0

水处理技术支持(实用20篇)

浏览

4347

范文

1000

售前技术支持工程师工作的主要职责

范文类型:制度与职责,适用行业岗位:售前,技术,工程师,工程,全文共 254 字

+ 加入清单

职责:

1、负责现场勘查工程图纸的绘制,熟悉使用AutoCAD;

2、负责将已有工程制图中,各个系统的工程量分拣成工程量清单;

3、熟悉掌握交通监控系统(信号灯系统、电子警察系统、交通诱导系统、闭路电视系统、车牌识别系统、交通设施)的原理及路口工程制图的规则;

技能要求:

1、大专以上学历、电气类、交通工程类等相关专业;

2、从事过城市交通规划、设计工作3年以上;

3、熟悉交通监控设备及设施的设计规范、清单配置、报价等相关工作内容。

4、具备较好的设计、配单、PPT制作的能力;

5、善于交流,有良好的沟通能力和协调能力。

展开阅读全文

更多相似范文

篇1:技术学校喝酒保证书

范文类型:保证书,适用行业岗位:技术,学校,全文共 603 字

+ 加入清单

_____技术状况保证书

一、严格遵守《中华人民共和国道路交通安全法》、《中华人民共和国道路运输条例》等法律法规,保证所承包_____和所驾驶_____技术状况良好。

二、认真遵守集团“_____承包营运者和驾驶员为保证_____技术状况关良好的.第一责任人”的规定,保证严格落实出车前、行车中、收车后的_____三检制度,严守操作规程,做到检查到位、杜绝隐患。

三、严格按行业管理要求,进行_____年检、技术等级评定、二级维护、_____类型等级核定(复核)、日常例保检查以及春运检审等,保证不逾期、不漏项,保证检验不合格不参加营运。

四、严格按行业管理要求,保证所承包营运_____和所驾驶_____只到具有客运_____维修资质的修理厂进行_____维修保养。

五、在上岗出车前认真检查_____制动和转向等各系统技术状况是否良好,确保_____各部机件安全可靠,保证杜绝驾驶带病_____上路行驶,保证不出机械事故。

六、做好_____日常维修保养工作,凡发现_____安全性能不合格,立即停驶修复。

七、保证灭火器、故障牌、三角木等随车安全设施齐全有效。

八、如因违反以上保证内容导致交通事故或其它纠纷的,本人自愿承担一切法律和经济责任;并同意公司取消驾驶员内部准驾资格,自愿由公司收回承包营运资格。

营运线路(营运范围):

此致

敬礼

保证人

车牌号码:

20_________年_________月_________日

展开阅读全文

篇2:技术出口合同范本_合同范本

范文类型:合同协议,适用行业岗位:技术,外贸,全文共 49001 字

+ 加入清单

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run, Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract,the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

展开阅读全文

篇3:信息技术支持及服务合同书

范文类型:合同协议,适用行业岗位:技术,服务,全文共 944 字

+ 加入清单

甲方:

乙方:

甲乙双方经友好协商,就乙方向甲方提供信息技术支持服务事宜,达成如下协议,特订立本合同。

一、甲方向乙方购买信息技术支持及服务,期限为一年,从起至止。协议到期后,如果甲方希望继续获得乙方提供的技术支持服务,则另行签订服务协议。

二、服务期限内,乙方向甲方提供信息技术支持及服务,甲方支付乙方费用: 总计人民币(小写):总计人民币(大写):

甲乙双方签订协议后5个工作日内,甲方向乙方支付全额服务费,协议正式生效。

三、乙方向甲方提供信息技术支持及服务方式和内容如下:

1、电话技术支持服务

提供7×24小时热线电话服务,工程师在线提供信息技术问题咨询和故障诊断。

2、网络在线、Email技术支持服务

提供7×24小时网络在线、Email信息技术支持服务。

3、远程在线诊断和故障排除

对于电话咨询无法解决的问题,经甲方授权乙方可通过Internet远程登录乙方网络系统进行系统维护和故障排除(需要系统和网络的支持)。

4,现场技术支持服务

对于电话、在线支持等方式无法解决的问题,根据甲方的要求乙方提供技术人员现场故障诊断和排除服务。其他现场技术支持服务包括数据迁移、系统迁移,或者由于用户硬件原因重新部署系统等内容。服务期限内,乙方根据甲方要求提供不多于6次的免费上门现场技术支持服务。如果此类现场技术服务1年内超过6次,乙方须视现有系统和实际情况酌情收取甲方操作费用,具体收费标准由甲乙双方协商确定。

5、乙方派员到达甲方完成技术服务离开时,甲方应于乙方提交的《工作单》上签章确认其到达、离开时间。在此过程中如果发生食宿和交通费用,由甲方负责支付乙方合理之食宿和交通费用。

6,现场技术培训服务

服务期限内,乙方根据甲方要求提供不多于2次,每次不少于2小时且不多于4小时的免费信息技术培训,培训地点在甲方现场,培训内容和培训时间双方协商确定。

四、甲方责任

1,甲方应向乙方提供信息技术支持及服务所涉及的各种资料和业务流程。

2、 甲方应按协议约定向乙方支付相关服务费用。

五、本合同一式贰份,双方各持壹份,一经签署,立即生效。

六、补充约定:

乙方应就甲方在服务期限内提供的各种资料和业务相关的一切业务细节、业务流程、业务逻辑(包括相关文件、资料)给予严格保密。

甲方:

授权代表签字:

日期

乙方:

授权代表签字:

日期

展开阅读全文

篇4:加盟技术合同

范文类型:合同协议,适用行业岗位:技术,全文共 518 字

+ 加入清单

甲方:

乙方:

经双方协商,一致同意,达成以下条款:

1、乙方自愿加入甲方的加盟技术行列,在合法的前提下,开展经营活动。

2、甲方向乙方传授特色熏酱技术,辣菜技术,水饺技术,并提供相应的店面装修指导,包括内部装修指导、外部统一形象装修指导。

3、甲方保证乙方(酒店或商场专柜不含档口)的区域加盟的数量限制。

4、甲方协助乙方进行选址调查。

5、乙方在合同期内必须保证一切相关技术的保密性,不得私自转让、泄露甲方的一切相关技术,如有发生,乙方将赔偿三倍于加盟费给予甲方,并撤消其加盟资格,取消标识的使用权。

6、乙方必须在工商、税务、防疫、消防等一切合法的条件下开展经营活动,否则甲方不承担任何责任。

7、合同期间,乙方应接受甲方的统一管理以及调味的监督和检查,并协助予以调整,屡次不接受调整,甲方有权取消其加盟资格,终止合同,同时取消一切标识的使用权。

8、乙方向甲方交付技术加盟费元(大写:)。该费用为一次性费用,不予退还。

9、甲方统一供酱料包、熏料包、水饺调味包,以及辣菜调料包。

10、如因不可抗力原因,甲方不承担责任。

11、如发生争议,由经济仲裁机构或人民法院解决。

12、合同执行日期: 年 月 日至 年 月 日。

甲方:

乙方:

法人:

身份证号:(法人)

展开阅读全文

篇5:购置设备技术协议范本2024最新_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 288 字

+ 加入清单

购置设备技术协议范本2019最新

大庆石油学院 学院(买方)向 (卖方)购置 设备,经双方充分协商,订立本技术协议,作为设备采购合同(合同号: )的附件,以便双方共同遵守。具体内如下:

一、技术内容

1、系统简介:

2、功能特点:

3、系统组成:

4、技术指标:

5、配置清单要求:(按组成部分列配置清单)

配置清单(样表)

6、产品设计图(实物照片):

二、产品质量标准

三、技术培训及服务

四、安装、验收标准

五、付款方式

六、企业资质文件(营业执照及税务登记复印件、法人代表授权书及其它材料)

买方:大庆石油学院*院 卖方:

经办人: (签字) 经办人: (签字)

日期: 年 月 日 日期: 年 月 日

展开阅读全文

篇6:技术员聘用合同

范文类型:合同协议,适用行业岗位:技术,全文共 2342 字

+ 加入清单

甲方(聘用单位)名称:

地址:

性质:

法定代表人(委托代理人)

乙方(被聘用者)姓名:

性别:

家庭住址:

出生年月:

身份证号码:

经甲、乙双方平等协商,自愿签订本合同。

一、聘用岗位及职务

甲方因工作需要,聘用乙方在 技术 岗位工作,并聘任 技术负责人 职务。

二、聘用合同期限

1、本合同自 年 月 日至 年 月 日止,期限为 年。试用期自 年 月 日至 年 月 日止,期限为 个月。

2、本合同自 年 月 日至合同中约定之解除或终止合同的条件出现时止。

三、工作职责、内容和工作条件

1、乙方的工作职责: 全面负责站内技术管理工作

2、具体工作内容及要求: 保持站内设备正常运行及设备保养工作

3、乙方工作时间遵照国家有关规定执行,甲方因工作需要,经与乙方协商同意,可延长工作时间,但不得超过国家劳动法律、法规的规定。

4、乙方必须按照甲方对本岗位任务和职责的要求,完成规定的数质量指标或工作任务。

5、甲方根据国家有关规定,按乙方岗位要求提供必需的工作条件和劳动保护设施,保障乙方的安全与健康。

6、甲方负责对乙方进行职业道德、业务技术、安全作业的教育和培训;乙方在工作过程中必须严格遵守工作规程,有权拒绝执行甲方违规指挥,有权提出批评、检举和控告。

四、工作报酬

1、甲方根据国家的有关规定和乙方完成工作任务的情况按月核发乙方应得的工资、奖金及各种津补贴。

2、甲方确需乙方加班时,按国家规定支付给乙方加班费。

五、工作纪律

1、甲方根据国家法律、法规的有关规定制定工作纪律和规章制度,乙方自觉遵守甲方的工作纪律和规章制度,服从甲方管理。

2、甲方应切实加强单位内部的岗位责任制,建立健全各项考核制度,做到职权清楚、责任明确、考核严格、奖惩分明。

六、社会保险和福利待遇

1、甲方依照国家法律、法规和政策规定,为乙方及时足额向社会保险部门缴纳社会保险费。社会保险费中的个人负担部分由甲方按国家规定从乙方月工资中扣除后代缴,由社会保险经办部门按规定记入缴费本人个人账户。经双方协商,也可以由乙方按规定自行缴纳。

2、乙方患职业病或因工负伤、患病或非因工负伤、以及女工孕期、产假和哺乳期间的待遇,按国家和省有关规定执行。

乙方医疗期满或痊愈后,不能从事原工作被解除聘用合同时,由甲方按国家和省的有关规定发给乙方医疗补助费。

3、乙方因工或因病死亡丧葬补助费,供养直系亲属的抚恤费、救济费、医疗费等按国家和省有关规定执行。

4、甲方保障乙方依法享受公休假日、婚丧假、带薪年休假等。

七、聘用合同的终止、解除、续订和变更

1、本合同期限届满,即行终止。

2、本合同双方约定的下列终止条件出现,即行终止:

3、本合同经甲、乙双方协商一致,可以解除。

4、乙方有下列情形之一的,甲方可以解除聘用合同:

⑴、在试用期被证明不符合聘用条件。

⑵、严重违反劳动纪律或者甲方规章制度。

⑶、连续两年考核不合格。

⑷、严重失职、渎职,营私舞弊,对甲方利益造成重大损害。

⑸、被依法追究刑事责任或劳动教养责任。

5、有下列情形之一的,甲方可以与乙方解除聘用合同,但应提前30日书面通知乙方:

⑴、乙方患病或非因工负伤,医疗期满后,不能从事原工作也不能从事甲方另行安排的适当工作。

⑵、乙方不能胜任工作,经培训或调整岗位后仍不能胜任工作。

⑶、本合同订立时所依据的客观情况发生重大变化,致使原聘用合同无法履行,经甲、乙双方协商不能就变更合同达成协议。

⑷、乙方不能履行聘用合同。

6、甲方经营发生严重困难,确需裁员时,可依法定程序裁员。

7、乙方有下列情形之一,甲方不得依本条5、6项规定解除合同:

⑴、乙方患职业病或因工负伤并被确认丧失或部分丧失劳动能力。

⑵、患病或负伤,在法定医疗期内。

⑶、女职工在孕期、产期、哺乳期内。

⑷、国家法律、行政法规规定的其它情形。

8、乙方解除本合同,应提前30日书面通知甲方。

9、有下列情形之一,乙方可随时通知甲方解除合同:

⑴、试用期内。

⑵、甲方以暴力、威胁或非法限制人身自由的手段强迫劳动。

⑶、甲方未按合同约定支付劳动报酬或提供劳动条件。

⑷、国家法律、行政法规规定的其他情形。

10、从事国家机密工作,或曾从事国家机密工作,在规定的保密期内,按国家有关规定,不得解除聘用合同。承担专业技术工作或管理工作的受聘人员,如提前解除或终止聘用合同,可能给单位代理技术项目终止、引发知识产权纠纷、技术泄密造成较大经济损失的,在聘用合同解除或终止的条件未具备时,不得提前解除或终止聘用合同。

11、甲方依据本条第3、5、6项解除合同时依法给予经济补偿金。

12、经甲、乙双方协商同意,可以续延本合同期限,办理续订手续。

13、甲方因生产经营状况发生变化,经与乙方协商同意,可变更合同有关条款内容,办理合同变更手续。

14、乙方被依法开除、劳动教养、判刑的,本合同自行解除。

15、本合同依法订立后,不因承办人或法定代表人变动而解除。

八、违反合同的责任

1、由于当事人一方的过错,造成合同不能完全履行,由有过错的一方承担违约责任;如属双方的责任,根据实际情况,由双方分别承担各自应付的违约责任。

2、当事人由于不可抗拒的原因不能履行合同的,应及时向对方通报不能履行或者需要延期履行部分合同的理由。在取得有关证明后,允许延期履行、部分履行或者不履行,并可根据情况部分或者全部免于承担违约责任。

3、当事人一方违反合同,应承担违约责任,向对方支付违约金 元;给对方造成严重经济损失的,应根据责任大小及后果追究经济赔偿责任。

4、其它违约责任:

九、双方约定的其它事项

1、甲、乙双方违反本合同赔偿的具体标准协商确定如下:

2、

十、本合同一式二份,甲、乙双方各执一份,本合同约定事项违背国家法律法规、或涂改、或未经合法授权代签无效。

甲方盖章:

甲方法定代表人(委托代理人)签章:

乙方(委托代理人)签章:

年 月 日

展开阅读全文

篇7:餐饮废弃物处理协议

范文类型:合同协议,适用行业岗位:餐饮,全文共 269 字

+ 加入清单

甲方:

身份证号码: 经营地址:

电话:

乙方:

身份证号码: 经营地址:

电话:

为规范餐饮废弃物处置管理,保证消费者餐饮安全,特签订如下协议:

1、甲方餐饮废弃物均由乙方收集,乙方不得将餐饮废弃物流入社会,用于非法用途。乙方亲自或指定专人负责上门收集与运输餐饮废弃物。

2、乙方定时运走餐厨废弃物。

3、乙方自备收集和运输餐厨废弃物的容器,保持其卫生。乙方在收集和运输餐饮废弃物时,应自觉维护环境卫生,避免污染环境。

4、本协议有效期从 年 月 日至 年 月 日。

本协议一式二份,经双方签字后立即生效。

甲方(签章): 年 月 日

乙方(签章): 年 月 日

展开阅读全文

篇8:技术服务合同书_合同范本

范文类型:合同协议,适用行业岗位:技术,服务,全文共 1478 字

+ 加入清单

技术服务合同书

合同编号:_________

委托方:_________

法定住址:_________

法定代表人:_________

职务:_________

委托代理人:_________

身份证号码:_________

通讯地址:_________

邮政编码:_________

联系人:_________

电话:_________

传真:_________

帐号:_________

电子信箱:_________

服务方:_________

法定住址:_________

法定代表人:_________

职务:_________

委托代理人:_________

身份证号码:_________

通讯地址:_________

邮政编码:_________

联系人:_________

电话:_________

传真:_________

帐号:_________

电子信箱:_________

鉴于:本合同签约各方就本合同书中所述技术秘密的技术内容、成果权益、收益分配、费用支付、违约责任以及与之相关的技术及其资料等内容经过平等协商,在真实、充分地表达各自意愿的基础上,合同双方就_________项目的技术服务(该项目属_________计划),根据《中华人民共和国合同法》之规定,达成如下协议,由签约各方共同恪守。

第一条 合同性质

本合同属于:

技术咨询合同□

技术培训合同□

技术中介合同□

第二条 服务项目名称

项目名称:_________

第三条 技术服务合同的内容、方式、和要求

技术指标和参数(或考核指标):_________

技术服务质量、期限保证:_________

技术服务方式:_________

第四条 合同履行期限、地点和方式

1.合同履行期限:本合同分以下_________个阶段履行

第一阶段:从_________年_________月_________日到_________年_________月_________日止;

第二阶段:从_________年_________月_________日到_________年_________月_________日止;

第三阶段:从_________年_________月_________日到_________年_________月_________日止;

2.合同履行地点:本合同约定在_________方所在地履行。

合同应约定履行地点,合同没有约定的,推定在接受服务方所在地履行。

3.合同履行方式:_________。

第五条 工作条件和协作事项

委托方为服务方提供如下条件:

提供资料、数据、样品、材料等包括:_________

提供场地、设施和试验条件等包括:_________

提供上述条件时间:_________

第六条 验收标准和方法

1.技术服务或者技术培训按_________标准,采用_________方式验收,由_________方出具服务或者培训项目验收证明。本合同服务项目的保证期为_________。在保证期内发现服务质量缺陷的,服务方应当负责返工或者采取补救措施。但因委托方使用,保管不当引起的问题除外。

2.验收标准:_________

3.验收方式:鉴定会、专家评估,或由接受服务方单方认可即视为验收通过。

第七条 报酬和支付方式

1.报酬:本项目报酬为(服务费或培训费):_________元。服务方完成专业技术工作,解决技术问题需要的经费,由_________方负担。

2.支付方式采用以下第_________种方式:

(1)一次总付:_________元,时间:_________年_________月_________日

共5页,当前第1页12345

展开阅读全文

篇9:空压机采购技术合同

范文类型:合同协议,适用行业岗位:采购,技术,全文共 614 字

+ 加入清单

甲方:

乙方:

甲方在承建的成都市生态水隧道施工中,租赁乙方的空压机1台在隧道施工中使用,双方本着平等互利的原则,经双方充分协商,特签订本合同,双方共同遵守。

一、租赁内容:

乙方将自有的空压机1台出租给甲方使用,空压机的日常保养和维修及操作员由乙方负责,甲方只负责机油。

二、租赁单价:

空压机在工地施工租赁单价为每个月人民币10000元,不足一个月按每月30天平均折算。空压机进场费及安装费由甲方负责,租赁时间为期一年,如果租赁期不满6个月的,那么租赁费按10个月算,出场费并由甲方支付。

三、租赁时间

自空压机进场之日起开始,但甲方至少保证租赁6个月,空压机退场之日结束,按月计算,不足一个月按天计算。

四、甲方责任:

空压机退场之前,甲方将空压机租金全部支付给乙方。乙方空压机在正常使用过程中因意外原因或不可抗力原因损坏的,由甲方负责修复赔偿。

五、乙方责任:

乙方必须安排专职人员负责空压机的`日常保养和维修,所产生的一切费用自行承担,并保证空压机在租赁期间的正常使用。乙方有责任保护好空压机。如果因乙方原因或空压机自身零部件损坏不能正常使用,乙方应负责由此产生的一切责任。乙方保养负责人及操作人员必须服从甲方的安排,确保空压机正常使用。六、违约责任:

甲乙双方方必须遵守自己的权力和义务,按合同条款履行和执行,如有哪方违约。双方有权按《中国人民民法典》到法院起诉。

本协议一式二份,双方各执一份,望双方共同遵守。

甲方:  乙方:

日期:  日期:

展开阅读全文

篇10:科研技术出资协议书_合同范本

范文类型:合同协议,适用行业岗位:科研,技术,全文共 1560 字

+ 加入清单

科研技术出资协议书

(以下简称甲方)与              (以下简称乙方)根据《合同》的基本原则就合营公司生产                    的专利技术,经友好协商,达成以下协议:

第一章、技术的内容和范围:

1-1 乙方同意甲方以制造                   的专利技作为其股份投入合营公司,甲方提供之技术必须达到《合同》第四章中规定的生产经营目的、规模。该技术包括产品技术、制造工艺、测试方法、材料配方、质量标准,人员培训。

1-2 甲方保证将本协议1-1中规定之技术全部转让给合营公司,并保证提供之技术是甲方同类技术中最先进的,设备的选型及性能质量是优良的,并符合工艺操作和实际使用的要求,该设备的选择能够符合合营公司的经营目的和生产规模.

1-3 合营公司有权使用甲方提供的                   专利和商标,在任何国家、地区销售合营公司的产品,不另需支付费用。

第二章、价格:

2-1  专利技术指乙方拥有独占专利权的专利技术,包括制造         产品所需要的设计、制造的专利技术。乙方同意甲方以专利技术作价     万美元,占合营公司注册资本的   %。如在《合同》中规定的合营期限内专利有效期截止,乙方同意以现汇补足其应缴出资额。

2-2 上述专利技术等作价出资部分不包括购买制造产品的设备及运输、仓储、税金等技术作价投资以外的内容。

第三章、技术投入和投入的条件

3-1  乙方同意从甲方取得,甲方同意向乙方转让《合同》产品的设计、制造专利技术。

3-2  乙方承认甲方在中国设计和制造《合同》产品,以及使用、销售和出口这些产品的权利,为不可转让的权利。

3-3  甲方有义务向乙方提供《合同》产品的专利技术。专利技术清单详见本协议附件1。

3-4  如果乙方需要,甲方有义务以最优惠的价格向乙方提供协议产品的零配件或材料等。届时甲、乙双方另协商签定合同。

第四章、技术的改进

4-1  甲方提供的技术资料,如有不适合于甲方生产条件的(如设计标准、材料、工艺装备及其它生产条件等),甲方有义务协助乙方修改技术资料并提交给合营公司,不另收费用。

4-2  在技术转让的有效期内,甲方和乙方在协议规定的范围内的任何改进和发展,都相互免费将改进、发展的技术资料提交给对方使用。

4-3  改进和发展的技术,所有权属于改进、发展的一方,对方不得去申请专利或转让给第三方。

4-4  合营公司对技术的改进归甲、乙双方共有,任何单方面不得单独使用;合营公司改进技术由合营公司申请专利。

第五章、考核和验收

5-1  甲方保证所交付的技术资料、图纸清晰完整、正确,能满足合营公司的设计、安装、运行和维修的要求,达到《合同》中规定的经营目的和生产规模。

5-2  为了验证甲方技术资料的正确性、可靠性,由甲、乙双方技术人员一起在甲方共同进行产品考核验收。考核验收细则见附件2。

5-3  经考核,《合同》产品符合技术资料规定的技术参数,即通过验收。甲、乙双方签署产品考核验收合格证书一式四份,甲、乙双方各执两份。

第六章、保密与侵权

6-1  甲方保证拥有本协议规定提供的                    专利技术合法所有权,并有权向合营公司转让;如果发生第三者指控侵权,甲方应负责与第三者交涉,并承担由此产生的一切法律和经济责任。

6-2  乙方同意对甲方提供的技术予以保密,如果上述技术内容的一部分或全部被第三方公布,而且合营公司获得了已公布的证据,则合营公司不再承担保密义务,并认为该技术已经失效,甲方也应以现汇如数补足注册资本之差额。保密的期限不能超过合营期限。

第七章、安装、调试和人员培训

7-1  乙方有义务接受、安排甲方技术人员和管理人员赴合营工厂进行设备安装调试、技术和管理培训。

共2页,当前第1页12

展开阅读全文

篇11:技术转让合同3_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 2545 字

+ 加入清单

技术转让合同3

合同编号:  科技合字(  )第  号

项目名称:____________________________

技术受让方:                (公章)

(甲方)

技术转让方:                (公章)

(乙方)

中 介 方:                (公章)

合同登记机关:               (公章)

签订日期:  年  月  日

合同

履行期限:  年  月  日至  年  月  日

┌──────────┬──────────────────────┐

│ 研制单位(个人) │                      │

├──────────┼──────┬─────────┬─────┤

│研制完成时间    │ 年 月 日│ 主要研制人员  │     │

├──────────┼──────┼─────────┼─────┤

│专利申请号     │      │ 专利批准号   │     │

├──────────┼──────┼─────────┼─────┤

│专利申请时间    │ 年 月 日│ 专利批准时间  │年 月 日│

├──────────┼──────┴─────────┴─────┤

│专利权的有效期限  │ 年  月  日至  年  月  日    │

└──────────┴──────────────────────┘

一、发明创造名称和内容:

二、实施许可的范围、期限和方式:

三、技术情报和资料及其保密事项:

四、技术服务的内容:

五、履行合同的计划、进度、期限、地点和方式:

六、验收的标准和方法:

七、成交金额与付款时间、付款方式:

一次总付:

分次总付:

按利润或销售额提成  %  时间:

其它方式:

八、中介方的义务和责任及收取中介服务费比例和支付方式:

九、后续改进的提供与分享:

十、违约责任:

十一、争议的解决办法:

十二、名词和术语的解释:

┌─┬──────────┬───────┬────────────┐

│ │          │ 地  址  │            │

│技│   (公章)   ├───────┼────────────┤

│术│          │ 电  话  │            │

│受│          ├───────┼────────────┤

│让│法定代表人:    │ 帐  号  │            │

│方│          ├───────┼────────────┤

│ │          │ 开户银行  │            │

├─┼──────────┼───────┼────────────┤

│ │          │ 地  址  │            │

│技│   (公章)   ├───────┼────────────┤

│术│          │ 电  话  │            │

│转│          ├───────┼────────────┤

│让│法定代表人:    │ 帐  号  │            │

│方│          ├───────┼────────────┤

│ │          │ 开户银行  │            │

├─┼──────────┼───────┼────────────┤

│ │          │ 地  址  │            │

│中│   (公章)   ├───────┼────────────┤

│ │          │ 电  话  │            │

│介│          ├───────┼────────────┤

│ │法定代表人:    │ 帐  号  │            │

│方│          ├───────┼────────────┤

│ │          │ 开户银行  │            │

├─┼──────────┴───────┴────────────┤

│鉴│ 意见:                            │

│证│                   经办人:        │

│单│    (公章)                       │

│位│                     年  月  日   │

├─┼───────────────────────────────┤

│公│ 意见:                           │

│证│                   经办人:        │

│机│    (公章)                       │

│关│                     年  月  日   │

└─┴───────────────────────────────┘

〔说明〕

1.“合同类型”一项要写明专利实施许可合同,并注明是普通实施许可合同、排他实施许可合同或者独占实施许可合同。

普通实施许可合同是最常见的专利实施许可方式。指转让方许可受让方在一定范围内实施转让方所有或者持有的专利所订立的合同。

排他实施许可合同,是转让方和受让方约定分享专利实施权的协议。转让方不得在已许可受让方实施专利的范围内,就该项专利与第三方订立专利实施许可合同,但可以保留实施该项专利的权利。

独占实施许可合同,是转让方将专利实施权移交受让方所订立的协议。转让方不得在已许可受让方实施专利的范围内,就该项专利与第三方订立专利实施许可合同,自己也不得实施该项专利。

2.在“实施许可的范围、期限和方式”一项,如果转让方许可受让方向第三方分售专利实施许可时,应约定分售的条件及有关事项。没有约定时,应视为受让方在整个的专利权存续期间实施专利,不受地区和方式的限制,但不得与第三方订立专利实施许可合同。

3.“技术服务项目”一项,指转让方派出专业技术人员进行技术指导的项目、内容、工作期限和有关事项。

4.“后续改进的成果分享”一项应规定在合同成立以后,双方在原有专利基础上加以改进所完成的新的技术成果是否向对方提供,以及如何互惠使用。

展开阅读全文

篇12:技术转让合同书「最新」_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 1503 字

+ 加入清单

技术转让合同书「最新」

受让方:_________(甲方)

转让方:_________(乙方)

依据《中华人民共和国合同法》的规定,经协商一致,签订本合同。(该项目属_________计划)。

一、技术秘密的内容、要求和工业化开发程度:

二、技术情报和资料及其提交期限、地点和方式:

乙方自合同生效之日起_________天内,在_________(地点),以_________方式,向甲方提供下列技术资料:_________。

三、本项目技术秘密的范围和保密期限:

四、使用非专利技术的范围:

甲方:_________。

乙方:_________。

五、验收标准和方法:

甲方使用该项技术,试生产_________后,达到了本合同第一条所列技术指标,按_________标准,采用_________方式验收,由甲方出具技术项目验收证明。

六、经费及其支付方式:

(一)成交总额:_________元。

(二)支付方式(采用以下第_________种方式):

1.一次总付:_________元,时间:_________年_________月_________日;

2.分期支付:_________元,时间:_________年_________月_________日;

3.按利润_________%提成,期限:_________;

4.按销售额_________%提成,期限:_________;

5.其它方式:_________。

七、违约金或者损失赔偿额的计算方法:

违反本合同约定,违约方应当按《中华人民共和国合同法》规定承担违约责任。

(一)违反本合同第_________条约定,_________方应当承担违约责任,承担方式和违约金额如下:_________。

(二)违反本合同第_________条约定,_________方应当承担违约责任,承担方式和违约金额如下:_________。

八、技术指导的内容(含地点、方式及费用):_________。

九、后续改进的提供与分享:

本合同所称的后续改进,是指在本合同有效期内,任何一方或者双方对合同标的的技术成果所作的革新和改进。双方约定,本合同标的的技术成果后续改进由_________方完成,后续改进成果属于_________方。

十、解决合同纠纷的方式:

执行本合同发生争议,由当事人双方协商解决。协商不成,双方同意由_________仲裁委员会仲裁(当事人双方不在本合同中约定仲裁机构,事后又没有达成书面仲裁协议的,可由人民法院起诉)。

十一、名词和术语的解释:

十二、其它(含中介方的权利、义务、服务费及其支付方式、定金、财产抵押、担保等上述条款未尽事宜):

受让方(甲方)(盖章):_________ 转让方(乙方)(盖章):_________

通讯地址:_________ 通讯地址:_________

联系人(签字):_________ 联系人(签字):_________

电话:_________ 电话:_________

开户银行:_________ 开户银行:_________

帐号:_________ 帐号:_________

邮政编码:_________ 邮政编码:_________

法定代表人(签字):_________ 法定代表人(签字):_________

委托代理人(签字):_________ 委托代理人(签字):_________

_________年____月____日 _________年____月____日

签订地点:_________ 签订地点:_________

展开阅读全文

篇13:技术培训合同

范文类型:合同协议,适用行业岗位:技术,培训,全文共 926 字

+ 加入清单

甲方(单位):

乙方(劳动者):

甲方因工作需要,决定选派乙方参加______专业技术培训,为确保乙方圆满完成培训学业并按时返回甲方工作,根据《中华人民共和国劳动合同法》第二十二条及甲方的有关规定,双方本着平等自愿的原则,经双方协商一致订立如下协议:

一、甲方同意乙方赴______(地点)参加由______机构组织的______专业技术培训,培训时间:自__年__月__日至__年__月__日。

二、乙方应在本协议规定的培训机构和专业接受培训,不得任意变更。

三、培训费用支付。培训学费共计人民币______元,可由甲方先行支付。

四、乙方通过培训后,未取得合格成绩者,培训费用由乙方个人进行全部承担。

六、乙方培训后至少为甲方服务__年,若乙方违反劳动合同、违反甲方规章制度或提前解除劳动合同,导致培训后为甲方的服务期限不满,乙方需支付违约金给甲方,违约金的计算方法: 违约金=因培训所产生的费用总额___未服满服务期/约定服务期 因培训所产生的费用包括:培训之学费、办理相关证件费用、培训期间所发生的住宿、膳食、交通等费用;乙方脱产培训时单位支付的工资和奖金,也是培训费用的组成部分。

七、乙方应自觉遵守培训方的各项规定和要求,凡因违规违纪产生的损失和责任由乙方承担。

八、乙方培训后应及时返回并向甲方报到,并应整理出一套完整的学习资料及时交于甲方,不得截留。

九、乙方在接受培训后需将所学用于实践工作,为甲方创造相关效益,并按照甲方要求承担甲方相应的内部培训工作。

十、乙方无逾期不归和受训期从事超越学习范围的业余活动行为,无擅自更改培训方向与内容等行为,圆满完成学业,在向公司行政报到后一周内,甲方予以报销除学费外的交通费、书杂费、住宿费等其它因参加培训乙方垫付的费用。

十一、乙方多次参加专业技术培训,其服务期在前次服务期满后之日,后一次计算开始计算。

十二、本协议未尽事宜,以国家法规和甲方规章制度和文件、惯例为准。如发生任何争议,甲乙双方应友好协商解决,协商不成,以司法程序在甲方所在地解决。

十三、本协议作为劳动合同书的附件,具有相同法律效力。

十四、本协议双方签字盖章后生效,一式两份,双方各执一份。

甲方:

乙方:

注册地址:

地址:

法定代表人:

身份证号码:

年 月 日

展开阅读全文

篇14:专用技术许可合同范本_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 7814 字

+ 加入清单

专用技术许可合同范本

以下专用技术许可合同范本由第一范文网站提供,供大家参考。

合同号:_________

签订日期:_________年_________月_________日

签订地点:_________

本专有技术许可合同(以下简称合同)是由公司_________(根据_________国法律成立注册的公司,以下简称许可方)为一方与_________公司(根据中华人民共和国法律成立注册的公司,以下简称被许可方)为另一方,双方通过友好协商而签订的。

鉴于许可方长期从事设计、制造、安装、销售_________(以下简称合同产品);

鉴于许可方拥有设计、制造、安装、检验合同产品的有价值且成熟的专有技术;

鉴于许可方有权并且同意向被许可方授权利用与合同产品相关的专有技术;

鉴于被许可方希望获得许可其利用该专有技术制造、使用和销售合同产品。

许可方与被许可方同意就以下条款签订本合同。

第一章 定义

除另有明确的规定外,下列术语具有所指明的含义:

1.1 验收标准是指合同产品在验收测试中符合的标准,详见附件一。

1.2 商业性生产是指工作现场生产_________(数量)合格产品后的正常运行和生产

1.3 合同产品是指与用专有技术和技术资料设计、制造、安装或检验的各类产品,详见附件_________。

1.4 合同生效日期是指本合同的双方政府有关当局中的最后一方批准合同的日期。

1.5 目的地机场是指中华人民共和国的_________机场。

1.6 改进是指在合同有效期内由合同的任何一方以新设计、规则、处方、成分、数值、参数、计算或任何其它指标的形式对本专有技术进行的新发明和/或修改。

1.7 工作现场是指被许可方以使用许可方提供的专有技术和技术资料制造合同产品的场所,即中华人民共和国_________省、_________市、_________工厂。

1.8 专有技术是指本合同生效前尚不为公众或被许可方所知晓、由许可方开发、所有或合法取得、占有并由许可方披露给被许可方的关于设计、制造、安装、合同产品的检验等方面的任何有价值的技术知识、资料、数值、图纸、设计和其它技术信息,许可方已采取了适当措施使专有技术处于保密状态,专有技术的具体描述规定在附件二中。

1.9 许可方的银行是指_________。

1.10 被许可方的银行是指_________。

1.11 净销售价是指被许可方对合同产品的销售或以正常的、善意的商业交易中的其它处理方法的发票价格扣除销售折扣、回扣、退货、佣金、间接税、保险费、运费、包装费、进口合同产品的原材料、半成品、零配件关税等方面的费用以及与销售合同产品直接有关的支出。(付款为入门费加提成)

1.12 提成期是指自商业性生产开始至本合同到期或终止的期间,提成期内,被许可方应向许可方支付提成费。(付款为入门费加提成)

1.13 技术资料是指许可方拥有和/或开发的正受保护或不受保护的图纸、说明、技术数据、程序、技术和质量标准和其它的有据的技术信息,包括计算机程序、专有技术的解释和说明、涉及到合同产品的设计、制造、安装和检验等方便的信息,许可方对披露上述资料有充分的、自由的权利。技术资料的具体描述,详见附件二。

1.14 技术服务是指许可方向被许可方提供的与合同项下的专有技术开发有关的技术指导和监督,详见附件三。

1.15 技术培训是指许可方向被许可方提供的与合同项下的专有技术开发有关的技术培训,详见附件四。

第二章 许可授予

2.1 许可方同意向被许可方授予、被许可方同意从许可方获得合同产品的设计、制造的专有技术和在中华人民共和国境内使用和销售合同产品的权利,这种权利是非独占的、不可转让的。合同产品的名称、型号、规格、技术数据和验收标准,详见合同附件一。

2.2 许可方同意授予被许可方将合同产品出口到_________(国家)。

2.3 许可方同意授予被许可方在合同有效期内采用许可方对专有技术的改进。

2.4 许可方不得禁止被许可方在合同期满后继续使用专有技术和改进技术。

第三章 价格和支付(适用于一次总支付)

3.1 考虑到许可方全面且适当履行其合同义务,被许可方同意向许可方支付合同总价为_________(币种)_________(大写:_________),该款项以电汇方式通过被许可方银行转至许可方银行。具体分项如下:

3.1.1 许可费:_________(大写:_________);

3.1.2 设计费:_________(大写:_________);

3.1.3 技术资料费:_________(大写:_________);

3.1.4 技术服务费:_________(大写:_________);

3.1.5 技术培训费:_________(大写:_________)。

3.2 上述合同总价为固定价格,包括了与技术资料的交付、技术服务和技术培训的提供等所有支出与费用,其技术资料价格为ddu目的地机场交付价。

3.3 本章第3.1条a、b、c、e项所规定的合同价格将由许可方依照下列方式和比例支付给被许可方:

3.3.1 该款的_________%,即_________(大写:_________)在被许可方收到许可方提交的下列单据并经审核无误后_________天内支付给许可方:

a.许可方国家有关当局出具的有效出口许可证或不需出口许可证的证明文件,正本一份,副本二份;

b.许可方银行出具的金额为_________元(大写:_________)以被许可方为受益人的对预付款的不可撤销保函正本一份,副本一份,保函格式件合同附件。

c.金额为合同总价的形式发票一式五份;

d.签发的标明支付金额的商业发票一式五份;

d.即期汇票一式二份。

3.3.2 该款的_________%,即_________(大写:_________)在被许可方收到许可方提交的下列单据并经审核无误后_________天内支付给许可方:

a.标明“运费已付”的技术资料空运提单或交付技术资料的空运挂号收据,正本一份,副本三份;

b.签发的标明支付金额的商业发票一式五份;

c.即期汇票一式二份。

3.3.3 该款的_________%,即_________(大写:_________)在被许可方收到许可方提交的下列单据并经审核无误后_________天内支付给许可方:

a.双方授权代表签署的验收证书一份;

b.签发的标明支付金额的商业发票一式五份;

c.即期汇票一式二份。

3.3.4 该款的_________%,即_________(大写:_________)在被许可方收到许可方提交的下列单据并经审核无误后_________天内支付给许可方:

a.双方授权代表签署的保证到期的证书一份;

b.签发的标明支付金额的商业发票一式五份;

c.即期汇票一式二份。

3.4 本章第3.1条d项规定的技术服务费在许可方的第一批技术人员到达工作现场后每_________月且被许可方收到许可方提交的下列单据并审核无误后_________天内,由被许可方按照实际应付款支付给许可方:

3.4.1 双方授权代表签署的“工时卡”一份;

3.4.2 签发的标明支付金额的商业发票一式五份;

3.4.3 即期汇票一式二份。

3.5 如果依据合同许可方应支付预提税、违约金和/或赔偿金,被许可方有权从应支付给许可方的款项中扣除。

3.6 所有在被许可方银行发生的费用均由被许可方承担,所有在被许可方银行外发生的银行费用由许可方承担。

第四章 技术资料

4.1 许可方向被许可方提供的技术资料须用公制、英文制定,并在本合同生效之日起_________天内以ddu目的地机场价格条件(1990国际贸易术语解释通则)交会,技术资料的内容、份数和交付时间表等,详见合同附件二。

4.2 被许可方提供的技术资料应具有适合于多次搬运、长途运输、防潮、防雨的包装。

4.3 每件技术资料的包装封面上,应以英文标明下述内容:

4.3.1 合同号:

4.3.2 收货人:

4.3.3 目的地机场:

4.3.4 标记:

4.3.5 以公斤计算的手重:

4.3.6 箱号或件号:

4.4 许可方应在每件包装箱内附技术资料的详细清单一式二份,并注明技术资料的序号、文件代号、名称和页数。

4.5 在交付技术资料前一周,许可方应将此次所发运的技术资料大约件数、大约毛重和预计到达目的地机场的时间等以传真形式通知被许可方。

4.6 在每批技术资料发运后二十四小时内,许可方应将合同号、交付日期、航空提单号、航空提单日期、航班号、文件代号、批号和重量等详细内容用传真通知被许可方,同时,许可方应向被许可方特快专递航空提单和所交付的技术资料详细清单各一式二份。

目的地机场在航空提单上的印戳日期视为技术资料实际交付日期。

4.7 如果许可方没能按照合同附件二规定的交付时间表交付技术资料,许可方应按照下列比例向被许可方支付迟延交付的违约金:

4.7.1 第一至第四周,每周支付合同总价的百分之_________;

4.7.2 第五至第八周,每周支付合同总价的百分之_________;

4.7.3 从迟延的第九周起,每周支付合同总价的百分之_________。在计算违约金时,不足一周按一周计。

4.8 迟延交付的违约金总额不得超过合同总价的百分之_________。迟延交付违约金的支付并不免除许可方交付技术资料的义务。

4.9 如果技术资料可以由许可方当面直接交给被许可方的,许可方应提前将其意图和预计交付的时间用传真的方式通知被许可方,当面交付的具体签收形式和其它细节应由双方协商一致。

4.10 如技术资料在交付过程中发生丢失、损坏、短缺,许可方应在收到许可方书面通知后_________天内,免费补寄或重寄给被许可方。

第五章 技术服务和技术培训

5.1 许可方应按照合同规定派遣身体健康、技术熟练、称职的技术人员到工作现场提供技术服务,技术服务的人数、专业、内容、时间表和要求等详见合同附件三。

5.2 被许可方应为许可方的技术服务人员申请签证、工作许可和/或提供技术服务所需的其它必要手续提供协助。

5.3 如果许可方所派遣技术人员被认为不称职,许可方应自费并且毫不迟延地予以替换。

5.4 许可方技术人员在华期间应遵守中华人民共和国法律和工作现场的规章制度。

5.5 被许可方有权按照合同规定派遣技术人员到许可方的有关工厂进行培训,许可方有义务按照合同规定提供技术培训并尽自己最大努力使被许可方的技术人员掌握本专有技术。培训人员的数量、专业、和待遇、内容、时间和要求等详见合同附件四。

5.6 许可方应为被许可方的培训人员申请签证、工作许可和/或接受培训所需的其它必要手续提供协助。

5.7 被许可方接受培训人员在许可方国家期间应遵守许可方国家的法律和许可方工厂的规章制度。

第六章 验收考核

6.1 为了验证专有技术的正确性和可靠性,许可方应派遣其技术人员到工作现场在被许可方技术人员的协助下进行验收考核,考核应在技术资料交付后_________天内根据合同附件五规定的程序进行。

6.2 考核前,双方应根据合同附件五的规定审核考核的可用设施、技术人员和必要的原材料,双方授权代表应共同签署一份确认声明。

6.3 如果经考核各项验收标准符合规定,双方授权代表应在验收考核通过之日五个工作日内签署验收考核合格证书一式四份,双方各持二份。

6.4 如果经考核任何一项验收标准不符合规定,许可方应在第一次考核失败之日起_________天内或双方协商的任何时间自费组织进一步考核,但考核次数最多不得超过_________次。

6.5 如果在如下的考核中仍不能达到验收标准,除非合同另有规定,许可方应按照合同附件一的规定赔偿被许可方违约金,被许可方应在收到违约金后签署验收证书,但许可方的保证义务并没有免除。

第七章 保证与索赔

7.1 许可方保证是本专有技术的合法所有者或持有者,并且有权许可被许可方使用。

7.2 许可方保证本专有技术是最新的现代化用的,能依照合同附件二的规定予以开发。

7.3 许可方保证合同附件一规定的合格的合同产品能在工作现场采用本专有技术制造出来。

7.4 许可方保证所提供的技术资料是完整的、正确的、清晰的,并保证能按合同附件二的规定及时交付。

7.5 许可方保证按时派遣合格的技术人员提供正确和充分的技术服务和技术培训。

7.6 本专有技术在工作现场的保证期为验收通过之日后的_________个月,详见合同附件五。保证期满,被许可方的授权代表应签署一份保证期满证书给许可方。

7.7 许可方保证不会发生被许可方被指控有关合同产品上的侵权责任。

7.8 如果许可方不能履行上述任何一项保证义务,除非合同另有规定,被许可方有权要求许可方承担违约责任和/或索赔损失,和/或要求被许可方赔偿损失和/或因此发生的一切费用支出。如果被许可方在收到许可方的上述书面通知后十四天内不予答复,视为其已接受被许可方的要求。

第八章 侵权赔偿

8.1 许可方应保护被许可方在使用本专有技术中不受任何第三方的索赔或诉讼指控。如果第三方指控被许可方非法使用或侵权,则许可方应以被许可方名义自费与第三方交涉并承担由此引起的一切法律和经济责任,必要时,被许可方应向许可方提供抗辩上的协助,但所支出的费用由被许可方予以弥补。

8.2 如果被许可方发现在其被许可地区有第三方非法使用本专有技术,应毫不迟延地通知许可方,许可方在收到被许可方的通知后_________天内应采取必要措施阻止该非法使用,否则,许可方可应要求授权被许可方根据中国的法律要求对非法的第三方提起诉讼并向被许可方提供一切必要的协助,被许可方承担诉讼所发生的费用,然后有权向许可方索偿。

第九章 解除合同

9.1 对许可方的下列违约行为,被许可方可书面通知的方式全部或部分解除合同,并不影响其采取其它补救措施:

9.1.1 在合同附件二规定的交付技术资料期限后_________天内仍不能交付部分或全部技术资料;

9.1.2 无法使合同产品达到合同附件一规定的最低验收标准。对上述解除合同,许可方应退还被许可方已支付的所有金额,并按年利率百分之_________加付利息。

9.2 如果一方有下列行为,任何一方可书面通知对方全部或部分解除合同,并不影响其采取其它补救措施:

9.1.1 没有履行合同规定的保密义务;

9.1.2 没有履行合同规定的其它义务,轻微的违约除外,并在收到对方书面的通知后_________天内或双方商定的时间内对其违约予以弥补;

9.1.3 破产或无力偿还债务;

9.1.4 受不可抗力事件影响超过一百二十天。

第十章 保密

10.1 合同有效期内,双方应采取适当措施对本专有技术和技术资料予以严格保密,未经许可方的书面同意,被许可方不得将本专有技术泄露给任何第三方。

10.2 一方和其技术人员在履行合同过程中所获得或接触到的任何保密信息,另一方有义务予以保密,未经其书面同意,任何一方不得使用或泄露从他方获得的上述保密信息。

10.3 保密义务不适用于下列信息:

10.3.1 现在或以后进入公共领域;

10.3.2 可以证明该技术在泄露时自己就拥有,并不是以前从对方直接或间接获得的;

10.3.3 任何一方从第三方处合法获得的。

第十一章 改进与回授

11.1 在合同有效期内,如果许可方对本专有技术有所改进,许可方应免费将该改进许可被许可方非独占性使用。

11.2 被许可方有权对本专有技术予以改进,此类任何改进的独占权利属于被许可方所有。被许可方应将其改进通知许可方并免费回授给许可方非独占性使用。

11.3 双方有义务对专有技术的改进予以保密。任何一方未经另一方书面同意无权将在另一方技术改进基础上的分售许可证授予第三方。

第十二章 税费

12.1 中华人民共和国政府根据其税法对被许可方征收的与执行本合同或与本合同有关的一切税费均由被许可方负担。

12.2 中华人民共和国政府根据中国税法和中华人民共和国政府与许可方国家政府签订的避免双重征税和防止偷逃所得税的协定而向许可方课征的各项税费均由许可方支付。被许可方依据本国的税法有义务对根据本合同而应得的收入按比例代扣一定的税费并代向税务机关缴纳,在收到税务机关出具的关于上述税款税收单据后,被许可方应毫不迟延地转交给许可方。

12.3 中华人民共和国以外所发生的与本合同有关和履行本合同的各项税费均由许可方承担。

第十三章 不可抗力

13.1 任何一方由于战争及严重的火灾、台风、地震、水灾和其它不能预见、不可避免和不能克服的事件而影响其履行合同所规定的义务的,受事故影响的一方将发生的不可抗力事故的情况以传真通知另一方,并在事故发生后十四天内以航空挂号信件将有关当局或机构出具的证明文件提交另一方证实。

13.2 受影响的一方对因不可抗力而不能履行或延迟履行合同义务不承担责任。然而,受影响的一方应在不可抗力事故消除后尽快以传真通知另一方。

13.3 双方在不可抗力事故停止后或影响消除后立即继续履行合同义务,合同有效期和/或有关履行合同的预定的期限相应延长。

第十四章 仲裁

14.1 凡因本合同引起的或与本合同有关的任何争议,均应提交中国国际经济贸易仲裁委员会,按照申请仲裁时该会现行有效的仲裁规则在深圳进行仲裁,仲裁裁决是终局的,对双方均有约束力,仲裁适用中华人民共和国法律。

14.2 除非另有规定,仲裁不得影响合同双方继续履行合同所规定的义务。

第十五章 合同的生效及其它

15.1 本合同在双方授权代表签字后,如果需要,由各方分别向本国政府当局申请批准。双方应尽一切努力使合同在签字后30天内获得各自国家当局的批准,各方应立即将批准日期书面通知对方。最后一方的批准日期为本合同生效日期。

15.2 本合同有效期自合同生效之日起为_________年。

15.3 本合同期满时,合同项下的任何未了的债权债务不受合同期满的影响。

15.4 未经另一方事先的书面同意,任何一方无权将其合同项下的权利和责任转让给第三方。

15.5 本合同的附件为本合同不可分割的组成部分,与合同正文具有同等法律效力。如合同正文与附件有矛盾之处,合同正文内容优先。

15.6 所有对本合同的修订、补充、删减、或变更等均以书面完成并经双方授权代表签字后生效。生效的修订、补充、删减、或变更构成本合同不可分割的组成部分,与合同正文具有同等法律效力。

15.7 双方之间的联系应以书面形式进行,涉及重要事项的传真应随后立即以挂号信件或特快专递确认。

15.8 本合同用中英文两种文字写成,两种文字具有同等效力。本合同正本一式四份,双方各二份。

15.9 许可方应以最优惠价格向被许可方提供零部件、原材料和制造合同产品所需的标准件,双方应适时就此签署一份独立的协议,作为本合同的附件。

被许可方(盖章):_________ 许可方(盖章):_________

授权代表(签字):_________ 授权代表(签字):_________

地址:_________ 地址:_________

邮编:_________ 邮编:_________

电话:_________ 电话:_________

传真:_________ 传真:_________

展开阅读全文

篇15:劳动协议技术人员

范文类型:合同协议,适用行业岗位:技术,全文共 799 字

+ 加入清单

甲方:________________

乙方:________________

一、合同期限

本合同期限自签订之日起计算,即 ________年 ________月 ________日至 ________年 ________月 ________日止。

二、甲方现聘请乙方为_______(职位)负责工作。

三、劳动报酬

甲方按照政府与学校教职员工的有关规定工资的规定,制定本工资制度,并根据乙方的工作岗位,确定乙方的工资形式和工资标准。在乙方正常工作的情况下,甲方保证每月如期发放工资。甲方给予乙方月基本工资为 ________元,职务工资 ________元,绩效工资 ________元。

四、对乙方的工作要求和劳动纪律

1、乙方须按甲方要求提供所需入职资料,做为本合同的附件,是本合同的有效组成部份。(包括身份证的复印件、学历证书、教师资格证复印件、家庭成员情况等)。如乙方作虚假陈述或伪造证件,一经查出,立即解除劳动合同。

2、乙方应自觉遵守国家的政策法规和学校的规章制度,根据岗位标准和工作职责,按质按量按时完成本职工作和甲方交办的其他任务,并对甲方负责。甲方将定期检查、考核乙方履行工作职责情况。

3、乙方不得同时在其他经济组织或其它工作单位任职或兼职。

4、乙方在正常上班期间必须遵守学校上班制度。

5、乙方有保守学校办公室秘密的义务,任何时候均不得窃取、泄露学校核心机密。

五、违约协议

1、乙方违约将承担所造成的损失的责任并扣除1000元人民币,甲方违约将按照劳动法进行赔偿。

六、本合同一式二份,甲乙双方各执一份,自双方签字盖章之日起生效,具同等法律效力。

甲方(盖章):________________乙方(签字):________________

法人代表人:________________

________年 ________月 ________日________年 ________月 ________日

展开阅读全文

篇16:水处理服务合同

范文类型:合同协议,适用行业岗位:服务,全文共 602 字

+ 加入清单

处理服务合同

定作方:________________(以下简称甲方)

承揽方:_______________科技开发有限公司(以下简称乙方)

双方就甲方的瓦窑蒸汽发生器(位于____区____镇原砖厂内)的水处理服务达成如下协议:

1、蒸汽发生器水系统使用pm型软水剂。

2、双方互洽蒸汽发生器日(24小时)补水量(用水量)为____吨/日。经现场提取水样并分析,补给水水质硬度为____mmol/l。

3、加_____:1.6~2㎏/日(50~60㎏/月)。

4、价格及结算方式:采用包干的形式,____元/月(供软水剂两桶〈____㎏/桶_____________桶〉,用户自提,付款提货)。

5、服务期限:暂定为壹年。

6、服务承诺:

使用pm型软水剂,在严格按使用说明书,按时、按量加药,正常排污,保证连续使用的情况下,受热面平均垢厚大于____㎜以上,乙方负责提供清洗服务,费用全免。

乙方对甲方的药剂的使用情况进行定期或不定期回访,使用情况由双方签字记录认可。对违反以上约定的任何一条,合同即废止。

附:软水剂使用说明书。

合同一式三份,甲方一份,乙方二份。本合同自____年____月____日起执行。

定作方:(章)承揽方:(章)

代表签字:?代表签字:

地址:?地址:____大街____号

电话:?电话:

展开阅读全文

篇17:技术支持主管的具体职责

范文类型:制度与职责,适用行业岗位:技术,经理,全文共 205 字

+ 加入清单

职责:

1、 负责实验室相关项目的工作;

2、 办公室事物的处理

4、 公司相关项目前期调研、资料收集、方案拟定以及实施;

5、 负责编制、整理与保管相关项目技术资料(专利、技术方案、成果转化资料等);

任职要求:

1、 生物、医学、药学、检验、生物工程、生物化学、食品、动物、植物专业背景,有环境微生物开发经验者优先;

2、 热爱实验室技术工作并保持稳定;

3、 计算机二级,英语CET-4级;

4、 具有科研院所背景者优先。

展开阅读全文

篇18:高级专门技术人才培养协议

范文类型:合同协议,适用行业岗位:技术,猎头,全文共 742 字

+ 加入清单

为了培养更多高级专门技术_____,应_________(甲方)的要求,_________(乙方)从年全国统一招收的博士生中录取_________(丙方)为_________专业研究方向委托培养博士研究生。

一、丙方由乙方负责培养和管理,学制三年。

二、丙方培养费每人每学年_________元整。甲方须在每学年开学前将当年的培养费汇入或交付乙方,否则其丙方不能办理注册手续。丙方若延长学业甲方须续交培养费每学期(不足一学期按一学期计算,以此类推)人民币_________元整;若丙方培养费未付清,则毕业论文不予答辩,并按乙方有关规定处理。如因故退学所交费用不予退回。

三、丙方在读期间,其人事档案、户口、工资等仍保留在甲方,医疗费用、副食品补贴、困难补助及其它待遇均由甲方负责,党团组织关系需转至乙方。

四、乙方依照国家及_________研究生教育的有关规定对丙方进行培养与管理,丙方在读期间如违反校纪校规或由于其它原因不宜继续培养,乙方将终止其学业并退回甲方。

五、丙方毕业前如申请博士后工作或出国留学,须由甲方出具同意公函。

六、丙方毕业后仍回甲方工作。其学籍档案由乙方转至甲方(含毕业证书、学位证书)。

七、本协议未尽事宜,由协议各方另行议定。自生效日起,任何一方不得违反或无故中止协议。否则,由此而造成对另方的经济损失应予赔偿。

八、本协议经甲、乙、丙三方签字并加盖公章后生效。本协议一式三份,甲、乙、丙双方各执一份。

甲方(盖章):________ 乙方(盖章):________

代表(签字):________ 代表(签字):________

________年____月____日 ________年____月____日

丙方(签字):________

________年____月____日

展开阅读全文

篇19:技术支持主管的具体职责

范文类型:制度与职责,适用行业岗位:技术,经理,全文共 303 字

+ 加入清单

职责:

1、领导和管理售前、售后技术团队,制定并不断完善技术支持方案。

2、收集班主任或电销人员反馈问题,配合技术和研发部门解决疑难问题。

3、根据公司产品与研发部提供的资料,负责部门内部及相关人员的技术培训。

4、负责技术支持团队内部梯队建设,人员培养,并辅助完成绩效考核等工作;

任职资格:

1、计算机相关专业,大专及以上学历,3年以上技术支持的工作经验;

2、了解计算机网络、安全、存储、服务器虚拟化等领域专业技术,有单独负责项目的经验。

3、具备较强的技术背景与实践技能,熟悉本行业售前、售中、售后运营流程;

4、具有较强的项目管理能力及团队管理经验;

5、具有较强的沟通协调和解决困难的能力,应变能力强,抗压能力强。

展开阅读全文

篇20:网站建设技术咨询合同

范文类型:合同协议,适用行业岗位:技术,全文共 1080 字

+ 加入清单

甲方:

乙方:

依据《中华人民共和国民法典》的规定,甲、乙双方就网站建设服务、软件技术服务事项的内容,经双方协商一致,本着平等互利的原则,特订立以下合同条款,以兹遵守。

一、服务内容

乙方向甲方提供网站建设服务、软件技术咨询、指导服务。

二、协议期限

本合同有效期为一年,自年月日至年月日。

三、甲方的权利和义务

1、提供专人与乙方联络;

2、提供服务所需的资料给乙方,并保证资料的合法性和正确性;

3、按照合同要求及时、足额支付服务费用;

4、甲方将在著作版权法的范围内使用本合同标的及相关作品、程序、文件源码,不得将其复制、传播、出售或许可给其它第三方;

5、甲方对合同中的网站建设的网页、图像享有排它的使用权;

6、应向乙方提供详细的软件使用环境说明、发现问题时的程序报错信息,并将这些信息及时提交给乙方。

四、乙方的权利和义务

1、提供专人与甲方联络;

2、在合同要求的期限内,完成甲方网站的建设维护和软件技术服务,并及时通知甲方进行验收;

3、在验收期内甲方要求下,对不合格的地方进行修改;

4、向甲方提供软件安装、使用、模板制作等各类咨询服务,对服务范围内的问题通过电子邮件、电话、传真等方式及时(两天之内)答复;

5、对甲方公司的商业机密进行保密。

五、费用的支付

1、费用以乙方每次提供服务实际发生费用为准,于服务工作结束后以服务确认单的形式进行确认;

2、甲方于双方共同签署服务确认单7日内以现金、转账支票或者汇款的方式向乙方支付费用;

3、乙方账户信息:

开户行:

账号:

六、违约责任

1、任何一方有证据表明对方已经、正在或将要违约,可以中止履行本合同,但应及时通知对方,若对方继续不履行、履行不当或者违反本合同,该方可以解除本合同并要求对方赔偿损失。

2、因不可抗力而无法承担责任的一方,应在不可抗力发生的3天内,及时通知另一方;

3、一方因不可抗力确实无法承担责任,而造成损失的,不负赔偿责任;本合同所称不可抗力是指不能预见、不能克服并不能避免且对一方当事人造成重大影响的客观事件,包括但不限于自然灾害如洪水、地震、火灾和风暴等以及社会事件如战争、动乱、政府行为等。

七、其它

1、如果本合同任何条款根据现行法律被确定为无效或无法实施,本合同的其它所有条款将继续有效;此种情况下,双方将以有效的约定替换该约定,且该有效约定应尽可能接近原约定和本合同相应的精神和宗旨;

2、甲乙双方发生争议应先协商解决,协商不成的,任意一方均有权向合同签署地的人民法院提起诉讼;

3、本合同经双方授权代表盖章之日起生效;

4、本合同一式两份,双方当事人各执一份,具有同等法律效力。

甲方:乙方:

代表人:代表人:

日期:日期:

展开阅读全文