0篇1：珠算技术培训协议_合同范本
甲方：*（身份证号：*）
乙方：*（身份证号： ）
甲方*从事珠心算的研究与市场拓展工作，经多年打拼，开拓了*区市场，与各合作伙伴确立了良好的合作关系，树立了良好的形象，信誉极佳，并取得了一定的经济和社会效益。乙方*跟随甲方在*区从事教学工作。因甲方精力所限，甲方将在*区开拓的市场有偿交由乙方承包经营，经双方协商，本着平等自愿、互惠互利的原则，签定本合同。
一、承包合同期限
本合同自xx年元月签定之日起至xx年元月31日止，暂定三年。到期没有特别书
面合同补充，本合同顺延。
二、承包内容及教材指定
1、乙方以且必须以甲方所创立的天才小博士珠心算的名义积极从事*地区珠心算的市场开拓及聘请相关教师从事珠心算的教学培训工作，不得自行设立品牌，不得为其他任何品牌珠心算开拓市场或变相开拓市场。
2、甲方负责指定教材或有偿提供本人编印的天才小博士珠心算教材。乙方不得自行选择使用其他任何教材。
3、甲方每年组织一次珠心算大奖赛，乙方应积极组织人员参加。
三、工作纪律
1、乙方应严格遵守国家的法律法规，不得从事欺诈等违法活动。如果出现收学员费用
而没有如期给学员上完规定课时，或收款后没有给学员上课，乙方必须独自承担由此带来的法律责任。甲方有责任配合国家有关部门追究乙方责任，以挽回学员损失。
四、承包方式及费用约定
1、 甲方将在*开拓的所有业务单位交由乙方全权负责经营。
2、 乙方每年向甲方一次性足额缴纳一万元承包费用。第一年费用在合同签定时缴
纳，以后每年的承包费用在上一年的12月25日前缴纳。
3、 甲方在各业务单位的教具等由乙方免费使用，所有权为甲方所有，乙方必须妥善保
管使用。
4、 甲方以每套15元的价格向乙方提供教材及手提袋。小算盘及练习题乙方自行购置、
印刷。
5、 xx年1月15日前甲方在所有业务单位（幼儿园）的应收款项仍由甲方收回，所
遗留未完成教学计划的幼儿园乙方负责无偿完成教学计划。xx年1月15日后发生的费用由乙方负责收款。
6、乙方每学期对学员收费不得低于200元。
五、合同变更、解除和终止
1、合同经甲乙双方协商一致，合同可以解除。
2、乙方有下列情形之一的，甲方可以随时解除合同，并应当书面告知乙方理由：
（一）乙方擅自改变教学内容，或者存在欺诈学员行为的；
（二）乙方消极工作，造成合作伙伴退出合作，市场突然缩水，合作单位不足5个；
(三) 乙方管理出现问题，致使教师流失，不足已完成教学工作；
（四）乙方严重违反工作纪律或教师职业道德，造成恶劣影响的；
（五）乙方擅自把合作伙伴转让给其他品牌珠心算，或者为其他品牌珠心算开拓市场的；
（六）乙方被判处拘役、有期徒刑以上刑罚收监执行（含缓刑人员）或者被劳动教养的；
（七）乙方因其他原因不能按时履行工作的；
（八）乙方未在规定时间缴纳承包费用的；
（九）法律、法规规定的其他情形。
3、乙方有下列情形之一的，甲方可以解除合同。
（一）乙方患病或负伤，不能从事该项工作的；
（二）合同定立时所依据的客观情况发生重大变化，致使原合同无法履行，经双方协商不能就变更合同达成一致的；
4、有下列情形之一的，合同中止履行：
（一）乙方履行国家规定的法定义务的；
（二）发生不可抗力的；
（三）法律、法规规定或者合同约定其他中止情形的。
5、有下列情形之一的，合同终止：
（一）合同期满不再续约的；
（二）双方约定的合同终止条件出现的；
（三）乙方失踪、死亡或者被人民法院宣告失踪、死亡的；
（四）出现其它法定终止条件的。
六、违反合同的责任
1、任何一方违反合同的约定给对方造成经济损失的，应当承担相应的赔偿责任。
2、甲方不得再在*区授权第二家珠心算代理单位，否则支付违约金50000元。
3、乙方拒绝缴纳承包费用，又在*区以天才小博士珠心算的名义或者以其他品牌珠心算的名义在甲方原合作单位继续从事珠心算教育培训的，必须支付甲方经济损失50000元。
4、乙方存在收学员费用后不上课等恶意或欺诈等行为造成恶劣影响，致使*市场丢失，甲方无法继续在*进行珠心算市场开拓的，乙方必须支付甲方经济损失xx0元。
5、承包第一学期，乙方如不履行第四项承包方式及费用约定之第五条“xx年
1月15日前甲方在所有业务单位（幼儿园）的应收款项仍由甲方收回，所遗留未完成教学计划的幼儿园乙方负责无偿完成教学计划。xx年1月15日后发生的费用由乙方负责收款。”之规定，赔偿甲方损失10000元。
八、合同的争议处理
双方因履行合同发生争议的，可以选择以下方式解决：1、自行协商解决；2、申请调解；3、申请仲裁。4、依法向人民法院提出诉讼。
共2页，当前第1页12
篇2：七年级信息技术教学计划_教学工作计划_网
七年级信息技术教学计划
宴平中学 曹洪伟
学生情况分析
学生家庭基本没有计算机,接触计算机的时间只有在学校的一星期45分钟,操作时间客观上较少,计算机基础知识,基本技能不平衡。大部分学生学习兴趣较浓,上课能积极探索,主动求知。
现有差生情况如下:
各班都有部分学生因缺少操作机会,导致一些计算机基本操作都不熟练。
针对各年级的不同情况,必须采取不同的教学方法,特别在培优辅差上要多动脑子,充分挖掘学生的潜力,平时的教学中,应着重在实、广、新上下功夫,充分调动学生的学习积极性。
教材解析
七年级信息技术教材改版了,编者们根据《中小学信息技术课程指导纲要》,并在内容编排上注重中小学教学内容与高中教学内容的衔接。每一单元知识都是以任务为核心,以活动为主线,通过多元化主题活动等方式培养学生信息素养,让学生在主题活动中自主、写作、探究学习,强化应用与实践的能力。
教材在以往的教学内容上有很大的跨度和突破。在注重信息技术基础理论的夯实之外,又注重了信息内容的应用性和时代性。例如教
材“第三章树立社会主义荣辱观”,即以学科技术为中心,又坚固社会时代气息,树立当代学生人生坐标。
教师依据教材的内容,有更多灵活设计主题的空间,拓展教材,超越学科教材的领域会更大,可以把各个学科的内容巧妙融合在信息技术主题教学当中,完成学科间的知识的跨越,实现学科整合。
目的要求
提升学生信息技术素养,关照全体,强调问题的解决,加强协作交流和探究学习,注重学习过程的评价。
教学措施
以网络环境为学习平台,让学生自主探究学习。注重实践,灵活设计主题。
快乐学习、激发情趣是学生学习创造之源。
课时安排 (16课时)
第一单元 走进信息世界(3课时)
第一课 无处不在的信息
第二课 蓬勃发展的信息技术
第三课 信息安全
第二单元 神奇的计算机(8课时)
第四课 计算机系统
第五课 走进windows世界
第六课 留下美好的图片
第七课 在计算机上写字
第八课 让音乐随时随地伴你你左右
第九课 制作我的配乐诗朗诵
第十课 综合上机
第十一课 阶段检测
第三单元 树立社会主义荣辱观(3课时)
第十二课 “八荣八耻”正气歌
第十三课 我的社会主义荣辱观
第十四课 让我的作品跃然纸上
第十五课 中学生传统道德礼仪调查
综合实践 创建电子报刊(1课时)
篇3：电脑软件技术开发合同
甲方(委托人)：XX公司
乙方(受托人)：XX公司
协议签订地址：
经充分沟通和友好协商，甲方委托乙方开发XX公司综合办公系统(以下简称综合办公系统)，并由乙方为甲方提供该系统的实施和使用中的相关技术支持服务。为了规范双方在此项目上的权利和义务，在《中华人民共和国合同法》的原则指导下，订立本协议，由双方共同遵守。
第一条 开发和技术支持服务的内容和范围
1. 乙方负责综合办公系统应用软件的设计和开发，综合办公系统用于甲方行政办公，包括个人事务、公文流转、审批流程、资产管理、人事管理、行政辅助、系统维护等七个功能模块，具体要求详见附件《XX公司综合办公系统软件需求说明书》。
2. 《XX公司综合办公系统软件需求说明书》将作为系统开发和验收的依据，定义了系统开发的要求(包括软件功能和性能方面的要求)。
3. 如在开发或技术支持服务过程中，甲方提出《XX公司综合办公系统软件需求说明书》中未作规定的新需求或修改原有需求定义，乙方应客观地评估该变化，告知甲方该变化所引起的技术可行性及工作量(并告知评估方式和依据)。对于技术上可行且甲方要求实现的变化，其费用及时间由双方另行协商。对于后续开发费用的计算标准，乙方承诺不高于目前市场平均标准每人月2万元。在本协议之外的需求变更不影响本协议的执行。
4.在开发完成后，乙方负责综合办公系统的应用软件安装、调试和培训。安装、调试系统所需的网络、设备和系统软件环境由甲方负责提供，培训对象由甲方根据乙方上线功能要求的角色来选定，培训内容为综合办公系统的操作与管理技能，培训方式为在甲方指定地点集中培训，具体培训场地、人员和时间由双方协商。
5.乙方在免费服务期内提供5×8小时(国家法定假日除外)的技术支持服务，服务内容包括：乙方负责开发的XX公司投综合办公系统的技术咨询、软件系统恢复、软件系统功能故障处理。
6.XX公司系统所使用的甲方自购设备，其维护不包含在乙方提供的免费技术支持中，如：服务器硬件维护、服务器操作系统维护、用户计算机终端维护、数据库备份和恢复。
7.乙方负责将甲方按乙方标准备份的数据恢复。乙方在培训阶段对甲方系统管理员进行数据备份操作培训，并提供操作说明。
8. 在本系统正式上线后，如甲方要求，乙方可制作一套英文版提供给甲方使用。该版本与中文版本共享数据，可供国外用户与国内用户协同办公。具体开发要求、使用范围、用户培训方式、翻译方式、工期和费用在实施前协商，协商后另行签订协议。
第二条 开发和技术支持服务的方式
1.乙方指定开发人员到甲方现场进行需求调研，并在乙方自己的办公地点和开发环境进行开发。收文、行政发文、党委收文、党委发文、部门简函、所属单位报文六个模块的开发在甲方现场进行。软件开发完成后，其安装、调试工作在甲方提供的服务器上完成。
2.用户培训的场地等用户所需由甲方提供,范围根据乙方提出的培训内容经双方进行确定。
3.在乙方提供免费技术支持服务期内，乙方将通过以下三种服务方式进行技术支持：
1)电话支持
客户通过拨打乙方指定的维护工程师电话，由乙方工程师进行电话支持。
2)远程技术支持
在甲方保证服务器网络联通的情况下，通过远程诊断、电话支持、电子邮件等方式进行技术支持。
3)现场支持
如果不能通过远程技术支持方式解决系统的技术故障，在用户提出现场支持要求后的24小时内，我们将派遣工程师赶赴现场分析故障原因，制定故障排除方案，提供故障排除服务。
第三条 开发和技术支持服务的期限
1.本项目共120个工作日分两期完成。一期最终期限为27个工作日。二期为93个工作日。时间从合同签订第二个工作日开始计算。详细计划见《XX公司综合办公系统实施进度计划》。
2.其中一期开发完成时间为合同签订后15个工作日以内，期间每开发完成的功能模块即开始用户试用。
3.从通过验收之后的一年内，乙方均向甲方提供免费技术支持服务。
4.如有客观原因需要改变实施计划，应在双方协商后由双方项目负责人签字认可。
5.如在项目实施过程中，用户的实际需求与需求说明书中相比发生变化，或由用户负责准备的人员召集、设备采购、场地安排、网络调试、意见反馈等配合事项引起延误，则实施期限相应顺延。
6.该软件须达到需求文档要求，且在调试完善、应用正常，双方确认后才能进行系统验收和文档移交工作。
7.如甲方委托第三方从事与本项目有关或相关的事宜，甲方应确保第三方的工作进度不影响本委托项目按时完成。
8.乙方在协议期内为甲方系统提供下列服务：
1)软件重新部署。
2)数据恢复:按乙方备份标准备份的数据。
9.甲方应按本协议规定方式及时间向乙方支付报酬。
第四条 双方协作事项
1.项目实施的进度与质量需要双方密切配合。为保证项目的成功实施，甲乙双方在项目实施期间应指派并授权专人担任项目负责人和项目成员。双方项目成员及其工作职责见合同附件《XX公司综合办公系统开发项目组成员名单》。
2.甲方负责协调甲方相关部门人员配合乙方进行需求调研，提供编制需求说明文档所需的流程、表单等资料。当乙方整理并提交需求说明文档后，甲方对该文档如有异议，应及时提出修改意见并书面确认;经甲乙双方项目负责人签字确认的需求说明文档，将作为本合同附件，并作为系统开发、实施以及验收的依据。
3.乙方需指派具有丰富项目技术经验的专人担任项目实施负责人对项目实施负责。项目期间组织足够数量和技术水平的开发、测试和实施工程师，进行综合办公系统的设计和开发，保障项目的工期。
4. 为保障项目过程中的交流，甲乙双方应在项目期间以周例会或电话、邮件等方式，通报项目进展、出现的问题及应对措施等项目信息。
第五条 知识产权
1.乙方按本合同要求所开发的综合办公系统，其著作权由乙方享有。甲方及其下级分支机构、参控股公司等与甲方有直接或间接产权关系的单位可以使用和复制此软件，拥有该软件的使用权和复制权，但不享有该软件的署名权、修改权、翻译权、发表权、信息网络传播权、发行权、出租权、许可权、转让权及其它从第三方机构或个人获取经济利益的权利，甲方及其下级分支机构、参控股公司等与甲方有直接或间接产权关系的单位应确保乙方所提供的技术成果不被用于其他单位;乙方享有该软件的署名权、发表权、发行权、出租权、许可权、转让权、使用权、修改权、信息网络传播权、翻译权和复制权及其它从第三方机构或个人获取经济利益的权利，乙方可将此次开发的部分或全部技术成果用于其它用途，但不可提及甲方或甲方提供的流程及数据。
2.乙方只能将甲方提供的数据及流程，用于此综合办公系统的设计、开发、测试和使用，不得用于其它任何用途。
3.乙方在开发软件的过程中，不得有侵犯他人知识产权的行为，否则，应对外承担全部侵权责任。
第六条 项目验收
1. 在乙方完成相关阶段工作并向甲方提出书面的验收申请并经甲方确认，甲方应在7个工作日内组织项目验收。如甲方在乙方正式提交书面的验收申请之后7个工作日内不进行验收，又没有提出其它充分理由，则视为甲、乙双方均同意验收。
2.乙方在验收时应向甲方提交综合办公系统的可运行软件及相关技术文档(需包括需求说明书、二次开发接口说明、用户操作手册、系统管理手册等)的电子版本。
3. 验收时由甲、乙双方(或增加甲方指定的第三方)人员共同组成验收小组，对应用软件系统进行测试。验收依据为《XX公司综合办公系统软件需求说明书》。系统达到《XX公司综合办公系统软件需求说明书》中的功能和性能要求，则验收小组签署两份(如有第三方，则签署三份)《综合办公系统验收报告》，甲、乙方及最终用户各保存一份，即通过验收。
第七条 费用及支付方式
1.由于乙方在合作开发中承担主要开发工作，因此由甲方向乙方支付开发及培训服务费用共计人民币.00元(大写：人民币x元整)。
2.费用支付方式及时间：
1) 合同签订之日后5个工作日内支付合同总额的30%，即：￥.00元， 大写人民币x元整。
2) 一期实施完成上线后10个工作日内，支付合同总额的30%，即：￥.00元，大写人民币x元整。
3) 二期实施完成验收后10个工作日内，支付合同总额的30%，即：￥.00元，大写人民币x元整。
4)余下的金额本项目在乙方免费服务期满后的10个工作日支付。即：￥x元，大写人民币x元整。
3.在验收通过之后一年内，由乙方向甲方提供免费的技术支持服务;在一年之后，如果甲方需要乙方继续提供技术支持服务，则双方另行协商服务费用，在服务内容和方式不变的情况下，乙方承诺每年服务费用不超过本协议总金额的10%。
第八条 保密约定
1.任何一方未经另一方同意，禁止泄露本协议所涉及的相关商业和技术秘密。如违反本条，应按实际损失赔偿。
2. 本协议保密条款之时效将不受本协议有效期的影响，本协议有效期满后5年内该保密条款仍将有效。
第九条 协议的期限
本协议自双方代表签字、盖章之日起生效。
本协议有效期为自签订之日起到通过验收后一年。协议到期后，经甲乙双方协商可续签本协议。如甲乙双方在协议到期后15个工作日内未提出异议，则本协议服务条款自动延续一年。
本协议在发生以下情况之一时终止：
1.甲乙双方均同意终止本协议。
2本协议违反法律被撤销。
3本协议内容因不可抗拒的客观因素，根本不能完成。
第十条 协议变更
1.经甲乙双方协商同意，本协议可以作相应变更;
2.任何一方未经另一方同意，擅自变更本协议条款或者将本协议权利义务转让他人，均为无效。
第十一条 免责条款
因为不可抗拒因素而导致甲乙双方或任何一方不能履行或不能完全履行本协议时，甲乙双方互不承担违约责任。但遇有不可抗拒因素的一方或双方应于不可抗拒因素发生15日内将情况书面告知对方，并且提供有关部门的证明。在不可抗拒因素影响消除后的合理时间内，一方或双方应当继续履行合同。
第十二条 纠纷的解决
合作各方之间如发生纠纷，应共同协商，本着有利于事业发展的原则予以解决。如协商不成，可以诉诸签约地法院。
第十三条 附则
未经过双方书面确认，任何一方不得变更或修改本协议。
1. 由于政策、机构变动，甲方上级部门统一部署造成甲方无法继续履行协议的，由双方签订书面协议终止该合同。
2.本协议未尽事宜，双方可以签订补充协议或以附件的形式对本协议中的有关问题做出补充、说明、解释，本协议的补充协议和附件为其不可分割的一部分，以本协议具有同等法律效力。
3. 本协议一式陆份，双方各持叁份。具有同样的法律效力。
第十四条 协议附件
以下附件属本协议的有效组成部分：
1) 《XX公司综合办公系统软件需求说明书》
2) 《XX公司综合办公系统实施进度计划》
3) 《XX公司综合办公系统开发项目组成员名单》
4) 《XX公司综合办公系统服务器建议配置》
甲方(盖章)： 乙方(盖章)：
法定代表人或授权代表(签字)： 法定代表人或授权代表(签字)：
经办人： 经办人：
合同签订地： 合同签订地：
日期： 日期：
篇4：技术传授合同协议书
申请人：_________________姓名_______________年龄_______________性别__________住址________________
委托代理人：_________________姓名_______________住址________________.
被申请人：_________________名称________________住址________________
行政复议请求：________________
事实和理由：_____________
此致
___________人民法院
具状人： ___________
____ 年 _____ 月 _____ 日
篇5：最新有关农村的技术工作计划范文_技术工作计划_网
一、指导思想
认真贯彻落实党中央提出的建设社会主义新农村的目标，以提高广大农民的思想素质为重点，用科学理论武装农民群众，加强实践锻炼，提高创新能力，培养一支有文化、懂技术、会经营的新型农民农民队伍。以广大农民的综合素质为主题，以促进农业增效、农民增收为目标，坚持实际、实用、实效的原则，开展科学实用技术，就业引导，市场营销，政策法规为主要内容，提高广大群众的整体素质，扎实推进社会主义新农村建设的步伐。
二、培训目标：
通过培训，使农村农民群众了解党和国家发展农村经济的方针政策和法律法规;掌握基本的市场经济，经营管理及科学文化知识;掌握1至2项实用技术，并能因地制宜地宣传推广，使农民成为有觉悟、懂技术、善经营、会管理的新型劳动者。
具体任务如下：计划开扫盲班1个，扫盲学员2人(河东村2人)，计划参加测试人数2人、计划合格人数2人：计划科技培训545人次(东门155、下河160、河东230)，其中种植业250人次(东门70、下河80、河东100)、养殖业215人次(东门60、下河55、河东100)、人口教育80人次(东门25、下河25、河东30)。
三、培训对象及任务：
党员干部、农民群众、致富能手。
四、培训时间及地点：
xx年6月起至10月止;
青溪小学东门下河河东村农民文化技术学校。
五、培训教师：田军(组长)、钟德金、田锦全、钟桂兰及镇农牧、计生干部。
六、教学方式：
1.扫盲：采取带教上门的形式。
2.科技知识、适用技术的培训主要采取集中播放录像与讲授结合的方式进行。
七、教学组织形式：
1.培训教师利用农闲或晚上时间上门进行一对一的方式进行教学。
2.组织讲授技术及注意事项和看光碟，然后组织讨论。应采取典型引路学、个别引导学、项目带动学等形式进行，不断提高教学的实践性。
八、资料档案整理：
在培训过程中，作好记录，注意做好资料档案的归类整理及保证资料的真实性、准确性和完整性。培训结束后，写好培训总结，要求学员要学以致用，不断总结经验。
篇6：技术合同：玉米技术合作协议_合同范本
甲方：_________植物检疫站
法定代表人：_________
住址：_________
邮编：_________
联系电话：_________
乙方：_________
法定代表人：_________
住址：_________
邮编：_________
联系电话：_________
鉴于：
1._________植物检疫站拥有官方性的技术实体_________市玉米快繁中心，_________植物检疫站希望加强和国际玉米中心方面的合作研究并得到有关的科技援助。
2.国际玉米中心将提供先进的玉米遗传材料、技术、培训和派出知名专家咨询支持_________植物检疫站。
故此，双方经协商一致，达成玉米技术合作协议，协议如下：
第一条 本协议主要目的是培育筛选玉米晚疫病水平抗性品种而进行的国际合作项目。项目直接在_________主任和_________植物遗传学家的监管下开展工作。
第二条 本项目的总负责人应来自于_________植物检疫站，主要负责项目所需的人员、资金等保障项目的开展。本项目组成员包括_________植物检疫站的_________。
第三条 国际玉米中心_________负责在_________年_________月以前直接提供先进的玉米克隆中间材料和品种。这些材料主要由对玉米晚疫病具有水平抗性和农艺性状好的品系组成。_________也将帮助_________植物检疫站寻找有关项目(撰写建议书)争取政府资金支持本项目。
第四条 _________植物检疫站负责联合研究优质的玉米克隆材料的所需经费，并提供项目研究进展报告和年度总结报告给国际玉米中心。双方主要的活动应通报给国际玉米中心的中国办事处。
第五条 基于这项共有的协议，国际玉米中心和_________植物检疫站可以独立或共同发布这个协作项目的有关信息或活动结果。所有的出版或发布的结果双方均相应得到承认。双方将平等分享共同研究本行业所出现的任何知识产权并遵循国际玉米中心同中华人民共和国签署的知识产权的补充协议。任何从此项工作中产生的知识财产将为双方所有。
第六条 除了双方更新本协议，本协议在_________年期间有效，并从签字之日生效。
第七条 本协议服从于国际法。
甲方(盖章)：_________ 乙方(盖章)：_________
法定代表人(签字)：_________ 法定代表人(签字)：_________
_________年____月____日 _________年____月____日
签订地点：_________ 签订地点：_________
篇7：技术合同：农业技术推广项目合同_合同范本
合同(contract)，又称为契约、协议，是平等的当事人之间设立、变更、终止民事权利义务关系的协议。下面请看“技术合同：农业技术推广项目合同”一文：
技术合同：农业技术推广项目合同
项目名称：_________
合同编号：_________
委托单位：(甲方)_________
承担单位：(乙方)_________
签订时间：_________年_________月_________日
起止时间：_________年_________月至_________年_________月
依据《中华人民共和国合同法》，经合同双方协商，就"农业技术推广"项目签订本合同。
一、立项背景及理由
┌──────────────────────────┐
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└──────────────────────────┘
二、主要内容及主要技术指标
┌──────────────────────────┐
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
└──────────────────────────┘
三、项目实施地点、进度和规模
┌──────────────────────────┐
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
共4页，当前第1页1234
篇8：技术转让合同书「最新」_合同范本
受让方：_________(甲方)
转让方：_________(乙方)
依据《中华人民共和国合同法》的规定，经协商一致，签订本合同。(该项目属_________计划)。
一、技术秘密的内容、要求和工业化开发程度：
二、技术情报和资料及其提交期限、地点和方式：
乙方自合同生效之日起_________天内，在_________(地点)，以_________方式，向甲方提供下列技术资料：_________。
三、本项目技术秘密的范围和保密期限：
四、使用非专利技术的范围：
甲方：_________。
乙方：_________。
五、验收标准和方法：
甲方使用该项技术，试生产_________后，达到了本合同第一条所列技术指标，按_________标准，采用_________方式验收，由甲方出具技术项目验收证明。
六、经费及其支付方式：
(一)成交总额：_________元。
(二)支付方式(采用以下第_________种方式)：
1.一次总付：_________元，时间：_________年_________月_________日;
2.分期支付：_________元，时间：_________年_________月_________日;
3.按利润_________%提成，期限：_________;
4.按销售额_________%提成，期限：_________;
5.其它方式：_________。
七、违约金或者损失赔偿额的计算方法：
违反本合同约定，违约方应当按《中华人民共和国合同法》规定承担违约责任。
(一)违反本合同第_________条约定，_________方应当承担违约责任，承担方式和违约金额如下：_________。
(二)违反本合同第_________条约定，_________方应当承担违约责任，承担方式和违约金额如下：_________。
八、技术指导的内容(含地点、方式及费用)：_________。
九、后续改进的提供与分享：
本合同所称的后续改进，是指在本合同有效期内，任何一方或者双方对合同标的的技术成果所作的革新和改进。双方约定，本合同标的的技术成果后续改进由_________方完成，后续改进成果属于_________方。
十、解决合同纠纷的方式：
执行本合同发生争议，由当事人双方协商解决。协商不成，双方同意由_________仲裁委员会仲裁(当事人双方不在本合同中约定仲裁机构，事后又没有达成书面仲裁协议的，可由人民法院起诉)。
十一、名词和术语的解释：
十二、其它(含中介方的权利、义务、服务费及其支付方式、定金、财产抵押、担保等上述条款未尽事宜)：
受让方(甲方)(盖章)：_________ 转让方(乙方)(盖章)：_________
通讯地址：_________ 通讯地址：_________
联系人(签字)：_________ 联系人(签字)：_________
电话：_________ 电话：_________
开户银行：_________ 开户银行：_________
帐号：_________ 帐号：_________
邮政编码：_________ 邮政编码：_________
法定代表人(签字)：_________ 法定代表人(签字)：_________
委托代理人(签字)：_________ 委托代理人(签字)：_________
_________年____月____日 _________年____月____日
签订地点：_________ 签订地点：_________
篇9：转让技术秘密和补偿贸易合作生产协议_合同范本
第一条 合同范围
_________公司（以下简称甲方）和_________公司（以下简称乙方），经过友好协商，同意合资经营中速船用主机厂。兹同合资经营条件尚未成熟，双方将以补偿贸易进行合作生产并以此作为双方合作的第一步，其条件如下：
1.1 乙方将向甲方转让生产下列型号中速船用主机（以下简称合同产品）的技术秘密及全部技术资料，其型号如下：
12v——400zc中速船用主机；
12v——600zc中速船用主机。
1.2 “技术文件资料”的定义范围及交付：
本合同1.1款所指的技术资料（以下简称资料）定义是乙方提供合同产品的技术资料由三大部分组成：即乙方现用的一般技术资料，产品设计图纸和生产技术资料，上述资料方包括详细的技术秘密。
（1）一般技术资料包括：
a.12v—600zc中速船用主机的技术规范（包括部装、总装、试车、交货试验等）；
b.12v—400zc中速船用主机的主要零部件的技术规范；
c.合同产品中所使用的配套产品的外型尺寸、安装尺寸和性能参数的样本，
（2）产品设计图纸：
乙方提供合同产品的产品设计图纸应包括：
a.合同产品的全套施工图纸（包括总装图、部件图、系统图、原理图及全部零件的详细图纸）；
b.合同产品的计算资料和计算书；
c.有关船级社发给的证书及交船级社验证的图纸、计算书及其他资料清单；
d.试验书设计图纸及其技术文件。
（3）生产技术资料：乙方提供的合同产品的生产技术资料应包括合同产品全部工艺性指导文件及主要零件的详细制造技术资料；对原材料和合同产品零部件在生产过程中和生产后的质量检验要求，验收手段，验收步骤及验收技术文件。
（4）资料的修改：若乙方采用新技术改进产品、改进工艺过程，降低等需要对提供的资料进行修改时，应将修改的结果以书面形式提供给甲方。
（5）资料的提供方式：
a.对一般技术文件应提供三份蓝图或同等数量的清晰的复制图；
b.对产品设计图纸应提供一份生产底图及两份蓝图；
c.对生产技术资料应提供两份蓝图；
d.对已提供过的完全相同的重复资料，可免于提供，但需在清单中予以注明。
（6）资料的交付进度：
a.根据资料定义的规定，为生产12v—400zc型中速船用主机需要，乙方在签订合同后30天内需向甲方交付合同产品的全部技术资料和全部图纸；
b.根据资料定义的规定，为生产12v—600zc型中速船用主机的需要，乙方在鉴订合同后于_________年_________月_________日前，需向甲方交付合同产品的全部技术资料和图纸。
1.3 甲方将生产的产品向乙方返销如下：
12v—400zc型中速船用主机，每年_________台；
12v—600zc型中速船用主机，每年_________台。
1.4 以补偿贸易进行合作生产期限为2年，2年后若合资经营条件不成熟，则可延长合作生产期限，但最长不得超过5年。
第二条 转让技术秘密和技术文件
2.1 乙方向甲方提供合同产品的设计计算、产品图纸、制造工艺、质量控制和试验安装、调试、运转及维修等有关合同产品的全部技术资料，必须和乙方目前使用的资料内容相同。
2.2 合同产品资料的审核和验证：
乙方对提供给甲方的产品设计图纸、制造技术资料的完整性、正确性、清晰性负责。看产品设计图纸和生产技术资料中的任何部分发现有失误，当乙方接到甲方通知时立即补齐遗失部分或更改错误部分。
2.3 在合作生产期间，乙方将以最优惠价格向甲方提供甲方方面市场不能提供的零部件。具体内容另行商定。
2.4 乙方保证向甲方转让的技术秘密和技术资料不受任何第三者的指控。
第三条 价格和支付方式
3.1 为了支付转让2.1条款中所规定的12v一400zc型中速船用主机的技术秘密和技术资料费用，乙方应向甲方交付费用如下：
_________年_________u.s.d（大写_________元整）
_________年_________u.s.d（大写_________元整）
_________年起以后的_________年中按每年将产值（即每年总产值扣除进口部分价值和税收费用后的产值）其提成费为_________％。
3.2 合同签署生效后三十（30）天内，甲方按照由银行提交的乙方下列单据，予以第一次支付总金额的_________％，即_________u.s.d（大写：_________美元整）
（1）根据附件_________要求，提供第一批资料的空运提单；
（2）经甲方确认的__________________银行出具不可撤销的保函，正副本各一份；
（3）乙方方的商业发票：一式两份；
（4）乙方方即期汇票一式两份。
3.3 于_________年_________月_________日甲方按收到乙方提交的下列单据后，予以第二次交付_________年总金额的_________％现金，即u.s.d（大写：_________美元整）。
（1）按附件_________要求于_________年_________月_________日提供第二批资料空运提单。
（2）乙方方商业发票一式两份。
（3）乙方方即期汇票一式两份。
3.4 双方同意_________年用现金支付，_________年付_________％现金，其余_________％金额用甲方返销产品补偿。
3.5 _________年的费用本年_________月_________日支付，乙方方交付商业发票一式两份。
3.6 自_________年起及其各年份按3.1款规定的提成费用应在每年_________月_________日在收到乙方方商业发票（一式两份）后支付。
3.7 在合作生产期间鉴于甲方遵照3.1款已向乙方交付了转让技术秘密的部分费用，各合资经营时机成熟，双方同意成立合资经营企业时，则乙方将其剩余部分的技术秘密费用可作提资的一部分。一旦双方不能进行合资经营，在五（5）年之内合作生产被迫终止时，甲方确认向乙方支付技术秘密费用的剩余部分。若出现上述情况，对支付技术秘密费用的进度和方式由双方在通常时候予以协商。
第四条 合作生产的补偿贸易
4.1 为有利甲方的外汇平衡，乙方同意甲方生产12v—400ze，12v—600zc中速船用主机返销给乙方。
4.2 上述订单的总价必须保证不低于甲方每年向乙方反付购买零部件所需费用总额的_________％。乙方同意在甲方补偿能力扩大及乙方需求扩大的前提下，其补偿的百分比可以不受限制。
4.3 甲方将以优惠价格向甲方提供产品，其品种、数量、交货期等将由双方在每批合同中商定。甲方产品必须符合乙方的标准。
4.4 乙方要求在甲方接到上述产品图纸后立即试制12v—400zc型中速船用主机。首批产品各一台将分别在双方进行试验，在试验合格的基础上乙方要求甲方于_________年内提供12v—400zc型中速船用主机_________台。其价格、交货期在签订正式合同时商定。
第五条 保 证
5.1 乙方保证，在合同有效期内所供应的资料应是最新技术的代身，其内容和甲方目前使用的完全一致。
5.2 乙方保证所供资料是完整的、正确的、清晰的。
第六条 税 费
6.1 凡因履行本合同需缴纳的一切税收，发生在甲方方以外的均由乙方承担。
6.2 凡因履行本合同需缴纳的一切税费，发生在甲方以内的均由甲方承担。
第七条 商 标
7.1 甲方有权使用乙方商标和合同产品的序号。甲方将下列商标标明在甲方所生产的合同产品上。
7.2 甲方制造的铬牌、报价单、技术规格书、广告、说明书、样本等，凡是合同产品均以甲方名称来表示。
第八条 包 装
8.1 须用坚固的木箱包装，适合长途海运、防湿、防潮、防震、防锈、耐粗暴搬运。由于包装不良所发生的损失，卖方应负担由此而产生的一切费用和/或损失。
8.2 卖方应在每件包装上，用不退色油漆清楚地标刷件号、尺码、毛重、净重、“切勿受潮”等字样，并刷有下列唛头：_________
8.3 装箱单两份，注明毛重、净重、尺码和所装货物每项的品名和数量。
第九条 人力不可抗拒
9.1 签约双方中的任何一方由于战争及严重的火灾、水灾、台风和地震或其他双方同意的事件而影响执行合同时，双方同意延长合同期限，延长时间相当于事故所影响的时间。
9.2 责任方应尽快将发生的人力不可抗拒事故的情况用电报通知另一方，并在十四（14）天以内以航空、挂号信将有关部门出具的证明文件交给另一方确认。
9.3 受人力不可抗拒事故延续到一至二十（20）天以上时，双方应通过友好协商尽快解决合同继续执行的问题。
第十条 仲 裁
10.1 因执行本合同所发生的或与本合同有关的一切争执，双方应通过友好协商解决。已经协商仍不能达成协议时，则提交仲裁解决。
10.2 仲裁地点在瑞典斯德哥尔摩商会。
10.3 仲裁裁决是终局裁决，对双方均有约束力。
10.4 仲裁费用除仲裁机关另有裁决外，应由败诉方负担。
10.5 除了在仲裁过程中进行仲裁的那部份外，合同的其余部分在仲裁期间仍继续执行。
第十一条 合同生效及其他
11.1 本合同于_________年_________月_________日由双方代表在_________正式签字，自签字之日起1周内本合同应经有关部门批准后生效。
11.2 本合同以英文书就一式四份，双方各执一式两份。
11.3 本合同有效期见第十一条所述。
11.4 本合同附件为本合同不可分割的部份，与正文有同等效力。
11.5 双方在本合同生效前交换的所有文件、函电等在本合同生效的同时自动失效。
11.6 本合同只能根据同双方授权代表签名或盖章的书面文件进行变更、追加或修改。
11.7 在执行合同期内双方的通讯均以函电进行，书信往来一式两份。
第十二条 法定地址
甲方地址：_________
乙方地址：_________
甲方（盖章）：_________ 乙方（盖章）：_________
法定代表人（签字）：_________ 法定代表人（签字）：_________
_________年____月____日 _________年____月____日
签订地点：_________ 签订地点：_________
附件
article 1
_________.（hereinafter referred to as part a）and _________.（hereinafter referred to as part b）
have agreed， after friendly discussion， to run a medium speed marine main engine factory in the form of a joint - venture company. since the conditions for the joint - venture are not yet ready， both parties shall start up a joint - production with compensation trade as the first step of co - operation with the following conditions:
1.1 part b shall transfer the technical know - how and the complete technical documentation to part a for manufacturing medium speed marine main engines （hereinafter called contracted products） of the following types:
12v- 400zc medium speed marine main engine;
12v- 600zc medium speed marine main engine.
1.2 definition， scope and delivery of technical documentation: the definition of technical documentation （hereinafter referred to as documentation） in article 1.1 of this contract means that the contracted products supplied by part b are composed of three parts: general technical documentation， products design drawings and manufacturing technical documentation， as used by part b. all of them should contain the technical know - how details.
（1）general technical documentation includes:
a. the technical specifications of the medium speed marine main engine of type 12v- 600zc （including sub - assembly， assembly， test run， delivery tests， etc. ）;
b. the technical specifications of the main components of the medium speed marine main engine of type 12v - 400zc;
c. overall dimensions， installation dimensions， and performance data of the accessories used by the contracted products.
（2）products design drawing:
products design drawings of the contract products supplied by part b， shall inclued:
a. a complete set of production drawings of the contracted products （including the final assembly drawings， components drawings， system diagram， principle diagram， and detailed drawings of all components）;
b. the calculating data and calculation manual of the contracted products;
c. drawings， calculating manual and other data given to the classification societies and certificate issued by the classification societies;
d. test platform design drawings and its technical documents.
（3）manufacturing technical documentation:
manufacturing technical documentation of the contracted products provided by part b shall include: the whole detailed instructive documentation and main components for the manufacturing of the contracted products， which shall include: requirements of quality inspection means， processes and technical conditions of acceptance test to the raw materials and components of the contracted products during and after the manufacturing processes.
（4）modification of documentation:
if the documentation to be supplied is modified by site as a result of using new technology to improve the products， processes and reduce the cost， the detailed information shall be submitted to part a in written form.
（5）mode of providing documentation:
a. for general technical documentation， three prints of three legible copies should be provided;
b. for design drawings， one manufacturing transparency and two prints shall be provided;
c. for manufacturing technical documentation， two prints shall be provided;
d. the duplicated documentation， which had been supplied before， can be exemped， but must be noted in the list.
（6）delivery schedule of documentation:
a. according to the definition of documentation， in order to facilitate the manufacturer of medium speed marine main engine of type 12v - 400zc， part b shall deliver the whole technical documentation and drawing of contracted products to part a within 30 days after the signing of the contract;
b. according to the definition of documentation in order to manufacture the medium speed maline main engine of type 12v - 600zc， site shall submit to part a the whole technical documentation and drawings of the contracted products before_________$$$after the signing of the contract.
1.3 the products manufactured by part a shall be resold to part b as follows:
medium speed marine engine of type 12v - 400zc_________sets per year;
medium speed marine engine of type 12v- 600zc_________sets per year;
1.4 the period of joint - production with compensation trade is two years. should the conditions for establishing a joint - venture be still not ready after the said period， the said period can be extended， but in no circumstances shall it be extended for more than five years.
article 2 transfer of technical know- how and technical documentation
2.1 the complete technical documentation of designs， calculations， drawings， manufacturing processes， quality control， tests， installation， adjustment， operation and maintenance shall be provided by part b to part a concerning the contracted products and must be the same as those being currently used by part b.
2.2 checking and verifying the documentation of the contracted products:
part b shall be responsible for the completeness， correctness and legibility of the product design drawings and manufacturing technical documentation sent to part a. in case any part of the said drawings and documentation are missing， part b shall make supplementary delivery of correction immediately upon notification by part b.
2.3 during the joint- production period， part b shall， at most favoured prices， supply part a with spare parts of the contracted products which are not available in the market of part as side. these supplies are subject to separate agreements in due course.
2.4 part b guarantees that the transfer of the technical knowhow and technical documentation hereof will not involve any accusation from any third party.
article 3 prices and termsof payment
3.1 part a shall pay part b for the transfer of technical knowhow and technical documentation of the medium speed marine main engine of type 12v- 400zc stipulated in clause 2.1 as follows:
_________us _________（say: _________u.s.d. only）
_________us _________（say: _________u.s.d. only）
during the 2 yearsperiod commencing from 19 ，the yearly fee shall be taken as _________% of the net annual production value （total annual production value minus the value of the imported parts and tax expenses）.
3.2 the first payment is us $ _________（say: _________u.s.d.only） constituting
% of total payment and shall be made within 30（thirty） days after the contract is signed and comes into force， upon receipt of the following documents from part b through the bank_________:
（1）supply air- freight bill of the first batch of documentation according to the requirement of appendix_________;
（2）irrevocable letter of guarantee in duplicate（one original，one copy）issued by_________band and confirmed by part a.
（3）part b commercial invoice in duplicate;
（4）part b sight draft in duplicate.
3.3 the second payment shall amount to _________% of the total payment due in _________， i.e. _________u.s.d. （say: _________u.s.d. only） and shall be paid to part b on _________， _________. upon the receipt by part a from part b of the following documents:
（1）air - freightbillof thesecondbatchof documentationdeliveredbypart bon_________， _________，pursuant to stipulations in appendix_________;
（2）part b commercial invoice in duplicate;
（3）part b sight draft in duplicate.
3.4 both parties agree to settle in cash in _________while the settlement in _________will be_________% in cash and the remaining _________% shall be made through compensation of resale from part a.
3.5 the payment of _________ will be due on_________ th _________of the year upon receipt of the commercial invoices in duplicate from part b.
3.6 the yearly payments from 19 onward as per clause 3.1. are due on _________， _________， of each year upon receipt of 2 copies of the commercial invoice from part b.
3.7 part of the know - how transferring fee would be paid to part b by part a as per clause 3.1. during the joint - production period， and the unpaid part would be converted as the investment of part b to the joint - venture when the joint-venture comes to realisation. should the joint - venture miscarry and the joint- production be forced to terminate within 5 （five） years， part a shall confirm that the unpaid part of the know - how transferring fee shall fully be remitted to part b by part a. in each of the above - mentioned cases， evaluating the mode of payment of the know - how transferring fee shall be agreed upon by both parties through consultation in due course.
article 4 joint- production andcompensation trade
4.1 for the purpose of balancing part a s foreign exchange， part b agrees to buy - back the medium speed marine main engines of type 12v- 400zc and 12v- 600zc produced by part a.
4.2 the total value of the above mentioned orders shall not be less than _________% of the expenses for purchasing components by part a from part b. part b agrees that under the prerequisite of increased compensation capability of part a and increased demand of part b the percentage of payments compensated through the back - sale of pites products can be increased without limitation.
4.3 products supplied to part b by part a shall be at favourable prices， types， quantity， and delivery time of the products shall be agreed in the contract for every order by both pareties. quality of part as products has to meet part bs standard.
4.4 part b shall require part a to start the trial production of medium speed marine main engine of type 12v - 400zc immediately upon receiving their drawings. the first products， one for each party， shall be tested separately by both parties and part b shall， on the basis of satisfactory tests， require part a to deliver_________（ _________）sets of medium speed marine main engine of type 12v- 400zc within 19 _________. the prices and delivery periods shall be agreed upon when the contract is concluded.
article 5 guarantee
5.1 part b guarantees that the documentation supplied shall be of the latest technological achievement within the valid period of the contract and shall be exactly identical with the documentation currently used by part b.
5.2 part b guarantees that the documentation supplied shall be complete， correct and legible.
article 6 tax and duty
6.1 all taxes， customs and other duties in connection with the performance of the contract arising outside the part a side shall be borne by part b.
6.2 all taxes， customs and other duties in connection with the performance of the contract arising inside the part a side shall be borne by part a.
article 7 trademark
7.1 part a shall have the right to use the part b trademark and serial number of contracted products. part a shall label the trademark smith - portla co， ltd. on the contracted products so produced.
7.2 nameplates， quotations， technical specifications， advertisement， instruction manuals， samples of the contracted products manufactured by part a shall all be labelled with the name of part a.
article 8 packing
8.1 packing shall be in the form of strong wooden case （s） suitable for long voyage and well protected against dampness， moisture， shock， rust and rough handling. the seller shall be liable for any damage to the goods and extra expenses due to improper packing， inadequate or improper protective measures.
8.2 the package number， measurements， gross weight， net weight， the words "keep away from moisture"and the following shipping marks shall be printed with fadeless paint on each package:
（1）part b/part a 12v - 400zc
（2）part b/part a12v- 600zc
8.3 packing list in duplicate indicating gross and net weight，measurements and quantity of each item is included.
article 9 force majeure
9.1 should either party of the contract be prevented from implementing the contract by such cases of force majeure as war， serious fire， flood， typhoon and earthquake， or other events confirmed by both parties， the time for implementing the contract shall be extended by a period equal to the effect of such force majeure.
9.2 the party concerned shall notify the other party by cable within the shortest possible time after occurrence of the force majeure and send by registered airmail within 14 （fourteen） days to the other party a certificate issued by relevant authorities for confirmation.
9.3 should the effects of force majeure continue for more than 120 （one hundred twenty） consecutive days， both parties shall settle further execution of the contract through friendly negotiations as soon as possible.
article10 arbitration
10.1 all disputes relating to the contractor arising from the execution of the contract shall be setfled through friendly consultations between both parties. should no settlemnt be reached， the disputes shall be submitted to arbitration.
10.2 the arbitration shall take place in stockholm， sweden， and be conducted by the arbitration institute of the stockholm chamber of commerce.
10.3 the arbitration award shall be final and binding on both parties.
10.4 the arbitration fee shall be borne by the losing party except otherwise awarded by the arbitration institute.
10.5 in the course of arbi. tration， the contract shall continuously be executed by both parties except for the part which is under arbitration.
article 11 effectivenessof the contract and miscellaneous
11.1 this contract is formally signed by the representatives of both parties in_________/ （place） on
_________， and shall be approved by the relevant authorities within one week to become effective.
11.2 this contract shall be written in english in four copies. each party shall keep two copies.
11.3 the duration of the contract is stipulated in art. 11.
11.4 appendix to the contract shall form an integral part of the contract and shall have the same binding force as the contract itseff.
11.5 all documents， letters， telegrams and telexes interexchanged between both parties before the signing of the contract shall become null and void automatically from the date on which the contract comes into force.
11.6 this contract can only be altered， amended and supplemented in accordance with the documents which have been signed or stamped by the authorised representatives of both parties.
11.7 letters， telegrams and telexes shall be used for communication between both parties during the contracted period. letters shall be in duplicates.
article 12 legal addresses
parta（address）：_________ partb（address）：_________
party a(signature):_________ party b(signature):_________
date:_________ date:_________
篇10：技术合作保密协议
本协议书由以下双方于___年___月___日签署并生效。
甲方：___________(以下简称“甲方”)
乙方：___________(以下简称“乙方”)
本协议书由以下双方于___年___月___日签署并生效。
1.甲方与乙方进行技术及业务合作事宜，双方将以书面或口头形式要求对方提供，并将拥有或已经拥有对方某些非公开的、保密的、专业的信息和数据;
2.双方愿以本协议规定对本协议项下的保密信息承担保密义务。
为此，双方达成协议如下：
第一条定义
保密信息：指提供方向接受方提供的，属于提供方或其股东及其他关联公司所有或专有的，或提供方负有保密义务的有关第三方的下列资料及所有在信息载体上明确标示“保密”的材料和信息。
需保密材料包括但不限于：集成电路设计版图数据、业务记录和计划、贸易机密、技术资料、产品项目、产品设计信息、价格结构、成本等非公开的、保密的或专业的信息和数据。
第二条保密信息不包括以下信息：
1.在接受保密信息之时，接受方已经通过其他来源获悉的、无保密限制信息;
2.一方通过合法行为获悉已经或即将公诸于众的信息;
3.根据政府要求、命令和司法条例所披露的信息。
第三条接受方在接受保密信息后，必须承担以下义务：
1.对保密信息谨慎、妥善持有，并严格保密，没有提供方事先书面同意，不得向任何第三方披露;
2.接受方仅可为双方合作之必需，将保密信息披露给其指定的第三方公司，并且该公司应首先以书面形式承诺保守该保密信息;
3.接受方仅可为双方合作业务之必需，将保密信息披露给其直接或间接参与合作事项的管理人员、职员、顾问和其他雇员(统称“有关人员”)，但应保证该类有关人员对保密信息严格保密;
4.若具有权力的法庭或其他司法、行政、立法机构要求乙方披露保密信息，接受方将(1)立即通知提供方此类要求;(2)若接受方按上述要求必须提供保密信息，接受方将配合提供方采取合法及合理的措施，要求所提供的保密信息能得到保密的待遇;
5.若接受方或有关人员违反本协议的保密义务，接受方须承担相应责任，并赔偿提供方由此造成的损失。
第四条没有得到另一方的书面同意，任何一方不得将其在本协议书项下的权利和义务转让给第三方。
第五条双方同意，本协议生效后，如国家颁布有关产权资料的出口、再出口的法律法规与管理条例，双方有义务遵守这些法律法规与管理条例。
第六条本协议的各部分构成完整的保密协议，并取代双方此前任何有关本协议所述事项的理解或协议。
未经他方书面同意，本协议不得变更或修改。
第七条双方承认并同意，除提供方以书面形式明确表达外，提供方向接受方披露保密信息并不构成提供方向接受方转让或授予接受方享有提供方对其商标、专利、技术秘密或其他知识产权拥有的利益，亦不构成向接受方转让或其他知识产权等有关利益。
第八条本协议接受中国法律管辖并按中国法律解释。
对因本协议项下各方的权利和义务而发生的有关的任何争议，双方应首先协商解决，如无法通过协商解决，则应在____仲裁解决。
第九条本保密协议自双方授权代表签署之日起生效，且在双方合作期间和合作结束完成之后_____年内持续有效。
第十条本协议一式二份，具有同等效力，双方各持一份。
甲方：__________________ 乙方：__________________
______年______月______日 ______年______月______日
篇11：国际技术服务合同_合同范本
在____注册成立的____公司(以下简称甲方)和中国____公司(以下简称乙方)、于____年____月____日签订本技术服务合同：
第一条
1.应甲方邀请，乙方同意派遣____名工程师组成的中国技术服务组，于___年____月____日赴____(甲方国名)的____(市)(或某工地);
2.在____(甲方国名)，受甲方邀请的乙方中国技术服务人员应有准备，并且愿意同____甲方的____公司共同工作。
第二条
乙方人员在____(甲方国名)期间，应服从甲方国家的法律，受甲方的管理规章制度约束。
第三条
1.(1)甲方负责向乙方人员支付乙方提出的每人每月____(币别)的免税技术服务费。
(2)上述免税技术服务费的____%应以美元(或英镑)支付。
(3)本条(1)款提及的技术服务费自乙方人员到达____(甲方国名)之日起开始计算。
2.(1)在甲方服务期间，乙方人员在工作或业余的全部时间内，应保证行为端正。
(2)甲方对乙方人员在甲方服务期间的犯罪行为不承担责任。
第四条
甲方负担乙方人员往返中国和____(甲方国名)的国际旅费和每人不超过20公斤的超重行李费，并负责安排机票。
第五条
1.第三条1(1)款中所提的技术服务费的____%应以____币(即甲方的国币)支付给在____的中国服务组，其余____%应由甲方按银行当日公布的兑率折成美元(或英镑)。
2.所折成的美元(或英镑)应电汇____(如伦敦)中国银行转汇北京(或其它中国城市)中国银行营业部____公司(即乙方公司)____号帐户。
3.甲方应以书面形式将汇票情况通知中国驻甲方国大使馆经参处。
第六条
甲、乙双方执行合同期间，甲方同意：
1.为乙方技术服务组人员免费提供设备齐全的住宿;
2.为乙方技术服务组人员免费提供交通工具;
3.免费提供乙方必要和充分的劳保用品;
4.为乙方技术人员免费提供人寿保险;
5.为乙方技术服务人员免费提供足够的办公设施和用品;
6.在指定的医院或诊所为技术服务组人员提供免费医疗，但，不包括镶牙、配镜和性病的治疗。
7.乙方技术服务组人员因公出差，应按照甲方人员待遇，发给出差补助费，以____币(甲方国币)支付给乙方技术服务组。
第七条
合同期间，乙方技术人员享受中、____(甲方国名)两国的全部公共假日。
第八条
1.乙方人员每年享受三十天的休假，工资照发(从开始工作之日算起工作十一个月，第十二个月为休假)。休假间工资应全部以美元(或英镑)支付。
2.乙方技术人员每年应得____元(甲方国币)的奖金，奖金的____%以美元(或英镑)支付。
3.在甲方服务期间，甲方为乙方技术人员回国休假提供往返经济舱机票。
第九条
甲方还同意为乙方人员办理移民手续，其中包括：
1.办理出入境签证;
2.为乙方人员办理合同规定雇用期间的长期居住许可;
3.承担本条1和2款所产生的费用。
第十条
在合同期间内，乙方技术人员由于家庭不幸和/或其它原因，可请紧急事假十天。
1.准予乙方人员事假时，甲方不负责：
(1)乙方事假人员旅费;
(2)本合同第三条1(1)款中所规定的技术服务费;
(3)因乙方人员事假期满后不能返回____(甲方国名)而换人时所需费用。
2.乙方应负责：
(1)从国内另行换人，替换不能返回甲方服务的技术人员;
(2)承担换人所需的全部费用。
(3)因乙方人员事假期满后不能返回____(甲方国名)而换人时所产生的费用。
3.(1)在合同期间内，由于甲方或所在国原因，致使乙方人员不能工作时，甲方同意：向乙方技术人员支付双方同意的技术服务费(见第三条1(1)款);
(2)因甲方原因终止合同、甲方违反合同或阻挠合同履行时，甲方同意：
a.按合同规定费用，向乙方人员支付三个月的技术服务费(见第三条1(1)款);
b.执行本合同第四条的规定。
第十一条
1.乙方技术人员因身体不好或工伤，在两个月内不能痊愈时，乙方同意：
(1)从中国另行派人替换上述人员;
(2)承担替换人员从中国到____(甲方国名)的旅费。
(3)甲方同意承担因病或工伤返回中国人员的旅费。
2.在合同期间内，技术服务组人员因工伤致残或死亡，甲方同意：
(1)处理事故、工伤或死亡的一切善后事宜;
(2)负担所产生的费用;
(3)按____(甲方国名)现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。
第十二条
本合同未尽事宜，由双方通过友好协商解决。
双方对本合同的解释如有不同意见，发生分歧和争执，或由本合同产生或与本合同有关的其它事项，应根据____(甲方国名)的现行法律，提交双方均能接受的唯一仲裁人解决。
第十三条
本合同的执行从____年____月____日开始，有效期限共____年，此为第一阶段。
____年合同期满后，双方应进一步商定延续合同期限和与之有关的条件。
第十四条
本合同共两份，分别用中、____文写成，双方各执一份。两种文本具有同等效力，并对双方均有约束力。
甲乙双方于上述日期签字盖章为证。
甲方签字人：____
甲方公司名称：____
见证人姓名：____
地址：____
职务：____
签名：____
乙方签字人：____
乙方公司名称：____
见证人姓名：____
地址：____
职务：____
签名：____
篇12：美容技术总监职责_合同范本
一、技术指导类
1、 向区域经理负责，对所在区域发型师、技师的技术进行全面指导。
2、 经常性巡查所在区域内的分店发型师的技术，每个店至少1次/月，并向区域经理汇报每次巡查情况，提交每次巡查的结果报告。
3、 为发型师解答在工作中遇到的技术难题，提供发型设计方面的咨询服务。
4、 详细了解所在区域发型师的技术水平，并定期作出评定，两个月/次/人。
5、 协助分店店长共同提高发型师的实际操作能力。
6、 帮助分店对发型技师的工作能力进行指导和训练。
二、培训考核类
1、 每个月底，将下一月的发型师技术提升方案和工作开展计划交区域经理审核。
2、 负责具体执行所在区域发型师的技术提升方案和岗位技术培训工作。
3、 负责区域内每个新入职发型师的技术考核和岗前培训工作。
4、 每月定期向区域经理汇报、总结各项技术培训及考核工作的进展情况。
5、 按照公司标准要求，定期考核所在区域发型师的技术能力，并上报管理中心和区域经理。
三、信息服务类
1、 每个季度发布最新的流行发型款式及季节性发型，并向发型师讲解实际操作过程中的处理技巧。
2、 经常性地向发型师提供新的技术和新的设计理念的培训信息及各类大型赛事信息。
3、 负责对所在区域的发型师进行新产品的功用，适合对象及操作技巧的讲解。
岗位职责：
1.负责中心整体技术平台搭建，技术方案筛选，制定符合本中心发展规划的具体技术发展路线和计划方案；
2.始终站在行业发展趋势前端，推进和提供适合本中心开展医疗美容项目的技术解决方法和手段；
3.组建和维护操作团队，制定各岗位的管理细则及工作流程，负责团队工作的开展及培训；
4.根据工作特点建立风险管理机制，制定应急措施，保障中心的各项医疗项目在安全性、可靠性和有效性基础上展开。
任职资格：
1.具有医疗管理、整形相关专业本科以上学历，具备各类微创美容仪器及产品的使用和理论知识；
2.从事过一线工作，具有较强的微创美容行业或岗位实际管理和操作经验；
3.具备丰富的团队建设、管理经验和良好的沟通技巧，有良好的培训口才；
4.具有海外同类机构同类岗位工作经验者优先。
篇13：最新技术工作计划范文参考_技术工作计划_网
自参加工作以来，遵守站及所在项目部的各项规章制度，积极服从领导的工作安排，圆满完成工作任务，满足施工单位进度，技术员个人工作计划。维护集体荣誉，思想上要求进步，积极响应站的号召，认真贯彻执行站文件及会议精神。工作积极努力，任劳任怨，认真学习相关试验知识，了解建筑新型材料检测及应用，不断充实完善自己。做到思想行动统一。坚持保证质量第一、安全第一的思想指导自己的工作。不放过工作中的每一个细节步骤。做到工作认真严谨、实事求是。耳边总是回想起当年大学第一节课上老师的一段话：建筑是一门艺术、技术并存的专业，更是一门影响国计民生、人命关天的行业。搞建筑我们得时刻谨记把安全第一记于心中，因而致使我们把工程质量放在第一位。检测监督工作就是质量把关的最重要的一环，不容置疑地抓好原材料、半成品、成品的质量。
在工作中认真贯彻国家有关标准化，质量管理体系，产品质量监督检验以及研究开发的方针政策;确实执行本岗位负责监督检测的工程产品的有关标准、试验方法及有关规定，做到所做每项检验都有法可依。做好委托单接受，项目检验，资料，反馈等工作，做好跟踪台帐，便于日后查阅。由于试验检验项目多，项目检验时间不一，提前将工作做到位，避免施工单位技术人员不了解工程检验要求及技术指标而延误工期，影响进度。我们试验室人员坚持四项基本原则，贯彻质量方针，落实质量目标，遵守规章制度，全心全意服务于施工现常
工作一年后转入现场施工管理。担任土建技术员。但依旧于严谨的工作态度对待现常由于以前的检测工作与现场管理工作差别比较大，这对我来说既可以说是机遇，也可以说是挑战。机遇就是进入小单位职位分工没有那么明确，总揽现场所有工作;挑战就是在经验实践缺乏的情况下担任现场技术总负责。以前仅靠自己的技术，而现在则也要抓好人员安排、施工进度计划等一大堆管理工作。一时工作压力极大。我时刻严格要求自己，遇到问题不断地请教有经验的同事、老师。各种方案作对比寻求最佳方法。自己摸索实践，在较短的时间内便熟悉了工作，完成了角色转换过程，明确了工作的程序、方向，提高了工作技能及管理能力，在具体的工作中形成了一个清晰的工作思路，能够顺利的开展工作并熟练圆满地完成本职工作，个人工作计划《技术员个人工作计划》。
1.专业知识、工作能力和具体工作
从拿到图纸到图纸会审，认真的查看每一个部位细节，核对数据，思考施工步骤方案。做到脑中有图。组织图纸会审。协调交换与业主、设计、监理各方意见。进入工程开工，认真了解每一个部位施工细节，按设计图纸要求，严格编制本专业施工方案，对关键点编制作业指导书，监理单位确认后执行。同时在施工准备过程中对班组进行技术、安全交底，班组对所施工内容做到心中有数，按施工规范严格要求。施工过程中，做好班组自检、复检、专职检“三检”工作，同时做好分部分项质量检验评定记录、隐蔽记录及相关质保资料。严格控制原材料、半成品、成品材料应用于工程。
由于自己的经验不足致使自己势必付出的劳动强度要比别人大，好在自己在学时的专业知识比较扎实。工作也严谨认真。使我记忆最深的就是测量时查出有条斜轴桩位偏离轴心三十公分，由于当时没有桩竣工图致使自己复核三遍多最后才确定打桩错误。打桩队也承认施工时失误;还有如某些承台加深时业主、监理要求钢筋笼相应增加，而那时钢筋已下好料。依据自己所学砼具有较强抗压性能这点再根据查阅资料和问有经验老师傅指点。坚信不增加钢筋的情况下依旧能满足工程需要。以致与设计方交流说服业主、监理做到省了不少钢筋，运用自己的所学理论知识结合实际情况，做到满足工程质量的前提下尽量降低建筑成本;还有首层梁板分开浇筑，可能对于老施工来说那是再简单不过的事，但说实话对于新手来说那是比较大的飞跃，至少能做到往满足工程质量的情况下为施工省材。虽说不是原创，但主要的是作为一名称职的技术员能取别人之长补自己之短。
2.工作态度和勤奋敬业方面
热爱自己的本职工作，能够正确认真的对待每一项工作，全身心地投入工作，认真遵守公司的各项规章制度。有效利用工作时间，坚守岗位，需要加班完成工作按时加班加点，保证工作能按时完成。在现场跟工人打成一片，做到以理服人。在工作之余还积极参加再教育培训，现已考取xx年度二级注册建造师资格证书及c牌驾驶证。
3.工作质量成绩、效益和贡献
在开展工作之前做好个人工作计划，有主次的先后及时的完成各项工作，达到预期的效果，保质保量的完成工作，工作效率高，同时在工作中学习了很多东西，也锻炼了自己，经过不懈的努力，使工作水平有了长足的进步，开创了工作的新局面，为公司工作做出了应有的贡献。
共2页，当前第1页12
篇14：建设工程技术咨询合同_合同范本
建设单位（甲方）：____________________________
地 址：____________ 邮码____________ 电话____________
法定代表人：____________ 职务____________
咨询单位（乙方）：____________________________
地 址：____________ 邮码____________ 电话____________
法定代表人：____________ 职务____________
为使____建筑安装工程的构想科学，设计和施工经济、合理，建设速度快，误差小，经甲乙双方充分协商，特订立本合同。
第一条 甲方应于____年____月____日以前将规划局红线图、上级部门批文、委托书以及建筑安装工程的建筑面积、安装项目、消防方式、库房每层净高等资料提交乙方。
第二条 乙方根据甲方要求，对________建筑安装工程的地形、地质条件、建筑安装构想等进行可行性研究，最后编制出设计任务书及匡算表，于________年____月____日以前交付甲方。
第三条 甲方根据国家主管部门规定的工程设计收费标准，承付乙方咨询费 元。自本合同签订之日起____日内，甲方先付给乙方____元，待乙方将设计任务书及匡算表交付甲方后____日内，再付给乙方____元。
第四条 为本咨询工程需要到外地进行调研、收集资料人员的差旅费，由甲方负担。
第五条 甲方的违约责任
1.甲方如不按本合同规定的时间向乙方送交有关文件、图纸和资料，乙方可按耽误的时间顺延交付设计任务书及匡算表的时间。
2.甲方如不按本合同规定的时间向乙方交付咨询费，迟延一天，按迟延交付款额罚款____‰。
3.甲方如果中途中断咨询请求，乙方咨询工作已经过半的，应付给乙方全部咨询费；咨询工作尚未过半，按总咨询费的50％收费。
第六条 乙方的违约责任
1.乙方如不按本合同规定的时间交付设计任务书及匡算表，迟延一天，按总咨询费金额罚款____‰。
2.乙方如中途中断咨询，应按总咨询费向乙方交付罚款。
3.乙方所提供的技术咨询服务，因质量缺陷或过错给甲方造成经济损失的，应负责赔偿。如果由此引起重大事故，造成严重后果的，还应追究其主要负责人的行政责任或刑事责任。
第七条 其他约定________________________________________
本合同自签订之日起，甲乙双方不得随意更改。如有未尽事宜，需经双方协商解决。
本合同正本一式两份，甲乙双方各执一份，合同副本一式____份，分别交________建筑工程主管部门、建行____等单位各一份。
建设单位（甲方）：________________________________
负责人：__________________________________________
____年____月____日
咨询单位（乙方）：________________________________
负责人：__________________________________________
____年____月____日
篇15：技术服务合作合同书范本_合同范本
技术服务合同具有以下特征：第一，合同标的是解决特定技术问题的项目。第二，履行方式是完成约定的专业技术工作。第三，工作成果有具体的质量和数量指标。第四，有关专业技术知识的传递不涉及专利和技术秘密成果的权属问题。
今天第一范文网小编要与大家分享的是：技术服务合作合同书相关范本。具体内容如下，欢迎参考阅读：
技术服务合作范本一
委托方(以下称甲方)：________________________________
服务方(以下称乙方)：________________________________
甲乙双方为携手合作，促进发展，满足利益，明确责任，依据中华人民共和国有关法律之相关规定，本着诚实信用、互惠互利原则，结合双方实际，协商一致，特签订本合同，以求共同恪守：
第一条 项目名称：玫瑰园社区展示区(售楼部)园林景观工程_____。
第二条 服务内容、方式和要求：
1、服务内容：乙方负责该项目的技术、施工管理，工程现场管理、现场签证、工程验收、工程结算等。
2、服务方式：甲方负责该项目的全部资金，材料供应，施工队伍选择;乙方负责该项目的全部技术、施工管理，工程现场管理、现场签证、工程验收、工程结算等。
第三条 报酬及其支付方式：
1、本项目报酬：按玫瑰园社区展示区(售楼部)园林景观工程合同总造价的2.5%收取技术服务费(不含税)。服务方完成专业技术工作，解决技术问题需要的经费，由__甲方_负担。
2、支付方式为如下：
(1)合同签字生效后，技术服务费于每月月底由甲方按报酬总额的30%向乙方支付，直至付到合同报酬额的90%;留存10%做为质保金。
(2)待合同履行完成后(验收合格之日起)___10___日内甲方向乙方支付全部报酬余额。
第四条 甲方的主要义务
1.在合同签字生效后向乙方提供技术资料、数据、材料、样品等。
2.在接到乙方关于要求改进或更换不符合合同约定的技术资料、数据、材料、样品的通知2天内及时做出答复;
3.按约向乙方支付报酬，乙方开户银行帐户为：______________。
4.协助乙方完成下列配合事项： _材料的供应，资金到位，施工队伍及人数满足乙方要求___。
第五条 乙方的主要义务
1.在约定的时间前完成技术服务工作;
2.发现甲方提供的技术资料、数据、样品、材料或工作条件不符合合同约定时，应在合同生效后3天内通知委托方改进或者更换;
3.应对甲方交给的技术资料、样品等妥善保管;在合同履行过程中，如发现继续工作对材料、样品或设备等有损坏危险时，应中止工作，并及时通知委托方;工作完成后应归还上述技术资料、样品，不得擅自存留复制品。
第六条 保密条款
1、双方保证对从另一方取得且无法自公开渠道获得的商业秘密(技术信息、经营信息及其他商业秘密)予以保密。未经该商业秘密的
原提供方同意，一方不得向任何第三方泄露该商业秘密的全部或部分内容。但法律、法规另有规定或双方另有约定的除外。
2、一方违反上述保密义务的，应承担相应的违约责任并赔偿由此造成的损失。
第七条 甲方的违约责任
1.甲方未按照合同约定提供有关技术资料、数据、样品和工作条件，影响工作质量和进度的，应当如数支付报酬。逾期一个月不提供约定的物质技术条件，乙方有权解除合同，甲方应当支付数额为报酬总额10%的违约金。
2.甲方迟延支付报酬，应当支付数额为报酬总额5%的违约金，逾期二个月不支付报酬或者违约金的，应当交还工作成果，补交报酬，支付数额为报酬总额10%的违约金。
第八条 乙方的违约责任
1.擅自不履行合同，应当免收报酬并支付数额为报酬总额1%的违约金。
2.未按约定的期限完成工作的，应支付数额为报酬总额5%的违约金。
3.未按质按量完成工作的，应当负责返工改进或如数补。如果给甲方造成损失的，应赔偿损失;
4.在工作时间，发现对方提供的技术资料、数据、样品、材料或工作条件等不符合合同规定，未按约定期限通知委托方，造成技术服
务工作停滞、延误或不能履行的，应酌减或免收报酬;
5.在工作期间，发现委托方提供的物品有受损的危险，未按约定期限通知委托方，应对由此造成的损失承担责任。
6.对甲方交付的样品，材料及技术资料保管不善，造成灭失、短少、变质、污染或者损坏的，应赔偿损失。
第九条 不可抗力
1、本合同所称不可抗力是指不能预见、不能克服、不能避免并对一方当事人造成重大影响的客观事件，包括但不限于自然灾害如洪水、地震、火灾和风暴等以及社会事件如战争、动乱、政府行为等。
2、如因不可抗力事件的发生导致合同无法履行时，遇不可抗力的一方应立即将事故情况书面告知另一方，并应在10天内，提供事故详情及合同不能履行或者需要延期履行的书面资料，双方认可后协商终止合同或暂时延迟合同的履行。
第十条 争议的处理
1、本合同受中华人民共和国法律管辖并按其进行解释。
2、本合同在履行过程中发生的争议，由双方当事人协商解决，也可由有关部门调解;协商或调解不成的，按下列第 2 种方式解决：(1)提交仲裁委员会仲裁;
(2)依法向人民法院起诉。
第十一条 补充与附件
1、本合同未尽事宜，依照有关法律、法规执行，法律、法规未
作规定的，甲乙双方可以达成书面补充协议。本合同的附件和补充协议均为本合同不可分割的组成部分，与本合同具有同等的法律效力。 第十九条 合同效力
2、本合同自双方或双方法定代表人或其授权代表人签字盖章之日起生效。有效期从自20xx年9月20日至20xx年12月19日止。本合同一式二份，双方各执一份，具有同等法律效力。
甲方(盖章)：______________ 乙方(盖章)：__________
法定代表人或负责人：_________ 法定代表人或负责人：________
____年____月____日 ____年____月____日
签订地点：_________ 签订地点：_________
技术服务合作合同书范本二
合同编号: DORUN-20xx0420xx甲方：
乙方：北京德元国际科技有限公司
第1条 项目名称
第2条 甲方责任
按《技术服务项目定制单》(见附件)提供乙方所需的实验材料; 与乙方协商确定实验方案; 按照约定向乙方支付经费。 第3条 乙方责任
按《技术服务项目定制单》(见附件)确认甲方提供的实验材料; 按照双方协商确定的方案进行项目实验;
按照约定在项目完成后向甲方提供产生的数据和生物材料。 第4条 项目收费
本次技术服务总费用为 元(人民币 元整)。 具体收费项目及付款方式见附件《技术服务项目定制单》。 乙方财务信息： 开户银行： 帐号： 第5条 质量保证
乙方承诺所提供的实验数据和产品是真实和可靠的。 技术服务完毕后，甲方如对乙方提供的实验数据或产品质量存有异议，请在收到实验结果后10天内向乙方提出。在上述规定的期限内，乙方将积极配合甲方对原始实验数据的复核;如果超过上述规定期限，乙方将不对原始数据的复核承担责任和义务，但仍然会与客户沟通，并解答相关问题。 第6条 服务周期
乙方收到项目所需所有材料和预付款后开始技术服务并承诺在双方约定的时间内完成实验(详见附件《技术服务项目定制单》)。如因客观原因使实验不能顺利进行(如甲方提供延。)
第7条 保密责任
乙方对甲方项目数据及生物材料负有保密责任;甲方对乙方采用技术路线、收费标准负有保密责任。
第8条 违约责任和争议的解决办法
本合同在执行过程中，双方应严格遵守，如发生争议，应本着友好协商的原则解决。协商无效，则由法律部门裁决。
本合同一式两份，甲乙双方各执一份，具有同等效力。经盖章后的传真件也具有同等法律效力。合同自双方签字盖章之日生效。 第9条 附件
双方签字确认的以下附件内容与本合同具有同等效力。 附件：技术服务项目定制单
甲方： 乙方：北京德元国际科技有限公司
(单位盖章或负责人签名) (单位盖章)
年 月 日
年 月 日
篇16：可再生能源技术服务合作协议
项目名称：
委托方(甲方)：
服务方(乙方)：
填写说明
一、“合同登记编号”的填写方式：
合同登记编号为十四位，左起第一、二位为公历年代号，第三、四位为省、自治区、直辖市编码，第五、六位为地、市编码，第七、八位为合同登记点编号，第九至十四位为合同登记序号，以上编号不足位的补零。各地区编码按GB2260?4规定填写。
二、技术服务合同是指当事人一方以技术知识为另一方解决特定技术问题所订立的合同。技术服务合同中包括技术培训合同和技术中介合同。
技术培训合同是指当事人一方委托另一方对指定的专业技术人员进行特定项目的技术指导和专业训练所订立的合同。
技术中介合同是指当事人一方以知识、技术、经验和信息为另一方与第三方订立技术合同进行联系、介绍、组织工业化开发并对履行合同提供服务所订立的合同。
三、计划内项目应填写国务院部委、省、自治区、直辖市、计划单列市、地、市(县)级计划。不属于上述计划的项目此栏划(/)表示。
四、服务内容、方式和要求：
包括技术服务的特征、标的范围及效益情况;特定技术问题的难度、主要技术经济指标;具体的做法、手段、程序以及交付成果的形式。
属技术培训合同的此条款填写培训内容和要求，以及培训计划、进度。
属技术中介合同此条款填写中介内容和要求。
五、工作条件和协作事项：
包括甲方为乙方提供的资料、文件及其他条件，双方协作的具体事项。
属技术培训合同此条款填写培训所需必要场地、设施和试验条件，以及当事人各方应当约定的提供和管理有关场地、设施和试验条件的责任。
六、其他：
合同如果是通过中介机构介绍签订的，应将中介合同作为本合同的附件。如果双方当事人约定定金、财产抵押担保的，应将给付定金、财产抵押及担保手续的复印件作为本合同的附件。
七、委托代理人签订合同时，应出具委托证书。
八、本合同书中，凡是当事人约定认为无需填写的条款，在该条款填写的空白处划(/)表示。
依据《中华人民共和国民法典》的规定，合同双方就 项目的技术服务(该项目属 计划)，经协商一致，签订本合同。
一、服务内容、方式和要求：
应当填写培训内容和要求、培训计划、进度;属技术中介合同当应填写中介内容和要求。
二、工作条件和协作事项：
三、履行期限、地点和方式：
四、验收标准和方式：
技术服务或者技术培训按 标准，采用 方式验收，由 方出具服务或者培训项目验收证明。
本合同服务项目的保证期为 .在保证期内发现服务质量缺陷的，服务方应当负责返工或者采取补救措施。但因委托方使用、保管不当引起的问题除外。
五、报酬及其支付方式：
(一)本项目报酬(服务费或培训费)： 元。
服务方完成专业技术工作，解决技术问题需要的经费，由 方负担。
(二)本项目中介方活动经费为： 元，由 方负担。
中介方的报酬为： 元，由 方支付。
(三)支付方式(按以下第 种方式)：
①一次总付： 元，时间：
②分期支付： 元，时间：
元，时间：
③其他方式： 。
六、违约金或者损失赔偿额的计算方法：
技术服务违反本合同约定，违约方应当按________________________规定，承担违约责任。
技术培训违反本合同约定，违约方应当按________________________规定，承担违约责任。
技术中介违反本合同约定，违约方应当按________________________规定，承担违约责任。
(一)违反本合同第 条约定，____方应承担违约责任，承担方式和违约金额如下：
(二)违反本合同第 第约定，____方应承担违约责任，承担方式和违约金额如下：
(三)
七、争议的解决方法：
在合同履行过程中发生争议，双方应当协商解决，也可以请求________进行调解。
当事人不愿协商、调解解决或者协商、调解不成的，双方商定，采用以下第____种方式解决。
(一)因本合同所发生任何争议，申请________ 仲裁委员会仲裁;
(二)向________人民法院起诉。
八、其他(含中介方的权利、义务、服务费及其支付方式，定金、财产抵押担保等上述条款未尽事宜)：
九、本合同有效期限： 年 月 日至 年 月 日。
甲方：________________________
代表人：______________________
年 月 日
乙方：________________________
代表人：______________________
年 月 日
篇17：技术出口合同范本_合同范本
Contract for Equipment Sales and Technology Licensing
Contract No. ____________________
This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).
Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:
Article 1 Definitions
1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.
1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.
1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.
1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.
1.5 “Destination Airport” refers to _____________Airport.
1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.
1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.
1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.
1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.
1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.
1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.
1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.
1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.
1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.
1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.
1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.
1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.
1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.
1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.
Article 2 Scope of the Contract
2.1 The Seller’s Obligation
2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.
2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.
2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.
2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.
2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.
2.2 The Buyer’s Obligation
2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.
2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.
2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.
2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.
2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.
2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.
Article 3 Grant of License
3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.
3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.
3.4 Territory
3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.
3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.
Article 4 Price
4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.
4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).
The breakdown price is as follows:
The price for Equipment is __________(say _______________________ only).
Fee for design is __________(say _______________________ only).
Fee for Technical Documentations is __________(say _______________________ only).
License fee is __________________(Say: _________________ only)
4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).
4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.
4.2.3 The above price is fixed and firm.
4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.
4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.
Article 5 Payment
5.1 Down Payment
Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.
5.2 [Option One: Payment by Sight L/C]
The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).
5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) Bill of Lading in one (1) original and ___ ( ) copies;
(b) Commercial Invoice in one (1) original and ___ ( ) copies;
(c) Packing list in one (1) original and ___ ( ) copies;
(d) Certificate of Origin in one (1) original and ___ ( ) copies;
(e) Insurance Policy in one (1) original and ___ ( ) copies;
5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;
(b)One ( 1 ) copy of commercial invoice.
5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;
b) One (1) copy of Commercial Invoice.
5.2 [Option Two: Payment under a L/G]
The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.
5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.
Article 6 Delivery of Equipment and Technical Documentation
6.1 The Delivery of the Equipment
6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.
6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.
Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.
6.1.3 The port of shipment is ____, while the port of destination is ____.
6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.
6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.
6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:
(a) Contract number
(b) Name of the vessel and loading port
(c) Name of the Equipment shipped
(d) Number and date of Bill of Lading
(e) Total volume
(f) Total gross and net weight
(g) Total number of packages/cases
6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:
(a) Bill of Lading
(b) Commercial Invoice
(c) Packing List
(d) Certificate of Origin
(e) Insurance Policy.
6.2 The Late Delivery of the Equipment
6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:
(a) From the first week to the fourth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per
week
(b) From the fifth week to the eighth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per week
(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of
the value of the delayed portion of the Equipment per week
6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.
6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.
6.3 The Delivery of the Technical Documentation
6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.
6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.
6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.
6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.
Article 7 Packing and Marking
7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.
7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:
(a) Destination
(b) Consignee
(c) Contract number
(d) Shipping mark
(e) Gross/net weight (kg)
(f) Case/ bale number
(g) Dimensions: L x W x H (cm)
7.3 Each package shall contain one (1) copy of packing list.
7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.
7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.
(a) Destination
(b) Consignee
(c) Contract number
(d) Gross/net weight (kg)
(e) Item number
(f) Dimensions: L x W x H (cm)
Article 8 Technical Service and Technical Training
8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.
8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.
8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.
8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.
Article 9 Standards and Inspection
9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.
9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.
9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.
The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.
9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.
In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.
9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.
9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.
If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.
Article 10 Design and Design Liaison
10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.
10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.
10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.
Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance
11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.
11.2 Chief Representatives
11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.
11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.
11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.
11.3 Erection and Test Run
11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.
11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.
11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.
11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.
11.4 Commissioning and Performance Test
11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.
If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.
11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.
11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.
11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.
11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.
11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.
11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.
11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.
11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.
The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.
11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.
11.5 Acceptance
11.5.1 Acceptance shall occur in respect of the Equipment when :
(a) Performance Test has been successfully completed as per the Article 11.4.6.; or
(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or
(c) The Seller has paid the liquidated damages as per Article 11.4.9; or
(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or
(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.
11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.
11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.
11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.
11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.
Article 12 Guarantee and Warranty
12.1 The Seller guarantees that:
(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;
(b) The Technical Documentation shall be complete, clear and correct.
12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.
12.3 Defect of the Equipment
12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.
The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.
12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.
12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.
12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.
12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.
12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:
(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or
(b) Alteration, modification or repair without the Seller’s prior written consent; or
(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or
(d) Normal wear and tear.
12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.
12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.
12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.
12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.
12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.
Article 13 Intellectual Property Right
13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.
13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.
13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.
13.4 Registration of the Contract and Maintenance of Patent
13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.
13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.
13.5 Improvement and Grant-back
13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.
13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.
13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.
Article 14 Confidentiality
14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.
14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.
14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.
14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.
14.5 This Article 14 shall survive the expiration or termination of the Contract.
14.6 The confidential obligation shall not apply to the information which:
A. now or hereafter enters the public domain; or
B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or
C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.
Article 15 Taxes and Duties
15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.
15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.
15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.
15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.
Article 16 Force Majeure
16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.
16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.
16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.
Article 17 Applicable Law and Settlement of Disputes
17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.
17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.
17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.
17.4 The arbitral award shall be final and binding upon both parties.
17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.
Article 18 Effectiveness, Term and Termination of the Contract
(a) The Seller and the Buyer sign the Contract;
(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);
(c) The Seller receives the Down Payment;
(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.
18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.
18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.
18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.
(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.
(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.
(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.
18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party
A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
B. fails to perform its confidentiality obligation under the Contract; or
C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.
18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if
A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or
B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or
C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.
18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,
The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.
All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.
All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.
In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.
The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.
E. Termination of the Contract shall not release either party from its confidential obligations under the Contract
Article 19 Miscellaneous
19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).
19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.
19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.
If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.
19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.
19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.
The Buyer:
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
The Seller :
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.
The Buyer:
The Seller:
By:______________________[Signature]
Name: [printed name]
By:_______________________ [Signature]
Name: [printed name]
Title:
Title:
Appendices
Appendix 1 Specifications and Guarantee Indices (Omitted)
篇18：消防技术咨询合同_合同范本
技术咨询合同是指当事人一方为另一方就特定技术项目提供可行性论证、技术预测、专题技术调查、分析评价报告所订立的合同。以下是第一范文网小编整理的消防技术咨询合同模板，欢迎参考阅读。
消防技术咨询合同模板一
甲方：
乙方：
本合同由甲方和乙方签署，甲方同意接受。乙方同意提供下列条款规定的服务：
一、 服务内容：
消防设备维护保养：
1.1检查消防管道的保压情况，每三月一次。
1.2检查消防喷淋泵、消火栓泵自动，手动及控制箱的工作情况，每三月一次。
1.3每月对烟感、温感报警器，气感及手报抽查1/3。每三月全部检测一次。
1.4检查声光报警器、防排烟机、消防广播工作情况，每三月一次。
1.5喷淋系统末端排水阀排水，每月一次。消火栓检查三月一次。
1.6检查火灾报警控制器的主、备电转换情况及控制的工作情况，每三月一次。
1.7室内消火栓压力检测，消火栓箱内的报警器，水带及其它附件检查。每三月一次。
1.8消防主管部门进行年检时，乙方人员到场，并保证系统工作正常。
1.9遇到突发火灾报警系统故障，甲方应及时通知乙方，乙方需紧急派员排除和维修。对于一般故障，乙方在24小时内到达进行维修。
1.10整个消防系统维保一次结束后，需在一周内递交维护保养记录。
二、 服务要求：
2.1乙方每月到甲方现场作维护保养工作。特别情况甲方发现设备有问题应及时通知乙方，乙方人员接通知后3小时内到进行维护。
2.2平时一切消防设备保证正常工作。
三、 合同总价和付款方式：
本合同全年总价为
3.1每次乙方须先进行一次服务，然后甲方按一年技术服务费用的四分之一付款，即 元。
3.2购买备件、备品及更换另部件的费用，另行按实计算收费。
四、 技术服务质量：
乙方保证所有经验检测和保养的设备在合同期内都能正常发挥功能。如在感应元件的检测范围内发生消防事故时，感应元件没有动作，如：不报警，不喷水等，而由此造成的一切损失由乙方负责。
五、 合同终止：
任何一方如需终止本合同，应提前一个月通知对方。
六、 违约责任：
如乙方在收到甲方通知未能在规定时间内到达甲方所在地，每次应向甲方支付100元人民币以作为乙方的违约金，并承担因此导致的相关责任和损失。
七、 仲裁：
由本合同引起或执行本合同时所引起的所有争议应由双方采取友好协商后解决。如协商无法解决，应提交当地法院进行裁决。
八、 其他事项：
8.1乙方在维护保养时应遵守甲方的各项制度，维持工作环境整洁。如有违反，视情节严重程度，处以经济罚款。
8.2在维护保养时间，甲方应提供乙方工作方便。
本合同一式二份，经双方签字生效。
甲方： 乙方：
法人代表： 法人代表：
地址： 地址：
电话： 电话：
签订日期： 年 月 日
2.3紧急联系：
消防技术咨询合同模板二
发包方： (以下简称甲方) 承包方：上海南晓消防工程设备有限公司 (以下简称乙方) 经甲乙双方协定，就甲方消防系统的维护保养事宜达成如下协议：
一、 甲方的消防系统包括： 系统、 系统、 系统、和 系统，在 年 月 日至 年 月 日期间由乙方负责维护保养，保养期为 年。
二、 保养期责任细则：
(一)、本合同签字生效后，乙方在日内完成对消防系统的全面检查，检修。
(二)、本合同生效后一年内，乙方免费对本消防系统进行4次全面例行检查、维护，分别在每季度的第一个月进行。
(三)、遇到突发火灾报警系统故障，甲方应及时通知乙方，乙方须紧急派员排除和维修。对于一般故障，乙方人员在24小时内到达进行维修。
(四)、消防主管部门进行年检时，乙方人员到场，并保证系统工作正常。
(五)、甲方应为乙方工作人员现场工作提供方便及相应安全措施，乙方工作人员应遵守甲方的规章制度。
(六)、乙方在提供技术服务时，不负责任何间接责任或由此引起的其它责任(如间接损坏、损失及营业利益之损失)。
(七)、乙方维修保养范围不包括人为损坏、更改装修而产生的损坏。
(八)、每次维护保养后，甲方有关负责人需在维修记录表上签字，一式 份，双方备案。
三、 费用及付款方式：
(一)、本合同总价为： 元整。
(二)、在完成对消防系统每季度一次的全面检查、测试及维修后，甲方预付给乙方合同总价的 %，即： 元整。以此按每季度类推。
四、 其它：
(一)、本合同以签字日起生效，有效期为 年。
(二)、本合同一式 份，甲、乙双方各执 份。
(三)、合同中未尽事宜，通过友好协商解决。
甲方： 乙方：上海南晓消防工程设备有限公司 法人代表： 法人代表：
联系人： 联系人：
地址： 地址：
电话： 电话：
传真： 传真：
消防技术咨询合同模板三
委托方(甲方)：
住 所 地：
法定代表人：
项目联系人：
联系方式
通讯地址：
电 话： 传 真
电子信箱： 邮 编
受托方 (乙方)： 公安部沈阳消防研究所
住 所 地：
法 定 代 表 人：
项 目 联 系 人：
联系方式：
通讯地址： 邮 编：
电 话： 传 真：
电子信箱：
本合同甲方委托乙方就新产品进行新产品性能测试分析 的专项技术服务，并支付相应的技术服务报酬。双方经过平等协商，在真实、充分地表达各自意愿的基础上，根据《中华人民共和国合同法》的规定，达成如下协议，并由双方共同恪守。
第一条 甲方委托乙方进行服务的内容如下：
1.技术服务的目标： 完成消防电气控制装置等新产品性能测试分析。
2.技术服务的内容： 对上述产品进行报警性能、监控报警、绝缘电阻等项目的分析。
3术报告。
第二条 乙方应按以下要求完成技术服务工作：
1.技术服务地点： ;
2.技术服务期限： 3.;
4.
5.
第三条 为保证乙方有效进行技术服务工作，甲方应当向乙方提供下列工作
条件和协作事项：
1.提供技术资料：
(1)
(2)
(3)
(4)。
2.提供工作条件：
(1) ;
(2)
3.其他：
4.甲方向乙方及时提交技术资料和样品 。
第四条 甲方向乙方支付技术服务报酬及支付方式：
1.技术服务费总额为
2.技术服务费由甲方(一次或分期)支付乙方。具体
支付方式和时间如下：
(1);
(2;
乙方开户银行名称、地址和帐号为：
开户银行： 地址： 帐号：
第五条 双方确定因履行本合同应遵守的保密义务如下：
甲方： 1.保密内容(包括技术信息和经营信息)： 。
2.涉密人员范围：。
3.保密期限：。
4.泄密责任：。
乙方：1.保密内容(包括技术信息和经营信息)： 。
2.涉密人员范围：。
3.保密期限：。
4.泄密责任：。
第六条 本合同的变更必须由双方协商一致，并以书面形式确定。但有下列
情形之一的，一方可以向另一方提出变更合同权利与义务的请求，另一方应当在 日内予以答复;逾期未予答复的，视为同意：
第七条 双方确定以下标准和方式对乙方的技术服务工作成果进行验收：
1.乙方完成技术服务工作的形式：。
2.技术服务工作成果的验收标准：
3.技术服务工作成果的验收方法：。
4.验收的时间和地点：
第八条 双方确定：
1.在本合同有效期内，甲方利用乙提交的技术服务工作成果所完成的新的技术成果，归 无 (甲、双)方所有。
2.在本合同有效期内，乙方利用甲方提供的技术资料和工作条件完成的新的技术成果，归 无 (乙、双)方所有。
第九条 双方确定，按以下约定承担各自的违约责任：
1. 甲 方违反本合同第 3、4、5、7、条约定，应当 按成交额的50%给乙方 (支付违约金或损失赔偿额的计算方法)。
2. 乙 方违反本合同第 2、5、7、 条约定，应当 按成交额的50%给甲方 (支付违约金或损失赔偿额的计算方法)。
3. 无 方违反本合同第 条约定，应当 无 (支付违约金或损失赔偿额的计算方法)。
4. 无 方违反本合同第 条约定，应当(支付违约金或损失赔偿额的计算方法)。
第十条 双方确定，在本合同有效期内，甲方指定 为甲方项目联系人，乙方指定 为乙方项目联系人。项目联系人承担发下责任： 1.
2.
3.
一方变更项目联系人时，应当及时以书面形式通知另一方。未及时通知并影响本合同履行或造成损失的，应承担相应的责任。
第十一条 双方确定，出现下列情形，致使本合同的履行成为不必要或不能的，可以解除本合同：
1.发生不可抗力;
2.
第十二条 双方因履行本合同而发生争议，应协商、调解解决。协商、调解不成的，确定按以下第 1 种方式处理：
1.提交仲裁委员会仲裁;
2.依法向人民法院起诉。
第十三条 双方确定：本合同及相关附件所涉及的有关名词和技术术语，其定义和解释如下：
第十四条 与履行本合同有关的下列技术文件，经双方以
方式确认后，为本合同的组成部分。
1.技术背景资料： ;
2.可行性论证报告： ;
3.技术评价报告： ;
4.技术标准和规范： ;
5.原始设计和工艺文件： ;
6.其他： 。
第十五条 双方约定本合同其他相关事项为： 无 。
第十六条 本合同一式 三 份，具有同等法律效力。
第十七条 本合同经双方签字盖章后生效。
甲方： (盖章)
法定代表人/委托代理人： (签名)
年 月 日
乙方： 公安部沈阳消防研究所 (盖章)
法定代表人/委托代理人： (签名)
年 月 日
篇19：技术承包合同书
__县__乡__村__组__(以下简称甲方)：
__县__乡__村__村民(以下简称乙方)：
为了调动农民发展农副业生产的积极性，增加集体和个人收入，提高经济效益，为城乡市场和出口提供更多的农副产品，根据中央(83)、(84)一号文件的精神，经村民大会讨论同意和甲乙双方充分协商，特订立本合同，以便双方共同遵守。
第一条、承包副业的项目、内容_______ 第二条、承包期限承包期为__年，从__年__月__日起，至__年__月__日止。
第三条、甲方的权利义务
1.甲方有权对乙方承包的特定副业项目生产经营实行监督检查。
2.甲方必须合理分配给乙方国家下拨用于发展副业生产的化肥、农药、专项贷款和其它物资，合理安排乙方接受业务技术部门的培训。
3.甲方应该定期公布集体的财务帐目和副业生产提成费用的支出情况，接受乙方的财务监督检查。
第四条、乙方的权利义务
1.乙方在承包期内，必须向甲方上交承包款__元(或上交__公斤__，__公斤__)其中，一九__年__月__日以前上交承包款__元(或上交__公斤__，__公斤__);一九__年__月__日以前上交承包款__元(或上交__公斤，__公斤__)。(或：按乙方的收入比例分成，甲方得__成，乙方得__成。)
2.对以上交承包款为承包形式者，乙方有权根据市场需求，自主调整生产经营项目;对以特定副业项目为承包形式者，乙方在完成承包项目规定的任务之后，有权自主调整经营项目。乙方在不违背国家政策、法律的前提下，有权自主决定生产和经营活动。
3.乙方有权获得国家下拨的用于发展副业生产的公肥、农药，专项贷款和其它物资，有权接受发展副业的生产技术培训。
第五条、双方的违约责任
1.甲方如不按时、按量分配给乙方国家下拨用于发展副业生产的公肥、农药、专项贷款指标和其它物资，应按其价值的__%，向乙方偿付违约金。
2.乙方如不按时，按量向甲方上交承包款(或特定的农副产品)，应按其价值的__%，向甲方偿付违约金。
第六条、不可抗力在合同执行期间，如遇不可抗力的自然灾害，造成乙方生产、经营的家副业产品损失，经调查证实后，甲方应根据实际情况，减少或免除乙方承担的义务。
第七条、其它本合同自承包开始之日起生效，合同期满自行失效。合同期满后。甲乙双方如愿意继续承包，应重新订立合同。合同执行期间如乙方去世，其家庭成员有承包继承权。合同执行中，甲乙双方不得随意更改或解除合同。合同亦不因甲方代表人的变更而变更。合同中如有未尽事宜，必须由甲乙双方共同协商，作出补充规定，补充规定与本合同具有同等效力。
本合同正本一式二份，甲乙双方各执一份;合同副本一式__份，交村委会、(如经公证或鉴证，则应送公证或鉴证机关)各留存一份。
甲方：__县__乡__村__组__(公章) 代表人：__(盖章)
乙方：__村民__(盖章) __年__月__日订
篇20：图书馆系统技术支持服务协议书_合同范本
一、协议双方
甲方：______
乙方：______
二、协议内容
经甲乙双方友好协商，应甲方要求乙方提供以下服务：
1.协助甲方进行图书馆系统维护并且建立系统维护记录。
2.上门进行软件的维护，及时发现问题并解决问题。
3.根据甲方的需要，修改系统的配置文件、帐户、打印输出格式、统计报表输出格式等。
4.根据甲方软件使用情况及设备情况制定科学的数据备份方案和方法，并协助甲方进行日常数据备份。
5.协助同一版本软件的升级工作。
6.根据甲方的要求，制作图书馆的主页。
7.乙方负责甲方操作员现场培训。
8.甲方免费参加乙方在____或____组织的操作员培训。
三、费用
其一年技术支持服务费用为所购软件的_____％。
四、服务方式
上门及电话服务，二十四小时内响应。
五、服务期限
自_____年__月__日至____年__月__日，有效期为____年。
六、付款方式
1.自签约之日起，甲方向乙方支付技术支持服务费。
2.乙方收到用户支付的技术支持服务费后，即开始为甲方提供服务。
七、违约责任
按经济法，合同双方友好协商解决。
八、本协议一式二份，有效期为_____年，甲乙双方各执一份，自签订之日起即生效，双方均应严格遵守。
甲方（盖章）：_______ 乙方（盖章）：_______
代表（签字）：_______ 代表（签字）：_________
_____年__月__日 _____年__月__日
签订地点：______ 签订地点：______