机械制造技术员是干什么的（推荐20篇）

编号：

甲方：________________

经营地址为：

邮政编码：

乙方：________________

经营地址为：

邮政编码：

鉴于：

1.甲方与乙方进行技术及业务合作事宜，双方将以书面或口头形式要求对方提供，并将拥有或已经拥有对方某些非公开的、保密的、专业的信息和数据;

2.双方愿以本协议规定对本协议项下的保密信息承担保密义务。

为此，双方达成协议如下：

第一条 定义

保密信息：指提供方向接受方提供的，属于提供方或其股东及其他关联公司所有或专有的，或提供方负有保密义务的有关第三方的下列资料及所有在信息载体上明确标示“保密”的材料和信息。需保密材料包括但不限于：集成电路设计版图数据、业务记录和计划、贸易机密、技术资料、产品项目、产品设计信息、价格结构、成本等非公开的、保密的或专业的信息和数据。

第二条 保密信息不包括以下信息：

1.在接受保密信息之时，接受方已经通过其他来源获悉的、无保密限制信息;

2.一方通过合法行为获悉已经或即将公诸于众的信息;

3.根据政府要求、命令和司法条 例所披露的信息。

第三条 接受方在接受保密信息后，必须承担以下义务：

1.对保密信息谨慎、妥善持有，并严格保密，没有提供方事先书面同意，不得向任何第三方披露;

2.接受方仅可为双方合作之必需，将保密信息披露给其指定的第三方公司，并且该公司应首先以书面形式承诺保守该保密信息;

3.接受方仅可为双方合作业务之必需，将保密信息披露给其直接或间接参与合作事项的管理人员、职员、顾问和其他雇员，但应保证该类有关人员对保密信息严格保密;

4.若具有权力的法庭或其他司法、行政、立法机构要求乙方披露保密信息，接受方将立即通知提供方此类要求;若接受方按上述要求必须提供保密信息，接受方将配合提供方采取合法及合理的措施，要求所提供的保密信息能得到保密的待遇;

5.若接受方或有关人员违反本协议的保密义务，接受方须承担相应责任，并赔偿提供方由此造成的损失。

第四条 没有得到另一方的书面同意，任何一方不得将其在本协议书项下的权利和义务转让给第三方。

第五条 双方同意，本协议生效后，如国家颁布有关产权资料的出口、再出口的法律法规与管理条 例，双方有义务遵守这些法律法规与管理条 例。

第六条 本协议的各部分构成完整的保密协议，并取代双方此前任何有关本协议所述事项的理解或协议。未经他方书面同意，本协议不得变更或修改。

第七条 双方承认并同意，除提供方以书面形式明确表达外，提供方向接受方披露保密信息并不构成提供方向接受方转让或授予接受方享有提供方对其商标、专利、技术秘密或其他知识产权拥有的利益，亦不构成向接受方转让或其他知识产权等有关利益。

第八条 本协议接受中国法律管辖并按中国法律解释。对因本协议项下各方的权利和义务而发生的有关的任何争议，双方应首先协商解决，如无法通过协商解决，则应在苏州仲裁解决。

第九条 本保密协议自双方授权代表签署之日起生效，且在双方合作期间和合作结束完成之后_____年内持续有效。

第十条 本协议一式二份，具有同等效力，双方各持一份。

甲方：________________________________

________________________

乙方：________________________________

_______________________

甲方：_________

乙方：_________

甲方根据工作需要和乙方的工作业绩表现，推荐乙方参加_________省高级专业技术职务评审。经甲乙双方同意，达成如下协议：

一、甲方的权利与义务：

1.乙方取得正高或副高专业技术职务资格后，甲方在乙方履行相应职责的前提下予以聘任。

2.保证乙方在聘任后享受甲方规定的高级专业技术职务人员有关待遇。

二、乙方的权利与义务：

1.乙方取得正高或副高专业技术职务后，必须在甲方工作5年以上，须与甲方签订聘用合同书。

2.被聘用后，享受甲方规定的高级专业技术职务人员有关待遇。

三、违约责任：

乙方在服务期内不得提出调离甲方，甲方有权不予批准。若乙方强行调离甲方，乙方需按所欠服务年限赔偿违约金，正高每年承担_________元违约金，并收回新评教授慰问金_________元，副高每年承担_________元违约金。

四、本协议一式二份，甲乙双方各持一份，经双方签字后生效。

甲方(盖章)：_________ 乙方(签字)：_________

负责人(签字)：_________

_________年____月____日 _________年____月____日

委托方(甲方):____________受托方(乙方):______________

住所地:___________________住所地:___________________

法定代表人:_______________法定代表人:_________________

项目联系人:________________项目联系人:__________________

通讯地址:__________________通讯地址:_____________________

本合同甲方委托乙方就_________________________________________________项目进行________________________的专项技术服务，并支付相应的技术服务报酬。双方经过平等协商，在真实、充分地表达各自意愿的基础上，根据法律的规定，达成如下协议，并由双方共同恪守。

第一条 _甲方委托乙方进行技术服务的内容如下:

1、技术服务的目标:____________________________________

__________________________________________________________

__________________________________________________________

__________________________________________________________

________________________________________________________。

2、技术服务的内容:____________________________________

___________________________________________________________

__________________________________________________________

__________________________________________________________

________________________________________________________。

3、技术服务的方式:____________________________________

__________________________________________________________

_______________________________________________________。

第二条 乙方应按下列要求完成技术服务工作:

1、技术服务地点:_____________________________________;

2、技术服务期限:_____________________________________;

3、技术服务进度:_____________________________________

__________________________________________________________

________________________________________________________;

4、技术服务质量要求:________________________________;

5、技术服务质量期限要求:____________________________。

第三条 为保证乙方有效进行技术服务工作，甲方应当向乙方提供下列工作条件和协作事项:

1、提供技术资料:

(1)__________________________________________________;

(2)__________________________________________________;

(3)__________________________________________________;

(4)__________________________________________________。

2、提供工作条件:

(1)__________________________________________________;

(2)__________________________________________________;

(3)__________________________________________________;

(4)__________________________________________________。

3、其他:_______________________________________________

________________________________________________________。

4、甲方提供上述工作条件和协作事项的时间及方式:________

________________________________________________________。

第四条 甲方向乙方支付技术服务报酬及支付方式为:

1、技术服务费总额为:_________________________________;

2、技术服务费由甲方______________(一次或分期)支付乙方。

具体支付方式和时间如下:

(1)__________________________________________________;

(2)__________________________________________________;

(3)__________________________________________________。

乙方开户银行名称、地址和帐号为:

开户银行:____________________________________________

地址:________________________________________________

帐号:________________________________________________

第五条 双方确定因履行本合同应遵守的保密义务如下:

(一)甲方:

1、保密内容(包括技术信息和经营信息):_________________

_________________________________________________________

_________________________________________________________。

2、涉密人员范围:______________________________________

________________________________________________________。

3、保密期限:__________________________________________

_________________________________________________________。

4、泄密责任:_________________________________________

________________________________________________________。

(二)乙方:

1、保密内容(包括技术信息和经营信息):_________________

__________________________________________________________

_________________________________________________________。

2、涉密人员范围:______________________________________

________________________________________________________。

3、保密期限:__________________________________________

________________________________________________________。

4、泄密责任:___________________________________________

________________________________________________________。

第六条 本合同的变更必须由双方协商一致，并以书面形式确定。但有下列情形之一的，一方可以向另一方提出变更合同权利与义务的请求，另一方应当在内予以答复;逾期未予答复的，视为同意。

1、__________________________________________________;

2、___________________________________________________;

3、__________________________________________________;

4、__________________________________________________。

第七条 双方确定以下列标准和方式对乙方的技术服务工作成果进行验收:

1、乙方完成技术服务工作的形式:_______________________

_________________________________________________________

_______________________________________________________。

2、技术服务工作成果的验收标准:_______________________

_______________________________________________________。

3、技术服务工作成果的验收方法:_______________________

_______________________________________________________。

4、验收时间和地点:_________________________________。

第八条 双方确定:

1、在本合同有效期内，甲方利用乙方提交的技术服务工作成果所完成的新的技术成果，归________(甲、双)方所有。

2、在本合同有效期内，乙方利用甲方提供的技术资料和工作条件所完成的新的技术成果，归________(乙、双)方所有。

第九条 双方确定，按以下约定承担各自的违约责任:

1、____方违反本合同第_____条约定定，应当____________

____________________(支付违约金或损失赔偿的计算方法)。

2、____方违反本合同第_____条约定定，应当____________

____________________(支付违约金或损失赔偿的计算方法)。

3、____方违反本合同第_____条约定定，应当____________

____________________(支付违约金或损失赔偿的计算方法)。

4、____方违反本合同第_____条约定定，应当____________

____________________(支付违约金或损失赔偿的计算方法)。

第十条 双方确定，在本合同有效期内，甲方指定______________为甲方项目联系人，乙方指定______________为甲方项目联系人。项目联系人承担以下责任:

1、__________________________________________________;

2、__________________________________________________;

3、___________________________________________________。

一方变更项目联系人的，应当及时以书面形式通知另一方。未及时通知并影响本合同履行或造成损失的，应承担相应的责任。

第十一条 双方确定。出现下列情形，致使本合同的履行成为不必要或不可能的，可以解除本合同:

1、发生不可抗力;

2、__________________________________________________;

3、__________________________________________________。

第十二条 凡因执行本合同所发生的或与本合同有关的一切争议，双方应通过友好协商解决。如双方通过协商不能达成协议时，则应提交中国国际经济贸易仲裁委员会华南分会，按照申请仲裁时该会现行有效的仲裁规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。

第十三条 双方确定:本合同及相关附件中所涉及的有关名词和技术术语，其定义和解释如下:

1、__________________________________________________;

2、___________________________________________________;

3、__________________________________________________;

4、__________________________________________________;

5、__________________________________________________。

第十四条 与履行本合同有关的下列技术文件，经双方以___________________________________________方式确认后，为本合同的组成部分:

1、技术背景资料:____________________________________;

2、可行性论证报告:__________________________________;

3、技术评价报告:____________________________________;

4、技术标准和规范:__________________________________;

5、原设计和工艺文件:________________________________;

6、其他:______________________________________________。

第十五条 双方约定本合同其他相关事项为:______________

__________________________________________________________

___________________________________________________________

___________________________________________________________

________________________________________________________。

第十六条 本合同一式______份，具有同等法律效力。

第十七条 本合同经双方签字盖章后生效。

甲方:__________________ 乙方:__________________

法定代表人/委托代理人:_____ 法定代表人/委托代理人:________

________年___月____日 ________年___月____日

_____技术状况保证书

一、严格遵守《中华人民共和国道路交通安全法》、《中华人民共和国道路运输条例》等法律法规，保证所承包_____和所驾驶_____技术状况良好。

二、认真遵守集团“_____承包营运者和驾驶员为保证_____技术状况关良好的.第一责任人”的规定，保证严格落实出车前、行车中、收车后的_____三检制度，严守操作规程，做到检查到位、杜绝隐患。

三、严格按行业管理要求，进行_____年检、技术等级评定、二级维护、_____类型等级核定(复核)、日常例保检查以及春运检审等，保证不逾期、不漏项，保证检验不合格不参加营运。

四、严格按行业管理要求，保证所承包营运_____和所驾驶_____只到具有客运_____维修资质的修理厂进行_____维修保养。

五、在上岗出车前认真检查_____制动和转向等各系统技术状况是否良好，确保_____各部机件安全可靠，保证杜绝驾驶带病_____上路行驶，保证不出机械事故。

六、做好_____日常维修保养工作，凡发现_____安全性能不合格，立即停驶修复。

七、保证灭火器、故障牌、三角木等随车安全设施齐全有效。

八、如因违反以上保证内容导致交通事故或其它纠纷的，本人自愿承担一切法律和经济责任;并同意公司取消驾驶员内部准驾资格，自愿由公司收回承包营运资格。

营运线路(营运范围)：

此致

敬礼

保证人

车牌号码：

20_________年_________月_________日

技术合同：农业技术服务合同

合同(contract)，又称为契约、协议，是平等的当事人之间设立、变更、终止民事权利义务关系的协议。下面请看“技术合同：农业技术服务合同”一文：

技术合同：农业技术服务合同

甲方：_________

乙方：_________

为了发展农村商品生产，提高_________生产的技术水平，提高经济效益，经甲乙双方充分协商，特签订本合同，以便双方共同遵守。

一、应甲方邀请，乙方到甲方居住地传授_________生产的技术，合同期限为_________年_________月，即从_________年_________月_________日起至_________年_________月_________日止。

二、至合同期满，乙方保证甲方达到如下技术水平：_________。

三、甲方负责提供乙方传授_________生产技术所必需的资金_________元，提供生产设备_________，保障_________原料的及时供应.甲方应严格服从乙方的技术指导。

四、在合同执行期间，甲方每月付给乙方报酬_________元，按月结算(或合同期届满统一结算)。乙方的食宿由甲方负责安排，费用由_________方负担。

五、合同期届满，如乙方的传授指导没有达到合同规定的技术要求，除退回甲方付给的报酬，赔偿甲方的一切损失外，还应向甲方偿付违约金_________元。如乙方中止执行合同，除应赔偿甲方的一切费用支出外，应向甲方偿付违约金_________元。如甲方不按合同规定的时间付给乙方报酬，迟付一日，应按迟付金额的_________%偿付给乙方违约金.如甲方中止执行合同，应付给乙方合同期内的全部报酬。

六、合同生效后，任何一方不得任意变更或解除合同，合同中如有未尽事宜，须经甲乙双方共同协商，作出补充规定，补充规定与本合同具有同等效力。

七、如遇人力不可抗拒的灾害造成合同无法履行时，由双方协商解决。

八、其他：_________。

本合同正本一式两份，甲乙双方各执一份。(如经过公证)_________各留存一份。

甲方(签章)：_________ 乙方(签章)：_________

_________年____月____日 _________年____月____日

武汉市水平衡测试技术服务合同

委托方(甲方)：

住所地：

法定代表人：

项目联系人：

联系方式：

通讯地址：

电话：传真：

电子信箱：

受托方(乙方)：

住所地：

法定代表人：

项目联系人：

联系方式：

通讯地址：

电话：传真：

电子信箱：

根据《中华人民共和国民法典》的规定，(以下简称甲方)与(以下简称乙方)经过平等协商，在真实、充分地表达各自意愿的基础上，就甲方开展水平衡测试项目事宜达成如下协议，并由双方共同恪守。

第一条甲方委托乙方进行技术服务的内容如下：

1、技术服务要达到的目标：

按照《企业水平衡测试通则》(GB/T12452-20__)的要求，完成甲方委托的水平衡测试工作的全部事项，包括但不限于全面调查分析甲方的主要用水情况、用水(工艺)流程、供水、用水、排水、污水处理及回用情况，评价甲方用水水平,提出用水节水合理化建议，向甲方提供完整的书面报告。

2、技术服务的内容：

(1)整理统计甲方历年用水量、产量、产值情况、历年开展的节水技术改造以及其成效、目前安装的节水设施情况、工艺循环水量、间接冷却水量、锅炉蒸汽冷凝水量数据;

(2)调查甲方各用水(工艺)环节的用水情况、水循环利用情况、非常规水资源利用情况，制订用水网络图，并根据甲方用水特点和需求，提出用水节水管理和技术上的优化意见;

(3)调查甲方供水管网情况，绘制供水管网图;

(4)计算、分析、评价有关用水技术经济指标，根据甲方的用水现状挖掘节水潜力，提出建设性指导意见，对甲方节水管理提出建议，提高节水管理效率和水平。

甲乙双方可根据需要，增加下列技术内容中第项：

(1)调查甲方各用水(工艺)环节的水质情况，提出不同水质排水的综合利用建议;

(2)调查甲方各用水(工艺)环节的排水情况，并绘制排水、雨水管网图;

(3)对用水量较大的具有相对独立性的用水设备(单元)进行子系统的水平衡测试。

3、技术服务的方式：乙方进驻甲方现场进行调查和实测。

第二条乙方应按下列要求完成技术服务工作：

1、技术服务地点：。

2、技术服务期限：。

3、技术服务进度：

(1)______年____月____日——______年____月____日，开展准备工作，收集测试基础数据;

(2)______年____月____日——______年____月____日，现场实测;

(3)______年____月____日——______年____月____日，报告书编制;

(4)______年____月____日——______年____月____日，报告书送审，项目验收。

4、技术服务质量要求：符合《企业水平衡测试通则》(GB/T12452-20__)的要求。

第三条为保证乙方有效进行技术服务工作，甲方应当向乙方提供下列工作条件和协作事项：

1、提供技术资料：

(1)供水管网布置图、排水管网走向及计量水表安装情况;

(2)近三年的产品产量，用水总量，循环水量数据;

(3)节水管理机构、节水管理制度建设及节水技术改造资料;

(4)以及乙方需要的其它资料：

2、提供工作条件：

(1)提供水平衡测试工作委托书，同意乙方测试人员在甲方用水区域内开展与水平衡测试相关的勘测计量、调查了解、图像拍摄等活动;

(2)甲方应配备符合《用水单位水计量器具配备和管理通则》(GB24789-20__)相关要求的分类、分区域计量设施;若经乙方现场踏勘发现甲方计量设施缺失，甲方需于______年____月____日前予以完善。如因甲方计量不能如期完善，原因导致不能开展水平衡测试工作，乙方工作时间予以顺延;

(3)对乙方测试中遇到的问题予以协调和配合;

(4)按本合同约定的条款支付费用;

(5)其它需要甲方提供的条件：

3、经费的约定：

甲方为满足测试条件开展的管网测漏、计量水表完善等支出由甲方承担;乙方开展水平衡测试所必需的仪表仪器、实验工具、交通工具由乙方自行解决，完成项目所需的人工、差旅、印刷等支出由乙方自行承担。

第四条甲方向乙方支付技术服务报酬及支付方式为：

1、技术服务费总额为：人民币(小写)：，

(大写)：;

2、技术服务费由甲方(一次或分期)支付乙方。

具体支付方式和时间如下：

(1);

(2);

(3);

(4)。

3、乙方开户银行名称、地址和帐号为：

开户名：

开户行：

行号：

帐号：

4、在甲方付款的同时，乙方应开具相应金额的正规发票。

第五条双方确定以下列方式对乙方的工作成果进行验收：

1、乙方完成技术服务工作的形式：向甲方提交《水平衡测试报告书》一式份。

2、技术服务工作成果的验收标准：《企业水平衡测试通则》(GB/T12452-20__)。

3、技术服务工作成果的验收方法采用下列第项方式。

(1)甲方组织验收;

(2)通过武汉市节水监管机构技术验收。

第六条双方确定，在本合同有效期内，甲方指定为甲方项目联系人，乙方指定为乙方项目联系人。一方变更项目联系人的，应当及时以书面形式通知另一方。未及时通知并影响本合同履行或造成损失的，由责任方承担相应的责任。

第七条本项目的基础资料及成果归甲方所有，乙方对基础资料及成果负有保密责任，未经甲方许可，不得将其用于其它任何用途。在项目完成验收后，乙方应将获得的甲方基础资料归还甲方，不得擅自留存。

第八条双方确定，按以下约定承担各自的违约责任：

1、方违反本合同第条约定，应当

(支付违约金或损失赔偿额的计算方法)。

2、方违反本合同第条约定，应当

(支付违约金或损失赔偿额的计算方法)。

3、方违反本合同第条约定，应当

(支付违约金或损失赔偿额的计算方法)。

第九条双方因履行本合同而发生的争议，应协商解决。

协商不成的，双方均同意采取以下第种方式解决：

(1)提交仲裁委员会仲裁。

(2)依法向人民法院提起诉讼。

第十条本合同一式份，甲乙双方各持份，具有同等法律效力，经双方签字盖章后生效。

第十一条其它未尽事宜，甲乙双方可签订补充协议，补充协议与本合同同样有效。

(以下无正文)

甲方：(盖章)

法定代表人/委托代理人：(签名)

乙方：(盖章)

法定代表人/委托代理人：(签名)

签署时间：

国际技术服务合同 在____注册成立的____公司(以下简称甲方)和中国____公司(以下简称乙方)、于____年____月____日签订本技术服务合同：

第一条

1.应甲方邀请，乙方同意派遣____名工程师组成的中国技术服务组，于___年____月____日赴____(甲方国名)的____(市)(或某工地);

2.在____(甲方国名)，受甲方邀请的乙方中国技术服务人员应有准备，并且愿意同____甲方的____公司共同工作。

第二条 乙方人员在____(甲方国名)期间，应服从甲方国家的法律，受甲方的管理规章制度约束。

第三条

1.(1)甲方负责向乙方人员支付乙方提出的每人每月____(币别)的免税技术服务费。

(2)上述免税技术服务费的____%应以美元(或英镑)支付。

(3)本条(1)款提及的技术服务费自乙方人员到达____(甲方国名)之日起开始计算。

2.(1)在甲方服务期间，乙方人员在工作或业余的全部时间内，应保证行为端正。

(2)甲方对乙方人员在甲方服务期间的犯罪行为不承担责任。

第四条 甲方负担乙方人员往返中国和____(甲方国名)的国际旅费和每人不超过20公斤的超重行李费，并负责安排机票。

第五条

1.第三条1(1)款中所提的技术服务费的____%应以____币(即甲方的国币)支付给在____的中国服务组，其余____%应由甲方按银行当日公布的兑率折成美元(或英镑)。

2.所折成的美元(或英镑)应电汇____(如伦敦)中国银行转汇北京(或其它中国城市)中国银行营业部____公司(即乙方公司)____号帐户。

3.甲方应以书面形式将汇票情况通知中国驻甲方国大使馆经参处。

第六条 甲、乙双方执行合同期间，甲方同意：

1.为乙方技术服务组人员免费提供设备齐全的住宿;

2.为乙方技术服务组人员免费提供交通工具;

3.免费提供乙方必要和充分的劳保用品;

4.为乙方技术人员免费提供人寿保险;

5.为乙方技术服务人员免费提供足够的办公设施和用品;

6.在指定的医院或诊所为技术服务组人员提供免费医疗，但，不包括镶牙、配镜和性病的治疗。

7.乙方技术服务组人员因公出差，应按照甲方人员待遇，发给出差补助费，以____币(甲方国币)支付给乙方技术服务组。

第七条 合同期间，乙方技术人员享受中、____(甲方国名)两国的全部公共假日。

第八条

1.乙方人员每年享受三十天的休假，工资照发(从开始工作之日算起工作十一个月，第十二个月为休假)。

休假间工资应全部以美元(或英镑)支付。

2.乙方技术人员每年应得____元(甲方国币)的奖金，奖金的____%以美元(或英镑)支付。

3.在甲方服务期间，甲方为乙方技术人员回国休假提供往返经济舱机票。

第九条 甲方还同意为乙方人员办理移民手续，其中包括：

1.办理出入境签证;

2.为乙方人员办理合同规定雇用期间的长期居住许可;

3.承担本条1和2款所产生的费用。

第十条 在合同期间内，乙方技术人员由于家庭不幸和/或其它原因，可请紧急事假十天。

1.准予乙方人员事假时，甲方不负责： (1)乙方事假人员旅费; (2)本合同第三条1(1)款中所规定的技术服务费; (3)因乙方人员事假期满后不能返回____(甲方国名)而换人时所需费用。

2.乙方应负责： (1)从国内另行换人，替换不能返回甲方服务的技术人员; (2)承担换人所需的全部费用。

(3)因乙方人员事假期满后不能返回____(甲方国名)而换人时所产生的费用。

3.(1)在合同期间内，由于甲方或所在国原因，致使乙方人员不能工作时，甲方同意：向乙方技术人员支付双方同意的技术服务费(见第三条1(1)款); (2)因甲方原因终止合同、甲方违反合同或阻挠合同履行时，甲方同意： a.按合同规定费用，向乙方人员支付三个月的技术服务费(见第三条1(1)款); b.执行本合同第四条的规定。

第十一条

1.乙方技术人员因身体不好或工伤，在两个月内不能痊愈时，乙方同意： (1)从中国另行派人替换上述人员; (2)承担替换人员从中国到____(甲方国名)的旅费。

(3)甲方同意承担因病或工伤返回中国人员的旅费。

2.在合同期间内，技术服务组人员因工伤致残或死亡，甲方同意： (1)处理事故、工伤或死亡的一切善后事宜; (2)负担所产生的费用; (3)按____(甲方国名)现行的工人补偿法向死者伤残者支付抚恤金和/或补偿费。

第十二条 本合同未尽事宜，由双方通过友好协商解决。

双方对本合同的解释如有不同意见，发生分歧和争执，或由本合同产生或与本合同有关的其它事项，应根据____(甲方国名)的现行法律，提交双方均能接受的唯一仲裁人解决。

第十三条 本合同的执行从____年____月____日开始，有效期限共____年，此为第一阶段。

____年合同期满后，双方应进一步商定延续合同期限和与之有关的条件。

第十四条 本合同共两份，分别用中、____文写成，双方各执一份。

两种文本具有同等效力，并对双方均有约束力。

甲乙双方于上述日期签字盖章为证。

甲方签字人：____ 甲方公司名称：____ 见证人姓名：____ 地址：____ 职务：____ 签名：____

乙方签字人：____ 乙方公司名称：____ 见证人姓名：____ 地址：____ 职务：____ 签名：____

信息技术教研组工作计划

我校东校区今年正式启动，XX年是我校发展的一个里程碑，在学校发展的关键阶段，信息技术工作要走在各项工作的前面，运用信息技术手段带动各项工作稳定、协调、有序的发展。在教育部提出的“以教育信息化带动教育现代化，实现教育的跨越式发展”思想的指导下，根据学校制定的三年发展目标，信息技术组制定本学期具体工作任务及目标如下：

一、按照教学大纲要求开好信息技术课，要让每位学生顺利通过信息技术课会考；要注重培养学生计算机操作能力，让每位学生都会利用网络资源进行学习，利用计算机网络开展研究性学习。

二、做好多媒体设备的日常维护与管理工作。随着我校办学规模的不断扩大和教育教学的需要，电教设备的数量还会增加，电教设备的日常维护的工作量非常大。我们将通过培训、讲座等形式，逐步提高全校教师的操作能力，降低设备的故障率。对于出现故障的设备，要及时维修，尽量不耽误教学使用。

三、因信息技术工作发展的需要，我校近几年购进里大量的电教设备，我们将加强设备的管理工作，严把进货质量关，购货严格按照学校制度规定进行。保管室要做好进货记录，做好借用记录，做到帐物相符。

四、做好校资源库建设工作。硬件要想发挥作用，就必须有软件支持。为了提高设备利用率，丰富校资源库，最大限度的提高资源共享，我们将通过自制、下载和购置相结合的多种渠道，为各科教师提供教学资源。待到时机成熟时，我们将对兄弟学校开放我校的资源库，并收取一定的费用。

五、做好试题库建设工作。结合新课程改革，逐步建立一套完善的、符合我校需要的试题库，运用自动组卷功能，为我校的考试工作提供完善的服务。

六、逐步完善校长办公系统、教务管理系统、图书管理系统等办公自动化软件。逐步为各科、处、室、年级组、教研组配齐硬件设施，将我校的办公自动化工作落到实处，运用现代技术和手段，提高工作效率和管理水平。

七、加强校园网建设。巩固和加强校园网的安全性，不断丰富校园网站的内容，增强校园网站主页的实用性和艺术性，扩大我校网站在社会上的知名度。

八、确保一年一度的教育教学展示周、笔谈会等工作顺利进行，为我校教师的评估工作提供一个公平、公正的环境。

九、协助教导处、现代教育技术研究会开展工作。继续办好信息技术培训工作，指定切实可行的考核方案，让每一位认真学习的老师都学有所用，以提高教育教学质量。

十、计算机竞赛是我校的薄弱项目，这学期信息技术组将制定可行的计算机竞赛辅导方案，由孔洁老师负责具体工作，排除一切困难，把此项工作扎扎实实的开展下去，以期在XX年的竞赛中，确保拿到省级奖项，冲击国家级奖项。

十一、配合学校制定相关奖励政策，调动全校教师撰写电教论文、制作课件的积极性，鼓励全校老师踊跃参加一年一次的电教论文、优秀课件评比活动，多拿奖项，并力争在全国评比中获奖。

十二、按计划开展课题研究工作。做好省级课题《运用现代教育技术，优化课堂教学过程》的结题工作。

甲方(使用部门)名称：________________

乙方(受聘人员)姓名：________________ 性别：________ 民族：________

出生年月：________________ 身份证号：________________

住址：________________ 联系电话：________________

根据《中华人民共和国劳动法》以及有关法律、法规和政策的规定，经双方平等协商，订立本劳动合同。

一、合同期限

从________年________月________日起 至________年________月________日止。

甲方所负责施工的________桩基础________工程施工完成时止。

二、工作内容。

1、乙方同意按甲方工作需要安排建筑施工有关的工作。在劳动合同期内，甲方可根据工作需要和乙方工作能力，变动乙方的工作内容、岗位。

2、乙方同意遵守甲方依法制定的管理制度，按照甲方的要求，按时完成规定的工作数量并达到规定的质量标准。

三、劳动保护和工作条件。

1、甲方应严格执行国家有关安全生产、劳动保护及特殊保护等规定，对乙方提供必要的安全生产条件、劳动保护用品。对乙方进行安全卫生、业务技术及有关规章制度、劳动纪律的教育和培训。

2、乙方必须严格遵守安全操作规程，有权拒绝甲方人员的违章指挥及强令冒险作业。

四、工作报酬。

因乙方工资计算繁琐，现经甲乙双方协商约定，实行下列工资分配形式：

1、 甲方按乙方的工作工时核算乙方工资，工资以货币形式支付。

2、乙方每月的薪酬结构为正常工作时间工资 津贴 补贴。按双方商定的工资标准定时发放，不再享受其它福利待遇及费用。

五、工作纪律。

甲乙双方应严格遵守法律、法规、规章和政策。甲方制定的各项具体的内部管理制度必须合法。乙方应服从甲方的管理。

1、乙方应自觉遵守甲方依法制定的各项规章制度，按时完成生产、工作任务，如有违法违纪行为，按有关法规、规章处理。

2、乙方必须服从甲方及甲方委托人(代班人员)和工地管理人员指挥。必须服从工作安排，不得无故缺席，如有事必须向代班人员请假，如不听从代班人员的合理调动，甲方有权对乙方做适当的经济处罚或开除处理。

3、乙方必须遵纪守法，严禁打架、赌博、嫖娼、偷盗等违法行为，一经发现做开除处理并罚款，且送交执法部门追究其相应责任。工资余额年终结清。

六、劳动合同变更、终止、解除的条件。

(一)劳动合同确需变更的，双方应协商一致，并按原签订程序变更合同。

(二)劳动合同期满或者甲乙双方约定的合同终止条件出现，劳动合同即行终止。经双方同意，可续签劳动合同。

(三)乙方有下列情况之一的，甲方可以解除劳动合同：

1、在使用期内被证明不符合使用条件的;

2、旷工或者无正当理由逾期不归，经批评教育无效的;

3、严重失职、渎职或违法乱纪，对甲方利益造成重大损害的。

4、劳动合同订立时所依据的客观情况发生变化，致使原合同无法履行，经甲乙双方协商不能就变更劳动合同达成协议的。

5、乙方在聘期内劳动教养以及被判刑的，劳动合同自行解除。

(四)有下列情况之一的，乙方可以随时提出解劳动用合同：

1、在使用期内，甲方未支付工资的;

2、甲方未按照劳动合同约定支付工作报酬或者提供工作条件的;

3、国家法律、法规另有规定的。

七、本合同条款与法律、法规、规章、政策和甲方依法制定的规章制度相抵触的，以及本合同未尽事宜，均按法律、法规、规章、政策和甲方依法制定的规章制度执行。

八、本合同依法订立后，双方必须严格履行。

九、本合同履行中发生争议，经甲乙双方自行协商或上级主管部门调解未能达成协议的，可以向有管辖权的劳动争议仲裁委员会申请仲裁。甲乙双方也可以直接向劳动争议仲裁委员会申请仲裁。

十、本合同一式二份，甲乙双方各执一份。

甲方(盖章)：________________ 乙方(签名或盖章)：________________

________年________月________日 ________年________月________日

为了培养更多高级专门技术_____，应_________（甲方）的要求，_________（乙方）从年全国统一招收的博士生中录取_________（丙方）为_________专业研究方向委托培养博士研究生。

一、丙方由乙方负责培养和管理，学制三年。

二、丙方培养费每人每学年_________元整。甲方须在每学年开学前将当年的培养费汇入或交付乙方，否则其丙方不能办理注册手续。丙方若延长学业甲方须续交培养费每学期（不足一学期按一学期计算，以此类推）人民币_________元整；若丙方培养费未付清，则毕业论文不予答辩，并按乙方有关规定处理。如因故退学所交费用不予退回。

三、丙方在读期间，其人事档案、户口、工资等仍保留在甲方，医疗费用、副食品补贴、困难补助及其它待遇均由甲方负责，党团组织关系需转至乙方。

四、乙方依照国家及_________研究生教育的有关规定对丙方进行培养与管理，丙方在读期间如违反校纪校规或由于其它原因不宜继续培养，乙方将终止其学业并退回甲方。

五、丙方毕业前如申请博士后工作或出国留学，须由甲方出具同意公函。

六、丙方毕业后仍回甲方工作。其学籍档案由乙方转至甲方（含毕业证书、学位证书）。

七、本协议未尽事宜，由协议各方另行议定。自生效日起，任何一方不得违反或无故中止协议。否则，由此而造成对另方的经济损失应予赔偿。

八、本协议经甲、乙、丙三方签字并加盖公章后生效。本协议一式三份，甲、乙、丙双方各执一份。

甲方（盖章）：________ 乙方（盖章）：________

代表（签字）：________ 代表（签字）：________

________年____月____日 ________年____月____日

丙方（签字）：________

________年____月____日

甲方：?_________工作组

乙方：_________（工作组成员单位）

乙方遵照《_________章程》自愿加入_________工作组（以下简称“工作组”），并依工作组要求完成_________的有关工作（以下简称“相关工作”）。

一、甲乙双方作为相关工作的承担或参与单位，其工作任务依据相关工作的有关任务书确定，本协议仅涉及承担或参与该相关工作过程中及以后的保密责任。

二、本协议涉及保密的技术信息和技术资料包括：

1.相关工作任务书中涉及的技术信息和技术资料，以及有关会议文件，纪要和决定；

2.相关工作承担者之间往来的传真，信函，电子邮件等；

3.相关工作实施过程中产生的新的技术信息和技术资料；

4.相关工作实施过程中各有关当事人拥有的知识产权，已经公开的知识产权信息除外；

5.经甲乙双方在该相关工作实施过程中确认的需要保密的其他信息。

三、甲方责任：

1.甲方应根据相关工作任务书的规定，向乙方提供必要的技术信息和技术资料；

2.甲方在以书面形式（包括：邮件、传真、磁盘、光盘等）向乙方提供技术信息时，可以进行登记或备案；

3.甲方对乙方提供的注明保密的技术信息和资料负有保密责任，未经乙方同意不得提供给与本相关工作无关的任何第三方；

4.对不再需要保密或者已经公开的技术信息和技术资料，甲方应及时通知乙方。

四、乙方责任：

1.乙方应仅将工作组批漏的保密信息用于工作组范围内的_________制订工作。

2.乙方对从甲方或者甲方以外的其他渠道获得的涉及相关工作的技术信息和技术资料负有保密责任，未经甲方同意不得提供给任何第三方，包括乙方的分支机构，子公司或委托顾问方，接受咨询方；

3.乙方为承担本协议约定的保密责任，应妥善保管有关的文件和资料，未经工作组事先的书面许可，不对其复制，仿造等；

4.乙方应对有关人员进行有效管理，以确保本协议的履行。如乙方在职或曾在职人员在保密期内；

5.在本协议约定的保密期限内，乙方如发现有关保密信息被泄露，应及时通知甲方，并采取积极的措施避免损失的扩大。

五、本协议中涉及的有关保密信息，其中已经拥有知识产权的归原所有人所有；相关工作实施中产生的知识产权，其知识产权的归属依相关工作任务书的约定。

六、甲方为实施相关工作的需要，除乙方特别声明不能提供给他人的以外，可以将乙方提供的有关信息向本相关工作的有关方面（包括：承担相关工作的其他成员、聘请的专家、政府主管部门）提供，此行为不视为甲方违约。

乙方在实施相关工作过程中，需要向本相关工作的有关方面（包括：承担相关工作的其他成员、聘请的专家、政府主管部门）提供保密信息时，必须取得甲方的书面许可，或者由甲方负责提供。

七、违反本协议的约定，由违约方承担相应责任，并赔偿由此产生的一切损失。

八、本协议要求双方承担保密义务的期限为，自本协议签字之日或者自双方中的一方取得有关文件，资料之日起，以时间在前的为准，至本相关工作全部完成之日止。如在本相关工作实施过程中，乙方提前退出本项目，双方应在终止本相关工作后的_________年内继续履行有关保密责任。

九、双方在履行协议中产生的纠纷，应通过友好协商解决。如协商不成，双方约定的纠纷裁决地点为工作组所在地，机构为_________人民法院。

十、本协议一式三份，甲方持有两份，乙方持有一份。

甲方（盖章）：_________乙方（盖章）：_________

代表人（签字）：_________成员（签字）：_________

_________年____月____日_________年____月____日

签订地点：_________签订地点：_________

中外劳动技术服务合同范本

甲方： ×国××公司 法定地址： ×××(电话，电报挂号，电传)

乙方： 中国××公司 法定地址： ×××(电话，电报挂号，电传)

第一条 根据甲方的愿望，乙方同意派遣中国工程师，技术工人，行政人员(翻译，厨师)在××国工作。具体人数，工种，工龄和月工资详见本合同附件(略)。该附件为本合同不可分割的组成部分。

第二条 乙方人员出入中国国境和过境手续，由乙方负责办理，并负担其费用。乙方人员出入××国国境的签证和在××国境内所需办理的居留，劳动许可证等手续由甲方负责办理并负担其费用。

第三条

1.乙方人员在×国工作期间，由甲方按本合同的规定向乙方人员支付每月的工资。

2.凡工作不满一个月的乙方人员，按下列公式计算：

不满一个月的工资=月工资/30天×工作天数(包括周日和官方假日)

3.上述工资应以乙方人员到达×国之日起到离开×国之日止计算。

4.乙方于每月末将乙方人员该月的工资，包括加班费，列具清单提交甲方，甲方于清单开出之日起三天内按清单所列金额的75%以美元支付，并按当天牌价电汇给北京中国银行总行营业部中国××公司××帐户，并按×国×银行的规定负担其手续费。同时书面通知中国驻×国大使馆经济参赞处。

5.甲方将乙人员月工资和加班费的25%以××国××货币支付并汇给中国驻×国大使馆经济参赞处在××银行××帐户。

第四条 甲方负责乙方人员从××到××的旅费，并负责将此费用汇到上述乙方帐户。乙方人员从××返回××，由甲方通过××航空公司向乙方人员提供机票。甲方负责乙方人员只限往或返单程的行李超重费，其重量为20公斤。

第五条

1.甲方负责乙方人员的住宿费。在工作时间和加班时间提供从居住地到工地的交通工具。负责国营医院的医疗费。

2.乙方人员的工资和加班费不交所得税。

3.甲方为乙方人员在××国家保险公司投保生命保险。其保险费每人为(货币及数量)

4.甲方向乙方人员提供工作服和工作需要的工具。

5.甲方提供的住房，包括水，电，空调和必要的家具，床和床上用品。

6.乙方人员的居住面积如下：

(1)组长，工程师，技术员，行政人员为8--10平方米;

(2)其余人员为4--5平方米。

7.甲方向乙方提供厨房所用的饮具和旨在自己用饭所需的餐具。

第六条

1.乙方工作人员每周工作六天，每天工作八小时。

2.根据工作需要，甲方需要乙方人员加班时，加班工资按下列比例计算：

平时加班为日工资的150%。

周假日加班为日工资的200%。

第七条

1.乙方人员享受周日假和××国官方规定的节假日为十七天。

2.乙方人员每年享受带薪休假三十天。如乙方不愿享受上述假期或享受部分天数，甲方应向乙方提供报酬，其工资按下列方法计算：月工资/30天×假期工作天数。

共3页，当前第1页123

甲方：

乙方：

身份证号码：

甲、乙双方根据平等、自愿、协商一致的原则，就甲方聘用乙方担任_____技术顾问一事达成如下协议，并订立本协议，双方共同信守。

一、聘用岗位及职责

甲方聘用乙方担任本公司的_____技术顾问一职，负责公司的网站设计、后台技术开发和研制、技术革新和改进、技术的保密和管理、技术指导、技术培训和咨询服务等。

二、聘用期

聘胜期满为一年，自______年___月___日开始起算至______年___月___日止。合同期满，双方根据协商续签。

三、聘用报酬及支付方式

（一）乙方的报酬为每月的月薪______元（人民币）。

（二）由甲方在次月的___日支付在其提供的______借记卡中。

（三）工作期间产生的食宿费用、通讯费用、交通费用等乙方自理。如因特殊需要，按照甲方要求到达指定工作地点所产生的交通费用等由甲方承担。

（四）鉴于乙方是_____工作的原因，甲方不为乙方办理社会_____。

四、工作职责

（一）乙方主要负责公司的网站设计、后台技术开发和研制等。

（二）乙方有不断提出技术革新和改进的义务。

（三）乙方有提供技术咨询和培训的义务。乙方应按照甲方要求到甲方指定点参加会议、配合甲方的工作，在相应工作职责范围内根据自己的专业技术、原则、经验等开展工作。

（四）乙方不得擅自以甲方的名义对外开展工作。

（五）乙方的工作时间为弹性工作时间，但需保持通讯畅通。

（六）甲方提前____天召集乙方开会，乙方无特殊原因，须按时出席。

五、技术成果及归属

（一）乙方主要为甲方提供和研制等技术咨询。

（二）乙方在甲方_____期间，因履行职务或者主要是利用甲方的物质技术条件、业务信息等产生的发明创造、作品、计算机软件、技术秘密或其他商业秘密信息，有关的知识产权均属于甲方所有。甲方可以在业务范围内充分自由的利用这些发明创造、作品、计算机软件、技术秘密或其他商业秘密信息，用于申请权利保护、生产经营或者向第三方转让。

（三）乙方应当按甲方的要求，提供一切必要的信息和采取一切必要的行动，包括申请、注册、登记等，协助甲方取得和行使有关的知识产权。乙方在离职后无权在继续使用该技术或转让该技术。

六、保密责任

（一）乙方_____职期间的保密义务，乙方除了履行职务的需要之外，承诺承担下列保密义务：

1、乙方在_____期间，必须遵守甲方规定的所有的保密规章、制度，履行与其工作岗位相应的保密职责；

2、未经甲方同意不得刺探与本职工作或本身业务无关的商业秘密；

3、未经甲方同意不得以泄露、告知、公布、发布、出版、传授、转让或者其他任何方式使任何第三方（包括按照保密制度规定不得知悉该项秘密的甲方其他成员）知悉属于甲方或者属于他人但甲方承诺有保密义务的技术秘密或其他商业秘密信息；

4、乙方承诺，在甲方_____期间，非经甲方事先同意，不在与甲方生产、经营同类产品或提供同类服务的其他企业、事业单位、社会团体等担任任何职务,包括股东、合伙人、董事、监事、经理、职员、代理人、顾问等，并不自营与甲方类似的产品或服务，不为他人类似经营提供任何建议。

（二）乙方离职之后的保密义务

双方同意，乙方离职之后仍对其在甲方_____期间接触、知悉的属于甲方的技术秘密和其他商业秘密信息，承担如同_____期间一样的保密义务和不擅自使用有关秘密信息的义务，而无论乙方因何种原因离职。

七、违约责任

甲乙双方任何一方违反本协议之约定造成对方损失的，应该按照损失的大小承担违约赔偿责任。

八、争议的解决

本协议经双方签盖公章后生效。因履行本合发生的争议，由争议双方协商解决，协商不成的，提交______市_____委员会，依该_____委员会的_____规则_____。

九、合同的变更、解除和终止

（一）聘用合同依法签订后，甲、乙双方必须全面履行合同规定的义务，任何一方不得擅自变更或解除协议。经甲乙双方协商一致，本补充协议可以解除。

（二）有下列情况之一的,甲方可以解除聘用关系：

1、乙方不积极配合甲方工作的；

2、乙方以甲方名义私自对外开展业务给甲方造成严重损失的；

3、因乙方工作失误给甲方造成重大损失的；

4、乙方不履行补充约定的义务及岗位职责的；

十、其他

（一）本合同经甲、乙双方签字盖章后正式生效。

（二）本合同一式___份，甲、乙双方各执___份均具有同等法律效力。

甲方（盖章）：

法定代表人（签字）：

签署时间：_______年____月____日

乙方（签字）：

签署时间：_______年____月____日

甲乙双方于年月日签订了《服务合同》。

第一条合同期限

本合同有效期限为年，从合同签定之日起开始计算。

本合同有效期限届满，如果甲方需要乙方继续提供有关许可软件的技

第二条服务费

根据本合同的约定，乙方向甲方提供许可软件的技术支持服务，甲方

总计(人民币金额大写)：

使用技术支持服务费合计人民币元，支付方式为：

合同签定之日一次性付清全部货款。

使用范围。

甲方使用许可软件的范围限于：

服务费不包括乙方服务人员为向甲方提供技术支持服务所支出的差

旅费和食宿费，乙方在提供技术支持服务过程中实际发生的差旅费和

食宿费由甲方报销，但是乙方在上述款项支出前应获得甲方的书面确认。

第三条服务范围

乙方向甲方提供技术支持服务的范围包括：

1.由于系统数据库或许可软件发生严重故障或在关键处理时期内主应用程序出现故障而使甲方的现场系统停滞并且不能用许可软件处理数据。

2.可软件发生问题而导致甲方主要业务受到严重干扰并且无法轻易解决(暂时性地)的问题。

3.许可软件发生非关键性问题，并且甲方能继续运行系统和/或进行操作。

4.同不包括许可软件的升级服务，升级服务按北京用友软件股份有限公司的统一规定执行。

5.除本合同或其附件另有约定，乙方对如下软件产品不提供任何维护与技术支持服务：

5.1乙方及乙方代理人之外的任何人未经乙方许可对许可软件进行任何方式的修改而产生的软件;

5.2甲方未按照许可合同约定的范围及限制使用的许可软件。

5.3甲方所使用的任何第三方软件产品。

6.乙方提供的标准技术服务不包括以下情况：(如果双方在本合同附件中或另行约定由乙方就下述情况向甲方提供附加技术服务，乙方将根据该等约定向甲方提供服务。)

6.1甲方人员非法操作、计算机设备感染病毒或第三方产品的故障、计算机设备故障、网络故障等使许可软件无法正常运行;

6.2甲方因许可软件遗失、被盗、被误用或被擅自修改、计算机设备故障、网络故障、其他软件的故障、操作失误等情况造成数据混乱和丢失;

6.3对甲方使用许可软件的软硬件环境进行检查;

6.4对甲方使用许可软件的软硬件提供相应技术指导。

7.甲方如果要求乙方超出本合同约定的范围提供技术支持服务，甲方应与乙方另行协商签署相关协议，并向乙方支付相应的服务费用。

如果乙方在技术支持服务过程中发现提供服务的内容不属于本合同约定的范围，包括但不限于故障是由未经乙方许可对许可软件进行修改、甲方人员非法操作、计算机设备感染病毒或第三方产品的故障、计算机设备故障、网络故障造成的，乙方有权根据其自身的判断中止维护与技术支持服务，甲方应对乙方已提供的服务按照乙方当时有效的收费标准向乙方支付服务费。

第四条违约责任

甲方违约责任：

1.甲方逾期付款，乙方有权自逾期之日起每日向甲方加收拖延付款额的万分之五作为逾期付款违约金。

2.甲方逾期付款超过三十(30)日，乙方有权解除本合同。

甲方应支付乙方已提供的服务的费用，并按照一年服务费金额的30%向乙方支付违约金。

3.本合同自双方授权代表签字并加盖公章生效;本合同一式两份，双方各执一份，具有同等法律效力。

甲方(公章)：_________乙方(公章)：_________

法定代表人(签字)：_________法定代表人(签字)：_________

_________年____月____日_________年____月____日

转让方：_________________________

受让方：_________________________

鉴于：“_________”关键技术(以下称“_________”或技术成果)系经过转让方长时间的开发和实际项目的应用，技术上已完全成熟并得到特种行业用户的肯定，且具有广大的市场前景：鉴于受让方在市场开拓方面的完整商务能力，为更好地将成果应用于社会和行业用户，转让方愿意将该项技术成果转让给受让方，且受让方同意接受该技术成果。现本协议双方经过详细磋商，依据我国现行、有效的有关法律、法规之规定，就技术成果转让事宜达成协议如下：

1.第三代_________移动通信基站射频子系统及_________移动通信系统基站线性化放大器关键技术(以下称“_________”或技术成果)是指：包括但不限于有关第三代_________移动通信基站射频子系统及_________移动通信系统基站线性化放大器关键技术的软件(组件)、技术档案和技术资料。“_________”后继开发技术成果是指：包括但不限于现有_________技术的后续开发及相关的技术档案和技术资料。“_________”关联技术成果及其后继开发技术成果是指：与现有_________技术有关的其他技术成果及技术档案和技术资料，及在此基础上的后继开发及相关的技术档案和技术资料。

2.转让方于本协议生效日将本协议所涉技术成果转让与受让方。于该转让日起，受让方拥有技术成果的所有权，但法律规定禁止转让的权益除外。

技术成果的转让包括但不限于在技术成果的相关权利保护期内下列各项权利：

(1)使用权，即以复制、展示、发行、修改、翻译、注释等方式使用技术成果的权利;

(2)使用许可权和获得报酬权，即许可他人以前项中规定的部分或者全部方式使用其技术成果的权利和由此获得报酬的权利;

(3)修改权，即修改或者授权他人修改技术成果的权利;

(4)其它法律、法规规定所享有的权利。

3.转让方应于本协议生效日将所转让的技术成果全部内容的详尽资料交付于受让方

(1)该技术资料包括但不限于：___________________________________。

(2)转让方提交的上述技术资料，应使本行业内具有普通技术水平的专业人员能够理解，并能够在此基础上对软件进行修改、维护和再开发。

(3)转让方向受让方提交上述技术资料后，不得继续保留载有该软件任何实质部分的任何载体。

(4)该等资料应确保受让方能够便利地使用、享有、行使本协议第1条所述的技术成果及相关权利。

4.转让方声明并保证在本协议技术成果转让前

(1)所转让的技术成果真实、完整、合法、有效、属于其所有，不存在任何权属争议。

(2)转让方有权转让本协议所涉之技术成果，且技术成果未存有抵押、质押或其它担保等情形;

(3)转让方在本协议签订前并未将技术成果以任何方式许可或泄露给任何第三方使用或获得利益。

(4)除在本协议签订前已购得该技术成果的合法权利人外(如有)(以转让方提供给受让方的权利人名单为限)，转让方并未将技术成果以任何方式许可或泄露给任何第三方使用或获得利益。

(5)转让方保证所提供的资料是完整、正确、清晰的并保证及时交付。

5.转让方声明并保证在本协议技术成果转让后

(1)非经受让方书面同意，转让方不以任何方式使用技术成果、授权他人使用技术成果、为他人非法使用技术成果提供任何条件。

(2)转让方应保证技术成果/著作的开发者和转让方及其具有雇佣关系的人员(以下合称雇员)和转让方的关联企业不使用、不许可他人使用技术成果、不为他人非法使用技术成果提供任何条件。如前述雇员或其关联企业有前列任何行为，转让方应就上述该等行为对受让方直接承担责任。

(3)转让方应就所转让的技术成果和技术成果使用者的有关情况以及其他与该技术成果市场有关的商业信息承担保密义务，上述保密义务同样适用于转让方雇员及/或关联企业。

6.受让方的和保证

按本协议约定的转让金额在约定的付款时间内，全额支付给转让方。

7.转让方应就_________的关联技术给予受让方优先选择权，在同等条件下，受让方有优先购买权。

8.受让方应于本协议生效后三日内向转让方支付转让费人民币_________元整。

9.协议一方违约，应向另一方支付相当于全额转让费_________倍的违约金，如违约金不足以赔偿守约方因此所遭受的损失，违约方并应赔偿不足部分。

转让方未按第3条的要求向受让方提供资料，受让方有权要求转让方改正;至改正之日止，每逾期一日转让方应向受让方支付相当于全额转让费0.2‰的延期转让违约金。

10.协议一方有下列情形之一，另一方有权单方解除本协议，除执行上述第9条之约定外，并应返还从协议对方取得的的财产

(1)转让方违反第4条任何一项;

(2)未能履行前述第3、6条之约定;

(3)发生战争、自然灾害、政府行为等不可抗力，致使不能实现协议目的。

11.转让方应按受让方要求提供技术成果的技术培训、辅导等相关服务，直至受让方能够独立、正确地使用该技术成果。

12.因技术成果转让所需缴纳的有关费用，依法由各方承担。

13.本协议生效后，受让方基于本协议所涉之技术成果的后继开发、改进等技术成果的著作权及相关权利归受让方享有。

14.双方因履行本协议而提供之文件/资料作为本协议之附件，构成本协议的必要组成部分，与本协议具同等法律效力。

15.未尽事宜经协议双方协商一致并签订书面补充协议，该补充协议与本协议具同等法律效力。

16.因履行本协议而致之争议由双方友好协商解决，协商不成，提交人民法院裁决。

17.本协议一式_________份，自双方签字盖章之日起生效，由协议双方各执_________份，具有同等法律效力。

转让方(盖章)：_____________受让方(盖章)：_____________

法定代表人(签字)：_________法定代表人(签字)：_________

_________年_______月_______日_________年_______月_______日

签订地点：___________________签订地点：__________________

2017年设备技术合同范文

项 目 名 称：________________________________

委 托 方(甲方)：____________________________

研究开发方(乙方)：____________________________

填 写 说 明

一、“合同登记编号”的填写方法：

合同登记编号为十四位，左起第一、二位为公历年代号，第三、四位为省、自治区、直辖市编码，第五、六位为地、市编码，第七、八位为合同登记点编号，第九至十四位为合同登记序号，以上编号不足位的补零。各地区编码按gb2260-84规定填写。

二、技术开发合同是指当事人之间就新技术、新工艺和新工艺的新材料及其系统的研究开发所订立的合同。技术开发合同包括委托开发合同的合作开发合同。

三、计划内项目应填写国务院部委、省、自治区、直辖市、计划单列市、地、市(县)级计划，不属于上述计划的项目此栏划(/)表示。

四、标的技术的内容、形式：

包括开发项目应达到的技术经济指标、开发目的、使用范围及效益情况、成果提方式及数量。

提交开发成果可采取下列形式：

1.产品设计、工艺规程、材料配方和其他图纸、论文、报告等技术文件;

2.磁盘、磁带、计算机软件;

3.动物或植物新品种、微生物菌种;

4.样品、样机;

5.成套技术设备。

五、研究开发计划：

包括当事人各方实施开发项目的阶段进度，各个阶段要解决的技术问题，达到的目标和完成的期限等。

六、技术情报资料的保密：

包括当事人各方情报和资料保密义务的内容、期限和泄漏技术秘密应承担的责任。

双方可以约定，不论本合同是否变更、解除、终止，本条款均有效。

七、其他：

合同如果是通过中介机构介绍签订的，应将中介合同作为本合同的附件。如果双方当事人约定定金、财产抵押及担保的，应将给付定金、财产抵押及担保手续的复印件作为本合同的附件。

八、委托代理人签订本合同书时，应出具委托证书。

九、本合同书中，凡是当事人约定认为无需填写的条款，在该条款填写的空白处划(/)表示。

(正文)

依据《中华人民共和国合同法》的规定，合同双方就__________________________________ 项目的技术开发(该项目属____________计划)，________经协商一致，签订本合同。

一、标的技术的内容、形式和要求：

二、应达到的技术指标和参数：

三、研究开发计划：

四、研究开发经费、报酬及其支付或结算方式：

(一)研究开发经费是指完成本项研究开发工作所需的成本;报酬是指本项目开发成果的使用费和研究开发人员的科研补贴。

本项目研究开发经费及报酬：________________ 元

其中：甲方提供____元，乙方提供____元。

如开发成本实报实销，双方约定如下：

(二)经费和报酬支付方式及时限(采用以下____种方式)：

①一次总付：____________元，时间：________________

②分期支付：____________元，时间：________________

____________元，时间：________________

③按利润________%提成，期限：________________

④按销售额____ %提成，期限：________________

⑤其他方式：

五、利用研究开发经费购置的设备、器材、资料的财产权属：

六、履行的期限、地点和方式：

本合同自____年____月____日至____年____月____日在____________(地点)履行。

本合同的履行方式：

七、技术情报和资料的保密：

八、技术协作和技术指导的内容：

九、风险责任的承担：

在履行本合同的过程中，确因在现有水平和条件下难以克服的技术困难，导致研究开发部分或全部失败所造成的损失，风险责任由________承担。(1、乙方;2、双方;3、双方另行商定)经约定，风险责任甲方承担____ %________________乙方承担____ %

本项目风险责任确认的方式为：

十、技术成果的归属和分享：

(一)专利申请权：

(二)非专利技术成果的使用权、转让权：

十一、验收的标准和方式：

研究开发所完成的成果，达到了本合同第二条所列技术指标，按____标准，采用________方式验收，由________方出具技术项目验收证明。

十二、违约金或者损失赔偿额的计算方法：

违反本合同约定，违约方应当按《中华人民共和国合同法》规定承担违约责任。

(一)违反本合同第____条约定，________方应当承担违约责任，承担方式和违约金额如下：

(二)违反本合同第____条约定，________方应当承担违约责任，承担方式和违约金额如下：

(三)

十三、争议的解决方法：

在本合同履行过程发生争议，双方应当协商解决，也可以请求________进行调解。

双方不愿协商、调解解决或者协商、调解不成的，双方商定，采用以下第(____)种方式解决。

1.提交____ 仲裁委员会仲裁;

2.向____ 人民法院起诉。

十四、名词和术语的解释：

十五、本合同有效期限：____年____月____日至____年____月____日

甲方：____________________ 乙方：____________________

代表人：________ 代表人：________

____年____月____日 _____年____月____日

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

甲方委托乙方承担本建设项目城市规划技术服务，根据《中华人民共和国民法典》、《中华人民共和国城市规划法》以及有关规定，经双方协商同意，签订本合同。

第一条委托服务的建设项目概况：

1.1项目名称_________

1.2项目地点_________

1.3拟建建设项目规模

用地面积：_________平方米，层数：_________，建筑面积：_________平方米，层数：_________，其中含商服面积：_________平方米，层数：_________;住宅面积：_________平方米，层数：_________，管线名称：_________，长度：_________

1.4其它：_________

第二条委托服务内容：

2.1建设项目现场踏勘

2.2建设项目选址定点

2.3提供规划设计条件和有关资料

2.4比选规划设计方案

2.5提供城市规划法律法规和规划技术标准咨询服务。

2.6其他_________

2.7任务完成日期_________

第三条甲方按时向乙方提供有关文件和资料

文件资料名称_________

内容要求_________

份数_________

提交时间_________

第四条委托服务费用及支付方式

4.1甲乙双方支付或收取的服务费用标准按省物价局黑价联[__]162号文件规定的收费标准执行。

4.2本合同签订后_________天内，甲方一次性支付规划技术服务费_________万元;或本合同签订后_________天内，甲方支付规划技术服务费总额度_________%，即_________万元，项目服务内容完成后_________天内，甲方支付乙方剩余全部费用，即_________万元。

第五条双方责任

5.1甲方责任

5.1.1甲方委托规划技术服务任务时，必须向乙方提供相关文件资料和明确要求，并对所提供的文件材料真实性和时限负责。

甲方提供的文件资料超过规定期限10天以内，乙方完成规划技术服务成果的时间按合同规定的时间相应顺延;规定期限超过10天以上的，乙方有权重新确定提交规划技术服务成果的时间。

5.1.2甲方变更委托服务项目或提供文件材料有误，导致乙方返工时，双方另行签订补充合同。甲方应按乙方因此返工所耗工作量向乙方支付费用，具体标准双方协商确定。

5.1.3合同生效后，甲方要求中止或解除合同，乙方未开展服务工作的，乙方应当返还甲方已支付费用的50%;乙方已开展工作的，甲方应当按合同规定的服务费用总额支付给乙方。

5.1.4甲方应按本合同第三款规定的费用金额和时间向乙方支付规划技术服务费。甲方逾期支付一天，应向乙方多支付相应金额千分之一的逾期滞纳金。

5.1.5甲方应向乙方工作人员提供工作、交通等方面的便利条件。

5.2乙方责任

5.2.1乙方应按省物价局黑价联字[__]162号和黑建规[__]41号及有关规定开展规划技术服务活动。

5.2.2乙方对提交的委托项目规划技术服务成果质量负责。

5.2.3合同生效后，乙方提出中止或解除合同，应返还甲方所支付的服务费用。

5.2.4因乙方延误规划技术服务成果提交时间，每延误一天，乙方核减该项目规划技术服务费总额的千分之一，核减的最高限额为甲方向乙方所支付的全部费用。

第六条合同争议的解决方式：本合同在履行过程中如发生争议，由双方当事人协商解决;协商不成的，按下列第种方式解决：

提交_________仲裁委员会仲裁;

依法向人民法院起诉。

第七条其他事项

7.1本合同未尽事宜，双方应当及时协商并共同签订补充协议，补充协议与本合同具有同等法律效力。

7.2本合同自双方签订之日起生效。本合同一式两份，双方各执一份。

7.3双方共同履行完本合同规定的责任义务后，本合同即终止。

委托方

单位名称：__________________

法定代表人：__________________

经办人：__________________

单位地址：__________________

电话：__________________

开户银行：__________________

账号：__________________

________年_____月_____日

受委托方

单位名称：__________________

营业执照编号：__________________

资质等级：__________________

资质证书编号：__________________

法定代表人：__________________

经办人：__________________

电话：__________________

开户银行：__________________

账号：__________________

_________年____月_____日

甲方(聘用单位)：____________

乙方(受聘人员)：____________

身份证号码：____________

甲方因安全工作需要，决定聘用乙方担任学校安全保卫工作。根据《中华人民共和国民法典》及相关规定，经甲乙双方平等自愿协商一致，特签订本合同。

一、工作职责

1、保安人员必须服从校方提出的安全保卫要求和门卫管理制度。

2、保安人员必须着装上岗，坚守岗位，做好交接班记录。

3、保安人员应树立高度责任感，对学校安全保卫负责。坚持预防为主的方针，加强门房管理，把事故消灭在萌芽状态之中。

4、保安人员要认真做好防火、防盗工作，必须对校内重点要害部位进行巡查，负责校内师生人身财产安全，如发生案件应立即报告110，保护好现场，维护好现场秩序。

5、保安人员实行24小时值班制度，作好值班记录。对违规违纪的学生要及时教育处理，并做好记录。

6、保安人员要本着对学校安全负责的精神，按学校规定，定时开关学校大门，上课或课间休息时间，无特殊情况，不得让学生随便进出校门。若学生请假提前离校的，必须持有教师签名，同意离校的请假单，否则一律不得放行，杜绝发生因学生逃学而在校外发生的安全事故。发现学生通过非正常途径离开学校应及时劝阻、教育，并立即报告。

7、保安人员对骑车、溜车、穿拖鞋、染发、衣冠不整、穿奇装异服、带早餐进入校园、通过通透围墙购买物品学生应及时加以制止，劝其立即纠正或通过班主任要求学生限时纠正。

8、非学校师生原则上不得进入学校。外来人员来访确需进入者，按要求填写好登记表方可进入校内。

9、保安人员在学生入校前30分钟开启校门，上课铃响后全关闭。放学时应按时开启校门，30分钟后关闭。校门开启后须离开值班室站立值勤，看护学生进出学校。

10、在上学、放学时段(特别是下午、晚自习放学)，保安人员有责任维护好校门口环境秩序，禁止闲杂人员在校门口周围逗留大声喧哗。对在校门聚众吵闹影响学校教育秩序的现象，应予劝阻，对严重影响学校教育教学秩序的，先报告校长，再报乡派出所。禁止客运车辆在校门口候客及其它任何车辆无故乱停乱放，保证校大门口的畅通无阻。校门口交通堵塞时，应及时疏导。发现学校门口学生之间打架斗殴现象，须及时阻止并上报有关领导。

11、保安人员应禁止任何外来车辆进入校内。确实因工作或其它需要，经学校领导同意，验证许可做好车牌登记后，方可进校。

12、保安人员应认真协助学校做好查夜工作，并认真完成学校交办的临时任务。

二、工资报酬：乙方按照甲方规定完成工作任务的，甲方每月支付乙方工资__________元整，如政策原因需调整工资，按政策调整。

三、解聘合同：出现以下情形之一，甲方有权解聘合同。

1、辱骂殴打师生造成恶劣影响。

2、工作失职造成守护目标损失。

3、工作散漫、不负责且屡教不改。

4、当班期间无故擅自离岗。

5、邀约他人在保安室酗酒、打牌。

6、工作中不服从学校领导的安排。

7、如因政策或不可抗拒原因需解除合同，甲方不承担任何补偿费用。

四、合同有效期：________年______月______日------______年______月_______日。

五、本合同未尽事宜由双方协商解决。

本合同一式三份。甲乙双方各执一份，教办一份。自签订之日起生效。

甲方(签字盖章)：____________

乙方(签字盖章)：____________

法人代表(签字)：____________

________年________月________日

甲方(出让方)：___________________________________________

法定代表人：___________________联系电话：_________________

乙方(受让方)：______________联系电话：__________________

鉴于甲方有意将________市__________厂及其所属财产按本协议规定的条款和条件转让给乙方，乙方愿意按同样的条件受让该厂。故此依据《中华人民共和国民法典》、《中华人民共和国公司法》等法律法规、政策本着平等互利、友好协商的原则，双方签订本协议。

一、______市___________厂的基本情况：

转让厂名称为____________________;注册资本_________元，现有生产设备一套及厂房内所有财物，厂房租金____个月，部分原料和成品，生产必备手续一套。

二、公司转让价款及支付方式：

1、转让价款总计人民币大写(_______________) 。转让价款一次性付清。

2、甲方收到乙方首次付款后向乙方交付_______市_____________厂营业执照、代码证、租房合同、税务登记证、身份证复印件。

三、产权交割

甲方收到乙方100%转让价款后把_______市_____________厂相关权利归乙方所有，甲方不再享有权利承担义务。甲乙双方约定在一个月内办理相关产权变更手续。

四、经办手续费用

经甲、乙双方约定，转让所涉及的相关费用由乙方承担。

五、争议处理

在本合同履行过程中，甲、乙双方发生争议经协商无效时，可以依法向具有管辖权人民法院起诉。

六、违约责任

1、如因乙方原因导致本合同无法履行或乙方不完全履行合同约定，则无权要求返还定金，如因甲方原因导致本合同无法履行或甲方不履行合同的约定，应当向乙方支付相当于乙方交付定金的十倍补偿。

2、乙方未能按期支付本合同公司的价款或者甲方未能 按期交割本合同厂的手续，每逾期一日应按逾期部分金额的__________向对方支付违约金。

七、债务及债务

从双方签字生效之日起，甲方的债权债务和乙方无关。

本合同需变更或解除，甲、乙双方必须签定变更或解除协议。

八、权证变更

总价款付清后，由甲方配合将______市_____________厂相关证件变更到乙方名下。

九、合同的生效

本合同由甲、乙双方当事人签字盖章后生效。

十、其他

1、本合同共三页，一式四份，甲、乙双方及见证人各执一份。

2、甲方签字应由________、_________、________、_________分别署名。

甲方(公章)：________________ 乙方(公章)：_______________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

技术合同：中外技术转让合同

前言

本合同于_________年_________月_________日在_________签订。

甲方：中国_________公司

乙方：_________国_________公司

第一章 合同内容

1.1 乙方同意向甲方提供制造_________合同产品的书面及非书面专有技术。用该项技术所生产的合同产品的品种、规格、技术性能等详见本合同附件一(略)。

1.2 乙方负责向甲方提供制造，使用和销售合同产品的专有技术和其它所有有关技术资料。技术资料的内容及有关事项详见本合同附件二(略)。

1.3 乙方负责安排甲方技术人员在乙方工厂进行培训，乙方应采取有效措施使甲方人员掌握制造合同产品的技术，具体内容见本合同附件三(略)。

1.4 乙方派称职的技术人员赴甲方合同工厂进行技术服务。具体要求详见本合同附件四(略)。

1.5 乙方同意在甲方需要时，以最优惠的价格向甲方提供合同产品的备件。届时双方另签协议。

1.6 乙方有责任对本合同项目甲方需要的关键设备提供有关咨询。

1.7 乙方应向甲方提供合同产品的样机，铸件和备件，具体内容详见本合同附件五(略)。

1.8 甲方销售合同产品和使用乙方商标的规定，见本合同第八章。

第二章 定义

2.1 合同产品指本合同附件一中所列的全部产品。

2.2 蓝图指乙方制造合同产品目前所使用的总图，制造图样，材料规范及零件目录等的复制件。

2.3 技术资料是指为生产合同产品所必须具有的乙方目前正用于生产合同产品的全部专有技术和其它有关设计图纸，技术文件等。

2.4 标准指为制造合同产品向甲方提供的技术资料中，由乙方采用和制定的标准。

2.5 入门费指由于乙方根据本合同第一章1.2条，1.3条，1.4条，1.6条，1.7条规定的内容以技术资料转让的形式向甲方提供合同产品的设计和制造技术，甲方向乙方支付的费用。

2.6 提成费指在本合同有效期内，由于乙方所给予甲方连续的技术咨询和援助，以及甲方在合同有效期内连续使用乙方的商标和专有技术，甲方向乙方支付的费用。

2.7 合同有效期指本合同开始生效的时间到本合同14.3条规定的本合同终止时间的期间。

第三章 价格

3.1 按本合同第一章规定的内容，甲方向乙方支付的合同费用规定如下：

3.1.1 入门费为_________美元(大写)这是指合同产品有关的资料转让费和技术培训费，包括技术资料在交付前的一切费用。入门费为固定价格。

3.1.2 合同产品考核验收合格后，甲方每销售一台合同产品的提成费为基价的_________%。甲方向乙方购买的零件不计入提成费。

3.1.3 计算提成费的基价应是甲方生产合同产品当年十二月三十一日有效的，乙方在_________国_________市公布和使用的每台目录价格的_________%。

3.2 乙方同意返销甲方生产的合同产品。返销产品的金额为甲方支付乙方全部提成费的_________%。返销的产品应达到乙方提供的技术性能标准。每次返销的产品品种，规格，数量，交货期由双方通过友好协商确定。

返销产品价格按3.1.3条规定的提成基价计算，即目录价格的_________%。

第四章 支付和支付条件

4.1 本合同项下的一切费用，甲方和乙方均以美元支付。

甲方支付给乙方的款项应通过_________中国银行和_________国_________银行办理。

如果乙方和甲方偿还金额，则此款项应通过_________银行和_________中国银行办理。

所有发生在中国银行的费用，由甲方负担。发生在中国以外的银行费用由乙方负担。

4.2 本合同第三章规定的合同费用，甲方按下列办法和时间向乙方支付：

注：如果验收试验延迟并是甲方的责任，将不迟于合同生效后(时间)支付。

4.2.1 甲方收到下列单据，并审查无误后_________天内向乙方支付入门费_________美元(大写)。

(a)由乙方出具保证函。在乙方不能按照合同规定交付技术资料，保证偿还_________美元。

(b)即期汇票正，副本各一份。

(c)应支付金额为入门费总价的形式发票正本一份，副本三份。

(d)乙方出具的第一阶段产品的技术资料，样机，铸件和备件交付完毕的证明信正，副本各一份。

4.2.2 甲方收到乙方交付第二阶段产品的下列单据，并审查无误后_________天内向乙方支付_________美元(大写)。

(a)即期汇票正，副本各一份。

(b)商业发票正本一份，副本三份。

(c)空运提单正本一份，副本三份。

(d)乙方出具的第二阶段产品的技术资料，样机，附件五规定的_________已交付完毕的证明信副件各一份。

4.2.3 合同产品第一批样机验收合格后，甲方收到乙方下列单据，并审查无误后_________天内，向乙方支付_________美元(大写)。

共4页，当前第1页1234