0纺织外贸实习心得
光阴飞逝，还有半年就要拜别大学生活了，即将踏入社会。我们知道随着中国在国际贸易中位置的赓续上升，以及在我国加入世界贸易组织和举世化进一步成长的新形势下，对付我们国贸专业的学生们来说，或对付作为未来从事国际贸易方面业务的我们来说，去外贸公司实习对我们来说异常紧张。这次我有了一个很好的机会便是去外贸公司进行实习。
短短的实习期已经停止，静下心往返顾这次实习真是感想感染颇深。我们知道实习是大学教导中一个极为紧张的实践性环节，通过实习，可以使我们在实践中打仗与本专业相关的一些实际工作，培养和熬炼我们综合运用所学的根基理论、基础技能和专业知识，去自力阐发和办理实际问题的才能，把理论和实践结合起来，进步我们的实际着手才能，为未来我们卒业后走上工作岗位打下必然的根基。通过这段光阴的学习，从无知到认知，到深入了解，垂垂地我喜欢上这个专业，让我深刻的体会到学习的历程是最美的，在整个实习历程中，我每天都有许多的新的体会，新的想法。
回首我的实习生活，感触是很深的，劳绩也是丰厚的。这次的实习，主要是与非洲、中东、印度等地方的外国贩子做生意，他们在我公司下订单，我们再把订单下到厂里，从中赚取差额。这次的实习阅历我对外贸这个专业有了加倍理性的认识和更深刻的体会。
通过这次的实习，我由第一天的拘谨，对什么事情都充溢着好奇，转而渐渐适应了这样的生活，服务情按部就班，循序渐进。这次的实习，让我懂得了很多，知道了很多，大学文凭其实只是一块敲门砖。进入工作单位后，人人都是从头开始，凡事都要本身去摸索，没有人会手把手教你。所以，我们有需要培养主动学习才能和立异才能，必须尽力进步自身的综合素质，合适时代的必要。
更多相似范文
篇1：货物进口合同样本[页3]_合同范本
□ cif或cfr
cif and cfr
卖方须按时在装运期限内将货物由装运港装船到目的港。在cfr术语下，卖方应在装船前2天电传/传真/电报买方合同号、品名、发票价值及开船日期，以便买方安排保险。
the sellers shall ship the goods duly within the shipping duration from the port of shipment to the port of destination . under cfr terms , the sellers shall advise the buyers by cable/fax/telex of the contract no. , commodity , invoice value and the date of despatch two days before the shipment for the buyers to arrange insurance in time.
□ ddu
卖方须按时在装运期限内将货物由装运港装运至目的港。
the sellers shall ship the goods duly within the shipping duration from the port of the port of destination .
□
14.装运通知
shipping advice :
一件装载完毕，卖方应在____小时内电传/传真/电报买方合同编号、品名、已发运数量、发票总金额、毛重、船名/车/机号及启程日期等。
the sellers shall immediately upon the completion of the loading of the goods , advise buyers of the contract no., names of commodity , loading quantity , invoice values , gross weight , name of vessel and shipment date by tlx/fax/cable within _____hours .
15.质量保证：
quality guarantee :
货物品质规格必须符合本合同及质量保证书之规定，品质保证期为货到目的港_____个月内，在保证期限内，因制造厂商在设计制造过程中的缺陷造成的货物损害应由卖方负责赔偿。
the sellers shall guarantee that the commodity must be in conformity with the quality and specifications specified in this contract and letter of quality guarantee .the guarantee period shall be months after the arrival of the goods at the port of destination , and during the period the sellers shall be responsible for the damage due to the defects in designing and manufacturing of the manufacturer.
16.商品检验：卖方须在装运前_____日委托 检验机构对合同之货物进行检验并出具检验证书，货到目的港后，由买方委托____检验机构进行复检。
goods inspection : the sellers shall have the goods inspected by inspection authority days before the shipment and issued the inspection certificate . the buyers shall have the goods reinspected by inspection authority after the goods arrival at the destination.
17.索赔
claims:
如经中国_____检验机构复检，发现货物有损坏、残缺或品名、规格、数量及质量与本合同及质量保证书之规定不符，买方可于货到目的港后 天内凭上述检验机构出具的证明书向卖方要求索赔。如上述规定之索赔期与质量保证期不一致，在质量保证期限内买方仍可向卖方就质量保证条款之内容向卖方提出索赔。
the buyers shall lodge claims against the sellers based on the inspection certificate issued by china inspection authority days after the arrival of the goods at the destination , if the goods are found to be damaged , missing or the specifications , quantity, and quality not in conformity with those specified in this contract and letter of quality guarantee . in case the claim period above specified is not in conformity with the quality guarantee period, during the quality guarantee period, the buyers have rights to lodge claims against the sellers concerning the quality guarantee.
共5页，当前第3页12345
篇2：委托寄送进出口许可证协议
合同号码：
签约日期：
买方： 卖方：
本合同由买卖双方缔结，用中、英文字写成，两种文体具有同等效力，按照下述条款，卖方同意售出买方同意购进以下商品：
「章名」 第一部分
1.商品名称及规格
2.生产国别及制造厂商
3.单价(包装费用包括在内)
4.数量
5.总值
6.包装(适合海洋运输)
7.保险(除非另有协议，保险均由买方负责)
8.装船时间
9.装运口岸
10.目的口岸
11.装运唛头，卖方负责在每件货物上用牢固的不褪色的颜料明显地刷印或标明下述唛头，以及目的口岸、件号、毛重和净重、尺码和其它买方要求的标记。如系危险及/或有毒货物，卖方负责保证在每件货物上明显地标明货物的性质说明及习惯上被接受的标记。
12.付款条件：买方于货物装船时间前一个月通过______银行开出以卖方为抬头的不可撤销信用证，卖方在货物装船启运后凭本合同交货条款第18条A款所列单据在开证银行议付贷款。上述信用证有效期将在装船后15天截止。
13.其它条件：除非经买方同意和接受，本合同其它一切有关事项均按第二部分交货条款之规定办理，该交货条款为本合同不可分的部分，本合同如有任何附加条款将自动地优先执行附加条款，如附加条款与本合同条款有抵触，则以附加条款为准。
第二部分
14.FOB/FAS条件
14.1.本合同项下货物的装运舱位由买方或买方的运输代理人___________租订。
14.2.在FOB条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期装上买方所指定的船只。 14.3.在FAS条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期交到买方所指定船只的吊杆下。
14.4.货物装运日前10-15天，买方应以电报或电传通知卖方合同号、船只预计到港日期、装运数量及船运代理人的名称。以便卖方经与该船运代理人联系及安排货物的装运。卖方应将联系结果通过电报或电传及时报告买方。如买方因故需要变更船只或者船只比预先通知卖方的日期提前或推迟到达装运港口，买方或其船运代理人应及时通知卖方。卖方亦应与买方的运输代理或买方保持密切联系。 14.5.如买方所订船只到达装运港后，卖方不能在买方所通知的装船时间内将货物装上船只或将货物交到吊杆之下，卖方应负担买方的一切费用和损失，如空舱费、滞期费及由此而引起的及/或遭受的买方的一切损失。
14.6.如船只撤换或延期或退关等而未及时通知卖方停止交货，在装港发生的栈租及保险费损失的计算，应以代理通知之装船日期(如货物晚于代理通知之装船日期抵达装港，应以货物抵港日期)为准，在港口免费堆存期满后第十六天起由买方负担，人力不可抗拒的情况除外。上述费用均凭原始单据经买方核实后支付。但卖方仍应在装载货船到达装港后立即将货物装船，交负担费用及风险。
15.C&F条件
15.1.卖方在本合同第8条规定的时间之内应将货物装上由装运港到中国口岸的直达船。未经买方事先许可，不得转船。货物不得由悬挂中国港口当局所不能接受的国家旗帜的船装载。
15.2.卖方所租船只应适航和适货。卖方租船时应慎重和认真地选择承运人及船只。买方不接受非保赔协会成员的船只。
15.3.卖方所租载货船只应在正常合理时间内驶达目的港。不得无故绕行或迟延。
15.4.卖方所租载货船只船龄不得超过 年。对超过 年船龄的船只其超船龄额外保险费应由卖方负担。买方不接受船龄超过二十年的船只。
15.5.一次装运数量超过一千吨的货载或其它少于一千吨但买方指明的货载，卖方应在装船日前至少10天用电传或电报通知买方合同号、商品名称、数量、船名、船龄、船籍、船只主要规范、预计装货日、预计到达目的港时间、船公司名称、电传和电报挂号。
15.6.一次装运一千吨以上货载或其它少于一千吨但买方指明的货载，其船长应在该船抵达目的港前7天和24小时分别用电传或电报通知买方预计抵港时间、合同号、商品名称及数量。
15.7.如果货物由班轮装运，载货船只必须是______船级社最高船级或船级协会条款规定的相同级别的船级，船只状况应保持至提单有效期终了时止，以装船日为准船龄不得超过 年。超过 年船龄的船只，卖方应负担超船龄外保险费。买方绝不接受超过 年船龄的船只。
15.8.对于散件货，如果卖方未经买方事前同意而装入集装箱，卖方应负责向买方支付赔偿金，由双方在适当时间商定具体金额。
15.9.卖方应和载运货物的船只保持密切联系，并以最快的手段通知买方船只在途中发生的一切事故，如因卖方未及时通知买方而造成买方的一切损失卖方应负责赔偿。
16.CIF条件 在CIF条件下，除本合同第15条C&F条件适用之外卖方负责货物的保险，但不允许有免赔率。
17.装船通知 货物装船完毕后48小时内，卖方应即以电报或电传通知买方合同号、商品名称、所装重量(毛/净)或数量、发票价值、船名、装运口岸、开船日期及预计到达目的港时间。如因卖方未及时用电报或电传给买方以上述装船通知而使买方不能及时保险，卖方负责赔偿买方由此而引起的一切损害及/或损失。
18.装船单据
18.A.卖方凭下列单据向付款银行议付货款：
18.A.1.填写通知目的口岸的__________运输公司的空白抬头、空白背书的全套已装运洋轮的清洁提单(如系C&F/CIF条款则注明“运费已付”，如系FOB/FAS条款则注明“运费待收”)。
18.A.2.由信用证受益人签名出具的发票5份，注明合同号、信用证号、商品名称、详细规格及装船唛头标记。 1
8.A.3.两份由信用证受益人出具的装箱单及/或重量单，注明每件货物的毛重和净重及/或尺码。
18.A.4.由制造商及/或装运口岸的合格、独立的公证行签发的品质检验证书及数量或重量证书各两份，必须注明货物的全部规格与信用证规定相符。
18.A.5.本交货条件第17条规定的装船通知电报或电传副本一份。
18.A.6.证明上述单据的副本已按合同要求寄出的书信一封。
18.A.7.运货船只的国籍已经买主批准的书信一封。
18.A.8.如系卖方保险需提供投保不少于发票价值110%的一切险和战争险的保险单。
18.B.不接受影印、自动或电脑处理、或复印的任何正本单据，除非这些单据印有清晰的“正本”字样，并经发证单位授权的领导人手签证明。
18.C.联运提单、迟期提单、简式提单不能接受。
18.D.受益人指定的第三者为装船者不能接受，除非该第三者提单由装船者背书转受益人，再由受赠人背书后方可接受。
18.E.信用证开立日期之前出具的单据不能接受。
18.F.对于C&F/CIF货载，不接受租船提单，除非受益人提供租船合同、船长或大副收据、装船命令、货物配载图及或买方在信用证内所要求提供的其它单据副本各一份。
18.G.卖方须将提单、发票及装箱单各两份副本随船带交目的口岸的买方收货代理人_______________。
18.H.载运货船启碇后，卖方须立即航空邮寄全套单据副本一份给买方，三份给目的口岸的对外贸易运输公司分公司。
18.I.卖方应负责赔偿买方因卖方失寄或迟寄上述单据而使买方遭受的一切损失。
18.J.中华人民共和国境外的银行费用由卖方负担。
19.合同所订货物如用空运，则本合同有关海运的一切条款均按空运条款执行。
20.危险品说明书 凡属危险品及/或有毒，卖方必须提供其危险或有毒性能、运输、仓储和装卸注意事项以及防治、急救、消防方法的说明书，卖方应将此项说明书各三份随同其他装船单据航空邮寄给买方及目的口岸的____________________运输公司。
21.检验和索赔 货物在目的口岸卸毕60天内(如果用集装箱装运则在开箱后60天)经中国进出口商品检验局复验，如发现品质、数量或重量以及其它任何方面与本合同规定不符，除属于保险公司或船行负责者外，买方有权凭上述检验局出具的检验证书向卖方提出退货或索赔。因退货或索赔引起的一切费用包括检验费、利息及损失均由卖方负担。在此情况下，凡货物适于抽样及寄送时如卖方要求，买方可将样品寄交卖方。
篇3：出口代理合同_合同范本
出口代理合同
甲方(出口货物供货人)：_________
乙方(出口代理人)：_________
甲乙双方经友好协商，就乙方代理甲方出口货物一事，达成以下条款：
第一条 代理协议的订立：
(一)乙方代理甲方出口的货物的状况：
1.品名：_________
2.数量：_________
3.质量：_________
4.规格：_________
5.包装：_________
6.成交条件：以经乙方确认的、甲方在_________网上交易平台上与外商成交的条件为准。
(二)代理协议的形式：协议的订立及修改均需以书面形式(含传真)，否则不发生效力。
(三)甲方义务：
1.如实提供与订立协议有关的主要事实和情况;
2.对本协议以及乙方根据本协议与国外买方签订的外销合同的条款进行充分的了解，对各方的权利义务，各方免除或者限制各自责任的条款有充分的注意。
(四)乙方义务：
1.如实提供与订立协议有关的主要事实和情况;
2.采取合理的方式提请甲方注意免除或限制其责任的条款，并按甲方的要求，对该条款予以说明。
第二条 双方责任：
(一)甲方的义务：
1.对外销合同承担的义务：
(1)接受乙方现采用的商品外销标准正本合同的固定条款。承认乙方代表甲方承担这些合同条款对“卖方”权利和义务的规定。
(2)收到乙方交来的外销合同副本后，立即进行核对。如发现与其原要求有不符点，在收到合同后3个工作日内以传真或电报通知乙方。否则，视为甲方已接受该外销合同，承担该外销合同的权利和义务。
2.出口货物：
(1)甲方提供的货物应符合本协议规定的数量、质量、和规格，并须按照协议规定的方式进行包装。
(2)提供货物的品质证明文件。
(3)在_________年_________月_________日前将协议约定的全部货物运到_________。
3.费用：
(1)承担乙方因代理出口产生的运输费、商检费、港口运杂费、仓储费、报关费、保险费及银行手续费等有关费用。
(2)根据实际出口货物的数量计算总货款，并根据此总货款向乙方支付_________%的代理费。 相关的合同样本
·房地产代理合同 ·委托购房合同 ·财务代理委托合同
·人事代理协议书 ·委托协议书 ·货物运输代理合同
(3)上述的费用及代理费需在代理协议签订后_________日内交付。
(二)乙方义务：
1.对外成交后，及时将外销合同副本送交甲方。
2.办理出口所需的商检、报关、对外运输、并对外议付。
3.根据外销合同收到外商的付款后，在七个工作日内按照付款当日银行公布的外汇买入价，将外汇折算成人民币支付给甲方。
第三条 违约责任：
(一)甲方
推荐阅读：合同 代理 协议
必须严格执行本协议：若由于甲方原因未能在港口当局规定期限内办理报关、纳税、商检、发运等有关手续，由此引起的一切后果由甲方自行负责。因甲方违约给乙方造成损失的，需向乙方给付总货款_________%的违约金。若违约金不足补偿乙方的损失，甲方还需向乙方补足不足部分的损失。
(二)乙方必须严格执行本协议：因外商原因导致外销合同延迟履行、不完全履行或不能履行时，使乙方不能履行本代理协议的，乙方不承担责任。但在甲方书面提出要求并提供费用及协助下，乙方有义务向外商交涉索赔。
共2页，当前第1页12
篇4：外贸企业跟单员实习报告_实习报告_网
外贸企业跟单员实习报告
在xx公司做实习的跟单员已两个星期有余，对于xx公司的毛巾出口业务也有了些基本的了解。实习期间的工作也使自己有不少的体会，从中也懂得了许多知识，现略作陈述。
一、对于工作流程的认识
纺织是一家以出口毛巾为主要业务的有限责任公司，其毛巾出口多达20个国家和地区，以日本和印度为主要出口国。销售经理接单分配给跟单员任务后，跟单员要及时的跟进，同生产车间沟通，安排机台的生产。样品生产出来之后，负责样品检测。由于生产一直在进行，所以有问题应及时的同生产主任沟通，保证生产出符合客户要求的产品。跟单员的另一项主要工作就是与外协加工厂的沟通，负责订购包装毛巾所需要的各种辅料，如纸箱、包装袋、卡头纸、腰封、不干胶等等。要求在生产车间将印染合格的毛巾运往整理车间之前将这些辅料送到仓库，以备及时的包装。确认产品的包装后，分配给整理车间包装职工任务，保证毛巾的按时装柜。
作为实习生，我的主要任务是认识各种产品，了解其所需要的各种辅料。从整理车间开始工作，学习产品的规格，包装方式以及所需要的各种辅料和相关外加工厂的基本情况。目前我已认识了车间的各种产品，对于生产车间和整理车间的基本运作也有所了解。
二、实习体会
其次是工作无处不是沟通。跟单员的主要工作其实一句话可以概括：保证按时交货！这就需要跟单员不断的与产品流经的各个部门相沟通。从线纱到毛巾，从辅料到包装，跟单员需要接触多个部门，并需要亲自到车间考察了解产品的生产进度，及时的跟进产品。这就需要具备灵活的沟通能力。作为尚在整理车间的实习生，当前的工作对象还仅限于车间主任，车间包装职工及我的两位上司。对待上司要恭敬服从，对待车间主任要认真严肃，对待包装职工要勤快可亲。我不确定这样的准则是否可以让我的工作变得更加的轻松流畅，这需要时间的检验。当然没有什么是绝对的真理，一切准则都随着时间环境的变化而改变，我会争取不断的进步。我已认识到沟通能力对于工作的重要性，希望自己可以在这方面一直提高吧！
三、工作建议
实习两个多星期，或者说在整理车间的两个多星期，我最大的感受就是Xx公司的企业凝聚力与Xx公司规模的不相匹配，即职工对于Xx公司的归属感还不足。没有归属感就不会有企业文化的认同，没有企业文化的认同就会导致企业结构的松散。对于车间的职工来说，她们只是Xx公司的匆匆过客，可以随便的离开而没有留恋。我目前接触的仍只是整理车间的包装职工，尽管她们算不上严格意义上的技术工种，但我认为她们也是一部分，她们也为发展贡献自己的青春。但她们自己并不认为自己是在为Xx公司工作，而是单纯的想着多挣钱。她们经常会抱怨功过时间过长，抱怨没有假期，抱怨没有任何的福利。坚持在工作是因为这比较自由，离开没有什么约束，她们也从不为发展着想。也许对于来说，她们走了再找人就行了，反正工作简单。但是她们离开后会去做什么呢？肯定是选择其他的毛巾公司，投奔竞争对手。资源永远都是有限的，人力资源也是如此。Xx公司还需在企业文化建设上另辟蹊径。
《外贸企业跟单员实习报告》到此结束，由于文笔欠缺，如有错误还请张经理见谅；若有做的不对或不好的地方也请张经理指正，不胜感激！
篇5：2024年外贸业务员年底总结_业务员工作总结_网
我们依依惜别了任务繁重、硕果累累的xx年，满怀热情的迎来了光明灿烂、充满希望的xx年。在这年终之际，现对来公司九个月的时间里所作的工作汇报如下：
一.完成了100p圆筒、100p彩虹、60p共91个集装箱的出口到美国，14个托盘的100p彩虹出口到日本，10个托盘的60p和100彩虹到中国台湾，及2400套圆筒和600套60p(replacement)到美国。
主要负责：
1.签订合同后，催客户开信用证，并与收到后审核，有问题并通知及时修改
2.按制定的出货计划及相关要求与货贷联系租船订舱
3.与客户确认相关得出货资料后，整理单据，办理木托熏蒸。并准备熏蒸证书
4.协调好生产部门，按客户不同的包装要求，安排拖车发货
5.核算出相关的出口数据，制作单据，委托办理出口报关
6.根据信用证要求，制作并准备相应的出口单据，去银行办理交单议付，有时办押汇
7.登记相关的出口资料，并按客户要求，每周提供装箱图片、箱封号、船名航次等资料
8.将资料整理归档，并随时与银行核对每笔货款得到帐情况。并将每月的出口资料提供给财务
此项工作繁琐且重复率高(自七月份起，几乎每周重复一次)，占去了近80%的精力。期间因工作时间短，经验不足，也犯过不少错误：
1.拖车订晚了，害同事及工人加班装集装箱
2.与车间及其他部门配合、协调不够好。打件时缠绕膜的包装方式出现错误，检查工作没做好
3.车间加班不及时，常被叔叔点名
通过这段时间的努力，使我个人的耐心、细心程度及对工作的合理安排得到了锻炼，学会了在繁忙之中找条理，危难之中找希望。
二.与客户进行日常的邮件联系。
主要负责与韩国best selection 公司联系关于此出口美国货物的细节内容，一般通过邮件来回确认。包括三种货物的包装、结算、出货期、产品质量、木托干湿度、法兰克福展位、新样品及相关产品的变动等等内容，其中大部分是协助王总来完成。
期间曾因业务经验少有过失误：在事情紧急、误解了韩国意思的情况下，与美国客户直接联系。结果给客户造成误解，给王总带来麻烦。
通过这项工作，使我原本欠缺的英语写作及口语得到了很大的提高，并学到了好多与客户交流的技巧及业务上的知识。但离一个成功国际贸易业务员的标准还差得很远，在今后工作中，定会多多注意，加以改善。
三.新产品的开发，为客户备样。
将王总与客户的谈判结果(有时旁听并记录)及产品要求、变化等内容传达给采购及生产部门，并负责监督并随时向领导汇报工作进度。按双方协商及客户要求，准备样品并负责发到美国或韩国。按不同要求，为客户提供图片、报价等，通过邮件反复确认。协助销售为b.s. 整理库存样品并报价；给b.s.准备从日本带回的新样品; 给 morris 准备美国展会样品并报价等。
通过对此业务的接触，使我对公司的产品有了更好地了解，但距离还差得很远。这对于业务员来讲是一大缺陷，希望公司以后有时间能定期为新员工组织学习和培训，以便于工作起来更顺手。
四.与韩国han kook sharp订遥控铅芯;催goodfela 生产并尽快发货;订emicro的细太空，并与收到货后，对于出现的质量问题进行邮件联系。由于出口美国货物的任务加重，后来都转给小毕负责。
五.处理日常工作，服从公司领导安排。
联系法兰克福展位的装修及邀请函的办理；为领导办理迁证准备资料;与车队、熏蒸、货贷、报关行、快递等搞好关系并与之定期结算费用;服从领导日常安排的各项工作;协助行政部制定部门职责;联系复印机维修，电脑维护等等日常工作。
总体说来，对于领导交给的各项任务都已比较顺利、较好的完成了。
展望邻近的xx年，我会更加努力、认真负责的去对待每一个业务，也力争赢的机会去寻求更多的客户，争取更多的订单，完善进出口部门的工作。相信自己会完成新的任务，能迎接新的挑战。
篇6：外贸业务员实习报告_实习报告_网
外贸业务员实习报告范文
业务员实习报告怎么写？下面，我们以外贸业务员实习报告为例，教大家如何写实习报告，并希望大家能从这份实习报告中找到实习报告撰写技巧。
毕业以后，在不知经历了多少次面试之后，终于有让有了工作的机会， 带着兴奋和激动，我开始了我的实习工作。以下是我的实习报告总结，敬请各位提出宝贵意见。
时间流逝，我的实习将要结束，最先，我抱着学习和锻炼的精神来到这里，实习充实了我的学习生活，我学到了许多书本上无法体验的知识。通过实习，我感触颇多，得到许多新的认识，对许多问题多了深一层次的思考。经过两个多月的实习，使我对工作，生活都有了一个全新的体验。以后就是社会上的一份子了，责任也将越来越重。我是在一家外贸公司实习，我在公司主要工作是熟悉外贸流程以及做业务，对一些新客户的发展和老客户的维护。首先我介绍一下我在公司所要做的事情：
1. 客户询盘：一般在客户下订单之前，都会有相关的order inquiry给我们业务部，做一些细节上的了解。
2. 报价：我们业务部及时回复客人查询，确定货物品名，型号，生产厂家，数量，交货期，付款方式，包装规格及柜型等，并做好performa invoice 给客户做正式报价。
3. 得到订单：经过洽谈，收到客户正式的订单purchase order。
4. 下生产订单：得到客人的订单确认后，把订单转做成内部订单给采购部让她给工厂下订单，安排工作计划。
5. 业务审批：业务部收到订单后，首先做出业务审核表。按出口合同审核表的项目如实填写，尽可能将各种预计费用都列明。合同审批需附上客人订单传真件，与工厂的收购合同。审核表要由业务员签名，部门经理审批，再交管理部人员审核后才能执行。如金额较大的，或有预付款和佣金等条款的，要经公司总经理审批才行。合同审批之后，制成销售订单，交给部门进程员跟进。
6. 下达生产通知：业务部在确定交货期后，满足下列情况可下达生产通知，通知工厂按时生产： 如果是t/t付款的客户，要确认定金已经到账。 如果是西联付款的客户，要先确定付款是否已经到达本地的西联。
7. 验货 ： 在工厂把货物生产好，并发货到公司之后， 要对所定货物进行查验，是否能用，质量是否过关，这些是必须要进行验证的，是基本原则，因为要想稳定客户资源，这一部分就一定要做好的。
8. 制备基本文件。工厂提供的装箱资料，制作出口合同，出口商业发票，装箱单等文件。
9. 发货：通知货代来公司收货。并且把所以必备的单据叫给货代。
10. 确认收货：在发货后要通知客户已发货，并且一个星期左右要询问客户是否收到货物。
选择进入公司自然少不了要办公，办公相对来说是比较程序化和正式化的。首先，要遵守的就是时间，准时上下班，对于在大学比较自由的我们来说要锻炼“坐”功。我们每天都是坐在电脑前面，一坐就是好几个小时。其次，要适应办公的氛围，基本上办公的时候还是很严肃的，在紧张的工作重要懂得调节。第三，就涉及到现代办公工具的使用，复印，打印，传真没有想象的容易。对于我们外贸业务员还要能够通过电话和邮件中跟外国客户沟通好。熟悉 sales confirmation，commercial invoice 等各种单据是基本的。通过对商务文件的翻译发现也没有想象的难，只要将中文意思能够用简单的文字表达清楚就行。
信念，坚持到底是获得成功的最主要条件。
篇7：义乌外贸公司实习报告_实习报告_网
一段时间后，我熟练了很多。英文信自是不在话下，繁琐的货柜结帐单也不会每份都要老板亲自对帐，以色列客户的散货拼柜也不会再让我头痛欲裂，每天听的阿拉伯语也不会再一句不懂。像小草一样，顶着再大再重的石头也要向上生长。我相信自己的能力，并为自己的进步感到骄傲。
工作，其实并没有太大难度。只要会一定英语，肯专研，就人人都可以胜任。问题是，在浙江义乌的人才市场上，本科、英语六级、计算机二级，老实地说，我算是百里挑一了。虽然在上海遍地都是，极不值钱。所以我选择了暂时离开。在这里，我是经理助理，有相当不错的环境。仅有的两台电脑，一台在我桌上，工资两千虽不算高，却已高于其他员工。
上班时间早8：00——晚6：30，有工作就要加班，无加班费，无休息日。对此我只有接受，在这里，老板的话就是制度，不得不服从。面试时她和蔼地对我说：你是新人，周末就多多学习。后来我才恍然大悟，什么学习，根本就是要你天天上班!本以为离家仅两小时车程，可以常回家看看，现在不免感到有些失落。但公司可以打电话，只要老板不在，所以释然多了。在三个月的时间里，我学会了不少阿语。刚开始是一窍不通，还被老板责备了一次：你怎么连个阿语都不会!我冤不知往哪儿审，不过这一句话，大大促进了我学习阿语的步伐。两个月后她无意中听到了我和老外的对话，用惊讶的口气第二次评价了我的阿语：你现在阿语这么好啦?!我说：舒克兰(阿语：谢谢)同事集体晕倒。
从这里我知道学语言最重要的是环境，而不是语法词汇之类。语言是用来交流的，而最快的途径是开口说!我真切地体会到了这点。对于工作，我发觉我能做的已经做过了，老板不会再让我做其他走出办公室的事情。重要客户，她一概叫一个亲信的翻译或她妹妹带。她妹妹的英语，在想说但说不完整的阶段，所以她向老板申请带上我，我刚和老外聊两句天气，老板就发话：你不要多说，我妹妹说不来的地方你教她一下就可以了。我说哦。一路跟着拎包。以后她妹妹再叫我去，我便说事情太多。
办公室里面，生意自然是老板亲自谈，还要关门关窗。外人根本没窥探的机会。我侥幸谈过一次，那晚老板赶不回来，但厂家和老外都在了。我便做翻译，将老外的要求说与厂家，将厂家的价格报与老外。谈并不是很难，货量大，价钱自然一低再低。老外还要印花体字，我当即设计，打印给厂家带回去做样品。双方都十分满意。我感到了一种前所未有的成就感，因为如果换成老板，她根本不会设计字体。潘多拉的盒子打开，原来不过如此。
什么人有什么样的能力，取决于其在什么职位。出自我的一位好朋友。我终于明白并相信了这句话。随着时间的推移，所有的光环渐渐散去，事物都还原了本来的面目。老板的脾气越来越暴躁，对待员工一概用咆哮的态度。我是比较幸运的，和她对话时不用捂着耳朵。三个月将近，我觉得我的价值应该有所提升了，便决定向老板要求加薪。我采取了极其巧妙的方法：和一个大客户搞好关系(老板对他言听计从)，请他和老板说。那老外还真讲信用，果然向老板说了我一堆好话，老板心花怒放，为有如此好又如此便宜的员工。对我说：你现在进步很大嘛，老外都夸你好呢!
共3页，当前第1页123
篇8：纺织外贸实习心得
实习是从与外国公司建立贸易关系开始的，然后就是根据自己的业务(进口或是出口)与客户进行询盘、发盘、还盘、接受，再就是订立合同，合同订好后，就是单据、发货、审单等，经过多个步骤一项业务才能有完成。在各个步骤中，都不能有任何的错误和偏差，否则，会给自己公司带来很大的损失。在建交时，一定要诚心诚意，让对方相信我方是他的合作伙伴，在询盘、发盘、还盘、接受等各项业务时，一定要认真核算成本、利润、利润率，以保证我方的利益，在制造各种单据、审核单据时一定要做到与合同以及信用证相符，以免到时候出现银行拒付货款的事情。在每一个步骤进行时，当出现差错时，一定要及时改正且与对方取得联系，与对方商议，取得一致协商同意，这样才能保证交易的公平与顺利进行。
我在实习过程中，在计算成本核算时，由于对方要订购的商品种类有四种且每一种商品都得报两个价，每一种商品都要自己去查询相关的资料，比如商品的质量、包装、体积、购货成本、汇率、增值税率、各种商品所适用的货物等级、海洋运价、海关税则等)由于平时对这些东西不够熟练且不太在意，我花去了太多的时间在这个上面，且在计算时，经常出错，这说明自己的业务水平还很差，需要不断地加强;在制单的时候，也是这样，需要填写的东西没填，不需要填的却填了，结果是，一张好好地单据被我弄得乱七八糟;在审单的时候，是我最困难的时候，因为是对对方的相关单据审核，我只是注意一些货物方面的东西，比如订货的数量、包装等，却没有注意审核一些看起来很正常实际上却有着很大隐患的东西，像公司的名称、地址、付款条件等，这些也是非常重要的，一旦出错，会对公司产生很大的影响;当一切敲定时，我却忘了善后工作，对方银行开来了拒付通知，我一时手足无措，心想前面的工作都做得很顺利，为什么银行还是拒付款呢，然后我仔细看了拒付的理由，心里才有了底，跟对方通过信函联系，双方取得了一致意见，最后总算是一笔交易成功了。在最后，我还写了一封感谢对方的合作且希望下次再继续合作的善后信。
篇9：进口货物贸易合同
甲方：
乙方：
甲乙双方本着互惠互利的原则，经友好协商，依据中华人民共和国民法典的相关规定达成如下协议：
一、甲方责任：
1.甲方负责及时向乙方提供进口货物报关、报验及提货所需的全套资料，以便乙方办理货物通关手续;
2.甲方负责提前通知乙方货物的流向、数量;
3.甲方负责及时支付乙方的代理包干费及实报实销的费用;
4.如甲方需要乙方代办国内铁路或水路运输，需传真确认到货地点、收货人、件数等;
5.甲方及时审核乙方开立的费用发票，在无误的情况下及时向乙方支付。
二、乙方责任：
1.乙方接受甲方的委托，作为甲方的港口货运代理人，代甲方办理报关、报检和接卸仓储工作;
2.乙方接到甲方的有关单据并根据甲方提供的船名从速办理报关、报检及发运、仓储工作，如因乙方的懈怠影响货物通关、装运等工作，乙方承担相应的压箱费、堆存费、滞港费等相关费用;
3.在货物接卸期间，对第三方原因产生的溢短残损乙方应及时以书面形式通知甲方并协助甲方办理有关索赔事宜;
4.乙方负责在海关结关后十五个工作日内将海关核退的进口付汇报关单及关税、增值税税单正本邮寄给甲方，若有延误，造成的损失由乙方承担。
三、费用标准
1.40英尺标准集装箱
1)如应甲方要求，乙方只负责接货到港区提货为止，乙方负责掏箱、装车。甲方支付乙方一次性包干费：1100元/40尺。
2)甲方指定仓库交货：
港口至天津地区：包干费元/40尺。港口至塘沽地区：包干费元/40尺。以上费用不包括关税，增值税，商检费。费用实报实销。
2.散货
港区提货：
1)舱底交货：一次性包干费元/吨+舱底交货费。
2)船边交货：一次性包干费元/吨。运至甲方指定仓库运费：
1)港口至天津地区：元/吨。
2)港口至塘沽地区：元/吨。铁路运费、铁路装车费根据乙方提供的铁路货运单据实报实销。以上费用不包括关税，增值税，商检费。
3.仓储费用:每天元/空干吨，入库费元/空干吨，出库费元/空干吨，由提货方承担。出库时乙方凭甲方出库单并向甲方电话确认后方可放货。乙方负责妥善保管入库货物，严格做到按集装箱号存放，并做好防火、防盗、防雨，严禁不盖篷布存放。仓储费用每月结算一次，乙方将费用明细表及发票邮寄于甲方，甲方接到发票审核无误后将款项及时支付给乙方。
四、其它条款
1.乙方提供费用发生的票据抬头均按“纸业有限责任公司”开立，如有特殊要求的，甲方以书面形式传真乙方为准。
2.本协议一式两份，甲乙双方各执一份，双方签字盖章后生效。未经更改的传真件同具法律效力。
3.本协议未尽事宜及违约责任按《中华人民共和国民法典》有关规定执行。
甲方：_________乙方：_________
法定代表人：_________法定代表人：_________
_________年____月____日_________年____月____日
篇10：委托处理债务纠纷委托书
杭州市________________人民法院：_________________
委托人：_________________,性别,民族：_________________,身份证号码：_________________工作单位：_________________,住址：_________________。
委托人：_________________,性别,民族：_________________,身份证号码：_________________工作单位：_________________,住址：_________________。
受委托人：_________________,职务：_________________,工作单位：_________________,电话：_________________,邮政编码：_________________。
受委托人：_________________,职务：_________________,工作单位：_________________电话：_________________。
现委托上列受托人在我与纠纷一案中,作为我方参加诉讼的委托代理人。委托权限为：____________项。
1.代为代为一审诉讼、代为调解。
2.特别授权(包括代为承认、放弃或变更诉讼请求;进行和解,上诉、转委托、代为签收法律文书)。
3.代为提出申请执行、签收执行法律文书。
委托人：_________________
_____年_____月_____日
篇11：空运出口运输协议_合同范本
空运出口运输协议
空运出口运输协议
甲方：_________________
地址：_________________
电话：_________________
乙方：_________________
地址：_________________
电话：_________________
经过平等、友好协商，甲、乙双方就空运货物出口运输事宜，于_________年_________月_________日签订如下协议：
一、委托事项
甲方接受乙方委托，承接乙方委托的空运出口运输业务。乙方指定甲方作为其代理人，代为安排提货、办理出口报关和出口商品检验检疫等事务。
二、乙方应在每票货物出运之前五个工作日以书面形式（包括信函、传真、电报、电传）向甲方提交《出口运输委托书》（简称委托书或托单）。
委托书应包括但不限于以下内容：
1.托运人（shipper）名称、姓名、地址、联系方式；
2.收货人（consignee）名称、姓名、地址、联系方式；
3.通知方名称、姓名、地址、联系方式；
4.航班号、日期、始发港、目的港；
5.货物品名、件数、重量、体积、声明价值；
6.运费及其它费用的标准和支付方式；
7.托运人的签名、盖章、日期。
乙方提交的委托书没有签名盖章或乏上述部分或全部内容的，乙方应按照甲方要求进行补正，否则甲方有权拒绝接受委托。
三、乙方委托甲方代为办理货物出口报关和出口商品检验检疫等事务的，应及时向甲方提供办理上述事务所需的文件和单证。乙方应对其提供的文件和单证的真实性、合法性和完整性负责。
四、乙方在向甲方发出委托后要求撤销或变更委托事项、委托内容的，应采用书面形式并得到甲方的认可，乙方应补偿甲方由此付出的额外费用。
五、接收货物
如果甲方在收货时发现乙方的货物表面状况（包括外包装）不良，甲方有权拒绝接收货物。如果乙方不能在甲方要求的时间内对货物及其包装进行改良，甲方有权停止为乙方出运货物。由于甲方原因未能在乙方指定时间内将货物按排出港，乙方有权向甲方提出损失索赔。
六、对货物的要求
乙方不应在其托运的货物中夹带 禁止运输、限制运输物品和危险物品。有关对禁止运输、限制运输物品和危险物品的规定以国际公约、相关国家法律法规规章、行业协会等的明文规定为准。如乙方谎报货物品名，夹带上述物品，乙方应对由此而造成的甲方的全部损失承担赔偿责任。
七、乙方应向甲方支付与货物运输有关的所有运杂费用。乙方应在货物起飞后30天内将相应款项支付给甲方。
八、本协议有关的任何事务，适用中华人民共和国法律、法规及相关国际公约的规定。
九、协议的修改和补充
对本协议的修改和补充应采用书面形式，并得到双方的书面确认。修改和补充从双方书面确认之日起生效。
十、本协议自双方盖章之日起生效。本协议的有效期至_________年_________月_________日止。
十一、本协议以传真形式签订确认，同具法律效力。
十二、签约地：_________________________。
甲方（盖章）：_________
代表（签字）：_________
_________年____月____日
乙方（盖章）：_________
代表（签字）：_________
_________年____月____日
空运出口运输协议
空运出口运输协议
篇12：技术出口合同范本_合同范本
Contract for Equipment Sales and Technology Licensing
Contract No. ____________________
This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).
Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:
Article 1 Definitions
1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.
1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.
1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.
1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.
1.5 “Destination Airport” refers to _____________Airport.
1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.
1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.
1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.
1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.
1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.
1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.
1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.
1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.
1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.
1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.
1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.
1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.
1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.
1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.
Article 2 Scope of the Contract
2.1 The Seller’s Obligation
2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.
2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.
2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.
2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.
2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.
2.2 The Buyer’s Obligation
2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.
2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.
2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.
2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.
2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.
2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.
Article 3 Grant of License
3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.
3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.
3.4 Territory
3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.
3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.
Article 4 Price
4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.
4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).
The breakdown price is as follows:
The price for Equipment is __________(say _______________________ only).
Fee for design is __________(say _______________________ only).
Fee for Technical Documentations is __________(say _______________________ only).
License fee is __________________(Say: _________________ only)
4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).
4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.
4.2.3 The above price is fixed and firm.
4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.
4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.
Article 5 Payment
5.1 Down Payment
Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.
5.2 [Option One: Payment by Sight L/C]
The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).
5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) Bill of Lading in one (1) original and ___ ( ) copies;
(b) Commercial Invoice in one (1) original and ___ ( ) copies;
(c) Packing list in one (1) original and ___ ( ) copies;
(d) Certificate of Origin in one (1) original and ___ ( ) copies;
(e) Insurance Policy in one (1) original and ___ ( ) copies;
5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;
(b)One ( 1 ) copy of commercial invoice.
5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;
b) One (1) copy of Commercial Invoice.
5.2 [Option Two: Payment under a L/G]
The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.
5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.
Article 6 Delivery of Equipment and Technical Documentation
6.1 The Delivery of the Equipment
6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.
6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.
Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.
6.1.3 The port of shipment is ____, while the port of destination is ____.
6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.
6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.
6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:
(a) Contract number
(b) Name of the vessel and loading port
(c) Name of the Equipment shipped
(d) Number and date of Bill of Lading
(e) Total volume
(f) Total gross and net weight
(g) Total number of packages/cases
6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:
(a) Bill of Lading
(b) Commercial Invoice
(c) Packing List
(d) Certificate of Origin
(e) Insurance Policy.
6.2 The Late Delivery of the Equipment
6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:
(a) From the first week to the fourth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per
week
(b) From the fifth week to the eighth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per week
(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of
the value of the delayed portion of the Equipment per week
6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.
6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.
6.3 The Delivery of the Technical Documentation
6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.
6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.
6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.
6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.
Article 7 Packing and Marking
7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.
7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:
(a) Destination
(b) Consignee
(c) Contract number
(d) Shipping mark
(e) Gross/net weight (kg)
(f) Case/ bale number
(g) Dimensions: L x W x H (cm)
7.3 Each package shall contain one (1) copy of packing list.
7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.
7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.
(a) Destination
(b) Consignee
(c) Contract number
(d) Gross/net weight (kg)
(e) Item number
(f) Dimensions: L x W x H (cm)
Article 8 Technical Service and Technical Training
8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.
8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.
8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.
8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.
Article 9 Standards and Inspection
9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.
9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.
9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.
The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.
9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.
In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.
9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.
9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.
If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.
Article 10 Design and Design Liaison
10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.
10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.
10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.
Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance
11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.
11.2 Chief Representatives
11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.
11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.
11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.
11.3 Erection and Test Run
11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.
11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.
11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.
11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.
11.4 Commissioning and Performance Test
11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.
If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.
11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.
11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.
11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.
11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.
11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.
11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.
11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.
11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.
The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.
11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.
11.5 Acceptance
11.5.1 Acceptance shall occur in respect of the Equipment when :
(a) Performance Test has been successfully completed as per the Article 11.4.6.; or
(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or
(c) The Seller has paid the liquidated damages as per Article 11.4.9; or
(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or
(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.
11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.
11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.
11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.
11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.
Article 12 Guarantee and Warranty
12.1 The Seller guarantees that:
(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;
(b) The Technical Documentation shall be complete, clear and correct.
12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.
12.3 Defect of the Equipment
12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.
The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.
12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.
12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.
12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.
12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.
12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:
(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or
(b) Alteration, modification or repair without the Seller’s prior written consent; or
(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or
(d) Normal wear and tear.
12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.
12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.
12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.
12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.
12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.
Article 13 Intellectual Property Right
13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.
13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.
13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.
13.4 Registration of the Contract and Maintenance of Patent
13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.
13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.
13.5 Improvement and Grant-back
13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.
13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.
13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.
Article 14 Confidentiality
14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.
14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.
14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.
14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.
14.5 This Article 14 shall survive the expiration or termination of the Contract.
14.6 The confidential obligation shall not apply to the information which:
A. now or hereafter enters the public domain; or
B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or
C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.
Article 15 Taxes and Duties
15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.
15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.
15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.
15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.
Article 16 Force Majeure
16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.
16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.
16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.
Article 17 Applicable Law and Settlement of Disputes
17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.
17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.
17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.
17.4 The arbitral award shall be final and binding upon both parties.
17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.
Article 18 Effectiveness, Term and Termination of the Contract
(a) The Seller and the Buyer sign the Contract;
(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);
(c) The Seller receives the Down Payment;
(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.
18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.
18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.
18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.
(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.
(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.
(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.
18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party
A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
B. fails to perform its confidentiality obligation under the Contract; or
C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.
18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if
A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or
B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or
C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.
18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,
The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.
All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.
All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.
In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.
The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.
E. Termination of the Contract shall not release either party from its confidential obligations under the Contract
Article 19 Miscellaneous
19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).
19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.
19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.
If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.
19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.
19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.
The Buyer:
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
The Seller :
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.
The Buyer:
The Seller:
By:______________________[Signature]
Name: [printed name]
By:_______________________ [Signature]
Name: [printed name]
Title:
Title:
Appendices
Appendix 1 Specifications and Guarantee Indices (Omitted)
篇13：外贸业务员个人实习总结
工作进行的还是比较顺利的，只需要简单的作一些相关的操作即可，当然也有些客户需要更详细的信息，于是我需要对全局都做一番描述，力图让对方更深的了解我们的产品，最重要的是让他们觉得我们的产品是非常出色的。虽然自认为口才并不好，但我能够把事情描述的比较清晰，如此也令客户满意。而每次让客户满意的挂电话的时候，自己心里都会觉得很踏实，虽然已经讲的口干舌燥了，但一想，也许我刚才一番话就搞定了一笔生意，即使再辛苦也是值得的。也可以了解目前市场的行情与竞争者公司。
篇14：电子产品代理进口合同
甲方：_______________________
乙方：_______________________
甲、乙双方本着平等互利、共同发展的原则，经友好协商，就乙方作为甲方语音网关系列产品的代理销售事宜，达成以下协议。
双方均确认已阅读过该协议，并理解和同意其中的条款和条件;该协议的签订，将取代双方口头和书面对乙方代理销售语音网关产品进行的所有交流。
一、协议有效期间、履行地点及代理准入区域
1.本协议自双方签署后正式生效，有效期间自_______年______月______日至_______年______月______日。
2.甲、乙任一方如无意续约，于某到期_________日前，以书面方式通知另一方。
3.甲、乙双方如无终止协议表示，则本协议自动续约一年。
4.指定代理准入区域：______________________________.
二、代理销售的原则
1.乙方必须是独立的法人实体或销售实体。
2.乙方注册经营范围项目中，必须包含与代理销售产品相关之项目。
3.甲方向乙方提供各系列产品和通讯落地平台服务，如有新产品本合同仍然有效。
三、双方的权利和义务
1.对乙方的经营有咨询、调查权。
2.甲方应保证其产品的合格及市场的可销售性：即产品合格的质量标准。
3.乙方在行业选型、大客户攻关时，甲方给予技术和规划方案的支持。
4.甲方向乙方提供的售后服务保证：免费保修期为一年;一年后的修理需客户(或乙方)支付运费及更换零件费;一年内需送甲方维修的，甲方提供替代设备，甲方对此造成的损失免责。
5.甲方根据乙方的需要，向乙方提供技术支持，包括免费代培技术，技术咨询，语音网关系列产品资料、销售方案以及大客户攻关等支持，大客户攻关支持乙方负责费用。
6.甲方有义务为乙方的终端用户提供话费清单(在乙方有要求时)。提供话费清单的方式有：网页查询;电子文档邮件发送。
四、本协议的终止
1.按照双方要求终止协议。
2.任一方如违反本协议条款，或严重违背商业道德和法律，或严重损害对方的利益时，受损方有权单方终止本协议，并要求对方赔偿经济损失。
本合同一式2份，甲乙双方各执1份，具同等法律效力。
如有未尽事宜，经双方协商以书面补充合同附上，同具有法律效力。
甲方(盖章)：________
乙方(盖章)：________
负责人(签字)：______
负责人(签字)：______
地址：________________
地址：________________
联系人：_____________
联系人：______________
电话：________________
电话：________________
________年____月____日
________年____月____日
篇15：外贸业务员辞职报告范文
尊敬的领导：
您好!
从20xx年x月第一次面试到如今，转眼我在xx公司工作生活了快1年，当我拿到手上沉甸甸的1年期合同，心情很复杂。选择不再续签是我鼓起了很大的勇气和决心的。
时间，真是过得很快。看看公司墙上一幅幅生动的照片，看看自己相机里记录的一幕幕公司活动，我是多么拼命地融入这个团体。从办公室到单证到财务部，每天楼上下的忙碌，擦肩而过的同事，我叫的出他们每一个的名字，那么真实而亲切，我用最大的努力做好自己的工作和协助他人工作。记得每个加班的晚上，和同事一起等待客人的回复，希望可以争取订单;记得我绞尽脑汁想的搞笑节目在拓展训练晚会上让大家眼泪都笑了出来;记得我熬夜写年终晚会的台词，周末和大家一起排练，是勤劳和汗水换来的肯定;记得我激情万丈的喊着“海企长城，众志成城”直到嗓子无法出声;记得跪在地上一张张贴着我们的各种照片，制作我们每期的板报;记得林伟贤老师讲座上我急中生智现场想的一个问题，竟得到了如此多的赞赏也许我不是最好的员工，但是，我真的一直在努力。
我是一个坚持的人。从我踏进学校的大门我就告诉自己将来要成为一名好的外贸业务员，从进公司的第一天起我就想成为独当一面的业务员，我觉得其他任何的活动、光环、荣誉都比不过做好业务来的更有成就感。可是非常遗憾的是，1年来尽管我尽了最大的努力，却没有为部门业绩的提升带来多大的帮助。外贸今年整体走下坡路和国家政策的调整确实让我担心自己的未来，甚至质疑过曾经的选择，我想找到适合自己的平台和今后前进的方向是我目前最重要的事情。
感谢您愿意挽留我，如果您这样想的话。我会把您的挽留当作对我最大的鼓励，坚定的走下去;我感谢您依旧认为我是可以培养的人，感谢您看见并认同我在公司每一天，每一次活动所作的努力。
我想在我年轻，精神充沛，依旧充满激情和干劲的时候去主动选择新生活。前方的路其实我不太清楚，但是对于我自己，我充满信心。
此致
敬礼!
辞职人：
20xx年xx月xx日
篇16：2024开题报告流程_开题报告_网
2017开题报告流程
一、课题开题的意义
1、古语说得好“凡事预则立，不预则废”。课题开题是课题实质性研究工作的开始，课题的开题关系到研究的方向和进程，也关系到课题研究的质量。
2、有利于课题相关专家聚在一起，对课题进行重新审视。
3、有利于实验教师汲取多方面意见，完善课题研究工作和研究计划。
二、课题开题的流程
1、撰写并提交课题开题报告
课题负责人在举行课题开题之前，应将相关资料、文献进行整理，按照开题报告的格式撰写好开题报告初稿，并交由导师审阅。随后，由导师出面邀请课题研究方向相关的专家，定好开题报告的时间、地点。
2、邀请相关专家参加开题论证会
开题报告由学校课题组组织，参加者有相关学科的专家至少3人(其中本学科专家不少于一半参加。开题报告主要是拟开展的工作和研究计划提出意见和建议完善方案、修改补充方案。会议按一定的流程进行。首先由主持人介绍开题报告的主要内容、重点烛介绍研究目标、研究内容、方法、实施步骤，以及对报告中难以表述的问题进行补充性说明，随后，有关专家向主持人提出质疑，负责任的专家可以会“毫不留情”地提出许多挑剔的批评意见，这些意见可以避免课题研究在初始阶段就走弯路，但是主持人并非被动的“听令者”，而是主动的参与者，除了听取专家的意见外，也可将自己的不同观点表达出来，与专家一起研讨。
3、根据专家意见修改并完善开题报告
开题报告会后，主持人汇总多方面的意见和上级课题组负责人进行研讨，并根据负责人和专家的意见及自己对问题的认识，再次修改开题报告 ，开题报告一旦形成，原则上不再擅自修改研究计划(如改变研究内容或缩小研究范围等)。如确有特殊原因，需要对研究计划进行变动，主持人应向上级课题组提出申请，待批准后再执行。
篇17：外贸年度工作总结
时光荏苒，转眼一年的时间飞逝过去了。20x年意味着x的第一个十年的结束，明年即将是x第二个十年的开始，在这辞旧迎新的日子里，回首这一年工作的历程不禁感慨十分。
在这一年里虽然没有取得惊人的成绩，但是其中的曲折和坎坷我是深有体会的。对有一定销售经验的人来说，销售确实不难，但对于一个销售经验不是很丰富，刚从事销售这一行业不到两年的人来说是有一定挑战性的，到现在为止，我不再说自己是一个销售新人，因为我进军到销售这一行业也快一年半的时间，说长不长说短不短，大约540天的时间每天都是在围绕销售这一个中心而展开的。20x年这一年又快过去了，虽然没有取得斐然的成绩，但是我觉得已经做得对得起自己，每天我没有在虚度光阴无所事事，而是在想方设法怎样做好方案和报价迎来客户，一个业务员要得到公司的肯定那只有销售业绩，这是铁打的事实。为了明年能取得优异的成果，一定再接再厉，做的努力去挑战极限，争取明年做到超过预定销售额。
在今年一月份的时候还只刚刚利用阿里巴巴网络销售平台，一个一个上传产品写英文产品描述，由于去年那半年的时间没有实质性的单在跟对产品了解得非常浅显，所以在产品描述阶段利用了比较长的时间，开始没人教尽管不是太难但实际操作起来还是遇到了不少麻烦，全靠自己慢慢摸索出来，怎样把产品描述写好关键词设好。在上季度询盘是非常少的而且收到的询盘也没有多少含金量，即使利用大部分时间比较细致地去回复询盘，结果发现有潜在客户回复得也很少，而且回复得不太详细，实则从那些回复可以看出他们是没有意愿想买。可能只是为了积累一些报价，或用于与其他供应商的报价做比较，这一季度的报价基本都是无用功。在第二季度的时候可能产品比较完善，描述也算比较到位了，慢慢地一些含金量高一点的询盘就来了，在那众多的询盘中你无法得知哪些是有效得询盘，只有每个询盘都认真去对待从而引导潜在客户，他们才会一步一步对你的回复和话题感兴趣，而后会利用他们宝贵的时间在忙碌中开始一天一天回复你的问题。
实际上，只要大部分询盘是含金量较高的就一定会迎来客户来国看厂，这样拿到单的机会就较高。同时，还有一种情况就是客人需要的设备较多金额大，他们于是来国参观几家厂，而我们要在其中脱颖而出让他们选择我们生产的设备，这个有很多因素影响买卖的成功，价格因素，沟通因素，公司其他一些因素。所以成功与否，看实力。没拿到那个单也不要垂头丧气，拿到了也不要沾沾自喜。机会还很多，不过每次都要好好把握。
第三季度基本都是在跟单学做单据，其实这些表面上不难，但是都是些细致活，只要一个地方错了可以让客户清不了关。就拿单单要相符单证要一致来说，公司抬头一定要用对，不要装箱单和商业发票还有原产地证用的不是一个公司的，那么就会出问题了，这只是其中的一例。
第四季度，在11月上旬所幸接到了一个单，本来是打算做完今年辞职了，明年做到四月份的样子如果做不到单就辞职。
因为我知道跟到一个单的最短的时间大概就是3个月的样子。重新给自己制定一个销售计划，其中最不可缺少的就是毅力和勤奋，还有一个坚定的信念。我总是暗示自己单肯定是会有的，只是时间的问题。虽然付出并不一定就有很大的回报，但是有所付出就一定会有得，天上不会自动掉馅饼，只有自己努力去争取才有机会获得成功，成功总是垂青于有准备的头脑，所以作为一个销售员要时刻准备着如何去应对未知。
这一年即将过去，在这一年里失望过也庆幸过，庆幸地是在没有其他做外贸的同事的带领下也可以完成一个小单。做了一个一个小单之后信心便有了，这是庆幸之处。其中不足之处还是对于技术上的一些问题无法给客户解答清楚，因为那些是要弄懂原理才弄得清的，比如说那些管路的原理，水从哪里流进后经过哪些管流出，哪些管又是回收浓水的，打开哪些开关又是洗膜的，打开哪些是冲洗预处理罐子的，哪个阀门又是什么功能的等等，等客户问到这些无法告知的时候便意识到实际上只弄清楚基本的流程是远远不够的。到目前为止还没有售出过一条生产线的机器，那里面的细节涉及技术上的问题应该，所以说无论从事哪个行业，学是无止境的。从这些，我看到了自己的不足，以后如果想小有成就必须在这方面精益求精。
总结到这里我基本上没有什么心得和自我审视的地方了，只是还有下一年的目标，想着朝那个目标迈进，能售出一条纯净水生产线的设备一直是我追求的目标，希望明年第一季度可以实现。
另外，在这里还有对公司的一些制度稍为不满，我希望公司可以按照我的建议做到，如下，第一，我觉得公司不能每月扣我们提成加底薪的15%，5%还是我们可以接受的，还有每一年扣除的部分应该在年末清算给我们。第二，退税部分在退税下来了就要发给我们。第三，在价格表的基础上售卖出产品。
篇18：进口合同[页2]_合同范本
进口合同（一）
14.单证
卖方应向议付银行提交下列单证：
（a）标明通知收货人/受货代理人的全套清洁的、已装船的、空白抬头、空白背书并注明运费已付/到付的海运提单。
（b）商业发票________份；
（c）在cif条件下的保险单/保险凭证________份；
（d）品质证明书；
（e）装箱单/重量单/数量一式________份；
（f）原产地证明书；
（g）发货通知书。
15.装运条件
15.1 在cif和cfr条件下，卖方应在装运前十天以电报或传真将船名、国籍和船龄通知买方。经买方确认后卖方才可装运，买方应在接到通知后五个工作日内予以确认，否则即视为已被确认。
15.2 在fob条件下，由买方负责按照合同规定的交货日期洽定舱位。卖方应在合同规定的装船期前________日将合同号、货物名称、数量、金额、箱数、总重量、总体积及货物在装运港备妥待运的日期以电传/传真通知买方。买方应在装船期前十日通知卖方船运船只或者到达日期，以便卖方安排装运。如果有必要改变装运船只或者其到达日期，买方或其运输代理应及时通知卖方。如果船只不能在买方通知的船期后________日内到达装运港，买方应承担从第________日起发生的货物仓储保管费用。
如果买方船只按时到达装运港，而卖方不能按规定的时间备妥货物以待装船，则由此而产生的空舱费及滞期费应由卖方负担。
15.3 在fob、cfr和cif条件下，卖方在货物装船完毕后应立即以电传/传真向买方及买方指定的代理人发出装船通知。装船通知应包括合同号、货物名称、数量、净重、毛重、包装尺码、发票金额、提单号码、启航期和预计到达的目的港的日期。如货物系危险品或易燃品，也应注明危规号。
15.4 在运载船只启航之后________个工作日内，卖方应将本合同第14条中列举的单证的副本（各一份）航空邮寄给买方。
15.5 可以/不得转船。
15.6 可以/不得分运。
15.7 卖方有权在________％数量内溢装或短装。
16.检验和索赔条款
16.1 在货物运抵最终目的地的港后，买方有权向货物检验机构申请对货物进行检验。检验机构为中华人民共和国________进出口商品检验局。
16.2 买方在货物到达最终目的地目的港卸货完毕之日起90日内，如发现货物之质量、规格、数量、重量、包装、安全或卫生条件与合同规定的不符，应在上述期限内向卖方发出索赔通知，并凭借上款规定的检验机构所发具的检验证书向卖方索赔。除由保险公司或航运公司应承担的责任外，卖方须就该索赔要求进行赔偿。
16.3 卖方应在收到于上述期限内由检验机构出具的检验证书以及索赔要求之后15日内回复买方。
16.4 买方有权就第16条和第17条所述货物缺陷所造成的损失向卖方要求索赔。
17.品质保证
卖方保证其所提供的全部货物均符合本合同的规定，并且是全新和未使用过的。货物的质量保证期为自货物到达目的地之日目的港卸货完毕之日起12个月。在质量保证期内，凡因设计、制造工艺和所有材料而产生的缺陷，卖方应自负费用进行修理或更换货物或部件。
18.不可抗力
任何一方对由于下列原因而导致不能或暂时不能履行全部或部分合同义务的，不负责任：水灾、火灾、地震、干旱、战争或其他任何在签约时卖方不能预料、无法控制且不能避免和克服的事件。但受不可抗力影响的一方，应尽快地将所发生的事件通知对方，并应在事件发生后15天内将有关机构出具的不可抗力事件的证明寄交对方。如果不可抗力事件之影响超过120天，双方应协商合同继续履行或终止履行的事宜。
共3页，当前第2页123
篇19：2024外贸业务员实习报告范文500字_实习报告_网
在紧张的学习和积极的实践中不知不觉我加入科华公司天津办已经有一个多月的时间了，回顾这初入公司一个月的工作历程，我能深深感到公司的蓬勃发展和科华员工的拼搏精神。下面是我这一个月来的工作总结，敬请各位领导提出宝贵意见。
我走出大学校园已经快四年了，几年的行政工作使我培养了基本的工作能力和素养。销售工作富有挑战性，我一直希望自己能够得到一些提高后从行政转做业务。年初刚好看到科华公司招聘，科华公司是一家上市公司，专业致力于从事ups的研发、生产和销售已经有22年的时间，并且在全国各地直接派驻近50多个服务网点，能够做到厂家级销售，器件级维修，无论从产品质量、价格、服务各个方面都有很强的市场竞争能力，连续多年销售额排名国内品牌第一，是国内ups行业的领军企业。了解到这些以后，我觉得科华公司是做一名销售新人的很好的学习和发展的平台，能够应聘成功，成为公司销售队伍中的一员，我感到机会非常难得。
刚刚进入公司，我对ups方面的知识不是很了解，对于新环境、新事物比较陌生。在天津办事处领导和同事的帮助和耐心培养下，我很快对相关的产品知识和天津市场情况有了一定的了解，作为天津办事处的一员，我深深感到自己身肩重任。作为企业的门面，企业的窗口，自己的一言一行也同时代表了一个企业的形象。所以更要提高自身的素质，高标准的要求自己。在高素质的基础上更要加强自己的专业知识和专业技能。此外，还要广泛了解整个ups天津市场的动态，走在市场的前沿。经过一个月的学习和磨练，我能感觉到自己的成长，但距离一名合格的销售人员还有很大差距，我将在以后的日子里更加努力，快速成长。
领导安排我负责天津公共事业市场，天津作为直辖市在学校、医院、政府部门等单位，ups的使用应该比较广泛。尤其天津市目前正处于加大城市建设力度阶段，学校、医院等方面也有很多新建项目，为ups开辟了新的市场，我们天津办事处经过多年的打拼，已经使我们的产品得到了市场的认可，也积累了很多类似经销商这样的合作伙伴，这些都是对于我作为一个新人初入市场的有利条件。
利用这些宝贵的资源，我经过一段时间的专业知识的学习后，积极走入市场，接触客户。但因为是刚刚起步，我还是遇到了非常多的困难。首先，公司虽然有以上非常多的有利条件，但是目前市场上我们的竞争对手还是很多，而且类似于山特、艾默生、apc等进口品牌，进驻中国市场较早，相对于我们的产品有更加广泛的知名度和客户群体，让这些客户了解并认可我们的产品并不是一件容易的事情;其次，我作为一个新人，ups的专业知识和销售技巧方面知识还是非常欠缺，目前市场调研阶段，经常出现找不对人，不是能从每个客户那里了解到有用信息，这方面是我近期急需解决的问题，在有过合作的客户方面，如何与客户交朋友，如果将客户关系作深作牢固方面，我有的时候不知所措;第三，是自己的心理素质的培养，因为前期开发新客户，尤其是在找不对人的情况下，有时连介绍产品的机会都没有，虽然是很正常的情况，但还是会造成很大的心理压力。
总之，经过了一个月的销售生活，在天津办从领导到同事耐心无私的帮助下，我学到了很多知识，也取得了一点收获，但是困难还是很多。主观上，我非常珍惜能够到这样优秀的公司任职的机会，我会努力让自己成为一名合格的销售人员;客观上，还是需要公司、领导及同事们在各个方面的继续帮助和教导，使自己尽快成长，为公司做出应有贡献。
篇20：怎么写外贸业务员辞职报告书
Dear leader:
hello!
Since the beginning of the year, I have been working in the company for two years and have been helped by all the colleagues of the company.
In the past two years, I be very happy to work in the company, to feel the atmosphere of the company is like a big family, everybody get along harmonious harmony, * * has learned how to get along with your colleagues in the company, how to set up with the customer relationship etc. * * * *. And in the company of the past two years, the use of giving * * * * company learning time, learning the * * new things to enrich himself, and increase the * * * * knowledge and practical experience of their own. I sincerely thank the company for more than two years of care.
After * * in the second half of the time, the company gave a very good opportunity, let oneself learn to do market * * operation, etc. * * but his lack of market experience, he has no good do a good job in the new market development for the company, your body feeling guilty the cultivation of the two years of the company.
Personally, I feel my performance in the past a period of time cant make themselves feel satisfied, feel some live up to take care of these two years, the company also felt in the past two years had done some contribution to the company, also feel oneself ability was still far short of, in the companys various aspects demand on their lack of ability. After careful consideration, oneself and the company consider, oneself present to the company to resign, hope the company gives approval.
Signature: * * * *
* * * * day * * * *
中文：
从20xx年初至今，进入公司工作两年的时间里，得到了公司各位同事的多方帮助，我非常感谢公司各位同事。
在过去的两年里，我在公司里工作的很开心，感觉公司的气氛就和一个大家庭一样，大家相处的融洽和睦，在公司里也学会了如何与同事相处，如何与客户建立关系等方面东西。并在公司的过去两年里，利用**公司给予学习时间，学习了新的东西来充实了自己，并增加自己的知识和实践经验。我对于公司两年多的照顾表示真心的感谢!!
在经过**年下半年的时间里，公司给予了很好的机会，让自己学习做市场方面运做，但自己缺乏市场等方面经验，自己没有能很好的为公司做好新的市场开发，自己身感有愧公司的两年的培养。
我个人感觉，我在过去的一段时间里的表现不能让自己感觉满意，感觉有些愧对公司这两年的照顾，自己也感觉自己在过去两年没有给公司做过点贡献，也自己感觉自己的能力还差的远，在公司的各方面需求上自己能力不够。经过自己慎重考虑，自己和公司考虑，自己现向公司提出辞职，望公司给予批准。
签名：
**年**月**日