技术加资金入股合作协议书范本精选20篇

技术合同：技术服务协议

委托方(以下称甲方)：_________

法定代表人或负责人：_________

服务方(以下称乙方)：_________

法定代表人或负责人：_________

甲乙双方为携手合作，促进发展，满足利益，明确责任，依据中华人民共和国有关法律之相关规定，本着诚实信用、互惠互利原则，结合双方实际，协商一致，特签订本合同，以求共同恪守：

第一条 项目名称_________。

第二条 服务内容、方式和要求

1.服务内容：_________。

2.方式：_________。

3.要求：_________。

第三条 工作条件：_________。

第四条 报酬及其支付方式：

1.本项目报酬(服务费或培训费)：_________元。

服务方完成专业技术工作，解决技术问题需要的经费，由_________方负担。

2.本项目中介方活动经费为：_________元，由_________方负担。中介方的报酬为：_________元，由_________方支付。

3.支付方式为如下第_________种：

(1)合同生效后_________日内向乙方支付报酬总额的_________%;

(2)合同履行完成后(验收合格之日起)_________日内甲方向乙方支付全部报酬余额。

(3)其它方式：_________。

第五条 声明及保证

甲方：

1.甲方为一家依法设立并合法存续的企业，有权签署并有能力履行本合同。

2.甲方签署和履行本合同所需的一切手续均已办妥并合法有效。

3.在签署本合同时，任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对甲方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.甲方为签署本合同所需的内部授权程序均已完成，本合同的签署人是甲方的法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

乙方：

1.乙方为一家依法设立并合法存续的企业，有权签署并有能力履行本合同。

2.乙方签署和履行本合同所需的一切手续均已办妥并合法有效。

3.在签署本合同时，任何法院、仲裁机构、行政机关或监管机构均未作出任何足以对乙方履行本合同产生重大不利影响的判决、裁定、裁决或具体行政行为。

4.乙方为签署本合同所需的内部授权程序均已完成，本合同的签署人是乙方的法定代表人或授权代表人。本合同生效后即对合同双方具有法律约束力。

第六条 甲方的主要义务

1.在合同生效后_________日内向乙方提供下列技术资料、数据、材料、样品：

_________。

2.在接到乙方关于要求改进或更换不符合合同约定的技术资料、数据、材料、样品的通知后_________天内及时做出答复;

3.按约向乙方支付报酬，乙方开户银行帐户为_________。

4.协助乙方完成下列配合事项：

_________。

第七条 乙方的主要义务

1.在_________年_________月_________日前完成技术服务工作;

2.依照下列技术经济指标完成技术服务工作：_________;

3.发现甲方提供的技术资料、数据、样品、材料或工作条件不符合合同约定时，应在合同生效后_________天内通知委托方改进或者更换;

4.应对甲方交给的技术资料、样品等妥善保管;在合同履行过程中，如发现继续工作对材料、样品或设备等有损坏危险时，应中止工作，并及时通知委托方;工作完成后应归还上述技术资料、样品，不得擅自存留复制品。

第八条 保密条款

双方保证对从另一方取得且无法自公开渠道获得的商业秘密(技术信息、经营信息及其他商业秘密)予以保密。未经该商业秘密的原提供方同意，一方不得向任何第三方泄露该商业秘密的全部或部分内容。但法律、法规另有规定或双方另有约定的除外。保密期限为_________年。

一方违反上述保密义务的，应承担相应的违约责任并赔偿由此造成的损失。

第九条 技术成果收益归属

在履行本合同中，乙方利用甲方提供的技术资料和工作条件完成的新的技术成果，属于乙方所有。(注：当事人还可以有其他不同的约定)

第十条 甲方的违约责任

1.甲方未按照合同约定提供有关技术资料、数据、样品和工作条件，影响工作质量和进度的，应当如数支付报酬。逾期二个月不提供约定的物质技术条件，乙方有权解除合同，甲方应当支付数额为报酬总额_________%的违约金。

2.甲方迟延支付报酬，应当支付数额为报酬总额_________%的违约金，逾期二个月不支付报酬或者违约金的，应当交还工作成果，补交报酬，支付数额为报酬总额_________%的违约金。

3.甲方迟延接受工作成果的，应支付数额为报酬总额_________%的违约金和保管费。逾期二个月不领取工作成果的，乙方有权变卖、处理工作成果，从获得的收益中扣除报酬、违约金和保管费后，剩余部分返还甲方，所获得的收益不足抵偿报酬、违约金和保管费的，有权请求甲方赔偿损失。

共3页，当前第1页123

课程授权使用合作契约书

兹有《_________》，_________（甲方）设计发展之_________课程授权_________（乙方）使用，双方订定合作契约如下：

一、《_________》系_________公司经营之教育品牌，所有关系《_________》之权利义务均由_________公司概括行使及承受。

二、本课程属甲方智能财产，非经甲方同意，不得复制、转让、改作。

三、本课程仅授权乙方于下列营业点不限次数、不限人数使用：_________省/县/市_________乡/镇/区_________（街道门牌），乙方其它地点之分支机构如需使用本课程，须另立合作契约。

四、甲方保证在乙方指定之_________省/县/市_________乡/镇/区_________国中/国小学区仅授权（独家不超过_________家）业者使用本课程开班授课。

五、本合约有效期间自签约日起至_________年_________月_________日止。

六、费用标准：主要分二大类：

1、授权费：（以单一营业点为单位）

（1）保证金：_________元（赠送_________，期末九月底全额退还，加订_________课程者免缴保证金）。

（2）教师研习费：_________（四人次），乙方如选择派师可免缴教师研习费。

（3）专用网站租金：_________元（租期至_________年_________月_________日）。奖励绩优业者，乙方单级累积招生满_________名时甲方退还实缴网站租金。

2、学费：（按注册学生人数收取，业者自行参考定价决定实际优惠折扣）

（1）注册费：定价_________元，（第一级_________元，第二、三级各_________元），向业者实收_________元（第一、二、三级各_________元），主要用在个人网络帐号开设、建置、维护及课程辅导。

（2）教材费：按定价向业者实收6折，内含学生手册、三级共二十四单元教材、实作教具、书包、爱因斯坦汗衫、国际授权费等。教材定价依甲方网站公布价格为准。

（3）课程辅导费：定价_________元/单元，全数归乙方所得。

七、优惠办法：

1、保证金：加订_________课程者免缴保证金。

2、专用网站租金：具备各省县市补（社）教协会会员资格者，享_________元退费优惠，缴费后该笔退费经各合作协会审核会员资格无误后，由甲方退还予乙方。

八、教材由乙方自行视需要批次订购，一次订购满_________元者运费由甲方负担，不足_________元者运费由乙方负担。期末教材未售完者可办理退费，_________件以下按批发价全额退费，逾3件以上，每多1件扣1折，退货运费由乙方负担。订购时请在划拨单背面注明订购数量及配送地址及收件人，并请提前二周订购。

九、乙方有权经销甲方课程教材予未参加授权课程之学生，其定价及申购办法如上述相关规定。

十、乙方须保证至少招收五名学生，如全期未达此标准，保证金不予退还。

十一、乙方须自备宽频上网设施及一台以上多媒体计算机及扫瞄器、打印机（或多功能事务机），及相关耗材。

十二、乙方采用本课程授课期间，如肇生任何意外事故，除可直接归责于甲方教材教具设计缺陷或疏失者外，甲方不负其它连带责任。

十三、甲方配送乙方之教材教具如有缺损，甲方须负责补送。

十四、乙方如要求甲方派遣教师支持教学，相关办法如下：

1、派师费用每单元收费_________元，包含教师钟点费、意外保险费、及车马费，乙方须按课程等级在期初一次预缴_________单元费用。

共3页，当前第1页123

翻译合作合同

本合同由以下双方签订：

甲方：_________________

住所地：_______________

乙方：_______________

住所地：_______________

双方经平等协商，一致达成如下协议。

第1条定义 本合同有关用语的含义如下：

1.1 甲方：_______________

1.2 乙方：_______________

1.3 用户：指接受或可能接受_____公司服务的任何用户。

1.4 信息：指乙方按本合同向甲方提供并许可使用译文。

第2条业务内容及价格

2.1 甲方要求乙方将委托之文件翻译为_____（语种）。

2.2 翻译：甲方应向乙方支付劳务费用，由_____翻译为_____（语种），收费标准为译后的每千中文字符数（电脑统计，不计空格为准）_____元人民币；其他语种翻译另议。

2.3 支付时间：_____

第3条提供译文

3.1乙方 同意按甲方书面要求之日期完成其委托翻译之任务。

3.2乙方应将译文于_____交给甲方。

3.3乙方按照乙方制定的质量翻译标准进行翻译作业，此质量翻译标准为鉴定译文品质之唯一标准。

3.4乙方有义务在甲方书面或电子邮件通知后对译文所出现的错误进行及时免费修改。

3.5 乙方将提供甲方一份电子翻译文件和书面翻译文件，并盖乙方翻译章。

第4条许可使用译文

4.1 乙方许可甲方利用译文制作成各式文档公开登载和展示。

4.2 乙方与甲方协商后决定是否标注译文的作者。

第5条免责

5.1 甲方的用户可以免费使用译文，并可对译文进行复制或修改编译。用户或第三方以任何方式对译文进行使用、修改、演绎、下载或转载，乙方的所有者均不对包括许可方在内的任何人承担任何责任。

第6条陈述与保证

6.1 双方保证其具有签订和履行本合同的权利和能力。

6.2 甲方保证译文由甲方的用户使用。

6.3 甲方保证译文的著作权人（如甲方不是信息的著作权人）同意其签订和履行本合同并不要求乙方的所有者支付任何费用，乙方可要求许可方就此提供译文的著作权人签署的文件。

6.4 乙方保证其向甲方提供的译文的及时性、完整性、合法性、真实性和准确性。

6.5 甲方保证乙方使用其译文的信息不构成对第三方任何权利的侵犯，同时甲方保证其签订、履行本合同不构成对第三方的违约或对第三方任何权利的侵犯，亦不会使乙方的所有者对任何第三方承担任何责任。

6.6 因甲方提供译文造成的对任何第三方的侵权，包括但不限于侵犯第三方的著作权，由甲方负责解决。

第7条期限

7.1本合同有效期为，即自_____年_____月_____日起至_____年_____月_____日止。合同到期后自行终止.

第8条违约责任

8.1 任何一方不履行、不完全履行、不适当、不及时履行本合同，另外一方有权要求对方按约定履行本合同或解除本合同，并要求对方赔偿相应的损失。

8.2 任何一方由于不可抗力导致不能履行、不能完全履行本合同，就受不可抗力影响部分不承担违约责任，但法律另有规定的除外，受不可抗力影响的一方应及时通知对方，以减轻可能给对方造成的损失，并应当在合理期限内提供相关证明。

第9条 保密

9.1未经甲方许可，乙方不得向第三方泄露本合同的条款的任何内容以及本合同的签订和履行情况，以及通过签订和履行本合同而获知的对方及对方关联公司的任何信息。

共2页，当前第1页12

B类资金信托合同（普通受益类）

“信托收益”：指各类信托合同的受益人根据信托计划和相应的资金信托合同的规定所享有的相应收益。各类信托合同项下的信托收益，根据信托计划和相应的资金信托合同的规定计算并确定。

“总信托收益”：受托人根据信托文件的规定，集合管理、运用、处分信托计划资金过程中产生的信托利益，减去信托计划资金后的余额。

“信托受益权”：指本信托计划项下之各类信托受益人享有的本信托计划和相应各类信托合同所规定的，包括但不限于信托收益权和信托财产分配权等在内的信托权益的总称。

“a类信托合同”：本信托计划信托合同的类型之一，即《_________资金信托计划a类资金信托合同（优先受益类）》。该类合同的受益人根据本信托计划及其信托合同享有优先信托收益权等信托权益。享有该类合同信托受益权的a类信托合同受益人，称为优先受益人。

“优先信托收益权”：仅指a类信托合同受益人根据本信托计划和a类信托合同的规定，享有的请求分配信托收益的权利。本信托计划项下总信托收益，将优先用于支付优先信托收益权项下的信托收益。

“b类信托合同”：本信托计划信托合同的类型之一，即《_________资金信托计划b类资金信托合同（普通受益类）》。该类合同的受益人根据本信托计划和其信托合同的规定享有普通信托收益权和信托财产普通分配权等信托权益。享有该类合同信托受益权的b类信托合同受益人，称为普通受益人。

“普通信托收益权”：仅指b类信托合同受益人在优先受益人的优先信托收益权得到满足后，总信托收益若仍有剩余时，按照本信托计划和b类信托合同的规定，享有先于特定受益人请求分配信托收益的权利。

“信托财产普通分配权”：仅指b类信托合同受益人所享有的信托财产分配权，即根据本信托计划和b类信托合同的规定，享有先于特定收益人分配信托财产的权利。

“c类信托合同”：本信托计划信托合同的类型之一，即《_________资金信托计划c类资金信托合同（特定受益类）》。该类合同的受益人根据本信托计划和其信托合同的规定享有特定信托收益权和信托财产特定分配权等信托权益。享有该类合同信托受益权的c类信托合同受益人，称为特定受益人。

“特定信托收益权”：仅指c类信托合同受益人所享有的，在优先受益人的优先信托收益权和普通受益人的普通信托收益权均得到满足后，总信托收益若仍有剩余时，对剩余部分之信托收益的分配请求权。

“信托财产特定分配权”：仅指c类信托合同受益人所享有的信托财产分配权，即根据本信托计划和c类信托合同的规定，在普通受益人的信托财产普通分配权得到满足后，享有分配剩余信托财产的权利。

“委托人”：指与受托人签订相应类型的资金信托合同，并向受托人交付信托资金的投资人。在本合同中，除非另有述明，专指本合同列明的委托人。

“受托人”：指根据信托文件的规定，接受委托人的委托，以集合方式管理和运用委托人的信托资金的信托投资公司。在本信托计划中，指国际信托投资有限公司。

“受益人”：指根据委托人与受托人所签订的资金信托合同的规定，享有信托受益权的人。本合同的受益人与本合同的委托人为同一人。

共9页，当前第2页123456789

科技部技术服务合同范本

随着计算机的发展，系统维护工作在整个系统中常常被忽视。那么科技部技术服务合同应该如何签订呢？以下是小编为大家整理的科技部技术服务合同范本，感谢您的阅读。

合同编号：

技术服务合同

项目名称：___________________________________________

委托方(甲方)：____________________________________

受托方(乙方)：___________________________________

签订时间：___________________________________________

签订地点：___________________________________________

有效期限：___________________________________________

中华人民共和国科学技术部印制

填写说明

一、本合同为中华人民共和国科学技术部印制的技术咨询合同示范文本，各技术合同登记机构可推介技术合同当事人参照使用。

二、本合同书适用于一方当事人(受托方)为另一方(委托方)就特定技术项目提供可行性论证、技术预测、专题技术调查、分析评价报告所订立的合同。

三、签约一方为多个当事人的，可按各自在合同关系中的作用等，在“委托方”、“受托方”项下(增页)分别排列为共同委托人或共同受托人。

四、本合同书未尽事项，可由当事人附页另行约定，并可作为本合同的组成部分。

五、当事人使用本合同书时约定无需填写的条款，应在该条款处注明“无”等字样。

六、中山大学对外签署技术合同，必须由中山大学法人(校长)或其委托代理人(社科处领导)审核合同内容并签署。

七、合同文本最后页的“认定事项”部分，由技术合同认定登记部门填写并加盖公章，作为技术合同认定登记的凭证。

八、合同文本要求按规定格式打印，大小为A4幅面(高297毫米，宽210毫米)，竖装。左边为装订边，正文内容所用字型应不小于5号字，合同正本中所涉及与本合同约定事项有关的技术资料及其指定附件备齐后应合装成册，其规格大小应与合同书一致。

九、合同经签约双方法人(委托代理人)签署、盖章后，需交合同原件一式6份至社科处，以便社科处代办合同登记、申请减免科技收入税收事宜。如项目负责人未按本说明的有关要求办理填写合同事宜或自行签订项目合同，该项目涉及法律问题及由税局征收的营业税、所得税等费用，由课题负责人自行承担。

技术服务合同

委托方(甲方)：__________________________________________住所地：____________________________________________法定代表人：____________________________________________项目联系人：____________________________________________联系方式

通讯地址：______________________________________________电话：______________传真：_________

电子信箱：______________________________________________受托方(乙方)：XX大学

住所地：广州市新港西路135号

项目联系人：____________________________________________

联系方式

通讯地址：______________________________________________电话传真：___________________________

电子信箱：______________________________________________

本合同甲方委托乙方就___________________________________项目进行务，并支付相应的技术服务报酬。双方经过平等协商，在真实、充分地表达各自意愿的基础上，根据《中华人民共和国合同法》的规定，达成如下协议，并由双方共同恪守。

第一条甲方委托乙方进行技术服务的内容如下：

1.技术服务的目标：______________________________________________________________________________________.

2.技术服务的内容：______________________________________________________________________________________.

3.技术服务的方式：_____________________________________________________.

第二条乙方应按下列要求完成技术服务工作：

1.技术服务地点：____________________________________;

2.技术服务期限：____________________________________;

3.技术服务进度：

_______________________________________________________________________________;

4.技术服务质量要求：_________________________________;

5.技术服务质量期限要求：___________________________.

第三条为保证乙方有效进行技术服务工作，甲方应当向乙方提供下列工作条件和协作事项：

1.提供技术资料：

(1)_________________________________________________;

(2)_________________________________________________;

(3)_________________________________________________;

(4)_______________________________________________.

2.提供工作条件：

(1)_________________________________________________;

(2)_________________________________________________;

(3)_________________________________________________;

(4)_______________________________________________.

3其他：________________________________________________.

甲方提供上述工作条件和协作事项的时间及方式：___

第四条甲方向乙方支付技术服务报酬及支付方式为：

1.技术服务费总额为：_____________ ________________

2.技术服务费由甲方_______________(一次或分期)支付乙方。

具体支付方式和时间如下：

(1)_______________________________________________;

(2)________________________________________________;

(3)______________________________________________.

乙方开户银行名称、地址和帐号为：

收款单位帐号：第五条双方确定因履行本合同应遵守的保密义务如下：

甲方：

1.保密内容(包括技术信息和经营信息)：____________________________________________.

2.涉密人员范围：___________________________________

3.保密期限：_______________________________________.

4.泄密责任：______________________________________________________.

乙方：

1.保密内容(包括技术信息和经营信息)：________________________.

2.涉密人员范围：____________________________________________.

3.保密期限：________________________________________________.

4.泄密责任：_______________________________________________.

第六条本合同的变更必须由双方协商一致，并以书面形式确定。但有下列情形之一的，一方可以向另一方提出变更合同权利与义务的请求，另一方应当在日内予以答复;逾期未予答复的，

视为同意：

1._______________________________________________;

2._______________________________________________;

3._______________________________________________;

4._______________________________________________.

第七条双方确定，按以下标准和方式对乙方提交的技术服务工作成果进行验收：

1.乙方完成技术服务工作的形式：____________________________________________________.

2.技术服务工作成果的验收标准：__________________________________________.

3.技术服务工作成果的验收方法：_______________________________.

4.验收的时间和地点：___________________________________________________.

第八条双方确定：

1.在本合同有效期内，甲方利用乙方提交的技术服务工作成果所完成的新的技术成果，归____(甲，双)方所有。

2.在本合同有效期内，乙方利用甲方提供的技术资料和工作条件所完成的新的技术成果，归____(乙，双)方所有。

第九条双方确定，按以下约定承担各自的违约责任：______方违反本合同第条约定，应当________________________(支付违约金或损失赔偿额的计算方法)。

2.______方违反本合同第________________________(支付违约金或损失赔偿额的计算方法)。

3.______方违反本合同第条约定，应当______________________(支付违约金或损失赔偿额的计算方法)。

4. ______方违反本合同第_________________________(支付违约金或损失赔偿额的计算方法)。

第十条双方确定，在本合同有效期内，甲方指定______为甲方项目联系人，乙方指定____________为乙方项目联系人。项目联系人承担以下责任：

1.______________________________________________;

2.______________________________________________;

3.______________________________________________.

一方变更项目联系人的，应当及时以书面形式通知另一方。未及时通知并影响本合同履行或造成损失的，应承担相应的责任。

第十一条双方确定，出现下列情形，致使本合同的履行成为不必要或不可能，可以解除本合同：

1.发生不可抗力;

第十二条双方因履行本合同而发生的争议，应协商、调解解决。协商、调解不成的，确定按以下第种方式处理：

1.提交仲裁委员会仲裁;

2.依法向人民法院起诉。

第十三条双方确定：本合同及相关附件中所涉及的有关名词和技术术语，其定义和解释如下：

1._________________________________________________;

2._________________________________________________;

3._________________________________________________;

4._________________________________________________;

5._______________________________________________.

第十四条与履行本合同有关的下列技术文件，经双各方以__________________方式确认后，为本合同的组成部分：

1.技术背景资料：_________________________________;

2.可行性论证报告：_______________________________;

3.技术评价报告：_________________________________;

4.技术标准和规范：_______________________________;

5.原始设计和工艺文件：___________________________;

6.其他：_________________________________________.

第十五条双方约定本合同其他相关事项为：

___________________________________________________________

___________________________________________________________

___________________________________________________________

___________________________________________________________

_________________________________________________________.

第十六条本合同一式份，具有同等法律效力。

第十七条本合同经双方签字盖章后生效。

甲方:__________________________________________(盖章)

法定代表人/委托代理人:_________________________(签名)

_______________________________________年___月____日

乙方:__________________________________________(盖章)

法定代表人/委托代理人:_________________________(签名)

______________________________________年___月____日

专有技术转让合同文本

合同号：_________

合同目录

第一条 定义

第二条 合同范围

第三条 合同价格

第四条 支付条件

第五条 技术资料的交付

第六条 技术服务和人员培训

第七条 考核和验收

第八条 保证和索赔

第九条 侵权和保密

第十条 税费

第十一条 不可抗力

第十二条 争议的解决

第十三条 合同生效及其他

第十四条 法定地址

附件

附件一合同产品的名称、型号、规格和技术参数(略)

附件二技术资料的内容，数量和交付计划(略)

附件三合同产品的考核程序和验收标准(略)

附件四出让方技术服务的内容和要求(略)

附件五受让方人员培训的内容和要求(略)专有技术转让合同文本

附件六出让方银行出具的不可撤销的保函格式(略)

附件七受让方银行出具的不可撤销的保函格式(略)

中国，_________公司(以下简称“受让方”)为一方，_________国_________市_________公司(以下简称“出让方”)为另一方;

鉴于出让方拥有设计、制造、安装、销售_________产品的专有技术;

鉴于出让方有权，并且也同意向受让方转让上述专有技术;

鉴于受让方希望利用出让方的专有技术设计、制造、销售和出口_________产品;

双方授权代表通过友好协商，同意就以下条款签订本合同。

第一条 定义

1.1 “受让方”——是指中国_________公司，或者该公司的法人代表，代理和财产继承者。

1.2 “出让方”——是指_________国_________公司，或者该公司的法人代表，代理和财产继承者。

1.3 “合同产品”——是指本合同附件一中所列的产品及其型号和规格。

1.4 “技术资料”——是指本合同附件二中所列的全部技术数据、图纸、设计、计算、操作、维修、产品检验等资料。

1.5 “合同工厂”——是指受让方使用出让方提供的技术资料进行生产合同产品的场所，即_________省_________市_________工厂。

1.6 “净销售价”——是指合同产品的销售发票价格和除包装费、运输费、保险费、佣金、商业折扣、税金和外购件等的费用后的余额。

1.7 “技术服务”——是指出让方根据本合同附件四和附件五中的规定，就合同产品的设计、制造、装配、检验、调试、操作等工作，向受让方提供的技术指导和技术培训。

1.8 “商业性生产”——是指本合同工厂生产第_________台合同产品以后的生产。

1.9 “合同生效日期”——是指合同的双方政府有关当局中的最后一方批准合同的日期。……(注：可根据具体项目的需要增减上述定义)专有技术转让合同文本

第二条 合同范围

2.1 出让方同意向受让方转让，受让方同意从出让方取得合同产品的设计、制造、销售、安装、维修和专有技术。合同产品的型号、名称、规格和技术参数详见本合同附件一。

2.2 出让方承认受让方在中华人民共和国境内设计和制造合同产品，以及使用、销售和出口的权利。这种权利是非独占的，不可转让的权利。

2.3 出让方负责向受让方提供合同产品有关的专有技术和技术资料，某具体内容、数量和交付时间详见本合同附件二。

2.4 出让方负责派遣技术人员来华讲解技术资料，并对合同产品的设计、制造、装配、检验、考核等进行技术指导和服务，技术服务的内容和要求详见本合同附件四。

技术合同：农产品种植技术服务合同

合同(contract)，又称为契约、协议，是平等的当事人之间设立、变更、终止民事权利义务关系的协议。下面请看“技术合同：农产品种植技术服务合同”一文：

技术合同：农产品种植技术服务合同

甲方：_________

乙方：_________

本农产品种植技术服务合同由上列各方于_________年_________月_________日在_________订立(本合同适用于_________地区引种_________株以上、建立成规模种植基地_________亩以上的客户)。

双方经协商一致，达成农产品种植技术服务合同，合同如下：

第一条 甲方向乙方提供二年嫁接种苗共_________株、其中_________株、_________株、_________株，单价_________元，总价_________元，_________提货。

第二条 甲方每年举办三次技术班，乙方可选派_________人免费参加。培训内容包括：栽种、育苗、剪枝、病虫害防治、田间管理、加工等。食宿、交通由乙方自理。

第三条 甲方设专家热线，由著名专家免费提供技术咨询。

第四条 乙方有重大技术难题，甲方可派专家现场免费指导解决。差旅费由乙方承担。

第五条 技术服务费：每亩_________元/年。年技术服务费合同签订时即付。合同期限：_________年，自_________年_________月_________日至_________年_________月_________日。

第六条 陈述和保证

6.1 甲方的陈述和保证。甲方向各方陈述和保证如下：

(1)品种纯正;

(2)苗株平均80公分;

(3)检疫手续齐全;

(4)均系二年生秋季嫁接种苗;

(5)按技术规范种植，成活率80%以上;

(6)包三年挂果、五年盛果。

(7)其是一家依法设立并有效存续的有限责任公司;

(8)其有权进行本合同规定的交易，并已采取所有必要的公司行为授权签订和履行本合同;

(9)本合同自签定之日起对其构成有约束力的义务。

6.2 乙方的陈述和保证。乙方向各方陈述和保证如下：

(1)其是一家依法设立并有效存续的有限责任公司;

(2)其有权进行本合同规定的交易，并已采取所有必要的公司行为授权签订和履行本合同;

(3)本合同自签定之日起对其构成有约束力的义务。

第七条 违约责任

7.1 甲方的责任

(1)如甲方未能履行保证义务，乙方有权要求索赔。不符前四项，由甲方按种苗价的一倍予以补偿;不符第五项，由甲方按缺苗实数补齐_________%额(乙方以死苗株为据)。不符第五项，如确因甲方过错，甲方每亩一次性赔偿_________元。

(2)如果甲方违反其在本合同中所作的陈述、保证或其他义务，而使乙方遭受损失，则乙方有权要求甲方予以赔偿。

7.2 乙方的责任

(1)如果乙方违反本合同未支付服务费，则按逾期天数每天罚款_________元给甲方。但无论如何，罚款金额不超过应付技术服务费金额的_________%;

(2)如果乙方违反其在本合同中所作的陈述、保证或其他义务，而使甲方遭受损失，则甲方有权要求乙方予以赔偿。

第八条 保密

一方对因本次农产品种植技术服务而获知的另一方的商业机密负有保密义务，不得向有关其他第三方泄露，但中国现行法律、法规另有规定的或经另一方书面同意的除外。

第九条 补充与变更

本合同可根据各方意见进行书面修改或补充，由此形成的补充协议，与合同具有相同法律效力。

第十条 不可抗力

任何一方因有不可抗力致使全部或部分不能履行本合同或迟延履行本合同，应自不可抗力事件发生之日起三日内，将事件情况以书面形式通知另一方，并自事件发生之日起三十日内，向另一方提交导致其全部或部分不能履行或迟延履行的证明。

第十一条 争议的解决

本合同适用中华人民共和国有关法律，受中华人民共和国法律管辖。

本合同各方当事人对本合同有关条款的解释或履行发生争议时，应通过友好协商的方式予以解决。如果经协商未达成书面协议，则任何一方当事人均有权向有管辖权的人民法院提起诉讼。

第十二条 生效条件

本合同自双方的法定代表人或其授权代理人在本合同上签字并加盖公章之日起生效。各方应在合同正本上加盖骑缝章。

本合同一式_________份，具有相同法律效力。各方当事人各执_________份，其他用于履行相关法律手续。

甲方(盖章)：_________ 乙方(盖章)：_________

代表人(签字)：_________ 代表人(签字)：_________

甲方技术代表(签字)：_________ 乙方技术代表(签字)：_________

农业技术服务合同

甲方：_________

乙方：_________

为了发展农村商品生产，提高_________生产的技术水平，提高经济效益，经甲乙双方充分协商，特签订本合同，以便双方共同遵守。

一、应甲方邀请，乙方到甲方居住地传授_________生产的技术，合同期限为_________年_________月，即从_________年_________月_________日起至_________年_________月_________日止。

二、至合同期满，乙方保证甲方达到如下技术水平：_________。

三、甲方负责提供乙方传授_________生产技术所必需的资金_________元，提供生产设备_________，保障_________原料的及时供应.甲方应严格服从乙方的技术指导。

四、在合同执行期间，甲方每月付给乙方报酬_________元，按月结算(或合同期届满统一结算)。乙方的食宿由甲方负责安排，费用由_________方负担。

五、合同期届满，如乙方的传授指导没有达到合同规定的技术要求，除退回甲方付给的报酬，赔偿甲方的一切损失外，还应向甲方偿付违约金_________元。如乙方中止执行合同，除应赔偿甲方的一切费用支出外，应向甲方偿付违约金_________元。如甲方不按合同规定的时间付给乙方报酬，迟付一日，应按迟付金额的_________%偿付给乙方违约金.如甲方中止执行合同，应付给乙方合同期内的全部报酬。

六、合同生效后，任何一方不得任意变更或解除合同，合同中如有未尽事宜，须经甲乙双方共同协商，作出补充规定，补充规定与本合同具有同等效力。

七、如遇人力不可抗拒的灾害造成合同无法履行时，由双方协商解决。

八、其他：_________。

本合同正本一式两份，甲乙双方各执一份。(如经过公证)_________各留存一份。

甲方(签章)：_________ 乙方(签章)：_________

_________年____月____日 _________年____月____日

技术培训合同书

委托方：_________

法定代表人或负责人：________

服务方：_______

法定代表人或负责人：_________

根据《中华人民共和国合同法》的有关规定，经双方当事人协商一致，签订本

合同。

第一条 项目名称________。

(注：本参考格式适用于下列技术服务活动：进行设计、工艺、制造、试验以

及农作物育种，畜禽的饲养等方面的技术指导、讲解技术资料、解决和解答技术问

题;进行示范操作;传授计算机软件的编制技术、先进仪器设备的装配，使用技术

等等。)

第二条 培训的内容和要求：_______。

第三条 培训计划、进度、期限：_______。

第四条 培训地点和方式：____________。

第五条 服务方(教师)的资历和水平：________。

第六条 学员的人数和质量：___________。

第七条 教员、学员的食宿、交通、医疗费用的支付和安排____。

第八条 报酬及其支付方式：__________。

第九条 委托方的违约责任：_________。

1.委托方未按合同提供培训条件，影响合同履行的，约定的报酬仍应如数支

付;

2.擅自将服务方要求保密的技术资料引用、发表和提供给第三方，应支付数

额为____的违约金;

第十条 服务方的违约责任：

1.服务方未按合同制订培训计划，影响培训工作质量的，应当减收___%

的报酬;

2.服务方提供的师资不符合合同要求，服务方有义务予以重新配备;未按合

同规定完成培训工作的，应免收报酬。

第十一条 保密条款：________

当事人双方应对下列技术资料承担保密义务：______。

第十二条 有关技术成果归属条款

在履行合同过程中，服务方利用委托方提供的技术资料和工作条件所完成的新

的技术成果，属于服务方;委托方利用服务方的工作成果所完成的新技术成果，属

于委托方。对新的技术成果享有就该技术成果取得的精神权利(如获得奖金、奖章、

荣誉证书的权利)、经济权利(如专利权、非专利技术的转让权，使用权等)和

其它利益。

第十三条 本合同争议的解决办法：______。

本合同自双方当事人签字、盖章后生效。

委托方负责人(或授权代表) 服务方负责人(或授权代表)

签字：_______(盖章) 签名：________(盖章)

签字时间：_________ 签字时间：_________

签字地点：_________ 签字地点：_________

开户银行：_________ 开户银行：_________

帐号：___________ 帐号：___________

委托方担保人(名称)：___ 服务方担保人(名称)：___

地址：___________ 地址：___________

负责人(或授权代表) 负责人(或授权代表)

签字：________(盖章) 签字：________(盖章)

签字时间：_________ 签字时间：_________

签字地点：_________ 签字地点：_________

开户银行：_________ 开户银行：_________

帐号：___________ 帐号：___________

电子图书合作协议

甲方（著作权人）：_________

身份证号：_________

住址：_________

邮编：_________

电话：_________

传真：_________

联系人：_________

乙方：_________

地址：_________

邮编：_________

电话：_________

传真：_________

联系人：_________

电子信箱：_________

作品名称：_________

作品署名：_________

出版日期：_________

isbn：_________

出版社名称：_________

为扩大图书的传播途径，加大图书资源的综合利用效率，共同推进和繁荣我国的数字化网络出版和基础教育事业，甲乙双方就甲方将其指定作品的数字化版权许可乙方使用的有关事宜达成如下协议：

一、甲方的权利义务

1.甲方授予乙方对其提供图书的数字化版权的非专有使用权（包括简体和繁体），在协议有效期内，乙方可以将甲方授权的图书以电子图书形式在全球范围内制作、传播和销售。“电子图书形式”是指：按照《中华人民共和国著作权法》和国家版权局颁布的《关于制作数字化制品的著作权规定》等有关规定，将图书转换为数字代码形式，并利用软件技术设置各项阅读功能，以非纸介质方式包括但不限于信息网络传播和制作销售电子出版物等数字化制品的方式使用。

2.甲方保证拥有其所提供的图书的版权所有者授予的对图书数字化版权的独家使用权，并拥有授权乙方以本协议约定方式使用图书的权利；保证其所提供的图书和所授予的数字化版权没有违反国家的有关出版管理的法律和侵犯第三方的权利。如因授权图书或上述授权与第三人包括有关国家管理部门发生任何争议，争议的解决以及由此产生的后果均由甲方负责和承担，并应补偿乙方由此受到的一切损失，乙方并可以终止协议。

3.本协议签定之日起_________日内，甲方向乙方提供授权图书的样书和电子文档（电子文档是指s2、s72、ps2、ps、doc、pdf等其中一种格式文件）

4.甲方向乙方授权后，甲方可以享有以下权利：

（1）甲方享有乙方免费为其在_________网站上宣传甲方作品的权利，具体形式双方协商确定；

（2）甲方有权索取相关图书销售和浏览信息；

（3）甲方有权要求乙方按双方约定支付其应得收益；

5.甲方指定_________作为合同执行人及联络人，随本协议附上甲方身份证复印件一份。

6.享有和承担本协议其他条款规定的权利义务。

二、乙方的权利和义务

1.乙方享有甲方所提供图书数字化版权的非专有使用权，即乙方享有将甲方所提供图书转换为数字代码形式，并利用软件技术设置各项阅读功能，以非纸介质方式包括但不限于信息网络传播和制作销售电子出版物等数字化制品的方式使用的非专有使用权。

2.乙方对图书进行数字化使用的具体技术、方法以及乙方推广数字化图书的方式均为乙方的商业秘密；乙方有权许可或禁止他人使用其对图书数字化的具体设计，包括但不限于数字化图书的版式设计、技术设计、独特的阅读功能的设置和组合等，法律另有规定除外。

3.乙方有权在甲方授权使用的范围内根据市场形势决定使用授权作品的具体方式及其宣传、包装、价格和销售形式；乙方为实现使用甲方授权作品的目的，有权委托第三方将授权作品按甲乙双方约定的使用方式进行制作、传播和销售。

共2页，当前第1页12

拆迁补偿安置资金监管协议书

甲 方：

乙 方：漳州市房地产管理局

丙 方：

根据漳政[]地____号用地批文及其他文件，甲方拟实施“________”建设项目的房屋拆迁。依照国务院《城市房屋拆迁管理条例》第二十条规定，为了加强拆迁补偿安置资金的使用管理，甲、乙、丙三方经协商达成以下监管协议：

一、丙方受乙方委托，对甲方拆迁补偿安置资金的使用进行监管。

二、甲方须在丙方开设拆迁补偿安置资金专用帐户，帐户号为________ 。

三、经初步测算，整个地块房屋补偿安置总金额为____万元，甲方应在本协议签订后三日内存入拆迁补偿安置专用资金为____万元，占总补偿资金的____%，剩余拆迁补偿资金____万元应于____年____月内存入。

四、资金监管的期限：自首期拆迁补偿安置资金进入专用帐户之日起至开发片区验收合格之日止。

五、监管方式：

1、甲方应于拆迁公告发布后三日内，将拆迁范围的被拆迁人、房屋承租人名单及房屋门牌号经乙方确认后提供给丙方。甲方如需拆迁补偿安置资金用于购买安置房、货币安置补偿及安置房建设资金时，经乙方确认后，凭乙方出具的拆迁安置补偿资金支付审批表，丙方方可支付。

2、甲方经乙方批准同意后，可按照进入专户总资金5%的比例提取部分资金作为备用，用以支付发布拆迁公告、拆迁业务费、过渡费等；甲方在使用中可自由支配，但丙方须控制其备用金额度不得超过到帐资金的5%。

3、甲方如在规定期限内未将拆迁补偿安置资金全部存入在丙方开设的专用户头，丙方应书面方式及时通知乙方。

4、丙方应提存拆迁安置资金总额的2%____元待开发项目验收后，经乙方确认，丙方方可支付。

六、违约责任：

1、甲方如未能及时将补偿安置资金存入丙方资金户头或弄虚作假将资金挪为他用的，除了承担拆迁补偿安置工作滞后的一切后果外，乙方还将根据拆迁法规定予以处罚。

2、丙方如未按上述条款执行，而引起甲方将资金挪为他用的。丙方有责任自行筹集资金替甲方垫付拆迁补偿安置费及违约费用。

3、因乙方监管不力，引起补偿安置资金挪为他用的，则追究乙方具体工作人员的责任。

七、其他：

八、本协议一式肆份，三方各执一份，拆迁实施单位一份。本协议自签订之日起生效，各方应严格遵照执行。

甲 方： 乙 方：

（签章） （签章）

年月日 年 月 日

丙 方：

（签章）

年 月 日

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

企业合作合同范本

A公司(甲方)：

B公司(乙方)：

一、xx有限公司(以下简称本公司)由A和B共同注册，双方根据友好协商，制订本合同。

二、股东及其出资入股情况：

1、总投资为70万;

a，现金出资人民币49万元，并以本公司注册股东名义参与经营，总共所占股份70%;

b，现金出资人民币21万元，并以本公司注册股东名义参与经营，所占股份为30%;

以上现金出资用于本公司的经营开支，包括租赁和装修，购买办公设备，开支办公费用，员工工资等等。

2、启动资金万元;

a，现金出资人民币28万元;

b，现金出资人民币12万元;

用于本公司的前期开支，包括租赁和装修、购买办公设备等，如有剩余作为公司开业后的流动资金，不得撤回。

3、注册资金为30万元，以30%最低注册资金计算为9万元;

a，现金出资人民币6.3万元;

b，现金出资人民币2.7万元;

到账期限：公司注册完成后，十五日内，注册资金9万元按照各自股份比例打入公司账户作为公司开业后的流动资金，不得撤回。另外21万元在公司注册之日起1年之内按照各自股份比例打入公司账户，如不能按时出资者视为自动退股。

三、公司名称和经营地点：

公司名称：xx有限公司;

公司地点：

四、职务和分工;

1、本公司不设董事会，设执行董事与监事(监事由店长担任)，任期三年;

2、a为公司执行董事兼总经理，负责公司运营与管理;

3、b为公司副执行董事兼副总经理，负责公司财务管理与市场策划，同时协助总经理的经营管理;

4、公司销售、采购、投资、财务等所有工作股东皆有知情权，如提出相关问题，主要负责人须做出合理解释和适当的处理。在相关较重要事务上需要双方达成一致意见，否则，主要负责人需要对由此引起的后果承担相应责任。

五、出资人的权利和义务、责任

1、权利

(1)出资人按投入公司的资本额占公司注册资本额的比例享有所有者的资产权益并转让。

(2)出资人按照出资比例分取红利，公司新增资本时，出资人可以优先认缴出资。在公司盈利情况下，允许所占比例小的一方优先增加投资比例，但不能超过总投资的50%。

(3)出资人共同协商确定公司名称。

(4)如公司不能设立时，在承担发起人义务和责任的前提下，有权依法分得公司的剩余财产。

(5)出资人有权对不履行、不完全履行或不适当履行出资义务的出资人和故意或过失损坏公司利益的出资人提诉讼，要求其承担相应法律责任。

(6)有权查阅股东会会议记录和公司财务报告。

(7)法律、行政规及《公司章程》所赋予的其他权利。

2、义务

(1)出资人应当在规定的期限内足额缴纳各自所认缴的出资额。

(2)出资人以其出资额为限对公司承担责任。股东在公司登记后，不得抽回出资。

(3)出资人应遵守《公司章程》。

(4)本公司发给出资人的出资证明书不得私自交易和抵押，仅作为公司内部分红的依据。

(5)出资人在公司设立过程中，故意或过失侵害公司利益的，应向公司或其他出资人承担赔偿责任。

(6)法律、行政法规及《公司章程》规定应当承担的其他义务。

六、利润分配方式：

1、工资支付：

公司在营业之日起，双方在此承诺，双方只在利润分配上不同，其他权利义务相同，双方工资待遇一致。

2、利润分配：

利润和亏损，按各合伙人的投资比例分配和分担。

公司交纳税后的利润，分配顺序：

1、弥补以前季度的亏损;

2、股东分红，制度如下：

按照a占70%、b占30%的股份比例分红，每季度提取当季度的税后利润的40%进行股东分红，每满12个月再提取近12个月的积累盈利部分的40%进行股东分红，盈利的余额部分作为合作公司的风险公积金和资本公积金，累计额为公司注册资本的50%后，可不再提取。为公司发展，分配比例股东可视具体情况商议调整，原则上不能提高。

七、经营资金的增加：

在储备资金不足情况时公司还需要增加经营资金，经全部股东协商同意，各股东应按照各自所占股份比例增加出售，如有股东出现不能够增加出资的情况，能够增加出资资金的一方可按照其出资的投资额适当增加投资比例。

如需增加其他人入股，需承认本合同并需经全体合伙人同意，同时执行合同规定的相关权利义务。

八、退股方式：

1、股东退股时，需有正当理由方可退股，并应该向另一股东提出书面申请，股东应就其退股事项书面通知其他股东征求同意，其他股东自接到书面通知之日起满三十日未答复的，视为同意退股。退股一方在没有清偿公司债务完毕的时候不能撤股。

每个合作股东的现金总出资额(此协议)是作为该股东退股的唯一结算依据，合作公司应先行将公司总盈利部分的60%按照股份分红比例结算，加上10%的资本公积金，然后再将该股东的现金总出资额退回。30%是公司的资产折旧和风险公积金不得分配。

2、如公司没有盈利，刚根据公司现有总资产按照实际总出资额股份比例的90%退回该撤资股东。

3、退股后以退股时的财产状况进行结算，不论何种方式出资，均以现金结算

九、公司的解散和清算

1、合作因以下事由之一得终止：

①合伙期届满;

②全体合作双方同意终止合伙关系;

③合作事业完成或不能完成;

④合作事业违反法律被撤销;

⑤法院根据有关当事人请求判决解散。

2、合作终止后的事项：

①即行推举清算人，并邀请各合伙人确定的中间人(或公证员)参与清算;

②清算后如有盈余，刚按收取债权、清偿债务、返还出资、按比例分配剩余财产的顺序进行。固定资产和不可分物，可作价卖给合伙人或第三人，其价款参与分配;

③清算后如有亏损，不论合作双方出资多少，先以合作双方共同财产偿还，公司财产不足清偿的部分，由合作双方按出资比例承担。

十、该协议签字即具有法律效应。

十一、其他未尽事项参考公司相关制度并协商解决。

十二、本协议签定于xx年xx月xx日，一式二份，合作双方生字后生效，合作双方各执一份。

A公司(甲方)：

B公司(乙方)：

网络订票合作协议

合同编号：________________

甲方：_____________________

住址：_____________________

电话：_____________________

邮编：_____________________

法人代表：_________________

身份证号：_________________

开户银行：_________________

账号：_____________________

乙方：_____________________

住址：_____________________

电话：_____________________

邮编：_____________________

法人代表：_________________

身份证号：_________________

甲乙双方本着互利互惠友好合作的原则，经协商就乙方通过甲方提供的网络系统，查询预订航空电子客票一事，达成如下协议：

一、合作方式

甲方向乙方提供航空动态信息查询系统及订单打印系统，机场取票服务。

二、票款结算

（1）当乙方确认订座后，乙方所有订票视为交易成功。乙方必须在_________前将票款汇入甲方指定账户，如乙方未按规定办理。甲方有权取消该订座且所有损失由乙方承担。

（2）如双方确认订座交易成功后，因甲方原因造成旅客未能按时登机时，责任由甲方承担；并且甲方应按民航相关规定，作好旅客善后服务工作。

三、权利义务

（1）乙方在确认订单前：必须认真审查乘客有效证件，如实填写乘机人详细资料，联系电话，乘机日期及乘客乘机需知。

（2）旅客订座单应保留________以上。如遇旅客原因退票或误机，乙方应征得甲方同意，确认退票折扣后方可办理退票手续。

（3）在服务过程中，如遇旅客投诉由甲乙双方共同协调解决，损失均由责任方自负。乙方应加强服务工作，如服务中多次出现旅客投诉，经批评整改无明显改观的，甲方有权终止该协议；并保留追究法律责任和经济损失的权力。

（4）甲方应做好网络维护工作，尽量保持网络畅通及系统完好率，做好售后服务工作，并承诺保守客户资源信息秘密。

（5）乙方有责任和义务协助甲方维护网络安全，网络信誉，及商业机密，并承诺甲方提供的网络系统及软件，工作号等不能私自转借，如经发现，甲方有权终止双方合作协议。由此造成的一切损失均由乙方负责。

（6）甲方应保证乙方准时（航班起飞前90分钟）在机场换取航空机票。乙方负责做好旅客的预定相关工作，一旦发生旅客相关服务投诉，甲乙双方各负其相关责任，并承担相应经济损失。

（7）在本协议期间内，乙方若单方面中止协议，需提前30天向甲方提出申请；并结清应付机票余额款项。

四、协议期限

本协议有效期从______年_____月_____日起至______年_____月_____日止共计_________。本协议经甲乙双方签字生效。

五、补充与附件

本合同未尽事宜，依照有关法律、法规执行，法律、法规未作规定的，甲乙双方可以达成书面补充合同。本合同的附件和补充合同均为本合同不可分割的组成部分，与本合同具有同等的法律效力。

六、争议的处理

本合同在履行过程中发生的争议，由双方当事人协商解决，也可由有关部门调解；协商或调解不成的，按下列第____种方式解决

1. 提交_________仲裁委员会仲裁；

2. 依法向人民法院起诉。

甲方（盖章）：_________    乙方（盖章）：_________

共2页，当前第1页12

航空服务合作协议

甲方：

乙方：______航空服务有限公司

甲乙双方本着友好合作，互惠互利的原则，达成以下协议：

一、乙方责任：

1、乙方负责给甲方提供国际、国内航班查询、送票、预订酒店、火车票、边防证等服务（火车票手续费___元）；

2、乙方应按国家规定对国内机票实行明折明扣政策；及时将市场最新优惠政策提供给甲方；

3、甲方退票、改票，均由乙方指派专人负责上门办理，退票需按民航规定办理，退票规定如下：

a、国航退票规则：旅客所订机票在___折-___折要求退票，需按票面收取___%退票费；___折-___折退票按票面收取___%退票费；___折-___折要求退票按票面收取___%的退票费。

b、其它航空公司退票规则：离飞机起飞时间___小时以前提出退票，按票面扣取___％的退票费；在离飞机起飞时间___小时以内，___小时以前提出退票，按票面扣取___％的退票费；在离飞机起飞时间___小时以内提出退票，按票面扣取___％的退票费。

二、甲方责任：

1、甲方的订单应向乙方传真、email或电话等方式进行确认，以保证乘机人姓名与身份证相符；

2、甲方若在春节期间购票，应提前___天通知乙方。

三、优惠方式

1、节假日期间优先服务，且逢年过节期间优先满足协议单位票源；

2、异地客户可享受免费送票到机场服务。

四、结帐方式：

*月结：月结客户应由乙方于次月___日前发对帐单，甲方并于___日之内结帐。

*现金支付：可使用现金直接付款或持信用卡至我公司刷卡。

五、双方在合作过程中，若是乙方直接原因造成甲方损失，由乙方负全责，反之由甲方负全责。

六、本协议具有相关法律效力，若一方提出终止协议，须提前十天进行友好协商；未尽事宜，双方协商解决。

七、本协议一式两份，甲乙双方名执一份。经甲、乙双方签字，盖章后生效。有效期自___年___月___日至___年___月___日。

甲方（盖章）：乙方（盖章）：

负责人：负责人：

联系电话：联系电话：

传真：传真：

email： email：

日期：日期：

合作办学协议

编号 ：_________

甲方：_________

乙方：_________

合作办学项目：_________

甲乙双方经友好协商，本着平等互利、共同发展的原则，就双方合作办学事宜达成以下协议：

第一条 甲方权利义务：

一、负责提供培训教材，并负责为合格学员办理相关证书，认证手续费、证书工本费由乙方负责。

二、负责对联合办学单位的招生、教学负责人及师资进行指导。

三、负责审核乙方的办学资格、条件、管理、考试等事项，如发现乙方有严重违反有关规定、违反双方约定、提供不实资料等行为之一或不适应合作项目办学条件的，甲方有权单方面提前终止合作协议，后果由乙方承担。

四、对乙方的考试进行监督。

五、根据行业发展的要求，提供相关的技术指导。

六、甲方负责学员的就业安排工作。

第二条 乙方权利义务：

一、负责在当地教育主管部门办理办学项目的报批手续，做到依法办学。

二、负责承担办学活动中发生的全部税金并负责向当地税务部门交纳。

三、负责办学所需的设备、场地、人员、师资、资金等，实行自主办学、独立核算，自负盈亏。

四、负责在当地聘请教学人员，将教师资料按要求提交甲方审核，确认其授课资格。

五、负责当地的招生、教学、日常管理等培训班全部事务。

六、乙方应按甲方规定的收费标准进行收费，如因特殊原因须调整收费的，应提前与甲方协商，并获得甲方批准后方能执行。

七、乙方所有广告、信息、招生简章的文本，须经甲方确认后方可发布。

八、合作期限内，联合办学方不得与其他办学机构再签订类似或专业相近的协议、合同。

九、甲乙双方各自独立承担民事及法律责任，相互之间无产权关系。

第三条 费用及结算方法：

一、协议签署当日，乙方应向甲方交纳培训指导费_________元整。乙方向甲方交纳_________％管理费及_________％的就业安置费。

二、培训班开班前两天内，乙方应将学员报名表装订成册报甲方注册，并按甲方相关要求开展教学工作。

三、甲方到乙方开展工作或办理相关事务，所发生的差旅费、住宿费、生活费等由甲方承担。

四、甲方负责为乙方考试合格的学员办理有关单位的证书，相应的认证手续费和证书工本费由乙方负责向甲方支付，该费用乙方可向学员另行收取。

五、乙方如在开班前向甲方提前申领教材，应按规定价格支付教材资料费。

第四条 协议书的生效

一、本协议一式两份，双方各执一份，经双方签字盖章后生效。

二、本协议有效期限为_________年，自_________年_________月_________日起至_________年_________月_________日止。期满自行作废。

乙方如需继续合作须在期满前三个月内提出书面续约申请，经甲方核准后双方另立协议。

甲方（盖章）：_________ 乙方（盖章）：_________

代表人（签字）：_________ 代表人（签字）：_________

_________年____月____日 _________年____月____日

签订地点：_________ 签订地点：_________

甲方：

乙方：

为适应市场及企业发展的需要，本着双赢观念，甲乙双方经协商达成如下协议：

一、合作内容：

甲乙双方就河南省___至__高速公路沥青路面工程项目投标及相关事宜达成合作协议。

二、甲、乙双方职责、权利、义务：

甲方职责：

(1) 负责按业主及招标要求购买该工程项目的资格预审文件。

(2) 按资格预审文件要求编制资格预审文件并负责资格预审文件的递交。

(3) 资格预审文件通过后，根据业主要求购买招标文件、组织人员踏勘工地，负责投标书编制工作，

提交投标保证金。

(4) 若该项目中标，负责与业主签定施工合同。

(5) 负责中标后的施工管理，安排施工队伍，组织施工生产，履行合同承诺。

(6) 中标后与乙方签定施工合同，明确双方的责、权、利。

乙方职责：

(1) 负责协调与业主各方的关系。

(2) 资格预审过程中，负责提供与资审有关的信息，确保资审通过。

(3) 编制投标文件期间，负责提供编制投标文件及定标所需的有关资料和信息(含报价分析报告

和评标关键性资料)，确保所提供资料及信息的准确性和及时性。

(4) 若工程中标，乙方作为甲方内部的一个施工队伍承担总工程量50%的工程，服从甲方对本工程

项目的统一管理和指挥，负责所承担工程的施工管理，施工队伍安排，组织施工生产，履行合同承诺。

三、成本费用

一、 编标成本费用包括编制资格预审申请文件成本费用和编制投标文件成本费用。

(1) 编制资格预审申请文件成本费用包含购买资格预审文件、编制资格预审申请文件及递交资格预审申请文件所发生的费用。

(2) 编制投标文件成本费包含购买招标文件、工地调查、编制投标文件及递交文件过程中发生的费用。

二、 本项目编标成本费用由甲方承担。

四、承包工程量的比例及费用支付方式

一、若该项目中标，甲方利用乙方资源，采取承包合作的方式，根据该中标工程项目实际承揽任务额，安排给乙方50%的工作量。为确保施工现场有序、规范，保质保量完成任务，乙方自行交纳乙方施工总金额的税金(营业税、城市建设维护和教育附加税)和法定法规(若有要求则有业主或甲方代扣代缴)。

二、该项工程若需银行履约保函，甲方负责提供;若需提供现金履约保证金，则需甲乙双方根据所承担的工程量分别承担。

三、用的支付办法：在甲方与业主签定施工合同后，甲方应与乙方及时签定承包股东合作合同范本。乙方按承担的工程量享受业主的预付款;每次业主对甲方实施计量支付后7天内，甲方对乙方实施计量支付;工程竣工后，业主对甲方进行竣工决算并支付全部工程款后10天内，甲方对乙方进行竣工决算并支付完乙方应得承包价款。

四、乙方全部承担投标期间的协作服务费，甲方不向乙方收取施工管理费。

五、其他事项

一、 中标后，甲乙双方订立书面的工程承包合同，进一步明确职责、权利和义务。

二、乙方对所承包的工程应严格按照业主和甲方的要求施工，包括管理、测量、试验、物资采购储存、机械设备调遣、劳力安排、质量检验、资料报签整理、计量支付基础文件、环境保护、征地拆迁、与地方有关部门的协调等，施工中，甲方发现乙方生产要素配置、工期进度、质量安全达不到业主要求时，甲方及时提出整改意见，乙方应限时整改，造成的经济损失均由乙方赔偿。

三、 甲方对乙方承包工程的基本要求：安全、质量、工期、环保符合国家的现行标准和与业主签定合同的具体要求;维护甲方的企业形象和信誉。

六、本着精诚合作的原则，甲、乙双方需积极维护对方在社会中的良好形象和信誉，不得以任何方式损害对方的形象和信誉。

七、未尽事宜，双方本着互相谅解的原则，协商解决。本协议一式贰份，甲乙双方各执壹份。

八、协议自正式签署之日起。若该项目未中标，本协议自行失效。

甲方(签字)：_____________乙方(签字)：_____________

联系电话：_________________联系电话：__________________

____________年______月____日____________年______月____日

非专利技术转让合同

转让方：___________________________

法定代表人或负责人：_______________

受让方：___________________________

法定代表人或负责人：_______________

根据《中华人民共和国合同法》的有关规定，经双方当事人协商一致，签订本合同。

1.项目名称：________________。

2.本非专利技术的性能，工业化开发程度：______________。

3.本合同的授权性质：__________________。

（注：非专利技术转让合同当事人可以依照专利实施许可合同，采取独占，排他，普通许可证的形式。）

4.使用本非专利技术的范围：______________________（注：使用范围指地域范围、期限范围、使用方式范围。）

5.转让方的主要义务：

（1）在合同生效之日起______天内，向受让方交付下列技术资料：______________。

（2）在合同履行过程中，向受让方提供下列内容的技术指导和服务：____________________。

（3）保证所转让的技术具有实用性，可靠性，即为能够应用于生产实践的成熟技术。保证使用本非专利技术能够达到下列技术经济指标：__________________。

6.受让的义务：

（1）向转让方支付使用费，数额为________元。按下列日期分期支付：________________

[注：在采取提成支付的情况下，当事人可以约定：a.合同生效后______日内先向转让方支付________元；b.自合同产品投产之日起（或第一件合同产品销售之日起）________年内接产值（或销售额、或利润）的__________％向转让方支付提成费。提成费每年支付一次，支付日期为每年________月______日前。]

（2）按照合同约定的范围使用本非专利技术。

7.保密条款

在本合同有效期内，双方当事人应对下列技术资料承担保密义务：__________________。本合同期满后________年后，双方当事人应对下列技术资料承担保密义务：________________。

8.合同产品的验收标准和方法：________________________。

9.后续改进条款

在本合同履行过程中，双方当事人各自在本转让技术基础上做出的新的发明创造专利权归做出发明创造的一方所有，但当事人另有约定的除外。

10.转让方的违约责任

（1）转让方不按照合同约定向受让方提供技术资料及技术指导，应视不同情况，返还部分或全部使用费，并支付数额为________的违约金；

（2）转让方逾期两个月不向受让方提供技术资料及技术指导，受让方有权解除合同，转让方应当返还使用费，并支付数额为______的违约金；

（3）转让方违反合同约定的保密义务，泄露技术秘密，使受让方遭受损失的，转让方应当支付数额为________的违约金。

让与方实施使用该非专利技术超越约定的范围的，违反约定擅自许可第三人实施该项非专利技术的，应当停止违约行为，支付违约金或赔偿损失。

11.受让方的违约责任

（1）受让方未按合同约定的期限和方式支付使用费，应补交使用费外，应向转让方支付数额为________的违约金，受让方拒不交付使用费或违约金，除必须停止使用非专利技术外应当返还技术资料，支付数额为__________的违约金；

共2页，当前第1页12

资金贷款贴息项目合同书

合同书编号：_____________

第一条 __________管理委员会(以下简称甲方)与____________(以下简称乙方)，根据有关法律、法规，为顺利完成________资金贷款贴息的___________________________项目，特订立本合同。

第二条 甲乙双方一致确认，本项目执行期为自_____年____月至_____年___月。项目完成的总体目标、经济、技术、质量指标是：

1.总体目标：项目总投资__________万元。其中在项目执行期内，计划新增投资__________万元。合同到期时，项目达到______生产阶段，企业总资产达到__________万元，企业总人数达______人，并通过甲方的项目验收。

2.经济目标：在本项目执行期内，项目实现累计销售收入_________万元，累计缴税总额_________万元，累计净利润_________万元，累计出口创汇__________万美元。

3.技术指标：项目产品主要性能指标达到

a. __________________________________________________

b. __________________________________________________

c. __________________________________________________

4.项目产品达到的质量标准：

a.企业获得的质量认证体系证书_________________________

b.项目产品执行的质量标准_____________________________

c.项目获得的国家相关行业许可证_______________________

第三条 甲乙双方确认，在项目执行期内，项目实施阶段目标是

1.______年____月至______年____月：__________________

2.______年____月至______年____月：__________________

3.______年____月至______年____月：__________________

4.______年____月至______年____月：__________________

第四条 甲乙双方确认,本合同签字时乙方已为实施本项目贷款________万元。为支持本项目，乙方所提供贷款证明及付息的有效凭据经甲方认可后，甲方将安排为此贷款贴息________万元。甲方的贴息款拨付进度：

1.______年____月________万元

2.______年____月________万元

第五条 甲乙双方确认，除甲方首次拨款外的剩余贴息款，将视项目进展及验收情况，再行决定拨付金额及时间。

第六条 乙方承诺，在本合同生效后，乙方在项目实施过程中将接受甲方的监督、检查。在项目执行期间的规定时间内，按甲方所规定的格式，如实上报___________资金项目跟踪考核表;在项目完成后的规定时间内，按甲方所规定的格式，如实上报___________资金项目验收表。

第七条 在本合同生效后5年内，甲方有权因非商业目的(如：在政府性会议、报告、文件、统计资料等)使用乙方企业项目信息。

第八条 任何一方因不可抗拒力不能履行合同时，应及时通知另一方，并在合理期间内出具合同不能履行的证明。任何一方提出变更合同的需求，需与另一方协商，签订变更协议后方可执行。

第九条 甲乙双方应严格遵守本合同的各项条款。在项目实施过程中，如发现乙方违反本合同及有关规定，甲方有权撤销或中止合同。撤销或中止合同后，乙方应进行项目清算，并根据甲方要求退还部分或全部已拨资金。同时，甲方今后不再受理乙方的申请。

第十条 双方如发生争议，应协商解决。协商不成，任何一方均可向北京仲裁委员会提起仲裁。仲裁是终局的，对双方均有约束力。

第十一条 根据项目具体情况，经双方协商订立的附加条款将作为本合同的组成部分。

第十二条 本合同未尽事宜，参照《关于支持高新技术产业创新及产业化的暂行办法(XX年5月修订》及相应的实施办法执行。

第十三条 本合同一式四份，甲方执三份，乙方执一份，每份具有同等的法律效力。

甲方：___________(盖章) 乙方：__________(盖章)

负责人：________________ 负责人：________________

日期： _________________ 日期：__________________

账户名称：______________ 账户名称：______________

开户行：________________ 开户行：________________

账号：__________________ 账号：__________________

联系人：________________ 联系人：________________

电话：__________________ 电话：__________________

传真：__________________ 传真：__________________

地址：__________________ 地址：__________________

邮编：__________________ 邮编：__________________

e-mail：________________ e-mail：________________

技术转让合同范本

第十一章 税费

11.1 凡因履行本合同而引起的一切税费、发生在中国以外的应由乙方负责。

11.2 在执行合同期间，乙方在中国境内取得的收

入应按中国税法缴税。此税费由甲方在每次支付时扣交，并将税务局的收据副本一份交乙方。 第十二章 仲裁

12.1 凡因执行本合同而引起的一切争执，应由双方通过友好协商来解决。在不能解决时，则提交仲裁解决。

12.2 仲裁地点在中国北京，由中国国际经济贸易仲裁委员会按该会仲裁程序暂行进行仲裁。仲裁也可在瑞典的斯德哥尔摩进行，并由斯德哥尔摩商会仲裁院按仲裁院的程序进行仲裁。

12.3 仲裁裁决应是终局裁决，对双方均有约束力，双方都应遵照执行。

12.4 仲裁费应由败诉一方负担。

12.5 在仲裁过程中，本合同中除了接受仲裁的部分外，仍应由双方继续执行。 第十三章 不可抗力

13.1 若签约的任一方，由于战争及严重的火灾、水灾、台风和地震所引起的事件，影响了合同的执行时，则应延迟合同期限，延迟时间应相当于事故所影响的时间。

13.2 责任方应尽快地将发生的人力不可抗拒事故电告另一方，并在＿＿＿＿天内以航空挂号将有关当局出具的证明文件提交另一方确认。

13.3 若人力不可抗拒事故延续到＿＿＿＿天以上时，双方应通过友好协商尽快解决合同继续执行问题。 第十四章 合同生效及其它

14.1 合同在甲方和乙方代表签字之后，双方需向各自政府申请批准，并以最后批准一方的日期作为生效日。双方应尽最大的努力在＿＿＿＿天期限内获得批准。并用电报通知对方，随之以信件予以确认。若合同签字后＿＿＿＿个月内不能生效，则本合同对甲方和乙方都无约束力，经双方同意，申请批准的期限可以延长。

14.2 本合同用＿＿＿＿文和中文书写各四份，＿＿＿＿文文本和中文文本具有同等效力。双方执中、＿＿＿＿文文本各二份。

14.3 本合同从合同生效之日起＿＿＿＿年内有效。有效期满后，本合同即自动失效。除非在合同有效期内双方另有协议，第二阶段合同产品开始日期将由乙方来华指导时，双方签订备忘录予以确认。 14.3.1 合同期满前＿＿＿＿个月之前的任何时候，甲方或乙方均可提出要求进行合同延期的谈判，届时签订合同延期的专门条款。

14.4 合同第一阶段在合同生效之日开始，合同第二阶段的开始日期预期为合同生效后的第＿＿＿＿个月。 14.5 合同终止前，任何合同项下发生的未清理的赊欠和债务将不受合同终止的影响。合同的终止并不能解除债务赊欠一方对另一方债务。

14.6 本合同附件均为本合同不可分割的部分，与合同正文具有同等效力。

14.7 合同签字前双方之间的所有来往通讯文电，从合同生效之日起自动失效。

14.8 只有根据双方授权代表签字的书面文件才能对本合同进行更改和补充。这些文件将成为合同不可分割的部分。

14.9 双方为履行本合同而进行的通讯应以＿＿＿＿国文书写一式二份。

共7页，当前第6页1234567

技术合作合同简单协议书

技术合作方面肯定也是需要签好合约的了，今天小编就给大家参考一下技术合同，欢迎大家来参考哦

表达技术合作合同

___________________(本协议中乙方) 使用_______________有限公司(以下简称甲方)的____________________系统技术合作开发组件单机版、网络版及相关版本，并包括相关介质、印刷材料及联机或电子文档产品须保证遵守以下各项规定：

第一条 知识产权

____________________系统技术合作开发组件单机版、网络版及相关版本，并包括相关介质、印刷材料及联机或电子文档产品是由______有限公司(下面简称为甲方)独立开发并拥有的，受到国际知识产权法律公约保护的产品。甲方对于该产品拥有所有权、修改权、使用权和最终解释权。

第二条 协议确认

本协议对________系统技术合作开发组件单机版、网络版及相关版本，并包括相关介质、印刷材料及联机或电子文档等产品有效。未与甲方签定此协议且未经甲方授权的单位或个人，不得以任何形式修改、使用、复制传播、公开展示、实施、转载、反编译，或者用于其它用途。

第三条 用户权利与义务

1.用户权利

乙方遵守本《协议》的各项条款和条件，甲方将授予乙方以下权利：

a. 应用

与甲方签定此协议并经过甲方授权可以对于该产品进行以下应用：系统测试、产品内嵌及基于此产品进行的其他二次开发。

b. 性能或基准测试

在没有获得甲方事先书面同意的情况下，乙方不可向任何第三方透露________系统技术合作开发组件单机版、网络版及相关版本的任何基准测试结果。

c 权利的保留。

甲方保留未在本《协议》中明示授予乙方的一切权利。

2.乙方义务

凡与甲方签定此协议并经过甲方授权的用户应当自觉遵守此协议的约定，未经甲方授权或允许的情况下，不得把此产品或嵌有此产品的相关产品，包括相关介质、印刷材料及联机或电子文档等产品进行复制传播、公开展示、推广、转载、反编译或应用于其他未经授权的用途。用户有义务保守该产品的技术秘密，并对因任何原因造成的泄密现象负有责任，甲方保留所有追究相关责任的权利。

3.转让

乙方与甲方签定相关协议后，经过甲方授权，乙方可在与第三方签定保密协议情况下，提供给第三方含有此产品的软件、系统或中间件及其他相关程序产品，包括相关介质、印刷材料及联机或电子文档等产品。

4.对反向工程、反编译、和反汇编的限制

未经甲方授权，不得对________系统技术合作开发组件单机版、网络版及相关版本，进行反向工程、反编译或反汇编及任何形式的破解行为。

第四条 终止

如乙方未遵守本《协议》的各项条款和条件，甲方有权终止本《协议》。同时乙方必须销毁甲方向乙方提供的所有资料及文件。

第五条 技术支持

甲方只对签定此协议的用户提供技术支持，技术支持内容包括电话、E-mail、文档、培训等。

第六条 适用法律。

本协议的有效性、解释、执行及履行和争议解决适用于中华人民共和国的法律和_______市地方法规以及信息产业部之相关法规。

甲方：_____________________

乙方：_____________________

(签字/盖章)

负责人：___________________

_______年_______月_______日

技术合作协议模板

甲方：

乙方：

丙方：

甲、乙、丙三方根据《公司法》等法律规定，本着平等互利的原则，经过充分协商，决定合股投资(touzi)经营网络有限公司。特订立本协议，以便三方共同遵守：

一、合股投资经营公司名称为："网络有限公司"，性质为有限责任公司，公司住所地在。二、经营范围为等。根据公司的实际经营能力，可逐步拓展经营范围。

三、公司的投资方式为：甲方以现金出资，占现金出资总额的70%，折合公司股份为63%;乙方以现金出资，占现金出资总额的30%，折合公司股份为27%;丙方以技术出资，折合股份为10%，负责处理所有技术问题。

四、各方出资方式，甲方与乙方在第一期共投资200万，到使用完200万后再共追加投资100万，待追加的100万使用完后再另追加投资100万，如此类推，直到损益平衡后不再追加投资。

五、甲方或乙方在任一期投资中，如一方不按比例追加投资，而由另一方单独投资或多出资，则另一方按现金投资比率计算多出的投资部分算作一方向另一方的借款，并按1%的月息计息。如此类推，直至损益平衡不再追加投资时，另一方有权选择：(1)双方再按实际投资数(包括利息在内)重新计算各自投资额和应占的股份;(2)仍按本合同第三条约定的股份比率计算各方应出资额，另一方有权就多出的投资部分算作一方向另一方的借款并按1%的月息计息，向一方追讨。

六、公司设执行董事一名，执行董事由甲方担任，兼任总经理，并设置相应的组织机构。各机构的负责人由三方协商出任。公司会计由方委派担任，出纳由方委派担任。

七、公司的重大事项经股东会决议，需由全体股东一致通过，一般事务由总经理全权处理。其他机构各司其职，做到勤勉尽责。

八、利润分配：甲、乙、丙三方根据《公司章程》和股东会议决定按照股份比例在每个会计年度后一个月内分取红利。

九、甲、乙任何一方中途撤出资金，需提前一个月提出并需得到对方及丙方同意。否则视为违约。十、股份转让：甲、乙任何一方转让股份，需得到另一方的同意，且另一方股东有优先购买权。任何一方不得擅自抽逃股金。丙方如需转让股份，必须经得甲乙双方同意。

十一、经营期限：甲、乙、丙三方合股投资经营的期限为年。以《公司章程》确定的起止时间为准。到期按照公司法的规定进行清算，如继续合股经营，续订协议确定。

十二、违约责任：甲、乙、丙三方应当严格遵守该协议。如果甲方违约，应按照乙方的出资额赔偿乙方损失,并按照公司注册资本的10%赔偿丙方损失;如果乙违约，应按照甲方的出资额赔偿甲方损失,并按照公司注册资本的10%赔偿丙方损失。若丙方未得到甲方和乙方双方的同意而擅自退出，或者不提供技术支持，则视为违约，需向甲方和乙方各支付违约金叁拾万元并负责赔偿甲乙的损失。

十三、本协议未尽事项，按照《公司章程》的规定执行，也可经各方另行协商，签订补充协议，补充协议与本协议具有同等效力。十四、本协议自签订之日起生效。

十五、本协议一式四份，甲、乙、丙三方各执一份，报有关部门一份备查。各方签字盖章后生效。

甲方：乙方：丙方：20xx年x月x日

技术合作协议书范本

甲方：(武汉)有限公司

乙方：

鉴于甲方拥有

;

鉴于乙方对甲方技术的了解，愿意实施甲方的技术及专有技术，并且具备实施该这些技术的物质条件、法人资格和必要的资金，双方经过充分协商，本着平等自愿、互利有偿和诚实信用的原则签订本合同，共同遵照履行。

一、甲方所提供技术的内容、要求和工业化开发程度：

。

二、甲方所提供技术乙方可使用的范围以及将来产品的销售范围：

。

三、技术秘密的范围和保护期限：

。

四、技术指导的内容：

。

五、技术指导的人员由甲方派出，差旅费、咨询服务费有乙方承担，具体费用标准，甲乙双方另行订立协议进一步明确。

六、技术情报和资料及其提交期限、地点和方式：

。七、验收的标准和方法：

。

八、技术使用费及支付方法：(1)按利润分成，甲：乙：的比例分;(2)销售额提成%。

九、合作方式：甲方按照本协议约定提供符合要求的技术以及相关的技术咨询服务，甲、乙双方应就本协议的技术所生产的产品的成本、销售、利润设立单独的帐目，由双方派人共同监管。在条件成熟时，由乙方或甲、乙双方设立该技术生产项目的项目公司。

十、合作期限：。

十一、后续改进的提供与分享：甲、乙方商定在生产过程中对现有技术的改良或革新以及由此技术而得到的其他技术，所有权仍然归甲方所有，但乙方在合作期限内有权免费继续使用。

十二、其他约定：甲方在与乙方就该技术进行合作时，并不限制甲方和其他有条件实施该技术的企业或个人进行合作。

十三、违约责任：

。

十四、争议的解决办法：甲乙双方就本协议所产生的任何争议都应该进行友好协商，协商解决不成的一致同意提交技术提供方所在地的仲裁委员会进行仲裁。

十五、本协议自双方签章之日起即具有法律效力，一式二份，双方各执一份。

十六、本协议未尽事宜，双方可进一步协商后订立补充协议或变更本协议内容，补充协议或变更内容与本协议具有同等法律效力。

甲方：(武汉)乙方：

有限公司

签章：签章：

签约地点：签约日期：