出纳英文自我评价怎么写 自我介绍的(精品20篇)

After three months of probation, I learned a lot at work. Financial cashier work seems to be simple, but it needs to do a lot of careful and patience, but also need to be cautious. For each sum of money for reimbursement, carefully, strictly in accordance with the companys financial system, and in accordance with the procedures for the implementation, in case of special circumstances are special treatment to ensure the normal operation of the company. To make cashier work can not use the "easy" to describe, it is the first line of financial work, financial revenue and expenditure of the juncture in the companys management plays an important role. As a qualified cashier, must have the following basic requirements: First, learn, understand and master the policies and regulations and company system, and constantly improve their level of business and knowledge and skills. Then, cashier personnel to abide by the good professional ethics. Second, the cashier must have a strong sense of security, cash, notes, all kinds of seals, it is necessary to have the internal custody of the division of responsibility, but also to contain each other.Finally, good communication skills, especially for others to explain or convey the relevant financial matters, good communication and expression can reduce the number of unnecessary unnecessary misunderstanding, greatly improve efficiency. Of course, in many ways, due to their professional knowledge, ability limitations, there are still some deficiencies in the future work in addition to abide by the above basic four points, I will continue to study hard to improve their professional skills, To adapt to the changing social environment and future work carried out by the company, with the times.

These are my three months of this work I have some experience and summary. In the future work and study I will make unremitting efforts to do their own work, and the road with the companys development in sync. At the same time actively assist others, the common development for the company. I sincerely thank the company leaders and colleagues for their support and concern in their work and life. I also earnestly ask the leaders of the company to give me a chance to continue to exercise and realize the ideal. I will use modest attitude and full of enthusiasm to do my own work, create value for the company at the same time, so that their own towards a higher level.

I have engaged in financial accounting work for many years, experienced, competent high financial and accounting jobs. And I have been without interruption improving professional skills, he has passed the assistant accountant, intermediate accountant. I am familiar with the national taxation regulations, policies, proficiency in office software, financial software (including the "gold plate K3", "the UF T6", "Digital China Yi Fei" Golden Abacus ", etc.), proficiency in electronic VAT declaration, foreign-invested enterprises income tax returns, export tax rebates and other financial and tax reporting software.

I am cheerful, serious and responsible work, and actively learn, work, willing to help in the field, I need a stage show of self-worth, but also to constantly improve themselves, challenge themselves, if your company can be given the opportunity, I will be in the future among work harder in order to return the company, but also hope to have the opportunity and your company to create a win-win situation.

After a semester of study, I learned a lot of knowledge, basically adapted to the high school life. And in the school which participated in the school chorus, art teacher to help open class, was named the school three good students; - from Fangshan District, a high school student electronic platform

★ blink of an eye, high schools first semester has passed. At the same time as a representative of the language, I can also finish the task of the teacher layout; this semester I also organized a class meeting, conducted speeches, "I have been able to do a good job in this class, "Unconsciously I have the ability to improve in all aspects. I also recognize their own shortcomings, such as the lack of systematic study of the contents of the review, I do not know where to start from scratch; physical activity is not active and so on.

★ I am learning this semester progress, especially in math scores more prominent. However, I have not fully meet the goals set, mainly because they did not develop good study habits, lazy thinking is more serious, there are luck, but also the degree of effort is not enough.

I warm and cheerful personality, friendly, honest and humble. Hard-working, serious and responsible, hard working, conscientious, patient. Affinity, approachable, good communication. Study hard seriously, with outstanding results. Actively participate in extracurricular sports activities, a variety of social practice and part-time work, in order to increase their experience and improve their capabilities. Experience in the way things work, exercise eloquence and interpersonal skills. In normal school life, I have done a lot of part-time. For example: tutoring, telephone interviewers, restaurant waiters, leaflets, questionnaires, also played summer jobs to the plant, to experience a different way of doing things and the various operational procedures work, exercise has become a hard-working spirit, and from work to appreciate the joy and dedication.

years in July graduated from work, I have from a naive student gradually grow into a qualified technical staff, after several years of on-site practical work, I have summed up a suit of their own procedures. Over the past few years I have been engaged in mechanical turning, milling, C lathe. Now is engaged in: the fixture set, CAD drawings, machining process scheduling and workshop director.

In the project I was responsible for technical management, work has been conscientious and meticulous work, has been pursuing scientific management, strict construction quality requirements to ensure that the construction of a check pass rate of 100%. In the management work, I strengthen the quality management, cost management, schedule management, security management.

In quality management, I put the quality of life-long responsibility system to strengthen the management, a clear responsibility to strengthen the responsibility of the management card as the focus of the construction process, thus ensuring the quality of the construction process qualified, while increasing the quality of day-to-day management, To the process failure shall not be carried out under the procedures of construction, to ensure that every process control. At the same time to strengthen the construction of pre-construction technical disclosure, the preparation and implementation of the program supervision. Work in the strict implementation of various standards, to strengthen the process of quality control, the implementation of quality wage system, high quality and competitive prices, to create a quality project has played a catalytic role.

In the cost management, in the construction cost to do a good job before the forecast, the construction cost management in the implementation of dynamic monitoring and management, so that the project cost has always been orderly and controllable management system to run. In the actual construction, it is forbidden to carry out large-scale rework in the field, rationally use materials, make use of old materials and waste materials, and minimize the project input. Meanwhile, strengthen the management of machinery, regularly inspect and do well maintenance and improve the comprehensive utilization rate. run.

In order to ensure that the control point construction task is completed on time, I carefully organize, do a good job of construction preparation, the implementation of the weekly plan, the implementation of the project plan for the project management, Management, to the Japanese security week, to Zhoubao month. Reasonable division of the construction phase, the use of parallel flow construction method. Strengthen the safety management on the construction site for a long time, on-site construction environment is responsible for the characteristics of frequent intertwined operations to strengthen the construction site safety management, and strengthen employee self-protection awareness, insist on safety work in the first place, strengthen the safety , Fire education, and establish the safety of all people, and everyone to implement the provisions of fire safety, so that every day about security, and every day to implement security, check every day security. Years of on-site work I have been a positive attitude to play to their strengths, and actively work. 20xx Petrochemical Company in Dalian, a distillation expansion project proposed rationalization proposals for the project to save money 200,000 yuan, not only reduces the difficulty of construction and improve the efficiency of construction, in the tight schedule, the task of large, difficult operating conditions Reasonable division of the construction phase to ensure the quality of the construction in advance to complete the creation of good conditions, won the Party, the Commissioner and many other leaders of the highly praised. I have been involved in the work of the main work, but I engaged in or involved in other work there are many: If the project has been involved in a number of tender work, project management and other pre-settlement. In all my work, can be responsible, positive thinking, and constantly learn new knowledge, comprehensive and final consideration of the project construction, the successful completion of the leadership to the various tasks. Over the years I was named the companys top ten young people, outstanding staff, writing papers, rationalization proposals, construction technology program has been rated as outstanding works.

The following is my work identification:

First, abide by the rules and regulations, perform job responsibilities.

In the cashier work, be able to adhere to the daily business at the end of serious rolling cash income, pay the amount of the registration book, the amount of money to pay the cash register, double the counter, double tube library requirements, self- And check with the cash inventory to ensure that the cash inventory and the actual inventory of cash, general ledger balance, consistent with the accounts do, accounts match. To seriously deal with the size of the RMB currency, the exchange of damage currency business, the whole point to be accurate, pier Qi, pick the net, tied tightly, seal clear, timely check on the water accounts and cash receipts and registers. In strict accordance with the vault storage system, do a good job in the Treasury of the custody of the Treasury in charge, with the same into the same.

Second, forge ahead in unity and work together to create a good working environment.

"Solidarity with others, and people are good" has always been my criteria for others. In the work, to unite colleagues, live in harmony, learn from each other, promote each other; in life, help each other, mutual concern and work together to create a harmonious atmosphere. At the same time, continue to self-positioning, update their ideas, improve service awareness, enhance service levels.

Third, enhance awareness of prevention, the implementation of the "three anti-one."

Security aspects. Work more and more, I can continue to enhance the sense of security precautions, the duty period to keep strictly in accordance with the "three anti-one" requirements, conscientiously implement the preventive measures, memorize anti-theft anti-riot plan, master, Kinds of prevention equipment, do a good job "three" anti-lock check. Often check the circuit, the phone is normal, to prevent the performance of the device is in good condition, when the abnormal situation can be handled on the spot on the spot processing, can not deal with the initiative to the upper reporting, etc., can always keep a clear head, enhance security awareness , And to ensure that the 24-hour duty-bound to keep out of control, to protect the credit of the property security.

Fourth, strengthen theoretical study, improve their overall quality.

Over the past year, I have been able to take the initiative to study the countrys financial policies and regulations and the spirit of the document issued by the association, strengthen ideological and moral construction, improve professional training, establish a correct outlook on life and values; to strengthen their sense of love and dedication To cultivate, to further enhance the sense of responsibility, dedication to the spirit of ownership of their own work, so that "dry line, love line, special line", firmly establish the "social Xing Xing I, To fully establish the "customer first" service concept, the quality of civilization as a measure of the work of the standards to strict demands on themselves, and consciously accept the supervision of our customers regularly carry out criticism and self-criticism, and strive to be a To participate in credit cooperatives to actively participate in various learning and training activities, conscientiously do study notes, and in practical work to be used in their spare time, self-study undergraduate courses, to participate in distance education examinations, for betterTo adapt to the needs of each job to lay a good foundation.

In short, the understanding of their work to have a higher awareness, and constantly strengthen themselves, improve work efficiency and accuracy, although in this regard there are still many deficiencies, such as financial accounting knowledge is not enough, the unit reform to beFurther understanding, etc., but I believe that the leadership of the care and support at the next level, with the enthusiastic help of colleagues, I will certainly do a better job stable and better for the new year will have better results.

1.Completed all the courses in the specialized field, obtaining good command of theoretic knowledge and experimental and DIY skill; Very adaptable and Good at leaning.

2.Having played a couple important roles in the student organizations, honing the interpersonal communication skills and organizational capability.

3.Easy-going and congenial, with a strong sense of responsibility and good team-spirit.

4.Having a wide range of hobbies, including oral English, music, movies and literature .

5.Fluent in oral English , with fairly good of reading and writing ability; Speaking authentic Mandarin-Chinese.

6.Good command of Computer skills: familiar with different versions of Windows OS and Office application software, able to program with C and Fortran languages, obtained some experience and understanding about other widely-used software like Autocad, Photoshop, Coreldraw and Dreamweaver.

Blink of an eye, busy in a quarter. I really feel in the past work, leadership and team in the workshop staff support and support, their gradually mature. Through the workshop organization of various training and activities, I have their own problems and deficiencies have a deeper understanding of the team management awareness has also been further improved. Here, I combine their own ideological situation, the actual work of self-criticism:

In the ideological, positive, positive motivated.

As a team leader, I am in the production, adhere to the quality, safety supervision, careful observation of the team members of the ideological trends, pay attention to communication methods and staff to make the greatest efforts and staff stand together to learn and work together to complete the team , Pay attention to the training of staff ability, at work, I know the importance of learning, seize every opportunity to earnestly study the excellent monitor, in continuous learning and practice constantly improve their management level and communication skills.

At work, dedication and love, self-discipline.

In work, strict self-discipline, strict to use, according to the size of life. Adhere to the implementation of various systems, from time to time for the sake of employees, according to the rules of the company and the power to move the shop; a realistic man, the team raised a variety of staff questions never avoid, the team also received the honor, to create a dynamic, team.

Self-existing problems:

1, policy theory Water evaluation is not high enough, the theory of learning is not enough, the management level is not high.

2, the first mode of consciousness is not strong. On their own lax, the standard is not high, just flies, not flies hard, can not use advanced words and deeds affect and drive employees. The work of the lack of first to strive for excellence and fighting spirit of innovation, study and study the theoretical knowledge and professional knowledge is not a certain height.

3, lack of awareness of innovation, the lack of bright spots.

4, open-minded enough, failing to easily impatient, lack of control

Fourth, the corrective measures:

1, to strengthen theoretical study, and constantly improve their political quality. Consciously strengthen the exercise to the idea of self-discipline armed with their own minds, to those dedicated, positive, innovative colleagues to learn, work more brains.

2, in order to be a high sense of responsibility, dedication, hard work, solid, the courage to advance the work to complete the task, in the process of regional management of the workshop team to a higher level.

3, establish team team spirit. As a team leader, I want to always keep a clear head, keep up with the pulse of the times, give full play to the subjective initiative. To consciously strengthen the exercise, at work, learn to sum up and observe, to improve the sense of pioneering and innovative

4, I am concerned about the labor and new interns is not enough. In the future study, work more concerned about them, usually more chat to understand the ideological trends.

In short, as a team leader in the work to play an exemplary role, should be based on their own work, and strive to do their jobs, love and respect their jobs, fine drilling business. In the future study and work, I will continue to reflect on the continuous progress in the reflection. Humbly accept my colleagues around me to make suggestions and opinions, and strive to improve themselves, so that their continuous progress, play an exemplary role for the team to serve good, do a monitor should do the obligation, and strive to be a good team leader.

Students join the team Hualian nine months time, I made a full scholar emotional changes that can be independently buyer. Young people with enthusiasm for the work, tireless refined every day. Strong adaptability and good communication skills with leadership and assistance, work colleagues. Since the work of eight months, I have learned how to better understand the intent of the leadership, the better abide by our obligation to work, proactive work to identify existing problems, solve problems, and develop a good at summary, purposeful plan good habits. Here, the 20xx annual work points the following four aspects of self-assessment:

First, the discipline, strictly comply with the rules and regulations already in-depth bone marrow, respect for leadership, solidarity and co-workers have become potential consciousness. Strict demands on themselves, never late or left early. Depending on the company as their home, take good care of the companys various public facilities, set an example proactive maintenance, cleaning office actively regional health, love and protect our excellent office environment, improve their overall quality. Because I know that in future work, corporate culture, the environment is the need of each of us to love.

Second, in the business of learning, he has been asking himself accelerate the pace of progress, the only way the business is not lost on anyone. Although there is no aspect of procurement experience, but I have been xiu basic skills, you will learn professional knowledge into energy. Superiors to learn the essentials of business, consult work skills, problems with the right attitude, careful rigorous analysis work encountered. Actively participate in the training organized by the company, a broad understanding of business knowledge and broaden the work of thinking. In the work on their own and responsible attitude, there are plans to carry out targeted research, and the corresponding record focus, learn new things, so that control of the situation in negotiations with suppliers.

Third, the care of others in terms of ideological training, keep its promises, resolute honest, friendly easy-going, willing to sacrifice. Looking back along the way, bit by bit, only to find that not only love my job, my department, and I was so loving colleagues around me. "Many hands make light", I was to fire the general enthusiasm infected colleagues around Hualian with love and write a brilliant tomorrow.

Fourth, at work, down to earth, diligent, humbly accept criticism superiors guidance, active exchange learning experiences with colleagues. Because I know that in such a good extended family often look back at the road traveled, summing up the past, manage the present. Firmly we believe that through their own efforts, can do better in the only good team.

Looking back, I have matured a lot, pay a lot. But these were not enough, waiting for me to do, there are many places to improve. In 20xx I want to continue to improve their professional training and practical operation level. Strengthen collaboration with other departments and communication skills for future work between various departments better to lay a solid foundation for cooperation. Better to learn from other colleagues to approach the problem, the problem of empathy angle. With a grateful heart, never give up in the face of difficulties, more full of passion for work beyond the self, self-improvement. Hualian tomorrow for our hard work ahead, and Hualian same oath to live and grow.

I engaged with a single and procurement work more than two years, has a good professional attitude, realistic and motivated, sincere people, good communication skills, ability to adapt. It has strong market research capabilities and organization, communication and coordination skills. Skilled use of office software. Familiar factory purchasing, quality, production, warehouse and a series with a single process. Of machinery products more familiar with the material, with abundant sources of supply to meet the procurement requirements of the product. And look for a good price, parity, bargaining power, the independent development of new suppliers and maintenance of the material procurement process tracking, return, replacement and other abnormalities can be handled independently. Strong negotiation and coordination

years have come, in the past year, I am in the leadership and the masters strong support, easy to spend a wonderful year, after a lot of unforgettable things, let me also become Some mature than before.Looking back, there are several aspects:

1. Ideologically, study Deng Xiaoping Theory conscientiously, pay attention to political theory study on one hand, try hard to improve political accomplishment, on the other hand strengthen the study of business knowledge, improve business ability. In the leadership of the careful guidance and the enthusiasm of the old master of help, there are plans for the theoretical knowledge and the study of turning technology.Seriously do a good job within the division. In doing these work at the same time I also submitted to the party to join the party application, in daily life, work, I have been a party members request to ask themselves,

2, at work, to abide by the rules and regulations, practical work hard, shape their image has always been to maintain a modest attitude to learning, unity and cooperation, and effectively enhance the sense of responsibility, service awareness and coordination capabilities, so that their overall ability to improve. In the past year I worked as a driver of the electric car factory in the efforts to complete the task assigned to the leadership at the same time, trying to supplement the relevant knowledge of turning from the map processing, every tiny step I carefully consider, select the fine Quick and easy way to solve the problem of work Chung, encountered or do not understand when I humbly as the old master to ask until you figure out so far.

In security, to give yourself hang an alarm, always remind yourself to pay attention to safety. Life is priceless security for the safety of workers is the greatest happiness, happily work peacefully home

Looking back at the past, I thought, learning, work has made some progress, but there are still shortcomings, the level of theoretical knowledge is still lacking, growth is still relatively slow, there is still a gap from the expectations of leadership, Quality also need to further improve. The new year means new opportunities and new challenges.

After graduating from school work more than a year, under the care and training unit leadership, colleagues help of friends, through its own efforts, whether it is learning or work, we have made great progress and harvest, just one year, it is the wealth of experience of my life!

Work for a year, but also a year of learning, in terms of ideology and theory, not short I learn advanced ideas and mature theory, remain at the forefront of society, with the strongest weapon to arm themselves with the latest theory Enrich themselves. In operation, wherever, whenever, strict demands on themselves, study hard, striving to expert. It is relying on such a firm conviction, gradually becoming more mature. Work for a year is the continuous accumulation of the year, full use of the knowledge, quality and quantity to complete the task, and has accumulated experience in one after another of the project, lessons learned, a suitable own work and learning method.

Instant, the past year, from a student to a social worker, the changing role of large, independent will suddenly face their own life, had also been lost, after a year of trials and hardships, learn some, also a lot of sentiment, finally, I want to say is, diyifanwen.com work achieved little success, thinking little progress, in my whole life journey is a small sum, and will need to continue to enhance learning, continuous summary, negation of negation and then the establishment of a complete outlook on life, their own life journey to draw a perfect end.

After graduating from school work more than a year, under the care and training unit leadership, colleagues help of friends, through its own efforts, whether it is learning or work, we have made great progress and harvest, just one year, it is the wealth of experience of my life!

Work for a year, but also a year of learning, in terms of ideology and theory, not short I learn advanced ideas and mature theory, remain at the forefront of society, with the strongest weapon to arm themselves with the latest theory Enrich themselves. In operation, wherever, whenever, strict demands on themselves, study hard, striving to expert. It is relying on such a firm conviction, gradually becoming more mature. Work for a year is the continuous accumulation of the year, full use of the knowledge, quality and quantity to complete the task, and has accumulated experience in one after another of the project, lessons learned, a suitable own work and learning method.

Instant personal work between self-identification, the past year, from a student to a social worker, the changing role of large, independent will suddenly face their own life, had also been lost, after a year of trials and hardships, learned some, but also a lot of sentiment, and finally, I want to say is that the work achieved little success, thinking little progress, in my whole life journey is a small sum, and will need to continue to strengthen learning and summary, negation of negation and then the establishment of a complete outlook on life, their own life journey to draw a perfect end.

I have had a great time during this period of work, and although this is not my job, I have always had a modest, responsible and responsible attitude. Through their own continuous efforts, whether ideological, learning or work, have made considerable development and tremendous gains.

i hold office here since nov.1st,20__,obedience to leadership,willing to work,and shows assiduity in charge of all my work,well professional ethics,well-behaved,endure hardship and work hard,do everything without complaint despite hardships and

criticism.in a short time,im quickly familiar with and skilled in cashier,which is strong specilized in fanacial work.during this

period,mistake never occurs.united with relationship between superior and subordinate.under arrange with superior,i have accomplished every work as quickly and correctly as i can,whether do my bit or

not.because of young,ill put all my resources of energe in the company.in the future while accomplish my own work,strengthen the study of every work,such as business,etc.continuing to raise and perfect to own business quality and efficiency.ill never fail to live up to what the learships trust in and expect of me.make my own contribution to the company grow stronger。

Two weeks of measurement practice, I got a more comprehensive, systematic exercise, but also learned a lot of books can not learn the knowledge and skills.

I remember the first week of internship, we are very excited, a week down we feel very relaxed, rest for two days, began measuring practice, I followed the teacher to find the control point, then everyone is still excited, that the next Of the week should also be very easy, it is not.Although a bit lucky, but we all learn a lot, only a lot of ordinary "a lot of shopping" to learn things. I like to think, like the summary, so I summed up the following points:

Grow up, to try to take some responsibility. We are born with a kind of inertia, whether individuals, or a team, if it is in an inert atmosphere, that she (people) efficiency will not be high, but if everyone has a strong sense of responsibility, Take some responsibility, then the efficiency is not only improved, and the task will be completed very well.

Infectivity is very important. In a team, in order to have a good atmosphere, the first person to put forward the idea of thinking is very important, because later people can not help but have a herd mentality. If he (she) the idea is positive, then someone will actively think of some problems. On the contrary, the whole team into a negative atmosphere. Therefore, each of us should actively think about the problem.

Think a lot. What is the internship, internship is the theoretical knowledge into their own knowledge of the process. Internship process only a lot of thinking, in order to digest a lot of knowledge, but also extends a lot of previously unknown. Teamwork, through thick and thin. This is a cliché, but in this practice have to mention, because it is everywhere, remember very clearly that many times we are on the measurement site for lunch; is that we all get up early, and then in the cold Whiz in the operation, everyone in the trembling; we are carrying the instrument touched the black home. All this bitter and happy, we all bear together. Through thick and thin, we are happy! Learn to compromise. Compromise is the highest art, in the process of cooperation, inevitably there will be some conflicts, then we need to calm down to think about the solution to the problem, everyone has done some concessions, then things are easy to solve.Do the most "humble" work, tree arrogant self-esteem. A good team, everyone needs a little hard work, not afraid of dirty, not afraid of tired, rather than pushing three or four. Only everyone is actively doing everything, in order to achieve the purpose of the internship, so that everyone is familiar with every aspect.

To calm. Whether doing things or a man, we should learn to calmly face. Remember half of the picture, the teacher pointed out that we are wrong method of mapping, we have thought would be wrong; remember the distance with a tape measure we have thought about measuring only once. But in the end we did not do, now think of it, this is right! Frankly, is what we want life.

Internship is completed, the internship is the most unforgettable day of my life, very afraid of the beginning, and now want to come, the day is over, and can get good interns, so get a revelation: no matter what difficulties,Do not lose confidence in yourself.

Our company development and production of hook-tail box, on the heart plate, support blocks and other new railway products, transferred from June

QC department after the initiative to help guide the leadership of new product debugging and production, will know and in the work should focus on issues and front-line staff one by one detailed, auxiliary production work carried out smoothly. In the independent sent to the machine shop, the timely and timely follow up the progress of each new product processing and the establishment of accounting, so that each new product from the machine into the workshop to start the process, each step real-time monitoring. Timely detection and feedback of new products in the process of the existing problems and to assist the technology sector to improve the processing technology. And ensure the successful completion of mechanical processing of sample samples for crcc certification of "Forged steel upper plate for railway wagons", "13b forged coupler end frame" and "17 forged hooktail frame".

◆ personal strengths and weaknesses

I learned mechanical manufacturing, and previously engaged in Haier is mainly automated robotic aspects of testing, came after the company has only been working in the machine shop, the knowledge of the relatively lack of forging. When I first came to the QC department of the forging workshop, I almost did not know the companys forging products. After consulting with my colleagues, I quickly learned about the performance and key points of each product. . I am from the machine plus apprentices began to come step by step, mechanical processing, programming knowledge more solid. In the machine after the workshop, not only to ensure that machine products and timely detection, and can be found in the process of the hidden dangers, to avoid the occurrence of quality accidents, auxiliary site production. ◆ personal development goals in the company

Quality inspection work is not a simple size detection. At present our departments involved: forging detection, machining finished product testing, tensile, impact test, metallographic test, hardness, magnetic detection, ultrasonic testing. Debugging products related to bridge bearings, construction machinery, coal mining machinery, truck parts, etc., processes heating, forging, roll forging, heat treatment, machining, etc., these things are the wealth of the hands of the company in the detection sector is not To so many things. In future work, I will, as always, people: people with good, the work: to perfect, the quality: strict hold. And constantly strive to learn and expand their knowledge, assiduously enhance their business level to look forward to the development of the company to do their part.

◆ recommendations for the company

Attention to detail, emotional trivia in life to increase points, in principle, equality and discrimination on the issue of everyone, improve employee sense of belonging and well-being, to retain talent to create a win-win situation. I listed below a few examples of Qingdao Haier Mold Co., Ltd.: employee birthday, wedding anniversary, the birthday of the children and other commemorative date, timely delivery of small gifts or leave, pull the distance between the company and employees to improve staff members of the familySatisfaction and Support.

In the factory in charge of leadership and workshop under the correct leadership of the party and government departments in the various functions of the sincere cooperation and support, and always adhere to the success of this principle, the priority of efficiency, focus on " Principle, and make joint efforts to explore, making this years coking plant operating conditions and related management work more good and standardized.

1, as a party member cadres, can be strict demands on themselves. Actively participate in various political studies, focusing on the promotion of political theory.Self-respect, self-reflection, self-encouragement, alarm bells to plant regulations, factory discipline for their own actions, set the public servant consciousness.

2, can be placed in position, and other team members live in harmony. In charge of the work of the mouth to do work in place not offside, the courage to not shirk responsibility, respect for everyones work, truth-seeking and pragmatic, and establish a good style of work.

3, based on their own, do a good job in the workshop equipment management. First of all, in accordance with the standards of mechanical and electrical equipment to upgrade standards, and gradually improve the workshop equipment management system. Second, in their daily work, adhere to the daily maintenance and planned maintenance of the principle of combining.Third, do a good job overhaul of plant equipment management. Fourth, to strengthen the spare parts repair old and waste work. Fifth, strengthen the workshop energy conservation management work

Time flies, a flash of the new semester is about to begin, and slowly away from us in 20xx, the first semester of university life is officially announced the end, but the year 20xx, which will always have our beautiful Memories. This year we for our own goals, dreams, we cried we laughed, we also experienced the University of study and life, and here to get to know a lot of good students together, good friends, good brothers.

20xx was a very important and memorable year for me because there was a big change in my life both in my studies and in my life. University of the time day, week, month in the past, we met each other new students, together with military training, learning together, their choice of favorite associations. University life is very rich and very free, some people are busy, leisurely you can 24 hours at the computer game, but some people are busy, can be busy to the day without even the rest of time, I think the University has Two kinds of people, play dead and busy dead people, in fact, this is like an endless ladder on both sides, we are beginning to set sail in the middle, forward and backward are in an idea. I like the latter, so tired though, but full.

Recalling the freshman, I also have a lot of things to do in many ways is not good enough. In view of the lack of last semester, I feel we should try to start from the following aspects, and strive to do: 1 learning

(1) the study of specialized courses, should be clear objectives, take the initiative to overcome various learning difficulties, and constantly improve their interest in learning.

(2) to treat public courses, to recognize its practical value, and strive to indirect interest in public courses into direct learning interest.

(3) the study of elective courses, attention should be paid to only stay in the shallow understanding and understanding of the phenomenon.

(4) adjust the learning method.

After entering the university, the teacher-led teaching model has become a student-led self-learning model. Teachers teach knowledge in the classroom, the students not only to digest the understanding of classroom learning content, but also a lot of reading the relevant books and literature. It can be said that the level of self-learning ability to become the most important factors affecting academic performance. In college, the content of teaching content, including more and more large, sitting alone in the classroom hard to read is difficult to adapt. We must learn to use modern high-tech teaching methods to master and enhance the knowledge learned. Such as the Internet, libraries, to get a lot of information to improve their ability. Of course, college freshmen have to change some of the original concept: in the university, the test scores are not the most important indicators to measure people, people pay more attention to the comprehensive ability of the cultivation and overall quality improvement. Here, the competition is potential, all-round.

Interpersonal relations

Communication is the most important part of interpersonal relationships, is between people to pass emotions, attitudes, facts, beliefs and ideas of the process, so good communication refers to a two-way communication process, not a person in speech, Or play the other side to sing a one-man show, so in the study of life we should listen to each others heart to say what? To understand each other thinking? The other side feel? And their own ideas back to each other. So I build good interpersonal relationships, we should start from the following aspects: the depth of self-awareness and acceptance; often sincere attitude; humble and gentle heart; moderate self-expression; respect and appreciate others; seek common values partner . 3 reasonable time arrangements

Students learning time is limited, reasonable time, great significance. I feel that we should make full use of the study time during the day because of good mental state during the day, memory, active thinking, daytime learning efficiency is equivalent to one and a half hours of the night. Every day before the class we are in the mind to do a simple learning plan, set yourself a small goal, to prevent unintended lectures. Pre-school supplies ready to learn what to do a simple preview, focus on lectures in class. Also, do not just focus on the whole time. Second, to co-ordinate arrangements for extra-curricular learning time, to deal with things for the priorities, you can use the "ABC" time classification, according to prioritized tasks are divided into A (important), B (minor), C (general) three. Important things to do first; secondary things, then deal with; flexible handling of the general things. In doing homework to adjust their state, as far as possible to make the brain, physical, emotional state in the best, the pursuit of higher efficiency.

Time flies, in a blink of an eye we in the beautiful campus of Agricultural University ushered in the sophomore of the second semester, each new start is a challenge, I believe that in this new semester, we can continue to Challenge yourself, continuous progress, the pursuit of a more exciting life!

3, I am easy to learn, integrity, dedication, strong sense of responsibility, have a strong team spirit, positive work seriously, rigorous and responsible. It combines internal and external personality, adaptable, honest, good interpersonal skills, have relevant expertise and seriously. Careful, patient work attitude and good work ethic. I believe in team spirit of serious and responsible work, hoping to be able to do things better!

years is approaching, review the past years, a sense of almost thousands. During the period to seriously abide by the rules and regulations of the company, love plants such as love home, but also in the work of constantly demanding their own, with the production of the process work, carefully completed the task of leading the layout. Diligent and enterprising, to be creative, to continuously improve their own work efficiency, work problems can be found in time to report to the leadership and to find a solution. In order to make greater contributions to the development of the company.

Forklift is the indispensable tool for production, as a forklift driver, must adhere to the post, serving the production of the work. Forklift with the class every day must be used with the packaging class to receive bags, finished packaging storage placed; with the use of handyman with additives, from the use of oil raw materials, empty oil drums finishing.

First, the work results

1, in line with the packaging class to receive the work of the bag, 20 minutes per shift to work in advance to help with the work of the packaging.

2, the production peak season, seven packaging lines at the same time boot, forklift task overload operation, the two forklift drivers must be division of labor, it takes more than an hour to return to the packaging mouth to help packaging finished product storage work. In the meantime, another forklift driver with seven production lines need to work in the library, it must have a more skilled professional skills and flexible thinking ability to complete the task in an orderly manner. In such a tense working environment, I can not disrupt, in strict accordance with the warehousing requirements of finished products placed in the work.

3, in the use of additives, with the mixed with a good job, a clear position of additives placed to help the correct use of good handyman, including the variety, quantity, in strict accordance with the laborers with a single recipients associated with the requisition process.

4, fork grease must be clear that the use of phospholipids and fish oil situation, in strict accordance with the warehouse managers logo fork with, if the warehouse manager failed to do a good sign, must first communicate with the warehouse manager to do a good job marking, eliminate the use of errors Or can not be used on a first-in-first-out basis. And fork to the workshop before the use of varieties, regional requirements placed, and in the pumping process in strict accordance with the requirements of the fork with the fork into the corresponding oil pool, no personal reasons affect the production, to ensure the smooth development of production. Before get off work, assist the handyman to store the empty oil bucket into the oil bucket area and keep the sanitation of the production area.

First, have good work skills

Cashier external units more settlement, is an image window; internal is a service window, internal staff reimbursement is frequent, is a masters. So I have to do is not confused, tickets on the spot error-free, inventory cash fast and accurate, not only to grasp the financial policy, dry up the work also handy, have strong operational capacity, plans, computer, Money everything is accurate, busy and not chaos.

Second, the sense of innovation

In the eyes of many people is a major invention of innovation is what, it is not true, as long as the actual work from the start, to improve the actual work, to promote practical work to a new level, is innovation. I have this spirit. I work for the staff reimbursement of travel expenses, reimbursement and the original invoice paste sheet, are made through my reasonable proposals after the improvement of the voucher paper size selection, the original document paste single filling format, the original paste Single requirements of the content design, font layout requirements, printed on the back of the original paste operator note, not only to improve the work, more importantly, is to put the accounting file binding and management.

Third, there is a responsible attitude

1, the strict implementation of cash management and settlement system, regular checks to the accounting cash and accounts and found that the amount of cash does not match, so that timely treatment.

2, the timely recovery of the companys income, out of receipts, cash withdrawals in time to the bank, never sit cash.

3, according to the basis for providing accounting, teaching staff wages and other timely payment of funds to be paid.

Fourth, there are honest and clean spirit

Constantly improve their professional ethics, the cashier is a special occupation, it is in contact with a lot a day a lot of money, tens of thousands of banknotes, really worthy of the hands of family wealth. Without good professional ethics, it is difficult to pass the "money off." Compared with other accountants, as a cashier I should strictly abide by.

Work always have errors, as long as we find out the reasons from each trip, summed up the lessons, failing to make the same mistakes, our work will continue to progress, slowly there will be improvement, in fact, excellent On the original in the occupation of a good work habits.

In the past year, led by the leadership of the plant leadership led by the workers through the joint efforts of colleagues, and through their own positive efforts, as equipment maintenance workers I successfully completed his own work. I do a year on the work of a serious summary. The following is my summary of this years work model essay:

First, the work attitude, ideological work

I am keen on my work, strict self-discipline, abide by the rules and regulations of the factory, strictly to the ball itself, put the work position, and always maintain a "modest, prudent, self-discipline, positive" attitude, guidance and guidance of colleagues in leadership With the help of always diligent study, proactive, and strive to improve themselves and always work hard, conscientiously complete the task, perform good job duties. Adhere to the ideals of building a good factory, a firm increase in workers income beliefs. Continue to strengthen learning, a solid work of their own technology!

Second, do their own work

To do a mechanic, to deal with their own work to understand a clear, familiar and skilled their work. Have all the machines and equipment to understand, but also have the ability to respond to failure, deal with the equipment may occur at any time.

To meet the needs of the production schedule, our unit of equipment, although the new equipment, but also frequent failures, such as machine washing machine, no major problems, minor problems in the maintenance process, and gradually improve the machine cleaningMachine awareness, so that small problems can be dealt with quickly, as well as liquid sandblasting machine, in use, there is always a failure to plug the nozzle, so that can not work, broken through the brain, after operator description Cause of the failure, my analysis, the glass beads used in diameter than in the past, and the specifications are not uniform, resulting in a blocked nozzle, after a bold improvement, increasing the nozzle aperture, the liquid blasting machine is normal work , The tunnel cleaning machine, always produces the transmission chain does not move, before the adjustment of friction, you can, but once, how to adjust the friction, does not work, after analysis, that the friction coefficient is not enough, Found, really inside the oil, after careful cleaning, remove the oil, everything is normal, and so a series of maintenance work, we must understand the principle of equipment in order to good maintenance, which is my years of experience in maintenance , I will try to study, once understood, they suddenly realized, looks complicated, as long as understand, it will be simple, I not only bear the equipment maintenance work, but also completed a lot of tooling production .

For example, several engine-based experimental bench design, mobile engine rack, and so on dozens of pieces, this year we re-manufacturing engine varieties increased a lot, not the previous test bench, the workshop down the task , We immediately accept, and actively to complete, from the concept to the leadership through the design intent, and then cutting the welding, production, and so on, until the engine is placed, commissioning, delivery, each engine model of the experiment Have to go through our first process, like the troops and horses do not move forage first, when a variety of engines in my production on the bench test, I feel very honored, thank the leadership to me such a platform, but also Feel the excitement of the results of our work, but also for our development in the manufacture of pride, but these will make me work harder, modest and prudent to learn from others, as much as possible to improve their ability to work themselves in their own Of the posts to play to the maximum effect, faster and more

Efficiency of the completion of their own work, but also enable us to get the maximum benefit units, so that my work and the harvest workers can achieve a balance, so I am more motivated, more confident work. Interpersonal relationships with other colleagues are also important because a person s ability is limited and the success of everything depends on the collective wisdom. Therefore, it is the prerequisite for the successful completion of the tasks assigned by the leader to unite with the colleagues , This is not just work, usually life is also the case, so the unity of other colleagues is not only a personal thing is a duty to work!

I have a very good relationship with my colleagues, often help each other, because the mechanic I started only one, there is a maintenance worker, a good relationship, and I work with colleagues, I respect, at work, mutual cooperation , Is to improve the efficiency of a lot, for example, in the welding oil depot anti-theft window, the door of the test station in the production of sandblasting between the asbestos roof, give sandblasting between the welding air pipe, we collectively Homework, mutual cooperation, initiative, the task is completed very quickly, this is the power of unity, to play the power of everyone in order to make work progress faster. I deeply understand. In the repair of the old and waste conservation, but also everywhere carefully, in the production of rain roof, with the waste angle, in the welding air pressure pipe, the use of the plant is the retirement of threading pipe.

Third, review the past, look to the future

For the past gains and losses, I will learn from the favorable factors to strengthen their ability to work, the negative factors in their work after the exclusion, a year of work for me to continue to make progress on the road to make certain , I believe that through my efforts and colleagues, as well as the leadership of the guidance, I will be a good staff, give full play to my ability, but also to thank the leadership of this a suitable job position, so I can For the community to make their own contribution.Over the past year, I have done the best, I believe that in the future work for the development of remanufacturing, in order to improve the income of workers, I will continue to continue efforts. Although my work has been unsatisfactory in the past year, I believe that as long as I am in the post one day, I will make my best efforts to use all my energy and ability in my work. He must be able to do a good job.