0进口设备委托代理采购合同书
甲方（委托方）：
法定代表人：
地址：
乙方（代理方）：
法定代表人：
地址：
根据《中华人民共和国民法典》及其他有关法律、行政法规的规定，甲、乙双方遵循平等、自愿、公平和诚实信用的原则，就商品订购事宜协商订立本合同。
一、委托代理采购范围：
乙方委托代理采购范围为：
代理采购总信用额度为：
二、货款、代理费用、资金占用费及相关费用的计算方法：
1、货款：以乙方向供货商实际支付采购金额为准;
2、以乙方向供货方付款之日起计算，单笔支付金额账期最长不超过____天;
3、资金占用费及支付时间：为乙方向供应商实际支付采购金额的____% （按年计算），以乙方向供货方付款之日，按月计算利息（不足一月按实际占用天数计算），在甲方支付乙方货款时一并支付。
4、相关费用及支付时间：因代理采购所产生的相关费用（包括但不限于：货物进口税费、报关费、提货费、保险费、运输费、其他杂费）均由甲方承担，甲方应在发生相关费用前汇入乙方指定账户，如由乙方垫付的，甲方应在乙方垫付后___日内将相关款项汇入乙方指定账户。
三、支付要求和结算方法：
1、本合同签订后乙方应按甲方提供的采购合同要求，在___日内向甲方指定的供应商支付货款，进行采购;
2、甲方应向乙方提供支付货款所需的所有材料，包括购货合同、采购清单、发票等;
3、甲方应在账期到期前向乙方支付全额货款和资金利息;
4、发票开具：乙方每月根据甲方回款情况开具发票（发票金额含代理费用和资金占用费、资金利息及其他相关费用）。
四、货权
在甲方向乙方付清全部代付款项之前，相应金额的货物所有权归乙方所有;在甲方向乙方付清全部代付款项之后，货权自动转移给甲方。
五、双方权利义务：
乙方的权利义务：
1、 以乙方的名义与供应商签订产品购销合同，甲方接受该购销合同所有条款，乙方仅负责接收委托与供应商签订产品购销合同，并按合同约定在乙方给予甲方的信用额度内支付货款，以及按本合同约定向甲方转移货权，其他具体合同履行内容只对甲方负有协助义务，因本合同之外的第三方造成的后果与乙方无关。
2、在甲方未按协议向乙方付清货款及其他全部款项之前，乙方保留相应货物的所有权。
3、因甲方原因致使产品购销合同或本合同不能履行、不能完全履行或迟延履行的，乙方有权解除本代理合同，并享有对货物的处臵权，甲方应承担由此产生的一切费用和后果。
4、甲方自行处理供货方在品质、价格、运输、装卸、仓储方面存在的问题，并承担相应风险。
5、因供应商原因致使合同不能履行或不能完全履行，乙方应及时通知甲方采取补救措施。如甲方书面要求索赔的，乙方应根据其合同，积极协助甲方对外索赔，甲方承担由此产生的一切费用和后果，并应在索赔前，依据乙方书面通知将相关费用划至乙方账户。若甲方未支付有关索赔费用，则甲方丧失享有索赔产生的权利，但并不免除因索赔而产生的义务。上述义务包括但不限于承担乙方先行代垫的律师费、诉讼费、仲裁费、差旅费、通讯费。
6、若甲方发生未偿付所欠的款项等违约事项，乙方有权终止协议中的义务。
甲方的权利义务：
1、保证所委托采购的货物符合国家政策法律规定，并保证所委托采购的货物不侵犯他人的知识产权，否则应承担由此产生的一切经济和法律责任。
2、甲方应严格按本合同第二条、第三条约定向乙方支付货款及资金利息，或其它有关费用。
3、甲方自行与供应商商定品种、规格、质量、价格、运输、装卸等事宜，乙方根据甲方确定的内容与供应商签订产品购销合同。乙方与供应商签订的产品购销合同，甲方均承担相应后果，包括但不限于本合同约定的情形。
4、甲方有义务要求供应商按约供货，并承担供货商迟发、不发、错发、少发货物及货物质量问题、货物价格变化、货物交付甲方之前及之后的所有风险，其他非乙方原因致使乙方不能履行本合同或履行与本合同不符产生的责任后果与乙方无关，同时甲方不得以此拒绝向乙方支付全部货款和资金利息，如同时造成乙方直接、间接损失的，甲方在乙方发出书面通知后____日内无条件赔偿，否则即为甲方违约。
5、对供应商资信负责，承担因供应商原因致使合同不能履行、不能完全履行的一切责任。前述供方违约导致本合同不能履行或不能完全履行，不影响本合同项下代理方收取全部货款和资金利息的权利。
6、若乙方发现甲方或供货方有以合同形式套用乙方资金或有其他欺骗嫌疑的，乙方有权要求甲方立即付清全部货款、资金利息及相关费用，同时有权终止或解除合同，甲方自行承担合同终止或解除的后果及损失，并与供货方一起对乙方的损失承担连带赔偿责任。
六、违约责任
甲方在账期到期后未向乙方支付全部货款和资金利息，甲方每逾期一日支付乙方逾期金额___%的违约金。
七、争议解决方式
委托代理过程中发生纠纷，由双方协商解决，协商未果的，由__________法院管辖。
八、其他
1、本合同一式两份，甲乙双方执一份，经双方签章后生效，双方不得单方面解除或终止合同。如有未尽事宜须补充或修改的，应以书面提出并经双方签章后生效。
2、若本合同或其他合同下甲方有违约行为或应付款项未付，乙方有权将本合同下货物直接抵扣或处臵或暂停交付，并有权决定本合同是否履行、终止或解除，因此产生的责任由甲方承担。
甲方：
授权代表：
______年___月___日
乙方：
授权代表：
______年___月___日
更多相似范文
篇1：国际贸易进出口合同_合同范本
sales contract ( original )
contract no. date: signed at:
sellers:
address:
tel: fax: e-mail:
buyers:
address:
tel: fax: e-mail:
约首： this sales contract is made by a nd between the sellers a nd the buyers whereby the sellers agree to sell a nd the buyers agree to buy the under—montioned goods according to the terms a nd conditions stipulated below:
name of the commodity, specifications, packing term
quantity
unit price
total amount
white rice, long-shaped
broken grains ( max.)
25% admixture ( max.)
0.25% packed in gunny
bags of 50 kilos each
1 000 m/t
usd 200 per m/t cif new york
two hundred thousand us dollars only
shipment 3% more or less at seller’s option and the price shall be calculated according to the unit price
麦头： shipping mark
to be designated by the sellers / at the sellers’ option.
保险条款： insurance
在fob, cfr 合同下，保险条款可订为：
insurance to be covered by the buyer.
在cif 合同下，保险条款可订为：
insurance to be covered by the sellers for 110% of the invoice value against w.p.a / all risks / war risk including shortage in weight as per a nd subject to the ocean marine carge clauses of the people’s insurance company of china dated jan. 1, 1981. if other coverage o r an additional insurance is required, the buyers must have the consent of the sellers before shipment, a nd the additional premium is to be borne by the buyers.
装运条款： shippment
time of shipment: during feb./mar. in two equal monthly lots
port of loading / shipment :
port of destination :london. transhipment at hongkong allowed.
the carrying vessel shall be provided by the sellers. partialshipment a nd transshipment are allowed. after loading is completed, the seller shall notify the buyers by cable of the contract number, name of commodity, name of the carring vessel a nd date of shipment.
付款条件： terms of payment
the buyers shall open with a acceptable to the sellers an irrevocable sight letter of credit to reach the sellers 30 days before the month of shipment, valid for negotiation in china until the 15th day after the month of shipment. ( export )
by irrevocable letter of credit for 90% the total invoice value of the goods tb be shipped, in favour of the sellers, payable at the issuing bank against the sellers’ draft at sight accompanied by the shipping documents stipulated in the credit. the balance of 10% of the proceeds is to be paid only after the goods have been inspected a nd approved at the port of destination. ( import )
by confirmed, irrevocable letter of credit in favor o9f the sellers payable at sight against presentation of shipping documents in china , with partial shipments a nd transshipment allowed. the covering letter of credit must reach the sellers 15 days before the contracted month of shipment6 a nd remain valid in the above loading port until the 15th day after shipment , failing which the sellers reserve the right to cancel the contract without further notice a nd to claim against the buyers for any loss resulting there from.
共4页，当前第1页1234
篇2：进口食品类委托合同书
合同编号：京典B_______号
甲方：____________________有限公司（以下简称甲方）
乙方：____________XX公司（以下简称乙方）
经甲乙双方协商就____________产品申报保健食品相关事宜达成如下合同 ：
一、双方约定
1.甲方同意将____________产品的申报工作全权委托____________医药科技有限公司办理。
2.在申报过程中双方相互协商、相互协助。
3.乙方为甲方保守秘密，不得将配方、工艺、质量标准等甲方所提供的资料泄露他人。
4.在申报期间若实验费、评审费、申报流程及要求等因政策调整，按新政策执行，双方不负任何责任。
二、双方责任
1.甲方向乙方提供申报产品的相关资料（产品配方、详细工艺、原料来源及检测报告等相关资料）。
2.甲方需向乙方提供送检必备资料（产品配方、详细工艺、规格及服用方法、申报企业相关信息和送检样品等），乙方方可安排送检工作。
3.甲方向乙方提供代理费共计人民币____________万元。
4.乙方负责____________的产品申报、资料整理、相关咨询等全部申报工作。
5.自合同生效日起至____________个月内完成申报前的准备工作，并报药监局终审。
6.药监局受理后____________个月内取得保健食品批准证书。
7.如在实验期内发现产品本身存在问题，乙方应及时通知甲方，讨论解决办法，如需重做实验，其费用将由甲方承担。
三、经费支付方式
1.自合同生效日起3日内，甲方向乙方支付代理费共计人民币____________万元。
2.取得药监局受理通知书后3日内，甲方将评审费汇至评审_____通知书上指定的帐号。同时向乙方支付代理费共计人民币_____万元。
3.取得药监局颁发的保健食品批准证书后3日内，甲方向乙方支付代理费共计人民币____________万元。
4.乙方以书面形式通知甲方，甲方取得通知后3日内，直接向检测机构或相关机构支付实验费或加工费等，乙方并向相关机构索取发票提供给甲方。
5.乙方在确定收到甲方所汇每笔代理费用后出具相应数额收据。
四、违约及其它
1.如因乙方责任致使实验终止或申报失败，乙方将退还甲方所支付的代理费用。
2.如因乙方原因致使甲方申报资料失秘，乙方将支付甲方违约金____________万元整人民币。
3.如甲方延迟支付本合同规定的各项款项，将按每日千分之叁（3‰）违约金支付给乙方，若超过30日以上乙方有权终止合同，甲方必须在3日内补足实验费和代理费。
4.如甲方延迟支付产品加工费、实验费及评审费等申报产品的所需费用，产品申报周期将按延迟到款周期续延，乙方不付任何责任。
5.如因乙方原因导致申报延期，将按每日千分之叁（3‰）违约金支付给甲方，如超过30日以上甲方将有权终止合同，并要求乙方退还甲方所支付的费用。
6.政策的改变或不可抗原因致使申报受阻或申报失败，甲乙双方都不承担责任，应视具体情况协商解决。
五、本合同一式两份，甲乙双方各执一份。
甲方单位盖章：____________ 乙方单位盖章：____________
甲方代表人签章：__________ 乙方代表人签章：__________
________年______月______日 ________年______月______日
篇3：FDA进口预申报委托协议_合同范本
FDA进口预申报委托协议
fda进口预申报委托协议
fda进口预申报委托协议
甲方：______________________________
乙方：______________________________
鉴于甲方产品需（或准备）向美国出口，并希望乙方为其提供向fda进口预申报等相关服务。乙方作为美国fda进口预申报代理机构，愿意根据fda的要求及本合同的约定，帮助甲方完成其在fda的进口预申报等工作。为此，根据《中华人民共和国合同法》之规定，合同双方就fda进口预申报一事协商一致，签订本合同。
一、委托事项
甲方同意接受《办理fda进口预申报合同补充条款》（见附件a），委托乙方在美国办理fda进口预申报事宜。乙方接受甲方的上述委托，乙方在办理fda事务业务时，仅作为甲方的代理，注册的所有结（后）果由甲方享有和承担。
二、 甲方在申请fda进口预申报应提交以下资料
1.《fda进口预申报申请表》中文（或英文）一份；
2.fda新增加的要求需提交的其他文件、资料。
三、工作流程和办理注册期限：
1.工作流程：a.甲方提交“二”中所列资料；b.乙方审核合格后及时向fda申报；c.将结果通报甲方。
2.办理进口预申报期限：在甲方所提交的所有资料完整、签订《fda进口预申报委托代理协议》和付清款项后，自受理之日起____个工作日内完成，并立刻通知甲方。
四、服务费用
进口预申报的费用：采取年费、季费或按次付费方式：
1.年费方式：出口货物全年发运申报包干服务费为_______美元。一年内负责通报______次，多于_____次的每多申报一次收费____美元。
2.季费方式：每季度（_______个月）申报包干服务费为_______美元。每季度内负责通报____次，多于____次的每多申报一次收费_______美元。
3.按次付费方式：每次委托申报费用为_______美元。
上述预付金额如用人民币支付，按付款当日官方汇率换算。
五、费用支付
按年度付费方式：fda进口预申报年度代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户一次性支付上述代理费。
按季度付费方式：fda进 口预申报季度代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户一次性支付上述代理费。
按次付费方式：fda进口预申报每次代理费用，甲方应在本合同签订后的_______个工作日内，向乙方指定帐户预付上述代理费。
如甲方迟纳服务费用，乙方将不对其申报文档进行处理，直到款到为止。由此造成的损失，由甲方自行负责。
六、合同组成部分
本合同附件a本合同的组成部分。本合同自签字之日起生效，有效期一年。正本一式二份，双方各执一份，具有同等法律效力。
甲方（公章）：_____________ 乙方（公章）：_____________
委托代理人（签章）：_______ 委托代理人（签章）：_______
联系电话：_________________ 联系电话：_______________
地址：_____________________ 地址：_____________________
邮编：_____________________ 邮编：_____________________
电子邮件：_________________ 电子邮件：_________________
公司帐号：_________________
开户行：___________________
_______年_______月_______日 _______年_______月_______日
附件a
办理fda进口预申报合同补充条款
一、合同缔约各方的责任和义务
1.甲方（委托方）责任和义务：
（1）及时提供fda注册所需文件、资料，在办理进口预申报过程中积极配合乙方工作，包括但不限于补充、补正相关文件、资料，以及执行fda对产品标识等方面的要求；
（2）按合同规定时间足额支付代理费用；
（3）保证提交的文件、资料真实、准确和完整，并不含有对任何第三方的侵权内容；
（4）甲方承诺因其所提交的文件、资料与实际不符或故意隐瞒真实情况，由甲方自行承担未正常注册的损失，给乙方带来损失的，应予赔偿；
（5）不以乙方的名义实施任何行为，或者从事任何其他有损乙方利益的行为；
（6）企业进口预申报完 成后，甲方提出再次申报，视为另次委托。
2.乙方（受托方）责任和义务：
（1）对甲方提供的文件、资料进行整理、审译，向fda办理申报；
（2）对甲方提交的文件、资料进行指导，在甲方要求和自费的前提下提供专项培训；
（3）接收、传递fda的有关文件和要求，并与甲方沟通；及时向甲方通报办理进度和结果；
（4）乙方承诺因乙方原因致使未办成的，全额退还代理费，退还限额不高于向甲方收取的费用。但不承担因此给甲方造成的损失；
（5）乙方获得仅限于合同约定范围内代理甲方fda进口预申报业务的权限，不得从事与代理业务无关的事项。
二、独立缔约方
本合同任何内容均不应被理解为在双方之间建立某种独立缔约方以外的关系，双方均为独立缔约方，并不对彼此之间的行动或疏忽承担赔偿义务。各方均不被视为是对方或对方其他下属公司的雇员或代理。各方均无权以任何方式，以对方或其下属公司的名义行事。作为独立缔约方，各方应缴纳各自的税赋并保证自己的必要的保险。
三、保密
任何一方不得将对方的非公开商业信息、资料（包括经营、生产、技术、管理等），以任何方式泄露给第三方，但得到对方书面同意或根据法律要求的除外。
四、争议处理
因履行本合同发生的争议，各方应协商解决。如不能达成协议的，提交中国国际经济贸易仲裁委员会并依该会仲裁规则仲裁解决，该仲裁裁决是终局的，对双方均具有约束力。
五、合同撤消和修改
在合同有效期内，合同一方要求撤消本合同的，应以书面通知对方，经协商一致后予以撤消。已受理申报（以乙方发出《受理确认书》为准）的不退还代理费。
在合同有效期内，合同一方要求修改、补充合同内容的，经协商一致后签定补充合同。
六、其他
由于政府行为、自然灾害等不可抗力等非任何一方的原因造成本合同无法履行或迟延履行的，受阻方应当在合理期限内将该情况通知对方，并出具相应的证明，因此造成的损失，彼此不承担对方的损失赔偿责任。
fda进口预申报委托协议
fda进口预申报委托协议
篇4：出口独家代理合同
制造商：__________________________公司(以下简称甲方)
代理商：__________________________公司(以下简称乙方)
甲乙双方经友好协商，就乙方在指定区域独家代理甲方产品达成以下协议：
一、代理权限
1、甲方授予乙方在_____________省范围内代理甲方现有系列产品，包括_____________。甲方其他产品由双方协商决定是否纳入代理范围。同等条件下乙方有优先权。
2、乙方只能在指定区域内销售，不得有任何向区域外销售的行为。
3、本合同生效后一年内，乙方成为甲方临时代理商。临时代理商除区域独家代理权外，享受同正式代理商一样的权利。甲、乙双方合作期满一年后，由甲方签发独家代理证书，自此乙方在指定区域内享受独家代理权。
4、乙方成为正式代理商后，在指定区域内为甲方唯一代理，甲方不得有其他代理商参与乙方竞争。
5、除非和甲方有事前协议，否则乙方不得向指定区域以外或虽属指定区域以内，但有理由认为其最终销售目的地在指定区域以外的客户销售其代理的甲方产品。
6、除非和乙方有事前协议，否则甲方不得向指定区域以内、除乙方以外的任何公司或个人出售由乙方代理的产品，也不得向那些虽属指定区域以外，但有理由认为其最终销售目的地在指定区域以内的任何公司或个人出售其由乙方代理的产品。
7、指定区域内，乙方不得擅自更改甲方产品设计，或委托其他厂商仿制甲方产品进行非法牟利，一经发现，甲方将无限期取消与乙方合作，并追诉乙方法律责任。
8、乙方作为甲方在指定区域内的独家代理，无论为何目的，乙方及其雇员均非甲方的代理人，无权代表甲方。
二、质量技术保证
甲方销售给乙方的产品为符合生产质量技术规范的合格产品。如甲方销售给乙方的产品达不到以上承诺，甲方负责赔偿乙方所订产品。同时，因保管不善导致的货物发霉、生锈不在甲方质量技术保证范围内。
三、产品价格
1、代理产品的价格为甲方给代理商的最优惠的统一代理价格。甲方承诺提供给乙方的产品，其价格具有市场竞争力，即与其他同类产品比较具有较高的性价比。由于甲方产品的最终销售由乙方实现，甲方将根据乙方及乙方用户的要求，针对每一类产品的具体要求，及时提供给乙方指导或参考性价格。乙方所指定的最终售价，原则上不应低于甲方报出的最低价格线(甲方同意的除外)。
2、在本协议签字之日，甲方须提交乙方壹份详细的产品价格清单，该清单包括甲方与乙方结算的最低价格及市场用户参考价格。
四、代理折扣及结算
1、如果是甲方与乙方用户直接签署供货及服务合同的，甲方根据合同价格、付款进度确定乙方的代理费用。在保证正常付款前提下代理费用计算方法为：
(1)、合同额等于公司最低价：
代理费用=合同额×_____________。
(2)、合同额高于公司最低价50%以内(含50%)
代理费用=最低价×_____________+(合同额-最低价)×_____________。
(3)、合同额高于公司最低价50%以上部分
代理费用=最低价×_____________+(合同额-最低价)×_____________。
(4)、根据乙方用户付款进度，甲方返还乙方相应的代理费用，返还进度如下：
用户付款进度达到合同额的_____________%以上，开始第一次返还代理费用：
第一次返还：返还代理费总额的_____________%。
用户付款进度达到合同额的_____________%以上，开始第二次返还代理费用：
第二次返还：返还代理费用总额的_____________%。
用户付款进度达到合同额的_____________%以上，开始第三次返还代理费用：
第三次返还：返还至代理费总额的_____________%。
第四次返还代理费用与用户合同余款同步结清。
2、乙方结算代理费用时需提供相应增值税发票。
3、如果是乙方直接与用户签署供货及服务合同的，甲乙双方签定正式内贸合同，届时各项权利义务按合同约定执行。如用户需要甲方出面签字担保时，甲方同意配合。
4、由于投标等造成与用户的成交价格低于最低价(投标价获得甲方书面同意)，甲方按合同中专用产品总价的10%做为乙方利润。
五、费用支出
乙方签定合同时，甲方提供给乙方的产品价格以双方最终协议定价。甲方提供发票，乙方在销售甲方产品时产生的投标、产品展览、商务运作、产品测试等费用成本和支出，甲方不予承担。
甲方签定合同时，甲方提供给乙方的产品价格以双方最终协议定价，乙方提供发票，向甲方提取折扣。乙方在销售甲方产品时产生的投标、产品展览、商务运作、产品测试费用和成本支出，甲方不予承担。
六、甲方提供的支持与服务
为支持乙方拓展所在区域市场，甲方承诺在广告技术住处等方面对乙方提供以下支持：
1、向乙方提供代理证书或其他证明乙方为其代理区域甲方产品唯一独家代理的证明材料。
2、甲方将在其产品广告等公开资料中注明乙方及其代理区域(根据乙方需要)。
3、甲方将根据乙方需要，对产品材质、设计和特点作有关培训，并针对乙方大客户，提供修改设计(ODM)服务。
4、甲方对所有乙方销售的产品因甲方生产质量导致的问题负责退还或免费保修，对因其他原因导致产品损坏提供有偿维修服务。
七、销售业绩
1、考虑到代理区域的广阔性，同时考虑市场周期长及存在较多政策不稳定因素，乙方在临时代理期内的销售业绩优不可预测性，因此甲方有权根据乙方临时代理期内的业绩，决定是否发放正式代理证书。发放代理证书同时，甲方与乙方却定每年乙方应完成的销售业绩。
2、若乙方未完成以上最低要求，甲方有权采取以下措施：
(1)、取消其独家代理权;
(2)、缩小其销售区域;
(3)、终止本合同。
注：乙方在销售业绩不理想的情况下，应书面表述影响业绩因素，以利甲方在适当的时候做出市场决策。
八、销售报告、市场信息
1、乙方应在季度初时向甲方提供未来一个季度的预测，并在每年初提供本年度销售业绩规划。
2、在代理区域内，乙方应保持甲方产品市场占有率的持续提高，包括用户认知(内容不受此限)：
(1)、竞争对手的资料，其产品和价格。
(2)、实际用户和潜在用户对产品的意见。
(3)、用户需求信息。
(4)、未来市场发展机会。
(5)、投标信息(包括报价的和未报价的)。
(6)、市场调研。
(7)、新产品或改进型新产品能否令用户满意。
(8)、有助于甲方对销售区域市场动态进行评估的市场情报。
九、知识产权
1、乙方应在甲方品牌的前提下销售产品。
2、乙方不得使用甲方品牌销售非甲方设计和制造的产品。
3、一旦乙方发觉他方有侵害甲方品牌或其他知识产权等行为的，应立即通知甲方。若甲方有意追究他方的法律责任，乙方应提供有效的帮助。
4、甲方应提供代理产品的设计和生产有关说明。
十、协议期限
1、本协议经双方签字后正式生效，有效期为协议签字之日起12个月。12个月后，乙方凭甲方传真的正式代理证书，获得甲方正式代理权限，直至双方解除代理合作关系。
2、甲方在乙方暂时代理期限内，有权对乙方的业务合同进行考核，如乙方无任何销售行为，甲方有权修改本协议，并单方面解除本协议。
3、如有下列情况发生，任何一方均可立即终止协议：
(1)、另一方违反本协议规定，在得到警告后，30天内未能采取补救方法的;
(2)、另一方即将破产或无力偿还债务;
(3)、另一方具有不诚实或欺诈行为。
4、关于协议终止。
(1)、本协议终止并不能消除各方在协议期内对另一方欠款的支付
(2)、协议期满后，甲方应继续向乙方现有用户提供售后服务，包括产品的非质量问题有偿维修，维修产生的一切费用由客户承担。
(3)、解除代理关系后，除非有必要完成额外的订单，乙方应立即停止代理甲方产品销售、广告或使用任何甲方的知识产权。
甲方： __________________________乙方：__________________________
法人代表：______________________法人代表：______________________
日期：_________年______月_____日日期：_________年______月_____日
篇5：葡萄酒进口买卖协议
编号：_________
签订日期：_________年_________月_________日
卖方：_________
买方：_________
买卖双方经协商同意按下列条款成交：
1.货物名称、规格和质量：_________
2.数量：_________
3.单价及价格条款：_________
4.总价：_________
5.允许溢短装：_________%
6.装运期限：
收到可以转船及分批装运之信用证_________天内装运。
7.付款条件：_________
买方须于_________前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后_________天在中国到期，并必须注明允许分批装运和转船。
买方未在规定的时间内开出信用证，卖方有权发出通知取消本合同，或接受买方对本合同未执行的全部或部份，或对因此遭受的损失提出索赔。
8.包装：_________
9.保险：_________
按发票金额的_________%投保_________险，由_________负责投保。
10.品质/数量异议：_________
如买方提出索赔，凡属品质异议须于货到目的口岸之日起30天内提出，凡属数量异议须于货到目的口岸之日起15天内提出，对所装货物所提任何异议于保险公司、轮船公司、其他有关运输机构或邮递机构所负责者，卖方不负任何责任。
11.不可抗力：
由于发生人力不可抗拒的原因，致使本合约不能履行，部分或全部商品延误交货，卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不能克服的客观情况。
12.仲裁：
因凡本合同引起的或与本合同有关的任何争议，如果协商不能解决，应提交_________仲裁委员会。按照申请仲裁时该会当时施行的仲裁规则进行仲裁。仲裁裁决是终局的，对双方均有约束力。
13.通知：
所有通知用_________文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后_________日内书面通知另一方。
卖方：_________
买方：_________
14.其他：
本合同为中英文两种文本，两种文本具有同等效力。本合同一式_________份。自双方签字之日起生效。
卖方：_________
买方：_________
年月日
篇6：出口销售合同
编?号（No.）?：
签约地点（Signed?at）?：
日?期（Date）?：
卖方（Seller）?：
地址（Address）?：
电话（Tel）?：传真（Fa_________）?：
电子邮箱（E-mail）?：
买方（Buyer）?：
地址（Address）?：
电话（Tel）?：传真（Fa_________）?：
电子邮箱（E-mail）?：
买卖双方经协商同意按下列条款成交：
1.?货物名称、规格和质量?（Name，?Specifi_____ions?and?Quality?of?Commodity）：
2.?数量（Quantity）：
3.?单价及价格条款?（Unit?Price?and?Terms?of?Delivery）?：
（除非另有规定，“FOB”、“CFR”和“?CIF”均应依照国际商会制定的《_________年国际贸易术语解释通则》（INCOTERMS?_________）办理，出口销售合同。）
4.?总价（Total?Amount）：
5.?允许溢短装（More?or?Less）：?___%.
6.?装运期限（Time?of?Shipment）：
收到可以转船及分批装运之信用证___天内装运。
7.?付款条件（Terms?of?Payment）：
买方须于____?前将保兑的、不可撤销的、可转让的、可分割的即期付款信用证开到卖方，该信用证的有效期延至装运期后_____天在中国到期，并必?须注明允许分批装运和转船。
买方未在规定的时间内开出信用证，卖方有权发出通知取消本合同，或接受?买方对本合同未执行的全部或部份，或对因此遭受的损失提出索赔。
8.?包装（Packing）：
9.?_____（Insurance）：
按发票金额的___%投保_____险，由____负责投保。
10.?品质/数量异议?（Quality/Quantity?discrepancy）：
如买方提出索赔，凡属品质异议须于货到目的口岸之日起30天内提出，凡属数量异议须于货到目的口岸之日起15天内提出，对所装货物所提任何异议于_____?公司、轮船公司、其他有关运输机构或邮递机构所负责者，卖方不负任何责任，
11.?由于发生人力不可抗拒的原因，致使本合约不能履行，部分或全部商品延误交货，卖方概不负责。本合同所指的不可抗力系指不可干预、不能避免且不能克服的客观情况。
12.?_____（Arbitration）：
因凡本合同引起的或与本合同有关的任何争议，如果协商不能解决，应提交中国国际经济贸易_____委员会深圳分会。按照申请_____时该会当时施行的_____?规则进行_____。_____裁决是终局的，对双方均有约束力。
13.?通知（Notices）：
所有通知用___文写成，并按照如下地址用传真/电子邮件/快件送达给各方。如果地址有变更，一方应在变更后___日内书面通知另一方。
14.?本合同为中英文两种文本，两种文本具有同等效力。本合同一式?_____?份。自双方签字（盖章）之日起生效。
The?Seller：The?Buyer：
卖方签字：买方签字：
_______年___月___日?_______年___月___日
篇7：技术出口合同范本_合同范本
Contract for Equipment Sales and Technology Licensing
Contract No. ____________________
This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at _________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at _________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).
Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:
Article 1 Definitions
1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.
1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.
1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.
1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.
1.5 “Destination Airport” refers to _____________Airport.
1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.
1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.
1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.
1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.
1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.
1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.
1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.
1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.
1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.
1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.
1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.
1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.
1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.
1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.
Article 2 Scope of the Contract
2.1 The Seller’s Obligation
2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.
2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.
2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.
2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.
2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.
2.2 The Buyer’s Obligation
2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.
2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.
2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.
2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.
2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.
2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.
Article 3 Grant of License
3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.
3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.
3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.
3.4 Territory
3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.
3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.
Article 4 Price
4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.
4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).
The breakdown price is as follows:
The price for Equipment is __________(say _______________________ only).
Fee for design is __________(say _______________________ only).
Fee for Technical Documentations is __________(say _______________________ only).
License fee is __________________(Say: _________________ only)
4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).
4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.
4.2.3 The above price is fixed and firm.
4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.
4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.
Article 5 Payment
5.1 Down Payment
Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.
5.2 [Option One: Payment by Sight L/C]
The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).
5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) Bill of Lading in one (1) original and ___ ( ) copies;
(b) Commercial Invoice in one (1) original and ___ ( ) copies;
(c) Packing list in one (1) original and ___ ( ) copies;
(d) Certificate of Origin in one (1) original and ___ ( ) copies;
(e) Insurance Policy in one (1) original and ___ ( ) copies;
5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;
(b)One ( 1 ) copy of commercial invoice.
5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:
a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;
b) One (1) copy of Commercial Invoice.
5.2 [Option Two: Payment under a L/G]
The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.
5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.
Article 6 Delivery of Equipment and Technical Documentation
6.1 The Delivery of the Equipment
6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.
6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.
Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.
6.1.3 The port of shipment is ____, while the port of destination is ____.
6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.
6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.
6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:
(a) Contract number
(b) Name of the vessel and loading port
(c) Name of the Equipment shipped
(d) Number and date of Bill of Lading
(e) Total volume
(f) Total gross and net weight
(g) Total number of packages/cases
6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:
(a) Bill of Lading
(b) Commercial Invoice
(c) Packing List
(d) Certificate of Origin
(e) Insurance Policy.
6.2 The Late Delivery of the Equipment
6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:
(a) From the first week to the fourth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per
week
(b) From the fifth week to the eighth week, the liquidated damages shall be
____ ( ) percent of the value of the delayed portion of the Equipment per week
(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of
the value of the delayed portion of the Equipment per week
6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.
6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.
6.3 The Delivery of the Technical Documentation
6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.
6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.
6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.
6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.
Article 7 Packing and Marking
7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.
7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:
(a) Destination
(b) Consignee
(c) Contract number
(d) Shipping mark
(e) Gross/net weight (kg)
(f) Case/ bale number
(g) Dimensions: L x W x H (cm)
7.3 Each package shall contain one (1) copy of packing list.
7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.
7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.
(a) Destination
(b) Consignee
(c) Contract number
(d) Gross/net weight (kg)
(e) Item number
(f) Dimensions: L x W x H (cm)
Article 8 Technical Service and Technical Training
8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.
8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.
8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.
8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.
Article 9 Standards and Inspection
9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.
9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.
9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.
The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.
9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.
In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.
9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.
9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.
If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.
Article 10 Design and Design Liaison
10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.
10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.
10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.
Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance
11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.
11.2 Chief Representatives
11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.
11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.
11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.
11.3 Erection and Test Run
11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.
11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.
11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.
11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.
11.4 Commissioning and Performance Test
11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.
If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.
11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.
11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.
11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.
11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.
11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.
11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.
11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.
11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.
The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.
11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.
11.5 Acceptance
11.5.1 Acceptance shall occur in respect of the Equipment when :
(a) Performance Test has been successfully completed as per the Article 11.4.6.; or
(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or
(c) The Seller has paid the liquidated damages as per Article 11.4.9; or
(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or
(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.
11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.
11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.
11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.
11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.
Article 12 Guarantee and Warranty
12.1 The Seller guarantees that:
(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;
(b) The Technical Documentation shall be complete, clear and correct.
12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.
12.3 Defect of the Equipment
12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.
The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.
12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.
12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.
12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.
12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.
12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:
(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or
(b) Alteration, modification or repair without the Seller’s prior written consent; or
(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or
(d) Normal wear and tear.
12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.
12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.
12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.
12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.
12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.
Article 13 Intellectual Property Right
13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.
13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.
13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.
13.4 Registration of the Contract and Maintenance of Patent
13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.
13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.
13.5 Improvement and Grant-back
13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.
13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.
13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.
Article 14 Confidentiality
14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.
14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.
14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.
14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.
14.5 This Article 14 shall survive the expiration or termination of the Contract.
14.6 The confidential obligation shall not apply to the information which:
A. now or hereafter enters the public domain; or
B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or
C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.
Article 15 Taxes and Duties
15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.
15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.
15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.
15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.
Article 16 Force Majeure
16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.
16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.
16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.
Article 17 Applicable Law and Settlement of Disputes
17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.
17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.
17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.
17.4 The arbitral award shall be final and binding upon both parties.
17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.
Article 18 Effectiveness, Term and Termination of the Contract
(a) The Seller and the Buyer sign the Contract;
(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);
(c) The Seller receives the Down Payment;
(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.
18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.
18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.
18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.
(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.
(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.
(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.
18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party
A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
B. fails to perform its confidentiality obligation under the Contract; or
C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or
D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.
18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if
A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or
B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or
C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.
18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,
The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.
All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.
All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.
In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.
The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.
E. Termination of the Contract shall not release either party from its confidential obligations under the Contract
Article 19 Miscellaneous
19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).
19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.
19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.
If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.
19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.
19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.
The Buyer:
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
The Seller :
Address:
Post Code:
Fax: __________________________
Tel.: __________________________
Email:__________________________
Attention: ______________________
IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.
The Buyer:
The Seller:
By:______________________[Signature]
Name: [printed name]
By:_______________________ [Signature]
Name: [printed name]
Title:
Title:
Appendices
Appendix 1 Specifications and Guarantee Indices (Omitted)
篇8：外贸采购合同
需方： (以下简称需方)
供方： (以下简称供方)
供、需双方本着平等、互惠互利原则，经协商一致，就需方向供方采购、供方向需方供应附件一中所列产品签订本合同。
一、供货方式：
1.由需方以《物料订购单》方式向供方下达采购订单，供方须按照订单要求提供产品。
2.供方在收到《物料订购单》后应回传确认函，如有任何问题必须在一个工作日(8小时)内书面通知需方，否则视为默认。
3.需方有权根据生产计划的变更以及供方产品的供货质量、采购订单的执行情况、售后服务质量等条件对供方的供货品质及数量进行及时调整，供方有义务积极配合。
4.为保证产品数量的准确性，供方须免费提供1-3%的易损耗件和需方客户所必须的随柜修补件。
二、 产品的质量要求：
1.供方应按需方认可的产品供货，未经需方事先书面同意，不得对产品本身和生产场地有任何改变。
2.供方需严格按照经需方认可的质量和技术规格要求生产和供应产品，如有任何改变，需方负责知会供方更新有关图纸或菲林等，供方积极跟进相关的变化。
3.供方应保证所生产或供应的产品均符合有关环保法规要求及国家标准、行业标准。
三、品质保证：
1.供方应保证所使用的原材料符合需方要求，对未曾使用过的原辅材料的变更，必须提前书面报需方确认。
2.供方应建立有效的质量保证体系以满足需方要求，需方有权随时对此进行检查考核。
3.供方供货前应严格按要求自检，其检测项目不得少于需方标准和图纸所规定的进货检测项目，并有书面记录。
4.对需方提出的质量问题和要求整改意见，供方必须及时解决和整改，若在规定期限内未得到解决和整改，需方有权停止供方供货。
四、包装要求：
供方须按需方要求定量包装，并在外包装上标识制造批号、物料名称、材质、型号、规格、颜色、数量等，包装物应适应*车装卸、长途运输，符合防潮、防震、防尘要求，因包装、运输不当引起的锈蚀、损伤等由供方负责。
五、交货地点及运输、装卸费用承担：
1.交货地点：需方工厂仓库或指定地点 。
2.运输、装卸费用：由供方承担。
六、价格及付款方式：
1.供、需双方均应不断改进，通过提高质量与效率来降低成本及价格，并让利给最终客户，双方确认努力保持这种降低成本的趋势，每年至少检讨一次价格。
2.供方报价中含有模具费的产品,在需方购满规定数量后,供方应自动下调采购价格。
3.供、需双方同意在本合同明确的交货条件及付款条件下，共同遵守经买方批准的价格。
4.付款条件：月结 天，结算日期以供方产品入库后，需方在每月 日前收到供方提供的正本发票开始计算(收到发票日期以签收单为准)。
七、交货及验收：
1.供方须按需方要求定量包装，并按订单要求的交货时间将货物送至指定地点，并附上《送货清单》及供方的出货自检报告或证明(必要时需提供第三方检测的材料性能测试报告)供需方备查。《送货清单》须列明需方订购单号及物料信息(制造批号、物料名称、材质、规格、颜色、数量等)。
2.需方依据双方约定的品质标准、技术要求和检测方案，并参照原封样件的要求进行检验和判定是否合格。
3需方检测不合格应及时通知供方，供方如对检测结果有异议，应及时向需方提出书面申请意见复检，否则视同接受。
4.虽已检验合格入库，但在需方装配和使用过程中发现的不合格品，供方仍应承担质量责任，并及时配合需方采取有效措施予以补救，以满足需方正常生产的需要。
5.需方对供方产品所行使的检验，并不能免除供方对产品质量的责任。
八、供方违约责任：
1.供方不能交货的，应向甲方偿付不能交货部分货款的 %(标准件、通用件产品的幅度为3-5%，非标准件、专用件的幅度为10%-30%)的违约金。并赔偿由此而给需方造成的损失费用。
2.供方交付的产品品种、型号、规格、颜色等质量不符合合同规定的，如果需方同意利用，应当按质论价;如果需方不能利用的，应根据产品的具体情况，由供方负责挑选、返修或退换，所发生的费用由供方负责;如使用紧急需挑选、返修时，则供方应立即组织挑选、返修或需方直接组织挑选、返修，因此发生的费用由供方承担(人工费：10元/小时•人);供方不能返修或调换的，按不能交货处理。
3.供方因产品包装不符合规定，必须返修或重新包装的，供方应负责返修或重新包装，并承担支付的费用，需方不要求返修或重新包装而要求赔偿损失的，供方应当偿付需方该不合格包装物低于合格包装物的价值部分，因包装不符合规定造成货物损坏或丢失的，供方应当负责赔偿。
4.供方逾期交货的，供方必须事先与需方联系，说明原因和解决方案，并获得需方同意后方可实施，并向需方支付逾期交货的违约金，违约金按逾期交货部分货款的同期人民银行贷款利率计算，供方还须赔偿因逾期供货而给需方造成损失的费用。
5.供方提前交货的产品、多交的产品和品种、型号、规格、颜色等质量不符合规定的产品，甲方在代保管期内实际支付的保管、保养等费用以及非因需方保管不善而发生的损失，应当由供方承担;供方提前交货，需方接货后，仍可按合同规定的交货时间付款，合同规定自提的，需方可拒绝提前提货。
6.因供方产品不合格进行挑选、返修或退换，而造成需方生产停工待料时，需方有权视情况严重程度进行罚款，每延误一个工作日处以至少壹仟元罚款，延误需方出货期而需空运或遭到需方客户延误交期索赔的费用由供方承担。
7.因供方提供需方的产品质量问题导致需方客户投诉，造成需方损失的，需方对其有形损失(费用、索赔)及无形损失(公司信誉)进行核算后，以书面通知供方，经供方对质量问题确认后从供方货款中扣除，如供方对质量问题有异议，可提交合同签订地所在质量技术监督局进行质量鉴定。
九、需方违约责任：
需方如不能按合同规定付款期支付供方货款，须事先与供方联系，说明原因及解决方案，获得供方同意后，并向供方支付逾期付款违约金，违约金按逾期付款金额同期人民银行贷款利率计算。
十、保密条款：
1.在未取得双方事先许可的情况下，不得将本协议内容向第三方公开或泄露。
2.供方从需方得到的图纸、规格书、技术文件、模具和样品等，未经需方同意，供方不得向第三者转让、公开、泄露或被使用。
3.供方绝不允许把需方提供的图纸、技术文件和模具转让给第三方加工、制作产品出售，其所造成的后果，均由供方负全部责任。
4.本规定在本合同终止后继续有效。
十一、合同解除：
1.供方有以下任何事项时，需方不需要任何通知，可马上解除本合同：
A.违反本合同条款约定的行为或事实时;
B.在供应期间内，不能满足需方数量及品质要求无能力供应时;
C.被政府机关停止或取消营业资格给予处分时。
2.协议一旦解除，供方接到需方通知后，应立即归还需方所提供的模具、图纸、技术文件等，并偿还一切债务。
3.因违反合同条款造成需方损失的，需方有权要求供方赔偿损失。
十二、合同纠纷解决：
供、需双方之间产生有关本合同的一切纠纷，双方应通过友好协商解决，如果协商不能解决，双方当事人可向合同签订地人民法院提出诉讼。
十三、合同期限：
本合同经双方签章后，即刻生效。本合同一式两份，供、需双方各执一份。
合同期限为： 年 月 日至 年 月 日鉴于供、需双方合作的长期性和稳定性，在本合同期满前三个月内，如合同一方提出需延长合同的有效期，经另一方确认后可延长合同期限。
十四、合同所有附件是本合同不可分割的组成部分，具有同等法律效力。
本合同未尽事宜，应由双方共同协商，作为补充合同，补充合同与本合同具有同等效力。
甲方(公章)：_________ 乙方(公章)：_________
法定代表人(签字)：_________ 法定代表人(签字)：_________
_________年____月____日 _________年____月____日
篇9：进口货物委托代理合同
甲方：乙方：
地址：地址：
法定代表人：电话：法定代表人：电话：
丙方：
地址：
授权代表：电话：
鉴于：
1、乙丙双方经友好协商，同意由乙方向丙方购买本协议及本协议所涉及合同项下的货物;
2、乙方委托甲方向丙方进口上述货物，但出于某些技术上的原因，甲、乙双方于______年____月____日就该批货物签订了号《买卖合同》而非代理进口合同;
3、乙方授权甲方就上述货物以甲方名义与丙方于______年____月____日签订了号《进口合同》;
4、甲乙丙三方均知悉并同意上述情况及做法：
甲乙丙三方就上述销售合同及进口合同中的某些问题，经友好协商，达成一致，兹签订本协议书。
甲、乙、丙三方同意：
1、如乙方未按照销售合同的规定将全部货款付至甲方，甲方无义务按进口合同的规定向丙方支付任何货款，且免除任何有关延迟付款的违约责任，丙方无权依进口合同向甲方追索任何货款。
2、甲方对有关货物的质量不承担任何责任。如乙方对货物质量有任何异议，应自行与丙方协商处理，而无权依销售合同向甲方追究任何违约责任;如需退换货，乙方可委托甲方办理，手续费另计。
3、丙方保证交付所给甲方的货物在产地，规品、数量等方面与进口合同的规定严格一致;如有不符，丙方应承担所有法律责任并赔偿甲方因此而遭受的海关处罚。
4、如销售合同及进口合同的规定与本协议不符，以本协议的规定为准。
甲方：
授权人签字：
盖章：
乙方：
授权人签字：
盖章：
丙方：
授权人签字：
盖章：
______年____月____日
篇10：胶合板进口合同争议仲裁案
申请人向被申请人购买4,000立方米胶合板。申请人付款后，被申请人未交货。由于被申请人仅退还部分货款，申请人提请仲裁。仲裁庭认为：被申请人未交货，构成违约，申请人要求退还货款的请求应予支持。被申请人还应当赔偿申请人的预期利润损失，按交货地的市场价与合同的差价来计算。申请人在明知被申请人不能交货的情况下，仍然与下家签订转售合同，由于申请人违反了减轻损失的义务，申请人向下家支付的违约金不应由被申请人赔偿。
中国国际经济贸易仲裁委员会深圳分会(下称深圳分会)根据申请人与被申请人签订的"号货物进口合同"中的仲裁条款，以及申请人提交的仲裁申请书，依据中华人民共和国仲裁法和中国国际经济贸易仲裁委员会仲裁规则(1998年5月10日施行文本，下称仲裁规则)的规定，于1998年11月25日受理了双方当事人之间关于上述合同的争议案。
申请人指定了仲裁员。因被申请人未在规定的20天内指定或委托指定而由中国国际经济贸易仲裁委员会主任指定了仲裁员。因双方未在规定的期限内共同指定而由中国国际经济贸易仲裁委员会主任指定了首席仲裁员。以上三名仲裁员于1999年3月1日组成仲裁庭审理本案。
1999年4月21日，仲裁庭在深圳开庭审理本案。申请人的代理人出席了庭审。被申请人没有出席。按照仲裁规则的规定，仲裁庭进行了缺席审理。
庭后，申请人补充了材料。
深圳分会秘书处依仲裁规则的规定，将申请人提交的所有材料、有关仲裁程序的一切文书、通知、材料均邮寄给被申请人。被申请人收到后没有作出任何回应。
1999年5月28日，仲裁庭对本案作出书面裁决，现将本案案情、仲裁庭的意见及裁决分述如下。
一、案情
1997年1月28日，申请人与被申请人在签订"号货物进口合同"，合同标的为马来西亚胶合板4,000立方米，合同总金额1,980,000美元，装运港为马来西亚港，目的港为汕头港，装运期在1997年3月1日前。合同同时还约定：1.任何因本合同而发生或与本合同有关的争议，应提交中国国际经济贸易仲裁委员会，按该会的仲裁规则进行仲裁。仲裁地点在中国深圳。仲裁裁决是终局的，对双方均有约束力。
2.本合同之签订地，或发生争议时货物所在地在中华人民共和国境内或被诉人为中国法人的适用中华人民共和国法律，除此规定外，适用《联合国国际货物销售合同公约》。
在合同的履行过程中，双方发生争议。1998年10月29日，申请人依据合同中的仲裁条款，向深圳分会提起仲裁，请求：1.要求被申请人退还因未按约定提供货物而占用申请人已付的货款526,961.15美元及该笔资金的银行信用证垫款利息106,314.41美元，本息合计633,275.56美元;并要求被申请人赔偿未提供货物而给申请人造成不同的直接利益损失98,501.58美元。上述各项总计731,777.14美元。
2.要求被申请人支付本次仲裁的全部仲裁费。
申请人称：
1997年3月24日，被申请人将商业发票、装箱单、提货单等1套寄至申请人，申请人根据中国工商银行支行的进口付款通知书于4月2日予以承兑，(申请人仲裁申请书中原为：申请人遂按对方提单金额于4月2日开出不可撤销跟单信用证。后在庭后提交"仲裁申请书内容更正"中予以更正--仲裁庭注)总金额1,980,405.50美元。因申请人未收到该合同项下的货物，对方于1997年4月15日退还申请人1,453,444.35美元，却将剩余货款526,961.15美元扣压至今，不予返还。此外，申请人还从1997年4月10日起，一直为该笔款项支付银行信用证垫款利息至今。
申请人基于对被申请人的信任，将全部货款如数支付。但由于申请人一直未收到对方提供的合同项下的货物，致使申请人未能实现订立合同预期的利益。事实上，申请人于履行了申请人支付义务后，即与国内需方订立了以该批货物为标的购销合同，该合同约定每张胶合板的销售价为37元人民币，而申请人该批进口胶合板的成本价为每张36.19元人民币。依此计算，申请人损失因合同可产生的合理利益399,168元人民币，以当时中国银行外汇牌价折算为48,501.58美元。不但如此，申请人还因无法履行该购销合同之供货义务而向需方支付了50,000美元的违约金。预期利益与违约金之和为98,501.58美元。
被申请人没有进行答辩。
二、仲裁庭的意见
(一)关于法律适用
本案争议合同的签订地点在中国。按照合同规定，合同签订地在中华人民共和国境内的，适用中华人民共和国法律。因此，本案应适用中华人民共和国法律。
(二)关于剩余货款526,961.15美元及其利息106,314.41美元经查，1997年1月28日，申请人与被申请人签订了本案争议合同。1997年3月7日，经申请人申请，中国工商银行开出以被申请人为受益人，总金额为1,980,000.00美元的不可撤销信用证，编号为LC。1997年3月26日，被申请人开出一张商业发票，编号为DF1-63012，金额为为1,980,405.50美元。1997年4月1日，中国工商银行支行向申请人发出"进口付款通知书"，并附上有关单据(包括提单、装箱单、品质证书、重量证书等)，要求申请人审核。1997年4月2日，申请人根据上述付款通知书，对编号为LC信用证下的1,980,405.50美元予以承兑。但此后申请人未得到被申请人的提货通知。申请人于1997年4月初与被申请人通过电话交涉，在得知被申请人无法交货的情况下，要求被申请人退款并由申请人在香港的客户××集团有限公司(下称××公司)代收。1997年4月17日，被申请人根据申请人的指示汇款1,453,444.35美元予××公司。
仲裁庭认为，被申请人没有依"号货物进口合同"的约定，向申请人履行交货义务，已构成违约，应将上述申请人已支付的金额1,980,405.50美元全部返还申请人。证据表明，被申请人已经向申请人返还1,453,444.35美元。被申请人在其给许先生的函中承认LC信用证下的尚欠款为526,961.15美元，而认为银行费用、180天银行利息、政府税务应由申请人承担而不返还，但是并没有说明理由。仲裁庭认为，银行费用、180天银行利息、政府税务应由被申请人自己承担。因此，除被申请人已经返还的1,453,444.35美元外，剩余款526,961.15美元也应由被申请人返还申请人。
篇11：出口代理合同范本_合同范本
出口代理方：________________________（以下简称甲方）
委托方：____________________________（以下简称乙方）
为了发挥各自优势，共同做好出口创汇工作，本着“诚实、信用”的原则，甲、乙双方经过友好协商达成协议如下：
一、合作形式
1.乙方以其拥有的出口客户和渠道与甲方进行出口业务合作，乙方承诺其拥有的出口客户和渠道没有侵犯第三者的权益，进行的出口业务内容合法，无欺诈等行为，否则乙方承担最终的全部法律责任；
2.合作期间，乙方作为甲方的业务办事处或业务部对外从事出口业务并承担规定的义务；
3.合作期间，乙方以甲方名义从事出口业务必须遵循本协议的有关规定；
4.合作期间，甲方应对乙方的客户资料进行必要的保密，不得利用乙方的客户资源开展与乙方业务相关的业务；
5.甲方负责报关、报验、制单结汇等工作；
二、出口指标和相关考核
1.期限：_______年_______月至_______年_______月。
2.乙方承诺完成年出口任务_______万美元。甲方按出口金额每美元收取代理费_______元人民币；或按等值的代理费进行买断，买断比例为1美元：______人民币，采取买断式，乙方必须提供足额的增值税发票和专用缴款书。
三、基本规定
（一）甲方的权利和义务
1.按照甲方的标准合同格式负责对外出口合同的签订；
2.按照甲方标准合同格式与有关的供货单位签订代理出口合同；
3.负责报关、报验、投保、结汇以及有关文件的申领（应由乙方提供的文件除外）等工作,要求及时、准确；
4.按照代理出口合同约定的付款时间及时与供货单位结算货款；
5.按照本协议的有关规定及时向乙方分配其应得的利润。
（二）乙方的权利和义务
1.按照本协议业务操作的有关规定负责对外的磋商；
2.按照出口合同的有关规定负责出口货物的质量监督和把关工作，督促有关供货单位按时、按质交货并对有关供货方的质量承担担保连带责任；
3.及时向甲方提供与出口业务有关的文件或单据；
4.负责出口货物的安全收汇并对延迟收汇和不能收汇以及不能按时收汇核销承担全部的责任；
5.乙方应负责出口收汇核销单和出口退税文件的按时收回和交接工作。
6.乙方应负责逾期账款的催收工作并承担国外客户的理赔工作。
7.按照本协议的有关规定及时从甲方得到应分配的利润。
（三）业务操作的具体规定
1.由乙方具体负责出口业务的磋商和成交工作，对外签订出口合同须以甲方名义并使用甲方的标准出口合同格式。
2.出口合同的卖方和/或信用证的受益人是：________________________股份有限公司
注:在t/t汇款的情况下,应要求客户在汇款单上注明出口合同号码。
3.及时与有关的供货单位签订有关合同,合同中应对质量条款和具体的技术指标做重点规定特别是必须明确应在收到国外的货款后才能支付供货方货款或类似的条款；上述合同签订后，甲方应给乙方一份留存；
4.合作期间，甲方先行预付部分资金或垫付费用及预先垫付的退税等应按实收取财务利息, 预先垫付的退税利息按照财务利息(5.75‰)/月息× _______个月收取；
共2页，当前第1页12
篇12：外贸合同范本英文_合同范本
日期： 合同号码：
date: contract no.:
买 方： (the buyers) 卖方： (the sellers)
兹经买卖双方同意按照以下条款由买方购进，卖方售出以下商品：
this contract is made by and between the buyers and the sellers; whereby the buyers agree to buy and the sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter:
(1) 商品名称:
name of commodity：
(2) 数 量：
quantity:
(3) 单 价：
unit price:
(4) 总 值：
total value:
(5) 包 装：
packing:
(6) 生产国别：
country of origin :
(7) 支付条款：
terms of payment:
(8) 保 险：
insurance:
(9) 装运期限：
time of shipment:
(10) 起 运 港：
port of lading:
(11) 目 的 港：
port of destination:
(12)索赔：在货到目的口岸45天内如发现货物品质，规格和数量与合同不附，除属保险公司或船方
责任外，买方有权凭中国商检出具的检验证书或有关文件向卖方索赔换货或赔款。
claims:
within 45 days after the arrival of the goods at the destination, should the quality, specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable, the buyers shall, have the right on the strength of the inspection certificate issued by the c.c.i.c and the relative documents to claim for compensation to the sellers
(13)不可抗力：由于人力不可抗力的原由发生在制造，装载或运输的过程中导致卖方延期交货或不
能交货者，卖方可免除责任,在不可抗力发生后，卖方须立即电告买方及在14天内以
空邮方式向买方提供事故发生的证明文件，在上述情况下，卖方仍须负责采取措施尽
快发货。
force majeure :
the sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to force majeure, which might occur during the process of manufacturing or in the course of loading or transit. the sellers shall advise the buyers immediately of the occurrence mentioned above the within fourteen days there after . the sellers shall send by airmail to the buyers for their acceptancea certificate of the accident. under such circumstances the sellers, however, are still under the obligation to take all necessary measures to hasten the deliveryof the goods.
(14）仲裁：凡有关执行合同所发生的一切争议应通过友好协商解决，如协商不能解决，则将分歧提
交中国国际贸易促进委员会按有关仲裁程序进行仲裁，仲裁将是终局的，双方均受其约
束，仲裁费用由败诉方承担。
arbitration :
all disputes in connection with the execution of this contract shall be settled friendly through negotiation. in case no settlement can be reached, the case then may be submitted for arbitration to the arbitration commission of the china council for the promotion of international trade in accordance with the provisional rules of procedure promulgated by the said arbitration commission . the arbitration committee shall be final and binding upon both parties. and the arbitration fee shall be borne by the losing parties.
买方： 卖方:
--------------------- ---------------------
（授权签字） （授权签字）
篇13：外贸公司融资担保协议
为有利于双方发展，充分利用双方对外融资的有利因素，加强企业间经济合作，提高经济效益和社会效益，甲、乙双方就融资担保问题经过充分酝酿，共同达成如下协议：
一、甲、乙双方本着平等互利、真诚合作、共同发展的原则，在融资领域内进行友好合作。
二、甲、乙双方共同确认：双方承担总额度为伍仟万元的贷款责任担保，并同意按照《中华人民共和国民法典》履行各自责任。
三、在乙方需要担保时，甲方为乙方提供的担保额度总共为万元，不管是乙方中的一家公司还是二家公司;在甲方需要担保时，甲方可以选择乙方中的一家公司，为甲方提供相同额度的贷款担保。
四、甲、乙双方在履行互为担保时，最长担保期限不超过三年，贷款必须专款专用，担保方有权对被担保方的贷款使用情况进行监督，期满还清贷款本息时，被担保方应主动向担保方提供还贷凭证，以便对方及时了解。
五、任何一方为对方担保时，应如实提供各自财务报表、营业执照、信用证明复印件以及有关企业概况等资料。
六、担保方的继受人将受本协议的约束，并继续承担担保责任。未得到对方事先书面同意，担保方不会转让其担保义务。
七、担保方代被担保方清偿债务后，有权向被担保方追偿。
八、在本合同有效期内，甲、乙任何一方都不得擅自变更或解除本合同，确需变更本合同条款时，应经对方协商同意，达成书面补充协议。
九、违约责任
甲、乙双方都应遵守本协议的约定，任何一方违约，违约方应向守约方支付违约金________万元，并赔偿守约方的一切经济损失。
十、争议的解决方式
在履行本合同中发生的争议，由甲、乙双方协商或通过调解解决。协商或调解不成，任何一方都有权向原告所在地的人民法院起诉。
十一、协议未尽事宜，双方协商解决。
十二、本协议自签订之日起生效。
甲方：乙方：
年月日
十三、本协议一式二份，双方各执一份，以兹共同遵守。
甲方：
乙方：
年月日
篇14：货物进口合同范本_合同范本
货物进口合同(范本)
甲方：_____公司(以下简称供方)，由_____代表。
乙方：_____公司(以下简称购方)，由_____代表。
目录
第一条 合同标的
第二条 技术资料
第三条 供货条件--包装和标记
第四条 设备质量
第五条 合同价格和支付条件
第六条 保证
第七条 不可抗力
第八条 仲裁
第九条 通知
第十条 语言
第十一条 其他条件
附件1 设备技术说明书
甲方___(供方)与乙方____(购方)达成如下协议：
第一条 合同标的
供方同意出售，购方同意购买____。(详见本合同附件1，该附件为本合同不可分割的一部分)。
第二条 技术资料供方应向购方提供设备使用及维修技术资料一份，购方负有对该技术资料保密之义务。
第三条 供货条件--包装和标记供方应在设备全额信用证开立之后的__个月内用密封集装箱或其他包皮包装从____发运设备。供方有权从任何对其方便的港口发运设备。供方应把设备运至商定的独联体东海岸___港。自设备从船舷运抵独联体远东港口时起灭失和(或)损坏的风险由供方转移到购方。供方承担设备运输的一切费用及运抵港口前的保险费。设备从独联体港口继续运到安装地的一切费用由购方承担。发货前__天内供方应向购方通知发运情况，明确交通工具的种类和名称、计划发运日期及其他有关信息。购方应支付履行海关手续的所有费用和一切与设备运入独联体境内有关的开支。设备和技术资料用密封集装箱或其他包皮装运并附具包装清单，标记使用英语刷写。
发货单证包：
(1)发货帐单(三份)
(2)海运提单
(3)装箱单
(4)保险单
第四条 设备质量
按本合同所供设备的质量应符合生产厂家的技术条件。如生产厂家有保证书，应用保证书加以确认。
第五条 合同价格和支付条件所供设备的总额为___美元(cif价)。购方应在合同签订后的__天内开立以供方为受益人的不可撤销的保兑信用证。该信用证在开立时起的__天内有效。开证行应为独联体外经银行或日本、南韩、西欧、美国、加拿大的某家银行。一切与在开证行开立信用证有关的费用由购方承担，而一切与议付行收取信用证有关的费用由供方承担。支付在向议付行提交下列单据后进行：
(1)发货帐单(3份)
(2)海运提单
(3)装箱单
(4)保险单
第六条 保证
供方保证所供设备在投入使用日起的__个月内，但不超过发货日起的__月内正常工作。
第七条 不可抗力
在发生不可抗力情况致使合同一方不能全部或部分履行本合同的义务时，按此种不可抗力情况存在的时间推迟履行合同义务。不可抗力情况是指双方不能预见或预测的由于非常事件而出现的情况，即：影响履行所承担义务的火灾、风暴、地震和其他自然现象，以及战争、任何性质的军事行动，各国政府的封锁与制裁等。因不可抗力情况而不能履行义务的一方，应在不可抗力情况发生和停止的20天内书面通知另一方关于其发生和停止的情况。收信人所在国邮局在收到通知函日加盖的日期作为得悉该信息的日期。协约双方国商会出具的证明书将成为证明上述情况发生及延续时间的必要证据。如这些情况延续3个多月，每一方都有权拒绝继续履行本合同义务，同时任何一方都无权要求对方赔偿可能发生的损失。
第八条 仲裁
所有可能由本合同而产生的纠纷或分歧均应由合同双方友好解决。如果无法解决纠纷，则该纠纷应提交莫斯科市外贸仲裁委员会按其业务规章审理(提交一般法院审理者除外)，该委员会的决定对于双方均为终审，必须执行。
第九条 通知
一切通知等双方均应按本合同条件以书面形式进行。
第十条 语言
本合同用俄语书就。供方提供英文的全部技术资料和供货单证。
第十一条 其他条件
自本合同签署之日起，所有在此以前的有关谈判和往来信函均告失效。对本合同的任何修改和补充只有在以书面形式形成并经双方有关全权代表签字后方能生效。经双方确认的往来信函、传真、电子邮件等，将作为本合同的组成部分，并有合同的效力。任何一方都无权在未征得对方书面同意之前将自己对合同的权利和义务转让给第三者。本合同于____年____在俄罗斯___签署。一式两份，两份具有同等效力。
供方：_____
购方：_____
篇15：2024外贸业务员个人工作计划_业务员工作计划_网
每一个业务员的工作都是不简单的，工作计划就是为了降低难度。下面是小编整理的关于外贸业务员的个人工作计划，欢迎阅读。
个人的工作计划(一)
很荣幸能有机会加入XX集团。虽入职时间较短，仍深深地感受到我司井然有序的管理秩序及我们部门充满朝气的团队氛围。在这个岗位上，我明*临的机遇和挑战都是巨大的，外贸业务知识及经验的积累都需要自身不断的努力和学习。
在新的一年里，我对自己的工作情况计划如下：
首先，学习外贸知识、产品知识。对一名刚从英语系毕业一年半的外贸新手来说，我的外贸知识还有待于加强，需要在往后的工作中进一步积累。此外，刚刚接触这个行业，对产品的认知我几乎是一片空白。因此，学习是我新年计划中的首要环节和重要任务。我会以一种积极的态度虚心向领导及各位同事请教。在我的个人观念里，态度决定成败，希望自己的努力会得到大家的肯定。
其次，学习缮制单据。在熟悉整套外贸流程理论知识之余，锻炼自己的实际操作能力。因为此前一年多的工作经验都只是局限于业务方面，重点在与客户的沟通上。单据的制作以及出口流程中跟银行、商检、海关、贸促会等相关部门的接触，都是我面临的新的工作。由此，我也体会到自己以前掌握的工作环节并不全面、完整。现在能从最基本的出口单证做起，对我来说是一个不可多得的学习机会。
第三，如有机会接触公司业务，我希望能尽快熟悉自己跟的每一个客户，总结并分析他们的新特点，以一颗热忱的心为客户服务，为公司创利!
第四，积极开拓新业务，充分利用网络资源为公司寻找目标客户。及时更新我司在阿里巴巴等相关网站上发布的供求信息，并持之以恒地跟踪，相信长久的付出总会有一定的成效。
第五，协助领导及同事做好两届展会及其它国外展会的前期准备工作。在展会结束后，协助参展人员做好后续的客户跟踪服务，以此巩固展会成果。
另有几条小小的建议：
一、因经理在业务洽谈方面会经常与客户进行电话沟通。为此提议是否可在电脑上安装Skype软件，申请一个Skype帐号，并向客户积极推荐这一网上及时沟通工具。其通话质量与手机差不多，还可节省双方的国际长途电话费用。
二、部门内部多开展一些活动，在活动中增强整个团队的凝聚力。
三、对新人多开设外贸知识及业务知识的内部培训课程。
最后，再次感谢领导对我的信任。相信在这个优秀的团队中，我将受益不少。同时，我也期待自身的不断完善能为公司的发展贡献一份力量!
个人的工作计划(二)
新的一年，制定良好且有效的工作计划对于今后的发展起着很重要的作用，既不浪费时光和精力，同时也能改善自身的一些不足，提高自我对客户的沟通潜力，促使工作开展顺利。
增强职责感，增强服务意识，增强团队意识。用心主动把工作做到点上，落到实处。明确自我的工作职责，遇到问题要及时分析问题，解决问题，服从上级的安排。
在此我订立了工作计划，以便自我在新的一年里有更大的进步和成绩。
一.产品市场分析
1。广告光源一向是外贸的主推方向，灯帘、灯条、灯管、模组、超薄灯箱都比较有优势，很多的产品的价格已经比之前的低了很多。今后还需要多做一些产品优势的比较文档，产品案例分许与应用，让客户更加了解我们的产品。
2。商业照明灯具由于价格比较高，很多国外客户基本不能理解。但还是需要更多的了解产品，多做优势比较文档，寻找优质高端客户。
3。高端产品就需要寻找优质客户。目标客户定位在美国、迪拜、日本等国家。用心运用不一样的搜索引擎寻找客户，不能只依靠阿里巴巴，。
二.对日后工作的安排
1。在开发客户这方面，可适当的改变策略，增加在免费平台上和商业网站上发布供应信息;参加一些展会;尝试用国外的本地搜索引擎。以寻找目标市场的商业网站、行业协会网站、商会网站及产品专业网站为方向，了解并联系目标市场知名度高销售网络庞大的进口商。
2。在和客户沟通这方面，很重要的一点是确保带给给客户的信息是正确并能到达的的。当客户没下单前，了解客户的性质(是中间商还是最终使用者)，到达知己知彼。在客户下单后，需及时向客户汇报交期，询问是否仍有询价。
3。发货后，可在客户收到货一周后追踪产品的质量反馈，如有问题，首先要明确自我对于这个事件的态度，同时要及时帮客户解决问题，
4。在追踪客户这方面，适时发邮件向客户问候并询问是否有采购计划，每次追踪问候都需不一样，换个方式问。备忘客户的一些重大节日和生日，在这些有纪念好处的日子里送上自我的一份祝福，给客户心底留下一个亲切的印象。
三.20xx销售目标
明年的销售目标最基本的是做到月月有进帐的单子，争取2~3个大订单，向年销售额60万进军。根据自我制定的任务，把任务根据具体状况分解到每个季度、每月、每周、每日，在不断归纳总结吸取教训的基础上提高销售业绩。
1。年销售目标：60万。
2。月销售目标：5万。
①现有已成交客户8个，争取明年争取更多的订单，保证成交量在10万以上;
②优化网站，收更多的询盘，用心跟进客户，争取成交量在10万以上;
③搜索引擎营销，比如，等国际搜索引擎上的搜索，争取成交量在10万以上;④国际展会、交流会，提前做好宣传资料及产品报价资料的详尽文件图片，寻找更多的客户;⑤重点参考之前成功案例分析有效的营销途径和方式方法。
四.明年对自我有以下要求
1。做好每一天的工作记录，避免遗忘重要事项。做好客户的跟踪，对客户的联系进度及时记录，对以往与客户相互间发送的技术及报价资料要归类整理好，以便随时联系。与外贸的同事一齐总结，周一小结，每月一大结，看看有哪些工作上的失误，及时改正下次不要再犯。2。接触客户之前要多查、了解顾客所在的公司的主要产品，不要千篇一律的回复邮件。以便决定客户的需要和问题，然后针对顾客的需要和问题，提出建设性的意见。如提出能够增加顾客销售量或能够使顾客节省费用、增加利润的方法。向客户做出建设性意见，会更有利于赢得客户的好感，这样能够给客户留下良好的印象，有利于长期接触。了解市场需求，客户需求，争取“按照客户需要带给定制服务”
3。对客户不能有隐瞒和欺骗，这样才会有长远的客户。在有些问题上你和客户是一致的。对所有客户的工作态度都要一样，但不能太低三下气。给客户一好印象，为公司树立更好的形象。客户遇到问题，不能置之不理必须要尽全力帮忙他们解决。要先做人再做生意，先卖信誉后卖产品，让客户相信我们的工作实力，才能更好的完成任务。
以上就是我这一年的工作计划，工作中总会有各种各样的困难，我会向领导请示，向同事探讨，共同努力克服。要有好业绩就得加强业务学习，开拓视野，丰富知识，不断学习行业新知识，新产品，为客户带来实用的资讯，更好为客户服务。
个人的工作计划(三)
现在我已经在公司担任业务员有四年的时间了。可以说我是公司数得着的老业务员之一，也是对公司的发展有一定贡献了。现在20xx年将结束，我想在岁末的时候就我一年的工作做一下总结，也对自己的工作提前写下了20xx年业务员工作计划范文，让自己在假期中能够安稳的度过，也让自己能够及时的认识到当前的形势，希望不会让自己失望!
转眼间又要进入新的一年20xx了，新的一年是一个充满挑战、机遇与压力开始的一年，也是我非常重要的一年。出来工作已过个年头，家庭、生活和工作压力驱使我要努力工作和认真学习。在此，我订立了本年度工作计划，以便使自己在新的一年里有更大的进步和成绩。
一、熟悉公司新的规章制度和业务开展工作。公司在不断改革，订立了新的规定，特别在诉讼业务方面安排了专业法律事务人员协助。作为公司一名老业务人员，必须以身作责，在遵守公司规定的同时全力开展业务工作。
在第一季度，以诉讼业务开拓为主。针对现有的老客户资源做诉讼业务开发，把可能有诉讼需求的客户全部开发一遍，有意向合作的客户安排法律事务专员见面洽谈。期间，至少促成两件诉讼业务，代理费用达万元以上(每件万元)。做诉讼业务开发的同时，不能丢掉该等客户交办的各类业务，与该等客户保持经常性联系，及时报告该等客户交办业务的进展情况。
在第二季度的时候，以商标、专利业务为主。通过到专业市场、参加专业展销会、上网、电话、陌生人拜访等多种业务开发方式开发客户，加紧联络老客户感情，组成一个循环有业务作的客户群体。以至于达到4.万元以上代理费(每月不低于 1.万元代理费)。在大力开拓市场的同时，不能丢掉该等客户交办的各类业务，与该等客户保持经常性联系，及时报告该等客户交办业务的进展情况。
第三季度的“十一”“中秋”双节，带来的无限商机，给后半年带来一个良好的开端。并且，随着我对高端业务专业知识与综合能力的相对提高，对规模较大的企业符合了《中国驰名商标》或者《xx省著名商标》条件的客户，做一次有针对性的开发，有意向合作的客户可以安排业务经理见面洽谈，争取签订一件《xx省著名商标》，承办费用达7.万元以上。做驰名商标与著名商标业务开发的同时，不能丢掉该等客户交办的各类业务，与该等客户保持经常性联系，及时报告该等交办业务的进展情况。
第四季度就是年底了，这个时候要全力维护老客户交办的业务情况。首先，要逐步了解老客户中有潜力开发的客户资源，找出有漏洞的地方，有针对性的做可行性建议，力争为客户公司的知识产权保护做到最全面，代理费用每月至少达万元以上。
二、制订学习计划。学习，对于业务人员来说至关重要，因为它直接关系到一个业务人员与时俱进的步伐和业务方面的生命力。我会适时的根据需要调整我的学习方向来补充新的能量。专业知识、综合能力、都是我要掌握的内容。知己知彼，方能百战不殆，在这方面还希望业务经理给与我支持。
三、增强责任感、增强服务意识、增强团队意识。积极主动地把工作做到点上、落到实处。我将尽我最大的能力减轻领导的压力。
以上，是我对20xx年的个人工作计划，可能还很不成熟，希望领导指正。火车跑的快还靠车头带，我希望得到公司领导、部门领导的正确引导和帮助。展望 20xx年，我会更加努力、认真负责的去对待每一个业务，也力争赢的机会去寻求的客户，争取的单，完善业务开展工作。相信自己会完成新的任务，能迎接20xx年新的挑战。
20xx年，我有着的期待，相信自己一定能够在20xx年取得更大的进步，自己就是这样一年一年的走过来的，从一个什么都不懂的毛头小伙到现在很有深度的资深公司业务员，我的成长充满了曲折，不过在今后的工作中，我还是需要继续不断的努力，相信自己在 20xx年一定走的更远!
个人的工作计划(四)
转眼间又到了新的一年。20xx，又是一个充满挑战、机遇与压力并存的一年。应对竞争激烈而又现实的社会，生活和工作压力驱使我要努力工作和认真学习。让自我成为一个有真正实力的人!
在此我订立了工作计划，以便自我在新的一年里又更大的进步和成绩。
一：熟悉公司的规章制度和工程管理的开展，熟悉自我工作岗位的业务流程。
二：增强职责感、增强服务意识、增强团队意识。用心主动地把工作做到点上、落到实处。我将尽我最大的潜力减轻领导的压力。明确自我的工作职责，遇到问题时要及时的去分析问题，解决问题，服从上级的安排。
三：公司在不断的改革，订立了新的规定，作为公司的一员，务必以身作则，遵守公司的规定。
如何开展工作：
1。以寻找目标市场的商业网站、行业协会网站、商会网站及产品专业网站为方向，了解并联系目标市场知名度高销售网络庞大的进口商。
2。基于目前手头联系的较多的客户，打算先从其着手，了解的途径主要按照上述说明的方向。透过谷歌和百度等网络搜索引擎找到相关网站网址。
3。准确明白其他国家一些大采购商的联系方式后，接下来就是如何将他们开发成为我们的客户了。
4。认真对待收到的每封询盘，及时处理并跟进客户。必要时做好相应笔记。在一些免费的b2b平台上，发布产品信息，推广我们的产品。
同时在与客户沟通的过程中，挖掘他们国家同行业进口的信息。至于能收获多少，看沟通方式和客户的意愿等因素了。
5。对已经下单的客户，制作客户维护跟进表，详细记录跟进信息，了解产品使用反馈信息，掌握变动。
6。对意向客户，多多持续联系，有计划有区别的发送邮件，并电话联系。7。对意向不明确的客户，按照开发信模板，每两天发一封邮件。8。每周五做好工作总结
以上是我针对20xx年的工作计划和发展方向，我会更加努力、认真负责的去对待本岗位的工作，期望透过自我的努力和他人的协助能够成功的达成计划并突破，取得更好的成绩并提高自我。
个人的工作计划(五)
此刻我已经在公司担任业务员有四年的时光了。能够说我是公司数得着的老业务员之一，也是对公司的发展有必须贡献了。此刻20xx年将结束，我想在岁末的时候就我一年的工作做一下总结，也对自我的工作提前写下了20xx年业务员工作计划范文，让自我在假期中能够安稳的度过，也让自我能够及时的认识到当前的形势，期望不会让自我失望!
转眼间又要进入新的一年20xx年了，新的一年是一个充满挑战、机遇与压力开始的一年，也是我十分重要的一年。出来工作已过个年头，家庭、生活和工作压力驱使我要努力工作和认真学习。在此，我订立了本年度工作计划，以便使自我在新的一年里有更大的进步和成绩。
一、熟悉公司新的规章制度和业务开展工作。公司在不断改革，订立了新的规定，个性在诉讼业务方面安排了专业法律事务人员协助。作为公司一名老业务人员，务必以身作责，在遵守公司规定的同时全力开展业务工作。
在第一季度，以诉讼业务开拓为主。针对现有的老客户资源做诉讼业务开发，把可能有诉讼需求的客户全部开发一遍，有意向合作的客户安排法律事务专员见面洽谈。期间，至少促成两件诉讼业务，代理费用达万元以上(每件万元)。做诉讼业务开发的同时，不能丢掉该等客户交办的各类业务，与该等客户持续经常性联系，及时报告该等客户交办业务的进展状况。[由整理]
在第二季度的时候，以商标、专利业务为主。透过到专业市场、参加专业展销会、上网、电话、陌生人拜访等多种业务开发方式开发客户，加紧联络老客户感情，组成一个循环有业务作的客户群体。以至于到达4。万元以上代理费(每月不低于1。万元代理费)。在大力开拓市场的同时，不能丢掉该等客户交办的各类业务，与该等客户持续经常性联系，及时报告该等客户交办业务的进展状况。
第三季度的十一中秋双节，带来的无限商机，给后半年带来一个良好的开端。并且，随着我对高端业务专业知识与综合潜力的相对提高，对规模较大的企业贴合了《中国驰名商标》或者《广东省著名商标》条件的客户，做一次有针对性的开发，有意向合作的客户能够安排业务经理见面洽谈，争取签订一件《广东省著名商标》，承办费用达7。万元以上。做驰名商标与著名商标业务开发的同时，不能丢掉该等客户交办的各类业务，与该等客户持续经常性联系，及时报告该等交办业务的进展状况。
第四季度就是年底了，这个时候要全力维护老客户交办的业务状况。首先，要逐步了解老客户中有潜力开发的客户资源，找出有漏洞的地方，有针对性的做可行性推荐，力争为客户公司的知识产权保护做到最全面，代理费用每月至少达万元以上。
二、制订学习计划。学习，对于业务人员来说至关重要，因为它直接关系到一个业务人员与时俱进的步伐和业务方面的生命力。我会适时的根据需要调整我的学习方向来补充新的能量。专业知识、综合潜力、都是我要掌握的资料。知己知彼，方能百战不殆，在这方面还期望业务经理给与我支持。
三、增强职责感、增强服务意识、增强团队意识。用心主动地把工作做到点上、落到实处。我将尽我最大的潜力减轻领导的压力。
以上，是我对20xx年的个人工作计划，可能还很不成熟，期望领导指正。火车跑的快还靠车头带，我期望得到公司领导、部门领导的正确引导和帮忙。展望20xx年，我会更加努力、认真负责的去对待每一个业务，也力争赢的机会去寻求的客户，争取的单，完善业务开展工作。相信自我会完成新的任务，能迎接20xx年新的挑战。
20xx年，我有着的期盼，相信自我必须能够在20xx年取得更大的进步，自我就是这样一年一年的走过来的，从一个什么都不懂的毛头小伙到此刻很有深度的资深公司业务员，我的成长充满了曲折，但是在今后的工作中，我还是需要继续不断的努力，相信自我在20xx年必须走的更远!
篇16：对外贸易代理合同
方责任：
1.乙方负责与国外供货商联络，确定货物的规格、质量、数量和价格条件;
2.承担进出口过程中发生的一切费用(银行费用、换单费、保险费、报关报检费、检验检疫费、运输费、仓储费等)，将上述款项直接支付给相关收款单位或交给第三方代付;
3.乙方应在接到关税和海关代征增值税税票后按时向代收银行缴纳税款;
4.如代理进出口商品属免税、许可证商品，乙方负责办理相关的手续或证明，由此引起的一切责任和损失由乙方负担;
5.守法经营，不伪报、不满报，单单相符、单货相符、如实申报、提供货物的真实情况，对于伪报商品名称、夹带走私物品、高值低报、少报通关数量等违反相关法律法规的行为，乙方承担一切责任和后果，并赔偿给甲方造成的损失。
四、在贸易合同执行中，如因国外客户或乙方的原因造成合同的变更、解除、终止或违反合同致使变更或终止本协议，甲方不承担责任，因甲方代理行为的过错造成的损失除外。
五、甲方在执行本协议中，对于乙方或第三方的经济、刑事等纠纷，甲方不负连带责任。由此给甲方造成的损失，乙方承担全部责任。
六、如因执行本协议发生纠纷，适用《对外贸易代理制暂行规定》，《对外贸易法》作为本协议的准据法。
七、若甲乙双方发生争执纠纷，应协商解决，协商不成，由甲方所在地法院管辖。
八、本协议正本一式两份，甲乙双方各执一份，副本若干份送甲方据以审批、核算、对外付汇等。
九、本协议自签订之日起生效，有效期为一年，对双方具有同等约束力。
甲方：(公章) 乙方：(公章)
代理人： 代理人：
日期： 日期：
篇17：海运出口运输合作协议[页2]_合同范本
2.10 甲方于每月初将上个月乙方欠费清单传交乙方。乙方需于三个工作日予以确认，如有疑义即应向甲方提出书面更改要求，如无疑义最迟应于收到甲方运费清单后的五个工作日之内付清运费。运价生效日期以开航日期为准。
三、结算方式
经甲，乙双方协商，乙方同意按以下第种方式结算费用，并签发提单。
3.1 海洋运费以美元结算。如以人民币结算，汇率暂以：1美元=_________人民币。
3.2 凡乙方指定第三方付款，发生的拒付，少付，延期等事宜，乙方仍负有支付的义务。
3.3 乙方对于应付给甲方的费用，应在规定的付款期限内以协议的约定方式支付，不能随意扣减或拒付。
3.4 如遇乙方未按协议规定准时付费，乙方除承担所欠费用每天万分之五违约金外，甲方有权立即终止协议，并有权在海外暂扣货物及国内暂扣乙方所有单证（包括提单，外汇核销单，退税报关单等），直至乙方结清费用止。扣货，证期间，所造成目的港及装货港之额外经济损失，甲方不予承担任何费用和法律责任，完全和全部由乙方承担。
四、协议终止
4.1 甲方或乙方如要提前终止本协议，应提前三十天正式书面并电话确认通知对方财务部，双方应在结清所有费用后本协议才能自动终止。
4.2 协议终止后，协议双方仍应承担原协议内所规定之双方应履行而尚未执行完毕的义务与责任。
五、协议更改
本协议可经双方书面确认修改内容，经双方共同签字确认后依签字日期为准立即生效，任何修改补充内容双方未经签字确认前仍按原协议内容执行。
六、法律与仲裁
6.1 本协议不适用于个人，只使适用于公司。
6.2 甲方，乙方协议签章依公司公章，法人或公司相关职位人士签字为凭。
6.3 本协议所有规定事宜，受中华人民共和国国家法律管辖。
6.4 协议双方执行协议发生争议时，应先行协商解决，如无效以法定程序照章办理。
七、协议生效
7.1 本协议自双方签订之日起生效，生效前，乙方应结清所有甲方签约前已发生之费用，本协议方可执行。
7.2 本协议之有效期自签订日期起，以_________年为限，协议期满之前，甲乙双方如未接获对方正式书面通知，本协议则自动延长一年。
7.3 本协议一式正本二份，双方各执正本一份留存并遵守执行。
7.4 一切附加协议，和本协议同样有效约束双方，否则视为违约，并且违约方承担一切经济损失和法律责任。
八、特别声明
8.1 甲方原则上不接受危险品，半危险品货物的订舱，如乙方有危险品或半危险品货物要委托出运，须提前和事先书面和电话通知甲方。如若违约，则由乙方承担一切法律及经济责任。
8.2 乙方的参展或紧急货物要求出运时，应事前书面通知甲方，经双方确认航期后再行安排订舱装运，否则甲方不承担延误运输之责任。
8.3 货物出运后，乙方要求退运，或更改目的港，或中转港更改运输方式的，须经双方书面确认及有关费用，而乙方尚未於上海预结算费用前，甲方有权暂停执行上述更改要求，期间所产生之额外经济损失由乙方自行承担。
8.4 乙方目的港收货人，经甲方目的港代理通知后，如逾期未提货，目的港产生之额外费用由乙方目的港收货人全部自行承担。如若乙方目的港收货人放弃货物，则由乙方承担目的港所产生的一切费用。
共3页，当前第2页123
篇18：般货物进口合同格式_合同范本
一般货物进口合同格式
合同号码： 签约日期：
买方：
卖方：
本合同由买卖双方缔结，用中、英文字写成，两种文体具有同等效力，按照下述条款，卖方同意售出买方同意购进以下商品：
【章名】 第一部分
1.商品名称及规格
2.生产国别及制造厂商
3.单价（包装费用包括在内）
4.数量
5.总值
6.包装（适合海洋运输）
7.保险（除非另有协议，保险均由买方负责）
8.装船时间
9.装运口岸
10.目的口岸
11.装运唛头，卖方负责在每件货物上用牢固的不褪色的颜料明显地刷印或标明下述唛头，以及目的口岸、件号、毛重和净重、尺码和其它买方要求的标记。如系危险及/或有毒货物，卖方负责保证在每件货物上明显地标明货物的性质说明及习惯上被接受的标记。
12.付款条件：买方于货物装船时间前一个月通过＿＿＿＿＿＿银行开出以卖方为抬头的不可撤销信用证，卖方在货物装船启运后凭本合同交货条款第18条a款所列单据在开证银行议付贷款。上述信用证有效期将在装船后15天截止。
13.其它条件：除非经买方同意和接受，本合同其它一切有关事项均按第二部分交货条款之规定办理，该交货条款为本合同不可分的部分，本合同如有任何附加条款将自动地优先执行附加条款，如附加条款与本合同条款有抵触，则以附加条款为准。
【章名】 第二部分
【章名】 14.fob/fas条件
14.1.本合同项下货物的装运舱位由买方或买方的运输代理人＿＿＿＿＿＿＿＿＿＿＿租订。
14.2.在fob条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期装上买方所指定的船只。
14.3.在fas条件下，卖方应负责将所订货物在本合同第8条所规定的装船期内按买方所通知的任何日期交到买方所指定船只的吊杆下。
14.4.货物装运日前10－15天，买方应以电报或电传通知卖方合同号、船只预计到港日期、装运数量及船运代理人的名称。以便卖方经与该船运代理人联系及安排货物的装运。卖方应将联系结果通过电报或电传及时报告买方。如买方因故需要变更船只或者船只比预先通知卖方的日期提前或推迟到达装运港口，买方或其船运代理人应及时通知卖方。卖方亦应与买方的运输代理或买方保持密切联系。
14.5.如买方所订船只到达装运港后，卖方不能在买方所通知的装船时间内将货物装上船只或将货物交到吊杆之下，卖方应负担买方的一切费用和损失，如空舱费、滞期费及由此而引起的及/或遭受的买方的一切损失。
14.6.如船只撤换或延期或退关等而未及时通知卖方停止交货，在装港发生的栈租及保险费损失的计算，应以代理通知之装船日期（如货物晚于代理通知之装船日期抵达装港，应以货物抵港日期）为准，在港口免费堆存期满后第十六天起由买方负担，人力不可抗拒的情况除外。上述费用均凭原始单据经买方核实后支付。但卖方仍应在装载货船到达装港后立即将货物装船，交负担费用及风险。
【章名】 15.c＆f条件
15.1.卖方在本合同第8条规定的时间之内应将货物装上由装运港到中国口岸的直达船。未经买方事先许可，不得转船。货物不得由悬挂中国港口当局所不能接受的国家旗帜的船装载。
15.2.卖方所租船只应适航和适货。卖方租船时应慎重和认真地选择承运人及船只。买方不接受非保赔协会成员的船只。
15.3.卖方所租载货船只应在正常合理时间内驶达目的港。不得无故绕行或迟延。
15.4.卖方所租载货船只船龄不得超过15年。对超过15年船龄的船只其超船龄额外保险费应由卖方负担。买方不接受船龄超过二十年的船只。
15.5.一次装运数量超过一千吨的货载或其它少于一千吨但买方指明的货载，卖方应在装船日前至少10天用电传或电报通知买方合同号、商品名称、数量、船名、船龄、船籍、船只主要规范、预计装货日、预计到达目的港时间、船公司名称、电传和电报挂号。
15.6.一次装运一千吨以上货载或其它少于一千吨但买方指明的货载，其船长应在该船抵达目的港前7天和24小时分别用电传或电报通知买方预计抵港时间、合同号、商品名称及数量。
15.7.如果货物由班轮装运，载货船只必须是＿＿＿＿＿＿船级社最高船级或船级协会条款规定的相同级别的船级，船只状况应保持至提单有效期终了时止，以装船日为准船龄不得超过20年。超过20年船龄的船只，卖方应负担超船龄外保险费。买方绝不接受超过25年船龄的船只。
15.8.对于散件货，如果卖方未经买方事前同意而装入集装箱，卖方应负责向买方支付赔偿金，由双方在适当时间商定具体金额。
15.9.卖方应和载运货物的船只保持密切联系，并以最快的手段通知买方船只在途中发生的一切事故，如因卖方未及时通知买方而造成买方的一切损失卖方应负责赔偿。
【章名】 16.cif条件
在cif条件下，除本合同第15条c＆f条件适用之外卖方负责货物的保险，但不允许有免赔率。
【章名】 17.装船通知
货物装船完毕后48小时内，卖方应即以电报或电传通知买方合同号、商品名称、所装重量（毛/净）或数量、发票价值、船名、装运口岸、开船日期及预计到达目的港时间。如因卖方未及时用电报或电传给买方以上述装船通知而使买方不能及时保险，卖方负责赔偿买方由此而引起的一切损害及/或损失。
【章名】 18.装船单据
18.a.卖方凭下列单据向付款银行议付货款：
18.a.1.填写通知目的口岸的＿＿＿＿＿＿＿＿＿＿运输公司的空白抬头、空白背书的全套已装运洋轮的清洁提单（如系c＆f/cif条款则注明“运费已付”，如系fob/fas条款则注明“运费待收”）。
18.a.2.由信用证受益人签名出具的发票5份，注明合同号、信用证号、商品名称、详细规格及装船唛头标记。
18.a.3.两份由信用证受益人出具的装箱单及/或重量单，注明每件货物的毛重和净重及/或尺码。
18.a.4.由制造商及/或装运口岸的合格、独立的公证行签发的品质检验证书及数量或重量证书各两份，必须注明货物的全部规格与信用证规定相符。
18.a.5.本交货条件第17条规定的装船通知电报或电传副本一份。
18.a.6.证明上述单据的副本已按合同要求寄出的书信一封。
&nbs
p; 18.a.7.运货船只的国籍已经买主批准的书信一封。
18.a.8.如系卖方保险需提供投保不少于发票价值110％的一切险和战争险的保险单。
18.b.不接受影印、自动或电脑处理、或复印的任何正本单据，除非这些单据印有清晰的“正本”字样，并经发证单位授权的领导人手签证明。
18.c.联运提单、迟期提单、简式提单不能接受。
18.d.受益人指定的第三者为装船者不能接受，除非该第三者提单由装船者背书转受益人，再由受赠人背书后方可接受。
18.e.信用证开立日期之前出具的单据不能接受。
18.f.对于c＆f/cif货载，不接受租船提单，除非受益人提供租船合同、船长或大副收据、装船命令、货物配载图及或买方在信用证内所要求提供的其它单据副本各一份。
18.g.卖方须将提单、发票及装箱单各两份副本随船带交目的口岸的买方收货代理人＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿。
18.h.载运货船启碇后，卖方须立即航空邮寄全套单据副本一份给买方，三份给目的口岸的对外贸易运输公司分公司。
18.i.卖方应负责赔偿买方因卖方失寄或迟寄上述单据而使买方遭受的一切损失。
18.j.中华人民共和国境外的银行费用由卖方负担。
【章名】 19.合同所订货物如用空运，则本合同有关海运的一切条款均按空运条款执行。
【章名】 20.危险品说明书
凡属危险品及/或有毒，卖方必须提供其危险或有毒性能、运输、仓储和装卸注意事项以及防治、急救、消防方法的说明书，卖方应将此项说明书各三份随同其他装船单据航空邮寄给买方及目的口岸的＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿运输公司。
【章名】 21.检验和索赔
货物在目的口岸卸毕60天内（如果用集装箱装运则在开箱后60天）经中国进出口商品检验局复验，如发现品质、数量或重量以及其它任何方面与本合同规定不符，除属于保险公司或船行负责者外，买方有权凭上述检验局出具的检验证书向卖方提出退货或索赔。因退货或索赔引起的一切费用包括检验费、利息及损失均由卖方负担。在此情况下，凡货物适于抽样及寄送时如卖方要求，买方可将样品寄交卖方。
【章名】 22.赔偿费
因“人力不可抗拒”而推迟或不能交货者除外，如果卖方不能交货或不能按合同规定的条件交货，卖方应负责向买方赔偿由此而引起的一切损失和遭受的损害，包括买价及/或买价的差价、空舱费、滞期费，以及由此而引起的直接或间接损失。买方有权撤销全部或部分合同，但并不妨碍买方向卖方提出索赔的权利。
【章名】 23.赔偿例外
由于一般公认的“人力不可抗拒”原因而不能交货或延迟交货，卖方或买方都不负责任。但卖方应在事故发生后立即用电报或电传告买方并在事故发生后15天内航空邮寄买方灾害发生地点之有关政府机关或商会所出具的证明，证实灾害存在。如果上述“人力不可抗拒”继续存在60天以上，买方有权撤销合同的全部或一部。
【章名】 24.仲裁
双方同意对一切因执行和解释本合同条款所发生的争议，努力通过友好协商解决。在争议发生之日起一个合理的时间内，最多不超过90天，协商不能取得对买卖双方都满意的结果时，如买方决定不向他认为合适的有管辖权的法院提出诉讼，则该争议应提交仲裁。除双方另有协议，仲裁应在中国北京举行，并按中国国际贸易促进委员会对外贸易仲裁委员会所制订的仲裁规则和程序进行仲裁，该仲裁为终局裁决，对双方均有约束力。仲裁费用除非另有决定，由败诉一方负担。
卖方： 买方：
【名称】 1. purchase contract
【题注】
【章名】 whole doc.
contract no:
date:
the buyer:
the seller:
the contract, made out, in chinese and english, both version being
equally authentic, by and between the seller and the buyer whereby the
seller agrees to sell and the buyer agrees to buy the undermentioned goods
subject to terms and conditions set forth hereinafter as follows:
【章名】 section 1
1 name of commodity and specification
2 country of origin & manufacturer
3 unit price (packing charges included)
4 quantity
5 total value
6 packing (seaworthy)
7 insurance (to be covered by the buyer unless otherwise)
8 time of shipment
9 port of loading
10 port of destination
mark shown as below in addition to the port of destination, package
number, gross and net weights, measurements and other marks as the buyer
may require stencilled or marked conspicuously with fast and unfailing
pigments on each package. in the case of dangerous and/or poisonous cargo
(es), the seller is obliged to take care to ensure that the nature and the
generally adopted symbol shall be marked conspicuously on each package.
12 terms of payment:
one month prior to the time of shipment the buyer shall open with the
bank of _______an irrevocable letter of credit in favour of the seller
payable at the issuing bank against presentation of documents as
stipulated under clause 18. a. of section ii, the terms of delivery of
this contract after departure of the carrying vessel. the said letter of
credit shall remain in force till the 15th day after shipment.
13 other terms:
unless otherwise agreed and accepted by the buyer, all other matters
related to this contract shall be governed by section ii, the terms of
delivery which shall form an integral part of this contract. any
supplementary terms and conditions that may be attached to this contract
shall automatically prevail over the terms and conditions of this contract
if such supplementary terms and conditions come in conflict with terms and
conditions herein and shall be binding upon both parties.
for the seller for the buyer
【章名】 section 2
【章名】 14 fob/fas terms
14.1 the shipping space for the contracted goods shall be booked by
the buyer or the buyers shipping agent __________.
14.2 under fob terms, the seller shall undertake to load the
contracted goods on board the vessel nominated by the buyer on any date
notified by the buyer, within the time of shipment as stipulated in clause
8 of this contract.
14.3 under fas terms, the seller shall undertake to deliver the
contracted goods under the tackle of the vessel nominated by the buyer on
any date notified by the buyer, within the time of shipment as stipulated
in clause 8 of this contract.
14.4 10-15 days prior to the date of shipment, the buyer shall inform
the seller by cable or telex of the contract number, name of vessel, eta
of vessel, quantity to be loaded and the name of shipping agent, so as to
enable the seller to contact the shipping agent direct and arrange the
shipment of the goods. the seller shall advise by cable or telex in time
the buyer of the result thereof. should, for certain reasons, it become
necessary for the buyer to replace the named vessel with another one, or
should the named vessel arrive at the port of shipment earlier or later
than the date of arrival as previously notified to the seller, the buyer
or its shipping agent shall advise the seller to this effect in due
time.
the seller shall also keep in close contact with the agent or the buyer.
14.5 should the seller fail to load the goods on board or to deliver
the goods under the tackle of the vessel booked by the buyer. within the
time as notified by the buyer, after its arrival at the port of shipment
the seller shall be fully liable to the buyer and responsible for all
losses and expenses such as dead freight, demurrage. consequential losses
incurred upon and/or suffered by the buyer.
14.6 should the vessel be withdrawn or replaced or delayed eventually
or the cargo be shut out etc., and the seller be not informed in good time
to stop delivery of the cargo, the calculation of the loss in storage
expenses and insurance premium thus sustained at the loading port shall be
based on the loading date notified by the agent to the seller (or based on
the date of the arrival of the cargo at the loading port in case the cargo
should arrive there later than the notified loading date). the
abovementioned loss to be calculated from the 16th day after expiry of the
free storage time at the port should be borne by the buyer with the
exception of force majeure. however, the seller shall still undertake to
load the cargo immediately upon the carrying vessels arrival at the
loading port at its own risk and expenses. the payment of the afore-said
expenses shall be effected against presentation of the original vouchers
after the buyers verification.
【章名】 15 c&f terms
15.1 the seller shall ship the goods within the time as stipulated in
clause 8 of this contract by a direct vessel sailing from the port of
loading to china port. transhipment on route is not allowed without the
buyers prior consent. the goods shall not be carried by vessels flying
flags of countries not acceptable to the port authorities of china.
15.2 the carrying vessel chartered by the seller shall be seaworthy
and cargoworthy. the seller shall be obliged to act prudently and
conscientiously when selecting the vessel and the carrier when chartering
such vessel. the buyer is justified in not accepting vessels chartered by
the seller that are not members of the piclub.
15.3 the carrying vessel chartered by the seller shall sail and arrive
at the port of destination within the normal and reasonable period of
time. any unreasonable aviation or delay is not allowed.
15.4 the age of the carrying vessel chartered by the seller shall not
exceed 15 years. in case her age exceeds 15 years, the extra average
insurance premium thus incurred shall be borne by the seller. vessel over
20 years of age shall in no event be acceptable to the buyer.
15.5 for cargo lots over 1,000 m/t each, or any other lots less than
1,000 metric tons but identified by the buyer, the seller shall, at least
10 days prior to the date of shipment, inform the buyer by telex or cable
of the following information: the contract number, the name of commodity,
quantity, the name of the carrying&nbs
p; vessel, the age, nationality, and
particulars of the carrying vessel, the expected date of loading, the
expected time of arrival at the port of destination, the name, telex and
cable address of the carrier.
15.6 for cargo lots over 1,000 m/t each, or any other lots less than
1,000 metric tons but identified by the buyer, the master of the carrying
vessel shall notify the buyer respectively 7 (seven) days and 24
(twenty-four) hours prior to the arrival of the vessel at the port of
destination, by telex or cable about its eta (expected time of arrival),
contract number, the name of commodity, and quantity.
15.7 if goods are to be shipped per liner vessel under liner bill of
lading, the carrying vessel must be classified as the highest ____________
or equivalent class as per the institute classification clause and shall
be so maintained throughout the duration of the relevant bill of lading.
nevertheless, the maximum age of the vessel shall not exceed 20 years at
the date of loading. the seller shall bear the average insurance premium
for liner vessel older than 20 years. under no circum -stances shall the
buyer accept vessel over 25 years of age.
15.8 for break bulk cargoes, if goods are shipped in containers by the
seller without prior consent of the buyer, a compensation of a certain
amount to be agreed upon by both parties shall be payable to the buyer by
the seller.
15.9 the seller shall maintain close contact with the carrying vessel
and shall notify the buyer by fastest means of communication about any and
all accidents that may occur while the carrying vessel is on route. the
seller shall assume full responsibility and shall compensate the buyer for
all losses incurred for its failure to give timely advice or notification
to the buyer.
篇19：英文简历的书写技巧_外贸信函_网
现在许多单位都希望应聘者有比较扎实的英文基础，特别是外企和涉外交往比较多的单位，一份漂亮的英文简历会帮助你给用人单位留下很好的印象。刚刚走出校园的学生由于工作经验很少，写不出太多的东西， 那么如何把英文简历写得丰满一些呢？他给同学们提出了一些小技巧：如在教育背景中写相关课程（但也不要刻意凑字数）；把社会工作放在工作经历中；突出自己的社会实践经历等；另外还要避免一些不必要的错误和不利的因素。并不能因为你的工作经历和学历都很硬就不在简历上下功夫，世界很大，不乏工作经历和学历都很好的应聘者，除了靠背景竞争外，就要看谁的简历写得更professional了。因此，不能对简历仓促而就。 来源:就业信息网
篇20：外贸代理合同
受托方(以下称甲方)：上海某某进出口有限公司
委托方(以下称乙方)：
经友好协商，乙方委托甲方代理出口业务，达成如下协议：
一、代理出口的商品说明：
二、甲方的权利和义务：
1、甲方同乙方指定的外方签订外销合同，该合同内容需要由乙方在签订前确认并负责，并经甲方同意。
2、甲方同乙方指定的供货方签订购货合同或三方购货合同，该合同内容需由乙方在签订前确认并负责，并经甲方同意。
3、按照乙方提供的货物数据及时制作出口报关运输及随寄需要的发票、装箱单、货运委托书、保险单等单据。
4、在自身能力允许的情况下，对需办理出口配额和许可证等的货物，在受到乙方委托后应该积极予以办理各种手续及时取得有关单证，但免除不能及时取得有关单证的责任。
5、货物若需甲方负责商检，甲方则应及时认真作好商品的商检通关工作，以免延误通关等后续工作的进行。
6、在甲方负责报关运输的方式下，积极联络货运代理公司进行定仓保险等事务，保证出口货物安全、及时顺利的出口清关，不延误指定装船日期，但对货物的真实性由乙方负责。
7、及时做好货款在各种方式下的结汇工作，按约定的结算方式同乙方进行结算并规定比例收取代理费。
8、作好货款的核销工作，催促乙方在指定的期限内收到外汇货款，及时收回外汇核销单及出口报关单，在规定的期限内完成外汇核销。
9、若货物需退税的，在收到乙方提供的按退税机关规定的完整的退税凭证后应及时完成退税工作，按协议的结算款项同乙方结算。
10、积极协助应由乙方完成的各项其他工作，在外贸上给予能力范围内的各种支持。
三、乙方的权利和义务：
1、对甲方同外方及供货方签订的协议内容负责，并承担不能完成协议的一切后果。
2、按时、按量、按质准备货物，货物备妥后及时把规格、数量、质量、包装、毛净重等数据告诉甲方，以便甲方及时制作各种单据。
3、对需要出口配额及许可证的货物，应办理相关的申请手续，甲方予以协助完成。也可以委托甲方在能力范围内予以全权办理。但承担甲方不能及时取得该些单证的后果。
4、若由乙方负责货物的商检、订仓、保险及海关清关等工作，乙方应同时承担由此所产生的各种费用。并保证报关单据上的货物与实际装船出口的货物在品质、规格、数量上的完全一致，负责承担由此产生的一切责任和后果。
5、应积极催促外方在指定的期限内(出口报关后三个月内)将货款汇入甲方的指定帐户，并承担不能收到外汇货款和收汇晚于规定期限的一切责任和后果。对于收汇超过三个月的应事先经甲方同意。实际收汇金额低于报关金额不得超过500美元。
6、按协议规定与甲方进行货款计算和支付出口代理费(结算方式单独列项)。
7、在出口清关后的收回出口外汇核销单和出口报关单(核销联)并交于甲方。交于甲方的时间必须在出口报关(以出口报关单上出口时间为准)后90天内，以便甲方及时进行外汇核销。
8、对于要出口退税的业务，乙方必须在出口后4个月内保证甲方完成出口核销。对于核销所需要单据遗失或修改的业务必须在4个月内通知甲方，由甲方到税务机关办理出口退税延期手续;出口报关单(退税联)必须在出口报关(以出口报关单上的出口为准)后60天内交于甲方，对于出口报关单退税联遗失或修改的业务必须60天内通知甲方，由甲方到税务机关办理出口退税的延期手续;应在该货物清关后(以出口报关单出口的时间为准)最迟60天内将出口对应的增值税发票交于甲方，并且增值税发票开票时间在20天内。对于超出上述期限的，造成不能退税的，甲方不承担责任。对于各种退税单据由于有各种错误记录、未通过退税部门的验证及不符合税务机关关于出口退税的规定从而不能进行退税的由乙方自行负责，乙方必须退回甲方向乙方支付的退税款项。如国家出口退税政策变动的，双方应另行协商。
9、积极协助甲方办理其他需甲方完成的工作，协调好中外各方的工作情况。
四、结算约定条款：
1、纯代理方式：
(1)按货值的 %征收出口代理费，最低不少于人民币 元。
(2)乙方同时承担货款在结算中我方所产生的银行费用和清关费用及运输费用。
(3)对于外汇的折人民币汇率按甲方在银行结汇时提供的结汇汇率为准。
(4)具体资金支付：
a t/t方式下：甲方在收到外方的外汇货款后，按汇率折算人民币后两个工作日内将该笔货款扣除代理费后汇入乙方的指定帐户。
b在l/c和托收方式下，甲方将全套准确有效的单据交到指定的议付银行后，在外汇货款进帐后，按汇率折算成人民币后两个工作日内将其扣除代理费后汇入乙方指定帐户。甲方交给银行的单据不管是甲方还是乙方制作的必须通过乙方确认，同时乙方将对由于单据不符等原因造成不能得到银行偿付的情况承担责任和由此产生的一切后果。
2、在出口退税的方式下：
(1)对于外汇的折人民币汇率按甲方在银行结汇时银行提供的结算汇率为准
(2)乙方同时承担货款在结算中我方所产生的银行费用和清关费用及运输费用
(3)甲方按照乙方出口货物价格rmb/usd收取代理费;在扣除双方约定的杂费后(如银行费用、利息、办证费等)，甲方帐面余额凭乙方开具的等额发票支付给乙方。
(4)甲方支付货款的前提条件是必须及时收到乙方开给甲方规定数额的经税务部门验证通过的增值税发票(乙方必须在货物出运清关后60天内收回)和在收到国外的外汇货款之后才能支付给乙方。否则甲方有权拒付该笔货款。
(5)具体资金支付：
a.t/t 方式下：甲方在收到外方的外汇货款后，按汇率折算成人民币后在符合上述结算条件下在两个工作日内将货款支付给乙方。
b在l/c和托收的方式下，甲方将全套准确有效单据交到指定的议付银行后，在外汇货款进帐后，按汇率折算成人民币后两个工作日内将其扣除代理费后汇入乙方指定帐户。甲方交给银行的单据不管是甲方还是乙方制作的必须通过乙方确认，同时乙方将对由于单据不符等原因造成不能得到银行偿付的情况承担责任和由此产生的一切后果。
3、不管何种结算，若需甲方返还利润部分的，乙方都必须开来合法的发票后，甲方才能返还利润部分。
4、但乙方将承担增值税票由于存在各种错误记录、未通过退税部门的验证及该发票和全套出口报关单未能按规定期限及时交给甲方从而不能进行退税的责任和后果，同时乙方也必须及时退还甲方之前所得到的大于收汇的那部分金额的货款。
五、其它约定条款：
1、乙方保证出口的货物是遵守国家的各项法律、法规的合法的货物，否则承担由此产生的一切责任和后果。
2、代理过程中货物的质量问题由乙方全权负责，发生质量问题时由乙方全权处理，甲方协助乙方处理各种索赔、赔付等事宜。
3、甲方保证乙方的商业秘密，并保证不以任何形式擅自利用乙方的客户渠道及商业资料，否则将赔偿乙方由此造成的一切经济及法律后果。
4、本协议在执行过程中由于产生各种双方无法预料的问题(如国家政策发生变化等)，双方将及时进行协商解决，合理调整本协议的有关内容，或拟订补充协议加以规定，该补充协议也将视为本协议的有效部分。
5、甲乙双方需终止本协议的，必须提前2个月以书面的形式通知对方，且之前所签订对外及对内合同必须执行完毕。
6、若产生一方违反本协议条款或产生了争议和分歧，都应本着友好的态度进行协商解决，协商不成的任何一方都有权向法院提请法律诉讼。
7、本协议经甲乙双方签字盖章后生效，正本协议一式贰份，甲乙双方各执一份，二份具有同等的法律效力。
8、本协议有效期从生效之日起的五年内有效。
受托方(盖章)： 委托方(盖章)：
日期：日期：