外贸订单合同范本精选20篇

涉外贸易合同书范本

于_________年_________月_________日，_________先生_________有限公司(以下简称售方)，_________先生_________公司(以下简称购方)，鉴于售方同意出售，购方同意购买_________(以下简称合同货物)，其合同货物的质量、性能、数量经双方确认，并签署本合同，其条款如下：

1.合同货物：_________

2.数量：_________

3.原产地：_________

4.价格：_________f.o.b_________

5.装船：第一次装船应于接到信用证后30天至45天内予以办理。从第一次装船，递增至终了，应在12个月内完成。

6.优惠期限：为了履行合同，若最后一次装船时发生延迟，售方提出凭证，购方可向售方提供30天的优惠期限。

7.保险：由购方办理。

8.包装：用新牛皮纸袋装，每袋为_________公斤;或用木箱装，每箱为_________公斤。予以免费包装。

9. 付款条件：签订合同后5天(公历日)内购方通过开证行开出以售方为受益人，经确认的，全金额100%的，不可撤销的，可分割的，可转让的，允许分期装船的信用证，见票即付并出示下列证件：

(1)全套售方商业发票;

(2)全套清洁、不记名、背书提单;

(3)质量、重量检验证明。

10.装船通知：购方至少在装货船到达装货港的7天前，将装货船到达的时间用电传通知售方。

11.保证金：

(1)通知银行收到购方开具的不可撤销信用证时，售方必须开具信用证_________%金额的保证金。

(2)合同货物装船和交货后，保证金将原数退回给售方。若出于任何原因，本合同规定的第12条除外，发生无法交货(全部或部分)按数量比例将保证金作为违约予以没收支付给购方。

(3)若由于购方违约或购方不按照本合同第9条规定的时间内，(第12条规定除外)开具以售方为受益人的信用证，必须按保证金相同的金额付给售方。

(4)开具的信用证必须满足合同所规定的条款内容。信用证所列条件应准确、公道，售方并能予以承兑。通知银行收到信用证后，通知银行应给开证银行提供保证金。

12.不可抗力：售方或购方均不承担由于不可抗力的任何原因所造成的无法交货或违约，不可抗力的任何原因包括战争、封锁、冲突、叛乱、罢工、雇主停工、内乱、骚动、政府对进出口的限制、暴动、严重火灾或水灾或被人们所不能控制的自然因素。

交货或装船时间可能出现延迟，购方或售方应提出证明予以说明实情。

13.仲裁：因执行本合同所发生的一切争执和分歧，双方应通过友好协商方式解决。若经协商不能达成协议时，则提交仲裁解决。仲裁地点在_________由_________仲裁委员会仲裁，按其法规裁决。仲裁委员会的裁决是终局裁决，对双方均有约束力。仲裁费用应由败诉方承担。除进行仲裁的那部分外，在仲裁进行的同时，双方将继续执行合同的其余部分。

14.货币贬值：若美元货币发生法定贬值，售方保留按贬值比率对合同价格予以调整的核定权力。

15.有效期限：本合同签字后，在7天内购方不能开出以售方为受益人的信用证，本合同将自动失效。但购方仍然对第11条中第(2)、(3)项规定的内容负责，支付予以补偿。

本合同一式两份，经双方认真审阅并遵守其规定的全部条款，在见证人出席下经双方签字。

售方(盖章)：_________ 购方(盖章)：_________

代表(签字)：_________ 代表(签字)：_________

签订地点：_________ 签订地点：_________

_________年____月____日 _________年____月____日

进口委托代理协议书

进口委托代理协议书

甲方：_________

乙方：_________

甲乙双方经友好协商，就甲方委托乙方代理进口_________业务达成以下协议：

一、甲方委托乙方代理进口_________，乙方接受甲方的委托。

二、双方责任义务

（一）甲方责任

1.负责与外方商定所有合同条款，并对合同的全部内容及交货内容负责。

2.及时向乙方支付定金及货款。定金为合同总金额的25％，于双方协议签订三日内支付，其余75％货款由甲方提供工厂担保，并于信用证开出后十天内付清，担保函是本协议不可分割的一部分。

3.按时支付乙方代理手续费，比例为合同金额的3％，于协议签订三日内支付。

4.预付港口一切费用（报关、接货、滞报、滞箱费等），预计为_________元（根据实际费用结算金额，多退少补）。支付银行利息（_________个月，金额为_________）及银行费用。

5.保证该票货物进口加工后以_________公司名义再出口，详见双方出口代理协议。

（二）乙方责任

1.根据甲方提供的外销合同条款对外签约，详见_________合同（编号_________）。

2.负责办理进料加工手册及其它相关手续。

3.负责代甲方办理报关、接货等手续。

4.及时将有关单据转交甲方。

5.如发生索赔等经济纠纷，乙方可在甲方委托下，代办有关涉外手续。

三、甲乙双方应各自履行职责义务，如在各自职责范围内出现问题或发生损失由各自承担责任。

四、本协议未尽事宜，双方另行协商解决。

五、本协议与甲方出具的担保函同时生效。

六、本协议一式两份，双方各执一份，自双方签字盖章之日起生效。

甲方（盖章）：________ 乙方（盖章）：________

代表（签字）：________ 代表（签字）：________

________年____月____日 ________年____月____日

出口代理合同范本

出口代理方：________________________（以下简称甲方）

委托方：____________________________（以下简称乙方）

为了发挥各自优势，共同做好出口创汇工作，本着“诚实、信用”的原则，甲、乙双方经过友好协商达成协议如下：

一、合作形式

1.乙方以其拥有的出口客户和渠道与甲方进行出口业务合作，乙方承诺其拥有的出口客户和渠道没有侵犯第三者的权益，进行的出口业务内容合法，无欺诈等行为，否则乙方承担最终的全部法律责任；

2.合作期间，乙方作为甲方的业务办事处或业务部对外从事出口业务并承担规定的义务；

3.合作期间，乙方以甲方名义从事出口业务必须遵循本协议的有关规定；

4.合作期间，甲方应对乙方的客户资料进行必要的保密，不得利用乙方的客户资源开展与乙方业务相关的业务；

5.甲方负责报关、报验、制单结汇等工作；

二、出口指标和相关考核

1.期限：_______年_______月至_______年_______月。

2.乙方承诺完成年出口任务_______万美元。甲方按出口金额每美元收取代理费_______元人民币；或按等值的代理费进行买断，买断比例为1美元：______人民币，采取买断式，乙方必须提供足额的增值税发票和专用缴款书。

三、基本规定

（一）甲方的权利和义务

1.按照甲方的标准合同格式负责对外出口合同的签订；

2.按照甲方标准合同格式与有关的供货单位签订代理出口合同；

3.负责报关、报验、投保、结汇以及有关文件的申领（应由乙方提供的文件除外）等工作,要求及时、准确；

4.按照代理出口合同约定的付款时间及时与供货单位结算货款；

5.按照本协议的有关规定及时向乙方分配其应得的利润。

（二）乙方的权利和义务

1.按照本协议业务操作的有关规定负责对外的磋商；

2.按照出口合同的有关规定负责出口货物的质量监督和把关工作，督促有关供货单位按时、按质交货并对有关供货方的质量承担担保连带责任；

3.及时向甲方提供与出口业务有关的文件或单据；

4.负责出口货物的安全收汇并对延迟收汇和不能收汇以及不能按时收汇核销承担全部的责任；

5.乙方应负责出口收汇核销单和出口退税文件的按时收回和交接工作。

6.乙方应负责逾期账款的催收工作并承担国外客户的理赔工作。

7.按照本协议的有关规定及时从甲方得到应分配的利润。

（三）业务操作的具体规定

1.由乙方具体负责出口业务的磋商和成交工作，对外签订出口合同须以甲方名义并使用甲方的标准出口合同格式。

2.出口合同的卖方和/或信用证的受益人是：________________________股份有限公司

注:在t/t汇款的情况下,应要求客户在汇款单上注明出口合同号码。

3.及时与有关的供货单位签订有关合同,合同中应对质量条款和具体的技术指标做重点规定特别是必须明确应在收到国外的货款后才能支付供货方货款或类似的条款；上述合同签订后，甲方应给乙方一份留存；

4.合作期间，甲方先行预付部分资金或垫付费用及预先垫付的退税等应按实收取财务利息, 预先垫付的退税利息按照财务利息(5.75‰)/月息× _______个月收取；

共2页，当前第1页12

进口协议

甲方：________________________

地址：________________________

法定代表人：__________________

电话：________________________

乙方：（工厂）________________

地址：________________________

法定代表人：__________________

电话：________________________

丙方：（外商）________________

地址：________________________

授权代表：____________________

电话：________________________

鉴于：

1.乙丙双方经友好协商，同意由乙方向丙方购买本协议及本协议所涉及合同项下的货物；且________________

2.乙方委托甲方向丙方进口上述货物，但出于某些技术上的原因，甲、乙双方于_____年_____月_____日就该批货物签订了_____号《买卖合同》（以下称“销售合同”）而非代理进口合同；且

3.乙方授权甲方就上述货物以甲方名义（而非乙方名义）与丙方于_____年_____月_____日签订了_____号《进口合同》（以下称“进口合同”）；且

4.甲乙丙三方均知悉并同意上述情况及做法：

甲乙丙三方就上述销售合同及进口合同中的某些问题，经友好协商，达成一致，兹签订本协议书。

甲、乙、丙三方同意：

a.如乙方未按照销售合同的规定将全部货款（分批交货、分批付款的，指每批货物的全部货款）付至甲方，甲方无义务按进口合同的规定向丙方支付任何货款，且免除任何有关延迟付款的违约责任，丙方无权依进口合同向甲方追索（究）任何货款（违约责任）。

b.甲方对有关货物的质量不承担任何责任。如乙方对货物质量有任何异议，应自行与丙方协商处理，而无权依销售合同向甲方追究任何违约责任；如需退换货，乙方可委托甲方办理，手续费另计。

c.丙方保证交付所给甲方的货物在产地，规品、数量等方面与进口合同的规定严格一致；如有不符，丙方应承担所有法律责任并赔偿甲方因此而遭受的海关处罚。

d.如销售合同及进口合同的规定与本协议不符，以本协议的规定为准。

甲方：__________________

授权人签字：____________

盖章：__________________

乙方：__________________

授权人签字：____________

盖章：__________________

丙方：__________________

授权人签字：____________

盖章：__________________

签订时间：______________

签订地点：______________

货物进口合同样本

18.延期交货违约金

late delivery and penalty

除双方认可的不可抗力因素外，卖方迟于合同规定的期限交货，如买方同意迟延交货，卖方应同意对信用证有关条款进行个性和同意银行在议付货款时扣除本条规定的违约金。违约金总值不超过货物总价值的5%，差率按7天0.5%计算，不满7天仍按7天计算。在未采用信用证支付的情况下，卖方应将前述方法计算的违约金即付买方。

if the sellers fail to make delivery on time as stipulated in the contract , with exception of force majeure, the buyers shall agree to postpone the delivery on conditions that the sellers agree to amend the clauses of the l/c and pay a penalty which shall be deducted by the paying bank from the payment under negotiation . the penalty , however , shall not exceed 5% of the total value of the goods . the rate of penalty is charged at 0.5%for every seven days , if less that seven days. in case , the payment is not made through l/c , the sellers shall pay the penalty counted as above to the buyers as soon as possible.

19.人力不可抗拒：如因人力不可抗拒的原因造成本合同全部或部分不能履约，卖方概不负责，但卖方应将上述发生的情况及

时通知买方。

force majeure : the sellers shall not hold any responsibility for partial or total non-performance of this contract due to force majeure . but the sellers shall advise the buyers on times of such occurrence.

20.争议之解决方式：

disputes settlement :

□任何因本合同而发生或与本合同有关的争议，应提交中国国际经济贸易仲裁委员会，按该会的仲裁规则进行仲裁。仲裁地点在中国深圳。仲裁裁决是终局的，对双方均有约束力。

all disputes arising out of the contract or in connection with the contract , shall be submitted to the china international economic and trade arbitration commission for arbitration in accordance with its rules of arbitration in shenzhen china . the arbitral award is final and binding upon both parties.

□

21.法律适用

law application :

本合同之签订地、或发生争议时货物所在地在中华人民共和国境内或被诉人为中国法人的，适用中华人民共和国法律，除此规定外，适用《联合国国际货物销售公约》。

it will be governed by the law of the people’s republic of china under the circumstances that the contract is singed or the goods while the disputes arising are in the people’s republic of china or the deffendant is chinese legal person , otherwise it is governed by united nations convention on contract for the international sale of goods .

22.本合同使用的fob、cfr、cif、ddu 术语系根据国际商会《incoterms 1990》

23.文字：本合同中、英两种文字具有同等法律效力，在文字解释上，若有异议，以中文解释为准。

versions : this contract is made out in both chinese and english of which version is equally effective .conflicts between these two language arising therefrom . if any , shall be subject to chinese version .

共5页，当前第4页12345

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

技术转让和设备、材料进口合同

中国_________产品进出口公司和_________产品生产厂（以下简称中方）与_________国_________公司（以下简投资人）和_________国_________有限公司（以下简称第三方）签订本合同，其条款如下：

第一条 技术转让

（1）中方为在_________生产投资人的甲型和乙型产品而引进必需的技术。这些产品以下简称为产品。

（2）投资人应中方要求按本合同提供其拥有的制造产品所需的技术和资料。

（3）产品的名称规格详见附件一。

（4）投资人应向中方提供制造产品所需的贸易秘密、制造技术和专有技术方面的资料。

（5）投资人向中方提供的资料详见附件二。

第二条 设备规划

（1）中方必须按照投资人的建议准备产品生产设施。

（2）为了帮助在_________准备生产设施，投资人应提供援助，包括供应下列资料：

a.生产线计划。

b.生产劳动力安排计划。

c.设备布局计划。

d.基础设施计划，如水电供应、空调、运输、通讯等。

e.设备安装操作计划。

f.生产管理计划。

g.推销计划。

上述资料应于本合同生效后_________天内由投资人提供中方。

（3）生产线必须按照附于本合同的生产细目表，即附件三。

（4）中方应自行准备生产计划，但必要时可要求投资人给予合作。

第三条 许可费的支付

（1）投资人向中方转让技术的许可费如下：

a.中方向投资人购买产品生产权应交入门费_________元。

b.每件出售的产品应向投资人交付售价_________%的提成费。

（2）一切付款应按照本合同及本条款的有关约定事项办理。

（3）一切付款应通过中国银行办理。

（4）支付方式采用不可撤销的即期信用证，用美元支付。

（5）中方应在本合同生效后_________天内，开立不可撤销的信用证向投资人支付入门费。

（6）投资人应在收到上述信用证后_________天内提供合同规定的一切技术资料。

（7）中方每次向投资人订购合同规定的材料时，应在信用证的金额中加上_________%的提成费；也可在支付货款时，为提成费另开一份信用证。

（8）中方负责在中国发生的一切费用；投资人负责在国外发生的一切费用。

第四条 销售

（1）投资人应帮助中方兴趣办展销会、研讨会、广告宣传等，以推销中方生产的产品。但费用应由中方负担。

（2）在开展广告宣传等活动中，中方如有需要可以使用投资人的广告标识。但投资人既不参与中方的盈亏，也不对此承担责任。

第五条 质量控制

（1）在_________制造产品的质量必须按照投资人的质量控制标准进行鉴定。

（2）_________制造产品的质量检验，在开始阶段应由双方工程是由联合进行，其细节详见附件四。

（3）_________制造产品的质量检验必要时应进行两次。如果第二次检验未能达到规格指标而且原因又是在投资人方面，则投资人应自费解决存在的问题。

（4）如果品质检验合格，双方工程是由应签署品质检验证明书一式_________份，每方各执_________份。

第六条 设备交货

（1）中方应向投资人购买生产产品所需的设备。

（2）生产产品所需设备的品名、规格详见附件五。

（3）中方投资人购买设备的价格细节由双方商定，并另签设备购买合同。

（4）投资人运交的设备应该是新型的、未用过的。

（5）投资人向中方运交设备的价款应以不可撤销的即期信用证按cif中国口岸条件用美元支付。

（6）投资人应按本合同的交货计划表运交设备。

（7）投资人应按合同的规定，向中方提供与设备有关的技术资料。

（8）设备正式交货日期为提单的日期。投资人应将提单号码、装船日期、装箱单、抵达日期等及时通知中方。同时，投资人还应将上述资料单据副本寄给中方。

（9）合同规定的设备和技术资料如有遗失，中方得要求投资人补交。

（10）投资人运交设备应使用坚固的包装，能以经受长途运输。

（11）投资人的装箱单应写明：

a.合同号码；b.收货人姓名；c.目的港；d.装船唛头；e.重量；f.箱号；g.收货人标记。

（12）投资人应将装货内容清单的副本放入包装内。

第七条 接收设备

（1）中方应准备设施和场地以接收和保管投资人运来的设备。

（2）投资人应在中方提出对运到的设备进行安装和试车的要求后三周内派出工程师。中方应为此事向投资人提供翻译之类的必要帮助。

（3）投资人的工程师应为安装试车任务停留两周。

（4）运交设备的验收工作，应由双方工程师和中国检验官员一起进行，详细规则见附件六。

（5）如果初次检验不合格，应进行第二次检验。如果第二次检验仍不合格，则投资人应在_________个月内自费调换有关设备。但是中方应该认识和接受这一点，即换货所需的时间长短要看所换的设备而定。

（6）如果检验合格，双方应签署检验证明书一式_________份，每方各执_________份。

（7）投资人派行往中方安装调试的工程师的居留费用均由投资人负担。

第八条 设备操作和保养的培训

（1）投资人在派遣工程到中方安装调试设备时，应兴举办关于设备操作和保养的培训。中方应为此事对投资人提供诸如翻译之类的帮助。

（2）培训的时间，包括前款所讲的安装调试在内不得超过_________天。

（3）培训主要用英文进行，也用_________作为辅助语言。中方如有需要应自费准备汉英翻译员。

（4）在中方进行设备操作保养培训的工程师的居留费用均由投资人负担。

第九条 对运交设备的保证

（1）按照国际习惯标准，运交设备的保证期为8个月，从中方完成验收工作起算。

（2）如果在保证期内发现运交的设备有缺点，投资人必须按中方的要求，及时适当解决。

（3）在上述情况下，该缺点经鉴定是由中方操作经验不足、搬运不当或某一物品的消耗所致，则投资人应要求中方支付实际运输费用。

（4）投资人应向中方提供与运交设备有关的最大限度的服务。

（5）保证期以后的设备保养需要向中方收取费用。但投资人应努力提供最大的合作和收取最低的费用。

第十条 物资的采购

（1）中方应按本合同的规定向投资人采购生产产品所需的材料。

（2）投资人应按本合同的规定向中方运交所需的材料。

（3）投资人应力求以尽可能低的价格供应这些材料。

（4）中方采购材料的实际详细品名，另以购买合同规定。

（5）投资人应该供应最新的材料，并保证质量。

（6）中方应提前_________个月向投资人送交月度生产计划和月度材料采购数量，以便材料的交货能以得到保证。

（7）投资人应尽力按照交货计划运交中方采购的材料；但是，中方应当理解和接受这样的事实，即由于市场供求不平衡等不能预见和不可避免的原因会使投资人无法按计划交货。

（8）中方对投资人运交材料的付款，必须采用不可撤销的信用证，以美元支付。

第十一条 材料的出口方法

（1）材料正式交货日期为提单的日期。投资人应将提单号码、装船日期、装箱单、抵达日期等及时通知中方。同时，投资人还应将上述资料单据副本寄给中方。

（2）投资人运交中方的材料如有任何遗失或缺点，应由投资人自费办妥。

（3）投资人运交材料应使用坚固的包装，能以经受长途运输。

（4）投资人的装箱单应写明：

a.合同号；b.收货人姓名；c.目的港；d.装船唛头；e.重量；f.箱号；g.收货人标记。

（5）投资人应将装货内容清单的副本放入包装内。

第十二条 接收材料

（1）中方应准备设施和场地以接收和保管投资人运交的材料。

（2）投资人应在材料经过品质检验之后发运。

（3）中方必须对运交的材料验收，如有缺陷或遗失，应及时通知投资人。如果投资人承认通知合理，应自费换货。但是，中方应当认识和接受这一点，即换货需要一段合理的时间。

（4）在上述情况下，该缺点经鉴定是由于中方的错误操作所致，投资人应要求中方支付一切实际费用。

（5）如果运交材料的坏遗失是由于存放或搬运不当所致，投资人应在收到中方通知后及时换货；但是，有关费用应由中方负担。

第十三条 培训中方的工程师

（1）投资人应接待_________名中方工程师，并提供_________个月的技术培训。

（2）投资人对中方工程师为此在_________国居留期间供给膳宿，但中_________之间的来回旅费除外。

（3）派出受训的中方工程师应懂得实用的英语，具有电子工程学的基础知识。

（4）教学主要用英语进行，但以_________为辅助语言。投资人应按中方要求准备一名汉英译员，费用由中方负担。

（5）投资人应立即编写教育计划并提前通知中方。有关技术教育计划项目详见附件七。

（6）第三方应同时派遣一名工程师去照料上述培训事宜。

第十四条 派遣投资人的工程师

（1）投资人应两次派遣多名工程师去中方，第一次派_________名去_________个月，以实施这项转让计划。第二次派_________名去_________个月，以达到产品生产指标。

（2）投资人派往中方的工程师主要用英语进行工作，但也以汉语为辅助语方。中方必要时应自费准备一名汉英翻译员。

（3）中方应负担投资人的工程师为此而在中国国内居留和旅行的各种费用，但中德之间的旅费除外。

（4）在投资人派遣工程师的任务完成以后，中方如有必要仍可要求投资人继续给予技术支持。但投资人应要求中方为这样增加的合作支付费用。合作的条款由双方将来讨论约定。

（5）中方要求投资人技术服务的细节，见附件八。

第十五条 将来的技术合作

（1）投资人应为将来的发展与中方进行合作，包括高分辩能力显示等在内。

（2）上述技术合的条款，包括它的费用，应由中方、投资人、第三方三方面商定并另签合同。

第十六条 第三方的作用

（1）第三方负责中方和投资人之间的信息传递、交往媒介等，并对中方提供必要的援助。

（2）第三方应为此适当向中方收取报酬。

第十七条 第三方的责任

（1）第三方应作为中方与投资人之间的桥梁。

（2）第三方应协助中方用展销会、研讨会、技术培训等办法在中国销售产品。

（3）第三方应在产品品质合格时考虑把这些产品销往欧洲和非洲（南非除外）。

（4）第三方应在中方派遣工程师到欧洲进行产品开发时，向他们提供免费使用的设施和工具。但中方应负担他们在欧洲的一切费用。

第十八条 仲裁

（1）中方和投资人应以合作的态度解决合同争端。如解决不成，则以仲裁方式最终解决。

（2）仲裁应在_________进行。

（3）中方和投资人都应受最终裁决的约束。

（4）仲裁费由败诉方负担。

（5）本合同如有某些问题仍在仲裁之中应该分开予以执行。

第十九条 税款

在合同有效期间，中国的税款由中方负责；欧洲的税款由投资人和第三方负责。

第二十条 合同的生效

（1）不可预见的问题不应影响本合同的执行。

（2）中方、投资人、第三方三方应向各自的政府申请允许有关商品的进口和出口。最后一方获知得批准之日即为本合同生效之日。三方应尽最大努力争取在_________天内取得批准。

第二十一条 合同的撤销

（1）如果在合同生效后_________个月没有见到效果，三方保留撤销本合同的权利。

（2）本合同从生效之日起有效_________年，期满后可以延长_________年。

第二十二条 使用的文字

本合同用中文和英文写成，两种文本具有同等效力。

第二十三条 合同附件

（1）如要修改合同，有关三方面应同意签订正式修改文件成为本合同的一部分。

（2）所有附件均属有效，并应成为本合同的一部分。

中方（盖章）：_________ 投资人（盖章）：_________

代表人（签字）：_________ 代表人（签字）：_________

_________年____月____日 _________年____月____日

第三方（盖章）：_________

代表人（签字）：_________

_________年____月____日

委托出口合同

合同编号：_________

签定地点：_________

签定日期：_________年_________月_________日

甲方（委托方）：_________

乙方（受托方）：_________

双方根据平等、互利、协商一致的原则，就甲方委托乙方办理出口商品业务事宜，签定本合同。

一、出口商品描述

1、商品名称：_________

2、品种规格：_________

3、数量：_________

4、价格条款：_________

5、总值：_________

二、甲方权利与义务

1、按照出口合同条款（编号_________）规定商品品质、数量、包装及时组织货物。

2、承担出口装船前的一切费用，并按乙方指令时间、数量将货物运至乙方指定的仓库或集装箱场地。

3、凡属商品质量、规格、数量、包装及交货期原因产生的客户索赔，并由此产生的一切经济损失由甲方负责。

4、必须保证所提供商品的商标、品牌、所涉及的专利及专有技术符合有关知识产权之规定。

5、如该商品享受国家的出口退税待遇，由乙方办理退税时，甲方需提供完整合法的增值税专用发票。

三、乙方权利与义务

1、与甲方共同制定对外成交合同条款，并负责对外签约。

2、随时掌握备货情况，负责接受国外客户开出的以甲方为受益人的不可撤销的信用证或以T/T方式汇来的货款。

3、办理出口货物报关、报检及制单结汇手续。

4、办理出口收汇核销手续。

5、如退税由甲方办理时，乙方需提供出口货物报关单（退税联）、出口发票和出口收汇核销单（退税联）。

6、乙方根据税务局认定的退税证明，可为甲方办理出口退税贷款。委托出口退税贷款协议另行签订。

四、收费标准及结算方式

1、乙方按出口商业发票的_________%收取委托手续费。

2、出口收汇后，乙方扣除委托手续费、报关、报检费和其它应收费用后与甲方结算。

3、经双方确认后，根据对方所提供的书面汇款指示以支票或汇票形式及时办理结算。

五、其它未尽事宜双方另行协商解决。

六、争议的处理

1、本合同受中华人民共和国法律管辖并按其进行解释。

2、本合同在履行过程中发生的争议，由双方当事人协商解决，也可由有关部门调解；协商或调解不成的，按下列第_________种方式解决：

（1）提交_________仲裁委员会仲裁；

（2）依法向人民法院起诉。

七、编号_________的出口合同为本合同不可分割的组成部分。

八、本合同自签定之日起生效，至双方结算完毕后终止。

九、本合同正本一式两份，双方各执一份，均具有同等法律效力。

甲方（盖章）：_________ 乙方（盖章）：_________

法定代表人（签字）：_________ 法定代表人（签字）：_________

委托代理人（签字）：_________ 委托代理人（签字）：_________

单位地址：_________ 单位地址：_________

电话：_________ 电话：_________

传真：_________ 传真：_________

开户银行：_________ 开户银行：_________

帐号：_________ 帐号：_________

邮政编码：_________ 邮政编码：_________

外贸合同范本英文

日期： 合同号码：

date: contract no.:

买 方： (the buyers) 卖方： (the sellers)

兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品：

this contract is made by and between the buyers and the sellers; whereby the buyers agree to buy and the sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter:

(1) 商品名称:

name of commodity：

(2) 数 量：

quantity:

(3) 单 价：

unit price:

(4) 总 值：

total value:

(5) 包 装：

packing:

(6) 生产国别：

country of origin :

(7) 支付条款：

terms of payment:

(8) 保 险：

insurance:

(9) 装运期限：

time of shipment:

(10) 起 运 港：

port of lading:

(11) 目 的 港：

port of destination:

(12)索赔：在货到目的口岸45天内如发现货物品质，规格和数量与合同不附，除属保险公司或船方

责任外，买方有权凭中国商检出具的检验证书或有关文件向卖方索赔换货或赔款。

claims:

within 45 days after the arrival of the goods at the destination, should the quality, specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable, the buyers shall, have the right on the strength of the inspection certificate issued by the c.c.i.c and the relative documents to claim for compensation to the sellers

(13)不可抗力：由于人力不可抗力的原由发生在制造，装载或运输的过程中导致卖方延期交货或不

能交货者，卖方可免除责任,在不可抗力发生后，卖方须立即电告买方及在14天内以

空邮方式向买方提供事故发生的证明文件，在上述情况下，卖方仍须负责采取措施尽

快发货。

force majeure :

the sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to force majeure, which might occur during the process of manufacturing or in the course of loading or transit. the sellers shall advise the buyers immediately of the occurrence mentioned above the within fourteen days there after . the sellers shall send by airmail to the buyers for their acceptancea certificate of the accident. under such circumstances the sellers, however, are still under the obligation to take all necessary measures to hasten the deliveryof the goods.

(14）仲裁：凡有关执行合同所发生的一切争议应通过友好协商解决，如协商不能解决，则将分歧提

交中国国际贸易促进委员会按有关仲裁程序进行仲裁，仲裁将是终局的，双方均受其约

束，仲裁费用由败诉方承担。

arbitration :

all disputes in connection with the execution of this contract shall be settled friendly through negotiation. in case no settlement can be reached, the case then may be submitted for arbitration to the arbitration commission of the china council for the promotion of international trade in accordance with the provisional rules of procedure promulgated by the said arbitration commission . the arbitration committee shall be final and binding upon both parties. and the arbitration fee shall be borne by the losing parties.

买方： 卖方:

--------------------- ---------------------

（授权签字） （授权签字）

货物进口合同样本

合同编号：_________________

contract no:_______________

签订日期：_________________

date:______________________

签订地点：_________________

signed at : _______________

电 话：____________________

tel: ______________________

传 真：____________________

fax:_______________________

电 报：____________________

cable: ____________________

电 传：____________________

telex: ____________________

电 话：____________________

tel: ______________________

传 真：____________________

fax:_______________________

电报：_____________________

cable: ____________________

电传：_____________________

telex: ____________________

经买双方确认根据下列条款订立本合同：

the undersigned sellers and buyers have confirmed this contract in accordance with the terms and conditions stipulated below :

1. 货号

art no. 名称及规格

descriptions 单位

unit 数量

quantity 单价

unit price 金额

amount

合计：_________________

totally：______________

总值（大写）：_____________________

total value:(in words)_____________

允许溢短____%。________% more or less in quantity and value allowed.

2.成交价格术语：

terms: □ fob □ cfr □ cif □ ddu □

3.出产国与制造商：___________________________

country of origin and manufacturers : ________

4.包装：__________________

packing: __________________

5.装运唛头：______________

shipping marks: ___________

6.装运港：________________

delivery port : ___________

7.目地港：________________

destination: ______________

8.转运：□ 允许 □ 不允许； 分批装运：□ 允许 □ 不允许

transhipments: □ allowed □ not allowed

partial shipments:□allowed □ not allowed

9.装运期：________________

shipment date: ____________

10.保险：由____按发票金额110%，投保_____险，另加保_____险。

insurance : to be covered by the for 110% of the invoice value covering additional

11.付款条件：

terms of payment:

□买方通过_____银行在____年____月____日前开出以卖方为受益人的_______期信用证。

the buyers shall open a letter of credit at sight through bank in favour of the sellers prior to .

□付款交单：买方应对卖方开具的以买方为付款人的见票后_____天付款跟单汇票，付款时交单。

documents against payment (d/p)

the buyers shall duly make the payment against documentary draft made out to the buyers at sight by the sellers.

□承兑交单：买方应对卖方开具的以买方为付款人的见票后_____天承兑跟单汇票，承兑时交单。

documents against acceptance: (d/p)

the buyers shall duly make the payment against documentary draft made out to the buyers at sight by the sellers.

□货到付款:买方在收到货物后____天内将全部货款支付卖方(不适用于fob、cfr、cif术语)。

共5页，当前第1页12345

货物出口合同范本英文版

出口合同是进口商出口商双方当事人依照法律通过协商就各自的在贸易上的权利和义务所达成的具有法律约束力的协议。出口商的出口合同是为销售产品而订立的合同，因此它也被称为销售确认书和销售合同。

今天第一范文网小编要与大家分享的是：货物出口的合同范本（英文版）。具体内容如下，欢迎参考阅读：

货物出口合同（英文版）

合约编号：________

ContractNO._______

售货合约

SALESCONTRACT

-------

买方：_____

日期：____年__月__日

Buyers:_____ cate:_____

卖方：____ 中国___进出口公司___省分公司

Sellers:ChinaNationalMetals&MineralsImport& Exportcorporation

,____Branch

双方同意按下列条款由买方购进卖方售出下列商品：

TheBuyersagreetobuyandtheSellersagreetosellthefollowing

goodsontermsandconditionssetforthbelow:

──────────────┬───────┬──────┬──────

(1)货物名称及规格，包装及│(2)数量 │(3)单价 │(4)总价

(5)装运期限

TimeofShipment:

(6)装运口岸

PortsofLoading

(7)目的口岸

PortofDestination:

(8)保险：投保___险，由___按发票金额___%，投保

Tnsurance:Covering Risksfor____%ofInvoiceValuetobeeffected

bythe

(9)付款条件：___……

TermsofPayment:___凭保兑的，不可撤消的，可转让的，可分割的即期付款信用证，信用证以中

国五金矿产进出口公司__分公司为受益人并允许分批装运和转船。

Byconfirmedirrevocable,transferableanddivisibleletterofcredit

infavourofChinaNationalMetals&MineralsImport& ExportCorporation

___Branchpayableatsightallowingpartialshipmentsandtranshipment.

该信用证必须在___前开到卖方，信用证的有效期应为装船期后15天，在上述装运口岸到期，

否则卖方有权取消本售货合约并保留因此而发生的一切损失的索赔权。

注意：开立信用证时，请在证内注明本售货确认书号码 ChinaNationalTextiesImportand

ExportCorporation

IMPORTANT:WhenestablishingL/C,please

indicatethemumberofthisSalescofr

SHANTUNGBRANCH

mationintheL/C.

买方(TheBuyers)：_____

卖方(TheSellers)：_____

＿＿＿＿公司（以下简称卖方）与＿＿＿＿＿公司（以下简称买方）订立合同如下：

第一条?合同标的

卖方卖出、买方购入商品。商品应符合下文第四款中所确定的清单nol。该清单的附件，是本合同不可分割的组成部分。

第二条?价格和合同总金额

在清单nol中所载明的商品，以美元计价。本合同总金额为＿＿＿＿。

商品价格包括运抵＿＿的一切费用，同时包括在独联体境外预付的包装、标记、装运、_____的费用。

第三条?供货期限和日期

商品应在卖方银行通知保兑的、与第二条所列金额相符的有效信用证时起60天内运往＿＿＿＿。

卖方有权提前供货，也有权视情况一次或几次供货。

第四条?商品品质

商品品质和数量由买卖双方以书面协议确定，在本合同附件清单nol中载明。清单nol附在本合同上（见第一条）。

第五条?包装和标记

商品包装应在符合规定的标准和技术条件，保证货物在运输途中所做的必要处理过程中完好无损。

每件货物应有以下标记：

＿＿＿＿到达站名称：

＿＿＿＿卖方名称；

＿＿＿＿买方名称；

＿＿＿＿货件号；

＿＿＿＿毛重；

＿＿＿＿净重；体积（用立方米表示）。

第六条?支付

买方应在本合同签订后20个工作日内开立以卖方为受益人、不可撤销的、可分割的、可转让的跟单信用证。该信用证的总金额在合同第二条中载明，其有效期至少80天。

信用证由卖方选择的、法律上承认的＿＿＿＿银行开立并确认。以信用证付款凭卖方向银行提交以下单据进行：

＿＿＿＿＿发票一式三份；

＿＿＿＿＿_____买方名义下的运输单；

＿＿＿＿＿包装单一式三份；

＿＿＿＿＿本合同副本；

＿＿＿＿＿在独联体境内的一切银行费用由买方负担，在独联体境外的一切银行费用由卖方负担。

第七条?商品的交接

所有商品应由检查人员进行必要的数量和品质检查。

检查人员的结论是最终结论、买卖双方不得对此有争议。

余下部分买方可以拒收和退还，买方应单独保管其拒收的商品，并对此承担责任，便于卖方、供货人和检查人员进行可能的检查。如果确定拒收成立，对商品的责任自动转移给卖方，由卖方自行决定商品的处理，商品的保管费由供货人支付。

第八条?_____

根据上文第二条由＿＿＿＿对商品在运抵＿＿＿＿港之前进行_____。

第九条?品质保证

商品品质应符合清单nol（见上文第四条）。买方没有义务接收不符合清单nol（见第四条）的商品。

买方可以不加解释和不出示证据还未被接收的商品（见下文第十条）。

根据下文第十条，卖方应在收到买方理由充分的索赔书时起30天内如数更换未被接收的商品，以保证完全按照本合同规定运送货物。

第十条?索赔

商品运到时，买方有权就商品的数量向卖方提出索赔（见第七条），反之，买方接收共同指定的检查员确定的数量的商品。买方可以就商品品质不合格向卖方提出索赔。所有运抵的商品如果没有以适当的方式拒收或退回，都被认为买方已经接收。

有充分理由退还的拒收的商品都被认为卖方供货不足，同时免除对买方就拒收商品的支付或赔偿提出任何异议。检查员最终确定有充分理由拒收和退回商品的数量。

在商品原封不动或无损坏退还卖方的情况下，未超出检查员确定的界限的商品的拒收，无需经商品不合格证明，在规定的期限内，根据必要的手续，应由卖方无条件承认。

买方索赔函用挂号信寄给卖方。

就某一批商品提出索赔，不能成为索方拒收和拒付根据本合同所规定的其他应供应的商品的理由。

第十一条?不可抗力

出现不可抗力，即火灾、自然灾害、封锁、禁止进出口和其他合同双方人力不可抗拒的情况造成合同某一方不能完全或部分履行合同义务时，按不可抗力与其后果存在的时间推迟履行合同义务。

第十二条?罚则

如违反本合同规定的货物抵达期限，卖方应向买方支付罚金。罚金数额规定如下：

－－在最初三周内每过期一个日历周支付未交商品总金额的＿＿＿％；

－－以后每过期一个日历周支付未交商品总金额的＿＿％，但罚金总额不能超过未交商品总金额的＿＿＿％。

第十三条?其他条件

任何一方在没有征得另一方书面同意的情况下不得将自己对本合同的权利和义务转让给第三者，尽管信用证可以转让，是可以按规定程序转让的。

应当先履行债务的一方当事人，有证据证明对方有下列情形之一的，可以中止履行：

（1）经营状况严重恶化的；

（2）转移财产、抽逃资金，以逃避债务的；

（3）严重丧失商业信誉的；

（4）有其他丧失或可能丧失履行债务能力情形的。

对合同的一切修改和补充意识只有以书面形式形成并经双方签字后才有效。给双方确认的往来信函、传真电子邮件等，将作为本合同的组成部分，具有合同的效力。

在独联体境内的一切费用和规费，包括海关规费和关税，与订立、履行本合同有关的费用，由买方承担，在独联体境外，则由卖方承担。

本合同用中、俄两种文字书就，两种文本具有同等法律效力。

第十四条?_____

由本合同派生或与本合同有关的一切争议和分歧适用中国法律，由国际_____机构审理。

第十五条?双方法定地址

卖方：＿＿＿＿＿＿买方：＿＿＿＿＿＿

＿＿＿＿年＿＿月＿＿日

一般货物出口合同格式（附英文）

合同号码： 签约日期： 买方： 卖方： 本合同由买卖双方缔结，用中、英文字写成，两种文体具有同等效力，按照下述条款，卖方同意售出买方同意购进以下商品： 「章名」 第一部分 1.商品名称及规格 2.生产国别及制造厂商 3.单价（包装费用包括在内） 4.数量 5.总值 6.包装（适合海洋运输） 7.保险（除非另有协议，保险均由买方负责） 8.装船时间 9.装运口岸 10.目的口岸 11.装运唛头，卖方负责在每件货物上用牢固的不褪色的颜料明显地刷印或标明下述唛头，以及目的口岸、件号、毛重和净重、尺码和其它买方要求的标记。如系危险及/或有毒货物，卖方负责保证在每件货物上明显地标明货物的性质说明及习惯上被接受的标记。 12.付款条件：买方于货物装船时间前一个月通过＿＿＿＿＿＿银行开出以卖方为抬头的不可撤销信用证，卖方在货物装船启运后凭本合同交货条款第18条A款所列单据在开证银行议付贷款。上述信用证有效期将在装船后15天截止。 13.其它条件：除非经买方同意和接受，本合同其它一切有关事项均按第二部分交货条款之规定办理，该交货条款为本合同不可分的部分，本合同如有任何附加条款将自动地优先执行附加条款，如附加条款与本合同条款有抵触，则以附加条款为准。 「章名」 第二部分 「章名」 14.FOB/FAS条件 14.1.本合同项下货物的装运舱位由买方或买方的运输代理人＿＿＿＿＿＿＿＿＿＿＿租订。 14.2.在FOB条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期装上买方所指定的船只。 14.3.在FAS条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期交到买方所指定船只的吊杆下。 14.4.货物装运日前10－15天，买方应以电报或电传通知卖方合同号、船只预计到港日期、装运数量及船运代理人的名称。以便卖方经与该船运代理人联系及安排货物的装运。卖方应将联系结果通过电报或电传及时报告买方。如买方因故需要变更船只或者船只比预先通知卖方的日期提前或推迟到达装运港口，买方或其船运代理人应及时通知卖方。卖方亦应与买方的运输代理或买方保持密切联系。 14.5.如买方所订船只到达装运港后，卖方不能在买方所通知的装船时间内将货物装上船只或将货物交到吊杆之下，卖方应负担买方的一切费用和损失，如空舱费、滞期费及由此而引起的及/或遭受的买方的一切损失。 14.6.如船只撤换或延期或退关等而未及时通知卖方停止交货，在装港发生的栈租及保险费损失的计算，应以代理通知之装船日期（如货物晚于代理通知之装船日期抵达装港，应以货物抵港日期）为准，在港口免费堆存期满后第十六天起由买方负担，人力不可抗拒的情况除外。上述费用均凭原始单据经买方核实后支付。但卖方仍应在装载货船到达装港后立即将货物装船，交负担费用及风险。 「章名」 15.C＆F条件 15.1.卖方在本合同第8条规定的时间之内应将货物装上由装运港到中国口岸的直达船。未经买方事先许可，不得转船。货物不得由悬挂中国港口当局所不能接受的国家旗帜的船装载。 15.2.卖方所租船只应适航和适货。卖方租船时应慎重和认真地选择承运人及船只。买方不接受非保赔协会成员的船只。 15.3.卖方所租载货船只应在正常合理时间内驶达目的港。不得无故绕行或迟延。 15.4.卖方所租载货船只船龄不得超过15年。对超过15年船龄的船只其超船龄额外保险费应由卖方负担。买方不接受船龄超过二十年的船只。 15.5.一次装运数量超过一千吨的货载或其它少于一千吨但买方指明的货载，卖方应在装船日前至少10天用电传或电报通知买方合同号、商品名称、数量、船名、船龄、船籍、船只主要规范、预计装货日、预计到达目的港时间、船公司名称、电传和电报挂号。 15.6.一次装运一千吨以上货载或其它少于一千吨但买方指明的货载，其船长应在该船抵达目的港前7天和24小时分别用电传或电报通知买方预计抵港时间、合同号、商品名称及数量。 15.7.如果货物由班轮装运，载货船只必须是＿＿＿＿＿＿船级社最高船级或船级协会条款规定的相同级别的船级，船只状况应保持至提单有效期终了时止，以装船日为准船龄不得超过20年。超过20年船龄的船只，卖方应负担超船龄外保险费。买方绝不接受超过25年船龄的船只。 15.8.对于散件货，如果卖方未经买方事前同意而装入集装箱，卖方应负责向买方支付赔偿金，由双方在适当时间商定具体金额。 15.9.卖方应和载运货物的船只保持密切联系，并以最快的手段通知买方船只在途中发生的一切事故，如因卖方未及时通知买方而造成买方的一切损失卖方应负责赔偿。 「章名」 16.CIF条件 在CIF条件下，除本合同第15条C＆F条件适用之外卖方负责货物的保险，但不允许有免赔率。 「章名」 17.装船通知 货物装船完毕后48小时内，卖方应即以电报或电传通知买方合同号、商品名称、所装重量（毛/净）或数量、发票价值、船名、装运口岸、开船日期及预计到达目的港时间。如因卖方未及时用电报或电传给买方以上述装船通知而使买方不能及时保险，卖方负责赔偿买方由此而引起的一切损害及/或损失。 「章名」 18.装船单据 18.A.卖方凭下列单据向付款银行议付货款： 18.A.1.填写通知目的口岸的＿＿＿＿＿＿＿＿＿＿运输公司的空白抬头、空白背书的全套已装运洋轮的清洁提单（如系C＆F/CIF条款则注明“运费已付”，如系FOB/FAS条款则注明“运费待收”）。 18.A.2.由信用证受益人签名出具的发票5份，注明合同号、信用证号、商品名称、详细规格及装船唛头标记。 18.A.3.两份由信用证受益人出具的装箱单及/或重量单，注明每件货物的毛重和净重及/或尺码。 18.A.4.由制造商及/或装运口岸的合格、独立的公证行签发的品质检验证书及数量或重量证书各两份，必须注明货物的全部规格与信用证规定相符。 18.A.5.本交货条件第17条规定的装船通知电报或电传副本一份。 18.A.6.证明上述单据的副本已按合同要求寄出的书信一封。 18.A.7.运货船只的国籍已经买主批准的书信一封。 18.A.8.如系卖方保险需提供投保不少于发票价值110％的一切险和战争险的保险单。 18.B.不接受影印、自动或电脑处理、或复印的任何正本单据，除非这些单据印有清晰的“正本”字样，并经发证单位授权的领导人手签证明。 18.C.联运提单、迟期提单、简式提单不能接受。 18.D.受益人指定的第三者为装船者不能接受，除非该第三者提单由装船者背书转受益人，再由受赠人背书后方可接受。 18.E.信用证开立日期之前出具的单据不能接受。 18.F.对于C＆F/CIF货载，不接受租船提单，除非受益人提供租船合同、船长或大副收据、装船命令、货物配载图及或买方在信用证内所要求提供的其它单据副本各一份。 18.G.卖方须将提单、发票及装箱单各两份副本随船带交目的口岸的买方收货代理人＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿。 18.H.载运货船启碇后，卖方须立即航空邮寄全套单据副本一份给买方，三份给目的口岸的对外贸易运输公司分公司。 18.I.卖方应负责赔偿买方因卖方失寄或迟寄上述单据而使买方遭受的一切损失。 18.J.中华人民共和国境外的银行费用由卖方负担。 「章名」 19.合同所订货物如用空运，则本合同有关海运的一切条款均按空运条款执行。 「章名」 20.危险品说明书 凡属危险品及/或有毒，卖方必须提供其危险或有毒性能、运输、仓储和装卸注意事项以及防治、急救、消防方法的说明书，卖方应将此项说明书各三份随同其他装船单据航空邮寄给买方及目的口岸的＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿运输公司。 「章名」 21.检验和索赔 货物在目的口岸卸毕60天内（如果用集装箱装运则在开箱后60天）经中国进出口商品检验局复验，如发现品质、数量或重量以及其它任何方面与本合同规定不符，除属于保险公司或船行负责者外，买方有权凭上述检验局出具的检验证书向卖方提出退货或索赔。因退货或索赔引起的一切费用包括检验费、利息及损失均由卖方负担。在此情况下，凡货物适于抽样及寄送时如卖方要求，买方可将样品寄交卖方。 「章名」 22.赔偿费 因“人力不可抗拒”而推迟或不能交货者除外，如果卖方不能交货或不能按合同规定的条件交货，卖方应负责向买方赔偿由此而引起的一切损失和遭受的损害，包括买价及/或买价的差价、空舱费、滞期费，以及由此而引起的直接或间接损失。买方有权撤销全部或部分合同，但并不妨碍买方向卖方提出索赔的权利。 「章名」 23.赔偿例外 由于一般公认的“人力不可抗拒”原因而不能交货或延迟交货，卖方或买方都不负责任。但卖方应在事故发生后立即用电报或电传告买方并在事故发生后15天内航空邮寄买方灾害发生地点之有关政府机关或商会所出具的证明，证实灾害存在。如果上述“人力不可抗拒”继续存在60天以上，买方有权撤销合同的全部或一部。 「章名」 24.仲裁 双方同意对一切因执行和解释本合同条款所发生的争议，努力通过友好协商解决。在争议发生之日起一个合理的时间内，最多不超过90天，协商不能取得对买卖双方都满意的结果时，如买方决定不向他认为合适的有管辖权的法院提出诉讼，则该争议应提交仲裁。除双方另有协议，仲裁应在中国北京举行，并按中国国际贸易促进委员会对外贸易仲裁委员会所制订的仲裁规则和程序进行仲裁，该仲裁为终局裁决，对双方均有约束力。仲裁费用除非另有决定，由败诉一方负担。 卖方： 买方： 「名称」 1. PURCHASE CONTRACT 「题注」 「章名」 Whole Doc. Contract No： Date： The Buyer： The Seller： The Contract， made out， in Chinese and English， both version being equally authentic， by and between the Seller and the Buyer whereby the Seller agrees to sell and the Buyer agrees to buy the undermentioned goods subject to terms and conditions set forth hereinafter as follows： 「章名」 SECTION 1 1 Name of Commodity and specification 2 Country of Origin & Manufacturer 3 Unit Price （packing charges included） 4 Quantity 5 Total Value 6 Packing （seaworthy） 7 Insurance （to be covered by the Buyer unless otherwise） 8 Time of Shipment 9 Port of Loading 10 Port of Destination mark shown as below in addition to the port of destination， package number， gross and net weights， measurements and other marks as the Buyer may require stencilled or marked conspicuously with fast and unfailing pigments on each package. In the case of dangerous and/or poisonous cargo （es）， the Seller is obliged to take care to ensure that the nature and the generally adopted symbol shall be marked conspicuously on each package. 12 Terms of Payment： One month prior to the time of shipment the Buyer shall open with the Bank of _______an irrevocable Letter of Credit in favour of the Seller payable at the issuing bank against presentation of documents as stipulated under Clause 18. A. of SECTION II， the Terms of Delivery of this Contract after departure of the carrying vessel. The said Letter of Credit shall remain in force till the 15th day after shipment. 13 Other Terms： Unless otherwise agreed and accepted by the Buyer， all other matters related to this contract shall be governed by Section II， the Terms of Delivery which shall form an integral part of this Contract. Any supplementary terms and conditions that may be attached to this Contract shall automatically prevail over the terms and conditions of this Contract if such supplementary terms and conditions come in conflict with terms and conditions herein and shall be binding upon both parties. FOR THE SELLER FOR THE BUYER 「章名」 SECTION 2 「章名」 14 FOB/FAS TERMS 14.1 The shipping space for the contracted goods shall be booked by the Buyer or the Buyer‘s shipping agent __________. 14.2 Under FOB terms， the Seller shall undertake to load the contracted goods on board the vessel nominated by the Buyer on any date notified by the Buyer， within the time of shipment as stipulated in Clause 8 of this Contract. 14.3 Under FAS terms， the Seller shall undertake to deliver the contracted goods under the tackle of the vessel nominated by the Buyer on any date notified by the Buyer， within the time of shipment as stipulated in Clause 8 of this Contract. 14.4 10-15 days prior to the date of shipment， the Buyer shall inform the Seller by cable or telex of the contract number， name of vessel， ETA of vessel， quantity to be loaded and the name of shipping agent， so as to enable the Seller to contact the shipping agent direct and arrange the shipment of the goods. The Seller shall advise by cable or telex in time the Buyer of the result thereof. Should， for certain reasons， it become necessary for the Buyer to replace the named vessel with another one， or should the named vessel arrive at the port of shipment earlier or later than the date of arrival as previously notified to the Seller， the Buyer or its shipping agent shall advise the Seller to this effect in due time. The Seller shall also keep in close contact with the agent or the Buyer. 14.5 Should the Seller fail to load the goods on board or to deliver the goods under the tackle of the vessel booked by the Buyer. Within the time as notified by the Buyer， after its arrival at the port of shipment the Seller shall be fully liable to the Buyer and responsible for all losses and expenses such as dead freight， demurrage. Consequential losses incurred upon and/or suffered by the Buyer. 14.6 Should the vessel be withdrawn or replaced or delayed eventually or the cargo be shutout etc.， and the Seller be not informed in good time to stop delivery of the cargo， the calculation of the loss in storage expenses and insurance premium thus sustained at the loading port shall be based on the loading date notified by the agent to the Seller （or based on the date of the arrival of the cargo at the loading port in case the cargo should arrive there later than the notified loading date）。 The abovementioned loss to be calculated from the 16th day after expiry of the free storage time at the port should be borne by the Buyer with the exception of Force Majeure. However， the Seller shall still undertake to load the cargo immediately upon the carrying vessel‘s arrival at the loading port at its own risk and expenses. The payment of the afore-said expenses shall be effected against presentation of the original vouchers after the Buyer’s verification. 「章名」 15 C&F Terms 15.1 The Seller shall ship the goods within the time as stipulated in clause 8 of this Contract by a direct vessel sailing from the port of loading to China port. Transhipment on route is not allowed without the Buyer‘s prior consent. The goods shall not be carried by vessels flying flags of countries not acceptable to the Port Authorities of China. 15.2 The carrying vessel chartered by the Seller shall be seaworthy and cargoworthy. The Seller shall be obliged to act prudently and conscientiously when selecting the vessel and the carrier when chartering such vessel. The Buyer is justified in not accepting vessels chartered by the Seller that are not members of the PICLUB. 15.3 The carrying vessel chartered by the Seller shall sail and arrive at the port of destination within the normal and reasonable period of time. Any unreasonable aviation or delay is not allowed. 15.4 The age of the carrying vessel chartered by the Seller shall not exceed 15 years. In case her age exceeds 15 years， the extra average insurance premium thus incurred shall be borne by the Seller. Vessel over 20 years of age shall in no event be acceptable to the Buyer. 15.5 For cargo lots over 1，000 M/T each， or any other lots less than 1，000 metric tons but identified by the Buyer， the Seller shall， at least 10 days prior to the date of shipment， inform the Buyer by telex or cable of the following information： the contract number， the name of commodity， quantity， the name of the carrying vessel， the age， nationality， and particulars of the carrying vessel， the expected date of loading， the expected time of arrival at the port of destination， the name， telex and cable address of the carrier. 15.6 For cargo lots over 1，000 M/T each， or any other lots less than 1，000 metric tons but identified by the Buyer， the Master of the carrying vessel shall notify the Buyer respectively 7 （seven） days and 24 （twenty-four） hours prior to the arrival of the vessel at the port of destination， by telex or cable about its ETA （expected time of arrival）， contract number， the name of commodity， and quantity. 15.7 If goods are to be shipped per liner vessel under liner Bill of Lading， the carrying vessel must be classified as the highest ____________ or equivalent class as per the Institute Classification Clause and shall be so maintained throughout the duration of the relevant Bill of Lading. Nevertheless， the maximum age of the vessel shall not exceed 20 years at the date of loading. The seller shall bear the average insurance premium for liner vessel older than 20 years. Under no circum -stances shall the Buyer accept vessel over 25 years of age. 15.8 For break bulk cargoes， if goods are shipped in containers by the Seller without prior consent of the Buyer， a compensation of a certain amount to be agreed upon by both parties shall be payable to the Buyer by the Seller. 15.9 The Seller shall maintain close contact with the carrying vessel and shall notify the Buyer by fastest means of communication about any and all accidents that may occur while the carrying vessel is on route. The Seller shall assume full responsibility and shall compensate the Buyer for all losses incurred for its failure to give timely advice or notification to the Buyer. 「章名」 16 CIF Terms： Under CIF terms， besides Clause 15 C&F Terms of this contract which shall be applied the Seller shall be responsible for covering the cargo with relevant insurance with irrespective percentage. 「章名」 17 Advice of Shipment： Within 48 hours immediately after completion of loading of goods on board the vessel the Seller shall advise the Buyer by cable or telex of the contract number， the name of goods， weight （net/gross） or quantity loaded， invoice value， name of vessel， port of loading， sailing date and expected time of arrival （ETA） at the port of destination. Should the Buyer be unable to arrange insurance in time owing to the Seller‘s failure to give the above mentioned advice of shipment by cable or telex， the Seller shall be held responsible for any and all damages and/or losses attributable to such failure. 「章名」 18 Shipping Documents 18.A The Seller shall present the following documents to the paying bank for negotiation of payment： 18.A.1 Full set of clean on board， “freight prepaid” for C&F/CIF Terms or “Freight to collect” for FOB/FAS Terms， Ocean Bills of Lading， made out to order and blank endorsed， notifying ___________at the port of destination. 18.A.2 Five copies of signed invoice， indicating contract number， L/C number， name of commodity， full specifications， and shipping mark， signed and issued by the Beneficiary of Letter of Credit. 18.A.3 Two copies of packing list and/or weight memo with indication of gross and net weight of each package and/or measurements issued by beneficiary of Letter of Credit. 18.A.4 Two copies each of the certificates of quality and quantity or weight issued by the manufacturer and/or a qualified independent surveyor at the loading port and must indicate full specifications of goods conforming to stipulations in Letter of Credit. 18.A.5 One duplicate copy of the cable or telex advice of shipment as stipulated in Clause 17 of the Terms of Delivery. 18.A.6 A letter attesting that extra copies of abovementioned documents have been dispatched according to the Contract. 18.A.7 A letter attesting that the nationality of the carrying vessel has been approved by the Buyer. 18.A.8 The relevant insurance policy covering， but not limited to at least 110% of the invoice value against all and war risks if the insurance is covered by the Buyer. 18.B Any original document（s） made by rephotographic system， automated or computerized system or carbon copies shall not be acceptable unless they are clearly marked as “ORIGINAL.” and certified with signatures in hand writing by authorised officers of the issuing company or corporation. 18.C Through Bill of Lading， Stale Bill of Lading， Short Form Bill of Lading， shall not be acceptable. 18.D Third Party appointed by the Beneficiary as shipper shall not be acceptable unless such Third Party Bill of Lading is made out to the order of shipper and endorsed to the Beneficiary and blank endorsed by the Beneficiary. 18.E Documents issued earlier than the opening date of Letter of Credit shall not be acceptable. 18.F In the case of C&F/CIF shipments， Charter Party Bill of Lading shall not be acceptable unless Beneficiary provides one copy each of the Charter Party， Master‘s of Mate’s receipt， shipping order and cargo or stowage plan and/or other documents called for in the Letter of Credit by the Buyer. 18.G The seller shall dispatch， in care of the carrying vessel， two copies each of the duplicates of Bill of Lading. Invoice and Packing List to the Buyer‘s receiving agent， _______________at the port of destination. 18.H Immediately after the departure of the carrying vessel， the Seller shall airmail one set of the duplicate documents to the Buyer and three sets of the same to ______________________________ Transportation Corporation at the port of destination. 18.I The Seller shall assume full responsibility and be liable to the Buyer and shall compensate the Buyer for all losses arising from going astray of and/or the delay in the dispatch of the above mentioned documents. 18.J Banking charges outside the People‘s Republic of China shall be for the Seller’s account. 「章名」 19 If the goods under this Contract are to be dispatched by air， all the terms and conditions of this Contract in connection with ocean transportation shall be governed by relevant air terms. 「章名」 20 Instruction leaflets on dangerous cargo： For dangerous and/or poisonous cargo， the Seller must provide instruction leaflets stating the hazardous or poisonous properties， transportation， storage and handling remarks， as well as precautionary and first-air measures and measures against fire. The Seller shall airmail， together with other shipping documents， three copies each of the same to the Buyer and___________________ Transportation Corporation at the port of destination. 「章名」 21 Inspection & claims： In case the quality， quantity or weight of the goods be found not in conformity with those as stipulated in this Contract upon re-inspection by the China Commodity Import and Export inspection Bureau within 60 days after completion of the discharge of the goods at the port of destination or， if goods are shipped in containers， 60 days after the opening of such containers， the Buyer shall have the right to request the Seller to take back the goods or lodge claims against the Seller for compensation for losses upon the strength of the Inspection Certificate issued by the said Bureau， with the exception of those claims for which the insurers or owners of the carrying vessel are liable， all expenses including but not limited to inspection fees， interest， losses arising from the return of the goods or claims shall be borne by the Seller. In such a case， the Buyer may， if so requested， send a sample of the goods in question to the Seller， provided that sampling and sending of such sample is feasible. 「章名」 22 Damages： With the exception of late delivery or non-delivery due to “Force Majeure” causes， if the Seller fails to make delivery of the goods in accordance with the terms and conditions， jointly or severally， of this Contract， the Seller shall be liable to the Buyer and indemnify the Buyer for all losses， damages， including but not limited to， purchase price and/or purchase price differentials， deadfreight， demurrage， and all consequential direct or indirect losses. The Buyer shall nevertheless have the right to cancel in part or in whole of the contract without prejudice to the Buyer‘s right to claim compensations. 「章名」 23 Force Majeure： Neither the Seller or the Buyer shall be held responsible for late delivery or non-delivery owing to generally recognized “Force Majeure”causes. However in such a case， the Seller shall immediately advise by cable or telex the Buyer of the accident and airmail to the Buyer within 15 days after the accident， a certificate of the accident issued by the competent government authority or the chamber of commerce which is located at the place where the accident occurs as evidence thereof. If the said “Force Majeure” cause lasts over 60 days， the Buyer shall have the right to cancel the whole or the undelivered part of the order for the goods as stipulated in Contract. 「章名」 24 Arbitration： Both parties agree to attempt to resolve all disputes between the parties with respect to the application or interpretation of any term hereof of transaction hereunder， through amicable negotiation. If a dispute cannot be resolved in this manner to the satisfaction of the Seller and the Buyer within a reasonable period of time， maximum not exceeding 90 days after the date of the notification of such dispute， the case under dispute shall be submitted to arbitration if the Buyer should decide not to take the case to court at a place of jurisdiction that the Buyer may deem appropriate. Unless otherwise agreed upon by both parties， such arbitration shall be held in ________， and shall be governed by the rules and procedures of arbitration stipulated by the Foreign Trade Arbitration Commission of the China Council for the Promotion of International Trade. The decision by such arbitration shall be accepted as final and binding upon both parties. The arbitration fees shall be borne by the losing party unless otherwise awarded.

外贸出口合同样本

（11）保险：按发票110％保全险及战争险。由客户自理。

（12）买方须于＿＿年＿＿月＿＿日前开出本批交易信用证，否则，售方有权：不经通知取消本合同，或接受买方对本约未执行的全部或一部，或对因此遭受的损失提出索赔。

（13）单据：卖方应向议付银行提供已装船清洁提单、发票、中国商品检验局或工厂出具的品质证明、中国商品检验局出具的数量/重量签定书；如果本合同按cif条件，应再提供可转让的保险单或保险凭证。

（14）凡以cif条件成交的业务，保额为发票价值的110％，投保险别以本售货合同中所开列的为限，买方如要求增加保额或保险范围，应于装船前经售方同意，因此而增加的保险费由买方负责。

（15）质量、数量索赔：如交货质量不符，买方须于货物到达目的港30日内提出索赔；数量索赔须于货物到达目的港15日内提出。对由于保险公司、船公司和其它转运单位或邮政部门造成的损失卖方不承担责任。

（16）本合同内所述全部或部份商品，如因人力不可抗拒的原因，以致不能履约或延迟交货，售方概不负责。

（17）仲裁：凡因执行本合同或与本合同有关事项所发生的一切争执，应由双方通过友好方式协商解决。如果不能取得协议时，则在中国国际经济贸易仲裁委员会根据该仲裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的，对双方具有同等约束力。仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。仲裁也可在双方同意的第三国进行。

（18）买方在开给售方的信用证上请填注本确认书号码。

（19）其它条款：卖方：买方：

2. sales contract

whole doc.

no: date: for account of:

indent no:

this contract is made by and between the sellers and the buyers; whereby the sellers agree to sell and the buyers agree to buy the undermentioned goods according to the terms and conditions stipulated below and overleaf:

(1) names of commodity (ies) and specification(s)

(2) quantity

(3) unit price

(4) amount total: __________% more or less allowed

(5) packing:

(6) port of loading:

(7) port of destination:

(8) shipping marks:

(9) time of shipment: within ____________________days after receipt of l/c, allowing transhipment and partial shipment.

(10) terms of payment: by 100% confirmed, irrevocable and sight letter of credit to remain valid for negotiation in china until the 15th day after shipment.

(11) insurance: covers all risks and war risks only as per the clauses of the peoples insurance company of china for 110% of the invoice value. to be effected by the buyer.

(12) the buyer shall establish the covering letter of credit before _________; failing which, the seller reserves the right to rescind this sales contract without further notice, or to accept whole or any part of this sales contract, non-fulfilled by the buyer, of to lodge claim for direct losses sustained, if any

共16页，当前第2页12345678910111213141516

海运出口运输合作协议

8.3 货物出运后，乙方要求退运，或更改目的港，或中转港更改运输方式的，须经双方书面确认及有关费用，而乙方尚未於上海预结算费用前，甲方有权暂停执行上述更改要求，期间所产生之额外经济损失由乙方自行承担。

8.4 乙方目的港收货人，经甲方目的港代理通知后，如逾期未提货，目的港产生之额外费用由乙方目的港收货人全部自行承担。如若乙方目的港收货人放弃货物，则由乙方承担目的港所产生的一切费用。

九、本协议于是_________年_________月_________日于_________签订。

甲方（公章）：_________

代表（签字）：_________

_________年____月____日

乙方（公章）：_________

代表（签字）：_________

_________年____月____日

共3页，当前第3页123

签约地点：________________________________

日期：____________________________________

卖方：___________________________________

地址：____________________________________

电话：____________________________________

传真：____________________________________

电子邮箱：_______________________________

买方：___________________________________

地址：____________________________________

电话：____________________________________

传真：____________________________________

电子邮箱：_______________________________

买卖双方经协商同意按下列条款成交：

1.货物名称、规格和质量：________________________________________

2.数量：______________________________

3.单价及价格条款：______________________________

（除非另有规定，“fob”、“cfr”和“cif”均应依照国际商会制定的《20__年国际贸易术语解释通则》（incoterms20__）办理。）

4.总价：______________________________

5.允许溢短装：______%.

6.装运期限

收到可以转船及分批装运之信用证______天内装运。

7.付款条件

买方须于_______前将保兑的

进口合同(样式一)

（3）金额为合同总价的形式发票一式六份。

（4）即期汇票一式二份。

（5）商业发票一式六份。

上述单据卖方应于本合同生效日起三十天内提交。

4.2.2 合同总的＿＿％，计＿＿（大写：＿＿），在卖按本合同第五章规定交货时，买方在收到卖方提交的下列单据经审核无误后不迟于三十天，将每批交货总价的＿＿％支付给卖方：

（1）全套清洁无疵、空白抬头、空白背书并注明“运费到付通知目的港中国对外贸易运输公司”的海运提单正本三份，副本三份；

（2）商业发票一式六份；

（3）即期汇票一式二份；

（4）详细装箱单一式六份；

（5）质量合格证一式六份。

4.2.3 合同总价的＿＿％，计＿＿（大写：＿＿），在买方收到下列单据经审核无误后不迟于三十天支付给卖方：

（1）商业发票一式六份。

（2）双方代表按本合同第九章规定签署的合同工厂交接验收证书的影印本一份。

（3）即期汇票一式二份。

4.2.4 合同总的＿＿％，计＿＿（大写：＿＿）。在按本合同第十章规定“合同工厂”保证期满后，买方在收到卖方提交的下列单据经审核无误后不迟于三十天即支付给卖方：

（1）商品发票一式六份；

（2）双方代表按本合同第十章规定签署的合同工厂保证期结束的确认书影印本一份；

（3）即期汇票一式二份。

4.2.5 合同总价的＿＿％，计＿＿（大写：＿＿）。买方应自＿＿日起，于＿＿年内，每＿＿个月为一期，平均分期按下列办法支付给卖方。

4.2.5.1 卖方应开立分＿＿期支付具有下述内容的远期汇票共＿＿份，每份正副本各一份于＿＿时提交买方：

（1）票面金额为合同总的＿＿％，另加第＿＿章＿＿条规定的延期付款的利息，计（大写：＿＿）；

（2）以＿＿日期为出票日，到期日分别为自出票日满＿＿个月；

（3）以买方为付款人；

（4）带有利息条款。利息按年息＿＿％计算自出票日起算至到期日止。具体金额如下：

票期 本金 利息 本利合计

第一期

第二期

……

合计

4.2.5.2 买方收到汇票后，于＿＿时即对上述分＿＿期支付的汇票正本承兑，并交北京中国银行背书保证后送交卖方。

4.2.5.3 卖方收到汇票后应在各期汇票到期日前，分别将汇票正本提交北京中国银行，由北京中国银行提请买方于汇票到期日后一天支付给卖方。

4.3 按本合同第＿＿章和第＿＿章规定，如果卖方应支付赔款或/和罚款等有关款项时，买方在按本章第4.2.2条，4.2.3条4.2.4条规定支付货款时有权从货款中扣除。

4.4 买方支付本章第4.2.1条所规定的货款时，应向卖方提交中国银行出具的以卖方为受益人金额为合同总价＿＿％和延期付款的利息的保证函（保证函格式详见本合同附件八）。

4.5 买卖双方因履行本合同所发生的银行费用，在中国发生的，均由买方负担，在中国以外发生的，均由卖方负担。

（注：方案二各项条款适用于延期付款的情况）

第五章 交货与交货条件

5.1 卖方应于本合同生效日后＿＿个月内分＿＿批将本“合同工厂”的“设备”交付完毕。

共17页，当前第6页1234567891011121314151617

合同号：__________

订单号：__________

买方：__________

卖方：__________

买卖双方签订本合同并同意按下列条款进行交易：

(1)品名及规格

(2)数量

(3)单价

(4)金额

合计

允许溢短装_____%

(5)包装：

(6)装运口岸：

(7)目的口岸：

(8)装船标记：

(9)装运期限：收到可以转船及分批装运之信用证_____天内装出。

(10)付款条件：开给我方100%保兑的不可撤回即期付款之信用证，并须注明可在装运日期后15天内议付有效。

(11)保险：按发票110%保全险及战争险。

由客户自理。

(12)买方须于___年___月___日前开出本批交易信用证，否则，售方有权：不经通知取消本合同，或接受买方对本约未执行的全部或一部，或对因此遭受的损失提出索赔。

(13)单据：卖方应向议付银行提供已装船清洁提单、发票、中国商品检验局或工厂出具的品质证明、中国商品检验局出具的数量/重量签定书;如果本合同按cif条件，应再提供可转让的保险单或保险凭证。

(14)凡以cif条件成交的业务，保额为发票价值的110%，投保险别以本售货合同中所开列的为限，买方如要求增加保额或保险范围，应于装船前经售方同意，因此而增加的保险费由买方负责。

(15)质量、数量索赔：如交货质量不符，买方须于货物到达目的港30日内提出索赔;数量索赔须于货物到达目的港15日内提出。对由于保险公司、船公司和其它转运单位或邮政部门造成的损失卖方不承担责任。

(16)本合同内所述全部或部份商品，如因人力不可抗拒的原因，以致不能履约或延迟交货，售方概不负责。

(17)仲裁：凡因执行本合同或与本合同有关事故所发生的一切争执，应由双方通过友好方式协商解决。如果不能取得协议时，则在中国国际经济贸易仲裁委员会根据该仲裁机构的仲裁程序规则进行仲裁。仲裁决定是终局的，对双方具有同等约束力。仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。仲裁也可在双方同意的第三国进行。

(18)买方在开给售方的信用证上请填注本确认书号码。

(19)其它条款：

卖方：__________买方：__________

进口代理协议

甲方：_________

乙方：_________

甲乙双方经友好协商，就甲方委托乙方代理进口_________业务达成以下协议：

一、甲方委托乙方代理进口_________，乙方接受甲方的委托。

二、双方责任义务

（一）甲方责任

1.负责与外方商定所有合同条款，并对合同的全部内容及交货内容负责。

2.及时向乙方支付定金及货款。定金为合同总金额的25％，于双方协议签订三日内支付，其余75％货款由甲方提供工厂担保，并于信用证开出后十天内付清，担保函是本协议不可分割的一部分。

3.按时支付乙方代理手续费，比例为合同金额的3％，于协议签订三日内支付。

4.预付港口一切费用（报关、接货、滞报、滞箱费等），预计为_________元（根据实际费用结算金额，多退少补）。支付银行利息（_________个月，金额为_________）及银行费用。

5.保证该票货物进口加工后以_________公司名义再出口，详见双方出口代理协议。

（二）乙方责任

1.根据甲方提供的外销合同条款对外签约，详见_________合同（编号_________）。

〖您正浏览的文章由第一＇范文网www.diYifanwen.com整理，版权归原作者、原出处所有。〗

2.负责办理进料加工手册及其它相关手续。

3.负责代甲方办理报关、接货等手续。

4.及时将有关单据转交甲方。

5.如发生索赔等经济纠纷，乙方可在甲方委托下，代办有关涉外手续。

三、甲乙双方应各自履行职责义务，如在各自职责范围内出现问题或发生损失由各自承担责任。

四、本协议未尽事宜，双方另行协商解决。

五、本协议与甲方出具的担保函同时生效。

六、本协议一式两份，双方各执一份，自双方签字盖章之日起生效。

甲方（盖章）：_________ 乙方（盖章）：_________

代表（签字）：_________ 代表（签字）：_________

_________年____月____日 _________年____月____日

货物进口合同（2）

_________国_________市_________外贸公司（下称外贸公司）与中国_________市_________公司（下称公司）签订本合同如下：

1.合同的标的、价格和总价

外贸公司在_________中国界车上交货条件下按本合同附件1向公司提供商品。商品以美元计价，系_________中国界车上交货价，包括包皮、包装和标记的费用。

根据附件1由_________国向中国供货的总值为_________美元。

公司相应地在中国_________国界车上交货条件下按本合同附件2向外贸公司提供商品。商品以美元计价，系中_________国界车上交货价，包括包皮、包装和标记的费用。

根据附件2由中国向_________国供货的总值为_________美元。

2.供货期

售方应在本合同附件规定的期限内交货。售方有权按双方商定的数量和金额提前供货。购方有义务按合同规定接收货物。

3.结算

本合同所供货物之价款，在易货基础以上美元计价，不通过银行记帐。货物交接后，由售方商务代表到购方结算，或将结算凭证寄给购方进行结算，并凭下列单据办理：

（1）发货帐单2份；

（2）盖有发货站戳记的铁路运单副本1份

（3）明细单2份

（4）品质证明书1份

购方接到上述单据核对无误后给售方出以等值易货贸易结算凭证予以确认。

4.包装

卖方应在包装货物时采取所有预防措施以保证货物在储存、海运、陆运、吊装时完好无损。

5.商品的品质和保证

所供商品的品质应由品质证明书加以确认，该证书确认商品品质符合生产国的技术条件和国家标准。

所供商品的品质性能应与标准样品相一致，标准样品在签订合同时交给买方，在保证期内留存买方并在对供货品质发生争议的情况下供双方使用。

保证期为供货后_________个月。

6.索赔

购方可按_________所规定的期限和程度在下列方面提出索赔。

（1）货物的数量

如货物数量与明细单注明的数量不符，在包装完整和没有外部损伤（内部短缺）的情况下，购方有权凭检验证书提出索赔。

如果货物的发运系按发货人确定的重量发出，而国境交接站双方铁路交接中发现不足，并从实际情况看来，不是铁路方面的过失。可根据双方铁路方面编制的商务记录提出索赔。

（2）货物的质量

如货物品质与合同规定不符时，可根据商品检证或无利害关系的权威机关的代表参与制成的记录提出异议。

如售方所供货物的品质，不符合合同规定的技术条件或与双方确认的样品不符时，购方有权要求售方或者削价、或者更换货物。如果售方自收到异议之日起_________天内不作最后决定，或不同意检验证书中确定的削价百分之比时，则购方有权将品质不合格的货物按售方提供的地址退给售方。售方应在本合同规定的异议审理期限内将返回地址通知购方。

如果在每批货物中发现残次品占_________％以上，收货人则将退回全部货物。由于质量原因退回货物时所产生的全部费用由售方承担。

在这种情况下，售方没有免除向购方补发数量相同并符合合同规定的货物的责任。

在终点检验货物的数量和/或质量所需要的一切费用由购方承担。

7.不可抗力条款

由于发生不可抗力情况（如：火灾、水灾、地震等），而直接影响本合同的履行时，售方对本合同的部分义务或全部义务无法履行的责任不予承担。经双方协商，履行本合同义务的期限也可相应推迟。发生不可抗力情况一方应自灾情结束之日起，_________日内将有关发生不可抗力情况的性质、毁坏程度及影响合同履行的情况书面通知对方。如对方有异议，发生不可抗力情况一方凭其国家有关机关的认证书豁免责任，中方为_________，_________方为_________国工商会。

8.仲裁

由本合同所产生或与本合同有关的一切纠纷，应尽可能通过双方谈判解决。如双方不能达成协议，可通过被告国对外贸易仲裁机关审理。

9.其他条件

本合同未尽事宜，均按_________办理。

对合同的一切修改与补充意见只有以书面形式形成并经双方鉴定后才生效。经双方确认的往来信函、传真、电子邮件等，将作为本合同的组成部分，具有合同的效力。

本合同一式两份，以中、_________两种文字书就，两种文字具有同等效力。

10.双方法定地址：

售方：_________

地址：_________

电传：_________

传真：_________

电话：_________

国际电报：_________

购方：_________

地址：_________

电传：_________

传真：_________

电话：_________

国际电报：_________

10.运输地址

发货人：_________

发站：_________

收货人：_________

到站：_________

售方（盖章）：_________ 购方（盖章）：_________

法定代表人（签字）：_________ 法定代表人（签字）：_________

_________年____月____日 _________年____月____日

签订地点：_________ 签订地点：_________

委托进口合同

合同编号：_________

日期：_________

甲方：_________

地址：_________

Tel（电话）：_________

Fax（传真）：_________

乙方：_________

地址：_________

Tel（电话）：_________

Fax（传真）：_________

甲、乙双方愿意根据《中华人民共和国对外贸易法》和《中华人民共和国合同法》之规定签订本合同。乙方根据甲方的委托实施进口行为。双方同意共同遵守如下条款：

1.甲方自行与境外供货商确认进口货物的产品名称、规格型号、数量、进口单价、产地、装箱情况、要求的交货期等所有内容。

2.乙方不承担甲方委托进口产品的质量风险和市场价格风险。若由于甲方未履约或未完全履约，而造成乙方未履约或未完全履约之责任完全由甲方承担。

3.甲方应保证提供的报关货物产品名称、规格型号、数量、进口单价、产地、装箱情况等有关信息的真实准确，并符合归国家对_________（地区名称）小额商品市场管理的有关规定，否则，所引起的一切经济和法律责任概由甲方负责。

4.甲方负责将货物的具体清单、价格和数量等资料在境外卖方发货期前5个工作日将订货通知单交乙方以便乙方办理货物进口的审批手续和进口报关的有关手续，以乙方的名义代甲方签订外贸合同。在执行进口合同过程中，随时向甲方通报有关情况并会同甲方及时处置。

5.合同未尽事宜，双方应首先根据上述法律及双方在签订合同时达成的基本原则协商解决。

6.本委托合同规定的代理手续费为货值的_________，不包括办理外贸合同项下仲裁、诉讼及外商破产事宜所需的任何费用，及码头、船务、商检、仓储、运输等其他费用。

7.乙方代理甲方从_________进口（_________）一批。数量（_________）吨，价值 （_________）美元。

8.争议的处理

（1）本合同受中华人民共和国法律管辖并按其进行解释。

（2）本合同在履行过程中发生的争议，由双方当事人协商解决，也可由有关部门调解；协商或调解不成的，按下列第_________种方式解决：

a.提交_________仲裁委员会仲裁；

b.依法向人民法院起诉。

本合同签章生效，一式两份，甲乙双方各持一份。

甲方（盖章）：_________ 乙方（盖章）：_________

法定代表人（签字）：_________ 法定代表人（签字）：_________

委托代理人（签字）：_________ 委托代理人（签字）：_________

地址：_________ 地址：_________

签订地点：_________

签订时间：_________ 年____月____日