一般出口货物基本流程汇集20篇

商品车运输合同

甲方：_________________

乙方：_________________

经甲乙双方协商,在平等、自愿、协商一致的基础上,就商品车运输双方达成以下协议,供双方共同遵守。

一、甲方将完整的商品车交付于乙方送于经销商。

二、乙方要按甲方要求按时送达,保证车辆完好。

三、在运输途中若发生任何交通事故及人员伤害,与甲方无关,所有责任由乙方承担。

四、商品车若在运输途中损坏,由乙方全款买断。

五、本协议自签定之日起,为期一年。

六、本协议一式两份,甲乙双方各执一份,签字后生效,具有法律效力。

甲方签字：_________________乙方签字：_________________

_____年_____月_____日 _____年_____月_____日

方责任：

1.乙方负责与国外供货商联络，确定货物的规格、质量、数量和价格条件;

2.承担进出口过程中发生的一切费用(银行费用、换单费、保险费、报关报检费、检验检疫费、运输费、仓储费等)，将上述款项直接支付给相关收款单位或交给第三方代付;

3.乙方应在接到关税和海关代征增值税税票后按时向代收银行缴纳税款;

4.如代理进出口商品属免税、许可证商品，乙方负责办理相关的手续或证明，由此引起的一切责任和损失由乙方负担;

5.守法经营，不伪报、不满报，单单相符、单货相符、如实申报、提供货物的真实情况，对于伪报商品名称、夹带走私物品、高值低报、少报通关数量等违反相关法律法规的行为，乙方承担一切责任和后果，并赔偿给甲方造成的损失。

四、在贸易合同执行中，如因国外客户或乙方的原因造成合同的变更、解除、终止或违反合同致使变更或终止本协议，甲方不承担责任，因甲方代理行为的过错造成的损失除外。

五、甲方在执行本协议中，对于乙方或第三方的经济、刑事等纠纷，甲方不负连带责任。由此给甲方造成的损失，乙方承担全部责任。

六、如因执行本协议发生纠纷，适用《对外贸易代理制暂行规定》，《对外贸易法》作为本协议的准据法。

七、若甲乙双方发生争执纠纷，应协商解决，协商不成，由甲方所在地法院管辖。

八、本协议正本一式两份，甲乙双方各执一份，副本若干份送甲方据以审批、核算、对外付汇等。

九、本协议自签订之日起生效，有效期为一年，对双方具有同等约束力。

甲方：(公章) 乙方：(公章)

代理人： 代理人：

日期： 日期：

（易货）外贸合同书

合同号：

年 月 日

＿＿＿＿（售方）为一方，与＿＿＿＿（购方）为另一方，签定合同如下：

第一条 合同对象

依据一九＿＿年＿＿月＿＿日双方签定的关于合作的协议，在售方国国境车上

交货条件下售方售出，购方购入货物。其数量、种类、价格及交货期均按第＿＿号

附件办理，该附件为本合同不可分割的部分。

合同总金额为＿＿＿＿。

第二条 价格

本合同所售出货物的价格以瑞士法朗计算，此项价格系卖方国国境车上交货，

包括包皮、包装和标记费在内。

第三条 品质

按本合同所售出货物的品质应符合中华人民共和国国家标准或原苏联国家标准

，并符合本合同附件所规定的技术条件；凭样交货的商品品质应符合双方所确认的

样品。

商品质量应以售方国国家商品检验局出具的品质证明书证明之。

第四条 供货期

售方应在本合同附件规定的期限内发货。在征得购方同意的情况下，售方有权

按双方商妥的数量和金额提前交货。

第五条 标记

每个货箱均应用防水颜料在箱体的三面（上面，前面和左面）用英、俄两种文

字书写以下标记：合同号，收货人，箱号，毛重，净重。

第六条 支付

本合同所供应的货物之价款，由购方按照中国银行和原苏联外经银行关于边境

贸易支付协议书所规定的办法及1990年3月13日“由中国向苏联和由苏联向

中国交货的共同条件”以瑞士法朗凭下列单据向售方支付：

1.帐单4份

2.盖有售方国发站印章的铁路运单副本1份

3.明细单3份

4.品质证明书1份

第七条 保证和索赔

卖方在提供的商品投入使用之后12个月内保证商品质量，但不超过供货之日

起18个月。

对货物品质的异议应在发现缺陷后3个月内提出，如在保证期发现缺陷，提赔

日期不能迟于保证期结束30天。

如商品在保证期内出现缺陷，供货一方应排除缺陷或更换有缺陷的部分并负担

费用。

第八条 发货通知

售方应在发货后10天内以电传向购方通知有关货物自生产厂发运的情况，并

注明发运日期，合同号，发动机号，件数，毛重和铁路运单号。

第九条 仲裁

由本合同所产生或与本合同有关的一切纠纷，应尽可能通过双方谈判解决。如

双方不能达成协议，可提交被告国对外贸易仲裁机关审理，中方国家对外贸易仲裁

为中国对外贸易促进委员会，苏方为原苏联工商会。

第十条 不可抗力条款

双方任何一方发生不可抗力情况（如火灾、自然灾害、战争、各种军事行动、

封锁、禁止进出口或不以双方意志为转移的其它情况），使本合同全部或部分义务

无法履行时，履行本合同义务的期限可相应推迟，在此期间合同义务仍然有效。

如果不可抗力情况持续30天以上，其中一方有权通知另一方免除继续履行合

同义务，此时任何一方无权向对方提出补偿可能的损失。

无法履行本合同义务方应将不可抗力情况发生和结束及影响合同义务履行情况

立即通知对方。

不可抗力发生和持续的时间应以售方或购方有关商会出具的证明书证明。

第十一条 其它条件

本合同未尽事宜，双方均按1990年3月13日“由中国向苏联和由苏联向

中国交货共同条件”办理。

本合同一式两份，以中、俄两种文字书就，两种文字具有同等效力。

第十二条 双方法定地址

售方名称：

地址：

电报挂号：

购方名称：

地址：

电报挂号：

第十三条 运输地址

发货人： 收货人：

发站： 到站：

售方签字： 购方签字：

根据《公司法》及公司《章程》的有关规定，我_______________公司已经_____年_____月_____日召开的股东会决议解散，并成立公司清算组于_____年_____月_____日开始对公司进行清算。现将公司清算情况报告如下。

一、公司登记情况，包括公司名称：______________;公司类型：______________;法定代表人：______________;住所：______________成立时间：______________年_____月_____日;注册资本：______________;股东姓名(名称)_______________;股东出资额：______________;出资比例_______________。

二、公司清算组已于_____年_____月_____日向公司登记机关备案，并取得《备案通知书》(文号_____)

清算组成员由股东_______________、_______________、_______________等人组成，由_______________担任清算组负责人。

三、通知和公告债权人情况。公司清算组于_____年_____月_____日通知公司债权人申报债权，并于_______________在_______________报公告公司债权人申报债权。

四、截止_____年_____月_____日，公司资产总额为_______________元，其中，净资产为_______________元，负债总额为_______________元。附《资产负债表》。

五、公司财产状况。附《财产清单》。《财产清单》内容包括财产的名称、数量、价值等。

六、公司债权债务状况。_______________

七、公司资产总额为_______________元，并按以下顺序进行清偿：_________________

1、清算费用;_______________

2、所欠职工工资、社会保险费用和法定补偿金;_______________

3、税款;_______________

4、债务;_______________

5、剩余财产按股东出资比例分配。________________

截止_____年_____月_____日，公司债权债务已清算完毕，剩余财产已分配完毕，实收资本为零。

清算组成员签字盖章：_________________

_______________公司清算组

经全体股东审查确认，一致通过该清算报告。

___________年_______月_____日

_________国_________市_________外贸公司(下称外贸公司)与中国_________市_________公司(下称公司)签订本合同如下：

1.合同的标的、价格和总价

外贸公司在_________中国界车上交货条件下按本合同附件1向公司提供商品。商品以美元计价，系_________中国界车上交货价，包括包皮、包装和标记的费用。

根据附件1由_________国向中国供货的总值为_________美元。

公司相应地在中国_________国界车上交货条件下按本合同附件2向外贸公司提供商品。商品以美元计价，系中_________国界车上交货价，包括包皮、包装和标记的费用。

根据附件2由中国向_________国供货的总值为_________美元。

2.供货期

售方应在本合同附件规定的期限内交货。售方有权按双方商定的数量和金额提前供货。购方有义务按合同规定接收货物。

3.结算

本合同所供货物之价款，在易货基础以上美元计价，不通过银行记帐。货物交接后，由售方商务代表到购方结算，或将结算凭证寄给购方进行结算，并凭下列单据办理：

(1)发货帐单2份;

(2)盖有发货站戳记的铁路运单副本1份

(3)明细单2份

(4)品质证明书1份

购方接到上述单据核对无误后给售方出以等值易货贸易结算凭证予以确认。

4.包装

卖方应在包装货物时采取所有预防措施以保证货物在储存、海运、陆运、吊装时完好无损。

5.商品的品质和保证

所供商品的品质应由品质证明书加以确认，该证书确认商品品质符合生产国的技术条件和国家标准。

所供商品的品质性能应与标准样品相一致，标准样品在签订合同时交给买方，在保证期内留存买方并在对供货品质发生争议的情况下供双方使用。

保证期为供货后_________个月。

6.索赔

购方可按_________所规定的期限和程度在下列方面提出索赔。

(1)货物的数量

如货物数量与明细单注明的数量不符，在包装完整和没有外部损伤(内部短缺)的情况下，购方有权凭检验证书提出索赔。

如果货物的发运系按发货人确定的重量发出，而国境交接站双方铁路交接中发现不足，并从实际情况看来，不是铁路方面的过失。可根据双方铁路方面编制的商务记录提出索赔。

(2)货物的质量

如货物品质与合同规定不符时，可根据商品检证或无利害关系的权威机关的代表参与制成的记录提出异议。

如售方所供货物的品质，不符合合同规定的技术条件或与双方确认的样品不符时，购方有权要求售方或者削价、或者更换货物。如果售方自收到异议之日起_________天内不作最后决定，或不同意检验证书中确定的削价百分之比时，则购方有权将品质不合格的货物按售方提供的地址退给售方。售方应在本合同规定的异议审理期限内将返回地址通知购方。

如果在每批货物中发现残次品占_________%以上，收货人则将退回全部货物。由于质量原因退回货物时所产生的全部费用由售方承担。

在这种情况下，售方没有免除向购方补发数量相同并符合合同规定的货物的责任。

在终点检验货物的数量和/或质量所需要的一切费用由购方承担。

7.不可抗力条款

由于发生不可抗力情况(如：火灾、水灾、地震等)，而直接影响本合同的履行时，售方对本合同的部分义务或全部义务无法履行的责任不予承担。经双方协商，履行本合同义务的期限也可相应推迟。发生不可抗力情况一方应自灾情结束之日起，_________日内将有关发生不可抗力情况的性质、毁坏程度及影响合同履行的情况书面通知对方。如对方有异议，发生不可抗力情况一方凭其国家有关机关的认证书豁免责任，中方为_________，_________方为_________国工商会。

8.仲裁

由本合同所产生或与本合同有关的一切纠纷，应尽可能通过双方谈判解决。如双方不能达成协议，可通过被告国对外贸易仲裁机关审理。

9.其他条件

本合同未尽事宜，均按_________办理。

对合同的一切修改与补充意见只有以书面形式形成并经双方鉴定后才生效。经双方确认的往来信函、传真、电子邮件等，将作为本合同的组成部分，具有合同的效力。

本合同一式两份，以中、_________两种文字书就，两种文字具有同等效力。

10.双方法定地址：

售方：_________

地址：_________

电传：_________

传真：_________

电话：_________

国际电报：_________

购方：_________

地址：_________

电传：_________

传真：_________

电话：_________

国际电报：_________

10.运输地址

发货人：_________

发站：_________

收货人：_________

到站：_________

售方(盖章)：_________ 购方(盖章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

签订地点：_________ 签订地点：_________

供方：__________

需方：__________

经供需双方协商一致，签订电梯货物购销合同书，共同遵守下列条款：__________

1、 产品名称、规格、数量、 单位、价格(含税价)、供货时间：

2、 质量标准：__________符合下列标准：

GB7588《电梯制造与安装安全规范》

GB/T10058《电梯技术条件》

GB/T10059《电梯试验方法》

GB/T7025《电梯主要参数及轿厢、井道、机房的型式与尺寸》等。

3、 交货时间：____________________

4、 交(提)货地点运输方式及费用负担：需方到供方生产场地自提。费用需方自付。

5、 包装标准：木箱包装，打印装箱清单。

6、 安装标准及责任：

(1)需方按设计的井道图安装，安装必须达到国家标准。

(2)供方提供轿厢拼装图，并作为合同附件。

(3)如不按标准和井道图安装，出现的问题将由需方自行解决。

(4)供方提供调试，并承担相应费用。

7、 结算方式：

(1) 合同签订后三日内，需方付合同总金额的__________%作定金，计__________元， 供方收到款后安排生产。

(2) 合同总金额余款的__________%货款计__________元，需方付款提货。

(3) 安装调试完毕，业主验收合格后一周内付__________%货款计RMB计__________元。

8、 违约责任：__________除不可抗拒的原因之外,供方未按本合同预约日期到货,应向需方支付逾期到货的违约金,每日按货款总金额的百分之五计算违约金。合同在履行中发生争议时双方应通过友好协商解决,协商不成,可在双方各自所地法院提起诉讼.

9、 本合同一式二份,供方持一份,需方持一份,自双方签订之时起生效.本合同如有修改,需经双方在更改处签字并盖章确认.

10、 本货物质量保证期二年，虽无保修金，但属于货物质量问题，供方负责保修。

供方：____________________ 需方：____________________

单位地址：__________ 单位地址：__________

委托代理人：__________ 委托代理人：__________

电话号码：__________ 电话号码：__________

签约日期：___________ 签约日期：_____________

货物进口合同(样式二)

合同编号：＿＿＿＿＿

甲方：＿＿＿＿＿公司（以下简称供方），由＿＿＿＿＿代表。

乙方：＿＿＿＿＿公司（以下简称购方），由＿＿＿＿＿代表。

目录

第一条 合同标的

第二条 技术资料

第三条 供货条件－－包装和标记

第四条 设备质量

第五条 合同价格和支付条件

第六条 保证

第七条 不可抗力

第八条 仲裁

第九条 通知

第十条 语言

第十一条 其他条件

附件1

设备技术说明书

甲方＿＿＿（供方）与乙方＿＿＿＿（购方）达成如下协议：

第一条 合同标的

供方同意出售，购方同意购买＿＿＿＿。（详见本合同附件1，该附件为本合同不可分割的一部分）。

第二条 技术资料

供方应向购方提供设备使用及维修技术资料一份，购方负有对该技术资料保密之义务。

第三条 供货条件－－包装和标记

供方应在设备全额信用证开立之后的＿＿个月内用密封集装箱或其他包皮包装从＿＿＿＿发运设备。

供方有权从任何对其方便的港口发运设备。

供方应把设备运至商定的独联体东海岸＿＿＿港。

自设备从船舷运抵独联体远东港口时起灭失和（或）损坏的风险由供方转移到购方。

供方承担设备运输的一切费用及运抵港口前的保险费。

设备从独联体港口继续运到安装地的一切费用由购方承担。

发货前＿＿天内供方应向购方通知发运情况，明确交通工具的种类和名称、计划发运日期及其他有关信息。

购方应支付履行海关手续的所有费用和一切与设备运入独联体境内有关的开支。

设备和技术资料用密封集装箱或其他包皮装运并附具包装清单，标记使用英语刷写。

发货单证包：

（1）发货帐单（三份）

（2）海运提单

（3）装箱单

（4）保险单

第四条 设备质量

按本合同所供设备的质量应符合生产厂家的技术条件。如生产厂家有保证书，应用保证书加以确认。

第五条 合同价格和支付条件

所供设备的总额为＿＿＿美元（cif价）。购方应在合同签订后的＿＿天内开立以供方为受益人的不可撤销的保兑信用证。该信用证在开立时起的＿＿天内有效。

开证行应为独联体外经银行或日本、南韩、西欧、美国、加拿大的某家银行。

一切与在开证行开立信用证有关的费用由购方承担，而一切与议付行收取信用证有关的费用由供方承担。

支付在向议付行提交下列单据后进行：

（1）发货帐单（3份）

（2）海运提单

（3）装箱单

（4）保险单

第六条 保证

供方保证所供设备在投入使用日起的＿＿个月内，但不超过发货日起的＿＿月内正常工作。

第七条 不可抗力

在发生不可抗力情况致使合同一方不能全部或部分履行本合同的义务时，按此种不可抗力情况存在的时间推迟履行合同义务。

不可抗力情况是指双方不能预见或预测的由于非常事件而出现的情况，即：影响履行所承担义务的火灾、风暴、地震和其他自然现象，以及战争、任何性质的军事行动，各国政府的封锁与制裁等。

因不可抗力情况而不能履行义务的一方，应在不可抗力情况发生和停止的20天内书面通知另一方关于其发生和停止的情况。收信人所在国邮局在收到通知函日加盖的日期作为得悉该信息的日期。

共2页，当前第1页12

货物出口委托合同 合同编号：_________ 甲方：_____________

乙方：_____________

鉴于甲方作为具有对外贸易经营权的专业外贸公司，在相应领域内拥有良好的资信;

鉴于乙方已获得国家有关法律、法规规定的、出口本合同项下货物所需的批准;

鉴于乙方作为委托人，愿意委托甲方为其出口本合同项下货物;

鉴于甲方作为受托人，将以自己的名义对外签订_________号货物出口合同(以下简称“出口合同”);

为明确委托人和受托人之间的权利义务关系，甲乙双方经友好协商，特此订立如下合同，以期共同遵守执行：

第一条 委托出口货物(以下简称“货物”)

货物名称、规格、包装及质量

数量

单价

总价

交货期

(注明贸易术语)

第二条 甲方的义务和责任(根据贸易术语项下卖方义务调整)

1.与货物出口合同的买方(以下简称“外商”)签订出口合同。

2.在签订出口合同后，负责向外商催开出口合同项下的信用证。

3.在收到外商的承运货物的船舶动态后，及时将有关情况通知乙方。

第三条 乙方的义务和责任

1.按照本合同的规定支付委托手续费及其他费用。

2.按照出口合同的规定办理货物商检，并提供商检报告。

3.在出口合同规定的交货期内，将货物运至交货地点并交给外商指定的承运人。

4.备齐货物出口所需的文件、许可证。

5.负责赔偿甲方履行本合同时因不可归责于其自身的原因受到的损失。

第四条 费用及支付

1.委托手续费：_________。

2.其他费用：(根据实际情况调整)货物的出口过程中产生的所有费税均由乙方承担。此等费税包括但不限于关税、增值税、报关费、保险费、码头杂费、仓储费、开证费、商检费、短驳运输费、内陆运输费等。若由甲方代垫，则乙方依甲方提供的有效凭证进行结算。

3.费用支付：乙方应当在_________内，将本条第1款、第2款规定的委托手续费及其他费用汇至甲方指定的账户。

第五条 与出口合同有关的违约、索赔

1.外商违约：当外商未能履行其相应义务时，甲方应及时将上述情况通知乙方，并向乙方披露该外商，乙方可以行使甲方对外商的权利并对其提出索赔，甲方应当向乙方提供必要之协助;如乙方委托甲方索赔的，应当在有效索赔期限内提交必要的索赔证件;如乙方委托并提供相应仲裁或诉讼费用的，甲方应依出口合同之规定对外提起仲裁或诉讼。上述索赔或仲裁、诉讼产生之利益或损失，由乙方享有或承担。

2.如乙方违约致使甲方未能对外商履行义务的，甲方有权向外商披露乙方;如甲方因此对外商或承运人承担违约责任或受到其他损失，乙方应负责赔偿。

第六条 违约责任

本合同任何一方不履行本合同义务或履行合同义务不符合约定的，应当赔偿对方因此而受到的损失;但甲方因外商或承运人违约而不能按照本合同的规定履行其义务的不属违约，甲方不承担违约责任，且乙方应当自行承担其因此而受到的损失。

第七条 不可抗力

甲、乙任何一方由于不可抗力不能履行合同时，应在不可抗力解除后3日内向对方通报不能履行的理由，在提供政府主管部门出具的不可抗力证明后，根据情况可延期、部分或全部不履行合同，同时部分或全部免于承担违约责任;但如果甲方未能因不可抗力免除对外商的责任时，乙方应赔偿甲方因此而受到的损失。

第八条 适用法律及争议解决

1.本合同未尽事宜，依照《中华人民共和国民法典》的相关规定处理。

2.与本合同有关的任何争议，均由双方协商解决，协商不成，应提交甲方所在地人民法院诉讼解决。

第九条 合同生效及其他

1.本合同经甲、乙双方授权的代表签字、加盖公章后生效。

2.本合同一式两份，甲乙双方各执一份。

甲方(盖章)：_____________ 乙方(盖章)：_____________

授权代表(签字)：_________ 授权代表(签字)：_________

_________年____月____日 _________年____月____日

合同编号：

甲方(托运人)：

乙方(承运人)：

甲方委托乙方运输货物，双方达成以下条款：

第一条 本合同与今后每次运输交易的关系事项

一、 本合同签订后，与今后具体发生的每次交易中的托运书、货运单、提货单、各种签收单证及函件等，共同规范甲乙双方的运输交易行为。

二、每次交易中的货物、包装、装车起运地、目的地、到货期限、收货人、运输方式、运输工具、运输路线、运输价格、送货费用和保价运输等，在每次交易中商定且体现在托运单据及资料中。

三、运输价格以乙方对外统一公布的价目表及其变动表为基础，由甲乙双方发生交易时商定，并以甲乙双方代表签名或盖备案章的托运单或货运单等资料为准。

第二条 托运事项

一、乙方可在甲方指定的地点装运货物。乙方在甲方工厂装运时，服从甲方厂区内的统一管理(但不接受甲方按自已的制度进行的处罚)。甲方有权对乙方代表或工作人员的工作提出改进意见或合理地要求更换代表及工作人员。

二、甲方应将托运货物的品名、性质、重量、包装、瑕疵(含夹带禁运品、危险品的)等真实情况如实告知乙方，并根据运输需要，提供相关政府部门的证明文件、装运单据等。否则，乙方知道后将拒绝承运;因未拆包装等原因而未发现的，可以在发现时任意处置并及时通知甲方，且要求甲方承担该票(次)货值10% —50%的违约金，乙方因此受损超过违约金的部分也由甲方承担。

三、货物包装应符合安全运输要求，否则乙方可拒绝运输并由甲方承担可能由此产生的损失。乙方不得擅自改动甲方包装，甲方对自己的包装承担责任。甲方委托乙方包装的，应支付包装物料及人工费，包装责任由乙方承担;但如甲方要求乙方降低包装标准而导致的责任由甲方承担。

四、甲方对运输业利润的低利率与高风险等特点，及相关法律对承运人责任限制及免责条款有足够的了解。为化解风险，应向乙方申请办理保价运输。航空、汽运的保价费均为货值的0.3%。

五、实行保价运输后，当乙方得知发生了保价责任范围内的事故后，乙方应在3小时内通知甲方，甲方应根据乙方要求的期限向乙方提交相关的证据资料，协助乙方办理赔偿事宜。

六、甲方在办理托运手续时，如不如约申办保价运输并交纳保价费给乙方的，一旦发生包括已报案的盗、抢、骗而致货物毁损、灭失在内的非不可抗力事故的，如乙方应承担责任时，空运按货物损失部分20元/公斤，汽运按货物损失部分运费的2至4倍赔偿给甲方。

第三条 运输事项

一、乙方具有法律规定的承运资质，否则，由此导致甲方货损和延时交货的，承担赔偿责任。

二、甲方有权了解货物的在途、到达及提货情况。可能延时或货损时，乙方应主动通知。

三、乙方应在每次具体交易中约定的到货期限到达目的地并将货物交给甲方在托运凭证上指定的合格收货人。无故延期的，甲方可以按每延期一日，少付10%的运费给乙方，但最多少付本票(次)运费。若运输途中，遇到恶劣天气，交警、运政等相关部门多次长时间检查车辆，修路，全国性节假日，突发性机械大故障,交通事故以及不可抗力因素而导致延期的，乙方首先应及时通知甲方，然后尽快缩短延误的时间。但以上情况不是乙方人为过错，因而不承担延期责任。收货人延时收货或不收货的，乙方不承担延时责任。

四、乙方应将托运货物安全运至目的地并交给合格收货人，否则，造成甲方货损的，按第二条

第五款、第六款赔偿。但若收货人得到乙方通知后五日内不提货的，乙方不承担未及时、安全交货所造成的各项损失。

五、乙方接受甲方变更运输目的地和收货人的合理的且乙方能够接受的书面申请(不接受口头申请)，除非乙方因运输工具、运输路线、运输时间等方面不能满足甲方的变更要求。但因变更增加的运杂费，甲方应在变更申请书中承诺支付并办理相关手续，否则，乙方不接受变更申请。

六、因乙方原因误达目的地或误交不合格收货人的，由乙方自行纠正并承担增加的运杂费。造成延时交货或货物损失的，由乙方按本合同的相关条款予以赔偿。

七、发生应由乙方负责赔偿的事件时，乙方应按本合同的约定或双方商定的方案对甲方进行赔偿，但甲方不得以此延期或拒绝支付已到付款期的运杂费给乙方。

第四条 目的地收货人签收货物等事项

一、收货人得到通知后超过五日不领取货物时，乙方应及时通知甲方并收取相应保管费。收货人、托运人超过十五日不领取货物的，乙方有权处置货物(包括丢弃、变卖。变卖后，扣除变卖费用及本次或累计所欠运杂费后的多余部分，返还给甲方)。甲方在十五日内弃货的，应向乙方提交书面弃货通知。无论甲方主动弃货还是乙方处置货物，甲方均应如约支付运杂费。当约定收货人支付运杂费(即运杂费到付)，但收货人却不予支付或不提货时，运杂费应由甲方支付给乙方。

二、甲方指定的收货单位提货代表不持委托书、身份证或持不合格的委托书、身份证要求提货的，乙方有权拒绝且不承担相关责任。甲方有义务要求收货人提供合格的委托书和身份证等资料。

三、由于货物的性质和长途运输的振动、装卸，甲方允许乙方交货时的货损、货差率为 %。

四、甲方以要求乙方返回甲方的销售送货单、收货人签收的提单或其它收货凭证作为支付运杂费条件的，乙方只要能提交以上足以证明甲方指定的收货人已经收货的任意一种资料的，甲方就应

当支付全部运杂费给乙方。

五、乙方应保守甲方的商业秘密，不得向甲方业务人员行贿，否则，甲方有权解除合同。但此举不影响支付已经发生的全部运杂费。甲方也不得把乙方给予的优惠运价向第三方透露。

第五条 运杂费的支付事项

一、上一自然月的运杂费，在本月5日前，由甲乙双方对帐确认(如果双方通过传真及其它简易方式不能确认对帐数目,或虽已确认但甲方不按时付款的，则甲方代表应在对帐单或帐款确认函上签名或盖财务专用章等工商备案章)。双方确认后，乙方向甲方开具运输业统一发票(甲方不要求开票的除外。但开票之前，甲方已收上次发票而未付款的，则应支付上次发票款后再要求乙方开票)。甲方代表应在发票签收单上签名或盖备案章，并于收到发票后 日内(最迟不得超过本月 号)支付现金、交付支票(出票日期不得超过此日期)或通过银行办理支付手续。因甲方也有载明运杂费的凭证联，通过统计后再与乙方核实，应明知付款数额，应主动对帐并按期付款。

二、当一个自然月内运费每当达到 万元时，甲方不按上款时间和方式付款，而应在每当达到此数额之日起三日内付清此数额的运杂费。该月余下不足 万元(与上行空格内的数额相同)的部分，按上一款对帐后下月支付。本款对帐、开票程序以及付款方式按上一款。

三、当一个自然月的全部运杂费不足 万元时，则于该月的下一个月3号前付清该月全部款项。从下一月起，改按每7天口头或书面对帐，并于7天满期之日起两日内付清。开票程序以及付款方式按上一款。

四、甲方不按时确认乙方的对帐数额，则乙方可按托运书、货运单、提单以及收货人各种签收凭证等能够证明运杂费数额的资料，向甲方收取运杂费。

五、甲方收到乙方发票后，如果乙方主张并未实际收到甲方的付款，则甲方应提供乙方开具的收款收据或银行出具的付款凭证，来证明已实际支付了发票上的金额给乙方。

六、如果乙方收款代表上门收取甲方运杂费时，每次均须持三日内有效的收款委托书原件(或公函原件)，否则，甲方应拒绝支付。超过壹仟元的，甲方不得向乙方收款代表支付现金。甲方违反本款约定，乙方无须举证证明自已未实际收到付款，则可主张甲方没有对乙方履行付款义务。

七、甲方延期付款，应支付每日延期额的0.5%的违约金给乙方。

第六条 本合同的履行期限及解除情形

一、本合同为长期合同，对签订本合同之日起发生的运输交易均有效。

二、发生下列情况时，双方均可解除本合同(但已经发生的交易应受本合同调整)：

1、根本性违约。如乙方未及时、安全地履行运输义务，未将货物如约交给合格的收货人或拒绝履行双方约定的赔偿义务和商定的赔付数额;甲方未如期如量支付约定的运杂费。

2、在实际合作中，由于运输价格、运力、到货期限、运输线路、保价运输、待运货物的性质是否适应运输等无法达成一致的。

三、解除合同应提前10天书面通知对方，但下列情况例外：

1、双方届时同意立即解除的。

2、甲方要求乙方赔偿损失且在10天内达不成协议的。

3、甲方拖延、拒绝对帐或拖延、拒绝支付运杂费达到10天的。

四、解除合同时，未到付款期的运杂费视为已到期。乙方提出解约的，解约之日起15日内支付;甲方提出解约的，解约之日起三日内支付。

第七条 附则

一、签定本合同时，甲乙双方应提交已盖公章的业务代表的授权委托书、身份证复印件、双方营业执照副本复印件和组织机构代码证复印件给对方。

二、受托人作为业务代表，任何一人均有权在托运书、货运单、出仓单、对帐单、帐款确认函、发票签收单、各种来往文件、函件上签名(但乙方的收款代表，在实际收款时由乙方临时书面委托;甲方代表需分工的，应在委托书中表明)。变更代表应向对方及时提交书面变更通知，或重新递交委托书。姓名须打印在委托书上。如果手写，则须在姓名上盖章，否则不对姓名真实性提出异议。

三、本合同的所有空格，在提交各方审批前均需打印填好。任何手写改动的文字(不论文字上是否盖章)均无效。确需改动的，应另签补充协议或重签合同。

四、本合同之争议，由乙方住所地法院管辖。

五、本合同正文一式两份，每份共四页,甲乙双方各执一份。

第八条 其它约定 (此条非必备。增加内容必须打印，不增加的删掉此条，不留空白，否则，此条不产生效力)。

甲方： 乙方：

(盖章) (盖章)：

法定代表人： 法定代表人：

授权签名人： 授权签名人：

电话： 电话：

传真： 传真：

地址： 地址：

签约日期： 年 月 日

甲方：_____________________

乙方：_____________________

甲方聘用乙方成为______________有限公司的正式人员，就聘用事宜，双方达成如下协议：

1.双方本着真诚合作，共谋发展的原则，友好协商共同订立本协议。

2.乙方须为具备法定年龄，年满18周岁系法律允许从事销售工作的合法公民，如境外人员必须持有合法有效的身份证件。

3.乙方须提供准确的个人资料，如实认真填写甲方的会员申请表，并办理甲方相关手续，经甲方核实无误后方可成为甲方业务人员，取得会员卡一张，并获得销售奖励编码。

4.乙方须详细阅读本协议并了解甲方的一切相关规定，对甲方的经营理念须有较高的认知度及忠诚度，并自愿维护和遵守甲方的一切规章制度。

5.甲方按乙方销售业绩的大小给予不同的奖励，详见《会员市场消费计划书》，并按其规定发放奖金，甲方不承担乙方其它任何费用。

6.如乙方直接开拓甲方区域管理中心或服务站，甲方均给予乙方一次性奖励，按各联盟店在公司首次进货值给予______________的奖励，个人所得税由乙方自行负责。

7.为便于乙方拓展市场，甲方须向乙方提供有效的证件及公司宣传资料、公司系列化产品的详细说明书，并配合乙方作好销售服务工作。

8.乙方可享用甲方提供的各种促销方案、促销品、招商政策及各项奖励政策，并接受甲方专业化市场培训，营销心态、技巧、理念等课程培训。

9.乙方有责任为甲方收集并分析当地的市场信息，并及时准确的提供给甲方。

10.甲、乙双方必须遵守国家劳动部门及法律的相关规定，不能作违法乱纪的行为，并严格执行甲方的市场保护政策，严禁恶意降价、抬价、扰乱市场，否则甲方将取消乙方资格。

11.如乙方个人资料有任何更改，应及时通知甲方，否则由此而造成的乙方业绩收入减少或未能取到奖金等损失均由乙方自行承担，与甲方无关。

12.如因不可抗拒力、不可预测因素造成公司不能正常运作时，甲方当尽力补救，但不承担任何责任。

13.以上条款如有未尽事宜，双方可协商而定。

14.本协议有效期为一年，期满后可续签。

15.本协议一式叁份，甲方、乙方及当地联盟店各执一份，自签字后生效，并具有同等法律效力。

甲方：__________________________

日期：__________________________

乙方：______________________

日期：__________________________

甲方：

乙方：

经双方友好协商，本着互惠互利、共同发展的原则，现达成以下协议：

一、 甲方将车号浙A___号(专用于危险货物：___的运输)的危险品营运车辆承包给乙方经营。

二、 承包期限及承包费：甲方将具有新购车辆的至少51%(20xx年6月30日之前购置的车辆，至少为15%的股权)的股权车辆承包给乙方使用，出资___万元，承包期暂定为___年，即自20 年 月 日起直至报废止。承包费为 元/月。

三、 费用缴纳：各项费用一月一结，乙方必须在次月15日之前将当月各项费用向甲方全部缴清，各项费用主要包括：当月承包费以及当月发生的由甲方替乙方代缴的其它费用，如保险费、培训费、罐体检测费等。未经甲方书面同意乙方无故拖欠应缴费用的，甲方有权向乙方收取5元/辆/天的滞纳金，直至乙方付清之日为止。

四、 第三者强制责任险由甲方按行政主管部门要求统一代为办理，其余险种乙方不经甲方书面同意自行投保的，一旦出险，甲方将向乙方追诉由此产生的一切经济损失、赔偿责任。

五、 甲方承包给乙方的车辆，保证手续办理齐全，各项证件合法有效。车辆业务在行政许可的范围内由乙方允许自主经营。如甲方提供

六、 乙方应服从甲方管理，合法经营。若乙方违法经营或违法行为所产生的一切后果由乙方全部承担，包括对甲方的连带处罚给甲方造成的一切损失，也由乙方全部承担。

七、 未尽事宜通过双方协商或法律途径解决。

八、 如任何一方起诉，在甲方所在地的法院起诉。

九、 本协议自签字之日起生效，双方应自觉遵守协议各项条款。

十、 本协议一式二份，双方各执一份。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

签订日期：_________

签订地点：_________

卖方：_________

买方：_________

经买双方确认根据下列条款订立本合同：

1、允许溢短_________%

2、成交价格术语：_________

3、包装：_________

4、装运唛头：_________

5、运输起讫：由_________经_________到

6、转运：允许 不允许;

分批装运：允许不允许

7、装运期：_________

8、保险：由_________按发票金额110%投保_________险，另加保_________险至_________为止。

9、付款条件：

买方不迟于_________年_________月_________日前将100%的货款用即期汇票/电汇送抵卖方。

买方须于_________年_________月_________日前通过_________银行开出以卖方为受益人的不可撤销_________天期信用证，并注明在上述装运日期后_________天在中国议讨有效，信用证须注明合同编号。

付款交单：买方应对卖方开具的以买方为付款人的见票后_________天付款跟单汇票，付款时交单。

承兑交单：买方应对卖方开具的以买方为付款人的见票后_________天承兑跟单汇票，承兑时交单。

10、单据：卖给方应将下列单据提交银行议付/托收。

整套正本清洁提单。

商业发票一式_________份。

装箱单或重量单一式_________份。

由_________签发的质量与数量证明书一式_________份。

保险单一式_________份。

由_________签发的产地证一式_________份。

11、装运通知：装运完毕，卖方应即电告买方合同号、品名、已装载数量，发票总金额，毛重，运输工具名称及启运日期等。

12、检验与索赔：

卖方在发货前由_________检验机构对货物的品质、规格和数量进行检验，并出具检验证明书。

货物到达目的的口岸后，买方可委托当地的商品检验机构对货物进行复检。

如果发现货物有损坏、残缺或规格、数量与合同规定不符，买方须于货到目的口岸的_________天内凭_________检验机构出具的检验证明书向卖方索赔。

如买方提供索赔，凡属品质异议须于货到目的的口岸之日起_________天提出;

凡属数量异议须于货到目的口岸之日起_________天提出。

对所装货物所提任何异议应由保险公司、运输公司或邮递机构负责的，卖方不负任何责任。

13、人力不可抗拒：如因人力不可抗拒的原因造成本合同全部或部分不能履约，卖方概不负责，但卖方应将上述发生的情况及时通知买方。

14、争议之解决方式：任何因本合同而发生或与本合同有关的争议，应提交中国国际经济贸易仲裁委员会，按该会的仲裁规则进行仲裁。

仲裁地点在中国深圳。

仲裁裁决是终局的，对双方均有约束力。

15、法律适用：本合同之签订地、或发生争议时货物所在地在中华人民共和国境内或被诉人为中国法人的，适用中华人民共和国法律，除此规定外，适用《联合国国际货物销售公约》。

16、文字：本合同中、英两种文字具有同等法律效力，在文字解释上，若有异议，以中文解释为准。

17、附加条款：_________

18、本合同共_________份，自双方代表签字之日起生效。

卖方：_________买方：_________

代表人：_________ 代表人：_________

附件： ：_________ ：_________ ：_________ ：_________ ：

委托方(以下简称甲方)：_________________

承运方(以下简称乙方)：_________________

甲、乙双方经过协商，根据合同法有关规定，订立货物运输合同，条款如下：

一、合同期为一年，从_______年______月_____日起到_______年______月_____日为止。

二、上述合同期内，甲方委托乙方运输货物，运输方式为汽车公路运输，具体货物的名称、规格、型号、数量、价值、运费、到货地点、收货人、运输期限等事项，由甲、乙双方另签运单确定，所签运单作为本合同的附件与本合同具有同等的法律效力。

三、甲方的义务：

1、按照国家规定的标准对货物进行包装，没有统一规定包装标准的，应根据保证货物运输的原则进行包装，甲方货物包装不符合上述要求，乙方应向甲方提出，甲方不予更正的，乙方可拒绝起运。

2、按照双方约定的标准和时间向乙方支付运费。

四、乙方的义务：

1、按照运单的要求，在规定的期限内，将货物运到甲方指定的地点，交给甲方指定的收货人。

2、承运的货物要负责安全，保证货物无短缺、无损坏，如出现此类问题，应承担赔偿义务。

五。运输费用及结算方式：

1、运费按乙方实际承运货物的里程及重量计算，具体标准按照运单约定执行。

2、乙方在将货物交给收货人时，应向其索要收货凭证，作为完成运输义务的证明，持收货凭证与甲方结算。

3、甲方对乙方所提交的收货凭证进行审核，在确认该凭证真实有效且货物按期运达无缺失损坏问题后_____日内付清当次运费。

六、甲方交付乙方承运的货物均系供应客户的重大生产资料，乙方对此应予以高度重视，确保货物按期运达。非因自然灾害等不可抗力造成货物逾期运达的，如客户追究甲方责任，乙方应全额赔偿甲方的经济损失。因发生自然灾害等不可抗力造成货物无法按期运达目的地时，乙方应将情况及时通知甲方并取得相关证明，以便甲方与客户协调。

七、运输过程中如发生货物灭失、短少、损坏、变质、污染等问题，乙方应按照以下标准赔偿甲方的经济损失。

1、货物灭失或无法正常使用的，按运单记载货物价格全额赔偿，如运单未记载价格的，按甲方同类产品出厂价格赔偿。

2、货物修理后可以正常使用且客户无异议的，赔偿修理费(包括换件费用、人工费及修理人员的往返差旅费等)。

八、出现合同第七条情况导致货物逾期运达的，乙方除按该条规定承担责任外，还应当同时执行本合同第六条的规定。

九、本合同未尽事宜，由双方协商解决，协商不成，按照合同法规定办理，发生争议提交______仲裁委员会按其仲裁规则进行仲裁。

十、本合同一式_____份，双方各持_____份，双方签字盖章后生效。

甲方：(签字)_________________ 乙方：(签字)_________________

联系电话：_________________ 联系电话：_________________

_________年_____月_____日 _________年_____月_____日

外贸合同中英文

编号： no：

日期： date ：

签约地点： signed at：

卖方：sellers：

地址：address： 邮政编码：postal code：

电话：tel： 传真：fax：

买方：buyers：

地址：address： 邮政编码：postal code：

电话：tel： 传真：fax：

买卖双方同意按下列条款由卖方出售，买方购进下列货物：

the sellers agrees to sell a nd the buyer agrees to buy the undermentioned goods on the terms a nd conditions stated below.

1 货号 article no.

2 品名及规格 description&specification

3 数量 quantity

4 单价 unit price

5 总值：

数量及总值均有_____%的增减,由卖方决定。

total amount

with _____% more o r less both in amount a nd quantity allowed at the sellers option.

6 生产国和制造厂家 country of origin a nd manufacturer

7 包装： packing：

8 唛头： shipping marks：

9 装运期限：time of shipment：

10 装运口岸：port of loading：

11 目的口岸：port of destination：

12 保险：由卖方按发票全额110%投保至_____为止的_____险。

insurance：to be effected by buyers for 110% of full invoice value covering _____ up to _____ only.

13 付款条件：

买方须于_____年_____月_____日将保兑的，不可撤销的，可转让可分割的即期信用证开到卖方。 信用证议付有效期延至上列装运期后15天在中国到期，该信用证中必须注明允许分运及转运。

payment：

by confirmed, irrevocable, transferable a nd divisible l/c to be available by sight draft to reach the sellers before ___/___/_____ a nd to remain valid for ingotiation in china until 15 days after the aforesaid time of shipment. tje l/c must specify that transhipment a nd partial shipments are allowed.

14 单据：documents：

15 装运条件：terms of shipment：

16 品质与数量、重量的异义与索赔：quality/quantity discrepancy a nd claim：

17 人力不可抗拒因素：

由于水灾、火灾、地震、干旱、战争或协议一方无法预见、控制、避免和克服的其他事件导致不能或暂时不能全部或部分履行本协议，该方不负责任。但是，受不可抗力事件影响的一方须尽快将发生的事件通知另一方，并在不可抗力事件发生15天内将有关机构出具的不可抗力事件的证明寄交对方。

force majeure：

either party shall not be held responsible for failure o r delay to perform all o r any part of this agreement due to flood, fire, earthquake, draught, war o r any other events which could not be predicted, controlled, avoided o r overcome by the relative party. however, the party affected by the event of force majeure shall inform the other party of its occurrence in writing as soon as possible a nd thereafter send a certificate of the event issued by the relevant authorities to the other party within 15 days after its occurrence.

18 仲裁：

在履行协议过程中，如产生争议，双方应友好协商解决。若通过友好协商未能达成协议，则提交中国国际贸易促进委员会对外贸易仲裁委员会，根据该会仲裁程序暂行规定进行仲裁。该委员会决定是终局的，对双方均有约束力。仲裁费用，除另有规定外，由败诉一方负担。

共6页，当前第1页123456

进口合同(样式一)

15.8 双方任何一方未能取得另一方事先同意前，不得将本合同项下的任何权利或义务转让给第三者。

15.9 除本合同规定的义务和责任外，双方中的任何一方都不承担任何其他义务和责任。

第十六章 法定地址

买 方：中国技术进出口总公司

地 址：中国北京西郊二里沟

电报挂号：techimport beijing

电传号：22244 tic

传真号：

卖 方：

地 址：

电报挂号：

电传号：

传真号：

买方：＿＿＿＿

（签字）

卖方：＿＿＿＿

（签字）

附件五

卖方技术人员的服务范围和待遇条件

1.卖方技术人员的派遣

为了使合同现场的建设顺利进行，卖方应向买方派遣技术熟练的、身体健康的、称职的技术人员到合同现场进行技术服务。卖方技术人员的专业、职务、人数、在华工作期限详见附表一。

上述卖方技术人员的确切专业、人数、在华工作期限、到达和离开本合同工厂的日期，将根据本合同现场的建设任务的实际进展情况，由买卖双方协商确定。需要调整附表一规定的人/月数时，双方届时另议。

2.卖方技术人员的职责和义务

（1）卖方应从所派遣的技术人员中指定一名为卖方在合同现场的总代表，负责本合同范围内总的技术服务，并与买方合同现场总代表合作协商，解决有关工作和技术问题，但双方总代表未经双方授权无权修改合同。

（2）代表卖方执行本合同规定范围内的施工、安装、调试、投料试车（包括功能试验和考核试验）、生产操作、生产工艺和维修方面的技术服务并应执行合同规定的卖方应承担的职责和义务。

（3）详细讲解技术资料、图纸、工艺流程、设备性能、分析方法以及有关注意事项等，解答并解决买方提出的有关本合同范围内的技术问题。

（4）为确保上述二2条和二3条的正确进行，卖方技术人员应在本合同服务范围内予以全面的、正确的技术服务和必要的示范操作。

（5）协助买方在本合同现场培训安装、调试、生产、设备维修和分析检验人员，提高他们的技术水平。

（6）卖方人员的技术指导应正确无误。如因指导错误所造成“设备”的损失，应由卖方负责更换、修理或补齐，费用均由卖方负担。对于卖方技术人员的技术指导，买方有关人员应予以尊重。

3.卖方技术人员的技术服务费和支付办法

（1）买方应支付给卖方技术人员如下技术服务费（按每人每天计算）：

每人每天 美元

总代理（或主任工程师）

工程师

技术员

操作工

（2）卖方技术人员的技术服务费（每天）自抵达合同工厂现场之日起计算至离开合同工厂现场之日止。

（3）星期天，中华人民共和国的法定节日为卖方技术人员在合同现场的有薪休息日。

（4）对于卖方技术人员未经双方现场总代表同意的缺勤以及经双方总代表同意的事假，买方不支付其技术服务费，但经医生证明的病假除外。如果病假连续超过15天，买方不再支付其技术服务费。

（5）卖方技术人员的技术服务费按月结算，买方收到卖方每月开出的帐单一式四份和双方总代表签署的卖方技术人员记时卡，经审核无误后，于30天内通过中国银行将卖方技术人员的月技术服务费汇到卖方指定的银行帐户上。如卖方开出的帐单有误，买方有权拒付有误的部分，但按时支付无误部分。

共17页，当前第15页1234567891011121314151617

甲方：____________

乙方：____________

根据《中华人民共和国民法典》及其他有关法律法规的规定，甲乙双方在平等、自愿、公平、诚实信用的基础上，就泰纳果品供货的有关事宜达成如下协议。

一、果品名称、数量、规格、价格、包装及供货批量;

见每批果品供货合同清单及发票数量，金额。果品供货合同清单为本合同的组成部分。

二、质量标准：符合国家果品行业相应的标准。

三、履行期限：为______年______月______日至______年______月______日。

四、交货及运输：

五、结算方式：

六、果品验收：

乙方应按照规定提供其注册许可证、每批果品的检验合格证明、发票等，甲方应对每批果品进行验收，并查验品名、数量、规格、价格等与供货合同清单是否相符，对质量有异议的，由双方根据合同商讨鉴定。

七、违约责任：

1.一方迟延交货或迟延支付货款的，应每日按照迟延部分货款 %的标准向对方支付违约金。迟延超过 日的，对方有权解除合同并要求迟延方赔偿损失。

2.因甲方未提供必要的交货验收条件致使乙方无法按时交货的，甲方应赔偿由此

3.乙方交付的果品若存在全部质量问题的，甲方有权拒收，并及时通知乙方，由此产生的损失由乙方承担。

4.若发生特殊情况，致使甲方不再需要乙方送货的，或乙方无足够果品提供给甲方的，均应提前 日告知对方，双方可解除合同;未及时通知的，应赔偿由此给对方造成的损失。

5.一方无正当理由中止履行或单方变更、解除合同的，应赔偿由此给对方造成的损失。

八、不可抗力：因发生自然灾害等不可抗力的，经核实可全部或部分免除责任，但应当及时通知对方，并在合理期限内提供证明。

九、争议解决方式：本合同项下发生的争议，由当事人双方协商或申请调解解决;协商或调解解决不成的由__________________仲裁委员会解决。

十、本合同自双方签字盖章之日起生效。未尽事宜，由双方共同协商签订补充协议。本合同一式______份，甲方______份，乙方______份，均具有同等法律效力。

十一、其他约定：

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

一般货物进口合同格式

合同号码：

签约日期：

买方：

卖方：

本合同由买卖双方缔结，用中、英文字写成，两种文体具有同等效力，按照下述条款，卖方同意售出买方同意购进以下商品：

第一部分

1.商品名称及规格

2.生产国别及制造厂商

3.单价(包装费用包括在内)

4.数量

5.总值

6.包装(适合海洋运输)

7._____(除非另有协议，_____均由买方负责)

8.装船时间

9.装运口岸

10.目的口岸

11.装运唛头，卖方负责在每件货物上用牢固的不褪色的颜料明显地刷印或标明下述唛头，以及目的口岸、件号、毛重和净重、尺码和其它买方要求的标记。如系危险及/或有毒货物，卖方负责保证在每件货物上明显地标明货物的性质说明及习惯上被接受的标记。

13.其它条件：除非经买方同意和接受，本合同其它一切有关事项均按第二部分交货条款之规定办理，该交货条款为本合同不可分的部分，本合同如有任何附加条款将自动地优先执行附加条款，如附加条款与本合同条款有抵触，则以附加条款为准。

第二部分14.fob/fas条件

14.1.本合同项下货物的装运舱位由买方或买方的运输代理人_____租订。

14.2.在fob条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期装上买方所指定的船只。

14.3.在fas条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期交到买方所指定船只的吊杆下。

14.4.货物装运日前10--15天，买方应以电报或电传通知卖方合同号、船只预计到港日期、装运数量及船运代理人的名称。以便卖方经与该船运代理人联合及安排货物的装运。卖方应将联系结果通过电报或电传及时报告买方。如买方因故需要变更船只或者船只比预先通知卖方的日期提前或推迟到达装运港口，买方或其船运代理人应及时通知卖方。卖方亦应与买方的运输代理或买方保持密切联系。

14.5.如买方所订船只到达装运港后，卖方不能在买方所通知的装船时间内将货物装上船只或将货物交到吊杆之下，卖方应负担买方的一切费用和损失，如空舱费、滞期费及由此而引起的及/或遭受的买方的一切损失。

15.c&f条件

15.1.卖方在本合同第8条规定的时间之内应将货物装上由装运港到中国口岸的直达船。未经买方事先许可，不得转船。货物不得由悬挂中国港口当局所不能接受的国家旗帜的船装载。

15.2.卖方所租船只应适航和适货。卖方租船时应慎重和认真地选择承运人及船只。买方不接受非保赔协会成员的船只。

15.3.卖方所租载货船只应在正常合理时间内驶达目的港。不得无故绕行或迟延。

15.4.卖方所租载货船只船龄不得超过15年。对超过15年船龄的船只其超船龄额外_____费应由卖方负担。买方不接受船龄超过二十年的船只。

15.5.一次装运数量超过一千吨的货载或其它少于一千吨但买方指明的货载，卖方应在装船日前至少10天用电传或电报通知买方合同号、商品名称、数量、船名、船龄、船籍、船只主要规范、预计装货日、预计到达目的港时间、船公司名称、电传和电报挂号。

15.6.一次装运一千吨以上货载或其它少于一千吨但买方指明的货载，其船长应在该船抵达目的港前7天和24小时分别用电传或电报通知买方预计抵港时间、合同号、商品名称及数量。

15.7.如果货物由班轮装运，载货船只必须是_____船级社最高船级或船级协会条款规定的相同级别的船级，船只状况应保持至提单有效期终了时止，以装船日为准船龄不得超过20年。超过20年船龄的船只，卖方应负担超船龄外_____费。买方绝不接受超过25年船龄的船只。

15.8.对于散件货，如果卖方未经买方事前同意而装入集装箱，卖方应负责向买方支付赔偿金，由双方在适当时间商定具体金额。

15.9.卖方应和载运货物的船只保持密切联系，并以最快的手段通知买方船只在途中发生的一切事故，如因卖方未及时通知买方而造成买方的一切损失卖方应负责赔偿。

16.cif条件：在cif条件下，除本合同第15条c&f条件适用之外卖方负责货物的_____，但不允许有免赔率。

18.装船单据

18.a.卖方凭下列单据向付款银行议付货款：

18.a.1.填写通知目的口岸的_____运输公司的空白抬头、空白背书的_____已装运洋轮的清洁提单(如系c&f/cif条款则注明“运费已付”，如系fob/fas条款则注明“运费待收”)。

18.a.2.由信用证受益人签名出具的发票5份，注明合同号、信用证号、商品名称、详细规格及装船唛头标记。

18.a.3.两份由信用证受益人出具的装箱单及/或重量单，注明每件货物的毛重和净重及/或尺码。

18.a.4.由制造商及/或装运口岸的合格、_____的公证行签发的品质检验证书及数量或重量证书各两份，必须注明货物的全部规格与信用证规定相符。

18.a.5.本交货条件第17条规定的装船通知电报或电传副本一份。

18.a.7.运货船只的国籍已经买主批准的书信一封。

18.a.8.如系卖方_____需提供投保不少于发票价值110%的一切险和战争险的_____单。

18.b.不接受影印、自动或电脑处理、或复印的任何正本单据，除非这些单据印有清晰的“正本”字样，并经发证单位授权的领导人手签证明。

18.c.联运提单、迟期提单、简式提单不能接受。

18.d.受益人指定的第三者为装船者不能接受，除非该第三者提单由装船者背书转受益人，再由受赠人背书方可接受。

18.e.信用证开立日期之前出具的单据不能接受。

18.f.对于c&f/cif货载，不接受租船提单，除非受益人提供租船合同、船长或大副收据、装船命令、货物配载图及或买方在信用证内所要求提供的其它单据副本各一份。

18.g.卖方须将提单、发票及装箱单各两份副本随船带交目的口岸的买方收货代理人_____。

18.h.载运货船启碇后，卖方须立即航空邮寄_____单据副本一份给买方，三份给目的口岸的对外贸易运输公司分公司。

18.j.中华人民共和国境外的银行费用由卖方负担。

19.合同所订货物如用空运，则本合同有关海运的一切条款均按空运条款执行。

20.危险品说明书凡属危险品及/或有毒，卖方必须提供其危险或有毒性能、运输、仓储和装卸注意事项以及防治、急救、消防方法的说明书，卖方应将此项说明书各三份随同其他装船单据航空邮寄给买方及目的口岸的_____运输公司。

22.赔偿费因“人力不可抗拒”而推迟或不能交货者除外，如果卖方不能交货或不能按合同规定的条件交货，卖方应负责向买方赔偿由此而引起的一切损失和遭受的损害，包括买价及/或买价的差价、空舱费、滞期费，以及由此而引起的直接或间接损失。买方有权撤销全部或部分合同，但并不妨碍买方向卖方提出索赔的权利。

24._____双方同意对一切因执行和解释本合同条款所发生的争议，努力通过友好协商解决。在争议发生之日起一个合理的时间内，最多不超过90天，协商不能取得对买卖双方都满意的结果时，如买方决定不向他认为合适的有管辖权的法院提出诉讼，则该争议应提交_____。除双方另有协议，_____应在中国北京举行，并按中国国际贸易促进委员会对外贸易_____委员会所制订的_____规则和程序进行_____，该_____为终局裁决，对双方均有约束力。_____费用除非另有决定，由败诉一方负担。

卖方：

买方：

外贸企业跟单员实习报告

外贸企业跟单员实习报告

在xx公司做实习的跟单员已两个星期有余，对于xx公司的毛巾出口业务也有了些基本的了解。实习期间的工作也使自己有不少的体会，从中也懂得了许多知识，现略作陈述。

一、对于工作流程的认识

纺织是一家以出口毛巾为主要业务的有限责任公司，其毛巾出口多达20个国家和地区，以日本和印度为主要出口国。销售经理接单分配给跟单员任务后，跟单员要及时的跟进，同生产车间沟通，安排机台的生产。样品生产出来之后，负责样品检测。由于生产一直在进行，所以有问题应及时的同生产主任沟通，保证生产出符合客户要求的产品。跟单员的另一项主要工作就是与外协加工厂的沟通，负责订购包装毛巾所需要的各种辅料，如纸箱、包装袋、卡头纸、腰封、不干胶等等。要求在生产车间将印染合格的毛巾运往整理车间之前将这些辅料送到仓库，以备及时的包装。确认产品的包装后，分配给整理车间包装职工任务，保证毛巾的按时装柜。

作为实习生，我的主要任务是认识各种产品，了解其所需要的各种辅料。从整理车间开始工作，学习产品的规格，包装方式以及所需要的各种辅料和相关外加工厂的基本情况。目前我已认识了车间的各种产品，对于生产车间和整理车间的基本运作也有所了解。

二、实习体会

其次是工作无处不是沟通。跟单员的主要工作其实一句话可以概括：保证按时交货！这就需要跟单员不断的与产品流经的各个部门相沟通。从线纱到毛巾，从辅料到包装，跟单员需要接触多个部门，并需要亲自到车间考察了解产品的生产进度，及时的跟进产品。这就需要具备灵活的沟通能力。作为尚在整理车间的实习生，当前的工作对象还仅限于车间主任，车间包装职工及我的两位上司。对待上司要恭敬服从，对待车间主任要认真严肃，对待包装职工要勤快可亲。我不确定这样的准则是否可以让我的工作变得更加的轻松流畅，这需要时间的检验。当然没有什么是绝对的真理，一切准则都随着时间环境的变化而改变，我会争取不断的进步。我已认识到沟通能力对于工作的重要性，希望自己可以在这方面一直提高吧！

三、工作建议

实习两个多星期，或者说在整理车间的两个多星期，我最大的感受就是Xx公司的企业凝聚力与Xx公司规模的不相匹配，即职工对于Xx公司的归属感还不足。没有归属感就不会有企业文化的认同，没有企业文化的认同就会导致企业结构的松散。对于车间的职工来说，她们只是Xx公司的匆匆过客，可以随便的离开而没有留恋。我目前接触的仍只是整理车间的包装职工，尽管她们算不上严格意义上的技术工种，但我认为她们也是一部分，她们也为发展贡献自己的青春。但她们自己并不认为自己是在为Xx公司工作，而是单纯的想着多挣钱。她们经常会抱怨功过时间过长，抱怨没有假期，抱怨没有任何的福利。坚持在工作是因为这比较自由，离开没有什么约束，她们也从不为发展着想。也许对于来说，她们走了再找人就行了，反正工作简单。但是她们离开后会去做什么呢？肯定是选择其他的毛巾公司，投奔竞争对手。资源永远都是有限的，人力资源也是如此。Xx公司还需在企业文化建设上另辟蹊径。

《外贸企业跟单员实习报告》到此结束，由于文笔欠缺，如有错误还请张经理见谅；若有做的不对或不好的地方也请张经理指正，不胜感激！

货物运输保险合同范本

运输保险合同是指货物的托运人向承运人交运货物时，向保险人支付保险费，在被保险货物发生保险合同约定损失时，由保险人负责赔偿损失的保险合同。货物运输保险合同是指以运输过程中的货物作为保险标的的保险合同。以下是第一范文网小编为大家精心准备的：货物运输保险合同相关范本。内容仅供参考，欢迎阅读!

货物运输保险合同范本一

发 票 号 码 保险单号次

中保财产保险有限公司(以下简称本公司)根据__________________(以下简称为被保险人)的要求由被保险人向本公司缴付约定的保险费，按照本保险单承保险别和背后所载条款与下列特款承保下述货物运输保险，特立本保险单。

标记 包装及量 保险货物项目 保险金额(表格呈现)

总 保 险 金 额：________________________________________

保费________________费率____________ 装 载 工 具_______________

开 航 日 期____________自_______________ 至_______________

承保险别：

所保货物，如发生保险单项下可能引起索赔的损失或损坏，应立即通知本公司下述代理人查勘。

如有索赔，应向本公司提交保险单正本(本保险单共有一份正本)及有关文件。

____________保 险 公 司

赔 款 偿 付 地 点

出 单 公 司 地 址

2.中保财产保险有限公司公路货物运输保险条款保险标的范围

第一条 凡在国内经公路运输的货物均可为本保险之标的。

第二条 下列货物非经投保人与被保险人特别约定，并在保险单(凭证)上载明，不在保险标的范围以内：金银、珠宝、钻石、玉器、首饰、古币、古玩、古书、古画、邮票、艺术品、稀有金属等珍贵财物。

第三条 下列货物不在保险标的范围以内：蔬菜、水果、活牲畜、禽鱼类和其他动物。

保险责任

第四条 由于下列保险事故造成保险货物的损失和费用，保险人依照本条款约定负责赔偿：

(一)火灾、爆炸、雷电、冰雹、暴风、暴雨、洪水、海啸、地陷、崖崩、突发性滑坡、泥石流;

(二)由于运输工具发生碰撞、倾覆或隧道、码头坍塌，或在驳运过程中因驳运工具遭受搁浅、触礁、沉没、碰撞;

(三)在装货、卸货或转载时因意外事故造成的损失;

(四)因碰撞、挤压而造成货物破碎、弯曲、凹瘪、折断、开裂的损失;

(五)因包装破裂致使货物散失的损失;

(六)液体货物因受碰撞或挤压致使所用容器(包括封口)损坏而渗漏的损失，或用液体保藏的货物因液体渗漏而造成该货物腐烂变质的损失;

(七)符合安全运输规定而遭受雨淋所致的损失;

(八)在发生上述灾害事故时，因纷乱造成货物的散失以及因施救或保护货物所支付的直接合理的费用。

责任免除

第五条 由于下列原因造成保险货物的损失，保险人不负赔偿责任：

(一)战争、敌对行为、军事行动、扣押、罢工、暴动、哄抢;

(二)地震造成的损失;

(三)盗窃或整件提货不着的损失;

(四)在保险责任开始前，被保险货物已存在的品质不良或数量短差所造成的损失;

(五)被保险货物的自然损耗、本质缺陷、特性所引起的损失或费用;

(六)市价跌落、运输延迟所引起的损失;

(七)属于发货人责任引起的损失;

(八)投保人、被保险人的故意行为或违法犯罪行为;

第六条 经国家有关部门认定的违法、非法货物，保险人不负赔偿责任。

第七条 其他不属于保险责任范围的损失。

责任起讫

第八条 保险责任的起讫期是自签发保险凭证后，保险货物运离起运地发货人的最后一个仓库或储运处所时起，至该保险凭证上注明的目的地的收货人在当地的第一个仓库或储存处所时终止。但保险货物运抵目的地后，如果收货人未及时提货，则保险责任的终止期最多延长至保险货物卸离运输工具后的15天为限。

保险价值和保险金额

第九条 保险价值按货价或货价加运杂费确定。

保险金额按保险价值确定，也可以由保险双方协商确定。

投保人、被保险人的义务

第十条 被保险人如果不履行下述任何一条规定的义务，保险人有权终止保险责任或拒绝赔偿部分或全部经济损失。

第十一条 投保人、被保险人应当履行如实告知义务，如实回答保险人就保险标的或者投保人、被保险人的有关情况提出的询问。

第十二条 投保人在保险人或其代理人签发保险单(凭证)的同时，应一次缴清应付的保险费。

第十三条 投保人应当严格遵守国家及交通运输部门关于安全运输的各项规定，还应当接受并协助保险人对保险货物进行的查验防损工作，货物运输包装必须符合国家和主管部门规定的标准。

第十四条 保险货物如果发生保险责任范围内的损失时，投保人或被保险人获悉后，应迅速采取合理的施救和保护措施并立即通知保险人的当地机构(最迟不超过10天)。

赔偿处理

第十五条 被保险人向保险人申请索赔时，必须提供下列有关单证：

(一)保险单(凭证)、运单(货票)、提货单、发票(货价证明);

(二)承运部门签发的事故签证、交接验收记录、鉴定书;

(三)收货单位的入库记录、检验报告、损失清单及救护保险货物所支付的直接合理的费用单据;

(四)其他有利于保险理赔的单证。

保险人在接到上述索赔单证后，应当根据保险责任范围，迅速核定应否赔偿。赔偿金额一经保险人与被保险人达成协议后，应在10天内赔付。

第十六条 保险货物发生保险责任范围内的损失时，按保险价值确定保险金额的，保险人应根据实际损失计算赔偿，但最高赔偿金额以保险金额为限;保险金额低于保险价值的，保险人对其损失金额及支付的施救保护费用按保险金额与保险价值的比例计算赔偿。保险人对货物损失的赔偿金额，以及因施救或保护货物所支付的直接合理的费用，应分别计算，并各以不超过保险金额为限。

第十七条 保险货物发生保险责任范围内的损失，如果根据法律规定或有关约定，应当由承运人或其他第三者负责赔偿一部分或全部的，被保险人应首先向承运人或其他第三者提出书面索赔，直至诉讼。被保险人若放弃对第三者的索赔，保险人不承担赔偿责任;如被保险人要求保险人先予赔偿，被保险人应签发权益转让书和应将向承运人或第三者提出索赔的诉讼书及有关材料移交给保险人，并协助保险人向责任方追偿。

由于被保险人的过错致使保险人不能行使代位请求赔偿权利的，保险人可以相应扣减保险赔偿金。

第十八条 保险货物遭受损失后的残值，应充分利用，经双方协商，可作价折归被保险人，并在赔款中扣除。

第十九条 被保险人从获悉保险货物遭受损失的次日起，如果经过2年不向保险人申请赔偿，不提供必要的单证，或者不领取应得的赔款，则视为自愿放弃权益。

第二十条 被保险人与保险人发生争议时，协商解决，双方不能达成协议时，按( )项办法处理：(1)提交仲裁机关仲裁;(2)向人民法院起诉。

其他事项

第二十一条 凡经公路与其他运输方式联合运输的保险货物，按相应的运输方式分别适用本条款及《铁路货物运输保险条款》、《水路货物运输保险条款》和《航空货物运输保险条款》。

第二十二条 凡涉及本保险的约定均采用书面形式。

货物运输保险合同范本二

第一章 总则

第一条 为使保险物在水路、铁路运输过程中，因遭受保险责任范围内的自然灾害或意外事故所造成的损失能够得到经济补偿，并加强货物运输的安全防防损工作，以利商品生产和商品流通，特举办本保险。

第二章 保险责任

第二条 本保险分为基本险和综合险两种。 保险货物遭受损失时，保险人按承保险别的责任范围负赔偿责任。

(一)基本险：

1.因火灾、爆炸、雷电、冰雹、暴风、暴雨、洪水、地震、 海啸、地陷、崖崩 、滑坡、泥石流所造成的损失;

2.由于运输工具发生碰撞、搁浅、触礁、倾覆、沉没、出轨或隧道、码头坍塌所造成的损失;

3.在装货、卸货或转载时，因遭受不属于包装质量不善或装卸人员违反操作规程所造成的损失;

4.按国家规定或一般惯例应分摊的共同海损的费用;

5.在发生上述灾害、事故时，因纷乱而造成货物的散失以及因施救或保护货物所支付的直接、合理的费用;

(二)综合险：本保险除包括基本险责任外，保险人还负责赔偿：

1.因受震动、碰撞、挤压而造成破碎、弯曲、凹瘪、折断、开裂或包装破裂使货物的散失的损失;

2.液体货物因受震动、碰撞或挤压致使所用容器(包括封口)损失坏而渗漏的损失，或用液体保藏的货物因液体渗漏而造成保藏货物腐烂变质的损失;

3.遭受盗窃或整件提货不着的损失;

4.符合安全运输规定而遭受雨淋所致的损失。

第三条 保险责任的起讫期是，自签发保险凭证和保险货物运离起运地发货人的最后一个仓库或储存处所时起，至该保险凭证上注明的目的地的收货人在当地的第一个仓库或储存处所时终止。但保险货物运抵目的地后，如果收货人未及时提货，则保险责任的终止期最多延长至以收货人接到《到货通知单》后的15天为限(以邮戳日期为准)。

第三章 除外责任

第四条 由于下列原因造成保险货物的损失，保险人不负赔偿责任：

1.战争或军事行动;

2.核事件或核爆炸;

3.保险货物本身的缺陷或自然损耗，以及由于包装不善;

4.被保险人的故意行为或过失;

5.其他不属于保险责任范围内的损失。

第四章 保险金额

第五条 保险金额按货价或货价加运杂费计算。

第五章 被保险人的义务

第六条 被保险人在保险人签发保险凭证的同时，应按照保险费率，一次缴清应付的保险费。

第七条 被保险人应当严格遵守国家及交通运输部门关于安全运输的各项规定，还应当接受并协助保险人对保险货物进行的查验防损工作，货物包装必须符合国家和主管部门规定的标准。

第八条 货物如果发生保险责任范围内的损失时，被保险人获悉后，应立即通知当地保险机构并应迅速采取施救和保护措施，防止或减少货物损失。

第九条 被保险人如果不履行上述各条规定的义务，保险人有权终止保险责任或拒绝赔偿一部分或全部经济损失。

第六章 货物检验及赔偿处理

第十条 货物运抵保险凭证所载明的目。的地的收货人在当地的第一个仓库或储存处所时起，收货人应在10天内向当地保险机构申请并会同检验受损的货物，否则保险人不予受。

第十一条 被保险人向保险人申请索赔时，必须提供下列有关单证：

1.保险凭证、运单(货票)、提货单、发货票;

2.承运部门签发的货运记录、普通记录、交接验收记录、鉴定书;

3.收货单位的入库记录、检验报告、损失清单及救护货物所支付的直接费用的单据。

保险人在接到上述索赔单证报告后，应当根据保险责任范围，迅速核定应否赔偿。赔偿金额一经保险人与被保险人达成协议后，应在10天内赔。

第十二条 货物发生保险责任范围内的损失时，按货价确定保险金额的，保险人根据实际损失按起运地货价计算赔偿;按货价加运杂费确定保险金额的，保险人根据实际损失按起运地货价加运杂费计算。但最高赔偿金额保险金额为限。

第十三条 如果被保险人投保不足，保险金额低于货价时，保险人对其损失金额及支付的施救保护费用按保险金额与货价的比例计算赔偿。保险人对货物损失的赔偿金额，以及因施救或保护货物所支付的直接、合理的费用，应分别计算，并各以不超过保险金额为限。

第十四条 货物发生保险责任范围内的损失，如果根据法律规定或者有关约定，应当由承运人或其他第三者负责赔偿一部或全部的，被保险人应首先向承运人或其他第三者索赔，如被保险人提出要求，保险人也可以先予赔偿，但被保险人应签发权益转让书给保险人，并协助保险人向责任方追偿。

第十五条 保险货物遭受损失后的残值，应充分利用，经双方协商可作价折归被保险人，并在赔款中扣除。

第十六条 被保险人从获悉或应当获悉货物遭受损失的次日起，如果经过180天不向保险人申请赔偿，不提出必要的单证，或者不领取应得的赔款，则视为自愿放弃权益。

第十七条 被保险人与保险人发生争议时，应当实事求是，协商解决，双方不能达成协议时，按下列第_________种方式解决：

1.提交_________仲裁委员会仲裁;

2.依法向人民法院起诉。

_________保险公司(盖章)：_________ 被保险人(签字)：_________

保险代理人(签字)：_________

_________年____月____日 _________年____月____日

签订地点：_________ 签订地点：_________

甲方： _______________（托运人）

法定代表人：____________________

法定地址：______________________

邮编：__________________________

经办人：________________________

联系电话：______________________

传真：__________________________

银行账户：______________________

乙方：_________________（承运人）

法定代表人：____________________

法定地址：______________________

邮编：__________________________

经办人：________________________

联系电话：______________________

传真：__________________________

银行账户：______________________

甲乙双方经过友好协商，就办理甲方货物海运出口订舱事宜达成如下合同：

1.乙方同意接受甲方的委托办理甲方有关货物的海运出口订舱事宜（具体货物品名、数量、装卸港等以甲方提交的订舱单为准）。

2.甲方按照乙方提供的格式订舱单如实地填写货物的品名、数量、质量、装卸港口等内容。对于填写错误而导致的损失或者责任，由甲方自行承担。

3.乙方应及时向甲方提供船期预报以及截止接单日期。上述船期预报不构成双方对船舶驶离装货港和抵达卸货港具体的时间约定，仅作为甲乙双方办理海运订舱事宜的参考。

4.甲方应根据船期预报，在截止接单日之前将订舱单送达乙方。对于超过截止接单日甲方要求加载的货物，乙方应积极配合甲方的要求，但是对于确实无法加载的货物，乙方不承担任何责任。

5.甲方的货物包装应适合海洋运输或者货物的特殊属性，包装外面应注明搬运、储存、防护等标识，具体的包装标准参见______。甲方如果对货物的储存、防护或者出口运输有特殊要求，应在订舱单上注明。在甲方货物包装明显不适应海洋运输或者货物特殊属性时，乙方对于货物在运输过程中的灭失或损坏不负责任。

对于货物本身以及货物包装不当造成的第三方的损失，仍应由甲方承担。

6.乙方在接到甲方的订舱单后，应立即办理配载等手续。除甲方能证明乙方在配载上有过错外，乙方不承担任何责任。如果货物未能如期配载，乙方应及时将有关情况通知甲方。

7.乙方接到甲方的订舱单后，甲方要求变更订舱单所列事项的，应在货物装船--天前向乙方出具书面更改单，注明日期并加盖甲方印章。因变更订舱事项所引起的各项费用，由甲方全部承担。

船舶在开航前，甲方要求解除订舱的，参照《海商法》的有关规定办理。

8.对于预付运费条款下的出口货物，乙方在配舱回单上应标注运费基价。甲方应于货物发运前，按照运费单价及货物数量向乙方指定的账户支付运费。如标注的运费单价有误， 甲方应在船舶开航前向乙方提出更正，否则视为接受乙方所标注的运费基价。

9.对于其他运费条款下的出口货物， 乙方在在配舱回单上应标注运费基价和运费支付的最后期限。甲方应于上述期限届满前，按照运费单价及货物数量向乙方指定的账户支付运费。如标注的运费单价有误，甲方应于上述期限届满前向乙方提出更正，否则视为接受乙方所标注的运费基价。

10.甲方应在运费支付期限届满之前，将运费支付至乙方指定的账户。对于逾期支付的款项，甲方应应按每日万分之五的比例向乙方支付违约金。

11.港杂费等其他费用，甲方应在收到乙方转来的帐单后五个工作日之内支付至乙方指定的账户。对于逾期支付的款项，甲方应按每日万分之五的比例向乙方支付违约金。

12.对于预付运费条款下的出口货物，在甲方未结清所有费用之前，乙方也有权滞留相应的运输单据，由此产生的所有损失和责任由甲方承担。甲乙双方对此另有约定的，从其约定。

13.乙方在办理甲方货物出口运输的过程中应尽心尽责，对于因乙方的过失而导致甲方遭受的损失和发生的费用承担责任，以上损失不包括货物因延迟等原因造成的经济损失。在任何情况下，乙方的赔偿责任都不应超出每件________元人民币或每公斤________元人民币的责任限额，两者以较低的限额为准。

14.如货物的灭失或者损坏是由于《海商法》第五十一条所列明的原因造成的，乙方不承担任何责任。

15.本合同项下发生的任何纠纷或者争议，应提交海事法院审理。

或者

本合同项下发生的任何纠纷或者争议，应提交中国海事仲裁委员会，根据该会的仲裁规则进行仲裁。

仲裁裁决是终局的，对双方都有约束力。

（注：上述两条款，只能选择一项，请各单位自行决定。）

本合同的订立、效力、解释、履行、争议的解决均适用中华人民共和国法律。

16.本合同从甲乙双方签字盖章之日起生效，合同有效期为一天，合同期满之日前，甲乙双方可以协商将合同延长____天。合同期满前，如果双方中任何一方欲终止合同，需以书面的形式通知另一方。

17.本合同经双方协商一致可以进行修改和补充，修改及引、充的内容经双方签字盖章后，视为本合同的一部分。本合同正本一式 _____份。

甲方：______________

签字盖章：__________

_______年____月___日

乙方：______________

签字盖章：__________

_______年____月___日