0

技术咨询合同8篇 合同范本怎么写(精彩20篇)

房屋建筑修缮及装修老外施工合同范本-发包方

浏览

7832

范文

899

建设工程技术咨询合同

范文类型:合同协议,适用行业岗位:工程,技术,全文共 1425 字

+ 加入清单

乡村公路建设工程技术咨询合同

编号:________

甲方:

乙方:

日期:________

年________月

授权双方代表按下列条款签订本协议书:________

一、甲方请乙方就工程提供技术咨询服务,乙方愿意提供这样的服务。

二、乙方向甲方提供的技术咨询服务范围如下:________

1.坝基岩体稳定、变形及基础处理措施。

2.大坝下游的防洪防冲和岸坡保护问题。

3.库岸滑坡涌浪问题及岸坡变形观测技术。

三、乙方的责任如下:________

1.乙方应于________

年________月份内派遣3名身体健康、能够胜任工作的专家来中国进行25天的技术咨询服务,派出技术咨询专家的名单应事先征得甲方同意。

2.乙方专家应到现场考察,并正确、全面地解答甲方人员提出的咨询问题,在离开中国前,向甲方提出咨询报告初稿,并在离开中国后一个月内提出正式咨询报告一式五份,报告内容应包括附件一所列内容,并用英文书就。

3.乙方的专家在中国进行技术咨询服务的时间为二十五个日历日(包括四个旅途日和三个周末日),每周工作六天,每天工作八小时。

4.专家在中国工作期间应遵守中国的法律和工作地区的有关规定。

5.乙方将正式的技术咨询报告给甲方寄出后,应以电传通知甲方如下内容:________报告寄出日期、邮单号。

6.技术咨询报告如在邮寄途中丢失,乙方接到甲方通知后立即补寄。

四、甲方的责任范围:________

1.考虑到本协议第二、三条所规定的乙方所提供的咨询服务,甲方支付给乙方一笔总费用,其金额为________美元(大写________美元整)。

2.为乙方3名专家提供在中国境内食、宿及工作需要的交通。

3.提供工作必须的技术资料、图纸和技术文件。

4.提供在中国工作所需的翻译人员。

5.协助办理专家出入中国签证和在中国居留、旅行手续并提供方便。

五、费用的支付

1.本协议书的费用以美元支付。

2.本协议总金额25%,计________美元,在乙方派出的专家到北京后,甲方凭收到下列单据,经审核无误后3天内通过北京XX银行和__国商业银行向乙方支付。

A.____发展有限公司北京办事处出具的以甲方为受益人金额为协议总金额25%计(美元)不可撤销的保证函正副本各一份。

B.商业发票正本一份、复印本五份。

3.本协议总金额75%,计________美元在乙方完成技术咨询服务并提交正式的技术咨询报告后,甲方凭收到下列单据,经审核无误后不迟于天通过北京XX银行和__国商业银行向乙方支付。

A.商业发票正本一式六份。

B.即期汇票一式两份。

C.邮寄正式技术咨询报告的邮单或空运单一式两份。

六、凡在中国以外所发生的一切银行费用由乙方承担。

在中国发生的一切银行费用由甲方承担。

七、双方应对互相提供的一切资料给予保密,未经对方书面同意不得向第三者透露。

八、税费

1.中国政府根据现行税法对甲方课征有关执行本协议的一切税费,由甲方支付。

2.中国政府根据现行《中华人民共和国个人所得税法》对乙方课征有关执行本协议的一切税费由乙方支付。

3.中国境外课征有关执行本协议所发生的一切税费将由乙方支付。

九、甲方和乙方在执行协议中发生的一切争执应通过双方友好协商解决。

十、执行本协议的一切文件与资料应以英文书写并采用公制。

十一、本协议书经双方签字后需经中国政府批准才能生效。

本协议以英文写成一式两份,双方各执一份,具有同等效力。

十二、双方法定地址

甲方代表签字:________

签订日期:

乙方代表签字:________

签订日期

展开阅读全文

更多相似范文

篇1:技术转让合同范本[页6]_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 1241 字

+ 加入清单

技术转让合同范本

第十一章 税费

11.1 凡因履行本合同而引起的一切税费、发生在中国以外的应由乙方负责。

11.2 在执行合同期间,乙方在中国境内取得的收

入应按中国税法缴税。此税费由甲方在每次支付时扣交,并将税务局的收据副本一份交乙方。 第十二章 仲裁

12.1 凡因执行本合同而引起的一切争执,应由双方通过友好协商来解决。在不能解决时,则提交仲裁解决。

12.2 仲裁地点在中国北京,由中国国际经济贸易仲裁委员会按该会仲裁程序暂行进行仲裁。仲裁也可在瑞典的斯德哥尔摩进行,并由斯德哥尔摩商会仲裁院按仲裁院的程序进行仲裁。

12.3 仲裁裁决应是终局裁决,对双方均有约束力,双方都应遵照执行。

12.4 仲裁费应由败诉一方负担。

12.5 在仲裁过程中,本合同中除了接受仲裁的部分外,仍应由双方继续执行。 第十三章 不可抗力

13.1 若签约的任一方,由于战争及严重的火灾、水灾、台风和地震所引起的事件,影响了合同的执行时,则应延迟合同期限,延迟时间应相当于事故所影响的时间。

13.2 责任方应尽快地将发生的人力不可抗拒事故电告另一方,并在____天内以航空挂号将有关当局出具的证明文件提交另一方确认。

13.3 若人力不可抗拒事故延续到____天以上时,双方应通过友好协商尽快解决合同继续执行问题。 第十四章 合同生效及其它

14.1 合同在甲方和乙方代表签字之后,双方需向各自政府申请批准,并以最后批准一方的日期作为生效日。双方应尽最大的努力在____天期限内获得批准。并用电报通知对方,随之以信件予以确认。若合同签字后____个月内不能生效,则本合同对甲方和乙方都无约束力,经双方同意,申请批准的期限可以延长。

14.2 本合同用____文和中文书写各四份,____文文本和中文文本具有同等效力。双方执中、____文文本各二份。

14.3 本合同从合同生效之日起____年内有效。有效期满后,本合同即自动失效。除非在合同有效期内双方另有协议,第二阶段合同产品开始日期将由乙方来华指导时,双方签订备忘录予以确认。 14.3.1 合同期满前____个月之前的任何时候,甲方或乙方均可提出要求进行合同延期的谈判,届时签订合同延期的专门条款。

14.4 合同第一阶段在合同生效之日开始,合同第二阶段的开始日期预期为合同生效后的第____个月。 14.5 合同终止前,任何合同项下发生的未清理的赊欠和债务将不受合同终止的影响。合同的终止并不能解除债务赊欠一方对另一方债务。

14.6 本合同附件均为本合同不可分割的部分,与合同正文具有同等效力。

14.7 合同签字前双方之间的所有来往通讯文电,从合同生效之日起自动失效。

14.8 只有根据双方授权代表签字的书面文件才能对本合同进行更改和补充。这些文件将成为合同不可分割的部分。

14.9 双方为履行本合同而进行的通讯应以____国文书写一式二份。

共7页,当前第6页1234567

展开阅读全文

篇2:技术咨询服务契约协议

范文类型:合同协议,适用行业岗位:技术,服务,全文共 1633 字

+ 加入清单

中国 _______公司和 国 _______公司关于 工程技术咨询服务协议书

编号:_________

日期:_______年______月______日中国________(以下简称"甲方")为一方,________国 _______公司(以下简称"乙方")

为一方,双方就工程的技术咨询服务,授权双方代表按下列条款签订本协议书:_________

一、甲方请乙方就工程提供技术咨询服务,乙方愿意提供这样的服务。

二、乙方向甲方提供的技术咨询服务范围如下:_________

1.坝基岩体稳定、变形及基础处理措施。

2.大坝下游的防洪防冲和岸坡保护问题。

3.库岸滑坡涌浪问题及岸坡变形观测技术。

三、乙方的责任如下:

1.乙方应于 _______年______月份内派遣3名身体健康、能够胜任工作的专家来中国进行25天的技术咨询服务,派出技术咨询专家的名单应事先征得甲方同意。

2.乙方专家应到现场考察,并正确、全面地解答甲方人员提出的咨询问题,在离开中国前,向甲方提出咨询报告初稿,并在离开中国后一个月内提出正式咨询报告一式五份,报告内容应包括附件一所列内容,并用英文书就。

3.乙方的专家在中国进行技术咨询服务的时间为二十五个日历日(包括四个旅途日和三个周末日),每周工作六天,每天工作八小时。

4.专家在中国工作期间应遵守中国的法律和工作地区的有关规定。

5.乙方将正式的技术咨询报告给甲方寄出后,应以电传通知甲方如下内容:_________报告寄出日期、邮单号。

6.技术咨询报告如在邮寄途中丢失,乙方接到甲方通知后立即补寄。

四、甲方的责任范围:

1.考虑到本协议第二、三条所规定的乙方所提供的咨询服务,甲方支付给乙方一笔总费用,其金额为 美元(大写 美元整)。

2.为乙方3名专家提供在中国境内食、宿及工作需要的交通。

3.提供工作必须的技术资料、图纸和技术文件。

4.提供在中国工作所需的翻译人员。

5.协助办理专家出入中国签证和在中国居留、旅行手续并提供方便。

五、费用的支付

1.本协议书的费用以美元支付。

2.本协议总金额25%,计________美元,在乙方派出的专家到北京后,甲方凭收到下列单据,经审核无误后3天内通过北京XX银行和×国商业银行向乙方支付。

A. 发展有限公司北京办事处出具的以甲方为受益人金额为协议总金额25%计________(美元)不可撤销的保证函正副本各一份(保证函格式见本合同第二号附件)。

________商业发票正本一份、复印本五份。

3.本协议总金额75%,计________美元在乙方完成技术咨询服务并提交正式的技术咨询报告后,甲方凭收到下列单据,经审核无误后不迟于 天通过北京XX银行和×国商业银行向乙方支付。

A.商业发票正本一式六份。

________即期汇票一式两份。

________正式技术咨询报告的邮单或空运单一式两份。

六、凡在中国以外所发生的一切银行费用由乙方承担。在中国发生的一切银行费用由甲方承担。

七、双方应对互相提供的一切资料给予保密,未经对方书面同意不得向第三者透露。

八、税费

1.中国政府根据现行税法对甲方课征有关执行本协议的一切税费,由甲方支付。

2.中国政府根据现行《中华人民共和国个人所得税法》对乙方课征有关执行本协议的一切税费由乙方支付。

3.中国境外课征有关执行本协议所发生的一切税费将由乙方支付。

九、甲方和乙方在执行协议中发生的一切争执应通过双方友好协商解决。

十、执行本协议的一切文件与资料应以英文书写并采用公制。

十一、本协议书经双方签字后需经中国政府批准才能生效。本协议以英文写成一式两份,双方各执一份,具有同等效力。

十二、双方法定地址

中国 _______公司

地址:_________

电话:_________

国 _______公司

地址:_________

电传:_________

甲方代表签字:_________ 乙方代表签字:_________

中国 _______公司 ________国 _______公司

展开阅读全文

篇3:美容技术总监职责_合同范本

范文类型:制度与职责,合同协议,适用行业岗位:美容,技术,经理,全文共 866 字

+ 加入清单

美容技术总监职责

一、技术指导类

1、 向区域经理负责,对所在区域发型师、技师的技术进行全面指导。

2、 经常性巡查所在区域内的分店发型师的技术,每个店至少1次/月,并向区域经理汇报每次巡查情况,提交每次巡查的结果报告。

3、 为发型师解答在工作中遇到的技术难题,提供发型设计方面的咨询服务。

4、 详细了解所在区域发型师的技术水平,并定期作出评定,两个月/次/人。

5、 协助分店店长共同提高发型师的实际操作能力。

6、 帮助分店对发型技师的工作能力进行指导和训练。

二、培训考核类

1、 每个月底,将下一月的发型师技术提升方案和工作开展计划交区域经理审核。

2、 负责具体执行所在区域发型师的技术提升方案和岗位技术培训工作。

3、 负责区域内每个新入职发型师的技术考核和岗前培训工作。

4、 每月定期向区域经理汇报、总结各项技术培训及考核工作的进展情况。

5、 按照公司标准要求,定期考核所在区域发型师的技术能力,并上报管理中心和区域经理。

三、信息服务类

1、 每个季度发布最新的流行发型款式及季节性发型,并向发型师讲解实际操作过程中的处理技巧。

2、 经常性地向发型师提供新的技术和新的设计理念的培训信息及各类大型赛事信息。

3、 负责对所在区域的发型师进行新产品的功用,适合对象及操作技巧的讲解。

岗位职责:

1.负责中心整体技术平台搭建,技术方案筛选,制定符合本中心发展规划的具体技术发展路线和计划方案;

2.始终站在行业发展趋势前端,推进和提供适合本中心开展医疗美容项目的技术解决方法和手段;

3.组建和维护操作团队,制定各岗位的管理细则及工作流程,负责团队工作的开展及培训;

4.根据工作特点建立风险管理机制,制定应急措施,保障中心的各项医疗项目在安全性、可靠性和有效性基础上展开。

任职资格:

1.具有医疗管理、整形相关专业本科以上学历,具备各类微创美容仪器及产品的使用和理论知识;

2.从事过一线工作,具有较强的微创美容行业或岗位实际管理和操作经验;

3.具备丰富的团队建设、管理经验和良好的沟通技巧,有良好的培训口才;

4.具有海外同类机构同类岗位工作经验者优先。

展开阅读全文

篇4:技术咨询协议书

范文类型:合同协议,适用行业岗位:技术,全文共 371 字

+ 加入清单

签订地点:

签订日期:

项目名称:

委托人:

受托人:

有效期限: 年____月____日至 年____月____日

依据《民法典》的规定,合同双方经协商一致,签订本合同。

一、咨询的内容、形式和要求:

二、履行期限、地点和方式:

三、委托人的协作事项:

四、技术情报和资料的保密:

五、验收、评价方法:

六、报酬及其支付方式:

①一次总付:

②分期支付:

③ 其他方式:

七、违约金或者损失赔偿额的计算方法: 违反本合同约定,违约方应当按《民法典》第八百八十一条规定,承担违约责任。

八、合同争议的解决方式: 凡因本合同或与本合同有关的一切争议,由双方协商解决;协商不成的,提交中国国际经济贸易仲裁委员会在 仲裁,仲裁裁决是终局,对双方均有约束力。

九、其他(含中介人权利、义务、服务费及其支付方式等上述条款未尽事宜): 。

委托人(签章):

签订日期:

受托人(签章):

签订日期:

展开阅读全文

篇5:技术转让协议书范本

范文类型:合同协议,适用行业岗位:技术,全文共 2540 字

+ 加入清单

合同编号: 科技合字(19 )第 号

项目名称:____________________________

技术受让方: (公章)

(甲方)

技术转让方: (公章)

(乙方)

中 介 方: (公章)

合同登记机关: (公章)

签订日期: 年 月 日

合同

履行期限: 年 月 日至 年 月 日

┌──────────┬──────────────────────┐

│ 研制单位(个人) │ │

├──────────┼──────┬─────────┬─────┤

│研制完成时间 │ 年 月 日│ 主要研制人员 │ │

├──────────┼──────┼─────────┼─────┤

│专利申请号 │ │ 专利批准号 │ │

├──────────┼──────┼─────────┼─────┤

│专利申请时间 │ 年 月 日│ 专利批准时间 │年 月 日│

├──────────┼──────┴─────────┴─────┤

│专利权的有效期限 │ 年 月 日至 年 月 日 │

└──────────┴──────────────────────┘

一、发明创造名称和内容:

二、实施许可的范围、期限和方式:

三、技术情报和资料及其保密事项:

四、技术服务的内容:

五、履行合同的计划、进度、期限、地点和方式:

六、验收的标准和方法:

七、成交金额与付款时间、付款方式:

一次总付:

分次总付:

按利润或销售额提成 % 时间:

其它方式:

八、中介方的义务和责任及收取中介服务费比例和支付方式:

九、后续改进的提供与分享:

十、违约责任:

十一、争议的解决办法:

十二、名词和术语的解释:

┌─┬──────────┬───────┬────────────┐

│ │ │ 地 址 │ │

│技│ (公章) ├───────┼────────────┤

│术│ │ 电 话 │ │

│受│ ├───────┼────────────┤

│让│法定代表人: │ 帐 号 │ │

│方│ ├───────┼────────────┤

│ │ │ 开户银行 │ │

├─┼──────────┼───────┼────────────┤

│ │ │ 地 址 │ │

│技│ (公章) ├───────┼────────────┤

│术│ │ 电 话 │ │

│转│ ├───────┼────────────┤

│让│法定代表人: │ 帐 号 │ │

│方│ ├───────┼────────────┤

│ │ │ 开户银行 │ │

├─┼──────────┼───────┼────────────┤

│ │ │ 地 址 │ │

│中│ (公章) ├───────┼────────────┤

│ │ │ 电 话 │ │

│介│ ├───────┼────────────┤

│ │法定代表人: │ 帐 号 │ │

│方│ ├───────┼────────────┤

│ │ │ 开户银行 │ │

├─┼──────────┴───────┴────────────┤

│鉴│ 意见: │

│证│ 经办人: │

│单│ (公章) │

│位│ 年 月 日 │

├─┼───────────────────────────────┤

│公│ 意见: │

│证│ 经办人: │

│机│ (公章) │

│关│ 年 月 日 │

└─┴───────────────────────────────┘

〔说明〕

1.“合同类型”一项要写明专利实施许可合同,并注明是普通实施许可合同、排他实施许可合同或者独占实施许可合同。

普通实施许可合同是最常见的专利实施许可方式。指转让方许可受让方在一定范围内实施转让方所有或者持有的专利所订立的合同。

排他实施许可合同,是转让方和受让方约定分享专利实施权的协议。转让方不得在已许可受让方实施专利的范围内,就该项专利与第三方订立专利实施许可合同,但可以保留实施该项专利的权利。

独占实施许可合同,是转让方将专利实施权移交受让方所订立的协议。转让方不得在已许可受让方实施专利的范围内,就该项专利与第三方订立专利实施许可合同,自己也不得实施该项专利。

2.在“实施许可的范围、期限和方式”一项,如果转让方许可受让方向第三方分售专利实施许可时,应约定分售的条件及有关事项。没有约定时,应视为受让方在整个的专利权存续期间实施专利,不受地区和方式的限制,但不得与第三方订立专利实施许可合同。

3.“技术服务项目”一项,指转让方派出专业技术人员进行技术指导的项目、内容、工作期限和有关事项。

4.“后续改进的成果分享”一项应规定在合同成立以后,双方在原有专利基础上加以改进所完成的新的技术成果是否向对方提供,以及如何互惠使用。

展开阅读全文

篇6:涉外科技咨询和设计合同_合同范本

范文类型:合同协议,适用行业岗位:外科,设计,全文共 1730 字

+ 加入清单

外科咨询设计合同

涉外科技咨询和设计合同

中国_________公司和_________国_________公司

关于_________工程技术咨询服务协议书

中国公司(以下简称“甲方”)为一方,_________国_________公司(以下简称“乙方”)为一方,双方就工程的技术咨询服务,授权双方代表按下列条款签订本协议书:

(一)甲方请乙方就工程提供技术咨询服务,乙方愿意提供这样的服务。

(二)乙方向甲方提供的技术咨询服务范围如下:(详见附件)

(三)乙方的义务如下:

1.乙方应于?年?月份内派遣名身体健康、能够胜任工程咨询工作的专家来中国进行为期?天的技术咨询服务,派出技术咨询专家的名单应事先征得甲方同意。

2.乙方的专家应到现场考察,并正确、全面地解答甲方人员提出的咨询问题,在离开中国前,向甲方提交咨询报告初稿,并在离开中国后一个月内提交正式咨询报告,一式五份,报告的内容应包括附件中所列内容,并用英文书写。

3.乙方的专家在中国进行技术咨询服务的时间为?个日历日(包括?个旅途日和?个周末日),每周工作6天,每天工作8小时。

4.专家在中国工作期间应遵守中国的法律和所在工作地区的有关规定。

5.乙方将正式的技术咨询报告给甲方寄出后,应以电传通知甲方如下内容:报告寄出日期、邮单号。

(四)甲方的义务

1.考虑到本协议第二、三条所规定的乙方所提供的咨询服务,甲方支付给乙方一笔总费用,其金额为?美元(大写?美元整)。

2.为乙方专家提供在中国境内的食宿及工作需要的交通。

3.提供工作必须的技术资料、图纸和技术文件。

4.提供在中国工作所需的翻译人员。

5.协助办理专家出入中国的签证和在中国居留、旅行手续并提供方便。

(五)费用的支付

1.本协议书的费用以美元支付。

2.本协议书所规定的总金额的75%计美元,在乙方所派专家到达北京后,甲方凭收到的下列单据,经审核无误后3天内通过中国和_________国商业银行向乙方支付:

(1)商业发票正本一份;

(2)商业发票复印本五份。

3.本协议总金额的25%,计_________美元在乙方完成技术咨询服务并提交正式的技术咨询报告后,甲方凭收到的下列单据,经审核无误后不迟于?天通过中国和_________国商业银行向乙方支付:

(1)商业发票正本一式六份;

(2)即期汇票一式两份;

(3)邮寄正式技术咨询报告的邮单或空运单一式两份。

(六)凡在中国以外所发生的一切银行费用由乙方承担。在中国发生的一切银行费用由甲方承担。

(七)双方应对互相提供的一切资料给予保密,未经过对方书面同意不得向第三者透露。

(八)税费

1.中国根据现行税法对甲方课征有关执行本协议的一切税费,由甲方支付。

2.中国根据现行《中华人民共和国个人所科税法》对乙方课征有关执行本协议的一切税费由乙方支付。

3.在中国境外课征有关执行本协议所发生的一切税费由乙方支付。

(九)_____

1.执行本协议所发生的或与本协议有关的一切争议,双方应通过友好协商解决。如协商仍不能达成协议时,则应提交_____解决。

2._____在被诉方所在国进行。在中国,由中国国际经济贸易_____委员会按该会_____程序规则进行_____;在_________国,由(被诉方所在国的_____机构的名称)根据其_____程序规则进行_____。

3._____裁决是终局性的,对双方均有约束力。_____费用由败诉方负担。

4.除了在_____过程中进行_____的部分外,协议应继续执行。

(十)不可抗力

签约双方中的任何一方,由于战争、严重水灾、火灾、地震、内乱、封锁、政变等不可抗力事件而影响协议执行时,则经双方协商后本协议可以暂停履行。如乙方专家在这种情况下需要回国的,甲方应负担回国旅费。

(十一)执行本协议的一切文件与资料应以中英文书写,并采用公制单位。

(十二)本协议书经双方签字后需经中国政府批准才能生效。本协议以中英文写成一式两份,双方各执一份,具有同等效力。

(十三)双方法定地址

中国_________公司_________国_________公司

地址:地址:

电传:电传:

甲方代表签字:乙方代表签字:

中国_________公司_________国_________公司

附件:技术咨询具体范围

展开阅读全文

篇7:专业技术咨询合同

范文类型:合同协议,适用行业岗位:技术,全文共 719 字

+ 加入清单

发包方: (以下简称甲方) 承包方:上海南晓消防工程设备有限公司 (以下简称乙方) 经甲乙双方协定,就甲方消防系统的维护保养事宜达成如下协议:

一、 甲方的消防系统包括: 系统、 系统、 系统、和 系统,在 年 月 日至 年 月 日期间由乙方负责维护保养,保养期为 年。

二、 保养期责任细则:

(一)、本合同签字生效后,乙方在日内完成对消防系统的全面检查,检修。

(二)、本合同生效后一年内,乙方免费对本消防系统进行4次全面例行检查、维护,分别在每季度的第一个月进行。

(三)、遇到突发火灾报警系统故障,甲方应及时通知乙方,乙方须紧急派员排除和维修。对于一般故障,乙方人员在24小时内到达进行维修。

(四)、消防主管部门进行年检时,乙方人员到场,并保证系统工作正常。

(五)、甲方应为乙方工作人员现场工作提供方便及相应安全措施,乙方工作人员应遵守甲方的规章制度。

(六)、乙方在提供技术服务时,不负责任何间接责任或由此引起的其它责任(如间接损坏、损失及营业利益之损失)。

(七)、乙方维修保养范围不包括人为损坏、更改装修而产生的损坏。

(八)、每次维护保养后,甲方有关负责人需在维修记录表上签字,一式 份,双方备案。

三、 费用及付款方式:

(一)、本合同总价为: 元整。

(二)、在完成对消防系统每季度一次的全面检查、测试及维修后,甲方预付给乙方合同总价的 %,即: 元整。以此按每季度类推。

四、 其它:

(一)、本合同以签字日起生效,有效期为 年。

(二)、本合同一式 份,甲、乙双方各执 份。

(三)、合同中未尽事宜,通过友好协商解决。

甲方: 乙方:上海南晓消防工程设备有限公司 法人代表: 法人代表:

联系人: 联系人:

地址: 地址:

电话: 电话:

传真: 传真:

展开阅读全文

篇8:建设工程技术咨询合同

范文类型:合同协议,适用行业岗位:工程,技术,全文共 1619 字

+ 加入清单

建设单位(以下简称甲方):_______________________________________

地址:______________________________________________________________

邮政编码:______________________ 电话:____________________________

法定代表人:___________________ 职务:____________________________

咨询单位(以下简称乙方):______________________________________

地址:______________________________________________________________

邮政编码:______________________ 电话:____________________________

法定代表人:___________________ 职务:____________________________

为使__________________建筑安装工程的构想科学,设计和施工经济、合理,建设速度快,误差小,经甲乙双方充分协商,特订立本合同。

第一条 甲方应于________年________月________日以前将规划局红线图、上级部门批文、委托书以及建筑安装工程的建筑面积、安装项目、消防方式、库房每层净高等资料提交乙方。

第二条 乙方根据甲方要求,对______________________建筑安装工程的地形、地质条件、建筑安装构想等进行可行性研究,最后编制出设计任务书及匡算表,于________年____月____日以前交付甲方。

第三条 甲方根据国家主管部门规定的工程设计收费标准,承付乙方咨询费________元。自本合同签订之日起________日内,甲方先付给乙方__________元,待乙方将设计任务书及匡算表交付甲方后________日内,再付给乙方__________元。

第四条 为本咨询工程需要到外地进行调研、收集资料人员的差旅费,由甲方负担。

民法典

第五条 甲方的违约责任

1、甲方如不按本合同规定的时间向乙方送交有关文件、图纸和资料,乙方可按耽误的时间顺延交付设计任务书及匡算表的时间。

2、甲方如不按本合同规定的时间向乙方交付咨询费,迟延一天,按迟延交付款额罚款___________‰。

3、甲方如果中途中断咨询请求,乙方咨询工作已经过半的,应付给乙方全部咨询费;咨询工作尚未过半,按总咨询费的50%收费。

第六条 乙方的违约责任

1、乙方如不按本合同规定的时间交付设计任务书及匡算表,迟延一天,按总咨询费金额罚款____________‰。

2、乙方如中途中断咨询,应按总咨询费向乙方交付罚款。

3、乙方所提供的技术咨询服务,因质量缺陷或过错给甲方造成经济损失的,应负责赔偿。如果由此引起重大事故,造成严重后果的,还应追究其主要负责人的行政责任或刑事责任。

第七条 其他约定:_________________________________________________________。

第八条 本合同自签订之日起,甲乙双方不得随意更改。如有未尽事宜,需经双方协商解决。本合同正本一式两份,甲乙双方各执一份,合同副本一式________份,分别交____________建筑工程主管部门、建行、_____________________________等单位各一份。

(以下无合同正文)

建设单位(甲方):__________________________ (签章)

负责人:______________

_____年____月____日

咨询单位(乙方):___________________________ (签章)

负责人:_______________

_____年____月____日

展开阅读全文

篇9:技术委托咨询合同

范文类型:委托书,合同协议,适用行业岗位:技术,全文共 1266 字

+ 加入清单

项目编号:_________

项目名称:_________

起止年限:_________

承担单位:_________

单位地址:_________

邮编:_________

项目负责人:_________

电话:_________

为加强科技计划项目的实施与管理,根据《中华人民共和国合同法》规定,甲方——_________、乙方——项目承担单位、丙方——项目保证单位,就有关事宜签订本合同。

一、_________项目经_________号、_________号文批准列入_________市_________年科技发展计划正式下达。乙方必须将该项目的实施列入本单位工作计划,提供项目执行的所需条件,并按下列要求完成研究、开发任务:

1.研究、开发内容和目标,以及主要技术经济指标。

_________。

2.提交成果的形式、质量、数量、产业规模及社会经济效益。

_________。

3.计划进度:

_________年,年度计划内容:_________。

_________年,年度计划内容:_________。

_________。

二、甲方核拨乙方科技经费_________万元,不足部分由乙方自筹解决。经费采取一次性或分年度拨款,计划于:

_________年,拨款_________万元;

_________年,拨款_________万元;

_________年,拨款_________万元。

三、合同签订后,由市财政局及时将项目经费拨给乙方;由各市(县)、区承担的项目,市财政局将向县级财政局下达三项经费指标。

四、乙方应落实自筹项目经费,以项目为核算对象进行单独核算,按科技经费开支范围有关规定,专款专用,并必须于每年12月前向甲、丙方提交年度计划执行情况报告和下一年度计划实施方案。

五、丙方应将本项目列入本地或本系统的科技发展计划进行管理,监督检查并保证合同条款的执行,协助解决合同执行过程中出现的问题。市本级行政、事业单位所承担科技计划项目的财务决算和监督,主管局财务扎口管理。

六、在合同执行过程中,任何一方不得擅自修改合同内容,如确需要修改,应由甲、乙、丙三方共同商定,在修改条款上经三方签章或重新签订合同方能生效。

七、甲方中途无故撤销或不履行合同时,所拨经费不得追回,乙方如无正常理由不履行合同,或非不可抗拒的客观原因,致使合同无法执行时,甲方有权追回所拨经费。

八、甲、乙、丙各方对技术经济资料负有保密责任。

九、本合同文本一式四份,其中甲乙丙三方各一份,财政局一份。

甲方(盖章):_________ 乙方(盖章):_________

法定代表人(签):_________ 法定代表人(签):_________

处室负责人(签):_________ 课题负责人(签):_________

_________年____月____日 _________年____月____日

丙方(盖章):_________

法定代表人(签):_________

委托代理人(签):_________

_________年____月____日

展开阅读全文

篇10:技术引进协议书_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 1621 字

+ 加入清单

技术引进协议书

甲方:_________(技术出口国的企业、其他组织,写明名称、法定代表、注册国、法定地址等;个人的,写明姓名、性别、年龄、职业和地址)

乙方:_________(技术引进国的企业和其他组织,写明企业名称、法定代表人、法定地址等;个人的,写明姓名、性别、年龄、职业和地址)

甲乙双方就转让_________(技术名称)达成协议如下:

第一条 甲方为转让方:_________(写明甲方的基本情况);乙方为受让方:_________(写明乙方的基本情况)

第二条 甲方转让技术的内容:_________(写明转让技术的名称、范围、技术指标及技术资料等技术条件。合同中应当明确规定技术对象、目标、内容、工艺过程、工艺要求技术参数、技术资料等。)

第三条 技术转让方式:_________(是独家转让还是普通许可,要在合同中订明)

第四条 价格及支付条款:_________(要写明价格条件,用何种货币作为支付手段,在什么阶段支付等内容)

第五条 技术验收条款:_________(要写明技术验收包括技术资料的验收和产品考核验收。通常要规定验收的时间、地点、次数、人员标准和费用等方面的内容。)

第六条 技术及其权利保证条款:_________(写明该技术的各种指标和先进程度,对涉及到专利权等技术权利要作出相应的承诺,以确保引进的技术不发生权益纠纷。)

第七条 技术培训和技术服务条款:_________(写明技术培训的内容,通常包括培训的人数、专业、时间和期限,培训的内容、方法和要求。技术服务通常包括技术指导、技术服务的专业人员的专业、人数、级别和工作时间等。)

第八条 技术保密条款:_________(应明确技术保密范围和期限。保密期一般是不超过合同的有效期限。)

第九条 受让方权利条款:_________(写明受让方对技术的使用权、制造权、销售权及出口的规定、权利行使的范围和条件等内容。)

第十条 不可抗力事件及免责条件:_________(不可抗力条款主要包括不可抗力的范围,后果,处理及免责范围。不可抗力一般应为当事人在订立合同时不能预见,对其发生的后果不能避免并不能克服的事件。不可抗力事件又可分为两类,即自然原因引起的不可抗力和社会原因引起的不可抗力。合同中必须对这些问题加以明确规定。)

第十一条 违约责任条款:_________(包括违约构成、违约补救、索赔方式、争议解决方式等内容。)

第十二条 争议解决及法律适用

凡因执行本合同所发生的或与本合同有关的一切争议,双方应通过友好协商解决;如果协商不能解决,应提交北京中国国际贸易促进委员会对外经济贸易仲裁委员会,根据该会的仲裁程序暂行规则进行仲裁。仲裁裁决是终局的,对双方都有约束力。(或者规定:凡因执行本合同所发生的或与本合同有关的一切争议,双方应通过友好协商解决。协商不成,提交_________国_________地_________仲裁机构根据该仲裁机构的仲裁程序进行仲裁。仲裁裁决是终局的,对双方都有约束力。)

仲裁依据中国的法律裁决当事人之间的纠纷争议。

第十三条 合同的生效期限和终止

本合同自_________年_________月_________日起生效,因_________终止(写明终止的原因)。

第十四条 合同的变更和解除:_________(写明合同变更和解除的条件)

第十五条 合同文本使用中文和英文(其他文字亦可)两种文本。如有不同,以中文为准。

第十六条 本合同未尽事宜,双方协商签订补充协议。补充协议与本合同具有同等效力。

甲方(公章):_________ 乙方(公章):_________

法定代表人(签字):_________ 法定代表人(签字):_________

_________年____月____日 _________年____月____日

签订地点:_________ 签订地点:_________

展开阅读全文

篇11:技术咨询协议书

范文类型:合同协议,适用行业岗位:技术,全文共 1467 字

+ 加入清单

甲方:________

乙方:________

第一条项目名称:_______

第二条委托方的主要义务

⒈自本合同生效后____日内,向顾问方提供下列背景资料:__________

⒉向顾问方支付报酬共_____元;分期支付。具体方式如下_____________

第三条顾问方的主要义务

⒈在____年__月__日前完成咨询报告或解答委托方提出的问题;

⒉保证提出咨询报告符合下列要求:________。

第四条保密条款

本合同有效期内,双方当事人应对下列技术资料承担保密义务:_____。

本合同期满后____年内,双方当事人应对下列技术资料承担保密义务:______。

第五条验收标准和方式条款

对顾问方提供的咨询报告,按以下标准验收:_________。

具体验收方式如下:__________。

第六条委托方的违约责任

⒈委托方迟延提供合同约定的技术资料,或者所提供的数据,资料有严重缺陷,影响工作速度和质量的,应当如数支付报酬,并支付数额为_____的违约金。

⒉委托方逾期2个月不提供或者补充有关技术资料和数据,导致顾问无法开展工作的,顾问方有权解除合同。委托方应当支付数额为____的违约金。

⒊委托方迟延支付报酬,应支付数额为____的违约金委托方不支付报酬,应当退还咨询报告和意见,补交报酬,支付数额为_____的违约金。

第七条顾问方的违约责任

⒈顾问方迟延提交咨询报告和意见的,应当支付数额为____的违约金;

⒉顾问方提交的咨询报告不符合合同约定条件的,应当减收或免收报酬;不提交咨询报告和意见,或者所提交的咨询报告和意见水平低劣,无参考价值的,应当返还报酬,支付数额为_____的违约金;

⒊顾问方在接到委托方提交的技术资料和数据之日起超过2个月不进行调查论证的,委托方有权解除合同,顾问方应当支付数额为____的违约金。

第八条有关技术成果归属条款

在履行本合同过程中,顾问方利用委托方提供的技术资料和工作条件所完成的新的技术成果,除合同另有约定外,属于顾问方;委托方利用顾问方的工作成果所完成的新的技术成果,除合同另有约定外,属于委托方。对新的技术成果享有所有权(或者持有权)的一方当事人,可依法享有就该技术成果取得的精神权利(如获得奖金、奖章、荣誉证书的权利)、经济权利(如专利权、非专利技术的转让权,使用权等)和其他利益。

第九条咨询报告的实施风险责任条款

委托方有实施顾问方提供的经过验收合格的咨询报告和意见过程中出现的不良后果和经济损失,由委托方承担责任。

第十条本合同争议的解决办法:____________。

第十一条名词和术语的解释:_________。

本合同自双方当事人签字、盖章后生效。

顾问方负责人(或授权代表)委托方负责人(或授权代表)

签名:_________(盖章)签名:_______(盖章)

签字时间:_________签字时间:________

签字地点:_________签字地点:________

开户银行:_________开户银行:________

帐号:___________帐号:__________

顾问方担保人(名称):___委托方担保人(名称):__

地址:___________地址:__________

负责人(或授权代表)负责人(或授权代表)

签字:__________(盖章)签字:_______(盖章)

签字时间:_________签字时间:________

签字地点:_________签字地点:________

开户银行:_________开户银行:________

帐号:___________帐号:__________

展开阅读全文

篇12:环评技术咨询合同范本_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 1820 字

+ 加入清单

环评技术咨询合同范本

技术咨询是指咨询方根据委托方对某一技术课题的要求,利用自身的信息优势,为委托方提供技术选用的建议和解决方案。技术咨询是对特定技术项目提供可行性论证、经济技术预测、专题调查、分析评价等咨询报告,它是技术市场的主要经营方式和范围。以下是第一范文网小编今天要与大家分享的:环评技术咨询合同相关范本。内容仅供参考,欢迎阅读!

环评技术咨询合同

项目名称: *项目

甲 方: 潍坊X有限公司

乙 方: 潍坊市环境科学研究设计院

签订地点:山东省潍坊市

签订日期:20xx年6月21日

有效期限:20xx年6月21日至20xx年6月20日

中华人民共和国科学技术部监制

根据《中华人民共和国合同法》、《建设项目环境保护管理条例》(国务院[1998]第253号令)、《中华人民共和国环境保》、《中华人民共和国环境影响评价法》、《山东省实施〈中华人民共和国环境影响评价法〉办法》中的有关规定,合同双方就《*项目环境影响报告书》项目进行“环境影响评价”的专项技术服务,经协商一致,签订本合同,由双方共同恪守,甲方委托乙方进行技术服务的内容如下:

一、标的内容、形式和要求

为掌握该建设项目的环境保护基本情况及建设期和投产后对建设项目周围环境的影响,预防因规划和建设项目实施后对环境造成不良影响,促进经济、社会和环境的协调发展,潍坊X有限公司委托潍坊市环境科学研究设计院按照国家相关法律法规及标准、环保主管部门对该项目环境影响评价的有关要求,编制完成《*项目环境影响报告书》。

二、履行的期限、地点和方式

甲方提供的技术资料齐全的情况下,合同签订及预付款后70个工作日内,编制完成《*项目环境影响报告书》总量申请版,如甲方不能及时向乙方提供环评所需资料及经费,则评价进度顺延。

三、主要协作事项

为保证乙方有效进行技术服务工作,甲方应当向乙方提供的工作条件:

1、甲方应向乙方准确提供与工程有关的基本情况资料(工程概况、企业简介、总平面布置、资源、能源的储运、工艺流程、工艺参数、污染物排放参数,污染治理措施等)及与工程有关的专业技术资料(周围环境的地质、地形地貌、水文、气象、社会情况、工农业情况、土地利用规划等)。

2、提供环评执行标准的批文批复和总量申请指标确认书;提供经发局(委)的项目立项(备案)文件,项目的可行性研究报告。

3、乙方负责与地方有关部门的协调工作(如污染源调查;用水、用电、供汽等证明;污水处理接收证明;固废(危险废物)处置协议等)。

4、甲方负责提供公众参与调查材料。

5、甲方应为乙方现场踏勘、环境现状监测提供方便条件。

6、合同签订之日起实施,由甲方委派专人同乙方项目负责人协调落实。

四、技术资料的提供和保密

双方均应保护对方的知识产权和技术成果,未经对方同意,任何一方均不得对对方的资料及文件擅自修改、复制或向第三人转让或用于本合同项目外的其他建设项目。如发生以上情况,泄密方承担一切由此引起的后果并承担赔偿责任。

五、验收标准和方法

由乙方协助甲方将编制完成的《*项目环境影响报告书》上报山东省环境保护厅批复。乙方将负责根据各有关部门、专家组的意见,修改送审版环评报告书达到质量要求。

六、价款及其支付方式

根据国家计委、国家环境保护总局关于规范环境影响咨询收费有关问题的通知(计价格[20xx]12号),该项目技术服务费总额共计人民币壹拾捌万圆整(¥180000)(包括监测费,不包括会务费、专家评审费和评估费)。合同签订后预付人民币玖万圆整(¥90000),报告书通过专家组评审,报告书(报批版)完成后付清余款。

因工程内容导致环评内容改动较大的,甲方要求评价时间加急等其他特殊情况,评价经费另行协商。

七、合同生效及其他

1、环评期间遇到的其他相关问题,双方协商解决。环评涉及的项目名称如需修改,在报告书、报告表完成前由甲方及时通知乙方进行修改。

2、本合同双方签字盖章即生效,一式贰份,甲方一份,乙方一份。

3、未尽事宜,经双方协商一致,可签订补充协议,补充协议与本合同具有同等效力。

甲 方 名称(或姓名) 潍坊X有限公司(签章)

法定代表人 (签章) 委托代理人 (签章)

联系人 (签章)

住所

(通讯地址)

电话 电子邮箱

开户银行

帐号 邮政编码

乙 方 名称(或姓名) 潍坊市环境科学研究设计院(签章)

法定代表人 (签章) 委托代理人 (签章)

联系人 (签章)

住所

(通讯地址) 潍坊市奎文区新华路7号

单位网址:

电话/传真

电子邮箱

开户银行

帐号 邮政编码 261041

展开阅读全文

篇13:技术出口合同范本_合同范本

范文类型:合同协议,适用行业岗位:技术,外贸,全文共 49001 字

+ 加入清单

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run, Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract,the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

展开阅读全文

篇14:技术开发合同范本_合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 1245 字

+ 加入清单

技术开发合同范本

项目名称 :___________________

委托人:_____________________

研究开发人:___________________

签订地点:_____省___________市(县)

签订日期:_____年___月___日

有效期限:___年__月__日至__年__月__日

依据《中华人民共和国合同法》的规定,合同双方就__________项目的技术开发,经协商一致,签订本合同。

一、标的技术的内容、形式和要求:

二、应达到的技术指标和参数:

三、研究开发计划:

四、研究开发经费、报酬及其支付或结算方式:

(一)研究开发经费是指完成本项研究开发工作所需的成本;报酬是指本项目开发成果的使用费和研究开发人员的科研补贴。

本项目研究开发经费及报酬:_________元

其中:委托人提供______元,研究开发人提供_______元。

如开发成本实报实销,双方约定如下:

(二)经费和报酬支付方式及时限(采用以下第___种方式):

①一次总付:______元,时间:_____________。

②分期支付:______元,时间:_____________。

③按利润______%提成,期限:___________。

④按销售额_______%提成,期限:___________。

⑤其他方式:___________________

五、利用研究开发经费购置的设备、器材、资料的财产权属:

六、 履行的期限、地点和方式:

本合同自___年__月__日至___年__月__日在_____(地点)履行。

本合同的履行方式:

七、技术情报和资料的保密:

八、技术协作和技术指导的内容:

九、风险责任的承担:

在履行本合同的过程中,确因在现有水平和条件下难以克服的技术困难,导致研究开发部分或全部失败所造成的损失,风险责任由________承担。(1. 研究开发人;2. 双方;3. 双方另行商定)

经约定,风险责任委托人承担________%

研究开发人承担__________%

本项目风险责任确认的方式为:

十、技术成果的归属和分享:

(一)专利申请权:

(二) 非专利技术成果的使用权、转让权:

十一、验收的标准和方式:

研究开发所完成的技术成果,达到了本合同第二条所列技术指标,按___________标准,采用___________方式验收,由______________人出具技术项目验收证明。

十二、违约金或者损失赔偿额的计算方法:

违反本合同约定,违约方应当按《合同法》第三百三十三、三百三十四条、三百三十六条规定承担违约责任。

(一)违反本合同第___条约定,____人应当承担违约责任,承担方式和违约金额如下:_____________________________;

(二)违反本合同第___条约定,_____人应当承担违约责任,承担方式和违约金额如下:______________________________;

(三)______________________________;

共2页,当前第1页12

展开阅读全文

篇15:建设工程技术咨询合同范本_合同范本

范文类型:合同协议,适用行业岗位:工程,技术,全文共 1239 字

+ 加入清单

建设工程技术咨询合同范本

建设单位:_________,以下简称甲方;

咨询单位:_________,以下简称乙方。

为使_________建筑安装工程的构想科学,设计和施工经济、合理,建设速度快,误差小,经甲乙双方充分协商,特订立本合同,供双方遵守执行。

第一条 甲方应于_________年_________月_________日以前将规划局红线图、上级部门批文、委托书以及建筑安装工程的建筑面积、安装项目、消防方式、库房每层净高等资料提交乙方。

第二条 乙方根据甲方要求,对_________建筑安装工程的地形、地质条件、建筑安装构想等进行可行性研究,最后编制出设计任务书及匡算表,于_________年_________月_________日以前交付甲方。

第三条 甲方根据国家计委颁发试行的《工程设计收费标准》,承付乙方咨询费_________元。自本合同签订之日起_________日内,甲方先付给乙方_________元,待乙方将设计任务书及匡算交付甲方后_________日内,再付给乙方_________元。

第四条 为本咨询工程需要到外地进行调研、收集资料人员的差旅费,由甲方负担。

第五条 甲方的违约责任

1.甲方如不按本合同规定的时间向乙方送交有关文件、图纸和资料,乙方可按耽误的时间顺延交付设计任务书及匡算表的时间。

2.甲方如不按本合同规定的时间向乙方交付咨询费,迟延一天,按迟延交付款额数罚款_________‰。

3.甲方如果中途中断咨询请求,乙方咨询工作已经过半的,应付给乙方全部咨询费;咨询工作尚未过半,按总咨询费的_________%收费。

第六条 乙方的违约责任

1.乙方如不按本合同规定的时间交付设计任务书及匡算表,迟延一天,按总咨询费金额数罚款_________‰。

2.乙方如中途中断咨询,应按总咨询费向乙方交付罚款。

3.乙方所提供的技术咨询服务,因质量缺陷或过错给甲方造成经济损失的,应负责赔偿。如果由此引起重大事故,造成严重后果的,还应追究其主要负责人的行政责任或刑事责任。建设工程技术咨询合同范本

第七条 其他约定条款

_________。

第八条 本合同自签订之日起,甲乙双方不得随意更改。如有未尽事宜,需经双方协商解决。本合同正本一式两_________,甲乙双方各执_________份。合同副本一式_________份,分别交_________各一份。

建设单位(甲方)(盖章):_________                   咨询单位(乙方)(盖章):_________

地址:_________                                      地址:_________

法定代表人(签字):_________                        法定代表人(签字):_________

电话:_________                                       电话:_________

展开阅读全文

篇16:技术咨询合同格式

范文类型:合同协议,适用行业岗位:技术,全文共 3339 字

+ 加入清单

范本 合同是当事人或当事双方之间设立、变更、终止民事关系的协议。依法成立的合同,以下是“新技术咨询合同范本”,希望能够帮助的到您! 鉴于甲方(委托方)需要就__________________技术项目向乙方(顾问方)咨询;鉴于乙方愿意接受甲方的委托并提供咨询意见;根据《中华人民共和国民法典》有关技术合同的规定及其他相关法律法规的规定,双方经友好协商,同意就以下条款订立本合同,共同信守执行。

第一条咨询项目名称

1.1本合同的技术咨询项目名称为:(本合同所涉及到的技术咨询项目的名称)

1.2技术咨询合同的项目名称应使用简明、准确的词句和语言反映出合同的技术特征和法律特征,并且项目名称一定要与内容相一致,尽量使用规范化的表述,如关于______________技术的技术咨询合同。

1.3甲乙双方可以就有关科学技术与经济、社会协调发展的软科学研究项目;促进科技进步和管理现代化,提高经济效益和社会效益的技术项目;其他专业技术项目订立技术咨询合同。

第二条咨询的内容、形式和要求

2.1本合同的履行标的不是技术成果。而是供委托方决策和选择的咨询报告,即顾问方为委托方就科学研究、技术开发、技术改造、成果推广、工程设计、科技管理等科技项目提出的建议、意见和方案。

2.2本合同顾问方就委托方的某项特定技术项目向委托方提供咨询报告,其工作内容如下:

(1)可行性论证:即对某项特定的经济技术项目实施的技术先进性、经济合理性进行综合分析、计算和评价,从而确定该项目是否成功和发展的可能。

(2)技术预测:即对咨询技术项目的发展趋势进行展望与预测,主要是对新技术、新设备、新工艺、新材料、新产品的发展动态,以及这些技术的发展对某些产品需求的影响的预。

(3)专题技术调查:即针对咨询技术项目的技术要求,采取多种方式对专题资料、数据的考查与收集工作。

(4)分析评价报告:即对某项技术的发展给社会带来的积极作用和消极作用进行全面分析研究和全面评价工作。

2.3顾问方向委托方提供的咨询报告应当符合以下三个条件:

(1)咨询报告是对特定技术项目的分析、论证、评价、调查和预测的报告或意见;

(2)以可行性论证、技术预测、专题技术调查、分析评价报告或意见的形式提交;

(3)应达到合同约定的科技水平,对委托方有相应的参考价值。

2.4委托方和顾问方约定顾问方提交的咨询报告应达到以下要求:(双方对咨询报告所应达到的要求的约定)

2.5本合同所称的“咨询报告达到合同约定的要求”仅指咨询报告达到合同约定的形式内容和通过约定的验收方法,不能扩大理解为保证委托方按咨询报告实施达到理想的经济效益和社会效益。

第三条履行期限、地点和方式

3.1本合同的履行期限是指奉合同从开始履行到履行完毕的具体时日。双方约定各自的履行期限为:(如委托方在本合同生效后____日内向顾问方提交有关咨询资料和数据;顾问方应在本合同生效后____日内完成咨询报告并提交给委托方等)如双方未约定履行期限,义务方可以随时履行,权利方也可以随时要求对方履行,但应给对方必要的准备时间。

3.2本合同的履行地点可以由双方约定在委托方所在地。也可以约定在顾问方所在地,或者双方同意的其他地点。如果约定不明确,则推定在顾问方所在地履行。

3.3本合同的履行方式可以约定采用顾问方向委托方提交可行性论证、技术预测、专题技术调研及分析评价报告等方式。

第四条委托方的协作事项

4.1委托方的协作事项是指为了使顾问方顺利开展咨询工作,委托方应向顾问方提供必要的工作条件、技术背景资料等。

4.2委托方应协作的事项主要有以下几个方面:

(1)阐明咨询的问题,向顾问方提供技术背景材料及有关技术、数据;

(2)根据顾问方的要求补充说明有关情况,追回有关资料、数据;

(3)提供给顾问方的技术资料、数据有明显错误和缺陷,应及时修改、完善;

(4)为顾问方进行调查论证提供必要的工作条件。

4.3双方约定委托方应向顾问方提供以下咨询资料和数据:(委托方应提供的技术背景材料和有关技术、数据)

4.4双方约定委托方应向顾问方提供以下工作条件:(委托方应提供的工作条件)

4.5以上协作事项应约定的明确具体,要尽量写明提供资料及工作条件的具体时间、内容、数量和方式等。

第五条技术情报和资料的保密

5.1本合同内容如涉及国家安全和重大利益需要保密的,应在合同中载明秘密事项的范围、密级和保密期限以及各方承担的保密义务。

5.2委托方提供的技术资料、数据需要保密的,应当在合同中约定保密范围的期限。合同没有约定的,委托方不得干预顾问方引用、发表和向

第三者提供。

5.3双方可以约定不论合同是否变更、解除或者终止,合同保密条款不受其限制而继续有效,各方均应继续承担约定的保密义务。

第六条验收、评价方法

6.1鉴于技术咨询合同的验收比较特殊,其成果大都属于软科学范畴,在某种程度上具有无形、不可操作的特点,其验收标准一般无法以硬指标衡量,故双方应本着科学、公正、实事求是的原则。严格按照合同约定的要求进行验收,不能过于苛刻或显失公平。

6.2双方可以在合同中约定对咨询报告和意见的验收或者评价方法,可以约定采用鉴定会、专家评估的方法验收,也可以约定以委托方单方认可视为验收通过。但不论采用何种方式验收都应由验收方出具书面验收证明。

6.3如果双方在合同中没有约定验收或评价方法,则按照合同实用的一般要求组织鉴定。

第七条报酬及其支付方式

7.1在技术咨询合同中,技术咨询的经费统称为报酬,双方应明确约定报酬的金额。在本合同中委托方应向顾问方支付报酬________元人民币。

7.2双方约定报酬的支付方式和期限为:(可以约定采用一次总付、分期支付等方式支付,并明确约定支付期限)

7.3双方可以约定在合同履行过程中,顾问方进行必要的调查研究、分析论证、试验测定活动经费如果不包含在合同报酬中,其费用应由哪一方支付、支付的金额及方式。

第八条违约责任

8.1委托方未按照合同约定提供必要的数据和资料,影响顾问方工作进度和质量的,所支付的报酬不得追回,未支付的报酬应当如数支付。

8.2委托方未按照合同约定支付报酬的.,应当补交报酬,并支付违约金或者赔偿损失。

8.3委托方未按照合同约定提供必要的数据和资料,或者迟延提供合同约定的数据和资料,或者所提供的数据、资料有严重缺陷,影响工作进度和质量的,应当如数支付违约金或者赔偿损失。

8.4委托方逾期两个月不提供或者不补充有关技术资料、数据和工作条件,导致顾问方无法开展工作的,顾问方有权解除合同,委托方应当支付违约金或者赔偿损失。

8.5顾问方未按期提出咨询报告或者提出的咨询报告不符合合同约定的,应当减收或者免收报酬,并支付违约金或者赔偿损失。

8.6顾问方迟延提交咨询报告和意见的,应当支付违约金;咨询报告和意见不符合合同约定条件的,应当减收或者免收报酬,并支付违约金或者赔偿损失。

8.7顾问方不提交咨询报告和意见,或者所提交的咨询报告和意见水平低劣,无参考价值的,应当免收报酬,并支付违约金或者赔偿损失。

8.8顾问方在接到委托方提交的技术资料和数据之日起两个月内,不进行调查论证的,委托方有权解除合同。顾问方应当返还已收的报酬,并支付违约金或者赔偿损失。

第九条争议的解决办法

9.1甲乙双方在履行本合同的过程中一旦出现争议,可以根据自愿选择协商、调解、仲裁或者诉讼的方式解决争议。

9.2争议发生后,双方应本着平等自愿的原则,按照合同的约定分清各自的责任,采用协商的办法解决争议。

9.3若双方不愿协商或者协商不成的,可以将争议提交双方共同指定的

第三者进行调解解决。

9.4若双方协商、调解不成的或者不愿协商、调解的,可以约定将争议提交____________仲裁委员会仲裁解决。

9.

5.双方也可以约定不通过仲裁,直接向法院提起诉讼,通过诉讼的方式解决争议。

第十条本合同经双方签字、盖章后生效;如需经有关部门批准的,以有关部门的批准日期为合同生效日。

第十一条本合同未尽事宜,由双方协商解决。

第十二条本合同一式________份,甲乙双方和有关批准部门各执一份。 甲方:(签章)

乙方:(签章) 法定代表人:

法定代表人:____日期:____日期: 审批部门意见: 审批部门:(签章)____日期:

展开阅读全文

篇17:新版技术转让协议范本

范文类型:合同协议,适用行业岗位:技术,全文共 4264 字

+ 加入清单

中国--产品进出口公司和上海---产品生产厂(以下简称中方)与英国--广播有限公司(以下简投资人)和德国--贸易有限公司(以下简称apl)签订本合同,其条款如下:

第一条技术转让

(1)中方为在上海生产投资人的甲型和乙型产品而引进必需的技术。这些产品以下简称为产品。

(2)投资人应中方要求按本合同提供其拥有的制造产品所需的技术和资料。

(3)产品的名称规格详见附件一。

(4)投资人应向中方提供制造产品所需的贸易秘密、制造技术和专有技术方面的资料。

投资人向中方提供的资料详见附件二。

第二条设备规划

(1)中方必须按照投资人的建议准备产品生产设施。

(2)为了帮助在上海准备生产设施,投资人应提供援助,包括供应下列资料:

①生产线计划。

②生产劳动力安排计划。

③设备布局计划。

④基础设施计划,如水电供应、空调、运输、通讯等。

⑤设备安装操作计划。

⑥生产管理计划。

⑦推销计划。

上述资料应于本合同生效后60天内由投资人提供中方。

(3)生产线必须按照附于本合同的生产细目表,即附件三。

(4)中方应自行准备生产计划,但必要时可要求投资人给予合作。

第三条许可费的支付

(1)投资人向中方转让技术的许可费如下:

①中方向投资人购买产品生产权应交入门费______美元。

②每件出售的产品应向投资人交付售价3%的提成费。

(2)一切付款应按照本合同及本条款的有关约定事项办理。

(3)一切付款应通过中国银行办理。

(4)支付方式采用不可撤销的即期信用证,用美元支付。

(5)中方应在本合同生效后一个月内,开立不可撤销的信用证向投资人支付入门费。

(6)投资人应在收到上述信用证后30天内提供合同规定的一切技术资料。

(7)中方每次向投资人订购合同规定的材料时,应在信用证的金额中加上3%的提成费;也可在支付货款时,为提成费另开一份信用证。

(8)中方负责在中国发生的一切费用;投资人负责在国外发生的一切费用。

第四条销售

(1)投资人应帮助中方兴趣办展销会、研讨会、广告宣传等,以推销中方生产的产品。但费用应由中方负担。

(2)在开展广告宣传等活动中,中方如有需要可以使用投资人的广告标识。但投资人既不参与中方的盈亏,也不对此承担责任。

第五条质量控制

(1)在上海制造产品的质量必须按照投资人的质量控制标准进行鉴定。

(2)上海制造产品的质量检验,在开始阶段应由双方工程是由联合进行,其细节详见附件四。

(3)上海制造产品的质量检验必要时应进行两次。如果第二次检验未能达到规格指标而且原因又是在投资人方面,则投资人应自费解决存在的问题。

(4)如果品质检验合格,双方工程是由应签署品质检验证明书一式两份,每方各执一份。

第六条设备交货

(1)中方应向投资人购买生产产品所需的设备。

(2)生产产品所需设备的品名、规格详见附件五。

(3)中方投资人购买设备的价格细节由双方商定,并另签设备购买合同。

(4)投资人运交的设备应该是新型的、未用过的。

(5)投资人向中方运交设备的价款应以不可撤销的即期信用证按cif中国口岸条件用美元支付。

(6)投资人应按本合同的交货计划表运交设备。

(7)投资人应按合同的规定,向中方提供与设备有关的技术资料。

(8)设备正式交货日期为提单的日期。投资人应将提单号码、装船日期、装箱单、抵达日期等及时通知中方。同时,投资人还应将上述资料单据副本寄给中方。

(9)合同规定的设备和技术资料如有遗失,中方得要求投资人补交。

(10)投资人运交设备应使用坚固的包装,能以经受长途运输。

(11)投资人的装箱单应写明:

①合同号码;②收货人姓名;③目的港;④装船唛头;⑤重量;⑥箱号;⑦收货人标记。

(12)投资人应将装货内容清单的副本放入包装内。

第七条接收设备

(1)中方应准备设施和场地以接收和保管投资人运来的设备。

(2)投资人应在中方提出对运到的设备进行安装和试车的要求后三周内派出工程师。中方应为此事向投资人提供翻译之类的必要帮助。

(3)投资人的工程师应为安装试车任务停留两周。

(4)运交设备的验收工作,应由双方工程师和中国检验官员一起进行,详细规则见附件六。

(5)如果初次检验不合格,应进行第二次检验。如果第二次检验仍不合格,则投资人应在两个月内自费调换有关设备。但是中方应该认识和接受这一点,即换货所需的时间长短要看所换的设备而定。

(6)如果检验合格,双方应签署检验证明书一式两份,每方各执一份。

(7)投资人派行往中方安装调试的工程师的居留费用均由投资人负担。

第八条设备操作和保养的培训

(1)投资人在派遣工程到中方安装调试设备时,应兴举办关于设备操作和保养的培训。中方应为此事对投资人提供诸如翻译之类的帮助。

(2)培训的时间,包括前款所讲的安装调试在内不得超过两周。

(3)培训主要用英语进行,也用汉语作为辅助语言。中方如有需要应自费准备汉英翻译员。

(4)在中方进行设备操作保养培训的工程师的居留费用均由投资人负担。

第九条对运交设备的保证

(1)按照国际习惯标准,运交设备的保证期为8个月,从中方完成验收工作起算。

(2)如果在保证期内发现运交的设备有缺点,投资人必须按中方的要求,及时适当解决。

(3)在上述情况下,该缺点经鉴定是由中方操作经验不足、搬运不当或某一物品的消耗所致,则投资人应要求中方支付实际运输费用。

(4)投资人应向中方提供与运交设备有关的最大限度的服务。

(5)保证期以后的设备保养需要向中方收取费用。但投资人应努力提供最大的合作和收取最低的费用。

第十条物资的采购

(1)中方应按本合同的规定向投资人采购生产产品所需的材料。

(2)投资人应按本合同的规定向中方运交所需的材料。

(3)投资人应力求以尽可能低的价格供应这些材料。

(4)中方采购材料的实际详细品名,另以购买合同规定。

(5)投资人应该供应最新的材料,并保证质量。

(6)中方应提前8个月向投资人送交月度生产计划和月度材料采购数量,以便材料的交货能以得到保证。

(7)投资人应尽力按照交货计划运交中方采购的材料;但是,中方应当理解和接受这样的事实,即由于市场供求不平衡等不能预见和不可避免的原因会使投资人无法按计划交货。

(8)中方对投资人运交材料的付款,必须采用不可撤销的信用证,以美元支付。

第十一条材料的出口方法

(1)材料正式交货日期为提单的日期。投资人应将提单号码、装船日期、装箱单、抵达日期等及时通知中方。同时,投资人还应将上述资料单据副本寄给中方。

(2)投资人运交中方的材料如有任何遗失或缺点,应由投资人自费办妥。

(3)投资人运交材料应使用坚固的包装,能以经受长途运输。

(4)投资人的装箱单应写明:

①合同号;②收货人姓名;③目的港;④装船唛头;⑤重量;⑥箱号;⑦收货人标记。

(5)投资人应将装货内容清单的副本放入包装内。

第十二条接收材料

(1)中方应准备设施和场地以接收和保管投资人运交的材料。

(2)投资人应在材料经过品质检验之后发运。

(3)中方必须对运交的材料验收,如有缺陷或遗失,应及时通知投资人。如果投资人承认通知合理,应自费换货。但是,中方应当认识和接受这一点,即换货需要一段合理的时间。

(4)在上述情况下,该缺点经鉴定是由于中方的错误操作所致,投资人应要求中方支付一切实际费用。

(5)如果运交材料的坏遗失是由于存放或搬运不当所致,投资人应在收到中方通知后及时换货;但是,有关费用应由中方负担。

第十三条培训中方的工程师

(1)投资人应接待十名中方工程师,并提供三个月的技术培训。

(2)投资人对中方工程师为此在德国居留期间供给膳宿,但中德之间的来回旅费除外。

(3)派出受训的中方工程师应懂得实用的英语,具有电子工程学的基础知识。

(4)教学主要用英语进行,但以汉语为辅助语言。投资人应按中方要求准备一名汉英译员,费用由中方负担。

(5)投资人应立即编写教育计划并提前通知中方。有关技术教育计划项目详见附件七。

(6)apl应同时派遣一名工程师去照料上述培训事宜。

第十四条派遣投资人的工程师

(1)投资人应两次派遣多名工程师去中方,第一次派两名去两个月,以实施这项转让计划。第二次派四名去三个,以达到产品生产指标。

(2)投资人派往中方的工程师主要用英语进行工作,但也以汉语为辅助语方。中方必要时应自费准备一名汉英翻译员。

(3)中方应负担投资人的工程师为此而在中国国内居留和旅行的各种费用,但中德之间的旅费除外。

(4)在投资人派遣工程师的任务完成以后,中方如有必要仍可要求投资人继续给予技术支持。但投资人应要求中方为这样增加的合作支付费用。合作的条款由双方将来讨论约定。

(5)中方要求投资人技术服务的细节,见附件八。

第十五条将来的技术合作

(1)投资人应为将来的发展与中方进行合作,包括高分辩能力显示等在内。

(2)上述技术合的条款,包括它的费用,应由中方、投资人、apl三方面商定并另签合同。

第十六条apl的作用

(1)apl负责中方和投资人之间的信息传递、交往媒介等,并对中方提供必要的援助。

(2)apl应为此适当向中方收取报酬。

第十七条apl的责任

(1)apl应作为中方与投资人之间的桥梁。

(2)apl应协助中方用展销会、研讨会、技术培训等办法在中国销售产品。

(3)apl应在产品品质合格时考虑把这些产品销往欧洲和非洲(南非除外)。

(4)apl应在中方派遣工程师到欧洲进行产品开发时,向他们提供免费使用的设施和工具。但中方应负担他们在欧洲的一切费用。

第十八条仲裁

(1)中方和投资人应以合作的态度解决合同争端。如解决不成,则以仲裁方式最终解决。

(2)仲裁应在瑞典斯德哥尔摩进行。

(3)中方和投资人都应受最终裁决的约束。

(4)仲裁费由败诉方负担。

(5)本合同如有某些问题仍在仲裁之中应该分开予以执行。

第十九条税款

在合同有效期间,中国的税款由中方负责;欧洲的税款由投资人和apl负责。

第二十条合同的生效

(1)不可预见的问题不应影响本合同的执行。

(2)中方、投资人、apl三方应向各自的政府申请允许有关商品的进口和出口。最后一方获知得批准之日即为本合同生效之日。三方应尽最大努力争取在80天内取得批准。

第二十一条合同的撤销

(1)如果在合同生效后六个月没有见到效果,三方保留撤销本合同的权利。

(2)本合同从生效之日起有效两年,期满后可以延长两年。

第二十二条使用的文字

本合同用中文和英文写成,两种文本具有同等效力。

第二十三条合同附件

(1)如要修改合同,有关三方面应同意签订正式修改文件成为本合同的一部分。

(2)所有附件均属有效,并应成为本合同的一部分。

签订于_______年____月______日。

中方:(签字)

投资人:(签字)

apl:(签字)

展开阅读全文

篇18:技术人员聘用合同范本

范文类型:合同协议,适用行业岗位:技术,全文共 9486 字

+ 加入清单

甲方:____________广播电台(以下简称“甲方”)

法定代表人:____________

注册地址:____________

邮编:____________

乙方(以下简称“乙方”)

国籍:____________

性别:____________

护照号码:____________

出生日期________年________月________日

在华通讯地址:____________

编码:____________

原住所地通讯地址:____________

编码:____________

电子邮箱:____________

电话:____________

传真:____________

在甲方工作起始时间________年________月________日

根据中华人民共和国法律、法规,双方在平等、自愿、协商一致的基础上签订本聘用合同。

甲、乙双方的权利和义务由本合同中约定,双方确认已经充分理解,并且将完全履行合同的任何条款。除非乙方在订立合同当时明确表示保留或者取消,否则乙方放弃任何针对本合同条款的抗辩权。

一、合同期限

第一条

1.1本合同期限自________年________月________日起,至________年________月________日止。

1.2本合同规定乙方的试用期为1个________月,自________年________月________日至________年________月________日止。

1.3甲方可根据乙方的实际工作能力和表现决定是否缩短试用期。试用期内任何一方可依法书面通知对方解除本合同。

1.4试用期内乙方有不符合甲方录用标准的行为,由于乙方故意隐瞒原因使甲方在试用期满后才得以知晓的,甲方有权按照试用期内解除本合同的规定解除与乙方的聘用合同,甲方不需向乙方支付经济补偿金。

二、工作岗位及工作岗位的调整

第二条工作岗位

2.1甲方根据工作需要及乙方的岗位意向,聘用乙方在______部门,担任______专业岗位工作。

2.2乙方应当完成的工作量以及应当达到的质量标准为:____________(注:该工作岗位职责因篇幅要求可以附件的形式列明。)

2.3乙方应始终胜任受聘岗位,并且高效履行相应的各项职责和义务。

2.4乙方应按时、按质、按量的完成甲方交付的工作任务,并且交付聘用成果或以约定的方式履行合同义务。

2.5乙方在本合同履行期间在没有得到甲方事先的书面同意前,乙方不能直接或间接地受聘于其他单位或个人。

第三条工作岗位的调整

3.1甲方根据工作需要及乙方的工作能力和表现,可以调整乙方的工作岗位,乙方应服从。

3.2当乙方工作岗位调整时,甲方相应调整乙方的岗位工资及福利待遇。

3.3当乙方对于甲方调整工作岗位有异议时,可以按照甲方规章制度规定的程序向甲方提出异议或者辞职,但乙方异议的提出不影响甲方决定的执行,乙方应当办理岗位调动交接手续,并到新的岗位提供服务。

三、工时制度和工作条件

第四条工时制度

4.1甲方实行与本单位工作性质相适应的,且符合国家和所在地相关聘用法规的工作和休息制度。

4.2根据甲方工作需要和乙方的工作岗位,甲方安排乙方执行标准工时制度。乙方每日工作时间8小时,每周工作40小时。

4.3当乙方工作岗位发生变更时,乙方须服从工作的需要调整工作时间。

第五条延长工作时间

5.1甲方根据工作需要,可以依法安排乙方加班。

5.2乙方经过甲方批准方可加班。乙方申请加班应当按照甲方规章制度规定的程序执行。

5.3甲方保证乙方每周最少休息一天。

5.4甲方安排乙方加班或者批准乙方加班的,应当按照国家及河北省规定以及甲方规章制度安排乙方补休或者支付加班工资,加班工资由所在部门于下月单独支付。每个月加班不得超过36小时。

5.5按时按量完成甲方交付的工作是乙方的责任,如乙方未能按时按量完成工作而自行或必须加班的,甲方不支付相应的加班工资或安排乙方补假。

第六条甲方为乙方提供必要的工作条件和工作工具,制定操作规程、工作范围和工作安全卫生制度。

第七条乙方应当遵守中国的法律、法规、规章及甲方制订的各项制度。

第八条出差

本合同履行期间,乙方应当接受甲方因公出差的任务。乙方出差期间的待遇按照甲方有关规定执行。

四、工作报酬及纳税

第九条工资

9.1甲方按国家分配制度的有关规定确定乙方应得的工资报酬。乙方的月工资为______元人民币(税前)。乙方试用期月工资为________________元人民币(税前,不低于正式合同期工资的80%)。

9.2月工资中最高________________元可兑换外汇。

9.3甲方根据奖金发放制度、甲方经营效益、乙方工作能力、工作表现及业绩考核,决定是否发放奖金以及发放数额,奖金于次________月支付。

9.4乙方工作岗位调整的,甲方可以调整乙方的工资的全部或者部分。

9.5乙方病假工资按照中国相关法律规定发放(详见18.1)。

9.6乙方经过批准的加班加点,加班加点期间的工资以本合同第9.1条约定的乙方工资为基数计算并执行。

9.7由于乙方违反甲方规章制度损坏甲方财产,或者违反聘用纪律和制度受到经济处罚,或者违反本合同应当支付违约金、赔偿金的,甲方有权从乙方的工资中予以扣除。

第十条工资支付

10.1甲方每月__________日以前以货币形式支付当月的工资(加班工资按10.3执行)。如遇法定休息日,则提前至最近的一个工作________日发放。工资按月发放,不足整月的按日计发,日薪为月薪的1/21.75。乙方于___________日以后入职的,当________月工资按天计算在下________月__________日前与下月工资一并发放。

10.2如果甲方因为不可控原因或者其他重大事件造成不能按时支付乙方工资的,甲方应提前3天通知乙方,经通知乙方后最长可以延期________日支付。

10.3乙方经过甲方安排或者批准加班加点、甲方应当支付加班工资的,按照工资支付周期于下个周期发放;甲方另有规定,按照规定执行。甲方安排乙方倒休的,一般情况下应在________月以内安排完倒休。在不影响正常工作的情况下,经乙方所在部门负责人同意,可以集中倒休。

第十一条个人所得税

11.1申报和缴纳个人所得税是乙方的义务,甲方按国家有关规定在乙方的工资或其他报酬内代扣代缴。

11.2除非甲、乙双方另有约定,乙方依据本合同取得的均为含税工资和其他报酬。

五、福利待遇

第十二条医疗保险、到职后健康复检及在华居留许可办理费用

12.1本合同生效后,甲方为乙方(受聘时年龄在60周岁以下)购买医疗保险。乙方按照医疗保险条款规定可在中国境内所有的社会保险定点医疗机构就诊,自行办理报销手续。有关医疗保险和医疗费用报销的详情请参阅《外籍及港澳台来华人士综合医疗保险》项目介绍及其网站,地址为。

12.2甲方为通过试用期的乙方报销到职后在出入境检验检疫中心所做的健康复检费,不含体检报告的快递费。

12.3甲方为通过试用期的乙方报销第一个合同年内的在华居留许可办理费用。

第十三条赴任和离任的交通费用补贴

甲方为合同期_________年以上(含__________年)的乙方承担如下交通费用补贴:

13.1甲方为乙方提供来北京赴任和离任回国的交通补贴。补贴额为北京至乙方赴任前居留地最近距离之经济舱机票届时市场实际价格,由甲方确认具体价格并有解释权。

13.2来华赴任交通费补贴在乙方完成第一个合同年前两_______月内发放。离任交通费补贴在乙方完成最后一个合同________年前________月内发放。

第十四条若试用期考核未通过,或者双方在试用期内即通知对方解除合同,则甲方不为乙方提供任何交通费用补贴;来华赴任时若由甲方购买了机票,则乙方必须退回甲方为其支付的机票款。

第十五条休假

15.1乙方享受中国公民法定带薪节日休假:元旦、春节、清明节、国际劳动节、端午节、国庆节、中秋节以及法律、法规规定的其他节假日。

15.2如乙方试用期考核通过,可享受带薪年假。每一合同年内,乙方可最多休假15个工作日。但乙方休假要在工作情况允许的条件下经所在部门领导批准。

15.3如果乙方按其国籍和信仰在圣诞节、宰牲节(古尔邦节)、开斋节和泼水节等节________日休假,则要相应扣减其带薪________年假。休假时间超过乙方按照15.2条规定可以享受的带薪________年假的,超过的时间按照事假处理。

15.4乙方连续聘用期限两________年以上(含两________年),并通过每________年的合同________年度的工作考核,自第二________年起每合同________年可根据国籍地区享受探亲交通补贴,探亲交通补贴额度由甲方确定,参见13.1。

15.5探亲交通补贴在乙方履行续签合同半________年后方可领取。若乙方续签合同执行不满半________年即提前解除合同,则甲方不提供探亲交通补贴。

15.6乙方所领取的赴任和离职交通补贴以及探亲交通补贴都要按照中国税法的规定,由甲方在发放时代为扣缴税款。

六、工作纪律和奖惩

第十六条工作纪律

16.1乙方应遵守国家的法律、法规。

16.2乙方须向甲方汇报工作情况,并在工作范围内接受甲方所有的合理指示。

16.3乙方应遵守甲方规定的各项规章制度和聘用纪律,自觉服从甲方的管理。甲方经过合法程序在本合同签订之前及履行期间不时制定并通过的规章制度和聘用纪律均为乙方应当遵守的范围。

16.4乙方应当认真学习甲方的企业文化、爱岗敬业、遵守职业道德、努力钻研业务、不断进取;应当积极参加乙方组织的各种培训,提高职业技能。

第十七条奖励和惩处

17.1甲方按有关规定,对乙方的工作实绩及贡献大小进行考评,并可适当地予以奖励。具体奖励办法见甲方的规章制度。

17.2乙方如果违反甲方的规章制度、聘用纪律以及本合同的有关规定,甲方将进行批评教育、经济处罚,直至解除本合同,并不支付任何补偿费用。

第十八条病假和事假

18.1乙方请病假,须凭社保定点医院的医生证明。乙方在一个合同________年度内,累计病假不超过15天(工作________日),工资按照100%发放;超过15天至最长三个________月的,病假期间工资按不低于北京市最低工资标准的80%发放;超过法定医疗期期限的(累计休病假超过三个________月的,医疗期计算含其中的休息________日、法定节假________日),甲方有权解除合同。法律有其它特殊规定的,则遵循其它特殊规定。病假可用带薪________年假抵消。病假期间不发奖金。

18.2乙方请事假须经甲方同意,首先要用________年假顶替事假。事假超出________年假的部分,甲方将按________日扣发工资。一个合同________年度内,事假超出年假的部分累计不得超过10天,连续事假不得超过3天。每超过1天,将扣发当天工资。连续事假如超过3天,则还要扣除当月全部奖金。奖金的发放则按照奖金考核规定执行。

第十九条旷工、违纪处理

19.1乙方未经甲方同意而擅离职守,按旷工处理。旷工1天,将扣发3天的奖金;旷工超过3天,将扣发当月全部奖金。

19.2有下列情况之一的,甲方有权解除合同,并追究乙方的违约责任:

19.2.1连续旷工达7天的;

19.2.2一个合同年度内,累计旷工达15天的;

19.2.3严重违反安全播出规章制度,给甲方工作造成重大影响的其它情形;

19.2.4严重违反甲方劳动纪律和规章制度的其他行为。

19.3乙方出现19.2约定情形,给甲方造成经济损失和重大损害

的,应当向甲方承担赔偿责任。

第二十条保密

20.1乙方对甲方负有保密义务。乙方须遵守甲方有关保密的规章制度,服从甲方的保密管理,包括但不限于涉密文件的保存、传递、使用、销毁等。

20.2乙方因工作接触到的凡注有内部资料、秘密、机密、绝密等字样的文件以及预发稿等均属于涉密文件,乙方不得违反规定自行传播,也不得以任何方式向任何第三方泄露或允许任何第三方使用,传播的方式包括但不限于复制、发送电子邮件、携带密件、密品到公共场所、在公共场所谈论涉密文件的内容等。

20.3乙方违反保密义务,除赔偿甲方因此造成的损失外,应按照相关法律法规承担相应的法律责任。

20.4乙方保密义务的期限不受本合同期限的限制,自乙方知悉涉密文件时开始,至涉密文件脱密时或者涉密文件已进入公共信息领域时终止。

七、合同的变更、终止、解除

第二十一条聘用合同的变更

21.1本合同依法签订后,合同双方必须全面履行合同规定的义务,任何一方不得擅自变更合同。

21.2甲、乙双方经协商一致,可以变更本合同;双方未达成一致意见的,本合同继续有效。

21.3本合同履行过程中,由于国家和河北省新颁布的法律、法规、政策发生变化,使本合同的部分条款无法继续履行的,本合同应当根据法律、法规、政策进行调整变更。

21.4本合同履行过程中,由于客观情况发生重大变化,致使本合同无法继续履行的,经双方协商一致,可以变更本合同。

21.5合同一方依据第21.2项及第21.4项的约定,要求变更本合同的,应将变更要求书面通知另一方,另一方应在_______日内(含________日)书面答复对方;15日内未答复的视为不同意变更本合同。

第二十二条聘用合同的终止

22.1符合下列情形之一的,聘用合同即自行终止:

22.1.1聘用合同约定的期限届满,双方没有续签聘用合同的。

22.1.2乙方达到法定退休年龄的。

22.1.3乙方死亡或者被人民法院依法宣告死亡或者宣告失踪的。

22.1.4甲方依法破产、解散、被吊销营业执照或者被责令关闭的。

22.1.5法律、法规规定的聘用合同终止的其他情形。

22.2本合同期限届满终止的,甲方应当提前X日书面通知乙方。

22.3法律规定终止聘用合同应支付经济补偿金的,甲方应按照法律规定支付经济补偿金。补偿金计算标准按本合同29.1条规定执行。

第二十三条聘用合同的解除

23.1经甲、乙双方协商一致,可以解除本合同。

23.2乙方有下列情形之一的,甲方可以随时解除聘用合同,不支付任何解除合同的费用:

23.2.1在试用期内被证明不符合条件的。

23.2.2严重违反工作纪律或者甲方规章制度的。

23.2.3严重失职、营私舞弊、对甲方利益造成重大损害的。

23.2.4被依法追究刑事责任、行政拘留、司法拘留、强制戒毒的。

23.2.5被证明有欺诈行为、隐瞒与本合同以及工作有关的重大事实的。

23.3有下列情况之一的,甲方可以解除聘用合同,但应提前________日以书面形式通知乙方:

23.3.1乙方患病或者非因工负伤,医疗期满后不能从事原工作也不能从事甲方安排的其他工作或者不符合国家和河北省从事有关行业、工种岗位规定,甲方无法另行安排工作的。

23.3.2乙方不能胜任工作,经培训或调整工作岗位,仍不能胜任工作的。

23.3.3乙方有违约行为而未在72小时内补救的。

23.3.4单位根据经营状况或调整生产经营管理而简编裁员的。

23.3.5本合同订立时所依据的客观情况发生重大变化,致使本合同无法履行,经甲乙双方协商不能就变更聘用合同达成协议的。

23.3.6本合同期限届满后双方未续订聘用合同而形成事实聘用关系,双方就续订聘用合同期限及条件不能达成一致的。

23.4乙方解除本合同的,应当提前_________日以书面形式通知甲方,试用期内乙方解除本合同的,应当提前十天通知甲方。经甲方批准后,乙方应当按照甲方规定办理离职交接手续并结清有关费用、违约金。

23.5符合下列情形之一的,乙方可以随时以书面形式通知甲方解除本合同:

23.5.1在试用期内;

23.5.2甲方有欺诈行为导致乙方签订本合同的;

23.5.3甲方未按照本合同约定支付乙方聘用报酬或者提供聘用条件的。

23.6乙方依照本合同23.4条解除本合同,给甲方造成经济损失的,应承担赔偿责任的。

23.7乙方有下列情形之一的,甲方不能依据本合同23.3条解除或者终止本合同:

23.7.1乙方患职业病或因工负伤、被确认丧失或部分丧失劳动能力的。

23.7.2乙方患病或者非因工负伤、在法律规定医疗期内的。

23.7.3女员工在孕期、产期、哺乳期的。

23.8本合同23.3所述提前三十天通知的期限,甲方可以以支付________月工资作为代通知金的方式替代。代通知金在与乙方结算时一并支付。甲方支付代通知金解除聘用合同的,聘用合同自甲方通知之日或者甲方确定的日期解除。

23.9在本合同约定的解除合同通知期内,甲方有权要求乙方继续工作,乙方应当按照本合同约定和甲方的要求完成甲方安排的工作。

23.10在本合同约定的解除合同通知期内,乙方继续为甲方工作的,甲方应根据乙方的工作情况支付乙方相应的工资。甲方要求乙方继续工作而乙方未工作的,甲方可以不支付乙方工资。

第二十四条离职交接和财产返还

24.1本合同终止或者解除时,乙方必须按照甲方要求办理离职交接手续。如因为乙方交接不当、拒绝交接、交接不完整而造成甲方损失的,乙方应当承担赔偿责任。

24.2乙方应立即返还其使用或占有的合法属于甲方的一切文件和其他物品。

24.3在乙方办理完毕离职交接手续之后,甲方应当支付依据法律规定或依据本合同约定承担的有关费用,并出具离职证明。

八、聘用合同的续订

第二十五条本合同的续订

25.1本合同期限届满前,甲、乙双方应当就本合同是否续订进行协商。甲、乙双方同意续订本合同的,应当在本合同期限届满前签订书面协议。

25.2本合同期限届满前____日,如乙方有意续订合同,可向甲方提出续订本合同的申请,双方同意续订后办理合同续订手续。

第二十六条本合同续订期限

26.1本合同续订期限原则上不少于本合同期限,双方另有约定除外。

26.2本合同期限届满后,因甲、乙双方未办理终止或者续订手续而形成事实聘用关系的,甲方应当及时与乙方协商续订聘用合同。双方对于期限及聘用合同其他条件不能协商一致的,双方均可提前三十天向对方提出解除事实聘用关系,提出解除的一方应当依法承担法律责任。

九、违反和解除聘用合同的法律责任

第二十七条违约责任的原则

27.1任何不适当、不按时、不全面履行本合同全部或者部分义务的行为,都构成违约行为,应当承担违约责任。

27.2关于违反合同的任何违约责任,合同双方同意违约方应向守约方按国家有关法规赔偿经济损失。

27.3本合同到期终止,除法律另有规定外,双方均不承担违约责任和赔偿责任。

第二十八条乙方的违约责任

28.1甲方出资培训的乙方,违反本合同约定解除合同的赔偿标准为:以甲方出资额为限,每服务满_______年(自培训完成之日或者双方另行约定之日起计算)递减20%,不满一年的不递减。乙方签订了培训协议的,按照培训协议执行。

28.2乙方提前解除合同给甲方造成的损失,乙方应当承担赔偿责任。乙方的合同尚未到期,又不符合23.4条和23.5条所列的解除条件,而单方面解除合同或擅自离职的,乙方应当向甲方支付违约金。

28.2.1乙方在试用期结束后工作未满________月而向甲方提出解除合同或擅自离职的,乙方应当向甲方支付20__美元违约金。

28.2.2乙方在试用期结束后工作已满________月未满________月期间向甲方提出解除合同或擅自离职的,乙方应当向甲方支付1500美元违约金。

28.2.3乙方在试用期结束后工作已满________月未满________月期间向甲方提出解除合同或擅自离职的,乙方应当向甲方支付1000美元违约金。

28.2.4乙方在离合同期届满________月内向甲方提出解除合同或擅自离职的,乙方应当向甲方支付500美元违约金。

28.3除前述第28.1、28.2项约定的违约金外,乙方提前解除本合同的,甲方为乙方付出的健康复检费、在华居留许可办理费用、招聘费用,包括支付给第三方、乙方、乙方原工作单位等单位和人员的费用,乙方应当全额给予赔偿。

28.4乙方违反保守商业秘密事项给甲方造成经济损失的,应当承担赔偿责任。

28.5乙方未履行本合同约定的其他义务造成甲方经济损失的,应给予赔偿。

28.6乙方违约提前解除合同,则甲方不支付本合同年的任何交通费用补贴;若甲方已经为乙方来华赴任提供了机票,则乙方须退回机票款;甲方不出具推荐信。

第二十九条甲方的违约责任

29.1甲方依据本合同23.3条解除本合同的,应当按照国家和河北省的有关规定支付乙方解除合同经济补偿金。补偿金以乙方在甲方的连续工作年限和乙方离职前十二个月平均工资为基础(超过政府部门公布的本市职工平均工资三倍的按三倍计算),按照每满一年(十二个自然月)支付一个月平均工资的标准给付,超过六个月不满一年的按照一年计算,不满六个月的支付半月工资。但补偿金最多不超过乙方十二个月工资,法律另有规定的除外。

29.2甲方未按照本合同约定向乙方提供聘用条件、支付聘用报酬的,应当依照国家和河北省规定承担赔偿责任。

十、双方约定的其他内容

第三十条通知及送达

30.1本合同中载明的单位地址和永久通讯地址为双方履行本合同的唯一有效且能够送达之地址,任何一方地址发生变更,应当以书面方式通知对方。没有履行通知义务的,对方向本合同列明的单位地址或永久通讯地址送达文件视为通知已经送达。

30.2本合同履行过程中,任何涉及本合同履行、变更、解除、终止、义务豁免、追索等都应当采取书面形式通知,包括但不限于传真、文件、协议、普通信函、挂号信函、特快专递、电报、公告等。

30.3通知可以传真、当面送达、邮寄送达、公告送达的形式进行送达。以传真方式送达通知的,视发送当日为送达日。以当面送达的,以签字收取时间为送达时间。以特快专递送达的,以特快专递送达签收时间为送达时间。电报方式送达通知的,以电报发出之________日起第________日为送达时间。公告送达的,以公告发布之日起第________日为送达时间。

30.4由于通知发出一方的原因造成通知发出的地址或者传真号码错误,导致通知不能送达或者延迟送达的,以通知发出方更正地址或者传真号码并重新进行送达之日开始计算送达期限。

第三十一条双方约定的其他内容

31.1乙方在为甲方工作期间,因完成本职工作,或利用甲方物质条件,或以甲方工作人员名义,而形成的作品版权由甲方享有,乙方只享有署名权。

31.2乙方来华赴任机票。

十一、聘用争议处理

第三十二条聘用争议处理

甲乙双方在本合同履行过程若发生争议,首先由争议双方协商解决。协商不能解决的,由争议一方向人事争议仲裁委员会申请仲裁。

第三十三条法律适用

33.1与本合同及附件有关的履行、协商、争议解决之程序和实体法律均适用中国法律。

33.2本合同及附件条款及内容如与国家法律、法规相抵触时,以国家法律、法规为准。

十二、附则

第三十四条合同文本

本合同一式四份,用中文书就。若乙方需要英文翻译件,可向甲方索取。但英文翻译件只供参考,不具法律效力。

第三十五条本合同的附件

35.1岗位职责。(由甲方用人部门和乙方另行签署)

35.2其他附件:____________。

第三十六条本合同的生效

本合同自中国国家广播电影电视总局批准后生效。

第三十七条本合同的解释

本合同及附件的内容及条款由甲方外籍人员管理部门解释。

(以下无正文)

甲方:____________乙方:____________

时间:____________时间:____________

乙方签收:____________时间:____________

展开阅读全文

篇19:技术服务协议合同范本_合同范本

范文类型:合同协议,适用行业岗位:技术,服务,全文共 928 字

+ 加入清单

技术服务协议合同范本

合同(或合约)(covenants),是双方当事人基于对立合致的意思表示而成立的法律行为,为私法自治的主要表现,意指盖印合约中所包含的合法有效承诺或保证。本文是关于技术服务协议合同范本,仅供大家参考。

委托方(以下称甲方):_________

法定代表人或负责人:__________

服务方(以下称乙方):_________

法定代表人或负责人:__________

经双方协商一致,订立本合同。

第一条 项目名称:_______

(注:本参考格式可以应用于产品设计、工艺编制、测试分析、计算机程序编制、工程计算等辅助性技术服务活动)。

第二条 甲方的主要义务

1.在合同生效后____日内向乙方提供下列技术资料、数据、材料、样品:

_____。

2.在接到乙方关于要求改进或更换不符合合同约定的技术资料、数据、材料、样品的通知后___天内、及时做出答复;

3.按约向乙方支付报酬_____元,支付方式如下:

合同生效后____日内向乙方支付报酬总额的_____%;

合同履行完成后(验收合格之日起)_____日内向乙方支付全部报酬余额。(注:双方可约定由乙方实报实销或包干使用等方式)

乙方开户银行帐户为_____。

4.协助乙方完成下列配合事项:_______。

第三条 乙方的主要义务

1.在____年__月__日前完成技术服务工作;

2.依照下列技术经济指标完成技术服务工作____。

3.发现甲方提供的技术资料、数据、样品、材料或工作条件不符合合同约定时,应在合同生效后___天内通知委托方改进或者更换;

4.应对甲方交给的技术资料、样品等妥善保管;在合同履行过程中,如发现继续工作对材料、样品或设备等有损坏危险时,应中止工作,并及时通知委托方;工作完成后应归还上述技术资料、样品,不得擅自存留复制品。

第四条 保密条款

甲乙双方应对各自提供的下列技术资料、数据承担保密义务:______。

保密期限为:_____。

第五条 技术成果收益归属

在履行本合同中,甲方利用乙方提供的技术资料和工作条件完成的新的技术成果,属于甲方所有,乙方利用甲方提供的技术资料和工作条件完成的新的技术成果,属于乙方所有。(注:当事人还可以有其他不同的约定)

甲方:

乙方:

丙方:

二零xx年xx月xx日

展开阅读全文

篇20:知识产权技术引进合同样本_合同范本

范文类型:合同协议,适用行业岗位:知识产权,技术,全文共 2106 字

+ 加入清单

知识产权技术引进合同样本

在二十一世纪,知识产权与人类的生活息息相关,到处充满了知识产权,在商业竞争上我们可以看出他的重要作用。今天第一范文网小编将与大家分享:知识产权技术引进相关合同样本。以下内容仅供参考,欢迎阅读!

知识产权技术引进合同

1.格式

×××技术引进合同

第一条

甲方为转让方(写明甲方的基本情况);乙方为受让方(写明乙方的基本情况)

第二条

甲方转让技术的内容

(写明转让技术的名称、范围、技术指标及技术资料等技术条件。合同中应当明确规定技术对象、目标、内容、工艺过程、工艺要求技术参数、技术资料等。)

第三条

技术转让方式(是独家转让还是普通许可,要在合同中订明)

第四条

价格及支付条款(要写明价格条件,用何种货币作为支付手段,在什么阶段支付等内容)

第五条

技术验收条款(要写明技术验收包括技术资料的验收和产品考核验收。通常要规定验收的时间、地点、次数、人员标准和费用等方面的内容。)

第六条

技术及其权利保证条款(写明该技术的各种指标和先进程度,对涉及到专利权等技术权利要作出相应的承诺,以确保引进的技术不发生权益纠纷。)

第七条

技术培训和技术服务条款(写明技术培训的内容,通常包括培训的人数、专业、时间和期限,培训的内容、方法和要求。技术服务通常包括技术指导、技术服务的专业人员的专业、人数、级别和工作时间等。)

第八条

技术保密条款(应明确技术保密范围和期限。保密期一般是不超过合同的有效期限。)

第九条

受让方权利条款(写明受让方对技术的使用权、制造权、销售权及出口的规定、权利行使的范围和条件等内容。)

第十条

不可抗力事件及免责条件(不可抗力条款主要包括不可抗力的范围,后果,处理及免责范围。不可抗力一般应为当事人在订立合同时不能预见,对其发生的后果不能避免并不能克服的事件。不可抗力事件又可分为两类,即自然原因引起的不可抗力和社会原因引起的不可抗力。合同中必须对这些问题加以明确规定。)

第十一条

违约责任条款(包括违约构成、违约补救、索赔方式、争议解决方式等内容。)

第十二条

争议解决及法律适用

凡因执行本合同所发生的或与本合同有关的一切争议,双方应通过友好协商解决;如果协商不能解决,应提交北京中国国际贸易促进委员会对外经济贸易仲裁委员会,根据该会的仲裁程序暂行规则进行仲裁。仲裁裁决是终局的,对双方都有约束力。

仲裁依据中国的法律裁决当事人之间的纠纷争议。

第十三条

合同的生效期限和终止

第十四条

合同的变更和解除

(写明合同变更和解除的条件)

第十五条

合同文本使用中文和英文(其他文字亦可)两种文本。如有不同,以中文为准。

第十六条

本合同未尽事宜,双方协商签订补充协议。补充协议与本合同具有同等效力。

甲方:(章)

乙方:(章)

法定代表人:(签字)

法定代表人:(签字)

2.说明

技术引进合同是指在中华人民共和国境内的公司、企业、团体或个人(受方)为引进技术同中华人民共和国境外的公司、企业、团体或个人(供方)订立的明确相互权利义务关系的协议。根据《技术引进合同管理条例》及其实施细则的规定,签订技术引进合同应当注意的问题有:

(1)要列明合同的基本情况,包括合同名称、当事人姓名(或名称)、住所(或法定地址)、国籍、签订时间和地点。合同名称要能够确切地反映出该合同的性质、特点和内容,便于人们对整个合同进行了解。当事人名称(或姓名)要与实际承担合同权利义务的单位或个人相一致,是我方与外方某一总公司的子公司签订时更应注意此问题。当事人法定地址(或住所)、签约的地点往往成为交付技术资料的地点,还可能成为合同发生争议进行仲裁或诉讼的仲裁地点或法律诉讼地点,因此应该明确、具体。

(2)要界定合同中所使用的关键词语的含义。合同中所使用的关键词语,可用定义条款加以说明。技术引进合同的双方当事人所属国家不同、语言不同、法律不同,为防止合同执行过程中可能发生分歧,有必要对那些容易混淆的词语,如专有技术、技术资料、质量标准、净销售额、技术改进等用定义的方式加以明确和具体说明。

(3)技术引进合同应贯彻平等互利的原则,未经审批机关特殊批准,合同不得有下列限制性条款:①要求受方接受同技术无关的附带条件,包括购买不需要的技术、技术服务、原材料、设备或产品;②限制受方自由选择从不同来源购买原材料、零部件或设备;③限制受方发展和改进所引进的技术;④限制受方从其他来源获得类似技术或与之竞争的同类技术;⑤双方交换改进技术的条件不对等;⑥限制受方利用引进的技术生产产品的数量,品种或销售价格;⑦不合理地限制受方的销售渠道或出口市场;⑧禁止受方在合同期满后,继续使用引进的技术;⑨要求受方为不使用的或失效的专利支付

付报酬或承担义务。

(4)引进的技术要符合法律规定的条件,否则合同无效。关于引进的技术应当符合的条件,《技术引进合同管理条例》第3条明确规定,必须先进适用,并且应当符合下列一项以上的要求:①能发展和生产新产品;②能提高产品质量和性能,降低生产成本,节约能源或材料;③有利于充分利用本国的资源;④能扩大产品出口,增加外汇收入;⑤有利于环境保护;⑥有利于生产安全;⑦有利于改善经营管理;⑧有助于提高科学技术水平。当事人在签订合同时,应当注意是否符合这些要求。

展开阅读全文