信息技术评课要点（优秀20篇）

甲方： 乙方：

甲方聘用乙方为 现场技术负责人及施工员 。

一、劳动合同期限

(一)合同期。

1.以完成一定工作任务为期限：从 __________ 至 _____ 工作任务完成时止。

(二)试用期

1.试用期从 ______________________________________ 年月 日起至 年月 日止。

二、 乙方的工作任务或职责是

1、作为长驻工地代表，在保证工程质量前提下抓好生产进度，对施工质量负责。

2、在项目部经理授权下协调现场有关施工单位的施工问题。

3、遵守施工材料质量制度，严格监督控制进场材料的质量、型号和规格，坚决杜绝不合格材料进入施工现场，对材料管理引起的质量问题负责。

4、参与图纸会审和技术交底，配合基建工程部经理安排好每天的生产工作，对班组成员进行全面的技术交底。

5、组织项目部技术人员编制单位工程的施工组织设计与施工方案，并进行审批。

6、按规范及标准组织施工，保证进度及施工质量和施工安全。

7、配合基建工程部经理组织工程验收和分项工程质量评定。对因设计或其它变 更引起的工程量的增减和工期变更进行签证，并及时调整部署。

8、每周填写上报各种报表，并作好人员的考勤及施工工作记录填写施工日志。

9、组织好施工过程的各种原始记录及统计工作，保证各种原始资料的完整性、 准确性和可追溯性。

10、填写施工进度日志、质量报表、工程进度表、施工过程的各种原始记录、施 工责任人签到表、工程领料单等进行核对、整理、收集，保证其完整性、准确性 和可追溯性。

11、完成领导交办的其他任务。

三、劳动报酬

(1)元/月，试用期满后工资为 乙方试用期工资为元/月。甲 方承诺，乙方如按时完成施工进度、质量、安全防范，均能达标。将额外获得甲方提供元奖金。

(2) 甲方每月—日发放当月工资的60% 元。

四、其他

双方均同意以上条款，未尽事宜，双方另行商定，与本合同具同等效力。

甲方：乙方:

年月曰

一、指导思想

贯彻落实《国务院关于基础教育改革与发展的决定》，全面推进素质教育，培养四有一代新人。根据学校工作计划和中学信息技术《课程指导意见》以及学生的具体情况，明确中学信息技术课程的任务：培养学生对信息技术的兴趣和意识，让学生了解或掌握信息技术基本知识和技能，使学生具有获取信息、传输信息、处理信息和应用信息技术手段的能力，形成良好的信息技术素养，为他们适应信息社会的学习、工作和生活打下必要的基础。

二、教学目标

1、培养学生对计算机的感性认识，了解信息技术在日常生活中的应用，培养学生学习、使用计算机的兴趣和意识。

2、初步掌握网页制作(frontpage20xx)的一些基本操作，学会制作简单的网页。

3、初步学会使用计算机获取和处理文字、图象、声音、视频的技能。能熟练掌握其中的一些主要功能及对多媒体技术的应用。

4、养成良好的计算机使用习惯。

5、通过学习，使学生了解并掌握一些学习方法和技巧，培养学生的学习积极性和主动性，鼓励学生之间相互交流，进行某些创新设计。

三、情况分析

(1)学生基本情况：

本计划针对八年级全体学生，通过上年的学习，学生对办公软件例如powerpoint、计算机基础及应用有一定了解，但是由于每一学期信息技术课时比较少，每周只有一节课，学生的遗忘性大，大多数学生学后没有注意巩固，学生掌握的情况不是很理想，参差不齐。有条件的学生家中有电脑或父母单位有电脑，上机时间相对多一些，操作较熟练，有大部分学生纯粹是上课时间听课，课后就没有练习巩固的机会，所以，这一部分学生对所学知识遗忘较大，操作生疏;

学生对本学科的学习积极性还是比较高，因为信息技术课并不像语文、数学那么枯燥、单调，也不像历史、政治需要死记硬背。相对来说学生觉得比较新鲜。但是这又存在一个问题就是学生感兴趣的并不是学习，而是打游戏、上网聊天。所以，学生对计算机的认识还有待提高。要进一步对他们进行正确的引导。

(2)教材分析：

本学期教材是使用海南省中小学《信息技术》编写组出版的八年级信息技术(下册)，内容包括：网页制作、用计算机处理多媒体信息、图像处理等，其中网页制作占教材的50%，可见制作网页是本学期教学的重点，也是难点。

四、教学内容

教学内容包括：第一单元《大家一起来运动》、第二单元《感受精彩艺术节》、第三单元《设计班级网站》、第四单元《制作班级网站》

五、具体措施

本期主要采取课堂教师授课方式、学生自学方式和动手操作三种方式进行学习，适当进行一些小竞赛及课堂评价的方式进行教学。其中学生自学和动手是最主要的。

八年级的信息技术教学，以计算机基础知识和基本技能训练为主。在教学过程中要加强对学生自学能力、信息处理能力和创造力的培养，强调从信息技术的知识与技能，过程与方法，情感、态度与价值观等方面培养学生的信息素养。主要有：

1、借助范例，从兴趣出发，让学生在动手实践中理解基本原理，掌握基本知识，培养基本技能。利用各种和现实有密切联系的软件进行教学，并尽可能多的安排学生用所学知识进行创作的机会，这样既可提高学习兴趣，又利于培养学生的创新、自学能力和信息处理能力，有利于促进学生的主动发展。

2、通过“活动”教学方式，培养学生获取、加工、管理、表达与交流信息的能力。

3、将评价作为促进教与学的一种手段融入教学过程中。

不仅要关注学生的学习成绩，而且要发现和发展学生多方面的潜能，了解学生发展中的要求，帮助学生认识自我，建立自信。发挥评价的教育功能，促进学生在原有水平上的发展。对学生学习进行多元化评价，激励学生发展特长，在使学生学会信息技术基础知识的同时，培养和发展学生的创新精神和实践能力，以及获取知识的能力。

六、教学进度表(附表)

第一单元《大家一起来运动》………………………………4课时

第二单元《感受精彩艺术节》………………………………4课时

第三单元《设计班级网站》…………………………………3课时

第四单元《制作班级网站》…………………………………5课时

随着信息技术的迅速发展，人类正在进入信息社会，作为教师，应该与时俱进，要适应新时代教育发展的要求，否则我们会成为社会的淘汰品，所以我必须自觉参加中小学(幼儿园)教师信息技术应用能力培训学习。为了能让本次培训学习起到真正的实效，真正让自己获得一定的进步，我制定了如下研修方案。

一、指导思想

通过专家教授的讲解引领，不断更新自己的观念，促使自己向专业化方向发展，从而适用“新教育”“新技术”“新课堂”的要求。

二、研修目标

1、提高自己对信息技术应用在及各科教学中应用的理解能力和操作能力。

2、能结合有关信息技术应用能力，针对语文及各科教学不断和总结，提高自身的专业发展能力。

3、转变固有的教育观念，与新时期的教育观念保持一致。

三、研修方式

1、认真聆听专家们的教授，虚心向专家及同行请教

在学习中对专家讲解不明白问题和教学中的困惑，及时上网查询并向同行请教，努力向寻求专家帮助解决。积极参与研修班的各项研讨活动，努力向各位学员交流学习，拿出自己的问题请教各位学员，与各位学员共同探讨。

2、在学习中总结、反思，在总结、反思中提升

加强业务学习与进修，主动关心国内外及周围教育信息和专业理论，每周至少抽出几个小时，并通过多种途径提升自己的思想和技能水平，如各种信息技术教学相关的刊物、多媒体技术、观摩、听讲座，上网等，汲取信息技术的新知识、新技能。⑴积极利用信息技术手段辅助教学，充分利用网络优势，积极参与在线研讨。⑵在多媒体教学环境中，合理利用软件、数字教育资源，优化课堂教学，提高自己的课堂效率。⑶利用网络教学平台，有效开展自主、合作、探究等学习活动，转变学生的学习方式，培养学生的创新意识和综合能力。⑷利用教师网络研修社区，养成网络学习习惯，树立终身学习的理念，为自身的可持续发展奠定基础。

3、积极学习

俗话说“长到老，学到老”，我决心珍惜这次培训提升机会，认真遵守培训能力提升工程的各项要求，每天挤出时间上网学习，专心听讲，认真聆听专家，并做好必要的记录。无论专家报告何种风格，都坚持在最快的是时间内调整思路，融入专家讲解思路，内化成自身的知识，弥补自己专业知识的不足。积极参加教育科研能力研修，树立教研科研意识，把研修和教育科研紧密结合，并拟写质量较高的教学反思、教学或者教学设计与同事交流，把问题作为课题研究，积极参加教育系统组织的教科研成果征集活动。

三、具体

1、上课期间每天利用1至2小时登陆网络研修平台(假期可以每天适当延长3至4小时)，认真完成培训期间各项任务及作业。

2、认真聆听专家们视频讲座，做好笔记，并把理论运用于实践，提高自己业务水平。

3、培训期间多与同行研讨交流，取长补短，不断总结和反思，力争让信息技术更好的服务我们的教学。

4、多阅读信息技术方面的书籍，掌握教学中常用软件的操作流程和方法，提升自己的信息技术应用能力水平。

5、多实践，多反思，多总结，积极把学习遇到的共性问题上升为课题，并对其进行研究总结和把经验进行交流、分享。

总之，我决心不断学习，不断更新，丰富自己的积淀，充盈自己的底气，增强自己的理论底蕴，提高教育教学能力，结合教学实际，努力学习信息技术，并学以致用!

“网络研修”作为一种新的促进教师专业成长的重要方式和有效策略，已经伴随着国培的春风走近了我们的身边，经过在学习平台上的自我测评，我发现自已在信息技术应用能力上还存在很多需要学习的地方，下面就结合诊断测评的结果制定出我个人的研修学习计划：

一、指导思想：

按照“国培计划中小学教师信息技术应用能力提升培训”总体要求。结合个人在平台诊断测评的结果显示，以自身发展为目的，以将信息应用技术服务教学为理念。

二、研修目标：

1、规范信息技术课堂教学，优化自已的备课活动，使自己由学习型向研究型转变，进而使自己成为新课程实施及推广的引领者。全面提高信息技术的使用能力及素养。努力探索和研究适合学生特点，能促进学生全面发展的教学方法，推动教学质量稳步提升。

2、积极转变信息技术教学态度、教学方式，使信息教学有效利用到教学当中。充分发挥信息技术的便捷作用，不断提升PPT、FLAS等教学软件的使用能力。积极拓展新的教学手段，全面实现教学手段的现代化，做到教学的与时俱进。

3、通过课程学习与研讨交流，不断拓宽视野，紧跟时代脉搏。注重在工作实际中发挥教师间的协同作用，达到资源共享，为打造高效课堂贡献力量。同时发挥个人作用，引领全校信息技术使用能力，使现代化教学手段能最大限度地服务全校，不断提升我校教学的整体水平。

三、研修要求：

认真参加网络平台上的各项学习，按时完成作业，积极参与讨论交流，积极配合工作坊指导教师工作，争取出色完成学习任务，以获得优秀学员荣誉。同时积极发挥在本校学科的带头作用，督促教研组其他教师完成学习。

这次现代信息技术教师培训，为提高教师的自身水平提供了良好的平台，不管是现在还是将来，我都要不断地给自己“充电”，加强基本功的新修炼，才能不断的开拓进取，勇于创新，才不至于被社会淘汰。所以，我对这次培训很满意。

通过这次培训，使我对今后的教育教学方法产生极大影响，感受到教学工作的艰巨。同时对我各方面的能力有了很大提高，特别是对信息技术的综合运用能力，现在已不只停留在课件的制作上。使我认识到做为一名教师应积极主动吸纳当今最新的技术，并致力于把它们应用于课堂内的教与学活动中，在第二天的培训中,我深深的体会到：

1.教师具备良好的信息素养是终生学习、不断完善自身的需要。

信息素养是终生学习者具有的特征。在信息社会，一名高素质的教师应具有现代化的教育思想、教学观念，掌握现代化的教学方法和教学手段，熟练运用信息工具(网络、电脑)对信息资源进行有效的收集、组织、运用;通过网络与学生家长或监护人进行交流，在潜移默化的教育环境中培养学生的信息意识。这些素质的养成就要求教师不断地学习，才能满足现代化教学的需要;信息素养成了终生学习的必备素质之一，如果教师没有良好的信息素养，就不能成为一名满足现代教学需要的高素质的教师。

2.教师具备良好的信息素养.是教育系统本身的需要。

在迅猛发展的信息社会，信息日益成为社会各领域中最活跃、最具有决定意义的因素。在教育系统中，教育信息则成为最活跃的因素，成为连接教育系统各要素的一条主线;而教育系统的一项主要职能就是由教育者把教育信息传递给受教育者。因为从信息论的角度看，教学过程是一个教育者(主要是教师)对教育信息的整理、加工和传播的过程。教师是这一过程中主要的信源和传输者，在教育信息的准备和传递等方面起着举足轻重的作用。因此，教育系统本身要求教师具备一定的信息素养。

3.观念上的更新

本次信息技术培训虽然只有短短二天的时间，但是每一天的培训都使我在观念上有一个更新。计算机的使用在往常对我而言就是一个进行文本操作的工具而已，本来我平时也不太注意对计算机技能的学习，总是有了问题就打电话求助，从没有想过要自己去掌握这样的技术。

4.细节上的渗透

本次培训中，授课教师注重细节上的教学渗透，他们不仅教给我技巧，更在无形中用自己的言行来引导大家，在一些细节的讲解上十分细致，恰当地渗透一些旧知识，使不同程度的老师都能得到提高。

通过二天的培训虽然短暂，但使我的受益不浅，其感触非一一能言尽。在将来的工作岗位上，我一定扎实工作，努力学习，把用所学到的教育技术知识更好地应用教研教改中，做一名对学生负责，对学校负责，对社会负责的优秀教师。最后，我想说，在紧张而繁忙的工作之余再培训会收获些须的欣慰吧!我仍会继续学习各种关于信息技术的知识、持之以恒，不懈的努力优化课堂教学，培养新时代所需要的具有高信息技能的新兴人才。这将是我以后的最终目标。

软件技术支持合同

甲方： 项目联系人： 地址： 邮编： 电话： 邮件：

乙方： 项目负责人:

地址： 邮编：

电话： 邮件：

上述甲、乙双方，经友好协商，就甲方委托乙方进行软件技术支持事宜达成以下协议。双方

申明，双方都已理解并认可了本合同的所有内容，同意承担各自应承担的权利和义务，忠实

地履行本合同。

第一条 甲方委托乙方为甲方网站进行有关的技术支持的项目内容。

第二条 乙方承诺在履行合同时不会进行有损甲方形象、声誉等的行为。

第三条 甲方网站资料（如文章、图片等资料）由甲方自行上传。

第四条 本合同网站项目建设完成后，甲方享有委托乙方创作的全部网页（包含文字、图画

及其组合）的版权；网站项目中相关程序、文件源码的版权属乙方所有，但乙方授予甲方对

该等程序、文件源码的使用权。未经乙方许可，甲方不得公布文件源码，不得复制、传播、

出售或者许可他人使用本合同标的作品及其程序、源码等。乙方可以在业务范围内使用以据

本合同委托创作的作品。

第五条 双方当事人应当保守在履行本合同过程中获知的对方商业秘密。

第六条 任何一方违反本合同，给对方造成损失的，还应赔偿损失。

第七条 双方当事人对本合同的订立、解释、履行、效力等发生争议的，应友好协商解决；

协商不成的，双方同意向乙方主要营业地（福州市台江区）的人民法院起诉。

第八条 本合同经双方授权代表签字并盖章，自签订日起生效。

第九条 本合同一式两份，双方当事人各执一份，具有同等法律效力。

技术支持内容、协议金额。

1.项目内容：长乐消防大队软件技术支持服务

2.协议金额：

软件技术支持服务费用： 整， 元；

甲方（盖章） 乙方（盖章）

代表签字 代表签字

日期： 日期：

一转眼，两个月的培训就要结束了，还真有点舍不得。在这两个月里，虽然在紧张的备课、上课、批改作业之余，还得趴在电脑前认真地学习专家引领性的视频或文本资料，或是完成一些培训的作业，几乎可以说是忙得焦头烂额，但是回想起本次培训中自己收获与进步，觉得累得值得，因而又对这次培训倍感珍惜。

首先，必修课的学习让我对信息技术的认识更进了一步，信息技术应用能力也有了很大提高。以前听说过微课程，以为微课程也就是课堂教学中的一小段，通过培训才意识到原来自己竟是井底之蛙。现在我不仅明白了什么叫微课程，知道了如何设计和制作微课程，更明白了微课程在未来学习中的重要性，也激起了我认真学习和培训的热情，以使自己能跟上时代的步伐，在不远的将来能成为一名合格的教师。除以之外，我还学到了图片、音频、视频的一些使用技巧，学会了制作精美、实用的多媒体课件。并尝试运用所学到的知识自己设计制作多媒体课件，教学效果良好。

其次，进一步明确了信息技术在实际的教学过程中如何运用。比如何时使用，以何种方式呈现，才能更好地激发学生的学习兴趣、提高教学效果等。清楚了如何运用信息技术导入新课能第三，起到事半功倍的效果;清楚了信息技术支持的探究学习任务如何设计才能行之有效，清楚了多种形式的媒体各在什么情况下才能发挥各自最大的优越性，为课堂教学锦上添花……通过观看优秀课例，使我信息技术在课堂中的运用理解得更深刻。

第三，明白了教师具备良好的信息素养.是教育系统本身的需要。在迅猛发展的信息社会，信息日益成为社会各领域中最活跃、最具有决定意义的因素。在教育系统中，教育信息则成为最活跃的因素，成为连接教育系统各要素的一条主线;而教育系统的一项主要职能就是由教育者把教育信息传递给受教育者。因为从信息论的角度看，教学过程是一个教育者(主要是教师)对教育信息的整理、加工和传播的过程。教师是这一过程中主要的信源和传输者，在教育信息的准备和传递等方面起着举足轻重的作用。因此，教育系统本身要求教师具备一定的信息素养。

最后，在辅导教师的帮助下，在和同组教师的互研讨中不断成长进步。组内教师对我提交的教学设计给予了真诚的评价和帮助，他们为我提出了中肯的意见，使我能不断完善进步，在和同组教师的互助研讨中，我学到了很多解决教学中一些实际问题的良好办法，可谓收获颇丰。

总之，通过这次培训，我真正读透了信息技术对课堂教学的重要性，了解了一些信息化教学环境应用过程中的常见问题及对策。既然参加了培训学习，在今后的教学中，我就要把学习的内容和教育教学实践相结合，力求能够让信息技术真正为教育教学服务。

1、加强教学管理和研究。加强教学常规建设，抓好教学“六项”流程。特别注意提高教师的课堂教学效果，要以卓有成效的听课、评课来促进教风、学风建设。

2、加强学校上机课的管理，以切实的措施管理好学生的上机，以进一步增强学生的上机动手能力。进一步规范上机课的备课。

3、积极引导教师参加学校及县以上的各种活动和比赛，并争取通过一些活动切实提高教师的各方面的水平。努力调动组内各教师参与各种活动通过活动提高教师的自身水平。

4、积极提高教师的教学科研水平，加强校内课题的审报工作和管理工作，积极组织教师参预学校的课题研究工作。

5、加紧协助教务科建立学生的电子档案工作，开发一个适合于我们学校的内部网站。以促进学校管理的信息化。

6、高中年级加强晚自习时间的有效利用，要让学生真正训练出效果，训练出水平。

主要工作安排:

周次 教学工作要点

1 开学常规工作检查; 各老师拟定个人发展规划;教研组开学工作安排。

2 学习教学常规，相同科目统一制定教学计划

3 组织全组教师进行业务学习。

4 对上学期就教学进行分析，针对出现问题进行讨论并给出相应整改措施;

5 教学常规检查。

6 老师公开课，全组教师进行听课评课活动。

7 教学常规检查。同一科目集中备课一次

8 教学常规检查

9 期中考试出卷要求，期中考试复习要求。

10 期中考试，并要求做好考试后的考试总结与教学整改。

11 公开课，全组教师进行听课评课活动。

12 公开课，全组教师进行听课评课活动。

13 教学常规检查

14 公开课，全组教师进行听课评课活动。

15 公开课，全组教师进行听课评课活动。

16 检查教学进度，备课笔记，作业批改情况等。

17 高二技术会考。

18 布置期末工作。

19 期末考试;教研组例会，本学期教研组教学等情况分析。

尊敬的领导：

本人严格遵守学校的各项规章制度，不迟到、不早退、有事主动请假。在工作中，尊敬领导、团结同事，能正确处理好与领导同事之间的关系。平时，勤俭节约、任劳任怨、对人真诚、热爱学生、人际关系和谐融洽，从不闹无原则的纠纷，处处以一名人民教师的标准来规范自己的言行，毫不松懈地培养自己的综合素质和能力。

在工作中我享受到收获喜悦，也在工作中发现一些存在的问题。我所享有的收获我会用于下个学期的工作中，我所碰到的问题我要认真思考想办法解决。我将从以下几方面汇报我的工作：

一、教学方面

(1)积极开展教研活动，努力搞好课改工作。严格按照学校要求，积极学习《新课程标准》等内容，提高教改意识，认识教改意义。积极探讨、交流信息技术课教学目标、方法和教学过程设计。努力培养学生信息素养，提高学生获取、处理信息能力。

(2)做到期初有计划，有教学进度，使教学工作能有条不紊地顺利进行下去。虽然其中出现一些突发事件，但由于教学计划安排的比较好，所以并没有给工作带来影响，反而在一定程度上有利于教学工作的进行，使得大量理论知识得于传授给学生。

(3)按照学校工作管理规定，认真备好课，备好教案，努力上好每一节课。一周十二课时，从未丢过一节课，因为这对于学生来讲是的很重要的一节课;曾有老师笑称，我们啊没有一个人敢占你的课，学生还不反了啊。除了备好课、写好教案外，我还要查阅各种资料、寻找好的教学资源、教学课件，学习、提炼、再加工为我所用。

(4)在教学之余，我也注重自身发展进步。除了听课、评课、参加教研组教研活动外，我还注意到要自学。从思想上，时时刻刻提醒自己、自我反思、自我提高思想境界;从行动上，积极参加国家、省市举办的各种形式的培训、学习，利用一切可利用时间补充信息技术知识、提高自身信息技术素养、教学技能等，在生活上注意形象，为人师表。

二、综合素质评价工作

作为教师，教学工作是主要的，但除了教学工作外，我还承担着学校学生综合素质评价工作。每次评价初都要对学生、教师进行培训。指导学生、教师顺利进行综合素质评价。在综合素质评价进行的过程中，每天都要牺牲休息时间，陪着学生、教师进行评价，从旁指导，提高了综合素质评价的进度、效率。

三、学籍管理工作

本学期开始，学籍管理工作走入正规，开始电子管理，对班主任进行培训，班任录入完电子文档之后，帮忙校正，改错。很快的完成了上级布置的学籍管理工作。

四、微机室管理工作

微机室管理工作相对于教学来说也是重要的。由于信息技术教材每年都在变，使用的软件不同，学校的机器使用频率高，老化，为了上课效果更好，每学期都要重新做一次系统。家里的电脑，做一次系统只要二十几分钟就能做完，而学校的机器要一个上午才能做完，再传送到每一台机器上，基本就是一天。

五、兴趣小组

本学期继续组织信息技术兴趣小组，对学生进行特殊辅导。每周利用休息时间为学生进行辅导，内容涉及电脑基础知识、office20__办公软件、flash动画制作等。学生的操作能力明显提升。对于信息技术的学习兴趣越来越浓厚。为更好地进行学科教学打下了坚实地基础。

我深深感到，信息技术教育教学工作只要立足实际，认真分析和研究好教材、大纲，研究好学生，争取学校领导、师生的支持，就能创造性地搞好信息技术的教学工作，就能使我们的工作有所开拓，有所进取。信息技术教育之路任重而道远，我将一如既往地深入研究为我校信息技术发展作出应有的贡献。

学生家庭基本没有计算机，接触计算机的时间只有在学校的一星期45分钟，操作时间客观上较少，计算机基础知识，基本技能不平衡。大部分学生学习兴趣较浓，上课能用心探索，主动求知。

现有差生状况如下:

各班都有部分学生因缺少操作机会，导致一些计算机基本操作都不熟练。

针对各年级的不同状况，务必采取不同的教学方法，个性在培优辅差上要多动脑子，充分挖掘学生的潜力，平时的教学中，应着重在实、广、新上下功夫，充分调动学生的学习用心性。

教材解析

七年级信息技术教材改版了，编者们根据《中小学信息技术课程指导纲要》，并在资料编排上注重中小学教学资料与高中教学资料的衔接。每一单元知识都是以任务为核心，以活动为主线，透过多元化主题活动等方式培养学生信息素养，让学生在主题活动中自主、写作、探究学习，强化应用与实践的潜力。

教材在以往的教学资料上有很大的跨度和突破。在注重信息技术基础理论的夯实之外，又注重了信息资料的应用性和时代性。例如教

材“第三章树立社会主义荣辱观”，即以学科技术为中心，又坚固社会时代气息，树立当代学生人生坐标。

教师依据教材的资料，有更多灵活设计主题的空间，拓展教材，超越学科教材的领域会更大，能够把各个学科的资料巧妙融合在信息技术主题教学当中，完成学科间的知识的跨越，实现学科整合。

目的要求

提升学生信息技术素养，关照全体，强调问题的解决，加强协作交流和探究学习，注重学习过程的评价。

教学措施

以网络环境为学习平台，让学生自主探究学习。注重实践，灵活设计主题。

快乐学习、激发情趣是学生学习创造之源。

课时安排(16课时)

第一单元走进信息世界(3课时)

第一课无处不在的信息

第二课蓬勃发展的信息技术

第三课信息安全

第二单元神奇的计算机(8课时)

第四课计算机系统

第五课走进windows世界

第六课留下完美的图片

第七课在计算机上写字

第八课让音乐随时随地伴你你左右

第九课制作我的配乐诗朗诵

第十课综合上机

第十一课阶段检测

第三单元树立社会主义荣辱观(3课时)

第十二课“八荣八耻”正气歌

第十三课我的社会主义荣辱观

第十四课让我的作品跃然纸上

第十五课中学生传统道德礼仪调查

综合实践建立电子报刊(1课时)

甲方:

身份证号:

乙方:______

公司注册地址:

法人代表:

第一条转让域名

本协议中所指网站域名包括:

___及___相关的二级域名与子目录。

___及___相关的二级域名与子目录所承载的网站全部源代码、内容等。

第二条转让前___相关信息___由__于________年____月____日登记注册，后用其搭建手机百事通网站并动作至今。

___所有者:

___注册人:

___管理员邮件:

___注册商:

第三条，转让承诺

甲方保证对本协议中第一条所指转让网站域名拥有完全且合法的所有权、处分权。如有欺诈或隐瞒行为，甲方认为乙方违约。本协议由双方签字后正式生效，本协议生效之前所产生的一切法律责任由甲方负责。本转让协议生效之后所产生的一切法律责任由乙方负责。

第四条软件转让金额

第五条权利与责任

1、协议生效后，本协议中所指网站域名的合法所有权、处分权归乙方完全所有。

2、甲方有义务配合乙方办理本协议中所指网站域名相关域名密码、域名管理邮箱、网站管理后台、网站备案信息等信息变更，否则乙方视甲方违约。

第六条，违约与解决

1、本协议生效后，一方行为违反本协议约定的、或一方违约行为导致另一方权益受损的，被违约方有权向人民法院提起诉讼，并要求违约方赔偿实际经济损失及被违约方维权行为所引发的诉讼费、律师费、误工费、差理费。

2、本协议未尽事宜，由甲乙双方另行订立补充协议，补充协议与本协议同样具备法律效力。补充协议相关条款与本协议条款矛盾时，以补充协议为准。

甲方:

签字日期:

乙方:

签字日期:

技术服务合同主要条款和合同范本

技术服务合同是指当事人一方以技术知识为另一方解决特定技术问题所订立的合同。技术服务合同中包括技术培训合同和技术中介合同。 技术培训合同是指当事人一方委托另一方对指定的专业技术人员进行特定项目的技术指导和专业训练所订立的合同。

技术服务合同应具有以下主要条款：

一、委托方提出的技术服务的项目的名称;

二、委托方提出的技术服务的内容及应达到的要求;

三、双方确定的培训计划、进度、期限、地点、方式;

四、委托方要求的师资水平、资历、要求;

五、委托方需要培训的人数，受托方要求委托方指定接受培训人员的技术能力、学历要求;

六、经协商确定的教员、学员的食、宿、交通、教材等费用及其他可能发生的费用标准的承担;

七、培训开展的必要物质条件(如教室、教具等)和双方应协作解决的事项;

八、学员水平验收考核的方法和标准(如实际操作、理论考试、现场答辩等);

九、委托方支付报酬的数额、时间、方式、地点等;

十、违约责任及承担违约责任的方式;

十一、违约金、赔偿损失的计算方法及数额;

十二、争议解决的方法;

十三、其他约定。

技术服务合同可由委托人直接与被委托人协商约定后签订，也可以由委托人通过中介与被委托人协商签订，不管采用什么方式，必须符合技术服务合同的特征，并不得遗漏其主要条款。

工程技术服务合同范本

工程技术服务合同

合同编号：___________________

转让方：____________________________

法定代表人或负责人：________________

受让方：____________________________

法定代表人或负责人：________________

根据《中华人民共和国合同法》的有关规定，经双方当事人协商一致，签订本合同。

第一条 项目名称：__________________________________

第二条 本非专利技术的性能，工业化开发程度：_______________________

第三条 本合同的授权性质：_______________________________________

(注：非专利技术转让合同当事人可以依照专利实施许可合同，采取独占、排他、普通许可证的形式。)

第四条 使用本非专利技术的范围： ______________________________

(注)使用范围指地域范围、期限范围、使用范围。

第五条 转让方的主要义务

1.在合同生效之日起________天内，向受让方交付下列技术资料：______________ 。

2.在合同履行过程中，向受让方提供下列内容的技术指导和服务：________________ 。

3.保证所转让的技术具有实用性，可靠性，即为能够应用于生产实践的成熟技术。保证使用本非专利技术能够达到下列技术经济指标：_______________________ 。

第六条 受让方的义务

1. 向转让方支付使用费，数额为________元。按下列日期分期支付______________ 。

(注：在采取提成支付的情况下，当事人可以约定：a.合同生效后________日内先向转让方支付_______元;b.自合同投产之日起(或第一件合同产品销售之日起)______年内按产值(或销售额、或利润)的______%向转让方支付提成费。提成费每年支付一次，支付日期为每年______月_______日前。)

2.按本合同约定的范围使用本非专利技术。

第七条 保密条款

在本合同有效期内，双方当事人应对下列技术资料承担保密义务：___________ 。

本合同期满后_______年后，双方当事人应对下列技术资料承担保密义务：___________ 。

第八条 合同产品的验收标准和方法：_________ 。

第九条 后续改进条款

在本合同履行过程中，双方当事人各自在本转让技术基础上作出的新的发明创造专利权归作出发明创造的一方所有，但当事人另有约定的除外。

第十条 转让方的违约责任

1.转让方不按照合同约定向受让方提供技术资料及技术指导，应视不同情况，返还部分或全部使用费，并支付数额为__________的违约金;

2.转让方逾期2个月不向受让方提供技术资料及技术指导，应视不同情况，返还部分或全部使用费，并支付数额为 _________的违约金;

3.转让方违反合同约定的保密义务，泄露技术秘密，使受让方遭受损失的，转让方应当支付数额为________的违约金。

受让方实施使用该非专利技术超越约定的范围的，违反约定擅自许可第三人实施该项非专利技术的，应当停止违约行为，支付违约金或赔偿损失。

第十一条 受让方的违约责任

1.受让方未按合同约定的期限和方式支付使用费，除应实效使用费外，应向转让方支付数额为_______的违约金，受让方拒不交付使用费或违约金，除必须停止使用非专利技术外，应当返还技术资料，支付数额为________的违约金。

2.受让方逾期2个月不支付使用费，转让方有权解除合同，受让方应当停止实施被转让的技术，返还技术资料，支付数额为________的违约金;

3.受让方使用本技术超越合同约定的范围的，应当停止违约行为，支付数额为________的违约金。

4.受让方未经转让方同意，擅自许可第三方使用本非专利技术，应当停止违约行为，返还非法所得，并支付数额为__________的违约金;

5.受让方违反合同约定的秘密义务，泄露技术秘密，应当返还非法所得，支付数额为______________的违约金。

第十二条 侵权风险责任承担条款

1.转让方应当保证自己是本非专利技术的合法所有者，而且在合同订立时尚未被他人申请专利。否则，由此引起侵害他人合权益的，应当由转让方承担法律责任;

2.在本合同履行过程中，如出现他人就同一技术申请专利或获得专利权的情况，受让方有权解除合同。由此造成的损失应当由双方当事人按如下比例合理分担：_____________ 。

第十三条 本合同争议的解决办法：________________________ 。

第十四条 名词和术语的解释：____________________________ 。

本合同自当事人双方签字盖章后生效。

转让方负责人(或授权代表) 受让方负责人(或授权代表)

签名：________________(盖章) 签名：__________________(盖章)

签字时间：___________________ 签字时间：_____________________

开户银行：___________________ 开户银行：_____________________

账 号：___________________ 账 号：_____________________

转让方担保人(名称)：_______ 受让方担保人(名称)：_________

地址：_______________________ 地址：_________________________

负责人(或授权代表) 负责人(或授权代表)

签字：________________(公章) 签字：__________________(公章)

签字时间：___________________ 签字时间：_____________________

签字地点：___________________ 签字地点：_____________________

信息技术教师年终工作总结

本文由第一范文网小编辑收集整理，这是一篇关于信息技术教师年终工作总结，欢迎浏览借鉴!

不知不觉中一个学期就要结束了，回顾这个学期的工作，基本上是比较顺利的。我所享有的收获，我会用于下个学期的工作中，我所碰到的问题我会认真思考，想办法解决。在这个学期中，本人能在保持原有良好工作态度的基础上，不断进步，不断进取，不断学习，虚心向有经验的老师学习。为了保持优良的工作姿态，以使下一学年能以更优秀的面貌去继续工作，现将本人这学期的工作情况进行全面的总结，总结如下：

一、思想方面

在这学期里，我从思想上，利用师德师风教育活动端正自己;从行动上学电脑技术，学教学技能等;在生活上注意形象，为人师表。一学期来，我积极参加政治学习，努力提高自身的思想觉悟，服从学校的工作安排，默默无闻地配合领导和老师们做好校内外的各项工作，得到了领导和同事的肯定。这些肯定使我在以后的工作中变得更有信心、有动力去做好每一样工作。

二、工作方面

这学期主要的工作主要包括在三个方面：一是担任九年级共4个班的信息技术课的教学，二是学校远程教育资源的接收、整理、运用及设备的检修、维护等工作，三是学校相关文件资料的打印及各项数据的录入、核算等。

为了做好微机室管理工作，更好地完成教学任务、为教学服务，本学期继续以发现和培养具有综合素质的学生为小组长，具体分工，连带促进，使各班每个组在上课时都能相互配合，共同遵守微机室的规章制度，按老师要求进行正确操作，养成良好的学习习惯和卫生习惯。

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

本学期,我校为适应社会的飞速发展、科学技术的突飞猛进，大力推进素质教育，加强了学校的教育装备工作，充分运用学校的教学仪器和现代化的教学设备，对照现代教育技术示范学校的标准，规范学校的办学行为，端正办学思想，不断加大投入，加强硬件、软件建设，开展师资培训，积极推广运用信息技术手段，掀起信息技术普及、应用、探索、创新的高潮，使教育教学质量迈上新台阶，现将我校信息技术工作总结如下：

一、推进教育信息化学习环境建设，不断加强硬件、软件建设。

20__年由于学校领导的努力，我校在信息技术硬件设备上进行了更新，改善了教师与学生的信息化学习环境条件。.我校现有两个学生电脑房，共有76台电脑，1个多媒体体教室，实现多媒体进教室，实施“班班通”工程。为信息技术与课程整合创设了良好的硬件环境。并且及时做好了学校计算机的维护和更新工作。

二、全面推进教育信息资源建设，提高现代教育技术开发水平。

(一).订好了现代教育技术软件，便教师们使用。

(二).在全校开展教师计算机基础培训，让所有教师都会简单的电脑操作，大多数教师会使用ppt制作课件。

(三).对学校计算机网络花费巨大精力进行整理，调试综合楼每间办公室和教室的网络。

(四).建立科学实验室和仪器室，使我校的实验教学有了实施的平台。

三、积极开展计算机培训，促进教学研究信息化，推进现代教育技术管理工作，提升了我校教育现代化水平。

为提高教师现代教育信息技术应用水平，我们在校内开展了多轮、多层次的计算机培训。学校一方面对各个学科的骨干教师进行计算机应用技术、计算机辅助教育培训。其目的是通过他们带头进行应用校园网的教学科研活动，为校园网的应用发展进行探索工作;让广大教师参加普及性的计算机操作基本技能和现代教育技术的培训。目的是让所有教师都积极参与到校园网的教学应用中，从而起到以点带面的作用。为鼓励教师钻研业务、积极参加各种比赛活动，提升教师的教学业务水平和教学能力，我校制定了明确的奖励条例，凡是在市级以上的各类比赛中获奖者，学校均将在教师的评优评先、小教高级竞聘等考评方案中给予加分。

四、存在的不足以及努力方向

(一)存在的不足

1.教师们在信息技术手段运用的水平方面还有些参差不齐。要进一步加强教师信息技术培训。

2.我校一些电教装备设备已经略显落后，需要进一步加大投入。

(二)努力方向

1.做好教师计算机校本培训工作，争取做到45岁以下教师人人会制作课件，刚进校的每位年轻教师擅长课件制作。

2.加强信息技术和学科课程整合，30岁以下教师运用课件在多媒体上一节岗位练兵课，并举行教师信息技术大赛。

回首这一学期，学校在奔向教育现代化的进程中，迈出了坚实、可喜的步伐。展望未来，纵观教育改革与发展的新形势，教育信息化已经成为全世界教育改革的潮流。以信息化带动教育现代化是落实这一重大举措的主要途径之一，也是新时期实现教育跨越式发展的必然选择。我们必须高举教育现代化大旗，努力适应信息时代的要求，提高信息技术应用水平，大力推进教育创新，发展有中国特色的社会主义教育事业，才能不断为社会主义现代化建设提供足够人才的支持和知识贡献。我们坚信，伴随着教育改革的铿锵旋律，江边中心学校现代信息技术教育之花，必然结出丰硕璀璨的创新教育之果。

转让方：_________________________

受让方：_________________________

鉴于：“_________”关键技术(以下称“CDMA20__”或技术成果)系经过转让方长时间的开发和实际项目的应用，技术上已完全成熟并得到特种行业用户的肯定，且具有广大的市场前景：鉴于受让方在市场开拓方面的完整商务能力，为更好地将成果应用于社会和行业用户，转让方愿意将该项技术成果转让给受让方，且受让方同意接受该技术成果。现本协议双方经过详细磋商，依据我国现行、有效的有关法律、法规之规定，就技术成果转让事宜达成协议如下：

1.第三代CDMA20__移动通信基站射频子系统及CDMA20__移动通信系统基站线性化放大器关键技术(以下称“CDMA20__”或技术成果)是指：包括但不限于有关第三代CDMA20__移动通信基站射频子系统及CDMA20__移动通信系统基站线性化放大器关键技术的软件(组件)、技术档案和技术资料。“CDMA20__”后继开发技术成果是指：包括但不限于现有CDMA20__技术的后续开发及相关的技术档案和技术资料。 “CDMA20__”关联技术成果及其后继开发技术成果是指：与现有CDMA20__技术有关的其他技术成果及技术档案和技术资料，及在此基础上的后继开发及相关的技术档案和技术资料。

2.转让方于本协议生效日将本协议所涉技术成果独家转让与受让方。于该转让日起，受让方拥有技术成果的所有权，但法律规定禁止转让的权益除外。

技术成果的转让包括但不限于在技术成果的相关权利保护期内下列各项权利：

(1)使用权，即以复制、展示、发行、修改、翻译、注释等方式使用技术成果的权利;

(2)使用许可权和获得报酬权，即许可他人以前项中规定的部分或者全部方式使用其技术成果的权利和由此获得报酬的权利;

(3)修改权，即修改或者授权他人修改技术成果的权利;

(4)其它法律、法规规定所享有的权利。

3.转让方应于本协议生效日将所转让的技术成果全部内容的详尽资料交付于受让方

(1)该技术资料包括但不限于：___________________________________。

(2)转让方提交的上述技术资料，应使本行业内具有普通技术水平的专业人员能够理解，并能够在此基础上对软件进行修改、维护和再开发。

(3)转让方向受让方提交上述技术资料后，不得继续保留载有该软件任何实质部分的任何载体。

(4)该等资料应确保受让方能够便利地使用、享有、行使本协议第1条所述的技术成果及相关权利。

4.转让方声明并保证在本协议技术成果转让前

(1)所转让的技术成果真实、完整、合法、有效、属于其所有，不存在任何权属争议。

(2)转让方有权转让本协议所涉之技术成果，且技术成果未存有抵押、质押或其它担保等情形;

(3)转让方在本协议签订前并未将技术成果以任何方式许可或泄露给任何第三方使用或获得利益。

(4)除在本协议签订前已购得该技术成果的合法权利人外(如有)(以转让方提供给受让方的权利人名单为限)，转让方并未将技术成果以任何方式许可或泄露给任何第三方使用或获得利益。

(5)转让方保证所提供的资料是完整、正确、清晰的并保证及时交付。

5.转让方声明并保证在本协议技术成果转让后

(1)非经受让方书面同意，转让方不以任何方式使用技术成果、授权他人使用技术成果、为他人非法使用技术成果提供任何条件。

(2)转让方应保证技术成果/著作的开发者和转让方及其具有雇佣关系的人员(以下合称雇员)和转让方的关联企业不使用、不许可他人使用技术成果、不为他人非法使用技术成果提供任何条件。如前述雇员或其关联企业有前列任何行为，转让方应就上述该等行为对受让方直接承担责任。

(3)转让方应就所转让的技术成果和技术成果使用者的有关情况以及其他与该技术成果市场有关的商业信息承担保密义务，上述保密义务同样适用于转让方雇员及/或关联企业。

6.受让方的承诺和保证

按本协议约定的转让金额在约定的付款时间内，全额支付给转让方。

7.转让方应就CDMA20__的关联技术给予受让方优先选择权，在同等条件下，受让方有优先购买权。

8.受让方应于本协议生效后三日内向转让方支付转让费人民币_________元整。

9.协议一方违约，应向另一方支付相当于全额转让费10%的违约金，如违约金不足以赔偿守约方因此所遭受的损失，违约方并应赔偿不足部分。

转让方未按第3条的要求向受让方提供资料，受让方有权要求转让方改正;至改正之日止，每逾期一日转让方应向受让方支付相当于全额转让费0.2‰的延期转让违约金。

10.协议一方有下列情形之一，另一方有权单方解除本协议，除执行上述第9条之约定外，并应返还从协议对方取得的的财产

(1)转让方违反第4条任何一项;

(2)未能履行前述第3、6条之约定;

(3)发生战争、自然灾害、政府行为等不可抗力，致使不能实现协议目的。

11.转让方应按受让方要求提供技术成果的技术培训、辅导等相关服务，直至受让方能够独立、正确地使用该技术成果。

12.因技术成果转让所需缴纳的有关费用，依法由各方承担。

13.本协议生效后，受让方基于本协议所涉之技术成果的后继开发、改进等技术成果的著作权及相关权利归受让方享有。

14.双方因履行本协议而提供之文件/资料作为本协议之附件，构成本协议的必要组成部分，与本协议具同等法律效力。

15.未尽事宜经协议双方协商一致并签订书面补充协议，该补充协议与本协议具同等法律效力。

16.因履行本协议而致之争议由双方友好协商解决，协商不成，提交人民法院裁决。

17.本协议一式_________份，自双方签字盖章之日起生效，由协议双方各执_________份，具有同等法律效力。

转让方(盖章)：_____________ 受让方(盖章)：_____________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年_______月_______日 _________年_______月_______日

签订地点：___________________ 签订地点：___________________

环评技术咨询合同范本

技术咨询是指咨询方根据委托方对某一技术课题的要求，利用自身的信息优势，为委托方提供技术选用的建议和解决方案。技术咨询是对特定技术项目提供可行性论证、经济技术预测、专题调查、分析评价等咨询报告，它是技术市场的主要经营方式和范围。以下是第一范文网小编今天要与大家分享的：环评技术咨询合同相关范本。内容仅供参考，欢迎阅读!

环评技术咨询合同

项目名称： *项目

甲 方： 潍坊X有限公司

乙 方： 潍坊市环境科学研究设计院

签订地点：山东省潍坊市

签订日期：20xx年6月21日

有效期限：20xx年6月21日至20xx年6月20日

中华人民共和国科学技术部监制

根据《中华人民共和国合同法》、《建设项目环境保护管理条例》(国务院[1998]第253号令)、《中华人民共和国环境保》、《中华人民共和国环境影响评价法》、《山东省实施〈中华人民共和国环境影响评价法〉办法》中的有关规定，合同双方就《*项目环境影响报告书》项目进行“环境影响评价”的专项技术服务，经协商一致，签订本合同，由双方共同恪守，甲方委托乙方进行技术服务的内容如下：

一、标的内容、形式和要求

为掌握该建设项目的环境保护基本情况及建设期和投产后对建设项目周围环境的影响，预防因规划和建设项目实施后对环境造成不良影响，促进经济、社会和环境的协调发展，潍坊X有限公司委托潍坊市环境科学研究设计院按照国家相关法律法规及标准、环保主管部门对该项目环境影响评价的有关要求，编制完成《*项目环境影响报告书》。

二、履行的期限、地点和方式

甲方提供的技术资料齐全的情况下，合同签订及预付款后70个工作日内，编制完成《*项目环境影响报告书》总量申请版，如甲方不能及时向乙方提供环评所需资料及经费，则评价进度顺延。

三、主要协作事项

为保证乙方有效进行技术服务工作，甲方应当向乙方提供的工作条件：

1、甲方应向乙方准确提供与工程有关的基本情况资料(工程概况、企业简介、总平面布置、资源、能源的储运、工艺流程、工艺参数、污染物排放参数，污染治理措施等)及与工程有关的专业技术资料(周围环境的地质、地形地貌、水文、气象、社会情况、工农业情况、土地利用规划等)。

2、提供环评执行标准的批文批复和总量申请指标确认书;提供经发局(委)的项目立项(备案)文件，项目的可行性研究报告。

3、乙方负责与地方有关部门的协调工作(如污染源调查;用水、用电、供汽等证明;污水处理接收证明;固废(危险废物)处置协议等)。

4、甲方负责提供公众参与调查材料。

5、甲方应为乙方现场踏勘、环境现状监测提供方便条件。

6、合同签订之日起实施，由甲方委派专人同乙方项目负责人协调落实。

四、技术资料的提供和保密

双方均应保护对方的知识产权和技术成果，未经对方同意，任何一方均不得对对方的资料及文件擅自修改、复制或向第三人转让或用于本合同项目外的其他建设项目。如发生以上情况，泄密方承担一切由此引起的后果并承担赔偿责任。

五、验收标准和方法

由乙方协助甲方将编制完成的《*项目环境影响报告书》上报山东省环境保护厅批复。乙方将负责根据各有关部门、专家组的意见，修改送审版环评报告书达到质量要求。

六、价款及其支付方式

根据国家计委、国家环境保护总局关于规范环境影响咨询收费有关问题的通知(计价格[20xx]12号)，该项目技术服务费总额共计人民币壹拾捌万圆整(￥180000)(包括监测费，不包括会务费、专家评审费和评估费)。合同签订后预付人民币玖万圆整(￥90000)，报告书通过专家组评审，报告书(报批版)完成后付清余款。

因工程内容导致环评内容改动较大的，甲方要求评价时间加急等其他特殊情况，评价经费另行协商。

七、合同生效及其他

1、环评期间遇到的其他相关问题，双方协商解决。环评涉及的项目名称如需修改，在报告书、报告表完成前由甲方及时通知乙方进行修改。

2、本合同双方签字盖章即生效，一式贰份，甲方一份，乙方一份。

3、未尽事宜，经双方协商一致，可签订补充协议，补充协议与本合同具有同等效力。

甲 方 名称(或姓名) 潍坊X有限公司(签章)

法定代表人 (签章) 委托代理人 (签章)

联系人 (签章)

住所

(通讯地址)

电话 电子邮箱

开户银行

帐号 邮政编码

乙 方 名称(或姓名) 潍坊市环境科学研究设计院(签章)

法定代表人 (签章) 委托代理人 (签章)

联系人 (签章)

住所

(通讯地址) 潍坊市奎文区新华路7号

单位网址：

电话/传真

电子邮箱

开户银行

帐号 邮政编码 261041

近两个月的中小学教师信息技术应用能力提升工程培训现以接近尾声。通过培训和学习，让我对教育现代化的发现有了新的认识，当今以计算机和网络技术为核心的现代技术正飞速的发展着，并且改变着我的学习方式。信息的获取、分析、处理、应用的能力将作为现代人最基本的能力和素质的标志。同时对我各方面的能力有了很大提高，特别是对信息技术的综合运用能力，现在已不只停留在课件的制作上。此次信息技术的运用的培训，使我在观念上有了更全新的更新。使我认识到作为一名教师应积极主动吸纳当今最新的技术，在这短短的培训中我收获颇多。

一、观念新颖

此次信息技术应用能力提升培训者培训，虽然时间短暂，但是每一天紧张有序的培训都使我在观念上有一个更新。在平时我都停流在基本应用上，然而通过此培训，才真正的认识到自我在专业方面还有许多的不足，在今后的业务提升方面还有大量的知识要学习，只有这样随时的自我更新、自我补充、从根本上提升才能和专业素质。

随着信息化快速发展，作为一名美术教师，必须具备良好的信息素养是终生学习、不断完善自身的需要。应具有现代化的教育思想、教学观念，掌握现代化的教学方法和教学手段，熟练运用信息工具(网络、电脑等)对信息资源进行有效的收集、加工、组织、运用;这些素质的养成就要求教师不断地学习，才能满足现代化教学的需要。

二、有力提升专业知识

通过远程网络聆听专家教授对“中小学教师信息技术能力的标准解读”，“信息化教学环境的专题报告和案例分析”的学习。让自己充分认识到教师作为孩子们的领导者，首先要具备最基本的信息技术的素养、掌握信息技术的操作的基本能力和应用处理信息技术的综合能力。深刻认识到深刻的认识到教育信息的重要性，明白什么是教育信息化发的发展情况，真正理解了信息化教学环境在教育教学中的作用使我真正的知道了什么是办公软件强大的功能，平时我只会对办公软件进行简单的应用，没有更进一步去学习，听了教授老师的解析与演示操作，深刻的认识到什么专业知识，我将在今后的工作中不断学习来丰富自我专业知识。

三、交流视野的开阔

远程研修教育不再局限在课堂，教师可以通过网络媒体通讯技术进行自主学习，可以随时将自己的薄弱环节强化学习，直到完全巩固.更加便于对每个知识内容的融会贯通，使原来想做而做不到的事情成为现实。通过这个平台，与教育专家进行了一次“零距离”的接触，“面对面”聆听他们的辅导讲座、鲜活的案例和丰富的知识内涵，让我开阔了视野。专业方面，通过论坛与同仁们的谈美术、探迷惑，使我在思想、专业方面都得到很大的提高。这种平台，使我们的距离变得更近、更方便交流。

通过看视频,视频答疑让我们有了一次与专家学者进行近距离探讨问题的机会。专家学者们奉献了他们的经验和研究成果，提高了我们的教学水平，让我们获取知识的同时，也让我们增长了见识。通过观看答疑，我得到了很大启发，学会了许多解决问题的方法和窍门，让我在今后的教学中更加游刃有余，对今后的教育教学来说受益匪浅!与老师交流，在班级论坛中发帖、回贴，进行论坛研讨等活动,我学到了很多新知识，并为以后的教学工作奠定了坚实的基础。

四、教学方法更新

此次远程教育培训，教育观念有所更新，教学方法更新，让我们农村教师也充分享受了运用远程教育培训的成果。结合专家讲座、作业练习、教师间相互交流等学习方式，更新教学理念，也明确了今后教学努力的方向。

本次培训让我在技术答疑篇模块中收获颇多：一是教学PPT设计入门;二是Flash教学动画应用基础;三是小学美术课堂提问与反思的教学策略;四是对小学美术教材资源提高教学效益和策略。这将对我的知识更新，能力提高具有很大的帮助。通过学习使我认识到在美术教学中，教师要关注教学目标、关注学生参与、关注课堂效益和质量。因此，教师应努力为学生的美术活动创造条件。

这次研修，使我耳目一新。通过深入学习，知道了作为一名教师必须不断的提高自己，充实自己，具有丰富的知识含量，扎实的教学基本功，才能适应社会，适应学生。这次培训我感觉增强了自身学习的紧迫性，危机感和责任感，只有不断进行教学观念的更新，树立新的教学观，转变教学方法，才能上出好课。上好一节课，不仅是知识信息的传播过程，更是一个心灵交汇的心理场。如果教师在教学中的表现只是平平淡淡，没有激情， 那么学生的情绪也不会特别高涨。因此我觉得在教学中激发学生的情感，教师自我的情感体现是非常重要的。

培训是短暂的，效益是明显的，收获是充实的。总之，这是收获丰厚的一次培训，充实和完善了自己，我很荣幸，但更多感到的是责任、是压力，也是促进我教学上不断成长的一次培训。这次培训使我站在了一个崭新的平台上审视了我的教学，使我对今后的教学工作有了明确的方向。我要把所学的教学理念，咀嚼、消化，内化为自己的教学思想，指导自己的教学实践。

技术转让协议

转让方（甲方）：

受让方（乙方）：

甲乙双方根据自愿互利的原则协商一致，特订立本合同，以便双方共同遵守.

。

二、甲方转让技术应达到的主要技术指标为： ，该项技术的参数和所生产产品的质量指标应当符合国家规定的产品质量标准，适合市场销售。

三、甲方的义务 1、甲方应于________年____月___日以前，将技术资料 交付乙方。 2、甲方负责在________年________月________日派出技术人员________到乙方处，指导乙方安装设备和产品试制工作，并保证在 年 月 日以前生产出 。

3、甲方人员在离开乙方工厂前必须负责把乙方安排的人员进行生产技术培训，生产出合格样品后，甲方人员才可离厂。

四、乙方的义务

1、双方协商议定，乙方向甲方支付的技术转让和培训费及支付方式：

A、技术转让和培训费总额为：；

B、技术转让和培训费由乙方分期支付甲方，具体支付方式和时间如下：

（1）

（2）

（3）2、在产品试制过程中，乙方应服从甲方技术人员的指导。

3、没有取得甲方的书面同意，乙方不得将转让技术转让给第三方，否则视为违约。

五、甲、乙双方确定以以下方式对乙方的技术转让和培训工作成果进行验收：

1、验收时间和地点： 。

2、经甲、乙双方共同验收确认后，由乙方向甲方出具体书面验收证明， 年 月 日以前乙方不组织验收，视为已经通过验收。

六、甲方的违约责任

1、甲方如不按合同规定的时间派出技术员，应承担乙方因此所受的损失。

2、甲方转让给乙方的技术如有疵漏，应及时更正和完善；如仍达不到合同规定的国家产品质量技术标准，甲方应退回全额技术转让和培训费。

七、乙方的违约责任 1、乙方如不按合同规定的时间、数量向甲方支付技术转让和培训费，应按本合同全部技术转让和培训费的40%向甲方偿付违约金，并赔偿相关损失。

本合同从________年________月________日起生效，甲乙双方在合同期间不得随意更改或废除合同.在合同中如有未尽事宜，应由双方协商，作出补充规定.补充规定与本合同具有同等效力.

本合同一式二份，甲乙双方各执一份。

甲方：______________________________________（盖章）

乙方：______________________________________（盖章）

______年______月______日

1 概述

1.1 实习目的 通过教师和工程技术人员的当堂授课以及工人师傅门的现场现身说法全面而详细的了解相关材料工艺过程。实习的过程中，学会从技术人员和工人们那里获得直接的和间接地生产实践经验，积累相关的生产知识。通过实习，学习本专业方面的生产实践知识，为专业课学习打下坚实的基础，同时也能够为毕业后走向工作岗位积累有用的经验。

1.2实习单位基本情况

控股股份有限公司 创立于1984年，是拥有近30亿资产和十几家分、子公司的国内首家自然人控股的上市公司。公司以 自信、诚心、创新 为企业精神， 以一流的管理和人力资源追求完美的产品质量和服务质量 为质量方针，实施产业链垂直整合，发展相关多元化产业的战略发展目标。它是集生产、科研、销售为一体，拥有10多个分子公司的国家重点高新技术企业，国家科技兴贸重点出口企业，中国电子元器件百强企业， 并被先后命名为省级先进基层党组织、浙江省非公有制企业党建工作示范点、省级文明单位和全国精神文明建设工作先进单位。其主要业务为磁性材料、电子元件、机械设备的生产、销售及技术开发，经营自产产品及相关技术的出口业务，经营本企业生产、科研所需的原辅材料、机械设备、仪器仪表、零配件及相关技术的进口业务。

1.2实习岗位基本情况

精电是控股股份有限公司的一个部门，主要生产各种pcba。其产线有dip线和smt.smt产线分为印刷、上料、炉前目检、炉后目检和aoi测试五个岗位，此外，每条产线上还有线长和技术员各一名。我所在的岗位是炉后目检。这个岗位需要目检生产出的pcba，目检出不良现象要及时送往维修区要保证流入下到工序的pcba没有不良现象。

2实习内容

2.1实习过程

(1)了解过程

起初，刚进入车间的时候，车间里的一切对我来说都是陌生的，呈现在眼前的一幕幕让人的心中不免有些茫然，即将在这里工作3个月。第一天进入车间开始工作时，所在产线的线长、技术员给我安排工作任务，分配给我的岗位是炉后目检，我按照技术员教我的方法，拿起电路板开始慢慢学着识别各种不良现象，在是识别的同时注意操作流程及有关注意事项等。毕业实习的第一天，我就在这初次的工作岗位上目检产品，体验首次在社会上工作的感觉。在工作的同时慢慢熟悉车间的工作环境。

作为初次到社会上去工作的学生来说，对社会的了解以及对工作单位各方面情况的了解都是甚少陌生的。一开始我对车间里的各项规章制度，安全生产操作规程及工作中的相关注意事项等都不是很了解，于是我便阅读实习单位下发给我们的员工手册，向产线上的员工同事请教了解工作的相关事项，通过他们的帮助，我对车间的情况及各个岗位等有了一定的了解。车间的工作实行两班制(a、b班)，两班的工作时间段为：早上8：00至晚上8：00;晚上 8：00至早上8：00。车间的所有员工都必须遵守该上、下班制度。

(2)摸索过程

对车间里的环境有所了解熟悉后，开始有些紧张的心开始慢慢平静下来，工作期间每天按时到厂上班，上班工作之前先到指定地点等待产线线长集合员工开会强调工作中的有关事项，同时给我们分配工作任务。明确工作任务后，则要做一下工作前的准备工作，于是我便到我们产线的工具存放区找来一些工作中需要用到的相关用具(比如：放大灯、镊子、标记笔等)。在指定岗位上根据员工作业指导书上的操作流程进行正常作业，我运用工作所需的用具对机器生产出的产品进行认真的目检，并打好标记将其流入下道工序。另外在工作中，机器生产出的产品有时会出现不良(比如：错件、偏移、侧立、空焊、少件、多件等)。出现上述情况时，要及时告知产线线长、技术员，让他们帮助解决出现的问题，线长、技术员通过对机器的调节让生产出的产品恢复正常，符合检验的要求。

现代远程教育为广大教师提供了一个学习、交流、合作、创新的平台，我积极利用远程网络资源，刻苦学习，努力提高自身的师德素养和教育教学水平。因此，我非常珍惜这个难得的学习机会，把远程教育研修作为提升自身素养，促进专业发展的一个主要学习方式。

1、学习的目的要有实效。

我几乎每天都安排了一定的学习时间和内容，把学习、作业、交流、讨论互相穿插，保证足够的时间与空间，获取最大的学习效益。我用课余时间和双休日完成了多项选修课程的学习，在网上向全国各地的教育专家、名师学习，就自己教育教学中出现的问题及困惑向网上发帖量达到多次，有效解决了问题。在学习中，我还做了大量的学习笔记，注重突出重点，突破难点，能够根据网上提供的一些案例发表自己的见解，探索更有效的方式与途径。

2、积累与运用。

学习的过程是一次知识积累与运用、创造的过程，因此要会学、善用。远程教育资源库中提供了大量的课堂实录和专家点评，我每次看后，总要有一个思考，即如何将这些优秀的、先进的教育教学经验及典型的案例带进自己的课堂，有针对性的运用到自己的教育教学实践中，从而收到事半功倍的效果，缩短同发达地区学校教学上的差距。通过实践对理论、经验的检验，寻找这些方式方法上的不同点、相同点与衔接点，完善自己的课堂教学方法，提升自身的课堂教学艺术。远程教育资源是十分丰富的，我经常把这些优势资源变成自己学校的有效资源，把资源库中的动画、图片、各种有用的资料下载下来，做成课件，运用于课堂，有效的弥补了本地教学资源的不足与缺乏。资源库中的资源不一定都是现成的，很符合本地教学使用，而需要一定的整合。我刻苦钻研计算机知识，结合教材所需，将一些抽象的教材内容通过多媒体技术具体化、形象化，并创设出身临其境的教学情景，开阔学生的视野，激起学生强烈的求知欲望，激活学生的思维，从而把一个个教学重点、难点进行实质性的突破。

3、共享资源，互帮互学。

远程教育学习是一个互动平台，需要大家共同参与，促进广大教师共同提高。我在参加远程教育学习中积极领先，模范带头，同年级组教师积极开展学习活动，把网上所学的优秀案例、课件同教师们共同分享，共同探讨，把自己的学习体会经常同教师们交流，把自己撰写的案例、运用所学经验所上的课积极向老师们征求意见，积极修正，取长补短，不断地提高自己，完善自己的教学风格，提升自己的教学水平。