英文自我介绍简版【20篇】

I & & & & & &, is the school graduates, I study the automation, my own love of the profession, in college, I learn professional knowledge, ability has been improved.

The prepared mind. Continue to challenge, is to constantly improve the support in my university four years ahead of the inexhaustible power. His alma mater, practical and rigorous study so that I have set a hard, quick thinking, strive for knowledge learning attitude, knowledge structure, solid professional knowledge and proficient computer skills is a combination of. My great advantage. On the basis of professional learning, I study the electronic circuit design software, MCU, PLC programmable controller, MCU application development and design and good electronic circuit. I know that, as a kind of electric students need to master computer applications, has studied a variety of computer programming Language, C, assembly language and so on, can master and apply office, windows, XP, smoothly passed the computer grade examination, and achieved good results

"Ten thousand years too long, seize the day". Time waits for no one, not beyond time will be eliminated in history. Napoleon said: "dont want to be a marshal is not a good soldier. I want to say" do not want to do a career staff is not good staff, I want to "race with the wind, I believe the strength and charisma to conquer all, but I hope to the young, the most capable, most of the sense of challenge time culture, self-worth, growth is able to endure hardship, to fight the elite. Because the young, so I have the drive and confidence; because young, I also have shortcomings and deficiencies. But I would like to learn together with other colleagues in the new environment, in common Step together to create enterprise wealth

Thinking, innovation, pursuit, and giving are my unchanging tenets of life. I hope I can do better in the days to come

good morning, my name is jack. it is really a great honor to have this opportunity for an interview. i would like to answer whatever you may raise, and i hope i can make a good performance today, and eventually enroll in this prestigious university in september.

now i will introduce myself briefly. i am 21 years old. i was born in heilongjiang province, northeast of china. i am a senior student at beijing university. my major is packaging engineering. and i will receive my bachelor degree after my graduation in june. in the past 4 years, i spend most of my time on study. i have passed cet4/6 with an ease. and i have acquired basic knowledge of packaging and publishing both in theory and in practice. besides, i have attended several packaging exhibition held in beijing. this is our advantage study here. moreover, i have taken a tour to some big factory and company. through these i have a deeply understanding of domestic packaging industry.

compared to developed countries such as us, unfortunately, although we have made extraordinary progress since 1978, our packaging industry are still underdeveloped, mess, unstable, the situation of employees in this field are awkward. but i have full confidence in a bright future if only our economy can keep the growth pace still.

i guess you maybe interested in what is my plan during graduate study life. i would like to tell you that pursue law is one of my lifelong goal. i like my major packaging and i won’t give up. if i can pursue my master degree here i will combine law with my former education. i will work hard in these fields, patent, trademark, copyright, on the base of my years study in department of …

my character, i cannot describe it well, but i know i am optimistic and confident. sometimes i prefer to stay alone, reading, listening to music, but i am not lonely, i like to chat with my classmates, almost talk everything. my favorite pastime is basketball, playing cards or surfing online. through college life, i learn how to balance between study and entertainment. by the way, i was a actor of our amazing drama club. i had a few glorious memories on stage. that is my pride.

During this period to seriously comply with the rules and regulations of the new group, love plants such as love home, but also at work

Constantly strict demands on themselves, with the Ministry of the production process work, the layout of the leadership to complete the various tasks. Diligent and enterprising, innovative, and continuously improve their work efficiency and found that the work of the problems in a timely manner to report to the leadership and seek solutions to the companys development and make greater contributions.

First, study with great concentration, conscious temper.

Although I took the forklift driving license is not long, just started, the operation is not particularly skilled, but in the course of my study, and consciously temper. After 3 months, I have been able to carry out skilled operation control, posts for three months to basically no mistakes, the ability to work has been greatly improved. For the future to complete the work to lay a solid foundation. I will continue in the next work, to further improve my professional level, at the same time to do a better job.

Second, strict requirements, love and respect their jobs.

Work in strict demands on themselves, diligent, love and respect their jobs, do not bow before difficulties do not back in front of the work, high-quality completed the work. In future work, I will humbly ask experienced instructors, and constantly sum up experience, to make up for their own deficiencies. At the same time, continue to learn a variety of theoretical knowledge and professional skills for the companys contribution to the development of their own strength!

Third, strengthen training, improve operational skills.

In order to do their work well, I make full use of limited time, strengthen the operation skills training, improve the efficiency of loading and unloading operations to ensure the safety of loading and unloading operations.Like trucks, before the operation must be loaded with the number of pieces of goods, specifications for serious study to determine the code put standard, so as to ensure the volume filled with the vehicle. I remember the beginning of forklift operations, I have flip twice.Since then, I have to strengthen all aspects of skills training, and achieved good results, summed up a set of forklift driver training methods.

Good morning !

It is really my honor to have this opportunity for a interview,I hope I can make a good performance today. Im confident that I can succeed.

Now i will introduce myself briefly I am 26 years old,born in shandong province .

I graduated from Qingdao university. my major is electronic.and i got my bachelor degree after my graduation in the year of 20xx.

I spend most of my time on study,i have passed CET4/6 . and I have acquired basic knowledge of my major during my school time.

In July 20xx, I begin work for a small private company as a technical support engineer in QingDao city.Because Im capable of more responsibilities, so I decided to change my job.

And in August 20xx,I left QingDao to BeiJing and worked for a foreign enterprise as a automation software test engineer.Because I want to change my working environment, Id like to find a job which is more challenging. Morover Motorola is a global company, so I feel I can gain the most from working in this kind of company ennvironment. That is the reason why I come here to compete for this position.

research experience and academic activity

教师英文自我介绍

when a sophomore, i joined the association of ai enthusiast and began to narrow down my interest for my future research. in 1997, i participated in simulation tool development for the scheduling system in prof. wang’s lab. with the tool of opengl and matlab, i designed a simulation program for transportation scheduling system. it is now widely used by different research groups in nust. in 1998, i assumed and fulfilled a sewage analysis & dispose project for nanjing sewage treatment plant. this was my first practice to convert a laboratory idea to a commercial product.

in 1999, i joined the distinguished professor yu-geng xis research group aiming at network flow problem solving and heuristic algorithm research. soon i was engaged in the fudan gene database design. my duty was to pick up the useful information among different kinds of gene matching format. through the comparison and analysis for many heuristic algorithms, i introduced an improved evolutionary algorithm -- multi-population genetic algorithm. by dividing a whole population into several sub-populations, this improved algorithm can effectively prevent ga from local convergence and promote various evolutionary orientations. it proved more efficiently than sga in experiments, too. in the second semester, i joined the workshop-scheduling research in shanghai heavy duty tyre plant. the scheduling was designed for the rubber-making process that covered not only discrete but also continuous circumstances. to make a balance point between optimization quality and time cost, i proposed a dynamic layered scheduling method based on hybrid petri nets. the practical application showed that the average makespan was shortened by a large scale. i also publicized two papers in core journals with this idea. recently, i am doing research in the composite predict of the electrical power system assisted with the technology of data mining for bao steel. i try to combine the decision tree with receding optimization to provide a new solution for the composite predictive problem. this project is now under construction.

Although the beginning of military training, when feeling particularly suited to the training is tired and pain, soak in their sweat all day, doing everything to obey orders, not arbitrary, but I can always stick to it, even in the The most tired of the moment did not relax the requirements of their own, asked when the hand and shoulder pressure was sore, I still teeth to maintain, maintain Junzi, and actively hone their own will quality. Later, more sweat, to adapt, and do not feel tired.

Military training let me understand how to do a qualified military is not easy, the military to pay more than we can not imagine the sweat, to be a soldier, we must discipline, obey orders. I am in military uniform is half of the military, through strict military training in their own requirements, my physique and will have been honed even stronger, this kind of bitter and tired I may never meet again, but may Will encounter even more tired of the challenges. I believe that after the military training I will not fear any hardships, I will be brave to face all challenges, no matter how serious the task, I will continue to complete the task.

Military training is also a team training, hard training created a well-trained company, marching, side guns, kettle, we everywhere unified action, we are concerned about each other, mutual exchange of experience, let us squareMore neat. Thirteen companies, even though this company formed only a short period of ten days, but it has been firmly in memory in each of the hearts of thirteen, 13 is the pride of the entire battalion! We created it Honor, and we are proud of it!

Time off quickly, blink of an eye, I went to Hengyuan company project department, has more than six months.In these days, success, failure, joy, and distress. In the leadership of the care and guidance, colleagues in the full support and help, my ability to work has been greatly improved.

From the unit, I know their own shortcomings and the direction of the effort, now in the project department engaged in the measurement of construction tests and so on. In addition to the work of the Ministry of Construction, , To learn more about my colleagues work knowledge and communication. I know that their experience and experience are inadequate, practice is also very flawed, but do not know I asked, and access to information and drawings, colleagues in the office and the leadership of the help, feel that they learned these days Many, every day is full. Now the work of these days to do a self-assessment.

1, 1, to study hard and continuously improve professional competence. At work, serious study of professional knowledge, practice and theory will be combined, continue to accumulate experience, a lot of professionals, technical staff advice, and constantly enrich themselves;

2, abide by the rules and regulations, these days, their work is not afraid of hardship, not afraid of tired, learning excellent staff approach, more to see more to listen to more questions, carefully to complete the construction test of the work tasks; , Unity of colleagues, work together, colleagues, harmonious relations, unity and fraternity, mutual help, mutual respect and understanding;

4, due to their lack of work experience in the work of the lack of practical experience, quality inspection work done inadequate, through the subsequent accumulation of learning and practice, and more to my colleagues to learn, this is my future work to make good efforts direction.

Second, the attitude in the professional, everyone has a motivated heart, I not only work for the company, working for the boss, I work for themselves, I believe they can do a very hot heart, a pair of very Hard - working hands. On the one hand I should not rigidly adhere to some things, to be good at breakthroughs, creative ideas, but also to the overall situation, the team as the most important, can not be too personal. And then later in the process of doing things to pay attention to the method, so as to make work more efficient and reduce unnecessary duplication of work, things will do better. In the professional field, I have been working in the project department of the company. With the help of my colleagues, I have gained more and more knowledge through professional efforts and work experience.

3, review these days, I seriously study the professional knowledge of road and bridge, study diligently, wholeheartedly, courteous, warm, patiently answer the problems in the work, and in practice to improve their quality and professional level, and strive to grow As a qualified Hengyuan employees. These days, let me on their own jobs and the companys advantages of resources, have a more profound understanding and understanding, which can be more quickly adapt to their jobs, give full play to their initiative, in the future work andLife, I believe that through their own efforts, in the future work, I will grow into a professional and responsible staff, to become the object of learning for others to contribute to the company. With the increase in their working days, to achieve their goals, reflecting the value of their lives, and the company grow together. I will use modest attitude and full of enthusiasm to do my job, create value for the company, with the company to look forward to a better future!

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

Hello, I am Ouyang Feng, you can call me Ouyang Huoxiao front. Below I used to let everyone know me.

I graduated from Guangxi University, I love mechanical things, then a little love to do some mechanical. A big game player through the National Computer Rank Examination (two C language), the same year, the national robot contest in fourth.

This time I took my love ship to participate in robot competition, modeling is done according to Transformers, the program is my own series, I hope you can like

I hope you will support me!

good afternoon, teachers! my name is yangxiaodan. i`m 11 now. i`m from class2 grade 5 of tongpu no.2 primary school. my english teacher is miss sun. she`s quiet and kind. she`s short and young. my good friend is zhangbingbing. she`s 12. she`s tall and pretty. we`re in the same class. we both like english very much. i like painting , listening to music, playing computer games and reading books. my favourite food is chicken. it`s tasty and yummy. i often do my homework and read books on saturdays. this is me. please remember yangxiaodan. thank you very much!

Familiar with the installation and maintenance of the software Familiar with the computer hardware assembly and maintenance, familiar with windows, xp, sever operating system installation and configuration and maintenance of a good foundation of computer knowledge and network technology, network equipment, LAN and networking technology have a certain understanding There are network security, network management and network maintenance of the basics. Understand the construction of the site familiar with the site editor and management to understand the optimization of the site know how to promote the site and site security. Understand the general network security software installation and use.

Proficient in linux server, windows server server configuration and management, network security management, sql server database series of operation and management, familiar with c language, c, delphi, java language, Cisco and Ruijie network equipment configuration and maintenance. In November to participate in the national soft test and access to "network engineer" intermediate title.

Strong self-learning ability, a high degree of responsibility, a strong plasticity, love of work, love life, honest and trustworthy, and people are good, filial piety, caring for others. Not pleased, not to have compassion. In the face of setbacks, convinced: born I will be useful. As long as 1% of the hope, we must pay 100% effort. Sincerely hope that my join for your units to bring considerable benefits.

Hello，everyone!

My name is Winnie.Im a 15 years old girl. I live in the beautiful city of Rizhao.

Im an active，lovely and clever girl.In the school，my favourite subject is maths.Perhaps someone thinks its difficult to study well.But I like it.I belive that if you try your best，everything can be done well.

I also like sports very much.Such as，running，volleyball and so on

Im kind-hearted. If you need help，please come to me .

I hope we can be good friends!

OK.This is me .A sunny girl.

Sincere, introverted, focused; self-learning ability, the new knowledge and new technology to maintain a strong interest in learning, the ability to accept new things more; a strong sense of responsibility can be hard, has a strong teamwork and communication skills; more strong resistance capacity, the capacity of self-restraint and adaptability; using C, VB, SQL SERVER, PLC, WINCC done and technology tools such as the actual project, has a certain practical development experience.

真诚、内敛、专注;自学能力强，对新知识、新技术保持着强烈的学习兴趣，接受新事物的能力较强;责任心强，能吃苦耐劳，具有较强的团队合作和沟通能力;较强的抗压能力、自我约束能力以及应变能力;用C、VB、SQL SERVER、PLC、WINCC等工具与技术做过实际项目，具有一定实际开发经验。

Actively participate in school activities, concerns students, but also doing a class, do a good job, like working with people, be good to remember and use facts to deal with the details of the issue, the angle of approach to reality. Resolute and steady, reliable work, there is a strong sense of responsibility, understanding, sensible, loyal to their own organization where, with action to defend the collective values and principles. Ambitious and ambition, good at influencing others.Interested in learning the professional knowledge of the hope that through more social practice, and strive to improve their professional skills.

Good morning !

It is really my honor to have this opportunity for an interview, I hope I can make a good performance today. Im confident that I can succeed.

Now I will introduce myself briefly.I am 26 years old,born in shandong province . (General Introduction)

I was graduated from Qingdao university. my major is electronic.and I got my bachelor degree after my graduation in the year of 20xx. During university, I spent most of my time on study so that I have passed CET4/6 . and acquired basic knowledge of my major.(Education background)

In July 20xx, I began work for a small private company as a technical support engineer in QingDao.Because Im capable of more responsibilities, so I decided to change my job. And in August 20xx,I left QingDao to BeiJing and worked for a foreign enterprise as an automation software test engineer.Because I want to change my working environment, Id like to find a job which is more challenging. Moreover Motorola is a global company, so I feel I can gain the most from working in this kind of company ennvironment. That is the reason why I come here to compete for this position. (Research experience and academic activity)

I think Im a good team player and Im a person of great honesty to others. Also I am able to work under great pressure.

That’s all. Thank you for giving me the chance.

Senior student, first of all, I would like to thank the students Union of the school for providing me with this valuable opportunity so that I can sit here and communicate with you. My name is Huang Yi, a student with mechanical control

As a result of the students support and their own efforts in the beginning, I was lucky enough to elect the class organization civic members. On Saturday, our class organized, planned and presided over by a class as a unit, in order to increase the collective cohesion small evening entertainment for the purpose of the party. Although reached the anticipated goal but let me see many disadvantages of their own.

High school students heard that the university is the cradle of talents, here in their lack of students, found that the exchange of students, and correct them, so that they can better serve students. For the class, I think students will for me is a chance to exercise their own is also a display of their own talent the stage.

Through online information and their own understanding, I think the main task is to carry out the art department students of campus cultural activities, to enrich students extracurricular life for oneself, can make the university campus become more bright and colorful organization.

If I am lucky enough to receive your approval, I will try my best to do the task assigned by my superior, and live up to the expectations of my seniors, and as a new starting point, I will make my own contribution to the Ministry of literature and art

If I fail to join, I will seriously sum up, continue to work, the interview as a exercise, as long as the effort, I will never regret

How are you, I call __.This year is 22 years old.Graduate from __college.Theprofession is a calculator multimedia.I am one is bright, optimism,there is the person of responsibility.A fondness for plays basketball, computer,listen to music, etc..Thankful your company gives me this the opportunity of thepersonal interview!

Hi,everybody. Good to be here. Facing the audience, a thought occured to me. Mama has alway told me not to make a fool in public. But somehow I just couldnt follow what she said exactly. Well some people always treat me as a crazy loon. For Im never part of any crowd and have some dreams far-off look. Id even crash into someone with my nose stuck in a book. Now Im standing on the stage, giving a speech in English. Circumstance being that Im pretty nervous. Maybe some guy would just think that itd embarass me as frightened speechless. Never mind. Im always good for a laugh.

Three years to hone university, so they have married into a unity innovation and encourage each other to explore the collective sense of team spirit and King Kong music industry, along with a strong ability to solve problems independently. I have always been to improve their overall quality as the goal, efforts to develop a comprehensive self-direction, to establish a correct outlook on life, values and world view.Respect for teachers disciplined, concerned about the collective, good moral character, learning the right attitude.

To meet the needs of social development, I seriously learn the knowledge, play to their strengths; tap their own potential, combined with social practice opportunities for the summer every year, thus gradually improve their learning skills and analytical problem solving skills as well as some coordination organization and management capabilities. aspects of thinking and behavior, I am fine style, others with sincerity, can better handle interpersonal relationships, doing things calm and steady, reasonable overall arrangement can live in the transaction.

Towards learning, I am a serious effort to treat the work I can do the same dedication, careful responsible, meticulous. years as a project cost of professional college graduates, I have young and knowledge. Young may mean lack of experience, but also means that the young enthusiasm and vigor, confident I can rely on their own ability and knowledge to overcome the difficulties in work and life after graduation, and the self-realization of the value of life and the pursuit of the goal.

Has a strong user research, market analysis, the Chinese users of social form, way of life has a wealth of understanding and unique views on the color, material feel delicate and sensitive, with color, material, surface treatment research and trend analysis Ability to understand the color of contemporary China has a deep understanding and their own point of view; be able to accurately grasp the social culture, fashion trends, the Chinese modern society and traditional cultural backgrounds have a careful study and profound understanding of the design work is full of enthusiasm, Strong design capability, design a wide range of products.

Familiar with all kinds of office software and PS, CORELDRAW, CAD, 3dmax, and so on. We have a lot of experience in the design field, such as design, pottery, painting, cartoon, etc. , Maya and other professional painting tools, a strong learning and hands-on ability; a strong plane three-dimensional thinking, a strong three-dimensional sense of consciousness, color-sensitive to strong control; design style changeable, innovative, creative Innovation ability; and have good oral communication skills, can adapt to foreign travel.

I have engaged in financial accounting work for many years, experienced, competent high financial and accounting jobs. And I have been without interruption improving professional skills, he has passed the assistant accountant, intermediate accountant. I am familiar with the national taxation regulations, policies, proficiency in office software, financial software (including the "gold plate K3", "the UF T6", "Digital China Yi Fei" Golden Abacus ", etc.), proficiency in electronic VAT declaration, foreign-invested enterprises income tax returns, export tax rebates and other financial and tax reporting software.