进口设备买方责任热门20篇

原告：_________________，性别：_________________，__________年__________月出生，籍贯：_________________

家庭住址：______________工作单位：______________联系电话：______________

被告：_________________，__________，__________年__________月出生，籍贯：_________________家庭住址：_________________工作单位：_________________联系电话：________________诉讼请求：________________

1、判令解除原告与被告签订的租赁合同，被告将承租的房产交还原告。

2、判令被告按现有市场价向原告支付从年月至被告归还房产之日的拖欠租金;

3、依法判决原告不返还被告保证金元。

4、判令诉讼费用由被告承担。

事实与理由：_________________

__________年__________月__________日，原被告签订《房屋租赁合同》，约定被告承租原告所有的位于郊外的房屋，面积__________平方米(房产证号________________)，租赁期共__________个月，自__________年__________月__________日起至__________年__________月__________日止。月租金__________元，年租金总__________元整。甲方向乙方收取房屋保证金__________元。合同约定，租赁期间，乙方有以下行为之一的，甲方有权解除合同收回房屋：_________________

具状人：______________

_____年_____月_____日

甲方：

乙方：

经甲、乙双方友好协商，针对甲方在--市中银电化有限公司中得的`两台半自动包装机达成如下协议：

一、价格：甲方在--市中银电化有限公司中得的两台半自动包装机(具体包括：包装机、支架、皮带传输机、除尘箱、配电柜各两台，包装机起动部分)以陆万陆仟元的价格转让给乙方。

1、具体分配如下：货款陆万元计：60000元，运费叁仟元计：3000元，拆装费壹仟元计1000元。

2、设备完整的说明书、图纸等(待定)。

二、工期：自合同签定十日内。

三、双方责任：

1、甲方负责拆装费用，并保证完好无损运输到乙方厂内，中途设备得绑好不能受潮雨淋。

2、乙方负责监督甲方装车及拆装。

四、付款方式：双方签字认可合同内容，甲方收到乙方货款订金贰万元(计：20000.00元)，合同成立。剩余货款肆万元(计：40000.00元)待甲方圆满地把货物运到乙方公司内不卸车之前付清。

五、违约责任：

1、收到乙方定金如果甲方不能保证按时保质运货至乙方厂内，将定金如数返还给乙方，并承担违约金。

2、合同成立，乙方如果不能按时提货，定金将不予退还。

六、票据：如果甲方不能给乙方开普通票据，甲方给乙方减免货款叁仟元(计：3000.00元)。

七、未尽事宜，以口头协商为准。

八、甲方收款人：

户名：

开户行：

帐号：

九、本合同一式两份，甲、乙双方各执一份。

甲方：

乙方：

签订日期：

债权人简称甲方，连带保证人简称乙方。兹为将来债务保证经双方同意订立本契约如下：

第一条乙方应担保主债务人将来所负首开最高限额的票据上债务的清偿，及其利息迟延违约金实行担保物权费用。以及因债务不履行而行的全部损害赔偿。

第二条甲方如未经乙方的同意，纵对主债务人为超过第一条所约定、限度的、透支借贷时，乙方就超过额仍应负责任。

第三条甲方经同意主债务人将债权担保物件之一部分先行解而抛弃抵押权，或调换其一部分或全部时，乙方的连带保证责任并不因此而变更，仍应负责不得借口以担保物权中途变更而主张免除其责任。

第四条主债务人如不含有约履行债务时，不拘担保物件的多寡，乙方经甲方通知后，应即将主债务人所负的债务全部代为清偿，并愿意抛弃先诉抗辩权。

第五条乙方的保证债务履行地约定为甲方所在地。

第六条乙方不依约履行责任时，其诉讼法院管辖悉听甲方指定，乙方决无异议。前项诉讼费用乙方应我连带赔偿决不推诿。

第七条乙方同意甲方得将对主债务人所有债权之一部分或全部，以及其担保物权一并转让与他人。

本契约一式两份，当事人各执一份为凭。

债权人：______

住址：______

身份证号码：______

连带保证人：______

住址：______

身份证号码：______

________年________月________日

你好，意向性合作协议范本：________________

甲方：________________

乙方：________________

经甲乙双方友好协商，在平等自愿、互惠互利的基础上达成如下意向合作协议：________________

一、甲方作为电商平台，有意向将平台上所售商品存储至乙方提供的符合甲方条件的仓库内进行管理；

二、乙方做为第三方仓储服务商，愿在未来给甲方提供电商仓储服务。服务内容不限于提供仓库场地、人员配置、水电网络、库内管理、配货发货等一系列服务；

三、乙方在签订意向合作协议书后，在同等条件下有优先与甲方签订仓储合同的权利；

四、本协议为甲乙双方以后签署正式合作合同的基础，所涉及到的任何费用项目、具体合作事宜需后续双方洽谈达成进一步共识，签订正式合同后生效；

五、本协议不具有法律效力，仅表达甲乙双方的合作意向；

六、本协议一式两份，甲乙双方各执一份。

甲方签字盖章：________________乙方签字盖章：________________

日期：________________日期：________________

出卖人：____________

买受人：____________

签订地点：____________

签订时间：____________

第一条、标的、数量、价款及交货时间

第二条、质量标准：____________

第三条、出卖人对质量负责的条件及期限：____________

第四条、包装标准、包装物的供应回收：____________

第五条、随机的必备品、配件、工具数量及供应办法：____________

第六条、合理损耗标准及计算方法：____________

第七条、标的物的所有权自时起转移，但买受人未履行支付价款义务的，标的物属于所有。

第八条、交货方式及地点：____________

第九条、运输方式及到达站和费用负担：____________

第十条、检验标准、方法、地点及期限：____________

第十一条、成套设备的安装与调试：____________

第十二条、结算方式、时间及地点：____________

第十三条、担保方式：____________

第十四条、本合同解除的条件：____________

第十五条、违约责任：____________

第十六条、合同争议的解决方式：____________本合同在履行过程中发生的争议，由双方当事人协商解决也可由当地工商行政管理部门调解协商或调解不成的，按下列第种方式解决提交仲裁委员会仲裁依法向人民法院起诉。

第十七条、本合同自生效

第十八条、其它约定事项

出卖人

出卖人：____________

住所：____________

法定代表人：____________

委托代理人：____________

电话：____________

传真：____________

开户银行：____________

账号：____________

编码：____________

买受人

买受人：____________

住所：____________

法定代表人：____________

委托代理人：____________

电话：____________

传真：____________

开户银行：____________

账号：____________

编码：____________

鉴证意见：____________

经办人：____________

出租方：(简称甲方)

承租方： (简称乙方)

甲、乙双方根据《中国工商银行X市信托部设备租赁业务试行办法》的规定，签订设备租赁合同，并商定如下条款，共同遵守执行。

一、甲方根据乙方上级批准的项目和乙方自行选定的设备和技术质量标准，向 购进以下设备租给乙方使用。

二、甲方根据与生产厂(商)签订的设备订货合同规定，于年季交货，由供货单位直接发运给乙方。乙方直接到供货单位自提自运。乙方收货后应立即向甲方开回设备收据。

三、设备的验收、安装、调试、使用、保养、维修管理等，均由乙方自行负责。设备的质量问题由生产厂负责，并在订货合同中予以说明。

四、设备在租赁期间的所有权属于甲方。乙方收货后，应以甲方名义向当地保险公司投保综合险，保险费由乙方负责。乙方应将投保合同交甲方作为本合同附件。

五、在租赁期间，乙方享有设备的使用权，但不得转让或作为财产抵押，未经甲方同意亦不得在设备上增加或拆除任何部件和迁移安装地点。甲方有权检查设备的使用和完好情况，乙方应提供一切方便。

六、设备租赁期限为 年，租期从供货厂向甲方托收货款时算起，租金总额为人民币 元(包括手续费 %)，分期交付，每期租赁金元，由甲方在每期期末按期向乙方托收。如乙方不能按期承付租金，甲方则按逾期租金总额每天加收万分之三的罚金。

七、本合同一经签订不能撤销。如乙方提前交清租金，结束合同，甲方给予退还一部分利息的优惠。

八、本合同期满，甲方同意按人民币 元的优惠价格将设备所有权转给乙方。

九、乙方上级单位同意作为乙方的经济担保人，负责乙方切实履行本合同各条款规定，如乙方在合同期内不能承担合同中规定的经济责任时，担保人应向甲方支付乙方余下的各期租金和其他损失。

十、本合同经双方和乙方担保人盖章后生效。本合同正本两份，甲、乙方各执一份;副本 份，乙方担保人和乙方开户银行各一份。

甲方：(公章)

负责人：(签章)

开户银行及账号：

年 月 日

乙方：(公章)

负责人：(签章)

开户银行及账号：

年 月 日

经济担保单位：(公章)

负责人：(签章)

年 月 日

2020年设备采购合同范本

合同编号：

需方（以下简称“甲方”）:

供方（以下简称“乙方”）：

甲乙双方经协商一致，就甲方向乙方购买————事宜，达成以下协议,双方共同遵守：

一、产品名称、数量、价格

序号产品名称及牌号或商标产地或国别规格、型号计量单位数量单价金额（元）

1

2

3

合计金额￥ 大写： （含税价）

卖方保证所提供的所有设备是全新的，并且采用卖方最新设计和合格的材料制造，各方面符合合同所规定的质量、规格、型号等要求。

二、质量要求、技术标准

执行国家、地方颁发的质量标准和行业标准。乙方在本合同签订前5日内向甲方提供加盖公章的关于该产品的国家质量标准文件，在供货时附出厂合格证书，作为本合同的有效附件。

三、交货：

1、交货日期：甲方支付预付款后———— 个工作日。

2、交货方式：乙方负责运输并承担运费、装卸货费用。

3、交货地点：———————— 。

四、卖方对质量负责的条件及期限：

1、设备自安装、调试合格之日起保质期———— 年。

在保质期内因设备本身的质量问题，卖方在接到买方通知后24小时内到达买方现场，卖方负责免费修理、更换零部件或退换。在质保期内，卖方应对设备出现的质量及安全问题负责处理、解决。

2、乙方提供———— 年免费维修，如在设备使用过程中发生质量问题，乙方在接到甲方通知后48小时到达甲方现场，在设备使用过程中发生的有关技术性问题，卖方在接到买方通知后24小时内给予答复。

3、因设备质量问题发生争议，由甲方所在地的技术单位进行质量鉴定。

五、设备的包装、发运及运输：

1、乙方应在设备发运前对其进行满足于运输距离、防震、防锈和防破损装卸要求的包装，以保证货物安全运输到达甲方指定地点。

2、包装上注明货物品种及数量。使用说明书、质量检验证明书、随配附件和工具以及清单与设备一起发送。

3、设备在发运手续办理完毕后24小时内发货到甲方，乙方通知甲方准备接货。

六、设备的安装、调试及验收：

1、甲方对乙方所交设备依照国家有关技术标准和双方确认的技术标准进行现场验收。

2、安装由甲乙双方现场安装调节器试，性能达到技术要求的，给予签收，验收不合格的不予签收。

3、甲方收货时对产品的外观检查或开箱清点，不能免除供方对产品内在质量的责任。

七、 付款方式：

1、签订合同后———— 个工作日内支付合同总金额———— %的预付款。

2、设备到达交货地点后，经甲方指定人员初步检验，甲方在检验符合合同附件所规定的数量、规格、型号后———个工作内支付合同金额的 ————%。

3、设备安装调试完成后，并经甲方验收合格后———— 个工作日内，支付合同总金额的10%。

4、合同总金额的———— %作为质保金，在质保期届满后支付。

5、乙方在甲方每次付款前开具正式增值税发票。

八、违约责任

1、逾期交货、调试合格或付款的，每天按合同总价的万分之五向对方支付违约金。

2、 甲方无正当理由拒收的，应向乙方支付合同总价10%的违约金。

3、乙方不能在合同规定时间内调试合格的，甲方有权解除合同，此时乙方应向甲方支付合同总价款10%的违约金。

4、乙方所交的设备品种、型号、规格、质量不符合合同约定、国家标准，所供设备达不到约定技术要求的，乙方必须无条件退回全部货款，向甲方支付合同总价款30%的赔偿金。

九、禁止商业贿赂和保守商业秘密、知识产权：

1、乙方承诺在业务往来过程中，不向甲方人员赠送现金、物品或以其他形式给予甲方人员利益。

2、双方负有谨慎保护对方商业秘密及知识产权的义务。未经对方书面允许，任何一方不得披露、自用及许可他人使用。

十、争议解决方式：

本协议在履行过程中，如发生争议，双方友好协商解决，如协商不成，双方同意由签约地法院起诉解决。

十一、其他：

本协议自双方签字盖章之日起生效。本协议一式四份，甲乙双方执两份，具有同等法律效力。本协议签订于某市某区————。乙方系内资企业，营业执照号码：————。

甲方： 乙方：

地址： 地址：

法定代表人或授权代表： 法定代表人或授权代表：

电话： 电话：

传真： 传真：

帐号： 帐号：

年 月 日 年 月 日

甲方：______________(以下简称甲方)

乙方：______________(以下简称乙方)

根据《中华人民共和国民法典》及有关规定，结合发电有限责任公司的具体情况，经双方协商一致，签订本合同，以资共同遵守。

第一条工作范围与内容

乙方为甲方提供24小时不间断程控电话通讯服务及市话直线服务;电话机移机服务，微波电路、调度总机、输煤调度系统、自动交换机、生产监控系统、生产用时钟显示系统等服务。

第二条合同期限

本合同期限一年。

第三条承包方式

包工不包料

第四条合同总价

本合同总价为人民币(大写)________元整(含增值税及附加税)。

第五条材料供应

1.乙方负责本合同范围内所用材料的采购、运输、仓储保管及规定的材料鉴定试验;

2.乙方采购的材料须符合国家或行业现行的有关标准，并符合国家及上级主管部门规定的进货渠道。

第六条验收标准

1.缺陷消除率100%;

2.微波设备运行率为99.8%;

3.交换设备运行率为99.9%;

4.调度总机运行率为99.9%。

第七条质量保证金

1.本合同质量保证金为合同总价的10%;

2.因乙方责任而不能履行合同或不能完全履行合同时扣除全部或部分质量保证金。

第八条付款方式

甲方按时间进度付款，付款时乙方需开具服务业发票(与付款额度相同)，乙方在每月________日前补开当月差额部分发票(年总费用十二分之一扣除当月已开发票)，甲方在每月_______日前结清当月90%的服务费，其余10%未付部分待质保期满，经验收合格后支付。

第九条违约责任

1.甲方不按本合同规定向乙方支付款项，应承担违约责任(包括支付因其违约导致乙方增加的经济支出和从应支付之________日起计算的应付款项的利息等)。

2.乙方不能按照合同规定的进度完工或质量达不到合同规定的要求而使甲方蒙受重大经济损失，及未按本合同规定向甲方提交资料，应承担违约责任，赔偿因其违约给甲方造成的损失。

第十条、争议或纠纷：

因本合同的解释、违约等引起的任何争议或纠纷，应通过友好协商解决或委托专家鉴定。如仍未能解决，可提交仲裁机构仲裁，仲裁裁决是终局的，对合同双方都具有约束力。

甲方：__________乙方：__________

甲方：

乙方：

经甲方通过市场考察，确定在乙方采购汽车维修设备一批，商定总造价82.46万元，乙方优惠2.46万元，实结付80万元整，在双方互惠双赢的情况下，签定如下协议：

1、所采购汽修设备大件包质量一年(如烤漆房、大梁校正仪、四轮定位仪)等;小型设备包质量3个月(详见清单);

2、乙方配备所有设备后，甲方一次性付清货款;

3、在保质期内，如出现质量问题，乙方无条件修复，并保证甲方设备的正常运转工作。

此协议一式两份，双方签字生效。

甲方： 乙方：

日期： 日期：

收购方（甲方）：___________________

繁殖方（乙方）：___________________

根据《中华人民共和国民法典》、《中华人民共和国种子法》及相关法律法规规定，为明确双方权利义务，经双方协商一致，达成如下协议。

第一条 标的、数量、价款

第二条 质量标准

第三条 繁殖要求

1.乙方应具备农作物种子生产的环境、技术及相关许可证明文件。

2.甲方有偿提供符合___________标准的原种（亲本），价格为_____元/公斤，合计___________元，价款按下列第____种方式支付：

（1）乙方于______年____月____日前一次付清。

（2）于交货时在收购价款中抵扣。

3.技术服务及要求

________________________________________________________________________。

第四条 交货及运输

1.交货时间：乙方应在______年____月____日前将繁殖收获的全部种子交付甲方。

2.交货地点________________________________________。

3.包装及运输方式__________________________________。

第五条 验收

1.甲方应对种子进行验收，如发现种子数量、质量（发芽率、净度、含水量）不符合合同约定，应在____日内提出异议；如发现种子纯度不符合合同约定，应在____日内提出异议，乙方应在____日内处理。

2.双方对种子同时取样、各自封存，样品保存至生产收获。

第六条 付款方式及期限

选择下列第____种方式执行：

1.甲方于______年____月____日支付价款。甲方付款后，乙方应当开具销售凭证。

2.其他付款方式及期限______________________________。

第七条 违约责任

1.一方迟延交货或迟延支付收购款的，应当每日按照迟延部分价款____%的标准向对方支付违约金。

2.甲方提供的原种（亲本）不符合质量标准的，乙方有权要求甲方赔偿相应损失。

3.甲方未按约定收购符合要求的种子的，应按照每亩________元的标准向乙方支付违约金。

4.乙方交付的种子不符合约定质量的，甲方有权要求乙方赔偿相应损失。

5.乙方故意不交付种子的，或擅自将种子或原种（亲本）出售给他人的，应按照每亩__________元的标准支付违约金。

6.其他违约责任____________________________________。

第八条 其他约定

_____________________________________________________________。

第九条 争议解决

发生的争议，由双方协商解决；也可以请求工商部门调解或依法向人民法院提起诉讼。

第十条 本合同自双方签字（盖章）之日起生效。未尽事宜，由双方共同协商签订补充协议。本合同一式____份，甲方____份，乙方____份，具有同等法律效力。

收购方（甲方）：_______________ 繁殖方（乙方）：__________________

营业执照注册号：_______________ 营业执照注册号：__________________

法定代表人：___________________ 法定代表人：______________________

委托代理人：___________________ 委托代理人：______________________

地址：_________________________ 地址（住址）：____________________

开户银行：_____________________ 开户银行：________________________

账号：_________________________ 账号：____________________________

联系电话：_____________________ 联系电话：________________________

签订地点：_____________________ 签订地点：________________________

签订时间：_______年____月____日 签订时间：__________年____月____日

出租方：______________(简称甲方

承租方：______________(简称乙方)

经甲、乙双方协商决定签订设备租赁合同，并商定如下条款，共同遵守执行。

一、甲方根据乙方的要求，将下列机械设备出租给乙方使用。

1.数控浪板成型生产线(壹套)

2.数控弧形板生产线(壹套)

3.剪板机(壹台)

4.三辊卷板机(壹台)

5.喷砂抛丸机(壹台)

6.数控C自动切割机(壹台)

7.型数控剪板机(壹台)

8.U型成型机(贰台)

二、甲方于_______年_______月________日发运给乙方。

三、设备的验收、安装、调试、使用、保养、维修管理等，均由乙方自行负责。

四、在租赁期内，乙方享有设备的使用权，但不得转让或作为财产抵押，未经甲方同意亦不得在设备上增加或拆除任何部件和迁移安装地点。甲方有权检查设备的使用和完好情况，乙方应提供一切方便。

五、设备租赁期限为五年，租期甲方向乙方发运之日算起，租金总额为人民币______________元，分拾期交付，每期租赁金____________元，由甲方在每期期末按期向乙方收取。如乙方不能按期承付租金，甲方则按逾期租金总额每天加收万分之三的罚金。

六、本合同一经签订不能撤销。

七、本合同期满，甲方同意按人民币________________元的优惠价格将设备所有权转给乙方。

八、本合同经双方和乙方担保人盖章后生效。本合同正本两份，甲、乙方各执一份

甲方：______________

乙方：______________

债权人(简称甲方)：

保证人(简称乙方)：

兹为将来债务保证经双方同意订立本契约如下：

第一条 乙方对主债务人 __与甲方间已于年月日所订契约，主债务人向甲方以本金 元整为限度透支借款，乙立自愿应甲方的要求与主债务人负连带保证责任是实。

第二条 乙方应担保主债务人将来所负首开最高限额的票据上债务的清偿，及其利息迟延违约金实行担保物权费用。以及因债务不履行而行的全部损害赔偿。

第三条 甲方如未经乙方的同意，纵对主债务人为超过第一条所约定、限度的、透支借贷时，乙方就超过额仍应负责任。

第四条 甲方经同意主债务人将债权担保物件之一部分先行解而抛弃抵押(质押)权，或调换其一部分或全部时，乙方的连带保证责任并不因此而变更，仍应负责不得借口以担保物权中途变更而主张免除其责任。

第五条 主债务人如不含有约履行债务时，不拘担保物件的多寡，乙方经甲方通知后，应即将主债务人所负的债务全部代为清偿，并愿意抛弃先诉抗辩权。

第六条 乙方的保证债务履行地约定为甲方所在地。

第七条 乙方不依约履行责任时，其诉讼法院管辖悉听甲方指定，乙方决无异议。

前项诉讼费用乙方应我连带赔偿决不推诿。

第八条 乙方同意甲方得将对主债务人所有债权之一部分或全部，以及其担保物权一并转让与他人。

本契约一式两份，当事人各执一份为凭。

债权人(甲方)：

住址：

身份证统一号码：

连带保证人(乙方)：

住址：

身份证统一号码：

中国深圳对外贸易货物进口合同

（6）insurance policy / certificate in_________copies .

（7）certificate of origin in _________ copies issued by_________.

（8）hipping advice：_________

in addition ， the sellers shall， within _________ hours after shipment effected ， send each copy of the above-mentioned documents no. _________directly to the buyers by courier service.

13、shipment

fob

the sellers shall ， 30 days before the shipment date specified in the contract advise the buyers by cable / telex /fax of the contract no. ， commodity ， quantity ， amount ， packages ， gross weight ， measurement ， and the date of shipment in order that the buyers can charter a vessel / book shipping space . in the event of the sellers failure to effect loading when the vessel arrives duly at the loading port ， all expenses including dead freight and / or demurrage charges thus incurred shall be for sellers account.

cif或cfr

the sellers shall ship the goods duly within the shipping duration from the port of shipment to the port of destination . under cfr terms ， the sellers shall advise the buyers by cable/fax/telex of the contract no. ， commodity ， invoice value and the date of despatch two days before the shipment for the buyers to arrange insurance in time.

ddu

the sellers shall ship the goods duly within the shipping duration from the port of the port of destination.

_________

14、hipping advice ：

the sellers shall immediately upon the completion of the loading of the goods ， advise buyers of the contract no.， names of commodity ， loading quantity ， invoice values ， gross weight ， name of vessel and shipment date by tlx/fax/cable within_________hours .

15、quality guarantee ：

the sellers shall guarantee that the commodity must be in conformity with the quality and specifications specified in this contract and letter of quality guarantee .the guarantee period shall be_________ months after the arrival of the goods at the port of destination ， and during the period the sellers shall be responsible for the damage due to the defects in designing and manufacturing of the manufacturer.

16、goods inspection ：

the sellers shall have the goods inspected by _________inspection authority _________ days before the shipment and issued the inspection certificate . the buyers shall have the goods reinspected by $$$inspection authority after the goods arrival at the destination.

17、claims：

the buyers shall lodge claims against the sellers based on the inspection certificate issued by china _________ inspection authority _________ days after the arrival of the goods at the destination ， if the goods are found to be damaged ， missing or the specifications ， quantity， and quality not in conformity with those specified in this contract and letter of quality guarantee . in case the claim period above specified is not in conformity with the quality guarantee period， during the quality guarantee period， the buyers have rights to lodge claims against the sellers concerning the quality guarantee.

共6页，当前第5页123456

甲方： 开鲁县三棵树小学 (以下简称甲方)

乙方： 通辽格瑞德复合材料有限公司 (以下简称乙方)

根据《中华人民共和国合同法》等有关法律、法规的规定，双方经友好协商，就三棵树小学新建餐厅空调安装达成如下协议：

第一条 工程内容：

工程名称： 新建餐厅空调安装

工程地点： 开鲁县三棵树小学

承包范围和内容：中央空调系统工程的安装、调试、验收及维保。

合同工期：

开工日期：20xx 年11 月1日

竣工日期：20xx 年11月10日

工期总日历天数为：10 天

第二条 双方责任：

甲方责任：

1、甲方应根据国家或行业有关标准、规定，

2、向乙方提供开展工作所需的有关技术资料，并对提供的时间、进度和资料的可靠性负责。

3、负责协调施工过程中与有关单位的配合问题。

4、负责现场水电供应，以满足乙方正常施工、调试。

乙方责任：

1、乙方保证全部按照合同条款的规定和竣工期向甲方提供合格的服务。

2、乙方应按《通风与空调工程施工质量验收规范》(GB50243-20xx)进行施工组织和具体实施，保证质量。

3、乙方施工人员应严格遵守甲方的规章制度。注意施工安全并委托专职安全检查员，若发生安全问题由乙方负责任。

第三条 合同价款及支付：

1、合同价款：本合同总金额大写： 贰万 元整。

2、付款方式：合同签订三日内，甲方支付乙方材料款：即 10000.00 人民币，工程完成后，甲、乙双方共同验收，合格后付清余款：即 10000.00元人民币

3、付款账号：

银行账号：

持卡人：

开户行：

第四条 质量标准、验收及工程质量保证：

1、工期：同合同工期。

2、质量标准：《通风与空调工程施工质量验收规范》。

3、竣工验收：

3.1、乙方应委派有专业资质的人员进行调试、验收。

3.2、乙方提交竣工资料和报告后，甲方应在三日内组织验收;如甲方在三日内不组织验收，则视为验收合格。

4、工程质量保证：

4.1、产品自交付调试完成后保质24个月。在质保期内，由于乙方原因造成的事故，乙方负责排除，费用由乙方负责。由于甲方原因造成的事故，乙方负责排除，费用由甲方负责。

4.2、乙方在接到甲方维修要求后，将立即委派工程技术人员10小时之内赶到现场，及时排除故障。

第五条 违约

1、甲方或乙方不能按本合同条款约定内容履行自己的各项义务及发生使合同无法履行的行为，应承担相应的违约责任，包括支付违约金，赔偿因其违约给对方造成的全部经济损失。

2、如因乙方自身原因造成未按合同约定工期完成工程施工内容，每延误一天，应向甲方支付合同总价千分之一的违约金;工程延期超过五天，每延误一天，乙方应向甲方支付合同总价百分之三的违约金;工期延误超过10天，甲方有权单方终止本合同。如由于其他专业造成乙方无法按期施工，或现场不能满足乙方施工条件等原因，造成的乙方未按期完成施工内容，经甲、乙双方确认后，乙方不负违约责任。

第六条 仲裁及诉讼

凡有关本合同或执行本合同而发生的一切争执，应通过友好办商解决。如不能解决，则向通辽市人民法院诉讼解决。诉讼费用由败诉方负担。

第七条 合同生效及其它

1、本合同自甲乙双方代表签字并加盖公章(或合同章)后生效。

2、本合同的履行地为甲方本工程项目所在。

3、合同签订后甲乙双方即直接产生权利与义务关系，合同执行过程中出现的问题应按照《合同法》等有关规定办理。

4、合同中的未尽事宜，甲乙双方在不违背本合同的原则下协商解决，协商结果以“纪要”形式经双方盖章记录备案，作为本合同的附件，与本合同具有同等法律效力。

本合同书共二份，甲方执一份，乙方执一份。

甲方： 乙方：

(盖章) (盖章)

代表签字： 代表签字：

日期： 日期：

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

签订日期：

合同编号：

甲方(出租方)：中国水电十五局设备租赁公司

乙方(承租方)：

根据《中华人民共和国合同法》的有关规定，按照平等互利的原则，为明确甲、乙双方的权利义务，经双方协商一致，特签订本合同。

第一条 租赁设备

管理

编号 设备

名称 规格

型号 计时器

读数 数量 设备

状况

第二条 使用地点：

第三条 租赁期限

自 年 月 日至 年 月 日止，租赁期满，乙方将设备完好地交给甲方并办理退场手续，若乙方继续使用，应

在本合同期满一月前预订、一周前重新签订续租合同。

第四条 甲乙双方的权利和义务

1.在租赁期间，租赁设备的所有权属于甲方，乙方对租赁设备只有使用权。

2.甲方为租赁设备配备操作司机 名(机长)，工资由甲方负责承担，乙方负责安排操作司机的食宿。

3.租赁期间，甲方操作人员由乙方统一指挥，甲方人员不得违反，但对违反操作规程或安全规程的指令，甲方操作人员有权拒绝执行，同时甲方操作人员要积极与乙方配合，尽可能通过其它方法完成施工任务;确因甲方操作人员不服从乙方正确、合理指挥的，乙方有权要求甲方更换设备操作人员。

4.工作签证，有计时器的按计时器每月进行一次时间签认。无计时器的设备，每天的作业时间由乙方指定授权工作人员与甲方工作人员(机长)在时间签证单上共同签字生效。时间签证单一式两份，甲乙双方各执一份。甲乙双方应本着互信、互利的原则，任何一方不得在工作时间签证单上弄虚作假、暗箱操作。

5.在租赁期间，乙方如对租赁设备进行改善或者增设它物，必须以书面形式向甲方申请，征得甲方的书面同意。

6.在租赁期间，乙方如对租赁设备转租给第三人或转移使用地点，必须征得甲方书面同意。

第五条 租金的计算和支付

1.设备租赁费按以下第 种方式计算：

1) 按月：每月租赁费 元(大写： 元整)，每月结算一次;

2) 按工程量：每 m3 (工程量)计租赁费 元(大写： 元整)，每月结算一次。

2.按月计算租赁费时，租赁期间原则上每天工作时间为一个台班(不超过8 小时)，每月工作25个台班，每月工作 小时为计费基数。非甲方因素造成月工作小时不足小时，其租赁费按 小时计收。因乙方工作所需，而甲方设备性能又能满足需要超出部分视为加班，每月按超出台班数计收加班租赁费，超时费按 元/小时计。

3.若甲方设备月完好时间不足25天，本月结算按扣除总停机天数后的产值与实际工作小时数的产值两者中取较大者结算。

4.乙方必须在当月预付下个月的租赁费，甲方指定收取租赁费的单位名称为：中国水电十五局设备租赁公司。

汇款单位：

开户行：

帐号：

汇款单备注栏注： 设备租赁公司设备租赁款

第六条 保证金及租赁设备进出场费的承担

经甲、乙双方协商，甲方收取乙方保证金 元(大写：元人民币整)，及出场费 元(大写：人民币 元整)，共计人民币元整。作为履行本合同的保证。乙方交纳保证金后办理设备出场手续。租赁期间不得以保证金抵作租金。租赁期满，扣除应付租赁设备的缺损赔偿金后，保证金余额退还乙方。租赁设备使用期在六个月(含六个月)以内的进出场费由乙方承担(出场时，乙方只负责与进场相同运距的费用);租赁设备使用期在六个月以上，乙方负责设备进场费，甲方负责设备出场费。

第七条 租赁设备的交付和验收

1.租赁设备的交付地点为甲方设备所在地。

2.乙方应自收货时起24小时内在交货地点检查验收租赁设备，同时将签收盖章后的租赁设备的验收单交给甲方。

甲方：_________

住所：_________邮编：_________

法定代表人本人：_________联系电话：_________

身份证护照营业执照号码：_________

委托法定代理人：_________联系电话：_________

乙方：_________

住所：_________邮编：_________

法定代表人本人：_________联系电话：_________

身份证护照营业执照号码：_________

委托法定代理人：_________联系电话：_________

根据《中华人民共和国民法典》、《上海市房屋租赁条例》等法律法规，并结合《关于本市加强租赁厂房和场所的生产、消防、特种设备安全管理的意见》，甲、乙双方在平等、自愿、公平和诚实信用的基础上，经协商一致，就乙方承租甲方可依法出租的厂房事宜，订立本合同。

第一条出租厂房情况

1.1甲方出租给乙方的厂房座落在本市_________区县_________路_________弄_________号_________室_________。该厂房出租建筑面积使用面积为_________平方米，其平面图见本合同附件。

1.2甲方作为该厂房的房地产权利人授权委托人法律规定的其他权利人与乙方建立租赁关系。签订本合同前，甲方已向乙方出示该厂房的房地产权证产权单位委托出租的证明法律规定其他权利人证明，权证编号：_________并已告知乙方该厂房已未设定抵押。

1.3该厂房原规划设计的生产使用性质为_________其现有装修、有关设施设备状况、安全生产条件、防火等级，以及甲方同意乙方自行装修和改变技术工艺或生产设施的内容、标准及需约定的其它有关事宜，由甲、乙双方在本合同附件中加以列明。甲、乙双方同意该附件作为甲方向乙方交付该厂房和本合同终止时乙方向甲方返还该厂房的验收依据。

第二条租赁使用性质和生产用途

2.1甲方已查验乙方的营业执照、相应生产经营资质证书或者拟从事的生产经营范围。乙方向甲方承诺，租赁该厂房严格按照经核准的生产经营范围和该厂房原规划设计的生产使用性质，用于从事_________的产品生产。

2.2乙方保证，在租赁期内未征得甲方书面同意，或未按规定经安全生产监管、消防等有关部门批准，不擅自改变该厂房规划设计的生产使用性质，从事上款约定之外的其它产品生产经营活动。

第三条交付日期和租赁期限

3.1甲乙双方约定，甲方于_________年_________月_________日前向乙方交付该厂房和按本合同附件中约定的有关设施设备。租赁日期自_________年_________月_________日起至_________年_________月_________日止。

3.2租赁期满，乙方应如期返还该厂房和有关设施设备。乙方需继续承租的，则应于租赁期届满前_________个月，向甲方提出续租书面要求，经甲方同意后，双方应重新签订厂房租赁合同。

第四条租金、支付方式和限期

4.1甲、乙双方约定，该厂房每日每平方米建筑面积使用面积租金为_________元。月租金总计为_________元。。

4.2该厂房租金_________年月内不变。自第_________年月起，双方可协商对租金进行调整。有关调整事宜由甲、乙双方在补充条款中约定。

4.3乙方应于每月_________日前向甲方支付租金。逾期支付的，每逾期一日，则乙方需按日租金的_________%支付违约金。

4.4乙方支付租金的方式如下：_________。

第五条保证金和其他费用

5.1甲、乙双方约定，甲方交付该厂房时，乙方不向甲方支付厂房租赁保证金应向甲方支付厂房租赁保证金，保证金为_________个月的租金，即_________元，甲方收取保证金后应向乙方开具收款凭证。租赁关系终止时，甲方收取的厂房租赁保证金除用以抵充合同约定由乙方承担的费用外，剩余部分无息归还乙方。

5.2租赁期间，使用该厂房所发生的水、电、燃气、通讯、设备、物业管理、_________等费用由甲方乙方承担。其他有关费用，均由甲方乙方承担。

5.3甲方乙方承担的上述费用，计算或分摊办法、支付方式和时间：_________。

第六条厂房的使用要求

6.1甲、乙双方在签订本合同时，应根据安全生产法律、法规的要求以及《安全管理意见》第二、三、五条的规定，同时订立《安全生产管理协议》作为合同附件，明确租赁双方的生产、消防、特种设备安全管理职责。

6.2甲、乙双方约定，租赁期间，该厂房和有关设施设备有损坏或故障时，由甲方乙方负责维修，维修费用由甲方承担。由甲方维修的，甲方应在接到乙方通知后的_________日内进行维修。逾期不维修的，乙方可代为维修，维修后应及时将维修内容和费用凭证提交给甲方。由乙方维修的，乙方维修后，应及时将维修内容和费用凭证提交给甲方。

6.3租赁期间，乙方应合理使用并爱护该厂房和有关设施设备。因乙方使用不当或不合理使用，致使该厂房和有关设施设备损坏或发生故障的，其维修费用由乙方承担。

6.4租赁期间，甲、乙双方应根据《安全生产管理协议》的约定，保证该厂房及设施设备处于正常的可使用和安全的状态。甲方在履行安全管理职责，对该厂房进行检查时，乙方应予以配合。凡发现乙方存在安全生产隐患的，甲方有权书面告知乙方，责令乙方进行整改。

6.5乙方增设特种设备，或者另需装修、改变技术工艺或改造有关设施设备的，应事先征得甲方的书面同意。其中按规定必须报有关部门审批的，则还应由甲方甲方委托乙方报有关部门批准后，方可进行。

第七条厂房返还时的状态

7.1除甲方同意乙方续租外，乙方应在本合同的租期届满后的_________日内返还该厂房和有关设施设备，未经甲方同意逾期返还的，每逾期一日，乙方应按_________元/平方米向甲方支付占用期间的使用费。

7.2乙方返还该厂房和有关设施设备，应当符合正常使用后的状态。返还时，甲方根据合同附件的约定进行验收，并相互结清各自应当承担的费用。

第八条转租、转让和交换

8.1除甲方已在本合同补充条款中同意乙方转租外，乙方在租赁期内，须事先征得甲方的书面同意，方可将该厂房部分或全部转租给他人。

8.2乙方转租该厂房，应按规定与接受转租方签订书面的转租合同，并依据原签订的《安全生产管理协议》，由甲、乙双方与接受转租方签订《安全生产管理协议》。其中，甲方应承担的安全生产管理职责不因转租而改变。

8.3在租赁期内，乙方将该厂房转让给他人承租或与他人承租的厂房进行交换，必须事先征得甲方书面同意。转让或交换后，该厂房承租权的受让人或交换人应与甲方签订租赁主体变更合同并继续履行本合同及《安全生产管理协议》。

8.4在租赁期内，甲方如需出售该厂房，应提前3个月通知乙方。乙方在同等条件下有优先购买权。

第九条解除本合同的条件

9.1甲、乙双方同意在租赁期内，有下列情形之一的，本合同终止，双方互不承担责任：

该厂房占用范围内的土地使用权依法提前收回的。

该厂房因社会公共利益被依法征用的。

该厂房因城市建设需要被依法列入房屋拆迁许可范围的。

该厂房在租赁期内被鉴定为危险厂房，或者因不可抗力导致毁损、灭失的。

甲方已告知乙方该厂房出租前已设定抵押，现被处分的。

_________。

9.2甲、乙双方同意，有下列情形之一的，一方可书面通知另一方解除本合同。违反合同的一方，应向另一方按月租金的_________倍支付违约金给另一方造成损失，支付的违约金不足抵付损失的，还应赔偿造成的损失与违约金的差额部分：

甲方未按时交付该厂房和有关设施设备，经乙方催告后_________日内仍未交付的。

甲方交付的该厂房和有关设施设备不符合本合同的约定，致使不能实现租赁目的的或甲方交付的厂房和有关设施设备危及安全生产或存在消防等级缺陷的。

甲方发现乙方未按《安全生产管理协议》认真履行其管理职责，存在安全生产隐患，且书面告知乙方责令其整改，乙方整改不力或逾期拒不整改的。

乙方未征得甲方书面同意和相关部门的批准，擅自改变该厂房规划设计的生产使用性质，用于从事第二条第一款约定之外其它产品的生产经营活动的。

乙方未征得甲方书面同意和经安全生产监督、消防等有关部门的批准，即增设、改造特种设备，或者生产、经营、运输、储存、使用危险物品或处置废弃危险化学品的。

乙方未征得甲方书面同意，擅自转租该厂房、转让或与他人交换该厂房承租权的。

乙方逾期不支付租金累计超过_________月的。

_________。

第十条违约责任

10.1该厂房和有关设施设备交付时存在缺陷的，甲方应自交付之日起的日内进行修复。逾期不修复的，甲方同意减少租金并变更有关租金条款。

10.2因甲方未在该合同中告知乙方，该厂房前已抵押或产权转移已受到限制，造成乙方损失的，甲方应负责赔偿。

10.3非本合同规定的情况，甲方在租赁期间擅自解除本合同，提前收回该厂房的，甲方应按提前收回天数的租金的_________倍向乙方支付违约金。若支付的违约金不足抵付乙方损失的，甲方还应负责赔偿。

10.4租赁期间，根据本合同第六条的约定，甲方乙方不及时履行本合同约定的维修、养护责任，致使厂房和有关设施设备损坏，甲方乙方应承担赔偿责任。

10.5乙方未征得甲方书面同意或者超出甲方书面同意的范围和要求，擅自改变厂房建筑结构，违反有关技术标准和消防安全规定，进行电力线路等装修工程，改变技术工艺或生产设施的，甲方有权要求乙方恢复厂房和有关设施设备原状以及赔偿损失。

10.6非本合同规定的情况，乙方在租赁期间中途擅自退租的，乙方应按提前退租天数的租金的_________倍向甲方支付违约金。若违约金不足抵付甲方损失的，乙方还应负责赔偿。甲方可从租赁保证金中抵扣。保证金不足抵扣的，不足部分则由乙方另行支付。

第十一条解决争议的方式

11.1本合同受中华人民共和国法律、法规管辖。

11.2甲、乙双方在履行本合同过程中若发生争议，应协商解决协商解决不成的，双方同意选择下列第_________种方式解决：

提交上海仲裁委员会仲裁

依法向_________人民法院起诉。

第十二条其他条款

12.1租赁期间，甲方需将未抵押的厂房和有关设施设备抵押的，应当书面告知乙方，并向乙方承诺该厂房和有关设施设备抵押后当事人协议以折价、变卖方式处分该厂房前_________日书面征询乙方购买该厂房和有关设施设备的意见。

12.2本合同自双方签字签字后_________生效。生效后的15日内，甲方乙方甲、乙双方共同应负责按规定办理登记备案，领取房屋租赁合同登记备案证明，同时将《安全生产管理协议》报该厂房所在地街道办事处或镇人民政府备案。

12.3本合同经登记备案后，凡变更、终止本合同的，由甲方乙方负责在本合同变更、终止之日起的15日内，向原受理机构办理变更、终止登记备案手续。因甲方未办理房屋租赁合同登记备案或变更、终止登记备案的，所引起的法律纠纷，由甲方承担一切责任。其中，因合同变更，《安全生产管理协议》需作调整的，则应在调整后，按上款规定重新办理备案手续合同终止的，则应相应办理《安全生产管理协议》备案的注销手续。

12.4本合同未尽事宜，经甲、乙双方协商一致，可订立补充条款。本合同补充条款及附件均为本合同不可分割的一部分，本合同及其补充条款和附件内空格部分填写的文字与铅印文字具有同等效力。

12.5甲、乙双方在签署本合同时，对各自的权利、义务、责任清楚明白，并愿按合同规定严格执行。如一方违反本合同，另一方有权按本合同规定索赔。

12.6本合同连同附件一式_________份。其中：甲、乙双方各持一份，_________区县房地产交易中心或农场局受理处一份，以及_________各一份，均具有同等效力。

甲方：_________乙方：_________

甲方本人法定代表人：_________乙方本人法定代表人：_________

委托代理人签署：_________委托代理人签署：_________

_________年____月____日_________年____月____日

委托单位： (以下称甲方)

受托单位：(以下称乙方)

经办人：甲方 乙方：

本合同系经甲、乙双方共同协商，均无异议后签订，计为八条。

第一条 工程名称及地点：

第二条 工程范围：(除垢面积或容积)

第三条 质量标准：

除垢率大于90%，腐蚀率小于0.1g/m2.h，废液排放符合国家环保，水质稳定达到国家工业循环水标准，碳钢腐蚀率0.1g/a，铜腐蚀率0.05g/a。

第四条 工程造价共 元整。

第五条 清洗步骤：

根据冷却系统容水量和日补水量(冷却塔蒸发、飞溅、排污等损失量)计算总容水量：

1、如果条件许可，应停产一天，人工清理水池，彻底清除池内的沉积物。主机冷凝器须停机清洗。

2、拆卸进出管道法兰，连接变径法兰;

3、安装循环泵、软管、溶液箱使之和冷凝器形成一回路;

4、加入系列清洗剂进行循环清洗;

5、监测清洗剂的浓度变化，待浓度不变时，完成清洗;

6、恢复冷凝器端盖，注水试压。如下图：

7、首先确定系统无跑冒泄露处，分析污垢总量;

8、从冷却塔和水池加入粘泥剥离剂，进行杀菌灭藻，分离藻类;

9、从水池放入污水泵将粘泥抽出，排出池外;

10、根据水质情况，加入中性清洗剂进行循环清洗;

11、每七天排污一次，进行水质分析，排污率10%，排污后按比例补加清洗剂;

12、连续清洗20天，待化验数据符合清洗结束时，进行置换;

13、清洗完成后，蓄水循环加入水质稳定剂进行水质保养;

14、水质保养剂按每天的消耗水量(补水量)定期进行投加(一吨水加入250克);

15、定期进行水质化验，根据化验数据，随时调整药剂的投加量和排污量;

第六条 工程期限：自 年 月 日开工至 年 月 日竣工

第七条 本合同有效期限：本合同自双方签字后盖章后生效，预付款项50%。余额在清洗结束时付清。

第八条 本合同附件与本合同共有同等效力，本合同共四份，甲方收执三份，乙方收执一份。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

出让方：（甲方）

身份证号：

受让方：（乙方）

身份证号：

鉴于甲方在公司（以下简称公司）合法拥有 %股权，现甲方有意转让其在公司拥有的全部股权，并且甲方转让其股权的要求已获得公司股东会的批准。

鉴于乙方同意受让甲方在公司拥有 %股权。

鉴于公司股东会也同意由乙方受让甲方在该公司拥有的 %股权。

甲、乙双方经友好协商，本着平等互利、协商一致的原则，就股权转让事宜达成如下协议：

一、股权转让

1、甲方同意将其在公司所持股权，即公司注册资本的%转让给乙方，乙方同意受让。

2、甲方同意出售而乙方同意购买的股权，包括该股权项下所有的附带权益及权利，且上述股权未设定任何（包括但不限于）留置权、抵押权及其他第三者权益或主张。

3、协议生效之后，甲方将对公司的经营管理及债权债务不承担任何责任、义务。

二、股权转让价格与付款方式

1、甲方同意将持有 公司 %的股权共 万元出资额，以 万元转让给乙方，乙方同意按此价格及金额购买上述股权。

2、乙方同意在本合同订立日内以现金形式一次性支付甲方所转让的股权。

三、甲方声明

1、甲方保证所转让给乙方的股权是甲方在公司的真实出资，是甲方合法拥有的股权，甲方拥有完全的处分权。甲方保证对所转让的股权，没有设置任何抵押、质押或担保，并免遭任何第三人的追索。否则，由此引起的所有责任，由甲方承担。

2、甲方转让其股权后，其在公司原享有的权利和应承担的义务，随股权转让而转由乙方享有与承担。

四、乙方的陈述与保证

1、乙方为依法成立并合法存续的公司法人，具有独立民事行为能力；

2、乙方对本次受让甲方转让目标公司 %股权的行为已得到了有权机构的批准，并对目标公司的基本状况有所了解；

3、乙方保证其具有支付本次股权转让价款的能力；

4、乙方保证在其成为目标公司的股东后将进一步促进和支持该公司的发展。

五、股权转让有关费用的负担

双方同意办理与本合同约定的股权转让手续所产生的有关费用，由 方承担。

六、有关股东权利义务包括公司盈亏（含债权债务）的承受

1、从本协议生效之日起，乙方实际行使作为公司股东的权利，并履行相应的股东义务。必要时，甲方应协助乙方行使股东权利、履行股东义务，包括以甲方名义签署相关文件。

2、从本协议生效之日起，乙方按其所持股权比例依法分享利润和分担风险及亏损。

七、违约责任

1、甲、乙双方均需全面履行本合同约定的内容，任何一方不履行本合同的约定或其附属、补充条款的约定均视为该方对另一方的违约，另一方有权要求该方支付违约金并赔偿相应损失。

2、本合同的违约金为本次股权转让总价款的 %，损失仅指一方的直接的、实际的损失，不包括其他。

3、遵守合同的一方在追究违约一方违约责任的前提下，仍可要求继续履行本合同或终止合同的履行。

八、协议的变更和解除

发生下列情况之一时，可变更或解除本协议，但甲乙双方需签订变更或解除协议书：

1、由于不可抗力或由于一方当事人虽无过失但无法防止的外因，致使本协议无法履行；

2、一方当事人丧失实际履约能力；

3、由于一方违约，严重影响了另一方的经济利益，使合同履行成为不必要；

4、因情况发生变化，当事人双方经过协商同意；

5、合同中约定的其它变更或解除协议的情况出现。

九、争议的解决

双方应首先以协商方式解决因本合同引起或者与本合同有关的任何争议。如双方不能以协商方式解决争议，则双方同意将争议提交 仲裁委员会仲裁或者有管辖权的人民法院处理。

十、其他

本合同一式 份，双方各持 份， 存档 份，交有关机关备案 份，均具有同等法律效力。

出让方：

年 月 日

受让方：

年 月 日

承租方：________________________(以下简称乙方)

出租方：________________________(以下简称甲方)

甲、乙双方根据《中华人民共和国合同法》的有关规定，按照平等互利的原则，经过双方协商，就乙方向甲方承租设备特签订本合同。

一、机械设备名称、型号、数量、概况

____________________________________。

二、设备使用地点及工程项目

本租赁设备仅限于在___________________，用于_____________________工程。

三、租赁设备的所有权和使用权

1、甲方拥有租赁设备的所有权。

2、乙方仅在租赁期内在本合同规定的范围内拥有该租赁设备的使用权。

四、甲方为乙方配备该设备操作手______人，由乙方负责食宿，由______方负责该设备操作手工资。

五、租赁期限及租金结算方式

1、自________年______月______日至________年______月______日止，租赁期满，乙方将设备完好交给甲方办理退场手续，若乙方继续使用，应在本合同期满前五日内重新签定续租合同。

2、租赁期间原则上每天平均工作时间不超过8小时(折合一个台班)，每月累计不得超过______小时，确因工作所需超出______小时部分应视为加班，按超出工作小时数计收加班租赁费。

设备的租赁费按月租结算______元/月，______元/小时，如设备租赁期不足一个月，租赁费按实际天数乘以8小时结算，超出工作小时加班部分，另计收加班费。

3、经甲乙双方商定，甲方收取乙方设备保证金____________元，作为履行本合同的保证。

4、乙方向甲方交纳租金及保证金后，办理提货手续，自始租日起，每30天向甲方交付一次租金(每月提前五日付下月租金)，租赁期满后，甲方应将保证金余额退还乙方。

六、租赁设备的运输、使用、维修、保养和费用

1、设备的进场费由乙方负担，退场费由甲方负担，乙方应在设备退场前七天通知甲方(如果设备实际租赁不足一个月进退场费全由乙方承担)。

2、设备在租赁期间所需的各种油料由乙方负担。

3、设备在租赁期间内由乙方使用，乙方应协助甲方机手做好设备的日常维修、保养，使设备保持良好状态，维修费用在______元以下的由乙方负担，维修费用在______元以上的由甲方负担，所付费用以甲方机手签字为准，由甲方负担的部分从甲方收取设备租赁费中扣除。(易损件如叶片、链条、铰笼等费用由乙方承担)

4、在工作过程中，乙方若不能对设备故障进行排除，应及时通知甲方进行维修，设备因故障造成每月停工三天以上的部分乙方应扣除甲方相应天数乘以8小时的租赁费。

5、租赁过程中的安装、保管、使用所发生的一切费用，税款均由乙方承担。

七、甲方的义务

1、为乙方提供性能良好的设备。

2、设备进入乙方施工现场后，甲方机手应服从乙方施工现场管理人员的调度与指挥，并遵守乙方施工现场的规章制度。

3、甲方机手应按设备操作规程施工。

4、甲方机手应每日严格填写甲方单位派发的租赁机械施工表，每月或租期结束将此表交乙方单位签字盖章，并以此表计算租金。

八、乙方的义务

1、乙方负责设备在施工现场的看护并保证设备及甲方工作人员的安全，如因乙方原因造成设备的损坏、丢失，其损失由乙方赔偿。

2、乙方不得强迫甲方机手违章或超负荷作业。

3、在设备租赁期间，乙方应赔偿非甲方原因而造成的第三方的损失及因此而造成的甲方设备停机损失(如甲方设备被第三方扣押等)，乙方仍应按合同约定支付停机期间的日租金。

4、乙方应在交货地点检查验收租赁设备，同时将签收盖章后的`租赁设备的验收收据交给甲方。

九、违约责任

1、甲、乙双方必须严格履行本合同的各项条款，未经对方书面同意，任何一方不得中途变更或解除本合同。

2、在租赁期间，未经甲方书面同意，乙方不得在租赁设备上随意增加和扣除部件，不得以租赁设备进行转租或抵押，否则由此造成的损失由乙方承担赔偿责任。

3、若乙方未按合同规定期限支付租金或超期使用，甲方有权终止合同调回所租设备，每超一天乙方应向甲方正常交纳租金并加付月租金的5%作为违约金。

十、争议的解决

有关本合同的一切争议，甲、乙双方应根据《中华人民共和国合同法》及其它相关法律的有关条款友好协商解决，协商不成，应提交_______仲裁委员会，根据仲裁的有关程序进行仲裁裁决。诉讼费用和胜诉方的律师费用应由败诉方承担。

十一、未尽事宜，双方另行协商解决，本合同壹式_____份，甲乙双方各执___份，双方签字盖章并在甲方收到乙方月租或预付定金后生效。

承租方(乙方)：_________________出租方(甲方)：_______________

法定代表人：__________________法定代表人：_________________

委托代理人：__________________委托代理人：_________________

地址：________________________地址：________________________

电话：________________________电话：________________________

开户行：______________________开户行：_____________________

帐号：________________________帐号：________________________

税号：________________________税号：________________________

签字日期：______年____月____日签字日期：______年____月____日

甲方：___________________（买方企业名称）

乙方：___________________（卖方企业名称）

丙方：中国建设银行____________分（支）行

为支持我信设备生产，促进电信事业的发展，银企三方之间建立更加密切的合作关系，更好地开展通信设备买方信贷业务，三方本着自愿、平等、互利互惠的原则，经友好协商达成如下协议：

一、甲方根据甲乙双方签订的购销合同向丙方提出买方信贷申请，用于购买乙方____________________设备。丙方意向性同意向甲方发放____________万元买方信贷，期限____________年，丙方将按照建设银行规定程序审核后，对符合条件的发放贷款。

二、甲乙双方应及时、完整提供买方信贷业务中所需要的各种证明和资料。

三、丙方按照规定的申报审批程序进行审查、决策，贷款利率按照人民银行有关规定执行。

四、丙方提供贷款后，按照甲方付款指令按时将贷款划至乙方在主办行开立的账户。

五、甲方在丙方开立结算账户，并按照《贷款合同》的要求及时向丙方偿还贷款本息。

六、甲方、乙方遵守丙方关于买方信贷业务的有关规定，并遵照执行。

七、丙方优先为甲方、乙方提供结算网络、咨询、协调等全方面的金融服务。

八、其他未尽事宜，三方另行协商解决。

甲方：（盖章）__________

______年______月______日

乙方：（盖章）__________

______年______月______日

丙方：（盖章）__________

______年______月______日