一篇英文自我介绍100个词左右（优秀20篇）

Blink of an eye 10 years have gone, we ushered in a new year. Summing up the work of the past year, from a personal point of view about the measurement of awareness.

Quality is the life, quality is the fundamental guarantee for enterprise development. In the fierce competition in the construction market today, how to improve the construction quality management level is every enterprise managers must think about. Factors affecting the quality of construction in all aspects. From the engineering measurement point of view, analyze the work of measuring the pay-off to ensure and improve the quality of the construction of an important role, and simply how to strengthen the management of measurement work to improve the quality of construction.

It is a very important technical work of municipal road engineering that the measuring and measuring line is an important technical work. It is inseparable from the whole process of construction, from the preparation before construction to the completion of the construction, to the final acceptance after construction. How to do a quick and good measurement of the line, is a basic technical skills and test the basic requirements.

Do the measurement before the commencement of the end

Before the start of the project, the survey and design units shall be responsible for on-site surveying and settlement according to the design documents, and the site standard point, conductor piles and crossing point piles shall be clearly identified according to the design drawings. Within the measurement of signs, must take appropriate protection measures. On the measurement of the end, it is necessary to emphasize the protection of pile position, that is, in the design unit after pile, should be timely use of brick piers or pouring cement pier and other methods to be protected, so as not to lose. These piles are generally farmland or residential areas, it is easy to be man-made destruction, and once destroyed, let the survey and design units to fill test, then delay the construction, but also increase the cost.

Midline retest and edge loft

Center line measurement is based on the alignment measurement, the road center line plane position on the ground marked in detail. It is the difference with the alignment measurement is: alignment measurement, but the intersection of the road and the straight line segment of the necessary turning point marked out, and in the midline measurement, according to the intersection and the turning point with a series of stakes will road straight Segment and curve segments are specified in detail on the ground.

The alignment survey is usually carried out by the survey and design units, and then the pile and measurement results to the construction side, the construction unit by the middle line and construction measurement.

Subgrade construction should be fully restored before the center line, according to the restoration of the pile in the road and the relevant provisions of the roadbed side of the pile. On the midline re-measurement and edge lofting, should pay attention to the following points;

One should pay attention to the distance between the intersection, the direction is consistent with the drawings; such as an engineering project has several tenders, should pay attention to the center of the adjacent tenders are closed, midline measurements should be in-depth adjacent tenders 50 ~ 100 M; attention should be paid to the center of the structure such as bridge and culvert is closed; should pay attention to the relative position of the building and other buildings and drawings are consistent. If you find problems in a timely manner to identify the reasons for the design unit.

Second, retaining pile set. It is very important to set up pile protection pile in the middle of the road, but these piles are easy to be destroyed during the construction. Therefore, it is necessary to carry out the restoration and surveying work of the middle pile during the construction of the roadbed. In order to quickly and accurately restore the center pile in the original position, must be on the road before the construction of the main control point of the pile such as the intersection point, turning point, curve control points set up retaining pile. The so-called retaining pile, is outside the scope of the construction is not easy to be destroyed where some stakes set up.According to these pile, with simple methods (such as the intersection point, range, etc.), you can quickly restore the original pile point.

Set the pile should pay attention to the following aspects: in each straight section of the road, at least three control piles to set up retaining pile, so even if there is a control pile can not be restored, the other two points can be used to restore the straight section To the original position; the intersection angle of the two direction lines as close as possible to 90 °, should not be less than 30 ° angle of intersection; retaining pile should be selected outside the scope of construction, but not too far away; Pile distance can not be too far; The retaining pile must be solid and reliable, pile to facilitate the erection of measuring instruments and observation.

Set up retaining pile of curve side. For the curve segment, because of the more difficult to determine the side of the pile, re-measuring time-consuming more, so after a precise line, the edge of the curve section of the pile pile should also be set representative pile, which can reduce Repeat the measurement, reducing the measurement workload.

Third, the laying of mileage pile. After the midline pile is fixed, it is possible to lay out the control pile of the mileage pile on this basis. Mileage pile layout principle is: in the straight section, generally arranged in every 100 meters of the entire pile of cross-section, similar to the common road construction 100 meters pile layout; in the curve section of the pile to be properly encrypted, in the curve Mileage pile can be large stakes, above the mileage mark with paint or ink station, into the road outside the scope of construction on both sides of the ground, it is best to play on each side of a . To ensure that the construction is not easy to damage the case, from the embankment edge should be as close as possible to facilitate the use, generally 1 to 2 meters.

The laying of mileage piles is not addressed in most of the surveying and setting-out sections of the Construction Manual, and is not taken into account at many sites. I found in some sites, some construction technicians in the construction survey, the determination of the distance station is a long distance from a foot a foot row over, not only a waste of time and prone to cumulative error. If the mileage stakes are not allowed, then the elevation, slope quality control is out of the question.

Third, the proofreading and additional standard point

First, the use of design units set up before the standard point should be carefully checked, close the gap may not exceed the limit, such as exceeding the allowable deviation should identify the reasons and promptly reported to the relevant departments. The design unit delivers the leveling points normally set several months ago. These points in the field can easily be man-made collision or natural subsidence due to the ground changes, so be sure to carefully review before use; Second, the standard point of additional principles: the distance is generally 150 to 200 meters, Plus transfer station for the principle. The additional standard point should be closed with the design unit to pay the standard point, such as an engineering project at several tenders, but also with the adjacent standard segment of the standard point of closure, the closure may not exceed the limit.

The position of the leveling point shall be located on a solid, non-sinking, non-touching ground or a solid building of a permanent building. Can also be installed in the protection of deep-buried wood piles or concrete piles, and make clear signs. The leveling point should be checked once a month, and the level of the spot where the movement is suspected should be checked after re-inspection.

Vertical and horizontal cross-section measurement

Through the midline re-test, side piles line and the laying of the standard point, you can measure the vertical and horizontal cross-section. The main purpose of vertical and horizontal cross-section measurement is to calculate the amount of earth, so the vertical and horizontal cross-section measurement after the end of the measurement results should be checked with the design drawings. Where the results with the original within the allowable deviation, the original results shall prevail, and only when there are significant differences with the original results, can be reported to the supervisory engineer after verification changes. It should be noted that: the work must be carried out before construction. If the measured amount of earth and the design does not conform to the supervision of the approval should also be carried out before construction.Some site excavation to the supervisor before the actual amount of earthwork and design does not match, require additional visa, but the final supervision refused.So be sure to pay attention to the timeliness of the work.

Good morning,It is really my honor to have this opportunity for this interview; I hope I can make a good performance today. my name is Lixin, you can also call me Sweety.I am 25 years old and Im from Jiangxi Province. After graduating from Jiangxi Management of Economy Cadre Institute, the trade economical specialty since 20xx, I started to work. So now I have already had more than 6years working experience.

The knowledge I have learned in college and the 6years working lead me to a person with strong responsiblity and high working efficiency. besides, i am ambicious and flexible. I am not only able to finish the task alone but also to cooperate with other people very well which requires good ablity of communication.

Even though, my job in the past six years didnt require English skills that much, I am always very interested in it. Whats more, I never stop learning English in my spare time. In my opinion, people improve in the process of work, they also learn from the job.I am a quick learner. So I am totally confident that I can do this job very well. I will try my best to take the responsibilty and do everything as good as I can. Please trust my loyalty and effort, you wont be let down.

Thank you very much for interviewing me.

Since the car mechanic qualification in 20xx, has always been in line with the line, love line, fine line of work attitude, with full enthusiasm, and strive to forge ahead. In the work abide by the "product quality is the life of the enterprise," the creed, deeply shoulder the heavy responsibility to deal with strict self-discipline, meticulous and strict quality control, in strict accordance with the operating procedures and quality requirements for production, the work is summarized as follows: Work tasks in the work, the ideological, on the one hand, pay attention to political theory study, and strive to improve political literacy, on the other hand to strengthen the business knowledge of learning, improve operational capacity. In the leadership of the guidance and the support of colleagues with the help of a planned conduct of the theoretical knowledge and the study of turning technology. Seriously do a good job within the division.In doing this work at the same time I also submitted to the party to join the party application in daily life, work, I have been asked to ask a party member himself, and strive to learn what they have learned through, borrow "car mechanic practical manual "And other books, give up a lot of rest and entertainment time, study hard, and constantly improve their level of business theory. I always adhere to the business knowledge to be applied to the production of flexible, to apply their knowledge, combined with their many years in the practice of turning the practical experience to master the rules of the problem, to explore a set of practical production and easy to learn Found the problem of skills, improve the accuracy of the operator and work efficiency has played a significant role in helping, 1.5 sequence round table milling machine processing part of the fillet at the traces of the steps, affecting the quality of parts. The reason is because the fixture locking force is not enough, through repeated tests, repeated debugging Zhang angle, and ultimately eliminate the step problem. 2.35 sequence drilling machine tooling due to bad processing, with the technical staff actively ideas, think of a way to solve the tooling of the processing problems.

Our company development and production of hook-tail box, on the heart plate, support blocks and other new railway products, transferred from June

QC department after the initiative to help guide the leadership of new product debugging and production, will know and in the work should focus on issues and front-line staff one by one detailed, auxiliary production work carried out smoothly. In the independent sent to the machine shop, the timely and timely follow up the progress of each new product processing and the establishment of accounting, so that each new product from the machine into the workshop to start the process, each step real-time monitoring. Timely detection and feedback of new products in the process of the existing problems and to assist the technology sector to improve the processing technology. And ensure the successful completion of mechanical processing of sample samples for crcc certification of "Forged steel upper plate for railway wagons", "13b forged coupler end frame" and "17 forged hooktail frame".

◆ personal strengths and weaknesses

I learned mechanical manufacturing, and previously engaged in Haier is mainly automated robotic aspects of testing, came after the company has only been working in the machine shop, the knowledge of the relatively lack of forging. When I first came to the QC department of the forging workshop, I almost did not know the companys forging products. After consulting with my colleagues, I quickly learned about the performance and key points of each product. . I am from the machine plus apprentices began to come step by step, mechanical processing, programming knowledge more solid. In the machine after the workshop, not only to ensure that machine products and timely detection, and can be found in the process of the hidden dangers, to avoid the occurrence of quality accidents, auxiliary site production. ◆ personal development goals in the company

Quality inspection work is not a simple size detection. At present our departments involved: forging detection, machining finished product testing, tensile, impact test, metallographic test, hardness, magnetic detection, ultrasonic testing. Debugging products related to bridge bearings, construction machinery, coal mining machinery, truck parts, etc., processes heating, forging, roll forging, heat treatment, machining, etc., these things are the wealth of the hands of the company in the detection sector is not To so many things. In future work, I will, as always, people: people with good, the work: to perfect, the quality: strict hold. And constantly strive to learn and expand their knowledge, assiduously enhance their business level to look forward to the development of the company to do their part.

◆ recommendations for the company

Attention to detail, emotional trivia in life to increase points, in principle, equality and discrimination on the issue of everyone, improve employee sense of belonging and well-being, to retain talent to create a win-win situation. I listed below a few examples of Qingdao Haier Mold Co., Ltd.: employee birthday, wedding anniversary, the birthday of the children and other commemorative date, timely delivery of small gifts or leave, pull the distance between the company and employees to improve staff members of the familySatisfaction and Support.

尊敬的领导：

您好!请恕打扰.我是一名刚刚从湖北经济学院毕业的本科生.我很荣幸有机会向您呈上我的个人资料.在投身社会之际,为了找到符合自己专业和兴趣的工作,实现自己的人生价值,谨向各位领导作一自我推荐。

现将自己的情况简要介绍如下:

我是一名学习酒店管理专业的大学生，我热爱我的专业并为其投入了巨大的热情和精力. 在四年的学习生活中,我所学习的内容包括了从理论知识到专业技能知识的学习。.通过对这些知识的学习,我对这一领域的相关知识有了一定程度的理解和掌握, ,具有了一定的实际操作能力和技术.

在学校的学习，不论是基础理论知识，还是实际操作技能，我都取的了优异的成绩。在学校学习之余，我还积极参加社会实践活动。曾在20xx年参加了学校的“三下乡”社会实践活动。被评为“优秀积极份子”在20xx年5月至10月曾赴法国学习西方餐饮文化和法国高星际酒店的实习，使我能够掌握更为标准和系统的西餐服务。能够流利的运用法语和客人交流。

我真诚的希望能够到贵酒店实现我的梦想，能够为贵酒店奉献我的一份力量。同时也希望能够和贵酒店的精英团结合作。相信能够使酒店以后的事业蒸蒸日上。如果我有幸加入归酒店，我一定会努力的做好我的工作。

able to work under high pressure and time limitation.能够在高压力下和时间限制下进行工作。

be elegant and with nice personality.举止优雅、个人性格好。

with good managerial skills and organizational capabilities.有良好的治理艺术和组织能力。

the main qualities required are preparedness to work hard, ability to

learn, ambition and good health.主要必备素质是吃苦耐劳精神好、学习能力优、事业心强和身体棒。

mature，self-motivated and strong interpersonal skills.思想成熟、上进心强，并具极丰富的人际关系技巧。

energetic，fashion-minded person.精力旺盛、思想新潮。

with a pleasant mature attitude.开朗成熟。 strong determination to succeed.有获得成功的坚定决心。 strong leadership skills.有极强的领导艺术。 ability to work well with others.能够同他人一道很好地工作。 highly-motivated and reliable person with excellent health and pleasant

personality.上进心强又可靠者，并且身体健康、性格开朗。 the ability to initiate and operate independently.有创业能力，并能独立地从业。

strong leadership skill while possessing a great team spirit.有很高的领导艺术和很

强的集体精神。

be highly organized and effecient.工作很有条理，办事效率高。

willing to learn and progress.肯学习进取。

good presentation skills.有良好的表达能力。

positive active mind essential.有积极、灵活的头脑。

ability to deal with personnel at all levels effectively.善于同各种人员打交道。

have positive work attitude and be willing and able to work diligently without supervision.有积极的工作态度，愿意和能够在没有监督的情况下勤奋地工作。

young，bright，energetic with strong career-ambition.年轻、聪明、精力充沛，并有很强的事业心。

having good and extensive social connections.具有良好而广泛的社会关系。

being active, creative and innonative is a plus.思想活跃、有首创和革新精神尤佳。

with good analytical capability.有较强的分析能力。

Each interviewer, you good, my name is, the law is like a secret weapon, a law in the world is much more secure. In the university four years, I learned China jurisprudence, legal history, constitutional law, administrative law and administrative procedure law, civil law, commercial law, intellectual property law, economic law, criminal law, civil law, criminal law, international law, private international law, international economic law, grasp the basic theory and basic knowledge of law, to understand and grasp the main laws and regulations of the state, the spirit of the law and the legal value behind the understanding and grasp of the rule of law, and the use of legal theory, method and thinking to analyze problems, to solve the problem.

Book knowledge is limited, I actively participated in many social practice and community work, engaged in a large organization to plan the party, call to secretarial work, accumulated a lot of experience from failure to success. I think it is more important to learn the actual operation ability and the organization cooperation ability.

In the usual practice, I learned a lot, especially some books to school work experience, although there have been previous success and failures, from which I get is a lot of work principle and work experience for me now, things have become mature. In the past work, I have a serious and responsible work, team spirit, and good communication skills.

As a graduate, maybe my knowledge is limited, perhaps I was too young, the lack of practical experience, I may not like other people in some areas to work freely, but the young means of passion and vitality. I dont have much experience, it doesnt mean I cant do it. Because there is no experience, but more able to let me focus on one thing, and not easy to be outside interference, to maintain their own ideas, to maintain their own sense of accomplishment. This will be more dynamic, will be a big harvest. I am confident that I can overcome all kinds of difficulties in my study and life after graduation from my ability and study, and realize the value of life and the goal of my life.

goodafternoon, teachers! today, im very happy to make a speech(演讲) here. now, let me introduce (介绍)myself. my name is . my english name is molly. im 12. i come from class1 grade 6 of tongpu no.2 primary school. im an active girl. i like playing basketball. because i think its very interesting. id like to eat potatoes. theyre tasty(好吃的). my favourite colour is green. and i like math best. its fun.

on the weekend(在周末), i like reading books in my room. i have a happy family. my father is tall and strong(强壮).my mother is hard-working(工作努力) and tall, too. my brother is smart.(漂亮) and im a good student. my dream(梦想) is to be a teacher, because i want to help the poor (贫穷的)children in the future(在将来). thank you for listening! please remember(记住) me!

Hello everyone!

I am from class . lively and cheerful, calm, resolute, to the overall situation. I am honored to stand here to express their long-standing wish: "I want to join the Discipline Department." I solemnly pledge: "I will do my best to complete the school leaders and students to my the task, so that students will become a modern active groups, the right-hand man of the school and students rely on the organization"

During this time, I learned how to deal with people, how to learn patience, how to solve the conflicts, how to coordinate the relationship between members, how to deal with the relationship between other departments, how to mobilize all the forces that can be united, how to promote and use good, how to deal with the contradiction between learning and work. All this shows that I have the ability to qualify students to join the Discipline Department and the ability to students will carry forward.

Please give me a vote of confidence, give me a chance to display their talents!

大家好，我叫__，丹东本地人，是一名大四学生，现在德鼎担任外贸实习生一职。我性格开朗，乐观爱笑，做事认真，乐于与他人交流。平时喜欢看书，爬山和运动。(欢迎大家推荐好书，我们一起交流)最喜欢的一句话是：能用汗水解决的事情，绝不用泪水。大学的专业是英语(国际贸易方向),我来到这里已经一个月了，虽然只有一个月的时间，但在这短短一个月里，我能充分的感受到公司领导对于工作的严谨细致，对员工的无微不至，同事们对于工作的认真负责，同事间关系的和谐融洽，所以感到非常高兴也非常荣幸能加入这个大家庭中来，这里不仅为我提供了一个成长锻炼，展示自我的良好舞台，也让我有机会认识更多的新同事，新朋友。作为一名进入一个全新工作环境的新员工来说，尽管在过去的学生会工作中积累了一定的工作经验，但刚进入公司，难免还是会有些压力。为了能让自己尽早进入工作状态和适应工作环境，有问题及时请教同事，积极学习工作所需要的各项专业知识，努力提高自己的水平。这段时间我学到了很多知识，过得非常充实和快乐。

在这里，我要特别感谢在这段时间帮助过我的领导和同事，谢谢领导们能给我一次这么好的实习机会，谢谢同事们无微不至的关怀和不厌其烦的帮助，才使得刚刚从象牙塔中走出来的我尽早从一种紧张情绪中解放出来，使我尽快地适应了环境，全情的投入了工作。我深知，还有许多方方面面的知识需要向大家学习，还望在以后的工作中大家能够多多指教。

当然我也明白，唯有积极行动才能带来丰硕的成果。为了做好这份工作，我正用心的完成领导交给我的每一项任务。希望自己能在今后的工作中充分发挥自己的专业特长，高效率完成公司领导安排的每一项工作，为公司的明天贡献自己的一份力量。

所以在日后的工作中，我依然会主动去了解并适应环境，同时也要将自己优越的方面展现给公司，在充分信任和合作的基础上与大家建立良好的关系。除此之外，我还要时刻保持高昂的学习激情，不断地补充知识，提高技能，以适应公司发展。在工作中我可能会有迷茫和压力，但是我会注重细节的积累，今天的一点变化，明天的一点努力，后天的一点学习，这样不断的日积月累，珍惜时间，严格要求自己，就一定能够取得进步。

最后跟大家分享一个小故事：据说古罗马人有两座圣殿：一座是勤奋的圣殿，另一座是荣誉的圣殿。他们在安排座位时有一个顺序，就是人们必须经过前者，才能到达后者。他们的寓意是，勤奋是通往荣誉的必经之路。那些试图绕过勤奋寻找荣誉的人，势必会挡在荣誉的大门之外。所以，为了实现自己大大的梦想，请勤奋工作，从现在开始。

我的新员工入职自我介绍就到这里，真诚的谢谢大家，并祝愿大家在新的一年心想事成，万事胜意!祝愿我们的公司蓬勃发展，再铸辉煌!

热爱设计，有很深的设计底蕴和手绘功底以及丰富谈判技巧，对时尚有着敏锐的嗅觉!做事追求完美，责任心强，有较强的沟通及协调能力。沟通能力强，有亲和力，形象气质佳。

自信、诚实、认真、严谨，喜欢学习，热爱创作。美术功底扎实，擅长Flash、3Dmax、AI、Photoshop，具有多年的动画制作经验，能较快的适应新事物，具有良好的审美能力，有独特的创作风格。曾负责过多个网页、动画、游戏项目，熟悉二维动画和三维动画的制作流程，设计能力与管理能力兼备。

Everybody is good! Im Ren Zijia, I this year ten years old, then I will introduce myself.

I had a big, round head, like a big ball, big round head and a pair of watery big eyes, just like a black grapes. I now more and more fat, mom booked a plan for me, morning and noon can eat more, cant eat in the afternoon. Although Im a little fat, but start to as fast as an arrow.

I like to eat candy. When mom buy a candy bar, even if the fairy to also dont want to stop me. I also like playing computer games. But now my friends are myopic, dad set a password on the computer. Its very disappointing. In addition, I also like small animals. But no space to keep small animals at home. I had to catch a little covers an area of bird to raise. Every day I fed it act as hosts to many insect pests.

This is me, do you want to make friends with me?

大家好!我叫任子甲，我今年10岁了，接下来我就自我介绍一下。

我长着一个又大又圆的头，就好像一个大皮球，圆圆的大头上长着一双水汪汪的大眼睛，就如同一个黑葡萄。我现在越来越胖，妈妈给我订了一个计划，早晨和中午可以多吃饭，下午不可以多吃。虽然我有点胖，但是走起路来像飞箭一样快。

我喜欢吃糖块。每当妈妈买来糖块时，就算神仙来了也别想拦住我。我还喜欢玩电脑游戏。可是现在我的朋友都近视了，爸爸在电脑上设了密码。真是太扫兴了。除此之外，我还很喜欢小动物。可是家里没有空地来养小动物。我只好捉了一只不大占地的小鸟来养。每天我捉来好多害虫来喂它。

这就是我，你们愿意和我做朋友吗?

I am a third-year students have just graduated. My hometown in Guangdong, is a family of four, my father and mother engaged in garment business, the younger brother is also a university student. I am optimistic personality, is a person who likes to communicate with others. I like sports, especially basketball and tennis. Many of my friends are very fond of sports people. Any time after school, I will some friends on my classmates to physical exercise. Movement which is very real pleasure. I like that feeling. I would also like to watch sporting events, such as basketball, soccer, tennis and golf, I have some favorite sports idols such as . Finally, I want to say is that today this is very pleased to be candidates for the sport, profession, believe in your company a number of training and learning, I believe I can do the job. And will fall in love with the job. Please give me such an opportunity.

Management theory knowledge structure is firm, can be fully and successfully applied in practice; basic knowledge of English is more solid, hoping to better their own learning and practical application link.

I have more than two years of administrative work experience, personnel attendance, logistics, office supplies procurement, staff mentality exchange and administrative affairs have some familiarity. Have a strong sense of responsibility, ability to execute, love their jobs, good communication skills and coordination. Willing to Chikunailao, the courage to forge ahead. If you can join your company, I will go all out.

Familiar with the general taxpayer account processing of foreign-funded enterprises, sensitive to numbers, familiar with the tax process, skilled use of anti-counterfeiting tax invoice system, electronic reporting system, online certification system, Kingdee K3 and Standard Edition, familiar with banking, industry and commerce, taxation and other government departments Process.

I am honest and trustworthy, work carefully, proactive, responsible, self-motivated, hard-working. Good interpersonal relationship, good interpersonal skills, strong practical ability, strong communication and coordination skills, strong professionalism and team spirit, sensitive to the digital and have a keen awareness. Proficient in computer, skilled use of gold disc financial software, after years of accounting practice, I have been able to skillfully deal with all sectors of accounting accounting, with a certain financial basis.

Im a primary scholar! My name is Liyuanyuan, Im in class3 grade3. Sometimes, I like swimming with my father, my favorite sports is basketball, because it can keep health I think Im very voluble and friendly! I want to make friends with everybody! Thanks a lot!

我是一名小学的学生!我的名字叫黎圆圆，我在3年级3班。有时候，我喜欢和我爸爸一起游泳，我最喜欢的运动是篮球,因为它能使我保持健康。我认为我很健谈并且很友好!我想和这里的每个人交朋友!多谢。

I live in chengdu with my family.

Both my parents are teachers of a college, I study in balizhuang school which was known as chengdu foreign lauguage school.

After graduate,I went to beijing for further study.Soon I became a student of foreign affair college, received bachelor degree.

When I came back, I found a job in mianyang, entering the changhong company, became an employee of the export department, which last for almost two years.

During that time, I began to think, will my life be like this forever, Im not really content with such assistant job. At that time, the company decided to move our department to zhongshan which is in guangdong. I made an agreement with the company, ended the contract.

After that, i went back to chengdu, work in a small export company now.

Engineering Department - × × × According to the recent emergence of individual employees of the implementation of the poor, low efficiency and poor coordination between departments and other issues, is to reflect on their work, the specific situation is as follows:

1, the implementation of force: in their daily work in strict accordance with the requirements of the project management standards for inspection and construction, but sometimes the requirements of the construction team lax, problems; like security, on-site health issues; work is not deep enough, The specification is not detailed enough. As the daily work has been generally mastered, the work has been focused on communication, arrangement, implementation, subjective that this is the focus, if the implementation process to do more detailed, some things will achieve better results, but also lead to some deep-seated The problem can not be fully grasped.

2, work efficiency: sometimes in the daily work and the construction unit communication is not enough, mentality sometimes more impetuous, can not calmly solve the problem; mainly due to the lack of fulfillment of duties, lack of sense of responsibility to work hard enough, not fine, the work is completed Can do further checks, the quality of work can not be guaranteed, or even do useful work, low efficiency.

3, with the department: the engineering department as the company logistics department, mainly for the workshop and department services, but I do not good enough in the service, the overall sense is not strong enough, work only from their own work, sometimes with personal work Emotions, not threw himself into the work, the service is not enough fine, too much surface to deal with the problem.

The above problems are mainly lack of their own sense of responsibility, do not work hard to deal with; sense of responsibility, the overall situation is not strong enough, ignoring the work of enthusiasm, initiative, creativity, there is a contentment to the existing level of thinking.

In the future work, I must further improve the work style, we must strive to be good at overcoming negative thinking, get rid of irritable mood; strengthen self-building, and strive to learn their own work needs professional knowledge and business skills, better work methods and work, selfPressure always maintain a positive mental state, high standards and strict requirements, to do their jobs.

2020英文简历中的自我评价

面试外企公司或机构会让你写一下自我评价，那么要怎样用英文写出不一样的自我评价呢?下面是小编搜集整理的英文简历的自我评价，欢迎阅读。更多资讯请继续关注自我评价栏目!

Mature，dynamic and honest.

思想成熟、精明能干、为人诚实。

Excellent ability of systematical management.

有极强的系统管理能力。

Ability to work independent1y，mature and resourcefu1.

能够独立工作、思想成熟、应变能力强。

A person with ability plus flexibility should app1y.

需要有能力及适应力强的人。

A stable personality and high sense of responsibility are desirable.

个性稳重、具高度责任感。

Work well with a multi-cultural and diverse work force.

能够在不同文化和工作人员的背景下出色地工作。

Bright，aggressive applicants.

反应快、有进取心的应聘者。

Ambitious attitude essential.

有雄心壮志。

Initiative，independent and good communication skill.

积极主动、独立工作能力强，并有良好的交际技能。

Willing to work under pressure with leardership quality.

愿意在压力下工作，并具领导素质。

Willing to assume responsibilities.

应聘者须勇于挑重担。

Mature，self-motivated and strong interpersonal skills.

思想成熟、上进心强，并具极丰富的人际关系技巧。

Energetic，fashion-minded person.

精力旺盛、思想新潮。

With a pleasant mature attitude.

开朗成熟。

Strong determination to succeed.

有获得成功的坚定决心。

Strong leadership skills.

有极强的领导艺术。

Ability to work well with others.

能够同他人一道很好地工作。

Highly-motivated and reliable person with excellent health and pleasant personality.

上进心强又可靠者，并且身体健康、性格开朗。

The ability to initiate and operate independently.

有创业能力，并能独立地从业。

Strong leadership skill while possessing a great team spirit.

有很高的领导艺术和很强的集体精神。

Be highly organized and effecient.

工作很有条理，办事效率高。

Willing to learn and progress.

肯学习进取。

Good presentation skills.

有良好的表达能力。

Positive active mind essential.

有积极、灵活的头脑。

Ability to deal with personnel at all levels effectively。

善于同各种人员打交道。

Have positive work attitude and be willing and able to work diligently without supervision。

有积极的工作态度，愿意和能够在没有监督的情况下勤奋地工作。

Young，bright，energetic with strong career-ambition.

年轻、聪明、精力充沛，并有很强的事业心。

Good people management and communication skills. Team player.

有良好的人员管理和交际能力。能在集体中发挥带头作用。

Able to work under high pressure and time limitation.

能够在高压力下和时间限制下进行工作。

Be elegant and with nice personality.

举止优雅、个人性格好。

With good managerial skills and organizational capabilities.

有良好的管理艺术和组织能力。

The main qualities required are preparedness to work hard, ability to learn, ambition and good health.

主要必备素质是吃苦耐劳精神好、学习能力优、事业心强和身体棒。

Having good and extensive social connections.

具有良好而广泛的社会关系。

Being active, creative and innonative is a plus.

思想活跃、有首创和革新精神尤佳。

With good analytical capability.

有较强的分析能力

延伸阅读：如何准备出色的英文简历

Balance Sheet基本方法

选择要应聘的工作后，必须看清招聘广告上所列出的每项要求，再将自己的学历、能力与兴趣逐一与之比较，作一张balance sheet.

例如，一则关于marketing management trainee和job requirement是这样写的：

We are looking for a competent person to fill the captioned position：

-University graduate major in Marketing Management. Prepared to develop career in the commercial field

-Outgoing personality

-Able to communicate at different levels

-Good knowledge of PC operations

-Proficiency in written and spoken English/Mandarin

那么你相应地考虑自己的qualification的选择和表述，就可以这样写(与上列各项对应)：

-University graduate with major in Marketing

-Having actively participated in Business clubs activities and learned accounting and management

-Good in communication with people and like a lot of out door activities, know how to tackle with people from all walks of life

-Skillful in operating Words, Excel, Lotus1-2-3, etc

-Fluent in English and Mandarin

这个方法的好处是可让求职者清楚了解该职位是否适合自己，而本身资料又是否切合要求，而且，明白了各项要求后，就可依据每一点在履历表上重点提出自己在该方面的强项。突出卖点(selling point)，将之放在最吸引人的地方，使招聘者一眼可见，有利于present自己。

Work experience工作经验的陈述

工作经验是resume中令招聘者相当感兴趣的一项内容，善加措词是不可忽视的要务。

刚毕业，何来工作经验?其实，读书时的兼职、实习、实践，以至所曾参加的一些课外活动-协助出版学校刊物、举办活动，展览、宣传……都可算是工作经验、不过，表达起来要有针对性地展开，列出那些与所找工作有关的项目重点介绍，必要时更可使用summary的方式，以给招聘者深入的了解。

下面的写法显得相当简陋呆板：

1996/7-1996/8 General Clerk, IBM

1995/7-1995/8 Account clerks, Manley Toy Trading

1994/6-1994/8Salesgirl, Esprit.

倘能换一种表述如：

Three years of job experience in different positions have offered me opportunities to understand different job aspects.

-As a General Clerk (IBM),Accounts clerk (Manley Toy Trading), I have learned how to prepare purchasing orders, place orders, handle accounting matter, check voucher,… also (Salesgirl, Esprit) developing the technique of selling, serving and stocking.

就能更好地突出个人工作经验，吸引招聘者的注意力!

Job objective 事业目标

通常，一般求职者只会在履历表开端简单地写上所应征的职位-Position Applied: Management Trainee或I am applying for... 其实，若懂得利用这小小空间写出自己的事业目标(job objective)，更能显示出你对该工作的热诚及憧憬，能令招聘者对你加倍留意。

比如这个不错的例子：

Job objective

To begin as a Marketing Management Trainee, with opportunity to advance to executive level and contribute to the development of firm.

其实，这位外企人士所谈的关于准备英文简历的技巧，也完全可以应用到中文简历上来。各位读者可以尝试一下。

Good afternoon .I am of great hornor to stand here and introduce myself toyou .

First of all ,my english name is ...and my chinese name is ..If you aregoing to have a job interview ,you must say much things which can show yourwillness to this job ,such as ,it is my long cherished dream to be ...and I ameager to get an opportunity to do...and then give some examples which can giveevidence to .then you can say something about your hobbies .

and it is best that the hobbies have something to do with the job. What ismore important is do not forget to communicate with the interviewee,keeping asmile and keeping your talks interesting and funny can contribute to thesuccess. I hope you will give them a wonderful speech .Good luck to you !

简单的英文自我介绍2

Good afternoon, teachers! My name is Yangxiaodan. Im 11 now. Im from Class2Grade 5 of TongPu No.2 Primary School. My English teacher is Miss Sun. Shesquiet and kind. Shes short and young. My good friend is ZhangBingbing. Shes 12.Shes tall and pretty. Were in the same class. We both like English very much. Ilike painting , listening to music, playing computer games and reading books. Myfavourite food is chicken. Its tasty and yummy. I often do my homework and readbooks on Saturdays. This is me. Please remember Yangxiaodan. Thank you verymuch!

我的名字叫，来及XX市，是20xx级外国语学院朝鲜预习的大一新生。

我，爱笑，爱乐，爱简单，爱热闹，爱听音乐爱交朋友，爱自由自在，爱与众同乐，爱hold不住的兴奋，也爱无厘头的搞笑，爱安安静静的自得其乐，也爱疯疯癫癫的热热闹闹，i自己，i刘晗，我就是这样，不管你欣赏不欣赏，我依然在自己的人生道路上跌跌撞撞而又不失姿态的走下去。Be myself alaways!

我的历史没有光彩夺目的修饰，只有一步一步女里证明自己的艰辛与坚定。做过团支书，知道团支书的不易与担当;做过学习委员，不是想象中的闲职，是必须为大家的学习负责;获得过“三好学生”，才懂得成功不是随随便便，轻而易举的眼高手低，而是实实在在，不懈努力的眼低手高;获得过“优秀班干”，终于尝到“在其位，谋其政”的甜头。过去了就让它过去吧，毕竟这已成为历史，想在我能做的就是——在大学生新的征途中抓住机遇，展现自己，与大家一起同享大学带来的surprises。

进入大学意味着无限的机会，一个征服新的领域的机会。我想在大学充实自己的生活，培养自己的能力，“见贤思齐焉”，不断拔高自己。舞台这么大，我会很努力，很努力，很努力，很努力地去拼搏，去奋斗。博一下，才不悔我大学的一路走来。

在大学里，我想把最给力的自己展现给大家，与大家伙儿一起day day up(天天向上)!

good morning,my name is karies.Its a great honur to have the opportunity for this interview. I would like to answer whatever you may raise,and I hope I could make a good performance today.Now I will introduce myself briefly.

Doctor Jocob Chen once said" Aim high ,vertical launch ,fly fast,complete your mission with style." Now given the chance,I will try my best to make it.

Good afternoon (morning), professors：

It is my great pleasure to be here. My name is mingmingzhou , graduated fromComputer Science Department of Wuhan niversity.During my four-year study in the university as an under-graduate student, I have built up a solid foundation of professional knowledge, as well as a rich experience of social activities. I am a determined person, always willing to achieve higher goals.

Whats more, I am good at analysis, with a strong sense of cooperation. All of these led me to the success of passing the first round of the entrance examination to the Masters degree. Personally, I am very humorous and easy-going, enjoying a goodrelationship among my classmates. In my spare time, I like to read books regarding how to be myself and how to deal with problems. Music and movies are my favorite entertainments. As for my sportinterest, I could not deny my greatest interest is football. Playing this game brings me a lot of glory, happiness and passion.

All in all, Wuhan University, with a highly qualified faculty and strong academic environment is the university I have long admired. I believe that I am a very qualified applicant for admission into your Master of IT program and can contribute to the enrichment or diversity of your university.