更多相似范文
篇1:技术信息与技术资料保密协议
甲方:_________工作组
乙方:_________(工作组成员单位)乙方遵照《_________章程》自愿加入_________工作组(以下简称“工作组”),并依工作组要求完成_________的有关工作(以下简称“相关工作”)。
经双方协商一致,为确保相应工作涉及的技术信息和技术资源不被泄露,并防止上述保密信息被滥用,甲乙双方达成如下协议:
一、甲乙双方作为相关工作的承担或参与单位,其工作任务依据相关工作的有关任务书确定,本协议仅涉及承担或参与该相关工作过程中及以后的保密责任。
二、本协议涉及保密的技术信息和技术资料包括:1.相关工作任务书中涉及的技术信息和技术资料,以及有关会议文件,纪要和决定;2.相关工作承担者之间往来的传真,信函,电子邮件等;3.相关工作实施过程中产生的新的技术信息和技术资料;4.相关工作实施过程中各有关当事人拥有的知识产权,已经公开的知识产权信息除外;5.经甲乙双方在该相关工作实施过程中确认的需要保密的其他信息。
三、甲方责任:1.甲方应根据相关工作任务书的规定,向乙方提供必要的技术信息和技术资料;2.甲方在以书面形式(包括:邮件、传真、磁盘、光盘等)向乙方提供技术信息时,可以进行登记或备案;3.甲方对乙方提供的注明保密的技术信息和资料负有保密责任,未经乙方同意不得提供给与本相关工作无关的任何第三方;4.对不再需要保密或者已经公开的技术信息和技术资料,甲方应及时通知乙方。
四、乙方责任:1.乙方应仅将工作组批漏的保密信息用于工作组范围内的_________制订工作。
2.乙方对从甲方或者甲方以外的其他渠道获得的涉及相关工作的技术信息和技术资料负有保密责任,未经甲方同意不得提供给任何第三方,包括乙方的分支机构,子公司或委托顾问方,接受咨询方;3.乙方为承担本协议约定的保密责任,应妥善保管有关的文件和资料,未经工作组事先的书面许可,不对其复制,仿造等;4.乙方应对有关人员进行有效管理,以确保本协议的履行。
如乙方在职或曾在职人员在保密期内;5.在本协议约定的保密期限内,乙方如发现有关保密信息被泄露,应及时通知甲方,并采取积极的措施避免损失的扩大。
五、本协议中涉及的有关保密信息,其中已经拥有知识产权的归原所有人所有;相关工作实施中产生的知识产权,其知识产权的归属依相关工作任务书的约定。
六、甲方为实施相关工作的需要,除乙方特别
篇2:广告宣传设计服务协议
签订日期:____________年 _____月 _____日
甲方:__________公司
乙方:__________
依据《中华人民共和国民法典》和有关法规的规定,乙方接受甲方的委托,就委托设计事项,双方经协商一致,签订本合同,信守执行:__________
甲方为乙方提供logo设计,服务内容如下:
一、 关于知识产权约定
甲方对版权的理解和定义是以《 中华人民共和国著作权法》 、 《中华人民共和国商标法》及《中华人民共和国商标法实施条例》为依据。
1、甲方对设计完成的作品享有著作权。乙方将委托设计的所有费用结算完毕后,甲方可将作品著作权转让给乙方(需另行签订转让合同)。但甲方享有署名权并保留用于参展,评选,展示的权利。乙方付清所有设计费后,甲方不得把此设计方案交给任何第三方使用。
2、乙方在未付清所有委托设计费用之前,甲方设计的作品著作权归甲方,乙方对该作品不享有任何权利。
3、乙方在余款未付清之前擅自使用或者修改使用甲方设计的作品而导致的侵权,甲方有权依据《中华人民共和国著作权法》追究其法律责任。
4、结款后最终设计稿的一切版权(包括图案与名称)归乙方所有,甲方的设计师在为乙方设计过程中所设计的非最终设计稿(例如初稿)的稿件及其设计理念的版权,归甲方所有。
二、关于初稿提供
1 、所有的初稿都是通过且只通过互联网提供。在甲方与乙方达成设计协议后,并在收到乙方的总金额的50%(即 500 _____元,大写 伍佰元 整)时,甲方就会开始为乙方设计。在整个过程中,乙方均可以通过网络形式观看到初稿及修改稿,特殊情况下,如果乙方要求,源文件甲方也可以刻盘以邮寄方式送达但是产生的费用由乙方承担,此外,甲方不提供其它形式制作的稿件(包括纸质或其它材料做成的稿件)。
2 、在收到乙方的预付款后,甲方将会在设计套餐相应的工作日内完成初稿供与选择,如果甲方不能及时提供,甲方将无条件地将乙方的预付款全额退回。
3 、根据乙方选择的设计套餐,将由甲方分配若干相应专业设计师专职完成你的设计任务,设计师分配的权利归甲方所有。
天津XX公司
4 、在收到初稿后的 _____日内(含第_____日),乙方必须向甲方提供修订请求。否则,甲方视乙方默认甲方所提供的初稿已经无需进行修改,并且认为该设计项目已经完成。这时,乙方必须将余X的款项付清。
三、关于稿件的修订
1 、所有修改稿件都是通过且只通过互联网提供。甲方会提供1-3_____个修改版本供乙方选择。双方同意,修改的目的是在初稿的基础上更进一步完善。如果要作重大改变涉及到重新设计初稿(如由于乙方自己的原因,需要更改名称和其它重大修改),甲方保留每个加修_____元的权利。
2、 当客户选定初稿后,又做重大改变(如由于乙方自己的原因,又想选择别的设计初稿进一步修改),甲方保留每返工一次加收_____元的权利。
3 、如果乙方在确认设计稿件最终完成后,没有在接下来的二十个工作日内(含第二十日)将余款结清,甲方保留通过法律程序向乙方索回余X款项及由此造成的一切损害的权利。
4 、如果乙方同意购买甲方提供的不同稿件中的两个稿件时,第二个设计图须另加收设计费全款50%。
5 、修改的周期视其修改的复杂程度及乙方要求的变化及设计计划而定,最多不超过____个工作日。
6 、乙方在收到稿件的任何过程中,如果在____日内(含第_____日)没有回应及再次作出修改的请求,这表明乙方已经确认了设计稿为最终样式,而甲方也认为这种设计项目已经最终完成。
四、关于最终稿的提供
1 、当乙方确认最终稿完成后,根据设计文件的类型,乙方将会得到设计源文件之一(AI、EPS、PSD);以及图片格式之一(JPG、GIF)。最终稿件的提供都是通过且只通过互联网提供。甲方会向乙方提供最终稿的电子稿件,不提供其它形式制作的稿件。源文件提供包括见相应的设计套餐。
2 、只有甲方在收到乙方余X的款项后,甲方才会将最终稿传给乙方。如果在____日内,乙方没有对是否收到文件做出回应,甲方有权认为乙方已经收到该文件。
3 、甲方不承担上述几种格式在乙方自己的电脑上支持或兼容中所涉及的硬件或软件的技术问题的责任,但乙方可以通过本网站所设的其它栏目或以电子邮件的方式获得帮助。
甲方不接受除了 LOGO 设计和甲方已经在本合同之外的其它要求。但对于乙方的某些特殊要求,甲方会尊重乙方的选择,并且尽量配合完成。
五、关于违约责任
协议在下述情形下可以解除:
自协议签订之日起,甲方已经展开设计工作,如乙方提出终止协议,乙方支付给甲方的设计定金,甲方不退还;如甲方提出终止合同,乙方支付给甲方的设计定金,甲方退还给乙方。
在甲方提交给乙方的设计初稿得到乙方认可后的时间里,甲方已经全面展开印刷应用的设计制作工作,乙方如提出终止协议,乙方需要支付甲方全额的设计费用。
六、关于争议解决
凡因订立,解释,履行本协议时所发生的与本协议有关的一切争议,双方应通过友好协商解决;当事人不愿协商解决或者协商不成,可由一方提交该方所在地法院处理。
本协议一式两份,甲乙双方各执一份,具有同等法律效力,本合同自签字盖章之日起生效。(合同未尽事宜,双方本着友好原则进行协商)。
甲方盖章:________________ 乙方盖章:________________
甲方签字:________________ 乙方签字:________________
日期:________________ 日期:________________
篇3:设备技术员岗位的职责描述
职责:
1、 遵守公司规章制度,尽职尽责,保质保量完成生产任务。
2、 严格按照设备SOP进行使用、保养和维修,确保设备正常运转。
3、 按要求进行规范操作,确保现场符合要求。
4、 配合工程师做好设备改进工作。
5、 做好本岗位的巡检工作。
任职资格:
1、 全日制本科以上学历,机电、设备、电子、机械等专业优先。
2、 有1年以上药企工作经验者优先。
3、 学习能力强,团结协作,服从大局。
4、 工作认真负责,肯吃苦,肯钻研。
篇4:项目技术负责人岗位职责经典
1.贯彻执行国家有关技术政策及上级技术管理制度,对项目技术工作全面负责。
2.组织施工技术人员学习并贯彻执行各项技术政策、技术规程、规范、标准和技术管理制度。贯彻执行质量管理体系标准。组织技术人员熟悉合同文件和施工图纸,参加施工调查、图纸会审和设计交底。
3.负责制定施工方案、编制施工工艺组织设计,并向有关技术人员进行交底。
4.组织项目各项规划、计划的制定,协助项目经理对工程项目的成本、安全、工期及现场文明施工等日常管理工作。
5.组织项目部的质量检查工作,督促检查生产班组开展自检、互检和交接检,开展创优质工程活动。
6.负责整理变更设计报告、索赔意向报告及索赔资料。
7.参加建设单位组织的各种施工生产、协调会,编制年、季、月施工进度计划。
8.负责项目各阶段的工程计价、计量资料的收集、整理和申报签认手续。
9.负责主持竣工技术文件资料的编制,参加竣工验收。
篇5:技术专有许可协议
专利名称_____________________________________
专利号_______________________________________
许XX名称______________ 被许XX名称_________________
地址_____________________ 地址______________________
代表人____________________ 代表人____________________
签订地点_________________ 签订地点_________________
前言 (鉴于条款)
第一条 名词和术语(定义条款)
第二条 专利许可的方式与范围
第三条 专利的技术内容
第四条 技术资料的交付
第五条 使用费及支付方式
第六条 验收的标准与方法
第七条 对技术秘密的保密事项
第八条 技术服务与培训(本条可签从合同)
第九条 后续改进的提供与分享
第十条 违约及索赔
第十一条 侵权的处理
第十二条 专利权被撤销和被宣告无效的处理
第十三条 不可抗力
第十四条 税费
第十五条 争议的解决办法
第十六条 合同的生效、变更与终止
第十七条 其他
鉴于许__________________专利,该专利为(职务发明创造或非职务发明创造),专利为__________________(九位),公开号为(八位包括最后一位字母),申请日为____年____月____日,授权日为____年____月____日,专利的法定届满日为____年____月____日。并拥有实施该专利所涉及的技术秘密及工艺;
鉴于被许(姓名或名称)属于____领域的企业、事业单位、社会团体或个人等,拥有厂房____,____设备,人员____及其他条件,并对许专利技术有所了解,希望获得许可而实施该专利技术(及所涉及的技术秘密、工艺等);
鉴于许同意向被许授予所请求的许可;
双方一致同意签订本合同
第十八条 名词和术语(定义条款)
本条所涉及的名词和术语均为签订合同时出现的需要定义的名词和术语。如:
专利——本合同中所指的专利是许许可被许实施的由中国专利局受理的发明专利(或实用新型专利或外观设计专利)专利号:
发明创造名称:___________________________________。
技术秘密(know—how——指实施本合同专利所需要的、在工业化生产中有助于本合同技术的最佳利用、没有进入公共领域的技术。
技术资料——指全部专利申请文件和与实施该专利有关的技术秘密及设计图纸、工艺图纸、工艺配方、工艺流程及制造合同产品所需的工装、设备清单等技术资料。
合同产品——指被许使用本合同提供的被许可技术制造的产品,其产品名称为:____。
技术服务——指许为被许实施合同提供的技术所进行的服务,包括传授技术与培训人员。
销售额——指被许销售合同产品的总金额。
净销售额——指销售额减去包装费、运输费、税金、广告费、商业折扣。
纯利润——指合同产品销售后,总销售额减去成本、税金后的利润额。
改进技术——指在许许可被许实施的技术基础上改进的技术。
普通实施许可——指许许可被许在合同约定的期限、地区、技术领域内实施该专利技术的同时,许保留实施该专利技术的权利,并可以继续许可被许以外的任何单位或个人实施该专利技术。
排他实施许可——指许许可被许在合同约定的期限、地区、技术领域内实施该专利技术的同时,许保留实施该专利技术的权利,但不得再许可被许以外的任何单位或个人实施该专利技术。
独占实施许可——指许许可被许在合同约定的期限、地区、技术领域内实施该专利技术,许和任何被许以外的单位或个人都不得实施该专利技术。
分许可——被许经许同意将本合同涉及的专利技术许可给第三方。等等。
第十九条 专利许可的方式与范围
该专利的许式是独占许可,(排他许可、普通许可、交叉许可、分许可);
该专利的许可范围是在某地区制造(使用、销售)其专利的产品;(或者)使用其专利方法以及使用、销售依照该专利方法直接获得的产品;(或者)进口其专利产品(或者)进口依照其专利方法直接获得的产品。
第二十条 专利的技术内容许向被许提供专利号为____,专利名称为的全部专利文件(见附件1),同时提供为实施该专利而必须的工艺流程文件(见附件2),提供设备清单(或直接提供设备)用于制造该专利产品(见附件3),并提供实施该专利所涉及的技术秘密(见附件4)及其他技术(见附件5)。
第二十一条 技术资料的交付
1、技术资料的交付时间
合同生效后,许收到被许支付的使用费(入门费)(¥、$___________万元)后的____日内,许向被许交付合同第三条所述的全部资料,即附件(1~5)中所示的全部资料。
自合同生效日起,____日内,许向被许交付合同第三条所述全部(或部分)技术资料,即附件(1~5)中所示的全部资料。
2、技术资料的交付方式和地点
许将全部技术资料以面交、挂号邮寄、或空运方式递交给被许,并将资料清单以面交、邮寄或传真方式递交给被许,将空运单以面交、邮寄方式递交给被许。
技术资料交付地点为被许所在地或双方约定的地点。
第二十二条 使用费及支付方式
1、本合同涉及的使用费为(¥、$___________元)。采用一次总付方式,合同生效之日起____日内,被许将使用费全部汇至许账号、或以现金方式支付给许。
2、本合同涉及的使用费为(¥、$___________元)。采用分期付款方式,合同生效后,____日内,被许即支付使用费的____%即(¥、$_________元)给许,待许指导被许生产出合格样机____台____日后再支付____%即(¥、$_________元)。直至全部付清。被许将使用费按上述期限汇至许账号、或以现金方式支付给许。
3、使用费总额(¥、$___________元),采用分期付款方式,合同生效日支付(¥、$___________元)自合同生效日起____个月内支付(¥、$___________元)____个月内再支付(¥、$___________元)最后于____日内支付(¥、$___________元),直至全部付清。被许将使用费按上述期限汇至许账号,或以现金方式支付给许。
4、该专利使用费由入门费和销售额提成二部分组成。
合同生效日支付入门费(¥、$________元),销售额提成为____%(一般3~5%),每____个月(或每半年、每年底)结算一次
被许将使用费按上述期限汇至许账号,或以现金方式支付给许。
5、该专利使用费由入门费和利润提成二部分组成(提成及支付方式同4)。
6、该专利使用费以专利技术入股方式计算,被许与许共同出资(¥、$___________万元)联合制造该合同产品,许以专利技术人股股份占总投资的____%(一般不超过20%),第年分红制,分配利润。
支付方式采用银行转账(托收、现金总付等)。现金总付地点一般为合同签约地。
7、在4、5、6情况下许有权查阅被许实施合同技术的有关账目。
第二十三条 验收的标准与方法
1、被许在许指导下,生产完成合同产品个(件、吨、等单位量词)须达到许所提供的各项技术性能及质量指标(具体指标参数见附件6)并符合国际___________标准、国家___________标准、行业___________标准。
2、验收合同产品。由被许委托国家(或某一级)检测部门进行,或由被许组织验收,许参加,并给予积极配合,所需费用由被许承担。
3、如因许技术缺陷,造成验收不合格的,许应负责提出措施,消除缺陷。第二次验收仍不合格,许没有能力消除缺陷的,被许有权终止合同,许返还使用费,并赔偿被许部分损失。
4、如因被许可责任使合同产品验收不合格的,许应协助被许,进行补救,经再次验收仍不合格,被许无力实施该合同技术的,许有权终止合同,且不返还使用费。
5、合同产品经验收合格后,双方应签署验收合格报告。
第二十四条 对技术秘密的保密事项
1、被许不仅在合同有效期内而且在有效期后的任何时候都不得将技术秘密(附件4)泄露给本合同当事双方(及分许)以外的任何第三方。
2、被许具体接触该技术秘密的人员均要同被许法人代表签订保密协议,保证不违反上款要求。
3、被许应将附件4妥善保存(如放在保险箱里)
4、被许不得私自复制附件4,合同执行完毕,或因故终止、变更,被许均须把附件4退给许。
第二十五条 技术服务与培训(本条可签订从合同)
1、许在合同生效后____日内负责向被许传授合同技术,并解答被许提出的有关实施合同技术的问题。
2、许在被许实施该专利申请技术时,要派出合格的技术人员到被许现场进行技术指导,并负责培训被许具体工作人员。
3、被许接受许XX培训的人员应符合许提出的合理要求。(确定被培训人员标准)3、被许可派出人员到许接受培训和技术指导。
4、技术服务与培训的质量,应以被培训人员能够掌握该技术为准。(确定具体标准)
5、技术服务与培训所发生的一切费用,如差旅费,伙食费等均由被许承担。
6、许完成技术服务与培训后,经双方验收合格共同签署验收证明文件。
第二十六条 后续改进的提供与分享
1、在合同有效期内,任何一方对合同技术所作的改进应及时通知对方;
2、有实质性的重大改进和发展,申请专利的权利由合同双方当事人约定。没有约定的,其申请专利的权利归改进方,对方有优先、优价被许可,或者使用该技术的权利;
3、属原有基础上的较小的改进,双方互相提供使用;
4、对改进的技术还未申请专利时,另一方对改进技术承担保密义务,未经许可不得向他人披露、许可或转让该改进技术。
5、属双方共同作出的重大改进,申请专利的权利归双方共有,另有约定除外。
第二十七条 违约及索赔
(一)对许:
1、许拒不提供合同所规定的技术资料,技术服务及培训,被许有权解除合同,要求许返还使用费,并支付违约、
2、许无正当理由逾期向被许交付技术资料,提供技术服务与培训的,每逾期一周,应向被许支付违约金________,逾期超过________(具体时间),被许有权终止合同,并要求返还使用费。
3、在排他实施许可中,许向被许以外的第三方许可该专利技术,被许有权终止合同,并要求支付违约金________。
4、在独占实施许可中,许自己实施或许可被许以外的第三方实施该专利技术,被许有权要求许停止这种实施与许可行为,也有权终止本合同,并要求许支付违约金___________。
(二)对被许:
1、被许拒付使用费的,许有权解除合同,要求返回全部技术资料,并要求赔偿其实际损失,并支付违约金__________。
2、被许延期支付使用费的,每逾期___________(具体时间)要支付给许违约金___________;逾期超过___________(具体时间),许有权终止合同,并要求支付违约金___________。
3、被许违反合同规定,扩大对被许可技术的许可范围,许有权要求被许停止侵害行为,并赔偿损失,支付违约金____;并有权终止合同。
4、被许违反合同的保密义务,致使许技术秘密泄露,许有权要求被许立即停止违约行为,并支付违约金____。
第二十八条 侵权的处理
1、对合同有效期内,如有第三方指控被许实施的技术侵权,许应负一切法律责任;
2、合同双方任何一方发现第三方侵犯许专利权时,应及时通知对方,由许与侵权方进行交涉,或负责向专利管理机关提出请求或向人民法院提起诉讼,被许协助。
第二十九条 专利权被撤销和被宣告无效的处理
1、在合同有效期内,许专利权被撤销或被宣告无效时,如无明显违反公平原则,且许无恶意给被许造成损失,则许不必向被许返还专利使用费。
2、在合同有效期内,许专利权被撤销或被宣告无效时,因许有意给被许造成损失,或明显违反公平原则,许应返还全部专利使用费,合同终止。
第三十条 不可抗力
1、发生不以双方意志为转移的不可抗力事件(如火灾,水灾,地震,战争等)妨碍履行本合同义务时,双方当事人应做到:
(1)采取适当措施减轻损失;
(2)及时通知对方当事人;
(3)在(某种事件)期间,出具合同不能履行的证明;
3、发生不可抗力事件在(合理时间)内,合同延期履行;
4、发生不可抗力事件在___________情况下,合同只能履行某一部分(具体条款);
5、发生不可抗力事件,持续时间超过___________(具体时间),本合同即告终止。
第三十一条 税费
1、对许和被许均为中国公民或法人的,本合同所涉及的使用费应纳的税,按中华人民共和国税法,由许纳税;
2、对许是境外居民或单位的,按中华人民共和国税法及《中华人民共和国外商投资企业和外国企业所得税法》,由许纳税;
3、对许是中国公民或法人,而被许是境外单位或个人的,则按对方国家或地区税法纳税。
第三十二条 争议的解决方法
1、双方在履行合同中发生争议的,应按合同条款,友好协商,自行解决;
2、双方不能协商解决争议的,提请___________专利管理机关调处,对调处决定不服的,向人民法院起诉;
3、双方发生争议,不能和解的,向人民法院起诉;
4、双方发生争议,不能和解的提请___________仲裁委员会仲裁;
注:2、3、4只能选其一。
第三十三条 合同的生效、变更与终止
1、本合同自双方签字、盖章之日起生效,合同的有效期为____年(不得超过专利的有效期)
2、(对独占实施许可合同)被许无正当理由不实施该专利技术的,在合同生效日后__________________(时间),本合同自行变更为普通实施许可合同。
3、由于被许原因,致使本合同不能正常履行的,本合同即告终止,或双方另行约定变更本合同的有关条款。
第三十四条 其他
前十六条没有包含,但需要特殊约定的内容,如:其他特殊约定,包括出现不可预见的技术问题如何解决,出现不可预见的法律问题如何解决等。
许签章__________________ 被许签章__________________
许法人代表签章__________ 被许法人代表签章__________
____________年_____月_____日 ____________年_____月_______日
篇6:技术总监岗位职责_合同范本
1 负责起草公司技术发展规划,上报总经理办公会审批并依照审批决议实施;
2 领导公司技术人员完成公司签约的工程项目和咨询项目及申报项目的技术部份;
3 负责规划并形成公司行业解决方案;
4 参与公司重大业务问题的决策;
5 协助编写投标方案和咨询服务,并协助专业销售部门完成销售工作;
6 负责项目启动、项目计划、项目客户验收及项目内部总结验收评审等相关工作;
7 负责协调解决项目中项目组与部门间的问题;
8 负责参与重要项目的售前支持;
9 负责与潜在客户/合作伙伴的方案讨论与技术交流;
10 负责制定部门管理规范报批并执行以及业务流程规范化管理;
11 负责对下属人员招聘做出决策,并参与重要岗位员工招聘工作;
12 负责对下属部门经理(番禺经理)及相关有工作关系的人员进行考核;
13 参与公司文化建设工作;
14 定期向总经理(番禺总经理)汇报工作,定期听取下属员工的工作汇报;
15 参与公司总经理会议或其他重大会议;
16 完成总经理交办的其他工作。
(1) 制订并组织实施技术系统工作目标和工作计划。
(2) 组织制订并实施技术系统规章制度和实施细则。
(3) 技术、产品开发与创新。
(4) 组织建立并实施质量体系。
(5) 公司标准化、计量管理工作。
(6) 组织不合格品的审理工作。
(7) 定期进行技术分析和质量分析工作,制定预防和纠正措施。
(8) 重要技术工艺设备、计量器具的申购。
(9) 技术系统文件等资料的整理保管及公司档案管理工作。
(10) 公司保密工作。
篇7:技术合同示范文本的最新内容
甲方(赠与人):_____________、住址_____________
乙方(受赠人):_____________、住址_____________
甲乙双方就赠送_____________(赠与的标的物,如赠与微机一台,应写明“浪潮386型微机一台”,如其他物品,也应写明该赠与物是什么、在什么位置)事宜达成协议如下:
1、甲方将其所有的_____________(标的物)赠送给乙方,其所有权证明为:__________________________(写明证明甲方拥有所有权的证据名称,如赠与房屋,就应有房产所有权证,赠与微机应有购买该微机的发票等)
2 、赠与物的交割
__________________________(写明交割的条件,在什么时间、什么地点交割,办理什么手续等等)
3、乙方应在期限内办理所有权转移的手续逾期不办的,视为拒绝赠与(也可以约定其他条件)。
4、本合同自_____________日起生效(可以写自公证之日起生效)。
5、本合同一式两份,双方各执一份。
甲方:_____________(签字、盖章)
乙方:_____________(签字、盖章)
_____________年 _____________月 _____________日
篇8:平面设计劳动合同
聘用方:
受聘方:
甲乙双方已相互介绍了涉及本合同主要内容的有关情况,在自愿平等和相互信任的基础上,签定本合同,以便共同遵守。就______年___月___日开始,乙方为甲方提供内衣产品网络展示平面设计、内衣产品销售活动平面图片及淘宝店铺平面设计的服务之事宜,现特订立本协议。具体条款如下:
第一条:工作流程及职责
职责:
1.有淘宝店铺平面设计工作经验熟练使用制图编辑软件,能够熟练、快速、高效的完成图片排版设计等编辑工作,熟练使用,任何两种图形设计软件,负责公司淘宝网店的美化设计、整体美化,活动广告和相关图片的制作,以及设计定期的推广活动;负责产品的形象包装,从各个方面尽可能挖掘出产品更多的卖点;
2.配合网络销售的市场宣传推广、品牌形象等宣传资料、广告资料及培训资料等相关内容的设计。
3.负责根据店铺情况及时更新产品页面图片;负责网店面装修设计等。
4.负责购物网站的企划设计、产品说明设计、网站页面设计;
5.负责网购商品宣传所用的各种平面设计,图片处理等工作;
6.负责网站整体的美术设计、创意工作和制作工作,主要负责企业站的前台美工设计和排版;
7.对页面进行优化,使用户操作更趋于人性化;
8.参与制定整个网站的栏目结构、设计风格定位,设计并负责其实施;
9.乙方同时兼职淘宝销售客服。
0.合同期间服从公司领导的安排,必须遵守甲方的一切规章制度。任职要求:
1.全面负责公司旗下淘宝店铺的排版,设计等执行工作,包括:店面整体形象设计更新、商品描述美化、促销活动平面支持等甲方及时发布任务单。
2.及时完成甲方给予的工作安排,无特殊原因不能超过协商好的任务单所安排的时间;
3.完成的各个项目所有权属于甲方。
4.甲方应配合乙方提供相关项目的设计资料、设计内容、文字资料、截图等等
5.一般的工作流程。
提出工作任务-商议工作及进度-设计及制作-审核-修改-审查合格
6.乙方有职责为设计制作后续的印刷、喷画工序进行监督。第二条协议期限
本协议有效期为壹年,自双方签订之日起至_________年_________月_________日止;合同期满时,双方若不提出异议,则本合同继续生效一年,依此类推,直到双方同意终止合作,则本合同失效。
第三条违约责任
乙方不经甲方签字确认而进行后续的产生费用的工序,甲方有权追究乙方责任。
乙方不能按商定的时间完成任务,经商议无效,甲方有权终止合同。
乙方有能力却不履行具体下达的任务单时,经商议无效,甲方有权终止合同;
甲方不按时支付工资给乙方,乙方有权终止合同并追讨应得的工资和经济损失。
第四条劳动报酬和福利待遇
1.乙方在合同期间,享有公司一切福利待遇及奖励。
2.工资结算方式:每月结算_______元月,兼职客服按销售提成_______结算;
3.四金缴纳:□无□有。
4.工资结算日期:每个月的_________日结算上月工资。
5.工资结算周期:当月的_________日到次月的_________日。
6.个月试用期,根据个人表现情况2-3个月签订劳动合同。
7.双休,严格执行国家法定节日。
8.表现优异者或有突出贡献者,年终给以发放奖金。
第五条合同生效、中止与结束
本合同需经甲乙方签字后有效,文件一式二份;
甲乙双方若需要中止合同,必须提前一个月提出,否则追究对方的责任并要求赔偿;
合同期满时,双方若不提出异议,则本合同继续按一年为单位生效,依此类推,直到双方同意终止合作,则本合同失效。
第六条合同纠纷解决方式
本合同在执行过程中发生纠纷,双方协商不成时,采取下列方式解决:
一、向有管辖权的劳动部门申请仲裁;
二、向有管辖权的工商行政管理局经济合同仲裁委员会申请仲裁;
三、向有管辖权的人民法院起诉;
四、其它解决方式:_______________。
甲方:乙方:
_________年____月____日_________年____月____日
篇9:广告策划创意和设计制作
甲方:________________
乙方:_________________
甲、乙双方本着平等合作、互惠互利的原则,经友好协商,就甲方委托乙方作为“ ___________” 的策划推广(包括广告创意、设计、制作、发布代理,以及营销、招商、推广的计划、策略、提案)事宜,达成如下一致协议:
1、 合作范围
甲方委托乙方作为“ ______________”(以下简称“项目” )的策划推广,全权负责本项目的广告创意、设计、制作、发布代理,以及营销、招商、推广的计划、策略、提案等合作事宜。
2、合作期限
委托期为 __________年 _____月 ______日至 ____________年 ________月 _____日。本协议合作期限届满前一个月,经协商同意,双方可续签合作协议。
3、广告投放总额
本协议合作期间,本项目广告投放总额不低于 ___________万元人民币。
4、工作内容
5、双方责任与权力 甲方的责任和权力:
6、收费条例
7、知识产权
本合同所完成之成品或所确认之设计稿件,在所有款项结清后,其所有权归属甲方所有。在所有权归甲方后,乙方仍有权未经甲方同意,用所设计之作品参与公益、专业、行业或各类组织机构的竞赛评比活动。但乙方不得用于除此之外的其他目的与事项。
8、违约责任
9、 中止合作的条件
任何一方违反本协议或各分项目合同各项规定的,对方有权书面通知对方予以及时纠正;如一方不能及时纠正,则另一方有权中止本协议或各分项合同的执行。
10、其他
甲乙双方可在协商一致情形下,以附件形式补充其他条款。
本协议与附件未尽事宜,双方协商解决,协商不成,任何一方可提交_________市仲裁委员会仲裁。
本协议连同附件一式二份,双方各执一份,具有同等法律效力。本协议自双方签约日期起生效。
甲方:____________
乙方:______________
签定日期: _________年____ 月 ______日
篇10:技术出口合同范本_合同范本
Contract for Equipment Sales and Technology Licensing
Contract No. ____________________
This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).
Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:
Article 1 Definitions
1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.
1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.
1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.
1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.
1.5 “Destination Airport” refers to _____________Airport.
1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.
1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.
1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.
1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.
1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.
1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.
1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.
1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.
1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.
1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.
1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.
1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.
1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.
1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.
Article 2 Scope of the Contract
2.1 The Seller’s Obligation
2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.
2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.
2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.
2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.
2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.
2.2 The Buyer’s Obligation
2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.
2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.
2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run, Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.
2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.
2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.
2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.
Article 3 Grant of License
3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.
3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.
3.4 Territory
3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.
3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.
Article 4 Price
4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.
4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).
The breakdown price is as follows:
The price for Equipment is __________(say _______________________ only).
Fee for design is __________(say _______________________ only).
Fee for Technical Documentations is __________(say _______________________ only).
License fee is __________________(Say: _________________ only)
4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).
4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.
4.2.3 The above price is fixed and firm.
4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.
4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.
Article 5 Payment
5.1 Down Payment
Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.
5.2 [Option One: Payment by Sight L/C]
The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).
5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) Bill of Lading in one (1) original and ___ ( ) copies;
(b) Commercial Invoice in one (1) original and ___ ( ) copies;
(c) Packing list in one (1) original and ___ ( ) copies;
(d) Certificate of Origin in one (1) original and ___ ( ) copies;
(e) Insurance Policy in one (1) original and ___ ( ) copies;
5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;
(b)One ( 1 ) copy of commercial invoice.
5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;
b) One (1) copy of Commercial Invoice.
5.2 [Option Two: Payment under a L/G]
The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.
5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.
Article 6 Delivery of Equipment and Technical Documentation
6.1 The Delivery of the Equipment
6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.
6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.
Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.
6.1.3 The port of shipment is ____, while the port of destination is ____.
6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.
6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.
6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:
(a) Contract number
(b) Name of the vessel and loading port
(c) Name of the Equipment shipped
(d) Number and date of Bill of Lading
(e) Total volume
(f) Total gross and net weight
(g) Total number of packages/cases
6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:
(a) Bill of Lading
(b) Commercial Invoice
(c) Packing List
(d) Certificate of Origin
(e) Insurance Policy.
6.2 The Late Delivery of the Equipment
6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:
(a) From the first week to the fourth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per
week
(b) From the fifth week to the eighth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per week
(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of
the value of the delayed portion of the Equipment per week
6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.
6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.
6.3 The Delivery of the Technical Documentation
6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.
6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.
6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.
6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.
Article 7 Packing and Marking
7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.
7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:
(a) Destination
(b) Consignee
(c) Contract number
(d) Shipping mark
(e) Gross/net weight (kg)
(f) Case/ bale number
(g) Dimensions: L x W x H (cm)
7.3 Each package shall contain one (1) copy of packing list.
7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.
7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.
(a) Destination
(b) Consignee
(c) Contract number
(d) Gross/net weight (kg)
(e) Item number
(f) Dimensions: L x W x H (cm)
Article 8 Technical Service and Technical Training
8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.
8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.
8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.
8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.
Article 9 Standards and Inspection
9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.
9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.
9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.
The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.
9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.
In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.
9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.
9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.
If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.
Article 10 Design and Design Liaison
10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.
10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.
10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.
Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance
11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.
11.2 Chief Representatives
11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.
11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.
11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.
11.3 Erection and Test Run
11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.
11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.
11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.
11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.
11.4 Commissioning and Performance Test
11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.
If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.
11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.
11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.
11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.
11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.
11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.
11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.
11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.
11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.
The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.
11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.
11.5 Acceptance
11.5.1 Acceptance shall occur in respect of the Equipment when :
(a) Performance Test has been successfully completed as per the Article 11.4.6.; or
(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or
(c) The Seller has paid the liquidated damages as per Article 11.4.9; or
(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or
(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.
11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.
11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.
11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.
11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.
Article 12 Guarantee and Warranty
12.1 The Seller guarantees that:
(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;
(b) The Technical Documentation shall be complete, clear and correct.
12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.
12.3 Defect of the Equipment
12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.
The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.
12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.
12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.
12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.
12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.
12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:
(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or
(b) Alteration, modification or repair without the Seller’s prior written consent; or
(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or
(d) Normal wear and tear.
12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.
12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.
12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.
12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.
12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.
Article 13 Intellectual Property Right
13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.
13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.
13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.
13.4 Registration of the Contract and Maintenance of Patent
13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.
13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.
13.5 Improvement and Grant-back
13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.
13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.
13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.
Article 14 Confidentiality
14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.
14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.
14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.
14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.
14.5 This Article 14 shall survive the expiration or termination of the Contract.
14.6 The confidential obligation shall not apply to the information which:
A. now or hereafter enters the public domain; or
B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or
C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.
Article 15 Taxes and Duties
15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.
15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.
15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.
15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.
Article 16 Force Majeure
16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.
16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.
16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.
Article 17 Applicable Law and Settlement of Disputes
17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.
17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.
17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.
17.4 The arbitral award shall be final and binding upon both parties.
17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.
Article 18 Effectiveness, Term and Termination of the Contract
(a) The Seller and the Buyer sign the Contract;
(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);
(c) The Seller receives the Down Payment;
(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.
18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.
18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.
18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.
(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.
(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.
(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.
18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party
A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
B. fails to perform its confidentiality obligation under the Contract; or
C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.
18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if
A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or
B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or
C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.
18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,
The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.
All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.
All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.
In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.
The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.
E. Termination of the Contract shall not release either party from its confidential obligations under the Contract
Article 19 Miscellaneous
19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).
19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.
19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.
If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract,the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.
19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.
19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.
The Buyer:
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
The Seller :
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.
The Buyer:
The Seller:
By:______________________[Signature]
Name: [printed name]
By:_______________________ [Signature]
Name: [printed name]
Title:
Title:
Appendices
Appendix 1 Specifications and Guarantee Indices (Omitted)
篇11:公司聘用研发部技术员合同书
甲方____________
身份证号码:________________
乙方____________
身份证号码:________________
丙方____________
身份证号码:________________
兹因甲方工作需要,决定采用人事代理方式聘用乙方从事相关工作。经甲、乙双方协商一致,达成如下协议:
一、聘用期限
自_____年_____月_____日至_____年_____月_____日止,共_____年_____月,其中试用期自_____年_____月_____日至_____年_____月_____日止,共_____月。
二、聘用岗位及职责
乙方应服从甲方工作安排,在聘用期内履行以下义务:
工作岗位:___________________________________
职责及要求:遵守国家的法律法规,甲方的各种规章制度,接受甲方的劳动安全教育,遵守安全规章制度和操作规程,确保安全生产。
三、乙方完成本合同规定的岗位工作职责后,甲方应向乙方支付以下待遇
1、甲方以现金形式按月支付乙方工资,采取工资制,工资标准为人民币_____元。
2、甲方支付乙方的其他待遇按照市人才交流中心规定。
3、甲方支付乙方必需的劳保用品和工作工具。
四、聘期管理
1、甲、乙双方执行_____山市人才交流中心《人事代理合同_____号》。
2、聘用期间,乙方人事档案,人事关系由_____市人才交流中心代理,所需费用由乙方支付。
3、聘用期满后,经双方协商,可以续聘,续聘合同另行签订。
4、在聘期内任何一方提出解除聘用关系,须提前一个月以书面形式通知对方,并在征得对方同意后,方可根据规定解除聘用关系。
五、出现以下情况之一,甲方可以提前解除本合同
1、乙方在试用期内不符合聘用条件的;
2、乙方违反国家法律法规和甲方规章制度,情节较为严重的;
3、甲方因工作原因必须撤消岗位,又无法重新安排工作的;
4、乙方因病或非因工负伤,医疗期满后,不能从事原岗位工作的;
5、乙方不服从甲方工作安排的;
6、按照国家及甲方有关规定可以解除聘用关系的。
六、甲,乙双方聘用关系解除或终止后,乙方自谋职业
七、甲,乙双方协商的其他条款
合同终止不再续聘或解除合同的,乙方须按甲方规定办理离校手续。
八、本合同在执行期间产生的争议,由__________市人才交流中心负责调解,调解不成的,任何一方可提请上级政府仲裁机构进行仲裁。
九、乙方若有违反本合同约定条款的,按甲方人事代理聘用人员有关规定承担相应责任。其他未明确的,按甲方有关规定执行。
十、丙方自愿为乙方提供担保,乙方若出现违反本合同约定事项,丙方承担连带责任。
十一、本合同经甲,乙,丙三方签并经__________市人才交流中心鉴证后生效,合同期限届满,合同自行终止,甲,乙双方聘用关系终止。
十二、本合同一式四份,甲方、乙方、甲方人事部门、__________市人才交流中心各执一份。
甲方__________
甲方__________
______________年_________月_________日
乙方__________________
______________年_________月_________日
丙方____________________
______________年_________月_________日
人才交流中心鉴证____________
______________年_________月_________日
篇12:技术保密协议范本_合同范本
第一章 总则
第一条 为保护本单位的技术秘密,防止无形资产流失,根据《中华人民共和国保守国家秘密法》、《中华人民共和国反不正当竞争法》和国家科委1995年1月6日发布的《科学技术保密规定》文件,结合本单位的实际情况,特制定本单位《技术保密管理规定》(以下简称《规定》)。
第二条 技术秘密是一种重要的无形资产,保护本单位的技术秘密是每位职工的义务和责任,任何人不得利用职权和工作之便或采取不法手段泄漏、发表、使用、许可、出售、转让本单位的技术秘密。
第三条 各单位特别是技术业务和科研、人事、组织等部门要把技术保密工作列入工作规划,计划及经济责任制,使技术保密工作真正落到实处。
第二章 机构和职责
第四条 单位设立技术保密工作小组,由主管技术的领导任组长,技术管理部门负责人任副组长。知识产权、档案管理中心为技术保密工作归口管理部门,负责保密管理的日常工作。各部门必须指定一名技术管理人员兼管本单位的技术保密工作。
第五条 技术保密工作小组和技术保密工作者职责
一、技术保密工作小组职责
1、制订技术保密工作规划、计划、各项规章制度及保密协议,同时负责划定本单位内项目的密级等工作,并组织实施。
2、研究解决技术保密工作中出现的重要问题。
3、对各部门技术保密工作开展情况进行督促检查和总结评比,并负责对泄密、失密事件的调查和处理,对重大特大泄密事件上报及协同调查工作。
4、组织职工学习技术保密的法律法规和上级保密规定,提高广大职工的保密意识。
二、技术保密工作者职责
1、组织本单位职工学习技术保密方面的法律法规和上级保密规定,提高广大职工的保密意识。
2、贯彻执行本单位技术保密管理方面的规章制度和国家有关法律法规。
3、对本单位技术保密工作开展情况进行总结并及时报告泄密事件。
4、建立本单位保密管理及保密协议管理档案;负责保密协议执行情况的跟踪调查。
第三章 保密范围
第六条 本《规定》所称的技术秘密,是指被列入国家秘密的技术项目和列为企业秘密的项目、由本单位组织研制开发或者以其他合法方式掌握的、未公开的、不应为本企业外所知悉的,能给本单位带来经济利益或竞争优势,具有实用性且本单位采取了保密措施的技术信息,包括但不限于设计图纸(含草图)、试验结果和试验记录、工艺、配方、样品、数据、制作方法、技术方案、计算机程序等。技术秘密可以是有特定的完整的技术内容,构成一项产品、工艺、材料及其改进的技术方案,也可以是某一产品、工艺、材料及其改进的技术方案,也可以是某一产品、工艺、材料等技术或产品中的部分技术要素。
第四章 技术保密管理规定
第七条 各单位对载有技术秘密的文件材料、图纸、磁(光)盘、图像、声像等资料及样品,必须注明保密和密级字样,并根据密级采取保密措施,归档保存,严格查阅、借阅制度。技术保密协议范本由精品信息网整理!
第八条 本单位科技人员、行政管理人员以及因业务上可能知悉技术秘密的人员或业务相关人员,必须与法人签订包括有保护技术秘密的《知识产权保护协议》。
第九条 在职职工和新调入职工应签而不同意签订包含有保护本单位技术秘密内容的《知识产权保护协议》的,本单位将予聘用的不予调入。
第十条 对列入确认为上级和本单位重大科技计划项目的计划任务书或者有关合同课题组成员名单的科技人员,在科研任务尚未结束前要求调离、辞职,并可能泄漏上级重大科技计划项目或科研任务所涉及的秘密,损害本单位利益的,原则上不予批准。确有特殊情况需调离、辞职的,需与单位再签保密协议,并专档跟踪履行情况。未经同意强行离职人员,列专档跟踪调查,一旦有违规,通过法律程序保护本单位合法权益。
第十一条 对本单位技术权益和经济利益有重要影响的有关行政管理人员,科技人员和其他相关人员,在离开本单位三年内,不得在生产同类产品或经营业务且有竞争关系或者其他利害关系的其它单位内任职,或者自己生产、经营与本本单位有竞争关系的同类产品或业务。
第十二条 有关行政管理人员,科技人员或者有关人员因各种原因离开本本单位时,其主管部门和人事部门应以书面形式向该人员重申其保密义务和竞业限制义务,并向其新任职的单位通报该人员在原单位所承担的保密义务和竞业限制义务。
第十三条 人事、组织部门在调入新职工时,应当主动了解该职工在原单位所承担的保密义务和竞业限制义务,以免侵犯他人的合法权益。
共2页,当前第1页12
篇13:项目技术负责人岗位职责经典
2.按照相关技术管理规定,参加与主持工程项目的设计交底和图纸的会审,作好会审记录,参与或主持项目的施工组织设计和施工方案的编制及修订工作;
3.规范施工现场及临时设施的布局;
4.主持处理施工的技术问题;
5.负责项目承建工作的设计变更等技术文件的处理工作;
6.负责撰写施工技术总结;
7.组织并主持关键工序、分项、分部工程的检验、验收工作;
8.领导交办的其他事项。
篇14:技术岗位竞聘书
感谢公司进行竞聘,使我能有机会站在演讲席上,也感谢在场的各位给予我参与这次竞聘演讲的勇气和力量。所以在此向各位真诚的道一声:谢谢!
我叫,自xx年毕业后就职于水泥有限责任公司。今天,我参加公司主管竞聘的演讲,大家会认为我太年轻,缺少资本,但是我为什么要站在这个竞聘的演讲台上,是因为我信奉"海阔凭鱼跃,天高任鸟飞",机会是靠自己去努力争取的,如果连竞聘的勇气都没有,那更不用说去搞好生产了,前辈们有前辈们的优势:丰富的实践经验和社会经验,而年轻人的优势在于接受新鲜事物快,思维方式能与时代同步。
三年以来,在这个大家庭里,通过前辈们的帮助,我成长了不少,其间我不仅积累了许多本专业的知识,并且学到了很多处理问题的实践知识。这些知识不管什么时候都是我的一个财富。我感谢他们。如果我有幸竞聘成功的话,我将努力做好以下几点:
一、环保管理
随着“环保城市”建设的推动,现代工业企业绿色环保生产必将被推上更高要求的台阶。因此,目前形势下,焦化生产行业的特点决定了环保管理在生产管理中无疑成了不可或缺的重点。
一般讲,焦炉生产过程中可能出现的环保污染问题主要是煤烟、荒煤气、黑烟等。而控制治理这些主要是从两方面入手,一是严格焦炉生产的各方面操作;二是适时地做好必要的投入、改造工作。
1.理清薄弱环节,梳理焦炉出现污染点的部位和环节,各岗位、各作业点齐抓共管形成合力,制止非环保性操作现象的出现。
2.增强“按岗位操作规程操作的规范性”的意识。关键是操作要到位,环保意识要增强。
3、加强日常检查、治理的力度,如炉墙的定期检查、燃烧状况的检查及炉墙的及时喷补、修补工作。
4、加强内部环保检查考核制度。
二、现场管理
现场环境卫生的整治,通过卫生区域划分到人,每天到现场检查督促,逐步改善现场的工作环境,为员工营造一个舒适的工作环境。设备卫生,每天带领1-2名新进人员进行一次现场设备的点检及设备卫生检查,安排落实专项设备保洁,逐渐改变设备卫生状况。
三、设备管理
每天和卫生检查同步,对设备进行一次技术巡检,查找设备运转中存在的问题及设备隐患,能及时处理的立即处理,不能处理的做好工作计划,利用停机时间集中处理,如存在大的隐患立即向领导汇报,确保设备运行最大程度的受控,避免设备事故的发生。
四、人员培训
中控操作是水泥粉磨的关键岗位,中控操作员的培训尤为重要,今后要主抓中控操作员的培训工作,包括理论知识、实践知识、设备工作原理等知识的培训。平时多讲解运行过程中出现的问题及如何有效高效解决。
五、安全管理
在今后的工作过程中谨记,“生产再忙,安全不忘,安全一忘,生产白忙”。这句话。同时通过班组安全活动也多向每位员工灌输这种安全意识,使他们从根上认识到安全工作的重要性。在设备检修时检查督促规范停送电制度,最大限度避免安全事故的发生。现场的消防设备每月不定期进行抽检。
最后如果我有幸竞聘上岗,我将竭尽全力,做好自己的工作,充实自己相应岗位的责任和技能,争取尽快使自己胜任
六、操作控制管理
适应焦炭市场需求、原料煤状况,外网用气状况等积极调整生产步调,适时调整结焦时间,适时合理调整配合煤比例适应外网用气量及焦炭产量,合理匹配优化生产,强化各方面管理,实现生产效益的最大化,是煤气厂日常生产运行的主题。
牢牢抓住生产工艺管理这条主脉,很好地把配煤、结焦时间、焦炉生产管理有机融组,采取了一系列科学有效的技术措施;优化现有煤源,在保证焦炭质量的情况下尽量降低入炉煤成本,强化在单炉效益中的最大化,兼顾配合煤指标:灰份、硫份、胶质层、粘结性、细度等在合理优化配煤上狠下功夫,收到良好经济效益。
加强焦炉规范化操作管理。
只有日常操作的规范化才能保证焦炉运行的正常化。
加强炉体的日常维修工作。
炉体维护的好坏是焦炉管理的一个重要方面,也是经济效益方面的一个体现;因此,规范日常各方面的操作管理是这一保证的关键;对此,加强了炉墙的日常检查、定期检查,并及时进行有计划性的喷补,此也是保证焦炉环保生产的一个方面。
加强对装煤、平煤、推焦日常操作的管理。
这三方面是焦炉日常生产中在空间、时间上的直观表现,是牵涉到有关焦炉加热制度的稳定、炉体维护等方面具体体现。
制定规定结焦时间下合理的加热制度。
在影响焦炭质量的操作方面狠下功夫,在一些日常操作的关键细节上下功夫。装煤必须装满、装平、装实、装均,装煤要做到少冒烟、跑火、少喷煤,减少环境污染;平煤时必须要平透,减少顶部生焦的出现。
再次感谢各位领导在百忙中抽出时间参加我的竞聘演讲,请大家多多支持,谢谢!
篇15:设备技术员岗位的职责描述
1.正常情况下,每天到生产现场巡查,指导和监督完成设备维护、润滑及验收等,并进行考核,发现问题及时处理;
2.定期征求生产一线意见,设计或改造生产及现场需要的工器具及制作件;
3.制定季、月、旬完成设备维护、润滑及检查等工作的计划措施;
4.每月月末为当月设备指标完成情况进行总结、分析会提供设备运行、维护、保养、安全情况分析报;
5.起草或编制设备管理工作计划、措施、规章制度、方案、报告和请示;
6.对外联系和协调设备维修、维护保养事项,解决、处理设备问题和紧急事件;
7.参加人员、质量、设备、工艺问题及事故分析会,提出意见并监督落实。
篇16:技术管理人员辞职申请书
尊敬的领导:
您好!我很遗憾自己在这个时候向公司提出辞职。来到公司已经有五年的时间了,从项目基建到生产运行,从作为一个职场新人到一名技术管理人员,在这很感谢各位领导的教导、照顾和无私的帮助,非常感谢经理您一直对我的栽培与信任。
但是在综合考虑个人发展和家庭问题上,我决定向公司领导提出辞职,本人也很遗憾未能长期为公司服务。祝愿公司能够在往后的发展中更上一层楼,事业蒸蒸日上!
现正式向公司提出辞呈,希望领导给予批准,谢谢。
此致
敬礼!
申请人:
申请日期:XX年XX月XX日
技术管理人员的辞职申请书范文二
尊敬的领导:
本人,男,xx岁,1994年xx省工业学校毕业,工程测量专业,XX年自学第二学历本科政法专业。XX年被聘为政工师,XX年取得注册安全工程师从业资格。
xx年从学校毕业来到公司,在工程科测量组担任测工,本身就是测量专业出身很快就成为测量组主力,参与测量的工程有600吨混铁炉工程、西炼钢工程、5号高炉大修工程等。
xx年被调到工程科工作。工程科当时人才济济,我负责小的工号比如冷凝器工程、制氧工程、75吨蒸汽锅炉工程等。因为时间较短没有什么成绩但也没有错误。
xx年由于公司定岗定编,工程科编制已满,许多人走了,都下到了车间工作,我那时因为公安科缺人,就去了公安科,在公安科一干就干到现在,因为现在我们部门也有保卫职能。公安科是个特殊部门,初来乍到并不适应,业务不熟,那时我就负责内勤、消防、户籍、综治、武装,因为公安科人少加我总共4人。从那时起开始写材料。因为还负责消防安全工作,所以也经常到施工现场检查。
xx年对于我公司还是我个人都是有历史意义的一年,这一年公司开始承包,这一年第一次参加高炉大修,而我在这一年却留下深深的遗憾。那是高炉大修中发生的事:高炉大修总工期70多天,从6月份一直到8月份,科里安排我去负责现场,由于科里人少,就科长和我两人,白天去工地夜间在科内值班,一干就四十多天没有回家,已经造的不成人样,一个该我值的夜班,丈母娘打电话让我回去吃饭我就回去了,吃晚饭顺便洗了个澡,因为我们值班要8点到,那天从工地回来已经很晚估计有7点多,加上来回路上小一个小时,等吃晚饭洗完澡到单位已经10点了,迟到2个小时,这在平时也许没什么,可正是那天高炉施工遇到困难,领导火烧眉毛,终于想到用炸药爆破方式解决问题,马上安排人去公安科领炸药时,公安科没人!那时没有手机,丈母娘家电话单位也不知道,干着急。虽然后来等我来了取了炸药,但是这件事后果非常严重,不光是高炉大修评先没有了,就连以前的工作都抹杀了。从此值班从不迟到,但好像要转变领导的印象不是那样容易的。
XX年终于迎来第二次高炉大修,那是在10月份,因为有了上次的教训,工作更加小心谨慎,心里想着从这里跌倒从这里站起来,拼了全部精力,不光检查防火、防盗后来还协助质检检查水冷管漏点
。功夫不负有心人,这次大修终于受到领导的好评,取得了年度先进生产者荣誉,我深深知道这荣誉真的来之不易,这是多少汗水换来的。
XX年开始公司走向改制,XX年改制第一年,这是新的开始也预示着一些东西的结束。公安科与安全科合并,这真是史无前例的创举!公安科每天要值班、安全科每天要下现场,真是最累、最苦的两个部门合并到一起,工资待遇并没有增加,反而奖金比以前少了。以前没接触安全工作,现在合并才知道安全工作是如此,合并后部门5个人,安全科有两人从事安全工作多年,公安科三人没有什么经验,不知从哪下手,就这样边学边干。XX年开始工伤事故突然多起来,XX年XX年XX年XX年XX年每年都有死亡事故。短短几年时间,死亡事故起,重伤轻伤就不用说了,触目惊心!有许多事故我是亲自到事故现场勘察、甚至目睹着伤者从抢救到死亡全过程,多少家庭瞬间解体,企业和职工也蒙受巨大损失。是的,我不否认我是个感性的人,当我看到死亡的工友从我身边象抬东西似的用破被包裹着抬走,我简直崩溃了,我抑制不了激动地情绪,我是多么不希望看到这一切啊!我付出的努力换来的就是这样结果吗虽然这些死亡的工友素不相识,都是农民工,安全意识极度缺乏,但是他们的死亡难道一点都与我无关吗监管不力、培训不力的管理责任是推脱不了的。我从心里感到愧疚,事故越多愧疚越深。所以近两年更是加倍努力决心要把工作做好,编写制度、起草文件、狠抓现场、开展培训,一心扑在工作上,不惜牺牲休息时间和家人团聚机会,每年值夜班70多个,双休日值白班30多个,比普通职工多上100个工作日以上。但是安全工作不是想象那样凭一己之力就能干好。说它大,无所不包含,可以说一切日常活动都涵盖在安全工作之中;说它小,小到一个工具、一台设备、一个违章行为,甚至一个螺丝、一个烟头。近年来国家、省、市不断加大安全工作治理力度,不断出台新政策、文件、法规、标准,其目的是让企业不敢出事故、出不起事故,因为事故会给企业带来巨额处罚甚至追究责任者刑事责任,可以说对待安全工作我每天都战战兢兢,生怕有纰漏,时间长了对救护车、消防车都产生恐惧感,当救护车、消防车从身边呼啸而过,头嗡的一声,很怕奔向单位方向。回想这么多年,上对不起父母,没有时常回老家看看,下对不起妻儿,没有时间多陪陪,十多年来没有成绩、无所建树,本以为竭尽全力可还是事故频出,所以本人深感心力憔悴,决心不再从事安全管理工作,请领导体谅。
此致
敬礼!
申请人:
申请日期:XX年XX月XX日
篇17:工程技术顾问聘用合同_合同范本
甲方:材料股份有限公司
乙方:
诚信合作是一切事业发展的基础,外部智力是企业进步的源泉。甲、乙双方经友好协商达成本协议,甲方愿意聘请乙方为特邀技术顾问,乙方愿按本协议内容与甲方合作。
一、聘用岗位及职责
甲方聘用乙方担任本公司的兼职技术顾问,乙方协助甲方有关方面负责人,在技术研究、产品研制和开发、技术革新和改进、技术培训、技术保密方面,给与技术指导和咨询服务工作。
二、聘用期及工作时间
聘用时间为期_____年,自_____年_____月_____日开始起算,至_____年_____月_____日截止。协议期满后,双方协商重新签订。
三、工作方式
(1)乙方采取兼职、不坐班的工作方式。甲方在日常生产、研发工作中,根据出现问题的具体内容和要求,结合乙方的专业技术特长情况,邀请乙方参加公司生产、研发的顾问工作或具体课题开发。
(2)甲、乙双方保证通讯畅通,方便乙方平时为甲方提供技术咨询服务。乙方每年提供不少于6次的到厂技术服务工作(如参加甲方有关技术会议、技术指导、技术培训等)。如需乙方参加甲方会议或负责培训的,甲方需提前一周告知乙方开会时间和会议内容(或培训时间和内容),以便乙方做好相关准备工作。乙方无特殊原因,需按时出席相关活动技术顾问聘用协议书技术顾问聘用协议书。
(3)乙方在日常工作中如有需要,可以甲方的名义进行相关的技术联络和信息收集,甲方给予必要的身份证明。
四、顾问工作费用
乙方的工作费为每月_____元人民币(包括各项费用)。由甲方在每月18日前支付。如因工作需要而发生差旅费、招待费等,按甲方的有关规定执行。甲方必须事先告知乙方,甲方有关规定。
五、技术成果及归属
乙方主要为甲方提供乙方在甲方兼职期间,因履行职务或者主要是利用甲方的物质技术条件、业务信息等产生的发明创造、产品、技术秘密或其他商业秘密信息,有关的知识产权均属于甲方所有。甲方可以在业务范围内充分自由的利用这些发明创造、产品、技术秘密或其他商业秘密信息,用于申请权利保护、生产经营或者向第三方转让,不和乙方共享。由此所产生的一切利益和结果,均由甲方自行持有和负责,与乙方无关。乙方尽可能的为甲方提供所需要的信息,由甲方自行办理、取得和行使有关的知识产权。乙方在离职后无权再继续使用该技术或转让该技术。
六、保密责任
1、乙方在兼职期间,承诺担当下列保密义务:
(1)乙方在兼职期间,必须遵守甲方规定的任何保密规章、制度,履行与其职位相对应的保密职责。
(2)未经甲方同意不得泄露、告知、公布、发布、出版、传授、转让或者其它任何方式使任何第三方(包括按照保密制度规定不得知悉该项秘密的甲方其他成员)知悉属于甲方或者属于他人但甲方承诺有保密义务的技术秘密或其他商业秘密信息。
(3)乙方承诺,在甲方兼职期间,非经甲方事先同意,不参与和甲方在生产、经营方面有利益冲突的单位服务。不做损害甲方利益的事情。
2、乙方离职之后的保密义务
乙方同意,乙方离职后仍对其在甲方兼职期间接触、知悉的属于甲方或者虽属于第三方,但甲方承诺有保密义务的技术秘密和其它商业秘密信息,承担如同兼职期间一样的保密义务和不使用有关秘密信息的义务,而无论乙方因何种原因离职技术顾问聘用协议书合同范本
淘宝精品
七、违约责任
乙方离职需提前一个月向甲方提出书面申请,甲方同意后并将相关工作内容及手续交接完成后,乙方可不再为甲方工作。离职时间计算,以工作内容及手续交接完成后时间为准。
甲方在要求乙方离职时,需要提前一个月告知乙方,以便乙方提前准备,做好交接工作。离职时间计算,以工作内容及手续交接完成后时间为准。
甲、乙任何一方违反本协议,并给对方造成经济损失,应承担违约赔偿责任。八、争议的解决
本协议经双方签盖公章后生效。因履行本协议发生争议,由争议双方本着互谅互让的原则,协商解决,如协商不成,提交泉州市仲裁委员会仲裁或者提交法院裁决。
本协议中未尽事宜,双方另行商定。
九、本协议一式两份,具有同等法律效力,甲乙双方各执一份。
甲方:(签章)
乙方:(签字)
签订日期:年月日
签订地:
篇18:涉外技术转让合同
范本 甲方为:中国_________公司 合同工厂:中国_________厂 乙方为:_________国_________公司(以下简称乙方)
第一章 合同内容
1.1 乙方同意向甲方提供制造_________合同产品的书面及非书面专有技术。用该项技术所生产的合同产品的品种,规格,技术性能如下所述:
1.
1.1 品种:_________
1.
1.2 规格:_________
1.
1.3 技术性能:_________
1.2 乙方负责向甲方提供制造,使用和销售合同产品的专有技术和其它所有有关技术资料。
1.3 乙方负责安排甲方技术人员在乙方工厂进行培训,乙方应采取有效措施使甲方人员掌握制造合同产品的技术。
1.4 乙方派称职的技术人员赴甲方合同工厂进行技术服务。
1.5 乙方同意在甲方需要时,以最优惠的价格向甲方提供合同产品的备件。届时双方另签协议。
1.6 乙方有责任对本合同项目甲方需要的关键设备提供有关咨询。
1.7 乙方应向甲方提供合同产品的样机,铸件和备件。
1.8 甲方销售合同产品和使用乙方商标的规定,见本合同
第八章。
第二章 定义
2.1 合同产品指本合同附件一中所列的全部产品。
2.2 蓝图指乙方制造合同产品目前所使用的总图,制造图样,材料规范及零件目录等的复制件。
2.3 技术资料是指为生产合同产品所必须具有的乙方目前正用于生产合同产品的全部专有技术和其它有关设计图纸,技术文件等。
2.4 标准指为制造合同产品向甲方提供的技术资料中,由乙方采用和制定的标准。
2.5 入门费指由于乙方根据本合同
第一章
1.2条,
1.3条,
1.4条,
1.6条,
1.7条规定的内容以技术资料转让的形式向甲方提供合同产品的设计和制造技术,甲方向乙方支付的费用。
2.6 提成费指在本合同有效期内,由于乙方所给予甲方连续的技术咨询和援助,以及甲方在合同有效期内连续使用乙方的商标和专有技术,甲方向乙方支付的费用。
2.7 合同有效期指本合同开始生效的时间到本通用版合同
4.3条规定的本合同终止时间的期间。
2.8 _________。
第三章 价格
3.1 按本合同
第一章规定的内容,甲方向乙方支付的合同费用规定如下:
3.
1.1 入门费为_________美元(大写)这是指合同产品有关的资料转让费和技术培训费,包括技术资料在交付前的一切费用。入门费为固定价格。
3.
1.2 合同产品考核验收合格后,甲方每销售一台合同产品的提成费为基价的_________%。甲方向乙方购买的零件不计入提成费。
3.
1.3 计算提成费的基价应是甲方生产合同产品当年____月____日有效的,乙方在_________国_________市公布和使用的每台目录价格的_________%。
3.2 乙方同意返销甲方生产的合同产品。返销产品的金额为甲方支付乙方全部提成费的_________%。返销的产品应达到乙方提供的技术性能标准。每次返销的产品品种,规格,数量,交货期由双方通过友好协商确定。 返销产品价格按
3.
1.3条规定的提成基价计算,即目录价格的_________%。
第四章 支付和支付条件
4.1 本合同项下的一切费用,甲方和乙方均以美元支付。 甲方支付给乙方的款项应通过_________中国和_________国_________银行办理。 如果乙方和甲方偿还金额,则此款项应通过_________银行和_________中国XX办理。 所有发生在中国费用,由甲方负担。发生在中国以外的银行费用由乙方负担。
4.2 本合同
第三章规定的合同费用,甲方按下列办法和时间向乙方支付:
4.
2.1 甲方收到下列单据,并审查无误后内向乙方支付入门费_________美元(大写)。 (a)由乙方出具保证函。在乙方不能按照合同规定交付技术资料,保证偿还_________美元。 (b)即期汇票正、副本各一份。 (c)应支付金额为入门费总价的形式发票正本一份,副本三份。 (d)乙方出具的
第一阶段产品的技术资料、样机、铸件和备件交付完毕的证明信正、副本各一份。
4.
2.2 甲方收到乙方交付
第二阶段产品的下列单据,并审查无误后内向乙方支付_________美元(大写)。 (a)即期汇票正、副本各一份。 (b)商业发票正本一份,副本三份。 (c)空运提单正本一份,副本三份。 (d)乙方出具的
第二阶段产品的技术资料、样机,附件五规定的_________已交付完毕的证明信副件各一份。
4.
2.3 合同产品
第一批样机验收合格后,甲方收到乙方下列单据,并审查无误后内,向乙方支付_________美元(大写)。 (a)即期汇票正,副本各一份。 (b)商业发票正本一份,副本三份。 (c)双方签署的合同产品考核验收合格证书影印本一份。
4.3 本合同
第三章规定的提成费,甲方将在抽样产品考核验收合格后按下述办法和条件向乙方支付。
4.
3.1 甲方在每日历年度结束后内,向乙方提交一份甲方在上____日历年度的每种型号的产品实际销售量的报告。
4.
3.2 乙方每年可派代表到合同工厂检查和核实甲方合同产品实际销售量的报告,甲方将给予协助。乙方来华费用由乙方负担。如果和或报告中所列的合同产品数量在检查时发现出入很大,则甲乙双方应讨论此差距并洽商采取正确的措施。
4.
3.3 甲方收到乙方下列单据,并审查无误后内向乙方支付提成费: (a)即期汇票正、副本各一份。 (b)商业发票正本一份,副本三份。 (c)该年提成费计算书一式四份。
4.
3.4 在合同期满年度内,甲方在合同终止后内将提交一份最后销售合同产品数量的报告,以便乙方计算提成费。
4.4 按本合同规定,如乙方需向甲方支付罚款和赔偿时,甲方有权从上述任何一次支付中扣除。
第五章 技术资料支付
5.1 乙方应在_________机场或车站交付技术资料。_________机场或车站的印戳日期为技术资料的有效交付日期。甲方应在收到资料两周内,确认资料收悉。
5.2
第一阶段产品的技术资料、样机、铸件和备件。
5.
2.1 在合同生效后的_________周内,乙方必须发出一套蓝图,一套二底图和一套标准。可以分批交货。
5.
2.2 在合同生效后的_________周内,乙方必须发出与
第一阶段合同产品有关的全部技术资料、样机、铸件和备件。
5.3
第二阶段产品的技术资料和样机。
5.
3.1
第二阶段开始后的_________周内,乙方必须发出与
第二阶段产品有关的一套蓝图,一套二底图和一套标准。可以分期交货。
5.
3.2
第二阶段开始后的_________周内,乙方必须尽快发出与
第一阶段合同产品有关的全部技术资料和样机、铸件和备件。
5.4 在每批技术资料或样机,铸件和备件发运后的_________小时内,乙方应将空运提单号,空运提单日期,资料编号,合同号,件数和重量电告甲方。同时乙方应以航空信将下列单据寄给甲方: (a)空运提单正本一份,副本两份。 (b)所发运技术资料,样机,铸件和备件的详细清单一式二份。
5.5 若乙方提供的技术资料或样机,铸件和备件在运输途中遗失和损坏,乙方在收到甲方关于遗失或损坏的书面通知书后,应尽快不迟于_________个月内补寄或重寄给甲方。
5.6 交付技术资料应具有适于长途运输,多次搬运、防雨、防潮的坚固包装。 在每件包装箱的内部与外表,都应以英文标明下列内容: (a)合同号 (b)运输标记 (c)收货人 (d)技术资料目的地 (e)重量(千克) (f)样机,铸件和备件目的地
5.7 每箱内应附有详细装箱单一式四份。
第六章 技术资料的改进和修改
6.1 为了适应中国的设计标准,材料,工艺装备和其它生产条件,在不改变乙方基本设计的条件下,甲方有权对乙方的技术资料进行修改和变动。甲方必须将这些修改和变动通知乙方。乙方有责任在培训或技术指导时协助甲方修改技术资料。
6.2 甲方必须在型号后加注尾标,以示区别那些影响形状,配合或功能的修改,并通知乙方。
6.3 合同有效期内,双方在合同规定的范围内的任何改进和发展,都应相互将改进发展的技术资料提交给对方。
6.4 改进和发展的技术,所有权属改进、发展的一方。
第七章 质量验收试验
7.1 为了验证按乙方提供的技术资料制造的合同产品可靠性,由甲,乙双方共同在合同工厂对考核的合同产品的技术性能和要求进行考核验收。如果需要,也可以在乙方工厂进行试验或重做。甲方可派指定的人员验证重复试验,乙方负责重复试验和乙方人员的费用,甲方负责甲方参加重复试验的人员和翻译的费用。
7.2 考核试验产品的技术性能应符合乙方提供的本合同中的标准规定,即通过鉴定。甲,乙双方签署合同产品考核验收合格证明一式两份,每方各执一份。
7.3 如考核试验产品的技术性能达不到附件规定的技术参数,双方应友好协商,共同研究分析原因,采取措施,消除缺陷后进行
第二次考核验收。
7.4 如考核试验产品不合格是乙方的责任,由乙方派人参加
第二次考核验收的一切费用,由乙方负担。如系甲方责任,该费用则由甲方负担。
7.5 如考核试验产品
第二次试验仍不合格时,如系乙方的责任,乙方应赔偿甲方遭受的直接损失,并采取措施消除缺陷,参加
第三次考核,费用由乙方负担。如系甲方责任,该费用由甲方负担。
7.6 若考核试验产品
第三次考核试验不合格时,双方应讨论执行合同的问题,如系乙方责任,则按合同
9.8条规定,甲方有权修正合同。如系甲方责任,则由双方共同协商进一步的执行问题。乙方将根据甲方的要求,为改进不合格的样机提供技术咨询。
第八章 合同产品的出口和商标
8.1 甲方生产的合同产品可在中华人民共和国国内销售,可根据下列条件出口到其它国家:
8.
1.1 甲方应首先与乙方协商,要求在乙方的销售分配网所在地区安排销售(销售,分配网包括乙方子公司和代理商)。出口销售的.数量和项目将通过友好协商决定,若无法安排,则甲方可以自由出口,但是,甲方必须在完成交易后一周内,将项目,数量和购买商名称通知乙方。
8.
1.2 在乙方销售分配网不包括的地区,甲方可以自由销售。
8.2 对于甲方把合同产品装在中国的主机上出售到任何国家(包括在乙方销售分配网所在地国家)的权利,乙方不得干涉。为维修中国出口的主机,甲方可以自由销售作为配件的合同产品。
8.3 在合同期间,甲方可以在合同产品上使用乙方使用的商标和标上甲方的商标,并注上中华人民共和国_________厂制造。商标许可证应由甲方和_________公司单独签订。
8.4 当使用商标时,甲方生产的合同产品必须符合本合同项下由乙方提供的标准。在必要的时候,每年乙方可进行一次抽样试验。在抽样试验结果不符合乙方提供的标准时,乙方应建议甲方改进不合格的合同产品并在_________个月内再次进行试验。若结果仍不符合,则乙方就可中止甲方使用其商标的权利。甲方可再次提交另外的样品给乙方进行试验。再次抽样试验,结果符合乙方提供的标准时,乙方将再次给予甲方使用其商标的权利。
第九章 保证
9.1 乙方保证其提供的技术资料是在合同生效时乙方使用的技术资料。在合同期间,合同产品设计变化的技术通知书和技术改进、发展资料,乙方将及时地送至甲方。
9.2 乙方保证其提供的技术资料是完整的,清晰的,可靠的,并按
第五章的规定按时交付。有关定义如下:
9.
2.1 完整系指乙方提供的资料是本合同附件中规定的全部资料,并与乙方自己工厂目前使用的资料完全一致。
9.
2.2 可靠系指甲方按技术资料制造的合同产品应符合乙方按本合同提供的合同产品技术规范。
9.
2.3 清晰系指资料中的图样,曲线,术语符号等容易看清。
9.3 如果乙方提供的技术资料不符合
9.2条的规定时,乙方必须在收到甲方书面通知书后内将所缺的资料,或清晰,可靠的资料寄给甲方。
9.4 当乙方不能按本合同
第五章或
9.3条规定的时间交付资料,则乙方应按下列比例向甲方支付罚款。 迟交_________至_________周,每整周罚款为入门费总价的_________%。 迟交_________至_________周,每整周罚款为入门费总价的_________%。 迟交超过_________周以上,每整周罚款为入门费总价的_________%。
9.5 若发生
9.4条事项,乙方支付给甲方的罚款总数不超过_________美元(大写)。
9.6 乙方支付给甲方的
9.4条中规定的罚款,应以迟交的整周数进行计算。
9.7 乙方支付给甲方罚款后,并不解除乙方继续交付上述资料的义务。
9.8 按
第七章的规定,由于乙方的责任,产品考核经三次不合格时,则按以下办法处理:
9.
8.1 若考核产品不合格时以致甲方不能投产,则必须修改合同,采取有效措施将不合格的产品从合同中删除。乙方应退还甲方已经支付的那部分金额。这部分退还金额仅限于合同产品总的范围中不合格产品所占部分。并加年利_________%的利息。
9.
8.2 如果根据
9.
8.1条修改合同,则甲方放弃只涉及不合格的那部分产品和零件的制造权,甲方将退回有助于制造这些不合格产品的全部文件,不可复制或销毁。
第十章 许可证和专有技术
10.1 乙方保证自己是根据本合同规定向甲方提供许可证和专有技术的合法者,并能够合法地向甲方转让上述许可证和专有技术而无任何
第三者的指控。 如果
第三方提出侵权的控诉,则乙方应与
第三方处理此控诉并负责法律和经济责任。
10.2 与本合同有关的完整的_________国专利清单列入附件,本合同生效一个月内,乙方将向甲方提供专利影印本一式二份,但不给予_________国专利许可证或应不包括此许可证。
10.3 本合同终止后,甲方仍有权使用乙方提供的许可证和专有技术,而不承担任何义务和责任。合同终止后,使用_________商标的权利也将终止。
10.4 双方都应履行本合同,不应以任何方式向任何
第三者透露和公布双方提供的任何技术资料或商业情报。
第十一章 税费 1
1.1 凡因履行本合同而引起的一切税费,发生在中国以外的应由乙方承担。 1
1.2 在执行合同期间,乙方在中国境内取得的收入应按中国税法缴税。此税费由甲方在每次支付时扣交,并将税务局的收据副本一份交乙方。
第十二章 仲裁 1
2.1 凡因执行本合同而引起的一切争执,应由双方通过友好协商来解决。在不能解决时,则提交仲裁解决。 1
2.2 仲裁地点在北京,由中国国际贸易促进委员会对外经济贸易仲裁委员会按该会仲裁程序暂行规则进行仲裁。 1
2.3 仲裁裁决应是终局裁决,对双方均有约束力,双方都应遵照执行。 1
2.4 仲裁费由败诉一方负担。 1
2.5 在仲裁过程中,本合同中除了接受仲裁的部分外,仍应由双方继续执行。
第十三章 不可抗力 1
3.1 若签约的任一方,由于战争及严重的火灾,水灾,台风或地震所引起的事件,影响了合同的执行时,则应延迟合同期,延迟时间应相当于事故所影响的时间。 1
3.2 责任方应尽快地将发生的人力不可抗拒事故电告另一方,并在内以航空挂号将有关当局出具的证明文件提交另一方确认。 1
3.3 若人力不可抗拒事故延续到以上时,双方应通过友好协商尽快解决合同继续执行问题。
第十四章 合同生效及其他 1
4.1 合同在甲方和乙方代表签字之后,双方需向各自政府申请批准,并以最后批准一方的日期作为生效日。双方应尽最大努力在X期限内获得批准。并用电报通知对方,随之以信件予以确认。若合同签字后_________个月内不能生效,由本合同对甲方和乙方都无约束力,经双方同意,申请批准的期限可以延长。 1
4.2 本合同用_________文和中文书写各四份,_________文文本和中文文本具有同等效力。双方执中、_________文文本各二份。 1
4.3 本合同从合同生效之日起________年内有效。有效期满后,本合同即自动失效。除非在合同有效期内双方另有协议,
第二阶段合同产品开始日期将由乙方来华指导时,双方签订备忘录予以确认。 1
4.
3.1 合同期满前_________个月之前的任何时候,甲方或乙方均可提出要求进行合同延期的谈判,届时签订合同延期的专门条款。 1
4.4 合同
第一阶段在合同生效之日开始,合同
第二阶段的开始日期预期为合同生效后的第_________个月。 1
4.5 合同终止前,任何合同项下发生的未清理的赊欠和债务将不受合同终止的影响。合同的终止并不能解除债务赊欠一方对另一方的债务。 1
4.6 本合同附件均为本合同不可分割的部分,与合同正文具有同等效力。 1
4.7 合同签字前双方之间的所有来往通讯文电,从合同生效之日起自动失效。 1
4.8 只有根据双方授权代表签字的书面文件才能对本合同进行更改和补充。这些文件将成为合同不可分割的部分。 1
4.9 双方为履行本合同而进行的通讯应以_________国文书写一式二份。 1
4.10 在对方预先没有同意前,双方不应将本合同的任何权利和或义务转让给
第三方。 1
4.11 本合同中的任何条款并不影响_________国和任何其他国家之间的贸易。 1
4.12 甲方同意从乙方购买一批(原材料或半成品),以便甲方生产合同产品,金额为_________美元(大写)。特定零件的订货和计划由考察小组在_________国确定,如价格和条件优惠,甲方将从乙方再订一批(原材料或零件)。
第十五章 法定地址 甲方:中国_________公司 地址:_________ 电话:_________ 合同工厂:_________ 地址:中华人民共和国_________省_________市 电话:_________ 乙方:_________国_________公司 地址:_________ 电话:_________ 甲方(盖章):_________
_________工厂(盖章):_________ 甲方律师(签字):_________
代表(签字):_________ ________年____月____日
________年____月____日 签订地点:_________
签订地点:_________ 乙方(盖章):_________ 乙方律师(签字):_________ ________年____月____日 签订地点:_________
篇19:项目技术负责人岗位职责经典
职责:
1. 负责产品需求的开发和迭代优化;
2. 完成软件功能的设计与开发,提升技术性能与用户体验;
3、负责规划开发团队整体的建设方向和架构;
4、带领技术团队,完成开发项目的开发任务;
5、负责完成技术难题攻关,为技术团队提供技术支持和培训,以及新产品模块的开发。
任职资格:
1. 精通后端Spring Cloud、MyBatis等开发框架;熟悉各种设计模式; 熟练使用版本管理(GIT/SVN)、协作工具(Jira/Mantis);
2. 熟练使用Oracle、MySql、MongoDB等常用数据库及Memcached/Redis等常用缓存技术;
3. 对Nginx/Tomcat/zookeeper/rabbitmq 等常用应用服务器/中间件要有具体的配置和使用经验;
4. 有独立完成复杂业务模块的设计与实现的经验,优化代码并保持良好的升级兼容性;
5. 有强烈的上进心和求知欲,善于学习和运用新知识,善于沟通和逻辑表达,有强烈的团队意识和执行力,抗压性好;
7、具备带领团队的能力;
8、有运营商&通讯行业工作经验,了解通讯协议以及相关协议开发经验优先,
9、熟悉了解前端和移动端开发框架,有相关实际经验优先,包括不限于Vue, jQuery;
10、有实际的微服务架构设计经验, 熟悉主流的RPC协议;