汽修工英文怎么写20篇

Good morning,It is really my honor to have this opportunity for this interview; I hope I can make a good performance today. my name is Lixin, you can also call me Sweety.I am 25 years old and Im from Jiangxi Province. After graduating from Jiangxi Management of Economy Cadre Institute, the trade economical specialty since 20xx, I started to work. So now I have already had more than 6years working experience.

The knowledge I have learned in college and the 6years working lead me to a person with strong responsiblity and high working efficiency. besides, i am ambicious and flexible. I am not only able to finish the task alone but also to cooperate with other people very well which requires good ablity of communication.

Even though, my job in the past six years didnt require English skills that much, I am always very interested in it. Whats more, I never stop learning English in my spare time. In my opinion, people improve in the process of work, they also learn from the job.I am a quick learner. So I am totally confident that I can do this job very well. I will try my best to take the responsibilty and do everything as good as I can. Please trust my loyalty and effort, you wont be let down.

Thank you very much for interviewing me.

11. 羡慕你的生日是这样浪漫,充满诗情画意,只希望你的每一天都快乐、健康、美丽

12. 难忘是你我纯洁的友情!可贵是永远不变的真情!高兴是能认识你!献上我最爱的康乃馨,祝你生日快乐

13. 你的生命如舟，在人生的浪尖深谷中起落。生日时，我衷心祝愿你，平安地驶出港湾!

14. 生日祝福你，好事追着你，主管重视你，病魔躲着你，情人深爱你，痛苦远离你，开心跟着你，万事顺着你!

15. 因为你的诞生，使这一天别具意义，也显得分外美丽!只是一个小小的问候，却是一个浓浓的真意!

16. 青春、阳光、欢笑......为这属于你的日子，舞出欢乐的节拍。祈望你心灵深处芳草永绿，青春常驻，笑口常开。祝你生日快乐，健康幸福!

17. 两片绿叶，饱含着它同根生的情谊;一句贺词，浓缩了我对你的祝福。愿快乐拥抱你，在这属于你的特别的一天，生日快乐!

18. 幸福、愉快、欢乐都由你的生日而来，我把直诚的祝福化成一个美丽的谜，带到你的生日宴会上来，让你猜……

19. 日光给你镀上成熟，月华增添你的妩媚，生日来临之际，愿朋友的祝福汇成你快乐的源泉……谨祝你一生快乐。

20. 祈望你心灵深处芳草永绿,青春常驻,笑口常开。祝你生日快乐,健康幸福! 又是一个美好的开始,愿我虔诚的祝福,带给你成功的一年,祝你生日快乐! 在你的生日到来之际,诚挚地献上我的三个祝愿:一愿你身体健康;二愿你幸福快乐;三愿你万事如意!

Dear interviewer, Hello, my name is, the law is like a secret weapon in the world is much safer. In the four years of graduate study, I study the constitutional jurisprudence, legal history, Chinese, administrative law and administrative litigation law, civil law, commercial law, intellectual property law, economic law. The criminal law, civil law, criminal law, international law, international law, international economic law, master the basic theory of law and basic knowledge, understand and grasp the main laws and regulations of the state, the spirit of the law and the legal value behind the understanding and grasp of the rule of law, and the use of legal theory, method and thinking of problem analysis, solution the problem.

Book knowledge is limited, I actively participated in many social practice and community work, engaged in a large organization to plan the party, to answer the phone secretarial work, accumulated a lot of experience from success to failure. I think the actual operation ability and organization ability of cooperative learning is more important.

In the usual practice, I learned a lot, especially some books to school work experience, although there have been previous success and failures, from which I get is a lot of work principle and work experience for me now, things have become mature. In the past work, I work conscientiously, have team spirit and good communication skills.

As a graduate, maybe my knowledge is limited, perhaps I was too young, the lack of practical experience, I may not like other people in some areas to work freely, but the young means of enthusiasm and vitality. I dont have much experience, does not mean I can not. Because there is no experience, but more can let me focus on one thing, and not susceptible to outside interference, to maintain their own ideas, maintain their own sense of accomplishment. This will have more power, will be a big harvest. I am confident of their own abilities and learning work in learning and life after graduation to overcome all kinds of difficulties, to realize the value of life with the goal of Standard.

Date:

Dear...

It was with a great sense of loss when we/I heard of (insert name) death.

We/I wanted to let you know that you have our/my greatest sympathy,and our/my heart(s) are/is truly saddened.

(insert name) was more than just a wonderful person; he/she was always so kind and considerate to us that we always welcomed seeing him/her at every opportunity.

And,we know that his/her passing will not only leave a void in our lives,but in the hearts of all those who knew him/her.

(insert name) will always remain within our hearts,and we have included (insert name) and you in our daily prayers.May God give you strength.

If there is anything that we can do to help you in anyway,please do not hesitate to call us at anytime.You can phone either of us at (insert area code and phone number) even if it is only to talk.

Our sincere thoughts and prayers are with you.

With our deepest sympathy,

Im feel very sad to know that there was a heavy earthquake in your country,a lot of people lost their lives and also many people lost their home.

We can understand your feelings because our country also suffered the same events .Our best wishes will always with you .

Take good care of yourself and the people anound with you.

Good morning , I ‘d like to say thanks to you for this important interview. my name is。。。, I am 22years old. I come from Yantai, a beautiful city of Shandong province . when I graduated from senior high school, I was admitted by School of Electronics and Information of Tongji University. It is my great honor to be one part of this big family and I started my college life.

It has been three years since I came to shanghai . I learned a lot both in my study and my way to solve problems. I’d like to summarize it from 3 aspects:

Firstly, I used to be a girl that had no patience either in my study or in my own daily life. When I met with problems ,I always went to people for help . I would never calm down for difficult things. This made me dependent on my parents and my teachers. When I was in my senior high ,I did things my teacher told me to do with no reflect on it and had no plan for my study . I take it for granted that good marks will come to me if I do whatever my teachers let me to do and so it was at that time. But in college things turs out to be different . I should make a long term plan for my study life and find problems and their solutions all on myself. Teachers would never help you on basics. They would answer you problems you can’t make yourself with amounts of hard work. I was’t quite adapted to this way of study at first . so my grades was very low in my first year. But I used to be good at examinations . I was very upset about myself . but I finally figured out that if I want to learn something , I have to study it hard . college is different form high school, here I will learn academics , which are complicated and deep. Since then I began to get rid from bad habits like dependent on people and have no patience for things. My study turned out to be better and better after that and the second year , I was honor to have a scholarship from Tongji University.

Secondly , my personality has been changed a lot during my college life. When I was a senior high student all I had to do is study but since I came to Tongji University I joined many communities like the English Corner, the climbing club, the Drama Club. My life became very interesting and since these communities are organized by students , we communicated a lot and had fun together , besides I learned how to communicate an cooperate with others. This helps me in my study. When I do team work with my fellow students , I know how to do to be in a team.

Finally and most important , I learned the basic knowledge of computer science , I really love this profession. And I am eager to use it in my graduate study and even my whole career. Thank you .

10月20日  星期三  天晴

这一周，我们复习了第六单元统计和第七单元数学广角。

在一组数据中，出现次数最多的数，是这组数据的众数，众数能够反映一组数据的集中情况，一组数据中众数可能不止一个，有可能没有众数。

第二部分打电话有很多方法，最慢的方法是一个一个的通知，还有分组的方法。最快的方法是每个人都不休息，每个人都一起通知下面的人。

经过复习和做练习题，找次品时最好是把物品分成3份，不能平均时，只能相差1。

用天平称找次品时，知道所测物的数量时，还有只含有一个次品，知道次品比正品重或轻，有一个规律2至3个要称1次，4至9个要称2次，10至243个要 称5次。根据的规律是要的次数是几，就几个3相乘，这个数就是最多的所测物品。如果不知道次品比正品轻或重是，就要称很多次。

经过复习，有些爱错的题现在也不爱错了，而且印象深了。

Dear Sir,

Hello, very honored to have such a rare opportunity to introduce myself.

I am a student of the Department of international trade of University s School of economics and management.

About to graduate from college.

Within three years in school, I always keep their best work principle, strive to learn cultural knowledge, assiduously professional skills, actively involved in practice, enrich the com#prehensive and their development and achieved certain results.

As a student of international trade, I know the importance of English, so I have been to the high standard of English learning.

Through their own efforts, the results of the through the four test and a score of six through the examination.

In spoken English, I have been exercising, and reached a certain level.

In addition, I also lay the primary basis of japanese.

Not only in English, but also in the rest of the course hard to learn.

Four times in the six semester to get a scholarship, and once passed the national com#puter grade examination (two).

As a college student, I am well aware of the importance of com#prehensive ability, so I have been actively participating in school activities at all levels.

With my efforts, won the school of economics and management of outstanding students and academic year to get the title of outstanding members of the school, and becom#e a member of the com#munist Party of china.

At the same time, I actively participate in social practice, exercise their professional skills, grow their own professional knowledge, and to achieve a certain effect.

Through a series of internal and external activities, I have gradually mastered the skills of interpersonal com#munication and com#munication, and learned how to make themselves in a harmonious interpersonal relationship.

Through school I deeply understand the meaning of theory and practice, and indeed to the requirements of their own.

In learning and activities I also actively enrich himself, reading, rich knowledge and mastery of the com#puter application skills enough to handle the job needs.

That university has me hammer becom#e a character straight, strong willed, smart thinking, Chuluanbujing, lofty ideals and lofty aspirations, with enterprising spirit and team cooperation spirit of excellent college students.

I believe I have the knowledge and ability to do anything difficult work, the environment is difficult and can not hinder the com#pletion of the work I have to com#plete.

If I have the honor to becom#e a member of your com#pany, I will put all my youth and enthusiasm, effort into my work, achieved the desired results, for the com#pany s development and growth to contribute their strength.

Sincerely look forward to your reply!

Sincerely,

My name is Beibei. Im 11 years old and Im just in fifth grade.

My stature is not short, a round face with a short nose, a dark thick hair under a pair of bright big eyes, a pair of big mouth especially can say, as long as it is said, that is, three days and three nights are not tired. My advantage is that I like reading extracurricular books, such as composition books, counseling books, and so on. I often get mad at them. My disadvantage is poor sports performance, because I am fat, do not like sports, but my academic performance is beyond doubt, the exam has never been under 90 points.

This is me, living me! I am 100% happy! No "preservatives" in me!

Dear sir / madam:

Hello!

I am a senior student at University. I am going to enter the society. I am full of expectation for the future. I believe that "Well begun is half done" (good beginning is half of success),

I hope that your bank is the starting point for my success, I can together with your company to create a brilliant tomorrow.

The needs of the socialist modernization is a comprehensive quality management personnel, so I learn in the professional knowledge, the main English and computers, in English, I strengthen my training in listening, reading, and writing ability; say, in the computer, I start from the basics, to further understand the function of the OFFICE. INTERNET also studied the basic knowledge, can be used flexibly. Endprofessional after the election in order to broaden their knowledge, I also participated in the study of computerized accounting, master the basic applications and accounting software applications such as EXCEL. In order to make their study of the College Knowledge of the industry can be combined with the actual situation, and I have taught myself the relevant case materials, such as strategic management, corporate management, financial management, capital operation, etc., and applied it to my own internship

During the school has served as the class group secretary position, held responsible for the ban on activities within the organization and the comrades to join the group issued opinions, have strong communication skills and coordination ability; during my school has been awarded the title of outstanding members of school, class cadre of outstanding title, three good student title.

In four years in the field of study, I developed a strong character, this character made me learn and overcome some difficulties in life, positive in caries if I have the chance to be employed, I will be able to receive training at work and realize their own value, striving to do work elite, qualified staff. At the same time, I also realized, and working relationship is established on the basis of the self, I think I have the ability to have the confidence to do the job.

On graduating me, although the lack of work experience and social experience, although the lack of work experience and social experience, read books, traveling thousands of miles, these I will in the future practice of work and study continuously improve! I believe that opportunities will favor those who are prepared, I am looking forward to a bright future. Ready!

ood afternoon and nice to see you at this sunny afternoon.

I am very glad to be here for interview.

My name is YYX . I come from DLUFL and my major is english special lised in business.

Computer, books, films and climbing moutains are my favourite.

I have been a class president for nearly 4 years, and I also have been an interpreter at Dalian Garment Fair for twice.

I think all these exprience and my responsibility, creating thinking and passion would make me qualify for this job.

And whats more, my laptop computer is HP, so I have a better way to recgonize HP.

I believe that it would be a challenge and a chance for me to be a HP man.

Thats all ,Thank you so much!

Self Introduction

My name is Li peipei. I was born in Beijing in 1993 and now I was 13 years old. There are five people in my family now: my grandparents my father, my mother, and I. I love the members of my family very much. I was the only child. And when I was small I usually play with my friends in the park.

I am a very easy-going man. So, I have a lot of friends. I love English, because it’s one of the most famous languages in the world. In the future, I have a good dream, my dreams are going to America for further education and devoting myself to communication. So, in order to make the dream come true, I’ll try my best! I believe through my hard working, I am sure the God will provide better chances for me to build up my future career and personal characters.

That’s all, thanks.

In the last century, the Communist Party of China (CPC) submitted to the Party an application form for joining the Party in the last period, and actively supported the Partys leadership, supported various policies and policies, abided by state laws, regulations and rules. , And in the Party school graduation was named "outstanding students"; have a strong ambition, courage to criticism and self-criticism, and establish a correct outlook on life and values.

In the study, the strict demands on themselves, with Kaoyan goal and knowledge of the strong pursuit of assiduous, studious, correct attitude, a clear goal, basically a solid grasp of a number of professional knowledge and skills, to the theory with practice; Professional knowledge of learning, but also pay attention to the expansion of knowledge in various fields, a wide range of subjects under the knowledge of other subjects, thereby enhancing their ideological and cultural quality, to become a good college students and make unremitting efforts. Through my hard work, in the last phase of the hospital was awarded the first scholarship, and was listed as the object of life.

At work, a serious and responsible, have a better organizational capacity, served as sub-League Committee Propaganda Department during the period, the work of Tashi, hard working, strong sense of responsibility, many times, with the Minister of the outstanding completion of the CYLs propaganda activities and the Department of Various promotional activities. I combined their own expertise, positive for the Department of Zengguang, the Communist Youth League was held in the poster production contest and hand-copied many times in the award-winning newspaper. As a result of active efforts, outstanding achievements, was named the hospital "outstanding Communist Youth League", by the teachers and students alike.

In life, to develop a good living habits, life is full and structured, there is a strict attitude towards life and good attitude to life and life style, warm and generous, honest and trustworthy, helpful, have their own good accident principle, can And students live in harmony; actively participate in various extracurricular activities, which continue to enrich their own experience, has been in the winter social practice was named "advanced individual" title, and in the cultural and sports activities in many awards. Three years of university campus life is a turning point in life. In in September with excellent results admitted to University. Four years of campus life and social practice of life and constantly challenge themselves to enrich themselves, in order to achieve the value of life and lay a solid foundation. Has always believed that people should be living to the old to learn the old knowledge of the professional meticulous, which has been affirmed in the results, each year have been third - class scholarships. In not satisfied with the theory of course to learn at the same time also focus on a variety of application software and hardware research. So in the fourth semester began to be trusted teacher for the computer room of the person in charge.

Has a wide range of hobbies specializes in typesetting and web art and multimedia production, became the class members of the organization also joined the school student propaganda department. On the work of enthusiasm, hard working, and the Ministry of the members of solidarity, one year by ministries promoted to minister. During his tenure as minister, he attached great importance to cooperating with other departments of the school and the student union. He excellently completed all kinds of propaganda work and promoted the smooth operation of various schools.

The schools various activities are enthusiastic to participate in, years to years won the school entertainment and knowledge quiz and other first prize. Bold innovation on the newspaper page layout reform, making the school newspapers acceptance rate to a level. Various activities of the school are enthusiastic to participate in, in month won the school speech contest first prize.

As a student in the repaired academic also pay attention to the practice of society. In line with the theory of practice, combined with the theory to play summer vacation to skilled computer technology candidates into the Jieyang City Ling first computer technology department as a technician and training teacher. Technician and training department teacher. summer in Huidong County Yipeng printing company learning business cards and small advertising, trademark design, this has a solid foundation and strong interest in this week with a variety of skilled design software, and then made a lot of excellent design Program, the students and teachers alike.

XX年6月11日—XX年7月21日，我在x有限公司实习。在这期间，我对汽车维修站的零件供应，售后服务，维修等有了一定的理解和深刻的体会。

该公司有一流的维修设备：单生机、轮胎动平衡机等;还有先进的检测仪器：1551电脑检测仪、5051检测仪、1552电脑检测仪、修车王等，以及使用于维修业务的计算机网络、宽敞整洁的业务接待大厅和服务周到的客户休息室为客户提供舒适的环境。宽敞的维修车间设置18个标准工位，充分满足维修作业的需要，规格齐全、优质纯正的配件是一汽大众系列车辆的安全保证。该公司是一个大型的4s店，销售的车型有：捷达、速腾、高尔夫、红旗、开迪共5种车型。

一、 实习目的

1、通过实习加深我们对汽车专业在国民经济中所处地位和作用的认识，巩固专业思想，激发热情。

2、熟悉汽车修理环境、修理工具，为将来工作打下基础。

3、通过现场维修实习和企业员工的交流指导，理论联系实际，把所学的理论知识加以印证、深化、巩固和充实，培养分析、解决工程实际问题的能力，为以后的专业知识的学习、课程设计和毕业设计打下坚实的基础。

4、维修实习是对我们的一次综合能力的培养和训练，在整个实习过程中充分调动我们的主观能动性，深入细致地认真观察、实践，使自己的动手能力得到提高。

二、实习内容

该公司不但拥有一批高素质、高技能的汽车维修技工，而且从国内外购进一批先进的汽车维修检测设备。例如：各种电脑检测仪、油道清洗仪器、四轮定位仪等。

该汽车4s店拥有完善的维修服务流程，流程如下：

(一)汽车保养

汽车保养是十分重要的，该服务站的维修人员对客户的车辆认真负责。

汽车换机油的五个步骤：

1、正确选用润滑油的质量级别和粘度级别，捷达和宝莱所用的机油是四季机油，该机油级别为5w/40。

红旗488发动机所用的机油也是四季机油，机油级别为10 w/30。

红旗世纪星所用的机油也是四季机油，机油级别为10 w/30。

2、选用正规厂家生产的高质量机油滤芯，防止滤芯质量问题造成的油路阻塞、压力不足或过滤效果差而影响润滑效果。

3、换油时要在发动机出于正常工作温度时关闭发动机，拧开加油口盖，拧下放油螺丝放出旧油，然后用专用工具拧下旧的滤清器。

注意：拧下旧的滤芯时，一定不能把旧的滤芯上的密封圈落在机油座上，否则在下次换滤时很难拧下。

4、装配滤芯时，要在密封圈上涂抹上一些润滑油，以防止在安装时造成损坏。

5、机油滤芯装好后，拧紧放油螺丝。注意：拧宝莱、捷达车柴油的油底螺丝时，一定要用力矩公斤搬手。拧紧力矩为30n.m。然后按要求向发动机曲轴箱内加注一定量的新润滑油。宝莱、捷达车所加注的机油为原装的桶装机油。红旗488发动机原装机油为5.8l，但只能加入5l。红旗世纪星发动机原装机油为4.3l，加油时只能为3.5l为标准。机油且不可加得过多或过少。过多会造成润滑油消耗过快，发动机运转阻力增加，行驶无力，燃油消耗增加;过少会造成油压太低润滑不良等后果。

给汽车保养除了换机油外，还要检查发动机冷却液液面、刹车油液面、转向助力油液面是否标准，之外还要检查喇叭、灯光是否齐全，检查转向机构各连接部位是否松旷，检查轮胎气压。大众系列的车型轮胎气压一般都在0.2—0.25mpa。检查车辆有无漏水、漏油现象。

1、汽车机油的更换里程一般在5000—7500公里。因为机油发动机起到润滑、冷却、密封、清洁、防锈、防腐的作用，若没有机油或机油失效，汽车的心脏就不能很好的运转。

2、转向液和刹车液的更换为2年。因为制动具有吸湿性，使用过程中不断吸收周围空气中的水分，若制动液含水量过多，则会腐蚀制动系统，再则制动液本身的沸点也将显著降低，严重影响制动效果的安全性。所以制动液必须每两年更换一次。更换制动液使用的专业设备叫充排机，用这样的仪器更换制动液更彻底，不残留杂质，避免出现气阻。排放顺序为：右后轮→左后轮→右前轮→左前轮。

3、防冻液更换周期为2年。

4、汽油捷达、宝莱、红旗正时皮带更换的里程是6万公里，柴油捷达正时皮带的更换里程是9万公里。正时皮带对于发动机的运转是非常重要的，正时皮带要是断了，就可能把气门顶了，损失非常的严重。

两阀捷达、宝莱更换正时皮带时，必须把水泵张紧轮同时更换。

五阀捷达、宝莱把水泵张紧器、张紧轮同时更换，这些元件很容易抱死，抱死之后极易导致正时皮带串牙，也可能导致顶气门。

红旗车只需更换正时皮带、张紧轮。

5、火花塞的更换里程：

捷达、宝莱1.6、宝莱1.8、红旗为每3万公里换一次火花塞。

宝莱1.8t为10万公里换一次火花塞。因为这种火花塞是白金的。

火花塞不正常更换很容易产生漏电现象，这样可能会发生耸车现象。

6、变速器油分手动变速器油、自动变速器油，每6万公里必须更换一次。

自动变速器油简称atf油。atf油对自动变速器的工作、使用性能以及使用寿命都有非常大的影响。汽车自动变速器的保养主要就是对atf的检查和更换。由于atf工作特点的不同，在性能上有别于其它油液，主要有较高的粘温性。粘度过大过小都会使变速器传动效率下降，而粘度又随温度而变化。因此，要求atf低温时粘度不要太大，高温时粘度不能太小。

自动变速器具有以下特性：

(1)较高的氧化安定性：自动变速器在工作中其离合器等零件温度高达300摄氏度，在高温下油液与空气作用生成一种胶质粘附在阀体及各运动零件上，影响系统的正常工作。

(2)防腐防锈性：零件腐蚀或锈蚀会造成系统工作失灵以至损坏。

(3)良好的抗泡沫性：油液的泡沫影响传动油的正常循环，并有可能使离合器在各档一直处于不能彻底分离或不能接合的状态，使自动变速器无法正常工作。

(4)抗磨性：要求atf能良好的润滑各运动副，但摩擦系数又不能太小，否则离合器难以接合。

(5)剪切稳定性：液力变矩器中，传动油受到强大的剪切力，如油的剪切稳定性差，变矩器则会出现打滑，不仅降低了变矩器的传递效率，而且会出现换档不平衡，脱档等现象。用于自动变速器的油液应通过严格的台架试验和道路试验。

atf的功用在自动变速器中，atf有下列功用：

(1)通过液力变矩器将发动机动力传递给变速器，通过电控，液控系统传递压力和运动，完成对各换档元件的操纵;

(2)冷却：将变速器中的热量带出传递冷却介质;

(3)润滑：对行星齿轮机构和摩擦副强制润滑;

(4)清洁运动零件并起密封作用。

在更换自动变速器时，一定要检查油质、颜色、气味和杂质。加变速器油时不能加的过多或过少，因为油面的高低对变速器性能影响很大。若油面过高，旋转机件时剧烈搅动油液并产生气泡，气泡混入atf内，会降低回路的油压，影响控制阀的正常工作。同时，还会引起离合器、制动器打滑，加剧磨损。若油面过低，油泵吸入空气或油液中渗入空气，同样导致产生前述类似的问题。另外，油面过低还会使润滑冷却条件变差，加速atf的氧化变质。一般加入自动变速器中的油液数量，应保证在液力变矩器及操纵油缸充满以后，变速器中油面高度低于行星齿轮等旋转件的最低点，高出阀体与变速器壳体的接合面。

捷达、红旗、宝莱都用专用的原装变速器油。捷达手动变速箱换油量为1.8l。宝莱手动变速箱必须使用专用的自动变速箱差速器油，换油量为1.8l。宝莱自动变速箱换油量为3l。红旗手动变速箱换油量为2.5l。

宝莱自动变速器每换一次atf油时，都要换一次滤芯。

(二)汽车四轮定位

汽车一般在发生碰撞后都应及时做四轮定位。车轮正确的定位可能保证转向灵活、乘坐舒适、维持直线行车、延长轮胎寿命，减少路面引起的震动等。四轮定位不在标准范围内会导致轮胎不正常、磨损方面不稳、发抖、跑偏。影响四轮定变化的主要因素有：在不平路面上高速行驶;前轮受外力冲击，如过凹坑、上人行道台阶等;经常在原地打死方向;轮胎气压超出标准范围。

要进行四轮定位，就需要用到四轮定位仪，它主要由两大部分组成，一部分是计算机软硬件，计算机是我们常的pc机，这部分的关键是车规数据库，另一部分就是传感器插头。

做四轮定位的步骤：

1、让汽车行驶到四轮定位机上。

2、开启定位机。

3、挂上机头，

插上传感器插头。

4、校正机头之后，用方向盘夹子固定方向盘。

5、首先调主销内外倾角，其次调前束。

捷达、宝莱、红旗调主销外倾角的部位都不一样，

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

is our hospital in the new pragmatic leadership under the leadership of the critical years, the medical departments put forward new and higher requirements, so that our subjects are facing unprecedented opportunities and challenges. Pediatric will continue to adhere to enhance the ability of independent innovation, focus on accelerating reform and opening up, carry out the leadership intentions, continue to carry out in-depth medical management and medical quality management benefits activities, effectively solve the masses pain, and constantly advance the work of pediatrics.

First, adhere to the "patient-centered" service concept, and effectively the "patient-centered" printed in the heart, carved in the brain and put into action, fully respect the patient, understand the patient, the patient is thinking, , All the work around the patient, the patient as the center as the starting point of our work, but also as a test of our standards, around the convenient, efficient, high quality, affordable practical patients to do real.

Second, pay close attention to "medical quality" to strengthen rules and regulations. The full implementation of medical and health laws, regulations, medical systems and medical care procedures for the first physician-in-charge system, medical quality inspection system to improve the quality of medical care.

Third, strengthen the cultural construction, promote love and dedication, unity and cooperation, the spirit of selfless dedication, and strive to create high-spirited, vibrant vigor, righteousness.

Fourth, pediatric teaching and research group in our hospital shoulder the pediatric teaching, scientific research, curriculum construction and teaching and training and other tasks. According to the syllabus, the implementation of teaching plans, arrangements for interns with teaching work. The teachers teaching accident or in the quality of teaching on the serious problems in time. Arrangements for teaching and research group of various rounds. Complete the hospital leadership, science and Education Section of the other tasks assigned. Efforts to carry out scientific research, strive for results.

Fifth, strive to improve the pediatric ward, and progress.

5, I am cheerful, athletic, energetic, warm, sincere. Serious and responsible work, initiative, hard working. Strong self-confidence. Active thinking. Have strong organizational skills, practical ability and teamwork spirit, able to quickly adapt to the environment, and melt therein.

My name is Lilly. I am a local person who is 21years old. I am from chongqing and I am of the opinion that my hometown is a beautiful city.

Moreover, I would like to say something about my family. I have my mother ,my father,and my elder sisther,they love me very much,I know my parents have so much hops and dreams for me。So I must study well.

I have the confidence because I have such ability! I am kind-hearted, patient, outgoing and creative. I am a hard working student especially do the thing I am interested in. I will try my best to resolve any problem no matter how difficult it is. I always believe that one will easily lag behind unless he keeps on learning.

In spare time, I like reading books, surfing on the Internet, listening to music like, classic, or light music, because they can make me feel relaxed. Nobody could keep on working efficiently, therefore proper amusement is a must. In addition, I insist on do some physical training such as running, and horizontal bar as well. By doing this, I can always stay healthy.

That’s all. Thank you for giving me such a valuable opportunity!

在加油站经常会遇见为您推荐各种品牌的燃油添加剂的工作人员， 在加油站经常会遇见为您推荐各种品牌的燃油添加剂的工作人员，其添加剂 可以让车省油，可以清除喷油嘴的积碳等等。这些优点都是存在的， 可以让车省油，可以清除喷油嘴的积碳等等。这些优点都是存在的，但是前提 要跑高速方可发挥最大效果。 是，要跑高速方可发挥最大效果。 磨合期的车辆油耗稍有偏高是很正常的。 磨合期的车辆油耗稍有偏高是很正常的。不要因一点点油耗偏高就加入这些 添加剂。

况且在跑高速时， 辆匀速行驶本身就是最省油。 添加剂。况且在跑高速时，车辆匀速行驶本身就是最省油。别说新车的喷油嘴 没有积碳，就是有了积碳也可用高转速加大喷油量自行清洗的。 没有积碳，就是有了积碳也可用高转速加大喷油量自行清洗的。 一些因驾驶方式日积月累造成的喷油嘴积碳可以用这些辅助的添加剂来清 对还不存在严重积碳的新车而言，添加剂没有任何意义。

My name is & &, & & & & is the school students, I am an optimistic man, with a strong learning ability and innovation ability, I hope I can become a member of your company, and together for the company to create a better future.

In the school four years of training, for us, not just at the age increased, our various aspects ability has been progress and development. Let me know the importance, except study of personal ability and communicative competence.

In the study, to combining theory with practice. The school offered courses to learn, use of spare time, relevant professional books in the library, improve the professional knowledge, expanding professional skills, and actively participate in various competitions organized by the school of professional skills, to enrich their own good amateur life, laying the foundation for their future good. I taught myself VB programming language, and has won the national computer grade two certificate of VB, office software application senior operator certificate. Familiar with Windows20xx administration, the basic maintenance of Linux system, and has a certain programming ability, familiar with ASP Web Design

During the University, I have to improve its overall quality as the goal, the comprehensive development of the individual struggle direction, establish a correct outlook on life, values and world view. In order to meet the needs of social development, I seriously study and professional knowledge, play to their strengths; tap their own potential, combined with the social practice in summer, in order to improve their learning ability and analytical ability to deal with the problem.

In addition, in the study during the university life and the amount of social experience, I develop a calm and confident character and practical rigorous work style, and gives me the courage to participate in social competition. However, the knowledge is limited, the only university training is a way of thinking and learning methods, "empty talk. I, no matter known to practice". Therefore, I will learn from practice in the future, continue to study, work experience, improve the ability to work.

I have a comprehensive plan for my future. I hope I can continue to grow, improve my ability and realize my value

保研英语自我介绍

Good afternoon, teachers.

I am very glad to be here for this interview. First let me introduce myself. My name is abc, 25 years old. I come from Weifang, a beautiful city of Shandong Province. I graduated from Commercial College in July, 20xx and major in finance. Then, I was a teacher in abc, When I was a senior school student, I am interested in thought and began to read a certain classic work of Marxism, especially I finished reading “the florilegium of Mao ZeDong”. From then on, I have dabbled in more and more theoretical works and accumulated great interests in theory study, especially in Marxism.

I have a dream, a dream of my study. I wish devote my whole life and energy into the development of the Marxism. If I have the opportunity to study in abc University, I’ll dabble in as much as document about the specialty as possible. If it is possible, I want to get the primary accomplishment in my major, at least, a stable basis.

Personally, for today’s China, the first task to the development of Marxism is a process of construction. That’s to say, we should understand Marxism mostly from the aspect of construction and development of social society. Only when our socialistic country has a more rapid and balance development than the capitalistic, we can enhance the attractiveness and persuasion of Marxism eventually.