外贸感恩节祝福语（合集20篇）

外贸代理合同样本

合同号：

no：

日期：

date：

为在平等互利的基础上发展贸易，有关方按下列条件签订本协议：

this agreement is entered into between the parties concerned on the basis of equality and mutual benefit to develop business on terms and conditions mutually agreed upon as follows:

1. 订约人

contracting parties

供货人（以下称甲方）：

销售代理人（以下称乙方）：

甲方委托乙方为销售代理人，推销下列商品。

supplier: （hereinafter called “party a”）

agent:（hereinafter called “party b”）

party a hereby appoint party b to act as his selling agent to sell the commodity mentioned below.

2. 商品名称及数量或金额

commodity and quantity or amount

双方约定，乙方在协议有效期内， 销售不少于商品。

it is mutually agreed that party b shall undertake to sell not less than... of the aforesaid commodity in the duration of this agreement。

3. 经销地区

territory

只限在.....。

in ... only.

4. 订单的确认

confirmation of orders

本协议所规定商品的数量、价格及装运条件等，应在每笔交易中确认，其细目应在双方签订的销售协议书中作出规定。

the quantities, prices and shipments of the commodities stated in this agreement shall be confirmed in each transaction, the particulars of which are to be specified in the sales confirmation signed by the two parties hereto.

5. 付款

payment

订单确认之后，乙方须按照有关确认书所规定的时间开立以甲方为受益人的保兑的、不可撤销的即期信用证。乙方开出信用证后，应立即通知甲方，以便甲方准备交货。

after confirmation of the order, party b shall arrange to open a confirmed, irrevocable l/c available by draft at sight in favour of party a within the time stipulated in the relevant s/c. party b shall also notify party a immediately after l/c is opened so that party a can get prepared for delivery.

6. 佣金

commission

在本协议期满时，若乙方完成了第二款所规定的数额，甲方应按装运货物所收到的发票累计总金额付给乙方*％的佣金。

upon the expiration of the agreement and party b´s fullfilment of the total turnover mentioned in article 2, party a shall pay to party b... ％ commission on the basis of the aggregate amount of the invoice value against the shipments effected.

7. 市场情况报

reports on market conditions

乙方每3个月向甲方提供一次有关当时市场情况和用户意见的详细报。同时，乙方应随时向甲方提供其他供应商的类似商品样品及其价格、销售情况和资料。

party b shall forward once every three months to party a detailed reports on current market conditions and of consumers´ comments. meanwhile, party b shall,from time to time, send to party a samples of similar commodities offered by other suppliers, together with their prices, sales information and advertising materials.

共3页，当前第1页123

合同编号：

签订时间：

签订地点：

甲方：

乙方：

甲乙双方本着平等互利、友好协作的原则，经协商，就甲方与乙方联合经营出口业务达成如下协议：

一、 甲方责任：

1、甲方与乙方联合经营出口 产品，具体品名、规格、数量及价格等以出口合同为准。

2、协助乙方对外索赔，由此产生的费用由乙方承担。

3、提供本协议每一票出口货物所需出口相关单证。

4、负责向银行办理交单议付手续和收结汇。甲方在收到结汇水单、出口核销单、报关单及乙方提供的增值税发票(经国税局认定为真实有效的增值税发票)后三个工作日内，按结算比率(详见结算表)将款项(扣除银行和甲方代垫费用)付至乙方工厂;如汇率变化，按新汇率执行。若外汇货款到帐发生在每月的1—10日期间，则货款先按1美元： 8.05元人民币付给乙方，余款延至每月10日后付给乙方。

5、负责办理外汇核销手续。

二、乙方责任：

1、负责办理本协议每一票外销合同项下的货物订仓、排载、装运、报关、报检、保险及编制有关单据等手续，甲方积极协助乙方办理上述手续。

2、乙方对货物的质量、数量、包装、交货期负责，因货物质量、数量、包装、交货期以及不可抗力等原因造成的损失由乙方承担。

3、负责联系境外客户，通知境外客户将外汇货款支付到甲方指定的银行帐户，或开立以甲方为受益人的即期不可撤消信用证。所有因外商索赔，外商违约或者其他原因造成本协议外销合同未能履行、延迟履行、部分履行或履行不符合约定条件，使甲方未能按时收汇核销或无法收汇核销，乙方承担由此产生的一切经济损失和法律责任。

4、乙方异地自理报关的，应接受甲方监督管理，并提前5天将出货计划和需要领取的单证传真给甲方。所领取的单证应在30天内归还甲方，乙方应保证合法、安全地使用甲方提供的单证，如发生单证丢失、使用不当和延误等情况，所引起的一切后果和经济损失由乙方承担5、乙方应遵守国家法律、法规和各项规定，乙方对甲方在授权范围内依本协议所做的

一切行为承担法律责任。若乙方在执行本协议过程中因假冒商标、假冒产地或商标侵权等违法违纪导致甲方经济和声誉损失，乙方负全部责任。

6、乙方必须在报关出口后60天内提供与本协议项下每批货物的出口报关单相符的，由供货工厂开具的增值税发票，承担增值税发票不合法、不准确、不正确而导致甲方无法退税或造成骗税行为的经济损失和法律责任。如乙方提供的增值税发票、关单、核销单系伪造或有其他与税务局等国家管理机关要求不符之处，甲方有权拒付相当于应退税款的余款。

7、乙方应督促境外客户按时付汇，保证甲方能在报关出口后3个月内收回外汇。若无法按时收汇核销而导致无法退税的，乙方应承担由此产生的一切经济损失和法律责任。

8、若由于乙方原因导致无法退税的，乙方仍需安排外汇到帐，且必须开具普通商业发票给甲方，同时甲方向乙方收取出口报关金额1%的手续费;若乙方无法安排外汇到帐或无法开具普通商业发票给甲方，由此产生的一切经济损失和法律责任均由乙方承担。

三、货款结算：

1、甲方应付乙方货款以净收汇按以下结算比价表计算：

出口退税率 结算及开票比价(美元:人民币)13%

2、乙方应按开票比价足额开具增值税发票，开票不足的应退税款由乙方承担。

3、甲方付给工厂的货款应通过银行汇付，收款人必须与开票单位相一致。

四、信用证审证条款：甲方收到信用证后翻译并传真给乙方，由乙方决定是否接受，经书

面确认后传真给甲方。

五、如遇国家汇率有较大幅度变动或国家调整退税率，甲乙双方另行商定补充协议，其补

充协议与本协议具有同等法律效力。

六、签约期限从 20__ 年 月 日至 20__ 年 12 月 31 日。

七、本协议未尽事宜，由甲乙双方友好协商解决。若发生纠纷，依据《中华人民共和国民法典》的有关规定在合同签约地管辖法院诉讼解决。

八、本协议正本一式二份，双方签字盖章后生效，甲乙双方各执一份，具同等法律效力。

甲方： 乙方：

代表(签字)： 代表(签字)：

甲方(盖章)： 乙方(盖章)：

considering the quality of food that children make their mothers on mother’s day, it becomes apparent that without moms, their kids would starve to death.

想想母亲节时，孩子们为妈妈所做的早餐;显然，如果没有妈妈，孩子们会饿死。

we would love to fix breakfast for you mom, but we think it would be safer for us all if we took you out.

妈妈，我们很想为您准备早餐，不过我们想，如果带您上馆子，会比较保险一点。

this card is to let you know that you have done a super job raising us children.

这张卡片是想告诉您，在教养子女方面，您做得棒极了。

when i was sick, you always stood by me.

当我生病时，您总是陪伴着我。

this is the day that we appreciate all the things that moms do for us. thank you.

在这个日子里，我们感谢妈妈为我们所做的一切。谢谢您。

进公司已经近一年，对公司的业务流程已经有初步的了解和认识，20xx年即将过去，现总结一下几点：

一，业务能力

1. 对公司的产品一定要熟悉，只有对产品熟悉，才能根据产品的情况定位市场，当客户提到专业的问题的时候，才能多给客人提建议并且推荐相匹配的产品。

2. 对市场的了解，包括客人目标市场的了解以及同行业其他公司的相关信息的咨询，并能推陈出新，给客人提供最新款的产品。

3. 业务技巧，客人都喜欢和专业的业务员沟通，因为在和客人沟通的过程中也是一个互相学习的过程，在电话电邮的过程中，我们通过和客人的交谈来了解客人的需求。

二，个人素质能力

1. 诚实守信

客人比较注重业务的诚信以及事情处理的时效性。

2. 热情

业务员需要对本职工作需要有热情，才能开展好工作，特别是做外贸是一个很漫长的一个过程，需要对客人热情。

3.耐心

在外贸开发客人的过程中，周期比较长，客人需要持续的跟下去，一定需要耐心，定好工作计划，有条不紊的开展。

4.自信心

询盘的客人当中是海量的信息，真正有意向性的客人需要逐步的筛选，真正下订单的也就那么几个，但是需要有信息一直跟下去，因为从客人从不熟悉到熟悉到信任你需要一定时间的接触。

三.公司平台

公司在环球的后台持续运行，要持续更新产品并且尽快维护和更新。

四.公司网站

公司的网站目前尚还需要更新速度以及健全产品信息。

五.业务还需要加强相关专业知识，比如对市场讯息的把握。

六.公司各部门之间需紧密协调。

针对目前的情况对20xx年的建议

一. 公司目前的规模正在上升期，客户群的建立和维护都需要一个过程，在现有条件上还需要多开发新的资源，可多寻找多方途径以及渠道增加客户群体。

二. 充分利用好目前现有的网络平台，和客人保持跟进，针对客人不同的群体给客人建议向匹配的产品。可多在网络平台上寻找客人信息。

三. 展会，可多参加一些展会提升产品的影响力。 利用有效资源，尽量低成本开发以及接触合作客户。 针对客人的特征花不同的心思，重点客人重点开发，其他尚无具体意向性的客人可不必花费太多的比例时间。

四.多向客人推荐我们公司有竞争优势的产品 和客户关系维持融洽。 多和客人沟通，对我们的服务提出意见以便后续的改进。 报价单尽量做到新颖并吸引客人要求。产品图片尽量做到精美及完善。 多学习一些商贸邮件以及和客人沟通的技巧。

五. 了解本行业的发展状况，如有些产品会有一定的淡旺季，要根据不同时期制定不同的推行计划。

1.妈妈在心上刻了儿女的名字，所以，就算距离千里万里，我们也被妈妈装进了心里。母亲节要到了，最美的祝福送给亲爱的妈妈，让她的心一直暖暖的。

2.母亲节，我的祝福送妈妈：祝福您平平安安一辈子，祝福您幸幸福福一辈子，祝福您快快乐乐一辈子，我会爱您一辈子！祝妈妈节日快乐！

3.心灵烙印着母亲的爱，成长寄存着母亲的牵挂，行程链接着母亲的思念。母亲是回家的渴望，母亲是心灵的航向。愿天下母亲节日快乐！

4.有这样一个人：她忍着剧痛把你带到世间，无怨无悔默默为你付出，挺直脊背为你解决烦恼，不求回报只愿你健康平安。今天母亲节，记得感谢她的好！

5.母亲节听妈妈话：生不完的闷气，说说，心境宽广；接不完的应酬，辞辞，有利健康；尽不完的孝心，走走，回家看看；还不完的人情，掂掂，量力而行，母亲节快乐！

6.妈妈你最好，愿你年轻永不老；母亲节日今来到，祝福绵绵把您找；愿你身体更加好，舒畅快乐紧紧靠，甜甜蜜蜜来欢笑，永永远远无烦恼！

7.你最得意时，她会提醒你不要太骄傲；你最落魄时，她会告诉你还有我；你犯错时，她会抱着你说没关系。在她心里你永远都是孩子。她就是母亲。

8.为了我，她的黑发变成了白发，尽管岁月在她的身上留下了无数的痕迹，但也让我记得要去感谢她！辛苦了，妈！

9.妈妈，母亲节将至，我用祝福给您扎了一束康乃馨：健康是花瓣，平安是花茎，幸福是花蕊，快乐是花心，祝妈妈健康平安、幸福快乐！

10.母亲节到了，别忘记母亲的养育之恩，给她送上最真最美的祝福。顺便告诉她我衷心的祝愿，感谢她的培养，让我拥有你这样的好老婆！

11.作为女儿你是母亲的骄傲；作为母亲你是女儿的骄傲；作为妻子你是丈夫的骄傲；作为朋友你是我的骄傲！祝妈妈开心快乐！

12.走过了那么多年，我才深深知道，最爱我的人是您，妈妈。因为只有您对孩子的爱是不求回报的，无私的。

13.dear妈妈：这十几年来你辛苦了！希望在这特别的日子送上我特别的问候！祝：母亲节快乐！妈妈我永远爱你！

14.今天是母亲节了，我用心灵之纸折成最美的康乃馨，献给你的妈妈，祝她幸福平安！更感谢她养育了你，使你成为我生命中不可缺少的朋友。

15.外边风吹雨打折磨着我，屋内和煦的阳光暖和着我，由于屋内有您，我爱您妈妈，永远永远！

为大力弘扬中华民族传统美德，以关爱母亲为荣，倡导温馨和谐平等健康的文明家庭,努力在全社会营造感恩母亲、尊重母亲、热爱母亲、珍爱生命的良好氛围。今年感恩节期间，社区开展了丰富多彩的庆祝感恩节系列活动。进一步以和谐家庭建设、和谐文化建设促进社会的文明与进步，在全社会营造关注女性、尊重女性的良好氛围。现将有关活动情况总结如下:

一、领导重视、精心组织

20xx年"感恩节"期间，我村根据镇妇联关于"感恩节"活动的总体部署，按照服务大局、服务妇女、服务基层的要求，结合本地实际，坚持贴近实际、贴近生活、贴近群众的原则，把开展纪念活动与切实为妇女群众办好事、做实事、解难事结合起来，采取生动活泼、寓教于乐的形式，精心策划和创新组织了各类特色纪念活动，努力营造浓厚的节日氛围，使广大妇女积极参与并从中得到启迪和教育。在镇妇联的正确领导下，同时也得到了镇党工委领导的高度重视，今年的感恩节系列活动内容丰富、成效显著。

二、主题鲜明、形式多样

1、关注女性健康，营造关爱母亲的良好社会氛围

在感恩节期间，我村在永安市场开展了以"关爱母亲，倡导温馨和谐平等健康的文明家庭"为主题的系列庆祝活动，号召辖区居民以实际行动报答母亲的养育之恩，关爱他人，争做祖国母亲的好儿女，做文明诚信的好公民。同时召集了学生和家长，开展了"让孩子体会母亲的辛劳，给母亲写一封信"办一期黑板报等活动，通过此次活动的开展得到了各位家长的好评，在辖区内收到了良好的效果。

2、深入开展慰问贫困母亲活动，努力为广大基层妇女办实事、办好事、解难事。

感恩节期间，办事处妇联合看望慰问了全村8名生活贫困的残疾母亲，送去了慰问金，带去了党和政府对她们的支持和关心。5月9日上午，我村计生协会人员上街开展"感恩母亲，共建和谐"为主题的宣传活动。在宣传活动中，共发放尊重妇女、关爱女性、妇女权益保障、女职工劳动保护、消除家庭暴力、妇女卫生保健等各类法律法规宣传资料200余份，免费发放各类生殖保健和计划生育药品300多盒，并利用母亲健康爱扬对经过的母亲和过往路人进行免费义诊。并联合西关小学开展了以"妈妈--我有多爱您"为主题的活动。期间，发放了致家庭的一封信，对所有员工的母亲致以最诚挚的问候，并通过孩子们转达祝福，衷心地祝愿所有的母亲身体健康、节日快乐。

感恩节期间，我社区走访慰问了本村贫困母亲，并为她们送去了慰问金，带去了党和政府对她们的支持和关心。在宣传活动中，为广大妇女宣传尊重妇女、关爱女性、妇女权益保障、女职工劳动保护、消除家庭暴力、妇女卫生保健等各类法律法规宣传资料。

十一月的第四个星期四是感恩节，我在感恩节的那天，做了一个信封，上面写着：徐嘉送给妈妈的礼物。里面还夹着一个小纸条，上面写着：妈妈您是我的修树人，我好比一棵小树，您拿着剪子帮我剪掉以长坏的树枝，让我成长得更快，谢谢您，妈妈。妈妈一下子把我搂在怀里，说：“佳佳真懂事！”我好高兴。

我又送给爸爸了一个纸飞机，纸飞机上面写着：徐嘉送给爸爸的礼物。纸飞机的缝缝儿里还有一个信封，里面也有一个纸条上面写着：爸爸感恩节快乐，爸爸惊喜的“嗯”了一声，说：“我的佳佳长大了！”，我笑眯眯地走进了书房，要给爸爸妈妈弹两首儿童歌曲，是《小红帽》和《金孔雀轻轻跳》。悦耳的钢琴声。全家人的笑声回荡在真个房间。

同学们，你们是怎么过感恩节的呢？跟大家一起说一说吧！

外贸业务员年终总结

在公司的这段时间我也特别感谢大家对我的照顾及帮助，当然要特别感谢的是主管。记得刚来时真的是很多东西都不懂。都说新人是需要人带的，我可能算是幸运的一个，因为有经验丰富的主管带着。记得刚开始什么都不懂，不懂得如何收发传真，不懂得如何在b2b上发布信息，不懂得如何对一些询盘函做出正确的回复。这段时间在主管的悉心指导下真的学会了很多，除此之外平常大家也会教我一些做人做事的道理，这些是在学校里是学不到。当然以后的路还很长，要学的还很多，我会继续向大家好好地学习。

最后希望在新的一年里，不管是公司还是个人都能以全新的面貌来迎接新的挑战，希望公司所有的员工都能齐心协力，努力让我们公司走得更好，走得更远。

共2页，当前第2页12

1.世界上其他一切都是假的、空的，唯有母爱才是真的、永恒的、不灭的！外边风吹雨打折磨着我，屋内和煦的阳光温暖着我，因为屋内有您！我爱您妈妈！

2.想送您康乃馨，您总说太浪费；想请您吃大餐，您说外面没家里吃的香；想送您礼物，您总说家里什么都有。但有个礼物我一定要送：妈妈，我永远爱你！

3.世界上只有一位的女性，她便是慈爱的母亲；世界上只有一种最美丽的声音，那便是母亲的呼唤！亲爱的妈妈，我给您最真的祝福，祝您母亲节快乐！

4.有些情，埋得越深，就越真；有些事，藏得越久，就越妙；可是有些爱，只有说出，才。对妈妈的爱，请你大声说出来！祝你的妈妈，母亲节快乐。

5.有许多人、许多事，经历了转身便会忘记，但在我们的心灵深处永远不会忘记我们的母亲，永远不会因为岁月的流逝而消减我们对母亲那深深的爱。母亲节快乐！

6.您的爱护我谨记每秒每分；您的教诲我时时刻刻带在身，您的慈祥是我永远的根；我已经长大成人，对您的爱却越来越深。在这个特殊的日子里，祝您节日快乐！

7.谁能掂估出这爱的重量？谁能测量出这的深厚？母亲！您的爱，有开始，无结束；您的情，有源头，无尽头。这无休无止，无穷无尽的爱和情，儿女将永记在心。

8.母亲节到了，我愿您康康健健，我愿您平平安安，我愿您笑口常开，我愿您幸福无边；我愿您老当益壮，我愿您精神饱满，我亲爱的妈妈，永远爱您，祝您节日快乐！

9.天地很大，我却走不出您的牵挂；世界很广，我却抛不开您编织的亲情网；海水很深，却不及您的养育恩。千言万语凝结成一句话：妈妈，您辛苦了！

10.您的皱纹深了，您把美丽的青春给了我；您的手粗了，您把温暖的阳光给了我；您的腰弯了，您把挺直的脊梁给了我！谢谢你，亲爱的妈妈，母亲节快乐！

11.我第一次睁开双眸所注视的就是您最慈爱的眼神，它像纯净的清流汇入我的心扉，让我渺小的身躯千万次呼唤-妈妈！我爱你！虽然没有说出口，但我爱你！

12.给您沏一杯淡茶，送去儿女对你的挂念；给您捶一捶背，送去儿女对你的关心；给您道一声祝福，送去儿女对你诚挚的爱。母亲节到，愿母亲健康平安，幸福快乐。

13.妈妈您辛苦了，是您把我培育成人的，也是您教给我了做人的原则。我在这里谢谢您妈妈。我还要在这里忠心的祝福您节日快乐，同样也祝福全国的妈妈们节日快乐。

14.享受母爱，享受人生；失去母爱，失去温馨；缺少母爱，缺少欢心；不忘母爱，不忘根本；珍惜母爱，珍惜亲情；回报母爱，回报良心。祝天下母亲快乐开心！

15.莫要疲惫，莫要劳累，发间白发，爬上鬓头；莫要挂念，莫要担忧，放开心怀，享受生活。今天是母亲节，我只有一个小小的要求，好好休息注意身体。

甲方：

乙方： (自然人)

一、甲方责任义务：

1. 甲方同意乙方以深圳市纪友隆进出口有限公司名义对外开展业务活动。

2. 甲方有义务根据乙方的要求对外签订外贸合同，对内与供应商签订购销合同。合同签订后，即时将合同副本送交乙方。

3. 甲方将无偿为乙方提供谈判场所;提供通讯便利，但其实际发生的费用应在乙方业务收入中扣减。无偿提供出口业务及法律法规咨询;按时提供全套公司单证;在乙方指定地点办理海关、商检备案手续。

4. 甲方在货物上船后与乙方再次確認提单资料，出正本提单后交给乙方，由乙方自行寄给收货人;(适用于走海运货物)，如果乙方有特殊說明的除外.

5. 甲方保证维护乙方的商业秘密。并通过自己的渠道协助乙方扩大业务。

6. 甲方保证乙方运用资金的安全，承诺不挪用，不拖付乙方资金往来，并在安全收汇后2--3个工作日，按照当日牌价结算人民币货款给乙方或由乙方指定的生产厂商。甲方保证乙方的利润所得，并根据双方商定的时间方式，向乙方支付。

7.如果由于甲方的问题导致货物不能准时出口到港(目的地)所产生的费用由甲方负责(船公司的问题或由于不可抗力的因素影响除外)。

二、乙方责任义务：

1. 遵守法律和国家外贸、外汇、海关方面的政策。

2. 维护甲方的声誉和利益，遵守甲方及其它双方商定的工作程序。

3. 自行承担自身业务的所有费用。

4. 乙方提供给甲方的相关出货资料必需真实，有效，并具有合法性。

5. 如乙方指定货代以及需异地报关出口的货物，乙方应通知甲方其货代名称、地址、联系人、电话、传真等详细资料，并允许甲方与货代直接联系，在货物正式报关出口前，由货代将装箱单、发票传真给甲方确认

6. 单单结汇。乙方愿意支付甲方每笔转帐金额的 千分之三(RMB)，但每票不低于(RMB) 贰佰元整 ，不高于(RMB) 壹仟元整 做为手续费，如在转帐过程中(非甲方操做失误)产生的银行费用由乙方自行承担。

三、法律责任：

1. 双方必需严格执行本协议，若因外商原因导致外销合同延迟履行、不能完全履行或不能履行时, 至使甲方不能履行本代理协议时, 甲方不承担任何责任。但在乙方提出书面请求并提供费用协助下, 代理人有义务向外商交涉索赔。

2. 在本合同项下，如一方违约，除依法依约承担违约责任，赔偿责任以及赔偿守约方的实际损失外，还应承担守约方为实现债权而支付的费用，该费用包括但不限于律师费用、诉讼费用、差旅费、通讯费。

3.自违约方违反本合同约定及法定义务之日起,其于后支付的任何款项按以下顺序清偿：(1)守约方为实现权利支付的费用;(2)利息或违约金、损失赔偿金;(3)货款本金。

四、争议解决方式：

1.本合同适用《民法典》及我国对外贸易代理的有关规定。

2.委托代理过程中发生纠纷，由双方协商解决，协商未果的，由合同签订地法院裁决。

五.其它事项：

1.本协议一式两份双方各执一份，具有同等的法律效力. 自双方签字盖章之日起生效，有效期壹年，协议到期停止执行. 但在双方帐务、事务未清之前，协议条款继续生效，如帐务、事务结付完毕此协议条款自行作废，如继续执行，协议重签才有效。

2.甲乙双方在执行过程中，若对本协议上述条款有不同的见解和异议，需经双方协商研究同意后方能够进行修改和补充。补充或修改的內容应以书面提出并经双方签章后生效，并与本代理出口合同具有同等的法律效力。

甲方： 乙方：

法人代表： 身份证号：

签订日期： 年 月 日 签订日期： 年 月 日

1. 团聚家人万事福，恩恩怨怨总是情。成亦不喜败无忧，尽情使得乐心事。万富吝舍还是穷，得时知失快乐生。天若有情天亦老，人因无我乐自常！

2. 新春心情好，天天没烦恼；举头揽幸福，低头抱美好；一颗快乐心，一家温馨情；幸福身边在，健康迎未来；朋友，我在远方祝你：鼠年春节好！

3. 新的一年，我们又长大了一岁，希望我们的快乐也是有增无减的。欢乐中国年，幸福喜连连，愿你健康幸福，开心每一天！

4. 新的一年，祝你鼠年行大运！财源滚滚，发得象鼠头一样！身体象鼠熊！爱情赛蜜蜂！钱财比牛毛！事业如袋鼠越跳越高越远！

5. 新的一天开启新的一年，新的希望点燃新的激情，新的努力成就新的成功，新的时光记录新的幸福！新年快乐！

6. 新年大吉，祝你一如既往，二人同心，三口之家，四季欢畅，五福临门，六六顺意，七喜来财，八方鸿运，九九吉祥，十分美满！

7. 新年到，新年好，新年祝福少不了，带上我的诚心诚意，送上我“成字”的祝福。祝你：大器早成，马到功成，家业大成，笑容倾城！成心想事，事事都成！

8. 新年到百花香，一条信息带六香。一香送你摇钱树，二香送你贵人扶，三香送你工作好，四香送你没烦恼，五香送你钱满箱，六香送你永安康！祝春节快乐！

9. 一元复始、万象更新、年年如意、岁岁平安、财源广进、富贵吉祥、幸福安康、吉庆有余、竹抱平安、五福满门、喜气洋洋！春节快乐！

10. 英雄跨马扬长去，美女牧羊载福来，酒不醉人人自醉，色不迷人人自迷，祝你新年：出门赚钱钱到手，上网钓鱼鱼上钩，餐餐鲍翅享不尽，天天靓妞泡不完！

11. 有一种欢庆叫鞭炮，有一种心声叫对联，有一种幸福叫除夕，有一种感动叫团圆，有一种亲情叫年夜饭，有一种生命叫春节，有一种祝福叫祝你春节快乐。

12. 又是一年除夕夜，又是一个新年到；岁月往复，季节交替，鼠年迎来鼠年过，祝福没变，关怀还在。送上问候，传递相思，新年快乐，好运滚滚来！

13. 新年的钟声，敲响了快乐的团聚；璀璨的烟花，写下了喜庆的美景；香醇的美酒，承载了富贵与平安；温馨的祝福，传递了无限的友谊。新春来临，衷心祝你新年愉快，身体康健，心想事成，万事如意。

14. 新年的钟声就要响起，愿这吉祥的钟声能为您及家人带来平安、幸福、健康和快乐！祝新年快乐，万事如意！一年又比一年强。

15. 在新的一年里，祝您：事业正当午，身体壮如虎，金钱不胜数，干活不辛苦，悠闲像老鼠，浪漫似乐谱，快乐莫你属。鼠年新春快乐！

16. 在鼠年即将来临时，送你旺旺大礼包：一送你摇钱树，二送你贵人扶，三送你工作好，四送你没烦恼，五送你钱满箱，六送你永安康！

17. 鼠年春节祝福慢慢送，一送你缘分的“缘”，送一个祝福是一种缘；二送你财源的“源”，祝你新的一年有财源；三送圆满的“圆”，愿你家庭幸福团团圆圆！

1.大红灯笼门前挂，欢天喜地贴窗花。年宴元宝水晶饺，合家团圆美满夸。填平穷坑迎幸福，日进斗金钱包鼓。腰缠万贯洋财发，小车洋房无限富。愿新年快乐！

2.新年到，祝愿你：面对爱情，“春”风得意；面对事业，“节”节攀升；面对世界，“快”活似仙；面对生活，其“乐”无穷。新年快乐！

3.新年到来送吉祥：一送好运不可挡，天天赚钱忙；二送温情心中发藏，朋友莫相忘；三送福以禄与健康，身体永强壮；四送幸福万年长，快乐永安康。新年快乐！

4.新年到了，请把烦恼收藏，把快乐搜索，把健康下载，把财运复制，把如意粘贴，把平安保存，把幸福编辑，把生活刷新，嘿嘿，你就偷着乐吧。

5.新年到了，送你三块巧克力：第一块德芙，望你得到天下所有的幸福；第二块金帝，祝你在金色年华过着帝王的生活；第三块吉百利，祝你吉年百十顺利。

6.新年到了，送你一个饺子。平安皮儿包着如意馅，用真情煮熟，吃一口快乐两口幸福三口顺利然后喝全家健康汤，回味是温馨，余香是祝福。

7.新年到了，想送你点钱，发现你比我能挣；想送你点衣服，发现你比我俏；想送你点吃的，发现你比我能？；想送你点快乐，发现你比我能笑；只好送你四个字：新春愉快！

8.新年到了，这年头，祝福也不好送了，快乐被人打包了，煽情被人赶早了，万事如意跟身体健康也不知道被谁拐跑了，可我的祝福还是送到了。新年愉快！

9.新年的短信，铺天盖地，我怕祝福塞不进去，提前发送，祝你新年欢乐，万事如意！

10.新年的烟花华丽绽放，新年就像一匹奔驰的骏马，驼走了一串难忘的岁月，却奔向一个崭新的华年！我用真心祈愿，愿你在新的一年，红红火火，快乐天天！

11.新年的钟声里，我举起杯，任一弯晶莹的思绪，在杯底悄悄沉淀，深深地祝福你快乐！

12.鞭炮声声辞鼠年，烟花灿烂迎鼠年，新的一年新气象，新的短信新祝福：愿你苦尽甘来好运收，吐气扬眉笑颜展！鼠年新年快乐！

13.大红楹联门上贴，喜庆气息在蔓延；红烛映照微笑脸，团圆感觉心荡漾；美酒飘香醉欢腾，幸福快乐来接力；炮竹噼啪响彻天，瑞安祥和辞旧岁。美妙热闹除夕夜，祝你新年添岁又增福，财源滚滚万年长。

14.大雁往南飞，蚂蚁大搬家，街上唯独你，自己在溜达。头顶张双耳，手掌分两叉，四脚都着地，一走一蹦达。真想问问你，到底是个啥！不管你是啥，新年乐哈哈！

15.当列车开动的时候，滚动着远去的悲喜，也留下了一串串沉重的回忆，还有远方那招手的理想梦想的扑面而来的春光美。敞开心扉吧，拥抱神往的年终岁尾。

一、风儿载着我的思念，云儿传递我的叮咛，阳光聚焦我的关切，雨丝串起我的祝福。天气阴晴不定，温度冷热起伏，母亲节来临之际，愿我的母亲每天好心情！

二、母亲像杯茶，把清香送给我们，把苦涩留给自己；母亲是把伞，把舒适留给我们，把风雨挡在身上；母亲是世上最爱你和最值得你爱的人。愿天下母亲节日快乐。

三、有一种关爱特温馨，有一种牵挂心连心，有一首诗歌游子吟，有一种称谓叫母亲，母亲节来临，短信表我心，感恩春晖明，祝福献母亲。祝妈妈节日快乐！

四、千里试问平安否？且把思念遥相寄。绵绵爱意与关怀，浓浓情意与祝福，母亲节快乐！

五、烛光虽不炙热，但它却柔和。亲情虽不刻骨铭心，但它却深厚。母爱点滴记心头，心中每一份感动，化作一句祝福：妈妈，祝您节日快乐！

六、时光荏苒，我们在母亲的抚爱中成长，让我们永存那份做人的品性在这特别的日子里，祝母亲节日快乐！愿祝福永远围绕在你身边！时时吉祥！刻刻平安！

七、我是从故乡屋檐下飞出的一只小鸟，每一根羽毛成长都凝结着您的深情抚爱和谆谆教导。把无数的思念化做心中无限的祝福，默默的为你祈祷，祝你健康快乐！

八、时光一去不回，河流顺势而下，花开花落随自然，就像您是我生命中不可缺少的人，是您给了我亮丽的生命！祝您和所有天下母亲节日快乐！

九、妈妈，谢谢你赋予我生命，母亲，谢谢你给了我春天般的温暖。在今天属于你的节日里，做儿女的祝你健康长寿。

十、兄弟可以反目；友情可以背叛；爱情可以枯萎；母爱却永无衰竭。母爱恩重如山，我们倾其一生也难以报答。母亲节到了，愿所有的母亲健康快乐！

十一、妈妈：我爱您，如果你是蓝天，我愿做天上的白云；如果你是山，我愿做山上的小树；如果你是海，我愿做海里的鱼，祝妈妈节日快乐。

十二、此时的康乃馨，没有雍容华丽的姿态，没有浓香四溢的味道，只有清清澹澹的样子，就像母亲。母亲节到了，祝福您健康快乐，平安幸福。

十三、离家再远，母亲关切的目光，总能穿越万水千山；离别再久，母亲等候的身影，总在游子梦中。无论身在何处，母亲是我们的支持。预祝母亲节快乐！

十四、岁月的风霜染白了你的头发，染不了的是你爱儿女的心；时间的流逝把你的青春耗尽，耗不完的是你那操劳得劲；妈妈，没有什么比你的爱更伟大！

十五、母爱是山，但比山更高；母爱是海，但比海更深；母爱是天，但比山更广阔；母爱是地，但比地更包容；母亲节：祝全世界所有母亲幸福快乐安康！

纪念“5·12”汶川大地震，同时进一步加强感恩教育，促进我校思想道德建设，巩固德育教育成果，提高学生思想道德素质。根据上级部门文件精神，我校将在九月份开展“感动你我”感恩教育系列活动，现将活动内容安排如下：

(一)感恩教师——给老师写一封信活动

活动内容：每位学生给自己的老师亲手写一封信，并亲手交给老师，收到信的老师需在信上撰写评语，并交还学生。

活动要求：(1)要求结合感恩教育和教师节系列活动，鼓励学生在信中表现出真挚的情感，注重活动的实效性;(2)各班务必在9月12日前上交优秀书信1—2篇，学校将收集优秀书信在校园内以专题展评、朗诵、广播等各种形式对全体学生进行宣传教育，另评选优秀书信上报教育局参评区级优秀书信。

(二)感恩家庭——“四个一”活动

活动内容：结合感恩教育，鼓励学生在家帮助家长做力所能及的家务，要求为父母做一次晚饭，为父母洗一次衣服，为父母捶一次背，为父母打扫一次房间。

活动要求：此活动要求学生在9月26日前完成，各班在9月27日主题班会中进行总结，请班主任保留相关活动资料。

(三)感恩集体——“拾起零碎的希望”活动

活动内容：以班级为单位，将各班废弃品统一收集后变卖，将变卖所得捐献校内助学基金会，助学基金会所得基金直接用于资助品学兼优、经济困难、难以支持学业的部分特困学生，以及突遭意外事件造成巨大经济损失的学生，以帮助他们度过难关，顺利完成学业。

活动要求：要求各班主任利用班会将助学基金的用途及意义对学生进行宣传，让学生了解此活动的意义所在，共同参与到活动中来。

(四)感恩社会——社区实践活动

活动内容：以年级、班级或社团为单位，组织学生在学校所在社区开展形式多样的社会实践活动。

活动要求：(1)各年级、班级或社团负责教师要积极与有关单位联系，确保活动顺利开展，并加强宣传，营造良好氛围;(2)要求活动内容切合主题，注重实效，体现成果;(3)加强管理，确保学生安全;(4)保留相关活动资料并上报学生处。

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

你苍白的指尖理着我的双鬓，我禁不住像儿时一样

紧紧拉住你的衣襟。

啊，母亲，

为了留住你渐渐隐去的身影，虽然晨曦已把梦剪成烟缕，我还是久久不敢睁开眼睛。 我依旧珍藏着那鲜红的围巾，生怕浣洗会使它

失去你特有的温馨。

啊，母亲，

岁月的流水不也同样无情 生怕记忆也一样褪色啊， 我怎敢轻易打开它的画屏? 为了一根刺我曾向你哭喊， 如今戴着荆冠，我不敢， 一声也不敢呻吟。

啊，母亲，

我常悲哀地仰望你的照片，纵然呼唤能够穿透黄土，我怎敢惊动你的安眠?

我还不敢这样陈列爱的礼品，虽然我写了许多支歌

给花、给海、给黎明。

啊，母亲，

我的甜柔深谧的怀念，

不是激流，不是瀑布，

是花木掩映中唱不出歌声的古井。

甲方：

乙方：

一、甲方责任义务：

1. 甲方同意乙方以__市纪友隆进出口有限公司名义对外开展业务活动。

2. 甲方有义务根据乙方的要求对外签订外贸合同，对内与供应商签订购销合同。

合同签订后，即时将合同副本送交乙方。

3. 甲方将无偿为乙方提供谈判场所;

提供通讯便利，但其实际发生的费用应在乙方业务收入中扣减。

无偿提供出口业务及法律法规咨询;按时提供全套公司单证;在乙方指定地点办理海关、商检备案手续。

4.甲方在货物上船后与乙方再次確認提单资料，出正本提单后交给乙方，由乙方自行寄给收货人;如果乙方有特殊說明的除外.

5. 甲方保证维护乙方的商业秘密。

并通过自己的渠道协助乙方扩大业务。

6. 甲方保证乙方运用资金的安全，承诺不挪用，不拖付乙方资金往来，并在安全收汇后2–3个工作日，按照当日牌价结算人民币货款给乙方或由乙方指定的生产厂商。

甲方保证乙方的利润所得，并根据双方商定的时间方式，向乙方支付。

7.如果由于甲方的问题导致货物不能准时出口到港所产生的费用由甲方负责

二、乙方责任义务：

1. 遵守法律和国家外贸、外汇、海关方面的政策。

2. 维护甲方的声誉和利益，遵守甲方及其它双方商定的工作程序。

3. 自行承担自身业务的所有费用。

4. 乙方提供给甲方的相关出货资料必需真实，有效，并具有合法性。

5. 如乙方指定货代以及需异地报关出口的货物，乙方应通知甲方其货代名称、地址、联系人、电话、传真等详细资料，并允许甲方与货代直接联系，在货物正式报关出口前，由货代将装箱单、发票传真给甲方确认

6. 单单结汇。

乙方愿意支付甲方每笔转帐金额的 千分之三，但每票不低于 贰佰元整 ，不高于 壹仟元整 做为手续费，如在转帐过程中产生的银行费用由乙方自行承担。

三、法律责任：

1. 双方必需严格执行本协议，若因外商原因导致外销合同延迟履行、不能完全履行或不能履行时, 至使甲方不能履行本代理协议时, 甲方不承担任何责任。

但在乙方提出书面请求并提供费用协助下, 代理人有义务向外商交涉索赔。

2. 在本合同项下，如一方违约，除依法依约承担违约责任，赔偿责任以及赔偿守约方的实际损失外，还应承担守约方为实现债权而支付的费用，该费用包括但不限于律师费用、诉讼费用、差旅费、通讯费。

3.自违约方违反本合同约定及法定义务之日起,其于后支付的任何款项按以下顺序清偿：

守约方为实现权利支付的费用;

利息或违约金、损失赔偿金;

货款本金。

四、争议解决方式：

1.本合同适用《民法典》及我国对外贸易代理的有关规定。

2.委托代理过程中发生纠纷，由双方协商解决，协商未果的，由合同签订地法院裁决。

五.其它事项：

1.本协议一式两份双方各执一份，具有同等的法律效力. 自双方签字盖章之日起生效，有效期壹年，协议到期停止执行. 但在双方帐务、事务未清之前，协议条款继续生效，如帐务、事务结付完毕此协议条款自行作废，如继续执行，协议重签才有效。

2.甲乙双方在执行过程中，若对本协议上述条款有不同的见解和异议，需经双方协商研究同意后方能够进行修改和补充。

补充或修改的內容应以书面提出并经双方签章后生效，并与本代理出口合同具有同等的法律效力。

甲方：乙方：

法人代表：身份证号：

签订日期： 年 月 日

签订日期：年 月 日

1.滴水之恩，化作涌泉相报;真情大爱，结草衔环回报。感恩节，我想衷心谢谢你，人生的知己，你的一份真情意，我永远不会忘记!愿你一生平安快乐幸福如意。感恩节祝福语我用一分热心二分诚心三分忠心四分爱心五分称心六分喜心七分乐心八分敬心九分倾心十分感恩的心，精心烹制“爱心祝福一锅”，祝感恩节开心!

2.沙粒感谢大海让他乘风破浪，春季感谢时间让他美丽无限，我感谢你让我的人生没有遗憾，感恩节，谢谢我亲爱的每天对我的悉心照料，么么!

3.带着欣赏的眼光看人，带着包容的心做事，带着知足的心生活，带着感恩的心看世界，你会发现世界因你更美好。感恩节，对曾经感动的每一个人，说声谢谢!

4.生活中的美好，一点一滴，记在感恩的心里。在一个个平凡的日子里，感受生命的美妙，感恩上苍的赐予，感谢亲人的关爱，感激朋友的支持。祝感恩节快乐!

5.一年四季不嫌累，一声问候不嫌多，一毛短信不嫌贵，一句祝福不嫌酸，一直关心不嫌烦，一生朋友不嫌长，祝感恩节快乐!

6.直到有一天，当我发现我们都已经渐渐地老去的时候，我才感悟到人世间最珍贵的东西莫过于朋友之间的友谊!朋友，谢谢人生路上曾有你，祝感恩节快乐!

7.今天是感恩节!虽然我不信基督，但我认同感恩，真的感谢上苍让我们相识，但愿我们成为一生的好朋友!祝福你我，亲爱的朋友，愿一起度过这个快乐的节日。

8.有一种关心不请自来;有一种默契无可取代;有一种思念因你存在;有一种孤单叫做等待;有一种沉默不是遗忘;有一种祝福是祝你感恩节愉快!

9.老师，感谢您像泥土一样滋润着我成长，感谢您用浩瀚知识赐予我前行的力量……感恩节快乐!

10.陪着父母把家常聊聊，为妈妈梳梳头，帮爸爸捶捶背，用点点滴滴的行动来报答父母的恩情。电 话代替不了见面的温馨，金钱弥补不了亲情的缺憾。感恩节，用实际行动去报答父母的恩情。

2020外贸年终工作总结

对外贸易亦称“国外贸易” 或“进出口贸易”，简称“外贸”，是一种商品货物的流通方式，做好总结，今天第一范文网小编为大家精心挑选了关于20xx外贸年终工作总结的文章，希望能够很好的帮助到大家。

20xx外贸年终工作总结篇一

周二的会议，的确不尽人意，从我个人的角度来说，对自己这半年的工作总结并不全面，下半年的工作计划也并不清楚。借此机会，再次审视自我，认清自我，同时确立自己明确的工作目标。 从12月底来公司到6月，这段时间的工作总结如下：

1. 刚到公司，前两个月比较茫然，但我一心想着把工作做好，进入工作状态。初来乍到，学习是非常重要的，当然外贸部优秀的同事给了我不少帮助，从熟悉产品到开发新客户，一步步走来，过程虽然艰辛，但结果总是给人鼓舞。通过一系列的培训，产品知识，到电话营销，我知道了作为一个外贸业务员如何开始工作，进入状态，取得订单。开始的两个月，没有任何平台，这是公司对我的考验，也是我自己对自己的考验。就如野外拓展中的“空中抓杠”，只有克服自我，才能真正的成功。到第二个月，从网上大海捞针，到最后重点客户培养，最终出了样品单，虽然金额不多，但是却给了我信心。总结这一单，最重要的是客户积累，培养重点。这一点要得益于平时戴总让我们做客户档案，分析客户，并保持和客户联系的状态。只有这样才清楚自己目前客户的联系状态，进而掌握订单的状态。

2. 从二月份拿到阿里账号，我工作上了一个新的台阶。这里想感谢公司给我这样一个可利用的优质平台，让我客户资源很快上升，并学会如何处理询盘，跟踪客户，并达成订单。三月份太阳能热水器客户开始积累，并取得南非客户的样品单，目前对方还在测试阶段，订单大概要8月份才能确定。总结这一单，并没有什么诀窍可言，最重要的是跟紧客户。虽然只是几百美金的样品单，但是在这个客户身上花了很大心血，记得2月底至3月份每天晚上都会和客户聊天聊到很晚，一般是客户提醒我该休息了，我才下线......正因为如此，客户才如期参观工厂，并顺利下样品单。总而言之，跟客户的感情是需要长期培养，关系好了，机会自然就多了。

3. 4月和5月，我个人的业务都处于低谷期，太阳能电池板的样品单出了4个，热水器出了一个样品单。这段时间，可以说还是处于摸索状态，出单心急，所以每碰到一个客户，我都会花大量的时间和精力对付，也许是白费心思，但觉得是值得的，因为经过这段过程，我能够更好的判断客户的心理状态，判断客户下单的可能性有几成，哪些客户是优质客户。6月份下单的美国affordable solar也是这段时间培养出来的，时间虽然很长，但是最终我看准了这个客户，而且认定是优质客户，终于经过2个多月时间，定金顺利到账。总结这段时间我的付出，当然很多是不值得的，比如有些客户是考察市场，观望行情，这样的客户可以不用花太多的精力，这样的客户不仅难缠，而且很麻烦，问题一大堆，你要不停为他搜集信息，解答问题，到最后，他也不会下单，然后消失。像这样的客户要等他的订单，估计要一年或者两年时间。而美国客户，他问题也很多，根据我的判断，他有单，所以我会很耐心，很细致为他一一解答;因为他有单，我几乎每周都会打电话询问情况，并记录对方的进展，到最后的程度是，对方一接到我电话，听到我的声音，就知道我是浙江华锦的tracy，这个时侯，我就肯定，这个客户下单，一定会下给我。当然结果也是这样的。

4. 6月份，询盘很少，新客户的开发也就比较少，有两三个客户可能会下样品单。同时，跟老客户保持着紧密联系，尤其是出过样品单的客户。可以说，经过半年，我工作进入状态了，老客户差不多积累起来了，只是需要维护好，让样品单客户尽快翻单。同时，客户订单下了之后，配合其他部门，将客户要求反馈给采购部，生产部，以确保订单准时并无差错，赢得客户! 上半年的工作总结大致如综上所述，虽然上半年总的销售额并不理想，主要是因为我客户资源有限，很多客户还处于培养阶段，而下单的客户也都是样品单，样品单金额一般都比较低，这就导致销售额比较低。对于下半年的工作我很有信心，也希望公司对我有信心。

会上我也给自己定了目标，这个目标是要用行动去实现的，而不是空谈。下半年总目标是12万美金。很难细化，每个月能做多少，但是我相信，如果样品单客户维护好，继续翻单，这个任务并不难，甚至可以做得更好。

就目前客户的跟踪情况，7月份的工作目标和计划如下：

1. 顺利处理美国客户订单，70%余款收回，这样7月份至少可以完成3万多美金。当然不能只盯着一个客户。墨西哥客户太阳能电池板样品测试已成功，客户也比较满意，目前正在谈一个小柜的订单，根据和客户的联系情况，以及私人关系，目标7月份拿下订单。对于这样的客户，当然是要像猫盯着老鼠那样，抓紧，不放松，有望7月中旬收到定金。所以给自己7月份的目标是5万美金。

2. 其余每个月的任务，很难细分，因为和客户的进展是在变化化的。希望每月的任务能提前一个月定下来。

3. 还有一个主要的任务，帮助新业务员适应公司，尽早做出业务。目前，只有郑蓉是我负责，我会耐心为她解答工作中遇到的困难，并给予适当的指导，帮助她早日为我们公司外贸业务作出成绩。

我知道，对于工作的计划也许还不让人满意，在我个人的便签纸上面，每一天的计划，都一条条写下来了，每天的计划我相信是为我大的目标服务的，所以会脚踏实地做好。

在公司这半年时间，我有不足的地方，希望同事领导给我提出，我会虚心接受，并改正，争取做得更好。每个公司都有自己的制度，以及管理方式，在努力工作的同时，我也会配合公司的各项制度。对于公司，我也有以下建议：

1. 对待资源资源。在上面的工作总结中，我提到，网络平台是一个很好的资源，有了平台，业务上有了明显的进步，客户积累量也突飞猛进。所以希望公司在资源分配上，尽量做到公平公正，因为这个对每个业务员都狠重要!

2. 对待样品。因为前半年，我出的大都是样品，所以对这一点体会比较深刻，如果样品单客户能培养成定期下单的长期客户，那目标是很容易实现，也为公司的长期客户做出贡献。我提出这一点并不是说我的样品出了问题，相反，我出的样品，客户都比较满意，测试也很不错，所以我希望能继续保持下去。因为样品是客户对我们产品的初步审核，是我们取得订单的关键。 3. 对待来访客户。这一点只是细节，但是希望能引起注意。据我所知，我公司到访客户的下单率，并不理想。相比，我知道的一家工厂，他们公司硬件设备及各方面条件并不如我们公司，而对方到访客户的下单率几乎是100%。探其究竟，工厂对待客户细节等都非常注意。客户到访，无论客户是否下单，都非常尊重。我也希望我们公司对远道而来的客人，表现出东道主的热情，并展示公司良好的企业形象。

这些建议，只是我个人的看法，如果能改进的，希望公司尽力改进，为公司业务，塑造形象而努力。我需要做的就是：为我的目标而努力!!

20xx外贸年终工作总结篇二

20xx年马上就要过去，大部分外贸朋友都苦于写年度总结，在这里我们一起来梳理下，这一年外贸公司多多少少都存在的问题：

企业层面

1，高附加值产品居多，部分出口产品附加值小：产品结构需要调整;

2，外贸人才缺：人才培养跟不上;具备互联网思维和营销思维的人才更是凤毛麟角，身边没有成功转型的案例，造成很多传统老板不敢于尝试新方式;

3，生产企业对产品创新科研投入不够，人才储备不够：造成产品结构单一，竞争力弱;国家是支持外贸创新以及中国品牌的;与高校合作：产学研申报，鼓励高校知识产权部分归个人

4，营销手段单一：主要依靠广交会等传统方式，电子商务以阿里巴巴等传统平台为主，没有建立起立体化的营销体系(交易会+电子商务+大数据)，浪费了大量的商业机会;

5，企业内部管理和激励程度不够：造成很多人才流失，各立山头;

6，外部服务商落地少，本土服务商成长慢：包括阿里巴巴在内服务不能本土化，落地服务少，只是硬卖;很多客户断约，并且对电商造成了心理阴影，不敢于尝试新服务，新方法，新思路;

而针对这些问题，20xx年我们需要做如下改进：

1、一把手工程：老板带头重视：投入资金、精力、人才;

2、找好带头人：有经验、有事业心的经理人;

3、选好产品，做好地产品生产加工企业扶持，找好配套供应商;特别是利用好大学智力，快速实现大学科研成果的商品化，能够降低成本，提高研发和创新的速率;

4、提升队伍战斗力：内训、外训相结合;请进来、走出去;

5、找好服务商：提升公司发展速度;节省时间和成本;

6、利用好政策：针对国家和省市各种政策，积极对接，认真学习，并且合理利用。

7、组建科学、立体化销售体系：利用贸易数据引领国际贸易发展新趋势

20xx外贸年终工作总结篇三

时光荏苒，转眼一年的时间飞逝过去了。20xx年意味着两千年的第一个十年的结束，明年即将是两千年第二个十年的开始，在这辞旧迎新的日子里，回首这一年工作的历程不禁感慨十分。

在这一年里虽然没有取得惊人的成绩，但是其中的曲折和坎坷我是深有体会的。对有一定销售经验的人来说，销售确实不难，但对于一个销售经验不是很丰富，刚从事销售这一行业不到两年的人来说是有一定挑战性的，到现在为止，我不再说自己是一个销售新人，因为我进军到销售这一行业也快一年半的时间，说长不长说短不短，大约540天的时间每天都是在围绕销售这一个中心而展开的。20xx年这一年又快过去了，虽然没有取得斐然的成绩，但是我觉得已经做得对得起自己，每天我没有在虚度光阴无所事事，而是在想方设法怎样做好方案和报价迎来客户，一个业务员要得到公司的肯定那只有销售业绩，这是铁打的事实。为了明年能取得优异的成果，一定再接再厉，做最大的努力去挑战极限，争取明年做到超过预定销售额。

在今年一月份的时候还只刚刚利用阿里巴巴网络销售平台，一个一个上传产品写英文产品描述，由于去年那半年的时间没有实质性的单在跟对产品了解得非常浅显，所以在产品描述阶段利用了比较长的时间，开始没人教尽管不是太难但实际操作起来还是遇到了不少麻烦，全靠自己慢慢摸索出来，怎样把产品描述写好关键词设好。在上季度询盘是非常少的而且收到的询盘也没有多少含金量，即使利用大部分时间比较细致地去回复询盘，结果发现有潜在客户回复得也很少，而且回复得不太详细，实则从那些回复可以看出他们是没有意愿想买。可能只是为了积累一些报价，或用于与其他供应商的报价做比较，这一季度的报价基本都是无用功。在第二季度的时候可能产品比较完善，描述也算比较到位了，慢慢地一些含金量高一点的询盘就来了，在那众多的询盘中你无法得知哪些是有效得询盘，只有每个询盘都认真去对待从而引导潜在客户，他们才会一步一步对你的回复和话题感兴趣，而后会利用他们宝贵的时间在忙碌中开始一天一天回复你的问题。

实际上，只要大部分询盘是含金量较高的就一定会迎来客户来国看厂，这样拿到单的机会就较高。同时，还有一种情况就是客人需要的设备较多金额大，他们于是来国参观几家厂，而我们要在其中脱颖而出让他们选择我们生产的设备，这个有很多因素影响买卖的成功，价格因素，沟通因素，公司其他一些因素。所以成功与否，看实力。没拿到那个单也不要垂头丧气，拿到了也不要沾沾自喜。机会还很多，不过每次都要好好把握。

第三季度基本都是在跟单学做单据，其实这些表面上不难，但是都是些细致活，只要一个地方错了可以让客户清不了关。就拿单单要相符单证要一致来说，公司抬头一定要用对，不要装箱单和商业发票还有原产地证用的不是一个公司的，那么就会出问题了，这只是其中的一例。 第四季度，在11月上旬所幸接到了一个单，本来是打算做完今年辞职了，明年做到四月份的样子如果做不到单就辞职。

因为我知道跟到一个单的最短的时间大概就是3个月的样子。重新给自己制定一个销售计划，其中最不可缺少的就是毅力和勤奋，还有一个坚定的信念。我总是暗示自己单肯定是会有的，只是时间的问题。虽然付出并不一定就有很大的回报，但是有所付出就一定会有得，天上不会自动掉馅饼，只有自己努力去争取才有机会获得成功，成功总是垂青于有准备的头脑，所以作为一个销售员要时刻准备着如何去应对未知。

本协议于_____________年_____________月_____________日在中国_____________由有关双方在平等互利基础上达成，按双方同意的下列条件发展业务关系：_________________

1.协议双方

甲方：_________________

地址：_________________

电话：_________________

传真：_________________

乙方：_________________

地址：_________________

电话：_________________

传真：_________________

2.委任

甲方指定乙方为其独家代理，为第三条所列商品从第四条所列区域的顾客中招揽订单，乙方接受上述委任。

3.代理商品

_____________。

4.代理区域

仅限于_____________

5.最低业务量

乙方同意，在本协议有效期内从上述代理区域内的顾客处招揽的上述商品的订单价值不低于_____________美元。

6.价格与支付

每一笔交易的货物价格应由乙方与买主通过谈判确定，并须经甲方最后确认。

付款使用保兑的、不可撤销的信用证，由买方开出，以甲方为受益人。信用证须在装运日期前15天到达甲方。

7.独家代理权

基于本协议授予的独家代理权，甲方不得直接或间接地通过乙方以外的渠道向_____________顾客销售或出口第三条所列商品，乙方不得在_____________经销、分销或促销与上述商品相竞争或类似的产品，也不得招揽或接受以到_____________以外地区销售为目的的订单，在本协议有效期内，甲方应将其收到的来自_____________其他商家的有关代理产品的询价或订单转交给乙方。

8.商情报告

为使甲方充分了解现行市场情况，乙方承担至少每季度一次或在必要时随时向甲方提供市场报告，内容包括与本协议代理商品的进口与销售有关的地方规章的变动、当地市场发展趋势以及买方对甲方按协议供应的货物的品质、包装、价格等方面的意见。乙方还承担向甲方提供其他供应商类似商品的报价和广告资料。

9.广告及费用

乙方负担本协议有效期内在新加坡销售代理商品做广告宣传的一切费用，并向甲方提交所用于广告的声像资料，供甲方事先核准。

10.佣金

对乙方直接获取并经甲方确认接受的订单，甲方按净发票售价向乙方支付5%的佣金。佣金在甲方收到每笔订单的全部货款后才会支付。

11.政府部门间的交易

在甲、乙双方政府部门之间达成的交易不受本协议条款的限制，此类交易的金额也不应计入第五条规定的最低业务量。

12.工业产权

在本协议有效期内，为销售有关洗衣机，乙方可以使用甲方拥有的商标，并承认使用于或包含于_____________中的任何专利商标、版权或其他工业产权为甲方独家拥有。一旦发现侵权，乙方应立即通知甲方并协助甲方采取措施保护甲方权益。

13.协议有效期

本协议经有关双方如期签署后生效，有效期为_____________年，从_____________年_____________月_____________日至_____________年_____________月_____________日。除非作出相反通知，本协议期满后将延长_____________个月。

14.协议的终止

在本协议有效期内，如果一方被发现违背协议条款，另一方有权终止协议。

15.不可抗力

由于水灾、火灾、地震、干旱、战争或协议一方无法预见、控制、避免和克服的其他事件导致不能或暂时不能全部或部分履行本协议，该方不负责任。但是，受不可抗力事件影响的一方须尽快将发生的事件通知另一方，并在不可抗力事件发生15天内将有关机构出具的不可抗力事件的证明寄交对方。

16.仲裁

因履行本协议所发生的一切争议应通过友好协商解决。如协商不能解决争议，则应将争议提交中国国际经济贸易仲裁委员会(北京)，依据其仲裁规则进行仲裁。仲裁裁决是终局的，对双方都有约束力。

甲方(签字)：_________________乙方(签字)：_________________

年        月          日        年        月          日

1.母亲，是寂寞孤单时温暖的依赖；母亲，是彷徨忧伤时踏实的臂腕；母亲，喜悦快乐时分享的朋友；母亲，是孤独飘荡时心灵的港湾。母亲节，用心祝福母亲节日快乐，健康长伴。

2.手心传递着，您关爱的温度；一字一句间，是声声叮嘱在重复；您弯曲的腰身，背负生活的忙碌；没有索取，只有付出。妈妈的爱，永生难忘。母亲节，祝妈妈幸福！

3.一生要强的妈妈，双手撑起我们的家。如今你的孩儿已经长大，耳边却少不了你的牵挂。你的关心不是浮夸，我已理解你的伟大。母亲节来临，道一声：老妈你幸苦啦

4.妈妈，我愿您快乐多一点，烦恼少一点；健康多一点，伤病不再有；幸福多一点，我不再让你担心。母亲节来到，我只想和您说声：妈，辛苦了！愿您永远健康，永远快乐，永远美丽，永远幸福！

5.当岁月把黑丝染成白发，当风雨在肌肤上印下深痕，当夕阳下的身影逐渐矮小，当电话那头的声音日益微弱，当我们在健康成长，才知道亲爱的妈妈正在变老。母亲节，愿天下母亲幸福安康！

6.很多话，离开了想说给你听，很多事，远离了才记起回忆；很多爱，千山万水仍有牵挂。母亲节到了，祝福妈妈您健康长寿，我会一直想您，念您，爱您，不论我在哪里。

7.母亲像月亮一样，照耀我家门窗，圣洁多慈祥，发出爱的光芒。为了儿女着想，不怕乌云阻挡，赐给我温情，鼓励我向上。在母亲节的这一天，让我再一次的说：妈妈，我爱您。

8.母亲节已到，短信祝福绕，愿妈身体好，儿女心不焦，愿妈没烦恼，精神倍儿好，愿妈别辛劳，凡事往边靠，等儿回家后，何愁事不了。母亲节，祝妈妈身体健康，精神愉快！

9.一双手，托起全家的希望；一双眼，充盈无限的深情；一双脚，写下人世的沧桑；一颗心，盛满了对子女的爱意。我尊敬的母亲，祝您母亲节快乐！

10.母亲的关爱，穿过时空的距离，一直珍藏在心底；母亲的视线，跨越万水千山，一直照耀我的前方。母亲节到了，祝妈妈节日快乐，永远健康。

11.亲爱的妈妈，你是我的骄傲，你是我的榜样，你的温馨体贴，你的百般呵护，你的大公无私，使我时刻牵挂，母亲节日到了，短信叮嘱您，珍重身体，工作适当，笑容常在，愿永美丽。

12.人生短，岁月长。念亲恩，最难忘。乳汁甜，饭菜香。臂弯里，风雨挡。慈母心，像月亮。多呵呼，暖心房。母亲节到，愿母亲健康平安。

13.大爱无言，挚爱喷涌如泉；亲情流淌，甘露滋润心田；母爱无私，付出关爱无限；春晖难报，感激常在心间。母亲节，愿母亲笑颜绽放！

14.飞针走线，用爱编织无尽的思念；缝缝补补，用情填补生活的欠缺。针眼密密，期盼游子归程。母亲节，祝母亲永远闪耀着岁月的光辉！

15.母亲是一本厚书，品不尽的是关爱，叙不完的是亲情，说不出的是感激，带不走的是记忆，读不完的是母爱的连载。祝母亲节日快乐！