范本

甲方(雇主)：________ 电话：____________ 地址：________________

乙方(雇员)：________ 身份证号：____________ 电话：____________

根据《中华人民共和国合同法》等有关法律、法规等规定，甲乙双方本着平等、自愿、公平、诚实信用的原则就乙方为甲方提供保姆服务有关事宜，达成如下协议：

一.服务内容及地点：

1.负责每日三餐、洗衣、打扫卫生等家政服务。

2.照顾孩子，接送孩子上下学。

3.服务地点：甲方居住或指定的地点____________

二.服务要求：

乙方应认真负责做好家务，按照协议规定内容履行服务职责。乙方每个月休息____天，具体休息时间根据甲方需要，如乙方有特殊原因须提前和甲方申请，征得甲方同意。

三.服务费用：

乙方每月服务费用为：____元/月，甲方于每月最后一个工作日支付给乙方。

四.甲方权利与义务

甲方有义务提供乙方住宿，并按时支付乙方服务费用。

1.甲方有权要求乙方按照上述服务内容提供服务;

2.甲方有权要求乙方在签订合同时出示有效身份证件，如实说明健康状况以及与健康、安全有关的家庭情况。

3.甲方负责提供乙方在服务期间的饮食，尊重乙方，不歧视、不虐待，保证乙方服务期间的人身、财产安全。

4.甲方不承担乙方在上下班途中、服务期间内突发的疾病或其他伤害产生的费用。

有下列情形之一的，甲方有权解除合同，解聘乙方：⑴乙方有违法行为的;⑵乙方在家政服务过程中给甲方造成较大财产损失的;⑶乙方工作消极懈怠，或不胜任家政服务的;⑷甲方发现乙方患有疾病等不适合继续予以留用的;

5.甲方有权向乙方追究因乙方家政服务故意或重大过失而给甲方造成的损失。 五.乙方权利与义务

1.乙方有权利要求甲方按时支付服务费用;

2.乙方有权利要求甲方为其工作提供必备设备或条件。

3.乙方必须自觉履行上述服务项目，细心做好家务。

4.乙方应讲究个人卫生，着装整洁大方，自己随身用品(衣服、日用品)不要随便乱放，衣服不要和雇主家人的衣服放在一起洗。

5.乙方不能随便往雇主家里带人，有人或事情需见面，应到外面见面。如遇亲友生病等急事，需临时离开时，应及时与甲方沟通，不能擅自离岗;

6.乙方工作期间，如因其过错造成甲方及其家人的人身伤害或财产损毁;应付赔偿责任。

7.未经甲方同意，乙方不得不得随意翻动甲方家中物品，如有偷窃等违法行为，甲方将移送司法机关处理;

8.乙方如欲解除合同，则需要提前30天通知甲方，乙方不得擅自不辞而别，否则，甲方将追究其违约责任。

9.乙方在服务期间所发生的一切安全责任事故，一概由其自行负责，甲方不承担任何责任。 五.合同的生效

1.本合同自双方签字时生效。

2.在本合同执行过程中，如遇到问题，双方应友好协商解决，协商不成，双方可诉至甲方所在地法院解决。

3.本合同一式两份，甲乙双方各执一份。

甲方(签字)：____________

乙方(签字)：____________

签约时间：____年____月____日

秋高气爽,新的一学期又开学了。小儿童园本着"预防为主"的方针,根据本学期气候及小儿童身心发育特点,特拟定以下保健事情规划:

一、把好本学期新入园幼儿的体检关

对于新入园幼儿，每个幼儿必须持有体检表及预防接种卡，并且体检合格后才准入园。本学期中要完成市领期十月份的检查工作，以及11月份的在园幼儿的“龋齿”检查工作

二、做好卫生保健工作

1、认真做好晨检，做到“一摸二看三问四查”。深入各班巡视，发现问题及时处理，加强对体弱儿的管理及患病儿童的全日观察工作并且有次序地做好记录。

2、定期消毒医疗器械和晨检卡。

3、完善各项卫生保健制度，配合园主任做好保育管理。明确各自的职责，调动保育员“服务育人”的积极性。

4、做好儿童的体格发育测量及评价工作。

5、定期检查园内环境卫生及安全工作，发现事故隐患，及时采取措施，避免发生。

6、配合防疫部门进行幼儿的预防接种工作。

7、努力做好幼儿卫生保健软件的全方位的输入工作，虚心请教，积极向有经验的姐妹园学习，勇于革新，力争使我们的软件达到卫生保健合格园。

三、做好儿童营养保健工作

1、管理好儿童膳食，每周制订带量食谱,食物品种多样,注意营养成分的搭配,保证按量供给.每月一次营养计算并分析,要求炊事人员做好饮食卫生及餐具消毒。

2、制定合理的进餐时间与次数,幼儿进餐提倡定时定点定量,各餐合理热能,供给分配,以保证幼儿生长发育需要。

3、随时为幼儿提供饮水机会,水温符合要求。

4、遵守开饭时间，不宜提早或推迟，做好餐前准备，餐后管理工作，分餐时要洗手，分发干菜、干点不直接用手接触。

5、食堂从业人员具有健康证，按食品卫生法烹饪，食物煮熟煮透，生熟分开，操作时保持食品营养素，制作食品色、香、味具全。

四、做好幼儿卫生习惯、消毒工作

1、为幼儿准备清洁卫生，安全符合幼儿特点的盥洗室和入厕设备，进食和入厕后必须用肥皂洗手。特别是小班幼儿，教师要及时教会幼儿洗手的方法，以便养成良好的卫生习惯。

2、将幼儿每天所需餐巾摆放在固定的地方，方便幼儿取用，并及时做好消毒工作。

3、各班加强餐前擦桌子的消毒工作，正确使用消毒液。

4、培养幼儿洗完手后要做双手合起来的动作，保持双手干净的好习惯，加强午餐习惯培养，教育幼儿不能挑食，确保营养的合理吸收。

5、组织好幼儿午餐，就餐秩序好、安静，在规定的时间内吃完。

6、饭后组织幼儿散步，遵守幼儿午睡作息时间。

7、掌握好幼儿看电视的时间，组织幼儿看电视注意坐姿与距离。

五、做好消毒、隔离工作

1、实行一人一杯、一巾专用制度，各班做好标记。

2、消毒柜、紫外线灯专人负责，定时消毒及时记录。

3、定期利用空气和日光中的紫外线消毒一些不宜清洗的玩具、图书、被褥等。

4、加强晨检力度，做到一摸、二看、三问、四查，对有患病的幼儿协助当班老师全面细心的观察，发现问题及时处理。

5、做好流行病的预防工作，对体弱儿加强检疫，防止水痘、流感等流行病的蔓延，对有病患儿所在班级的玩具、物品要彻底消毒、暴晒。

6、及时换洗被褥、枕套(每月清洗一次)，晾晒(每周一次)。

六做好安全保护工作

1、加强幼儿的安全意识教育，各班教师要认真负责，制定规则，杜绝缝针、骨折、烫伤、走失等事故的发生，确保幼儿的身体健康和生命安全。

2、当班和接送幼儿的老师要仔细观察，对可疑者来园接幼儿要仔细询问并登记。

3、坚持不定期的午餐、午睡、卫生安全工作检查。

4、期初、期末组织各班测幼儿身高、体重，中大班测视力，并做好记载与评价。

5、做好体弱儿与肥胖儿的管理工作。

敬爱的校团委：

您好，我是本校初中部的学生，今年刚升高二，我志愿加入共青团!

共青团是党的忠实助手，是一所马克思主义的大学校。在这座共产主义的大熔炉里，培养了一批又一批的先进青年、伟大祖国的建设者、捍卫者，铸造了一代又一代共产主义战士。中国共产主义青年团坚决拥护中国共产党的纲领，以马克思烈宁主义、毛泽东思想为行动指南，用建设有中国特色社会主义的理论武装全团，解放思想、实事求是，团结全国各族青年，把我国建设成为富强、民主、文明的社会主义现代化国家，为最终实现共产主义的社会制度而奋斗。她是在中国共产党领导下发展壮大的，始终站在革命斗争的前列，有着光荣的历史。在建立新中国，确立和巩固社会主义制度，发展社会主义的经济、政治、文化的进程中发挥了生力军和突击队的作用。

在新的长征中，共青团紧紧团结在一起，教育了广大进步青年，成为进步青年的组织核心，协助党加强对青年一代的培养教育，使广大青年加强了对中国共产党的认识，从1920xx年中国共青团在广州正式成立至今，共青团组织一直领导着广大青年靠拢在中国共产党的周围。我们要继承和发扬共青团光荣传统，在团中央的领导下，在新的长征中书写更加灿烂的新篇章。

请团组织给我一个机会，让我加入这个优秀的组织!

此致

敬礼!

申请人：

x年xx月xx日

尊敬的各位领导:

大家好!

将近一个月的口腔内科实习过程中本人始终坚持“在服务中学习，在学习中服务”的理念，树立爱伤观念，学习处理好医患关系，培养全心全意为患者服务的职业道德，对医疗工作的高度负责的精神和认真仔细的工作作风。实习期间在带教老师的细心指导下，能基本完成口腔内科实习中的日常门诊诊治以及每周一到两天的急诊，病房会诊工作，并且基本掌握口腔科常见疾病的诊断，鉴别诊断，治疗原则和方法，能较为准确的采集病史，规范的进行口腔的常规检查和必要的特殊辅助检查，病历书写字迹工整，清晰，有条理，逻辑性强，能积极配合和协助带教老师日常诊疗工作，但在一些细节问题上，还不纯熟，尚待完善。

在口腔修复科的实习期间始终保持谦逊与不耻下问的态度，在习惯了医院的繁忙，紧凑的工作氛围的同时，更多的是口腔临床工作给予我的满足感和兴趣感，在这个过程中，我不断领悟和学习着。实习期间，在带教老师的耐心指导和鼓励下，经过自己一段时间的观摩和摸索，能较为熟练的运用所学完成口腔修复体的设计和修复后出现问题的处理，能较为准确的对常见的牙颌畸形作出诊断和正畸复诊的熟练操作，工作日渐理清头绪，逐日步入了正轨。更懂得了“闻道有先后，术业有专攻”的道理，不断成长，不断进步，理论和技术更为完善。

口腔外科实习小结:在口腔外科一个月的实习中，增强了我作为一名医学生的职业道德责任感，促进了从医学生到医生角色上午转变，培养了学和靛岗的敬业精神和临床思维能力，学习到了服务艺术，理论联系实际，掌握扎实的基本理论知识，苦练基本技能是口腔外科实习中的体会。

实习期间认真学习书写入院记录，查房，换药，写病程录，跟手术，写出院小结，并基本掌握口腔颌面外科门诊病人的检查，诊断，诊疗和防治原则，在带教老师指导下能处理一些小型的门诊手术和病人急救的处理，另外对手术室无菌操作，无菌技术和手术基本操作(切开，结扎，缝合)以及各种伤口的处理方法有了更为直观的认识，从而让忙碌的工作变得充实而快乐，但由于临床知识和经验的缺乏，在诊疗过程中仍存在很大不足，有待探索和学习。

述职人:

20xx年xx月xx日

一、思想方面

新的一年，同学们都有不少想法，斗志昂扬。要趁这个机会抓同学们的思想建设，在学期初稳定大家的情绪，收心回学校，为自我的目标奋斗。

1、团员教育评议

配合院系团组织的领导，认真完成团员的学习教育，评议和团籍注册以及优秀团员团干的评选。

2、党员培养

作为一名合格的共青团员，我们的目标都是要成为一名共产党员。本学期仍然要抓紧团员的思想教育工作，为共产党输送合格的党员。

二、学习方面

大学生活已经快过去了一半，我们也已经从迷茫阶段走过，开始思考自我的未来。学习无疑是大学生活中的重点。据我了解，本班有考研想法的人占80%左右，所以抓学习也是这学期的工作重点。主要从以下两个方面着手。

1、英语四级考试

六月份的四六级考试是本学期的重点，这个证件的重要性和必要性大家都清楚。这学期要严格要求自我，以自我为榜样，并用心配合老师督促同学们认真听课，仔细复习，争取这次四级考试透过率比较高。

2、读书计划

读书计划是我院这学期的工作重点，这也是对同学们很有好处的一项活动。由于本学期我班的课比较少，又排的很紧凑，所以有整块的闲暇时光，这些时光用来读一些有益的课外书或专业书籍是很有必要的。争取带领大家养成读书的好习惯，也相应了院里的号召。

三、生活方面

在生活上，依然要持续原有的热情，用心地为大家服务，搞好同学之间的关系，营造和谐愉快的氛围，为大家营造一个舒适的学习环境。经常注意同学们的心理状态变化，为大家排忧解难。

四、活动方面

本学期的活动还是比较多的，主要有以下几个：

1、田径运动会

这是全校性最大的运动赛事了，要鼓动大家用心参加，认真训练。在比赛期间，要做好后勤工作，全心全意为运动员服务，努力为运动员加油。

2、排球赛

鼓励班里有此强项的同学用心参加，跟着老师认真训练，为院里争光。

3、模拟导游大赛

这是我院社团组织的活动，当然同学们要用心参加，主动表现自我，展现我院的风采。

以上就是我对本学期的工作计划，新的一年，新的开始，相信在我的努力和与班干的用心配合下，我们团支部会越来越出色!

甲方(车主)： 身份证号： 联系电话： 地址：

乙方(购车人)： 身份证号：联系电话： 地址：

乙方于 年 月 日购得甲方 一辆，经甲乙双方共同协商自愿达成以下协议。

一、该车原始登记时间：

二、甲方自愿将自己的 车及该车的手续和费用卖给乙方，车牌号为： ，车架号为： ，发动机号： 。

三、甲方已将如下车况如实告知乙方：(写明需要告知的车况)

四、乙方已知晓以上甲方告知的车况。

五、甲方承诺已将车辆真实情况全部告知乙方(见第三条列项)，如有隐瞒，乙方可凭车辆检修部门(4s店)的证明向甲方采取以下补偿措施：

1、乙方退车，甲方将购车款全部退还乙方。乙方不付折损费。

2、甲方承担车辆检修费用，并承担由此给乙方造成的经济损失。

六、乙方对第三项所列车况的检验期为 。逾期不再追究甲方的责任 (自购车之日算起) 。购车后乙方正常使用过程中产生的维修费用由乙方承担。

七、此车自 以前与本车发生的一切有关事情及问题由甲方负责，自 以后与本车发生的一切有关事情及问题由乙方负责。

八、购车款 由乙方向甲方一次性付清，车辆在 银行的剩余贷款及利息共计 元由甲方负责偿还。

九、车辆于 年 月 日前一切手续须过户到乙方，相关过户费用由甲方负责，逾期不过户由甲方承担乙方一切损失。

十、自乙方交付购车款之日起，车辆的所有权及使用权等相关权益均归乙方所有，甲方无权过问。

十一、未尽事宜，双方协商解决。

十二、本协议自签订之日起生效，协议一式两份，甲乙双方各执一份。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

转让方(甲方)：_________

受让方(乙方)：_________

房东方(丙方)：_________

根据我国《合同法》的有关规定，经甲、乙、丙三方友好协商，就下述门面转让事宜达成如下协议：

一、转让门面位于柯城区衢化学院路351号，建筑面积39.81平方米，丙方为上述转让门面的所有权人和出租方。现对甲、乙双方根据本合同约定转让上述门面承租权的行为，丙方表现同意。原甲、丙双方所签门面租赁合同的权利与义务转由乙方享有和履行，乙方与丙方不再另行签订租赁合同。本合同生效和门面交接完毕后，甲、丙双方之间原门面租赁合同终止履行，权利义务自行解除。

二、丙方与甲方原租赁合同，约定的租赁期间为三年，即自______年______月______日起______年______月______日止，月租金为每年壹万捌仟元整人民币，现甲方已缴纳租金至______年______月______日。

三、转让门面现有装修设施在转让后归乙方所有。转让门面租赁期(含门面租赁合同续签期限)届满后，该门面装修设施的不动产归丙方所有，营业设备等动产归乙方(动产与不动产的划分按原有租赁合同执行)所有。

乙方在接收该门面后，有权根据经营需要，在保证房屋安全使用的情况下进行再次装修。

四、乙方于本合同签订之日向甲方支付定金壹仟元。甲方在合同签订10日内向乙方腾让门面并交付钥匙，同时乙方向甲方支付转让费共计人民币24000元，(大写：贰万肆仟元整)，上述费用已包括第三条所述的装修、装饰、设备、甲方已经缴纳的门面租金及其他相关费用，此外甲方不得再向乙方索取任何其他费用。

五、甲方保证在转让店铺前的水电费、物业管理费等均已经缴清，乙方接手前该店铺所有的一切债权、债务均由甲方负责;接手后的一切经营行为及产生的债权、债务由乙方负责。

六、转让门面定于______年______月______日正式交接。

七、本合同一式三份，三方各执一份，自三方签字之日起生效。

甲方(签字)：_________乙方(签字)：_________丙方(签字)：_________

______年______月______日______年______月______日______年______月______日

缔约人：________________

出借人(甲方)：________________ 身份证号码：________________

借款人(乙方)：________________ 身份证号码：________________

本合同各方根据《中华人民共和国民法典》的规定，本着平等、真实、自愿的原则，为明确责任，恪守信用，签订本合同，并保证共同遵守。

第一部分 借 贷

第一条 借款种类：________________本借贷行为为民间借贷行为。

第二条 借款用途：________________本合同项下之借款必须合法使用。

第三条 借款金额：________________为人民币(大写)：________________ ________元整，小写：________________￥ ________元(大小写不一致时，以大写为准，以下同)。

第四条 借款期限：________________本借款自 ________年 ________月 ________日起至 ________年 ________月 ________日止，共 个月(借款依借据上所记载的内容为准)。借款借据为本合同组成部分，与本合同具有同等的法律效力。

第五条 贷款利率和计息方式：________________本合同项下借款期限内的月利率(提前还款由本合同第六条另行规定)为 。利息共计 ________元，按 支付，每期利息为 ________元。如逾期付息或还本，每天按贷款余额的 计算逾期利息至全部清偿日为止。

第六条 提前还款：________________借款人若提前还款，应提前15天书面通知出借人。提前全额还款，除按实际借款天数计息外，应就提前还款额另行支付15天的利息。如部分提前还款或者在三个月内(包括三个月)还款，除按实际借款天数计息外，应就提前还款额另行支付30天利息。

第七条 借款人承诺：________________

1. 保证本借款不用于非法活动;

2. 保证按照本合同的约定正当偿还贷款本息;

3. 在出现危及借款安全的情况时，应最迟在事件发生之日起5日内书面通知出借人，并提前偿还贷款本息;

4. 如实提供有关证件、证明和其他材料，在出借人审查其资信材料、还款能力、借款用途、贷款使用情况时予以积极配合。

第八条 出借人承诺：________________

1. 保证本借款来源合法;

2. 按时足额向借款人发放贷款。

第九条 提前收回贷款：________________

出借人无正当理由不得提前收回贷款，如因生计之必需确要提前收回贷款时，应提前30日书面告知借贷人，利息及本金偿付办法由双方另行约定。

如出现下列影响贷款安全的因素，出借人有权在以下任何一项或多项发生时，随时要求借款人在规定的期限内提前清偿部分或全部贷款本息。(包括逾期利息及违约金)，而无须为正当行使上述权利所引起的任何损失负责：________________

1. 借款人将本贷款资金用于非法活动;

2. 借款人违反本合同中任何条款或承诺;

3. 借款人或抵押人丧失民事行为能力，被宣告失踪、死亡且无继承人或受遗赠人不承担债务;

4. 借款人的继承人或财产代管人拒绝为借款人偿还贷款本息;

5. 借款人连续两期未按时偿还贷款利息的;

6. 借款人的资信状况恶化。危及贷款资金安全的;

7. 法律法规规定的其他情形。

第二部分 其 他 约 定

第十条 生效、变更、解除或终止。本合同自各方当事人签字后生效，与借款人在本合同项下的借款本金、利息、违约金及所有其他费用清偿完毕之日终止。如合同需要变更或解除，应由本合同各方共同达成书面协议。书面协议达成之前，合同各条款仍然有效。

第十一条 本合同中各条款如因某种原因导致部分无效，不影响其他部分的效力，也不影响本合同的整体效力，缔约人都应按照约定承担责任。

第十二条 债权债务的转让。在本合同履行期间，出借人可将其在本合同项下的权益转让给第三人，但应书面通知借款人，借款人必须继续履行本合同的责任和义务。未征得出借人的书面同意，借款人不得将其在本合同项下的任何义务转让给第三人。

第十三条 违约责任：________________

1. 缔约人任何一方一般性违约，应向对方支付全部贷款金的5%的违约金;

2. 借款人不能按照本合同的约定向出借人履行还款义务的，视为严重违约，应向出借人支付全部贷款本金的20%的违约金;

第十四条 缔约人同意

在借款人不能履行或不能完全履行合同项下的还款义务时，借贷双方签订的原来只作为抵押借款用途的商品房买卖合同转化为正式的购房凭证，所抵押的房产产权归出借人。

第十五条 缔约人对以上条款均予认可，对由此产生的权利义务明晰，无异议，无疑义。

第十六条 本合同经缔约人签字、捺指印后生效。

第十七条 本合同一式 份，有同等法律效力，缔约人各执一份，其余报有关部门留存。

出借人：________________ ________年 ________月 ________日订立于 。

借款人：________________ ________年 ________月 ________日订立于 。

一、 活动目的及意义：

XX市xx街小学与xx社区联合开展“庆祝八一建军节消夏之夜”主题活动，充分发扬社区和党外知识分子教师的团队精神，树党外知识分子的良好形象。

XX市xx街小学与路社区通过活动努力把双竞双争工作搞好，弘扬民族精神、传播先进文化、树立文明新风，建立学习型社区建设模范。

通过学校与社区联合主办“庆祝八一建军节消夏之夜”活动让社区与xx街小学接对子，创建名牌学校、文明社区，在活动中感谢战“非典”、战洪水的战士们，感谢保卫和平的老红军战士们。

二、 活动主题：“庆祝八一建军节消夏之夜”

三、 活动时间：20xx年7月30日晚7：00—9：30

四、 活动地点：路英语角

五、组织领导：

组长：

副组长：

六、参加人员：市团委领导、路社区爱民艺术团、社区暑假活动站的小朋友、xx街小学党外知识分子、团员、省政府、省人大驻军

七、特邀人员：老红军、老八路

八、活动内容与形式：

xx街小学：踢踏舞、民乐表演、团员合唱、独唱《东西南北兵》等;

路社区爱民艺术团：舞蹈《渔家女》、《欢聚一堂》，女生独唱，男生独唱，现代京剧《智斗》，时装表演，华尔兹，大学生表演等。

为了贯彻落实《关于立即开展撤县建区期间建筑施工质量、安全专项检查的紧急通知》的文件精神和要求，我公司高度重视积极响应，认真地进行了自查自纠活动。现将自查自纠落实情况总结如下：

一、加强组织领导，认真开展了自查自纠活动

公司组织了一次全面的安全检查，此次检查由经理朱进平亲自带队，工程部长杨毓刚，质检部长杜光建，安全员刘东波及项目经理，施工员，质检员，安全员组成的安全检查组，检查中发现存在的一些问题如下：

(1)施工现场电线凌乱，配电箱无门，无锁无警示标志。

(2)整个施工现场无消防器材。

(3)部分管理人员，工人未戴安全帽。

(4)电焊工作业时，不按要求佩戴防护面罩。

(5)钢筋加工棚未挂操作规程牌。对此提出相应整改措施：

(1)按要求、规范配电箱接线，配电箱加盖、配锁并挂警示标志。

(2)项目部积极购买消防器材。

(3)对施工作业人员进行岗前教育，要求其必须佩戴安全帽，安全带等防护用品。

(4)加强对特种作业人员的安全培训，严格按照安全技术交底施工。

二、建章建制，完善管理，把安全职责落实到实处

(1)项目部应与陆续进场的各施工班组，签订安全生产责任书，确保工程安全责任得到层层落实。

(2)成立以项目部经理为首的安全，质量管理体系，制定和完善安全，质量管理规章制度和工艺流程标准，确保工程建设有章可循，做到对检查横向到边，纵向到底，不留死角。层层抓落实，从严治本，将施工现场安全隐患消除在萌芽状态。

三、强化安全教育培训，加强现场管理

提高安全意识，做到安全责任落实到人，坚持岗前培训，凡是进场的工作人员上岗前必须进行技术培训和三级安全教育，考试合格后方可上岗，项目部应经常对员工进行安全培训，讲课，现场指导等形式营造浓厚的安全生产氛围。对于特种作业人员应联系技能部门统一组织培训，确保特殊工种持证上岗。

四、加强应急演练工作

项目部设立应急救援组织机构，编制应急救援预案，规定应急救援小组成员及其职责，并定期组织应急演练。

在以后的施工中，我们会继续加强学习，加大现场管理力度，把责任落实到人，努力实现安全零事故目标。我们也会认真地总结和积累每一个工程中的经验教训，认真贯彻公司的安全制度，把安全当作头等大事来抓，切实做好安全生产工作。

小学三年级班主任德育工作计划范本

班主任要时刻以爱国主义教育为中心，以养成教育为基本内容，在提高德育工作的针对性、实效性上下功夫，推进素质教育，为培养跨世纪的合格建设者和接班人奠定坚实的基础。下面是第一范文网小整理的小学三年级班主任德育工作计划范本，希望对大家有所帮助!

小学三年级班主任德育工作计划范本(一)

一、指导思想：

以学校工作计划及学校德育工作计划为指导思想。

二、工作目标：

1、通过班集体的力量促使学生养成良好学习习惯、卫生习惯、文明习惯;

2、通过习惯的养成促进良好班风的形成，为学生的学习提供良好的外部环境，促使班集体凝聚力增强的同时促使每个孩子在习惯上、道德规范上获得进步;

三、工作措施：

为达到工作目标，实施以下措施：

(一)说明书制度：为帮助学生养成良好习惯，如学习习惯，队列中的习惯，卫生习惯，文明习惯等，对于违反规范的同学的行为进行记录，如被记录达到一定次数，要求学生对自己的行为进行说明。具体来说，被记录5次要求写出200字说明书，被记录8次要求写出300字说明书，被记录10次要求写出500字说明书。说明书的主要内容为：对违规行为的描述，对违规原因的剖析，如何杜绝不良行为的措施。通过写说明书，让学生从思想上认识到自己的错误，从而改正错误，养成良好习惯。

(二)承包制度：淡化班干部职能，强化事务管理者职能。具体来说，把班级中的一些事务，如管理图书角，换水，发牛奶等事务由专人承包，责任到人。这样做，可以强化学生的责任意识，把班级中一些事务具体落实到人;又可以在学生为班级服务的过程中，强化学生的集体意识。

四、具体要求：

(一)上课作业要求。(学习方面)

1、课前做好上课准备。要求预备铃响后，所有同学把学习用口准备好，并准备好上课。

2、上课认真听讲，积极思考，踊跃回答问题;

3、作业按时完成，认真完成，及时订正。

(二)队列要求：

1、队列要做到快、静、齐。

2、队伍必须在40秒内排好;

3、队列里不得讲话;须抬头挺胸，精神抖擞。

(三)卫生要求：

1、注意个人卫生，每天放学后抽屉须干净整齐;

2、班级卫生实行值日生制度。

(四)文明习惯：

1、同学间团结友爱，不打架，不互相谩骂;

2、课间做文明游戏，不追来赶去，不打手打脚;

3、对老师有礼貌。

以上各种习惯通过说明书制度，通过班级协商确定后，由专人进行记录，进行强化，暂促形成良好习惯。

五、对礼仪教育的说明：

1、礼仪教育渗透在日常的教育教学工作中：教育学生学会感恩，做一个懂礼貌的孩子，如经常有老师对学生进行个别教育的情况，教育学生走的时候跟老师说：谢谢老师，老师再见;

2、礼仪教育渗透在各种习惯的养成教育中。一个队列能切实做到快、静、齐的班级，应该会是一个比较有教养的班级;一个注意爱护个人卫生，爱护班级卫生的班级，相信会是一个文明的班级。

六、工作安排：

九月份：

1、明确常规要求，健全各项制度;

2、重点放在队列习惯的养成上;

3、逐步把班级的某些事务承包到个人。

十月份：

1、重点放在卫生习惯、学习习惯的养成上;

2、承包制度更加规范的运行。

十一月份：

巩固前两个月所养成的各种常规，采取措施让学生由制度约束过渡到自我约束。

十二月份：

1、学生各项常规由制度约束过渡到自我约束有一定成效;

2、对承包制度进行总结、表彰;

一月份：

为学生的期末复习创设良好环境。

小学三年级班主任德育工作计划范本(二)

转眼间，假期匆匆而过，忙碌紧张的新学年又来到了。接任班主任工作以后，来到教室看到孩子们一个个意气风发，生机勃勃的样子，我对今后的工作也充满了信心.

上一个学期，在任老师的带领下班集体建设取得了一定的成绩。在各科任课老师的共同努力下，基本上形成了良好的学习氛围，全班形成了一股积极向上的学习风气。在提高成绩的同时，班级的管理工作也得有条不紊的进行。针对上一学期的班级状况，这一学期我又有了新的目标。

能否形成一个积极向上，努力学习，团结和睦的集合是至关重要的。只有在良好的班集体中，教师开展教育和教学活动，才能收到较好效果。特别是三年级，比较特殊，一些学生还处于朦胧阶段，因此更要注意做好引导工作。在培养班集体方面，本学期我主要从以下几方面入手：

一、指导思想

端正学习态度，改变懒汉作风，建立一个团结、文明、守纪、刻苦、勤奋、互助的班集体。使学生全面、健康的发展。

二、情况分析

我班有学生63人，通过上学期的要求，培养。此班学生思想素质比较高，上进心比较强，人人热爱班集体，个个能为班集体争光添彩。学习的劲头足，互助精神强，差生的学习习惯有了好转，成绩也在慢慢提高。此班干部责任心强，有为大家服务的精神。卫生意识比较强，良好的卫生习惯已经养成。但也存在着一些不足，优差悬殊较大，存在着严重的两极分化，一部分接受能力偏低的学生，良好的学习习惯没有养成，上课听讲走神，爱摆弄小东西，思想开“小车”，作业态度不端正，书写质量差，拖拉现象严重。

三、任务与目标

1、做好学生开学的思想工作，使其把心收到学习上。

2、制定班规，明确班规要求，自觉遵守班规纪律。

3、成立新的班委，明确分工，各负其职。

4、开展比学、互助活动，形成浓厚的学习风围。

5、增强卫生意识，培养学生良好的卫生习惯。

6、积极配合学校开展各项活动。

四、方法措施

1、开学后及时对学生进行思想教育，把心受到学校，全身心地投入到学习上，一如既往地搞好一日常规工作。2、根据学校对班级量化评比标准，结合班上实际情况，制定切实可行的班务制度。主要从思想，学习，纪律，卫生等几个方面，使每位学生明确班规要求，自觉遵守班规纪律。

3、根据上学期干部的表现，采用民主选举的办法，选出自己信赖的班委成员，然后明确分工，各负其职，并及时指导好班干部的工作。

4、班上开展比学，互助活动。采用人与人，组与组比赛，采用优包差互助学习，及时做好评比，使每位学生学有方向，赶有目标。

5、增强卫生意识，经常教育、要求他们，并做好卫生干部工作的指导，使同学们养成良好的卫生习惯。

6、培养学生良好的学习习惯。主要包括：读书习惯，坐姿习惯，作业习惯，书写习惯，听讲习惯。

7、协同科任教师搞好教学工作，及时了解各科教学的动态，做好学生的思想工作。

8、积极参加学校组织的各项活动，有为班集体争光添彩的意识。

五、活动安排 月份活 动 内 容备注9月开学典礼制定各种计划全校家长会安全教育养成教育推普宣传周

10月中青年教师课堂比武“双爱好”教育活动班主任工作培训安全演习

11月拔河比赛“左权英雄中队”社会实践活动安全演习

12月语文朗读、英语口语抽查教学评估迎接市教育局各项检查安全演习

小学三年级班主任德育工作计划范本(三）

时光如梭，在学校的各项工作都正常运转的情况下，学校更加注 重抓好学生们的德育工作。为全力配合学校完成各项工作，我做出以下关于新一学期德育的工作计划。 新的学期，在小学德育工作计划中重点提出的是给学生们进行心理健康教育和法制教育。针对这一指导，作为小学三年级班主任的我 带着一份责任心和爱心将领导学生们前行。

结合班级实际情况，为全面提高青少年的素质，作出如下小学三年级德育工作计划：

1.文明礼仪宣传教育：

着重对学生进行以“讲卫生、懂礼貌、守纪律、关心人”的文明礼仪等养成习惯进行教育。诵记《文明礼仪三 字歌》，通过小组背诵评比等形式进行。

2.爱国主义教育

(1) 对学生进行爱国主义教育和和谐观教育，了解中华悠久的 历史和名人，知道中国是多民族的国家及各民族的风俗习惯等，通过 班会、板报等形式开展活动。

(2) 对学生进行“讲诚信光荣、不讲诚信可耻”的教育，培养 学生诚实守信，勤学守纪的道德情操，通过演讲、诗朗诵等形式进行。

3. 民族团结教育：

(1)对学生们制定出法制教育工作计划，对学生进行法制教育， 内容有《新义务教育法》《未成年保护法》、《预防未成年犯罪法》，形 式有案例分析、故事解说等，提高学生法律意识，懂得如何守法。

(2)对学生进行艰苦朴素教育，将革命老前辈的光荣传统，新旧 社会的对比，让学生珍惜幸福生活，懂得勤俭节约。

4.安全，理想教育：

(1)对学生进行安全教育，主要内容有：在校内、校外及外出时应如何注意安全，形式有板报，讲解等。

(2)珍惜时间：畅行未来主题队会活动，培养学生珍惜时间，努力学习，共创美好未来的思想。

大学生学生会宣传部干事工作计划范本

【篇一】

一.工作宗旨

以"学校活动创造条件为活动发展提供服务"为宗旨积极与各兄弟院校建立良好的交流与合作关系:积极为学校解决经费问题;积极与外界联系为同学提供良好的勤工俭学的机会:如有条件与能力将联系相关机构为同学做学习与就业方面的讲座等.

二.工作计划大纲

1.12年开学后第一周内要大概了解清楚内部工作制定的初步计划做好协助工作的准备;

2.在协助好院内各工作外要积极配合部门进行有关常规工作.

(详细见)

3.积极寻找潜在商家为部门及院各项活动作筹备资金准备.

4.要努力改变现存的人际关系问题小说多干!

多交流多注意个人问题不回避缺点不保留有点.

5.做好部长分配下来的任务并敢于主动承担责任.

三.具体计划如下:

1.做好协调工作

做好院内协助的工作为自身及本部门的常规工作。

(1)协助学院的各个部门搞好各种工作，保障院内其他部门开展活动所需的场地，物品以及资金等需要。

(此项还需要根据学员的活动计划针对不同的活动作出更详细的内容安排。eg：大型晚会，社团大汇演，运动会等)

(2)在学院举行活动时要积极细心细致地做好联系，接待嘉宾的工作，以保障活动的顺利进行。

(其中的具体工作包括：联系嘉宾确定好到达的时间地点，派工作人员去接待，安排就座，后勤工作等，或者还有通知演出的相关事宜等相关工作)

(3)要加强与院内其他部门的联系和交流，从而在工作上更好的相互配合，共同为同学服务。

2.扩大影响

所谓扩大影响主要是通过加强与校内其他院校的联系以及发展友好关系通过与其他院校的联系交流把他们的特色引入我院把我院的工作推广到其他高校达到丰富广大同学的课余生活扩展同学的视野加强学院间高校间的联系交流目的从而展现我们学院的风采扩大我们学院的影响力.

(1)展现风采---在与各院进行见面交流会时抓住一切机会展现我院主要是通过加强活动的交流为主.争取在下个学期协助好本部与其他院校搞一次大的联谊活动内容倾向于外联经验的交流.

(具体内容及时间安排待定)

(2)扩大影响---主要是通过举办一些在校内.各院校内较有影响的活动来达到目的即争取努力策划更多活动加大宣传扩大影响力!

3.加强联系

这里的加强联系主要是指加强与学校内部各部门的联系以及学校以外的公司企业事业单位的联系.

(1)积极与同事们发挥团队精神寻求潜在的赞助商来支持和能与赞助学院的各种活动提供资金支持打出学院品牌树立我们学校在社会上的良好形象是很有帮助的.

(2)努力做好实践基地的初步工作建立完善的客户资料档案维持与客户的友好关系.三

4.常规工作

(1)3月份为学生会各社团协会开展活动的高峰期所以要积极配各部门开展工作融洽学校各组织各部门.

(2)2---3月份开展与外校交流工作筹备本部门已计划好的一切工作相关材料及方案.

四.后期展望

1.做好部长分配下来的任务并敢于主动承担责任.

2.不管任务或工作是否繁琐劳累都要认真对待完成.

3.齐心完成任务合理分工锻炼自身能力!不管工作是大事小事事事都不能懈怠.

4.不断地提高自身素质把工作做到更好!

5.学会工作中创造自我价值!

【篇二】

一：培养目标

1.让干事们尽快适应大学生活，让他们学会如何在大学里做人，做事。如何与人交流，学会协调工作与学习的关系。

2.提*事自身素养，提高他们的写作，拍照能力。

二：培养计划

1.做人方面要想先会做事，就要先学会如何做人。培训时间：2个月

(1)每周例会，抽取5分钟，每位干事从身边小事举例，进行讨论分析，范围：文明礼貌，尊重他人，有爱心，宽容，诚信，等优秀道德方面。

(2)给干事与老师，其他部门部长及干事创造交流机会，让他们从交流中，得到经验。

(3)提*事的交流能力，通过与其他部门一起聚餐，工作，扩充人脉资源。

(4)培养干事的独立自主能力，适时放手，让他们展示自己的想法。在方案策划中，向干事征集意见。不必事必躬亲，让他们每个人在做事中更有责任心。

(5)提高团队合作能力，初期让干事相互合作，在活动中报道摄影由2-4人合作完成，让他们在合作中，相互熟悉，共同进步。

2.自身素养培训时间：每周

(1)向干事介绍新闻的基本格式及要求。

(2)邀请老师和以前的部长进行文字方面的培训，提高写作能力。

(3)每人每周学习一篇新闻，给出自己看法，并给予评讲，好的地方要相互借鉴。

(4)继承宣传部的传统，每月一本书的计划。并按时上交读书笔记，由部长轮流负责检查。

(5)分专题向干事进行其它文书的培训，策划书，工作计划及总结的写作格式。

(6)鼓励干事学习必要的工作软件，学会基础的office应用。及iebook软件，ps等。(不做硬性规定)

(7)摄影技术的培训。除了每次例会进行本周总结外，每月进行一次拍照评比工作。

3.协调工作学习

(1)针对干时空课表平均分配工作，争取让每位干事都能够比较顺利完成工作的同时，不落下学习。

(2)建立部门的学习小组，进行学习规划，主要针对干事的英语级考。

4.针对性的培养

尽快了解每位干事的特长，在全面培养的基础上，做到有针对性的培养。发挥每一位干事的才能，让他们各有所长，将部门发展的更好。

没有完美的策划，只有更好的实施，在实践中进步，齐心协力，共同打造完美的宣传部。

【篇三】

1.加强部门自身建设

2.加强部门与其他部门及院宣传部的的交往

为加强部门自身建设，我们对工作提出以下几个设想：

1、进一步完善部门内部的规章制度，提高工作成员的工作积极性，提高工作质量，新的制度将在第一次例会中公布。

2、定期召开部门成员会议，例会自第二周开始，两周一次，总结阶段成果和不足，加强成员之间对工作经验和想法的交流。大家共同进步。

3、继续推选每月优秀干事，另将增加每周优秀干事，调动干事工作热情，每月优秀干事的推选将由大家投票产生。

4、细化部门的工作日志，详细记录每位干事在值班期间所做的工作事迹，并将添加部门的会议记录。

5、节约经费开支，为保证此项工作开展，将在部门部门工作日志上附上所写海报浪费的纸张数目及个人。并由其他值班人员及本人签名做证。此记录将作为优秀干事评选参考。

6、为培养下一届学生会成员，开始着重培养部分成员。

加强部门的交往，是为更好的起到宣传作用，协助其他部门工作的完成。主要设想如下：

1鼓励部门成员与其他部门成员交往，及时了解其他部门信息，把工作状态由原来的被动转为主动。

2设计安排各院优秀橱窗，宣传栏的评比。尽可能的美化校园的宣传环境，增强宣传部门的宣传力度。

由于我部门自身的弹性工作的制度，具体宣传活动和承办活动计划不做安排，但我部门都将以认真严谨的工作态度配合好学生会其他部门的工作，充分发挥作用，并将响应党的号召，积极宣传好党的相关政策及工作的开展。

新的一学年已经开始，校学生会的各项工作也已经紧锣密鼓的展开，作为新一届的宣传部部长，更是深感肩上责任之重。现将新一学年的工作任务和计划向领导和老师汇报如下，由于没有工作经验和工作能力欠缺，如有不足或错误之处，请领导和老师多多批评指正。

新学年的工作重点：

首先，海报的宣传是我们宣传部的主要阵地，也是同学们获得信息的重要渠道，其宣传的力量和效果不言而喻，往年的工作重点在今年仍然要保持，而且要比以往宣传的力度更大，范围要更广。

其次，我们要充分利用网络的便捷作好宣传，快速而又准确的信息传递使得网络宣传具有不可取代的地位。我们要建立起自己的网站，要成为安工大网页上的一道亮点。要把它建设成为海报以外的第二信息源。使宣传的效果化。

再次，广播站也是宣传中不可或缺的媒介，宣传部可以和广播站商量在广播站拥有自己的宣传时间，把宣传工作开展的更深入人心。让同学们了解宣传部，并支持宣传部。

最后，利用学院的宣传部作为校学生会宣传部和同学们之间的纽带，利用他们把我们的信息带给大众，把我们的工作开展的更彻底。使同学们能了解最新活动信息的同时，也通过他们把同学们的心声反馈给我们。做到上情下达，下情上达，使我们的宣传工作能更有目的性的开展。

新学年的工作计划：

1)学生会宣传部将在10月初完成对大一新生的招新工作，招新人数在15人左右，要求工作态度认真，办事努力负责，有一定的计算机文化基础知识，能进行简单的网上操作，并且会毛笔字书法绘画者优先招聘。其他招聘细则视具体情况而定。

2)在确定具体的宣传部干事名单后，将尽快排出值班表并分配工作任务，按照校宣传部干事工作条例对每一位干事都有具体的分工，让他们明确自己的定位和工作重心，负责海报宣传，负责网上宣传等等，都将详细分工到每一个人，确保所有的干事都能在宣传部得到锻炼。

3)为弘扬书法艺术情操，改善校园文化氛围，并为同学们提供一个展示自我的平台，我部计划于今年11月上旬举办书法作品大赛，明年4月上旬举办绘画作品大赛，活动面向全体同学征集内容积极健康向上的作品，并将邀请专家评定获奖者将给予一定的物质和精神奖励，优秀作品分别将于11中旬和4月中旬向广大同学展示。

4)校学生会宣传部要与各院宣传部联合起来，按照共同制定的院学生会宣传部条例要求自己，共同宣传，不但范围广，力度大，而且事半功倍。共同做好平时的宣传工作。

5)在工作过程中，要在培养干事能力的同时，着重培养一些有能力有才学的新人，作为学生会骨干力量的后备军，相信长江后浪推前浪，他们将会为学生会以后的发展注入新的生命力。

总之，我相信，只要校学生会宣传部能够上下同心，共同努力，在各部门的协助下，在老师的指导和帮助下，宣传部会越走越远，越走越好。

甲方____________________________

地址_____________________________

法定代表人(主要负责人)：__________________

乙方________________________________

身份证号码_____________________________

现住址__________________________________

联系电话_______________________________

为建立劳动关系，明确权利义务，依据中华人民共和国《劳动法》、《劳动合同法》，在平等自愿、协商一致的基础上，订立本合同。

第一条劳动合同期限

本合同期限自_________年________月__日起至_________年________月__日止。其中试用期为_________年________月__日起至_________年________月__日止。

第二条工作内容和工作地点

甲方根据工作需要，安排乙方在___________岗位，乙方的工作任务为_________________，工作地点为________。经双方协商同意，甲方可以调换乙方的工种或_______岗位。

第三条劳动报酬

乙方按甲方规定完成工作任务的，甲方每月________日支付工资，支付的劳动报酬为________元/月，其中试用期的劳动报酬为________元/月。

第四条劳动合同的终止与解除

双方解除或终止劳动合同应按法定程序办理，甲方为乙方出具终止、解除劳动合同的通知书或相关证明，符合国家规定的，支付乙方经济补偿。

第五条工作时间和休息休假、社会保险、劳动保护、劳动条件和职业危害防护等按照法律法规、规章等规定执行。

第六条其他未尽事项按国家及地方现行有关规定执行，或者通过协商以附件形式约定。

第七条本合同双方各执一份，涂改或未经授权代签无效。

甲方签字(盖章) ：_________乙方签字(盖章)：_________

签订时间：_________年 ______月______日

新版的公司与个人租车合同

随着市场经济的发展与科技不断地进步,企事业单位的各项管理也都朝着现代化方向在发展着,车辆租赁发挥的作用也在不断的增大，今天小编就给大家来看看车辆租赁合同，喜欢可以帮助大家

公司与个人租车协议参考

出租方：_______________________

承租方：_______________________

一、租赁车辆状况

详见本合同的附件《租赁车辆检验报告》

二、租赁期限及租金的交纳

详见本合同的附件《汽车自驾租赁登记表》和《汽车租赁结算单》

三、出租方的权利和义务

1、在下述任何一种情况发生时，出租方有权随时随地收回所租车辆，已收取的款项在计算所有损失后多退少补。

(1)承租方利用所租车辆从事违法犯罪活动。

(2)承租方将所租赁车辆转让、转租、出售、抵押、质押。

(3)从事其它有损出租方车辆合法权益的活动。

(4)未经出租方书面许可，在车辆租赁期限结束后拖欠还车。

在以上情况下给出租方造成经济损失的，承租方应作相应赔偿。

2、不承担租赁车辆于租赁期间引发的第三者责任。

3、其它的依照法律、法规的规定出租方应有的权利。

4、按合同约定提供技术状况良好各种证照及规费齐全的车辆。

5、租赁期间对车辆使用情况及客户信誉实施监控。

四、承租方的权利和义务

1、于租赁合同规定的租赁时段拥有所租赁车辆的使用权。

2、对租赁车辆承租前已有的损伤不承担赔偿、维修义务。

3、在租赁合同书签署之日足额交纳抵押金并以现金方式全额缴纳租金;如使用银行信用卡消费，则需自行承担由此而产生的应支付给银行的手续费。

4、自行承担租赁期内所租车辆的燃油费用。

5、遵守《汽车承租人须知》的义务。

6、租期内应严格遵守国家各项法律法规，并承担由于违章、违法肇事等行为所产生的全部责任及经济损失。

7、承租方必须承担由于承租方行为带来的其他经济损失。

8、协助出租方在租赁期内办理车辆保险事故的定损、理赔。

五、抵押条款

1、承租方应于租赁合同书签署之日根据出租方关于押金的规定一次性足额交付相应抵押金给出租方。

2、出租方应于租赁合同书期满或双方协议解除合同后，除依照本合同及附件的规定应扣除的费用外，将剩余押金归还给承租方。

3、承租方不可自行将押金抵作租金。

4、如由出租方提供驾驶人员，承租方不用交纳押金。

六、保险条款

1、出租方已就租赁车辆提供相应保险，详见《汽车租赁登记表》。

2、承租方应在交通事故发生的24小时内通知出租方，出租方将在保险事故车辆到达其指定修理厂，承租方提供了有效的全部保险证明手续，且承租车辆符合《汽车租赁登记表》中规定的由出租方进行保险理赔的车辆时，停止计算租赁费用。承租人在承租车辆期间若发生车辆被盗、报废或其它形式的灭失，承租人应负担车辆灭失之日起至出租方获得保险公司赔款时止(最长不超过____个月)的车辆租金的____%及保险免赔部分。

3、由于承租方的原因造成的保险公司拒赔及免赔的所有损失及相关费用由承租人承担。

4、车辆发生保险事故，承租方应交付车辆加速折旧费及保险公司免赔额。加速折旧费相当于本次事故总维修费的____%，如承租方不能取得保险公司理赔必须的有关手续，则由承租方负担全部维修费用及加速折旧费，并承担保险事件不能赔付的责任。

七、违约责任

除重大政策性变化或不可抗力外，任何一方违反合同的规定致使合同不能全部履行的，除赔偿相应经济损失外，还应向另一方支付合同及附件未履行部分租赁金额总____%的违约金。承租方应按双方签定的还车时间及时交还租赁车辆，每逾期交还一日，除继续计收租金外，需另外交付日租金____%的违约金。每提前交还一日，在交付日租金____%的违约金后退还该日租金。

本合同所指经济损失，均包括租金损失，租金损失赔偿标准按《汽车租赁登记表》所列租金标准计算。

八、合同的变更和解除

本合同的变更和解除，必须经租赁双方签署书面协议方能有效。

九、争议的解决

有关本合同之一切争议，首先应友好协商解决，如协商解决不成，任何一方可向有管辖权的___________市工商行政管理局仲裁委员会申请仲裁或由_____________市____________区人民法院诉讼解决。

十、合同及附件

《汽车承租人须知》、《汽车自驾租赁登记表》、《租赁车辆检验报告》、《汽车租赁结算单》及《补充协议》是本合同的附件，与本合同具有同等法律效力。

十一、本合同自租赁双方签字盖章后即生效

本合同一式二份，由出租方、承租方各执一份。

出租方：____________________

承租方：____________________

盖章：______________________

代表：______________________

日期：______________________

公司向个人租车协议

承租方(甲方)：_________

出租方(乙方)：_________

兹有甲方因施工需要租用乙方吊车，为明确责任和义务，经双方友好协商，特立本合同，共同遵守执行。

一、吊车类型及数量：_________;施工地点：_________;施工内容：_________;使用时间：_________年_________月_________日至_________年_________月_________日。

二、租赁金和付款方式：

出租金：_________;合同总价：_________元整。

1.吨吊车工作台班单价_________元/台班，闲置台班单价_________元/台班;

2.每日以一个台班起算;

3.每个台班为8小时，以驾驶员进出场时间为准。超过部分租金=累计超过作业时间/8小时×台班费。(以外出施工记录表为准)

4.吊车进场及退场经协商由按吊车的台班×2=台班支付费用。

5.对于价值超过_________元设备的吊装，吊车台班单价_________元。

付款方式：在合同签订后一次付清，或乙方吊车到现场时，预付人民币_________元，余款在吊车退场前结清。

三、安全责任：

1.施工时应严格按照安全技术操作规程执行。甲乙双方均有权阻止对方的违章操作、违章指挥，坚持实施吊车作业_________原则。甲方需配备合格的起重指挥，现场的安全管理由甲方负责。

2.由于对施工场地地面和地下设施情况申报不清而造成的事故，其责任和损失由甲方负责。

3.吊装作业前，负责向乙方吊车司机进行交底。严禁干超出作业方案以外的工程，指派专人指挥作业，双方统一信号确保作业，施工过程中若发生野蛮作业，乙方吊车机组人员有权拒绝作业。由于指挥失误或因安全措施未落实而造成的事故，其责任和损失由甲方负责。

4.施工中若发生安全事故时，责任划分原则为;吊钩以上属于吊车机械设备由乙方负责;吊钩以下(钢丝绳、吊耳、卸扣、捆扎、指挥等原因)由甲方负责。

四、甲方的权利和义务

1.必须确保这次施工_________个台班，若实际台班超过_________个，按实际发生结算。

2.在出租期间内对出租吊车具有使用权，但无所有权。不得转让、转租、变卖或抵押乙方的设备，不得擅自转移作业地点，不得自行操作乙方吊车，如果因此发生事故或造成损失由承担全部责任。

3.按时支付出租费用。逾期支付赔偿金(赔偿金=合同额×0.5%/天)，承担违约责任。

4.吊车在工地上停置时，由甲方负责保管，如果由于保管不严而造成的损坏，其损失由甲方负责。

5.必须杜绝故意损坏或伤害乙方作业人员和设备的一切不良行为。

6.起重工(具有合格操作证)、钢丝绳、枕木由甲方提供。

7.甲方无偿提供机组人员的住宿和就餐。

五、乙方的权利和义务

1.吊车操作人员必须服从工地领导的指挥，并遵守的有关规章制度。

个人租车协议模板阅读

甲方：___________________________

乙方：_________ 身份证号码：___________________________

根据《中华人民共和国合同法》等法律规定的有关规定，双方在平等自愿的基础上，经充分协商就汽车租赁事宜达成如下协议，供双方共同恪守：

一、车辆及驾驶员

甲方租用乙方的车型为__________________：，车牌号：__________________，乙方为该车辆驾驶人。

二、租赁期限及租金

租期为______个月，到期后如甲方需续租，该协议条款可继续有效。

租金每天_________元(含驾驶员报酬)，凭正规票据按季度支付，先租用后支付。

若租期满一年甲方仍需租用，租期、租金双方另行商定。

三、 甲方的权利和义务

1、甲方承担车辆租赁期内的油费、过路费和停车费。

保险和维修等费用由乙方承担。

2、甲方不承担租赁车辆在租赁期间内所发生交通事故或其他事故造成的一切责任，包括有关部门的罚款等。

3、甲方不承担租赁车辆在租赁期间引发的第三者责任。

4、甲方依照法律、法规的规定应享有的权利。

四、 乙方的权利和义务

1、租赁期间车辆的使用权归甲方。

2、乙方在租赁期间应严格遵守国家各项法律法规，并承担由于违章、肇事、违法等行为所产生的全部责任及经济损失。

3、车辆在租赁期内正常使用时应处于良好的状态，保持车容整洁。

需保养维修或临时他用时，应通知甲方并征得同意后方可。

4、乙方在租赁期内服从甲方管理，车辆每天使用时间由甲方确定。

5、车辆在租赁期内不得将车辆交给其他人员驾驶，发现一次，扣除一个月的租金

6、车辆在租赁期内需有乘座人员保险，如没有保险，乘座人员发生伤亡，乙方承担全部赔偿责任。

五、其它

1、因车辆状况原因或不服从甲方管理，甲方有权解除合同。

2、有关合同的争议，双方经协商解决未能达到一致的，任何一方可向法院提出起诉。

3、本协议从甲乙双方签字之日起生效。

4、本协议甲乙双方各执一份。

甲方：___________________________(签字)

乙方：___________________________(签字)

_______年_______月_______日

土地承包转让合同范本

六、用途：

乙方转让土地后有权自主经营，从事农业、林业、养殖业、修建临时房屋、圈舍等，甲方不得干涉，如果要建房，乙方必须办理相关手续，甲方给予积极配合。

七、特别约定：

本合同生效后，由该土地所产生的一切权利、义务都由乙方承担和享有。涉及村、镇、企业、国家等对该土地进行征用、征收、拆迁等，所给付的土地及地上附着物的补偿均归乙方所有，与甲方无任何关系。

八、违约责任：

本合同是甲、乙双方的真实意思表示，应当严守恪行。如果违约，违约方给付守约方违约金人民币壹拾万元，如果违约金不足以弥补损失时还应当赔偿损失。

九、本合同双方代表签字生效，一式三份，甲乙双方各执一份，村委会备案一致，具备法律效力。

十、本合同未尽事宜，双方另行协商。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

土地承包转让合同范文3

转让方(甲方)：

受让方(乙方)：

依据《中华人民共和国土地承包法》、《内蒙古自治区实施办法》、《中华人民共和国合同法》等有关法律、法规和国家有关政策的规定，本着自愿、平等、有偿的原则，甲乙双方就农村土地承包经营权转让事宜经协商一致，订立本合同。

一、转让标的

甲方将座落于 等地的 亩承包土地转让给乙方从事(主营项目) 生产经营。

转让土地的状况及用途：

二、转让期限

转让期限为 年(最长不超过甲方原承包的剩余年限)，即自 年 月 日起至 年 月 日止。

三、转让价款

转让土地的价款每亩每年 元，共 亩，每年共 元，总价款为 元人民币。

甲方承包经营相关地块时对该地块实际投入资金和人力改造的，可收取合理的补偿金。本合同的补偿金为 元(没有补偿金时可填写为零元)

四、付款方式和时间

乙方选择下述第 种方式和时间支付转让金和补偿金，并按该方式所定时间，如期足额将转让款支付给甲方。

(一)一次性付款方式：(选择 1、2)

1、签订本合同时， 年 月 日前，支付全部土地转让款，计人民币 元，大写 元;

2、签订本合同时， 年 月 日前，以自有 (农产品) 公斤，折价人民币 元，大写 一次性支付全部土地转让款。

(二)分期付款方式：(选择 1、2)

1、签订本合同时， 年 月 日前支付土地转让款，计人民币 元，大写 元，之后于 年 月 日前付清转让款，计人民币 元，大写 元。

2、签订本合同时， 年 月 日前，以自有 (农产品) 公斤，折价人民币 元，大写 一次性支付全部土地转让款。

五、转让土地的交付时间

甲方应于 年 月 日前将转让土地交付乙方。

六、双方的权利和义务

1、甲方转让土地承包经营权必须经发包方同意。

2、转让合同生效后甲方终止与发包方的承包关系，变更、注销土地承包经营权证书。

3、甲方交付的承包经营土地必须符合双方约定的标准。

4、乙方必须与发包方签订新的土地承包经营合同，经依法登记获得土地承包经营权证书。

5、乙方获得土地承包经营权后，依法享有该土地的使用、收益、经营决策和产品处臵权。

6、乙方必须承担甲方与发包方签订的承包合同所约定的义务及国家政策规定的其他义务。

7、乙方在受让期间有权享受各级政府扶持农业的优惠政策。

8、乙方在受让期间土地被依法征收、征用、占用时，有权依法取得补偿的权利。

9、乙方必须依法保护和合理利用土地，不得掠夺性经营，不得给土地造成永久性损害，并负责保护好承包土地上的林木、排灌设施等国家和集体财产。

10、乙方不得改变土地的农业用途，不得用于非农建设、不得抛荒。

11、其他：

七、违约责任

1、甲乙双方在合同生效后应本着诚信的原则严格履行合同义务。如一方当事人无正当理由单方解除合同的，应向另一方当事人支付违约金。违约金的数额为 。

2、如果违约金尚不足以弥补守约方经济损失时，违约方应在违约金之外增加支付赔偿金。赔偿金的数额依具体损失情况，由甲、乙双方协商。

3、因不可抗力不能履行合同时，一方当事人应及时向发包方通报不能履行或不能完全履行的理由，并应在 日内提供证明。根据情况可部分或者全部免除责任，但法律另有规定的除外。

八、解决争议途径

甲、乙双方在履行本合同过程中发生争议，双方应协商解决，协商不成的由村、镇调解部门或工商部门调解解决，调解不成的，按下列第 种方式解决：

1、提交 仲裁委员会仲裁;

2、依法向人民法院提起诉讼。

九、生效条件

本合同自双方签字或盖章之日起生效。

十、其他约定

1、本合同未尽事宜，可经双方协商一致签订补充协议。补充协议与本合同具有同等效力。

2、本合同一式四份，由甲乙双方、发包方及上级农村土地承包主管部门各执一份。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

共2页，当前第2页12

最新水泥建材购销合同

水泥建材购销合同范本

购货方:(以下简称为甲方)

供货方:(以下简称为乙方)

一、产品名称:

二、数量:

三、价格: (含税价)。发票要根据甲方的要求开具(如页岩砖等),并提供出厂合格证和检验报告。

四、验收标准:甲方会同相关技术管理人员,仓管员,按合同相关规定验收,如乙方所送货物质量、数量、规格不符国家标准和甲方要求,甲方有权按实际情况签收或退货,由此产生的相关费用由乙方承担。

五、乙方承当运输、装车、卸车费用,并由施工工地相关人员指定堆放。

六、付款方式:

七、交货地点:

八、交货日期:乙方必须按质按量及时供应,并确保在 日之内送达施工现场,如因乙方供货原因造成停工待料的,由此产生的相关费用有乙方承当。

九、违约责任:甲乙双方均应严格按照本合同的相关条款执行,如甲乙双方遇到未尽事宜,双方另行协商解决,结果与本合同具有同等效力,如协商不成按《经济合同法》到甲方所在地人民法院解决。

十、本合同一式两份,甲乙双方各持一份。本合同自签订后当日生效。

甲 方:(签章) 乙 方:(签章)

签字代表: 签字代表:

日 期: 日 期:

最新水泥建材购销合同

甲方(购方)：____________________________________________

地址：____________ 邮码：____________ 电话：____________

法定代表人：____________ 职务：_________________________

乙方(销方)：____________________________________________

地址：____________ 邮码：____________ 电话：____________

法定代表人：____________ 职务：_________________________

经双方协定一致，签订水泥购销合同条款如下：

一、数量、计量单位、单价、金额

品 名

规格

单位

数量

单价(元)

金额(元)

备

价金总额(大写) 拾 万 仟 佰 拾 元 角 分 ￥

二、质量标准：水泥标号执行国家规定标准。由乙方按批向甲方交送水泥出厂质量通知单。甲方凭单验质。

三、袋重合格率达到国家规范。

四、交货方式、地点和运杂费负担：甲方组织运输工具到乙方仓库提货，运费、上、下车费等均由甲方自理，乙方凭合同和甲方收货人出据的证明发货。若遇便车，乙方可以代运，其代运费用概由甲方负担。乙方垫付的款项，随同水泥价款一并结算。

五、甲乙双方必须按如下期限提(供)货：

____年____月____日前提(供)________吨。其中：______吨，______吨。

____年____月____日前提(供)________吨。其中：______吨，______吨。

____年____月____日前提(供)________吨。其中：______吨，______吨。

____年____月____日前提(供)________吨。其中：______吨，______吨。

甲方逾期提(收)货的。乙方有权处理该货，并不免除甲方责任。

六、付款办法和期限：

1.甲方在____年____月____日前付定金________元;

2.采取先汇款后结算方式：甲方按购水泥总金额分期先汇款。

____年____月____日前电汇________元;____年____月____日前电汇________元;

____年____月____日前电汇________元;____年____月____日前电汇________元。

3.采取托收承付方式：按《中国人民银行结算办法》第八条第一、二、三、五、六、七、八项规定执行。乙方每月____日～____日凭实发水泥开具销售发票向甲方开户银行办理托收。

七、违约责任：

甲方责任：

1.中途退货或违约拒收的，偿付退(或拒收)货部分货款总值____%的违约金。逾期提货的，每天偿付逾期提货部分货款总值____%的违约金，并承担乙方实际支付的代管费用。

2.逾期付款的。每天偿付逾期付款总额____ %的违约金。

乙方责任：

1.不能交货的，偿付不能交货部分货款总值5%的违约金;逾期交货的，按逾期交货部分货款总值计算，每天偿付____ %的违约金。

2.所交水泥质量、规格不符合同规定，除自费负责处理外，还要赔偿实际经济损失。

八、本合同一式____份。经法定代表人签字后生效。有效期自____年____月____日起至____年____月____日止。

甲方：________________________ 代 表 人：____________________

开户银行：____________________ 帐号：________________________

____年__月__日

乙方：________________________ 代 表 人：____________________

开户银行：____________________ 帐号：________________________

____年__月__日

甲方：

乙方：

鉴于：甲方在___ 市__ 路__号购买住宅(期房)___ (项目名称)一套房屋，具体房号为： 栋 单元 号房。该房目前尚未建成，未具备交易条件。

甲、乙双方就该房转让事项经过协商，一致同意订立协议条款如下，以资共同遵守。

一、 甲方愿将以其名义购买的住宅___ 市__ 路__号___ (项目名称) 栋 单元 号房(以下简称该房) 转让给乙方。

二、 该房售价为每平方米 元，总价款为 元。

三、 该房屋双方议定由甲方转让给乙方，乙方支付该房的首付人民币 万元(￥ )，在签定协议后的两天内支付甲方转让费人民币 万元(￥ )中的万元，其余款项待更改名字后当日付清。

四、该房的购房款全部由乙方支付，以甲方名义直接付给开发商，由乙方收执收款凭证。

五、该房盖到二层交全额的时候后，甲方必须协助乙方办理更名手续。

六、 本协议签订后，该房屋如有应缴纳的一切税、费，概由乙方负责。本协议发生的过户登记费、契税、估价费、印花税由乙方负担。

八、 甲方如不按协议规定将该房屋过户给乙方，乙方有权按以下第 种方式要求甲方承担责任：

1、乙方不能取得该房所有权，甲方必须将该房拍卖，拍卖所得的款项，优先支付乙方支付给开发商购房款和给甲方的 万元转让费后，余款作为甲方给乙方的赔偿金。甲方不能从该房获得任何收益。

九、 乙方不能按期支付购房款的，乙方自行承担责任。

十、 甲方保证其转让给乙方的房屋，产权清楚，绝无其他项权利设定或其他纠纷。乙方得到该房后，如该房屋产权有纠葛，致影响乙方权利的行使，概由甲方负责清理，并赔偿乙方损失。

十一、 交屋时，乙方发现房屋构造或设备不符合交付要求，经鉴定属实，甲方应于1个月内予以修理，如逾期不修理，乙方得自行修理，费用由甲方承担。如修理仍达不到协议约定的要求，乙方得解除协议，解约时，甲方除返还全部房价款后，并按本协议第八条规定承担违约责任。

十二、 房屋所占用的土地(包括庭院围墙等)所有权属于国家。乙方取得上开房屋占有相应比例的土地使用权，并依照国家法律的规定缴纳土地使用权及其他有关费用。

十三、 本协议的附件与协议有同等效力。

十四、 本协议一式 份，甲乙方各执 份。

十五、本协议甲乙双方签字生效。

甲方(公章)：_________ 乙方(公章)：_________

法定代表人(签字)：_________ 法定代表人(签字)：_________

_________年____月____日 _________年____月____日

技术出口合同范本

Contract for Equipment Sales and Technology Licensing

Contract No. ____________________

This Contract (hereinafter referred to as the “Contract”) is made and entered into as of ________ (the date of signature ) in ________ (the place of signature) through friendly negotiation by and between _____________, a company incorporated and existing under the laws of ____________ with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________ (hereinafter referred to as the “Buyer”), and ____________________, a company incorporated and existing under the laws of the People’s Republic of China with its registered address at ­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­_________________________________, and with its principal place of business at _________________________________(hereinafter referred to as the “Seller”).

Whereas, the Buyer desires to engage the Seller to provide the Equipment, related design, Technical Documentation, Technical Service and Technical Training and to obtain from the Seller a license of Patent and/or Know-how in relation to the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products. Now it is hereby mutually agreed as follows:

Article 1 Definitions

1.1 “Acceptance ”means the Buyer accepted the Equipment in accordance with Article 11.5.

1.2 “Commissioning” means the operation of the Equipment in accordance with Article 11.4 for the purpose of carrying out Performance Test.

1.3 “Contract” means this Contract signed by and between the Buyer and the Seller, including Appendices attached which shall form an integral part of this Contract.

1.4 “Contract Products” refers to all types of the products manufactured with Patent and/or Know-how under the Contract, details of which are specified in Appendix 1.

1.5 “Destination Airport” refers to _____________Airport.

1.6 “Effective Date of the Contract” means the date when the Contract enters into force upon fulfillment of all the conditions stated in Article 18.1.

1.7 “Equipment” means the equipment, machinery, instruments, spare parts and materials supplied by the Seller as listed in Appendix 3.

1.8 “Erection” means placing the Equipment to the positions according to the design drawings, and connecting it with relevant equipment and utilities.

1.9 “Improvement” refers to new findings and/or modifications made in the validity period of the Contract by either party on Patent and/or Know-how in the form of new designs, formulas, recipes, ingredients, indices, parameters, calculations, or any other indicators.

1.10 “Job Site” means the site where the Equipment shall be located and/or erected, namely ____.

1.11 “Know-how” refers to any valuable technical knowledge, data, indices, drawings, designs and other technical information, concerning the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment as well as manufacture of the Contract Products, developed and owned or legally acquired and possessed by the Seller and disclosed to the Buyer by the Seller, which is unknown to either public or the Buyer before the Date of Effectiveness of this Contract, and for which appropriate protection measures have been taken by the Seller for keeping Know-how in secrecy. The specific description of Know-how is set forth in Appendix 3.

1.12 “Last Shipment” means the shipment with which the accumulated invoice value of shipped goods has reached ____ ( ) percent of the total Equipment price.

1.13 “Patent” refers to any and all of the effective patent rights possessed by the Seller and licensed to the Buyer under the Contract in connection with the Erection, Test Run, Commissioning, Performance Test,operation and maintenance for the Equipment, as well as manufacture of the Contract Products, the No. and list of which are set forth in Appendix 3.

1.14 “Performance Test” means the tests for examining whether the Equipment is able to meet guarantee figures specified in Appendix 1.

1.15 “Technical Documentation” means the technical indices and data, specifications, drawings, processes, technical and quality standards, and other documents carrying the descriptions and explanations of Patent, Know-how and other technical information, in connection with the Erection, Test Run, Commissioning, Performance Test，operation and maintenance for the Equipment, as well as manufacture of the Contract Products, to be provided by the Seller as listed in Appendix 4.

1.16 “Technical Service” means the technical instruction, assistance and guidance rendered by the Seller as per Appendix 6.

1.17 “Technical Training ” means the training rendered by the Seller as per Appendix 7.

1.18 “Test Run” means the initial run of a single machine or the whole system of the Equipment without materials.

1.19 “Warranty Period” means the period of the warranty given by the Seller as specified in Article 12.2, during which the Seller is responsible for the defects of the Equipment as per Article 12.

Article 2 Scope of the Contract

2.1 The Seller’s Obligation

2.1.1 The Seller shall supply the Equipment, provide the design, Technical Documentation, and conduct the Technical Service and Technical Training, and grant the Buyer a right to use the Patent and/or Know-how as set forth in the Contract.

2.1.2 The Seller shall supply the Equipment which is listed in Appendix 3, the specification is detailed in Appendix 1.

2.1.3 The Seller shall provide design in accordance with Appendix 5, and submit to the Buyer the Technical Documentation listed in Appendix 4.

2.1.4 The Seller shall conduct the Technical Services at the Job Site as per Appendix 6.

2.1.5 The Seller shall conduct the Technical Training as per Appendix 7.

2.2 The Buyer’s Obligation

2.2.1 The Buyer shall at his own costs and expenses, provide the Seller with all information and data concerning the design as per Appendix 2. The Buyer shall ensure the completeness, correctness and accuracy of all such information and data.

2.2.2 The Buyer shall at his own costs and expenses, obtain all necessary import permits, undertake customs clearance, take delivery of the Equipment to be supplied by the Seller and transport them to the Job Site in time.

2.2.3 The Buyer shall at his own costs and expenses, perform all the civil works, construction, Erection, Test Run， Commissioning and Performance Test in accordance with the Technical Documentation under the Technical Services rendered by the Seller as per Appendix 6.

2.2.4 The Buyer shall at his own costs and expenses, supply all the equipments, spare parts and facilities required, except for the Equipment supplied by the Seller as per Appendix 3.

2.2.5 The Buyer shall at his own costs and expenses, provide the qualified and appropriate technical personnel, labor, tools, utilities and the Job Site in time for Erection, Test Run, Commissioning, and Performance Test as specified in Appendix 2.

2.2.6 The Buyer shall at his own costs and expenses, perform necessary administration and security guard at the Job Site.

Article 3 Grant of License

3.1 The Seller agrees to grant to the Buyer and the Buyer agrees to obtain from the Seller a license to manufacture the Contract Products as well as to conduct Erection, Test Run, Commissioning, Performance Test, operation and maintenance for the Equipment with Patent and/or Know-how as well as to use and sell the Contract Products. The name, model, specification, and technical data of the Contract Products are detailed in Appendix 1. The Buyer shall not make use of Patent and/or Know-how for any purposes other than those stipulated in the Contract without prior written approval from the Seller. The annual output of the Contract Products manufactured by the Buyer shall in no case exceed _______________.

3.2 (Option 1) The license granted under the Contract shall be an exclusive license. The Seller shall not retain its right to grant the licenses to any third parties, or to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

(Option 2) The license granted under the Contract shall be a non-exclusive license. The Seller shall retain its right to grant the licenses to any third parties, and to explore Patent and/or Know-how as well as to sell the Contract Products by itself within the territory specified in Article 3.4.

3.3 The license granted under the Contract shall be a non-transferable and non-sublicensing license, under which the Buyer shall neither be entitled to transfer nor grant sub-license to any third party without prior written approval from the Seller.

3.4 Territory

3.4.1 The Seller agrees to grant the license to the Buyer only within the territory of _________________ (country or region). The Buyer shall not explore Patent and/or Know-how in any place other than the Job Site without previous written consent of the Seller.

3.4.2 The Seller agrees to grant a license to the Buyer to use and sell the Contract Products only within the territory of ________________________ (Country or region). In case the Buyer fails to perform its obligations under this Clause, all the actual losses and damages thus incurred to the Seller shall be borne by the Buyer, and the Seller shall have the right to terminate the Contract without prejudice to any remedies specified in the Contract.

Article 4 Price

4.1 The Buyer agrees to pay the total Contract price, Technical Training and Technical Service fee to the Seller.

4.2 The total Contract price, including price of the Equipment, design, Technical Documentation and a license fee in a fixed amount, shall be __________(say _______________________ only).

The breakdown price is as follows:

The price for Equipment is __________(say _______________________ only).

Fee for design is __________(say _______________________ only).

Fee for Technical Documentations is __________(say _______________________ only).

License fee is __________________(Say: _________________ only)

4.2.1 The total Contract price for the Equipment is for delivery CIF_____ Port, and the Technical Documentations is for delivery CIP (by air) ______ Airport. CIF and CIP term shall be interpreted in accordance with INCOTERMS 2019, issued by the INTERNATIONAL CHAMBER OF COMMERCE (ICC).

4.2.2 The total Contract price includes the price for spare parts listed in Appendix 3. However, the total Contract price does not cover the supply of any other spare parts. At the Buyer’s request, the Seller may provide with any other spare parts. A separate agreement shall be signed between the parties.

4.2.3 The above price is fixed and firm.

4.3 The total Contract price does not cover the Technical Service fee and Technical Training fee specified in Appendix 6,7.

4.4 The total Contract price as well as the Technical Training and Technical Service fee shall not be regarded or in any way be explained or interpreted as covering any of the custom duties, taxes, or charges, fees, and expenses unless expressly listed in the Contract.

Article 5 Payment

5.1 Down Payment

Within ____ ( ) days after signing the Contract, the Buyer shall pay ____ ( ) percent of the total Contract price amounting ____ by T/T to the Seller.

5.2 [Option One: Payment by Sight L/C]

The balance of the total Contract price amounting ___ ( says ___ only ) shall be paid by an irrevocable Letter of Credit at sight, issued within ___ ( ) days after signing the Contract by a reputable bank in ___ acceptable to the Seller in favor of the Seller. The Letter of Credit shall be available upon the presentation of the following documents till ______(specific expiration date or a specific circumstance for the expiration of the Letter of Credit).

5.2.1 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) Bill of Lading in one (1) original and ___ ( ) copies;

(b) Commercial Invoice in one (1) original and ___ ( ) copies;

(c) Packing list in one (1) original and ___ ( ) copies;

(d) Certificate of Origin in one (1) original and ___ ( ) copies;

(e) Insurance Policy in one (1) original and ___ ( ) copies;

5.2.2 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

(a) One (1) copy of the Acceptance Certificate signed by the Buyer as per Article 11.5, or the Seller’s written statement specifying the lapse of more than seven (7) days after the Seller’s notice requesting the Buyer to issue the Acceptance Certificate in accordance with Article 11.5;

(b)One ( 1 ) copy of commercial invoice.

5.2.3 ____ ( ) percent of the total Contract price amounting ____ (say ___ only) shall be paid by the Buyer to the Seller within _______ days after the following documents have been submitted by the Seller:

a) One (1) original Letter of Retention Guarantee in the form of Appendix 10;

b) One (1) copy of Commercial Invoice.

5.2 [Option Two: Payment under a L/G]

The balance of the total Contract price amounting ___ (say ___ only ), plus interest for deferred payment in the amount of ___ (say ___ only ), totaling ___ (say ___ only ) as detailed in Appendix 12 shall be paid by the Buyer by installments as specified in Appendix 12 and backed by an irrevocable Letter of Guarantee in favor of the Seller as per the Appendix 11, issued within ___ ( ) days after signing the Contract by the reputable bank in ____ acceptable to the Seller.

5.3 All the banking charges incurred in the Seller’s bank shall be borne by the Seller while those incurred outside the Seller’s bank shall be borne by the Buyer.

Article 6 Delivery of Equipment and Technical Documentation

6.1 The Delivery of the Equipment

6.1.1 The delivery of the Equipment listed in Appendix 3 shall be completed within ____ ( ) months from the Effective Date of the Contract.

6.1.2 Within ____ ( ) months after the Effective Date of the Contract, the Seller shall send to the Buyer a preliminary delivery schedule by fax.

Not later than ____ ( ) days before the first shipment, the Seller shall submit to the Buyer the final delivery schedule in three (3) copies indicating Contract number, dispatch number, name of the Equipment, quantity, approximate dimensions, volume of each package and time of each shipment.

6.1.3 The port of shipment is ____, while the port of destination is ____.

6.1.4 Advance shipment, partial shipment and transshipment are allowed, however, the Seller shall inform the Buyer thirty (30) days before such shipment.

6.1.5 The date of Bill of Lading for each shipment shall be considered as the actual delivery date.

6.1.6 The Seller shall notify the Buyer by fax of the following within five (5) working days after each shipment is effected:

(a) Contract number

(b) Name of the vessel and loading port

(c) Name of the Equipment shipped

(d) Number and date of Bill of Lading

(e) Total volume

(f) Total gross and net weight

(g) Total number of packages/cases

6.1.7 The Seller shall airmail the following documents in duplicate to the Buyer:

(a) Bill of Lading

(b) Commercial Invoice

(c) Packing List

(d) Certificate of Origin

(e) Insurance Policy.

6.2 The Late Delivery of the Equipment

6.2.1 If the Seller fails to deliver the Equipment in accordance with the final delivery schedule, the Seller shall pay to the Buyer liquidated damages for such delay at the following rates:

(a) From the first week to the fourth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per

week

(b) From the fifth week to the eighth week, the liquidated damages shall be

____ ( ) percent of the value of the delayed portion of the Equipment per week

(c) From the ninth week, the liquidated damages shall be ____ ( ) percent of

the value of the delayed portion of the Equipment per week

6.2.2 The fractions of four days or more shall be counted as one week and fractions of less than four days shall be omitted. The total aggregate amount of the liquidated damages shall not exceed ____ ( ) percent of the value of the delayed portion Equipment.

6.2.3 The Seller shall be released from the liability to the Buyer whatsoever in respect of the late delivery after his payment of liquidated damages in accordance with Article 6.2. Notwithstanding the Seller’s payment of the liquidated damages for the late delivery Equipment, the Seller shall not be released from his obligation to deliver the Equipment.

6.3 The Delivery of the Technical Documentation

6.3.1 The Technical Documentation listed in Appendix 4 shall be delivered CIP ____airport by air within ____ ( ) months after the Effective Date of the Contract.

6.3.2 The date of airway bill shall be regarded as the actual delivery date of the Technical Documentation.

6.3.3 Within ____ ( ) working days after sending each lot of the Technical Documentation, the Seller shall inform the Buyer of the Contract number, item number, number and date of airway bill and the flight.

6.3.4 In case of shortage, loss of or damage to the Technical Documentation due to the Seller’s reason, the Seller shall make supplement to the Buyer within ____ ( ) days after receiving the Buyer’s written notification without any further charge.

Article 7 Packing and Marking

7.1 The Equipment shall be packed to withstand long distance transportation, multiple handling.

7.2 The Seller shall mark the following on two opposite sides of each package with indelible painted English words:

(a) Destination

(b) Consignee

(c) Contract number

(d) Shipping mark

(e) Gross/net weight (kg)

(f) Case/ bale number

(g) Dimensions: L x W x H (cm)

7.3 Each package shall contain one (1) copy of packing list.

7.4 The Seller shall mark on the package, if necessary, “Handle with Care", “Right Side Up", “Fragile" or other indicative marks according to the characteristics and feature of the goods as well as different requirement for transportation, loading and unloading of the goods.

7.5 If the goods weigh three (3) or more than three (3) metric tons, gravity, hoisting position and illustrative marks shall be marked so as to facilitate loading, unloading and handing.

(a) Destination

(b) Consignee

(c) Contract number

(d) Gross/net weight (kg)

(e) Item number

(f) Dimensions: L x W x H (cm)

Article 8 Technical Service and Technical Training

8.1 The Seller shall dispatch technical personnel to Job Site to render Technical Service in accordance with Contract according to a time schedule agreed upon between both parties. The number, specialty, rank, treatment of the personnel, and payment as well as the contents, and requirements of Technical Service are specified in Appendix 6.

8.2 The Buyer shall have the right to send its technical personnel to the relevant factory selected by the Seller for training. The number, speciality, treatment of the personnel, and payment as well as the contents, time schedule, and requirement of training, are specified in Appendix 7.

8.3 Either party shall provide assistance to the other party’s technical personnel in their application for visa, working permit, and/or other necessary formalities for rendering Technical Service or training under the Contract in the other party’s factory.

8.4 Either Party’s technical personnel shall abide by the laws of the other party’s country and the regulations of the other party during their stay in the other party’s country.

Article 9 Standards and Inspection

9.1 The Seller shall carry out the design, manufacture, inspection and test of the Equipment according to the existing standards of the People’s Republic of China, namely GB.

9.2 The Seller or the manufacturer shall, at his own costs and expenses, inspect the Equipment and issue the ex-work quality certificate.

9.3 The open-case inspection of the Equipment shall be performed by the Buyer in the presence of the Seller’s representatives on the Job Site in days after the arrival of the Equipment at the Job Site. The open-case inspection fee shall be borne by the Buyer.

The Buyer shall inform the Seller of the date one (1) month before the date of open case inspection and shall also render assistance to the Seller’s representatives in their inspection work.

9.4 During the joint open-case inspection, a detailed inspection record shall be made and signed by the representatives of both parties.

In case the Seller is responsible for any defect or shortage of the Equipment, the inspection record shall be taken as an effective evidence for the Buyer to claim repair, replacement or supplement to the Seller. Any of such claims shall be lodged by the Buyer within month(s) after the arrival of the Equipment at the Job Site.

9.5 If any shortage, defect of or damage to the Equipment is found in open-case inspection not attributable to the Seller’s responsibility, the Seller shall make repair, replacement or supplement at the Buyer’s expenses in accordance with the separate agreement signed by both parties.

9.6 The Buyer is not entitled to open the case, assemble and/or disassemble the Equipment without the Seller’s prior written consent.

If there is no joint open case inspection due to the reasons not attributable to the Seller, the quantity and apparent quality of the Equipment shall be deemed correct and in perfect condition.

Article 10 Design and Design Liaison

10.1 The Buyer shall provide to the Seller within ____ ( ) days after the Effective Date of the Contract, all the design data which shall be taken as the design basis. The Seller shall not be liable to the Buyer for, and the Buyer shall indemnify the Seller and hold the Seller harmless from any damages or failure caused by the incompleteness, incorrectness and/or inaccuracy of any such information and data.

10.2 A design liaison meeting shall be held in the ____ ( ) month after receiving above mentioned design data, the Seller will dispatch his technical personnel to the Job Site to participate in the meeting. During the meeting period, the Seller will discuss with the Buyer the relevant design details. Both parties shall sign an agreement outlining the design details.

10.3 During the design liaison meeting, the Seller and the Buyer shall provide assistance to the other’s dispatched personnel in arranging entry visas to the respective countries. The expense incurred on the dispatched personnel shall be borne by the party respectively.

Article 11 Erection, Test Run, Commissioning, Performance Test and Acceptance

11.1 The Erection, Test Run, Commissioning, Performance Test shall be conducted by the Buyer.

11.2 Chief Representatives

11.2.1 Each party shall nominate one (1) Chief Representative to deal with the technical matters during the period from the start of the Erection to Acceptance of the Equipment.

11.2.2 Detailed arrangements shall be made through friendly discussions by the Chief Representatives of both parties. The Chief Representatives of both parties shall fully cooperate to carry out their duties stipulated in the Contract, however they have no right to revise, alter or amend the Contract without the written authorization of both parties.

11.2.3 The Chief Representatives of both parties shall communicate through Linking Sheet for the matters relative to opinions, suggestions and information. The linking sheet shall be countersigned by the other party.

11.3 Erection and Test Run

11.3.1 The Erection shall be completed by the Buyer in ____ ( ) days from the effective date of the Contract. The Seller’s Chief Representative shall arrive at the Job Site ____ ( ) days prior to the beginning of the Erection.

11.3.2 When Erection is completed and in full conformity with requirements of the Technical Documentation, a Certificate of Completion for Erection of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing said Certificate shall be deemed as the date of completion of Erection.

11.3.3 As soon as the completion of Erection, Test Run for single machine and the whole system of the Equipment shall be started.

11.3.4 When Test Run has been successfully performed, a Certificate of Completion for Test Run of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days. The date of signing the said Certificates shall be deemed as the date of completion of Test Run of the Equipment.

11.4 Commissioning and Performance Test

11.4.1 Within ____ ( ) days after the completion of the Test Run, the Buyer shall make available qualified operation and maintenance personnel, raw materials, spare parts, utilities and other matters required for the Commissioning. Detailed procedures such as instrument calibrating, items of recording, sampling methods and analyzing methods, which are necessary for the Commissioning shall be discussed and agreed upon by the Chief Representatives of both parties.

If in the opinion of both parties, the Equipment is ready for the Commissioning, both parties shall confirm the readiness for the Commissioning in writing.

11.4.2 The Commissioning of the Equipment shall be started immediately after the confirmation of the readiness for the Commissioning. The Commissioning period shall ____ ( ) days after commencement of the Commissioning.

11.4.3 When the Seller and the Buyer consider that stable operation of the Equipment has been achieved, the date of Performance Test shall be fixed by Chief Representatives of both parties.

11.4.4 The Seller shall have the right to access to the laboratory and testing facilities in order to take samples and make analytical tests. The sample taking and analytical test during the Commissioning period will be done in the presence of the Chief Representatives of both parties.

11.4.5 During the period of Commissioning until Acceptance of the Equipment, the Seller may use the Buyer’s stored spare parts. Should the Buyer’s stored spare parts be used by the Seller due to the Seller’s responsibility, the Seller shall replenish the stores with the same in time at Job Site; otherwise the Seller shall provide the same at the Buyer’s costs upon the Buyer’s timely request.

11.4.6 If the result of Performance Test has reached the guarantee figures as per Appendix 1, the Acceptance Certificate of the Equipment shall be signed by the Chief Representatives of both parties in two (2) originals, one for each party, within three (3) days.

11.4.7 If the Performance Test cannot meet guarantee figures specified in Appendix 1, both parties shall jointly make investigations so as to find out the reason for clarifying the responsibility.

11.4.8 If the guarantee figures are not met due to the Seller’s reason, the Buyer shall agree to give an extension of ____ ( ) months so that the Seller can make improvement or adjustment to the Equipment and conduct further Performance Test. All the costs and expenses for making improvement or adjustment to the Equipment shall be borne by the Seller.

11.4.9 During the extension period, if the guarantee figures are still not met due to the Seller’s reason, the Seller shall pay the liquidated damages as per Appendix 1 to the Buyer against the Acceptance Certificate signed by both parties.

The Seller’s aggregate liability to pay liquidated damages for failure to attain the performance guarantees shall not exceed ____ ( ) percent of the Equipment price. The Seller shall have no further liability whatsoever to the Buyer in respect of such failure after payment of the liquidated damages.

11.4.10 If the non-achievement of the guarantee figures is due to the reasons not attributable to the Seller, the Seller shall agree to give an extension of ____ ( ) months. During the extension period all costs thereto incurred for the adjustment of the Equipment, as well as the costs and expenses for the Seller’s technical personnel shall be borne by the Buyer. In case the guarantee figures still can not be achieved due to the reasons not attributable to the Seller in the extension period, the Equipment shall be accepted by the Buyer. Both parties shall sign the Acceptance Certificate.

11.5 Acceptance

11.5.1 Acceptance shall occur in respect of the Equipment when :

(a) Performance Test has been successfully completed as per the Article 11.4.6.; or

(b) The Performance Test has not been completed due to the reasons not attributable to the Seller such as delayed civil construction, lack of and/or any other inconformity of raw materials, spare parts of the Buyer’s scope of supply under Appendix 2, and utilities with the requirements of the Contract in the ____ ( ) months from the date of Bill of Lading of the Last Shipment; or

(c) The Seller has paid the liquidated damages as per Article 11.4.9; or

(d) The guarantee figures still can not be reached due to reasons not attributable to the Seller’s reason in the extension period as specified in Article 11.4.10; or

(e) The Buyer takes the single machine and the whole system of the Equipment into use without the Seller’s approval.

11.5.2 At any time after any of the events set out in Article 11.5.1 has occurred, the Seller may give a notice to the Buyer requesting the issuance of the Acceptance Certificate.

11.5.3 The Buyer shall within seven (7) days after receipt of the Seller’s notice, issue such Acceptance Certificate.

11.5.4 If within seven (7) days after receipt of the Seller’s notice, the Buyer fails to issue the Acceptance Certificate or fails to inform the Seller in writing, with convincing evidence, of the reason why the Buyer has not issued the Acceptance Certificate, the Equipment shall be deemed having been accepted on the seventh day of the Seller’s said notice.

11.5.5 After the Acceptance, the Seller’s responsibilities and obligations under the Contract shall be deemed having been fulfilled except those as stipulated in Article 12 and 14.

Article 12 Guarantee and Warranty

12.1 The Seller guarantees that:

(a) The Equipment supplied by the Seller shall be new and made of adequate materials, and in conformity with the technical requirements of the Contract;

(b) The Technical Documentation shall be complete, clear and correct.

12.2 The period of warranty given by the Seller under Article 12.1 shall be ____ ( ) months from the date of Acceptance or ____ ( ) months from the date of Last Shipment, whichever comes earlier.

12.3 Defect of the Equipment

12.3.1 During the Warranty Period, should any defect due to inferior materials or bad workmanship of the Equipment be found under normal operation, the Buyer shall give the Seller a notice stating the details, together with all available evidence.

The Seller shall take immediate action to eliminate the defect at the Seller’s expenses within the period agreed by both parties.

12.3.2 If certain defect can not be eliminated despite of several attempts, the Seller shall replace the defective parts with non-defective parts at the Seller’s costs and expenses.

12.3.3 If the defect is eliminated by the Buyer himself, subject to the Seller’s prior written consent, all the direct costs and expenses thus incurred shall be borne by the Seller.

12.3.4 The Seller may reduce the price of the defective Equipment according to the degree of inferiority or extent of damage as agreed by both parties. After the reduction the Seller shall be released from its obligations and liabilities.

12.3.5 During the Warranty Period, should any defect due to the Buyer’s improper operation or maintenance be found, the Seller will provide technical assistance to eliminate the defect or replace the defected parts upon Buyer’s requests. All the costs and expenses thus occurred shall be borne by the Buyer.

12.3.6 Subject to Article 12.3.1, The Seller shall not be responsible for any defect or damage to the Equipment arising out of any circumstances including but not limited to the following causes:

(a) Combination of the Equipment with any machinery, and/or component other than those supplied by the Seller; or

(b) Alteration, modification or repair without the Seller’s prior written consent; or

(c) Failure of the Buyer to follow the Technical Documentation and instructions of the Seller, including the Buyer’s improper operation and maintenance; or

(d) Normal wear and tear.

12.4 During the Warranty Period, should the Technical Documentation supplied by the Seller be found incomplete, unclear or incorrect due to the Seller’s reason, the Seller shall be liable to supplement, replace or correct the Technical Documentation free of charge.

12.5 The Seller shall in no respect be understood or interpreted as liable for the commercial development of the Contract Products. The Buyer shall undertake the risk of the commercial development of the Contract Products.

12.6 In no circumstances, whether as a result of breach of contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, shall the Seller or its subcontractors or suppliers be liable for loss of profit or revenues, loss of production, loss of use, loss of information or data, cost of capital, cost of substitute equipment, facilities, services or replacement power, downtime costs, claims of the Buyer’s customers for such damages, or for any special, consequential, incidental, indirect or exemplary damages.

12.7 Notwithstanding anything to the contrary provided in the Contract, the aggregate liability of the Seller to the Buyer , on all claims of any kind, whether in contract, warranty, indemnity, tort (including negligence), strict liability, or otherwise, arising out of the performance or breach of the Contract or use of any Equipment or exploration of the Patent and/or Know-how shall not exceed ____ ( ) percent of the total Contract price.

12.8 All Contractual obligations of the Seller shall be deemed as having been fulfilled upon the expiry date of the Warranty Period.

Article 13 Intellectual Property Right

13.1 The Seller represents that it is entitled or authorized to grant the license to the Buyer to use the Patent and/or Know-how for the purpose as specified in Article 3.

13.2 The Buyer shall not use such Patent and/or know-how received from the Seller for any purpose other than that as specified in this Contract.

13.3 Any intellectual property right or other technical information granted by the Seller to the Buyer shall remain the property of the Seller. In no circumstances shall any terms and conditions in this Contract be construed, deemed, or interpreted as transfer of title to the Buyer of any information which may be delivered to or accessed by the Buyer.

13.4 Registration of the Contract and Maintenance of Patent

13.4.1 The Buyer shall, after the Contract is signed between both parties, make sure that the Contract is registered with or filed to the competent authorities in the Buyer’s country if it is required by law.

13.4.2 The Seller shall, during the validity period of the Contract, make all reasonable efforts to maintain Patent in force in the territory as stipulated in Article 3.4.1 and bear the costs thus incurred. The Buyer shall not make any action or inaction which may lead to invalidation or compulsory licensing of the Patent.

13.5 Improvement and Grant-back

13.5.1 Should any Improvement be made by the Seller on Patent and/or Know-how within the validity period of the Contract, which shall be the exclusive property of the Seller, the Seller shall grant the Buyer a non-exclusive license to exploit such Improvement at latest __________months from its improving, provided that the license fee is agreed upon between both parties.

13.5.2 The Buyer shall be entitled to make Improvement on Patent and/or Know-how within the validity period of the Contract. The Seller shall have the right to obtain and make use of the Improvement. The license fee shall be discussed between both parties in due time.

13.5.3 Both parties shall keep Improvement confidential. Neither party shall be entitled to grant any third party a sub-license on Improvement made and provided by the other party without previous written consent of the other party.

Article 14 Confidentiality

14.1 After signing of the Contract, both parties shall keep secret all the contents, terms, conditions of the Contract.

14.2 The Buyer shall take proper measures to keep strictly confidential of Know-how, Technical Documentation, Improvement and any other secret information obtained or accessible to from the Seller. The Buyer shall not disclose any of them to any third party, and shall not make use of them without prior written consent of the Seller except otherwise stipulated in the Contract.

14.3 The Buyer may disclose the secret information as described in Article 14.2 to the personnel of its own, or of any related parties engaged in the performance of the Contract subject to Article 14.2, strictly to the extent as essential for the implementation of the Contract, provided that the individuals and/or parties accessing or may access such secret information are engaged to undertake in written form the same confidential liability of the Buyer to the Seller. Any breach of confidentiality obligations by any personnel from the Buyer or the Buyer’s related parties shall be deemed as breach of the Contract by the Buyer.

14.4 Notwithstanding this Article 14, the Seller may furnish to its sub-contractor such documents, data, and other information received from the Buyer to the extent required for performing the Contract, in which event the Seller shall obtain from such sub-contractor an undertaking of confidentiality similar to that imposed on the Seller under the Article 14.

14.5 This Article 14 shall survive the expiration or termination of the Contract.

14.6 The confidential obligation shall not apply to the information which:

A. now or hereafter enters the public domain; or

B. can be proved to have been in the possession of the Party at the time of disclosure and which was not previously obtained, directly or indirectly, from the other Party hereto; or

C. otherwise lawfully becomes available to either party from a third party under no obligation of confidentiality.

Article 15 Taxes and Duties

15.1 All taxes and duties in connection with the signing and performance of the Contract, levied by Governments of the People’s Republic of China, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Seller.

15.2. All taxes and duties in connection with the signing and performance of the Contract levied on the Buyer and Seller by the Buyer’s Governments, including but not limited to customs duties, income tax, sales tax, value-added tax etc., shall be borne and paid by the Buyer. The Buyer shall pay in due time and full amount and hold the Seller harmless from any taxes and duties in case incurred to the Seller in the signing and performance of the Contract.

15.3 All import taxes and duties for tools and/or instruments, which the Seller or the Seller’s personnel may bring to the Buyer’s country for the execution of the Contract, shall be borne and paid by the Buyer.

15.4 Any and all taxes and duties in connection with the signing and performance of the Contract levied in any place except the cases as specified in Article 15.1 are not included in the Contract price. Should the Seller make the relevant payment directly as the case may be, both Parties agree to amend the Contract price to fully compensate the Seller for the payment, and the Buyer shall fully refund the Seller for the relevant amount within_______( ) days from the Seller’s payment.

Article 16 Force Majeure

16.1 If either of the Contract parties is prevented from executing the Contract due to the event of Force Majeure such as war, riot, coup, embargo, flood, typhoon, tornado, snowstorm, earthquake and other events which could not be foreseen, avoided and overcome, the affected party shall notify the other party by fax within the shortest possible time of occurrences of the Force Majeure and send a certificate issued by competent authorities or agency certifying the event of the Force Majeure by registered or express mail within fourteen (14) days following its occurrence.

16.2 The affected party shall not be liable for any delay or failure in performing any of its obligations due to the event of Force Majeure. However the affected party shall inform the other party by fax the termination or elimination of the event of Force Majeure as soon as possible.

16.3 Both parties shall proceed with their obligations immediately upon the cease of the event of Force Majeure or the removal of the effects and the term of the Contract shall be extended correspondingly. Should the effect of the event of Force Majeure last for more than one hundred and twenty (120) days, either party shall have the right to terminate the Contract by a written notice.

Article 17 Applicable Law and Settlement of Disputes

17.1 The applicable law of the Contract shall be the laws of the People’s Republic of China.

17.2 All disputes arising from or in connection with the Contract shall be settled through friendly consultation between both parties. In case no agreement can be reached, the dispute shall be submitted for arbitration.

17.3 The arbitration shall be conducted by China International Economic and Trade Arbitration Commission (CIETAC) in Beijing in accordance with Arbitration Rules of the Commission in effect at the time of applying for arbitration. The tribunal shall be composed of three arbitrators.

17.4 The arbitral award shall be final and binding upon both parties.

17.5 During proceedings of arbitration, the undisputed part of the Contract shall be performed continuously by both parties regardless of such arbitration proceedings.

Article 18 Effectiveness, Term and Termination of the Contract

(a) The Seller and the Buyer sign the Contract;

(b) The Contract shall be approved by the competent authorities and/or banks of both parties (if applicable);

(c) The Seller receives the Down Payment;

(d) The Seller duly receives the L/C (or L/G ) issued by the Buyers Bank.

18.2 Each party shall use its best efforts to fulfill the above conditions for which it is responsible as soon as practicable.

18.3 If the Contract has not become effective pursuant to Article 18.1 within ____ ( ) months after the date of signing this Contract, the Seller has the right to make an equitable adjustment to the total Contract price and the time for delivery and/or other relevant conditions of the Contract. Should no agreement is reached for the above mentioned adjustment within ____ ( ) days from the Seller’s request of adjustment, the Seller shall be entitled to cancel the Contract.

18.4 The Contract shall be valid and remain in force for_____ (_____) years from the Date of Effectiveness, during which period the Buyer shall be entitled to manufacture the Contract Products with Patent and/or Know-how and sell the Contract Products within the licensed territory as specified in Article 3.4.

(Option 1) The Buyer shall not be entitled to manufacture with patent and/or know-how or sell the contract products after the aforesaid period unless the Buyer agrees to pay additional license fees in the amount and with the payment schedules and methods as agreed upon between both Parties in due time.

(Option 2) The Buyer shall be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after expiration of the Contract term specified above, provided that the Buyer shall not be released from its confidential obligations under the Contract.

(Option 3) The Buyer shall not be entitled to manufacture with Patent and/or Know-how or sell the Contract Products after the expiration of the Contract term specified above, and shall return to the Seller all the Technical Documentations specified in Appendix 4 without remaining any duplicate copies. Nevertheless the confidential obligations of the Buyer under Article 14 shall survive the Contract term.

18.5 Either party may, without prejudice to any other remedy for the other party’s following breach of the Contract, terminate the Contract in whole or in part by a written notice send to the other party, if the other party

A. fails to perform its payment obligation under the Contract and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

B. fails to perform its confidentiality obligation under the Contract; or

C. fails to perform any other obligations under the Contract except minor parts thereof, and does not remedy for its failure within a period of ______ (____) days upon receipt of the written notice or a period agreed upon between the parties; or

D. becomes bankrupt or insolvent, goes into liquidation, has a receiving or administration order made against him, compounds with his creditors, or carries on business under a receiver, trustee or manager for the benefit of his creditors, or dissolves, or ceases to do business, or be ordered to close down / to cease to do business / to dissolve, or has its business license revoked, or if any act is done or event occurs which (under applicable Laws) has a similar effect to any of these acts or events.

18.6 Either party may, without prejudice to any other remedy, terminate the Contract in whole or in part by a written notice send to the other party, if

A. The other party is prevented by the laws, statutes, rules or regulations of either country from performing its obligations under the Contract; or

B. The Seller is prevented by the relevant authority of the Buyer’s country from being paid in accordance with the Contract; or

C. The other party is prevented from performing its contractual obligations by any event of Force Majeure for more than one hundred and twenty (120) days.

18.7 In the event of termination of the Contract, without prejudice to any other remedies available according to the Contract and/or applicable laws,

The Buyer shall cease all its further exploitation of the Patent and/or Know-how and any acceptance of further orders from third parties for the Contract Products.

All the delivered literatures, drawings, samples, instruments, equipment, and other documents including the interpretations related to Patent and/or Know-how shall be returned to the Seller as the Seller’s requests.

All the contracts on sales of the Contract Products signed between the Buyer and third parties shall be terminated by the Buyer, otherwise the Seller shall be paid accordingly.

In case the termination is due to the Seller’s default, the Buyer shall be entitled to complete the performance of the contracts on sales of the Contract Products already signed between the Buyer and third parties before the termination.

The Seller shall be paid by the Buyer for all the contractual obligations performed by the Seller till the date of termination within _______days from receipt of the termination notice.

E. Termination of the Contract shall not release either party from its confidential obligations under the Contract

Article 19 Miscellaneous

19.1 The Contract is signed by the authorized representatives of both parties in ____ ( ) originals. Each party shall keep ____ ( ).

19.2 The Contract supersedes all communications, negotiations and agreements between the parties prior to the signing date of this Contract.

19.3 All amendments, supplements and alternations to terms of the Contract shall be made in written form and signed by the authorized representatives of both parties. These amendments, supplements and alternations shall form integral parts of the Contract.

If any costs occur or delivery delay due to amendment or explanation of the new law or statute or regulations enacted by the Buyer’s country after the effectiveness of the Contract，the Seller shall have the right to ask for necessary adjustment in relation to the Contract price and the delivery schedule.

19.4 No assignment, cession, novation, or transfer of any right or obligation under this Contract shall be made by either party to a third party without the prior written consent of the other party.

19.5 All communications between both parties in the course of implementation of the Contract should be in English language in written form at the address set forth below. The faxes concerning the important matters shall be confirmed in due time by registered or express mail or letter delivered by hand.

The Buyer:

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

The Seller :

Address:

Post Code:

Fax: __________________________

Tel.: __________________________

Email:__________________________

Attention: ______________________

IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly executed.

The Buyer:

The Seller:

By:______________________[Signature]

Name: [printed name]

By:_______________________ [Signature]

Name: [printed name]

Title:

Title:

Appendices

Appendix 1 Specifications and Guarantee Indices (Omitted)

家庭财产保险(样式二)

第九条 保险金额每份为10000元，其中房屋及室内装潢保险金额为8000元，室内财产保险金额为XX元。投保人根据投保时保险标的的实际价值确定保险金额及投保份数。投保多份的，保险金额总和超过保险价值的，超过部分无效。

保险投资金、保险费、收益金、年收益率和给付金

第十条 每份保险对应的保险投资金为XX元。

第十一条 投保每份保险的年保险费为12元。保险费由保险人从投资收益中获得，投保人无需在交纳保险投资金以外另行支付。

第十二条 年收益率是保险人用以计算保险合同期满后一次性支付给投保人的固定投资回报折合每年的比率。收益金为年收益率与保险投资金及保险期间内保险年度数的乘积。

第十三条 给付金是保险人按保险合同约定支付给投保人的给付金额。给付金包括满期给付金和退保给付金。满期给付金为保险投资金与收益金之和；退保给付金为退保时保险人根据第三十二条规定支付给投保人的金额。给付金不受保险事故是否发生及被保险人是否已经获得保险赔偿的影响。

保险期间和保险年度

第十四条 保险期间由投保人在《金牛保险合同收益一览表》给出的选择中确定一种，中途不得变更。从保险责任开始之日起，每12个月为一个保险年度。

投保人、被保险人义务

第十五条 投保人应在投保时一次性交清保险投资金。保险合同在投保人一次性交清保险投资金后生效。

第十六条 投保人应履行如实告知义务，如实回答保险人就保险标的或者被保险人的有关情况提出的询问。

投保人故意隐瞒事实不履行如实告知义务的，或者因过失未履行如实告知义务并且足以影响保险人决定是否同意承保或者提高保险费率的，保险合同自保险人解约通知书到达之日起解除。

如果投保人故意不履行如实告知义务，或者因过失未履行如实告知义务并且对保险事故的发生有严重影响的，保险人有权拒绝赔偿。

第十七条 投保人确定多个被保险人的，应在本保险合同中列明。投保人确定的被保险人不是投保人本人的，应征得被保险人的书面同意。

在本保险期间内，投保人变更被保险人的，应征得被保险人书面同意，并及时通知保险人，办理变更手续。

第十八条 被保险人应当遵照国家有关消防、安全方面的规定，维护保险标的的安全。

第十九条 在本保险期间内，保险标的情况发生变化，投保人或被保险人应当及时通知保险人，经与保险人协商一致后，变更保险合同有关内容。

第二十条 保险标的遭受损失时，被保险人应当积极施救，使损失减少至最低程度，同时应在二十四小时内通知保险人，并在事故发生后五个工作日内以书面形式通知保险人事故发生的原因、经过和损失情况。

第二十一条 投保人或被保险人如不履行第十七条至第二十条约定的任何一项义务，保险人不负赔偿责任，或从解约通知书送达之日起解除本保险合同。

赔偿处理

第二十二条 保险标的发生保险责任范围内的损失，保险人在保险金额范围内按实际损失计算赔偿，但下列约定优先适用：

（一）发生盗抢责任范围内的损失时，保险期间每年的最高赔偿金额每份1000元；

（二）发生管道破裂及水渍责任范围内的损失时，保险期间每年的最高赔偿金额每份不得超过1000元；

共4页，当前第2页1234

我国期货交易所合约

├──────────────────┼──┼────────────┤

│四乙基铅含量g/kg不大于 │1.0 │ gb377 │

├──────────────────┼──┼────────────┤

│馏程: │ │ │

│ 10%馏出温度，℃不高于 │ 79 │ │

│ 50%馏出温度，℃不高于 │145 │ │

│ 90%馏出温度，℃不高于 │195 │ gb255 │

│ 干点， ℃不大于 │205 │ │

│ 残留量，%不大于 │1.5 │ │

│残留量及损失% 不大于 │4.5 │ │

├──────────────────┼──┼────────────┤

│饱和蒸汽压 kpa(1) │ │ │

│从9月1日至2月29日 不大于 │ 80 │ gb257 │

│从3月1日至8月31日 不大于？ │ 67 │ │

├──────────────────┼──┼────────────┤

│实际胶质mg/100ml不大于 │ 5 │ gb509 │

├──────────────────┼──┼────────────┤

│诱导期min不小于 │480 │ bg256 │

├──────────────────┼──┼────────────┤

│硫含量%不大于 │0.15│ gb380 │

├──────────────────┼──┼────────────┤

│腐蚀(铜片 50℃3hr) │合格│ gb378 │

├──────────────────┼──┼────────────┤

│水溶性酸或碱 │ 无 │ bg259 │

├──────────────────┼──┼────────────┤

│酸度mgkoh/100ml不大于 │ 3 │ gb258及注 │

│ │ │ (2) │

├──────────────────┼──┼────────────┤

│机械杂质及水分 │ 无 │ 注(3) │

└──────────────--------┴--─┴────────────┘

注：(1)1kpa=7.5mmhg。

(2)加铅汽油酸度按gb379方法测定。

(3)按gb511和gb260方法测定。

上海金属交易所规货合同

┌─────────────────┬────────────────┐

共11页，当前第8页1234567891011