外贸合同中有哪些合同条款【汇集20篇】

甲方：

法定代表人：

地址：

编码：

电话：

邮箱：

乙方：

法定代表人：

地址：

编码：

电话：

邮箱：

根据《_____》及相关法律法规的规定，为明确甲乙双方在货物运输代理中的权利义务，维护货物运输代理合同双方的权益，规范货物运输代理行为，甲乙双方经过充分协商，就甲方委托乙方提供货物运输代理服务事宜达成以下合同条款，以便双方共同遵照执行。

一、货物运输代理事项

甲方委托乙方代为办理_________省_________市至全国的货物运输事项，乙方代理事项包括：

1、代为委托符合条件的司机承运货物。

2、代为安排司机提取运输的货物。

3、代为安排司机交付运输货物给收货人。

4、代为委托司机办理收货人签收运输单证并转交给甲方。

5、根据甲方要求代为购买运输货物的_____。

二、货物运输代理期限

本合同有效期，自_________年_________月_________日起至_________年_________月_________日止。

三、货物运输代理双方的权利义务

（一）甲方的权利义务

1、甲方在每一单运输前应将运输货物的名称、性质、重量、数量、尺寸、包装状况以及收货方名称、电话、收货地点等有关货物运输的必要情况书面告知乙方，由乙方转告司机。

2、甲方委托乙方代为办理运输的货物的包装及相关标识应符合国家相关部门的标准要求以及公路运输安全的要求。

3、甲方对于货物尺寸超长、超高、超宽以及对运输有特殊要求等情形，应提前告知乙方，以便乙方告知司机采取相应的运输方式。如需要特殊加固车厢时，甲方应承担相应的费用。

4、如甲方需运输的货物属于易燃易爆危险品和国家限运物品以及需要办理检疫、商检、海关、公安、林业手续的货物，交运前，甲方应提供有关机关的准运证明，并使运输的货物及其包装适合公路运输的要求。

5、甲方承担货物装上运输_____前及卸下运输_____后的全部责任。

6、甲方应按照运输货物的实际价值委托乙方购买运输货物的_____，如贵司申报货值与货物实际价值不符时，货物出险后的货值的差额部分将无法获得赔付，由此造成的一切责任及损失将由贵司承担。

7、甲方应及时通知收货人保持通讯畅通，在双方约定的时限内准备接车收货。甲方有权随时了解运输货物在途情况。

8、甲方在乙方_____出发后变更送货目的地的，应及时以书面形式将变更的详细情况通知乙方及司机，并承担因此增加的费用。

9、甲方应按照合同约定向乙方支付代理费及相关费用。

10、甲方委托的货物必须是符合条件运输的，不能有违禁品。

（二）乙方的权利义务

1、乙方应根据甲方的要求以及运输货物的实际情况，代为甲方委托符合运输条件的司机及_____。

2、乙方应要求司机：按照约定的时间到达甲方指定地点提取运输的货物，并对运输的货物的外包装进行适当的检查。如发现货物外包装有破损或明显不适合运输时，应暂停提货并告知甲方，甲方应尽快告知乙方及司机处理结果。在甲方确认对货物进行运输及该货物外包装适合进行运输时，司机应按合同约定为甲方承运该货物。

3、乙方应告知司机在装车时应与甲方人员核实所装货物的品名、件数及包装情况。甲方应积极协助司机办理装货事宜。装车完毕，甲方应将随货同行的有关票据，收货人姓名、电话及详细卸货地址等资料一并交与司机，以便运输途中备查和到达目的地后及时交货、签收。

4、乙方应要求司机在约定的期限内将甲方的货物安全运送到甲方指定的地点。

5、司机在运输途中如发生意外事故（交通事故、_____本身机械故障等），不能正常行驶时，应对货物采取必要的安全保护措施。如_____完全失去运输能力，乙方应另行代为委托_____承运，将货物完整无损的送到收货地点，并及时通知甲方。

6、乙方按照合同约定收取甲方支付的代理费用及相关费用。

7、乙方在履行合同过程中，因不可抗力的原因，导致不能履行或不能完全履行合同义务的，乙方不承担违约责任。

四、货物运输代理费用及结算

1、委托运输费用，另行商议。

2、_____：甲方自行购买_____或委托乙方代购_____，_____费率另议。

3、结算方式：每月5日前核对确认上个月的费用，乙方开具发票给甲方，甲方收到发票后30日内以转账支票或现金支付运费。

五、违约责任

1、由于乙方的过错，造成运输的货物迟延到达，乙方应承担迟延到达的违约责任。由于司机的过错，造成运输的货物迟延到达，司机应承担迟延到达的违约责任。

2、从货物装运上车时起，至货物运抵目的地卸车交付完毕时止，司机应对货物的灭失、短少、损坏负责，乙方协助甲方向投保的_____公司对货物损失进行索赔。

3、货物错运目的地，由司机无偿运到约定地点，交给指定的收货人，由此造成的货物逾期到达，按本条第一项的规定处理。

4、甲方错报运输货物的名称、性质、重量、数量、尺寸、包装状况以及收货方名称、电话、收货地点等有关货物运输的必要情况，甲方承担相应增加的费用。

5、甲方委托乙方代理运输的货物的包装及相关标识不符合国家相关部门的标准要求以及公路运输安全要求的，或对于货物尺寸超长、超高、超宽以及对运输有特殊要求等情形未提前告知乙方，因此造成货物灭失、损坏的，乙方及司机不承担赔偿责任。

6、甲方在普通货物中夹带、匿报危险品或其他违反危险品运输规定的行为，因此造成交通事故或给乙方、司机造成损失的，应承担赔偿责任。

7、甲方未按照合同约定支付代理费用、运费的，应承担迟延履行合同的违约责任，因此给乙方造成损失的，应承担赔偿责任。

六、其他约定

1、本合同未尽事宜，双方应友好协商，可签订补充协议。补充协议与本合同具有同等法律效力。

2、争议解决方式：双方对本合同的履行发生争议时，应友好协商解决。协商不成时，双方均可向乙方住所地人民法院提起诉讼。

3、本合同经双方签字盖章后生效。

4、本合同一式二份，双方各持一份，具同等法律效力。

甲方（盖章）：

法定代表人（签字）：

日期：_________年_________月_________日

乙方（盖章）：

法定代表人（签字）：

日期：_________年_________月_________日

2020出口贸易合同范本

【篇一】

出口贸易合同

甲方（卖方）：

乙方（买方）：

双方同意按下列条款由甲方出售，乙方购进货物：

第一条货物名称、规格、包装：，

出口贸易合同[智库|专题]。

第二条货物数量：

第三条货物单价：。

第四条买卖货物总值：

第五条货物装运期限：

第六条货物装运口岸：。

第七条目的口岸：

第八条货物保险：由甲方按fa票金额投保。

第九条付款条件：乙方应通过买卖双方同意的银行，开立以甲方为受益的人，不可撤销的、可转让和可分割的、允许分批装运和转船的信用证。该信用证凭装运单据在中国的中国银行见单即付。

该信用证必须在前开出。

信用证有效期为装船后天在中国到期。

第十条单据：甲方应向议付银行提供已装船清洁提单、fa票，装箱单/重量单。第十一条装运条件：

①载运船只由甲方安排，允许分批装运并允许转船，

②甲方于货物装船后，应将合同号码、品名、数量、船名、装船日期以电报通知乙方。第十二条品质和数量/重量的异议与索赔：货到目的口岸后，乙方如发现货物品质及/或数量/重量与合同规定不符，附属于保险公司及/或船公司的责任外，乙方可以凭双方同意的检验机构出具的检验证明向甲方提出异议。品质异议须于货到目的口岸之日起30天内提出，数量/重量异议须于货到目的口岸之日起15天内提出。甲方应于收到异议后30天内答复乙方。

第十三条人力不可抗拒因素：由于人力不可抗拒事故，是甲方不能在本合同规定期限内交货或者不能交货的，甲方不负责任。但甲方必须立即以电报通知乙方。如乙方提出要求，甲方应以挂号函向乙方提供由中国国际贸易委员会或有关机构出具的事故证明文件。第十四条仲裁：凡因执行本合同或与本合同有关事项所发生的一切争执，应由双方通过友好方式协商解决。如果不能取得协议时，则在被告国家根据被告国家仲裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的，对双方具有同等的约束力，仲裁费用除非仲裁机构另有约定外，均由败诉一方负担。

第十五条备注：。甲方（盖章）：甲方（盖章）：代表人（签字）：代表人（签字）：电子邮箱：电子邮箱：年月日年月日

【篇二】

合同编号 contract no：＿＿＿＿＿＿＿＿＿＿＿

签订日期 date：＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿

签订地点 signed at：＿＿＿＿＿＿＿＿＿＿＿＿

卖方：＿＿＿＿＿＿＿＿＿＿ 电话tel：＿＿＿＿＿＿＿＿＿＿＿＿

the sellers： 传真fax：＿＿＿＿＿＿＿＿＿＿＿＿

地址：＿＿＿＿＿＿＿＿＿＿ 电报cable：＿＿＿＿＿＿＿＿＿＿＿

address： 电传telex：＿＿＿＿＿＿＿＿＿＿＿

买方：＿＿＿＿＿＿＿＿＿＿ 电话tel：＿＿＿＿＿＿＿＿＿＿＿＿

the buyers： 传真fax：＿＿＿＿＿＿＿＿＿＿＿＿

地址：＿＿＿＿＿＿＿＿＿＿ 电报cable：＿＿＿＿＿＿＿＿＿＿＿

address： 电传telex：＿＿＿＿＿＿＿＿＿＿＿

经买卖双方确认根据下列条款订立本合同：

the undersigned sellers and buyers have confirmed this contract in accordance with the terms and conditions stipulated below:

1.

┏━━━━┯━━━━━━┯━━━┯━━━━━┯━━━━━━┯━━━━━┓

┃货号 │名称及规格 │ 单位│ 数量 │ 单价 │ 金额 ┃

┃art no. │descriptions│ unit│ quantity │unit price │ amount ┃

┠────┼──────┼───┼─────┼──────┼─────┨

┃ │ │ │ │ │ ┃

┃ │ │ │ │ │ ┃

┃ │ │ │ │ │ ┃

┃ │ │ │ │ │合计： ┃

┃ │ │ │ │ │totally: ┃

┠────┴──────┴───┴─────┴──────┴─────┨

┃总值（大写）： ┃

┃total value：(in words) ┃

┗━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━┛

允许溢短＿＿＿＿＿＿＿＿＿＿＿％。

＿＿＿＿＿＿＿＿＿＿＿％more or less in quantity and value allowed.

2.成交价格术语：fob cfr cif ddu

terms:

3.包装：

packing

4.装运唛头：

shipping marks:

5.运输起讫：由＿＿＿＿＿＿经＿＿＿＿＿＿到＿＿＿＿＿＿

shipment from＿＿＿＿＿＿to ＿＿＿＿＿＿

6.转运：允许 不允许；分批装运：允许 不允许

transhipment： allowed not allowed

partial shipments: allowed not allowed

7.装运期：

shipment date:

8.保险：由＿＿＿＿＿按发票金额110％，投保＿＿＿＿＿＿＿险，另加保＿＿＿＿＿险至＿＿＿＿＿＿＿为止。

insurance: to be covered by the ＿＿＿＿ for 110％ of the invoice value covering ＿＿＿ additional ＿＿＿＿ form ＿＿＿ to ＿＿＿.

9.付款条件：

terme of payment:

买方不迟于＿＿＿＿年＿＿＿月＿＿＿日前将100％的货款用即期汇票/电汇送抵卖方。

the buyers shall pay 100％ of the sales proceeds through sight (demand) draft/by t/t remittance to the sellers not later than ＿＿＿＿＿＿＿

买方须于＿＿＿＿＿＿年＿＿＿月＿＿＿日前通过＿＿＿银行开出以卖方为受益人的不可撤销＿＿＿＿＿＿无期信用证，并注明在上述装运日期后＿＿＿＿＿＿天内在中国议付有效，信用证须注明合同编号。

the buyers shall issue an irrevocable l/c at ＿＿＿＿＿ sight through ＿＿＿＿ in favour of the sellers prior to ＿＿＿＿indicating l/c shall be valid in china through negotiation within ＿＿＿＿＿＿ day after the shipment effected, the l/c must mention the contract number.

付款交单：买方应对卖方开具的以买方为付款人的见票后＿＿＿＿＿天付款跟单汇票，付款时交单。

documents against payment: (d/p)

the buyers shall duly make the payment against documentary draft made out to the buyers at ＿＿＿ sight by the sellers.

承兑交单：买方应对卖方开具的以买方为付款人的见票后＿＿＿＿＿天承兑跟单汇票，承兑时交单。

documents against acceptance: (d/a)

the buyers shall duly accept the documentary draft made out to the buyers at ＿＿＿ days by the sellers.

10.单据：卖方应将下列单据提交银行议付/托收。

documents requireo: the sellers shallpresent the following documentsrequired for negotiation/collection to the banks.

整套正本清洁提单。

full set of clean on board ocean bills of lading.

商业发票一式＿＿＿＿＿＿＿＿份。

signed commercial invoice in ＿＿＿＿copies.

装箱单或重量单一式＿＿＿＿＿＿＿份。

packing list/weight memo in ＿＿＿＿＿＿copies.

由＿＿＿＿＿＿＿签发的质量与数量证明书一式＿＿＿＿＿＿份。

certificate of quantity and qualityin ＿＿＿ copies issed by ＿＿＿

保险单一式＿＿＿＿＿份。

insurance policy in ＿＿＿＿ copies.

由＿＿＿＿＿＿签发的产地证一式＿＿＿＿＿＿＿＿＿份。

certificate of origin in ＿＿＿＿＿ copiesissued by ＿＿＿＿＿＿＿＿

11.装运通知：一俟装运完毕，卖方应即电告买方合同号、品名，已装载数量、发票总金额，毛重，运输工具名称及启运日期等

shipping advice: the sellers shall immediately，upon the completion

of the loading of the goods, advise the buyers of the contrant no, name

s of commodity, loaded quantity, invoice values, gross weight, names of

vessel and chipment date by tlx/fax.

12.检验与索赔

inspection and claims:

①卖方在发货前由＿＿＿＿＿＿＿检验机构对货物的品质、规格和数量进行检验，并出具检验证明书。

the buyers shall bave the qulities, specifications, quatities of ths goods carefully inspected by the ＿＿＿＿＿＿ inspection authority, which shall issue inspection certificate before shipment.

②货物到达目的口岸后，买方可委托当地的商品检验机构对货物进行复检。如果发现货物有损坏、残缺或规格、数量与合同规定不符，买方须于货到目的口岸的＿＿＿＿＿＿天内凭＿＿＿＿＿＿检验机构出具的检验证明书向卖方索赔。

the buyers have right to have the goods inspected by the local commodity inspection authority after the arrival of the goods at the port of

destination. if the goods are found damaged/short/their specifications and quantities not in compliance with that specified in the contract, thebuyers shall lodge claims against the sellers based on the inspection certificate issued by the commodity inspection authority within ＿＿＿ days after the goods arrivalat the destination.

③如买方提出索赔，凡属品质异议须于货到目的口岸之日起＿＿＿＿＿天内提出；凡属数量异议须于货到目的口岸之日起＿＿＿＿＿＿天内提出。对所装货物所提任何异议应由保险公司、运输公司或邮递机构负责的，卖方不负任何责任。

the claims, if any regarding to the quality of the goods, shall be lodged within ＿＿＿ days after arrival of the goods at the destination,

if any regarding to the quantities of the goods, shallbe lodged within

＿＿＿ days after arrival of the goods at the destination. the sellers shall not take any responsibility if anyclaims concerning the shipping goods isup to the responsibility of insurance company/transportation company/post office.

13.人力不可抗拒：如果人力不可抗拒的原因造成本合同全部或部分不能履约，卖方概不负责，但卖方应将上述发生的情况及时通知买方。

force majeure: the sellers shall not hold any responsibility for partial or total non-performance of this contractdue to force majeure. but

the sellers shall advise the buyers on time of such occurrence.

14.争议之解决方式：

disputes settlement:

任何因本合同而发生或与本合同有关的争议，应提交中国国际经济贸易仲裁委员会，按该会的仲裁规则进行仲裁。仲裁地点在中国。仲裁裁决是终局的，对双方均有约束力。

all disputes arising out of the contractor concerning the contract,

shall be submitted to the china international economic and trade arbitration commission for arbitrationin accordance with its rules of arbitrationin china. the arbitration shall take placein china. the arbitral awardis finaland binding upon both parties.

15.法律适用：

law application:

本合同之签订地、或发生争议时货物所在地在中华人民共和国境内或被诉人为中国法人的，适用中华人民共和国法律，除此规定外，适用《联合国国际货物销售合同公约》。

it will be governed by the law of the peoples republic of china under the circumstances that the contract is signed or the goods while the disputes arising are in the peoples republic of china or the deffendant is chinese legal person, otherwise it is governed by united nations convention on contract for the international sale of goods.

本合同使用的fob、cfr、cif、ddu术语系根据国际商会《incoterms 1990》。

the terms in the contract are basedon incoterms 1990 of the international chamber of commerce.

16.文字：本合同中、英两种文字具有同等法律效力，在文字解释上，若有异议，以中文解释为准。

versions: this contract is made outin both chinese and english of which versionis equally effective. conflicts between these two languages arising therefrom, if any, shall be subject to chinese version.

17.附加条款（本合同上述条款与本附加条款抵触时，以本附加条款为准）：

additional clause: (conflicts between contract clause here-above an

d this additional clause, if any, it is subject to this additional clau

se)

18.本合同共＿＿＿＿＿＿＿份，自双方代表签字（盖章）之日起生效。

this contract is in ＿＿＿ copies, effective since being signed/sealed byboth parties.

卖方代表人： 买方代表人：

representative of the sellers: representative of the buyers:

签字： 签字：

authorized signiture: authorized signiture:h1206--010831lwj

拟订英文合同是进出口买卖中一项重要的工作。这个合同都包括哪些内容，其中的语言该怎么表达呢。下面给大家提供一段参考范文：

合同 CONTRACT

日期：                            合同号码：

Date:                             Contract No.:

买 方： (The Buyers)              卖方： (The Sellers)

兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品：

This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter:

(1) 商品名称:

Name of Commodity：

(2) 数 量：

Quantity:

(3) 单 价：

Unit price:

(4) 总 值：

Total value:

(5) 包 装：

Packing:

(6) 生产国别：

Country of Origin :

(7) 支付条款：

Terms of Payment:

(8) 保 险：

Insurance:

(9) 装运期限：

Time of Shipment:

(10) 起 运 港：

Port of Lading:

(11) 目 的 港：

Port of Destination:

(12)索赔：在货到目的口岸45天内如发现货物品质，规格和数量与合同不符，除属保险公司或船方责任外，买方有权凭中国商检出具的检验证书或有关文件向卖方索赔换货或赔款。

Claims:

Within 45 days after the arrival of the goods at the destination, should the quality, Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable.

The Buyers shall, have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers.

(13)不可抗力：由于人力不可抗力的原由，发生在制造、装载或运输的过程中导致卖方延期交货或不能交货者，卖方可免除责任。在不可抗力发生后，卖方须立即电告买方及在14天内以空邮方式向买方提供事故发生的证明文件，在上述情况下，卖方仍须负责采取措施尽快发货。

Force Majeure:

The sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to Force Majeure, which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after. The Sellers shall send by airmail to the Buyers for their acceptance certificate of the accident. Under such circumstances the Sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods.

(14）仲裁：凡有关执行合同所发生的一切争议应通过友好协商解决，如协商不能解决，则将分歧提交中国国际贸易促进委员会按有关仲裁程序进行仲裁，仲裁将是终局的，双方均受其约束，仲裁费用由败诉方承担。

Arbitration:

All disputes in connection with the execution of this Contract shall be settled friendly through negotiation. In case no settlement can be reached, the case then may be submitted for arbitration to the Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure promulgated by the said Arbitration Commission. The Arbitration committee shall be final and binding upon both parties. And the Arbitration fee shall be borne by the losing parties.

买方：                                         卖方:

（授权签字）                                  （授权签字）

委托方(以下简称甲方)：_________

受托方(以下简称乙方)：_________

根据《中华人民共和国民法典》有关规定，经甲乙双方友好协商，就甲方委托乙方进行货物运输代理有关事宜达成以一下协议。

第一条 ：代理事项

1.甲方委托乙方为货运代理人，进行货物运输代理。乙方接受甲方委托，同意作为甲方代理人，办理有关代理事项。

2.甲方应根据本协议内容，向乙方签发委托书，以便乙方完成代理事项。甲方委托乙方办理事项详见《货物运输代理授权委托书》。

第二条 ：甲方责任

1.应于提出的发运日期(或运到日期)前_________日向乙方提供有关运输的资料与要求(包括发运地点、到货地点、货物品名、数量、性质、是否办理保价(险)、收货人全称、联系电话、传真等真实资料)，并盖章确认。

2.于每批货物发运前_________日，将需要运输的货物完整地交付给乙方，并与乙方共同办理交接验收。

3.已包装或因其他原因不易清点的货物内容和数量，由甲方自行负责。

4.已交付给乙方的资料或货物确需变更时应提前_________日书面通知乙方。

5.应在本协议约定的时间内将运输代理服务费(或包干费)支付给乙方。

第三条 ：乙方责任

1.根据甲方的要求与提供的资料，按照本协议的规定，及时完成代理事项。

2.及时向甲方报告运输代理事务的进展情况，代理行为完成后，应将有关单据证明交付甲方。

3.对甲方提供的各种资料、文件应予以保密。

第四条 ：代理费用及结算方法

1.本协议履行期间，甲方同意以运输代理服务费(或包干费)的形式给付乙方。每运输代理_________吨货物，甲方给付乙方_________元运输代理服务费(或包干费)。运输代理服务费(或包干费)的计算按车辆(船)标重为结算依据;

2.为便于清算，双方同意_________日清算一次，结算方式为_________;

3.需由乙方代结算各种运杂费用的，由甲方按代理量预付乙方所需费用，并于运输前_________日汇入乙方银行账户(需由乙方代垫各种费用的，甲方需提前向乙方提出书面要求，并经乙方同意，双方签订垫付运杂费协议书后，方可垫付)。

4.费用结算后，乙方将有关票据、单证完整、及时交付甲方。

第五条 ：违约责任

1.在协议期内甲方给乙方的文件资料、货物有误或需要包装的货物因包装缺陷产生破损，或未将货物送到指定地点，而由此使乙方在代理行为中产生的经济损失，甲方应承担责任。

2.乙方未按协议要求运输也承担责任。乙方未经甲方同意，擅自扩大、变更代理权限，而由此造成甲方的经济损失，乙方应承担赔偿责任。

3.由于乙方原因使货物发生灭失、短少、变质、污染、损坏的，属法律、法规规定以外的乙方应承担责任。

4.由于不可抗力或_________时，双方协商可变更或解除本协议。

第六条 ：争议的解决

双方因协议发生争议并协商不成时，可用下列第_________种方式解决(以"√"选择)：

1.向_________仲裁委员会申请仲裁;

2.向_________法院诉讼。

第七条 ：其他事项

1.本协议经双方当事人签字盖章后生效。如有未尽事宜，双方协商签订备忘录。经双力签的本协议附件，为本协议不可分割的组成部分。

2.协议签订后，任何一方不得擅自变更或解除。如确有特殊原因不能继续履行或需变更时，需经双方同意，协商解决。

3.本协议有效时间_________年_________月_________日起至_________年_________月_________日止。

甲方：乙方： 鉴证机关：(盖章)

法定代表人：法定代表人：

委托代理人：委托代理人： 鉴证时间：

电话： 电话：

开户银行： 开户银行：年 月 日

帐号： 帐号：

地址： 地址：鉴证员：(签字盖章)

邮政编码： 邮政编码：

发包方(甲方)：________

承包方(乙方)：________

根据《中华人民共和国民法典》及通信工程建设的有关法律、法规的规定，结合本工程的具体情况，经双方协商一致，签订本合同，以资共同遵守。

第一条 工程概况

1.工程名称：________

2.工程地点：________

3.工程范围和内容：________

第二条 甲方权利和义务

1.组织工程建设项目的技术交底，向乙方明确施工任务;

2.提供必要的施工条件;

3.负责主材的供应，详见发包人供应材料、设备一览表;

4.指派甲方代表对建设工程项目进行全面协调和监督检查;

5.在乙方提供全套竣工资料和书面竣工验收报告后会同有关部门及时组织验收;

6.按合同约定按时向乙方支付工程款。

第三条 乙方权利和义务

1.必须具有经国家有关部门批准的通信行业施工资质，并经铁通工程建设有限公司浙江分公司核准的施工入围资格，并向甲方提供企业(或公司)施工资质证书、企业基本情况等相关资料;

2.应编制《工程施工概、预算》，经甲方书面认可后作为签订本合同暂定工程款的依据;

3.乙方不得将其承包的全部工程转包给他人，也不得将其承包的全部工程肢解以后以分包的名义分别转包给他人;

4.非经甲方同意，乙方不得将承包工程的任何部分分包;

5.精心组织施工管理人员、施工人员、材料、施工机械进场施工;

6.合理组织施工，编制施工方案、施工总进度计划、材料供应计划，并在施工前送甲方备案;

7.严格按设计文件及《gb/t50312-20__》、《本地网通信线路工程验收规范yd5051-97》等规范要求施工;

8.做好施工材料的检验、清点和保管，乙方采购的材料应按照约定及设计和有关标准要求采购，并提供产品合格证明，对材料设备的质量负责，采购的材料设备须经甲方书面认可后方能使用，采购的材料设备与设计或标准要求不符时，应重新采购符合要求的产品，并承担由此发生的费用及延误工期的责任;

9.服从甲方监理及甲方代表对施工过程的管理与监督，工程具备隐蔽条件或达到约定的中间验收部位，乙方进行自检，并在隐蔽或中间验收前48小时以书面形式通知甲方监理及甲方代表验收。通知包括隐蔽和中间验收的内容、验收时间和地点。乙方准备验收记录，验收合格，甲方监理及甲方代表在验收记录上签字后，乙方可进行隐蔽和继续施工。否则，甲方有权要求乙方返工，并由乙方承担返工费用及延误工期的责任;

10.线路工程的施工，乙方同时承担电话机及数据终端的安装任务。在施工过程中和工程竣工后半年内，乙方应服从甲方的要求进行该项目范围内的电话机及数据终端的安装工作。安装费用由甲乙双方商议决定。

11.施工过程中必须严格遵守安全操作规程，采取必要的安全防护措施，消除事故隐患，切实做好安全生产工作。乙方在施工中所发生的一切人身伤亡事故和施工单位原因造成的设备事故，事故的责任和因此发生的费用由乙方承担，并不得因此影响工程进度。

第四条 工程期限本工程开工日期______年____月____日，竣工日期______年____月____日。

第五条 竣工验收

1.工程竣工后，乙方应向甲方提交竣工验收报告。同时乙方应在一周内按________号关于《工程竣工文件编制规定》的要求编制完整的竣工文件。

2.甲方收到乙方提供的全套竣工资料和书面竣工验收报告后会同有关部门及时组织验收，验收以施工图纸、图说、技术交底纪要、设计更改通知、国家颁发的施工验收规范和质量检验标准为依据。

3.验收合格后，双方签署竣工验收通过的文件，并将工程移交给甲方管理。验收中如发现有不符质量要求的，由乙方负责修改再进行验收。竣工日期以验收通过的日期为准。

第六条 质量保证

1.保修期限：工程竣工验收通过后十二个月;

2.保修责任：乙方对交付的工程在质量保修期内承担质量保修责任，由于乙方施工原因造成的质量问题，乙方负责无偿修复。

第七条 工程考核

1.乙方采购的材料不符合质量标准或弄虚作假、以次充好，一经发现，乙方自行承担整改所需的工料费，同时向甲方支付工程最终结算价款____%的违约金，甲方有权在工程款结算时予以扣除。情节恶劣的，取消乙方入围施工资格。

2.除甲方原因及不可抗力外，工期延误的责任由乙方承担，每延期一天乙方应向甲方支付工程最终结算价款0.5%的违约金，甲方有权在工程款结算时予以扣除。

3.不服从甲方指挥，拒绝或延误电话机及数据终端安装，乙方向甲方支付工程最终结算价款____%的违约金，甲方有权在工程款结算时予以扣除，并同时取消乙方入围施工资格。

4.未按期按________号关于《工程竣工文件编制规定》的要求编制完整的竣工文件的，每延期一天乙方应向甲方支付工程最终结算价款0.5%的违约金，甲方有权在工程款结算时予以扣除。

第八条 工程价款的结算与支付

1.本工程采用包工部分包料方式，根据乙方编制的施工预算，合同价暂定为________。

2.工程竣工后，由乙方按照邮电部(1995)626号文件《通信建设工程概算、预算编制办法及费用定额》的规定据实编制竣工决算报告，经甲方指定的具有通信工程审计资质的第三方审计，审计费的支付按浙江省物价局浙价服[20__]262号文件执行。

3.工程最终结算款的确定：工程最终结算款由以下两部分组成，(1)审计审定价款中乙方采购的材料款和其他费用不作调整，按审计的价款确定;(2)审计审定价款中的建筑安装工程费部分(扣除材料费以外的部分)，乙方同意按________号文的规定调整相关费率后下浮____%.

4.乙方向甲方开具建安和材料统一发票后，甲方先行支付工程最终结算价款的90%(甲方有权在该款项中扣除乙方应支付的违约金)，待十二个月保修期满后，若无工程质量遗留问题，甲方付清剩余工程价款。

第九条 合同解除

1.双方协商同意可解除本合同。

2.未经甲方同意，乙方将承包工程的任何部分分包给他人的，甲方有权解除本合同。

3.乙方将其承

包的全部工程转包给他人或者肢解以后以分包的包义分别转包给他人的，甲方有权解除本合同。

4.有下列情形之一的，甲方、乙方可以解除合同：

(1)因不可抗力致使合同无法履行;

(2)因一方严重违约致使合同无法履行。

5.一方依据本条2、3、4款约定要求解除合同的，应以书面形式向对方发出解除合同的通知，通知到达对方时合同解除，合同解除后乙方应做好已完工程的保护和移交工作，并按甲方要求将自有机械设备和人员撤出施工场地。有过错的一方应当赔偿因合同解除给对方造成的损失。

第十条 争议解决方式在履行合同时发生争议，双方协商解决，或向有管辖权的人民法院起诉。

第十一条 其他

1.乙方确认其完全了解本合同中所述的铁通公司的相关文件内容;

2.本协议未尽事项，双方另行签订补充协议，补充协议与本协议具有同等效力;

3.本协议一式六份，甲乙双方各执三份，协议经双方签字、盖章后生效。

甲方(盖章)：________

地址：________

法定代表人：________

委托代理人：________

开户银行：________

帐号：________

电话：________

邮政编码：________

乙方(盖章)：________

地址：________

法定代表人：________

委托代理人：________

开户银行：________

帐号：________

电话：________

邮政编码：________

签约日期：______年____月____日

签约地点：________

出租人：___________承租人：___________

签定地点：__________签定时间：__________

根据民法典，经双方友好协商一致，特签定本合同。

一、设备清单__________________.

二、租用期限

1.甲方于___________年___________月___________日至___________年___________月___________日为乙方提供以上设备的租赁服务。租期_____天，租金________________元/台/天。合计______________.

2.乙方决定租用此设备后，应交纳该设备同等金额货款作为押金，方可提取该设备。乙方归还该设备时，将租金一次性全额付给甲方，甲方同时退还乙方押金。

3.租赁物交付的时间、地点、方式及验收：________________出租人在合同签定地点将租赁物交给承租人，承租人开机实地实物验收，承租人签定本合同表示对该租赁物已验收。

三、注意事项1.乙方在租用期间不得转租，不能中途退租乙方不能擅自拆改设备，必须妥善正确使用，确保设备完好无损，否则造成的一切损失由乙方承担。

2.乙方未和甲方签定续租合同则承租人需在租期结束的第_________天把所租机器退还。如要续租，双方需重新签定新租赁合同，甲方有权在本合同逾期后的任何时候收回该设备及取收必要的逾期费用。

四、补充规定

1.经费赔偿如承租人在使用时造成所租机器损坏，则按以下项目赔偿：________________外壳：________________损伤不影响外观赔偿____________________元损伤影响外观赔偿___________________元镜头/显示屏：________________有划痕不影响使用___________________元影响使用按市场价赔偿灯泡/主板损坏：______________元其他附件：________________如无法修复则按市场价赔偿

2.本合同未叙详尽并需补充之事，双方应共同协商作出补充规定，补充规定与本合同具有同等法律效力。在履行过程中发生争议，由双方当事人协商解决

3.本合同未作规定的，按照《中华人民共和国民法典》的规定执行。

4.本合同一式两份，由甲乙双方各执一份。合同自双方签字______日起生效。

承租人：_______________法人代表：_____________电话：_________________地址：_________________出租人：_______________法人代表：_____________电话：_________________地址：_________________

甲方（委托方）：法定代表人：乙方（受托方）：法定代表人：根据《中华人民共和国对外贸易法》《民法典》及其他相关法律法规，甲乙双方就代理进口事宜，本着互利互惠的原则，经友好协商，达成协议如下：

一、总则

1、本协议是双方为建立长期的进口代理关系的框架协议，双方就具体代理进口事项签订的文件（包括但不仅限于采购订单、采购合同、买卖合同、购销合同等）与本协议约定不一致的，以本协议约定为准。

2、乙方根据甲方的委托，从境外供应商进口货物，并提供所述货物之物流服务。

3、乙方代理方式分为单抬头代理和双抬头代理：单抬头代理是指乙方以进口货物价款、货物关税、增值税以及进口代理费向甲方开具增值税发票的代理方式；双抬头代理是指乙方向甲方提供海关进口关税专用缴款书、海关代征增值税专用缴款书和报关单的原件，由甲方自行抵扣，乙方只按所收进口代理费金额开具增值税发票给甲方的代理方式。

二、委托单及下单方式

1、甲方就每批货物编制委托单（委托单是指甲方向乙方发出的委托进口货物确认单、订单、CE、采购合同、线上下单平台订单等具有明确的货物名称、数量、单价的文件），列明每批进口货物的产品名称、规格型号、数量、进口单价、产地、装箱情况、要求的交货期等资料，每张委托单的货物不得超过______个规格型号且供应商为同一企业，甲方委托乙方代理之货物以委托单为准，并于境外供货商发货期前两个工作日交给乙方，以便乙方办理货物进口的相关手续及做好相关准备工作。

2、下单方式从甲方指定电子邮箱发至乙方的委托单等信息（不论是否经甲方盖章或甲方授权代表签字）均视为甲方真实意思表示，甲方不得以任何理由抗辩。甲方向乙方发出委托单的，视为甲方同意委托乙方代理该等进口事宜的要约；乙方应当及时以其行为或书面方式做出承诺。甲方有权通过书面方式通知乙方修改上述电子邮箱。

三、甲方的资格、责任

1、甲方声明与保证，甲方为守法合规企业，且合同伙伴必须符合贸易安全条件。

2、甲方就本协议及委托单承担其作为委托方的义务。

3、甲方应及时满足乙方的要求，向乙方提供有关业务所需的信息及资料。

4、甲方应当依照本协议约定支付代理进口货物价款、乙方代垫款项和有关费用。

5、甲方同意在乙方按其委托向供应商支付货款后，甲方不得撤销乙方向供应商接收货物并报关进口的委托，甲方不得自行或另行委托第三方向供应商接收货物。否则视为供应商未交付货物，甲方应按本协议约定承担违约责任。

6、甲方有义务配合乙方与供应商签订交货确认合同，约定经乙方支付货款给供应商的，供应商必须将货物交付给乙方，不得交付给甲方或其他第三方，否则乙方有权要求供应商返还货款。

7、甲方应保证货物产品名称、规格型号、数量、进口单价、产地、装箱情况、商品编号等有关信息的真实准确及合法，否则，乙方有权要求甲方按实际货物货值的______%支付违约金，且因此引起的一切经济及法律责任全部由甲方负责。涉嫌犯罪的，乙方有权向相关部门报案。

8、非因乙方过错导致代理进口事宜不能履行、不能完全履行、延迟履行或履行不符合约定的，甲方应偿付乙方为其垫付的费用、税金及本协议约定的进口代理费和违约金，并承担乙方因此对外承担的一切责任。

四、乙方的责任

1、乙方保证自己在其经批准的对外贸易经营范围内进行经营活动。

2、乙方应及时报告对外开展业务的进度及履行乙方义务的情况。

3、乙方有义务办理履行代理进口时所需的各种手续。

4、乙方有义务为甲方保守商业秘密，未获甲方事先书面同意，不得向任何第三人透露甲方客户及交易的情况，但根据有关政府机关或法院要求透露的不在此限。

5、因乙方原因逾期交货超过三个工作日的，甲方有权从逾期之日起每天按进口代理费的______%向乙方收取违约金；由甲方开具增值税发票给乙方。

五、代理进口货物价款、进口代理费、通关及其支付和结算

1、代理进口货物价款及具体进口货物清单、数量和单价由委托单确认。甲方提供的价款过分低于国际市场行情，有可能虚报价格的，乙方可以建议甲方调整报关价格，或要求甲方提供相关证明文件，甲方不同意调整报关价格或提供相关证明文件的，乙方可以不予办理报关事宜。

2、进口代理费、进口货物货款及税款支付结算办法由双方根据具体货物另行约定。

3、如乙方已依据本协议约定代开信用证或期票的，甲方不得以任何理由要求乙方撤销或不付款。

4、如根据本协议约定需乙方代垫货款或费用的，乙方在任何情况下均可视自身财务情况确定是否代垫及代垫金额，但需及时通知甲方。

5、甲方向乙方出具委托单时应当注明报关货币种类，乙方按委托单约定的货币种类报关后，双方应按报关时确定的货币种类及本协议约定的汇率结算，双方均不得擅自变更结算货币种类。

6、进口环节关税和增值税全部由甲方承担，包括但不仅限于海关正常开具的税单及因海关对进口商品归类和货价进行重新核定而补征的进口环节关税、增值税及滞纳金。

7、乙方开具的增值税发票只能作为乙方已向甲方交付货物的证明，不能作为甲方已付款的证明。

8、甲方逾期支付应付款项的，乙方为实现债权所支付的合理费用（包括但不仅限于律师费、诉讼费、评估费、差旅费等）均由甲方承担；乙方违约的，甲方为实现债权所支付的合理费用（包括但不仅限于律师费、诉讼费、评估费、差旅费等）均由乙方承担。甲方逾期付款超过______天的，乙方有权处理（包括但不仅限于拍卖、折价变卖等）甲方委托乙方进口的货物，并就处理货物所得价款优先受偿，甲方逾期付款超______天的，视为甲方抛弃该货物所有权。

9、甲方需按本协议约定及时支付到期款项，甲方逾期支付到期款项超过三个工作日的，乙方有权从逾期之日起每天按应付款总额的______%向甲方收取违约金；由乙方开具增值税发票给甲方。

10、非因乙方原因导致货物在乙方仓库存放超过______天的，甲方应当按乙方收费标准向乙方支付仓储费。风险提示：

建议违约责任具体明确，比如：如一方违反本合同应怎样之类的条款，尽量要避免笼统约定承担违约责任。并且，可以根据际情况来规定违约赔偿金的数额。此外，违约金的数额不应过高或过低，过高可能面临着违约诉求不被支持的风险，过低则不利于守约方，因此，建议咨询专业律师进行商榷。

六、货物运输、交付、验收以及违约责任

1、货物由乙方或乙方指定的第三方从乙方指定的境外货仓运抵乙方货仓，然后再由乙方货仓运抵甲方指定的国内目的地后将货物交付给甲方或者甲方指定的第三方。

2、除本协议另有约定交货期限外，甲方应确保供应商在乙方支付货款后______个工作日内交货完毕。供应商逾期交货的，视为甲方违约，甲方应当于______个工作日内向乙方支付与外汇货款等额的人民币款项作为保证金；同时乙方可以向供应商要求返还外汇货款，甲方不得以乙方已向供应商追偿为由对抗乙方，甲方逾期支付保证金的，乙方有权按本协议约定向甲方收取违约金。

3、境外供货商向乙方交货时，若货物外包装为原厂包装，乙方按包装箱标示以及装箱清单验收；若原厂外包装破损或有其他异样，应及时通知甲方，乙方可应甲方要求按装箱单开箱照实验收。

4、乙方交货时，货物原厂外包装完好的，乙方按原厂外包装标示及原厂装箱清单交货；若原厂外包装破损或有其他异样的，甲方可开箱清点，照实验收。

5、乙方收货时，原厂外包装完好，乙方可视为其内在货物完好，乙方凭原厂外包装完好交货的，甲方或者境外供货商不得向乙方提出异议；在原厂外包装完好的情况下，甲方或者甲方指定的第三方收货验收时发现异样的，应由甲方与境外供货商协商解决，在此情况下，乙方可提供协助。

6、货物由境外供货商交付给乙方时起直至将其交付给第三方承运人期间，货物由于乙方不当装运所遭受的损坏、灭失由乙方按进口价格赔偿直接损失。除此之外，乙方不再对甲方承担任何其它风险或损失。

7、供应商逾期交货超过______天的，乙方有权自供应商逾期交货之日起至供应商实际交付货物或返还外汇货款之日止，每天按逾期货物价款的______%向甲方收取违约金。

8、甲乙双方同意乙方交付货物时可采用电子送货单或纸质送货单，甲方工作人员在乙方的电子设备上签字确认收货，该电子送货单与纸质送货单具有同等法律效力。

七、争议的解决

1、属于境外供货商责任的货物数量及或质量索赔，乙方不承担赔偿责任，但乙方尽力协助甲方向境外供货商提出索赔，并会督促境外供货商尽速理赔。乙方因此而支出的有关费用或受到的任何损失，应由甲方给予全额赔偿。

2、双方应本着诚实信用的原则认真履行本协议项下的各项义务，及时通报有关情况和磋商解决问题的办法。出现损失的，由过错方承担责任；如属双方过错，则应根据各自的过错大小分别承担相应的责任。

3、双方同意，与本协议有关的一切纠纷应首先通过友好协商解决；协商不成的，任何一方均可向____________法院起诉。

4、乙方及其关联公司因处理本协议约定的委托事项而被提起仲裁、诉讼或行政处罚的，乙方应及时通知甲方，甲方有义务协助乙方搜集证据，并应为有关交涉提供必要的支持和方便；如上述仲裁、诉讼或行政处罚非因乙方或乙方关联公司过错所导致的，乙方或乙方关联公司因此支付任何费用（包括但不仅限于律师费、诉讼费、仲裁费、保全担保费等）或者受到任何损失，应由甲方给予全额赔偿。本合同一式两份，甲乙双方各执一份，经双方签字盖章后生效，具有相同的法律效力。甲方（盖章）：法定代表人（签字）：日期：________年____月____日乙方（盖章）：法定代表人（签字）：日期：________年____月____日

根据《民法典》有关规定，甲、乙双方经平等协商一致，达成如下协议，在履行协议的过程中，甲、乙双方应严格遵守，若有违约应按合同约定赔偿对方由此导致的经济损失。

一、合同期限

1.本合同签署有效期自________年____月____日至________年____月____日，其中前____个月为试销期。

2.合同到期后，另确定新的经销条件，乙方在同等条件下享有优先权。

二、经销产品及区域

1.甲方授权乙方经销甲方_________产品。

2.甲方授予乙方______产品的销售区域仅限____________________________。

三、产品价格

1.价格按全国统一价执行(价格表附合同)。

2.乙方严格执行合同约定产品销售价格体系，不能低于或高于合同约定价格销售。否则，甲方不予兑现销售奖励。

3.甲方保留统一调整产品价格的权力，调价提前______天通知乙方。

四、结算方式

1.经甲方财务部门确认，乙方货款到帐后，甲方组织发货。

2.如甲方更改帐号，以甲方财务部签章后的书面通知为准。

3.在未得到甲方财务部签章的书面通知，乙方不得将货款(或借款)交给或借给甲方业务人员或汇入其他账户，否则，乙方承担责任。

五、合作保证

1.乙方首批货款在本合同签定之日起____日内全额汇入甲方指定账户。否则，视乙方违约，本合同自行失效。

2.甲乙双方签定合同时，乙方向甲方交纳______万元的合同保证金，否则视乙方自动放弃合同。合同保证金利息按照同期活期存款利率计算。

六、市场操作要求

1.乙方应建立起本区域完整的销售网络，保证经销甲方的产品在经销区域内终端铺货达到：商超_________家，酒店______家，酒楼______家(附终端明细目录)，产品进入所有终端网点铺货覆盖率

第一个月应达到______%，

第二个月以后保持在_____%以上，每月建设堆头、端架的商超数量应保持在商超总数量的_____%以上，经甲方确认。

2.乙方在经销期内必须完成销售任务______________万元人民币(按实际回款额计算)，其中首批回款____________万元，月度销售比例及任务如下：

3.经销期(包括试销期和正式经销期)内乙方保证完成月度销售任务，按合同约定完成终端铺货，建设商超堆头、端架。若在合约期内乙方连续累计无法完成两个月度销售任务，或不能按合同约定完成终端铺货数量和商超堆头、端架建设数量，甲方有权取消经销商资格

4.在试销期内，乙方完成合同约定的月度任务、终端铺货率、商超堆头建设数量，则转为正式经销商，甲方发经销商确认通知函

5.乙方保证合同指定产品均在限定区域内销售，如窜区域销售，甲方不予兑现销售奖励，并根据数量乙方支付甲方__________元件--_______元件的违约金，或甲方有权取消经销商资格。

6.乙方做好售后服务并积极维护品牌形象，同时负责做好产品包装物的回收处理工作。

7.乙方不得经销与甲方产品名称、包装、风格相近的仿冒品或同类产品。否则，甲方视乙方违约，终止与乙方的合作。

七、甲方责任

1.甲方负责监督并杜绝窜货现象的发生，以确保乙方在销售区域内的合法权益。

2.乙方在销售甲方产品过程中所发生的广告媒体宣传、宣传品、促销品、推广活动等事宜，乙方应提出计划方案，经甲方审核同意后，乙方即可安排实施。

3.甲方协助乙方做好产品的售前、售中、售后服务。

4.保证提供乙方所需的货源，负责做好市场的管理、指导工作;负责提供电视、软性文章等宣传媒体资料及终端培训。

5.及时兑现合同约定的政策支持。

6.负责将产品运至乙方市场，运费由甲方承担。

八、产品验货约定 甲方货到乙方市场当日清点核实品种、规格、数量，由乙方法人代表在货运回执单上签字并加盖公章后产品验收生效，运送的产品、宣传品、促销品等物品如出现短缺或破损，乙方应在货运回执单上注明。否则，出现的一切损失由乙方负责。

九、奖励政策 参与公司经销商级别评定，兑现奖励。

十、产品调剂约定 本合同产品在发货三个月内如滞销可提出调剂，调剂产品的来回运费，运送损失及内外包装材料损失费均由乙方承担，乙方所有调换产品必须保证包装无开封、脏、损现象，不影响二次销售，否则不予退换。 十

一、双方合作前特别约定

1.乙方严格遵守国家工商、税务等有关政策、法令、法规进行商业活动，如有违反，属乙方个人行为，概与甲方无关，因此衍生的一切后果，由乙方负责。

2.乙方向甲方汇报每月库存、销货情况及下期要货计划、市场信息，乙方每次上货金额应在______________万元以上。

3.甲方每月对乙方的考核截止日为当月的____日。

4.乙方必须向甲方提供完整、准确、真实的终端明细目录，由乙方签字并加盖公章。如出现虚报、错报、漏报现象，经甲方核实后，乙方支付甲方_____元家的违约金。

5.属甲方投入进店费的终端网点，进店所有权应归甲方。 十

二、解约手续

1.在合同生效期，如乙方未能达到双方合同约定条款其中一条，甲方有权单方终止合同，以甲方经销商确认通知函为准。

2.在解约时乙方应将经销区域内的销售网点无条件交由甲方接管。

3.若双方解约，乙方市场完好无损仍有销售价值的产品，甲方按乙方进货价________%的价格回收，与甲方有关并由甲方提供的资料，乙方应无条件交回甲方。

4.解约手续办理完毕，甲方退还乙方合同保证金。 十

三、本合同未尽事宜由双方协议补充，出现争议双方协商解决，协商不成，由甲方所在地法院裁决。 甲方：_________________________乙方：__________________ 地址：_________________________地址：__________________ 电话：_________________________电话：__________________ 传真：_________________________传真：__________________实用

委托方(甲方)：__________

受托方(乙方)：__________

按照《中华人民共和国合同法》的有关规定，甲乙双方本着互惠互利的原则和相互合作与支持的宗旨，就甲方委托乙方为货物运输代理等事宜，经友好协商达成如下协议。

第一条 甲方责任和义务

1甲方最少在货物抵达前__________(船到港前三天、航班到港前24小时)通知乙方货物到达情况和提供有关文件，有关文件包括：海洋提单、空运提单、货物资料、报关和报检报验文件等，以便乙方安排换单和提前审核有关文件。

2.甲方委托乙方代理申报的进口货物，必须按照中华人民共和国海关、商品检验检疫及相关部门对于国家进口货物的有关规定，如实申报。

3.甲方根据乙方要求，负责提供下列全部或部分单据和文件：报关委托书、报检委托书;手册;正本提单、发票、箱单、合同;报关所需要进口许可证如系危险品，应提供相关文件;其他与进出口货运有关的单据和文件。

4.由于甲方或下列原因导致货物申报时间的延迟，而造成未能及时清关或货物疏港等，由甲方承担所产生的风险、责任及费用，而乙方不予承担：

(1)因买卖双方原因导致提单不能在公司正常换取(如海运费用未结清等);

(2)由于甲方未能及时提供进口报关所需的全部资料;

(3)因甲方所提供的报关资料失实，而导致的延迟;

(4)在清关过程中由于海关等相关部门要求，需要补充或修改有关单证及相关说明资料，而甲方未能及时提供;

(5)遇到法定节假日或有关部门不能正常办公;

(6)因港口要求和规定而必须输港的货物;

(7)其他甲方及不可抗拒原因。

5.由于非乙方原因造成滞箱费、污箱费、修箱费等费用和责任，由甲方承担，乙方尽量协助甲方协商解决。

第二条 乙方责任和义务

1.乙方应及时、合理安排甲方所委托进口货物的换单、申报、运输等事宜。

2.乙方应及时通知甲方有关报关进度、预计送货时间，以便甲方合理安排仓库装卸。

3.乙方应积极协助甲方解决在报关过程中出现的各种问题和状况，包括文件的提供、解释、说明等工作。

4.乙方应以最快的速度完成清关工作，并按甲方的指示将货物送到指定地点。

第三条 费用结算

1.按照海关的有关规定，甲方应自行向海关缴付货物进口关税及增值税，特殊情况可以委托乙方代缴，但乙方不予以垫付。

2.甲方应自行交付到付运费(海运费和THC、空运费)，特殊情况可以委托乙方代付，但乙方不予以垫付。若由于甲方不能提供进出口货物单据或用以缴纳进口关税及增值税的限额支票而产生的相关费用，如滞报金、滞箱费、港口费、滞纳金、转栈费等经甲方确认后由甲方。

3.如因各种原因乙方无法收到甲方应付之费用，则乙方有权暂扣甲方委托乙方所管理的货物或属于甲方的业务文件，所造成的风险、责任及费用，乙方不予承担。

4.非甲方原因产生的特殊费用和责任，甲方不予以承担。

5.附《进口货物运输费用报价》。

第四条 结算方式

乙方应于每月__________日前将本月账目清单(如实报实销则提供发票)送交甲方，甲接到账目清单核对无误后通知乙方开具正式发票，发票开具后__________日内付款。

第五条 货物灭损

甲方未办理货物申明价值的，由于承运人或乙方的原因造成货物灭损的，按货物实际损失赔偿，但赔偿额最高按灭损货物毛重每公斤人民币__________元(国内航线)/国际__________美元(US$)(国际航线)计算。

第六条 检验

运输过程中，允许托运单上甲方记载的货物件数、重量、体积与实际托运的货物存在略微差异。货物准确的件数、重量、体积以乙方接收货物时乙方的检验为准。如果甲方对乙方的检验结果存在异议，可书面向乙方申请双方联合检验。如果联合检验的结果

第七条 担保

为了顺利执行本协议，按时结清账目，乙方应以人民币__________元或每张货运单__________元提供保证金或等值的房地产抵押等甲方认为满意的担保。

第八条 转让

本协议所规定的乙方的权利和其他职责，未经甲方的书面同意，乙方不得将其全部或部分转让，或者授权给任何第三方。

第九条 违约责任

1.乙方未依本协议向甲方支付费用，或支付费用不完整的，乙方必须从支付期满__________日起，按应付款向甲方每日支付__________元违约金。

2.乙方无正当理由__________天不履行某一个月的全部费用或所欠费用超过全部应付费用的时，甲方可以解除协议并按上款要求违约金。

3.甲乙双方违反本协议造成对方损失的，按违约时的实际损失赔偿对方。

第十条 抵消

依据法律或本协议约定乙方应支付甲方的违约金或其他款项将被视为甲方的可向乙方主张的债权，对该债权的实现双方同意甲方可以主张从甲方应支付乙方的本协议下的款项或其他甲方应支付乙方的款项中直接扣除直至抵消完毕，不足的部分乙方当然同意予以补足。甲方没有从应支付乙方的款项中扣除的并不应该视为甲方对主张该违约金或款项的放弃。

第十一条 解除

1.甲方未及时、全面、正确履行合同约定之义务的，乙方将书面催告甲方予以正确履行，甲方在乙方催告后__________日内仍不能整改到位的，乙方将有权解除合同。但该合同解除的权利乙方在__________日内未向甲方主张的，则该权利消灭。

2.若合同一方不能清偿到期债务或因其他原因进入破产程序，则另一方取得在书面通知对方后即解除合同的权利。甲方因进入经营困难的境地，使履行合同成为一种不可能或一种沉重的负担，则乙方应许可甲方有权解除合同。

3.为对等之目的，乙方未及时、全面、正确履行合同约定之义务的，甲方将书面催告乙方予以正确履行，乙方在甲方催告后__________日内仍不能整改到位的，甲方将有

4.合同解除后甲方提供给乙方的相关单据和文件乙方应当及时返还甲方，不得未经甲方同意擅自留存、复制。

5.尽管有上述之约定，在合同解除后若乙方尚有甲方的业务正在进行的，乙方仍应当妥善予以完成，由此发生的费用甲方当然将按照本协议的收费标准向乙方支付相关费用。若因乙方违反本款的约定导致甲方受有损失的，则乙方应当负责赔偿。

第十二条 声明及保证

甲方：

1.甲方为一家依法设立并合法存续的企业，有权签署并有能力履行本合同。

2.甲方签署和履行本合同所需的一切手续均已办妥并合法有效。

3.在签署本合同时，任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对甲方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.甲方为签署本合同所需的内部授权程序均已完成，本合同的签署人是甲方的法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

乙方：

1.乙方为一家依法设立并合法存续的企业，有权签署并有能力履行本合同。

2.乙方签署和履行本合同所需的一切手续均已办妥并合法有效。

3.在签署本合同时，任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对乙方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.乙方为签署本合同所需的内部授权程序均已完成，本合同的签署人是乙方的法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

第十三条 保密

双方保证对从另一方取得且无法自公开渠道获得的商业秘密(技术信息、经营信息及其他商业秘密)予以保密。未经该商业秘密的原提供方同意，一方不得向任何第三方泄露该商业秘密的全部或部分内容。但法律、法规另有规定或双方另有约定的除外。保密期限为__________年。

一方违反上述保密义务的，应承担相应的违约责任并赔偿由此造成的损失。

第十四条 不可抗力

本合同所称不可抗力是指不能预见、不能克服、不能避免并对一方当事人造成重大影响的客观事件，包括但不限于自然灾害如洪水、地震、火灾和风暴等以及社会事件如

如因不可抗力事件的发生导致合同无法履行时，遇不可抗力的一方应立即将事故情况书面告知另一方，并应在__________天内，提供事故详情及合同不能履行或者需要延期履行的书面资料，双方认可后协商终止合同或暂时延迟合同的履行。

第十五条 通知

1.根据本合同需要发出的全部通知以及双方的文件往来及与本合同有关的通知和要求等，必须用书面形式，可釆用__________(书信、传真、电报、当面送交等方式)传递。以上方式无法送达的，方可釆取公告送达的方式。

2.各方通讯地址如下:__________。

3.一方变更通知或通讯地址，应自变更之日起__________日内，以书面形式通知对方;否则，由未通知方承担由此而引起的相应责任。

第十六条 争议的处理

1.本合同受__________国法律管辖并按其进行解释。

2.本合同在履行过程中发生的争议，由双方当事人协商解决，也可由有关部门调解;协商或调解不成的，按下列第__________种方式解决：

(1)提交__________仲裁委员会仲裁;

(2)依法向人民法院起诉。

第十七条 解释

本合同的理解与解释应依据合同目的和文本原义进行，本合同的标题仅是为了阅读方便而设，不应影响本合同的解释。

第十八条 补充与附件

本合同未尽事宜，依照有关法律、法规执行，法律、法规未作规定的，甲乙双方可以达成书面补充协议。本合同的附件和补充合同均为本合同不可分割的组成部分，与本合同具有同等的法律效力。

第十九条 合同效力

本合同自双方或双方法定代表人或其授权代表人签字并加盖公章之日起生效。有效期为______年，自___年___月____日至___年___月___日。本合同正本一式__________份，双方各执__________份，具有同等法律效力;合同副本__________份，送__________留存一份。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

买方： 合同编号：

卖方： 签订地点：

签订时间：

第一条：标的物名称、规格型号、厂家、数量、金额：

序号名称规格型号单位数量单价(元)总价(元)生产厂家备注

1

2

3

4

5

6

合计大写人民币：

注：

1、以上价格含16%增值税发票,含运费。

第二条、质量要求技术标准、卖方对质量负责的条件和期限：按合同要求和国家相关标准执行，质保期为168后计算12个月或货到之日起18个月(二者以先到为准)。质保期内由于标的物质量问题卖方无偿负责维修和更换配件，买方使用不当造成标的物损坏由买方负责，卖方有偿维修服务和更换。质保期结束标的物正常易损件的磨损且不影响其性能大的改变均为合格，否则由卖方负责维修更换易损件。有异议质保期到三日内提出。

第三条、交货时间、地点及运费负担：合同生效卖方收到买方的预付款后 天具备发货条件，发货款到账后 天到货。卖方代办托运至买方指定的施工现场，收货地址： ，运费卖方负担。

第四条、油漆颜色、包装标准、包装物的供应与回收：泵及电机颜色 泵及电机油漆颜色：按照厂家的出厂色，整车汽车送货标的物不包装。零担发运按标准包装，包装物不回收。买方在处理废弃包装物时，应根据国家相关环保法律法规要求，做出妥善处理，不得污染环境。

第五条、验收标准、方法及提出异议期限：按合同、技术条款及国家相关标准，货到一星期内提出异议。

第六条、本合同约定为所有权保留的买卖。即买方未履行完付款义务的，标的物所有权仍属于卖方所有;但标的物的保管、毁损、灭失的责任和风险自交付时起由买方全部承担。

第七条、付款方式：银行汇款或银行承兑汇票。

合同签订后付预付款30%合同生效;发货前买方向卖方支付70%作为发货款，卖方提供13%的全额增值税专用发票。

第八条、本合同解除的条件：不可抗力。

第九条、违约责任：双方协商解决或按《民法典》相关条款执行。

第十条、解决合同纠纷的方式：本合同履行中发生争议，双方协商解决，协商不成，可向原告方住所地人民法院起诉。

第十一条、其它约定事项：

1、合同生效后一星期内卖方须提供完所有标的物的安装尺寸图给买方。

2、货到买方安装调试时卖方应派技术人员现场指导买方安装和调试，并对买方维修运行人员进行培训。

3、卖方延期交货按合同标的物总价每天5‰支付违约金，买方延期付款按合同标的物总价每天5‰支付违约金给卖方。

4、本合同双方签字盖章传真件/扫描件生效。

卖 方

单位名称(章)：

单位地址：

法定代表人：

委托代理人：

电 话：

传 真：

开户银行：

帐 号：

税 号：

邮政编码：买 方

单位名称(章)：

单位地址：

法定代表人：

委托代理人：

电 话：

传 真：

开户银行：

帐 号：

税 号：

邮政编码：

注：直至合同执行完毕为止

甲方：________________有限公司 (以下简称：甲方)

乙方： (以下简称：乙方)

为规范甲、乙双方在施工(维修)业务交往中的生产安全、消防安全、职业健康和环境保护的日常管理，确保施工(维修)过程中的安全，保障甲、乙双方单位和人员的人身安全及财产安全，防止减少安全、火灾职业危害、环境污染等意外事故的发生，依据《XX市企业安全生产主体责任暂行规定》，根椐“谁承揽施工(维修)项目，谁负责”的原则，按照双方签约的 合同(协议书)，特签订生产安全、消防安全、职业健康和环境保护协议如下：

一.甲方权利和义务：

1.必须对乙方安全资质进行审查，不得将项目委托给不具备承揽项目相应资质的单位。

2.有权对乙方违反甲方有关安全规定的行为给予处罚。

3.负责向乙方交底施工(维修)现场环境和安全生产规章要求，并派专人监督实施。

4.负责指定提供施工(维修)现场必要的水、电、气接口等。乙方无权私自占用未经甲方同意的场所和非指定水、电、气接口处。

5.甲方委派的监护人员，必须全面考虑因施工(维修)可能造成的影响，负责向乙方明确现场施工(维修)条件和作业要求。要求乙方制订出具体的施工(维修)措施，并通知到相关部门、岗位和人员，确保措施落实到位。

6.根椐乙方申请，协助做好停电、停水、停气等相关工作，严格监督执行停(送)电、水、气规定，否则不准施工(维修)。

7.根椐乙方申请，在可能提供设备、工器具借交乙方使用时，双方要认真确认设备、工器具的安全状况，交接后发生的问题，由乙方负责。

8、甲方应根据施工(维修)项目等需要和乙方要求，配备相关人员配合施工(维修)。

二、乙方的权利和义务：

1、承揽施工(维修)项目方必须主动与甲方签订安全协议，并出具与承揽施工(维修)项目相应的资质证明，严格履行协议的条款内容，做到不签订安全协议不施工(维修)，施工(维修)前必须制订有针对性的、可行的安全措施，做到无安全措施、措施不落实，不施工(维修)。

2、施工(维修)人员进入施工场所，必须穿戴劳动防护用品，遵守甲方的安全规定，严格执行本项目安全规定和岗位安全操作规程。

3、施工(维修)所用设备、器具、材料等物品，应按甲方要求堆放整齐，不准阻塞安全通道，施工(维修)人员按指定线路进出施工(维修)场所，不得擅自进入其他区域。

4、用电、用气、用水事先办理申请手续，所用设备、器具、电具、劳动防护用品等应符合国家安全规定，借用甲方设备、器具等办理交接手续，确认所借物件安全可靠后方可借用。

5、电、气焊作业事前办理申请手续，征得甲方批准后，方能进行电、气焊作业，作业时严格遵守电、气焊操作规程。

6、因施工(维修)需要拆除设备的安全装置、安全设施，必须办理申请手续，征得甲方同意后，并采取可靠的安全防护措施，方能临时拆除。施工(维修)完毕时，立即恢复被拆除的安全装置和安全设施，并经甲方验收确认。

7、施工(维修)场所未经确认的管线一律视为有电、有压力在运行设施。

未经甲方同意，不得使用甲方的起重、运输设备，主动避让施工(维修)场所起吊物件和厂内机动车。不准在现场吃饭休息。

8、高空作业时应设警戒区域和标识，必须有现场监护人员，严禁高空抛物、掉物，作业完毕应清理遗留在高处的物品。

9、施工(维修)项目完成后，在调试、检查确认正常，拆除所用临时管线，清理施工(维修)所用设备、器具、悬浮物后，办理交接验收确认工作。

10、施工(维修)期间发生的安全、消防、职业健康、环保事故，施工人员应立即报告甲、乙双方。

凡非因甲方原因造成的事故，由乙方负责处理和上报，并由乙方承担全部责任和后果(包括甲、乙双方或第三方财产或人身损害)。因甲方原因造成的事故，由乙方负责处理，甲方作经济赔偿。

三、注意事项：

1、甲、乙双方签订施工(维修)合同时，本协议作为合同附件，同时生效、失效。

2、本协议未尽事宜，应有双方共同协商，做出补充规定，补充规定与本协议具有同等效力。此协议加盖公章生效。

甲方：____________________有限公司 乙方：________________

年 月 日 年 月 日

甲方：

乙方：

为了推动xx庄园大米原浆酒系列白酒代理的销售，并建立良好规范的市场秩序，甲乙双方本着平等、自愿、诚实、信任、互利互惠的原则，经友好协商，就乙方作为甲方生产的五星系列白酒代理商及其相关事宜，达成如下协议：

一、乙方必须具备的条件

1、乙方应当是经关机构注册和许可的能够完成销售白酒代理任务的单位;

2、具备一定的白酒销售网络;

3、具备履行本协议有关条款的资金能力并在本协议生效时向甲方一次性交纳许可费万元;

4、乙方注册经营的项目范围必须包括其所代理的甲方产品;

5、有销售白酒的专职人员并具备销售甲方产品的业务能力;

6、严格遵守甲方的价格政策及本协议有关规定。

二、代理事项

1、代理商级别：市代理/县代理;

2、代理范围：市县，乙方不得超出上述代理区域进行销售活动。因乙方违反此条款而产生的经济和法律上的责任，由乙方负责;

3、代理期限：从年月日至年月日。双方可于协议期满前30日内续签，否则本协议自行终止;

4、首期进货款：乙方每次向甲方进货货款总额不得少于(大写)元，并承诺遵守所代理产品的市场规则。乙方预付定金，在甲方首次收到不低于酒箱货款后，发出第一批次白酒，价值元(按提货价计);在甲方收到第二批次不低于酒壹仟箱货款后，发出第二批次白酒，定金在第二批次货款中抵扣货款;

5、甲方授权乙方代理的甲方产品为“冰峪庄园大米原浆酒系列白酒”;

6、甲乙双方的任何一方对另一方的商业行为和法律行为及经营风险不承担责任。

三、甲方的责任、权利和义务

1、甲方为乙方提供销售所需的白酒生产许可等资料;

2、支持乙方最大限度占领区域市场;

3、甲方有权根据本协议的有关规定，监督、检查乙方的协议执行情况;

4、当乙方的市场行为违反甲方规定时，甲方有权对乙方实施劝说、警告、处罚或停止供货并取消乙方的代理商资格;

5、甲方根据自己的发展情况向乙方通报新产品的开发开发进展情况等有关信息，以便乙方及时调整销售方案;

6、甲方有义务及时向乙方通报产品白酒价格的调整情况;

7、甲方不得干预乙方正常的销售行为。

四、乙方的责任、权利和义务

1、在得到甲方授权后，乙方有权以甲方“白酒代理商”的名义从事代理协议规定的与代理产品相关的甲方产品有关的合法商业活动;

2、乙方为其所出售产品的第一售后责任人，并独立承担非因产品质量原因所引起的售后责任;

3、乙方必须明确设立专职人员经营所代理的甲方产品;

4、乙方有义务收集当地有关信息，并及时反馈给甲方;

5、在实现实际销售行为后，乙方有责任将用户信息及时反馈给甲方，以便甲方对用户的售后服务情况进行记录;

6、乙方不得从非法渠道获得甲方产品进行销售，否则一经发现将按违约处理;

7、乙方在媒体上公示的甲方产品价格不得低于甲方规定的全国统一零售价格;不得违反甲方产品的体系;乙方在市场促销活动中，不得发布低于统一零售价7折的价格信息;若有违反，甲方有权取消乙方奖励及相关市场支持，情节严重者，甲方有权终止乙方的代理授权。

五、商务体系

1、订货：

(1)乙方订购甲方产品前，应以电话、传真、电子邮件等形式向甲方发出订购单，明确所需产品的品名、规格、数量等情况。

(2)甲方在收到乙方订货总价款的%预付款后立即组织生产，在收到全部货款后方可向乙方发货。

2、发货

(1)甲方实行款到发货制度。甲方承诺在收到乙方的货款后，在8个工作日内安排发货。

(2)乙方应当自备运输工具从甲方指定地点自提货物并承担运输费用，在乙方确认货物品种、数量、质量、规格后即承担货物灭失、毁损等风险责任，

3、退货

(1)乙方向甲方所购买的系列白酒除因质量问题外不得提出退货。

(2)如果甲方售出的产品出现质量问题应当予以等价调换，或者以原价向乙方退回货款，由此造成的运输费用及运输风险等由甲方承担。

4、市场公关及广告宣传

(1)乙方有义务进行当地市场的市场开拓和广告宣传工作。

(2)乙方有义务维护甲方及甲方其他代理商的形象;乙方不得以甲方“总(独家)代理”等具有排它性的名义进行广告宣传及其他商业活动，不得以任何形式损害甲方的利益;

(3)乙方如举办大型公关活动，需要甲方对其提供技术资料时，应提前15天向甲方提出书面申请;

(4)乙方需把广告合同传至甲方处，待甲方确认后，按一定比例进行支持。

六、保密条款

1、甲乙双方必须对业务往来中的任何重大商情事务对第三方严格保密;

2、甲乙双方因任意一方的行为对另一方造成名誉、经济等损失，由责任方承担相应责任;

七、法律效力

1、本协议一式两份，甲、乙双方各执一份，经双方签字盖章后生效;

2、变更本协议条款中的任何内容，需有双方签字的正式书面更改件;

3、发生以下任意情况时，可提前解除本代理协议：

(1)双方协议同意时;

(2)协议的一方破产被解散或被撤消时;

(3)协议的一方有损害对方的形象和利益的行为时;

(4)协议的一方违反协议时;

(5)发生不可抗力事故使协议无法继续履行时;

(6)《合同法》规定的其他情况时。

4、本协议期满后自行终止，如双方有意继续合作可以续签;

5、甲乙双方对本协议有修改、更正、补充的，应另行签订补充规定协议，补充协议与本合同具有同等法律效力;

甲方(盖章)：

签约代表：

签约日期：

乙方(盖章)：

签约代表：

甲方：

乙方：--公司

根据中华人民共和国《合同法》及有关公路道路运输服务管理规定，为确保公路运输服务质量，维护双方权益，规范相互合作行为，甲乙双方经过充分协商，就甲方产品运输服务事项达成以下条款，以便双方共同信守。

第一条：甲、乙双方基本合作义务：

1、甲方委托乙方承运公路运输业务，托运货物主要为______及其他_____等;甲方按照单据实际数量予以结算，乙方应在运输能力、运输时间及运输安全可靠性等方面满足甲方的要求，并根据甲方的运量快速配备运输工具，确保运输服务质量;

2、乙方在接到甲方运输业务委托时，应严格按照甲方的委托事项按时按质按量完成道路运输任务，并对甲方的运输业务全过程安全负责;

3、运输价格和运输时间按双方确认的合同附件《运输时间价格表》内容执行，合同期限内不得单方面随意改变运输价格，包括门对门的一切费用，否则视为违约;

第二条：乙方须具备的资质条件：

1、具有独立法人资格及中华人民共和国工商行政主管部门核发的营业执照

2、具有中华人民共和国税务主管部门核发的税务登记证照及财务结算凭证;

3、具有中华人民共和国交通主管部门核发的道路运输经营许可证;

4、营业执照的注册资金不得少于100万元的;

5、具有________年以上公路运输和配送经验，有固定的经营场所和必备的通讯设施;

6、具有相应的运输能力和必备的信息监控手段，有完整的服务质量保证体系;

第三条：风险保证金

1、乙方承担货物风险责任：在货车的挡板处接受货物时起，至货物到达卸货地卸货完毕止。

2、乙方同意在签署合同时，向甲方一次性交纳人民币__万元风险保证金，该保证金不计息，如货物在乙方承运期间完好无损、保持原样，甲方在合同期满或终止后30天内返回给乙方。若继续合作，风险金直接转入下一次合作合同。如因乙方责任造成甲方损失，甲方则按销售发票价格和因乙方原因甲方客户对甲方的索赔金额从保证金中扣除，乙方拥有受损货物的所有权，乙方在不影响甲方销售市场和甲方公司及产品声誉的产前提下处理受损货物。

第四条：合同期限

本合同自 ________年____月____日 至 ________年____月____日止。

第四条：运输地点、价格及时间

见本协议附件：《运输价格表》

第五条：运输服务管理要求及事项约定

1、甲方有运输任务时提前一天以电话或传真方式通知乙方固定的联系人确认运输委托内容，包括要求车辆到达甲方工厂的时间日期，要求承运的货物数量，建议使用的车型、卸货____市等。乙方接到甲方发货任务通知时起，必须在一小时内给予答复并明确告知车辆号码、司机姓名、电话等，并保证车辆按时到厂装车，否则，甲方有权另行选择承运单位;

2、乙方提供的运输车辆必须符合甲方的装载要求;车况良好，货厢内壁无凹凸不平之处，无水渍、油渍，干燥清洁、无渗漏、无毒、无异味及其他污染物，敞车必须配备蓬布、绳索及捆绑用的竹片等保护材料;

3、乙方必须听从甲方现场管理人员的指挥，遵守甲方工厂仓库的各项规章制度，不准与甲方发货人员发生争吵、打架、随地吐痰、乱扔垃圾等行为;

4、乙方到达甲方指定提货地点时，司机或提货人员必须携带有效证件，经过甲方许可后驶入指定区域等待装车，甲乙双方在货车的挡板处交接货物、乙方须对所承运的货物做好清点工作，并按甲方要求办理签收及发货手续，双方办理完发货手续后，货物的数量和安全以及完好性有出入的，均由乙方承担所有损失;

5、甲方发货清单为一式五份，经双方清点货物数目签字确认无误后，甲方留存一份，乙方所执四份货物清单，一份交收货人作为收货凭证。其余三份交收货人签字盖章后返回甲方，作为有效运输结算凭证;

6、捆绑绳索和产品软性包装箱之间必须垫有木板片等保护材料，以确保产品不会因为捆扎而变形，凡因装车后任何因素导致甲方货物失落破损的，一切损失由乙方承担;

7、自甲方货物装上乙方指派车辆后，其货物保管之责随之转到乙方，乙方在运输途中发生货物丢失或损毁、污染、被雨淋湿或受潮、包括整车被盗的均由乙方承担赔偿责任;保险事宜由乙方自行承担;甲方有责任协助提供乙方理赔所需的相关材料;

8、乙方承运甲方货物时，应在甲方指定的时间内安全送达甲方指定的客户收货地，乙方单方面延迟承运时间等原因造成甲方客户拒收或退货，造成甲方的损失均由乙方承担，甲方有权终止合同并追究乙方的违约责任。

9、货到客户处，如发生找不到收货人、客户拒收等异常情况，乙方应及时联系甲方运输负责人解决，乙方不得擅自卸货或将货物拉回仓库。没有甲方的书面单据认可，乙方不得随意从甲方客户处拉回货物，对于乙方擅自拉回的货物甲方有权拒收，且无论甲方是否收货，由此而产生的运输等费用甲方不予结算;

10、货到甲方客户处，发生部分货物损坏、短少的，由收货人将破损情况写在送货单上，并注明是否收下，双方签字确认;甲方与乙方协商处理破损赔偿，并由甲方决定是否将货物拉回至甲方仓库，所有返回货物拉回仓库后必须通知甲方仓库验收并由甲方仓库出具收货证明;

1、如发生不可抗力因素或交通事故，预计不能按时到达的，乙方应立即电话通知甲方并说明情况，以便甲方及时与客户取得联系谅解和采取相应的补救措施。

2、对于乙方接触到甲方客户的各种商业信息或运输业务，乙方不得透露，一经发现，甲方有权终止合同，造成损失的，甲方将依法追究乙方的责任;

甲方：乙方：日期

一、法律、法规规定应交纳的房产租赁相关的税费由甲方支付。

二、甲方同意自交房之日起一个月为免租期(即免租金期)，本合同条款同样适用于免租期。

三、租赁期间，甲方如未经乙方书面同意即对该房屋予以转让、抵押、出典，则乙方有权单方面解除本合同，并由甲方向乙方支付违约金人民币×××元。

四、房屋修缮责任

1、在租赁期限内，甲方应保证出租房屋的使用安全。乙方应爱护并合理使用其所承租的该房屋及其附属设施。如乙方因使用不当造成房屋或设施损坏的，乙方应立即负责修复或予以经济赔偿。

2、除房屋内已有装修和设施外，乙方因使用需要，在不影响房屋主体结构的前提下，可以对承租房屋进行装修，装修费用由乙方承担。按规定应向有关部门(包括该房屋物业管理机构)办理申报手续的，须办妥有关手续后，方可进行。

3、该房屋的维修责任除双方在本合同和本合同补充条款中约定的外，均由甲方负责。

4、甲方维修房屋及其附属设施，应提前七天书面通知乙方，乙方应积极协助和配合。

5、如因不可抗力原因，导致房屋损坏或造成乙方损失的，双方互不承担责任。

五、转租的约定

1、双方约定，乙方在租赁期限内，可将承租的该房屋部分或全部转租给他人。

2、乙方转租该房屋，订立的转租合同应符合以下规定：

(1)转租合同的终止日期不得超过本合同规定的终止日期;

(2)转租期间，乙方除可享有并承担转租合同规定的权利和义务外，还应继续履行本合同规定的义务

(3)转租期间，本合同发生变更、解除或终止时，转租合同也应随之相应变更、解除或终止。

六、变更和解除本合同的条件

1、在租赁期限内，非下列情况之一的，不得变更或者解除本合同：

(1)甲方或乙方因有特殊原因，经双方协商一致，同意甲方提前收回或乙方提前退交部分或者全部该房屋的;

(2)因出现非甲方能及的情况，使该房屋设施的正常运行、或水、或电、或煤等正常供应中断，且中断期一次超过二天，乙方认为严重影响正常使用房屋的;

(3)因不可抗力因素致使该房屋及其附属设施损坏，本合同不能继续履行的;

2、变更或解除本合同的，要求变更或解除合同的一方应主动向另一方提出。因变更或解除本合同，使一方遭受损失的，除可依法免除责任的外，应由另一方负责赔偿。

七、乙方的违约责任

1、在租赁期内，乙方有下列行为之一的，甲方有权终止本合同，收回该房屋，由此而造成甲方损失的，乙方应予以赔偿;

(1)擅自改变本合同规定的租赁用途，或利用该房屋进行违法违章活动的;

(2)拖欠租金累计达六月以上的;

2、在租赁期限内，乙方未经甲方同意，中途擅自退租的，预付租金不退;若预付租金不足抵付甲方损失的，乙方还应负责赔偿。

3、租赁期满，乙方应如期交还该房屋。如乙方逾期归还，则每逾期一天应向甲方支付原日租金二倍的违约金。

八、甲方的违约责任

1、甲方未按本合同约定的时间，交付该房屋供乙方使用的，每逾期一天，甲方应按月租金的10%向乙方偿付违约金。逾期超过15天，则视甲方不履行本

2、在租赁期限内，因甲方不及时履行本合同约定的维修、养护责任，致使该房屋发生损坏，造成乙方财产损失或人身伤害的，甲方应承担赔偿责任。

3、在租赁期限内，甲方擅自解除本合同，提前收回该房屋的，甲方应按月租金的二倍向乙方支付违约金，若支付的违约金不足抵付乙方损失的，甲方还应负责赔偿。

4、本合同经甲、乙双方签署后，甲方未按规定向房地产交易管理部门办理登记、领取《房屋租赁证》的，由甲方承担一切责任。

九、本合同自甲、乙双方签署之日起(公证之日起)的15天内，甲方应负责代表双方当事人按本市有关规定，向房地产交易管理部门办理登记。

十、本合同经登记、取得《房屋租赁证》后，方可生效。本合同生效后，凡变更、终止本合同的，甲方应负责代表双方当事人在本合同变更、终止之日起的15天内，向原登记机关办理变更、终止登记手续。

十一、甲、乙双方在签署本合同时，具有完全民事行为能力，对各自的权利、义务、责任清楚明白，并愿按合同规定严格执行。

十二、甲、乙双方一致同意，本合同补充条款及附件均为本合同不可分割的一部分,本合同及其补充条款和附件内空格部分填写的文字与铅印文字具有同等效力,补充条款系针对本合同中未作约定或约定不清的事项订立，本合同中与补充条款不一致的内容，以补充条款为准。

甲方：乙方：年月日：

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

甲方：

乙方：

甲、乙双方本着公平、公正的原则，就府谷京府煤化脱硫工程所需板材，制定如下协议：

1、 乙方按甲方要求供货，具体要求如下：

2、乙方按甲方要求送货至府工程现场，以上报价已包含装车、运费等服务费，

3、乙方货运至现场后，由甲方负责卸货。

4、乙方负责提供板材的出厂合格证和材质证明文件。

5、供货日期：合同签定后，四天内送货上门。

6、乙方运输货物途中出现任何问题，由乙方全部负责。

7、付款方式：合同签定后预付订金拾万元，其余部分待全部货物运到现场后全部付清。协议所签的数量为大致数量，双方以实际运到现场的板材数量结算。

8、板材质量应符合国家标准，如有不合格，乙方应承担全部责任。

9、 本合同一式四份，甲、乙双方各执两份。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

卖方：(以下简称甲方)法定代表人：

地买址：方：(以下简称乙方)法定代表人：

地址：

根据《中华人民共和国合同法》，甲、乙双方经友好协商，同意签订本合同，并就如下条款达成一致：

1.货物：

1.1乙方同意同甲方购买，且甲方同意向乙方出售_________(以下简称合同货物)用于乙方项目。将由甲方提供的合同设备的内容详见合同附件一(附件一中在列出货物外称的同时也请列出分项价格)。

1.2甲方负责合同货物的各项工作，由乙方提供必要配合。

1.3双方同意附件中各项条款为合同不可分割的部分，若附件与合同正文有任何不一致，以合同正文为准。

2.价格

2.1合同货物的价格(以下称为：合同总价)为：_________，价格清单详见

附件一。

2.2上述合同总价是固定的。

3.装运

3.1装运时间：3.2装运地：

3.3目的地：

3.4货运方式：4.付款条款

合同第2.1条确定的合同总价由乙方向甲方以如下方式支付：

4.1预付款：在本合同生效后5个工作日内，乙方支付甲方合同总价%的款项，即人民币发票。

4.2交货款：在合同货物交货后5个工作日内，乙方支付甲方合同总价%的款项，即人民币元。甲方同时提供乙方同等金额的资金往来发票。

4.3验收款：在合同货物验收后5个工作日内，乙方支付甲方合同总价%的款项，即人民币元。甲方同时提供乙方同等金额的资金往来发票。

5.合同设备的交货

5.1所有合同货物应在合同正式生效后_________周内，(此周应为最晚交货期)，由甲方负责运至交货地点。交货地点为的导有权及风险在卖方将货物交至承运人后转移至买方。

5.2甲方应于交货日14日之前，通过EMS或传真的方式通知乙方，通知内容包括合同号、合同货物的名称、数量、估计总重量与总体积，以及预计交货日期。乙方在收到甲方通知后，应尽快向乙方确认交货地点与交货日期。

6.合同货物的检验

5.1合同货物的检验应在货物运至交货地点后_________日内在进行。双方应指派代表参加检验。

5.2设备开箱检验合格后，双方签署验货合格证书。

5.3如双方认可的合同货物的小缺陷，并不影响货物性能，双方仍然签署验货合格证书，但甲方应立即采取措施修复缺陷。

5.4如果在联合开箱检验中发现货物有任何缺陷，缺陷或与合同规定不符，双

方代表将签署一份详细报告，该报告将作为乙方要求甲方进行更换，修理或补充发货的有效证据。如果确认为甲方责任，甲方应自费取得补充或替换设备。如果确认为乙方责任，甲方应在收到乙方的通知后尽快向乙方补充或替换设备。

7.不可抗力

7.1如果双方中的任何一方因为不可抗力，如：战争、火灾、台风、洪水、地震或其他双方共计为不属于不可抗力的原因而被迫停止或推迟合同的执行，则合同执行相应延迟，延迟的时间等于不可抗力发生作用的时间。

7.2受影响的一方应将不可抗力的发生尽快通过EMS或传真通知另一方。

7.3受影响的一方应在不可抗力终止或被排除后尽快通过EMS或传真通知另一方，并通过航空挂号通知另一方不可抗力已终结或排除。

8.保证与赔偿

8.1甲方保证其向乙方提供的货物是全新并未使用过的。

8.2甲方所提供的合同货物的免费保修期与原厂商提供的保修相同，详见附件。

8.3保修期内，甲方在收到乙方运于至指定地点(费用由买方负担)的有缺陷货物后，应尽快将更换货物自费运至乙方。

8.4如果因甲方原因不能按照合同第四条的要求按时交货，乙方有权以如下方式要求甲方赔偿损失：从迟交货第三周起每周按迟交货物总价的0.5%(百分之零点五)计，不足一周的时间计为一周。上述赔偿总额不超过合同总价的5%(百分之五)。上述赔偿不能解除乙方交货的责任。赔偿金的支付将被认为已足额补偿甲方的全部损失(包括因迟交货甲方可能向乙方提出的间接损失)。

8.5如果乙方未按合同第四条规定的内容按时支付合同款。乙方应向甲方支付滞纳金。滞纳金支付方式为：从规定的付款日次日起，按应付未付合同款额以每日0.5‰(万分之零点五)计算滞纳金，滞纳金总额不超过本合同总额的5%。

8.6如果由于非甲方原因造成合同执行延迟，则交货周期相应顺延。

9.仲裁条款

9.1所有与合同及合同执行有关的争议将通过双方友好协商解决，如果不能通过友好协商解决，则将该争议提交_________仲裁委员会仲裁。

9.2仲裁裁定是终局的，对双方均有约束力。任何一方不得向法院或其他机构申请改变仲裁裁定。

9.3仲裁费用由败方承担。

9.4仲裁进行过程中，双方将继续执行合同，但仲裁部分除外。

10.合同的生效、解除和终止

10.1本合同签约双方授权代表签字、盖条日期，即本合同的生效日期。 10.2如果发生以下情况，可以视为合同解除或终止：

(1)一方进入解体或倒闭阶段;

(2)一方被判为破产或其它原因致使资不抵债;

(3)本合同已有效、全部得到履行;

(4)双方共同同意提前解除合同;

(5)按仲裁机构的裁决，合同解除或终止。

11.其它

11.1本合同一式二份，双方各执一份。本合同列出的附件是本合同不可分割的组成部分，与本合同具有同等的法律效力。

11.2对本合同条款的任何修改、变更或增减，须经双方授权代表签署书面文件，成为本合同的补充文件，具有同等法律效力。

11.3任一方均不得向第三方公开透露合同内容，除非事先征得对方的同意。但是，如需将合同提交政府有关部门批准则不需对方事先同意。

11.4未尽事宜由双方另行协商决定。

12.附件

12.1附件一：合同货物清单及价格(略)

12.2附件二：原厂商提供的主要部件保修期

甲方(卖方)(公章)：_________乙方(买方)

(公章)：_________法定代表人(签字)：_________

法定代表人(签字)：_________

时间：年月日时间：年月日

可转换公司债券主要条款

12.强制转股条款：到期无条件强制性转股

a.本次可转债到期日前尚未转换股票的可转债，将于到期日强制地转换为本公司股票。可转债持有人无权要求本公司以现金清偿可转债本金，但转股时不足一股的剩余可转债，本公司将兑付剩余的票面金额。

b.转股价的调整

实施到期无条件强制性转股时，转股价将进行 调整，即以可转债到期日前三十个交易日股票 收盘价的平均值及当时生效的转股价两者较低的作为转股价格。若调整后的转股价格低于当时生效转股价格的_____％，则以当时生效的转股价格的_____％作为实际转股价格。

13.回售条款

a.回售条件

若本公司股票未能在距可转债到期之日_____个月以前（即_____年_____月_____日之前）上市，可转债持有人有权将持有的可转债全部或部分回售予本公司。

b.回售价格

回售价为可转债面值加上按年利率_____％（单利）计算的四年期利息，减去本公司已支付的利息。即：

回售价格=100×（1＋4×5.60％）－100×（1.3％＋1.6％＋1.9％＋2.2％）=115.4元/张。

14.担保人：__________________集团公司。

附注 执行可转债条款的有关事项

1.付息时债权登记日：

每年7月27日为付息登记日，付息将以该日深圳证券交易所收市后登记在册的可转债为基准。若该日并非深圳证券交易所的交易日，则以下一个交易日收市后登记在册的可转债为基准。

2.申请转股程序：

（1）转股申请的手续及转股申请的声明事项

转股申请通过深圳证券交易所交易系统以报盘方式进行。

可转债持有人可将所持的可转债全部或部分申请转为本公司股票。申请转换的股份数额须是债券交易单位手（即1000元面值）的整数倍，转换成的股份其最小单位为一股，出现不足转换成一股的零债部分，将按照附注第5条处理。转股申请一经确认不能撤单。

（2）转股的申请时间

自愿申请转股时间为可转债条款第10条规定的转换期内深圳证券交易所的交易时间。

（3）可转债的冻结及注销

深圳证券交易所对转股申请确认有效后，将记减（冻结并注销）投资者的债券数额，同时记加投资者相应的股份数额。

（4）股份登记事项及因转股而配发的股份所享有的权益

可转债经申请转股或强制性转股后所增加的股票自动登记入投资者的股票帐户。因可转债转换而增加的本公司股票享有与本公司原股票同等的权益，并可于转股后下一个交易日与本公司已上市交易的股票一同上市交易。

3.转股价格调整的手续

因分红派息、增资扩股而调整转股价时，本公司将公告确定股权登记日，并于公告中指定从某一交易日开始至股权登记日止暂停可转债转股。从股权登记日的下一个交易日开始恢复转股并执行调整后的转股价。

4.回售手续

在本次可转债合约中第13条第a款回售条件满足后5个交易日内，本公司将在中国证监会指定的上市公司信息披露报刊上刊登公告提醒可转债持有人。如可转债持有人决定行使回售权，应当在公告后10个交易日内以书面形式通过托管券商正式通知本公司，本公司在接到回售通知后10个交易日内，按第13条第b款规定的价格买回可转债。深圳证券交易所将根据本公司的支付指令，记减并注销可转债持有人的可转债数额，同时记加可转债持有人相应的交易保证金数额。

共3页，当前第2页123

借款合同的主要条款与形式有哪些

借款合同的主要条款

《中华人民共和国合同法》第一百九十七条第二款规定，借款合同的内容包括借款种类、币种、用途、数额、利率、期限和还款方式等条款。

借款的种类

借款的种类决定借款的期限、利率和其他合同条款。因此，合同中必须规定好借款的种类。

借款的币种

借款合同的标的是作为特殊商品的货币，根据不同情况可以是人民币也可以是外币。因此，合同中必须约定借款的币种。

借款用途

这是借款合同的最主要内容，出借方可以据此监督借款方的资金使用方向。只有符合国家批准的信贷计划所规定的用途，并保证专款专用，银行和其他金融机构才能给予贷款。目前，我国的贷款范围还限于生产、经营、基本建设、技术改造和社会服务等。至于弥补亏损、工资福利、垫支税款等支出，不能申请和发放贷款。

借款金额。

这是指根据借款方申请、经银行核准的借款数额。借款人可以按约一次性提取借款，也可以分期分批地使用，但不得超额。

借款利率。

在中国，银行的借款利率是由国家根据区别对待、择优扶植、有所鼓励、有所限制的原则，对不同行业规定不同利率。借款合同均须根据这种规定的利率签约。

借款的期限。

中国的银行贷款有短期和中、长期贷款之分。短期贷款一般不超过一年，中、长期贷款可达1一5年，甚至更长。无论是短期贷款还是中、长期货款，到期均需还本付息。

还款的资金来源及还款方式

贷款实行“有借有还、谁借谁还”的原则。国有企业偿还贷款的资金来源，可以是贷款项目投产后增加的产品利润，固定资产折旧基金和固定资产占用费等。乡镇企业偿还贷款的资金来源，可以是贷款项目投产后新增加的产品利润和固定资产的折旧基金等。在还款期间，企业的主管部门不得从所属企业贷款项目中提取利润和各项基金。基本建设“拨改贷”项目的利息，由建设银行按年计算，并在项目投产后，连同本金逐年偿还，且在新增加项目增加的利润中支付。超过规定的还款期限，则由企业的自有资金支付。至于如何归还，可以分期归还，也可以一次性归还。归还的方式不相同。应付的利率也相应不同。

保证条件。

借款合同必须规定保证条件，这是借款合同不同于其他经济合同的地方。借款合同的保证，以物资保证为主。在取得贷款方同意的情况下，借款人也可以采用保证人保证的方式。

合同的变更和解除

我国的《借款合同条例》规定，发生下列情况之一的，允许变更和解除借款合同：

①订立合同所依据的法规、政策、国家计划发生重大变化，原概算或预算发生重大变化甚至取消的;

②原批准机关决定缓建或停建该借款项目的;

③借款方经国家决定关闭、停产、合并、分立或转产，以致确实无法履行借款合的;

④由于不可抗力确实无法履行借款合同的。

此外，如借款方出现下列行为，经制止无效的，也可以导致出借方解除借款合同：违反财经纪律;不按规定用途使用贷款，或任意扩大项目规模;或管理不善，浪费严重，或进度缓慢，迟迟不能竣工的;或借款合同签订后，借款超过规定期限尚未用款的，都可以变更或解除原借款合同。

违约责任

出借方的责任是：未能按期限提供贷款，应按违约数额和违约天数，并按银行规定的罚息计息方法，付给借款方违约金。借款方的违约责任是：

①如果不按合同的约定用途使用贷款，出借方有权部分收回或全部收回贷款。对违约使用部分，按银行规定的利率加收罚息。

②借款方如不按期偿还借款，出借方有权限期追回贷款，并按规定加收罚息。

③借款方使用借款造成浪费或利用借款合同进行违法活动的，出借方有权收回本息。再由有关部门追究借款方的行政责任或经济责任。

争议的解决方式

双方当事人约定的其他条款

借款合同的主要形式

借款合同一般采用书面形式，但自然人之间借款另有约定的除外，借款申请书、借款凭证、协议书等有关材料均为借款合同的组成部分。

自然人之间的借款合同形式由借贷双方当事人约定，可以采用书面形式，也可以采用口头形式。

自然人之间的借款合同中没有约定借款人支付利息，或者虽然有约定，但是约定不明确的，可以认为借款人无须支付利息。

对于自然人之间的借款合同，如果约定了借款人要向借款人支付利息的，借款的利率要遵守国家有关部门的规定，不得违反。

买受人：

依据有关法律、法规和规章的规定，甲、乙双方在自愿、平等和协商一致的基础上，就130-7挖掘机含破碎锤买卖和完成其它服务事项，签订本合同。

第一条当事人及车俩情况

甲方基本情况：

1.自然人身份证号码：

现居住地址：

联系电话：

乙方基本情况：

1.自然人身份证号码

现居住地址：

联系电话：

卖出车辆基本情况：130-7挖掘机含破碎锤及相关配件。颜色黄购买日期车架号码。

第二条:价格：

经双方协商该车的转让价为人民币￥元甲方保证卖出挖掘机及破碎锤的合法性以及不存在任何权属上的法律问题应提供车辆真实情况和信息。在乙方购买之日起，挖掘机以前所有的债权债务由甲方负责，乙方不承担任何费用。

甲方应提供该车的各类证明、证件并确保真实有效。乙方将一次性付清余款，该机产权属乙方所有。

第四条违约责任

违反本合同第三条第1款，乙方有权解除本合同，甲方应无条件接受退回的车辆并退回乙方全部车款并赔偿乙方相应的一切损失。

第五条争议解决方式

因本合同发生的争议，由双方协商解决，调解不成的，可向成都市锦江区人民法院起诉。

第六条其它

本合同未约定的事项，按照《中华人民共和国民法典》以及有关的法律、法规和规章执行。本合同经双方当事人签字或盖章后生效。本合同一式两份，由甲方、乙方各执一份，具有同等法律效力。

甲方：乙方：

签约时间：年月日签约时间：年月日

二手挖掘机买卖合同范文，