进口转出口汇总20篇

委托人：__________(以下称“甲方”) 受托人：________(以下称“乙方”)

住址：______________________ 住址：____________________

法定代表人：_________________ 法定代表人：________________

电话：__________________ 电话：__________________

传真：_______________ 传真：_______________

邮编：__________________ 邮编：__________________

电子信箱：___________ 电子信箱：___________

甲、乙双方经友好协商，就甲方委托乙方代理进口本合同项下货物一事达成一致，兹同意按照下述条款签订本合同：

一、甲方委托乙方代理进口下述货物(以下称“货物”)

二、委托项目

1、甲方委托乙方以乙方名义与_________________以下称“外商”签订进口合同(以下称“进口合同”)，向其购买上述货物。

2、乙方向外商购买上述全部货物的总价为_________________(不含税款及代理费)。

3、进口合同中对货物的质量要求应为：

技术标准(标准制订人、标准名称、标准代号/编号等)：

特别约定：____________________________________________________

三、乙方义务

1、根据本合同的有关规定，以自己的名义与外商签订进口合同。

2、按照进口合同的规定，办理货物在中国境外的运输、保险事宜。

3、办理货物的进口报关、对外付汇手续。

4、按照本合同第六条的规定向甲方交付货物。

5、本合同规定的其它义务。

四、甲方义务

1、按照本合同第五条的规定，及时将购买货物所需全部资金、相关税费及代理费付至甲方账户。

2、按照本合同第六条的规定，及时提取货物。

3、应乙方要求，参加由乙方组织的有关货物技术标准、质量要求等方面的对外谈判及有关活动;必要时，负责编制合同附件。

4、检验货物并及时对货物质量问题提出异议。

5、本合同规定的其它义务。

五、付款条件

1、甲方应于_______前，凭乙方书面通知，将进口合同所规定的全部货款汇入乙方账户;甲方支付人民币的，折算汇率为：______

2、甲方应于_______前，凭乙方书面通知及海关出具的有关单据，将因进口货物而应向海关缴纳的税款汇入乙方账户。

3、甲方应于_______前，向乙方支付代理费，代理费金额为本合同第二条所规定的进口合同总价的________%。

六、货物交付

1、货物进口批文由___________方负责办理。

2、乙方应于货物预计到达中国口岸前_________日内，书面通知甲方有关情况;并于货物到达中国口岸后立即通知甲方。

3、甲方应在乙方发出到货通知后________日内赴交货地点收货。

4、货物在中国境内的法定商检由_______方负责，费用由_______方承担。

5、乙方应在_____________将货物交给甲方，货物自进关口岸至_____________的运输及保险由_____方负责，费用由____方承担

七、对外索赔

如外商在履行进口合同时有违约行为，甲方决定向外商提起仲裁或诉讼的，应当书面通知乙方并提供所需费用及协助，由此而产生的损失或利益由甲方承担或享有。如甲方未及时书面通知乙方并提供所需费用及协助，乙方无义务对外商提起任何仲裁或诉讼。

八、违约责任

1、如甲方未按照本合同第五条的规定及时支付有关款项，应向乙方支付滞纳金，金额为逾期支付部分的万分之五/每天;逾期超过十五天的，乙方有权解除本合同并要求甲方赔偿因此而遭受的一切损失。

2、在甲方按照本合同第五条的规定支付全部款项前，乙方有权留置全部货物

3、如甲方未能按照本合同第六条的规定及时提取货物，应承担延迟提货期间发生的货物仓储费及其它费用;逾期超过十五天不提货的，乙方有权解除合同并处置未提取货物。

九、争议处理

凡因执行本合同发生纠纷的，双方应协商解决;协商不成的，任何一方均可向人民法院提起诉讼。

十、其它

1、本合同自甲、乙双方代表人签字并盖章之日起生效。

2、本合同一式二份，甲、乙双方各执一份，效力均等。

4、本合同未明确规定的事项，按照《中华人民共和国民法典》及《关于对外贸易代理制的暂行规定》(对外经济贸易部________年________月_______日发布)的规定执行。

十一、特约条款(如本合同其它条款与本款的规定发生冲突，以本条的规定为准)

__________________________________________________________

委托人：________________ 受托人：________________

代表人签字：____________ 代表人签字：____________

盖章：__________________ 盖章：__________________

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

进口合同(样式一)

如属微小缺陷，可由买方自行消除，但由此引起的费用由卖方负担。

10.6 在保证期内，如由于卖方责任需要更换、修理有缺陷的“设备”而使本“合同工厂”停机时，则保证期应按实际停机时间作相应的延长。新更换和补充修复的“设备”的保证期为被买方验收后十二个月。

10.7 在保证期满后三十天内，买方出具有在保证期内发现的“设备”缺陷的索赔证书仍然有效。

10.8 如由于卖方责任，在考核试车不能达到本合同附件＿＿规定的一项或多项技术经济指标时，卖方必须采取有效措施在卖方收到买方书面通知后＿＿个月内使之达到各项保证指标并承担由此产生的一切费用。逾期如仍不能达到本合同附件＿＿所规定的保证指标时，卖方应承担罚款，其计算办法如下：

卖方支付罚款，则本“合同”即为买方所验收，并由买方出具本“合同工厂”验收证书正、副本各一份交给卖方。

10.9 如由于卖方责任未能按合同第四章规定的交货期交货时，买方有权按下列比例向卖方收取罚款：

迟交1至4周，每周罚迟交货物金额的＿＿％；

迟交5至8周，每周罚迟交货物金额的＿＿％；

迟交9周及以上，每周罚迟交货物金额的＿＿％；

不满一周按一周计算。

迟交货物的罚款总金额不超过合同总价的＿＿％

卖方支付迟交罚款，并不解除卖方继续交货的义务。

任何一批货物迟交超过＿＿个月时，买方有权终止部分或全部合同。

第十一章 侵权和保密

11.1 卖方同意向买方转让非独占的，不可转让的权利，并允许买方在中华人民共和国内使用卖方的＿＿工艺进行“合同工厂”的工程设计、建设和操作，以设计、制造、销售和出口合同产品＿＿。其年产量为＿＿，其工艺说明见本合同附件＿＿，其品种规格详见本合同附件＿＿。

卖方提供买方用于本合同工厂的专有技术和专利如下：

专有技术登记号：

专利登记号：

专有技术、研究报告、资料等包括在本合同附件＿＿里。

11.2 在本合同生效后三十天内，卖方应向买方提供卖方国家有关当局签发的包括本合同第11.1条所述的工艺的专利登记证书的影印本二份。

11.3 如果任何第三方对买方使用本合同第11.1条所规定的专利和专有技术提出任何异议时，卖方应负责处理，买方对此无任何责任。

11.4 本合同生效后＿＿年内，如卖方对本合同第11.1条所规定的专利和专有技术有所发明和改进时，不管其发明和改进是否已获得专利权，卖方均应向买方免费提供详细资料。买方有权将上述资料用于合同工厂。如有必要，关于技术指导的一切费用由买方根据双方同意的本合同第＿＿章和附件规定的条件负担。

11.5 本合同生效后＿＿年内，买方应对本合同11.1条所规定的专有技术对任何第三方予以保密，对参加本合同工厂的计划、安装和施工等工作的其他单位除外，然而他们必须承担同样的保密义务。在保密年限内，若专有的一项或多项，被第三者公开后，买方不再承担保密义务。

11.6 卖方对买方所提供的设计基础和现场条件资料的保密期限不受上述时间的限制。

第十二章 不可抗力

共17页，当前第13页1234567891011121314151617

贷款人：___________________________

法定地址：_________________________

借款人：___________________________

法定地址：_________________________

贷款人和借款就借款人以信用证为抵押向贷款人申请外汇贷款一事共同协商签订合同如下：

1.双方同意以下定义

1.1?信用证：由_________________银行开出通过________________通知编号为________________的______________信用证。

1.2?债务：指借款人在本合同项下应付的贷款本金、利息及与此有关费用。

2.贷款金额、币种和用途

2.1?本合同贷款金额的最高额为（大写）___________________________，（币种）_____________________。

2.2?本合同项下贷款限于借款人正常生产经营所需流动资金。

3.期限

3.1?本合同项下的贷款期限从合同签订日起_______________个月。

4.利息与费用

4.1?本合同项下的贷款利率为___________________________。

4.2?贷款从第一笔提款日起息，利息以一年360天为基础，根据实际经过的天数计算。

4.3?贷款的结息日为每季第三个月的20日和贷款到期日。

4.4?借款人到期应付利息由贷款人主动从借款人开立在贷款人处的存款账户内扣收。

5.信用证的抵押和还款

5.1?本合同签订之日起，借款人将1.1条款下的信用证正本抵押给贷款人并由贷款人保管，作为贷款的还款保证。

5.2?在提交单据后，借款人保证叙做出口押汇并授权贷款人将押汇收入直接用于归还贷款。

6.陈述与保证

借款人在此作如下陈述与保证。

6.1?借款人是从事商务经营和有民事行为能力的经济法人，按中华人民共和国法律登记、注册，具有执行、履行所有民事行为的能力。

6.2?本合同的制定、签署、执行符合借款人所在地的法律、法规、条令、制度。借款人已办妥所有签署本合同的合法有效的手续。

6.3?保证根据出口信用证条款的要求按时发运货物，履行信用证规定的各项义务。

6.4?保证及时将抵押信用证规定的出口单据向贷款人提交议付。

6.5?按时支付利息和归还贷款。

6.6?保证按本合同2.2条款规定的用途使用贷款。

7.违约

下列事件属于违约

7.1?借款人未按信用证规定的日期内运出商品。

7.2?借款人在本合同第6条中所做的陈述与保证不真实或不履行。

7.3?借款人将抵押信用证项下的单据向别的金融机构议付。

7.4?借款人擅自改变贷款用途，挪用贷款。

7.5?借款人发生或将要发生_____、重组破产。

7.6?借款人违反本合同其他条款。

8.违约的处理

8.2?在这种情况下，贷款人有权采取以下部分或全部措施：

A.对违约金额处以20%～50%的罚息。

B.宣布部分或全部贷款到期，主动从借款人账户中扣还贷款及其他费用。

C.冻结借款人在贷款人处的存款户，如借款人的债务没有得到全部清偿，贷款人保留进一步追偿的权利。

9.其他

9.1?本合同在贷款人和借款人签字盖章后生效，有效期至借款人在本合同项下全部债务清偿后为止。

9.2?本合同受中华人民共和国法律管辖。

9.3?本合同中文正本一式2份，签约双方各执1份。

贷款人：______________（公章）

授权人：______________（签字）

借款人：______________（公章）

授权人：______________（签字）

签订日期：____________________

这个寒假，为了自己毕业后能更好的投入工作，也为了开阔自己的眼界，提高自己的能力，我匆匆离开家乡，来到了远在新疆的纺织公司，从奎屯、石河子、五家渠我们学习了很多在学校在书中学不到的东西。

在这里，我们学习到了一切从实际出发，对待每一件事都做到专一性的行事原则，我很庆幸自己当初的选择，我相信在这里我们能够一展所长，走好未来的路。公司的生产车间给人舒适的感觉：宽敞明亮，每个生产区之间、每台设备之间都隔开一定间隔，并装有“简易空调”，保障了工人的基本权益。为公司的每位员工提供了贴心的环境，也为每位员工提供了良好的福利。能够在这样的公司里工作我感到信心十足。

在工厂，我们学习并详细了解了从下订单——原棉检验——配棉——拌花——清花——梳棉——并条——粗纱——细沙——络筒——品质检验——交单等所有工序，理论与实践相结合让我们所学的知识更加系统充实。而所有工序中，品质检验是全厂最最核心、要求最高的部分。品质检验与车间生产关系更表现为：车间生产过程中每到一个阶段都需要品质检验。而公司将很大精力放在了这上面，对质量要求很高，可见在其竞争策略中，产品质量居于首位。由于华孚不必担心供应链、库存管理和产品销售问题，所以他有大量精力投放在品质检验上，只要在成本许可范围内，将质量做到最好，就不需要担心其他问题了。

在这次实习中，有一点我感受很深。在学校，理论的学习很多，而且是多方面的，几乎是面面俱到;而在实际工作中，可能会遇到书本上没学到的，又可能是书本上的知识一点都用不上的情况。或许工作中运用到的只是很简单的问题，只要套公式似的就能完成一项任务。因此，在平时我们要学习更多的知识层面去应付各种工作上的问题。毕竟，即将毕业的我们马上就要走向社会、走向工作岗位。只懂得纸上谈兵是远远不及的，以后的人生旅途是漫长的，要锻炼自己成为一名合格的、对社会有用的人才，我们就要不断地学习，努力地向上，只要你去努力，只要你伸出你那随时可以伸出的手，周围的机会就会随时可能属于你。

岗位职责：

1、按照面料申购单和采购要求及时下达订单，并对面料供应商的生产进度进行控管，以确保质量和交期;

2、比价采购，控制面料的采购成本;

3、及时处理并解决面料的质量问题及索赔工作;

4、负责与面料供应商来往的对帐工作并及时填写付款申报主管审批;

5、负责收集各季面料信息，以提供公司参考的依据;

6、辅助设计师面料开发和调样工作，并建立样品原始封样档案资料。

职位要求：

1、熟悉各种面料开发流程，对业务谈判有一定魄力，具有丰富的供应商的采购渠道的资源;

2、熟悉面料常规性能

3、3年以上品牌女装面料采购工作经验

4、工作认真负责，仔细，反映灵敏，责任心强，有良好的职业道德和较强的执行力

甲方__(供方)与乙方__(购方)达成如下协议：

第一条 合同标的

供方同意出售，购方同意购买__。(详见本合同附件1，该附件为本合同不可分割的一部分)。

第二条 技术资料

供方应向购方提供设备使用及维修技术资料一份。

第三条 供货条件--包装和标记

供方应在设备全额信用证开立之后的____个月内用密封集装箱或其它包皮包装从____发运设备。

供方有权从任何对其方便的港口发运设备。

供方应把设备运至商定的原苏联东海岸____港。

自设备从船航运抵独联体远东港口时起灭失和(或)损坏的风险由供方转移到购方。

供方承担设备运输的一切费用及运抵港口前的保险费。

设备从独联体港口继续运到安装地的一切费用由购方承担。

发货前____天内供方应向购方通知发运情况，明确交通工具的种类和名称、计划发运日期及其它有关信息。

购方应支付履行海关手续的所有费用和一切与设备运入独联体境内有关的开支。

设备和技术资料用密封集装箱或其它包皮装运并附具包装清单，标记使用英语刷写。

发货单证包：

1)发货帐单(三份)

2)海运提单

3)装箱单

4)保险单

第四条 设备质量

按本合同所供设备的质量应符合生产厂家的技术条件。如生产厂家有保证书，应用保证书加以确认。

第五条 合同价格和支付条件

所供设备的总额为____美元(CIF价)。购方应在合同签定后的__天内开立以供方为受益人的不可撤销的保兑信用证。该信用证在开立时起的__天内有效。

开证行应为独联体外经银行或日本、南韩、西欧、美国、加拿大的某家银行。一切与在开证行开立信用证有关的费用由购方承担，而一切与议付行收取信用证有关的费用由供方承担。支付在向议付行提交下列单据后进行：

1)发货帐单(3份)

2)海运提单

3)装箱单

4)保险单

第六条 保证

供方保证所供设备在投入使用日起的____个月内，但不超过发货日起的____月内正常工作。

第七条 不可抗力

在发生不可抗力情况致使合同一方不能全部或部分履行本合同的义务时，按此种不可抗力情况存在的时间推迟履行合同义务。

不可抗力情况是指双方不能预见或预测的由于非常事件而出现的情况，即：影响履行所承担义务的火灾、风暴、地震和其它自然现象，以及战争、任何性质的军事行动，各国政府的封锁与制裁等。

因不可抗力情况而不能履行义务的一方，应在不可抗力情况发生和停止的20天内书面通知另一方关于其发生和停止的情况。收信人所在国邮局在收到通知函日加盖的日期作为得悉该信息的日期。

协约双方国商会出具的证明书将成为证明上述情况发生及延续时间的必要证据。如有些情况延续3个多月，每一方都有权拒绝继续履行本合同义务，同时任何一方都无权要求对方赔偿可能发生的损失。

第八条 仲裁

所有可能由本合同而产生的纠纷或分歧均应由合同双方友好解决。如果无法解决纠纷，则该纠纷应提交莫斯科市原苏联工商会下设外贸仲裁委员会按其业务规章审理(提交一般法院审理者除外)，该委员会的决定对于双方为终审，必须执行。

第九条 通知

一切通知等双方均应按本合同条件以书面形式进行。

第十条 语言

本合同用俄语书就。供方提供英文的全部技术资料和供货单证。

第十一条 其它条件

自本合同签署之日起，所有在此以前的有关谈判和往来信函均告失效。对本合同的任何修改和补充只有在以书面形式形成并经双方有关全权代表签字后方能生效。任何一方都无权在未征得对方书面同意之前将自己对合同的权利和义务转让给第三者。

本合同于__年__在苏联__签署，一式两份，两份具有同等效力。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

2020年外贸总结开头

伴随着新年钟声的临近，我们依依惜别了20xx年，满怀热情的迎来了充满希望的20xx年。在这年终之际，现对来公司九个月的时间里所作的工作汇报如下：

20xx年即将画上圆满的句号，这一年是我人生的一个转折点。由一名学生转型为社会人士，在机遇与挑战共存的竞争时代，我开始了自己的追梦生涯。回顾这三个月与新起点同行的点滴，颇有感触，现将工作以来的感受和工作体会总结如下。

时间飞逝，不知不觉来到公司已经半年了，就快到过年的时候了。记得刚来的时候，由于经验的缺乏，是即兴奋又担心。最初是抱着学习和锻炼的态度来到这里的。。半年下来，觉得自己学到了很多，也进步了很多，在生活和工作上都有了一个全新的体验。虽然没有什么大的贡献，但也算经历了一段不平凡的考验。在此，当然首先非常感谢公司给我这个机会，让我在工作中不断地学习，不断地进步，慢慢提升自身的素质，同时也非常感谢大家在这段时间对我的帮助。

工作已经有两个月了，渐渐地由对外贸行业的新奇转入到琐碎的细节中。2。刚进公司的时候，我是有些忐忑的，一方面来自其他外贸业务员的描述：耐力，压力，还要考验反应力。另一方面来自对这个行业的陌生，虽然在学校系统的学过，但那也只能作为实战的参考借鉴。我知道挑战已经开始。

进口代理合同

甲方：_________

地址：_________

乙方：_________

地址：_________

甲乙双方就乙方委托甲方代理_________进口事宜，经友好协商，达成协议如下：

一、甲方代理乙方进口以下商品：

1.商品名称：_________

2.规格及数量：_________；总数量：_________

3.产地：_________

4.价格：_________；总金额：_________

5.包装：_________

以上条款最终以甲方对外欠约合同为准。

二、双方责任：

（一）甲方责任：

1.对外签署合同并向乙方提供合同副本。

2.收到乙方的开证保证金后按合同要求对外开立信用证。

3.负责办理代理进口报关、商检及其他接货手续，但所有相关费用均由乙方承担。

4.如需索赔，在收到乙方的索赔委托、依据及索赔费用后及时代理乙方按甲方对外签署的合同规定向外索赔，索赔利益归乙方所有，但代理手续费不做任何退回。

5.如乙方未按规定向甲方付清全款，甲方有权没收保证金并自行处理货物，以及向甲方索赔由此而造成的其他损失。

6.及时向乙方通报进口合同的执行情况，特别是货物备妥期、装运期、预计抵达情况，以便乙方及时做好接货准备。

7.收到国外正本单据审核无误后，及时向乙方结算。汇率以甲方实际对外付汇日汇率为准。

（二）乙方责任：

1.本协议签订后五个工作日内向甲方支付合同全额_________％的代理手续费。

2.协议签订后三个工作日内向甲方支付合同金额_________％作为开证保证金。

3.接受甲方采用的货物进口标准合同的固定条款。承认甲方代表乙方承担这些合同条款对“买方”的权利和义务的规定。

4.收到甲方交来的对外进口合同副本后，立即进行核对。如发现同协议要求有不符点时，应在收到合同副本后三个工作日内以传真或电报通知甲方。否则，即视为乙方已承担该合同的权利和义务。

5.货到目的港后，应积极配合甲方的港口货运代理办理货物的交接事宜。乙方必须在货到后_________天内向甲方交清货物的全部税款（进口关税及增值税）和港口所发生的所有费用（报关费、商检费、港杂费、仓储费及其他相关费用）及全部货款，以便甲方放货。

6.如果外商系乙方自己所定，如发生迟交货或不交货等问题由乙方负责追索，甲方协助。

三、索赔处理：

（一）甲方必须认真遵守《中华人民共和国进出口商品检验法》，发现问题时，及时处理。凡属于船方或_____责任的，应会同甲方在港口的货运代理向有关责任方面索要货损、货差证明，通过甲方向_____公司办理有关索赔手续。凡属于国外发货人责任的短重及/或品质索赔，及时申请商检，并在合同规定的索赔有效期终了前15天将商检证书送到甲方，以便甲方审核及时对外提赔。

（二）甲方必须积极办理属于发货人责任的短重及/或质量索赔。甲方不承担直接的赔偿责任，但有义务代表乙方向国外发货人提赔，并须据理力争督促国外发货人尽速理赔。甲方须及时向乙方通报对外索赔进展情况，并对此索赔案负责到底直至乙方同意结案为止。

四、争议解决：

凡与本协议有关的争议，甲乙双方应本着长期合作、互惠互利的原则，依照《_____》的有关规定，友好协商解决。若协商不成，任何一方有权向协议签订地的人民法院起诉。

五、其它本协议未尽事宜，适用对外贸易经济合作部《关于对外贸易代理制的暂行规定》。

六、本协议一式两份，具有同等法律效力，自签订之日起生效。

甲方（盖章）：_________乙方（盖章）：_________

代表人（签字）：_________代表人（签字）：_________

_________年____月____日_________年____月____日

英文求职信模板（五）

April 13,2000 P.O. Box 36 BIIT University Beijing,China 100000 Dear Sir/Madam: Are you searching for a telecommunications manager with expertise in project management and team leadership? I specialize in creating and implementing high-performance strategies that directly impact growth and profitability of large telecommunications companies. In addition to my knowledge of business processes, I also offer proficiency in telecom software development and cutting-edge technologies. I am relocating to Shenzhen and would be interested in opportunities with your firm. Currently, I serve as manager for BIT Companys Information Industry Division. Briefly, some of my accomplishments include: Developed a tool to track and forecast price,quantity,and revenue, which enables client to monitor business performance Implemented a customized end-to-end testing process and SQL database My business acumen, technical expertise, and leadership capabilities have contributed to a number of successful projects. The enclosed resume outlines my credentials and accomplishments in greater detail. I would welcome an opportunity to meet with you for a personal interview. Sincerely, Gu Bin

甲方：

乙方： (自然人)

一、甲方责任义务：

1. 甲方同意乙方以深圳市纪友隆进出口有限公司名义对外开展业务活动。

2. 甲方有义务根据乙方的要求对外签订外贸合同，对内与供应商签订购销合同。合同签订后，即时将合同副本送交乙方。

3. 甲方将无偿为乙方提供谈判场所;提供通讯便利，但其实际发生的费用应在乙方业务收入中扣减。无偿提供出口业务及法律法规咨询;按时提供全套公司单证;在乙方指定地点办理海关、商检备案手续。

4. 甲方在货物上船后与乙方再次確認提单资料，出正本提单后交给乙方，由乙方自行寄给收货人;(适用于走海运货物)，如果乙方有特殊說明的除外.

5. 甲方保证维护乙方的商业秘密。并通过自己的渠道协助乙方扩大业务。

6. 甲方保证乙方运用资金的安全，承诺不挪用，不拖付乙方资金往来，并在安全收汇后2--3个工作日，按照当日牌价结算人民币货款给乙方或由乙方指定的生产厂商。甲方保证乙方的利润所得，并根据双方商定的时间方式，向乙方支付。

7.如果由于甲方的问题导致货物不能准时出口到港(目的地)所产生的费用由甲方负责(船公司的问题或由于不可抗力的因素影响除外)。

二、乙方责任义务：

1. 遵守法律和国家外贸、外汇、海关方面的政策。

2. 维护甲方的声誉和利益，遵守甲方及其它双方商定的工作程序。

3. 自行承担自身业务的所有费用。

4. 乙方提供给甲方的相关出货资料必需真实，有效，并具有合法性。

5. 如乙方指定货代以及需异地报关出口的货物，乙方应通知甲方其货代名称、地址、联系人、电话、传真等详细资料，并允许甲方与货代直接联系，在货物正式报关出口前，由货代将装箱单、发票传真给甲方确认

6. 单单结汇。乙方愿意支付甲方每笔转帐金额的 千分之三(RMB)，但每票不低于(RMB) 贰佰元整 ，不高于(RMB) 壹仟元整 做为手续费，如在转帐过程中(非甲方操做失误)产生的银行费用由乙方自行承担。

三、法律责任：

1. 双方必需严格执行本协议，若因外商原因导致外销合同延迟履行、不能完全履行或不能履行时, 至使甲方不能履行本代理协议时, 甲方不承担任何责任。但在乙方提出书面请求并提供费用协助下, 代理人有义务向外商交涉索赔。

2. 在本合同项下，如一方违约，除依法依约承担违约责任，赔偿责任以及赔偿守约方的实际损失外，还应承担守约方为实现债权而支付的费用，该费用包括但不限于律师费用、诉讼费用、差旅费、通讯费。

3.自违约方违反本合同约定及法定义务之日起,其于后支付的任何款项按以下顺序清偿：(1)守约方为实现权利支付的费用;(2)利息或违约金、损失赔偿金;(3)货款本金。

四、争议解决方式：

1.本合同适用《民法典》及我国对外贸易代理的有关规定。

2.委托代理过程中发生纠纷，由双方协商解决，协商未果的，由合同签订地法院裁决。

五.其它事项：

1.本协议一式两份双方各执一份，具有同等的法律效力. 自双方签字盖章之日起生效，有效期壹年，协议到期停止执行. 但在双方帐务、事务未清之前，协议条款继续生效，如帐务、事务结付完毕此协议条款自行作废，如继续执行，协议重签才有效。

2.甲乙双方在执行过程中，若对本协议上述条款有不同的见解和异议，需经双方协商研究同意后方能够进行修改和补充。补充或修改的內容应以书面提出并经双方签章后生效，并与本代理出口合同具有同等的法律效力。

甲方： 乙方：

法人代表： 身份证号：

签订日期： 年 月 日 签订日期： 年 月 日

2015年外贸业务员年总总结模板

工作已经有两个月了，渐渐地由对外贸行业的新奇转入到琐碎的细节中。刚进公司的时候，我是有些忐忑的，一方面来自其他外贸业务员的描述：耐力，压力，还要考验反应力。另一方面来自对这个行业的陌生，虽然在学校系统的学过，但那也只能作为实战的参考借鉴.我知道挑战已经开始。 很幸运，我的职场生活有一个很好的开端。公司安排销售经理指导我，在阿霞的帮助下，我先从熟悉产品的分类，型号，和性能开始。然后一步一步了解整个下单，生产到发货的流程。不得不说我走了一个捷径，公司安排我先跟老客户，窃喜的同时，也强烈希望能有自己独立的客户。

沟通、信任、协作是这两个月听的最多的，我想只有真正操作起来才能真正了解其中的含义和重要性，销售部作为内外的连接点，沟通显得尤为重要。对外：要了解客人的想法，尽力满足客人的需求。对内：要与各个部门衔接紧凑，哪一个环节出错都可能失去客人的信任，最终影响到公司的运转。

在跟客户的时候我还存在着很多问题,我举例说明：

eke:这是我接手的第一张单，也是第一个做信用证的单。信用证是外贸中支付方式最安全但也是最棘手的支付方式，比起其他付款方式，信用证多了审单的步骤，而且稍不留神就会增加多余的费用。就拿发票加签来说，以为审单不仔细，没来得及和客人沟通，发票加签减小了这张单的利润。

eke是6月19出的货，而原先信用证的交单期是6月9号，和客人交涉以后，客人同意将信用证延期至7月9日。货出后的一段时间就要准备单证了，最复杂的是产地证和提单，由于我没有将信用证的到期日发给船务，导致进程缓慢，到期日前几天产地证和提单还没办妥。而财务那边由于汇美金给船公司，平时只用一个工作日就能到账，却浪费了4.5天才到账。18号拿到提了信用证有效期和交货期，而交单期并没有改。单和产地证后，立即赶到银行提交了单证。下午，银行的工作人员就打电话过来，说客人改单时只改了交货期和有效期，但是交单期没改。由于和客人沟通不仔细，便又多了一个不符点。 做这张单收获很大，让我明白了沟通和时间的重要性。就算再麻烦，有良好的沟通方式，任何问题都有商量和解决的余地。还有就是细心，每一句话每一个字母都要研究细细斟酌，稍不留意就会增加额外的成本。两个月下来，和客人通了不少的电话，刚开始很不适应一些客人的口音，还有一方面，和客人谈判的的技巧不够。拿nok来说，货已经生产完了。要打电话给客人打款。客人满口答应明天汇款。后来发现我的耐性还不够，这样的事情连续发生了3次，至今还没有打款发货。

两个月的工作当中，由于工作能力和阅历不够，做起事来总显得有些畏手畏脚，在工作上不敢有突破。在以后的工作中，要通过学习，逐渐提高自己的能力和业务水平。脑子要灵活，不能原地踏步满足现状，要切合公司的发展方向，培养自己创新的能力.更好的处理和客人.同事的关系，为业务的开发和老客户的稳定打下基础。

最后，我总结一下两个月的工作，一是为了梳理思路温故知新，二是为了展望未来，更好的提高自己。

1.努力学习，让自己的能力和素质跟上公司发展的脚步。虚心向身边同事学习，取人之长补己之短，丰富自己。还要培养自己思考的习惯，遇事三思，要比客人先想到，才能给客人最好的服务。

2.严谨细致，大局观要强。工作中，客人和公司的利益有时难免会发生一些冲突，此时要有很好的大局观，如果自己的能力有限，要请教上司，处理好分歧。

3.要培养良好的时间观念，公司领导多次教导我，时间就是生命线，顾客等不得，订单也等不得。要及时的处理一切公司有关的事情，绝不允许卡在最后一道关口，要早请示早回报，给客人留下好的印象。

这份简短的总结还有很多不完整的地方，在以后的工作中我还要不时的回头总结，一个人有缺点不可怕，可怕的是没有提出来加以解决。我也相信在领导和同事的帮助之下，我可以更加的完善自己，通过自己的努力和拼搏，和公司一起发展。在此，我要特别感谢公司领导和各位同事在工作和生活中给予我的支持和关心，这是对我工作最大的肯定和鼓舞，我真诚的表示感谢!

国产医疗器械委托申报合同书

合同编号：京典y?号

甲方：有限公司（以下简称甲方）

乙方：北京XX公司（以下简称乙方）

经甲乙双方协商就?产品申报医疗器械相关事宜达成如下合同?：

一、双方约定：

1、甲方同意将产品的申报工作全权委托北京X公司办理。

2、在申报过程中双方相互协商、相互协助。

3、乙方为甲方保守秘密，不得将甲方所提供的产品资料泄露他人。

4、在申报期间若实验费、评审费、申报流程及要求等因政策调整，按新政策执行，双方不负任何责任。

二、双方责任：

1、甲方向乙方提供申报产品的相关资料｛医疗器械生产企业资格证明、产品技术报告、安全风险分析报告、产品性能自测报告、产品使用说明书、产品在生产国（地区）允许生产销售的证明文件（自由销售证明）｝。

2、甲方需向乙方提供送检必备资料（产品说明书和申报企业相关信息和送检样品等），乙方方可安排送检工作。

3、甲方向乙方提供代理费共计人民币?万元。

4、乙方负责?的产品申报、资料整理、相关咨询等全部申报工作。

5、自合同生效日起至?月内完成申报前的准备工作，并报药监局终审。

6、药监局受理后?月内取得医疗器械批准证书。

7、如在实验期内发现产品本身存在问题，乙方应及时通知甲方，讨论解决办法，如需重做实验，其费用将由甲方承担。

三、经费支付方式：

1、自合同生效日起3日内，甲方向乙方支付代理费共计人民币万元。

2?、取得药监局受理通知书后3日内，甲方将评审费汇至评审_____通知书上指定的帐号。同时向乙方支付代理费共计人民币万元。

3、取得药监局颁发的医疗器械批准证书后3日内，甲方向乙方支付代理费共计人民币万元。

4、乙方以书面形式通知甲方，甲方取得通知后3日内，直接向检测机构支付实验费等，乙方并向相关机构索取发票提供给甲方。

5、乙方在确定收到甲方所汇代理费用后出具相应数额收据。

四、违约及其它：

1、如因乙方责任致使实验终止或申报失败，乙方将退还甲方所支付的代理费用。

2、如因乙方原因致使甲方申报资料失秘，乙方须向甲方支付保密违约金10万元整人民币。

3、如甲方延迟支付本合同规定的各项款项，将按每日千分之叁（3‰）违约金支付给乙方，若超过30日以上乙方有权终止合同，甲方必须在3日内补足实验费和代理费。

4、如甲方延迟支付产品实验费及评审费等申报产品的所需费用，产品申报周期将按延迟到款周期续延，乙方不付任何责任。

5、如因乙方原因导致申报延期，将按每日千分之叁（3‰）违约金支付给甲方，如超过30日以上甲方将有权终止合同，并要求乙方退还甲方所支付的费用。

6、因政策的改变或不可抗原因致使申报受阻或申报失败，甲乙双方都不承担责任，应视具体情况协商解决。

五、本合同一式两份，甲乙双方各执一份。

甲方单位盖章：乙方单位盖章：

甲方代表人签章：乙方代表人签章：?

年月日?年月日

出口代理协议

在平等互利的基础上发展贸易，有关方按下列条件签订本协议：

This Agreement is entered into between the parties concerned on the basis of equality and mutual benefit to develop business on terms and conditions mutually agreed upon as follows:

1.订约人（Contracting Parties）

供货人（以下称甲方）：_________

销售代理人（以下称乙方）：_________

甲方委托乙方为销售代理人，推销下列商品。

Supplier:(hereinafter called "party A")_________

Agent:(hereinafter called "party B")_________

Party A hereby appoint Party B to act as his selling agent to sell the commodity mentioned below.

2.商品名称及数量或金额（Commodity and Quantity or Amount）

双方约定，乙方在协议有效期内， 销售不少于_________的商品。

It is mutually agreed that Party B shall undertake to sell not less than_________of the aforesaid commodity in the duration of this Agreement。

3.经销地区（Territory）

只限在_________。

In_________only.

4.订单的确认（Confirmation of Orders）

本协议所规定商品的数量、价格及装运条件等，应在每笔交易中确认，其细目应在双方签订的销售协议书中作出规定。

The quantities， prices and shipments of the commodities stated in this Agreement shall be confirmed in each transaction， the particulars of which are to be specified in the Sales Confirmation signed by the two parties hereto.

5.付款（Payment）

订单确认之后，乙方须按照有关确认书所规定的时间开立以甲方为受益人的保兑的、不可撤销的即期信用证。乙方开出信用证后，应立即通知甲方，以便甲方准备交货。

After confirmation of the order， Party B shall arrange to open a confirmed， irrevocable L/C available by draft at sight in favour of Party A within the time stipulated in the relevant S/C. Party B shall also notify Party A immediately after L/C is opened so that Party A can get prepared for delivery.

6.佣金（Commission）

在本协议期满时，若乙方完成了第二款所规定的数额，甲方应按装运货物所收到的发票累计总金额付给乙方_________％的佣金。

Upon the expiration of the Agreement and Party Bs fullfilment of the total turnover mentioned in Article 2， Party A shall pay to Party B_________% commission on the basis of the aggregate amount of the invoice value against the shipments effected.

7.市场情况报告（Reports on Market Conditions）

乙方每3个月向甲方提供一次有关当时市场情况和用户意见的详细报告。同时，乙方应随时向甲方提供其他供应商的类似商品样品及其价格、销售情况和广告资料。

Party B shall forward once every three months to party A detailed reports on current market conditions and of consumers comments. Meanwhile， Party B shall，from time to time， send to party A samples of similar commodities offered by other suppliers， together with their prices， sales information and advertising materials.

8.宣传广告费用（Advertising & Publicity Expenses）

在本协议有效期内，乙方在上述经销地区所作广告宣传的一切费用，由乙方自理。乙方须事先向甲方提供宣传广告的图案及文字说明，由甲方审阅同意。

Party B shall bear all expenses for advertising and publicity within the aforementioned territory in the duration of this Agreement and submit to Party A all patterns and/or drawings and description for prior approval.

9.协议有效期（Validity of Agreement）

本协议经双方签字后生效，有效期为_________天，自_________年_________月_________日至_________年_________月_________日。若一方希望延长本协议，则须在本协议期满前1个月书面通知另一方，经双方协商决定。

若协议一方未履行协议条款，另一方有权终止协议。

This Agreement， after its being signed by the parties concerned， shall remain in force for_________days from_________to_________If either Party wishes to extend this Agreement， he shall notice， in writing， the other party one month prior to its expiration. The matter shall be decided by the agreement and by consent of the parties hereto. Should either party fail to implement the terms and conditions herein， the other party is entitled to terminate this Agreement.

10.仲裁（Arbitration）

在履行协议过程中，如产生争议，双方应友好协商解决。若通过友好协商达不成协议，则提交中国国际贸易促进委员会对外贸易仲裁委员会，根据该会仲裁程序暂行规定进行仲裁。该委员会的决定是终局的，对双方均具有约束力。仲裁费用，除另有规定外，由败诉一方负担。

All disputes arising from the execution of this Agreement shall be settled through friendly consultations. In case no settlement can be reached， the case in dispute shall then be submitted to the Foreign Trade Arbitration Commission of the China Council for the Promotion of International Trade for arbitration in accordance with its provisional rules of procedure. The decision made by this Commission shall be regarded as final and binding upon both parties. Arbitration fees shall be borne by the losing party ，unless otherwise awarded.

11.其他条款（Other Terms & Conditions）

（1）甲方不得向经销地区其他买主供应本协议所规定的商品。如有询价，当转达给乙方洽办。若有买主希望从甲方直接订购，甲方可以供货，但甲方须将有关销售确认书副本寄给乙方，并按所达成交易的发票金额给予乙方_________％的佣金。

Party A shall not supply the contracted commodity to any other buyer(s) in the above mentioned territory. Direct enquiries， if any， will be referred to Party B. However， should any other buyers wish to deal with Party A directly， Party A may do so.But party A shall send to Party B a copy of Sales Confirmation and give Party B_________% commission on the basis of the net invoice value of the transaction(s)concluded.

（2）若乙方在_________月内未能向甲方提供至少_________订货，甲方不承担本协议的义务。

Should Party B fail to pass on his orders to Party A in a period of_________months for a minimum of_________， Party A shall not bind himself to this Agreement.

（3）对双方政府间的贸易，甲方有权按其政府的授权进行有关的直接贸易，而不受本协议约束。乙方不得干涉此种直接贸易，也无权向甲方提出任何补偿或佣金要求。

For any business transacted between governments of both Parties， Party A may handle such direct dealings as authorized by Party As government without binding himself to this Agreement. Party B shall not interfere in such direct dealings nor shall Party B bring forward any demand for compensation therefrom.

（4）本协议受签约双方所签订的销售确认条款的制约。

This Agreement shall be subject to the terms and conditions in the Sales Confirmation signed by both parties hereto.

本协议于_________年_________月_________日在_________签订，正本两份，甲乙双方各执一份。

This Agreement is signed on_________at_________and is in two originals；each Party holds one.

甲方（签字）：_________ 乙方（签字）：_________

Party A(Signature):_________ Party B(Signature):_________

对外贸易合同范本

contract

对外贸易合同范本

no.:

date:

the buyers:

address :

tel: fax:

买方：

地址：

the sellers:

address:

tel: fax:

this contract is made by and between the buyers and the sellers, whereby the buyers agree to buy and the sellers agree to sell the under mentioned commodity according to the terms and conditions stipulated below:

买方与卖方就以下条款达成协议：

1. commodity:

item no.

description

名称及规格

unit

单位

qty

数量

unit price

单价

amount

总价

cip xi’an airport

total value cip xi’an airport usd

say u.s. dollars only.

2. country and manufacturers:

原产国及造商：

3. packing:制

to be packed in standard airway packing. the sellers shall be liable for any damage of the commodity and expenses incurred on account of improper packing and for any rust attributable to inadequate or improper protective measures taken by the sellers in regard to the packing.

包装：标准空运包装。如果由于不适当的包装而导致的货物损坏和由此产生的费用，卖方应对此负完全的责任。

4. shipping mark:

the sellers shall mark on each package with fadeless paint the package number, gross weight, net weight, measurement and the wordings: "keep away from moisture" "handle with care" "this side up" etc. and the shipping mark:

唛头：卖方应用不褪色的颜料在每个箱子外部

刷上箱号、毛重、净重、尺寸，并注明“防潮”、

“小心轻放”、“此面向上”等，唛头为:

5. time of shipment(装运期)：within days after receipt of l/c

6. port of shipment(装运港)：

7. port of destination(目的港)： , china

8. insurance(保险)：to be covered by sellers for 110% invoice value against all risks.

9. payment(付款方式)the buyer open an irrevocable 100% l/c at sight in favor of seller

信用证付款：买方给卖方开出100%不可撤销即期信用证。

银行资料：

10. documents:

1. full set of air waybill in original showing “freight prepaid” and consigned to applicant. 空运提单一套

2. invoice in three copies. 发票一式叁份

3. packing list in three copies issued by the sellers. 装箱单一式叁份

4. certificate of quality issued by the sellers. 制造厂家出具的质量证明书

5. insurance policy. 保险单一份

6. certificate of origin issued by the sellers. 原产地证书

7. manufacturer’s certified copy of fax dispatched to the applicant within 24 hours after shipment advising

flight no., b/l no., shipment date, quantity, gross weight, net weight, and value of shipment.

制造厂家通知开证申请人有关货物装运的详细资料传真复印件壹份

8. the seller’s certificate and waybill certifying that extra documents have been dispatched according

to the contract terms by express airmail.

卖方有关另外用特快邮寄壹套单据给开证申请人的证明书及邮寄底单.

9. certificate of no wooden packing or certificate of fumigation.非木包装声明或熏蒸证.

in addition, the sellers shall, within three days after shipment, send by express airmail one extra sets of

the aforesaid documents directly to the buyers.

另外，卖方应于货物发运后三天内，用特快专递寄送一套上述的单据给买方。

11. shipment:

the sellers shall ship the goods within the shipment time from the port of shipment to the destination. transshipment is allowed. partial shipment is not allowed.

运输：卖方应于交货期内将合同货物从装货港运到目的港，不许分批，允许转运。

12. shipping advice:

the sellers shall, immediately upon the completion of the loading of the goods, advise by fax the buyers of the contract no., commodity, quantity, invoiced value, gross weight, name of vessel and date of delivery etc. in case due to the sellers not having faxed in time, all losses caused shall be borne by the sellers.

装运通知：卖方应于装货后，立即用传真将有关合同号、货物、数量、发票价值、毛重、运输工具名称、交货日期、货物预计抵达日等资料通知买方。如果由于卖方未能通知买方而造成的所有损失均由卖方承担。

13. guarantee of quality:

the sellers guarantee that the commodity hereof is made of the best materials with first class workmanship, brand new and unused, and complies in all respects with the quality and specification stipulated in this contract. the guarantee period shall be 12 months counting from the date of signing the acceptance report of this machine at the end-users site.

质量保证：卖方保证合同货物采用最好的材料、精湛的做工、全新、未使用过、质量和技术规格均符合合同的要求。质保期为最终用户签定验收报告后12个月内。

14. claims:

within 90 days after the arrival of the goods at destination, should the quality, specification, or quantity be found in unconformity with the stipulations of the contract except those claims for which the insurance company or not the owners of the vessel are liable, the buyers shall, on the strength of the inspection certificate issued by the state administration for entry-exit inspection and quarantine of p.r.c. or the site inspection report issued by the seller’s engineer, have the right to claim for replacement with new goods, or for compensation, and all expenses (such as inspection charges, freight for returning the goods and for sending the replacement, insurance premium, storage and loading and unloading charges etc.) shall be borne by the sellers. as regards quality, the sellers shall guarantee that if within 12 months from the date of signing the acceptance report of this machine, damages occur in the course of operation by reason of inferior quality, bad workmanship or the use of inferior materials, the buyers shall immediately notify the sellers in writing and put forward a claim supported by inspection certificate issued by the state administration for entry-exit inspection and quarantine of p.r.c. .the certificate so issued shall be accepted as the base of a claim. the sellers, in accordance with the buyers claim shall be responsible for the immediate elimination of the defect(s), complete or partial replacement of the commodity or shall devaluate the commodity according to the state of defect(s), . if the sellers fail to answer the buyers within one month after receipt of the aforesaid claim, the claim shall be reckoned as having been accepted by the sellers.

索赔：货物抵达目的地后90天内，如果质量、技术规格或数量发现与合同的规定不符(除过保险公司和运输公司的责任所负)，买方应该依据中华人民共和国出入境检验检疫局的检验报告或者是卖方的调试人员在安装调试时出具的报告，有权要求替换或补偿，所有的费用(包括商检费、替补件来回的运费、保险费、仓储费、货物装货卸货费等)均由卖方承担。卖方的质量保证为签定关于此批货物的验收报告后12个月内;由于货物内在的质量、差的做工、选材不当而造成操作中的货物损坏，买方应立即书面通知卖方，并同时随附中国商检局出具的检验报告作为索赔依据。卖方在接到买方的索赔后，有责任立即解决相应的质量问题、全部或部分地替换货物或根据货物损坏的程度进行折价; 如果卖方在收到买方的上述索赔后一个月内未能作出答复，则视为索赔已为卖方所接受。

15. force majeure:

the sellers shall not be held responsible for the delay in shipment or non-delivery of the goods due to force majeure, which might occur during the process of manufacturing or in the course of loading or transit. the sellers shall advise the buyers immediately of the occurrence mentioned above and within fourteen days thereafter, the sellers shall send by airmail to the buyers for their acceptance a certificate of the accident issued by the competent government authorities where the accident occurs as evidence thereof. under such circumstances the sellers, however, are still under the obligation to take all necessary measures to hasten the delivery of the goods. in case the accident lasts for more than 10 weeks, the buyers shall have the right to cancel the contract.

不可抗力：对于制造或装船运输过程中可能产生的不可抗力而造成的迟交货或不能交货，卖方可以不承担责任。卖方应立即在不可抗力产生的十四日内将有关情况通知买方，并且卖方应用航空邮件将有关政府当局部门出具的证明不可抗力产生的文件寄送给买方。在此情况下，卖方仍应尽最大努力采取各种措施促使货物的发运。如果事故持续十周，买方有权取消该合同。

16. late delivery and penalty:

should the sellers fail to make delivery on time as stipulated in the contract, with exception of force majeure causes specified in clause 15 of this contract. the buyers shall agree to postpone the delivery on condition that the sellers agree to pay a penalty which shall be deducted by the paying bank from the payment. the penalty, however, shall not exceed 5% of the total value of the goods involved in the late delivery. the rate of penalty is charged at 0.5% for every seven days. odd days less than seven days should be counted as seven days. in case the sellers fail to make delivery ten weeks later than the time of shipment stipulated in the contract, the buyers shall have the right to cancel the contract and the sellers, in spite the cancellation, shall still pay the aforesaid penalty to the buyers without delay.

迟交货和罚金：如果卖方未能按合同规定及时交货(除了本合同15条款所言的不可抗力)，买方同意在卖方付罚金的前提下迟交货。罚金的金额不超过迟交货的合同货物部分的价值的5%，罚金按每7日0.5%计算，少于7日的增加天数按7日计。如果卖方未能于合同规定的交货期之后的十周内发运，买方有权取消该合同，除此之外，卖方仍要将有关罚金不加拖延地付给买方。

17. arbitration:

any dispute arising from or in connection with this contract shall be submitted to china international economic and trade arbitration commission for arbitration which shall be conducted in accordance with the commissions arbitration rules in effect at the time of applying for arbitration. the arbitral award is final and binding upon both partied. arbitration fee shall be borne by the losing party.

仲裁：与此合同有关的争议应通过友好协商解决。如果协商无法解决，提交中国国际经济贸易仲裁委员会进行仲裁。按照申请仲裁时该会现行有效的仲裁规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。仲裁费用由败诉方承担。

18.bank charges: all bank charges outside china will be on the account of the sellers.

银行费用：所有中国之外的银行费用均由卖方承担。

19.other: this contract signed in three copies, the seller holds one copy and the buyer hold two copies.

其它：本合同一式叁份，卖方执壹份, 买方执贰份。

the buyers the sellers

贸易合同:出口代理协议

协议编号：

签约时间：

签约地点：

甲方：????????????????? (委托方)

地址：

电话：????????? 传真：?????邮编：

电子信箱：

乙方：                              ??(受托方)

地址：

电话：????????? 传真：????  邮编：

电子信箱：

甲、乙双方本着互惠互利、共同开拓出口渠道、在营销上发挥各自优势的原则，就甲方委托乙方出口其产品给甲方指定的境外客户(以下简称“外商”)一事，经友好协商达成一致，兹同意按照下述条款签订本协议书：

一、总??则

本协议为建立甲、乙双方间法律关系的总协议，甲、乙双方将就每一批实际出口的货物签订具体的《收购合同》;双方所签订的每一份《收购合同》均自动受本协议约束，如有冲突，以本协议规定的为准。

二、代理事项

1、甲方委托乙方代理出口其产品, 有关产品的具体数量、质量、规格、价格、付款方式、交货期、目的港和保险等条件,由甲方与外商自行协定并且直接对外商负责。因出口货物的质量、数量、包装、交货期等问题而引起的责任和损失均由甲方负责，乙方不承担任何责任。

2、甲方负责根据其与外商商定的交货期安排生产，并于货物报关出口前三个工作日向乙方提供真实、准确的出口产品的品名、规格、数量、金额、装箱情况等资料，并提供《商检换证凭单》，以便乙方按此资料向海关申报及履行相关手续。若因甲方所提供的材料与实际出口货物情况不符，而造成海关扣柜或处罚时，由此造成的延误船期和延期交货的责任和损失由甲方承担，甲方应赔偿乙方因此而遭受的海关处罚及其带来相应损失。如有其他特殊情况，由甲乙双方共同协商处理，承担各自责任及费用。

3、甲方负责安排远洋运输(费用由甲方承担)租船订仓事宜，并及时将船公司提柜纸传真给乙方，并告知该船的截关日期;乙方负责根据甲方提柜纸安排提柜和由甲方工厂至深圳码头的拖车，并承担此段的拖车费用;乙方负责向海关申报货物出口，并办理有关出口报关的一切手续，并承担相应的报关费用及其他相关费用。乙方负责在出口货物装柜后按照实际装柜情况填制《收购合同》，并由甲乙双方签字确认后盖章生效。

4、乙方在收到甲方提供的装箱资料后，应及时对甲方的出口业务免费制作全套单证。并安排报关出口。若非客观原因造成出口耽误而引起客户索赔，乙方应负责由此而发生的一切衍生之费用。

三、退??税

1、退税由乙方办理。

2、甲方应在货物出口报关后三日内向乙方交付涵盖相关《收购合同》项下全部货物的、合法有效的增值发票及《税收(出口专用)缴款书》。在此之前，乙方无义务向甲方支付相关《收购合同》中规定的税款。如甲方在货物出口报关后三十日内未能将上述票据交付给乙方，或甲方所交付的票据未能通过退税主管机关的审查，则甲方无权依据《收购合同》要求乙方支付《收购合同》规定的税款;乙方已经向甲方支付税款的，甲方应予退回。

四、支付方式：

1、定金支付方式：

(1)乙方在收到外商支付的定金后三个工作日内，将相应外汇款项按照?????? 的汇率折算成人民币支付给甲方。或

(2)乙方在收到外商开出的、以乙方为收益人并为乙方所接受的?

信用证后三个工作日内，将所收到信用证金额的??%按照????的汇率折算成人民币支付给甲方。或

(3)乙方在相关《收购合同》生效后三个工作日内，将《收购合同》项下货款总额的??%支付给甲方作为定金。

2、余款支付方式：

(1)甲方负责催促外商在货物出口报关后??日内将该批出口货物的全额外汇货款付到乙方帐户;乙方收到该笔外汇货款后，在三个工作日内按照《收购合同》的金额扣除乙方按照本协议本条第1款中已向甲方支付的货款后，并扣除??%的手续费，将余款支付给甲方。或

(2)乙方在货物出口报关并收到甲方所提供的涵盖相关《收购合同》项下全部货物的、合法有效的增值发票及《税收(出口专用)缴款书》后三个工作日内，按照《收购合同》的金额扣除乙方按照本协议本条第1款中已向甲方支付的货款后，并扣除??%的手续费，将余款支付给甲方。

(3)乙方在外商开出的远期信用证得到开证行承兑后三个工作日内，《收购合同》的金额扣除乙方按照本协议本条第1款中已向甲方支付的货款后，并扣除??%的手续费，将余款支付给甲方。

共2页，当前第1页12

甲方：

乙方：

经双方友好协商，谨就双方合作推广甲方之产品出口达成如下一致协议：

乙方在全球最大搜索引擎google上以包月形式为甲方专门购买以下英文关键词的全球排名，并直接链接甲方在乙方发布的信息上(该信息内将出现甲方网站的链接)，以所有语言在全球所有国家进行推广宣传，语言、国家也可由甲方选择并随时调整；

甲方希望在google上购买的一套英文产品关键词：

1，

2，

3，

4，

5，

6，

7，

8，

。。。。。。

特别赠送：如甲方购买超过3套英文（或中文）产品关键词,乙方免费在百度、搜狐、新浪上为甲方购买以下中文产品关键词的竟价排名，确保排名靠前，时间不低于半年，并直接链接甲方发布的信息。

1，

2，

3，

注： 1,乙方承诺上述关键词甲方可以随时提出互换、修改或调整。

2,乙方承诺如果你发现你的广告在google上未时时显示，或排名未在前8位，你发现一次，经本网核实无误，本网即多送1个月的推广

本协议的有效期为一年，从20__年 月 日起算，未尽事宜，双方另行协商。

甲方：

乙方：

开户行：

收款人：

日期：

合同编号：京典B_______号

甲方：____________________有限公司（以下简称甲方）

乙方：____________XX公司（以下简称乙方）

经甲乙双方协商就____________产品申报保健食品相关事宜达成如下合同 ：

一、双方约定

1.甲方同意将____________产品的申报工作全权委托____________医药科技有限公司办理。

2.在申报过程中双方相互协商、相互协助。

3.乙方为甲方保守秘密，不得将配方、工艺、质量标准等甲方所提供的资料泄露他人。

4.在申报期间若实验费、评审费、申报流程及要求等因政策调整，按新政策执行，双方不负任何责任。

二、双方责任

1.甲方向乙方提供申报产品的相关资料（产品配方、详细工艺、原料来源及检测报告等相关资料）。

2.甲方需向乙方提供送检必备资料（产品配方、详细工艺、规格及服用方法、申报企业相关信息和送检样品等），乙方方可安排送检工作。

3.甲方向乙方提供代理费共计人民币____________万元。

4.乙方负责____________的产品申报、资料整理、相关咨询等全部申报工作。

5.自合同生效日起至____________个月内完成申报前的准备工作，并报药监局终审。

6.药监局受理后____________个月内取得保健食品批准证书。

7.如在实验期内发现产品本身存在问题，乙方应及时通知甲方，讨论解决办法，如需重做实验，其费用将由甲方承担。

三、经费支付方式

1.自合同生效日起3日内，甲方向乙方支付代理费共计人民币____________万元。

2.取得药监局受理通知书后3日内，甲方将评审费汇至评审_____通知书上指定的帐号。同时向乙方支付代理费共计人民币_____万元。

3.取得药监局颁发的保健食品批准证书后3日内，甲方向乙方支付代理费共计人民币____________万元。

4.乙方以书面形式通知甲方，甲方取得通知后3日内，直接向检测机构或相关机构支付实验费或加工费等，乙方并向相关机构索取发票提供给甲方。

5.乙方在确定收到甲方所汇每笔代理费用后出具相应数额收据。

四、违约及其它

1.如因乙方责任致使实验终止或申报失败，乙方将退还甲方所支付的代理费用。

2.如因乙方原因致使甲方申报资料失秘，乙方将支付甲方违约金____________万元整人民币。

3.如甲方延迟支付本合同规定的各项款项，将按每日千分之叁（3‰）违约金支付给乙方，若超过30日以上乙方有权终止合同，甲方必须在3日内补足实验费和代理费。

4.如甲方延迟支付产品加工费、实验费及评审费等申报产品的所需费用，产品申报周期将按延迟到款周期续延，乙方不付任何责任。

5.如因乙方原因导致申报延期，将按每日千分之叁（3‰）违约金支付给甲方，如超过30日以上甲方将有权终止合同，并要求乙方退还甲方所支付的费用。

6.政策的改变或不可抗原因致使申报受阻或申报失败，甲乙双方都不承担责任，应视具体情况协商解决。

五、本合同一式两份，甲乙双方各执一份。

甲方单位盖章：____________ 乙方单位盖章：____________

甲方代表人签章：__________ 乙方代表人签章：__________

________年______月______日 ________年______月______日

甲方：_______

乙方：_______

根据《中华人民共和国民法典》及有关规定，经双方友好协商，达成一致意见，签订本合同。

一、甲方委托乙方制作服装系列产品，具体规格型号、数量、单价及价格详见附后清单。

二、产品质量标准、特殊工艺要求及费用负担：_______。

三、交货时间及方法：乙方收到甲方预付款_______个工作日内交货，送达方式另行协商确定，交货时由甲方确认，并在乙方的送货单上签字。

四、验收标准及期限：甲方自收货日内按样衣标准进行验收。如有质量问题，应在此间提出，逾期由甲方自行承担。

五、包装要求及费用负担：_______

六、交货方式地点：_______

七、交付定金预付款数额及时间：_______

八、结算方式及期限：甲方自收货日内以现金或转帐的方式付清货款。

九、服务承诺：

1、产品交付使用一月内，如因乙方原因出现的产品质量问题，乙方负责调换、修改，费用由乙方负担。

2、本次批量生产之后，如甲方提出增补制作要求，在布料规格质量及价格与本次产品相同的基础上，乙方依样衣标准制作，经双方协商另签订合同。

十、违约责任：

1、乙方加工生产以甲方确认的样衣为准，中途如因甲方原因提出更换布料及款式、色彩等，由此产生

的责任及费用由甲方承担并相应延长交货日期。甲方未按约定支付预付款，乙方可以不予制作并相应延长交货期限，直至甲方交付预付款后，按合同相应要求开始制作;甲方未按约定时间交付货款，甲方应按欠交货款的5%/月利率向乙方交纳违约金。

2、中途如因乙方原因提出的需要更换布料及款式、色彩等需征得甲方同意，否则由此产生的的责任及费用由乙方承担，如需延长交货日期，由双方另行协商。

十一、由于不可抗力灾害和确非一方本身的原因而不能履行合同时，可以免除违约责任。

十二、其他未尽事宜，甲乙双方协商解决。

十三、本合同一式二份，双方各执一份，自双方签字之日生效。交易完毕本合同自行作废。

甲方：_______乙方：_______

法定代表人：_______法定代表人：_______

委托代理人：_______委托代理人：_______

联系地址：_______联系地址：_______

联系电话：_______联系电话：_______

开户行：_______开户行：_______

帐号：_______帐号：_______

签订时间：_____年_____月_____日签订时间：_____年_____月_____日

附：委托制作服装系列产品规格型号、数量、价格等明细清单

人员类别规格型号

数量

单位

单价

计价

备注

合计人民币金额万仟佰拾元角分

此清单与合同一并生效。

甲方：_______乙方：_______

代表：_______代表：_______

_____年_____月_____日_____年_____月_____日

外贸实习报告

在大三的学习生活中，实习是不可缺少的一部分。在实习期间可以把在学校学到的外贸知识应用到实际当中。在理论与实践相结合的时候，能够更快更好的体会到理论的精髓所在，体会到理论与实践的区别。从而巩固自己所学的知识，增强发现问题、分析问题、解决问题的能力。从而做到理论与实际的融会贯通。

2008年元旦，正式开始了我梦寐以求的实习生活。在老师的引荐下，我来到了青岛*公司实习。这是一家专门出口针织品的外贸公司，成立于2007年，由最初简单的针织服装发展到现在的浴巾、毛巾、婴儿爬服、内衣等多种产品为一体的产品模式，客户也由最初的单一客户发展成现在遍布法国、日本、克罗地亚、意大利等欧、亚国家的客户规模。公司成立时间虽然很短，但不论是从产品生产的规模还是从客户数量上来看，公司都有着突飞猛进的进步。我虽然来公司的时间不长，但是在公司领导的领导下和同事的感染下，自己对工作都始终抱着极大的热情，深深的体会到自己责任的重大。在自己积极投入工作的过程中，不管是为人处事方面，还是工作方面，自己都是受益匪浅！

我所实习的这家公司是一家小公司，员工不超过20个人。麻雀虽小，可是五脏俱全。公司员工各司其职，竭尽全力为公司效力。现在回想一下，我还是很庆幸自己在一家小公司实习的。因为在小公司我才能做更多的工作，承担更多的责任，才能更好的锻炼自己的能力学到更多的东西。

我和师傅主要负责法国客户。这个法国公司比较大，经营产品的种类很多，包括针织服装、梭织服装、珠宝。青岛代表处主要负责服装的采购，我们和客人主要在针织服装这方面有合作。在我们正式合作以前，会就付款方式、贸易术语、违约等各个方面的条款先签订一份协议。在以后的合作中，我们只需对产品报价，只要我们的价格与客人的目标价相近，就可以接到客人的订单（PO）所以对于这个客人来说，对于客人每一季产品的报价是至关重要的。客人会在新一季开始的时候陆续通过邮件发来几十个款的报价，同时会通知我们到客人的办公室去拿用在这几款衣服上特殊面料。这就意味着我们的报价不仅要低，还要找到这种面料，才可以拿到这份订单。由于今年汇率变化很多，而且汇率不断的降低，同时国内也存在通货膨胀。用句通俗的话来形容现在的形式，就是人民币在国内不值钱，在国外很值钱。这就给我们报价加大了难度，如果汇率估算错误，就会带来损失。

订单确定以后，我们就会与工厂联系，给工厂下订单、签订国内的购货合同。接下来就会提供色样、布样、产前样、确认样等样品。很多样品都要经过一次次的修改才能满足客人的要求。每一次提供样品以前都要认真体会客人关于样品的要求，这样才能保证样品一次通过。收到样品意见以后要准确无误的翻译并且传达给工厂。有时会因为错误理解客人的意见，错误的传达给工厂，都会给工厂和自己造成很大的损失。

这个客户的交货时间很分散，几乎每个周都会出货。我每周四都会为了报关辗转于工厂，货代，场站之间，也是我最忙的时候，恰恰也是我学到东西最多的时候。记得有一个周我们出了两个大柜的货。这些衣服并不是一个款式，有婴儿的，有大童的，还有女大人的。海关对于不同的服装种类有不同的监管要求，所以这些衣服一共要申请7个出口许可证。每周四上午是报关时间，为了保证货物顺利通关，我周三就早早的把报关所需的箱单、发票、合同都做好了，也通知报关行过来取单据。本来以为这次可以很顺利的报关。可是报关行收到单据没多久就打电话告诉我一票报关单里只能包含一个许可证。没有办法我又急急忙忙把单据一式七份。可刚刚把修改后的单据传给报关行，他又打电话告诉我说，许可证上的价格是最低限价，发票和合同上的价格必须低于许可证上的价格。我当时一听就有点慌，货代要求我们必须周四报上关，否则就给我们甩货。没办法我又急匆匆的该好价格，还好这次没有什么问题顺利通关了。这个周四过的是我实习生活中最最紧张的一个了。但是我也从中吸取了很多教训，也学到了很多知识。首先，一个报关单只能包含一个出口许可证。其次，出口许可证的价格是最低限价，发票和合同的价格不能低于出口许可证的价格。因为我们和客人签订合同的价格包含客人的佣金，所以我们在保管的时候就会把这部分佣金扣除。但是我们在申请出口许可证的时候是用含佣价申请的。既然出口许可证是最低限价，以后自己再申请出口许可证的时候就应该注意这个问题，给自己减少不必要的麻烦。俗话说吃一堑长一智，经过这次，自己以后要学的更加仔细更加认真。如果遇到不确定的问题，一定要提前咨询有关部门，给公司减少不必要的花费，给自己减少不必要的麻烦。再次，粗心和浮躁在工作中都是要不得的，自己一个小小的失误有时会造成客户的索赔，有时造成单证不符，导致已经报上关的货物删单。看似不经意的马虎，造成的后果都是严重的。虽然在学校里已经学了很多关于报关和制单的知识，但是真正应用起来发现自己学到的知识和实际应用有很大的差别。在公司里虽然有的人学历没有自己高，但是也不应该轻视他们，他们的经验是我们多少年的学校生活所学不到的。时时刻刻都应该保持谦虚谨慎的态度。

作为公司的新人，出差是让我最兴奋的事情。在我看来，出差是一件很好的差事，既可以到外面欣赏风景，见到很多平时都不曾见过的新鲜事物，又可以不用整天闷在办公室里。所以一有出差的机会，我就会特别高兴。出了几次差以后发现事实并非如此。我们出差主要是带着客人的验货员到工厂验货，验货的结果如何直接关系到我们能不能按时出货。碰到没有问题的货还好说，可是有时候工厂的货做的很急，就会出现油污、断线、忘记缝洗标的问题，这些问题都还是小问题，让工厂的师傅修补一下就可以出货了。可是有的工厂大货生产时擅自更改扣子的颜色或者领子的颜色，即使他们这样做是为了衣服的美观，是出于好意，可是并没有经过客人的确认也是不允许的，是要遭到客人索赔的。出现这种严重的情况，让工厂重新修改是不可能的。这就要靠我们对衣服的生产和质量了如指掌，能够当场作出判断这样的货出口以后不会遭到索赔。在以后的出差中我也不敢再抱着出去玩玩的心态了，在客人验货的时候我也会在旁边认真的看着。看客人是怎样验货，主要检查衣服的哪些方面，认真的记在心里，在检查工厂送来的样品是也注重看这些方面，确保每一次出货都万无一失。师傅带我验过几次货，我了解了大体流程以后，现在就是我自己带着客人验货了。得到了师傅的认可，肩负起这么重要的责任让我十分兴奋。有一次我自己带着客人验货就出现过一次状况。那次我带客人去验一批小童的T恤，衣服后面的领开口处扣子的定位需要用消失笔，这个消失笔的笔迹在7天以后就会消失。可是由于这批货赶得太急，我们验货的时候才过了一天，消失笔的笔迹自然不会消失。当时验货员就问我怎么这里还有消失笔的笔迹呢？我从来都没有听说过消失笔，对于这个问题我也无从下手去回答。只好把那几件带着消失笔笔迹的衣服甩掉了。我回公司问了师傅才知道消失笔笔迹会在7天之后就自动消失。如果我早知道这个问题的话，就不会出现这种问题了。为了防止以后在出现这种问题，自己也在不断的积累关于服装的知识。

五个月的实习生活，看似很长，可是一眨眼的功夫就过去了。从刚开始的不谙世事，到现在的得心应手。刚入公司，一切都显得那么陌生，做什么事情心里都没有底气，不能放开去做。有很多新的东西需要自己去学习和适应。现在想想人在社会上就是需要适应不断的变化，适者生存，自己只有去适应社会，社会却不会去适应你。只有适应了这种高节奏的生活才能做出效率，作出成绩。作为公司肯定不会需要一个不会创造效益的人。经过几个月的磨练和适应，现在的我对工作已经得心应手。每天都会实现安排好当天的工作，把工作按照轻重缓急分配好，能把一天的工作完美的结束就是我这一天最大的成功了。完美的结束一天的工作只是我现在的目标，以后我会给自己树立更高的目标，只有在不断追求完美的过程中，自己才能变得更加完美。

共2页，当前第1页12

对外贸易合同范本

合同号 Contract No:_______

签字日期 Signing Date ______

卖方__________________________________________

The Seller :

买方__________________________________________

The Buyer :

双方同意按下列条款由卖方出售，买方购进下列货物：

The Seller agrees to sell and the Buyer agrees to buy the undermentioned goods on the terms conditions below:

(1)货物名称及规格 Description of Commodity， Specifications

(2)数量 Quantity

卖方有权在 _____% 以内多装或少装

shipment ______% more or less at sellers option

(3)单价 Unit price

(4)总价 Total Amount

(5)包装：Packing Term ：

(6)唛头： Shipping Marks ：

(7)装运口岸： Port of Loading ： China Ports

(8)目的口岸： Port of Destination。

(9)装运期限： Time of Shipment：

(10)保险：由卖方按发票金额110%投保。

Insurance： To be effected by the Seller for 110%of invoice value covering。

(11)商品检验：Inspection：

(12)付款条件：买方应通过买卖双方同意的银行，开立以卖方为受益人的、不可撤销的、不可转让和不可分割的、允许分批装运和转船的即期信用证。该信用证凭装运单据在中国的中国银行见单议付。该信用证必须在______年___月___日前开到卖方。信用证有效期为装船后_____天在中国到期。

Terms of Payment :

The Buyer shall open， With a bank to be accepted by both the Buyer and the Seller， an irrevocable，intransferable and indivisible Letter of Credit at sight， allowing partial shipments and transshipment， in favor of the seller and negotiable against first presentation of the shipping documents to the Bank of China in China. The covering Letter of Credit must be opened and reached to the Seller before and to remain valid in

n China until the _____day(inclusive) from the date of Shipment。

(13)单据：卖方应向议付银行提供已装船清洁提单(或集装箱运输的己装船提单)、发票、品质证明、数量/重量鉴定书;如果本合同按CIF条件，应再提供可转让的保险单或保险凭证。

Documents： The Seller shall present to the negotiating bank， Clean On Board Bill of Lading (or Clean On Board Bill of Lading for container transportation)， Invoice， Quality Certificate， Survey Report on Quantity/Weight， and Transferable insurance Policy or insurance Certificate when this Contract is made on CIF basis。

(14)装运条件： (CIF/CFR)

1.载运船只由卖方安排，允许分批装运，允许转船、允许集装箱运输。

2.卖方于货物装船后，应将合同号码、品名、数量、船名、装船日期以电报通知买方。

Terms of Shipment ： (CIF/CFR)

1. The carrying vessel shall be provided by the seller. partial Shipments transshipment and containers transportation are allowed。

2. After loading is completed the Seller shall notify the Buyer by cable of the contract number . description of commodity ， quantity， name of the carrying vessel and date of shipment。

(15)品质与数量、重量的异议与索赔：货到目的口岸后，买方如发现货物品质及/或数量/重量与合同规定不符，除属于保险公司及/或船公司的责任外，买方可以凭双方同意的检验机构出具的检验证明向卖方提出异议，品质异议须于货到目的口岸之日起30天内提出，数量/重量异议须于货到目的口岸之日15天内提出。卖方应于收到异议后30天内答复买方。

Quality/Quantity/Weight Discrepancy and Claim ：

In case the quality and/or quantity/weight are found by the Buyer to be not in conformity with the Contract after arrival of the goods at the port of destination， the Buyer may lodge claim with the seller supported by survey report issued by an inspection organization agreed upon by both parties，with the exception ，however of those claims for which the insurance company and/or the Shipping company are to be held responsible Claim for quality discrepancy should be filed by the Buyer within 30 days after arrival of the goods at the port of destination?while for quantity/weight discrepancy claim should be filed by the Buyer within l5 days after arrival of the port of destination . The Seller shall within 30 days after receipt of the claim， send reply to the Buyer.

(16)不可抗力：由于人力不可抗拒的事故，使卖方不能在本合同规定期限内交货或者不能交贷，卖方不负责任。但卖方必须立即以电报通知买方，如买方提出要求，卖方应以挂号函向买方提供由中国国际贸易促进委员会或有关机构出具的发生事故的证明文件。

Force Majeure ： In case of Force Majelure， the Seller shall not be held responsible for late delivery or non-delivery of the goods but shall notify the Buyer by cable，The seller shall deliver to the Buyer by registered mail ， if so requested by the Buyer， a certificate issued by the China Council for the Promotion of International Trade or any competent authorities。

(17)仲裁: 凡因执行本合同或与本合同有关事项发生的一切争执，应由双方以友好方式协商解决，如果不能取得协议时，则在被告国家根据被告国仲裁机构的仲裁程序规则进行仲裁，仲裁决定是终局的，对双方具有同等约束力。仲裁费用除非仲裁机构另有决定外，均由败诉一方负担。

Arbitration ： All disputes in connection with this Contract or the execution thereof shall be Settled through friendly negotiations between two parties if no settlement can be reached . the case in dispute shall then be submitted for arbitration in the country of defendant in accordance with the arbitration regulations of the arbitration organization of the defendant country， The decision made by the arbitration organization shall be taken as final and binding upon both parties. The arbitration expresses shall be borne by the losing party unless otherwise awarded by the arbitration organization。

(18)补充条款：

Additional clauses :

(19)其他

双方公司落款及签字(盖章)