进口转出口优秀20篇

成套设备进口合同

2.3出卖人派遣有经验、健康和称职的技术人员到合同工厂现场对合同工厂的施工、安装、试车、投料试生产与考核进行技术指导。其人数、技术服务范围和待遇条件等见本合同附件五。

2.4出卖人负责培训买受人派遣的技术人员，其人数、培训地点，培训范围见本合同附件六。

2.5本合同签订后________年内，根据买受人的要求，出卖人有义务以优惠价格提供买受人为本“合同工厂”正常运行所需的全部备品备件。届时双方另签协议。 第三章 价格

3.1出卖人按本合同第二章规定提供合同工厂“设备”和“技术资料”的总价为_____________（大写：_______________）。

3.2上述合同总价的分项价格如下：_____________________________

3.2.1 机械设备部分：

（1）设备和材料费；

（2）备品和备件费；

（3）设计费；

（4）技术资料费；

（5）技术服务费；

（6）技术培训费。

3.2.2 技术转让部分：

（1）技术转让费；

（2）设计费；

（3）技术资料费；

（4）技术服务费；

（5）人员培训费。

上述分项价格清单，详见附件四。

3.3上述合同总价中的设备部分为fob港口买受人指定的受载船只船面交货的固定价格，并包括装船费、包装费以及将货物装到买受人所指定的船面以前的一切费用。上述合同总价中的技术资料部分是指将技术资料在________交付以前的一切费用。 第四章 支付（方案一）

4.1本合同买卖双方的支付均以电汇（t/t）进行。买受人向出卖人的付款应通过北京中国银行付给________银行，出卖人向买受人的付款应通过________银行付给北京中国银行。

4.2本合同第三章所规定的合同总价，按以下办法及比例由买受人通过北京中国银行支付给出卖人。

4.2.1 合同总价的________%计________（大写：________），买受人在收到出卖人提交下列单据经审核无误后三十天内支付给出卖人。

（1）出卖人国家有关当局出具的有效出口许可证的影印本一份，或有关当局出具的不需出口许可证的证明文件一份；

（2）银行出具的以买受人为受益人、金额为合同总价的________%、不可撤销的保证函正副本各一份（保证函格式见本合同附件七）；

（3）金额为合同总价的形式发票一式六份；

（4）即期汇票一式二份；

（5）商业发票一式六份。

上述单据出卖人应于本合同生效之日起三十天内提交。

买受人在收到出卖人按本合同第五章规定的货物装船通知后三十天内，经由北京中国银行出具以出卖人为受益人，金额为合同总价的________%的不可撤销的保证函给出卖人（保函格式见本合同附件八）。

4.2.2 合同总价的________%，计________________（大写：________________），买受人在收到出卖人提交的下列单据经审核无误后三十天内支付给出卖人：

（1）全套清洁无疵、空白抬头、空白背书，并注明“运费到付通知目的港中国对外贸易运输公司”的海运提单正本三份、副本三份；

（2）商业发票一式六份；

（3）即期汇票一式二份；

（4）装箱明细单一式六份；

共2页，当前第2页12

进口合同范本【英文版】

在进口合同中，大多数是使用F.O.B.价格条件成交，只有少数零星进口商品使用C.I.F.条件，支付条件绝大多数是使用信用证方式。进口合同格式一般由我方备制，一式二份，经我方签章后，递交对方签回一份，留档备查。

进口合同范本【英文版】

买方：__________________________

The Buyer:________________________

地址： __________________________

Address: _________________________

电话(Tel):___________ 传真(Fax):__________

电子邮箱(E-mail):______________________

卖方：___________________________

The Seller:_________________________

地址：___________________________

Address: __________________________

电话(Tel):_________ 传真(Fax):___________

电子邮箱(E-mail):______________________

买卖双方同意按照下列条款签订本合同：

The Seller and the Buyer agree to conclude this Contract subject to the terms and conditions stated below:

1. 货物名称、规格和质量(Name, Specifications and Quality of Commodity)：

2. 数量(Quantity)：

允许____的溢短装(___% more or less allowed)

3. 单价(Unit Price)：

4. 总值(Total Amount)：

5. 交货条件(Terms of Delivery) FOB/CFR/CIF_______

6. 原产地国与制造商 (Country of Origin and Manufacturers):

7. 包装及标准(Packing)：

货物应具有防潮、防锈蚀、防震并适合于远洋运输的包装，由于货物包装不良而造成的货物残损、灭失应由卖方负责。卖方应在每个包装箱上用不褪色的颜色标明尺码、包装箱号码、毛重、净重及“此端向上”、“防潮”、“小心轻放”等标记。

The packing of the goods shall be preventive from dampness, rust, moisture, erosion and shock, and shall be suitable for ocean transportation/ multiple transportation. The Seller shall be liable for any damage and loss of the goods attributable to the inadequate or improper packing. The measurement, gross weight, net weight and the cautions such as "Do not stack up side down", "Keep away from moisture", "Handle with care" shall be stenciled on the surface of each package with fadeless pigment.

8. 唛头(Shipping Marks)：

9. 装运期限(Time of Shipment)：

10. 装运口岸(Port of Loading)：

11. 目的口岸(Port of Destination)：

12. 保险(Insurance)：

由____按发票金额110%投保_____险和_____附加险。

Insurance shall be covered by the ________ for 110% of the invoice value against _______ Risks and __________ Additional Risks.

13. 付款条件(Terms of Payment)：

(1) 信用证方式：买方应在装运期前/合同生效后__日，开出以卖方为受益人的不可撤销的议付信用证，信用证在装船完毕后__日内到期。

Letter of Credit: The Buyer shall, ______ days prior to the time of shipment /after this Contract comes into effect, open an irrevocable Letter of Credit in favor of the Seller. The Letter of Credit shall expire ____ days after the completion of loading of the shipment as stipulated.

(2) 付款交单：货物发运后，卖方出具以买方为付款人的付款跟单汇票，按即期付款交单(D/P)方式，通过卖方银行及_____银行向买方转交单证，换取货物。

Documents against payment: After shipment, the Seller shall draw a sight bill of exchange on the Buyer and deliver the documents through Sellers bank and ______ Bank to the Buyer against payment, i.e D/P. The Buyer shall effect the payment immediately upon the first presentation of the bill(s) of exchange.

(3) 承兑交单：货物发运后，卖方出具以买方为付款人的付款跟单汇票，付款期限为____后__日，按即期承兑交单(D/A__日)方式，通过卖方银行及______银行，经买方承兑后，向买方转交单证，买方在汇票期限到期时支付货款。

Documents against Acceptance: After shipment, the Seller shall draw a sight bill of exchange, payable_____ days after the Buyers delivers the document through Seller’s bank and _________Bank to the Buyer against acceptance (D/A ___ days). The Buyer shall make the payment on date of the bill of exchange.

(4) 货到付款：买方在收到货物后__天内将全部货款支付卖方(不适用于FOB、CRF、CIF术语)。

Cash on delivery (COD): The Buyer shall pay to the Seller total amount within ______ days after the receipt of the goods (This clause is not applied to the Terms of FOB, CFR, CIF).

14. 单据(Documents Required)：

卖方应将下列单据提交银行议付/托收：

The Seller shall present the following documents required to the bank for negotiation/collection:

(1) 标明通知收货人/受货代理人的全套清洁的、已装船的、空白抬头、空白背书并注明运费已付/到付的海运/联运/陆运提单。

Full set of clean on board Ocean/Combined Transportation/Land Bills of Lading and blank endorsed marked freight prepaid/ to collect;

(2) 标有合同编号、信用证号(信用证支付条件下)及装运唛头的商业发票一式__份;

Signed commercial invoice in ______copies indicating Contract No., L/C No. (Terms of L/C) and shipping marks;

(3) 由______出具的装箱或重量单一式__份;

Packing list/weight memo in ______ copies issued by__;

(4) 由______出具的质量证明书一式__份;

Certificate of Quality in _______ copies issued by____;

(5) 由______出具的数量证明书一式__份;

Certificate of Quantity in ___ copies issued by____;

(6) 保险单正本一式__份(CIF 交货条件);

Insurance policy/certificate in ___ copies (Terms of CIF);

(7)____签发的产地证一式__份;

Certificate of Origin in ___ copies issued by____;

(8) 装运通知(Shipping advice): 卖方应在交运后_____小时内以特快专递方式邮寄给买方上述第__项单据副本一式一套。

The Seller shall, within ____ hours after shipment effected, send by courier each copy of the above-mentioned documents No. __.

15. 装运条款(Terms of Shipment)：

(1) FOB交货方式

卖方应在合同规定的装运日期前30天，以____方式通知买方合同号、品名、数量、金额、包装件、毛重、尺码及装运港可装日期，以便买方安排租船/订舱。装运船只按期到达装运港后，如卖方不能按时装船，发生的空船费或滞期费由卖方负担。在货物越过船弦并脱离吊钩以前一切费用和风险由卖方负担。

The Seller shall, 30 days before the shipment date specified in the Contract, advise the Buyer by _______ of the Contract No., commodity, quantity, amount, packages, gross weight, measurement, and the date of shipment in order that the Buyer can charter a vessel/book shipping space. In the event of the Sellers failure to effect loading when the vessel arrives duly at the loading port, all expenses including dead freight and/or demurrage charges thus incurred shall be for the Sellers account.

(2) CIF或CFR交货方式

卖方须按时在装运期限内将货物由装运港装船至目的港。在CFR术语下，卖方应在装船前2天以____方式通知买方合同号、品名、发票价值及开船日期，以便买方安排保险。

The Seller shall ship the goods duly within the shipping duration from the port of loading to the port of destination. Under CFR terms, the Seller shall advise the Buyer by _________ of the Contract No., commodity, invoice value and the date of dispatch two days before the shipment for the Buyer to arrange insurance in time.

16. 装运通知(Shipping Advice)：

一俟装载完毕，卖方应在__小时内以____方式通知买方合同编号、品名、已发运数量、发票总金额、毛重、船名/车/机号及启程日期等。

The Seller shall, immediately upon the completion of the loading of the goods, advise the Buyer of the Contract No., names of commodity, loading quantity, invoice values, gross weight, name of vessel and shipment date by _________ within ________hours.

17. 质量保证(Quality Guarantee)：

货物品质规格必须符合本合同及质量保证书之规定，品质保证期为货到目的港__个月内。在保证期限内，因制造厂商在设计制造过程中的缺陷造成的货物损害应由卖方负责赔偿。

The Seller shall guarantee that the commodity must be in conformity with the quatity, specifications and quantity specified in this Contract and Letter of Quality Guarantee. The guarantee period shall be ______ months after the arrival of the goods at the port of destination, and during the period the Seller shall be responsible for the damage due to the defects in designing and manufacturing of the manufacturer.

18. 检验(Inspection) (以下两项任选一项)：

(1)卖方须在装运前__日委托______检验机构对本合同之货物进行检验并出具检验证书，货到目的港后，由买方委托________检验机构进行检验。

The Seller shall have the goods inspected by ______ days before the shipment and have the Inspection Certificate issued by____. The Buyer may have the goods reinspected by ________ after the goods誥rrival at the destination.

(2) 发货前，制造厂应对货物的质量、规格、性能和数量/重量作精密全面的检验，出具检验证明书，并说明检验的技术数据和结论。货到目的港后，买方将申请中国商品检验局(以下简称商检局)对货物的规格和数量/重量进行检验，如发现货物残损或规格、数量与合同规定不符，除保险公司或轮船公司的责任外，买方得在货物到达目的港后__日内凭商检局出具的检验证书向卖方索赔或拒收该货。在保证期内，如货物由于设计或制造上的缺陷而发生损坏或品质和性能与合同规定不符时，买方将委托中国商检局进行检验。

The manufacturers shall, before delivery, make a precise and comprehensive inspection of the goods with regard to its quality, specifications, performance and quantity/weight, and issue inspection certificates certifying the technical data and conclusion of the inspection. After arrival of the goods at the port of destination, the Buyer shall apply to China Commodity Inspection Bureau (hereinafter referred to as CCIB) for a further inspection as to the specifications and quantity/weight of the goods. If damages of the goods are found, or the specifications and/or quantity are not in conformity with the stipulations in this Contract, except when the responsibilities lies with Insurance Company or Shipping Company, the Buyer shall, within _____ days after arrival of the goods at the port of destination, claim against the Seller, or reject the goods according to the inspection certificate issued by CCIB. In case of damage of the goods incurred due to the design or manufacture defects and/or in case the quality and performance are not in conformity with the Contract, the Buyer shall, during the guarantee period, request CCIB to make a survey.

19. 索赔(Claim)：

买方凭其委托的检验机构出具的检验证明书向卖方提出索赔(包括换货)，由此引起的全部费用应由卖方负担。若卖方收到上述索赔后______天未予答复，则认为卖方已接受买方索赔。

The buyer shall make a claim against the Seller (including replacement of the goods) by the further inspection certificate and all the expenses incurred therefrom shall be borne by the Seller. The claims mentioned above shall be regarded as being accepted if the Seller fail to reply within ______days after the Seller received the Buyers claim.

20. 迟交货与罚款(Late delivery and Penalty):

除合同第21条不可抗力原因外，如卖方不能按合同规定的时间交货，买方应同意在卖方支付罚款的条件下延期交货。罚款可由议付银行在议付货款时扣除，罚款率按每__天收__%，不足__天时以__天计算。但罚款不得超过迟交货物总价的____%。如卖方延期交货超过合同规定__天时，买方有权撤销合同，此时，卖方仍应不迟延地按上述规定向买方支付罚款。

买方有权对因此遭受的其它损失向卖方提出索赔。

Should the Seller fail to make delivery on time as stipulated in the Contract, with the exception of Force Majeure causes specified in Clause 21 of this Contract, the Buyer shall agree to postpone the delivery on the condition that the Seller agree to pay a penalty which shall be deducted by the paying bank from the payment under negotiation. The rate of penalty is charged at______% for every ______ days, odd days less than _____days should be counted as ______ days. But the penalty, however, shall not exceed_______% of the total value of the goods involved in the delayed delivery. In case the Seller fail to make delivery ______ days later than the time of shipment stipulated in the Contract, the Buyer shall have the right to cancel the Contract and the Seller, in spite of the cancellation, shall nevertheless pay the aforesaid penalty to the Buyer without delay.

The buyer shall have the right to lodge a claim against the Seller for the losses sustained if any.

21. 不可抗力(Force Majeure)：

凡在制造或装船运输过程中，因不可抗力致使卖方不能或推迟交货时，卖方不负责任。在发生上述情况时，卖方应立即通知买方，并在__天内，给买方特快专递一份由当地民间商会签发的事故证明书。在此情况下，卖方仍有责任采取一切必要措施加快交货。如事故延续__天以上，买方有权撤销合同。

The Seller shall not be responsible for the delay of shipment or non-delivery of the goods due to Force Majeure, which might occur during the process of manufacturing or in the course of loading or transit. The Seller shall advise the Buyer immediately of the occurrence mentioned above and within_____ days thereafter the Seller shall send a notice by courier to the Buyer for their acceptance of a certificate of the accident issued by the local chamber of commerce under whose jurisdiction the accident occurs as evidence thereof. Under such circumstances the Seller, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. In case the accident lasts for more than _____ days the Buyer shall have the right to cancel the Contract.

22. 争议的解决 (Arbitration):

凡因本合同引起的或与本合同有关的任何争议应协商解决。若协商不成，应提交中国国际经济贸易仲裁委员会深圳分会，按照申请仲裁时该会现行有效的仲裁规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。

Any dispute arising from or in connection with the Contract shall be settled through friendly negotiation. In case no settlement is reached, the dispute shall be submitted to China International Economic and Trade Arbitration Commission (CIETAC),Shenzhen Commission for arbitration in accordance with its rules in effect at the time of applying for arbitration. The arbitral award is final and binding upon both parties.

23. 通知(Notices):

所有通知用____文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后__日内书面通知另一方。

All notice shall be written in _____ and served to both parties by fax/courier according to the following addresses. If any changes of the addresses occur, one party shall inform the other party of the change of address within ____days after the change.

24. 本合同使用的FOB、CFR、CIF术语系根据国际商会《2019年国际贸易 术语解释通则》。

The terms FOB、CFR、CIF in the Contract are based on INCOTERMS 2019 of the International Chamber of Commerce.

25. 附加条款 (Additional clause)：

本合同上述条款与本附加条款抵触时，以本附加条款为准。

Conflicts between Contract clause hereabove and this additional clause, if any, it is subject to this additional clause.

26. 本合同用中英文两种文字写成，两种文字具有同等效力。本合同共__ 份，自双方代表签字(盖章)之日起生效。

This Contract is executed in two counterparts each in Chinese and English, each of which shall deemed equally authentic. This Contract is in ______ copies, effective since being signed/sealed by both parties.

Representative of the Buyer

(Authorized signature):

卖方代表(签字)：

Representative of the Seller

短短的实习期已经结束，静下心来回想这次实习真是感受颇深。我们知道实习是大学教育中一个极为重要的实践性环节，通过实习，可以使我们在实践中接触与本专业相关的一些实际工作，培养和锻炼我们综合运用所学的基础理论、基本技能和专业知识，去独立分析和解决实际问题的能力，把理论和实践结合起来，提高我们的实际动手能力，为将来我们毕业后走上工作岗位打下一定的基础。通过这段时间的学习，从无知到认知，到深入了解，渐渐地我喜欢上这个专业，让我深刻的体会到学习的过程是最美的，在整个实习过程中，我每天都有很多的新的体会，新的想法。

回顾我的实习生活，感触是很深的，收获也是丰硕的。这次的实习，主要是与非洲、中东、印度等地方的外国商人做生意，他们在我公司下订单，我们再把订单下到厂里，从中赚取差额。这次的实习经历我对外贸这个专业有了更加理性的认识和更深刻的体会。

通过这次的实习，我由第一天的拘谨，对什么事情都充满着好奇，转而逐渐适应了这样的生活，做事情按部就班，循序渐进。这次的实习，让我懂得了许多，知道了许多，大学文凭其实只是一块敲门砖。进入工作单位后，大家都是从头开始，凡事都要自己去摸索，没有人会手把手教你。所以，我们有必要培养主动学习能力和创新能力，必须努力提高自身的综合素质，适应时代的需要。虽说大学文凭只是一块敲门砖，但是个人的综合素质却仍是你就业时的重要筹码。首先是学习成绩，用人单位认为成绩的好坏从一定程度上说明了你学习能力的强弱，所以，学习成绩是他们非常看重的一点。因此，我们首先要学好自己的专业知识。其次，他们看重的就是就是我们的社会实践能力。这一点就要看我们平时的实际动手及操作能力。

经过这段时间的实习，我主要有以下几点感想：

第一，要有坚持不懈的精神

作为在校生，我们不管到哪家公司，一开始都不会立刻给工作我们做，一般都是先让我们熟悉公司的工作环境，时间短的要几天，时间长的要几周，或更长的时间，在这段时间里很多人会觉得很无聊，没事可做，便会产生离开的念头，在这个时候我们一定要坚持，不能轻易放弃。

第二，要勤劳，任劳任怨

我们到公司去实习，由于我们不是正式职员，所以公司多数是把我们当学生看待。公司在这个期间一般不会给我们什么重要的工作去做，可又不想让我们闲着，因此，他们会交给我们一些比较简单的工作。与此同时，我们应该自己主动找一些事情来做，从小事做起，刚开始也只有这样。

第三，要虚心学习，不耻下问

在工作过程中，我们肯定会碰到很多的问题，有很多是我们所不懂的，不懂的东西我们就要虚心向同事请教，当别人教我们知识的时候，我们也应该虚心地接受。同时，我们也不要怕犯错。每一个人都有犯错的时候，工作中第一次做错了不要紧，重要的是知错能改。

第四，要确立明确的目标，并端正自己的态度

平时，我们不管做什么事，都要明确自己的目标，就像我们到公司工作以后，要知道自己能否胜任这份工作，关键是看你自己对待工作的态度，态度对了，即使自己以前没学过的知识也可以在工作中逐渐的掌握。因此，要树立正确的目标，在实现目标的过程中一定要多看别人怎样做，多听别人怎样说，多想自己应该怎样做，然后自己亲自动手去多做。只有这样我们才能把事情做好。

通过本次的实习，我还发现自己以前学习中所出现的一些薄弱环节，并为今后的学习指明了方向，同时也会为将来的工作打下一个良好的基础。，但这次的实习为我们提供了一个很好的锻炼机会，使我们及早了解一些相关知识以便以后运用到以后的业务中去。通过这次的实习，我熟练地掌握英语口语，能够自如地与外国人交流，同时让我懂得英语真的很重要，我知道只有通过刻苦的学习，加强对业务知识的熟练掌握程度，在现实的工作中才会得心应手，应对自如。

总体来说，这次实习不仅仅是锻炼了我在贸易操作方面的一些技能，同时，经过这次实习，我还从中学到了很多课本上所没有提及的知识，还有就是在就业心态上我也有很大的改变，以前我总想找一份适合自己爱好，并且专业对口的工作。可现在我们都知道找工作很难，要专业对口更难，很多东西我们初到社会才接触、才学习。所以我现在要建立起先就业再择业的就业观。应尽快学会在社会上独立，敢于参加与社会竞争，敢于承受社会压力，使自己能够在社会上快速成长。总的来说，作为一个快要毕业的大学生，无论是在今后的工作或是生活中，实习都将成为我人生中一笔重要的资本。

还有半年就要告别大学生活了，即将踏入社会。我们知道随着中国在国际贸易中地位的不断上升，以及在我国加入世界贸易组织和全球化进一步发展的新形势下，对于我们国贸专业的学生们来说，或对于作为将来从事国际贸易方面业务的我们来说，去外贸公司实习对我们来说非常重要。这次我有了一个很好的机会就是去外贸公司进行实习。

短短的实习期已经结束，静下心来回想这次实习真是感受颇深。我们知道实习是大学教育中一个极为重要的实践性环节，通过实习，可以使我们在实践中接触与本专业相关的一些实际工作，培养和锻炼我们综合运用所学的基础理论、基本技能和专业知识，去独立分析和解决实际问题的能力，把理论和实践结合起来，提高我们的实际动手能力，为将来我们毕业后走上工作岗位打下一定的基础。通过这段时间的学习，从无知到认知，到深入了解，渐渐地我喜欢上这个专业，让我深刻的体会到学习的过程是最美的，在整个实习过程中，我每天都有很多的新的体会，新的想法。

回顾我的实习生活，感触是很深的，收获也是丰硕的。这次的实习，主要是与非洲、中东、印度等地方的外国商人做生意，他们在我公司下订单，我们再把订单下到厂里，从中赚取差额。这次的实习经历我对外贸这个专业有了更加理性的认识和更深刻的体会。

通过这次的实习，我由第一天的拘谨，对什么事情都充满着好奇，转而逐渐适应了这样的生活，做事情按部就班，循序渐进。这次的实习，让我懂得了许多，知道了许多，大学文凭其实只是一块敲门砖。进入工作单位后，大家都是从头开始，凡事都要自己去摸索，没有人会手把手教你。所以，我们有必要培养主动学习能力和创新能力，必须努力提高自身的综合素质，适应时代的需要。虽说大学文凭只是一块敲门砖，但是个人的综合素质却仍是你就业时的重要筹码。首先是学习成绩，用人单位认为成绩的好坏从一定程度上说明了你学习能力的强弱，所以，学习成绩是他们非常看重的一点。因此，我们首先要学好自己的专业知识。其次，他们看重的就是就是我们的社会实践能力。这一点就要看我们平时的实际动手及操作能力。

经过这段时间的实习，我主要有以下几点感想：

第一，要有坚持不懈的精神

作为在校生，我们不管到哪家公司，一开始都不会立刻给工作我们做，一般都是先让我们熟悉公司的工作环境，时间短的要几天，时间长的要几周，或更长的时间，在这段时间里很多人会觉得很无聊，没事可做，便会产生离开的念头，在这个时候我们一定要坚持，不能轻易放弃。

第二，要勤劳，任劳任怨

我们到公司去实习，由于我们不是正式职员，所以公司多数是把我们当学生看待。公司在这个期间一般不会给我们什么重要的工作去做，可又不想让我们闲着，因此，他们会交给我们一些比较简单的工作。与此同时，我们应该自己主动找一些事情来做，从小事做起，刚开始也只有这样。

第三，要虚心学习，不耻下问

在工作过程中，我们肯定会碰到很多的问题，有很多是我们所不懂的，不懂的东西我们就要虚心向同事请教，当别人教我们知识的时候，我们也应该虚心地接受。同时，我们也不要怕犯错。每一个人都有犯错的时候，工作中第一次做错了不要紧，重要的是知错能改。

第四，要确立明确的目标，并端正自己的态度

平时，我们不管做什么事，都要明确自己的目标，就像我们到公司工作以后，要知道自己能否胜任这份工作，关键是看你自己对待工作的态度，态度对了，即使自己以前没学过的知识也可以在工作中逐渐的掌握。因此，要树立正确的目标，在实现目标的过程中一定要多看别人怎样做，多听别人怎样说，多想自己应该怎样做，然后自己亲自动手去多做。只有这样我们才能把事情做好。

通过本次的实习，我还发现自己以前学习中所出现的一些薄弱环节，并为今后的学习指明了方向，同时也会为将来的工作打下一个良好的基础。但这次的实习为我们提供了一个很好的锻炼机会，使我们及早了解一些相关知识以便以后运用到以后的业务中去。通过这次的实习，我熟练地掌握英语口语，能够自如地与外国人交流，同时让我懂得英语真的很重要，我知道只有通过刻苦的学习，加强对业务知识的熟练掌握程度，在现实的工作中才会得心应手，应对自如。

总体来说，这次实习不仅仅是锻炼了我在贸易操作方面的一些技能，同时，经过这次实习，我还从中学到了很多课本上所没有提及的知识，还有就是在就业心态上我也有很大的改变，以前我总想找一份适合自己爱好，并且专业对口的工作。可现在我们都知道找工作很难，要专业对口更难，很多东西我们初到社会才接触、才学习。所以我现在要建立起先就业再择业的就业观。应尽快学会在社会上独立，敢于参加与社会竞争，敢于承受社会压力，使自己能够在社会上快速成长。总的来说，作为一个快要毕业的大学生，无论是在今后的工作或是生活中，实习都将成为我人生中一笔重要的资本。

进口合同(样式一)

5.9 如卖方在受载船只预计抵达日期已将货物备妥而买方船只不能在预计抵达日期后三十天内抵达交货港口，这三十天内的有关仓储费、保险费等由卖方负担，但第三十一天起以后发生的仓储费、保险费，按卖方提供的原始凭证，由买方核实支付。但卖方仍有责任根据买方通知，在受载船只抵达交货港口后，由卖方负责交货，在此情况下，卖方不支付迟交罚款。

5.10 卖方应在每批货物装船后四十八小时内，将提单日期和号码、船名、“设备”名称、总价、总重、总体积、总件数和合同号以电传通知买方。如遇有第5.5条的大件货物及危险品，应逐件列明毛重和尺寸（长、宽、高）、品名、金额。买方因卖方未及时通知而未投保所造成的损失将由卖方负担。

5.11 在将货物装到船上后，卖方应于装船后将每批货物的整套交货文件（即、提单、商业发票装箱单和质量证明书各一份）随船在目的港提交给中国外贸运输公司。

同时航寄买方上述单据副本各两份和检验记录、试验报告以及有关装配安装图纸各三份。

5.12 技术资料的内容和交付计划见本合同附件三。

5.13 卖方在技术资料发出前一周将大约件数、大约毛重、合同号和资料预计抵达北京和/或＿＿的日期用电传通知买方。在资料寄出后二十四小时内卖方需将发出日期、航次、空运单号、重量及资料件数、合同号以电传的方式通知买方。

5.14 “技术资料”到达目的机场的日期为实际交付日期。

5.15 卖方提供的“技术资料”应在北京和/或＿＿机场交付，上述资料的风险，在卖方在北京/或＿＿机场交付后即由卖方转移给买方，如果技术资料短少、丢失或损坏时，卖方应在收到买方通知二十一天内在北京和/或＿＿机场补充提供丢失或损坏部分，不再收取任何费用。

5.16 在每批“技术批准”交货后的两个工作日内，卖应将下述文件航寄给买方：

a.空运提单一式二份（通知目的机场的中国对外贸易运输公司，并注明合同号）

b.技术文件的详细清单一式二份。

第六章 包装与标记

6.1 卖方交付的所有货物应具有适合远洋的内陆运输和多次搬运、装卸的新的坚固木箱包装。并应根据货物的特点和需要，加上防潮、防雨、防锈、防震、防腐蚀的保护措施，以保证货物安全无损地运抵安装地点。

6.2 卖方对包装箱内和捆内的各散装部件均应系加标签，注明合同号、主机名称、部件名称以及该部件在装配图中的位号、零件号。备件和工具除注明上述内容外，尚需注明“备件”或“工具”字样。

6.3 卖方应在每件包装箱的邻接四个侧面上，用不褪色的油漆以明显易见的英文字样印刷以下标记：

（1）合同号；

（2）唛头标记；

（3）目的港；

（4）收货人；

（5）设备名称及项号；

（6）箱号/件号；

（7）毛重/净重（公斤）；

（8）尺码（长×宽×高，以毫米表示）。

凡重量为二公吨或超过二公吨的货物，应在包装箱的四个侧面以英文及国际贸易运输常用的标记、图案标明重量及挂绳和重心位置，以便装卸搬运。根据货物的特点和装卸、运输上的不同要求，在包装箱上应以英文明显地印刷“轻放”、“勿倒置”、“防雨”等字样以及相应的国际贸易通用的标记图案。

共17页，当前第8页1234567891011121314151617

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

学生的假期结束了，新的一学期又来到了，伴随着开学季，中央电视台播出的《开学第一课》也随之而来，《开学第一课》是中央电视总台每年都会在9月1日播出的节目，受众人群是全国的中小学生，而今年的主题是“理想照亮未来”。

开学第一课开播啦!通过“云课堂”方式和各地中小学生共上一堂课，生动讲好中国共产党为人民谋幸福、为民族谋复兴、为世界谋大同的故事。今年是党的一百岁生日，《开学第一课》第一篇章以“理想是火，点燃革命热血”为主题，在中华民族五千年的发展历程中，爱国这两个字根深蒂固的刻在我们每个人的心中，每位学生都需要增强自己爱国的情感和振兴祖国的责任感，为未来树立好自己的理想，我们作为新世纪的青少年，理想是我们一生的奋斗目标，理想是照亮我们前方道路的指明灯，俗话说，少年兴则国兴，少年强则国强，有了理想才能为祖国的建设发展献出一份贡献。

在观看了《开学第一课》节目之后，我明白了在如今的和平年代里，爱国不一定需要你爱国捐躯，爱国不一定要我们喊出来，爱国还有很多种方式，作为一名学生，努力读书，为自己的理想点亮未来，为祖国以后的发展而做准备就是爱国。

____年x月x日至15日两个星期间，我在____经济贸易有限公司销售部业务员岗位实习，直接或间接地销售、宣传法国埃尔夫润滑油。这是次正式与社会接轨踏上工作岗位，开始与以往完全不一样的生活。每天在规定的时间上下班，上班期间要认真准时地完成自己的工作任务，不能草率敷衍了事。我们的肩上开始扛着民事责任，凡事得谨慎小心，否则随时可能要为一个小小的错误承担严重的后果付出巨大的代价，再也不是一句对不起和一纸道歉书所能解决的。

实习目的：国际贸易专业认识实习是教学内容的重要环节，通过专业认识实习可以使学生了解我国外贸改革、发展的状况，扩大知识面，增长见识并对涉外企业公司的业务内容、性质和流程有一个初步的感性认识，能初步将理论与实践相结合，培养发现问题、分析、解决问题的能力，从而在今后的专业课学习中做到有的放矢，提高学习的积极性、主动性和学习的兴趣，为将来更好地进行专业课学习、步入社打下一个坚实的基础。同时通过专业认识实习，为学生提供一个了解社会、接触社会及与人沟通的机会。让同学们学会在实践中学习，掌握手资料，从而增加学生的感性认识和亲身体会，为今后系统理论学习做好准备。

实习公司简介:____经济贸易有限公司是专营进口汽车零件、润滑油和汽车养护用品的专业公司.是美国蓝牌、法国埃尔夫润滑油、泰国保赐利汽车养护用品的特约经销商.公司成立十多年来，一直致力于汽车服务领域，凭借良好的信誉和优质的服务赢得了广大客户的信赖和赞誉.目前公司的业务网络已遍布河南省内外，拥有一支高素质专业化的服务队伍。

所属行业：贸易/零售/批发/代理公司性质：私营

实习内容和收获: 从学校到社会的大环境的转变，身边接触的人也完全换了角色，老师变成老板，同学变成同事，相处之道完全不同。在这巨大的转变中，我们可能彷徨，迷茫，无法马上适应新的环境。我们也许看不惯企业之间残酷的竞争，无法忍受同事之间漠不关心的眼神和言语。很多时候觉得自己没有受到领导重用，所干的只是一些无关重要的杂活，自己的提议或工作不能得到老板的肯定。做不出成绩时，会有来自各方面的压力，老板的眼色同事的嘲讽。而在学校，有同学老师的关心和支持，每日只是上上课，很轻松。常言道：工作一两年胜过十多年的读书。两星期的实习时间虽然不长，但是我从中学到了很多知识，关于做人，做事，做学问.

1、自控能力——“克服怯弱心里”

好的开头是成功的一半，俗话说:”万事开头难”，记得我和任建庭同学一块去找工作时，在__光大印染有限公司门外徘徊了很长时间，总是害怕遭到拒绝.在谈话期间由于我们准备不够充分，心理也有所紧张，所以在公司人员以种种借口拒绝我们的实习要求时，我们不能很好的应对，以至于我们次求职就遭到失败. 当时我们郁闷了许久，后来还是建庭说:”如果我们永远害怕尝试，我们将永远不能成功.”是的，我们不迈出尝试的脚步，就找不到成功的路途.于是我们稍作调整，又信心百倍的出发了，朝着我们的第二目标走去，也就是我们所实习的公司:____经济贸易有限公司.我们吸取次教训，把公司人员可能问的问题都想一下，所以当公司再次以我们的实习时间短，害怕泄露公司机密，害怕我们成为他们的绊脚石等等问题时，我俩都做出了很好的回答，开始是一职员接见我们，后来经理见我俩口才还不错，就接见了我们，并且答应我们在该公司实习，并要求第二天上班.我和建庭都高兴极了，毕竟这是靠我们实力找到的工作，回校的一路上我都在品味建庭的话，是的，万事开头难，因此我们更应该把开头做好.第二天我们培训了以后，公司相关人员要求我们到附近的汽车修理公司试一下.我们走到家汽车修理公司，我们再次徘徊在其门口，看到那些员工忙进忙出，我们竟一时不知该如何走进这家公司，……后来还是建庭的那句话激发了我们，我们昂首挺胸的走进去，和他们的员工谈话询问经理，又和经理介绍我们公司的产品，虽然当时我们的内心里还是比较的虚，虽然我们没有谈成这笔生意，但我们尝试过，努力过，知道里面的酸甜苦辣，我们就相当的自豪，因为我们克服了自己的懦弱心理.虽然在那些公司经理看来，我们还只是一些只懂得润滑油作用的毛头小子，但我们依然坚持着，乐不知 疲的做着.

2、自学能力—— “活到老，学到老”

“在大学里学的不是知识，而是一种叫做自学的能力”。参加工作后才能深刻体会这句话的含义。课本上学的理论知识用到的很少很少。我担任的是业务员一职，几乎没用上自己所学的专业知识。在工作的天里，公司总经理把我们介绍给销售部李经理，而经验丰富的李经理让我们用一天的时间来了解掌握关于法国埃尔夫润滑油方面的知识，对埃尔夫产品做了些简单的了解。埃尔夫是世界上最专业的润滑油供应

商之一，是巴黎—达喀尔拉力赛润滑油主赞助商，参与支持世界一级方程式大奖赛三十多年历史，隶属于全球第四大石油集团的润滑油品牌，财富全球500强20__年排名第10位等等。也正是通过这次了解，我才知道润滑油的作用不仅仅是润滑作用，还有其他作用，比如：它可以形成一层油膜而减少摩擦；具有一定的黏度可以具有封闭的作用；润滑油还具有一定的弱碱性中和酸性从而达到抗腐蚀的作用；此外，还有保洁，散热的作用。一直以来我总以为水是用来散热的，才发现我错了，水只是辅助散热，真正散热的还是润滑油，它可以散掉热量的60%--70%。李经理说∶“做业务这项工作，几乎用不上自己所学的专业知识，但做业务也是门大学问，我们必须在工作中勤于动手慢慢琢磨，不断学习不断积累。遇到不懂的地方，自己先想方设法解决，实在不行可以虚心请教他人，而没有自学能力的人迟早要被企业和社会所淘汰。”下午，我们两人在张老师的介绍下，通过图片与实物相结合的方法对其产品有了更加直观的认识，并且懂得了一些关于此类产品的专业知识、数字和字母符号。然后学习掌握了它的优点和缺点，以及与同类进口产品的对比，知彼知己，百战不殆嘛！同时我们也知道了许多国际名牌产品，例如：美孚、壳牌、嘉实多、BP等。 的确，在这次实践中，我们学到了许多在学校课本上学不到的东西，一些说话的技巧，一些场合的礼仪，一些工作的经验，都让我受益匪浅，这是我一笔宝贵的财富，我会一直珍惜学习的.在我们实习的天结束，经理给我们要实习总结，而次当业务员的我们根本就不知道还要写工作总结.第二天结束我在学校宿舍写了份总结，发现写总结的确有好处，

它不仅记载了我们去过的公司情况，也有我们吸取教训的地方.第三天交给经理过目，立即得到了经理的好评.记得在实习最后一天，当我们握手说合作愉快的时候，经理请求我把工作总结留给他，并说这是让他的员工学习用的，可是我写实习报告有用，只好对他说我用过后再交给他了.经理对我们说:”一个良好的习惯，足以让你受益一生，这种日记式的总结很有好处，如果你能坚持10年，那将是一笔不可估量的财富，你的人生也是成功的.”

3、工作很辛苦——“勤能补拙是良训，一份辛苦一份才”

由于现在还住校，所以每天6点不到就得起床去挤公交车，就算再差的天气，只要不是周末，都得去上班，有时候公司业务繁忙，那留给个人支配的时间更少。我们必须克制自己，不能随心所欲地不想上班就不来，而在学校可以睡睡懒觉，实在不想上课的时候可以逃课，自由许多。记得总经理答应我们实习时对我们说:’不管你们是实习还是其他，我都会象真正的我公司员工一样对待，我也希望你们遵守我们公司的规章制度，我们公司的规章制度是十分严格的.”

每日重复单调繁琐的工作，时间久了容易厌倦。象我们就是每天就是每天和那些公司的业务客户们介绍产品，并且路途一般很远。显得枯燥乏味。但是工作简单也不能马虎，你一个小小的错误可能会给公司带来巨大的麻烦或损失，还是得认真完成。我们每天得打电话，口干舌燥先不说，还要受气，忍受一些客户不友好的语气有些甚至说要投诉。如果哪家公司有意向的还得再次奔波去商谈。而事实上所有的业务并不是一次就能交易成功的，记得经理对我们说过，他在新郑市一

合同号 ______________________________

甲方： ______________________________ 公司(以下简称供方)，由 ____________________ 代表。

乙方： ______________________________ 公司(以下简称购方)，由 ______________________________ 代表。

第一条 合同标的供方同意出售，购方同意购买 ____________________ 。(详见本合同附件1，该附件为本合同不可分割的一部分)。

第二条 技术资料供方应向购方提供设备使用及维修技术资料一份。

第三条 供货条件-包装和标记供方应在设备全额信用证开立之后的 __________ 个月内用密封集装箱或其它包皮包装从 ____________________ 发运设备。

供方有权从任何对其方便的港口发运设备。

供方应把设备运至商定的原苏联东海岸 ____________________ 港。

自设备从船航运抵独联体远东港口时起灭失和(或)损坏的风险由供方转移到购方。

供方承担设备运输的一切费用及运抵港口前的保险费。

设备从独联体港口继续运到安装地的一切费用由购方承担。

发货前 __________ 天内供方应向购方通知发运情况，明确交通工具的种类和名称、计划发运日期及其它有关信息。

购方应支付履行海关手续的所有费用和一切与设备运入独联体境内有关的开支。

设备和技术资料用密封集装箱或其它包皮装运并附具包装清单，标记使用英语刷写。

发货单证包：

1)发货帐单(三份)

2)海运提单

3)装箱单

4)保险单

第四条 设备质量按本合同所供设备的质量应符合生产厂家的技术条件。如生产厂家有保证书，应用保证书加以确认。

第五条 合同价格和支付条件所供设备的总额为 __________ 美元(CIF价)。购方应在合同签定后的 __________ 天内开立以供方为受益人的不可撤销的保兑信用证。该信用证在开立时起的 __________ 天内有效。

开证行应为独联体外经银行或日本、南韩、西欧、美国、加拿大的某家银行。

一切与在开证行开立信用证有关的费用由购方承担，而一切与议付行收取信用证有关的费用由供方承担。

支付在向议付行提交下列单据后进行：

1)发货帐单(3份)

2)海运提单

3)装箱单

4)保险单

第六条 保证供方保证所供设备在投入使用日起的 __________ 个月内，但不超过发货日起的 __________ 月内正常工作。

第七条 不可抗力在发生不可抗力情况致使合同一方不能全部或部分履行本合同的义务时，按此种不可抗力情况存在的时间推迟履行合同义务。

不可抗力情况是指双方不能预见或预测的由于非常事件而出现的情况，即：影响履行所承担义务的火灾、风暴、地震和其它自然现象，以及战争、任何性质的军事行动，各国政府的封锁与制裁等。

因不可抗力情况而不能履行义务的一方，应在不可抗力情况发生和停止的20天内书面通知另一方关于其发生和停止的情况。收信人所在国邮局在收到通知函日加盖的日期作为得悉该信息的日期。

协约双方国商会出具的证明书将成为证明上述情况发生及延续时间的必要证据。

如有些情况延续3个多月，每一方都有权拒绝继续履行本合同义务，同时任何一方都无权要求对方赔偿可能发生的损失。

第八条 仲裁所有可能由本合同而产生的纠纷或分歧均应由合同双方友好解决。

如果无法解决纠纷，则该纠纷应提交莫斯科市原苏联工商会下设外贸仲裁委员会按其业务规章审理(提交一般法院审理者除外)，该委员会的决定对于双方为终审，必须执行。

第九条 通知一切通知等双方均应按本合同条件以书面形式进行。

第十条 语言本合同用俄语书就。供方提供英文的全部技术资料和供货单证。

第十一条 其它条件自本合同签署之日起，所有在此以前的有关谈判和往来信函均告失效。

对本合同的任何修改和补充只有在以书面形式形成并经双方有关全权代表签字后方能生效。

任何一方都无权在未征得对方书面同意之前将自己对合同的权利和义务转让给第三者。

本合同于 __________ 年 __________ 在苏联 __________ 签署，一式两份，两份具有同等效力。

供方 _______________________ 购方 _______________________

外贸出口合同样本

第五条 费用

5.1 承诺费：借款人每年支付给银行贷款总额0.5%的承诺费，从本合同生效之日起(包括该日在内)，到付款日和终止日中较早之日(但不包括该日在内)为止，从其后第3个月的该日起开始按季支付至付款日与终止日中较早之日。

5.2 管理费：借款人应支付给管理行相等于贷款总额1%的管理费，在当日支付。

5.3 代理费：借款人应支付给代理行代理费。(1)在付款日和终止日两者之中较早之日后的60天内，支付____ 美元；(2)借款人在提款的周年日应付或应偿还的任何金额未偿还时，则按提款日一周年支付____ 美元。

第六条 税款

6.1 不得抵销、反索或扣交：根据本合同，借款人所应作出的每次付款或开出的票据，均不得抵销或反索，并不得扣交由任何地点或其任何政治分支机构、或税务当局征收的任何性质的、目前或将来的税款，但是，如果法律规定从上述支付额中扣交税款，则借款人应为银行或代理行扣交，并按时支付给主管当局。其后付给各行和代理行另外一笔金额，以保证该行或代理行除去税收的实际所得净值与对该笔支付没有扣交税额时的所得相等。所有上述税款均应由划款人在支付罚金或付息之日前支付。但是，如果上述罚金或利息到期应付，借款人应向政府主管当局立即支付。如果代理行或任何银行应支付上述税款、罚金或利息的任何金额，则借款人一经要求，即应用美元如数补偿代理行或银行。如果借款人应交任何税款，则应在交税后30天之内，将上述的官方税收收据或证明副本交付代理行。

6.2 印花税：借款人应支付与本合同或票据有关的任何管辖地征收的注册税或转让税、印花税或类似的税款以及应付的罚金、利息。如果代理行或任何银行支付了任何上述税款、罚金和利息，则借款人一经要求即应如数补偿代理行或该行。

第七条 付款；计算

7.1 款项的支付

(1)借款人按照本合同的应付款项或票据，应在上述应付之日________时间上午11时为止，用美元，用________银行间清算系统清算的资金，或按照代理行其时决定的，为在________市用国际银行交易惯用的以美元结算的其他资金，支付给代理行在________银行开立的账号为第________号的帐户，或代理行向借款人指定的其他帐户。

(2)凡根据合同或根据票据写明到期应付款项，或任何利息的终止日在某规定月份的特定日，如果没有相应的日期，则应在该月最后一个银行营业日付款或终止。

7.2 计算____根据本合同应付的利息与承诺费，应按1年360日和实际过去的天数计算。

第八条 先决条件

8.1 付款日前应满足的条件：各行贷款的义务须根据下列条件而定：即代理行应在不迟于付款日前5个银行工作日的________时间下午________时收到经签署的副本以及经确认的副本若干份，或另外经确认的副本若干份，足以使所有的银行都持有下列文件，每份注明交送日期，其形式和内容均应为代理行所满意：

(1)借款人证明书，以及其中所规定的附件，其格式基本按照附录4的规定格式。

(2)借款人律师的意见书，基本上按照附录5所规定的格式。

(3)当地法律事务所、代理行和银行特聘的当地律师出具的意见书，基本上按照附录6规定的格式。

(4)代理行和银行特聘的________律师出具的意见书，基本上按照附录7规定的格式。

共16页，当前第14页12345678910111213141516

甲方：______

乙方：______

为有利于双方发展，充分利用双方对外融资的有利因素，加强企业间经济合作，提高经济效益和社会效益，甲、乙双方就融资担保问题经过充分酝酿，共同达成如下协议：

一、甲、乙双方本着平等互利、真诚合作、共同发展的原则，在融资领域内进行友好合作。

二、甲、乙双方共同确认：双方承担总额度为伍仟万元的贷款责任担保，并同意按照《民法典》履行各自责任。

三、在乙方需要担保时，甲方为乙方提供的担保额度总共为万元，不管是乙方中的一家公司还是二家公司;在甲方需要担保时，甲方可以选择乙方中的一家公司，为甲方提供相同额度的贷款担保。

四、甲、乙双方在履行互为担保时，最长担保期限不超过三年，贷款必须专款专用，担保方有权对被担保方的贷款使用情况进行监督，期满还清贷款本息时，被担保方应主动向担保方提供还贷凭证，以便对方及时了解。

五、任何一方为对方担保时，应如实提供各自财务报表、营业执照、信用证明复印件以及有关企业概况等资料。

六、担保方的继受人将受本协议的约束，并继续承担担保责任。未得到对方事先书面同意，担保方不会转让其担保义务。

七、担保方代被担保方清偿债务后，有权向被担保方追偿。

八、在本合同有效期内，甲、乙任何一方都不得擅自变更或解除本合同，确需变更本合同条款时，应经对方协商同意，达成书面补充协议。

九、违约责任

甲、乙双方都应遵守本协议的约定，任何一方违约，违约方应向守约方支付违约金________万元，并赔偿守约方的一切经济损失。

十、争议的解决方式

在履行本合同中发生的争议，由甲、乙双方协商或通过调解解决。协商或调解不成，任何一方都有权向原告所在地的人民法院起诉。

十一、协议未尽事宜，双方协商解决。

十二、本协议自签订之日起生效。

十三、本协议一式二份，双方各执一份，以兹共同遵守。

甲方：______集团股份有限公司

法定代表人：

乙方：__________实业投资有限公司

法定代表人：

______钢铁投资有限公司

法定代表人：

年月日

货物出口合同范本

签约地点：________________________________

日期：____________________________________

卖方 ：___________________________________

地址：____________________________________

电话：____________________________________

传真：____________________________________

电子邮箱 ：_______________________________

买方： ___________________________________

地址：____________________________________

电话：____________________________________

传真：____________________________________

电子邮箱 ：_______________________________

买卖双方经协商同意按下列条款成交：

1.货物名称、规格和质量 ：________________________________________

2.数量： ______________________________

3.单价及价格条款 ：______________________________

(除非另有规定，“FOB”、“CFR”和“ CIF”均应依照国际商会制定的《2019年国际贸易术语解释通则》(INCOTERMS 2019)办理。)

4.总价：______________________________

5.允许溢短装： ______%.

6.装运期限

收到可以转船及分批装运之信用证______天内装运。

7.付款条件

买方须于_______前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后_____天在中国到期，并必 须注明允许分批装运和转船。

买方未在规定的时间内开出信用证，卖方有权发出通知取消本合同，或接受 买方对本合同未执行的全部或部份，或对因此遭受的损失提出索赔。

8.包装：________________________________________

9.保险：

按发票金额的______%投保__________险，由________负责投保。

10.品质/数量异议

如买方提出索赔，凡属品质异议须于货到目的口岸之日起30天内提出，凡属 数量异议须于货到目的口岸之日起15天内提出，对所装货物所提任何异议于保险 公司、轮船公司、其他有关运输机构或邮递机构所负责者，卖方不负任何责任。

11.由于发生人力不可抗拒的原因，致使本合约不能履行，部分或全部商品 延误交货，卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不 能克服的客观情况。

12.仲裁

因凡本合同引起的或与本合同有关的任何争议，如果协商不能解决，应提 交中国国际经济贸易仲裁委员会深圳分会。按照申请仲裁时该会当时施行的仲裁 规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。

13.通知

所有通知用______文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后______日内书面通知另一方。

14.本合同为中英文两种文本，两种文本具有同等效力。本合同一式 _____ 份。自双方签字(盖章)之日起生效。

卖方签字：________________

买方签字：________________

外贸验货qc的年终总结范文

我在外贸验货这行也有十多个年头了，从最初的一线QC,到现在的外企品质经理，一路走来，感受颇多。又是一年年终了，对于QC验货，我有话要说----

QC的责任及重要性:

产品的质量及货期会直接影响客人对公司的信任度,所以我们每一个判断都会直接或间接影响公司利益的,由于现在的工厂体制、合作模式、工人质素等多方面的转变,QC的工作要求也随而转变,QC跟单相结合,除了监督质量外还要留意进度,两者是有冲突的,要适当着量,如遇到任何一方感到危机或无法解决时,要及早通知公司及有关人员,尽快寻求解决方法.

验货QC易犯的错误:

说谎、

1)我们的工作一般情况下都是独立自主的,正因为这样,我们很容易酿成一个缺点--说谎.成因一般是由于自身的懒散及遗忘导致工作任务的延误或没完整的完成,待公司追问时,由于一时紧张就会用说谎来掩饰自己的错误,为了完谎可能会说更多的谎话,可能会由一个小小的错误变成一个令公司损失的特大错误,这需要同事们多些监控和提点,更需要的是自身的自律.

动摇立场、

2)由于工作需要,我们有时会长时间接触同一个外贸供应商或工厂,为了更好地完成任务,我们会跟外贸或工厂的有关人员建立良好的关系(这是有必要的),但正因为这样,我们可能会动摇立场而作出错误的判断,所以我们要时刻警惕自己,坚定立场,公事上要以公司利益为出发点.

贪心、

3)产品出现问题是常见的,因为我们的产品种类比较多,常合作的工厂不多,甚至有的是一次性的.当产品出现问题时,有少数的工厂为了自己的利益会作出一些影响我们判断的行为,最常见的是吃喝玩乐及送礼,甚至有更可鄙的金钱收买,这是考验你们的人格,这是做人和做事都不可取的.

沟通方式、

4)我们的产品种类比较多,要对每一种产品的生产过程及特性都了解是无可能的,所以有时会受到工厂的质疑和瞒骗,我们需要在产品的生产过程中多学习、多询问,从低层做起,从低层问起,切勿自傲称高,要懂得利用亲和力去沟通,从中不但能学习到产品在生产过程中的利弊,或能探取工厂的瞒骗来作出相应的对策.在生产过程中,我们跟工厂的有关负责人员一般会处于对立的状态中,受到打压或不理采是在所难免的,这时需要用适当强硬的沟通方式去处理,以公司利益角度去表明态度和立场.在生产过程中,我们可以跟工厂的有关负责人员讨论或见意对产品有利的方案,切忌以命令的方式及口吻去沟通,避免产品出现问题时工厂借题发挥,推卸责任.

心态、

5)由于工作需要,我们有时会长时间出差在外,枯燥郁闷的生活加上工作压力可能会使你们有急燥、焦虑、无助等心态,甚至有些怨言,从而影响工作.要用不同的角度多方面去思考,多想想对自己有好处的结果来平行心态,同事的关心、上司的体恤和鼓励也是平行心态的良药.

过份认同避重就轻,

6)对产品生产过程中的细节及特性越了解越有利于工作,但过份自信地认同产品有其难度或工厂能力有,容易错把一些问题误判为理所当然,自认为再作任何努力,也无法达到要求.更错的是为了减轻自己的工作负担而避重就轻,此乃QC大忌.应将所有问题如实向跟单同事汇报,加以讨论,一方面向工厂施压,一方面作客观判断.

QC的工作细则

QC的工作就是根据公司提供的查货资料、样板及注意事项在产品的生产过程中监控质量及进度,当每次收到查货资料、样板及注意事项时,要立刻查阅有关资料,紧记重点,根据注意事项细察样板,以自身经验去仔细研究其可能存在的生产隐患,再与有关跟单同事作一些交流,互相提醒,互补漏洞,待产品完成后按照AQL的验货标准(或公司指引及客人要求进行验货,最后判断是否合格能否走货,如产品不合格或不能达到公司要求需要返工时,更需严谨细心监控、坚定立场,务必达到公司要求为止.概括工作任务分为四种.

1)中查:

公司会根据产品需要而作出中期查货的安排,这个过程不能丢意轻心,要细心谨慎,尽早发现问题,解决问题,避免产品达至无法挽救的地步.

2)尾查:

最终查货,作出是否合格能否走货的判断,根据公司提供的查货资料、样板及注意事项按步骤一项一项细心去做.点箱数对箱唛,量度纸箱尺寸是否相符,封箱方法是否正确;抽适当的箱数来进行查货,尽量抽取有间隔的箱号或有间隔的摆放,切忌假手于人;开箱抽点细数,查看包装方法是否正确及整洁,对包装资料,无论纸盒、胶袋、挂牌及所有辅件的材料与尺寸,就连每一个字符都要细心对照清楚,对某些特殊的产品,要用多方面的可能性去考虑、查判其包装方式会否直接或间接影响产品的变形及损坏等不良后果;按照AQL的验货标准进行抽样验货,验货时尽量避免太多的无关人员围观,小心偷龙转凤;用公司提供的验货报告清晰简明地填写产品问题,要求对方签名及盖章,把产品的问题拍照电邮给公司有关人员,最后传真及通知其验货情况.

3)QC跟单相结合:

当碰到产品数量比较大或感觉到工厂及产品有危机时,公司会安排我们监控产品的整个生产流程.待产品的有关材料批核后,我们就要开始追踪和核实,材料何时到厂,材料与批板有否差异.在材料准备完成前,厂方会作一个初步的生产计划,包括何时上线,如何排拉及外发情况等,材料准备完成后,我们即根据计划内容去监控计划的实行情况和判断其可行性,在这过程中数据是非常重要的,记录好每个工序的生产人数和日产量来评估生产进度,及早预测危机与厂方商讨解决方案,当有外发情况,要适当调配时间,如觉得时间或人手不足时,马上通知公司再作安排.当有成品开始装箱时,尽量要求工厂按流水号顺序来装箱,便于日后发现问题时查找根源及处理,如产品数量比较大时,尽可能分批尽早进行验货.

4)返工:

返工通常分为两种情况,

一是返工完成后再复查,这种情况首要观察产品是否真正返工过,有几个重点要留意.开封验证,看看包装箱及胶袋有没有开封过的迹象;数据评估,根据产品问题估计返工正常所需时间和所得比例,判断工厂是否只做门面功夫;"残骸"见证,如产品问题需要整体或局部换件时,返工前要求厂方保留其"残骸"作为见证.

二是现场监控,根据产品问题估计返工正常所需人力和时间,判断工厂是否安排恰当,返工过程中要强硬表明态度和立场之余,还应适当地作出质量指引,务求一次性按要求通过.

以上个人观点，欢迎同行前辈指正。

涉外贸易合同

于_________年_________月_________日，_________先生_________有限公司（以下简称售方），_________先生_________公司（以下简称购方），鉴于售方同意出售，购方同意购买_________（以下简称合同货物），其合同货物的质量、性能、数量经双方确认，并签署本合同，其条款如下：

1.合同货物：_________

2.数量：_________

3.原产地：_________

4.价格：_________f.o.b_________

5.装船：第一次装船应于接到信用证后30天至45天内予以办理。从第一次装船，递增至终了，应在12个月内完成。

6.优惠期限：为了履行合同，若最后一次装船时发生延迟，售方提出凭证，购方可向售方提供30天的优惠期限。

7.保险：由购方办理。

8.包装：用新牛皮纸袋装，每袋为_________公斤；或用木箱装，每箱为_________公斤。予以免费包装。

9. 付款条件：签订合同后5天（公历日）内购方通过开证行开出以售方为受益人，经确认的，全金额100％的，不可撤销的，可分割的，可转让的，允许分期装船的信用证，见票即付并出示下列证件：

（1）全套售方商业发票；

（2）全套清洁、不记名、背书提单；

（3）质量、重量检验证明。

10.装船通知：购方至少在装货船到达装货港的7天前，将装货船到达的时间用电传通知售方。

11.保证金：

（1）通知银行收到购方开具的不可撤销信用证时，售方必须开具信用证_________％金额的保证金。

（2）合同货物装船和交货后，保证金将原数退回给售方。若出于任何原因，本合同规定的第12条除外，发生无法交货（全部或部分）按数量比例将保证金作为违约予以没收支付给购方。

（3）若由于购方违约或购方不按照本合同第9条规定的时间内，（第12条规定除外）开具以售方为受益人的信用证，必须按保证金相同的金额付给售方。

（4）开具的信用证必须满足合同所规定的条款内容。信用证所列条件应准确、公道，售方并能予以承兑。通知银行收到信用证后，通知银行应给开证银行提供保证金。

12.不可抗力：售方或购方均不承担由于不可抗力的任何原因所造成的无法交货或违约，不可抗力的任何原因包括战争、封锁、冲突、叛乱、罢工、雇主停工、内乱、骚动、政府对进出口的限制、暴动、严重火灾或水灾或被人们所不能控制的自然因素。

交货或装船时间可能出现延迟，购方或售方应提出证明予以说明实情。

13.仲裁：因执行本合同所发生的一切争执和分歧，双方应通过友好协商方式解决。若经协商不能达成协议时，则提交仲裁解决。仲裁地点在_________由_________仲裁委员会仲裁，按其法规裁决。仲裁委员会的裁决是终局裁决，对双方均有约束力。仲裁费用应由败诉方承担。除进行仲裁的那部分外，在仲裁进行的同时，双方将继续执行合同的其余部分。

14.货币贬值：若美元货币发生法定贬值，售方保留按贬值比率对合同价格予以调整的核定权力。

15.有效期限：本合同签字后，在7天内购方不能开出以售方为受益人的信用证，本合同将自动失效。但购方仍然对第11条中第（2）、（3）项规定的内容负责，支付予以补偿。

本合同一式两份，经双方认真审阅并遵守其规定的全部条款，在见证人出席下经双方签字。

售方（盖章）：_________ 购方（盖章）：_________

代表（签字）：_________ 代表（签字）：_________

签订地点：_________ 签订地点：_________

_________年____月____日 _________年____月____日

今天真是一个很特别的日子，因为是--实习的第一天。虽然平时有点儿赖床，但今儿早上我可是早早地就起床了，热切地期待着去金陵纺织的实习。其实我这么高兴也是有缘由的，想我寒窗苦读了十多年，一直都是在摇头晃脑地念那些个理论，现在好不容易可以看看理论是如何付诸于实践的，我能不高兴吗?

在经过一番周转后，我终于来到了金陵纺织的车间。单从外观看呢!我真心觉得环境还是不错的，外墙都刷成粉红的，还挺温馨的。进到里面才发现，真是另外一番天地啊!

首先，就是那入耳的机器运作声，既吵又令人烦躁。但那些工人们却仿佛在平常的环境下，泰然自若地在做着自己的工作。一开始，我以为他们带着耳塞。后来仔细观察后才发现他们并没有戴耳塞，我想他们是已经习惯了这样的环境了吧!因为是纺织厂，所以女工为主，男工主要负责那些繁重的工作比如搬布等。我也是进去之后才知道，原来简简单单的一块布竟然需要那么多复杂的工序：有专门负责织布的，有专门熨布的，竟然还有专门负责质检的。原来再简单的东西都不是一蹴而就的，都是经过一系列的努力才能做成的。另外一个我注意到的就是在厂子进门的地方贴的一张紧急疏散图，就算再小心，也可能有意外，防患于未然的确应该在每个公司的考虑范围之内。

我一直以为办公得在一个令人舒畅的环境里，喝着令人心情舒畅的茶或者咖啡，这样才能事半功倍嘛!可是，这个厂改变了我的想法。我看见好多办公桌都直接设在了车间。一开始我很不理解：为什么办公要在那个很吵的车间呢?在一个安静的地方多好啊!可是后来厂里的一个人对于"如何提拔人才的"回答让我明白了一些。她说："一般提拔管理人才都是从内部选的。"好多人都问为什么。她回答说："如果他连最基本的操作和流程，产品是如何生产出来的都不知道，他怎么和别人谈生意呢!"对啊!如果不从基层做起，怎么会了解产品，又如何能管理呢!所以，以后找工作啊!千万不能眼高手低，只有放低姿态，虚心向别人学习，才能有所得。因为别人只会相信脚踏实地、有经验的人，是绝对不会相信那些夸夸奇谈、只会纸上谈兵、哗众取宠的人的。

总之，这次金陵纺织之行让我收获良多：其实有时候并不是生活欺骗了我们，只是我们早已习惯自己欺骗自己，所以才会一直走在失败的圆圈里，无法突出重围。

五个月的实习生活，看似很长，但是一眨眼的功夫就过去了。从刚开始的不谙世事，到此刻的得心应手。刚入公司，一切都显得那么陌生，做什么事情心里都没有底气，不能放开去做。有很多新的东西需要自己去学习和适应。此刻想想人在社会上就是需要适应不断的变化，适者生存，自己只有去适应社会，社会却不会去适应你。只有适应了这种高节奏的生活才能做出效率，作出成绩。作为公司肯定不会需要一个不会创造效益的人。经过几个月的磨练和适应，此刻的我对工作已经得心应手。每一天都会实现安排好当天的工作，把工作按照轻重缓急分配好，能把一天的工作完美的结束就是我这一天的成功了。完美的结束一天的工作只是我此刻的目标，以后我会给自己树立更高的目标，只有在不断追求完美的过程中，自己才能变得更加完美。

第一条、 合同双方

甲方：______________________乙方：______________________

根据《_________》等有关法律的规定，经双方协商，签订本合同，以资共同信守，严格履行。

第二条、 果品质量：按照国家规定的规格标准执行。

第三条、 运输方法和包装：由甲方负责以纸箱包装。

第四条、 运费和包装箱费承担：运输费由乙方承担，包装箱费由甲方负担。

第五条、 期限：要求水果在八成熟采摘，_____天内分_____批交货。

第六条、 验收方式：由乙方抽箱验收。

第七条、 结算方式：货款在每批水果交货当日通过银行托付。

第八条、 甲方的违约责任：

(1).甲方交货量不足，应向乙方偿付少交部分总价值_____%的违约金。

(2).甲方未按合同规定时间交货，每逾期_____天，应向乙方偿付迟交部分总价值_____%的违约金。

(3).甲方包装不符合合同规定，应当返工，所造成损失由甲方自负。

第九条、 乙方的违约责任：

(1)乙方必须按合同规定收货，否则，应向甲方偿付少收部分总价值20%的违约金。

(2).乙方没有按照国家规定的等级和价格标准，压级压价收购，除还足压价部分货款外，应向甲方偿付压价部分总价值____%的违约金。

(3).乙方在甲方交货后，应按时付款，每逾期一天，应向甲方偿付未付款部分总价值10%的违约金。

第十条、甲乙双方由于自然灾害和其他不可抗力，而确实不能全部或部分履行合同，可互相协商修订合同。

第十一条、本合同有效期限自______年____月____日至______年____月____日。

甲方代表人：____________________________ 乙方代表人：____________________________

_______________年__________月__________日_______________年__________月__________日

FDA进口预申报委托协议

fda进口预申报委托协议

fda进口预申报委托协议

甲方：______________________________

乙方：______________________________

鉴于甲方产品需（或准备）向美国出口，并希望乙方为其提供向fda进口预申报等相关服务。乙方作为美国fda进口预申报代理机构，愿意根据fda的要求及本合同的约定，帮助甲方完成其在fda的进口预申报等工作。为此，根据《中华人民共和国合同法》之规定，合同双方就fda进口预申报一事协商一致，签订本合同。

一、委托事项

甲方同意接受《办理fda进口预申报合同补充条款》（见附件a），委托乙方在美国办理fda进口预申报事宜。乙方接受甲方的上述委托，乙方在办理fda事务业务时，仅作为甲方的代理，注册的所有结（后）果由甲方享有和承担。

二、 甲方在申请fda进口预申报应提交以下资料

1.《fda进口预申报申请表》中文（或英文）一份；

2.fda新增加的要求需提交的其他文件、资料。

三、工作流程和办理注册期限：

1.工作流程：a.甲方提交“二”中所列资料；b.乙方审核合格后及时向fda申报；c.将结果通报甲方。

2.办理进口预申报期限：在甲方所提交的所有资料完整、签订《fda进口预申报委托代理协议》和付清款项后，自受理之日起____个工作日内完成，并立刻通知甲方。

四、服务费用

进口预申报的费用：采取年费、季费或按次付费方式：

1.年费方式：出口货物全年发运申报包干服务费为_______美元。一年内负责通报______次，多于_____次的每多申报一次收费____美元。

2.季费方式：每季度（_______个月）申报包干服务费为_______美元。每季度内负责通报____次，多于____次的每多申报一次收费_______美元。

3.按次付费方式：每次委托申报费用为_______美元。

上述预付金额如用人民币支付，按付款当日官方汇率换算。

五、费用支付

按年度付费方式：fda进口预申报年度代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户一次性支付上述代理费。

按季度付费方式：fda进 口预申报季度代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户一次性支付上述代理费。

按次付费方式：fda进口预申报每次代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户预付上述代理费。

如甲方迟纳服务费用，乙方将不对其申报文档进行处理，直到款到为止。由此造成的损失，由甲方自行负责。

六、合同组成部分

本合同附件a本合同的组成部分。本合同自签字之日起生效，有效期一年。正本一式二份，双方各执一份，具有同等法律效力。

甲方（公章）：_____________ 乙方（公章）：_____________

委托代理人（签章）：_______ 委托代理人（签章）：_______

联系电话：_________________ 联系电话：_______________

地址：_____________________ 地址：_____________________

邮编：_____________________ 邮编：_____________________

电子邮件：_________________ 电子邮件：_________________

公司帐号：_________________

开户行：___________________

_______年_______月_______日 _______年_______月_______日

附件a

办理fda进口预申报合同补充条款

一、合同缔约各方的责任和义务

1.甲方（委托方）责任和义务：

（1）及时提供fda注册所需文件、资料，在办理进口预申报过程中积极配合乙方工作，包括但不限于补充、补正相关文件、资料，以及执行fda对产品标识等方面的要求；

（2）按合同规定时间足额支付代理费用；

（3）保证提交的文件、资料真实、准确和完整，并不含有对任何第三方的侵权内容；

（4）甲方承诺因其所提交的文件、资料与实际不符或故意隐瞒真实情况，由甲方自行承担未正常注册的损失，给乙方带来损失的，应予赔偿；

（5）不以乙方的名义实施任何行为，或者从事任何其他有损乙方利益的行为；

（6）企业进口预申报完 成后，甲方提出再次申报，视为另次委托。

2.乙方（受托方）责任和义务：

（1）对甲方提供的文件、资料进行整理、审译，向fda办理申报；

（2）对甲方提交的文件、资料进行指导，在甲方要求和自费的前提下提供专项培训；

（3）接收、传递fda的有关文件和要求，并与甲方沟通；及时向甲方通报办理进度和结果；

（4）乙方承诺因乙方原因致使未办成的，全额退还代理费，退还限额不高于向甲方收取的费用。但不承担因此给甲方造成的损失；

（5）乙方获得仅限于合同约定范围内代理甲方fda进口预申报业务的权限，不得从事与代理业务无关的事项。

二、独立缔约方

本合同任何内容均不应被理解为在双方之间建立某种独立缔约方以外的关系，双方均为独立缔约方，并不对彼此之间的行动或疏忽承担赔偿义务。各方均不被视为是对方或对方其他下属公司的雇员或代理。各方均无权以任何方式，以对方或其下属公司的名义行事。作为独立缔约方，各方应缴纳各自的税赋并保证自己的必要的保险。

三、保密

任何一方不得将对方的非公开商业信息、资料（包括经营、生产、技术、管理等），以任何方式泄露给第三方，但得到对方书面同意或根据法律要求的除外。

四、争议处理

因履行本合同发生的争议，各方应协商解决。如不能达成协议的，提交中国国际经济贸易仲裁委员会并依该会仲裁规则仲裁解决，该仲裁裁决是终局的，对双方均具有约束力。

五、合同撤消和修改

在合同有效期内，合同一方要求撤消本合同的，应以书面通知对方，经协商一致后予以撤消。已受理申报（以乙方发出《受理确认书》为准）的不退还代理费。

在合同有效期内，合同一方要求修改、补充合同内容的，经协商一致后签定补充合同。

六、其他

由于政府行为、自然灾害等不可抗力等非任何一方的原因造成本合同无法履行或迟延履行的，受阻方应当在合理期限内将该情况通知对方，并出具相应的证明，因此造成的损失，彼此不承担对方的损失赔偿责任。

fda进口预申报委托协议

fda进口预申报委托协议

出口信用证抵押外汇借款合同

贷款人：＿＿＿＿＿＿＿＿＿＿＿＿借款人：＿＿＿＿＿＿＿＿＿＿

法定地址：＿＿＿＿＿＿＿＿＿＿＿法定地址：＿＿＿＿＿＿＿＿＿

贷款人和借款就借款人以信用证为抵押向贷款人申请外汇贷款一事共同协商签订合同如下：

1.双方同意以下定义

1.1?信用证：由＿＿＿＿＿＿＿＿银行开出通过＿＿＿＿＿＿＿通知编号为＿＿＿＿＿＿＿的＿＿＿＿＿＿＿信用证。

1.2?债务：指借款人在本合同项下应付的贷款本金、利息及与此有关费用。

2.贷款金额、币种和用途

2.1?本合同贷款金额的最高额为（大写）＿＿＿＿＿＿＿＿＿，（币种）＿＿＿＿＿＿＿。

2.2?本合同项下贷款限于借款人正常生产经营所需流动资金。

3.期限

3.1?本合同项下的贷款期限从合同签订日起＿＿＿＿＿个月。

4.利息与费用

4.1?本合同项下的贷款利率为＿＿＿＿＿＿＿＿＿。

4.2?贷款从第一笔提款日起息，利息以一年360天为基础，根据实际经过的天数计算。

4.3?贷款的结息日为每季第三个月的20日和贷款到期日。

4.4?借款人到期应付利息由贷款人主动从借款人开立在贷款人处的存款账户内扣收。

5.信用证的抵押和还款

5.1?本合同签订之日起，借款人将1.1条款下的信用证正本抵押给贷款人并由贷款人保管，作为贷款的还款保证。

5.2?在提交单据后，借款人保证叙做出口押汇并授权贷款人将押汇收入直接用于归还贷款。

6.陈述与保证

借款人在此作如下陈述与保证。

6.1?借款人是从事商务经营和有民事行为能力的经济法人，按中华人民共和国法律登记、注册，具有执行、履行所有民事行为的能力。

6.2?本合同的制定、签署、执行符合借款人所在地的法律、法规、条令、制度。借款人已办妥所有签署本合同的合法有效的手续。

6.3?保证根据出口信用证条款的要求按时发运货物，履行信用证规定的各项义务。

6.4?保证及时将抵押信用证规定的出口单据向贷款人提交议付。

6.5?按时支付利息和归还贷款。

6.6?保证按本合同2.2条款规定的用途使用贷款。

7.违约

下列事件属于违约

7.1?借款人未按信用证规定的日期内运出商品。

7.2?借款人在本合同第6条中所做的陈述与保证不真实或不履行。

7.3?借款人将抵押信用证项下的单据向别的金融机构议付。

7.4?借款人擅自改变贷款用途，挪用贷款。

7.5?借款人发生或将要发生_____、重组破产。

7.6?借款人违反本合同其他条款。

8.违约的处理

8.2?在这种情况下，贷款人有权采取以下部分或全部措施：

a.对违约金额处以20%～50%的罚息。

b.宣布部分或全部贷款到期，主动从借款人账户中扣还贷款及其他费用。

c.冻结借款人在贷款人处的存款户，如借款人的债务没有得到全部清偿，贷款人保留进一步追偿的权利。

9.其他

9.1?本合同在贷款人和借款人签字盖章后生效，有效期至借款人在本合同项下全部债务清偿后为止。

9.2?本合同受中华人民共和国法律管辖。

9.3?本合同中文正本一式2份，签约双方各执1份。

贷款人：＿＿＿＿＿＿＿＿（公章）借款人：＿＿＿＿＿＿＿（公章）

授权人：＿＿＿＿＿＿＿＿（签字）授权人：＿＿＿＿＿＿＿（签字）

签订日期：＿＿＿＿＿＿＿年＿＿＿＿月＿＿＿日

进口合同(样式一)

8.4 买方检验人员若发现“设备”有缺陷和/或不符合本合同规定的规格时，有权提出意见，卖方应充分考虑并自费采取必要措施排除缺陷，当缺陷排除后，应再次检验和试验，由此引起的费用均由卖方负担。

8.5 买方检验人员在卖方国家和制造厂的检验不代替“设备”运抵买方合同工厂现场的开箱检验，亦不能免除卖方按本合同第十章规定的保证责任。买方人员不签署任何证明文件。

8.6 卖方应免费为买方人员提供方便的工作条件，如必需的技术文件、图纸、检验工具和仪器等。

8.7 如买方不能在本章规定的期限内派出人员参加上述检验工作时，卖方将自行检验。

8.8 卖方供应的全部“设备”的开箱检验应在合同工厂现场进行，卖方有权自费派遣他们的检验人员到合同工厂现场参加此项检验，买方应在检验前一个月将开箱日检验期通知卖方，并为卖方检验人员提供工作的方便。

在双方会同开箱检验中如发现“设备”有短少、缺陷、损坏或包装与本合同规定不符合或质量标准与本合同8.1条和10.1条规定不符时，应作详细记录，并由双方代表签字。如属卖方责任，此记录即为买方向卖方要求换货、修理或补齐的有效证明。

8.9 如不属买方原因，卖方检验人员不能参加开箱检验时，买方有权自行开箱检验。如发现本合同7.8条所述问题系属卖方责任时，应委托中国商品检验局出具证明，以此作为买方向卖方要求换货、修理或补齐的有效证明。

卖方接到买方索赔证书后，应立即无偿换货、补发短缺部分或降低货价，并负担由此产生的到安装现场的换货费用、风险以及买方的检验费用。如卖方对索赔有异议时，应在接到买方索赔证书后两个星期内提出异议，双方另行协商；逾期，索赔即作成立。

卖方换货和/或补交货物的时间，不迟于卖方收到买方索赔证书后＿＿个月。

8.10 在开箱检验中，由于买方的原因，发现“设备”有损坏，通知卖方后，卖方应尽快补发、更换，其费用由买方负担。

8.11 上述检验并不能解除卖方对第九章、第十章所承担的责任。

8.12 在检验中，如发现卖方提供的检验所需的标准仍不完整或提供的不及时，经与卖方协商，买方有权按照买方国家现行标准进行检验。

第九章 安装、试车和验收

9.1 “安装”系指合同工厂全部设备、材料的装配、就位和联接等安装工作。“试车”系指机器和/或设备的单独或联动的试运转。

“投料试生产”系指合同工厂投入原料和公用工程以试生产。

“考核”系指检验本合同附件＿＿所规定的各项保证数值而进行的试验。

“验收”系指如果考核结果表明，本合同附件＿＿所规定的各项保证指标能够全部达到，则合同工厂即为买方所验收。

9.2 合同工厂的安装将在买方负责组织下和在卖方负责技术指导下进行，卖方有权对其进行详细设计有关的所有“设备”的安装以及界区接点的安装进行技术指导。

合同工厂的试车、投料试生产和考核应在买方组织安排下和卖方技术指导下进行。在安装工作开始前二个月，双方各自授权一名代表处理合同工厂从安装到验收期有关合同工厂的全部技术工作。具体工作应由双方代表友好协商安排。双方代表应充分合作，使合同工厂在本合同生效日后＿＿个月内建设完毕。

共17页，当前第10页1234567891011121314151617

委托方(以下简称甲方)：

被委托方(以下简称乙方)：

根据《中华人民共和国民法典》和其他法律法规有关规定，本着互利共赢、平等自愿的原则，订立该合同。现甲方委托乙方加工月饼产品，经双方协商一致，就有关代加工事宜达成如下协议，以供双方共同遵守。

第一条、代加工内容

甲方委托乙方为其代加工的月饼产品信息如下：

产品品牌：

加工数量及规格：

交付方式、时间及交付标准：

价格及支付方式：

(规格、标准、质量、交付时间、价格、包装、等事项，双方可根据实际情况协商进行修改)

第二条、甲方责任

1、每次以订单合同形式委托乙方为甲方加工月饼产品。

2、向乙方提供甲方生产授权委托手续、商标注册证以及对商业秘密的专有合法证明等相关法律文件。

3、每次订单向乙方提供加工品规格、数量、技术要求、交货时间等信息告知。

4、负责向乙方提供甲方内外包装及其它标有商标的包装及印刷品等与委托加工品有关的内容。(此处根据实际情况进行修改)

5、甲方有权对乙方的生产标准、产品质量进行检查监督，并提出意见和建议。

6、甲方按照国家相关法律法规和甲乙双方确定的标准及要求进行验收货品。

7、甲乙双方严守商业秘密,不能向第三方透露。本合同所签订的上述加工品的商标及图案文字为甲方所有，乙方不得私自在其他产品上进行使用或向他人提供。

第三条、乙方责任

1、严格按照甲方的委托内容及要求从事代加工活动。

2、按照甲方确定的规格、数量、质量、生产标准等进行生产，生产的产品符合国家相关法律法规和甲方的要求。

3、乙方验收甲方新到包装袋和礼盒及瓶罐等，因验收不当造成的损失由乙方负责。(根据实际情况修改，若包装由乙方也一并代加工则需要进行修改)

4、严格管理甲方提供的商标、包装及印刷品，因乙方管理不善，造成甲方商标、饰品及包装等丢失损坏，应承担相应赔偿及承担相应法律责任。

5、乙方应保证按时完成交货，如出现延迟交货、质量不合格等违约行为，甲方因此遭受的损失由乙方承担，同时甲方保留对乙方进行索赔的权利。

6、制造材料交付乙方后，乙方应自费承担储存和保管，如造成损坏和损失由乙方承担责任。

7、乙方应将各种原辅料损耗率控制在双方商定的范围内，损耗超出正常损耗率部分由乙方负责赔偿。

8、乙方应给甲方人员提供监控生产过程的便利和协助。

9、乙方不得将甲方包材、原料、印刷有甲方标识的物品用于为甲方加工之外的事项中。

10、在合同有效期间，乙方保证在遵照国家法律法规要求下不单方面拒绝甲方加工要求，为甲方加工生产所需的资质和生产条件符合国家相关法律法规的要求，并在资质和生产条件更改时及时告知甲方。

11、严守甲方的商业秘密。

12、乙方应对生产加工环节造成的质量问题负责，因乙方造成的质量问题导致甲方利益受损，乙方应对甲方损失进行赔偿。

13、乙方使用食品添加剂应该符合国家相关法律法规要求，若产品的安全、质量出现问题，由乙方承担全部责任。

14、甲方委托乙方生产的产品，乙方不得将该产品投向市场，销售权归甲方所有。

15、在生产过程中若发生安全事故或其它财产损失，应有乙方承担全部责任。

第四条、甲方的包材，印刷有甲方标识的物品和其他甲方交付给乙方的物品所有权归甲方所有。

第五条、验收标准

验收标准由甲乙双方商讨并符合国家相关法律法规要求为准。

第六条、违约责任

违约责任由甲乙双方商讨后以实际签订的委托加工合同为准。(甲乙方分别的违约责任与情形由双方协定)

第七条、合同有效期限为 年，合同自双方代表签字、盖章之日起生效，本合同正本一式两份，具有同等法律效力。未尽事宜，以订立补充协议的形式进行协商修订。

第八条、如遇争议，甲乙双方应先协商解决;协商不成，可依法向有管辖权的人民法院起诉。

甲方单位名称：

地址：

法定代表人：

授权代理人：

电话：

乙方单位名称：

地址：

法定代表人：

授权代理人：

电话：