技术员聘用合同
甲方(养殖场):
法人代表:
乙方(聘用兽医):
一、聘用岗位和期限:甲方聘用乙方从事兽医技术员的工作。聘用期限一年,从 年 月 日起至 年 月 日止。
二、甲方职责和义务
1、甲方要在学习和工作上关心乙方,并负责乙方参加省、市业务部门组织相关技术培训的费用。
2、工作补贴:聘用期内甲方给予每月 元的工作补贴,每年发放一次。
三、乙方职责和义务
1、负责研究和指导责任规模场的畜牧业产业发展、动物重大疫病防控、畜产品质量安全监管和养殖场畜牧兽医服务等工作,并督促落实相关政策措施。
2、宣传《动物防疫法》、《农产品质量安全法》、《兽药管理条例》、《饲料和饲料添加剂管理条例》等法律法规和加强动物疫病防控等相关方针、政策、措施。并做好场内畜牧兽医技术员的培训工作。
4、指导规模场建立健全畜禽养殖档案和防疫制度,完善动物重大疫病防治、饲料兽药使用情况等记录记载。重点是围绕动物疫病的免疫、消毒工作,摸清防疫工作中存在的问题,并及时解决。
5、责任规模场内一旦发生动物重大疫情或畜产品质量安全等突发事件,应立即赶赴现场,督促和指导养殖场按应急预案规定进行及时处置,并查明原因。
四、落实好安全保障措施:乙方在工作期间,做好自我保障措施,确保安全,如发生意外事故,均由乙方自身负责,甲方不承担任何法律和经济责任。
五、本协议一式三份,本养殖场执两份,聘用人员执一份。
甲方: (盖章) 乙方(签名盖章):
公正机关(代表)签名:
协议订立日期: 年 月 日
更多相似范文
篇1:技术培训服务标准合同书
项目名称:____________
委托方:____________ (甲方)
服务方:____________ (乙方)
签订地点:____________
签订日期:____________
有效期限:____年____月____日至____年____月____日
依据《中华人民共和国民法典》的规定,合同双方就 项目的技术服务(该项目属____________计划),经协商一致,签订本合同。
一、服务内容,方式和要求:
(属技术培训合同应当填写培训内容和要求、培训计划、进度;属技术中介合同应当填写中介内容和要求)
二、※工作条件和协作事项:____________ 。
三、履行期限、地点和方式:____________ 。
四、验收标准和方式:____________ 。
技术服务或者技术培训按 标准,采用 方式验收,由 方出具服务或者培训项目验收证明。
本合同服务项目的保证期为 。在保证期内发现服务质量缺陷的,服务方应当负责返工或者采取补救措施。但因委托方使用,保管不当引起的问题除外。
五、报酬及其支付方式:
(一)本项目报酬为(服务费或培训费):____________元。
服务方完成专业技术工作,解决技术问题需要的经费,由____________方负担。
(二)本项目中介方活动费为:____________元,由 _____方负担。
中介方的报酬为:______元,由____方支付。
(三)支付方式(按以下第____种方式):
① 一次总付:____元,时间:____________
② 分期支付:____元,时间:____________
____元,时间:____________
③其它方式:____________
六、违约金或者损失赔偿额的计算方法:
技术服务违反本合同约定,违约方应当按技术民法典实施条例第九十八条、第九十九条规定,承担违约责任。
技术培训违反本合同约定,违约方应当按技术民法典实施条例第一百零五条、第一百零六条规定,承担违约责任。
技术中介违反本合同约定,违约方应当按技术民法典实施条例第一百一十二条、第一百一十三条、第一百一十四条规定,承担违约责任。
(一)违反本合同第 条约定, 方应承担违约责任,承担方式和违约金额如下:
____________________________________________________________
(二)违反本合同第 条约定, 方应承担违约责任,承担方式和违 约金额如下:
____________________________________________________________
(三)____________________________________________________________
七、争议的解决办法:
在合同履行过程中发生争议,双方应当协商解决,也可以请求 进行调解。
当事人不愿协商、调解解决或者协商、调解不成的,双方商定,采用以下第 种方式解决。
(一)因本合同所发生任何争议,申请 仲裁委员会仲裁;
(二)按司法程序解决。
八、其它(含中介方的权利、义务、服务费及其支付方式、定金财产抵押及担保等上述条款未尽事宜):①
委托方甲方
名称(或姓名):_________(签章)
法定代表人:_________(签章)
委托代理人:_________(签章)
联系人:_________(签章)
住所:_________(通讯地址)
电话:_________
传真:_________
开户银行:_________
帐号:_________
邮政编码:_________
服务方乙方
名称(或姓名):_________(签章)
法定代表人:_________(签章)
委托代理人:_________(签章)
联系人:_________(签章)
住所:_________(通讯地址)
电话:_________
传真:_________
开户银行:_________
帐号:_________
邮政编码:_________
中介
单位名称:_________(签章)
____年____月____日
法定代理人:_________(签章)
委托代理人:_________(签章)
联系人:_________(签章)
住所:_________(通讯地址)
电话:_________
传真:_________
开户银行:_________
帐号:_________
邮政编码:_________
篇2:技术研发与市场营运合同范本_合同范本
合同(或合约)(covenants),是双方当事人基于对立合致的意思表示而成立的法律行为,为私法自治的主要表现,意指盖印合约中所包含的合法有效承诺或保证。本文是关于技术研发与市场营运合同范本,仅供大家参考。
甲方: ___________________
法定代表人:_______________
乙方: ___________________
法定代表人:_______________
根据《中华人民共和国合同法》的有关规定,经甲乙双方友好协商,本着长期平等合作,互利互惠的原则,为实现技术研发与市场营运的直接联盟,创造良好的经济效益和社会效益,达成以下协议:
一、合作宗旨
促进科学技术产业化的发展,充分利用甲方广泛的市场资源优势和发挥乙方科研平台能力,实现技术研发与市场营运的直接联盟。
二、合作范围
1.多媒体软件,硬件的开发。
2.it产品的市场营销。
3.网络工程。
4.网络营运。
三、合作方式及条件
1.甲方以现有的市场营销网络及社会资源为基础,更进一步的开发市场潜力,逐步形成一个规范化,全国性的营销网络。
2.甲方根据社会需求,收集和承接企业应用软,硬件的开发项目。
3.乙方利用强大的技术开发力量,开发甲方新承接或者甲,乙双方共同确立的项目。
4.乙方应配合甲方做好技术咨询及在开拓业务进程中提供技术支持。
四、权力义务
1.属于甲,乙双方共同策划, 共同开发的项目,其所有权属于甲,乙双方共同拥有。
2.属于乙方单方承接的开发项目,其所有权属于乙方拥有。
3.在双方合作过程中,甲、乙双方无权干涉对方企业内部管理。
4.双方应以诚信为本,互相交流和切磋业务动作状况, 以便互相促进。
五、利益分配
1.属于双方共同开发的系列产品,由双方协商市场价,按税后利益的 _____% 比例分成,此分成比例可每半年调节一次,根据合作情况协商调整。
2.属于乙方单方开发的产品,甲方如有兴趣合作,可在双方协商后,另外确定合作方式和分成方式。
六、共同开发项目的成果归属与分享
1.一方转让其有专利权的,另一方可以优先受让其共有的专利权。
2.合作各方中,单方声明放弃 专利申请权的,可由另一方单独申请。
3.开发项目被授予专利以后,放弃专利申请权的一方可以免费取得该项专利的普通实施许可,该许可不得撤消。
4.一方不同意申请专利的,另一方不得单方申请专利。
5.在特殊情况下,当事人各方还可以在合同中规定对技术成果权的分享份额以及各自享有的专利申请权,将对在技术开发的各主要阶段产生的研究开发成果,约定各自独立享有的权利。
七、保密条款
1.甲、乙双方所提供给对方的一切资料,专项技术和对项目的策划设计要严格保密,并只能在合作双方公司的业务范围内使用。
2.甲、乙双方公司的全部高级职员,研发小组人员将与合作公司签订保密协议,保证其在就业期间和研发期间所接触的保密资料,专项技术予以保密。
3.凡涉及由甲、乙双方提供与项目,资金有关的所有材料,包括但不限于资本营运计划,财资情报,客户名单,经营决策,项目设计,资本融资,技术数据,项目商业计划书等均属保密内容。
4.凡未经双方书面同意而直接,间接,口头或者书面的形式向第三方提供涉及保密内容的行为均属泄密。
八、其它
1.甲、乙双方在执行本合同时发生争议,可通过双方友好协商解决,若经双方调解无效,可向有关仲裁机构提请仲裁。
2.本协议未尽事宜,双方协议订补充协议,与本协议同样具有法律效应。
3.本协议一式两份,双方各执一份。
4.本协议经双方签章生效。
甲方:___________________
地址:___________________
法定代表:_______________
签定地:_________________
签定时间:_______________
乙方:___________________
地址:___________________
法定代表:_______________
签定地:_________________
签定时间:_______________
篇3:实验室技术合作协议
甲方:
住址:
法人代表:
身份证号:
乙方:
住址:
法人代表:
身份证号:
甲、乙双方本着优势互补、互惠互利的原则,就开展实验室技术合作事宜,达成如下协议:
一、合作原则
互相尊重,自愿互利,公平开放,充分发挥各方的优势和特色,不断拓宽合作领域、提高合作水平,形成合作互动、优势互补、互利共赢。
二、合作领域
_______________________________________________________________________________________________________________________________________________________________________。
三、合作方式
1、甲方提供________________________________________________________。
2、乙方提供________________________________________________________。
3、合作期限:_______年_______月_______日至_______年_______月_______日。
四、甲方权利义务
1、甲方全面负责试验技术开展进行。
2、对于乙方提供的仪器设备,甲方具有使用权,期间仪器维护、维修检定费用由甲方承担。
3、甲方负责_______质量安全的相关检验项目,对于乙方提出的其它检验要求,甲方视情况按照市场标准进行收费。
4、甲方每年提供4万元资金折抵乙方设备的折旧费用,超出部分由乙方负担。
5、甲方接受乙方委托的检验时,检验费用按照市场标准的_______%进行收取。
五、乙方权利义务
1、乙方可以对实验室技术的情况进行监督检查。
2、乙方可以要求甲方提供检验项目计划以及检验费用明细,并对其监督。
六、合同变更、解除、续展、终止
1、各方协商一致,可以变更或者解除本合同。
2、本合同期限到期前_______个月,由乙方向甲方提出续签合同申请,并提交申请报告,接受甲方审查。审查合格后,方可获得下一时期的合作资格,本合同期满后自然终止。
3、乙方未经甲方书面同意,不得将本合同项下的任何权利和义务转让给本合同外他方。
七、不可抗力
由于不可抗力致使本合同全部或者部分不能履行的,甲乙双方互不承担责任。
八、争议解决
因本合同引起的或与本合同有关的任何争议,双方应努力通过友好协商方式解决。如果双方无法就争议的解决达成共识,则该争议应提交_______法院诉讼解决。
九、其它
1、本合同适用中华人民共和国法律及有关规定。
2、本合同未尽事宜,双方另行签订补充协议。
3、本合同的任何修改或补充须经双方协商并签署书面合同确认。
4、本协议一式_______份,双方各执_______份,自双方签字盖章之日起生效。
甲方:(签章)
地址:
联系方式:
签约日期:________年_______月_______日
乙方:(签章)
地址:
联系方式:
签约日期:________年_______月_______日
篇4:云南某级公路第合同段工程技术承包合同
甲方: (身份证号 )(以下称甲方) 乙方: (身份证号 )(以下称乙方)
为优质、高效完成织纳高速公路房建项目合同段工程的施工任务,充分发挥各方优势,经甲乙双方平等协商,甲方将织纳高速公路房建项目合同段的工程技术资料编制工作交由乙方完成,双方达成以下协议:
一、 合作项目工程概况
1.1 项目名称:织纳高速公路房建项目
1.2 项目工程总造价: 元(大写: 元)
二、 协议范围
2.1 工程施工复测资料编制。
2.2 工程施工放样资料编制。
2.3 工程试验资料编制。
2.4 工程质检资料编制。
2.5 工程计量资料编制。
2.6 工程变更资料编制。
2.7 工程施工技术资料编制。
2.8 工程竣工资料编制。
三、 协议工期
3.1 从甲方通知乙方人员进场开始至工程交工为止。
3.2 双方拟定合作时间为 个月,即从20xx年5月6日至 年 月 日,工期共 个月,协议工期暂定总日历天数 天。
3.3 以上协议工期,包括施工复测时间、雨季及因建设方、甲方等原因造成工程停工的时间,不包括工程竣工资料编制时间。
3.4 若因建设方、甲方及雨季等原因工程无法完成,乙方不负任何责任。
3.5 如工期超出 个月,甲方应支付乙方超出工期的工程延期费用(详见4.2条)。
四、工程技术资料编制费用
4.1 工程技术资料编制费用:按织纳高速公路房建项目合同段工程实际工程总造价的1.2%(大写:百分之一点二)计算。
4.2 工程延期费:因乙方以外的原因造成乙方在该协议工期( 月)内无法完成协议范围的资料编制,从超出协议工期后第一个月起至该工程交工,甲方在该工程总造价的1.2%以外按平均每人每月8000元(大写:八千元)人民币支付给乙方作为超期费用(乙方技术人员暂定为八人)。
五、双方的一般责任
5.1 甲方的全权代表及甲方的责任
5.1.1 甲方全权代表姓名: (身份证号 )。
5.1.2 若甲方更换协议代表人,应提前15天以书面形式通知乙方,甲方后任代表人继续承担前任代表人应负的责任。
5.1.3 遵守该合同中包含的条款,对本工程履行甲方的义务和权利。 5.2 甲方的工作
5.2.1 向乙方免费提供食宿及办公场所。
5.2.2 甲方提供材料检验、试验产生的费用。
5.2.3 甲方现场施工人员必须配合乙方工作,隐蔽工程隐蔽之前甲方必须通知乙方到现场做记录,若甲方不能及时通知乙方,则甲方的现场管理人员必须做好隐蔽记录并转交给乙方,以保证乙方编制相关资料。若隐蔽前甲方未通知乙方且甲方现场人员未做隐蔽记录,造成的后果乙方不负任何责任。
5.2.4 甲方负责协调与监理、业主之间的关系,积极为乙方工作创造条件。
5.2.5 支付进度款:甲方按每期计量总额的1.2%支付给乙方。
5.2.6 负责工程变更的签证工作(乙方配合)。
5.2.7 负责协调参与竣工备案资料相关单位协调工作,并根据情况给予乙方补贴。
5.2.8 按照中华人民共和国《劳动法》的规定负责为乙方人员在中国人寿保险公司办理个人人身保险。
5.3 乙方的全权代表及乙方的工作
5.3.1 乙方全权代表姓名: (身份证号 )。
5.3.2 若乙方更换协议代表人,应提前15天以书面形式通知甲方,乙方后任代表人继续承担前任代表人应负的责任。
5.3.3 遵守该合同中包含的条款,对本工程履行乙方的义务和权利。
5.3.4 负责工程施工复测资料编制;工程施工放样资料编制;工程实验资料编制;工程质检资料编制;工程计量资料编制;工程变更资料编制;工程施工技术资料编制;工程竣工资料编制。
5.3.5 配合甲方负责隐蔽工程的验收并完成相关资料编制。
5.3.6 配合施工现场的文明施工管理资料的收集工作。
5.3.7 按照该协议完成协议范围内的资料编制及协助甲方完成工程变更的签证工作。
5.3.8 负责按工程进度及时做好计量工作。
5.3.9 负责该协议范围内的资料及变更资料的保管,待交工验收后统一移交给甲方。
5.3.10 乙方技术人员必须遵守执行甲方的一切规章制度。
六、资料编制费用的支付方式
6.1 乙方各专业人员进驻现场后,甲方即支付80000元(大写:八万元)人民币给乙方作为进场启动资金。
6.2 工程资料编制费用:甲方按每期计量总额的1.2%支付给乙方。甲方在该工程现场施工结束、资料编制完成后30天内付清剩余该工程技术资料编制费用给乙方。
七、双方违约责任
7.1 甲方在每期计量工作结束后 15 天内支付乙方进度款,如因甲方未按时支付乙方进度款造成乙方工作无法进行及乙方的一切损失,由甲方负责。
7.2 甲方在该工程交工验收后30天内付清剩余该工程技术资料编制费用。甲方可暂扣留乙方15万元待竣工备案资料完成后10天内支付给乙方。
7.3 乙方因自身原因未按时上交资料或经过反复修改仍不合格,将支付 元给甲方。
7.4 结算上报金额与审定金额之间的差额产生的审计费用及产生的处罚乙方不承担任何责任。
7.5 甲、乙双方按以上各条款执行,或双方协商解决,协商不成,双方约定交由有相应管辖权的人民法院处理。
7.6 该协议签定后甲、乙双方在其中一方不同意的情况下不得废除该协议,否则将赔偿对方一百万作为违约金。
本协议一式八份,甲、乙双方各执四份,自签定之日起生效,其中任何一份都具有法律效力。
甲方(章或手印): 乙方(章或手印):
法定代表人: 法定代表人:
联系电话: 联系电话:
合同签订地:
签订日期: 年 月 日 签订日期: 年 月 日
篇5:国际技术服务合同_合同范本
国际技术服务合同
在___注册成立的___公司(以下简称甲方)和中国___公司(以下简称)、于___年___月___日签订本技术服务合同:
第一条
1. 应甲方邀请,乙方同意派遣___名工程师组成的中国技术服务组。于___年___月___日赴___(甲方国名)的___(市)(或某工地);
2. 在___(甲方国名),受甲方邀请的乙方中国技术服务人员应有准备,并且愿意同___甲方的___公司共同工作。
第二条
乙方人员在___(甲方国名)期间,应服从甲方国家的法律,受甲方的管理规章制度约束。
第三条
1.(1)甲方负责向乙方人员支付乙方提出的每个每月___(币别)的免税技术服务费。
(2)上述免税技术服务费的___%应以美元(或英镑)支付。
(3)本条(1)款提及的技术服务费自乙方人员到达___(甲方国名)之日起开始计算。
2.(1)在甲方服务期间,乙主人员在工作或业余的全部时间内,应保证行为端正。
(2)甲方对乙方人员在甲方服务期间的犯罪行为不承担责任。
第四条
甲方负担乙方人员往返中国和___(甲方国名)的国际旅费和第人不超过20公斤的超重行李费,并负责安排机票。
第五条
1. 第三条1(1)款中所提的技术服务费的___%应以___币(即甲方的国币)支付给在___的中国技术服务组,其余___%应由甲方按银行当日公布的况率折成美元(或英镑)。
2. 所折成的美元(或英镑)应电汇___(如伦敦)中国银行转汇北京(或其它中国城市)中国银行营业部___公司(即乙方公司)___号帐户。
3. 甲方应以书面形式将汇款情况通知中国驻甲方国大使馆经参处。
第六条
甲、忆双方执行合同期间,甲方同意:
1. 为乙方技术服务组人员免费提供设备齐全的住宿;
2. 为乙方技术服务组人员免费提供交通工具;
3. 免费提供乙方必要的充分的劳保用品;
4. 为乙方技术人员免费提供人寿保险;
5. 为乙技术服务人员免费提供足够的办公设施和用品;
6. 在指定的医院或诊所为技术服务组人员提供免费医疗,但不包括镶牙、配镜和性病的治疗。
7. 乙方技术服务组人员因公出差,应按照甲方人员待遇,发给出差补助费,以___币(甲方国币)支付给乙方技术服务。
第七条
合同期间,乙方技术人员享受中___(甲方国名)两国的全部公共假日。
第八条
1. 乙方人员第年享受三十天的休假,工资照发(从开始工作之日起算起工作十一个月,第十二个月为休假)。休假期间工资应全部以美无(或英镑)支付。
2. 乙方技术人员每年应得___元(甲方国币)的奖金,奖金的___%以美元(或英镑)支付。
3. 在甲方服务期间,甲方为乙方技术人员回国休假提供往返经济舱机票。
第十条
在合同期间内,乙技术人员由于家庭不幸和/或其它原因,可请紧急事假十天。
1. 准予乙方人员事假时,甲方不负责:
(1) 乙方事假人员旅费;
(2) 本合同第三条1(1)款中所规定的技术服务费;
(3) 因乙方人员事假期满后不能返回___(甲方国名)而换人时所需费用。
3.(1)在合同期间内,由于甲方或所在国原因,致使乙方人员不能工作时,甲方同意:向乙技术人员支付双方同意的技术服务费(见第三条1(1)款);
(2)因甲方原因终止合同、甲方违反合同或阻挠合同履行时,甲方同意:
a、 按合同规定费用,向乙方人员支付三个月的技术服务费(见第三条1(1)款):
b、 执行本合同第四条的规定。
第十一条
1. 乙方技术人员因身体不好或工伤,在两个月内不能痊俞时,乙方同意:
(1) 从中国另行派人替换上述人员;
(2) 承担替换人员从中国到___(甲方国名)的旅费。
(3) 甲方同意承担因病或工伤返回中国人员因工伤致残或死亡,甲方同意:
2、在合同期间内,技术服务组人员工伤致残或死亡,甲方同意:
(1) 处理事故,工伤或死亡的一切善后事宜;
(2) 负担所产生的费用;
(3) 按___(甲方国名)现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。
第十二条
本合同未尺事宜,由双方通过友好协商解决。
双方对本合同的解释如有不同意见,发生分歧和争执,或由本合同产后或与本合同有关的其它事项,应根据___(甲方国名)的现行法律,提交双方均能接受的唯一仲裁解决。
第十三条
本合同的执行从___年___月___日开始,有效期限共___年,此为经一阶段___年合同期满后,双方应进一步商定延续合同期限和与之有关的条件。
第十四条
本合同共两份,分别用中、___文写成,双方各执一份。两种文本具有同等效力,并对双方均有约束力。
甲乙双方于上述日期签字盖章为证。
甲方签字人:______
甲方公司名称:______
见证人姓名:______
地址:______
职务:______
签名:______
乙方签字人:______
乙方公司名称:______
见证人姓名:______
地址:______
职务:______
签名:______
篇6:医药卫生行业涉外劳动技术服务合同
甲方:
法定地址:
电话:
乙方:
法定地址:
电话:
第一条
根据甲方的愿望,乙方同意派遣中国工程师、技术工人、行政人员(翻译、厨师)在_国工作。具体人数、工种、工龄和月工资详见本合同附件(略)。该附件为本合同不可分割的组成部分。
第二条
乙方人员出入中国国境和过境手续,由乙方负责办理,并负担其费用。乙方人员出入_国国境的签证和在_国境内所需办理的居留、劳动许可证等手续,由甲方负责办理并负担其费用。
第三条
1.乙方人员在_国工作期间,由甲方按本合同的规定向乙方人员支付每月的工资。
2.凡工作不满1个月的乙方人员,按下列公式计算:不满1个月工资月的工资=--×工作天数(包括周日和官方假日)30天
3.上述工资应以乙方人员到达_国之日起到离开_国之日止计算。
4.乙方于每月末将乙方人员该月的工资,包括加班费,列具清单提交甲方,甲方于清单开出之日起3天内按清单所列金额的75%以美元支付,并按当天牌价电汇给北京中国银行总行营业部中国 公司 账户,并按 国 银行的规定负担其手续费。同时书面通知中国驻 国大使馆经济参赞处。
5.甲方将乙方人员月工资和加班费的25%以 国 货币支付并汇给中 国驻国大使馆经济参赞处在 银行 账户。
第四条
甲方负责乙方人员从 到 的旅费,并负责将此费用汇到上述乙方账户。乙方人员从 返回 ,由甲方通过 航空公司向乙方人员提供机票。甲方负责乙方人员只限往或返单程的行李超重费,其重量为20公斤。
第五条
1.甲方负责乙方人员的住宿费,在工作时间和加班时间提供从居住地到工地的交通工具,负责国营医院的医疗费。
2.乙方人员的工资和加班费不交所得税。
3.甲方为乙方人员在_国家保险公司投保生命保险。其保险费每人为(货币及数量) 。
4.甲方向乙方人员提供工作服和工作所需的工具。
5.甲方提供的住房,包括水、电、空调和必要的家具、床和床上用品。
6.乙方人员的居住面积如下:
(1)组长、工程师、技术员、行政人员为8~10平方米;
(2)其余人员为4~5平方米。
7.甲方向乙方提供厨房所用的炊具和旨在自己用饭所需的餐具。
第六条
1.乙方人员每周工作6天,每天工作8小时。
2.根据工程需要,甲方需要乙方人员加班时,加班工资按下列比例计算:平时加班为日工资150%,周假日加班为日工资的200%。
第七条
1.乙方人员享受周日假和 国官方规定的节假日为17天。
2.乙方人员每年享受带薪休假30天。如乙方不愿享受上述假期或享受部分天数,甲方应向乙方提供报酬,其工资按下列方法计算:月工资--×假期工作天数。30天
第八条
1.根据总利益的要求,甲方有权在任何时间内终止本合同,在这种情况下乙方人员应享受3个月或本合同所余期限的工资,但以最短的时间为准。乙方人员将有权享受回 的机票。
2.在乙方愿望以外的原因而停工,如断电、断水、材料供应不足等,在停工期间甲方照付乙方人员的工资。但根据工作需要,甲方有权使其在其他项目上工作。
第九条
在紧急情况下,(乙方在国内其家庭人员死亡)甲方在得到乙方书面通知后,对有事人员给予2个月的紧急事假,并向其支付代替平时总假期的报酬。超过2个月的期限没有工资,对此乙方负责其旅费。紧急事假,超过2个月的时间,乙方应在2个月结束后的1个月内予以替换,并负责替换者的旅费。
第十条
1.乙方人员因工作生病或伤残,甲方在2个月内负责支付在_国内的医疗费和全部工资。如在2个月内不能痊愈,乙方应负责替换,在此情况下的1个月内甲方负责伤者回 的旅费和替换者来 的旅费。同样,甲方将根据 规定对伤病者给予补偿的各种措施。
2.在 期间,乙方人员如发生死亡,甲方应办理一切丧葬或遗体火化以及遗体或骨灰运回 的一切善后费用。还有行李及遗物运回的费用。如因工作而死亡,按照 国保护法的规定向死者家属支付抚恤金。
第十一条
1.乙方人员在 服务期间,应遵守_国现行法律和规章制度,要保守机密,不泄密,在其执行任务期间或合同结束以后不作有害甲方利益的事。乙方人员应尊重 当地的风俗习惯。
2.甲方应为乙方人员提供工作方便,不干涉其工作时间以外和住地内的社会活动自由,尊重乙方人员的生活习惯以及对推动工作的良好建议。
第十二条
1.服务期为 年,从乙方人员到达 地算起,其间包括乙方人员在 国内或国外所享受的假期。
2.本合同自签字之日起生效,有效期 年。期满根据甲方要求,经乙方同意可以延长。
3.当本合同延期后,乙方人员在工作 年后,月工资增长15%。
第十三条
1.乙方人员在工作期间,甲方有权撤换其不称职的任何人员,乙方并在甲方通知后的3个月内予以替换,不给任何费用。
2.在合同期内,乙方人员擅自放弃工作,将不给予机票待遇。但由于执行工作而生病,且有医疗证明者除外。
3.在本合同签字期间或签字后,凡乙方已在 的人员,不享受从 到 的机票。但甲方按本合同规定在工作结束时,负责其从 至 的旅费。
4.甲方不允许乙方人员在工作以外的时间干私活或任何方面的自行开业。
第十四条
1.自工作开始,甲方向乙方支付2个月的预付款,并在4个月内偿还。
2.乙方人员抵达 后, 国现行出差补贴规定适用于乙方人员。
第十五条
由于地震、台风、水灾、火灾、战争以及其他不能预见并且对其发生和后果不能防止或避免的不可抗力事故,致使直接影响合同的履行或者按约定的条件履行时,事故的一方应在15天内电报通知另一方,并提交由当地公证机关出具的有效证明,经双方协商决定后,可以免除或部分免除履行合同的责任,亦可商定补救办法的补充协议,以付诸实施。
第十六条
双方应严格遵守本合同的各项条款,任何一方或双方违约都必须承担责任,负责赔偿由此产生的一切经济损失。
第十七条
为保证本合同及其附件的履行,双方应相互提供履约合同的银行担保书,或协商约定其他形式的担保。
第十八条
除合同中另有规定外或经双方协商同意外,本合同所规定双方的权利和义务,任何一方未经另一方的书面同意,不得转让给第三者。
第十九条
双方对合同的内容及其实施负有保密责任。
第二十条
双方在发生重大情况变化时,可协商修改、补充乃至解除或终止本合同,但不影响当事人对于损失赔偿的请求权和合同关于解决争议条款的效力。
第二十一条
凡因执行本合同或与本合同有关事项所发生的一切争执,应由双方通过友好方式协商解决。如果不能取得协议时,则在被告国家根据被告国仲裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的,对双方具有同等约束力。仲裁费用除非仲裁机构另有决定,均由败诉一方负担。
第二十二条
甲方协助乙方在合同履行地聘请一名当地律师担任乙方的法律顾问,以协助和指导乙方履行合同和解决争议,其费用由甲方负担。
第二十三条
本合同的适用法律选择由双方协商同意的第三国实体法,并参照有关的国际公约和国际惯例。
本合同用中文和 文写成,两种文字具有同等效力。合同正本2份,双方各执1份;副本若干份。
本合同于 年 月 日由甲、乙双方的授权代表在 国 市签字。
甲方: 乙方:
代表: 代表:
职务: 职务:
签字 签字:
见证人:
篇7:2024技术服务协议书
1.乙方技术人员因身体不好或工伤,在两个月内不能痊俞时,乙方同意:
(1)从中国另行派人替换上述人员;
(2)承担替换人员从中国到___(甲方国名)的旅费。
(3)甲方同意承担因病或工伤返回中国人员因工伤致残或死亡,甲方同意:
2、在合同期间内,技术服务组人员工伤致残或死亡,甲方同意:
(1)处理事故,工伤或死亡的一切善后事宜;
(2)负担所产生的费用;
(3)按___(甲方国名)现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。
篇8:技术支持合同
甲方:
乙方:
付方式为: 。
双方责任详诉:
一、如乙方发现收到的品种与本合同规定或与以前提供的样品质量不相符时,乙方可换货或退货,运费按甲方给乙方发货时的相同运费由甲方承担,乙方退回品种如数量不足时按合同价向乙方扣出。如质量与甲方发出时有差异的不得退货。
二、乙方在承运单位接货时如发现数量不足或包装破损产生遗漏的,按实际情况说明让承运单位签字盖章并留下承运单位联系方式后,请立即与甲方沟通后方可接货,甲方方可承担遗漏损失。
三、本次货品发往 。
四、本次货品发至乙方时从合同生效之日起约为 天左右。
五、乙方在使用甲方提供的品种时,由甲方负责指导品种的使用方法及技术配料。
以上条款如无异议由双方盖章鉴字回传至甲方后生效,生效后甲方向乙方发出的品种如乙方没有符合本合同规定理由而拒收的,所产生的损失由乙方承担。
甲方(公章):_________ 乙方(公章):_________
法定代表人(签字):_________ 法定代表人(签字):_________
_________年____月____日 _________年____月____日
篇9:专利权技术转让合同
转让方:_________________________
受让方:_________________________
鉴于:“_________”关键技术(以下称“CDMA20__”或技术成果)系经过转让方长时间的开发和实际项目的应用,技术上已完全成熟并得到特种行业用户的肯定,且具有广大的市场前景:鉴于受让方在市场开拓方面的完整商务能力,为更好地将成果应用于社会和行业用户,转让方愿意将该项技术成果转让给受让方,且受让方同意接受该技术成果。现本协议双方经过详细磋商,依据我国现行、有效的有关法律、法规之规定,就技术成果转让事宜达成协议如下:
1.第三代CDMA20__移动通信基站射频子系统及CDMA20__移动通信系统基站线性化放大器关键技术(以下称“CDMA20__”或技术成果)是指:包括但不限于有关第三代CDMA20__移动通信基站射频子系统及CDMA20__移动通信系统基站线性化放大器关键技术的软件(组件)、技术档案和技术资料。“CDMA20__”后继开发技术成果是指:包括但不限于现有CDMA20__技术的后续开发及相关的技术档案和技术资料。 “CDMA20__”关联技术成果及其后继开发技术成果是指:与现有CDMA20__技术有关的其他技术成果及技术档案和技术资料,及在此基础上的后继开发及相关的技术档案和技术资料。
2.转让方于本协议生效日将本协议所涉技术成果独家转让与受让方。于该转让日起,受让方拥有技术成果的所有权,但法律规定禁止转让的权益除外。
技术成果的转让包括但不限于在技术成果的相关权利保护期内下列各项权利:
(1)使用权,即以复制、展示、发行、修改、翻译、注释等方式使用技术成果的权利;
(2)使用许可权和获得报酬权,即许可他人以前项中规定的部分或者全部方式使用其技术成果的权利和由此获得报酬的权利;
(3)修改权,即修改或者授权他人修改技术成果的权利;
(4)其它法律、法规规定所享有的权利。
3.转让方应于本协议生效日将所转让的技术成果全部内容的详尽资料交付于受让方
(1)该技术资料包括但不限于:___________________________________。
(2)转让方提交的上述技术资料,应使本行业内具有普通技术水平的专业人员能够理解,并能够在此基础上对软件进行修改、维护和再开发。
(3)转让方向受让方提交上述技术资料后,不得继续保留载有该软件任何实质部分的任何载体。
(4)该等资料应确保受让方能够便利地使用、享有、行使本协议第1条所述的技术成果及相关权利。
4.转让方声明并保证在本协议技术成果转让前
(1)所转让的技术成果真实、完整、合法、有效、属于其所有,不存在任何权属争议。
(2)转让方有权转让本协议所涉之技术成果,且技术成果未存有抵押、质押或其它担保等情形;
(3)转让方在本协议签订前并未将技术成果以任何方式许可或泄露给任何第三方使用或获得利益。
(4)除在本协议签订前已购得该技术成果的合法权利人外(如有)(以转让方提供给受让方的权利人名单为限),转让方并未将技术成果以任何方式许可或泄露给任何第三方使用或获得利益。
(5)转让方保证所提供的资料是完整、正确、清晰的并保证及时交付。
5.转让方声明并保证在本协议技术成果转让后
(1)非经受让方书面同意,转让方不以任何方式使用技术成果、授权他人使用技术成果、为他人非法使用技术成果提供任何条件。
(2)转让方应保证技术成果/著作的开发者和转让方及其具有雇佣关系的人员(以下合称雇员)和转让方的关联企业不使用、不许可他人使用技术成果、不为他人非法使用技术成果提供任何条件。如前述雇员或其关联企业有前列任何行为,转让方应就上述该等行为对受让方直接承担责任。
(3)转让方应就所转让的技术成果和技术成果使用者的有关情况以及其他与该技术成果市场有关的商业信息承担保密义务,上述保密义务同样适用于转让方雇员及/或关联企业。
6.受让方的承诺和保证
按本协议约定的转让金额在约定的付款时间内,全额支付给转让方。
7.转让方应就CDMA20__的关联技术给予受让方优先选择权,在同等条件下,受让方有优先购买权。
8.受让方应于本协议生效后三日内向转让方支付转让费人民币_________元整。
9.协议一方违约,应向另一方支付相当于全额转让费10%的违约金,如违约金不足以赔偿守约方因此所遭受的损失,违约方并应赔偿不足部分。
转让方未按第3条的要求向受让方提供资料,受让方有权要求转让方改正;至改正之日止,每逾期一日转让方应向受让方支付相当于全额转让费0.2‰的延期转让违约金。
10.协议一方有下列情形之一,另一方有权单方解除本协议,除执行上述第9条之约定外,并应返还从协议对方取得的的财产
(1)转让方违反第4条任何一项;
(2)未能履行前述第3、6条之约定;
(3)发生战争、自然灾害、政府行为等不可抗力,致使不能实现协议目的。
11.转让方应按受让方要求提供技术成果的技术培训、辅导等相关服务,直至受让方能够独立、正确地使用该技术成果。
12.因技术成果转让所需缴纳的有关费用,依法由各方承担。
13.本协议生效后,受让方基于本协议所涉之技术成果的后继开发、改进等技术成果的著作权及相关权利归受让方享有。
14.双方因履行本协议而提供之文件/资料作为本协议之附件,构成本协议的必要组成部分,与本协议具同等法律效力。
15.未尽事宜经协议双方协商一致并签订书面补充协议,该补充协议与本协议具同等法律效力。
16.因履行本协议而致之争议由双方友好协商解决,协商不成,提交人民法院裁决。
17.本协议一式_________份,自双方签字盖章之日起生效,由协议双方各执_________份,具有同等法律效力。
转让方(盖章):_____________ 受让方(盖章):_____________
法定代表人(签字):_________ 法定代表人(签字):_________
_________年_______月_______日 _________年_______月_______日
签订地点:___________________ 签订地点:___________________
篇10:技术员聘用合同
聘用单位(甲方):__________
受聘人(乙方):__________
为确定双方聘用关系明确双方责任、权利和义务,根据《中华人民共和国劳动合同法》和有关法律、法规,甲乙双方本着自愿平等的原则,经协商一致,特签订本合同。
1.本合同自 ________年 ________月 ________日起至 ________年 ________月 ________日止。
2.甲方聘用乙方在技术员岗位,从事技术工作,担任技术员职务,负责现场施工技术与质量安全管理。
3.乙方遵守国家法律、法规,服从甲方管理。
4.甲方根据需要,可以调整乙方工作,乙方应服从甲方工作调整。
5.如用人单位根据施工情况,需要退场或解聘技术人员,应提前一月书面通知乙方。如乙方中途离职,甲方有权追究乙方相关责任,乙方包赔甲方因自己离职所造成的一切损失。如确有特殊情况必须提前离职,需提前一个月向领导提交书面申请,待批准后方可离职。
6.受聘人员工资待遇工资发放从乙方进场第一天开始算起。工资发放以月为单位,工资为_____元。
7.合同条款双方共同遵守履行,如有未尽事宜双方协商解决。
8.本合同一式两份,甲乙双方各留存一份。
甲方(签字及盖章):__________乙方(签字):__________
篇11:航道通航条件影响评价技术服务合同
项目名称:______________________________________________________________
委 托 方: (公章)
(甲方)
服 务 方: (公章)
(乙方)
中 介 方: (公章)
合同登记机关: (公章)
签订日期: 年 月 日
合 同
有效期限: 年 月 日至 年 月 日
一、服务的内容、方式和要求:
二、委托方应提供的工作条件和协作事项:
三、履行合同的期限、地点和方式:
四、验收标准和方法:
五、报酬及支付方式:
六、违约责任:
七、争议的解决办法:
本合同一式__份。其中委托方__份,服务方__份,中介方__份,鉴证单位__份,公证单位__份,承接方所在地技术市场管理机构2份(其中1份报__技术市场管理办公室)。
篇12:技术转让合同范本[页2]_合同范本
3.2 乙方同意返销甲方生产的合同产品。返销产品的金额为甲方支付乙方全部提成费的____%。返销的产品应达到乙方提供的技术性能标准。每次返销的产品品种、规格、数量、交货期由双方通过友好协商确定。 返销产品价格按3.
1.3条规定的提成基价计算,即目录价格的____%。
第四章 支付和支付条件
4.1 本合同项下的一切费用,甲方和乙方均以美元支付。 甲方支付给乙方的款项应通过____中国银行和____国____银行办理。 如果乙方和甲方偿还金额,则此款项应通过____银行和____中国银行办理。 所有发生在中国的银行费用,由甲方负担。发生在中国以外的银行费用由乙方负担。
4.2 本合同第三章规定的合同费用,甲方按下列办法和时间向乙方支付:
4.2.1 甲方收到下列单据,并审查无误后____天内向乙方支付入门费____美元(大写:____美元)。 (a)由乙方出具的保证函。在乙方不能按照合同规定交付技术资料时,保证偿还金额____美元。 (b)即期汇票正、副本各一份。 (c)应支付金额为入门费总价的形式发票正本一份,副本三份。 (d)____国政府当局出具的许可证影印件一份。若乙方认为不需要出口许可证,则乙方应提出一份有关不需要出口许可证的证明信一份。
4.2.2 甲方收到乙方交付第一阶段产品的下列单据并审查无误后____天内向乙方支付____美元(大写____美元)。 (a)即期汇票正、副本各一份。 (b)商业发票正本一份,副本三份。 (c)空运提单正本一份,副本三份。 (d)乙方出具的第一阶段产品的技术资料、样机、铸件和备件交付完毕的证明信正、副本各一份。
4.2.3 甲方收到乙方交付第二阶段产品的下列单据并审查无误后____天内向乙方支付____美元(大写:____美元)。 (a)即期汇票正、副本各一份。 (b)商业发票正本一份,副本三份。 (c)空运提单正本一份,副本三份。 (d)乙方出具的第二阶段产品的技术资料、样机、附件五规定的____已交付完毕的证明信正副各一份。
4.2.4 合同产品第一批样机验收合格后,甲方收到乙方下列单据并审查无误____天内,向乙方支付____美元(大写:____美元)。 (a)即期汇票正、副本各一份。 (b)商业发票正本一份、副本三份。 (c)双方签署的“合同产品考核验收合格证书”影印本一份。 〔注:如果验收试验延迟并是甲方的责任,将不迟于合同生效后(时间)支付。〕
4.3 本合同第三章规定的提成费,甲方将在抽样产品考核试验出合格后按下述办法和条件向乙方支付:
4.3.1 甲方在每日历年度结束后____天内,向乙方提交一份甲方在上一日历年度的每种型号的产品实际销售量的报告。
4.3.2 乙方每年可派代表到合同工厂的检查和核实甲方合同产品实际销售量的报告,甲方将给予协助。乙方来华费用由乙方负担。如果汇总和/或报告中所列的合同产品数量在检查时发现出入很大,则甲乙双方应讨论此差距并洽商采取正确的措施。
共7页,当前第2页1234567
篇13:技术保密协议书格式
协议人:男,____年____月____日出生汉族,
身份证号码:
协议人:女,____年____月____日出生汉族,
身份证号码:
协议人双方于____年____月____日在____民政局办理结婚登记手续。因双方性格不合无法共同生活,夫妻感情已完全破裂,现双方就自愿离婚一事达成如下协议:
一、双方自愿离婚。
二、子女抚养、抚养费及探望权:
儿子/女儿_____由女方抚养,随同女方生活,抚养费由男方全部负责,男方应于______年___月___日前一次性支付_____元给女方作为女儿的抚养费(/男方每月支付抚养费_元,男方应于每月的1—5日前将女儿的抚养费交到女方手中或指定的--银行帐号:_______________)。
在不影响孩子学习、生活的情况下,男方可探望女方抚养的孩子。(/男方每月可探望女儿一次或带女儿外出游玩,但应提前通知女方,女方应保证男方每月探望的时间不少于一天。)
三、夫妻共同财产的处理:
⑴存款:双方名下现有银行存款共_元,双方各分一半,为_____元。分配方式:各自名下的存款保持不变,但男方/女方应于_____年___月___日前一次性支付_____元给女方/男方。
⑵房屋:夫妻共同所有的位于---的房地产所有权归女方所有,房地产权证的业主姓名变更的手续自离婚后一个月内办理,男方必须协助女方办理变更的一切手续,过户费用由女方负责。女方应于_____年___月___日前一次性补偿房屋差价_____元给男方。
⑶其他财产:婚前双方各自的财产归各自所有,男女双方各自的私人生活用品及首饰归各自所有(附清单)。
四、债务的处理:
双方确认在婚姻关系存续期间没有发生任何共同债务,任何一方如对外负有债务的,由负债方自行承担。(/方于______年___月___日向_____所借债务由_____方自行承担……)
五、一方隐瞒或转移夫妻共同财产的责任:
双方确认夫妻共同财产在上述第三条已作出明确列明。除上述房屋、家具、家电及银行存款外,并无其他财产,任何一方应保证以上所列婚内全部共同财产的真实性。
本协议书财产分割基于上列财产为基础。任何一方不得隐瞒、虚报、转移婚内共同财产或婚前财产。如任何一方有隐瞒、虚报除上述所列财产外的财产,或在签订本协议之前二年内有转移、抽逃财产的,另一方发现后有权取得对方所隐瞒、虚报、转移的财产的全部份额,并追究其隐瞒、虚报、转移财产的法律责任,虚报、转移、隐瞒方无权分割该财产。
六、经济帮助及精神损害赔偿:
因女方生活困难,男方同意一次性支付补偿经济帮助金给女方。鉴于男方要求离婚的原因,男方应一次性补偿女方精神损害费_____元。上述男方应支付的款项,均应于______年___月___日前支付完毕。
七、违约责任的约定:
任何一方不按本协议约定期限履行支付款项义务的,应付违约金_____元给对方(/按支付违约金)。
八、协议生效时间的约定:
本协议一式三份,自婚姻登记机颁发《离婚证》之日起生效,男、女双方各执一份,婚姻登记机关存档一份。
九、如本协议生效后在执行中发生争议的,双方应协商解决,协商不成,任何一方均可向---人民法院起诉。
男方签名:______女方签名:_______
______年___月___日
篇14:技术出口合同范本_合同范本
Contract for Equipment Sales and Technology Licensing
Contract No. ____________________
This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).
Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:
Article 1 Definitions
1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.
1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.
1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.
1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.
1.5 “Destination Airport” refers to _____________Airport.
1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.
1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.
1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.
1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.
1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.
1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.
1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.
1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.
1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.
1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.
1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.
1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.
1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.
1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.
Article 2 Scope of the Contract
2.1 The Seller’s Obligation
2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.
2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.
2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.
2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.
2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.
2.2 The Buyer’s Obligation
2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.
2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.
2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run, Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.
2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.
2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.
2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.
Article 3 Grant of License
3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.
3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.
3.4 Territory
3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.
3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.
Article 4 Price
4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.
4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).
The breakdown price is as follows:
The price for Equipment is __________(say _______________________ only).
Fee for design is __________(say _______________________ only).
Fee for Technical Documentations is __________(say _______________________ only).
License fee is __________________(Say: _________________ only)
4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).
4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.
4.2.3 The above price is fixed and firm.
4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.
4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.
Article 5 Payment
5.1 Down Payment
Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.
5.2 [Option One: Payment by Sight L/C]
The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).
5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) Bill of Lading in one (1) original and ___ ( ) copies;
(b) Commercial Invoice in one (1) original and ___ ( ) copies;
(c) Packing list in one (1) original and ___ ( ) copies;
(d) Certificate of Origin in one (1) original and ___ ( ) copies;
(e) Insurance Policy in one (1) original and ___ ( ) copies;
5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;
(b)One ( 1 ) copy of commercial invoice.
5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;
b) One (1) copy of Commercial Invoice.
5.2 [Option Two: Payment under a L/G]
The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.
5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.
Article 6 Delivery of Equipment and Technical Documentation
6.1 The Delivery of the Equipment
6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.
6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.
Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.
6.1.3 The port of shipment is ____, while the port of destination is ____.
6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.
6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.
6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:
(a) Contract number
(b) Name of the vessel and loading port
(c) Name of the Equipment shipped
(d) Number and date of Bill of Lading
(e) Total volume
(f) Total gross and net weight
(g) Total number of packages/cases
6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:
(a) Bill of Lading
(b) Commercial Invoice
(c) Packing List
(d) Certificate of Origin
(e) Insurance Policy.
6.2 The Late Delivery of the Equipment
6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:
(a) From the first week to the fourth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per
week
(b) From the fifth week to the eighth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per week
(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of
the value of the delayed portion of the Equipment per week
6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.
6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.
6.3 The Delivery of the Technical Documentation
6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.
6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.
6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.
6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.
Article 7 Packing and Marking
7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.
7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:
(a) Destination
(b) Consignee
(c) Contract number
(d) Shipping mark
(e) Gross/net weight (kg)
(f) Case/ bale number
(g) Dimensions: L x W x H (cm)
7.3 Each package shall contain one (1) copy of packing list.
7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.
7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.
(a) Destination
(b) Consignee
(c) Contract number
(d) Gross/net weight (kg)
(e) Item number
(f) Dimensions: L x W x H (cm)
Article 8 Technical Service and Technical Training
8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.
8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.
8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.
8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.
Article 9 Standards and Inspection
9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.
9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.
9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.
The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.
9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.
In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.
9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.
9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.
If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.
Article 10 Design and Design Liaison
10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.
10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.
10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.
Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance
11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.
11.2 Chief Representatives
11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.
11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.
11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.
11.3 Erection and Test Run
11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.
11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.
11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.
11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.
11.4 Commissioning and Performance Test
11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.
If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.
11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.
11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.
11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.
11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.
11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.
11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.
11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.
11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.
The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.
11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.
11.5 Acceptance
11.5.1 Acceptance shall occur in respect of the Equipment when :
(a) Performance Test has been successfully completed as per the Article 11.4.6.; or
(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or
(c) The Seller has paid the liquidated damages as per Article 11.4.9; or
(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or
(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.
11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.
11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.
11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.
11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.
Article 12 Guarantee and Warranty
12.1 The Seller guarantees that:
(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;
(b) The Technical Documentation shall be complete, clear and correct.
12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.
12.3 Defect of the Equipment
12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.
The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.
12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.
12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.
12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.
12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.
12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:
(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or
(b) Alteration, modification or repair without the Seller’s prior written consent; or
(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or
(d) Normal wear and tear.
12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.
12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.
12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.
12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.
12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.
Article 13 Intellectual Property Right
13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.
13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.
13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.
13.4 Registration of the Contract and Maintenance of Patent
13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.
13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.
13.5 Improvement and Grant-back
13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.
13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.
13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.
Article 14 Confidentiality
14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.
14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.
14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.
14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.
14.5 This Article 14 shall survive the expiration or termination of the Contract.
14.6 The confidential obligation shall not apply to the information which:
A. now or hereafter enters the public domain; or
B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or
C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.
Article 15 Taxes and Duties
15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.
15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.
15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.
15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.
Article 16 Force Majeure
16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.
16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.
16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.
Article 17 Applicable Law and Settlement of Disputes
17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.
17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.
17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.
17.4 The arbitral award shall be final and binding upon both parties.
17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.
Article 18 Effectiveness, Term and Termination of the Contract
(a) The Seller and the Buyer sign the Contract;
(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);
(c) The Seller receives the Down Payment;
(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.
18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.
18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.
18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.
(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.
(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.
(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.
18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party
A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
B. fails to perform its confidentiality obligation under the Contract; or
C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.
18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if
A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or
B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or
C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.
18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,
The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.
All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.
All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.
In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.
The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.
E. Termination of the Contract shall not release either party from its confidential obligations under the Contract
Article 19 Miscellaneous
19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).
19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.
19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.
If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract,the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.
19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.
19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.
The Buyer:
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
The Seller :
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.
The Buyer:
The Seller:
By:______________________[Signature]
Name: [printed name]
By:_______________________ [Signature]
Name: [printed name]
Title:
Title:
Appendices
Appendix 1 Specifications and Guarantee Indices (Omitted)
篇15:保密协议书技术人员
甲方:
乙方:
鉴于甲、乙双方业务往来需要,乙方在业务往来过程中有可能接触到甲方的商业秘密,为规范乙方的保密义务,双方同意订立下列条款,以资共同执行。
第一条 商业秘密的定义
本合同项下的商业秘密是指甲方拥有的不为公众所知悉、能为甲方带来经济利益或其它利益的信息,包括但不限于:
1.1、技术秘密:本合同所称的技术秘密包括但不限于专利及非专利的实用新型、外观设计、发明创造、专用技术、工作进度、技术方案、工程设计、电路设计、制造方法、配方、工艺流程、技术指标、计算机软件、数据库、研究开发记录、技术报告、测试报告、检测报告、实验数据、试验结果、图纸、样品、样机、模型、模具、操作手册、技术文档、相关的函电等。
1.2、经营秘密:本合同所称的经营秘密包括但不限于甲方现有及正在开发或构想中的经营政策、客户资源、营销计划、采购资料、定价政策、不公开的财务资料、进货渠道、产销策略、服务网络、招标投标中的标底及标书、其它相关的决议、文件及函电等。
1.3、管理秘密:本合同所称的管理秘密包括但不限于甲方现有及正在制定或构想中的人事信息、法律事务信息、组织结构信息、内部规章制度、业务规程等信息、文件和资料等。
第二条 保密信息不包括以下信息
2.1、在接受保密信息之时,乙方已经通过其它来源获悉的、无保密限制信息;2.2、在乙方没有违背本合同的情况下,已经成为公众普遍可以获得的信息;
2.3、甲方已经公开披露的信息;
2.4、应司法机关或政府机构的有效命令而披露的信息,但仅限于该命令所限制的范围和目的;
2.5、乙方主张特定的信息属于上述信息的,乙方负有举证责任,如果乙方不能证明特定的信息属于上述信息,乙方应按照本合同规定对其负有保密义务。
第三条 保密义务
3.1、乙方自其知悉甲方的商业秘密和其他秘密之日起开始对本合同规定的商业秘密和其他秘密承担保密义务。
3.2、乙方在与甲方合作期间,除了因为合作需要之外,未经甲方书面同意,不得以泄露、告知、发布、转让或者其他任何方式使任何第三方知悉本合同规定的商业秘密和其他秘密,也不得在合作过程中不正当使用或者在合作过程之外使用或许可、帮助他人使用本合同规定的商业秘密和其他秘密。
3.3、乙方仅可为双方合作业务需要,将保密信息披露给其直接或间接参与合作事项的管理人员、职员、顾问和其它雇员(统称“有关人员”),但应保证该类有关人员对保密信息严格保密。
3.4、乙方在与甲方合作期间,发现甲方的商业秘密和其他秘密可能被泄露或已经被泄露时,应及时采取有效措施防止甲方的商业秘密和其他秘密被泄露或被进一步泄露,并及时向甲方报告。
3.5、本协议终止后,乙方应将知悉的甲方一切商业机密予以归还,同时对所有以复制、抄录、描绘、摄制等方法记录的相关数据一并返还。
第四条 违约责任
乙方违反本协议规定时,不管是否给甲方造成损失,乙方应当立即先向甲方支付违约金人民币5万元,同时,甲方有权终止本协议以及解除甲、乙双方间签订的所有合同、协议及其他法律文件;如果乙方的违约行为造成甲方损失的,乙方同时应当承担赔偿责任,乙方应承担的赔偿责任包括但不限于甲方的直接及间接损失,甲方因调查乙方的违约行为、采取补救措施而支出的合理费用,甲方向乙方及有关单位追索赔偿而发生的仲裁费、诉讼费、律师费、交通费等费用。违约金、赔偿金甲有权直接从应支付给乙方的账款中扣除。
第五条 争议解决
若因本协议产生争议,甲、乙双方应通过友好协商方式解决。如果双方通过协商不能解决争议,甲、乙双方同意交由甲方所在地法院管辖。
第六条 其它
6.1、本协议生效后,除双方协商一致或法律法规及本协议另有规定外,任何一方不得单方面中止、终止或解除本合同。
6.2、本协议一式两份,甲、乙双方各执一份,具有同等法律效力。
6.3、本协议自甲、乙双方签署后生效,效力及于本协议终止后5年内。
甲 方:
代 表 人:
住 址:
乙 方:
代 表 人:
住 址:
签署日期: 年 月 日
篇16:技术合同:技术培训合同_合同范本
委托方:_________
法定代表人或负责人:_________
服务方:_________
法定代表人或负责人:_________
根据《中华人民共和国合同法》的有关规定,经双方当事人协商一致,签订本合同。
第一条 项目名称
_________。
第二条 培训的内容和要求
_________。
第三条 培训计划、进度、期限
_________。
第四条 培训地点和方式
_________。
第五条 服务方(教师)的资历和水平
_________。
第六条 学员的人数和质量
_________。
第七条 教员、学员的食宿、交通、医疗费用的支付和安排
_________。
第八条 报酬及其支付方式
_________。
第九条 委托方的违约责任
1.委托方未按合同提供培训条件,影响合同履行的,约定的报酬仍应如数支付;
2.擅自将服务方要求保密的技术资料引用、发表和提供给第三方,应支付数额为_________的违约金;
第十条 服务方的违约责任:
1.服务方未按合同制订培训计划,影响培训工作质量的,应当减收_________%的报酬;
2.服务方提供的师资不符合合同要求,服务方有义务予以重新配备;未按合同规定完成培训工作的,应免收报酬。
第十一条 保密条款
当事人双方应对下列技术资料承担保密义务:
_________。
第十二条 技术成果归属
在履行合同过程中,服务方利用委托方提供的技术资料和工作条件所完成的新的技术成果,属于服务方;委托方利用服务方的工作成果所完成的新技术成果,属于委托方。对新的技术成果享有就该技术成果取得的精神权利(如获得奖金、奖章、荣誉证书的权利)、经济权利(如专利权、非专利技术的转让权,使用权等)和其它利益。
第十三条 本合同争议的解决办法
_________。
本合同自双方当事人签字、盖章后生效。
委托方(盖章):_________ 服务方(盖章):_________
负责人(或授权代表)(签字):_________负责人(或授权代表)(签字):_________
开户银行:_________ 开户银行:_________
帐号:_________ 帐号:_________
担保人(名称)(盖章):_________ 担保人(名称)(盖章):_________
_________年____月____日 _________年____月____日
签订地点:_________ 签订地点:_________
歇后语竞猜:二三四五六七八九 —— 〖查看答案〗
篇17:聘请技术顾问合同范本_合同范本
聘请合同是指以招聘或聘请在职和非在职劳动者中有特定技术业务专长者为专职或兼职的技术专业人员或管理人员为目的的一种合同。以下是第一范文网小编为大家精心准备的:聘请技术顾问合同范本3篇。欢迎阅读与参考!
聘请技术顾问合同范本一
甲方因业务工作需要,聘请乙方担任经济和法律顾问。经双方协商,特订立本合同。
一、乙方接受甲方聘请,指派_______________担任甲方常年经济和法律顾问。
二、法律顾问的工作方式
经济、法律顾问应每月与甲方联系_____次。甲方遇有急需解决的事宜,可随时与乙方联系。
三、法律顾问的工作范围
1 经济和法律咨询,就甲方决策、经营、管理中的重大事项提供法律意见和建议;
2 应甲方要求草拟、审查、修改法律事务文书;
3. 指导或代理甲方参与经济、贸易、科技等项目考察、论证、商务谈判、签约;
4. 代理甲方参与调解、仲裁和诉讼活动;标的数额3万元以上的,应另订委托合同,乙方按规定收费;
5 帮助甲方健全合同管理制度,提高决策、经营和管理水平,为甲方培养合同和其他法律人才。
四、顾问费
为每年________元
支付方式按照双方当事约定的方式。
五、本合同有效期_________年。自双方签订之日起生效。合同期满,甲方需继续聘请法律顾问,经双方协商同意可续订合同。解除合同,须经双方协商同意。
六、本合同一式_______份,双方各持______份。
甲方(盖章)__________
法定代表人:__________
乙方(盖章)__________
法定代表人:__________
______年______月____日
聘请技术顾问合同范本二
______(以下简称甲方)因工作需要根据《中华人民共和国律师暂行条例》的有关规定,聘请_______(以下简称乙方)的律师为法律顾问,经双方协商订立下列协议,共同遵照履行。
一、乙方委派律师_______担任甲方的法律顾问,为甲方提供法律帮助,依法维护甲方的合法权益。甲方指定_______为法律顾问的联系人。
二、法律顾问工作范围:
1.为甲方解答法律问题,必要时提供法律意见书。
2.协助草拟、修改、审查合同和有关法律事务文书。
3.接受甲方委托,参与经济合同谈判。
4.接受甲方委托,担任代理人,参加诉讼、非诉讼、调解、仲裁活动。
5.应甲方要求,向职工进行法制宣传教育。
6.接受甲方委托、办理其它法律事务。
三、律师的工作时间、地点,根据甲方的提议,随时联系约定。
四、甲方向乙方每月缴纳聘请律师费_______元。律师费用按季缴纳,参加诉讼、非诉讼、调解、仲裁、以及项目谈判,收费按规定另议。
五、律师受甲方委托,外出差旅费由甲方支付。
六、甲方应向律师提供与业务有关的情况、资料和必要的工作条件。
七、本合同自双方签字之日起生效,期限为_______年。
八、本合同一式两份,双方各执一份,具有同等效力。
甲方(公章) 乙方(公章)
甲方代表(签字) 乙方代表(签字)
甲方电话: 乙方电话:
地址: 地址:
签约时间: 年 月 日
签约地
聘请技术顾问合同范本三
聘请单位:____________________(以下简称甲方)
法定代表人:__________________________________
受聘单位:____________________(以下简称乙方)
法定代表人:__________________________________
甲方因业务需要,特聘请乙方担任常年知识产权顾问,现经双方协商一致,达成如下协议:
第1条 乙方指派顾问
乙方接受甲方聘请,指派_________担任甲方的常年知识产权顾问,甲方同意前述指派,并认可乙方可能出现的临时委派其他人配合指派人完成第2条所述工作之情形及/或指派的人因故(如疾病、开庭冲突、出差等原因)不能履行职务时,经甲方同意,可由乙方的其他指定人暂时替代处理较急的事务。但乙方更换指派必须经甲方同意。
第2条 甲方的服务范围
日常法律范围:
2.1 就甲方日常涉及的法律问题口头或书面解答法律咨询、提出法律建议或出具法律意见书;
2.2 审查、修改甲方因商务活动与第三方签署的各类合同、协议书或其他法律文件;提出修改意见及法律建议;
2.3 应甲方要求,对甲方签署的各种法律文书进行见证;
2.4 协助甲方参与较为重大商务活动的谈判、磋商,并提供分析论证;
2.5 受甲方委托,签署、送达或者代为收领法律文件;
2.6 受甲方委托,保管甲方要求乙方妥善保管的法律文件;
2.7 就甲方已经、面临和/或可能发生的纠纷进行法律论证,提出解决方案,出具法律意见书;
2.8 受甲方委托,向侵害、损害甲方合法权益的第三方提出交涉及索赔;
2.9 协助甲方完善内部管理的有关法律事务,提出法律建议;(如企业用工保密制度、知识产权合同管理等)
2.10 甲方在经济活动中发生的各类诉讼、仲裁及/或行政处罚案件,须另行约定;
2.11 甲方在经济活动发生的企业改制、兼并重组、收购、破产、上市、融资、房地产开发、土地转让、投资、设立新公司、合并/分立、参股公司、股权转让、及其它类型的重大项目以及法律顾问工作量一次性达4小时以上的专项法律事务,不在本合同服务范围内,须另行约定;
2.12 乙方的服务范围中,不包括各类合同、协议书、规章制度的撰写、草拟;
2.13 本合同中,乙方的服务范围不包括甲方之控股公司、子公司或其他关联公司;
2.14 本条所列2.10条至2.13条法律事务的具体个案实施,如果委托乙方代理,需另行同乙方办理委托手续(另签委托代理合同),并向乙方经办律师出具授权委托书,同时,
甲方须另行向乙方支付代理费,乙方则在收费给予优惠。
商标服务范围:
2.15 就甲方日常商标方面的问题(国内外)做口头或书面解答,提出法律意见或出具法律意见书;
2.16 审查、修改各项有关商标法律文书(国内外),代理国内外商标的申请、变更、转让、无效等事务;
2.17 就甲方有关商标侵权问题(国内外)包括指控他人侵权或被他人指控侵权、或对市场侵权假冒行为提出进行论证、发表律师意见、提出解决方案;
2.18 就甲方已经、面临或者可能发生的(国内外)商标权纠纷包括申请被驳回、被他人异议、被他人提出撤销注册或对他人提出异议、撤销他人商标注册等法律行为进行法律论证,发表律师意见、提出解决方案;
2.19 就甲方有关商标战略进行整体策划提出律师意见、出具建议函;
2.20 甲方有关商标的创意、(国内外)商标的使用、商标的管理、商标的保护、商标的许可使用、商标的市场运作等提出口头建议或出具法律意见书;
2.21 本条所列2.17至2.20项法律事务的具体个案实施,如果委托乙方代理,需另行同乙方办理委托手续(另签委托代理合同),同时,甲方须另行向乙方支付代理费,乙方则在收费上给予优惠。
专利服务范围
2.22 就企业的专利战略、组织构架、人员安排和工作方式提供咨询意见;
2.23 就合作伙伴的或竞争对手的国内外专利提供咨询、文献监视和检索;
2.24 代理国内外发明、实用新型和外观设计专利的申请,技术领域包括:电子、电工、通讯、计算机技术、机械、医药、农药、兽药、化工、材料、生物和生化以及环境保护等;
2.25 代理复审请求及无效宣告请求;
2.26 关于专利纠纷与侵权的法律服务,包括咨询、市场监视、专利权的海关备案、调查取证、庭外调解、申请行政调处及提起诉讼等;
2.27 出具是否具有专利性和是否侵犯他人的专利权的法律意见书;
2.28 接受委托就专利申请的复审决定和专利的无效宣告决定向法院提起行政诉讼;
2.29 技术转让与专利实施许可的中介谈判、合同起草及摸底调查;
2.30 为企业大型投资、合资、引进技术和设备过程中涉及知识产权的技术改造项目提供法律意见书,等
2.31 关于专利保护的其它事务。
2.32 本条所列2.23至2.31项法律事务的具体个案实施,如果委托乙方代理,需另行办理委托手续(或另签委托代理合同),另行向乙方支付代理费,乙方则在收费上给予优惠。
软件服务范围
2.33 就甲方日常计算机软件登记和著作权登记方面的问题(国内外)做口头或书面解答,提出法律意见或出具法律意见书;
2.34 代理计算机软件登记和著作权登记;
2.35 就甲方有关计算机软件程序和著作权保护、管理规章制度,员工保密制度,品牌战略实施提供专业意见或出具法律意见书;
2.36 就软件开发、检索、转让、授权许可的谈判、合同起草、修改及摸底调查、纠纷调解、侵权取证、行政查处乃至法律诉讼提供解决方案和行动;
2.37 本条所列2.34至2.36项法律事务的具体个案实施,如果委托乙方代理,需另行办理委托手续(或另签委托代理合同),另行向乙方支付代理费,乙方则在收费上给予优惠。
第3条 工作方式
3.1 乙方担任甲方常年知识产权顾问的代理人应按甲、乙双方事前约定的时间、地点进行工作。乙方因故不能工作,应事先通知甲方。甲方随时有事交办,如无特殊情况,指派顾问应及时予以受理。
3.2 乙方应按甲方法定代表人和其指定的联系人的要求提供法律服务。本合同中,甲方指定为顾问的联络人,负责转达甲方的指示和要求,转交文件和资料等。
第4条 知识产权顾问费及办案费用
4.1 双方约定,甲方向乙方支付知识产权顾问费每年_________元整,(大写:_________元整)。支付期限为:甲方于本协议签订之日起七日内付清顾问服务费。支付方式为:现金/支票/本票/汇票/电汇
4.2 指派顾问办理甲方委托事项所发生的下列办案费用,由甲方承担:
a.各种政府、法院、行业官方及法定中介机构所收取的费用;_________市区以外发生的差旅、食宿、车船及一切杂费;
c.办理甲方事务而产生的一切交际费用;
d.调查取证购买样品,录音录(照)像,检索查询,公证及技术鉴定费等。
第5条 甲方的义务
5.1 为使乙方能正确完成甲方委托的事项,甲方应根据乙方的要求如实提供有关的资料、信息,并承担诚信责任;
5.2 按时足额向乙方支付顾问费和乙方实际支出的办案费用;
5.3 为乙方处理甲方委托的事宜提供所需的便利条件;如必要的资料、文件、交通及其它方便;
5.4 体谅乙方的职业操守的约束,不强求乙方出具有违其职业操守的法律文件,甲方应尊重指派代理人依据法律独立、不受干扰地作出专业判断的权利。
第6条 乙方的义务
6.1 乙方应在最有效的时间内,勤勉尽责、保质保量完成甲方委托的事宜,并依据法律做出专业判断,努力维护甲方的合法权益;
6.2 乙方应就甲方为乙方处理甲方委托事宜而向乙方提供的资料、信息承担保密责任,除依据国家法律有权了解该等资讯的其他人员以外(如法官、检查官、警官、税务官员等),未经甲方许可,不得向任何组织和个人泄露;
6.3 乙方不得违背职业纪律,未经甲方同意,不得在与甲方有严重利益的另一方亦从事相同的法律服务。
6.4 指派代理人仅接受甲方的法定代表人或联络人的委托办理甲方法律事务,不得随意接受甲方其他员工的委托或咨询,并提供不利于甲方的法律意见。
第7条 合同的生效及解除
本合同有效期为开放式的,自本合同签字之日起生效。甲、乙双方欲解除本合同,应提前二个月书面通知对方。没有书面通知的,视为同意续签合同,本合同继续生效。
第8条 合同的变更
任何一方要求变更本合同条款,需双方再行协商,签订变更协议,未经书面变更的任何内容,不对甲、乙双方产生法律效力。
第9条 其他
9.1 本合同未尽事宜,双方另行协商解决。双方因履行本合同发生争议,亦应协商解决,协商不能解决时,双方均可向_________仲裁委员会提请仲裁,仲裁适用该会之《仲裁规则》。
9.2 本合同一式二份,双方各执一份。
甲方(盖章):_________ 乙方(盖章):_________
授权人(签字):_______ 授权人(签字):_______
_________年____月____日
_________年____月____日
签订地点:_____________ 签订地点:____________
篇18:项目技术服务合同
委托方(以下称甲方):___________________________
服务方(以下称乙方):___________________________
甲乙双方为携手合作,促进发展,满足利益,明确责任,依据中华人民共和国有关法律之相关规定,本着诚实信用、互惠互利原则,结合双方实际,协商一致,特签订本合同,以求共同恪守:
第一条项目名称
___________________________
第二条服务内容、方式和要求
1、服务内容:___________________________。
乙方协助甲方___________________________安装,开放并培训___________________________。
2、方式:___________________。
提供信息化服务平台,开通指定数量与功能,安装服务商。
第三条报酬及其支付方式
1、本项目报酬(服务费或培训费):___________________________。
合计为:___________________________。
累计费用:___________________________。
服务方完成专业技术工作,解决技术问题需要的经费,由_____________方负担。
2、支付方式为如下
合同生效后____________个工作日_日内向乙方支付报酬总额___________%。
第四条声明及保证
甲方:
1、甲方为一家依法设立并合法存续的企业,有权签署并有能力履行本合同。
2、甲方签署和履行本合同所需的一切手续均已办妥并合法有效。
3、在签署本合同时,任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对甲方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。
4、甲方为签署本合同所需的内部授权程序均已完成,本合同的签署人是甲方的法定代表人或授权代表人。
本合同生效后即对合同双方具有法律约束力。
乙方:
1、乙方为一家依法设立并合法存续的企业,有权签署并有能力履行本合同。
2、乙方签署和履行本合同所需的一切手续均已办妥并合法有效。
3、在签署本合同时,任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对乙方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。
4、乙方为签署本合同所需的内部授权程序均已完成,本合同的签署人是乙方的法定代表人或授权代表人。
本合同生效后即对合同双方具有法律约束力。
第六条甲方的主要义务
1、在合同生效后__日内向乙方提供下列技术资料、数据、材料、样品:________。
2、在接到乙方关于要求改进或更换不符合合同约定的技术资料、数据、材料、样品的通知后_3_天内及时做出答复;
3、按约向乙方支付报酬
开户银行:__________________________
开户帐号:__________________________
4、协助乙方完成下列配合事项:
协助乙方进行推广、培训;承担乙方安装、培训所需差旅费用。
第七条乙方的主要义务
1、在______年____月____日前完成技术服务工作;
2、应对甲方交给的技术资料、样品等妥善保管;在合同履行过程中,如发现继续工作对材料、样品或设备等有损坏危险时,应中止工作,并及时通知委托方;工作完成后应归还上述技术资料、样品,不得擅自存留复制品。
第八条保密条款
双方保证对从另一方取得且无法自公开渠道获得的商业秘密(技术信息、经营信息及其他商业秘密)予以保密。
未经该商业秘密的原提供方同意,一方不得向任何第三方泄露该商业秘密的全部或部分内容。
但法律、法规另有规定或双方另有约定的除外。
保密期限为______年。
一方违反上述保密义务的,应承担相应的违约责任并赔偿由此造成的损失。
第九条技术成果收益归属
在履行本合同中,乙方利用甲方提供的技术资料和工作条件完成的新的技术成果,属于乙方所有。
(注:当事人还可以有其他不同的约定)
第十条甲方的违约责任
1、甲方未按照合同约定提供有关技术资料、数据、样品和工作条件,影响工作质量和进度的,应当如数支付报酬。
逾期二个月不提供约定的物质技术条件,乙方有权解除合同,甲方应当支付数额为报酬总额______%的违约金。
2、甲方迟延支付报酬,应当支付数额为报酬总额_____%的违约金,逾期二个月不支付报酬或者违约金的,应当交还工作成果,补交报酬,支付数额为报酬总额_____%的违约金。
3、甲方迟延接受工作成果的,应支付数额为报酬总额______%的违约金和保管费。
逾期二个月不领取工作成果的,乙方有权变卖、处理工作成果,从获得的收益中扣除报酬、违约金和保管费后,剩余部分返还甲方,所获得的收益不足抵偿报酬、违约金和保管费的,有权请求甲方赔偿损失。
第十一条乙方的违约责任
1、擅自不履行合同,应当免收报酬并支付数额为报酬总额______%的违约金。
2、未按约定的期限完成工作的,应支付数额为报酬总额______%的违约金。
3、未按质按量完成工作的,应当负责返工改进或如数补。
如果给甲方造成损失的,应赔偿损失;
4、在工作时间,发现对方提供的技术资料、数据、样品、材料或工作条件等不符合合同规定,未按约定期限通知委托方,造成技术服务工作停滞、延误或不能履行的,应酌减或免收报酬;
5、在工作期间,发现委托方提供的物品有受损的危险,未按约定期限通知委托方,应对由此造成的损失承担责任。
6、违反合同约定、擅自将有关技术资料、数据、样品或工作成果引用,发表或提供给第三人,应支付数额为报酬总额____%的违约金。
7、对甲方交付的样品,材料及技术资料保管不善,造成灭失、短少、变质、污染或者损坏的,应赔偿损失。
第十二条验收标准和方法
1、验收时间:______年____月____日
2、验收地点:_______________
3、验收标准:本合同约定的各项技术指标;
4、验收方法:由甲方组织有关同行业专业技术人员验收,写出验收报告;
5、验收费用由_甲_方负担。
第十三条保证期为___年。
在保证期内发现服务质量缺陷的,乙方应当负责返工或者采取补救措施。
但因甲方使用、保管不当引起的问题除外。
第十四条不可抗力
本合同所称不可抗力是指不能预见、不能克服、不能避免并对一方当事人造成重大影响的客观事件,包括但不限于自然灾害如洪水、地震、火灾和风暴等以及社会事件如战争、动乱、政府行为等。
如因不可抗力事件的发生导致合同无法履行时,遇不可抗力的一方应立即将事故情况书面告知另一方,并应在___天内,提供事故详情及合同不能履行或者需要延期履行的书面资料,双方认可后协商终止合同或暂时延迟合同的履行。
第十五条通知
1、根据本合同需要发出的全部通知以及双方的文件往来及与本合同有关的通知和要求等,必须用书面形式,可采用__当面送交__传递。
以上方式无法送达的,方可采取公告送达的方式。
2、各方通讯地址如下:_________。
3、一方变更通知或通讯地址,应自变更之日起__日内,以书面形式通知对方;否则,由未通知方承担由此而引起的相应责任。
第十六条争议的处理
本合同在履行过程中发生的争议,由双方当事人协商解决,也可由有关部门调解;协商或调解不成的,按下列第_________种方式解决:
1、提交_________仲裁委员会仲裁;
2、双方协商解决。
第十七条解释
本合同的理解与解释应依据合同目的和文本原义进行,本合同的标题仅是为了阅读方便而设,不应影响本合同的解释。
第十八条合同效力
本合同自双方或双方法定代表人或其授权代表人签字并加盖公章之日起生效。
有效期为____年,自__年___月_____日至__年____月___日。
本合同正本一式___份,双方各执____份,具有同等法律效力;合同副本_____份,送______留存一份。
委托方(盖章):_________ 服务方(盖章):_________
委托方担保人(盖章):_________ 服务方担保人(盖章):_________
_________年____月____日 ________年____月____日
篇19:技术传授合同
甲方:
联系方式:
地址:
乙方:
联系方式:
地址:
甲、乙双方依据中华人民共和国有关法律、法规的规定,遵循平等、自愿、公平和诚实信用的原则,经友好协商,达成如下协议,供双方共同遵守。
第一条?合同目的
甲方将现有的餐饮技术传授给乙方,乙方向甲方支付技术学习费用。
第二条?合作期限
1、本合同自_____年_____月_____日起,至_____年_____月_____日止。
2、物料供应有效期为_____年,自_____年_____月_____日起,至_____年_____月_____日止。
第三条?甲方权利和义务
1、甲方为乙方提_____品及业务培训和辅导。
2、乙方为甲方保守各项商业机密,主要为:
(1)乙方严禁把甲方的商业模式,规章制度及商业流程提供给第三方以及机构;
(2)乙方在现有的知情者范围内,严禁告知第三方或者机构,在其甲方处学习;
(3)乙方严禁把现有的餐饮技术告知或者传授给第三方或者机构。若乙方违反规定,经协商无法达成一致者,甲方不予提供技术支持以及后续配料支持,同时宣布作废。
3、甲方有义务就乙方提出的技术问题,通过电话、邮件等方式进行指导讲解。
4、甲方为乙方提供三年的秘方物料支持,按照实际需要供给,超出部分另做协商。
第四条?乙方权利和义务
1、乙方在甲方学习,期限不超过______天。
2、乙方所展开的商业活动不得用甲方的_____商号,甲方只提供商业学习。涉及到的知识产权问题,产生的费用及官司,乙方自行承担。
3、乙方应按协议要求向甲方支付商业学习款项,不得超过_____天。
4、乙方应对甲方提供的商业学习合作协议、经验方法等信息知识产权的保密,不得将此擅自转让或传授他人。
5、乙方开展的商业活动盈亏自己负责,与甲方无关。
6、乙方对甲方承诺,维护甲方形象,不做有损甲方利益行为;规范经营行为,合理处理各方关系,有问题及时联系甲方解决。
7、乙方对甲方提供的秘方物料的保管、销售、完整性、可销售性等负不可推卸的责任和义务,乙方应对商品做足安全措施和投保,保证食品安全。
第五条?金额及结算方式
1、学习金额为_________元(大写:___________)/期,须一次性付清。
2、甲方为乙方提供的物料以现金结算方式,乙方以现金向甲方购买秘方物料。
第六条?技术支持问题
乙方开展商业活动如需甲方对乙方从业人员进行专业技能等业务培训,甲方人员费用及在乙方期间的差旅,饮食,住宿问题由乙方负责。如需甲方派人到乙方进行较长时间的管理,乙方还须按甲方的工资标准付工资给甲方。
第七条?保密
1、双方保证对从另一方取得且无法自公开渠道获得的商业秘密(技术信息、经营信息及其他商业秘密)予以保密。
2、未经该商业秘密的提供方同意,一方不得向任何第三方泄露该商业秘密的全部或部分内容。但法律、法规另有规定或双方另有约定的除外。
第八条?争议解决
1、凡因本合同引起的争议,甲乙双方均应当首先通过充分协商给予解决。
2、如果甲乙双方对于本合同的争议不能够通过协商解决,均可向_________法院提起诉讼。
第九条?补充
1、本合同未尽事宜,依照有关法律、法规执行,法律、法规未作规定的,甲乙双方可以达成书面补充协议。
2、本合同补充合同均为本合同不可分割的组成部分,与本合同具有同等的法律效力。
第十条?合同效力
1、本合同自双方签字并且学习费用到达甲方指定账户后才生效,学习有效期为_____天。
2、本合同正本一式_____份,双方各执_____份,具有同等法律效力。
甲方(盖章):
签订日期:_____年_____月_____日
签订地点:
乙方(盖章):
签订日期:_____年_____月_____日
签订地点: