

本合同乙方以_______________(独占、排他、普通)方式______________许可甲方实施其所拥有的______________专利权，甲方受让该项专利的实施许可并支付相应的实施许可使用费。双方经过平等协商，在真实、充分地表达各自意愿的基础上，根据《中华人民共和国合同法》的规定，达成协议，并由双方共同恪守。

第一条 本合同许可实施的专利权：

1.为____________(发明、实用新型、外观设计)专利。

2.发明人/设计人：_______________________________。

3.专利权人为：__________________________________。

4.专利授权日：__________________________________。

5.专利号：______________________________________。

6.专利有效期限：________________________________。

7.专利年费已交至________________________________。

第二条 乙方在本合同生效前实施或许可本项专利的基本状况如下：

1.乙方实施本项专利权的状况(时间、地点、方式和规模)：__________________________________

2.乙方许可他人使用本项专利权的状况(时间、地点、方式和规模)：__________________________

第三条 乙方许可甲方以如下范围、方式和期限实施本项专利：

1.实施方式：___________________________________________________________

2.实施范围：___________________________________________________________

3.实施期限：___________________________________________________________

第四条 为保证甲方有效实施本项专利，乙方应向甲方提交以下技术资料：

1._______________________________________________

2._______________________________________________

3._______________________________________________

4._______________________________________________

第五条 乙方提交技术资料的时间、地点、方式如下

1.提交时间：___________;

2.提交地点：___________;

3.提交方式：___________。

第六条 为保证甲方有效实施本项专利，乙方向甲方转让与实施本项专利有关的技术秘密：

1.技术秘密的内容：______________________________________________________

2.技术秘密的实施要求____________________________________________________

3.技术秘密的保密范围和期限：____________________________________________

第七条 为保证甲方有效实施本项专利，乙方向甲方提供以下技术服务和技术指导：

1.技术服务和技术指导的内容：____________________________________________

2.技术服务和技术指导的方式：____________________________________________

第八条 双方确定，乙方许可甲方实施本项专利及转让技术秘密、提供技术服务和技术指导，按以下标准和方式验收：

1.___________________________________________;

2.___________________________________________;

3.___________________________________________。

第九条 甲方向乙方支付实施该项专利权使用费及支付方式为：

1.许可实施使用费总额为：_________________________

其中：技术秘密的使用费为：_________________________

技术服务和指导费为：_________________________

2.许可实施使用费由甲方______ (一次、分期或提成)支付乙方。

具体支付方式和时间如下：

(1) ________________________________________________

(2) ________________________________________________

(3) ________________________________________________

乙方开户银行名称、地址和账号为：_____________________

开户银行：__________________________________________

地址：_____________________________________________

账号：_____________________________________________

3.双方确定，甲方以实施专利技术所产生的利益提成支付乙)许可使用费的，乙方有权以_____________方式查阅甲方有关的会计账目。

第十条 乙方应当保证其专利权实施许可不侵犯任何第三人的合法权益，如发生第三人指控甲方侵犯专利权的，乙方应当______

第十一条 乙方应当在本合同有效期内维持本项专利权的有效性。如由于乙方过错致使本项专利权终止的，乙方应当按本合同第十六条的约定，支付甲方违约金或赔偿损失。

本项专利权被国家专利行政主管机关宣布无效的，乙方应当陪偿甲方损失，但甲方已给付乙方的使用费，不再返还。

第十二条 甲方应当在本合同生效后_______日内开始实施本项专利;逾期未实施的，应当及时通知乙方并予以正当解释，征得乙方认可。甲方逾期___日未实施本项专利且未予解释，影响乙方技术转让提成收益的，乙方有权要求甲方支付违约金或赔偿损失。

第十三条 双方确定，在本合同履行中，任何一方不得以下列方式限制另一方的技术竞争和技术发展：

1._______________________________________________;

2._______________________________________________;

3._______________________________________________。

第十四条 双方确定：

1.甲方有权利用乙方许可实施的专利技术和技术秘密进行后续改进。由此产生的具有实质性或创造性技术进步特征的新的技术成果，归 (甲方、双方)______方所有。具体相关利益的分配办法如下：______________________________________

2.乙方有权在许可甲方实施该项专利权后，对该项专利权涉及的发明创造及技术秘密进行后续改进。由此产生的具有实质性或创造性技术进步特征的新的技术成果，归______ (乙方、双方)方所有。具体相关利益的分配办法如下：______________

第十五条 本合同的变更必须由双方协商一致，并以书面形式确定。但有下列情形之一的，一方可以向另一方提出变更合同权利与义务的请求，另一方应当在——日内予以答复;逾期未予答复的，视为同意：

1.________________________________________________;

2.________________________________________________;

3.________________________________________________;

4.________________________________________________。

第十六条 双方确定，按以下约定承担各自的违约责任：

1.___________方违反本合同第___________条约定，应当__________________ (支付违约金或损失赔偿额的计算方法)。

2.___________方违反本合同第___________条约定，应当__________________ (支付违约金或损失赔偿额的计算方法)。

3.___________方违反本合同第___________条约定，应当__________________ (支付违约金或损失赔偿额的计算方法)。

4.___________方违反本合同第___________条约定，应当__________________ (支付违约金或损失赔偿额的计算方法)。

第十七条 双方确定，在本合同有效期内，甲方指定_________为甲方项目联系人，乙方指定_________为乙方项目联系人。项目联系人承担以下责任：

1.________________________________________________;

2.________________________________________________;

3.________________________________________________。

一方变更项目联系人的，应当及时以书面形式通知另一方。末及时通知并影响本合同履行或造成损失的，应承担相应的责任。

第十八条 双方确定，出现下列情形，致使本合同的履行成为不必要或不可能，可以解除本合同：

1.发生不可抗力;

2.________________________________________________;

3.________________________________________________。

第十九条 双方因履行本合同而发生的争议，应协商、调解决。协商、调解不成的，确定按以下第_________种方式处理：

1.提交______________仲裁委员会仲裁;

2.依法向人民法院起诉。

第二十条 双方确定：本合同及相关附件中所涉及的有关名词和技术术语，其定义和解释如下：

1.________________________________________________;

2.________________________________________________

3.________________________________________________

4.________________________________________________

5.________________________________________________

第二十一条 与履行本合同有关的下列技术文件，经双方以_________方式确认后，为本合同的组成部分：

1.技术背景资料：_________________________________;

2.可行性论证报告：_________________________________;

3.技术评价报告：_________________________________;

4.技术标准和规范：_________________________________;

5.原始设计和工艺文件：_________________________________;

6.其他：___________________________________________。

第二十二条 双方约定本合同其他相关事项为：____________________

第二十三条 本合同一式_______份，具有同等法律效力。

第二十四条 本合同经双方签字盖章后生效。

甲方：(盖章)_________________________

法定代表人/委托代理人：(签名)_______

_____________年___________月_________日

乙方：(盖章)_________________________

法定代表人/委托代理人：(签名)_______

_____________年___________月_________日

印花税票粘贴处：_________________________

(以下由技术合同登记机构填写)

合同登记编号：_________________________

1.申请登记人： _________________________

2.登记材料：(1)_________________________

(2)_________________________

(3)_________________________

3.合同类型：_________________________

4.合同加以额：_________________________

5.技术交易额：_________________________

技术合同登记机构(印章)：_____________

经办人：_______________________________

_____________年___________月_________日

技术咨询合同范本2篇

依法成立的合同从成立之日起生效，具有法律约束力。今天第一范文网小编想要和大家分享的是：技术咨询合同范本，共2篇 ;具体内容如下，希望能对打击有所帮助!

技术咨询合同范本一

项目名称：____________________________

委托方(甲方)：____________________________

顾问方(乙方)：____________________________

填写说明

一、“合同登记编号”的填写方法：

合同登记编号为十四位，左起第一、二位为公历年代号，第三、四位为省、自治区、直辖市编码，第五、六位为地、市编码，第七、八位为合同登记点编号，第九至十四位为合同登记序号，以上编号不足位的补零。各地区编码按GB2260-84规定填写。

二、技术咨询合同是指当事人一方为另一方就特定技术项目提供可行性论证、技术预测、专题技术调查、分析评价报告所订立的合同。

三、计划内项目应填写国务院部委、省、自治区、直辖市、计划单列市、地、市(县)级计划，不属于上述计划的项目此栏划(/)表示。

四、技术情报和资料的保密：

包括当事人各方情报和资料保密义务的内容、期限和泄漏技术秘密应承担的责任。

双方可以约定，本合同变更、解除、终止，本条款均有效。

五、其他：

合同如果是通过中介机构介绍签订的，应将中介合同作为本合同的附件。

六、委托代理人签订本合同时，应出具委托证书。

七、本合同中，凡是当事人约定无需填写的条款，在该条款填写的空白处划(/)表示。

依据《中华人民共和国合同法》的规定，合同双方就________

项目的技术咨询，(该项目属____计划)，经协商一致，签订本合同。

一、咨询的内容、形式和要求：

二、履行期限、地点和方式：

本合同自____年__月__日至____年__月__日在________(地点)履行。

本合同的履行方式：

三、委托方的协作事项：

在合同生效后________(时间)内，委托方应向顾问方提供下列资料和工作条件;

其他：

四、技术情报和资料的保密：

五、验收、评价方法：

咨询报告达到本合同第一项所列的要求，采用方验收，由

方出具技术咨询验收证明。

评价方法：

六、报酬及其支付方式：

(一)本项目报酬(咨询经费)：____________

元。

顾问方进行调查研究、分析论证、试验测定的经费为____

元，由____方负担。(此项经费如包含在咨询经费中则不再单列)

(二)支付方式(采用以下第____

种方式)：

①一次支付：________

元，时间：________________

②分期支付：________

元，时间：________________

____________

元，时间：________________

③其他方式：

七、违约金或者损失赔偿额的计算法：

违反本合同约定，违约方应当按_________________________________

规定，承担违约责任。

(一)违反本合同第____

条约定，____方应当承担违约责任，承担方式和违约金额如下：

(二)违反本合同第____

条约定，____方应当承担违约责任，承担方式违约金额如下：

(三)

八、争议的解决办法：

在合同履行过程中发生争议，双方应当协商解决，也可以请求________进行调解。

双方不愿协商、调解解决或者协商、调解不成的，双方商定，采用以下第(

)种方式解决。

1.由仲裁委员会仲裁;

2.向人民法院起诉。

九、其他(含中介方权利、义务、服务费及其支付方式等上述条款未尽事宜)：

十、本合同有效期限：____年____月____日至____年____月____日

甲方：____________________

乙方：____________________

代表人：________________

代表人：____________________

年____月____日____

年____月____日

技术咨询合同范本二

编号：

日期： 年 月 日

中国公司(以下简称“甲方”)为一方，××国××公司(以下简称“乙方”)为一方，双方就工程的技术咨询服务，授权双方代表按下列条款签订本协议书：

一、甲方请乙方就工程提供技术咨询服务，乙方愿意提供这样的服务。

二、乙方向甲方提供的技术咨询服务范围如下：

1.坝基岩体稳定、变形及基础处理措施。

2.大坝下游的防洪防冲和岸坡保护问题。

3.库岸滑坡涌浪问题及岸坡变形观测技术。

三、乙方的责任如下：

1.乙方应于 年 月份内派遣3名身体健康、能够胜任工作的专家来中国进行25天的技术咨询服务，派出技术咨询专家的名单应事先征得甲方同意。

2.乙方专家应到现场考察，并正确、全面地解答甲方人员提出的咨询问题，在离开中国前，向甲方提出咨询报告初稿，并在离开中国后一个月内提出正式咨询报告一式五份，报告内容应包括附件一所列内容，并用英文书就。

3.乙方的专家在中国进行技术咨询服务的时间为二十五个日历日(包括四个旅途日和三个周末日)，每周工作六天，每天工作八小时。

4.专家在中国工作期间应遵守中国的法律和工作地区的有关规定。

5.乙方将正式的技术咨询报告给甲方寄出后，应以电传通知甲方如下内容：报告寄出日期、邮单号。

6.技术咨询报告如在邮寄途中丢失，乙方接到甲方通知后立即免费补寄。

四、甲方的责任范围：

1.考虑到本协议第二、三条所规定的乙方所提供的咨询服务，甲方支付给乙方一笔总费用，其金额为 美元(大写 美元整)。

2.为乙方3名专家提供在中国境内食、宿及工作需要的交通。

3.提供工作必须的技术资料、图纸和技术文件。

4.提供在中国工作所需的翻译人员。

5.协助办理专家出入中国签证和在中国居留、旅行手续并提供方便。

五、费用的支付

1.本协议书的费用以美元支付。

2.本协议总金额25%，计××美元，在乙方派出的专家到北京后，甲方凭收到下列单据，经审核无误后3天内通过北京中国银行和×国商业银行向乙方支付。

a.××发展有限公司北京办事处出具的以甲方为受益人金额为协议总金额25%计(美元)不可撤销的保证函正副本各一份(保证函格式见本合同第二号附件)。

b.商业发票正本一份、复印本五份。

3.本协议总金额75%，计××美元在乙方完成技术咨询服务并提交正式的技术咨询报告后，甲方凭收到下列单据，经审核无误后不迟于 天通过北京中国银行和×国商业银行向乙方支付。

a.商业发票正本一式六份。

b.即期汇票一式两份。

c.邮寄正式技术咨询报告的邮单或空运单一式两份。

六、凡在中国以外所发生的一切银行费用由乙方承担。在中国发生的一切银行费用由甲方承担。

七、双方应对互相提供的一切资料给予保密，未经对方书面同意不得向第三者透露。

八、税费

1.中国政府根据现行税法对甲方课征有关执行本协议的一切税费，由甲方支付。

2.中国政府根据现行《中华人民共和国个人所得税法》对乙方课征有关执行本协议的一切税费由乙方支付。

3.中国境外课征有关执行本协议所发生的一切税费将由乙方支付。

九、甲方和乙方在执行协议中发生的一切争执应通过双方友好协商解决。

十、执行本协议的一切文件与资料应以英文书写并采用公制。

十一、本协议书经双方签字后需经中国政府批准才能生效。本协议以英文写成一式两份，双方各执一份，具有同等效力。

十二、双方法定地址

中国 公司

地址：

电传：

×国 公司

地址：

电传：

甲方代表签字： 乙方代表签字：

中国 公司 ×国 公司 附件

××发展有限公司北京办事处

不可撤销的保证函(格式)

受益人：中国 公司

1984年 月 日

关于贵公司与×公司(以下简称乙方)于 年 月 日签订的总金额为 美元的第 号协议书(以下简称协议书)，我办事处愿对乙方向贵公司完全履行上述协议所规定的义务负责下列保证责任：

我们保证责任范围为上述协议总金额的25%即 美元，如果贵公司书面通知乙方未能按照上述协议规定向贵公司履行协议义务而要求退款时，我办事处在接到上述通知后3天内，无条件地将贵公司按上述协议书第五章第二条规定已支付给乙方的金额计 美元整退还给贵公司，本保证函自即日起生效，有效期到乙方全部履行本协议义务之日终止。

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

甲方：_________________

乙方：_________________

依据《中华人民共和国民法典》和有关法规的规定，乙方接受甲方的委托，就_________________等事项，双方经协商一致，签订本合同，信守执行：

一、委托事项

甲方委托乙方为其公司进行________________。

二、委托设计费用

设计费用总共为：人民币_______________元，(大写：____________元整)。

三、付款方式

1.甲方需在合同签订时付设计费人民币_______________元，(大写：____________元整)。

2.乙方将设计制作正式稿及电子文档交付甲方时，甲方需付设计费人民币_______________元，(大写：____________元整)。

四、乙方设计作品的时间、交付方式

1.乙方需在双方约定的时间内完成设计方案。因甲方反复提出修改意见导致乙方工作不能按时完成时，可延期执行，延期时间由双方协商确定。

2.乙方以彩色打印稿和光盘电子稿的方式交付设计的作品。

五、知识产权约定

1.甲方在未付清所有委托设计费用之前，乙方设计的作品著作权归乙方，甲方对该作品不享有任何权利。

2.甲方将委托设计的所有费用结算完毕后，甲方拥有作品的所有权、使用权和修改权。

六、双方的权利义务

甲方权利

1.甲方有权对乙方的设计提出建议和思路，以使乙方设计的作品更符合甲方企业文化内涵。

2.甲方有权对乙方所设计的作品提出修改意见。

3.甲方在付清所有设计费用后享有设计作品的所有权、使用权和修改权。

甲方义务：

1.甲方有义务按照合同约定支付相关费用。

2.甲方有义务提供有关企业资料或其他有关资料给乙方。

乙方权利：

1.乙方有权要求甲方提供有关企业资料供乙方设计参考。

2.乙方有权要求甲方按照合同约定支付相应款项。

3.乙方对设计的作品享有著作权，有权要求甲方在未付清款项之前不得使用该设计作品。

乙方义务：

1.乙方需按照甲方的要求进行作品设计。

2.乙方需按照合同约定按时交付设计作品。

七、违约责任

1.甲方在设计作品初稿完成前终止合同，其预付的费用无权要求退回;甲方在乙方作品初稿完成后终止合同的，应当支付全额的设计费用。

2.乙方如无正当理由提前终止合同，所收取的费用应当全部退回给甲方。

八、合同生效

本合同一式两份，甲乙双方各持对方签字合同一份，具有同等法律效力。

甲方：______________

甲方代表签名：_______________

日期：______________

乙方：______________

乙方代表签名：_______________

日期：______________

技术转让合同3

合同编号:  科技合字(  )第  号

项目名称:____________________________

技术受让方:                (公章)

(甲方)

技术转让方:                (公章)

(乙方)

中 介 方:                (公章)

合同登记机关:               (公章)

签订日期:  年  月  日

合同

履行期限:  年  月  日至  年  月  日

┌──────────┬──────────────────────┐

│ 研制单位(个人) │                      │

├──────────┼──────┬─────────┬─────┤

│研制完成时间    │ 年 月 日│ 主要研制人员  │     │

├──────────┼──────┼─────────┼─────┤

│专利申请号     │      │ 专利批准号   │     │

├──────────┼──────┼─────────┼─────┤

│专利申请时间    │ 年 月 日│ 专利批准时间  │年 月 日│

├──────────┼──────┴─────────┴─────┤

│专利权的有效期限  │ 年  月  日至  年  月  日    │

└──────────┴──────────────────────┘

一、发明创造名称和内容:

二、实施许可的范围、期限和方式:

三、技术情报和资料及其保密事项:

四、技术服务的内容:

五、履行合同的计划、进度、期限、地点和方式:

六、验收的标准和方法:

七、成交金额与付款时间、付款方式:

一次总付:

分次总付:

按利润或销售额提成  %  时间:

其它方式:

八、中介方的义务和责任及收取中介服务费比例和支付方式:

九、后续改进的提供与分享:

十、违约责任:

十一、争议的解决办法:

十二、名词和术语的解释:

┌─┬──────────┬───────┬────────────┐

│ │          │ 地  址  │            │

│技│   (公章)   ├───────┼────────────┤

│术│          │ 电  话  │            │

│受│          ├───────┼────────────┤

│让│法定代表人:    │ 帐  号  │            │

│方│          ├───────┼────────────┤

│ │          │ 开户银行  │            │

├─┼──────────┼───────┼────────────┤

│ │          │ 地  址  │            │

│技│   (公章)   ├───────┼────────────┤

│术│          │ 电  话  │            │

│转│          ├───────┼────────────┤

│让│法定代表人:    │ 帐  号  │            │

│方│          ├───────┼────────────┤

│ │          │ 开户银行  │            │

├─┼──────────┼───────┼────────────┤

│ │          │ 地  址  │            │

│中│   (公章)   ├───────┼────────────┤

│ │          │ 电  话  │            │

│介│          ├───────┼────────────┤

│ │法定代表人:    │ 帐  号  │            │

│方│          ├───────┼────────────┤

│ │          │ 开户银行  │            │

├─┼──────────┴───────┴────────────┤

│鉴│ 意见:                            │

│证│                   经办人:        │

│单│    (公章)                       │

│位│                     年  月  日   │

├─┼───────────────────────────────┤

│公│ 意见:                           │

│证│                   经办人:        │

│机│    (公章)                       │

│关│                     年  月  日   │

└─┴───────────────────────────────┘

〔说明〕

1.“合同类型”一项要写明专利实施许可合同,并注明是普通实施许可合同、排他实施许可合同或者独占实施许可合同。

普通实施许可合同是最常见的专利实施许可方式。指转让方许可受让方在一定范围内实施转让方所有或者持有的专利所订立的合同。

排他实施许可合同,是转让方和受让方约定分享专利实施权的协议。转让方不得在已许可受让方实施专利的范围内,就该项专利与第三方订立专利实施许可合同,但可以保留实施该项专利的权利。

独占实施许可合同,是转让方将专利实施权移交受让方所订立的协议。转让方不得在已许可受让方实施专利的范围内,就该项专利与第三方订立专利实施许可合同,自己也不得实施该项专利。

2.在“实施许可的范围、期限和方式”一项,如果转让方许可受让方向第三方分售专利实施许可时,应约定分售的条件及有关事项。没有约定时,应视为受让方在整个的专利权存续期间实施专利,不受地区和方式的限制,但不得与第三方订立专利实施许可合同。

3.“技术服务项目”一项,指转让方派出专业技术人员进行技术指导的项目、内容、工作期限和有关事项。

4.“后续改进的成果分享”一项应规定在合同成立以后,双方在原有专利基础上加以改进所完成的新的技术成果是否向对方提供,以及如何互惠使用。

出租方： (以下简称甲方)

承租方： (以下简称乙方)

甲、乙双方经过公开协商，在平等自愿、公平基础上，就乙方租赁甲方房屋(土地)的有关事宜，订立协议如下：

1、乙方租赁甲方位于姚辛庄存多维钢构西侧的房屋(64间)及土地60亩用于存放物品及开办市场使用。

2、租赁期限为十年，自20xx年起至20xx年_____月____止。

3、租赁价格及给付方式为：房屋租赁费用为每间每月150元人民币，土地租赁价格分段计价，前五年为每亩每年2万人民币。第六年每亩220xx元，第七年每亩24200元，第八年每亩26620元，第九年每亩29282元，第十年每亩32210元。费用采取上交方式，在每一年度的前一个月内缴纳。

4、租赁场地内地泵一个作价人民币10万元，转让给乙方，在合同签订后将转让费及时给付甲方。

5、租赁期间，乙方必须依法自主经营、自负盈亏，出现事故自行处理，自主承担，与甲方无关。

6、双方租赁合同为整体租赁，涉及现有租户处理事宜由双方协商办理。

7、租赁期间发生的水电、卫生费每年3万元由村里收取费用均由乙方承担，并不得因此给甲方造成妨碍和损害，否则乙方应承担违约责任。

8、在租赁期间，乙方需增建建筑物_______平米甲方应书面同意，以后未经甲方同意乙方不得私自搭建地上物(乙方所建房屋能取得地方政府同意除外)。

9、在租赁期间遇国家有征占用地，对于乙方经过甲方同意建设的地上物和堆积物品的搬迁补偿费用归乙方所有，对于原有固定物、可得利益、土地补偿等归甲方，即谁投资谁受益。

10、对于甲方的水电房设施及时维修和维护，付款方式为前五年每年为房64间×150×12月=115200元;土地60亩前四年为每年60亩×20xx0元=120xx00元;两项总计：每年1315200元。五年以后每年每亩累计递增10%。第六年每亩220xx元、总计_______;第七年每亩24200元、总计_______;第八年每亩26620元、总计_______;第九年每亩29282元、总计_______;第十年每亩32210元、总计_______。

11、经甲乙双方协商同意用甲方的2间厨房和2间泵房换楼上东侧2间办公室归甲方留作办公用。

12、注意防火、防盗，严禁斗殴，不得用煤做饭取暖，杜绝一切安全隐患，积极配合乡镇工作。

13、如遇政府用地、占地，此合同自行终止，不得以各种手段向甲方提无理要求。

14、本合同一式四份，双方各持两份，具有同等的法律效力。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

技术合同：国家基础地理信息数据使用许可协议

本使用许可协议赋予使用方仅享有本协议所明确规定的国家基础地理信息数据的使用权。提供方保证，提供方是国家基础地理信息数据的法定授权提供者，并被授权具体行使国家基础地理信息数据的版权及相关权利。本许可协议为不可转让和非独占的。本许可协议由许可协议文本和附表组成。

1.使用方必须遵守以下规定：

(1)使用方仅限于在本单位(本单位以使用方构成独立法人资格的组织为限)的范围内使用国家基础地理信息数据，不得扩展到所属系统和上级、下级或者同级其他单位。但获得特别许可的除外。

(2)使用方必须在使用国家基础地理信息数据所形成的成果的显著位置注明国家基础地 理信息数据版权所有者(所有者名称见附表)。

(3)使用方对被许可使用的国家基础地理信息数据不拥有复制、传播、出版、翻译成外国语言等的权利，不得向第三方提供原始国家基础地理信息数据。未经提供方允许不得将基于国家基础地理信息数据开发和生产的成果向第三方提供，但向中央国家机关、省级政府等部门提供用于宏观决策和社会公益事业的除外。国家基础地理信息数据的任何格式或者任何复制品视同原始数据。使用方可根据需要对数据内容进行必要的修改和对数据格式进行转换，但未经许可，不得将修改、转换后的数据对外发布和提供，并应将修改、转换的情况及修改、转换的内容向提供单位备案。使用方不得将原始国家基础地理信息数据或者其衍生成果在计算机互联网上登载。

(4)使用方主体资格发生变化时，应向提供方重新提出使用申请，并需重新签订使用许可协议。

2.使用方必须根据国家基础地理信息数据的密级按国家有关保密法律法规的要求，采取有效的保密措施，严防泄密。

3.违约条款：

(1)使用方在使用国家基础地理信息数据过程中违反国家法律法规或者国家基础地理信息数据主管部门的规定，其使用权即无条件终止。

(2)使用方违反本协议的任何约定，提供方有权收回其所提供的国家基础地理信息数据及相关资料，使用方不能保留国家基础地理信息数据的任何拷贝或者使用基于该国家基础地 理信息数据开发的任何成果，并须赔偿因违约侵权给提供方造成的一切经济损失。

4.提供方所提供的国家基础地理信息数据及许可的用途等见附表。提供方在向使用方提供国家基础地理信息数据时，同时提供国家基础地理信息数据的相应数据说明和使用说明。

提供方不承诺对所提供的国家基础地理信息数据中可能存在的与现势的某种不一致或者缺陷进行修改。提供方不因该数据本身的瑕疵而对使用方所造成的任何后果承担任何责任。

提供方不接受任何条件的退货。使用方自己负责安装与使用。技术培训、技术合作、数据更新须与提供方另行签订协议。

5.本协议一式四份，具有同等效力，双方各持二份。

6.本协议未尽事宜，双方将协商解决。

提供方(盖章)：_________ 使用方(盖章)：_________

代表(签字)：_________ 代表(签字)：_________

_________年____月____日 _________年____月____日

签订地点：_________ 签订地点：_________

附件

使用许可协议编号：_________

┌───┬──────────────────────────────┐

│提供方│ │

├───┼──────────────────────────────┤

│使用方│ │

├───┴──────────────────────────────┤

│ 许可使用的 信息数据 │

├────┬──┬─────────────────────┬────┤

│数据名称│密级│ 地理范围 │数据格式│

├────┼──┼─────────────────────┼────┤

│ │ │ │ │

├────┼──┴────────────────┬────┼────┤

│数据内容│ │版权所有│ │

├────┼───────────────────┴────┴────┤

│特别许可│ │

共2页，当前第1页12