外贸感谢用语汇总20篇

教学用语规范工作自查报告

本着进一步提升我校语言文字工作的整体水平，增强广大师生的语言文字规范意识，提高广大师生应用语言文字能力的目的，我们对全校的各项语言文字工作评估进行了一次自查自评，现将有关自查报告情况汇报如下：

一、整章建制，确定工作重点

为使迎评工作能深入、细致、扎实地开展起来，学校于XX年12月10日，调整了临夏回民中学语言文字工作领导小组，成立了以党总支书记马自东为组长，各副校长为副组长，各处室负责同志为成员的领导小组。领导小组下设语言文字工作办公室，副校长何有录任主任，教研室两位主任为副主任。同时配备了专门、兼职干事，确定了工作重点。

1.教务处、教研处、政教处、办公室、总务处等学校各部门认真贯彻落实《国家通用语言文字法》的要求。其中特别是教务处、政教处要将“讲普通话，写规范字”纳入到日常的教育教学、教学常规检查、新教师听、评课等学校各项教学活动中来。且在日常的教育教学活动中认真检查落实。

2.全校上下要在教师中广泛开展学习《国家通用语言文字法》活动，使普通话成为教师的教学语言。

3.使普通话成为学校学生学习和交流的语言。

4.通过宣传、检查、督促使全校师生养成写规范字的良好习惯。

5.要求全校教师向领导小组提交普通话等级证书，语文教师必须100%达到二级甲等，其它学科教师必须达到二级乙等，处室工作人员必须参加临夏州公务员普通话测试，并达到相应的水平。

6.要求学校领导要努力讲普通话，写规范字。

7.特别说明将普通话合格作为对教师进行业务考核和录用新教师的一项硬性指标。

8.教务处应该将写规范字硬性规定到有关教案书写、批改作业、书写评语、板书等常规教学制度中。

9.要召开专门的全校大宣讲、学习有关文件精神及讲明有关要求，使师生们明白学校有关语言文字工作的要求及重点。

10.布置纠错小组积极行动起来，对全校各处的名称牌、标志牌、指示牌、标语牌进行一次全方位的检查，细致落实繁体字、异体字、二简字、错别字纠正问题。

二、存在问题

1.经过对照检查，各部门对“讲普通话，写规范字”以及临夏州二类城市评估验收工作认识还不够到位，尤其是师生们在教育教学活动中讲普通话，写规范字的良好习惯离评分细则还有一定距离。

2.语文教师中有13人普通话等级测试未达到二级甲等标准，其他教师有6人未参加普通话培训及测试，工作人员有3人未参加培训及测试。

3.极个别教师方言较重，还没有把普通话作为教学用语。

4.我校大部分学生来自农村，存在着上课讲普通话，课下讲方言的现象。

5.为创建良好校园文化氛围悬挂的各种宣传条幅、手写体宣传牌还没有制作规范副牌。

6.个别教师批改作业、板书设计中还有使用二简字的现象。

7.公文中还存在着序号、标点及排版等不规范的现象。

8.学生分辨其识字范围内的规范字和不规范字的能力有待进一步提高。

9.学生书写汉字字形、笔顺不规范。

三、整改措施

1.督促教师参加普通话培训测试，力争使语文教师100%达到要求，其它教师80%以上达到要求。

2.在全校范围的常规教学大检查活动中杜绝使用汉字不规范的现象，牢固树立写规范字的意识。

共2页，当前第1页12

交通银行出口买方信贷贷款合同

借款方：_____________________

法定地址：___________________

贷款方：_____________________

法定地址：___________________ 应借款方_______年_______月_______日的借款申请，贷款方同意为其安排______________银行（下称“出口地银行”）的买方信贷。为此，借、贷双方根据《中华人民共和国民法通则》、《中华人民共和国经济合同法》、《借款合同条例》签订合同，以资遵守。 第一条 贷款用途和金额

1.1 本贷款用途是为出口商______________与进口商______________在_______年_______月_______日签订的商务合同（合同编号：________）融通资金，用于进口商为______________项目，购买______________设备。

1.2 贷款总金额为：_______（大写：______________），其中：____________________________

（1）用于商务合同项下支付的金额为_______（大写：_______），为商务合同金额的_______％。

（2）用于付给_______的本贷款保险费的金额为_______（大写：_______）

（3）

1.3________________________________ 第二条 提款条件

2.1 借款方根据商务合同的有关规定提款。

2.2 借款方满足了本合同第六条列明的各项陈述与保证。

2.3 借款方未发生本合同第七条列明的任何一种违约行为。

2.4 _______________________________ 第三条 提款

3.1 借款方在收到商务合同支付条款规定的有关文件和单据，并按规定时间审核无误以后指示出口地银行将贷款直接支付给出口商。

3.2 提款期从______________开始，至______________截止，过期______________

3.3 每次提款最小金额为_______（大写：______________）

3.4 提款的日期、金额及有关事项在每次提款发生后，由贷款方编制《提款通知书》（格式见样本1）通知借款方。《提款通知书》为本合同不可分割的部分，具有同等的法律约束力。

3.5______________________________ 第四条 利息和费用

4.1 借款方必须无条件的，没有任何扣除的按本合同规定向贷款方支付利息和下列条款费用。

4.2 贷款按_______利率计息。年利率为_______，一年按360天计算。

贷款金额的_______％即______________（大写：_______）按固定利率计息，年利率为_______，一年按360天计算。

还款期以前的利息每_______个月计收一次。每期利息支付的日期、金额及其有关事项由贷款方在《提款通知书》中通知借款方。

还款期的利息每_______个月计收一次。每期利息支付的日期、金额及有关事项由贷款方编制《还款通知书》（格式见样本2）通知借款方。《还款通知书》为本合同不可分割的部分，具有同等的法律约束力。

4.3 承诺费费率为_______％。承诺费自_______开始按末提贷款余额计算、支付，以后_______每_______个月计付一次。

4.4 管理费率为_______％。管理费自_______内按贷款总金额计算，一次付清。

4.5 本贷款保险费____________________________

4.6 每次支付利息和费用，借款方必须在支付日前的三个营业日将款项划入其开立在贷款方处的帐户上。

4.7___________________________ 第五条 还款

5.1 借款方必须无条件地按本合同规定偿还贷款，并且不受商务合同项下进、出口双方任何行为的影响。

5.2 本贷款还期为_______年，每_______个月等额偿还一次，分_______次还清。还款期从____________开始，其开始日最迟不超过_______每次还款的日期、金额及有关事项由贷款方在《还款通知书》中通知借款方。

5.3 借款方必须在还款前_______个月通知贷款方，并征得贷款方同意后可以不按《还款通知书》的规定提前归还贷款，并承担由此引起的贷款方的一切经济损失。

5.4 每次还款，借款方必须在还款日前的三个营业日将款项划入其开立在贷款方处的帐户上。

5.5___________________________ 第六条 陈述与保证

6.1 借款方在贷款方处开立结算帐户。借款方日常经营的资金通过该帐户结算。贷款方可以主动从该帐户划转资金用于偿还、支付本贷款项下到期的贷款、利息和各项费用。

借款方在贷款方处开立还款保证帐户。借款方将下列资金存入该帐户。在本贷款项下的所有债务和费用偿付清以前，未经贷款方同意不得挪作他用。存入该帐户的资金是：

1.__________________________________

2.__________________________________

3.__________________________________

6.2 借款方定期向贷款方提供项目进度报告；按月向贷款方报送资产负债表，损益表，财务收支表以及贷款方认为必要的其他文件和资料，借款方向贷款方提供的一切文件和资料是真实的。

6.3 借款方未隐瞒向第三方作出的任何信用担保，财产抵押以及其他影响借款方还款能力的行为。

在本合同有效期间，未经贷款方同意，借款方不得为第三方承担任何债务或对借款方的资产设定任何抵押以及作出其他影响还款能力的行为。

6.4 借款方在财务、经营方面的重大决定、重大变化须及时通知贷款方。当这些重大决定影响贷款方权益时，须事先征得贷款方的同意。

6.5 借款方在组织章程、管理制度和人事等方面的重大决定或重大变化须及时通知贷款方，当这些决定或变化影响到贷款方权益时，事先征得贷款方的同意。

6.6 _______________________________ 第七条 违约和处罚

7.1 下列任何事件发生，借款方必须承担由此引起的贷款方的一切经济损失，并且，贷款方有权提前收回贷款本息和处以下列注明的罚息以及采取其他一切处罚和补救措施，由此引起的贷款方的一切经济损失由借款方承担：

1.借款方未能按本合同规定的用途使用贷款。

贷款方对被挪用的贷款在原定利率的基础上加收50％的罚息。

2.借款方未能按本合同规定偿还贷款，支付利息和费用。

贷款方对逾期的本金、利息和费用加收_______％的罚息。

3.借款方未能满足本合同第六条陈述与保证的各项规定。

4.借款方改组、解散、终止其业务经营，资产负债及损益状况发生贷款方认为的重大不利变化。

5.借款方提供的抵押物已经失去其抵押价值，贷款方认为其权益受到损害。

6.担保人已经失去其担保能力或担保人提供的保函由于任何原因被取消，终止，以及更改后而产生相反效果，贷款方认为其权益受到损害。

7.借款方与第三方发生贷款方认为其权益受到损害的诉讼行为。

8.借款方发生贷款方认为其权益受到损害的借款方不按其与第三方签订的借贷合同偿还第三方债务的行为。

9._______________________________ 第八条 生效及其它

8.1 本合同经双方签署后生产，至本合同项下的全部债务、费用和借款方必须支付的一切赔偿、罚款被清偿后失效。

8.2 本合同有效期内，未经借贷双方同意，任何一方对本合同的修改无效。

8.3 本合同壹式肆份，借贷双方各执两份。 第九条 附则

___________________________________  附件1提款通知书 借款人：______________ 我行根据贷款合同（合同编号：______________）第三条和第四条规定，通知你方：你方已于__________年_____月_____日支付出口商第_____笔贷款，金额为__________（大写：__________）。 自本通知书发出时止，你方提款，计付息情况如下： 一、提款情况

币种：__________

提款序号提款日期提款金额累计提款金额第一次 年 月 日  第二次 年 月 日  第三次 年 月 日  第四次 年 月 日  第五次 年 月 日   二、还款期以前利息计付情况 年利率为：__________

币种：__________

付息序号 付息日期付息金额累计付息金额第一次   第二次   第三次   第四次   第五次   第六次    其他事项如下：

1.___________________________________

2.___________________________________

3.___________________________________

附件2还款通知书 借款方：__________ 我行根据贷款合同（合同编号：__________）第四条和第五条规定，现通知你方每次偿还贷款本金和支付还款期利息的日期、金额如下： 年利率为：_______________

币种：__________

序号还本付息日期本金利息本息合计1  2  3  4  5  6  7  8  9  10  11  12  13  合计   其他事项如下：

1.______________________________

2.______ _______________________

3.______________________________

我是在十堰市对外贸易公司实习的。

一、国际贸易

(一)国际贸易(internationaltrade)国际贸易亦称"世界贸易"，泛指国际间的商品和劳务(或货物、知识和服务)的交换。它由各国(地区)的对外贸易构成，是世界各国对外贸易的总和。国际贸易在奴隶社会和封建社会就已发生，并随生产的发展而逐渐扩大。到资本主义社会，其规模空前扩大，具有世界性。

(二)对外贸易(foreigntrade)对外贸易亦称"国外贸易"或"进出口贸易"，是指一个国家(地区)与另一个国家(地区)之间的商品和劳务的交换。这种贸易由进口和出口两个部分组成。对运进商品或劳务的国家(地区)来说，就是进口；对运出商品或劳务的国家(地区)来说，就是出口。这在奴隶社会和封建社会就开始产生和发展，到资本主义社会，发展更加迅速。其性质和作用由不同的社会制度所决定。

二、国际贸易和对外贸易

(一)、国际贸易(internationaltrade)国际贸易亦称世界贸易，泛指国际间的商品和劳务(或货物、知识和服务)的交换。它由各国(地区)的对外贸易构成，是世界各国对外贸易的总和。国际贸易在奴隶社会和封建社会就已发生，并随生产的发展而逐渐扩大。到资本主义社会，其规模空前扩大，具有世界性。

(二)、对外贸易(foreigntrade)对外贸易亦称国外贸易或进出口贸易，是指一个国家(地区)与另一个国家(地区)之间的商品和劳务的交换。这种贸易由进口和出口两个部分组成。对运进商品或劳务的国家(地区)来说，就是进口；对运出商品或劳务的国家(地区)来说，就是出口。这在奴隶社会和封建社会就开始产生和发展，到资本主义社会，发展更加迅速。其性质和作用由不同的社会制度所决定。

三、对外贸易与国际贸易商品结构：

对外贸易商品结构是指一定时期内一国进出口贸易中各种商品的构成，即某大类或某种商品进出口贸易与整个进出口贸易额之比，以份额表示。国际贸易商品结构是指一定时期内各大类商品或某种商品在整个国际贸易中的构成，即各大类商品或某种商品贸易额与整个世界出口贸易额相比，以比重表示。为便于分析比较，世界各国和联合国均以联合国《国际贸易商品标准分类》(sitc)公布的国际贸易和对外贸易商品结构进行分析比较。一国对外贸易商品结构可以反映出该国的经济发展水平、产业结构状况、科技发展水平等。国际贸易商品结构可以反映出整个世界的经济发展水平、产业结构状况和科技发展水平。

四、对外贸易值与对外贸易量：

(一)、对外贸易值(valueofforeigntrade)对外贸易值是以货币表示的贸易金额。一定时期内一国从国外进口的商品的全部价值，称为进口贸易总额或进口总额；一定时期内一国向国外出口的商品的全部价值，称为出口贸易总额或出口总额。两者相加为进出口贸易总额或进出口总额，是反映一个国家对外贸易规模的重要指标。一般用本国货币表示，也有用国际上习惯使用的货币表示。联合国编制和发表的世界各国对外贸易值的统计资料，是以美元表示的。把世界上所有国家的进口总额或出口总额用同一种货币换算后加在一起，即得世界进口总额或世界出口总额。就国际贸易来看，一国的出口就是另一国的进口，如果把各国进出口值相加作为国际贸易总值就是重复计算。因此，一般是把各国进出口值相加，作为国际贸易值。由于各国一般都是按离岸价格(fob即启运港船上交货价，只计成本，不包括运费和保险费)计算出口额，按到岸价格(cif即成本、保险费加运费)计算进口额。因此世界出口总额略小于世界进口总额。

(二)、对外贸易量(quantumofforeigntrade)以货币所表示的对外贸易值经常受到价格变动的影响，因而不能准确地反映一国对外贸易的实际规模，更不能使不同时期的对外贸易值直接比较。为了反映进出口贸易的实际规模，通常以贸易指数表示，其办法是按一定期的不变价格为标准来计算各个时期的贸易值，用进出口价格指数除进出口值，得出按不变价格计算的贸易值，便剔除了价格变动因素，就是贸易量。然后，以一定时期为基期的贸易量指数同各个时期的贸易量指数相比较，就可以得出比较准确反映贸易实际规模变动的贸易量指数。

五、贸易条件(termsoftrade)贸易条件又称交换比价或贸易比价，即出口价格与进口价格之间的比率，也就是说一个单位的出口商品可以换回多少进口商品。它是用出口价格指数与进口价格指数来计算的。计算的公式为：出口价格指数/进口价格指数x100、以一定时期为基期，先计算出基期的进出口价格比率并作为100，再计算出比较期的进出口价格比率，然后以之与基期相比，如大于100，表明贸易条件比基期有利；如小于100，则表明贸易条件比基期不利，交换效益劣于基期

六、服务贸易根据关贸总协定乌拉圭回合达成的"服务贸易总协定"，服务贸易是指："从一成员境内向任何其他成员境内提供服务；在一成员境内向任何其他成员的服务消费者提供服务；一成员的服务提供者在任何其他成员境内以商业存在提供服务；一成员的服务提供者在任何其他成员境内以自然人的存在提供服务。"服务部门包括如下内容：商业服务，通信服务，建筑及有关工程服务，销售服务，教育服务，环境服务，金融服务，健康与社会服务，与旅游有关的服务娱乐、文化与体育服务，运输服务。

七、直接贸易与间接贸易

(一)直接贸易(directtrade)直接贸易是"间接贸易"的对称，是指商品生产国与商品消费国直接买卖商品的行为。

(二)间接贸易(indirecttrade)间接贸易是"直接贸易"的对称，是指商品生产国与商品消费国通过第三国进行买卖商品的行为。其中，生产国是间接出口；消费国是间接进口；第三国是转口。转口贸易(entrepottrade)是指生产国与消费国之间通过第三国所进行的贸易。即使商品直接从生产国运到消费国去，只要两者之间并未直接发生交易关系，而是由第三国转口商分别同生产国与消费国发生的交易关系，仍然属于转口贸易范畴。

八、总贸易与专门贸易

(一)总贸易(generaltrade)总贸易是"专门贸易"的对称，是指以国境为标准划分的进出口贸易。凡进入国境的商品一律列为总进口；凡离开国境的商品一律列为总出口。在总出口中又包括本国产品的出口和未经加工的进口商品的出口。总进口额加总出口额就是一国的总贸易额。美国、日本、英国、加拿大、澳大利亚、中国、原苏联、东欧等国采用这种划分标准。

(二)专门贸易(specialtrade)专门贸易是"总贸易"的对称，是指以关境为标准划分的进出口贸易。只有从外国进入关境的商品以及从保税仓库存提出进入关境的商品才列为专门进口。

外贸公司的实习报告 篇3

我于20__年____日到__月__日去上海____实业有限公司进行实习，该公司是以铜为主的国际贸易公司，公司主要从智利进口,然后在国内转销。该公司由两个业务部一个财务部组成了贸易主体，我就是在其中一个业务部门进行实习的，这个业务部主要负责现货铜的交易。

实习的第一天，__总介绍业务部的小x给我认识，我以后就作为小潘的业务助理来工作了。

由于是铜进口为主的贸易公司，所以对铜要有一定的认识，所以到那里的第一天，我就对此进行了学习，了解了各种铜的成分和规格。铜期货合约标的物在97年9月之前实行的质量标准是gb466-82标准,交割品是一号铜,97年9月-98年8月gb466-82与gb/t-467-1997两种标准同时执行,98年9月起全部执行gb/t467-1997标准,高纯阴极铜和标准阴极铜均可交割,没有质量升贴水,只有品牌升贴水。 高纯阴极铜(cu-cath-1)化学成份 ：cu+ag不小于99.95，杂质总含量不超过0.0065(杂质分类含量略)。

然后，小x给了我一些有关进出口贸易、商检、报关、进口、管理等政策法规，让我对贸易，特别是进口贸易有了一定的认识，他先拿出一些公司以前的信用证和合同副本让我仔细阅读，接着给我仔细讲解翻译了信用证上的每一项条款。我发现信用证上的内容基本上是照搬合同，其中有贸易双方必须重点关注的，如货描等内容，但也有一部分内容银行关注就可以了。

随着阅读的深入，我发现信用证里频繁出现一些单词和短语甚至句子，我将它们一一总结下来，在心里记住。其中还出现了好几种价格，这让我迷惑不已，经小潘解释，我才知道，商业发票中的价格=议付价格=暂定价格=出口商根据当时期货行情得出的价格，进口商据此支付关税、增值税，进口商点价后，出口商出具最终发票，据最终发票金额+利息-商业发票价格进行结算。而点价一般应基于铜现货价再加上其升水，并且一般规定买方只有在卖方收到可接受信用证或保证金后方可点价。

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

1、感激不尽养育意，恩同山岳难忘记，母爱无言化细雨，爱撒人间润大地。祝愿老人好身体，福寿年高有活力，母慈子孝扬正气，亲情无价且珍惜。

2、不要浮华感叹，不要赞美语言，母爱是世上最无私的情感，是儿女一生最大福田，儿女一生一世也无法偿还。感恩母爱孝敬母亲，让孝心催开母亲的笑脸!

3、妈妈，谢谢您，挺着疼痛的肚子，冒着生命危险把我生下;也谢谢您把我从小带到大;妈妈，谢谢您教我学会了走路;也教我学会了说话;妈妈，谢谢您的嘘寒问暖，谢谢您的唠叨，谢谢您的警告，谢谢您给了我的生命!谢谢您!我的好妈妈!

4、母爱犹如天上月，照在我心间。长夜空虚枕冷夜半泣，路遥远碧海示我心，只要爱心柔善像碧月，常在心里问何日报。妈妈，我永远爱你!

5、岁月染白了你的头发;光阴侵蚀了你的健康;时间却始终无法改变那双充满渴望的眼睛，希望自己的子女生活得幸福美好。母亲节到了，身为人子，诚恳祝愿母亲身体健康，天天快乐!

6、母爱是一片树林，遮风挡雨伴我安寝;母爱是一把古琴，悠扬弹奏给我温馨;母爱是一潭__，香甜如蜜任我细品。把爱化成一条短信，感谢我们敬爱的母亲。

7、用母爱哺育了我的魂魄和躯体，您的乳汁是我思维的源泉，您的眼里系着我生命的希冀。我的母亲，我不知如何报答您，祝您健康长寿!

8、不管您在忙什么，您每次接到我电话都开心地像个孩子，对不起，妈，请原谅女儿的不孝，不能陪在您身边!

9、一心一意为全家，两只巧手美如花，三番劳累让您受，四方如意才心安，五福临门今日送，六六顺心是心情，七窍玲珑是您心，母亲节今年来到，愿您事事皆如意!

10、一双手，托起全家的希望;一双眼，充盈无限的深情;一双脚，写下人世的沧桑;一颗心，盛满了对子女的爱意。我尊敬的母亲，祝您母亲节快乐!

11、母亲节到了，看看母亲一丝丝银色的白发，那是操劳的痕迹;瞅瞅母亲一条条渐深的皱纹，那是岁月的蹉跎;母亲节祝安康长寿、幸福无疆。

12、母亲的名字是在土壤里孕育的，我是希望中的树苗;母亲的名字是在天空中孕育的，我是欲翱翔的雏鹰，母亲的名字是在我心中孕育的，我是您永远的孩子。

13、养育我们的艰辛是刻在您额上的条条皱纹，培育我们的困苦是染在您头上的丝丝银发，您用爱心让我们度过欢乐童年，您用慈心伴随我们成长。我爱你—母亲!

14、窗外没有轻风，我很惆怅;窗外没有明月，我很失望;轻风不寄真情，明月难托思念句子大全。幸好我有短信。短信内容：母爱天下最为真，人人自知何须陈。收信人：母亲。

15、母亲节到了，写一条短信，祝愿母亲快乐健康陪伴一生;唱一首歌曲，献给伟大的母亲，表达自己的孝心。祝母亲永远健康、永远快乐、永远幸福。

16、母亲节到，发条短信，祝福母亲，愿母亲：多一点开心，少一点烦心，多一点快乐，少一点忧愁，多一点笑容，少一点痛苦，祝母亲开心，快乐一生。

17、儿女的脚步走的再远，也走不出母爱的呵护。儿女的行程再长，母亲的腿也能丈量。我们走不出母亲的心、母亲那如海的爱。祝天下的母亲永远年轻快乐。

18、您没有百合花的香甜，却沁人心田;您没有牡丹花的笑脸，却夺目灿烂;您用一生的情感为我撑起温暖的蓝天，我愿用一生的爱放在您身边，妈妈节日快乐!

19、母爱不是花香，花儿落了一片荒凉;母爱不是阳光，阳光会被云朵阻挡;母爱是毛衣，穿在身上挡寒凉;母爱是干粮，安抚儿女饥肠。母爱实实在在永恒绵长!

20、母爱，我想用鲜花诉说，诉说我对母亲的感恩;母爱，我想用拥抱表达，表达我与母亲的血肉相连;母爱，我想用烛光祝福，祝福母亲健健康康，平平安安!

货物进口合同样本

□ cif或cfr

cif and cfr

卖方须按时在装运期限内将货物由装运港装船到目的港。在cfr术语下，卖方应在装船前2天电传/传真/电报买方合同号、品名、发票价值及开船日期，以便买方安排保险。

the sellers shall ship the goods duly within the shipping duration from the port of shipment to the port of destination . under cfr terms , the sellers shall advise the buyers by cable/fax/telex of the contract no. , commodity , invoice value and the date of despatch two days before the shipment for the buyers to arrange insurance in time.

□ ddu

卖方须按时在装运期限内将货物由装运港装运至目的港。

the sellers shall ship the goods duly within the shipping duration from the port of the port of destination .

□

14.装运通知

shipping advice :

一件装载完毕，卖方应在____小时内电传/传真/电报买方合同编号、品名、已发运数量、发票总金额、毛重、船名/车/机号及启程日期等。

the sellers shall immediately upon the completion of the loading of the goods , advise buyers of the contract no., names of commodity , loading quantity , invoice values , gross weight , name of vessel and shipment date by tlx/fax/cable within _____hours .

15.质量保证：

quality guarantee :

货物品质规格必须符合本合同及质量保证书之规定，品质保证期为货到目的港_____个月内，在保证期限内，因制造厂商在设计制造过程中的缺陷造成的货物损害应由卖方负责赔偿。

the sellers shall guarantee that the commodity must be in conformity with the quality and specifications specified in this contract and letter of quality guarantee .the guarantee period shall be months after the arrival of the goods at the port of destination , and during the period the sellers shall be responsible for the damage due to the defects in designing and manufacturing of the manufacturer.

16.商品检验：卖方须在装运前_____日委托 检验机构对合同之货物进行检验并出具检验证书，货到目的港后，由买方委托____检验机构进行复检。

goods inspection : the sellers shall have the goods inspected by inspection authority days before the shipment and issued the inspection certificate . the buyers shall have the goods reinspected by inspection authority after the goods arrival at the destination.

17.索赔

claims:

如经中国_____检验机构复检，发现货物有损坏、残缺或品名、规格、数量及质量与本合同及质量保证书之规定不符，买方可于货到目的港后 天内凭上述检验机构出具的证明书向卖方要求索赔。如上述规定之索赔期与质量保证期不一致，在质量保证期限内买方仍可向卖方就质量保证条款之内容向卖方提出索赔。

the buyers shall lodge claims against the sellers based on the inspection certificate issued by china inspection authority days after the arrival of the goods at the destination , if the goods are found to be damaged , missing or the specifications , quantity, and quality not in conformity with those specified in this contract and letter of quality guarantee . in case the claim period above specified is not in conformity with the quality guarantee period, during the quality guarantee period, the buyers have rights to lodge claims against the sellers concerning the quality guarantee.

共5页，当前第3页12345

(1)坚持理论联系实际 将《商务英语谈判》〈国际贸易单证〉《英语口语》等课程中所学到的基础理论和基本政策加以具体运用。力求做到理论与实践、政策与业务有效地结合起来，不断提高分析与解决实际问题的能力。认真观察业务流程，积极和同事交流 虚心请教学习，学习与客户沟通，开发市场。

(2)加强英语的学习 对于外贸专业人员而言，不仅要掌握一定的专业知识，而且还必须会用英语与外商沟通、谈判及函电等。如果专业英语知识掌握不好，就无法开展工作，甚至会影响业务的顺利进行。因此，在实习中大胆与客户交流，边巩固所学知识，边学习工作中遇到的外贸英语知识，掌握外贸专业术语基础。

(3)注意本课程同其他相关课程的联系 外贸英语是一门综合性的学科，与其他课程内容紧密相联。应该将各们知识综合运用。比如法律，比如商品学 比如营销学，在实习期间发现这些对开展工作的用处很大，这就要求我们广泛博览其他相关学科的书籍，多和同事、上级沟通 关注外贸当面的新发展，不断提高业务能力。

(4)坚持学以致用 外贸英语是一门实践性很强的应用学科。实习中深有体会，许多书本中学的东西想要发发挥其作用 需要广泛积极的应用于外贸交流中，处理工作事务中学习到很多书本没有讲的知识 ，可见 学以致用在这门学科里的重要性。基本的业务 流程 就得从找客户开始。寻找客户是一门颇深的学问，要下一番苦功夫才行，运气好的另当别论。当然要回答客户的问题，给客户报价等应该要具备一些基本的 国际贸易 知识。我上个学期学的 国际贸易 实务让我对 国际贸易 方面的 术语 并不陌生。目前为止，虽然自我感觉有些客户稍有眉目，但是稍一不慎就前功尽弃。只有找到了客户，下了订单，签订了合同，才有后面一系列制单结汇等 流程 。由于本人才疏学浅，目前尚属初级阶段――找客户阶段。

实习总结

我通过一段时间的摸索摸索，总结出摆正心态的重要性 ，冷静分析，从自身查找原因，采取有效措施。树立一个辩证的挫折观，保持自信和乐观的态度，正是失败本身才最终造就了成功。学会自我宽慰，能容忍挫折，要心怀坦荡，情绪乐观，善于化压力为动力，改变内心的压抑状态，以求身心的轻松，重新争取成功。 接待客户，收发处理邮件 制发文件等工作要做到积极主动，认真 负责。 还有与领导谈话要注意言语场合 ，正确理解领导意图。

通过实习，加深了我对外贸英语知识的理解，提高了我的实践能力，掌握了更为实际的外贸知识，锻炼了办事能力，了解了社会。 通过实习，发现了自己的不足，我会在以后的工作学习中更加努力，取长补短，需心求教。相信自己会在以后的工作中更加用心，表现更加出色!不管从事什么工作都会努力! 对于公司的不足，暂时还没什么想法，可能是自己观察不够。以后我会在这方面有所留心，争取多发现问题，解决问题，有好的想法会及时和大家交流。

工作中也会遇到一些问题的，遇到的问题及建议解决方案与上司沟通不好;版权归属原作者上司给的某份工作感觉无从下手;谢谢合作。对琐碎重复的工作感到厌倦。

在XX年，我希望自己能掌握更多业务能力，当我们能独挡一面的时候，相信也会是公司壮大的时候。来年的我们都会越来越好!

这星期车间的员工都提前放年假回家了，剩下我们办公室的十来个同事。说真的谁不想快点回家过年哟，不过因为公司的工作安排，我们只好乖乖地留在继续工作到最后一刻。

这星期陆陆续续地收到几个来自阿里巴巴网站的询盘，经过对询盘的分析，包括客户来自哪个国家，感兴趣的产品，购买动机以及其他的特殊要求等，然后才能更有针对性给客户做报价。这可不是一个简单的过程，一个较为完整的报价表包含很多要素，包括品名、型号、交货日期、付款方式以及一些关于产品的基本的技术参数等等。还好这些报价的知识之前在学校有学过，操作起来还算熟悉。最让我头痛的是经常遇上一些特挑剔的客户，问到很多很细节的关于的产品技术参数，我也不懂，唯有硬着头皮去请教我的工程师老板。我这老板脾气特不好，每次问上他都会被训的，在这过程中我锻炼很好的心理素质(有道理的我尽管听进去，没理的就当耳边风)。

各部门、科室：

20xx年7月28日下午3点多钟，组立36米东行车厂家正在安装调试20T新行车，由于高处作业过程中未采取安全监护和警戒措施，内业科拼板划线人员在下面作业，行车上一直径大约在18CM的轴承突然从该行车高处发生坠落，我作业人员距离坠落点约80CM左右，情况十分危险，行车安装交叉作业，我部门强调必须对作业点进行警戒并落实地面人员进行监护，但设备科对这一要求没有与安装单位很好地予以落实，与员工生命安全而不顾，险些酿成大祸，为了加强对公司的安全生产管理，保护员工生命和公司财产安全，根据安全生产责任制的规定要求，安环部责成设备科立即停止外单位的设备安装工作，待条件成熟后由安环部设备科共同组织验收，符合条件后再进行施工安装，同时，对设备科主要负责人赵小炎给予100元的经济处罚，并要求设备科对安装单位落实相应处罚。通过本次事故，希望公司各部门以安全为天职，牢记安全责任，工作不忘安全，认真履行安全职责，为确保公司财产安全和员工生命安全尽心尽职，为公司安全发展多做贡献。关于事故处理通报范文由第一范文网提供!

安环部

20xx.7.28

一、公司简介

这家企业主要是从事代理方面的事情，涉及很多产品。其中涉及到出口的就有农药化肥等。涉及进口的有废机电，废旧金属等。

二、业务总结

第一天来到公司,师傅安排了一张办公桌给我，又给了我几张信用证让我先看看。原来信用证是这样的，和我以前脑子里的模样差不多。那些以前只有在书上看到的名词一一在我眼前展现，看的兴致起处好似刘姥姥进了大观园一般。师傅是一个和蔼的中年妇女，对我非常客气，她非常耐心地教了我制单的基本常识，我所有的疑难困惑她也是有问必答，并对我犯的错误常常能宽容地接受，而不加以责骂。还有其他同事也给予我很大的帮助。

实习期间经历的业务主要有进口废机电，废旧金属等。在签订一笔业务时，作为进口的代理方要与委托方签订一个代理合同，合同规定了进口商品的品名、单价、数量、装运期限、运输方式、运输保险费用负担、交货地点、合同的履.

实习要求：在具体的商业活动中能掌握主要的业务技能。

实习内容：根据相关的国际贸易法律与惯例，结合我过的实际情况与国际贸易实践，以出口贸易的基本过程为主线，以模拟设定的具体出口商品交易作背景，针对出口贸易中业务函电的草拟、商品价格的核算、交易条件的磋商、买卖合同的签订、出口货物的托运订舱、报验通关、信用证的审核与修改以及贸易文件制作和审核等主要业务操作技能。

实习目的：培养我们的自学和动手能力、理解能力以及思维能力。通过进出口贸易模拟实习，让我们能够在一个仿真的国际商业环境中切身体会商品进出易的全过程，能够在实际业务的操作过程中使其全面、系统、规范地掌握从事进出易的主要操作技能。

总结：

经过了两周的贸易实务实习，让我们了解到商务工作挺复杂的，而且在此工作中要有忍心、恒心、信心。

实习中，我们在模拟的商务活动中，有十五个主要业务操作，针对这些操作每天都有不同的心得体会，而且发现了不同的问题，可以说在是受益非浅。

国际贸易的中间环节多，涉及面广，除交易双方当事人外，还涉及商检、运输、保险、金融、车站、港口和海关等部门以及各种中间商和代理商。如果哪个环节出了问题，就会影响整笔交易的正常进行，并有可能引起法律上的纠纷。另外，在国际贸易中，交易双方的成交量通常都比较大，而且交易的商品在运输过程中可能遭到各种自然灾害、意外事故和其它外来风险。所以通常还需要办理各种保险，以避免或减少经济损失。

我在此次实习中，了解到实习的具体做法：

(1)贯彻理论联系实际的原则

在学习本课程时，要以国际贸易基本原理和国家对外方针政策为指导，将《国际贸易》、《中国对外贸易概论》等先行课程中所学到的基础理论和基本政策加以具体运用。教师在讲课过程中，对涉及到的内容，可有针对性地带领学生回顾一下，力求做到理论与实践、政策与业务有效地结合起来，不断提高分析与解决实际问题的能力。

(2)注意业务同法律的联系

国际贸易法律课的内容同国际贸易实务课程的内容关系密切，因为，国际货物买卖合同的成立，必须经过一定的法律步骤，国际货物买卖合同是对合同当事人双方有约束力的法律文件。履行合同是一种法律行为，处理履约当中的争议实际上是解决法律纠纷问题。而且，不同法系的国家，具体裁决的结果还不一样。这就要求从实践和法律两个侧面来研究本课程的内容。

(3)加强英语的学习

对于外贸专业人员而言，不仅要掌握一定的专业知识，而且还必须会用英语与外商交流、谈判及写传真、书信。如果专业英语知识掌握不好，就很难胜任工作，甚至会影响业务的顺利进行。因此，在实习中要求我们加强英语的学习，掌握外贸专业术语基础。

(4)注意本课程同其他相关课程的联系

国际贸易实务是一门综合性的学科，与其他课程内容紧密相联。应该将各们知识综合运用。比如讲到商品的品质、数量和包装内容时就应去了解商品学科的知识;讲到商品的价格时，就应去了解价格学、国际金融及货币银行学的内容;讲到国际货物运输、保险内容时，就应去了解运输学、保险学科的内容;讲到争议、违约、索赔、不可抗力等内容时，就应去了解有关法律的知识等等。

(5)贯彻“洋为中用”的原则

为了适应国际贸易发展的需要，国际商会等国际组织相继制定了有关国际贸易方面的各种规则，如《国际贸易术语解释通则》、《托收统一规则》、《跟单信用证统一惯例》等。这些规则已成为当前国际贸易中公认的一般国际贸易惯例，被人们普遍接受和经常使用，并成为国际贸易界从业人员遵守的行为准则。因此，在学习本课程时，必须根据“洋为中用”的原则，结合我国国情来研究国际上一些通行的惯例和普遍实行的原则，并学会灵活运用国际上一些行之有效的贸易方式和习惯做法，以便按国际规范办事，在贸易做法上加速同国际市场接轨。

(6)坚持学以致用原则

实习是一门实践性很强的应用学科。在学习过程中，要重视案例、实例分析和平时的操作练习，加强基本技能的训练，注重能力培养。在培养规模上突出应用性，加强实践性，注意灵活性。

实践的看法：

在操作过程中，根据本门课程的内容、特点，通过走出去、请进来等方式，精心组织方案。通过听、看、做使一些看起来繁杂的专业知识很快被我们理解和掌握。只有将理论联系实际，教学与实际相结合，才是培养我们能力的一种有效形式。

从事国际商务活动，尤其是国际间货物的买卖，其工作的最大特点就是要求商务人员在掌握基本知识的同时，必须具有很强的实际工作能力。现在我国已加入世界贸易组织，对从业人员的知识结构、实践能力和基本素质提出更高的要求。

出口合同范本

卖方：____

合同号码：____

买方：____

双方同意按下列条款由卖方出售，买方购进下列货物：

───────────────────┬───────────┬─────┬─────

(1)货物名称、规格、包装及唛头│ (2)数量│ (3)单价│(4)总值

───────────────────┼───────────┼─────┼────

包装：小捆70～120千克及/或大 │卖方有权在3%以内│上述价格内包括给买方佣

捆500～1000千克 │多装或少装 │金 %按fob值计算

───────────────────┴───────────┴───────────

(5)装运期限：

(6)装运口岸：

(7)目的口岸：

(8)保险：由卖方按发票金额110%投保

(9)付款条件：买方应通过买卖双方同意的银行，开立以卖方为受益的人，

不可撤销的、可转让和可分割的、允许分批装运和转船的信用证。该信用证凭装运

单据在中国的中国银行见单即付。

该信用证必须在__前开出。信用证有效期为装船后十五天在中国到期。

(10)单据：卖方应向议付银行提供已装船清洁提单、发票，装箱单/重量

单：如果本合同按cif条件，应再提供可转让的保险单或保险凭证。

(11)装运条件：

1)载运船只由卖方安排，允许分批装运并允许转船。

2)卖方于货物装船后，应将合同号码、品名、数量、船名、装船日期以电报

通知买方。

(12)品质和数量/重量的异议与索赔：货到目的口岸后，买方如发现货物

品质及/或数量/重量与合同规定不符，附属于保险公司及/或船公司的责任外，

买方可以凭双方同意的检验机构出具的检验证明向卖方提出异议。品质异议须于货

到目的口岸之日起30天内提出，数量/重量异议须于货到目的口岸之日起15天

内提出。卖方应于收到异议后30天内答复买方。

(13)人力不可抗拒：由于人力不可抗拒事故，使卖方不能在本合同规定期

限内交货或者不能交货，卖方不负责任。但卖方必须立即以电报通知买方。如买方

提出要求，卖方应以挂号函向买方提供由中国国际贸易促进委员会或有关机构出具

的事故的证明文件。

(14)仲裁：凡因执行本合同或与本合同有关事项所发生的一切争执，应由

双方通过友好方式协商解决。如果不能取得协议时，则在被告国家根据被告国家仲

裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的，对双方具有同等的约束力，

仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。

(15)备注：

卖方：____(盖章)

代表人：____(签字)

买方：____(盖章)

代表人：____(签字)

__年__月__日订立

2017年对外贸易合同范本推荐

合同号 contract no:_______

签字日期 signing date ______

卖方__________________________________________

the seller :

买方__________________________________________

the buyer :

双方同意按下列条款由卖方出售，买方购进下列货物：

the seller agrees to sell and the buyer agrees to buy the undermentioned goods on the terms conditions below:

(1)货物名称及规格 description of commodity， specifications

(2)数量 quantity

卖方有权在 _____% 以内多装或少装

shipment ______% more or less at sellers option

(3)单价 unit price

(4)总价 total amount

(5)包装：packing term ：

(6)唛头： shipping marks ：

(7)装运口岸： port of loading ： china ports

(8)目的口岸： port of destination。

(9)装运期限： time of shipment：

(10)保险：由卖方按发票金额110%投保。

insurance： to be effected by the seller for 110%of invoice value covering。

(11)商品检验：inspection：

(12)付款条件：买方应通过买卖双方同意的银行，开立以卖方为受益人的、不可撤销的、不可转让和不可分割的、允许分批装运和转船的即期信用证。该信用证凭装运单据在中国的中国银行见单议付。该信用证必须在______年___月___日前开到卖方。信用证有效期为装船后_____天在中国到期。

terms of payment :

the buyer shall open， with a bank to be accepted by both the buyer and the seller， an irrevocable，intransferable and indivisible letter of credit at sight， allowing partial shipments and transshipment， in favor of the seller and negotiable against first presentation of the shipping documents to the bank of china in china. the covering letter of credit must be opened and reached to the seller before and to remain valid in

n china until the _____day(inclusive) from the date of shipment。

(13)单据：卖方应向议付银行提供已装船清洁提单(或集装箱运输的己装船提单)、发票、品质证明、数量/重量鉴定书;如果本合同按cif条件，应再提供可转让的保险单或保险凭证。

documents： the seller shall present to the negotiating bank， clean on board bill of lading (or clean on board bill of lading for container transportation)， invoice， quality certificate， survey report on quantity/weight， and transferable insurance policy or insurance certificate when this contract is made on cif basis。

(14)装运条件： (cif/cfr)

1.载运船只由卖方安排，允许分批装运，允许转船、允许集装箱运输。

2.卖方于货物装船后，应将合同号码、品名、数量、船名、装船日期以电报通知买方。

terms of shipment ： (cif/cfr)

1. the carrying vessel shall be provided by the seller. partial shipments transshipment and containers transportation are allowed。

2. after loading is completed the seller shall notify the buyer by cable of the contract number . description of commodity ， quantity， name of the carrying vessel and date of shipment。

(15)品质与数量、重量的异议与索赔：货到目的口岸后，买方如发现货物品质及/或数量/重量与合同规定不符，除属于保险公司及/或船公司的责任外，买方可以凭双方同意的检验机构出具的检验证明向卖方提出异议，品质异议须于货到目的口岸之日起30天内提出，数量/重量异议须于货到目的口岸之日15天内提出。卖方应于收到异议后30天内答复买方。

quality/quantity/weight discrepancy and claim ：

in case the quality and/or quantity/weight are found by the buyer to be not in conformity with the contract after arrival of the goods at the port of destination， the buyer may lodge claim with the seller supported by survey report issued by an inspection organization agreed upon by both parties，with the exception ，however of those claims for which the insurance company and/or the shipping company are to be held responsible claim for quality discrepancy should be filed by the buyer within 30 days after arrival of the goods at the port of destination?while for quantity/weight discrepancy claim should be filed by the buyer within l5 days after arrival of the port of destination . the seller shall within 30 days after receipt of the claim， send reply to the buyer.

(16)不可抗力：由于人力不可抗拒的事故，使卖方不能在本合同规定期限内交货或者不能交贷，卖方不负责任。但卖方必须立即以电报通知买方，如买方提出要求，卖方应以挂号函向买方提供由中国国际贸易促进委员会或有关机构出具的发生事故的证明文件。

force majeure ： in case of force majelure， the seller shall not be held responsible for late delivery or non-delivery of the goods but shall notify the buyer by cable，the seller shall deliver to the buyer by registered mail ， if so requested by the buyer， a certificate issued by the china council for the promotion of international trade or any competent authorities。

(17)仲裁: 凡因执行本合同或与本合同有关事项发生的一切争执，应由双方以友好方式协商解决，如果不能取得协议时，则在被告国家根据被告国仲裁机构的仲裁程序规则进行仲裁，仲裁决定是终局的，对双方具有同等约束力。仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。

arbitration ： all disputes in connection with this contract or the execution thereof shall be settled through friendly negotiations between two parties if no settlement can be reached . the case in dispute shall then be submitted for arbitration in the country of defendant in accordance with the arbitration regulations of the arbitration organization of the defendant country， the decision made by the arbitration organization shall be taken as final and binding upon both parties. the arbitration expresses shall be borne by the losing party unless otherwise awarded by the arbitration organization。

(18)补充条款：

additional clauses :

(19)其他

双方公司落款及签字(盖章)

单证一直驻重 单单相符,单剧相符,单证相符.在实训中我就深刻的体会到了 这个相符的重要性.这就要求我们在填制单剧时一定要认真,仔细.单证是买卖的凭证,如果因为单证与单证之间出现了问题,将会给企业带来严重的经济损失.所以我们在学习单证,进行单证实训的过程都要一直秉着细心的原则.从现在开始,不能掉以轻心,这样才能为今后从事外贸工作建立基础.

在实训过程中,英语的重要性一直贯穿着整个单证填制,特别是对外贸专业英语的掌握.外语是我们对外交流的桥梁，因此在以后的学习中必须加强对外语的学习，同时加强口语的练习，这是我们搞外贸的基础，因此必须掌握好这门工具。对于外贸专业人员而言，不仅要掌握一定的专业知识，而且还必须会用英语与外商交流、谈判及写传真、书信。如果专业英语知识掌握不好，就很难胜任工作，甚至会影响业务的顺利进行。因此，在实习中要求我们加强英语的学习，掌握外贸专业术语基础。

(一)发盘、还盘、接受 ( 下定单 ) 。

发盘：盘信函拟写时，须准确、简单、具体、对于制定的对方的发盘的询盘要予以及时的、有针对性的答复，内容要明确、完整，提出主要交易条件。还盘：两次还盘由买卖双方分别填写，填写之前要正确分析对方的来电，参透对方交易条件中所隐含的意图，特别是要判断对方的报价能否接受，以便作出及时的、对自己有利的回复。因此 , 要注意两个方面的内容：一、写出对方来函的大意，并分析来函旨意。二、进行价格的简单换算与核算。接受。接受函要明确、肯定，切勿引起争议。因此，此项实训不仅锻炼了我们的业务操作技能，增加了国际贸易知识，还提高了英语写作水平，从思想上认识到了做业务的严谨。

这次实训充实了专业知识，丰富了社会经验，为即将走上工作岗位奠定了坚实的基础，增强了我们对自己适应工作需要的自信心。在这次实习中我学到了很多知识，锻炼了自己操作实务的能力希望在以后的学习中学校能提供更多的实践机会给我们，使我们能迅速的成长为一名合格的外贸人员。

一般货物出口合同

合同号：

日期：

订单号：

买方：

卖方：

买卖双方签订本合同并同意按下列条款进行交易：

（1）品名及规格

（2）数量

（3）单价

（4）金额合计允许溢短装＿＿％

（5）包装：

（6）装运口岸：

（7）目的口岸：

（8）装船标记：

（9）装运期限：收到可以转船及分批装运之信用证＿＿天内装出。

（10）付款条件：开给我方100％保兑的不可撤回即期付款之信用证，并须注明可在装运日期后15天内议付有效。

（11）保险：按发票110％保全险及战争险。由客户自理。

（12）买方须于＿＿年＿＿月＿＿日前开出本批交易信用证，否则，售方有权：不经通知取消本合同，或接受买方对本约未执行的全部或一部，或对因此遭受的损失提出索赔。

（13）单据：卖方应向议付银行提供已装船清洁提单、发票、中国商品检验局或工厂出具的品质证明、中国商品检验局出具的数量/重量签定书；如果本合同按cif条件，应再提供可转让的保险单或保险凭证。

（14）凡以cif条件成交的业务，保额为发票价值的110％，投保险别以本售货合同中所开列的为限，买方如要求增加保额或保险范围，应于装船前经售方同意，因此而增加的保险费由买方负责。

（15）质量、数量索赔：如交货质量不符，买方须于货物到达目的港30日内提出索赔；数量索赔须于货物到达目的港15日内提出。对由于保险公司、船公司和其它转运单位或邮政部门造成的损失卖方不承担责任。

（16）本合同内所述全部或部份商品，如因 人力不可抗拒的原因，以致不能履约或延迟交货，售方概不负责。

（17）仲裁：凡因执行本合同或与本合同有关事项所发生的一切争执，应由双方通过友好方式协商解决。如果不能取得协议时，则在中国国际经济贸易仲裁委员会根据该仲裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的，对双方具有同等约束力。仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。仲裁也可在双方同意的第三国进行。

（18）买方在开给售方的信用证上请填注本确认书号码。

（19）其它条款：卖方：买方：

2.salescontract

wholedoc.

no:

date:

foraccountof:

indentno:

thiscontractismadebyandbetweenthesellersandthebuyers;wherebythesellersagreetosellandthebuyersagreetobuytheundermentionedgoodsaccordingtothetermsandconditionsstipulatedbelowandoverleaf:

(1)namesofcommodity(ies)andspecification(s)

(2)quantity

(3)unitprice

(4)amounttotal:__________%moreorlessallowed

(5)packing:

(6)portofloading:

(7)portofdestination:

(8)shippingmarks:

& nbsp;

(9)timeofshipment:within____________________daysafterreceiptofl/c,allowingtranshipmentandpartialshipment.

(10)termsofpayment:by100%confirmed,irrevocableandsightletterofcredittoremainvalidfornegotiationinchinauntilthe15thdayaftershipment.

(11)insurance:coversallrisksandwarrisksonlyaspertheclausesofthepeople’sinsurancecompanyofchinafor110%oftheinvoicevalue.tobeeffectedbythebuyer.

(12)thebuyershallestablishthecoveringletterofcreditbefore_________;failingwhich,thesellerreservestherighttorescindthissalescontractwithoutfurthernotice,ortoacceptwholeoranypartofthissalescontract,non-fulfilledbythebuyer,oftolodgeclaimfordirectlossessustained,ifany

(13)documents:thesellersshallpresenttothenegotiatingbank,cleanonboardbilloflading,invoice,qualitycertificateissuedbythechinacommodityinspectionbureauorthemanufacturers,surveyreportonquantity/weightissuedbythechinacommodityinspectionbureau,andtransferableinsurance policyorinsurancecertificatewhenthiscontractismadeoncifbasis.

(14)forthiscontractsignedoncifbasis,thepremiumshouldbe110%ofinvoicevalue.allrisksinsuredshouldbeincludedwithinthiscontract.ifthebuyeraskstoincreasetheinsurancepremiumorscopeofrisks,heshouldgetthepermissionofthesellerbeforetimeofloading,andallthechargesthusincurredshouldbebornebythebuyer.

(15)quality/quantitydiscrepancy;incaseofqualitydiscrepancy,claimshouldbefiledbythebuyerwithin30daysafterthearrivalofthegoodsatportofdestination;whileforquantitydiscrepancy,claimshouldbefiledbythebuyerwithin15daysafterthearrivalofthegoodsatportofdestination.itisunderstoodthatthesellershallnotbeliableforanydiscrepancyofthegoodsshippedduetocausesforwhichtheinsurancecompany,shippingcompany,othertransportationorganizationsand/orpostofficeareliable.

(16)thesellershallnotbeheldliableforfailureordelayindeliveryoftheentirelotoraportionofthegoodsunderthissalescontractinconsequenceofanyforcemajeu reincidents.

(17)arbitration:alldisputesinconnectionwiththiscontractortheexecutionthereofshallbesettledfriendlythroughnegotiations.incasenosettlementcanbereached,thecasemaythenbesubmittedforarbitrationtochinainternationaleconomicandtradearbitrationcommissioninaccordancewiththeprovisionalrulesofprocedurespromulgatedbythesaidarbitrationcommission.thearbitrationshalltakeplaceinbeijingandthedecisionofthearbitrationcommissionshallbefinalandbindinguponbothparties;neitherpartyshallseekrecoursetoalawcourtnorotherauthoritiestoappealforrevisionofthedecision.arbitrationfeeshallbebornebythelosingparty.orarbitrationmaybesettledinthethirdcountrymutuallyagreeduponbybothparties.

(18)thebuyerisrequestedalwaystoquotethenumberofthesalescontractintheletterofcredittobeopenedinfavouroftheseller.

(19)otherconditions:

seller: buyer:

时光飞逝，光阴荏苒，从20__年4月到6月，作为外贸业务员的我，不知不觉已经来__汽车服务有限公司实习将近两个月了。在这两个月里，我和公司的同事以及领导都相处得很是融洽，大家对我也关怀备至，时常给我鼓励和帮助。外贸业务员，说白了，就是一个会讲英语的销售员，看似简单，要做好却是很难，要知道做好任何一份工作都需要付出满分的努力。

虽然实习接近尾声，但是我依旧感到万分荣幸，能够在__汽车服务有限公司得到这次的实习机会。让我在工作中不断学习，不断进步，提升自我。__汽车服务有限公司成立于1999年9月，注册资本1020万元，公司地处_____，是一家集汽车及汽配销售、维修（一类）、装饰、保险、旧车交易、驾驶培训、汽修教学服务于一体的综合性服务企业。公司于20__年开始放眼于国外市场，努力通过国际贸易提高公司的营业效益。

作为公司销售外贸部的一名实习新手，首先需要做的就是尽快熟悉公司环境与外贸业务流程，而我的主要工作是负责网络发布，比如及时更新产品信息，并不定期地将一些新的产品发布到阿里巴巴或made in china平台上充实我们的产品信息，同时会时常搜索注册一些免费B2B网站，电邮电话联系国外潜在客户，处理客户询盘报价等工作。把所学到的英语知识与现实操作完美结合起来。 最开始上岗的时候，我的内心是有些忐忑不安的，一方面来自其他外贸业务员对工作的描述：要有超人的耐力，惊人的抗压力，还要考验反应力。另一方面则来自对外贸行业的陌生感，虽然在学校的国际贸易课上学过一些，但那也只是一些理论知识，仅作为实战的参考借鉴。我知道挑战已经开始。

幸运的是我的实习生活有一个很好的开端。办公室主任安排老业务员吴姐以师傅带徒弟的方式，指导我的日常实习工作。在吴姐的帮助下，我逐渐熟悉了公司的各项规章制度、外贸整体流程以及作为外贸新手的主要工作职责。我先从熟悉产品的分类、型号开始，然后一步一步了解整个下单、发货的流程。在对外贸流程有个整体的了解之后，开始熟悉我的具体工作内容，如何发布信息，发布哪些信息，如何搜索顾客，跟踪顾客，如何处理询盘等等。

从一开始赤裸裸的来，到现在即将沉甸甸的回去，惟有短短的两个月时间，就让我如此受益非浅，如此感慨万分：

1、调整心态，准备持久战

新手做外贸， 切忌冒进的心态。听很多外贸前辈说大多数外贸新手都是第一个月干劲十足，第二个月便灰心丧气，到最后抛弃放弃的也不在少数。如果想要做好外贸，一开始就应该有一个比较平和的心态，有目的，有节奏的去做这个事情。外贸是一个长期积累的过程，要相信剩者为王，此剩非彼胜！不抛弃不放弃才能如愿走到最后。相较之前的冒进，现在的平和淡定让我看起来沉稳了许多。

2、培养良好的时间观念

要培养良好的时间观念，公司领导多次教导我，时间就是生命线，没有一个客户会专门等你。要及时的处理一切客户的有关询盘，给客人留下好的印象。平时的工作中也要严格遵守上下班时间，公司不比学校那么自由。

3、端正对犯错的观念

作为学生，犯了错老师会原谅你，但是在工作中，犯了错的后果很可能是被炒鱿鱼。当然每一个人都有犯错的时候，工作中第一次做错了不要紧，领导会纠正并且原谅你，但下次你还在同一个问题上犯错误，后果可想而知。

4、积累英语专有词，提高自身竞争力

要知道在书上所学到的一些关键词到真正的岗位上是远远不够的。行业内的专有词是新手入行之后必须慢慢积累的一个重要的知识体系，产品的专业词汇更是不能缺少，碰到客人为了专业问题，单词半天看不懂什么意思，只怕是对你产品再敢兴趣的客户，也难留得住。

5、学无止境，掌握最新最全面的信息

时刻准备充电，在今天这个瞬息万变的信息时代，如果仅靠已知的信息，结果指挥使坐吃山空，立地吃陷。公司前辈教给我们一定要时常去一些外贸论坛里逛逛，里面不乏外贸精英们的有用经验教训或者外贸行业的最新动态，今时不同往日，信息已经不是少数人才能知道的秘密。如何在众多竞争者中脱颖而出，靠的就是比别人更善于了解分析和利用信息。

当然，这份简短的总结还有很多缺憾，我会在以后的工作中不时地进行反思与总结。一个人有缺点不可怕，可怕的是没有直面它、解决它。我也相信在领导和同事的帮助之下，我可以更加的完善自己，通过自己的努力和拼搏，和公司一起发展。在此，我要特别感谢公司领导和各位同事在工作和生活中给予我的支持和关心，这是对我工作最大的肯定和鼓舞，我真诚的表示感谢！最后希望在未来的路上，不管是公司还是个人都能以全新的面貌来迎接新的挑战，走得更好，走得更远！

甲方：________________

乙方：________________

上述甲乙双方方因为拓展市场，充分调动乙方的积极性、主动性，实现企业增效、个人增收的目标，现双方在平等自愿、协商一致的基础上，达成如下协议：

一、本协议是平等主体的甲、乙双方之间的业务合作关系，甲、乙双方不存在劳动关系及其他任何人事隶属关系。

二、双方商定，合作为期限为年，自_____年____月____日起至_____年____月____日止，期满双方可协商续订。

三、合作合作方式：

乙方以甲方名义对外开展销售业务，甲方提供所需的法律文件。必要时，甲方以其掌握的商业信息与乙方共享。

四、利益分配：

乙方取得的销售收入，扣除税收、等企业必要开支后的净利润，按甲方65％、乙方35％的比例分配。

上述利益分配的具体时间、方式，双方可另行协商，但每一协议年度应对双方各自收益结算一次，乙方对其拓展的销售业务，应进行后续跟踪，包括安排生产、监督生产、监督发货以及货款全额回收等。

五、乙方在开展业务的过程中支出的差旅费、招待费、交通费、通讯费等由乙方承担。

六、乙方在承接业务前，应对客户的资信情况进行认真、详细的调查，在确定对方有履行能力和诚意的情况下，方可与其发生业务往来。乙方承接的所有业务，拟签订的合同或协议（特别是有关质量要求、价格、交期、付款方式、期限进度等条款）均须经甲方审核同意后，方可正式与客户签约。合同应由甲方与客户签订。

七、售后服务由甲方指定的部门或人员负责，乙方应按甲方的要求积极配合，货物（定作物）发出后，客户就质量、数量、交期等方面提出异议的，乙方按甲方的指示进行处理，乙方不能自行与客户签订赔偿协议或任何类似的合同、承诺、声明等，否则，甲方由此遭受的.损失均由乙方承担。

乙方应及时将客户的意见向甲方反映，由甲方进行调查核实，如确需退货、换货或赔偿损失的，由甲方书面委托的人员与客户谈妥解决方案后签订处理协议。处理上述争议过程中所需的差旅费、招待费、赔偿金等，作为经营成本。

八、凡乙方拓展的业务，乙方应负责按甲方与客户签订的合同所约定的收款期限及时把业务款收回并交至甲方。逾期未收回，该款暂列为亏损，在结算双方受益分配时从纯利润中扣除，待收回后另行按约定进行分配。

在收款过程中，应请客户一律以银行汇票、支票、电汇等方式把款项直接打入甲方银行帐户，不得收取现金。如遇特殊情况确需收取现金的，必须在收款后三日内交（汇）给甲方。聘期届满，若双方未达成续聘协议的，乙方仍应按前述约定将其经手的业务款全部收回甲方。严禁以任何形式、理由挪用或侵占业务款，否则，一经发现，甲方除可依法追回该款项外，还有权解除与乙方签订的协议，情节严重的，还可请求公安机关追究其刑事责任。

九、甲方或乙方如提前解除本协议，应提前30天向对方递交书面通知。甲方或乙方提前解除本协议或本协议期限届满而终止的，乙方必须将自己所经办的业务款全部收回，并将自己经办的其他事宜向甲方办妥移交手续。乙方向甲方付款后，该业务应收款债权转让给乙方，并通知有关债务人。

十、乙方在与甲方合作期间以及解除合作关系后两年内，必须严格保守甲方的商业秘密（包括但不限于客户名单、销售渠道、销售策略等经营秘密和技术秘密）；不得泄露、非法使用、转让或许可其他单位、个人使用。具体事宜，由双方签订的保密协议确定。

十一、双方在履行本协议的过程中如发生争议，友好协商解决未成的，任何一方均可向张家港市人民法院起诉。

十二、本协议一式________份，甲方和乙方各执________份，经双方签字或盖章后生效。

甲方：________________

乙方：________________

_____年____月____日

外贸出口合同样本

7.不论发生上述何种情况，不免除乙方按期支付租金的义务。

第四条 合同期限和还租期限

1.本合同期限，指从本合同生效之日至甲方收到乙方所有租金和应付的一切款项后出具租赁物所有权转移证明书之日。

2.还租期限，指从还租期限起算日(以《到货通知单》上注明的租赁物运抵到货港日期为准)至最后一期租金应付日。

第五条 租金

1.甲方为乙方融资购买租赁物，乙方承租租赁物件须付租金给甲方。

2.租金是购买租赁物的成本与租赁费之和。

成本是甲方为乙方购买租赁物和乙方交货所支付的货款、运费、保险费(含财产保险)及双方一致同意计入成本的费用与租前息(甲方支付上述费用从其支付或实际负担日起还租期限起算日止所产生的利息总金额)之和。

计算租金的租赁费率由国际金融市场浮动利率和筹资手续费、风险费率及甲方应得的合理利差(后三项为不变量)两部分组成。签订本合同之日确定的租赁费率为本合同的暂定租赁费率。开立信用证之日确定的租赁费率为合同的固定租赁费率，在还租期内固定不变，外汇计息方法按中国银行的规定办理。

3.《租金概算表》为甲乙双方签订本合同时的财务预算表，其租金根据概算成本和暂定租赁费率计算，具有暂时性。本合同的暂定租赁费率为(货币：____ )____ /年。

4.《实际应付租金通知书》，为乙方偿还甲方租金的依据，根据实际成本和还租期限内的固定租赁费率计算。计算实际成本时，如甲方支付货款的货币与本合同货币不同时，按甲方实际兑换的汇率折成本合同的货币计算。租前息按固定租赁费率计算。

5.实际成本核算完毕后，甲方向乙方发出《实际应付租金通知书》。除计算错误外，乙方同意不论租赁物件使用与否，都以该通知书中载明的日期、金额、币种等向甲方支付租金。

6.如乙方提前偿还租金，需提前30天同甲方协商，甲方同意后，方可提前偿还租金，但须加收二个月利息。

如乙方未按期支付租金，应缴纳迟延利息，延付一个月内按原固定租赁费率的130%计收；一个月后，每超过一天加收欠租金额的万分之五罚息。

第六条 服务费和保证金

1.乙方在购买合同签订日后15天内，向甲方交付________元，作为付给甲方的服务费。

2.乙方按《租金概算表》(10)的规定，在购买合同签订日后15天内交付甲方保证金。保证金不计利息，在第一期租金到期时，自动抵作该期租金的全部或部分。

3.如因乙方未及时支付保证金和服务费致使购买合同不能执行所造成的损失由乙方负责。

第七条 租赁物的所有权和使用权

1.在本合同期限内，租赁物的所有权属于甲方。乙方除非征得甲方的书面同意，不得有转让、转租、抵押租赁物或将其投资给第三者或其他任何侵犯租赁物所有权的行为，也不得将租赁物迁离《租金概算表》中所记载的设置场所或允许他人使用。

2.在本合同期限内，租赁物的使用权属于乙方。如任何第三者由于甲方的原因对租赁物主张任何权利，概由甲方负责。乙方的使用权，不得因此受到影响。

3.在本合同期限内，乙方负责租赁物维修、保养并承担其全部费用。甲方有权在其认为适当的时候，检查租赁物的使用和保养情况，乙方对甲方的检查应提供方便。如果需要，租赁物维修保养合同由乙方与卖主或原制造厂家签订，或由甲方代乙方与卖主或原制造厂家签订，或由甲方代乙方与卖主或原制造厂家签订。如需更换租赁物的零件，在未得到甲方书面同意时，只能用其原制造厂提供的零件更换。

共16页，当前第7页12345678910111213141516

皮革进料加工制品出口代理协议书

甲方：_________

乙方：_________

甲乙双方经友好协商，就甲方委托乙方代理皮革进料加工，皮革制品出口业务达成如下协议：

一、甲方委托乙方代理皮革进料加工，皮革制品出口至_________业务，乙方接受甲方委托。

二、合同标的：_________

产品名称：_________

数量：_________

合同金额：_________

拟出运日期：_________

出运港：_________

到货港：_________

外方付款结算方式：_________

三、双方责任及义务：

（一）甲方职责：

1.负责与外商签订所有出口合同，并对合同的全部内容负责；

2.负责安排生产、出运、交货；

3.负责向乙方提供工厂开具的增值税发票、纳税缴款书及运费等正式发票；

4.承担业务的全部费用及风险，保证按合同条款（合同标的）的全部内容执行，并向乙方支付出口代理手续费（乙方收汇）。

（二）乙方职责：

1.负责按甲方提供的合同内容对外签订出口合同；

2.提供出口货物商检、报关、出运和结汇等工作所需的单据；

3.负责出口结汇；

4.结汇后一周内，将货款转付甲方帐户。

四、违约责任：

如因任何一方未履行本协议规定的责任而给对方造成的经济损失，由违约方承担。

五、甲方出具的担保函是本协议不可分割的一部分。

六、本协议一式两份，双方各执一份。自签字之日起生效，具有同等法律效力。

甲方（盖章）：_________ 乙方（盖章）：_________

代表（签字）：_________ 代表（签字）：_________

_________年____月____日 _________年____月____日

对外贸易合同范本

contract

对外贸易合同范本

no.:

date:

the buyers:

address :

tel: fax:

买方：

地址：

the sellers:

address:

tel: fax:

this contract is made by and between the buyers and the sellers, whereby the buyers agree to buy and the sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below:

买方与卖方就以下条款达成协议：

1. commodity:

item no.

description

名称及规格

unit

单位

qty

数量

unit price

单价

amount

总价

cip xi’an airport

total value cip xi’an airport usd

say u.s. dollars only.

2. country and manufacturers:

原产国及造商：

3. packing:制

to be packed in standard airway packing. the sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the packing.

包装：标准空运包装。如果由于不适当的包装而导致的货物损坏和由此产生的费用，卖方应对此负完全的责任。

4. shipping mark:

the sellers shall mark on each package with fadeless paint the package number, gross weight, net weight, measurement and the wordings: "keep away from moisture" "handle with care" "this side up" etc. and the shipping mark:

唛头：卖方应用不褪色的颜料在每个箱子外部

刷上箱号、毛重、净重、尺寸，并注明“防潮”、

“小心轻放”、“此面向上”等，唛头为:

5. time of shipment(装运期)：within days after receipt of l/c

6. port of shipment(装运港)：

7. port of destination(目的港)： , china

8. insurance(保险)：to be covered by sellers for 110% invoice value against all risks.

9. payment(付款方式)the buyer open an irrevocable 100% l/c at sight in favor of seller

信用证付款：买方给卖方开出100%不可撤销即期信用证。

银行资料：

10. documents:

1. full set of air waybill in original showing “freight prepaid” and consigned to applicant. 空运提单一套

2. invoice in three copies. 发票一式叁份

3. packing list in three copies issued by the sellers. 装箱单一式叁份

4. certificate of quality issued by the sellers. 制造厂家出具的质量证明书

5. insurance policy. 保险单一份

6. certificate of origin issued by the sellers. 原产地证书

7. manufacturer’s certified copy of fax dispatched to the applicant within 24 hours after shipment advising

flight no., b/l no., shipment date, quantity, gross weight, net weight, and value of shipment.

制造厂家通知开证申请人有关货物装运的详细资料传真复印件壹份

8. the seller’s certificate and waybill certifying that extra documents have been dispatched according

to the contract terms by express airmail.

卖方有关另外用特快邮寄壹套单据给开证申请人的证明书及邮寄底单.

9. certificate of no wooden packing or certificate of fumigation.非木包装声明或熏蒸证.

in addition, the sellers shall, within three days after shipment, send by express airmail one extra sets of

the aforesaid documents directly to the buyers.

另外，卖方应于货物发运后三天内，用特快专递寄送一套上述的单据给买方。

11. shipment:

the sellers shall ship the goods within the shipment time from the port of shipment to the destination. transshipment is allowed. partial shipment is not allowed.

运输：卖方应于交货期内将合同货物从装货港运到目的港，不许分批，允许转运。

12. shipping advice:

the sellers shall, immediately upon the completion of the loading of the goods, advise by fax the buyers of the contract no., commodity, quantity, invoiced value, gross weight, name of vessel and date of delivery etc. in case due to the sellers not having faxed in time, all losses caused shall be borne by the sellers.

装运通知：卖方应于装货后，立即用传真将有关合同号、货物、数量、发票价值、毛重、运输工具名称、交货日期、货物预计抵达日等资料通知买方。如果由于卖方未能通知买方而造成的所有损失均由卖方承担。

13. guarantee of quality:

the sellers guarantee that the commodity hereof is made of the best materials with first class workmanship, brand new and unused, and complies in all respects with the quality and specification stipulated in this contract. the guarantee period shall be 12 months counting from the date of signing the acceptance report of this machine at the end-users site.

质量保证：卖方保证合同货物采用最好的材料、精湛的做工、全新、未使用过、质量和技术规格均符合合同的要求。质保期为最终用户签定验收报告后12个月内。

14. claims:

within 90 days after the arrival of the goods at destination, should the quality, specification, or quantity be found in unconformity with the stipulations of the contract except those claims for which the insurance company or not the owners of the vessel are liable, the buyers shall, on the strength of the inspection certificate issued by the state administration for entry-exit inspection and quarantine of p.r.c. or the site inspection report issued by the seller’s engineer, have the right to claim for replacement with new goods, or for compensation, and all expenses (such as inspection charges, freight for returning the goods and for sending the replacement, insurance premium, storage and loading and unloading charges etc.) shall be borne by the sellers. as regards quality, the sellers shall guarantee that if within 12 months from the date of signing the acceptance report of this machine, damages occur in the course of operation by reason of inferior quality, bad workmanship or the use of inferior materials, the buyers shall immediately notify the sellers in writing and put forward a claim supported by inspection certificate issued by the state administration for entry-exit inspection and quarantine of p.r.c. .the certificate so issued shall be accepted as the base of a claim. the sellers, in accordance with the buyers claim shall be responsible for the immediate elimination of the defect(s), complete or partial replacement of the commodity or shall devaluate the commodity according to the state of defect(s), . if the sellers fail to answer the buyers within one month after receipt of the aforesaid claim, the claim shall be reckoned as having been accepted by the sellers.

索赔：货物抵达目的地后90天内，如果质量、技术规格或数量发现与合同的规定不符(除过保险公司和运输公司的责任所负)，买方应该依据中华人民共和国出入境检验检疫局的检验报告或者是卖方的调试人员在安装调试时出具的报告，有权要求替换或补偿，所有的费用(包括商检费、替补件来回的运费、保险费、仓储费、货物装货卸货费等)均由卖方承担。卖方的质量保证为签定关于此批货物的验收报告后12个月内;由于货物内在的质量、差的做工、选材不当而造成操作中的货物损坏，买方应立即书面通知卖方，并同时随附中国商检局出具的检验报告作为索赔依据。卖方在接到买方的索赔后，有责任立即解决相应的质量问题、全部或部分地替换货物或根据货物损坏的程度进行折价; 如果卖方在收到买方的上述索赔后一个月内未能作出答复，则视为索赔已为卖方所接受。

15. force majeure:

the sellers shall not be held responsible for the delay in shipment or non-delivery of the goods due to force majeure, which might occur during the process of manufacturing or in the course of loading or transit. the sellers shall advise the buyers immediately of the occurrence mentioned above and within fourteen days thereafter, the sellers shall send by airmail to the buyers for their acceptance a certificate of the accident issued by the competent government authorities where the accident occurs as evidence thereof. under such circumstances the sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. in case the accident lasts for more than 10 weeks, the buyers shall have the right to cancel the contract.

不可抗力：对于制造或装船运输过程中可能产生的不可抗力而造成的迟交货或不能交货，卖方可以不承担责任。卖方应立即在不可抗力产生的十四日内将有关情况通知买方，并且卖方应用航空邮件将有关政府当局部门出具的证明不可抗力产生的文件寄送给买方。在此情况下，卖方仍应尽最大努力采取各种措施促使货物的发运。如果事故持续十周，买方有权取消该合同。

16. late delivery and penalty:

should the sellers fail to make delivery on time as stipulated in the contract, with exception of force majeure causes specified in clause 15 of this contract. the buyers shall agree to postpone the delivery on condition that the sellers agree to pay a penalty which shall be deducted by the paying bank from the payment. the penalty, however, shall not exceed 5% of the total value of the goods involved in the late delivery. the rate of penalty is charged at 0.5% for every seven days. odd days less than seven days should be counted as seven days. in case the sellers fail to make delivery ten weeks later than the time of shipment stipulated in the contract, the buyers shall have the right to cancel the contract and the sellers, in spite the cancellation, shall still pay the aforesaid penalty to the buyers without delay.

迟交货和罚金：如果卖方未能按合同规定及时交货(除了本合同15条款所言的不可抗力)，买方同意在卖方付罚金的前提下迟交货。罚金的金额不超过迟交货的合同货物部分的价值的5%，罚金按每7日0.5%计算，少于7日的增加天数按7日计。如果卖方未能于合同规定的交货期之后的十周内发运，买方有权取消该合同，除此之外，卖方仍要将有关罚金不加拖延地付给买方。

17. arbitration:

any dispute arising from or in connection with this contract shall be submitted to china international economic and trade arbitration commission for arbitration which shall be conducted in accordance with the commissions arbitration rules in effect at the time of applying for arbitration. the arbitral award is final and binding upon both partied. arbitration fee shall be borne by the losing party.

仲裁：与此合同有关的争议应通过友好协商解决。如果协商无法解决，提交中国国际经济贸易仲裁委员会进行仲裁。按照申请仲裁时该会现行有效的仲裁规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。仲裁费用由败诉方承担。

18.bank charges: all bank charges outside china will be on the account of the sellers.

银行费用：所有中国之外的银行费用均由卖方承担。

19.other: this contract signed in three copies, the seller holds one copy and the buyer hold two copies.

其它：本合同一式叁份，卖方执壹份, 买方执贰份。

the buyers the sellers

进口国际货物贸易合同（格式合同）

卖方________

地址：________

电报挂号：________

买方：________

地址：________

电报挂号：________

日期：________

签约地点：________

兹经卖买双方同意成交下列商品订立条款如下：

1.商品：________

2.规格：________

3.数量：________

4.单价：________

5.总价：______U.S.D.(大写：________)

6.包装：________

7.装运期：________收到信用证后____天

8.装运口岸和目的地：从____经____至____。

9.保险：________

10.付款条件：________

(1)买方须于______年____月____日前将保兑的、不可撤销的、可转让、可分割的即期信用证开到卖方。信用证议付有效期延至上列装运期后，____天在____到期。

(2)买方须于签约后即付定金______%。

11.装船标记及交货条件：货运标记由卖方指定。

12.注意：开立信用证时请注明合同编号号码。

13.备注：____________________

卖方：________

日期：________

买方：________

日期：________

空运出口运输合同模板

甲方：_________________

地址：_________________

电话：_________________

乙方：_________________

地址：_________________

电话：_________________

经过平等、友好协商，甲、乙双方就空运货物出口运输事宜，于_________年_________月_________日签订如下协议：

一、委托事项

甲方接受乙方委托，承接乙方委托的空运出口运输业务。乙方指定甲方作为其代理人，代为安排提货、办理出口报关和出口商品检验检疫等事务。

二、乙方应在每票货物出运之前五个工作日以书面形式(包括信函、传真、电报、电传)向甲方提交《出口运输委托书》(简称委托书或托单)。

委托书应包括但不限于以下内容：

1.托运人(shipper)名称、姓名、地址、联系方式;

2.收货人(consignee)名称、姓名、地址、联系方式;

3.通知方名称、姓名、地址、联系方式;

4.航班号、日期、始发港、目的港;

5.货物品名、件数、重量、体积、声明价值;

6.运费及其它费用的标准和支付方式;

7.托运人的签名、盖章、日期。

乙方提交的委托书没有签名盖章或乏上述部分或全部内容的，乙方应按照甲方要求进行补正，否则甲方有权拒绝接受委托。

三、乙方委托甲方代为办理货物出口报关和出口商品检验检疫等事务的，应及时向甲方提供办理上述事务所需的文件和单证。乙方应对其提供的文件和单证的真实性、合法性和完整性负责。

四、乙方在向甲方发出委托后要求撤销或变更委托事项、委托内容的，应采用书面形式并得到甲方的认可，乙方应补偿甲方由此付出的额外费用。

五、接收货物

如果甲方在收货时发现乙方的货物表面状况(包括外包装)不良，甲方有权拒绝接收货物。如果乙方不能在甲方要求的时间内对货物及其包装进行改良，甲方有权停止为乙方出运货物。由于甲方原因未能在乙方指定时间内将货物按排出港，乙方有权向甲方提出损失索赔。

六、对货物的要求

乙方不应在其托运的货物中夹带禁止运输、限制运输物品和危险物品。有关对禁止运输、限制运输物品和危险物品的规定以国际公约、相关国家法律法规规章、行业协会等的明文规定为准。如乙方谎报货物品名，夹带上述物品，乙方应对由此而造成的甲方的全部损失承担赔偿责任。

七、乙方应向甲方支付与货物运输有关的所有运杂费用。乙方应在货物起飞后30天内将相应款项支付给甲方。

八、本协议有关的任何事务，适用中华人民共和国法律、法规及相关国际公约的规定。

九、协议的修改和补充

对本协议的修改和补充应采用书面形式，并得到双方的书面确认。修改和补充从双方书面确认之日起生效。

十、本协议自双方盖章之日起生效。本协议的有效期至_________年_________月_________日止。

十一、本协议以传真形式签订确认，同具法律效力。

十二、签约地：_________________________。

甲方(盖章)：_________

代表(签字)：_________

_________年____月____日

乙方(盖章)：_________

代表(签字)：_________

_________年____月____日